diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/plat-iop')
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/plat-iop/Makefile | 35 | ||||
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/plat-iop/adma.c | 207 | ||||
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/plat-iop/cp6.c | 51 | ||||
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/plat-iop/gpio.c | 92 | ||||
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/plat-iop/i2c.c | 79 | ||||
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/plat-iop/pci.c | 417 | ||||
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/plat-iop/pmu.c | 40 | ||||
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/plat-iop/restart.c | 20 | ||||
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/plat-iop/setup.c | 39 | ||||
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/plat-iop/time.c | 175 |
10 files changed, 0 insertions, 1155 deletions
diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/Makefile b/ANDROID_3.4.5/arch/arm/plat-iop/Makefile deleted file mode 100644 index a99dc15a..00000000 --- a/ANDROID_3.4.5/arch/arm/plat-iop/Makefile +++ /dev/null @@ -1,35 +0,0 @@ -# -# Makefile for the linux kernel. -# - -obj-y := - -# IOP32X -obj-$(CONFIG_ARCH_IOP32X) += gpio.o -obj-$(CONFIG_ARCH_IOP32X) += i2c.o -obj-$(CONFIG_ARCH_IOP32X) += pci.o -obj-$(CONFIG_ARCH_IOP32X) += setup.o -obj-$(CONFIG_ARCH_IOP32X) += time.o -obj-$(CONFIG_ARCH_IOP32X) += cp6.o -obj-$(CONFIG_ARCH_IOP32X) += adma.o -obj-$(CONFIG_ARCH_IOP32X) += pmu.o -obj-$(CONFIG_ARCH_IOP32X) += restart.o - -# IOP33X -obj-$(CONFIG_ARCH_IOP33X) += gpio.o -obj-$(CONFIG_ARCH_IOP33X) += i2c.o -obj-$(CONFIG_ARCH_IOP33X) += pci.o -obj-$(CONFIG_ARCH_IOP33X) += setup.o -obj-$(CONFIG_ARCH_IOP33X) += time.o -obj-$(CONFIG_ARCH_IOP33X) += cp6.o -obj-$(CONFIG_ARCH_IOP33X) += adma.o -obj-$(CONFIG_ARCH_IOP33X) += pmu.o -obj-$(CONFIG_ARCH_IOP33X) += restart.o - -# IOP13XX -obj-$(CONFIG_ARCH_IOP13XX) += cp6.o -obj-$(CONFIG_ARCH_IOP13XX) += time.o - -obj-m := -obj-n := -obj- := diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/adma.c b/ANDROID_3.4.5/arch/arm/plat-iop/adma.c deleted file mode 100644 index 1ff6a37e..00000000 --- a/ANDROID_3.4.5/arch/arm/plat-iop/adma.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - * platform device definitions for the iop3xx dma/xor engines - * Copyright © 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ -#include <linux/platform_device.h> -#include <asm/hardware/iop3xx.h> -#include <linux/dma-mapping.h> -#include <mach/adma.h> -#include <asm/hardware/iop_adma.h> - -#ifdef CONFIG_ARCH_IOP32X -#define IRQ_DMA0_EOT IRQ_IOP32X_DMA0_EOT -#define IRQ_DMA0_EOC IRQ_IOP32X_DMA0_EOC -#define IRQ_DMA0_ERR IRQ_IOP32X_DMA0_ERR - -#define IRQ_DMA1_EOT IRQ_IOP32X_DMA1_EOT -#define IRQ_DMA1_EOC IRQ_IOP32X_DMA1_EOC -#define IRQ_DMA1_ERR IRQ_IOP32X_DMA1_ERR - -#define IRQ_AA_EOT IRQ_IOP32X_AA_EOT -#define IRQ_AA_EOC IRQ_IOP32X_AA_EOC -#define IRQ_AA_ERR IRQ_IOP32X_AA_ERR -#endif -#ifdef CONFIG_ARCH_IOP33X -#define IRQ_DMA0_EOT IRQ_IOP33X_DMA0_EOT -#define IRQ_DMA0_EOC IRQ_IOP33X_DMA0_EOC -#define IRQ_DMA0_ERR IRQ_IOP33X_DMA0_ERR - -#define IRQ_DMA1_EOT IRQ_IOP33X_DMA1_EOT -#define IRQ_DMA1_EOC IRQ_IOP33X_DMA1_EOC -#define IRQ_DMA1_ERR IRQ_IOP33X_DMA1_ERR - -#define IRQ_AA_EOT IRQ_IOP33X_AA_EOT -#define IRQ_AA_EOC IRQ_IOP33X_AA_EOC -#define IRQ_AA_ERR IRQ_IOP33X_AA_ERR -#endif -/* AAU and DMA Channels */ -static struct resource iop3xx_dma_0_resources[] = { - [0] = { - .start = IOP3XX_DMA_PHYS_BASE(0), - .end = IOP3XX_DMA_UPPER_PA(0), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DMA0_EOT, - .end = IRQ_DMA0_EOT, - .flags = IORESOURCE_IRQ - }, - [2] = { - .start = IRQ_DMA0_EOC, - .end = IRQ_DMA0_EOC, - .flags = IORESOURCE_IRQ - }, - [3] = { - .start = IRQ_DMA0_ERR, - .end = IRQ_DMA0_ERR, - .flags = IORESOURCE_IRQ - } -}; - -static struct resource iop3xx_dma_1_resources[] = { - [0] = { - .start = IOP3XX_DMA_PHYS_BASE(1), - .end = IOP3XX_DMA_UPPER_PA(1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DMA1_EOT, - .end = IRQ_DMA1_EOT, - .flags = IORESOURCE_IRQ - }, - [2] = { - .start = IRQ_DMA1_EOC, - .end = IRQ_DMA1_EOC, - .flags = IORESOURCE_IRQ - }, - [3] = { - .start = IRQ_DMA1_ERR, - .end = IRQ_DMA1_ERR, - .flags = IORESOURCE_IRQ - } -}; - - -static struct resource iop3xx_aau_resources[] = { - [0] = { - .start = IOP3XX_AAU_PHYS_BASE, - .end = IOP3XX_AAU_UPPER_PA, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_AA_EOT, - .end = IRQ_AA_EOT, - .flags = IORESOURCE_IRQ - }, - [2] = { - .start = IRQ_AA_EOC, - .end = IRQ_AA_EOC, - .flags = IORESOURCE_IRQ - }, - [3] = { - .start = IRQ_AA_ERR, - .end = IRQ_AA_ERR, - .flags = IORESOURCE_IRQ - } -}; - -static u64 iop3xx_adma_dmamask = DMA_BIT_MASK(32); - -static struct iop_adma_platform_data iop3xx_dma_0_data = { - .hw_id = DMA0_ID, - .pool_size = PAGE_SIZE, -}; - -static struct iop_adma_platform_data iop3xx_dma_1_data = { - .hw_id = DMA1_ID, - .pool_size = PAGE_SIZE, -}; - -static struct iop_adma_platform_data iop3xx_aau_data = { - .hw_id = AAU_ID, - .pool_size = 3 * PAGE_SIZE, -}; - -struct platform_device iop3xx_dma_0_channel = { - .name = "iop-adma", - .id = 0, - .num_resources = 4, - .resource = iop3xx_dma_0_resources, - .dev = { - .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *) &iop3xx_dma_0_data, - }, -}; - -struct platform_device iop3xx_dma_1_channel = { - .name = "iop-adma", - .id = 1, - .num_resources = 4, - .resource = iop3xx_dma_1_resources, - .dev = { - .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *) &iop3xx_dma_1_data, - }, -}; - -struct platform_device iop3xx_aau_channel = { - .name = "iop-adma", - .id = 2, - .num_resources = 4, - .resource = iop3xx_aau_resources, - .dev = { - .dma_mask = &iop3xx_adma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(64), - .platform_data = (void *) &iop3xx_aau_data, - }, -}; - -static int __init iop3xx_adma_cap_init(void) -{ - #ifdef CONFIG_ARCH_IOP32X /* the 32x DMA does not perform CRC32C */ - dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask); - dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask); - #else - dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask); - dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask); - #endif - - #ifdef CONFIG_ARCH_IOP32X /* the 32x DMA does not perform CRC32C */ - dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask); - dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask); - #else - dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask); - dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask); - #endif - - #ifdef CONFIG_ARCH_IOP32X /* the 32x AAU does not perform zero sum */ - dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask); - dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask); - dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask); - #else - dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask); - dma_cap_set(DMA_XOR_VAL, iop3xx_aau_data.cap_mask); - dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask); - dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask); - #endif - - return 0; -} - -arch_initcall(iop3xx_adma_cap_init); diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/cp6.c b/ANDROID_3.4.5/arch/arm/plat-iop/cp6.c deleted file mode 100644 index bab73e2c..00000000 --- a/ANDROID_3.4.5/arch/arm/plat-iop/cp6.