dirty fix to merging

1 files changed, 389 insertions, 0 deletions

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
new file mode 100644
index 00000000..7e88c3e4
--- /dev/null
+++ b/drivers/regulator/Kconfig
@@ -0,0 +1,389 @@
+menuconfig REGULATOR
+	bool "Voltage and Current Regulator Support"
+	help
+	  Generic Voltage and Current Regulator support.
+
+	  This framework is designed to provide a generic interface to voltage
+	  and current regulators within the Linux kernel. It's intended to
+	  provide voltage and current control to client or consumer drivers and
+	  also provide status information to user space applications through a
+	  sysfs interface.
+
+	  The intention is to allow systems to dynamically control regulator
+	  output in order to save power and prolong battery life. This applies
+	  to both voltage regulators (where voltage output is controllable) and
+	  current sinks (where current output is controllable).
+
+	  This framework safely compiles out if not selected so that client
+	  drivers can still be used in systems with no software controllable
+	  regulators.
+
+	  If unsure, say no.
+
+if REGULATOR
+
+config REGULATOR_DEBUG
+	bool "Regulator debug support"
+	help
+	  Say yes here to enable debugging support.
+
+config REGULATOR_DUMMY
+	bool "Provide a dummy regulator if regulator lookups fail"
+	help
+	  If this option is enabled then when a regulator lookup fails
+	  and the board has not specified that it has provided full
+	  constraints then the regulator core will provide an always
+	  enabled dummy regulator will be provided, allowing consumer
+	  drivers to continue.
+
+	  A warning will be generated when this substitution is done.
+
+config REGULATOR_FIXED_VOLTAGE
+	tristate "Fixed voltage regulator support"
+	help
+	  This driver provides support for fixed voltage regulators,
+	  useful for systems which use a combination of software
+	  managed regulators and simple non-configurable regulators.
+
+config REGULATOR_VIRTUAL_CONSUMER
+	tristate "Virtual regulator consumer support"
+	help
+	  This driver provides a virtual consumer for the voltage and
+          current regulator API which provides sysfs controls for
+          configuring the supplies requested.  This is mainly useful
+          for test purposes.
+
+          If unsure, say no.
+
+config REGULATOR_USERSPACE_CONSUMER
+	tristate "Userspace regulator consumer support"
+	help
+	  There are some classes of devices that are controlled entirely
+	  from user space. Userspace consumer driver provides ability to
+	  control power supplies for such devices.
+
+          If unsure, say no.
+
+config REGULATOR_GPIO
+	tristate "GPIO regulator support"
+	depends on GENERIC_GPIO
+	help
+	  This driver provides support for regulators that can be
+	  controlled via gpios.
+	  It is capable of supporting current and voltage regulators
+	  and the platform has to provide a mapping of GPIO-states
+	  to target volts/amps.
+
+config REGULATOR_AD5398
+	tristate "Analog Devices AD5398/AD5821 regulators"
+	depends on I2C
+	help
+	  This driver supports AD5398 and AD5821 current regulator chips.
+	  If building into module, its name is ad5398.ko.
+
+config REGULATOR_AAT2870
+	tristate "AnalogicTech AAT2870 Regulators"
+	depends on MFD_AAT2870_CORE
+	help
+	  If you have a AnalogicTech AAT2870 say Y to enable the
+	  regulator driver.
+
+config REGULATOR_DA903X
+	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
+	depends on PMIC_DA903X
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  Dialog Semiconductor DA9030/DA9034 PMIC.
+
+config REGULATOR_DA9052
+	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
+	depends on PMIC_DA9052
+	help
+	  This driver supports the voltage regulators of DA9052-BC and
+	  DA9053-AA/Bx PMIC.
+
+config REGULATOR_ANATOP
+	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
+	depends on MFD_ANATOP
+	help
+	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
+	  regulators. It is recommended that this option be
+	  enabled on i.MX6 platform.
+
+config REGULATOR_MC13XXX_CORE
+	tristate
+
+config REGULATOR_MC13783
+	tristate "Freescale MC13783 regulator driver"
+	depends on MFD_MC13783
+	select REGULATOR_MC13XXX_CORE
+	help
+	  Say y here to support the regulators found on the Freescale MC13783
+	  PMIC.
