diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/mach-omap1/sleep.S')
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/mach-omap1/sleep.S | 368 |
1 files changed, 0 insertions, 368 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/sleep.S b/ANDROID_3.4.5/arch/arm/mach-omap1/sleep.S deleted file mode 100644 index 0e628743..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-omap1/sleep.S +++ /dev/null @@ -1,368 +0,0 @@ -/* - * linux/arch/arm/mach-omap1/sleep.S - * - * Low-level OMAP7XX/1510/1610 sleep/wakeUp support - * - * Initial SA1110 code: - * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> - * - * Adapted for PXA by Nicolas Pitre: - * Copyright (c) 2002 Monta Vista Software, Inc. - * - * Support for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/linkage.h> - -#include <asm/assembler.h> - -#include "iomap.h" -#include "pm.h" - - .text - - -/* - * Forces OMAP into deep sleep state - * - * omapXXXX_cpu_suspend() - * - * The values of the registers ARM_IDLECT1 and ARM_IDLECT2 are passed - * as arg0 and arg1 from caller. arg0 is stored in register r0 and arg1 - * in register r1. - * - * Note: This code get's copied to internal SRAM at boot. When the OMAP - * wakes up it continues execution at the point it went to sleep. - * - * Note: Because of errata work arounds we have processor specific functions - * here. They are mostly the same, but slightly different. - * - */ - -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - .align 3 -ENTRY(omap7xx_cpu_suspend) - - @ save registers on stack - stmfd sp!, {r0 - r12, lr} - - @ Drain write cache - mov r4, #0 - mcr p15, 0, r0, c7, c10, 4 - nop - - @ load base address of Traffic Controller - mov r6, #TCMIF_ASM_BASE & 0xff000000 - orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000 - orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00 - - @ prepare to put SDRAM into self-refresh manually - ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - orr r9, r7, #SELF_REFRESH_MODE & 0xff000000 - orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff - str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - - @ prepare to put EMIFS to Sleep - ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff - str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ do not disable PERCK (0x04) - mov r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - mov r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff - orr r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00 - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - @ disable instruction cache - mrc p15, 0, r9, c1, c0, 0 - bic r2, r9, #0x1000 - mcr p15, 0, r2, c1, c0, 0 - nop - -/* - * Let's wait for the next wake up event to wake us up. r0 can't be - * used here because r0 holds ARM_IDLECT1 - */ - mov r2, #0 - mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt -/* - * omap7xx_cpu_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack. - */ - @ re-enable Icache - mcr p15, 0, r9, c1, c0, 0 - - @ reset the ARM_IDLECT1 and ARM_IDLECT2. - strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - @ Restore EMIFF controls - str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ restore regs and return - ldmfd sp!, {r0 - r12, pc} - -ENTRY(omap7xx_cpu_suspend_sz) - .word . - omap7xx_cpu_suspend -#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ - -#ifdef CONFIG_ARCH_OMAP15XX - .align 3 -ENTRY(omap1510_cpu_suspend) - - @ save registers on stack - stmfd sp!, {r0 - r12, lr} - - @ load base address of Traffic Controller - mov r4, #TCMIF_ASM_BASE & 0xff000000 - orr r4, r4, #TCMIF_ASM_BASE & 0x00ff0000 - orr r4, r4, #TCMIF_ASM_BASE & 0x0000ff00 - - @ work around errata of OMAP1510 PDE bit for TC shut down - @ clear PDE bit - ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - bic r5, r5, #PDE_BIT & 0xff - str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ set PWD_EN bit - and r5, r5, #PWD_EN_BIT & 0xff - str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ prepare to put SDRAM into self-refresh manually - ldr r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - orr r5, r5, #SELF_REFRESH_MODE & 0xff000000 - orr r5, r5, #SELF_REFRESH_MODE & 0x000000ff - str r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - - @ prepare to put EMIFS to Sleep - ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - orr r5, r5, #IDLE_EMIFS_REQUEST & 0xff - str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff - orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - mov r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff - orr r3, r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff00 - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1510_2: - subs r5, r5, #1 - bne l_1510_2 -/* - * Let's wait for the next wake up event to wake us up. r0 can't be - * used here because r0 holds ARM_IDLECT1 - */ - mov r2, #0 - mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt -/* - * omap1510_cpu_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - @ restore regs and return - ldmfd sp!, {r0 - r12, pc} - -ENTRY(omap1510_cpu_suspend_sz) - .word . - omap1510_cpu_suspend -#endif /* CONFIG_ARCH_OMAP15XX */ - -#if defined(CONFIG_ARCH_OMAP16XX) - .align 3 -ENTRY(omap1610_cpu_suspend) - - @ save registers on stack - stmfd sp!, {r0 - r12, lr} - - @ Drain write cache - mov r4, #0 - mcr p15, 0, r0, c7, c10, 4 - nop - - @ Load base address of Traffic Controller - mov r6, #TCMIF_ASM_BASE & 0xff000000 - orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000 - orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00 - - @ Prepare to put SDRAM into self-refresh manually - ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - orr r9, r7, #SELF_REFRESH_MODE & 0xff000000 - orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff - str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - - @ Prepare to put EMIFS to Sleep - ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff - str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ Load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ Turn off clock domains - @ Do not disable PERCK (0x04) - mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ Request ARM idle - mov r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff - orr r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00 - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - -/* - * Let's wait for the next wake up event to wake us up. r0 can't be - * used here because r0 holds ARM_IDLECT1 - */ - mov r2, #0 - mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt - - @ Errata (HEL3SU467, section 1.4.4) specifies nop-instructions - @ according to this formula: - @ 2 + (4*DPLL_MULT)/DPLL_DIV/ARMDIV - @ Max DPLL_MULT = 18 - @ DPLL_DIV = 1 - @ ARMDIV = 1 - @ => 74 nop-instructions - nop - nop - nop - nop - nop - nop - nop - nop - nop - nop @10 - nop - nop - nop - nop - nop - nop - nop - nop - nop - nop @20 - nop - nop - nop - nop - nop - nop - nop - nop - nop - nop @30 - nop - nop - nop - nop - nop - nop - nop - nop - nop - nop @40 - nop - nop - nop - nop - nop - nop - nop - nop - nop - nop @50 - nop - nop - nop - nop - nop - nop - nop - nop - nop - nop @60 - nop - nop - nop - nop - nop - nop - nop - nop - nop - nop @70 - nop - nop - nop - nop @74 -/* - * omap1610_cpu_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack. - */ - @ Restore the ARM_IDLECT1 and ARM_IDLECT2. - strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - @ Restore EMIFF controls - str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ Restore regs and return - ldmfd sp!, {r0 - r12, pc} - -ENTRY(omap1610_cpu_suspend_sz) - .word . - omap1610_cpu_suspend -#endif /* CONFIG_ARCH_OMAP16XX */ |