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * IOP Coprocessor-6 access handler - * Copyright (c) 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - */ -#include <linux/init.h> -#include <asm/traps.h> -#include <asm/ptrace.h> - -static int cp6_trap(struct pt_regs *regs, unsigned int instr) -{ - u32 temp; - - /* enable cp6 access */ - asm volatile ( - "mrc p15, 0, %0, c15, c1, 0\n\t" - "orr %0, %0, #(1 << 6)\n\t" - "mcr p15, 0, %0, c15, c1, 0\n\t" - : "=r"(temp)); - - return 0; -} - -/* permit kernel space cp6 access - * deny user space cp6 access - */ -static struct undef_hook cp6_hook = { - .instr_mask = 0x0f000ff0, - .instr_val = 0x0e000610, - .cpsr_mask = MODE_MASK, - .cpsr_val = SVC_MODE, - .fn = cp6_trap, -}; - -void __init iop_init_cp6_handler(void) -{ - register_undef_hook(&cp6_hook); -} diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/gpio.c b/ANDROID_3.4.5/arch/arm/plat-iop/gpio.c deleted file mode 100644 index e4de9be7..00000000 --- a/ANDROID_3.4.5/arch/arm/plat-iop/gpio.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * arch/arm/plat-iop/gpio.c - * GPIO handling for Intel IOP3xx processors. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include <linux/device.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/gpio.h> -#include <linux/export.h> -#include <asm/hardware/iop3xx.h> - -void gpio_line_config(int line, int direction) -{ - unsigned long flags; - - local_irq_save(flags); - if (direction == GPIO_IN) { - *IOP3XX_GPOE |= 1 << line; - } else if (direction == GPIO_OUT) { - *IOP3XX_GPOE &= ~(1 << line); - } - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_line_config); - -int gpio_line_get(int line) -{ - return !!(*IOP3XX_GPID & (1 << line)); -} -EXPORT_SYMBOL(gpio_line_get); - -void gpio_line_set(int line, int value) -{ - unsigned long flags; - - local_irq_save(flags); - if (value == GPIO_LOW) { - *IOP3XX_GPOD &= ~(1 << line); - } else if (value == GPIO_HIGH) { - *IOP3XX_GPOD |= 1 << line; - } - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_line_set); - -static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) -{ - gpio_line_config(gpio, GPIO_IN); - return 0; -} - -static int iop3xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level) -{ - gpio_line_set(gpio, level); - gpio_line_config(gpio, GPIO_OUT); - return 0; -} - -static int iop3xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio) -{ - return gpio_line_get(gpio); -} - -static void iop3xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value) -{ - gpio_line_set(gpio, value); -} - -static struct gpio_chip iop3xx_chip = { - .label = "iop3xx", - .direction_input = iop3xx_gpio_direction_input, - .get = iop3xx_gpio_get_value, - .direction_output = iop3xx_gpio_direction_output, - .set = iop3xx_gpio_set_value, - .base = 0, - .ngpio = IOP3XX_N_GPIOS, -}; - -static int __init iop3xx_gpio_setup(void) -{ - return gpiochip_add(&iop3xx_chip); -} -arch_initcall(iop3xx_gpio_setup); diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/i2c.c b/ANDROID_3.4.5/arch/arm/plat-iop/i2c.c deleted file mode 100644 index 88215ad0..00000000 --- a/ANDROID_3.4.5/arch/arm/plat-iop/i2c.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * arch/arm/plat-iop/i2c.c - * - * Author: Nicolas Pitre <nico@cam.org> - * Copyright (C) 2001 MontaVista Software, Inc. - * Copyright (C) 2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/major.h> -#include <linux/fs.h> -#include <linux/platform_device.