1 files changed, 0 insertions, 130 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-picotux200.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-picotux200.c
deleted file mode 100644
index 59e35dd1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-picotux200.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-picotux200.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Kleinhenz Elektronik GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "generic.h"
-
-
-static void __init picotux200_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			  | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			  | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata picotux200_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata picotux200_usbh_data = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_mmc_data __initdata picotux200_mmc_data = {
-	.det_pin	= AT91_PIN_PB27,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PA17,
-	.vcc_pin	= -EINVAL,
-};
-
-#define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
-#define PICOTUX200_FLASH_SIZE	SZ_4M
-
-static struct physmap_flash_data picotux200_flash_data = {
-	.width	= 2,
-};
-
-static struct resource picotux200_flash_resource = {
-	.start		= PICOTUX200_FLASH_BASE,
-	.end		= PICOTUX200_FLASH_BASE + PICOTUX200_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device picotux200_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &picotux200_flash_data,
-			},
-	.resource	= &picotux200_flash_resource,
-	.num_resources	= 1,
-};
-
-static void __init picotux200_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&picotux200_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&picotux200_usbh_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* MMC */
-	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &picotux200_mmc_data);
-	/* NOR Flash */
-	platform_device_register(&picotux200_flash);
-}
-
-MACHINE_START(PICOTUX2XX, "picotux 200")
-	/* Maintainer: Kleinhenz Elektronik GmbH */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= picotux200_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= picotux200_board_init,
-MACHINE_END