Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 435 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-shared.h b/drivers/net/wireless/iwlwifi/iwl-shared.h
new file mode 100644
index 00000000..b515d657
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-shared.h
@@ -0,0 +1,435 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef __iwl_shared_h__
+#define __iwl_shared_h__
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/gfp.h>
+#include <net/mac80211.h>
+
+#include "iwl-commands.h"
+#include "iwl-fw.h"
+
+/**
+ * DOC: shared area - role and goal
+ *
+ * The shared area contains all the data exported by the upper layer to the
+ * other layers. Since the bus and transport layer shouldn't dereference
+ * iwl_priv, all the data needed by the upper layer and the transport / bus
+ * layer must be here.
+ * The shared area also holds pointer to all the other layers. This allows a
+ * layer to call a function from another layer.
+ *
+ * NOTE: All the layers hold a pointer to the shared area which must be shrd.
+ *	A few macros assume that (_m)->shrd points to the shared area no matter
+ *	what _m is.
+ *
+ * gets notifications about enumeration, suspend, resume.
+ * For the moment, the bus layer is not a linux kernel module as itself, and
+ * the module_init function of the driver must call the bus specific
+ * registration functions. These functions are listed at the end of this file.
+ * For the moment, there is only one implementation of this interface: PCI-e.
+ * This implementation is iwl-pci.c
+ */
+
+struct iwl_priv;
+struct iwl_trans;
+struct iwl_sensitivity_ranges;
+struct iwl_trans_ops;
+
+#define DRV_NAME        "iwlwifi"
+#define IWLWIFI_VERSION "in-tree:"
+#define DRV_COPYRIGHT	"Copyright(c) 2003-2012 Intel Corporation"
+#define DRV_AUTHOR     "<ilw@linux.intel.com>"
+
+extern struct iwl_mod_params iwlagn_mod_params;
+
+#define IWL_DISABLE_HT_ALL	BIT(0)
+#define IWL_DISABLE_HT_TXAGG	BIT(1)
+#define IWL_DISABLE_HT_RXAGG	BIT(2)
+
+/**
+ * struct iwl_mod_params
+ *
+ * Holds the module parameters
+ *
+ * @sw_crypto: using hardware encryption, default = 0
+ * @disable_11n: disable 11n capabilities, default = 0,
+ *	use IWL_DISABLE_HT_* constants
+ * @amsdu_size_8K: enable 8K amsdu size, default = 1
+ * @antenna: both antennas (use diversity), default = 0
+ * @restart_fw: restart firmware, default = 1
+ * @plcp_check: enable plcp health check, default = true
+ * @ack_check: disable ack health check, default = false
+ * @wd_disable: enable stuck queue check, default = 0
+ * @bt_coex_active: enable bt coex, default = true
+ * @led_mode: system default, default = 0
+ * @no_sleep_autoadjust: disable autoadjust, default = true
+ * @power_save: disable power save, default = false
+ * @power_level: power level, default = 1
+ * @debug_level: levels are IWL_DL_*
+ * @ant_coupling: antenna coupling in dB, default = 0
+ * @bt_ch_announce: BT channel inhibition, default = enable
+ * @wanted_ucode_alternative: ucode alternative to use, default = 1
+ * @auto_agg: enable agg. without check, default = true
+ */
+struct iwl_mod_params {
+	int sw_crypto;
+	unsigned int disable_11n;
+	int amsdu_size_8K;
+	int antenna;
+	int restart_fw;
+	bool plcp_check;
+	bool ack_check;
+	int  wd_disable;
+	bool bt_coex_active;
+	int led_mode;
+	bool no_sleep_autoadjust;
+	bool power_save;
+	int power_level;
+	u32 debug_level;
+	int ant_coupling;
+	bool bt_ch_announce;
+	int wanted_ucode_alternative;
+	bool auto_agg;
+};
+
+/**
+ * struct iwl_hw_params
+ *
+ * Holds the module parameters
+ *
+ * @num_ampdu_queues: num of ampdu queues
+ * @tx_chains_num: Number of TX chains
+ * @rx_chains_num: Number of RX chains
+ * @valid_tx_ant: usable antennas for TX
+ * @valid_rx_ant: usable antennas for RX
+ * @ht40_channel: is 40MHz width possible: BIT(IEEE80211_BAND_XXX)
+ * @sku: sku read from EEPROM
+ * @rx_page_order: Rx buffer page order
+ * @ct_kill_threshold: temperature threshold - in hw dependent unit
+ * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit
+ *	relevant for 1000, 6000 and up
+ * @wd_timeout: TX queues watchdog timeout
+ * @struct iwl_sensitivity_ranges: range of sensitivity values
+ * @use_rts_for_aggregation: use rts/cts protection for HT traffic
+ */
+struct iwl_hw_params {
+	u8  num_ampdu_queues;
+	u8  tx_chains_num;
+	u8  rx_chains_num;
+	u8  valid_tx_ant;
+	u8  valid_rx_ant;
+	u8  ht40_channel;
+	bool use_rts_for_aggregation;
+	u16 sku;
+	u32 rx_page_order;
+	u32 ct_kill_threshold;
+	u32 ct_kill_exit_threshold;
+	unsigned int wd_timeout;
+
+	const struct iwl_sensitivity_ranges *sens;
+};
+
+/*
+ * LED mode
+ *    IWL_LED_DEFAULT:  use device default
+ *    IWL_LED_RF_STATE: turn LED on/off based on RF state
+ *			LED ON  = RF ON
+ *			LED OFF = RF OFF
+ *    IWL_LED_BLINK:    adjust led blink rate based on blink table
+ *    IWL_LED_DISABLE:	led disabled
+ */
+enum iwl_led_mode {
+	IWL_LED_DEFAULT,
+	IWL_LED_RF_STATE,
+	IWL_LED_BLINK,
+	IWL_LED_DISABLE,
+};
+
+/*
+ * @max_ll_items: max number of OTP blocks
+ * @shadow_ram_support: shadow support for OTP memory
+ * @led_compensation: compensate on the led on/off time per HW according
+ *	to the deviation to achieve the desired led frequency.