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_core.h> -#include <linux/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/hardware/iop3xx.h> -#include <asm/mach/arch.h> - -#ifdef CONFIG_ARCH_IOP32X -#define IRQ_IOP3XX_I2C_0 IRQ_IOP32X_I2C_0 -#define IRQ_IOP3XX_I2C_1 IRQ_IOP32X_I2C_1 -#endif -#ifdef CONFIG_ARCH_IOP33X -#define IRQ_IOP3XX_I2C_0 IRQ_IOP33X_I2C_0 -#define IRQ_IOP3XX_I2C_1 IRQ_IOP33X_I2C_1 -#endif - -static struct resource iop3xx_i2c0_resources[] = { - [0] = { - .start = 0xfffff680, - .end = 0xfffff697, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP3XX_I2C_0, - .end = IRQ_IOP3XX_I2C_0, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device iop3xx_i2c0_device = { - .name = "IOP3xx-I2C", - .id = 0, - .num_resources = 2, - .resource = iop3xx_i2c0_resources, -}; - - -static struct resource iop3xx_i2c1_resources[] = { - [0] = { - .start = 0xfffff6a0, - .end = 0xfffff6b7, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IOP3XX_I2C_1, - .end = IRQ_IOP3XX_I2C_1, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device iop3xx_i2c1_device = { - .name = "IOP3xx-I2C", - .id = 1, - .num_resources = 2, - .resource = iop3xx_i2c1_resources, -}; diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/pci.c b/ANDROID_3.4.5/arch/arm/plat-iop/pci.c deleted file mode 100644 index 0da42058..00000000 --- a/ANDROID_3.4.5/arch/arm/plat-iop/pci.c +++ /dev/null @@ -1,417 +0,0 @@ -/* - * arch/arm/plat-iop/pci.c - * - * PCI support for the Intel IOP32X and IOP33X processors - * - * Author: Rory Bolt <rorybolt@pacbell.net> - * Copyright (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <asm/irq.h> -#include <asm/signal.h> -#include <mach/hardware.h> -#include <asm/mach/pci.h> -#include <asm/hardware/iop3xx.h> - -// #define DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) do { } while (0) -#endif - -/* - * This routine builds either a type0 or type1 configuration command. If the - * bus is on the 803xx then a type0 made, else a type1 is created. - */ -static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where) -{ - struct pci_sys_data *sys = bus->sysdata; - u32 addr; - - if (sys->busnr == bus->number) - addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11); - else - addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1; - - addr |= PCI_FUNC(devfn) << 8 | (where & ~3); - - return addr; -} - -/* - * This routine checks the status of the last configuration cycle. If an error - * was detected it returns a 1, else it returns a 0. The errors being checked - * are parity, master abort, target abort (master and target). These types of - * errors occur during a config cycle where there is no device, like during - * the discovery stage. - */ -static int iop3xx_pci_status(void) -{ - unsigned int status; - int ret = 0; - - /* - * Check the status registers. - */ - status = *IOP3XX_ATUSR; - if (status & 0xf900) { - DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status); - *IOP3XX_ATUSR = status & 0xf900; - ret = 1; - } - - status = *IOP3XX_ATUISR; - if (status & 0x679f) { - DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status); - *IOP3XX_ATUISR = status & 0x679f; - ret = 1; - } - - return ret; -} - -/* - * Simply write the address register and read the configuration - * data. Note that the 4 nops ensure that we are able to handle - * a delayed abort (in theory.) - */ -static u32 iop3xx_read(unsigned long addr) -{ - u32 val; - - __asm__ __volatile__( - "str %1, [%2]\n\t" - "ldr %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : "=r" (val) - : "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR)); - - return val; -} - -/* - * The read routines must check the error status of the last configuration - * cycle. If there was an error, the routine returns all hex f's. - */ -static int -iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - unsigned long addr = iop3xx_cfg_address(bus, devfn, where); - u32 val = iop3xx_read(addr) >> ((where & 3) * 8); - - if (iop3xx_pci_status()) - val = 0xffffffff; - - *value = val; - - return PCIBIOS_SUCCESSFUL; -} - -static int -iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - unsigned long addr = iop3xx_cfg_address(bus, devfn, where); - u32 val; - - if (size != 4) { - val = iop3xx_read(addr); - if (iop3xx_pci_status()) - return PCIBIOS_SUCCESSFUL; - - where = (where & 3) * 8; - - if (size == 1) - val &= ~(0xff << where); - else - val &= ~(0xffff << where); - - *IOP3XX_OCCDR = val | value << where; - } else { - asm volatile( - "str %1, [%2]\n\t" - "str %0, [%3]\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : - : "r" (value), "r" (addr), - "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR)); - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops iop3xx_ops = { - .read = iop3xx_read_config, - .write = iop3xx_write_config, -}; - -/* - * When a PCI device does not exist during config cycles, the 80200 gets a - * bus error instead of returning 0xffffffff. This handler simply returns. - */ -static int -iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n", - addr, fsr, regs->ARM_pc, regs->ARM_lr); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -int iop3xx_pci_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if (nr != 0) - return 0; - - res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL); - if (!res) - panic("PCI: unable to alloc resources"); - - res[0].start = IOP3XX_PCI_LOWER_IO_PA; - res[0].end = IOP3XX_PCI_LOWER_IO_PA + IOP3XX_PCI_IO_WINDOW_SIZE - 1; - res[0].name = "IOP3XX PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - request_resource(&ioport_resource, &res[0]); - - res[1].start = IOP3XX_PCI_LOWER_MEM_PA; - res[1].end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1; - res[1].name = "IOP3XX PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - request_resource(&iomem_resource, &res[1]); - - /* - * Use whatever translation is already setup. - */ - sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0; - sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR; - - pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); - pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); - - return 1; -} - -struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *sys) -{ - return pci_scan_root_bus(NULL, sys->busnr, &iop3xx_ops, sys, - &sys->resources); -} - -void __init iop3xx_atu_setup(void) -{ - /* BAR 0 ( Disabled ) */ - *IOP3XX_IAUBAR0 = 0x0; - *IOP3XX_IABAR0 = 0x0; - *IOP3XX_IATVR0 = 0x0; - *IOP3XX_IALR0 = 0x0; - - /* BAR 1 ( Disabled ) */ - *IOP3XX_IAUBAR1 = 0x0; - *IOP3XX_IABAR1 = 0x0; - *IOP3XX_IALR1 = 0x0; - - /* BAR 2 (1:1 mapping with Physical RAM) */ - /* Set limit and enable */ - *IOP3XX_IALR2 = ~((u32)IOP3XX_MAX_RAM_SIZE - 1) & ~0x1; - *IOP3XX_IAUBAR2 = 0x0; - - /* Align the inbound bar with the base of memory */ - *IOP3XX_IABAR2 = PHYS_OFFSET | - PCI_BASE_ADDRESS_MEM_TYPE_64 | - PCI_BASE_ADDRESS_MEM_PREFETCH; - - *IOP3XX_IATVR2 = PHYS_OFFSET; - - /* Outbound window 0 */ - *IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA; - *IOP3XX_OUMWTVR0 = 0; - - /* Outbound window 1 */ - *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + - IOP3XX_PCI_MEM_WINDOW_SIZE / 2; - *IOP3XX_OUMWTVR1 = 0; - - /* BAR 3 ( Disabled ) */ - *IOP3XX_IAUBAR3 = 0x0; - *IOP3XX_IABAR3 = 0x0; - *IOP3XX_IATVR3 = 0x0; - *IOP3XX_IALR3 = 0x0; - - /* Setup the I/O Bar - */ - *IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA; - - /* Enable inbound and outbound cycles - */ - *IOP3XX_ATUCMD |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - *IOP3XX_ATUCR |= IOP3XX_ATUCR_OUT_EN; -} - -void __init iop3xx_atu_disable(void) -{ - *IOP3XX_ATUCMD = 0; - *IOP3XX_ATUCR = 0; - - /* wait for cycles to quiesce */ - while (*IOP3XX_PCSR & (IOP3XX_PCSR_OUT_Q_BUSY | - IOP3XX_PCSR_IN_Q_BUSY)) - cpu_relax(); - - /* BAR 0 ( Disabled ) */ - *IOP3XX_IAUBAR0 = 0x0; - *IOP3XX_IABAR0 = 0x0; - *IOP3XX_IATVR0 = 0x0; - *IOP3XX_IALR0 = 0x0; - - /* BAR 1 ( Disabled ) */ - *IOP3XX_IAUBAR1 = 0x0; - *IOP3XX_IABAR1 = 0x0; - *IOP3XX_IALR1 = 0x0; - - /* BAR 2 ( Disabled ) */ - *IOP3XX_IAUBAR2 = 0x0; - *IOP3XX_IABAR2 = 0x0; - *IOP3XX_IATVR2 = 0x0; - *IOP3XX_IALR2 = 0x0; - - /* BAR 3 ( Disabled ) */ - *IOP3XX_IAUBAR3 = 0x0; - *IOP3XX_IABAR3 = 0x0; - *IOP3XX_IATVR3 = 0x0; - *IOP3XX_IALR3 = 0x0; - - /* Clear the outbound windows */ - *IOP3XX_OIOWTVR = 0; - - /* Outbound window 0 */ - *IOP3XX_OMWTVR0 = 0; - *IOP3XX_OUMWTVR0 = 0; - - /* Outbound window 1 */ - *IOP3XX_OMWTVR1 = 0; - *IOP3XX_OUMWTVR1 = 0; -} - -/* Flag to determine whether the ATU is initialized and the PCI bus scanned */ -int init_atu; - -int iop3xx_get_init_atu(void) { - /* check if default has been overridden */ - if (init_atu != IOP3XX_INIT_ATU_DEFAULT) - return init_atu; - else - return IOP3XX_INIT_ATU_DISABLE; -} - -static void __init iop3xx_atu_debug(void) -{ - DBG("PCI: Intel IOP3xx PCI init.\n"); - DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n", - *IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0); - DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n", - *IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1); - DBG("PCI: Outbound IO window: PCI 0x%08x\n", - *IOP3XX_OIOWTVR); - - DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n", - *IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0); - DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n", - *IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1); - DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n", - *IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2); - DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n", - *IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3); - - DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n", - 0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR); - - DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD); - DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR); - - hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort"); -} - -/* for platforms that might be host-bus-adapters */ -void __init iop3xx_pci_preinit_cond(void) -{ - if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) { - iop3xx_atu_disable(); - iop3xx_atu_setup(); - iop3xx_atu_debug(); - } -} - -void __init iop3xx_pci_preinit(void) -{ - pcibios_min_io = 0; - pcibios_min_mem = 0; - - iop3xx_atu_disable(); - iop3xx_atu_setup(); - iop3xx_atu_debug(); -} - -/* allow init_atu to be user overridden */ -static int __init iop3xx_init_atu_setup(char *str) -{ - init_atu = IOP3XX_INIT_ATU_DEFAULT; - if (str) { - while (*str != '\0') { - switch (*str) { - case 'y': - case 'Y': - init_atu = IOP3XX_INIT_ATU_ENABLE; - break; - case 'n': - case 'N': - init_atu = IOP3XX_INIT_ATU_DISABLE; - break; - case ',': - case '=': - break; - default: - printk(KERN_DEBUG "\"%s\" malformed at " - "character: \'%c\'", - __func__, - *str); - *(str + 1) = '\0'; - } - str++; - } - } - - return 1; -} - -__setup("iop3xx_init_atu", iop3xx_init_atu_setup); - diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/pmu.c b/ANDROID_3.4.5/arch/arm/plat-iop/pmu.c deleted file mode 100644 index a2024b86..00000000 --- a/ANDROID_3.4.5/arch/arm/plat-iop/pmu.