Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 776 insertions, 0 deletions

diff --git a/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6330/bcmsdh_linux.c b/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6330/bcmsdh_linux.c
new file mode 100755
index 00000000..8ac05ab5
--- /dev/null
+++ b/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6330/bcmsdh_linux.c
@@ -0,0 +1,776 @@
+/*
+ * SDIO access interface for drivers - linux specific (pci only)
+ *
+ * Copyright (C) 1999-2012, Broadcom Corporation
+ * 
+ *      Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ * 
+ *      As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module.  An independent module is a module which is not
+ * derived from this software.  The special exception does not apply to any
+ * modifications of the software.
+ * 
+ *      Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdh_linux.c 373359 2012-12-07 06:36:37Z $
+ */
+
+/**
+ * @file bcmsdh_linux.c
+ */
+
+#define __UNDEF_NO_VERSION__
+
+#include <typedefs.h>
+#include <linuxver.h>
+
+#include <linux/pci.h>
+#include <linux/completion.h>
+
+#include <osl.h>
+#include <pcicfg.h>
+#include <bcmdefs.h>
+#include <bcmdevs.h>
+
+#if defined(OOB_INTR_ONLY)
+#include <linux/irq.h>
+extern void dhdsdio_isr(void * args);
+#include <bcmutils.h>
+#include <dngl_stats.h>
+#include <dhd.h>
+#endif 
+
+
+/**
+ * SDIO Host Controller info
+ */
+typedef struct bcmsdh_hc bcmsdh_hc_t;
+
+struct bcmsdh_hc {
+	bcmsdh_hc_t *next;
+#ifdef BCMPLATFORM_BUS
+	struct device *dev;			/* platform device handle */
+#else
+	struct pci_dev *dev;		/* pci device handle */
+#endif /* BCMPLATFORM_BUS */
+	osl_t *osh;
+	void *regs;			/* SDIO Host Controller address */
+	bcmsdh_info_t *sdh;		/* SDIO Host Controller handle */
+	void *ch;
+	unsigned int oob_irq;
+	unsigned long oob_flags; /* OOB Host specifiction as edge and etc */
+	bool oob_irq_registered;
+	bool oob_irq_enable_flag;
+#if defined(OOB_INTR_ONLY)
+	spinlock_t irq_lock;
+#endif 
+};
+static bcmsdh_hc_t *sdhcinfo = NULL;
+
+/* driver info, initialized when bcmsdh_register is called */
+static bcmsdh_driver_t drvinfo = {NULL, NULL};
+
+/* debugging macros */
+#define SDLX_MSG(x) printf x
+
+/**
+ * Checks to see if vendor and device IDs match a supported SDIO Host Controller.
+ */
+bool
+bcmsdh_chipmatch(uint16 vendor, uint16 device)
+{
+	/* Add other vendors and devices as required */
+
+#ifdef BCMSDIOH_STD
+	/* Check for Arasan host controller */
+	if (vendor == VENDOR_SI_IMAGE) {
+		return (TRUE);
+	}
+	/* Check for BRCM 27XX Standard host controller */
+	if (device == BCM27XX_SDIOH_ID && vendor == VENDOR_BROADCOM) {
+		return (TRUE);
+	}
+	/* Check for BRCM Standard host controller */
+	if (device == SDIOH_FPGA_ID && vendor == VENDOR_BROADCOM) {
+		return (TRUE);
+	}
+	/* Check for TI PCIxx21 Standard host controller */
+	if (device == PCIXX21_SDIOH_ID && vendor == VENDOR_TI) {
+		return (TRUE);
+	}
+	if (device == PCIXX21_SDIOH0_ID && vendor == VENDOR_TI) {
+		return (TRUE);
+	}
+	/* Ricoh R5C822 Standard SDIO Host */
+	if (device == R5C822_SDIOH_ID && vendor == VENDOR_RICOH) {
+		return (TRUE);
+	}
+	/* JMicron Standard SDIO Host */
+	if (device == JMICRON_SDIOH_ID && vendor == VENDOR_JMICRON) {
+		return (TRUE);
+	}
+
+#endif /* BCMSDIOH_STD */
+#ifdef BCMSDIOH_SPI
+	/* This is the PciSpiHost. */
+	if (device == SPIH_FPGA_ID && vendor == VENDOR_BROADCOM) {
+		printf("Found PCI SPI Host Controller\n");
+		return (TRUE);
+	}
+
+#endif /* BCMSDIOH_SPI */
+
+	return (FALSE);
+}
+
+#if defined(BCMPLATFORM_BUS)
