diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/mach-s3c64xx/Kconfig')
-rw-r--r-- | ANDROID_3.4.5/arch/arm/mach-s3c64xx/Kconfig | 309 |
1 files changed, 0 insertions, 309 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/Kconfig deleted file mode 100644 index 82c09157..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/Kconfig +++ /dev/null @@ -1,309 +0,0 @@ -# Copyright 2008 Openmoko, Inc. -# Simtec Electronics, Ben Dooks <ben@simtec.co.uk> -# -# Licensed under GPLv2 - -# temporary until we can eliminate all drivers using it. -config PLAT_S3C64XX - bool - depends on ARCH_S3C64XX - select SAMSUNG_WAKEMASK - select PM_GENERIC_DOMAINS - default y - help - Base platform code for any Samsung S3C64XX device - - -# Configuration options for the S3C6410 CPU - -config CPU_S3C6400 - bool - help - Enable S3C6400 CPU support - -config CPU_S3C6410 - bool - help - Enable S3C6410 CPU support - -config S3C64XX_DMA - bool "S3C64XX DMA" - select S3C_DMA - -config S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_SDHCI_GPIO - bool - help - Internal configuration for default SDHCI setup for S3C6400 and - S3C6410 SoCs. - -config S3C64XX_DEV_ONENAND1 - bool - help - Compile in platform device definition for OneNAND1 controller - -# platform specific device setup - -config S3C64XX_SETUP_I2C0 - bool - default y - help - Common setup code for i2c bus 0. - - Note, currently since i2c0 is always compiled, this setup helper - is always compiled with it. - -config S3C64XX_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config S3C64XX_SETUP_IDE - bool - help - Common setup code for S3C64XX IDE. - -config S3C64XX_SETUP_FB_24BPP - bool - help - Common setup code for S3C64XX with an 24bpp RGB display helper. - -config S3C64XX_SETUP_KEYPAD - bool - help - Common setup code for S3C64XX KEYPAD GPIO configurations - -config S3C64XX_SETUP_SDHCI_GPIO - bool - help - Common setup code for S3C64XX SDHCI GPIO configurations - -config S3C64XX_SETUP_SPI - bool - help - Common setup code for SPI GPIO configurations - -config S3C64XX_SETUP_USB_PHY - bool - help - Common setup code for USB PHY controller - -# S36400 Macchine support - -config MACH_SMDK6400 - bool "SMDK6400" - select CPU_S3C6400 - select S3C_DEV_HSMMC - select S3C_DEV_NAND - select S3C64XX_SETUP_SDHCI - help - Machine support for the Samsung SMDK6400 - -# S3C6410 machine support - -config MACH_ANW6410 - bool "A&W6410" - select CPU_S3C6410 - select S3C_DEV_FB - select S3C64XX_SETUP_FB_24BPP - help - Machine support for the A&W6410 - -config MACH_MINI6410 - bool "MINI6410" - select CPU_S3C6410 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C64XX_SETUP_SDHCI - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - select S3C_DEV_FB - select S3C64XX_SETUP_FB_24BPP - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - help - Machine support for the FriendlyARM MINI6410 - -config MACH_REAL6410 - bool "REAL6410" - select CPU_S3C6410 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C64XX_SETUP_SDHCI - select S3C_DEV_FB - select S3C64XX_SETUP_FB_24BPP - select S3C_DEV_NAND - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - select S3C_DEV_USB_HOST - help - Machine support for the CoreWind REAL6410 - -config MACH_SMDK6410 - bool "SMDK6410" - select CPU_S3C6410 - select SAMSUNG_DEV_ADC - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_I2C1 - select SAMSUNG_DEV_IDE - select S3C_DEV_FB - select S3C_DEV_RTC - select SAMSUNG_DEV_TS - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_I2C1 - select S3C64XX_SETUP_IDE - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_KEYPAD - select S3C64XX_SETUP_USB_PHY - help - Machine support for the Samsung SMDK6410 - -# At least some of