+ *	The detail algorithm is described in iwl-led.c
+ * @chain_noise_num_beacons: number of beacons used to compute chain noise
+ * @adv_thermal_throttle: support advance thermal throttle
+ * @support_ct_kill_exit: support ct kill exit condition
+ * @support_wimax_coexist: support wimax/wifi co-exist
+ * @plcp_delta_threshold: plcp error rate threshold used to trigger
+ *	radio tuning when there is a high receiving plcp error rate
+ * @chain_noise_scale: default chain noise scale used for gain computation
+ * @wd_timeout: TX queues watchdog timeout
+ * @max_event_log_size: size of event log buffer size for ucode event logging
+ * @shadow_reg_enable: HW shadhow register bit
+ * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
+ * @no_idle_support: do not support idle mode
+ * wd_disable: disable watchdog timer
+ */
+struct iwl_base_params {
+	int eeprom_size;
+	int num_of_queues;	/* def: HW dependent */
+	int num_of_ampdu_queues;/* def: HW dependent */
+	/* for iwl_apm_init() */
+	u32 pll_cfg_val;
+
+	const u16 max_ll_items;
+	const bool shadow_ram_support;
+	u16 led_compensation;
+	bool adv_thermal_throttle;
+	bool support_ct_kill_exit;
+	const bool support_wimax_coexist;
+	u8 plcp_delta_threshold;
+	s32 chain_noise_scale;
+	unsigned int wd_timeout;
+	u32 max_event_log_size;
+	const bool shadow_reg_enable;
+	const bool hd_v2;
+	const bool no_idle_support;
+	const bool wd_disable;
+};
+
+/*
+ * @advanced_bt_coexist: support advanced bt coexist
+ * @bt_init_traffic_load: specify initial bt traffic load
+ * @bt_prio_boost: default bt priority boost value
+ * @agg_time_limit: maximum number of uSec in aggregation
+ * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
+ */
+struct iwl_bt_params {
+	bool advanced_bt_coexist;
+	u8 bt_init_traffic_load;
+	u8 bt_prio_boost;
+	u16 agg_time_limit;
+	bool bt_sco_disable;
+	bool bt_session_2;
+};
+/*
+ * @use_rts_for_aggregation: use rts/cts protection for HT traffic
+ */
+struct iwl_ht_params {
+	const bool ht_greenfield_support; /* if used set to true */
+	bool use_rts_for_aggregation;
+	enum ieee80211_smps_mode smps_mode;
+};
+
+/**
+ * struct iwl_cfg
+ * @name: Offical name of the device
+ * @fw_name_pre: Firmware filename prefix. The api version and extension
+ *	(.ucode) will be added to filename before loading from disk. The
+ *	filename is constructed as fw_name_pre<api>.ucode.
+ * @ucode_api_max: Highest version of uCode API supported by driver.
+ * @ucode_api_ok: oldest version of the uCode API that is OK to load
+ *	without a warning, for use in transitions
+ * @ucode_api_min: Lowest version of uCode API supported by driver.
+ * @max_inst_size: The maximal length of the fw inst section
+ * @max_data_size: The maximal length of the fw data section
+ * @valid_tx_ant: valid transmit antenna
+ * @valid_rx_ant: valid receive antenna
+ * @eeprom_ver: EEPROM version
+ * @eeprom_calib_ver: EEPROM calibration version
+ * @lib: pointer to the lib ops
+ * @additional_nic_config: additional nic configuration
+ * @base_params: pointer to basic parameters
+ * @ht_params: point to ht patameters
+ * @bt_params: pointer to bt parameters
+ * @need_temp_offset_calib: need to perform temperature offset calibration
+ * @no_xtal_calib: some devices do not need crystal calibration data,
+ *	don't send it to those
+ * @scan_rx_antennas: available antenna for scan operation
+ * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
+ * @adv_pm: advance power management
+ * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
+ * @internal_wimax_coex: internal wifi/wimax combo device
+ * @iq_invert: I/Q inversion
+ * @temp_offset_v2: support v2 of temperature offset calibration
+ *
+ * We enable the driver to be backward compatible wrt API version. The
+ * driver specifies which APIs it supports (with @ucode_api_max being the
+ * highest and @ucode_api_min the lowest). Firmware will only be loaded if
+ * it has a supported API version.
