diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51-peripherals.c')
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51-peripherals.c | 1154 |
1 files changed, 0 insertions, 1154 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51-peripherals.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51-peripherals.c deleted file mode 100644 index d87ee061..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51-peripherals.c +++ /dev/null @@ -1,1154 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-rx51-peripherals.c - * - * Copyright (C) 2008-2009 Nokia - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/wl12xx.h> -#include <linux/spi/tsc2005.h> -#include <linux/i2c.h> -#include <linux/i2c/twl.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/regulator/machine.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/mmc/host.h> -#include <linux/power/isp1704_charger.h> -#include <asm/system_info.h> - -#include <plat/mcspi.h> -#include <plat/board.h> -#include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> -#include <plat/onenand.h> -#include <plat/gpmc-smc91x.h> - -#include <mach/board-rx51.h> - -#include <sound/tlv320aic3x.h> -#include <sound/tpa6130a2-plat.h> -#include <media/radio-si4713.h> -#include <media/si4713.h> -#include <linux/leds-lp5523.h> - -#include <../drivers/staging/iio/light/tsl2563.h> - -#include "mux.h" -#include "hsmmc.h" -#include "common-board-devices.h" - -#define SYSTEM_REV_B_USES_VAUX3 0x1699 -#define SYSTEM_REV_S_USES_VAUX3 0x8 - -#define RX51_WL1251_POWER_GPIO 87 -#define RX51_WL1251_IRQ_GPIO 42 -#define RX51_FMTX_RESET_GPIO 163 -#define RX51_FMTX_IRQ 53 -#define RX51_LP5523_CHIP_EN_GPIO 41 - -#define RX51_USB_TRANSCEIVER_RST_GPIO 67 - -#define RX51_TSC2005_RESET_GPIO 104 -#define RX51_TSC2005_IRQ_GPIO 100 - -/* list all spi devices here */ -enum { - RX51_SPI_WL1251, - RX51_SPI_MIPID, /* LCD panel */ - RX51_SPI_TSC2005, /* Touch Controller */ -}; - -static struct wl12xx_platform_data wl1251_pdata; -static struct tsc2005_platform_data tsc2005_pdata; - -#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) -static struct tsl2563_platform_data rx51_tsl2563_platform_data = { - .cover_comp_gain = 16, -}; -#endif - -#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) -static struct lp5523_led_config rx51_lp5523_led_config[] = { - { - .chan_nr = 0, - .led_current = 50, - }, { - .chan_nr = 1, - .led_current = 50, - }, { - .chan_nr = 2, - .led_current = 50, - }, { - .chan_nr = 3, - .led_current = 50, - }, { - .chan_nr = 4, - .led_current = 50, - }, { - .chan_nr = 5, - .led_current = 50, - }, { - .chan_nr = 6, - .led_current = 50, - }, { - .chan_nr = 7, - .led_current = 50, - }, { - .chan_nr = 8, - .led_current = 50, - } -}; - -static int rx51_lp5523_setup(void) -{ - return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT, - "lp5523_enable"); -} - -static void rx51_lp5523_release(void) -{ - gpio_free(RX51_LP5523_CHIP_EN_GPIO); -} - -static void rx51_lp5523_enable(bool state) -{ - gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); -} - -static struct lp5523_platform_data rx51_lp5523_platform_data = { - .led_config = rx51_lp5523_led_config, - .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), - .clock_mode = LP5523_CLOCK_AUTO, - .setup_resources = rx51_lp5523_setup, - .release_resources = rx51_lp5523_release, - .enable = rx51_lp5523_enable, -}; -#endif - -static struct omap2_mcspi_device_config wl1251_mcspi_config = { - .turbo_mode = 0, -}; - -static struct omap2_mcspi_device_config mipid_mcspi_config = { - .turbo_mode = 0, -}; - -static struct omap2_mcspi_device_config tsc2005_mcspi_config = { - .turbo_mode = 0, -}; - -static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { - [RX51_SPI_WL1251] = { - .modalias = "wl1251", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 48000000, - .mode = SPI_MODE_3, - .controller_data = &wl1251_mcspi_config, - .platform_data = &wl1251_pdata, - }, - [RX51_SPI_MIPID] = { - .modalias = "acx565akm", - .bus_num = 1, - .chip_select = 2, - .max_speed_hz = 6000000, - .controller_data = &mipid_mcspi_config, - }, - [RX51_SPI_TSC2005] = { - .modalias = "tsc2005", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 6000000, - .controller_data = &tsc2005_mcspi_config, - .platform_data = &tsc2005_pdata, - }, -}; - -static void rx51_charger_set_power(bool on) -{ - gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); -} - -static struct isp1704_charger_data rx51_charger_data = { - .set_power = rx51_charger_set_power, -}; - -static struct platform_device rx51_charger_device = { - .name = "isp1704_charger", - .dev = { - .platform_data = &rx51_charger_data, - }, -}; - -static void __init rx51_charger_init(void) -{ - WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, - GPIOF_OUT_INIT_HIGH, "isp1704_reset")); - - platform_device_register(&rx51_charger_device); -} - -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) - -#define RX51_GPIO_CAMERA_LENS_COVER 110 -#define RX51_GPIO_CAMERA_FOCUS 68 -#define RX51_GPIO_CAMERA_CAPTURE 69 -#define RX51_GPIO_KEYPAD_SLIDE 71 -#define RX51_GPIO_LOCK_BUTTON 113 -#define RX51_GPIO_PROXIMITY 89 - -#define RX51_GPIO_DEBOUNCE_TIMEOUT 10 - -static struct gpio_keys_button rx51_gpio_keys[] = { - { - .desc = "Camera Lens Cover", - .type = EV_SW, - .code = SW_CAMERA_LENS_COVER, - .gpio = RX51_GPIO_CAMERA_LENS_COVER, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Camera Focus", - .type = EV_KEY, - .code = KEY_CAMERA_FOCUS, - .gpio = RX51_GPIO_CAMERA_FOCUS, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Camera Capture", - .type = EV_KEY, - .code = KEY_CAMERA, - .gpio = RX51_GPIO_CAMERA_CAPTURE, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Lock Button", - .type = EV_KEY, - .code = KEY_SCREENLOCK, - .gpio = RX51_GPIO_LOCK_BUTTON, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Keypad Slide", - .type = EV_SW, - .code = SW_KEYPAD_SLIDE, - .gpio = RX51_GPIO_KEYPAD_SLIDE, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Proximity Sensor", - .type = EV_SW, - .code = SW_FRONT_PROXIMITY, - .gpio = RX51_GPIO_PROXIMITY, - .active_low = 0, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - } -}; - -static struct gpio_keys_platform_data rx51_gpio_keys_data = { - .buttons = rx51_gpio_keys, - .nbuttons = ARRAY_SIZE(rx51_gpio_keys), -}; - -static struct platform_device rx51_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &rx51_gpio_keys_data, - }, -}; - -static void __init rx51_add_gpio_keys(void) -{ - platform_device_register(&rx51_gpio_keys_device); -} -#else -static void __init rx51_add_gpio_keys(void) -{ -} -#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */ - -static uint32_t board_keymap[] = { - /* - * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row - * connected to the ground" matrix state. - */ - KEY(0, 0, KEY_Q), - KEY(0, 1, KEY_O), - KEY(0, 2, KEY_P), - KEY(0, 3, KEY_COMMA), - KEY(0, 4, KEY_BACKSPACE), - KEY(0, 6, KEY_A), - KEY(0, 7, KEY_S), - - KEY(1, 0, KEY_W), - KEY(1, 1, KEY_D), - KEY(1, 2, KEY_F), - KEY(1, 3, KEY_G), - KEY(1, 4, KEY_H), - KEY(1, 5, KEY_J), - KEY(1, 6, KEY_K), - KEY(1, 7, KEY_L), - - KEY(2, 0, KEY_E), - KEY(2, 1, KEY_DOT), - KEY(2, 2, KEY_UP), - KEY(2, 3, KEY_ENTER), - KEY(2, 5, KEY_Z), - KEY(2, 6, KEY_X), - KEY(2, 7, KEY_C), - KEY(2, 8, KEY_F9), - - KEY(3, 0, KEY_R), - KEY(3, 1, KEY_V), - KEY(3, 2, KEY_B), - KEY(3, 3, KEY_N), - KEY(3, 4, KEY_M), - KEY(3, 5, KEY_SPACE), - KEY(3, 6, KEY_SPACE), - KEY(3, 7, KEY_LEFT), - - KEY(4, 0, KEY_T), - KEY(4, 1, KEY_DOWN), - KEY(4, 2, KEY_RIGHT), - KEY(4, 4, KEY_LEFTCTRL), - KEY(4, 5, KEY_RIGHTALT), - KEY(4, 6, KEY_LEFTSHIFT), - KEY(4, 8, KEY_F10), - - KEY(5, 0, KEY_Y), - KEY(5, 8, KEY_F11), - - KEY(6, 0, KEY_U), - - KEY(7, 0, KEY_I), - KEY(7, 1, KEY_F7), - KEY(7, 2, KEY_F8), -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data rx51_kp_data = { - .keymap_data = &board_map_data, - .rows = 8, - .cols = 8, - .rep = 1, -}; - -/* Enable input logic and pull all lines up when eMMC is on. */ -static struct omap_board_mux rx51_mmc2_on_mux[] = { - OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -/* Disable input logic and pull all lines down when eMMC is off. */ -static struct omap_board_mux rx51_mmc2_off_mux[] = { - OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -static struct omap_mux_partition *partition; - -/* - * Current flows to eMMC when eMMC is off and the data lines are pulled up, - * so pull them down. N.B. we pull 8 lines because we are using 8 lines. - */ -static void rx51_mmc2_remux(struct device *dev, int slot, int power_on) -{ - if (power_on) - omap_mux_write_array(partition, rx51_mmc2_on_mux); - else - omap_mux_write_array(partition, rx51_mmc2_off_mux); -} - -static struct omap2_hsmmc_info mmc[] __initdata = { - { - .name = "external", - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .cover_only = true, - .gpio_cd = 160, - .gpio_wp = -EINVAL, - .power_saving = true, - }, - { - .name = "internal", - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - /* See also rx51_mmc2_remux */ - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .nonremovable = true, - .power_saving = true, - .remux = rx51_mmc2_remux, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply rx51_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply rx51_vaux2_supply[] = { - REGULATOR_SUPPLY("vdds_csib", "omap3isp"), -}; - -static struct regulator_consumer_supply rx51_vaux3_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -static struct regulator_consumer_supply rx51_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), -}; - -static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { - /* tlv320aic3x analog supplies */ - REGULATOR_SUPPLY("AVDD", "2-0018"), - REGULATOR_SUPPLY("DRVDD", "2-0018"), - REGULATOR_SUPPLY("AVDD", "2-0019"), - REGULATOR_SUPPLY("DRVDD", "2-0019"), - /* tpa6130a2 */ - REGULATOR_SUPPLY("Vdd", "2-0060"), - /* Keep vmmc as last item. It is not iterated for newer boards */ - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -static struct regulator_consumer_supply rx51_vio_supplies[] = { - /* tlv320aic3x digital supplies */ - REGULATOR_SUPPLY("IOVDD", "2-0018"), - REGULATOR_SUPPLY("DVDD", "2-0018"), - REGULATOR_SUPPLY("IOVDD", "2-0019"), - REGULATOR_SUPPLY("DVDD", "2-0019"), - /* Si4713 IO supply */ - REGULATOR_SUPPLY("vio", "2-0063"), -}; - -static struct regulator_consumer_supply rx51_vaux1_consumers[] = { - REGULATOR_SUPPLY("vdds_sdi", "omapdss"), - /* Si4713 supply */ - REGULATOR_SUPPLY("vdd", "2-0063"), -}; - -static struct regulator_init_data rx51_vaux1 = { - .constraints = { - .name = "V28", - .min_uV = 2800000, - .max_uV = 2800000, - .always_on = true, /* due battery cover sensor */ - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vaux1_consumers), - .consumer_supplies = rx51_vaux1_consumers, -}; - -static struct regulator_init_data rx51_vaux2 = { - .constraints = { - .name = "VCSI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supply), - .consumer_supplies = rx51_vaux2_supply, -}; - -/* VAUX3 - adds more power to VIO_18 rail */ -static struct regulator_init_data rx51_vaux3_cam = { - .constraints = { - .name = "VCAM_DIG_18", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data rx51_vaux3_mmc = { - .constraints = { - .name = "VMMC2_30", - .min_uV = 2800000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply), - .consumer_supplies = rx51_vaux3_supply, -}; - -static struct regulator_init_data rx51_vaux4 = { - .constraints = { - .name = "VCAM_ANA_28", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data rx51_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply), - .consumer_supplies = rx51_vmmc1_supply, -}; - -static struct regulator_init_data rx51_vmmc2 = { - .constraints = { - .name = "V28_A", - .min_uV = 2800000, - .max_uV = 3000000, - .always_on = true, /* due VIO leak to AIC34 VDDs */ - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies), - .consumer_supplies = rx51_vmmc2_supplies, -}; - -static struct regulator_init_data rx51_vpll1 = { - .constraints = { - .name = "VPLL", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct regulator_init_data rx51_vpll2 = { - .constraints = { - .name = "VSDI_CSI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct regulator_init_data rx51_vsim = { - .constraints = { - .name = "VMMC2_IO_18", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply), - .consumer_supplies = rx51_vsim_supply, -}; - -static struct regulator_init_data rx51_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies), - .consumer_supplies = rx51_vio_supplies, -}; - -static struct regulator_init_data rx51_vintana1 = { - .constraints = { - .name = "VINTANA1", - .min_uV = 1500000, - .max_uV = 1500000, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct regulator_init_data rx51_vintana2 = { - .constraints = { - .name = "VINTANA2", - .min_uV = 2750000, - .max_uV = 2750000, - .apply_uV = true, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct regulator_init_data rx51_vintdig = { - .constraints = { - .name = "VINTDIG", - .min_uV = 1500000, - .max_uV = 1500000, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { - .gpio_reset = RX51_FMTX_RESET_GPIO, -}; - -static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = { - I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH), - .platform_data = &rx51_si4713_i2c_data, -}; - -static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = { - .i2c_bus = 2, - .subdev_board_info = &rx51_si4713_board_info, -}; - -static struct platform_device rx51_si4713_dev = { - .name = "radio-si4713", - .id = -1, - .dev = { - .platform_data = &rx51_si4713_data, - }, -}; - -static __init void rx51_init_si4713(void) -{ - int err; - - err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq"); - if (err) { - printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err); - return; - } - rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ); - platform_device_register(&rx51_si4713_dev); -} - -static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) -{ - /* FIXME this gpio setup is just a placeholder for now */ - gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); - gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en"); - - return 0; -} - -static struct twl4030_gpio_platform_data rx51_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, - .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) - | BIT(4) | BIT(5) - | BIT(8) | BIT(9) | BIT(10) | BIT(11) - | BIT(12) | BIT(13) | BIT(14) | BIT(15) - | BIT(16) | BIT(17) , - .setup = rx51_twlgpio_setup, -}; - -static struct twl4030_ins sleep_on_seq[] __initdata = { -/* - * Turn off everything - */ - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2}, -}; - -static struct twl4030_script sleep_on_script __initdata = { - .script = sleep_on_seq, - .size = ARRAY_SIZE(sleep_on_seq), - .flags = TWL4030_SLEEP_SCRIPT, -}; - -static struct twl4030_ins wakeup_seq[] __initdata = { -/* - * Reenable everything - */ - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, -}; - -static struct twl4030_script wakeup_script __initdata = { - .script = wakeup_seq, - .size = ARRAY_SIZE(wakeup_seq), - .flags = TWL4030_WAKEUP12_SCRIPT, -}; - -static struct twl4030_ins wakeup_p3_seq[] __initdata = { -/* - * Reenable everything - */ - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, -}; - -static struct twl4030_script wakeup_p3_script __initdata = { - .script = wakeup_p3_seq, - .size = ARRAY_SIZE(wakeup_p3_seq), - .flags = TWL4030_WAKEUP3_SCRIPT, -}; - -static struct twl4030_ins wrst_seq[] __initdata = { -/* - * Reset twl4030. - * Reset VDD1 regulator. - * Reset VDD2 regulator. - * Reset VPLL1 regulator. - * Enable sysclk output. - * Reenable twl4030. - */ - {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2}, - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE), - 0x13}, - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13}, - {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13}, - {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13}, - {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35}, - {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2}, - {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2}, -}; - -static struct twl4030_script wrst_script __initdata = { - .script = wrst_seq, - .size = ARRAY_SIZE(wrst_seq), - .flags = TWL4030_WRST_SCRIPT, -}; - -static struct