+
+config REGULATOR_MC13892
+	tristate "Freescale MC13892 regulator driver"
+	depends on MFD_MC13XXX
+	select REGULATOR_MC13XXX_CORE
+	help
+	  Say y here to support the regulators found on the Freescale MC13892
+	  PMIC.
+
+config REGULATOR_ISL6271A
+	tristate "Intersil ISL6271A Power regulator"
+	depends on I2C
+	help
+	  This driver supports ISL6271A voltage regulator chip.
+
+config REGULATOR_88PM8607
+	bool "Marvell 88PM8607 Power regulators"
+	depends on MFD_88PM860X=y
+	help
+	  This driver supports 88PM8607 voltage regulator chips.
+
+config REGULATOR_MAX1586
+	tristate "Maxim 1586/1587 voltage regulator"
+	depends on I2C
+	help
+	  This driver controls a Maxim 1586 or 1587 voltage output
+	  regulator via I2C bus. The provided regulator is suitable
+	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
+
+config REGULATOR_MAX8649
+	tristate "Maxim 8649 voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver controls a Maxim 8649 voltage output regulator via
+	  I2C bus.
+
+config REGULATOR_MAX8660
+	tristate "Maxim 8660/8661 voltage regulator"
+	depends on I2C
+	help
+	  This driver controls a Maxim 8660/8661 voltage output
+	  regulator via I2C bus.
+
+config REGULATOR_MAX8925
+	tristate "Maxim MAX8925 Power Management IC"
+	depends on MFD_MAX8925
+	help
+	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
+
+config REGULATOR_MAX8952
+	tristate "Maxim MAX8952 Power Management IC"
+	depends on I2C
+	help
+	  This driver controls a Maxim 8952 voltage output regulator
+	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
+	  modes ranging from 0.77V to 1.40V by 0.01V steps.
+
+config REGULATOR_MAX8997
+	tristate "Maxim 8997/8966 regulator"
+	depends on MFD_MAX8997
+	help
+	  This driver controls a Maxim 8997/8966 regulator
+	  via I2C bus. The provided regulator is suitable for S5PC110,
+	  S5PV210, and Exynos-4 chips to control VCC_CORE and
+	  VCC_USIM voltages.
+
+config REGULATOR_MAX8998
+	tristate "Maxim 8998 voltage regulator"
+	depends on MFD_MAX8998
+	help
+	  This driver controls a Maxim 8998 voltage output regulator
+	  via I2C bus. The provided regulator is suitable for S3C6410
+	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
+
+config REGULATOR_PCAP
+	tristate "Motorola PCAP2 regulator driver"
+	depends on EZX_PCAP
+	help
+	 This driver provides support for the voltage regulators of the
+	 PCAP2 PMIC.
+
+config REGULATOR_LP3971
+	tristate "National Semiconductors LP3971 PMIC regulator driver"
+	depends on I2C
+	help
+	 Say Y here to support the voltage regulators and convertors
+	 on National Semiconductors LP3971 PMIC
+
+config REGULATOR_LP3972
+	tristate "National Semiconductors LP3972 PMIC regulator driver"
+	depends on I2C
+	help
+	 Say Y here to support the voltage regulators and convertors
+	 on National Semiconductors LP3972 PMIC
+
+config REGULATOR_PCF50633
+	tristate "NXP PCF50633 regulator driver"
+        depends on MFD_PCF50633
+	help
+	 Say Y here to support the voltage regulators and convertors
+	 on PCF50633
+
+config REGULATOR_S5M8767
+	tristate "Samsung S5M8767A voltage regulator"
+	depends on MFD_S5M_CORE
+	help
+	 This driver supports a Samsung S5M8767A voltage output regulator
+	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
+	 supports DVS mode with 8bits of output voltage control.
+
+config REGULATOR_AB3100
+	tristate "ST-Ericsson AB3100 Regulator functions"
+	depends on AB3100_CORE
+	default y if AB3100_CORE
+	help
+	 These regulators correspond to functionality in the
+	 AB3100 analog baseband dealing with power regulators
+	 for the system.