+ *
+ * The ideal usage of this infrastructure is to treat a new ucode API
+ * release as a new hardware revision.
+ */
+struct iwl_cfg {
+	/* params specific to an individual device within a device family */
+	const char *name;
+	const char *fw_name_pre;
+	const unsigned int ucode_api_max;
+	const unsigned int ucode_api_ok;
+	const unsigned int ucode_api_min;
+	const u32 max_data_size;
+	const u32 max_inst_size;
+	u8   valid_tx_ant;
+	u8   valid_rx_ant;
+	u16  eeprom_ver;
+	u16  eeprom_calib_ver;
+	const struct iwl_lib_ops *lib;
+	void (*additional_nic_config)(struct iwl_priv *priv);
+	/* params not likely to change within a device family */
+	const struct iwl_base_params *base_params;
+	/* params likely to change within a device family */
+	const struct iwl_ht_params *ht_params;
+	const struct iwl_bt_params *bt_params;
+	const bool need_temp_offset_calib; /* if used set to true */
+	const bool no_xtal_calib;
+	u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
+	enum iwl_led_mode led_mode;
+	const bool adv_pm;
+	const bool rx_with_siso_diversity;
+	const bool internal_wimax_coex;
+	const bool iq_invert;
+	const bool temp_offset_v2;
+};
+
+/**
+ * struct iwl_shared - shared fields for all the layers of the driver
+ *
+ * @status: STATUS_*
+ * @wowlan: are we running wowlan uCode
+ * @valid_contexts: microcode/device supports multiple contexts
+ * @bus: pointer to the bus layer data
+ * @cfg: see struct iwl_cfg
+ * @priv: pointer to the upper layer data
+ * @trans: pointer to the transport layer data
+ * @nic: pointer to the nic data
+ * @hw_params: see struct iwl_hw_params
+ * @lock: protect general shared data
+ * @eeprom: pointer to the eeprom/OTP image
+ * @ucode_type: indicator of loaded ucode image
+ * @device_pointers: pointers to ucode event tables
+ */
+struct iwl_shared {
+	unsigned long status;
+	u8 valid_contexts;
+
+	const struct iwl_cfg *cfg;
+	struct iwl_trans *trans;
+	void *drv;
+	struct iwl_hw_params hw_params;
+	const struct iwl_fw *fw;
+
+	/* eeprom -- this is in the card's little endian byte order */
+	u8 *eeprom;
+
+	/* ucode related variables */
+	enum iwl_ucode_type ucode_type;
+
+	struct {
+		u32 error_event_table;
+		u32 log_event_table;
+	} device_pointers;
+
+};
+
+/*Whatever _m is (iwl_trans, iwl_priv, these macros will work */
+#define cfg(_m)		((_m)->shrd->cfg)
+#define trans(_m)	((_m)->shrd->trans)
+#define hw_params(_m)	((_m)->shrd->hw_params)
+
+static inline bool iwl_have_debug_level(u32 level)
+{
+	return iwlagn_mod_params.debug_level & level;
+}
+
+enum iwl_rxon_context_id {
+	IWL_RXON_CTX_BSS,
+	IWL_RXON_CTX_PAN,
+
+	NUM_IWL_RXON_CTX
+};
+
+int iwlagn_hw_valid_rtc_data_addr(u32 addr);
+const char *get_cmd_string(u8 cmd);
+
+#define IWL_CMD(x) case x: return #x
+
+/*****************************************************
+* DRIVER STATUS FUNCTIONS
+******************************************************/
+#define STATUS_HCMD_ACTIVE	0	/* host command in progress */
+/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
+#define STATUS_INT_ENABLED	2
+#define STATUS_RF_KILL_HW	3
+#define STATUS_CT_KILL		4
+#define STATUS_INIT		5
+#define STATUS_ALIVE		6
+#define STATUS_READY		7
+#define STATUS_TEMPERATURE	8
+#define STATUS_GEO_CONFIGURED	9
+#define STATUS_EXIT_PENDING	10
+#define STATUS_STATISTICS	12
+#define STATUS_SCANNING		13
+#define STATUS_SCAN_ABORTING	14
+#define STATUS_SCAN_HW		15
+#define STATUS_POWER_PMI	16
+#define STATUS_FW_ERROR		17
+#define STATUS_DEVICE_ENABLED	18
+#define STATUS_CHANNEL_SWITCH_PENDING 19
+#define STATUS_SCAN_COMPLETE	20
+
+#endif /* #__iwl_shared_h__ */