diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/mm/proc-sa110.S')
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/mm/proc-sa110.S | 227 |
1 files changed, 0 insertions, 227 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-sa110.S b/ANDROID_3.4.5/arch/arm/mm/proc-sa110.S deleted file mode 100644 index 775d70fb..00000000 --- a/ANDROID_3.4.5/arch/arm/mm/proc-sa110.S +++ /dev/null @@ -1,227 +0,0 @@ -/* - * linux/arch/arm/mm/proc-sa110.S - * - * Copyright (C) 1997-2002 Russell King - * hacked for non-paged-MM by Hyok S. Choi, 2003. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * MMU functions for SA110 - * - * These are the low level assembler for performing cache and TLB - * functions on the StrongARM-110. - */ -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/assembler.h> -#include <asm/asm-offsets.h> -#include <asm/hwcap.h> -#include <mach/hardware.h> -#include <asm/pgtable-hwdef.h> -#include <asm/pgtable.h> -#include <asm/ptrace.h> - -#include "proc-macros.S" - -/* - * the cache line size of the I and D cache - */ -#define DCACHELINESIZE 32 - - .text - -/* - * cpu_sa110_proc_init() - */ -ENTRY(cpu_sa110_proc_init) - mov r0, #0 - mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching - mov pc, lr - -/* - * cpu_sa110_proc_fin() - */ -ENTRY(cpu_sa110_proc_fin) - mov r0, #0 - mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching - mrc p15, 0, r0, c1, c0, 0 @ ctrl register - bic r0, r0, #0x1000 @ ...i............ - bic r0, r0, #0x000e @ ............wca. - mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr - -/* - * cpu_sa110_reset(loc) - * - * Perform a soft reset of the system. Put the CPU into the - * same state as it would be if it had been reset, and branch - * to what would be the reset vector. - * - * loc: location to jump to for soft reset - */ - .align 5 - .pushsection .idmap.text, "ax" -ENTRY(cpu_sa110_reset) - mov ip, #0 - mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches - mcr p15, 0, ip, c7, c10, 4 @ drain WB -#ifdef CONFIG_MMU - mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs -#endif - mrc p15, 0, ip, c1, c0, 0 @ ctrl register - bic ip, ip, #0x000f @ ............wcam - bic ip, ip, #0x1100 @ ...i...s........ - mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 -ENDPROC(cpu_sa110_reset) - .popsection - -/* - * cpu_sa110_do_idle(type) - * - * Cause the processor to idle - * - * type: call type: - * 0 = slow idle - * 1 = fast idle - * 2 = switch to slow processor clock - * 3 = switch to fast processor clock - */ - .align 5 - -ENTRY(cpu_sa110_do_idle) - mcr p15, 0, ip, c15, c2, 2 @ disable clock switching - ldr r1, =UNCACHEABLE_ADDR @ load from uncacheable loc - ldr r1, [r1, #0] @ force switch to MCLK - mov r0, r0 @ safety - mov r0, r0 @ safety - mov r0, r0 @ safety - mcr p15, 0, r0, c15, c8, 2 @ Wait for interrupt, cache aligned - mov r0, r0 @ safety - mov r0, r0 @ safety - mov r0, r0 @ safety - mcr p15, 0, r0, c15, c1, 2 @ enable clock switching - mov pc, lr - -/* ================================= CACHE ================================ */ - -/* - * cpu_sa110_dcache_clean_area(addr,sz) - * - * Clean the specified entry of any caches such that the MMU - * translation fetches will obtain correct data. - * - * addr: cache-unaligned virtual address - */ - .align 5 -ENTRY(cpu_sa110_dcache_clean_area) -1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry - add r0, r0, #DCACHELINESIZE - subs r1, r1, #DCACHELINESIZE - bhi 1b - mov pc, lr - -/* =============================== PageTable ============================== */ - -/* - * cpu_sa110_switch_mm(pgd) - * - * Set the translation base pointer to be as described by pgd. - * - * pgd: new page tables - */ - .align 5 -ENTRY(cpu_sa110_switch_mm) -#ifdef CONFIG_MMU - str lr, [sp, #-4]! - bl v4wb_flush_kern_cache_all @ clears IP - mcr p15, 0, r0, c2, c0, 0 @ load page table pointer - mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs - ldr pc, [sp], #4 -#else - mov pc, lr -#endif - -/* - * cpu_sa110_set_pte_ext(ptep, pte, ext) - * - * Set a PTE and flush it out - */ - .align 5 -ENTRY(cpu_sa110_set_pte_ext) -#ifdef CONFIG_MMU - armv3_set_pte_ext wc_disable=0 - mov r0, r0 - mcr p15, 0, r0, c7, c10, 1 @ clean D entry - mcr p15, 0, r0, c7, c10, 4 @ drain WB -#endif - mov pc, lr - - __CPUINIT - - .type __sa110_setup, #function -__sa110_setup: - mov r10, #0 - mcr p15, 0, r10, c7, c7 @ invalidate I,D caches on v4 - mcr p15, 0, r10, c7, c10, 4 @ drain write buffer on v4 -#ifdef CONFIG_MMU - mcr p15, 0, r10, c8, c7 @ invalidate I,D TLBs on v4 -#endif - - adr r5, sa110_crval - ldmia r5, {r5, r6} - mrc p15, 0, r0, c1, c0 @ get control register v4 - bic r0, r0, r5 - orr r0, r0, r6 - mov pc, lr - .size __sa110_setup, . - __sa110_setup - - /* - * R - * .RVI ZFRS BLDP WCAM - * ..01 0001 ..11 1101 - * - */ - .type sa110_crval, #object -sa110_crval: - crval clear=0x00003f3f, mmuset=0x0000113d, ucset=0x00001130 - - __INITDATA - - @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) - define_processor_functions sa110, dabort=v4_early_abort, pabort=legacy_pabort - - .section ".rodata" - - string cpu_arch_name, "armv4" - string cpu_elf_name, "v4" - string cpu_sa110_name, "StrongARM-110" - - .align - - .section ".proc.info.init", #alloc, #execinstr - - .type __sa110_proc_info,#object -__sa110_proc_info: - .long 0x4401a100 - .long 0xfffffff0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __sa110_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT - .long cpu_sa110_name - .long sa110_processor_functions - .long v4wb_tlb_fns - .long v4wb_user_fns - .long v4wb_cache_fns - .size __sa110_proc_info, . - __sa110_proc_info |