Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 260 insertions, 0 deletions

diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
new file mode 100644
index 00000000..5ba18595
--- /dev/null
+++ b/drivers/usb/host/ohci-ssb.c
@@ -0,0 +1,260 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom USB-core OHCI driver
+ *
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005 Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/ssb/ssb.h>
+
+
+#define SSB_OHCI_TMSLOW_HOSTMODE	(1 << 29)
+
+struct ssb_ohci_device {
+	struct ohci_hcd ohci; /* _must_ be at the beginning. */
+
+	u32 enable_flags;
+};
+
+static inline
+struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
+{
+	return (struct ssb_ohci_device *)(hcd->hcd_priv);
+}
+
+
+static int ssb_ohci_reset(struct usb_hcd *hcd)
+{
+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+	struct ohci_hcd *ohci = &ohcidev->ohci;
+	int err;
+
+	ohci_hcd_init(ohci);
+	err = ohci_init(ohci);
+
+	return err;
+}
+
+static int ssb_ohci_start(struct usb_hcd *hcd)
+{
+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+	struct ohci_hcd *ohci = &ohcidev->ohci;
+	int err;
+
+	err = ohci_run(ohci);
+	if (err < 0) {
+		ohci_err(ohci, "can't start\n");
+		ohci_stop(hcd);
+	}
+
+	return err;
+}
+
+static const struct hc_driver ssb_ohci_hc_driver = {
+	.description		= "ssb-usb-ohci",
+	.product_desc		= "SSB OHCI Controller",
+	.hcd_priv_size		= sizeof(struct ssb_ohci_device),
+
+	.irq			= ohci_irq,
+	.flags			= HCD_MEMORY | HCD_USB11,
+
+	.reset			= ssb_ohci_reset,
+	.start			= ssb_ohci_start,
+	.stop			= ohci_stop,
+	.shutdown		= ohci_shutdown,
+
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+
+	.get_frame_number	= ohci_get_frame,
+
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+static void ssb_ohci_detach(struct ssb_device *dev)
+{
+	struct usb_hcd *hcd = ssb_get_drvdata(dev);
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	ssb_device_disable(dev, 0);
+}
+
+static int ssb_ohci_attach(struct ssb_device *dev)
+{
+	struct ssb_ohci_device *ohcidev;
+	struct usb_hcd *hcd;
+	int err = -ENOMEM;
+	u32 tmp, flags = 0;
+
+	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+		return -EOPNOTSUPP;
+
+	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
+		/* Put the device into host-mode. */
+		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+		ssb_device_enable(dev, flags);
+	} else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
+		/*
+		 * USB 2.0 special considerations:
+		 *
+		 * In addition to the standard SSB reset sequence, the Host
+		 * Control Register must be programmed to bring the USB core
+		 * and various phy components out of reset.
+		 */
+		ssb_device_enable(dev, 0);
+		ssb_write32(dev, 0x200, 0x7ff);
+
+		/* Change Flush control reg */
+		tmp = ssb_read32(dev, 0x400);
+		tmp &= ~8;
+		ssb_write32(dev, 0x400, tmp);
+		tmp = ssb_read32(dev, 0x400);
+
+		/* Change Shim control reg */
+		tmp = ssb_read32(dev, 0x304);
+		tmp &= ~0x100;
+		ssb_write32(dev, 0x304, tmp);
+		tmp = ssb_read32(dev, 0x304);
+
+		udelay(1);
+
+		/* Work around for 5354 failures */
+		if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+			/* Change syn01 reg */
+			tmp = 0x00fe00fe;
+			ssb_write32(dev, 0x894, tmp);
+
+			/* Change syn03 reg */
+			tmp = ssb_read32(dev, 0x89c);
+			tmp |= 0x1;
+			ssb_write32(dev, 0x89c, tmp);
+		}
+	} else
+		ssb_device_enable(dev, 0);
+
+	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
+			dev_name(dev->dev));
+	if (!hcd)
+		goto err_dev_disable;
+	ohcidev = hcd_to_ssb_ohci(hcd);
+	ohcidev->enable_flags = flags;
+
+	tmp = ssb_read32(dev, SSB_ADMATCH0);
+	hcd->rsrc_start = ssb_admatch_base(tmp);
+	hcd->rsrc_len = ssb_admatch_size(tmp);
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs)
+		goto err_put_hcd;
+	err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+	if (err)
+		goto err_iounmap;
+
+	ssb_set_drvdata(dev, hcd);
+
+	return err;
+
+err_iounmap:
+	iounmap(hcd->regs);
+err_put_hcd:
+	usb_put_hcd(hcd);
+err_dev_disable:
+	ssb_device_disable(dev, flags);
+	return err;
+}
+
+static int ssb_ohci_probe(struct ssb_device *dev,
+		const struct ssb_device_id *id)
+{
+	int err;
+	u16 chipid_top;
+
+	/* USBcores are only connected on embedded devices. */
+	chipid_top = (dev->bus->chip_id & 0xFF00);
+	if (chipid_top != 0x4700 && chipid_top != 0x5300)
+		return -ENODEV;
+
+	/* TODO: Probably need checks here; is the core connected? */
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	/* We currently always attach SSB_DEV_USB11_HOSTDEV
+	 * as HOST OHCI. If we want to attach it as Client device,
+	 * we must branch here and call into the (yet to
+	 * be written) Client mode driver. Same for remove(). */
+
+	err = ssb_ohci_attach(dev);
+
+	return err;
+}
+
+static void ssb_ohci_remove(struct ssb_device *dev)
+{
+	ssb_ohci_detach(dev);
+}
+
+#ifdef CONFIG_PM
+
+static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
+{
+	ssb_device_disable(dev, 0);
+
+	return 0;
+}
+
+static int ssb_ohci_resume(struct ssb_device *dev)
+{
+	struct usb_hcd *hcd = ssb_get_drvdata(dev);
+	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+
+	ssb_device_enable(dev, ohcidev->enable_flags);
+
+	ohci_finish_controller_resume(hcd);
+	return 0;
+}
+
+#else /* !CONFIG_PM */
+#define ssb_ohci_suspend	NULL
+#define ssb_ohci_resume	NULL
+#endif /* CONFIG_PM */
+
+static const struct ssb_device_id ssb_ohci_table[] = {
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+	SSB_DEVTABLE_END
+};
+MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
+
+static struct ssb_driver ssb_ohci_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= ssb_ohci_table,
+	.probe		= ssb_ohci_probe,
+	.remove		= ssb_ohci_remove,
+	.suspend	= ssb_ohci_suspend,
+	.resume		= ssb_ohci_resume,
+};