+
+config REGULATOR_AB8500
+	bool "ST-Ericsson AB8500 Power Regulators"
+	depends on AB8500_CORE
+	help
+	  This driver supports the regulators found on the ST-Ericsson mixed
+	  signal AB8500 PMIC
+
+config REGULATOR_DBX500_PRCMU
+	bool
+
+config REGULATOR_DB8500_PRCMU
+	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
+	depends on MFD_DB8500_PRCMU
+	select REGULATOR_DBX500_PRCMU
+	help
+	  This driver supports the voltage domain regulators controlled by the
+	  DB8500 PRCMU
+
+config REGULATOR_TPS6105X
+	tristate "TI TPS6105X Power regulators"
+	depends on TPS6105X
+	default y if TPS6105X
+	help
+	  This driver supports TPS61050/TPS61052 voltage regulator chips.
+	  It is a single boost converter primarily for white LEDs and
+	  audio amplifiers.
+
+config REGULATOR_TPS62360
+	tristate "TI TPS62360 Power Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports TPS62360 voltage regulator chip. This
+	  regulator is meant for processor core supply. This chip is
+	  high-frequency synchronous step down dc-dc converter optimized
+	  for battery-powered portable applications.
+
+config REGULATOR_TPS65023
+	tristate "TI TPS65023 Power regulators"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
+	  three step-down converters and two general-purpose LDO voltage regulators.
+	  It supports TI's software based Class-2 SmartReflex implementation.
+
+config REGULATOR_TPS6507X
+	tristate "TI TPS6507X Power regulators"
+	depends on I2C
+	help
+	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
+	  three step-down converters and two general-purpose LDO voltage regulators.
+	  It supports TI's software based Class-2 SmartReflex implementation.
+
+config REGULATOR_TPS65217
+	tristate "TI TPS65217 Power regulators"
+	depends on MFD_TPS65217
+	help
+	  This driver supports TPS65217 voltage regulator chips. TPS65217
+	  provides three step-down converters and four general-purpose LDO
+	  voltage regulators. It supports software based voltage control
+	  for different voltage domains
+
+config REGULATOR_TPS6524X
+	tristate "TI TPS6524X Power regulators"
+	depends on SPI
+	help
+	  This driver supports TPS6524X voltage regulator chips. TPS6524X
+	  provides three step-down converters and two general-purpose LDO
+	  voltage regulators.  This device is interfaced using a customized
+	  serial interface currently supported on the sequencer serial
+	  port controller.
+
+config REGULATOR_TPS6586X
+	tristate "TI TPS6586X Power regulators"
+	depends on MFD_TPS6586X
+	help
+	  This driver supports TPS6586X voltage regulator chips.
+
+config REGULATOR_TPS65910
+	tristate "TI TPS65910/TPS65911 Power Regulators"
+	depends on MFD_TPS65910
+	help
+	  This driver supports TPS65910/TPS65911 voltage regulator chips.
+
+config REGULATOR_TPS65912
+	tristate "TI TPS65912 Power regulator"
+	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
+	help
+	    This driver supports TPS65912 voltage regulator chip.
+
+config REGULATOR_TWL4030
+	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
+	depends on TWL4030_CORE
+	help
+	  This driver supports the voltage regulators provided by
+	  this family of companion chips.
+
+config REGULATOR_WM831X
+	tristate "Wolfson Microelectronics WM831x PMIC regulators"
+	depends on MFD_WM831X
+	help
+	  Support the voltage and current regulators of the WM831x series
+	  of PMIC devices.
+
+config REGULATOR_WM8350
+	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
+	depends on MFD_WM8350
+	help
+	  This driver provides support for the voltage and current regulators
+          of the WM8350 AudioPlus PMIC.
+
+config REGULATOR_WM8400
+	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
+	depends on MFD_WM8400
+	help
+	  This driver provides support for the voltage regulators of the
+	  WM8400 AudioPlus PMIC.
+
+config REGULATOR_WM8994
+	tristate "Wolfson Microelectronics WM8994 CODEC"
+	depends on MFD_WM8994
+	help
+	  This driver provides support for the voltage regulators on the
+	  WM8994 CODEC.
+
+
+config REGULATOR_WMTGPIO
+	bool "WMT GPIO PMIC"
+	help
+	  This driver supports the voltage regulators provided by
+	  this family of companion chips.
+
+config REGULATOR_UPI6631
+	bool "UPI6631"
+	help
+	  This driver supports the voltage regulators provided by
+	  this family of companion chips.
+
+config REGULATOR_GMT2214
+	bool "GMT2214"
+	help
+	  This driver supports the voltage regulators provided by
+	  this family of companion chips.
+
+endif
+