the SMDK6410s were shipped with the card detect -# for the MMC/SD slots connected to the same input. This means that -# either the boards need to be altered to have channel0 to an alternate -# configuration or that only one slot can be used. - -choice - prompt "SMDK6410 MMC/SD slot setup" - depends on MACH_SMDK6410 - -config SMDK6410_SD_CH0 - bool "Use channel 0 only" - depends on MACH_SMDK6410 - help - Select CON7 (channel 0) as the MMC/SD slot, as - at least some SMDK6410 boards come with the - resistors fitted so that the card detects for - channels 0 and 1 are the same. - -config SMDK6410_SD_CH1 - bool "Use channel 1 only" - depends on MACH_SMDK6410 - help - Select CON6 (channel 1) as the MMC/SD slot, as - at least some SMDK6410 boards come with the - resistors fitted so that the card detects for - channels 0 and 1 are the same. - -endchoice - -config SMDK6410_WM1190_EV1 - bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" - depends on MACH_SMDK6410 - select REGULATOR - select REGULATOR_WM8350 - select SAMSUNG_GPIO_EXTRA64 - select MFD_WM8350_I2C - select MFD_WM8350_CONFIG_MODE_0 - select MFD_WM8350_CONFIG_MODE_3 - select MFD_WM8352_CONFIG_MODE_0 - help - The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC - and audio daughtercard for the Samsung SMDK6410 reference - platform. Enabling this option will build support for this - module into the kernel. The presence of the module will be - detected at runtime so the the resulting kernel can be used - with or without the 1190-EV1 fitted. - -config SMDK6410_WM1192_EV1 - bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" - depends on MACH_SMDK6410 - select REGULATOR - select REGULATOR_WM831X - select SAMSUNG_GPIO_EXTRA64 - select MFD_WM831X - select MFD_WM831X_I2C - help - The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC - daughtercard for the Samsung SMDK6410 reference platform. - Enabling this option will build support for this module into - the kernel. The presence of the daughtercard will be - detected at runtime so the the resulting kernel can be used - with or without the 1192-EV1 fitted. - -config MACH_NCP - bool "NCP" - select CPU_S3C6410 - select S3C_DEV_I2C1 - select S3C_DEV_HSMMC1 - select S3C64XX_SETUP_I2C1 - help - Machine support for the Samsung NCP - -config MACH_HMT - bool "Airgoo HMT" - select CPU_S3C6410 - select S3C_DEV_FB - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select S3C64XX_SETUP_FB_24BPP - select SAMSUNG_DEV_PWM - help - Machine support for the Airgoo HMT - -config MACH_SMARTQ - bool - select CPU_S3C6410 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_FB - select S3C_DEV_HWMON - select S3C_DEV_RTC - select S3C_DEV_USB_HSOTG - select S3C_DEV_USB_HOST - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_USB_PHY - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Shared machine support for SmartQ 5/7 - -config MACH_SMARTQ5 - bool "SmartQ 5" - select MACH_SMARTQ - help - Machine support for the SmartQ 5 - -config MACH_SMARTQ7 - bool "SmartQ 7" - select MACH_SMARTQ - help - Machine support for the SmartQ 7 - -config MACH_WLF_CRAGG_6410 - bool "Wolfson Cragganmore 6410" - select CPU_S3C6410 - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_I2C1 - select S3C64XX_SETUP_IDE - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_KEYPAD - select S3C64XX_SETUP_SPI - select S3C64XX_SETUP_USB_PHY - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_KEYPAD - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_I2C1 - select S3C_DEV_WDT - select S3C_DEV_RTC - select S3C64XX_DEV_SPI0 - select SAMSUNG_GPIO_EXTRA128 - select I2C - select LEDS_GPIO_REGISTER - help - Machine support for the Wolfson Cragganmore S3C6410 variant. |