+#if defined(BCMLXSDMMC)
+/* forward declarations */
+int bcmsdh_probe(struct device *dev);
+int bcmsdh_remove(struct device *dev);
+
+EXPORT_SYMBOL(bcmsdh_probe);
+EXPORT_SYMBOL(bcmsdh_remove);
+
+#else
+/* forward declarations */
+static int __devinit bcmsdh_probe(struct device *dev);
+static int __devexit bcmsdh_remove(struct device *dev);
+#endif 
+
+#if !defined(BCMLXSDMMC)
+static
+#endif 
+int bcmsdh_probe(struct device *dev)
+{
+	osl_t *osh = NULL;
+	bcmsdh_hc_t *sdhc = NULL;
+	ulong regs = 0;
+	bcmsdh_info_t *sdh = NULL;
+#if !defined(BCMLXSDMMC) && defined(BCMPLATFORM_BUS)
+	struct platform_device *pdev;
+	struct resource *r;
+#endif 
+	int irq = 0;
+	uint32 vendevid;
+	unsigned long irq_flags = 0;
+
+#if !defined(BCMLXSDMMC) && defined(BCMPLATFORM_BUS)
+	pdev = to_platform_device(dev);
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!r || irq == NO_IRQ)
+		return -ENXIO;
+#endif 
+
+#if defined(OOB_INTR_ONLY)
+#ifdef HW_OOB
+	irq_flags =
+		IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL | IORESOURCE_IRQ_SHAREABLE;
+#else
+	 irq_flags = IRQF_TRIGGER_FALLING;
+#endif /* HW_OOB */
+
+	/* Get customer specific OOB IRQ parametres: IRQ number as IRQ type */
+	irq = dhd_customer_oob_irq_map(&irq_flags);
+#if	defined(CONFIG_ARCH_RHEA) || defined(CONFIG_ARCH_CAPRI)
+	/* Do not disable this IRQ during suspend */
+	irq_flags |= IRQF_NO_SUSPEND;
+#endif /* defined(CONFIG_ARCH_RHEA) || defined(CONFIG_ARCH_CAPRI) */
+	if  (irq < 0) {
+		SDLX_MSG(("%s: Host irq is not defined\n", __FUNCTION__));
+		return 1;
+	}
+#endif 
+	/* allocate SDIO Host Controller state info */
+	if (!(osh = osl_attach(dev, PCI_BUS, FALSE))) {
+		SDLX_MSG(("%s: osl_attach failed\n", __FUNCTION__));
+		goto err;
+	}
+	if (!(sdhc = MALLOC(osh, sizeof(bcmsdh_hc_t)))) {
+		SDLX_MSG(("%s: out of memory, allocated %d bytes\n",
+			__FUNCTION__,
+			MALLOCED(osh)));
+		goto err;
+	}
+	bzero(sdhc, sizeof(bcmsdh_hc_t));
+	sdhc->osh = osh;
+
+	sdhc->dev = (void *)dev;
+
+#if defined(BCMLXSDMMC)
+	if (!(sdh = bcmsdh_attach(osh, (void *)0,
+	                          (void **)&regs, irq))) {
+		SDLX_MSG(("%s: bcmsdh_attach failed\n", __FUNCTION__));
+		goto err;
+	}
+#else
+	if (!(sdh = bcmsdh_attach(osh, (void *)r->start,
+	                          (void **)&regs, irq))) {
+		SDLX_MSG(("%s: bcmsdh_attach failed\n", __FUNCTION__));
+		goto err;
+	}
+#endif 
+	sdhc->sdh = sdh;
+	sdhc->oob_irq = irq;
+	sdhc->oob_flags = irq_flags;
+	sdhc->oob_irq_registered = FALSE;	/* to make sure.. */
+	sdhc->oob_irq_enable_flag = FALSE;
+#if defined(OOB_INTR_ONLY)
+	spin_lock_init(&sdhc->irq_lock);
+#endif 
+
+	/* chain SDIO Host Controller info together */
+	sdhc->next = sdhcinfo;
+	sdhcinfo = sdhc;
+
+	/* Read the vendor/device ID from the CIS */
+	vendevid = bcmsdh_query_device(sdh);
+	/* try to attach to the target device */
+	if (!(sdhc->ch = drvinfo.attach((vendevid >> 16),
+	                                 (vendevid & 0xFFFF), 0, 0, 0, 0,
+	                                (void *)regs, NULL, sdh))) {
+		SDLX_MSG(("%s: device attach failed\n", __FUNCTION__));
+		goto err;
+	}
+
+	return 0;
+
+	/* error handling */
+err:
+	if (sdhc) {
+		if (sdhc->sdh)
+			bcmsdh_detach(sdhc->osh, sdhc->sdh);
+		MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
+	}
+	if (osh)
+		osl_detach(osh);
+	return -ENODEV;
+}
+
+#if !defined(BCMLXSDMMC)
+static
+#endif 
+int bcmsdh_remove(struct device *dev)
+{
+	bcmsdh_hc_t *sdhc, *prev;
+	osl_t *osh;
+
+	sdhc = sdhcinfo;
+	drvinfo.detach(sdhc->ch);
+	bcmsdh_detach(sdhc->osh, sdhc->sdh);
+