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * PMU IRQ registration for the iop3xx xscale PMU families. - * Copyright (C) 2010 Will Deacon, ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/platform_device.h> -#include <asm/pmu.h> -#include <mach/irqs.h> - -static struct resource pmu_resource = { -#ifdef CONFIG_ARCH_IOP32X - .start = IRQ_IOP32X_CORE_PMU, - .end = IRQ_IOP32X_CORE_PMU, -#endif -#ifdef CONFIG_ARCH_IOP33X - .start = IRQ_IOP33X_CORE_PMU, - .end = IRQ_IOP33X_CORE_PMU, -#endif - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device pmu_device = { - .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, - .resource = &pmu_resource, - .num_resources = 1, -}; - -static int __init iop3xx_pmu_init(void) -{ - platform_device_register(&pmu_device); - return 0; -} - -arch_initcall(iop3xx_pmu_init); diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/restart.c b/ANDROID_3.4.5/arch/arm/plat-iop/restart.c deleted file mode 100644 index 33fa699a..00000000 --- a/ANDROID_3.4.5/arch/arm/plat-iop/restart.c +++ /dev/null @@ -1,20 +0,0 @@ -/* - * restart.c - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <asm/hardware/iop3xx.h> -#include <asm/system_misc.h> -#include <mach/hardware.h> - -void iop3xx_restart(char mode, const char *cmd) -{ - *IOP3XX_PCSR = 0x30; - - /* Jump into ROM at address 0 */ - soft_restart(0); -} diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/setup.c b/ANDROID_3.4.5/arch/arm/plat-iop/setup.c deleted file mode 100644 index bade586f..00000000 --- a/ANDROID_3.4.5/arch/arm/plat-iop/setup.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * arch/arm/plat-iop/setup.c - * - * Author: Nicolas Pitre <nico@fluxnic.net> - * Copyright (C) 2001 MontaVista Software, Inc. - * Copyright (C) 2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <asm/mach/map.h> -#include <asm/hardware/iop3xx.h> - -/* - * Standard IO mapping for all IOP3xx based systems. Note that - * the IOP3xx OCCDR must be mapped uncached and unbuffered. - */ -static struct map_desc iop3xx_std_desc[] __initdata = { - { /* mem mapped registers */ - .virtual = IOP3XX_PERIPHERAL_VIRT_BASE, - .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE), - .length = IOP3XX_PERIPHERAL_SIZE, - .type = MT_UNCACHED, - }, { /* PCI IO space */ - .virtual = IOP3XX_PCI_LOWER_IO_VA, - .pfn = __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA), - .length = IOP3XX_PCI_IO_WINDOW_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init iop3xx_map_io(void) -{ - iotable_init(iop3xx_std_desc, ARRAY_SIZE(iop3xx_std_desc)); -} diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/time.c b/ANDROID_3.4.5/arch/arm/plat-iop/time.c deleted file mode 100644 index cbfbbe46..00000000 --- a/ANDROID_3.4.5/arch/arm/plat-iop/time.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * arch/arm/plat-iop/time.c - * - * Timer code for IOP32x and IOP33x based systems - * - * Author: Deepak Saxena <dsaxena@mvista.com> - * - * Copyright 2002-2003 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/init.h> -#include <linux/timex.h> -#include <linux/io.