Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 326 insertions, 0 deletions

diff --git a/drivers/net/wireless/rtl8188C_8192C/include/autoconf.h b/drivers/net/wireless/rtl8188C_8192C/include/autoconf.h
new file mode 100755
index 00000000..a5cc0c99
--- /dev/null
+++ b/drivers/net/wireless/rtl8188C_8192C/include/autoconf.h
@@ -0,0 +1,326 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *                                        
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+/*
+ * Public  General Config
+ */
+#define AUTOCONF_INCLUDED
+#define RTL871X_MODULE_NAME "92CU"
+#define DRV_NAME "rtl8192cu"
+
+#define CONFIG_USB_HCI	1
+
+#define CONFIG_RTL8192C	1
+
+#define PLATFORM_LINUX	1
+
+#define CONFIG_IOCTL_CFG80211 1
+#ifdef CONFIG_PLATFORM_ARM_SUNxI
+	#ifndef CONFIG_IOCTL_CFG80211 
+		#define CONFIG_IOCTL_CFG80211 1
+	#endif
+#endif
+#ifdef CONFIG_IOCTL_CFG80211
+	#define RTW_USE_CFG80211_STA_EVENT /* Opne this for Android 4.1's wpa_supplicant */
+	#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
+	//#define CONFIG_DEBUG_CFG80211 1
+	//#define CONFIG_DRV_ISSUE_PROV_REQ // IOT FOR S2
+	#define CONFIG_SET_SCAN_DENY_TIMER
+#endif
+
+/*
+ * Internal  General Config
+ */
+//#define CONFIG_PWRCTRL
+//#define CONFIG_H2CLBK
+
+#define CONFIG_EMBEDDED_FWIMG	1
+//#define CONFIG_FILE_FWIMG
+
+#ifdef CONFIG_WAKE_ON_WLAN
+#define CONFIG_WOWLAN 1
+#endif //CONFIG_WAKE_ON_WLAN
+
+#define CONFIG_R871X_TEST	1
+
+#define CONFIG_XMIT_ACK
+#ifdef CONFIG_XMIT_ACK
+	#define CONFIG_XMIT_ACK_POLLING
+	#define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
+#endif
+
+#define CONFIG_80211N_HT	1
+
+#define CONFIG_RECV_REORDERING_CTRL	1
+
+//#define CONFIG_TCP_CSUM_OFFLOAD_RX	1
+
+//#define CONFIG_BEFORE_LINKED_DIG	
+//#define CONFIG_DRVEXT_MODULE	1
+
+#ifndef CONFIG_MP_INCLUDED
+	#define CONFIG_IPS	1
+	#ifdef CONFIG_IPS
+		//#define CONFIG_IPS_LEVEL_2	1 //enable this to set default IPS mode to IPS_LEVEL_2
+	#endif
+	
+	#define SUPPORT_HW_RFOFF_DETECTED	1
+
+	#define CONFIG_LPS	1
+	#define CONFIG_BT_COEXIST	1
+
+	//befor link
+	#define CONFIG_ANTENNA_DIVERSITY
+	
+	//after link
+	#ifdef CONFIG_ANTENNA_DIVERSITY
+		#define CONFIG_SW_ANTENNA_DIVERSITY	 
+		//#define CONFIG_HW_ANTENNA_DIVERSITY	
+	#endif
+
+	#define CONFIG_IOL
+#else 	//#ifndef CONFIG_MP_INCLUDED
+	#define CONFIG_MP_IWPRIV_SUPPORT	1
+#endif 	//#ifndef CONFIG_MP_INCLUDED
+
+#define CONFIG_AP_MODE	1
+#ifdef CONFIG_AP_MODE
+	#define CONFIG_NATIVEAP_MLME	1
+	#ifndef CONFIG_NATIVEAP_MLME
+		#define CONFIG_HOSTAPD_MLME	1
+	#endif			
+	#define CONFIG_FIND_BEST_CHANNEL	1
+	//#define CONFIG_NO_WIRELESS_HANDLERS	1
