diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/mm/proc-arm1020.S')
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/mm/proc-arm1020.S | 529 |
1 files changed, 0 insertions, 529 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm1020.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm1020.S deleted file mode 100644 index 23495134..00000000 --- a/ANDROID_3.4.5/arch/arm/mm/proc-arm1020.S +++ /dev/null @@ -1,529 +0,0 @@ -/* - * linux/arch/arm/mm/proc-arm1020.S: MMU functions for ARM1020 - * - * Copyright (C) 2000 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * hacked for non-paged-MM by Hyok S. Choi, 2003. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * These are the low level assembler for performing cache and TLB - * functions on the arm1020. - * - * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt - */ -#include <linux/linkage.h> -#include <linux/init.h> -#include <asm/assembler.h> -#include <asm/asm-offsets.h> -#include <asm/hwcap.h> -#include <asm/pgtable-hwdef.h> -#include <asm/pgtable.h> -#include <asm/ptrace.h> - -#include "proc-macros.S" - -/* - * This is the maximum size of an area which will be invalidated - * using the single invalidate entry instructions. Anything larger - * than this, and we go for the whole cache. - * - * This value should be chosen such that we choose the cheapest - * alternative. - */ -#define MAX_AREA_SIZE 32768 - -/* - * The size of one data cache line. - */ -#define CACHE_DLINESIZE 32 - -/* - * The number of data cache segments. - */ -#define CACHE_DSEGMENTS 16 - -/* - * The number of lines in a cache segment. - */ -#define CACHE_DENTRIES 64 - -/* - * This is the size at which it becomes more efficient to - * clean the whole cache, rather than using the individual - * cache line maintenance instructions. - */ -#define CACHE_DLIMIT 32768 - - .text -/* - * cpu_arm1020_proc_init() - */ -ENTRY(cpu_arm1020_proc_init) - mov pc, lr - -/* - * cpu_arm1020_proc_fin() - */ -ENTRY(cpu_arm1020_proc_fin) - mrc p15, 0, r0, c1, c0, 0 @ ctrl register - bic r0, r0, #0x1000 @ ...i............ - bic r0, r0, #0x000e @ ............wca. - mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr - -/* - * cpu_arm1020_reset(loc) - * - * Perform a soft reset of the system. Put the CPU into the - * same state as it would be if it had been reset, and branch - * to what would be the reset vector. - * - * loc: location to jump to for soft reset - */ - .align 5 - .pushsection .idmap.text, "ax" -ENTRY(cpu_arm1020_reset) - mov ip, #0 - mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches - mcr p15, 0, ip, c7, c10, 4 @ drain WB -#ifdef CONFIG_MMU - mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs -#endif - mrc p15, 0, ip, c1, c0, 0 @ ctrl register - bic ip, ip, #0x000f @ ............wcam - bic ip, ip, #0x1100 @ ...i...s........ - mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 -ENDPROC(cpu_arm1020_reset) - .popsection - -/* - * cpu_arm1020_do_idle() - */ - .align 5 -ENTRY(cpu_arm1020_do_idle) - mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr - -/* ================================= CACHE ================================ */ - - .align 5 - -/* - * flush_icache_all() - * - * Unconditionally clean and invalidate the entire icache. - */ -ENTRY(arm1020_flush_icache_all) -#ifndef CONFIG_CPU_ICACHE_DISABLE - mov r0, #0 - mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache -#endif - mov pc, lr -ENDPROC(arm1020_flush_icache_all) - -/* - * flush_user_cache_all() - * - * Invalidate all cache entries in a particular address - * space. - */ -ENTRY(arm1020_flush_user_cache_all) - /* FALLTHROUGH */ -/* - * flush_kern_cache_all() - * - * Clean and invalidate the entire cache. - */ -ENTRY(arm1020_flush_kern_cache_all) - mov r2, #VM_EXEC - mov ip, #0 -__flush_whole_cache: -#ifndef CONFIG_CPU_DCACHE_DISABLE - mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments -1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries -2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index - mcr p15, 0, ip, c7, c10, 4 @ drain WB - subs r3, r3, #1 << 26 - bcs 2b @ entries 63 to 0 - subs r1, r1, #1 << 5 - bcs 1b @ segments 15 to 0 -#endif - tst r2, #VM_EXEC -#ifndef CONFIG_CPU_ICACHE_DISABLE - mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache -#endif - mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr - -/* - * flush_user_cache_range(start, end, flags) - * - * Invalidate a range of cache entries in the specified - * address space. - * - * - start - start address (inclusive) - * - end - end address (exclusive) - * - flags - vm_flags for this space - */ -ENTRY(arm1020_flush_user_cache_range) - mov ip, #0 - sub r3, r1, r0 @ calculate total size - cmp r3, #CACHE_DLIMIT - bhs __flush_whole_cache - -#ifndef CONFIG_CPU_DCACHE_DISABLE - mcr p15, 0, ip, c7, c10, 4 -1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry - mcr p15, 0, ip, c7, c10, 4 @ drain WB - add r0, r0, #CACHE_DLINESIZE - cmp r0, r1 - blo 1b -#endif - tst r2, #VM_EXEC -#ifndef CONFIG_CPU_ICACHE_DISABLE - mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache -#endif - mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr - -/* - * coherent_kern_range(start, end) - * - * Ensure coherency between the Icache and the Dcache in the - * region described by start. If you have non-snooping - * Harvard caches, you need to implement this function. - * - * - start - virtual start address - * - end - virtual end address - */ -ENTRY(arm1020_coherent_kern_range) - /* FALLTRHOUGH */ - -/* - * coherent_user_range(start, end) - * - * Ensure coherency between the Icache and the Dcache in the - * region described by start. If you have non-snooping - * Harvard caches, you need to implement this function. - * - * - start - virtual start address - * - end - virtual end address - */ -ENTRY(arm1020_coherent_user_range) - mov ip, #0 - bic r0, r0, #CACHE_DLINESIZE - 1 - mcr p15, 0, ip, c7, c10, 4 -1: -#ifndef CONFIG_CPU_DCACHE_DISABLE - mcr p15, 0, r0, c7, c10, 1 @ clean D entry - mcr p15, 0, ip, c7, c10, 4 @ drain WB -#endif -#ifndef CONFIG_CPU_ICACHE_DISABLE - mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry -#endif - add r0, r0, #CACHE_DLINESIZE - cmp r0, r1 - blo 1b - mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr - -/* - * flush_kern_dcache_area(void *addr, size_t size) - * - * Ensure no D cache aliasing occurs, either with itself or - * the I cache - * - * - addr - kernel address - * - size - region size - */ -ENTRY(arm1020_flush_kern_dcache_area) - mov ip, #0 -#ifndef CONFIG_CPU_DCACHE_DISABLE - add r1, r0, r1 -1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry - mcr p15, 0, ip, c7, c10, 4 @ drain WB - add r0, r0, #CACHE_DLINESIZE - cmp r0, r1 - blo 1b -#endif - mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr - -/* - * dma_inv_range(start, end) - * - * Invalidate (discard) the specified virtual address range. - * May not write back any entries. If 'start' or 'end' - * are not cache line aligned, those lines must be written - * back. - * - * - start - virtual start address - * - end - virtual end address - * - * (same as v4wb) - */ -arm1020_dma_inv_range: - mov ip, #0 -#ifndef CONFIG_CPU_DCACHE_DISABLE - tst r0, #CACHE_DLINESIZE - 1 - bic r0, r0, #CACHE_DLINESIZE - 1 - mcrne p15, 0, ip, c7, c10, 4 - mcrne p15, 0, r0, c7, c10, 1 @ clean D entry - mcrne p15, 0, ip, c7, c10, 4 @ drain WB - tst r1, #CACHE_DLINESIZE - 1 - mcrne p15, 0, ip, c7, c10, 4 - mcrne p15, 0, r1, c7, c10, 1 @ clean D entry - mcrne p15, 0, ip, c7, c10, 4 @ drain WB -1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry - add r0, r0, #CACHE_DLINESIZE - cmp r0, r1 - blo 1b -#endif - mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr - -/* - * dma_clean_range(start, end) - * - * Clean the specified virtual address range. - * - * - start - virtual start address - * - end - virtual end address - * - * (same as v4wb) - */ -arm1020_dma_clean_range: - mov ip, #0 -#ifndef CONFIG_CPU_DCACHE_DISABLE - bic r0, r0, #CACHE_DLINESIZE - 1 -1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry - mcr p15, 0, ip, c7, c10, 4 @ drain WB - add r0, r0, #CACHE_DLINESIZE - cmp r0, r1 - blo 1b -#endif - mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr - -/* - * dma_flush_range(start, end) - * - * Clean and invalidate the specified virtual address range. - * - * - start - virtual start address - * - end - virtual end address - */ -ENTRY(arm1020_dma_flush_range) - mov ip, #0 -#ifndef CONFIG_CPU_DCACHE_DISABLE - bic r0, r0, #CACHE_DLINESIZE - 1 - mcr p15, 0, ip, c7, c10, 4 -1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry - mcr p15, 0, ip, c7, c10, 4 @ drain WB - add r0, r0, #CACHE_DLINESIZE - cmp r0, r1 - blo 1b -#endif - mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr - -/* - * dma_map_area(start, size, dir) - * - start - kernel virtual start address - * - size - size of region - * - dir - DMA direction - */ -ENTRY(arm1020_dma_map_area) - add r1, r1, r0 - cmp r2, #DMA_TO_DEVICE - beq arm1020_dma_clean_range - bcs arm1020_dma_inv_range - b arm1020_dma_flush_range -ENDPROC(arm1020_dma_map_area) - -/* - * dma_unmap_area(start, size, dir) - * - start - kernel virtual start address - * - size - size of region - * - dir - DMA direction - */ -ENTRY(arm1020_dma_unmap_area) - mov pc, lr -ENDPROC(arm1020_dma_unmap_area) - - @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) - define_cache_functions arm1020 - - .align 5 -ENTRY(cpu_arm1020_dcache_clean_area) -#ifndef CONFIG_CPU_DCACHE_DISABLE - mov ip, #0 -1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry - mcr p15, 0, ip, c7, c10, 4 @ drain WB - add r0, r0, #CACHE_DLINESIZE - subs r1, r1, #CACHE_DLINESIZE - bhi 1b -#endif - mov pc, lr - -/* =============================== PageTable ============================== */ - -/* - * cpu_arm1020_switch_mm(pgd) - * - * Set the translation base pointer to be as described by pgd. - * - * pgd: new page tables - */ - .align 5 -ENTRY(cpu_arm1020_switch_mm) -#ifdef CONFIG_MMU -#ifndef CONFIG_CPU_DCACHE_DISABLE - mcr p15, 0, r3, c7, c10, 4 - mov r1, #0xF @ 16 segments -1: mov r3, #0x3F @ 64 entries -2: mov ip, r3, LSL #26 @ shift up entry - orr ip, ip, r1, LSL #5 @ shift in/up index - mcr p15, 0, ip, c7, c14, 2 @ Clean & Inval DCache entry - mov ip, #0 - mcr p15, 0, ip, c7, c10, 4 - subs r3, r3, #1 - cmp r3, #0 - bge 2b @ entries 3F to 0 - subs r1, r1, #1 - cmp r1, #0 - bge 1b @ segments 15 to 0 - -#endif - mov r1, #0 -#ifndef CONFIG_CPU_ICACHE_DISABLE - mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache -#endif - mcr p15, 0, r1, c7, c10, 4 @ drain WB - mcr p15, 0, r0, c2, c0, 0 @ load page table pointer - mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs -#endif /* CONFIG_MMU */ - mov pc, lr - -/* - * cpu_arm1020_set_pte(ptep, pte) - * - * Set a PTE and flush it out - */ - .align 5 -ENTRY(cpu_arm1020_set_pte_ext) -#ifdef CONFIG_MMU - armv3_set_pte_ext - mov r0, r0 -#ifndef CONFIG_CPU_DCACHE_DISABLE - mcr p15, 0, r0, c7, c10, 4 - mcr p15, 0, r0, c7, c10, 1 @ clean D entry -#endif - mcr p15, 0, r0, c7, c10, 4 @ drain WB -#endif /* CONFIG_MMU */ - mov pc, lr - - __CPUINIT - - .type __arm1020_setup, #function -__arm1020_setup: - mov r0, #0 - mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 -#ifdef CONFIG_MMU - mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 -#endif - - adr r5, arm1020_crval - ldmia r5, {r5, r6} - mrc p15, 0, r0, c1, c0 @ get control register v4 - bic r0, r0, r5 - orr r0, r0, r6 -#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN - orr r0, r0, #0x4000 @ .R.. .... .... .... -#endif - mov pc, lr - .size __arm1020_setup, . - __arm1020_setup - - /* - * R - * .RVI ZFRS BLDP WCAM - * .011 1001 ..11 0101 - */ - .type arm1020_crval, #object -arm1020_crval: - crval clear=0x0000593f, mmuset=0x00003935, ucset=0x00001930 - - __INITDATA - @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) - define_processor_functions arm1020, dabort=v4t_early_abort, pabort=legacy_pabort - - - .section ".rodata" - - string cpu_arch_name, "armv5t" - string cpu_elf_name, "v5" - - .type cpu_arm1020_name, #object -cpu_arm1020_name: - .ascii "ARM1020" -#ifndef CONFIG_CPU_ICACHE_DISABLE - .ascii "i" -#endif -#ifndef CONFIG_CPU_DCACHE_DISABLE - .ascii "d" -#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH - .ascii "(wt)" -#else - .ascii "(wb)" -#endif -#endif -#ifndef CONFIG_CPU_BPREDICT_DISABLE - .ascii "B" -#endif -#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN - .ascii "RR" -#endif - .ascii "\0" - .size cpu_arm1020_name, . - cpu_arm1020_name - - .align - - .section ".proc.info.init", #alloc, #execinstr - - .type __arm1020_proc_info,#object -__arm1020_proc_info: - .long 0x4104a200 @ ARM 1020T (Architecture v5T) - .long 0xff0ffff0 - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __arm1020_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB - .long cpu_arm1020_name - .long arm1020_processor_functions - .long v4wbi_tlb_fns - .long v4wb_user_fns - .long arm1020_cache_fns - .size __arm1020_proc_info, . - __arm1020_proc_info |