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/export.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/sched_clock.h> -#include <asm/uaccess.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <mach/time.h> - -/* - * Minimum clocksource/clockevent timer range in seconds - */ -#define IOP_MIN_RANGE 4 - -/* - * IOP clocksource (free-running timer 1). - */ -static cycle_t notrace iop_clocksource_read(struct clocksource *unused) -{ - return 0xffffffffu - read_tcr1(); -} - -static struct clocksource iop_clocksource = { - .name = "iop_timer1", - .rating = 300, - .read = iop_clocksource_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -/* - * IOP sched_clock() implementation via its clocksource. - */ -static u32 notrace iop_read_sched_clock(void) -{ - return 0xffffffffu - read_tcr1(); -} - -/* - * IOP clockevents (interrupting timer 0). - */ -static int iop_set_next_event(unsigned long delta, - struct clock_event_device *unused) -{ - u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1; - - BUG_ON(delta == 0); - write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD)); - write_tcr0(delta); - write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN); - - return 0; -} - -static unsigned long ticks_per_jiffy; - -static void iop_set_mode(enum clock_event_mode mode, - struct clock_event_device *unused) -{ - u32 tmr = read_tmr0(); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - write_tmr0(tmr & ~IOP_TMR_EN); - write_tcr0(ticks_per_jiffy - 1); - write_trr0(ticks_per_jiffy - 1); - tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* ->set_next_event sets period and enables timer */ - tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN); - break; - case CLOCK_EVT_MODE_RESUME: - tmr |= IOP_TMR_EN; - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - default: - tmr &= ~IOP_TMR_EN; - break; - } - - write_tmr0(tmr); -} - -static struct clock_event_device iop_clockevent = { - .name = "iop_timer0", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .rating = 300, - .set_next_event = iop_set_next_event, - .set_mode = iop_set_mode, -}; - -static irqreturn_t -iop_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - write_tisr(1); - evt->event_handler(evt); - return IRQ_HANDLED; -} - -static struct irqaction iop_timer_irq = { - .name = "IOP Timer Tick", - .handler = iop_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .dev_id = &iop_clockevent, -}; - -static unsigned long iop_tick_rate; -unsigned long get_iop_tick_rate(void) -{ - return iop_tick_rate; -} -EXPORT_SYMBOL(get_iop_tick_rate); - -void __init iop_init_time(unsigned long tick_rate) -{ - u32 timer_ctl; - - setup_sched_clock(iop_read_sched_clock, 32, tick_rate); - - ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ); - iop_tick_rate = tick_rate; - - timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED | - IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1; - - /* - * Set up interrupting clockevent timer 0. - */ - write_tmr0(timer_ctl & ~IOP_TMR_EN); - write_tisr(1); - setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq); - clockevents_calc_mult_shift(&iop_clockevent, - tick_rate, IOP_MIN_RANGE); - iop_clockevent.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &iop_clockevent); - iop_clockevent.min_delta_ns = - clockevent_delta2ns(0xf, &iop_clockevent); - iop_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&iop_clockevent); - - /* - * Set up free-running clocksource timer 1. - */ - write_trr1(0xffffffff); - write_tcr1(0xffffffff); - write_tmr1(timer_ctl); - clocksource_register_hz(&iop_clocksource, tick_rate); -} |