+#endif
+
+//	Added by Albert 20110314
+#define CONFIG_P2P	1
+#ifdef CONFIG_P2P
+	//Added by Albert 20110812
+	//The CONFIG_WFD is for supporting the Wi-Fi display
+	#define CONFIG_WFD	1
+	
+	#ifndef CONFIG_WIFI_TEST
+		#define CONFIG_P2P_REMOVE_GROUP_INFO
+	#endif
+	//#define CONFIG_DBG_P2P
+
+	//#define CONFIG_P2P_PS
+	#define CONFIG_P2P_IPS
+#endif
+
+//	Added by Kurt 20110511
+//#define CONFIG_TDLS	1
+#ifdef CONFIG_TDLS
+//	#ifndef CONFIG_WFD
+//		#define CONFIG_WFD	1
+//	#endif
+//	#define CONFIG_TDLS_AUTOSETUP			1
+//	#define CONFIG_TDLS_AUTOCHECKALIVE		1
+#endif
+
+#define CONFIG_SKB_COPY	1//for amsdu
+
+#define CONFIG_LED
+#ifdef CONFIG_LED
+	#define CONFIG_SW_LED
+	#ifdef CONFIG_SW_LED
+		//#define CONFIG_LED_HANDLED_BY_CMD_THREAD
+	#endif
+#endif // CONFIG_LED
+
+
+
+#define USB_INTERFERENCE_ISSUE // this should be checked in all usb interface
+#define CONFIG_GLOBAL_UI_PID
+
+#define CONFIG_LAYER2_ROAMING
+#define CONFIG_LAYER2_ROAMING_RESUME
+//#define CONFIG_ADAPTOR_INFO_CACHING_FILE // now just applied on 8192cu only, should make it general...
+//#define CONFIG_RESUME_IN_WORKQUEUE
+//#define CONFIG_SET_SCAN_DENY_TIMER
+#define CONFIG_LONG_DELAY_ISSUE
+#define CONFIG_NEW_SIGNAL_STAT_PROCESS
+//#define CONFIG_SIGNAL_DISPLAY_DBM //display RX signal with dbm
+#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable */
+
+#ifdef CONFIG_IOL
+	#define CONFIG_IOL_LLT
+	#define CONFIG_IOL_MAC
+	#define CONFIG_IOL_BB_PHY_REG
+	#define CONFIG_IOL_BB_AGC_TAB
+	#define CONFIG_IOL_RF_RF90_PATH_A
+	#define CONFIG_IOL_RF_RF90_PATH_B
+#endif
+
+#define CONFIG_BR_EXT	1	// Enable NAT2.5 support for STA mode interface with a L2 Bridge
+#ifdef CONFIG_BR_EXT
+#define CONFIG_BR_EXT_BRNAME	"br0"
+#endif	// CONFIG_BR_EXT
+
+#define CONFIG_TX_MCAST2UNI	1	// Support IP multicast->unicast
+//#define CONFIG_CHECK_AC_LIFETIME 1	// Check packet lifetime of 4 ACs.
+
+#define CONFIG_CONCURRENT_MODE 1
+#ifdef CONFIG_CONCURRENT_MODE
+	#define CONFIG_TSF_RESET_OFFLOAD 1			// For 2 PORT TSF SYNC.
+	//#define CONFIG_HWPORT_SWAP				//Port0->Sec , Port1 -> Pri
+#endif	// CONFIG_CONCURRENT_MODE
+
+#define CONFIG_80211D
+
+/*
+ * Interface  Related Config
+ */
+//#define CONFIG_USB_INTERRUPT_IN_PIPE	1
+
+#ifndef CONFIG_MINIMAL_MEMORY_USAGE
+	#define CONFIG_USB_TX_AGGREGATION	1
+	#define CONFIG_USB_RX_AGGREGATION	1
+#endif
+
+#define CONFIG_PREALLOC_RECV_SKB	1
+//#define CONFIG_REDUCE_USB_TX_INT	1	// Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms.
+//#define CONFIG_EASY_REPLACEMENT	1
+
+/* 
+ * CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now!
