diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/mach-ixp4xx/gtwx5715-setup.c')
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/mach-ixp4xx/gtwx5715-setup.c | 179 |
1 files changed, 0 insertions, 179 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gtwx5715-setup.c deleted file mode 100644 index 18ebc6be..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/gtwx5715-setup.c - * - * Gemtek GTWX5715 (Linksys WRV54G) board setup - * - * Copyright (C) 2004 George T. Joseph - * Derived from Coyote - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#include <linux/init.h> -#include <linux/device.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_8250.h> -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch - and operate as an SPI type interface. The details of the interface - are available on Kendin/Micrel's web site. */ - -#define GTWX5715_KSSPI_SELECT 5 -#define GTWX5715_KSSPI_TXD 6 -#define GTWX5715_KSSPI_CLOCK 7 -#define GTWX5715_KSSPI_RXD 12 - -/* The "reset" button is wired to GPIO 3. - The GPIO is brought "low" when the button is pushed. */ - -#define GTWX5715_BUTTON_GPIO 3 - -/* Board Label Front Label - LED1 Power - LED2 Wireless-G - LED3 not populated but could be - LED4 Internet - LED5 - LED8 Controlled by KS8995M Switch - LED9 DMZ */ - -#define GTWX5715_LED1_GPIO 2 -#define GTWX5715_LED2_GPIO 9 -#define GTWX5715_LED3_GPIO 8 -#define GTWX5715_LED4_GPIO 1 -#define GTWX5715_LED9_GPIO 4 - -/* - * Xscale UART registers are 32 bits wide with only the least - * significant 8 bits having any meaning. From a configuration - * perspective, this means 2 things... - * - * Setting .regshift = 2 so that the standard 16550 registers - * line up on every 4th byte. - * - * Shifting the register start virtual address +3 bytes when - * compiled big-endian. Since register writes are done on a - * single byte basis, if the shift isn't done the driver will - * write the value into the most significant byte of the register, - * which is ignored, instead of the least significant. - */ - -#ifdef __ARMEB__ -#define REG_OFFSET 3 -#else -#define REG_OFFSET 0 -#endif - -/* - * Only the second or "console" uart is connected on the gtwx5715. - */ - -static struct resource gtwx5715_uart_resources[] = { - { - .start = IXP4XX_UART2_BASE_PHYS, - .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_IXP4XX_UART2, - .end = IRQ_IXP4XX_UART2, - .flags = IORESOURCE_IRQ, - }, - { }, -}; - - -static struct plat_serial8250_port gtwx5715_uart_platform_data[] = { - { - .mapbase = IXP4XX_UART2_BASE_PHYS, - .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, - { }, -}; - -static struct platform_device gtwx5715_uart_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = gtwx5715_uart_platform_data, - }, - .num_resources = 2, - .resource = gtwx5715_uart_resources, -}; - -static struct flash_platform_data gtwx5715_flash_data = { - .map_name = "cfi_probe", - .width = 2, -}; - -static struct resource gtwx5715_flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device gtwx5715_flash = { - .name = "IXP4XX-Flash", - .id = 0, - .dev = { - .platform_data = >wx5715_flash_data, - }, - .num_resources = 1, - .resource = >wx5715_flash_resource, -}; - -static struct platform_device *gtwx5715_devices[] __initdata = { - >wx5715_uart_device, - >wx5715_flash, -}; - -static void __init gtwx5715_init(void) -{ - ixp4xx_sys_init(); - - gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); - gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1; - - platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices)); -} - - -MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") - /* Maintainer: George Joseph */ - .map_io = ixp4xx_map_io, - .init_early = ixp4xx_init_early, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .atag_offset = 0x100, - .init_machine = gtwx5715_init, -#if defined(CONFIG_PCI) - .dma_zone_size = SZ_64M, -#endif - .restart = ixp4xx_restart, -MACHINE_END - - |