twl4030_script *twl4030_scripts[] __initdata = { - /* wakeup12 script should be loaded before sleep script, otherwise a - board might hit retention before loading of wakeup script is - completed. This can cause boot failures depending on timing issues. - */ - &wakeup_script, - &sleep_on_script, - &wakeup_p3_script, - &wrst_script, -}; - -static struct twl4030_resconfig twl4030_rconfig[] __initdata = { - { .resource = RES_VDD1, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, - .remap_sleep = RES_STATE_OFF - }, - { .resource = RES_VDD2, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, - .remap_sleep = RES_STATE_OFF - }, - { .resource = RES_VPLL1, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, - .remap_sleep = RES_STATE_OFF - }, - { .resource = RES_VPLL2, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VAUX1, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VAUX2, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VAUX3, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VAUX4, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VMMC1, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VMMC2, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VDAC, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VSIM, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VIO, .devgroup = DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_32KCLKOUT, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_RESET, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_MAIN_REF, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { 0, 0}, -}; - -static struct twl4030_power_data rx51_t2scripts_data __initdata = { - .scripts = twl4030_scripts, - .num = ARRAY_SIZE(twl4030_scripts), - .resource_config = twl4030_rconfig, -}; - -struct twl4030_vibra_data rx51_vibra_data __initdata = { - .coexist = 0, -}; - -struct twl4030_audio_data rx51_audio_data __initdata = { - .audio_mclk = 26000000, - .vibra = &rx51_vibra_data, -}; - -static struct twl4030_platform_data rx51_twldata __initdata = { - /* platform_data for children goes here */ - .gpio = &rx51_gpio_data, - .keypad = &rx51_kp_data, - .power = &rx51_t2scripts_data, - .audio = &rx51_audio_data, - - .vaux1 = &rx51_vaux1, - .vaux2 = &rx51_vaux2, - .vaux4 = &rx51_vaux4, - .vmmc1 = &rx51_vmmc1, - .vpll1 = &rx51_vpll1, - .vpll2 = &rx51_vpll2, - .vsim = &rx51_vsim, - .vintana1 = &rx51_vintana1, - .vintana2 = &rx51_vintana2, - .vintdig = &rx51_vintdig, - .vio = &rx51_vio, -}; - -static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = { - .power_gpio = 98, -}; - -/* Audio setup data */ -static struct aic3x_setup_data rx51_aic34_setup = { - .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, - .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT, -}; - -static struct aic3x_pdata rx51_aic3x_data = { - .setup = &rx51_aic34_setup, - .gpio_reset = 60, -}; - -static struct aic3x_pdata rx51_aic3x_data2 = { - .gpio_reset = 60, -}; - -static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { - { - I2C_BOARD_INFO("tlv320aic3x", 0x18), - .platform_data = &rx51_aic3x_data, - }, - { - I2C_BOARD_INFO("tlv320aic3x", 0x19), - .platform_data = &rx51_aic3x_data2, - }, -#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) - { - I2C_BOARD_INFO("tsl2563", 0x29), - .platform_data = &rx51_tsl2563_platform_data, - }, -#endif -#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) - { - I2C_BOARD_INFO("lp5523", 0x32), - .platform_data = &rx51_lp5523_platform_data, - }, -#endif - { - I2C_BOARD_INFO("bq27200", 0x55), - }, - { - I2C_BOARD_INFO("tpa6130a2", 0x60), - .platform_data = &rx51_tpa6130a2_data, - } -}; - -static int __init rx51_i2c_init(void) -{ - if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || - system_rev >= SYSTEM_REV_B_USES_VAUX3) { - rx51_twldata.vaux3 = &rx51_vaux3_mmc; - /* Only older boards use VMMC2 for internal MMC */ - rx51_vmmc2.num_consumer_supplies--; - } else { - rx51_twldata.vaux3 = &rx51_vaux3_cam; - } - rx51_twldata.vmmc2 = &rx51_vmmc2; - omap3_pmic_get_config(&rx51_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, - TWL_COMMON_REGULATOR_VDAC); - - rx51_twldata.vdac->constraints.apply_uV = true; - rx51_twldata.vdac->constraints.name = "VDAC"; - - omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); - omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, - ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -static struct mtd_partition onenand_partitions[] = { - { - .name = "bootloader", - .offset = 0, - .size = 0x20000, - .mask_flags = MTD_WRITEABLE, /* Force read-only */ - }, - { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 0x60000, - }, - { - .name = "log", - .offset = MTDPART_OFS_APPEND, - .size = 0x40000, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 0x200000, - }, - { - .name = "initfs", - .offset = MTDPART_OFS_APPEND, - .size = 0x200000, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_onenand_platform_data board_onenand_data[] = { - { - .cs = 0, - .gpio_irq = 65, - .parts = onenand_partitions, - .nr_parts = ARRAY_SIZE(onenand_partitions), - .flags = ONENAND_SYNC_READWRITE, - } -}; -#endif - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - -static struct omap_smc91x_platform_data board_smc91x_data = { - .cs = 1, - .gpio_irq = 54, - .gpio_pwrdwn = 86, - .gpio_reset = 164, - .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL, -}; - -static void __init board_smc91x_init(void) -{ - omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_gpio(86, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(164, OMAP_PIN_OUTPUT); - - gpmc_smc91x_init(&board_smc91x_data); -} - -#else - -static inline void board_smc91x_init(void) -{ -} - -#endif - -static void rx51_wl1251_set_power(bool enable) -{ - gpio_set_value(RX51_WL1251_POWER_GPIO, enable); -} - -static struct gpio rx51_wl1251_gpios[] __initdata = { - { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" }, - { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, -}; - -static void __init rx51_init_wl1251(void) -{ - int irq, ret; - - ret = gpio_request_array(rx51_wl1251_gpios, - ARRAY_SIZE(rx51_wl1251_gpios)); - if (ret < 0) - goto error; - - irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); - if (irq < 0) - goto err_irq; - - wl1251_pdata.set_power = rx51_wl1251_set_power; - rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq; - - return; - -err_irq: - gpio_free(RX51_WL1251_IRQ_GPIO); - gpio_free(RX51_WL1251_POWER_GPIO); -error: - printk(KERN_ERR "wl1251 board initialisation failed\n"); - wl1251_pdata.set_power = NULL; - - /* - * Now rx51_peripherals_spi_board_info[1].irq is zero and - * set_power is null, and wl1251_probe() will fail. - */ -} - -static struct tsc2005_platform_data tsc2005_pdata = { - .ts_pressure_max = 2048, - .ts_pressure_fudge = 2, - .ts_x_max = 4096, - .ts_x_fudge = 4, - .ts_y_max = 4096, - .ts_y_fudge = 7, - .ts_x_plate_ohm = 280, - .esd_timeout_ms = 8000, -}; - -static struct gpio rx51_tsc2005_gpios[] __initdata = { - { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" }, - { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" }, -}; - -static void rx51_tsc2005_set_reset(bool enable) -{ - gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); -} - -static void __init rx51_init_tsc2005(void) -{ - int r; - - omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP); - - r = gpio_request_array(rx51_tsc2005_gpios, - ARRAY_SIZE(rx51_tsc2005_gpios)); - if (r < 0) { - printk(KERN_ERR "tsc2005 board initialization failed\n"); - tsc2005_pdata.esd_timeout_ms = 0; - return; - } - - tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; - rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = - gpio_to_irq(RX51_TSC2005_IRQ_GPIO); -} - -void __init rx51_peripherals_init(void) -{ - rx51_i2c_init(); - regulator_has_full_constraints(); - gpmc_onenand_init(board_onenand_data); - board_smc91x_init(); - rx51_add_gpio_keys(); - rx51_init_wl1251(); - rx51_init_tsc2005(); - rx51_init_si4713(); - spi_register_board_info(rx51_peripherals_spi_board_info, - ARRAY_SIZE(rx51_peripherals_spi_board_info)); - - partition = omap_mux_get("core"); - if (partition) - omap_hsmmc_init(mmc); - - rx51_charger_init(); -} - |