+ */
+//#define CONFIG_USE_USB_BUFFER_ALLOC_TX 1	// Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms.
+//#define CONFIG_USE_USB_BUFFER_ALLOC_RX 1	// For RX path
+#ifdef CONFIG_PLATFORM_ARM_SUNxI
+	#ifndef 	CONFIG_USE_USB_BUFFER_ALLOC_TX 
+		#define CONFIG_USE_USB_BUFFER_ALLOC_TX
+	#endif
+#endif
+/* 
+ * USB VENDOR REQ BUFFER ALLOCATION METHOD
+ * if not set we'll use function local variable (stack memory)
+ */
+//#define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE
+#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
+
+#define CONFIG_USB_VENDOR_REQ_MUTEX
+#define CONFIG_VENDOR_REQ_RETRY
+
+//#define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ 1
+
+
+/*
+ * HAL  Related Config
+ */
+
+#define RTL8192C_RX_PACKET_NO_INCLUDE_CRC	1
+
+#define SUPPORTED_BLOCK_IO
+
+
+
+#define RTL8192CU_FW_DOWNLOAD_ENABLE	1
+
+#define CONFIG_ONLY_ONE_OUT_EP_TO_LOW	0
+
+#define CONFIG_OUT_EP_WIFI_MODE	0
+
+#define ENABLE_USB_DROP_INCORRECT_OUT	0
+
+#define RTL8192CU_ASIC_VERIFICATION	0	// For ASIC verification.
+
+#define RTL8192CU_ADHOC_WORKAROUND_SETTING	1
+
+#define DISABLE_BB_RF	0
+
+#define RTL8191C_FPGA_NETWORKTYPE_ADHOC 0
+
+#ifdef CONFIG_MP_INCLUDED
+	#define MP_DRIVER 1
+	#undef CONFIG_USB_TX_AGGREGATION
+	#undef CONFIG_USB_RX_AGGREGATION
+#else
+	#define MP_DRIVER 0
+#endif
+
+
+/*
+ * Platform  Related Config
+ */
+#ifdef CONFIG_PLATFORM_MN10300
+#define CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV
+
+#if	defined (CONFIG_SW_ANTENNA_DIVERSITY)
+	#undef CONFIG_SW_ANTENNA_DIVERSITY
+	#define CONFIG_HW_ANTENNA_DIVERSITY
+#endif
+
+#endif
+
+#ifdef CONFIG_WISTRON_PLATFORM
+
+#endif
+
+#ifdef CONFIG_PLATFORM_TI_DM365
+#define CONFIG_USE_USB_BUFFER_ALLOC_RX 1
+#endif
+
+
+/*
+ * Debug  Related Config
+ */
+//#define CONFIG_DEBUG_RTL871X
+
+#define DBG	0
+//#define CONFIG_DEBUG_RTL819X
+
+#define CONFIG_PROC_DEBUG	1
+
+//#define DBG_IO
+//#define DBG_DELAY_OS
+//#define DBG_MEM_ALLOC
+//#define DBG_IOCTL
+
+//#define DBG_TX
+//#define DBG_XMIT_BUF
+//#define DBG_TX_DROP_FRAME
+
+//#define DBG_RX_DROP_FRAME
+//#define DBG_RX_SEQ
+//#define DBG_RX_SIGNAL_DISPLAY_PROCESSING
+//#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap"
+
+//#define DBG_EXPIRATION_CHK
+
+
+//#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
+//#define DBG_ROAMING_TEST
+
+//#define DBG_HAL_INIT_PROFILING
+
+//#define DBG_MEMORY_LEAK	1
+
+#define DBG_CONFIG_ERROR_DETECT
+//#define DBG_CONFIG_ERROR_RESET
+
+//TX use 1 urb
+//#define CONFIG_SINGLE_XMIT_BUF
+//RX use 1 urb
+//#define CONFIG_SINGLE_RECV_BUF
+
+//turn off power tracking when traffic is busy
+//#define CONFIG_BUSY_TRAFFIC_SKIP_PWR_TRACK