diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-smc91x.c')
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-smc91x.c | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-smc91x.c b/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-smc91x.c deleted file mode 100644 index ba10c24f..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-smc91x.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/gpmc-smc91x.c - * - * Copyright (C) 2009 Nokia Corporation - * Contact: Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/smc91x.h> - -#include <plat/board.h> -#include <plat/gpmc.h> -#include <plat/gpmc-smc91x.h> - -static struct omap_smc91x_platform_data *gpmc_cfg; - -static struct resource gpmc_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ, - }, -}; - -static struct smc91x_platdata gpmc_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct platform_device gpmc_smc91x_device = { - .name = "smc91x", - .id = -1, - .dev = { - .platform_data = &gpmc_smc91x_info, - }, - .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), - .resource = gpmc_smc91x_resources, -}; - -/* - * Set the gpmc timings for smc91c96. The timings are taken - * from the data sheet available at: - * http://www.smsc.com/main/catalog/lan91c96.html - * REVISIT: Level shifters can add at least to the access latency. - */ -static int smc91c96_gpmc_retime(void) -{ - struct gpmc_timings t; - const int t3 = 10; /* Figure 12.2 read and 12.4 write */ - const int t4_r = 20; /* Figure 12.2 read */ - const int t4_w = 5; /* Figure 12.4 write */ - const int t5 = 25; /* Figure 12.2 read */ - const int t6 = 15; /* Figure 12.2 read */ - const int t7 = 5; /* Figure 12.4 write */ - const int t8 = 5; /* Figure 12.4 write */ - const int t20 = 185; /* Figure 12.2 read and 12.4 write */ - u32 l; - - memset(&t, 0, sizeof(t)); - - /* Read timings */ - t.cs_on = 0; - t.adv_on = t.cs_on; - t.oe_on = t.adv_on + t3; - t.access = t.oe_on + t5; - t.oe_off = t.access; - t.adv_rd_off = t.oe_off + max(t4_r, t6); - t.cs_rd_off = t.oe_off; - t.rd_cycle = t20 - t.oe_on; - - /* Write timings */ - t.we_on = t.adv_on + t3; - - if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) { - t.wr_data_mux_bus = t.we_on; - t.we_off = t.wr_data_mux_bus + t7; - } else - t.we_off = t.we_on + t7; - if (cpu_is_omap34xx()) - t.wr_access = t.we_off; - t.adv_wr_off = t.we_off + max(t4_w, t8); - t.cs_wr_off = t.we_off + t4_w; - t.wr_cycle = t20 - t.we_on; - - l = GPMC_CONFIG1_DEVICESIZE_16; - if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) - l |= GPMC_CONFIG1_MUXADDDATA; - if (gpmc_cfg->flags & GPMC_READ_MON) - l |= GPMC_CONFIG1_WAIT_READ_MON; - if (gpmc_cfg->flags & GPMC_WRITE_MON) - l |= GPMC_CONFIG1_WAIT_WRITE_MON; - if (gpmc_cfg->wait_pin) - l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin); - gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l); - - /* - * FIXME: Calculate the address and data bus muxed timings. - * Note that at least adv_rd_off needs to be changed according - * to omap3430 TRM Figure 11-11. Are the sdp boards using the - * FPGA in between smc91x and omap as the timings are different - * from above? - */ - if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) - return 0; - - return gpmc_cs_set_timings(gpmc_cfg->cs, &t); -} - -/* - * Initialize smc91x device connected to the GPMC. Note that we - * assume that pin multiplexing is done in the board-*.c file, - * or in the bootloader. - */ -void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) -{ - unsigned long cs_mem_base; - int ret; - - gpmc_cfg = board_data; - - if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96) - gpmc_cfg->retime = smc91c96_gpmc_retime; - - if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; - } - - gpmc_smc91x_resources[0].start = cs_mem_base + 0x300; - gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f; - gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK); - - if (gpmc_cfg->retime) { - ret = gpmc_cfg->retime(); - if (ret != 0) - goto free1; - } - - if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0) - goto free1; - - gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); - - if (gpmc_cfg->gpio_pwrdwn) { - ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn, - GPIOF_OUT_INIT_LOW, "SMC91X powerdown"); - if (ret) - goto free2; - } - - if (gpmc_cfg->gpio_reset) { - ret = gpio_request_one(gpmc_cfg->gpio_reset, - GPIOF_OUT_INIT_LOW, "SMC91X reset"); - if (ret) - goto free3; - - gpio_set_value(gpmc_cfg->gpio_reset, 1); - msleep(100); - gpio_set_value(gpmc_cfg->gpio_reset, 0); - } - - if (platform_device_register(&gpmc_smc91x_device) < 0) { - printk(KERN_ERR "Unable to register smc91x device\n"); - gpio_free(gpmc_cfg->gpio_reset); - goto free3; - } - - return; - -free3: - if (gpmc_cfg->gpio_pwrdwn) - gpio_free(gpmc_cfg->gpio_pwrdwn); -free2: - gpio_free(gpmc_cfg->gpio_irq); -free1: - gpmc_cs_free(gpmc_cfg->cs); - - printk(KERN_ERR "Could not initialize smc91x\n"); -} |