+	/* find the SDIO Host Controller state for this pdev and take it out from the list */
+	for (sdhc = sdhcinfo, prev = NULL; sdhc; sdhc = sdhc->next) {
+		if (sdhc->dev == (void *)dev) {
+			if (prev)
+				prev->next = sdhc->next;
+			else
+				sdhcinfo = NULL;
+			break;
+		}
+		prev = sdhc;
+	}
+	if (!sdhc) {
+		SDLX_MSG(("%s: failed\n", __FUNCTION__));
+		return 0;
+	}
+
+	/* release SDIO Host Controller info */
+	osh = sdhc->osh;
+	MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
+	osl_detach(osh);
+
+#if !defined(BCMLXSDMMC) || defined(OOB_INTR_ONLY)
+	dev_set_drvdata(dev, NULL);
+#endif 
+
+	return 0;
+}
+
+#else /* BCMPLATFORM_BUS */
+
+#if !defined(BCMLXSDMMC)
+/* forward declarations for PCI probe and remove functions. */
+static int __devinit bcmsdh_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void __devexit bcmsdh_pci_remove(struct pci_dev *pdev);
+
+/**
+ * pci id table
+ */
+static struct pci_device_id bcmsdh_pci_devid[] __devinitdata = {
+	{ vendor: PCI_ANY_ID,
+	device: PCI_ANY_ID,
+	subvendor: PCI_ANY_ID,
+	subdevice: PCI_ANY_ID,
+	class: 0,
+	class_mask: 0,
+	driver_data: 0,
+	},
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, bcmsdh_pci_devid);
+
+/**
+ * SDIO Host Controller pci driver info
+ */
+static struct pci_driver bcmsdh_pci_driver = {
+	node:		{},
+	name:		"bcmsdh",
+	id_table:	bcmsdh_pci_devid,
+	probe:		bcmsdh_pci_probe,
+	remove:		bcmsdh_pci_remove,
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
+	save_state:	NULL,
+#endif
+	suspend:	NULL,
+	resume:		NULL,
+	};
+
+
+extern uint sd_pci_slot;	/* Force detection to a particular PCI */
+							/* slot only . Allows for having multiple */
+							/* WL devices at once in a PC */
+							/* Only one instance of dhd will be */
+							/* usable at a time */
+							/* Upper word is bus number, */
+							/* lower word is slot number */
+							/* Default value of 0xffffffff turns this */
+							/* off */
+module_param(sd_pci_slot, uint, 0);
+
+
+/**
+ * Detect supported SDIO Host Controller and attach if found.
+ *
+ * Determine if the device described by pdev is a supported SDIO Host
+ * Controller.  If so, attach to it and attach to the target device.
+ */
+static int __devinit
+bcmsdh_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	osl_t *osh = NULL;
+	bcmsdh_hc_t *sdhc = NULL;
+	ulong regs;
+	bcmsdh_info_t *sdh = NULL;
+	int rc;
+
+	if (sd_pci_slot != 0xFFFFffff) {
+		if (pdev->bus->number != (sd_pci_slot>>16) ||
+			PCI_SLOT(pdev->devfn) != (sd_pci_slot&0xffff)) {
+			SDLX_MSG(("%s: %s: bus %X, slot %X, vend %X, dev %X\n",
+				__FUNCTION__,
+				bcmsdh_chipmatch(pdev->vendor, pdev->device)
+				?"Found compatible SDIOHC"
+				:"Probing unknown device",
+				pdev->bus->number, PCI_SLOT(pdev->devfn), pdev->vendor,
+				pdev->device));
+			return -ENODEV;
+		}
+		SDLX_MSG(("%s: %s: bus %X, slot %X, vendor %X, device %X (good PCI location)\n",
+			__FUNCTION__,
+			bcmsdh_chipmatch(pdev->vendor, pdev->device)
+			?"Using compatible SDIOHC"
+			:"WARNING, forced use of unkown device",
+			pdev->bus->number, PCI_SLOT(pdev->devfn), pdev->vendor, pdev->device));
+	}
+
+	if ((pdev->vendor == VENDOR_TI) && ((pdev->device == PCIXX21_FLASHMEDIA_ID) ||
+	    (pdev->device == PCIXX21_FLASHMEDIA0_ID))) {
+		uint32 config_reg;
+
+		SDLX_MSG(("%s: Disabling TI FlashMedia Controller.\n", __FUNCTION__));
+		if (!(osh = osl_attach(pdev, PCI_BUS, FALSE))) {
+			SDLX_MSG(("%s: osl_attach failed\n", __FUNCTION__));
+			goto err;
+		}
+
+		config_reg = OSL_PCI_READ_CONFIG(osh, 0x4c, 4);
+
+		/*
+		 * Set MMC_SD_DIS bit in FlashMedia Controller.
+		 * Disbling the SD/MMC Controller in the FlashMedia Controller
+		 * allows the Standard SD Host Controller to take over control
+		 * of the SD Slot.
+		 */
+		config_reg |= 0x02;
+		OSL_PCI_WRITE_CONFIG(osh, 0x4c, 4, config_reg);
+		osl_detach(osh);
+	}
+	/* match this pci device with what we support */
+	/* we can't solely rely on this to believe it is our SDIO Host Controller! */
+	if (!bcmsdh_chipmatch(pdev->vendor, pdev->device)) {
+		return -ENODEV;
+	}
+
+	/* this is a pci device we might support */
+	SDLX_MSG(("%s: Found possible SDIO Host Controller: bus %d slot %d func %d irq %d\n",
+		__FUNCTION__,
+		pdev->bus->number, PCI_SLOT(pdev->devfn),
+		PCI_FUNC(pdev->devfn), pdev->irq));
+
+	/* use bcmsdh_query_device() to get the vendor ID of the target device so
+	 * it will eventually appear in the Broadcom string on the console
+	 */
+
+	/* allocate SDIO Host Controller state info */
+	if (!(osh = osl_attach(pdev, PCI_BUS, FALSE))) {
+		SDLX_MSG(("%s: osl_attach failed\n", __FUNCTION__));
+		goto err;
+	}
+	if (!(sdhc = MALLOC(osh, sizeof(bcmsdh_hc_t)))) {
+		SDLX_MSG(("%s: out of memory, allocated %d bytes\n",
+			__FUNCTION__,
+			MALLOCED(osh)));
+		goto err;
+	}
+	bzero(sdhc, sizeof(bcmsdh_hc_t));
+	sdhc->osh = osh;
+
+	sdhc->dev = pdev;
+
+	/* map to address where host can access */
+	pci_set_master(pdev);
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		SDLX_MSG(("%s: Cannot enable PCI device\n", __FUNCTION__));
+		goto err;
+	}
+	if (!(sdh = bcmsdh_attach(osh, (void *)(uintptr)pci_resource_start(pdev, 0),
+	                          (void **)&regs, pdev->irq))) {
+		SDLX_MSG(("%s: bcmsdh_attach failed\n", __FUNCTION__));
+		goto err;
+	}
+
+	sdhc->sdh = sdh;
+
+	/* try to attach to the target device */
+	if (!(sdhc->ch = drvinfo.attach(VENDOR_BROADCOM, /* pdev->vendor, */
+	                                bcmsdh_query_device(sdh) & 0xFFFF, 0, 0, 0, 0,
+	                                (void *)regs, NULL, sdh))) {
+		SDLX_MSG(("%s: device attach failed\n", __FUNCTION__));
+		goto err;
+	}
+
+	/* chain SDIO Host Controller info together */
+	sdhc->next = sdhcinfo;
+	sdhcinfo = sdhc;
+
+	return 0;
+
+	/* error handling */
+err:
+	if (sdhc) {
+		if (sdhc->sdh)
+			bcmsdh_detach(sdhc->osh, sdhc->sdh);
+		MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
+	}
+	if (osh)
+		osl_detach(osh);
+	return -ENODEV;
+}
+
+
+/**
+ * Detach from target devices and SDIO Host Controller
+ */
+static void __devexit
+bcmsdh_pci_remove(struct pci_dev *pdev)
+{
+	bcmsdh_hc_t *sdhc, *prev;
+	osl_t *osh;
+
+	/* find the SDIO Host Controller state for this pdev and take it out from the list */
+	for (sdhc = sdhcinfo, prev = NULL; sdhc; sdhc = sdhc->next) {
+		if (sdhc->dev == pdev) {
+			if (prev)
+				prev->next = sdhc->next;
+			else
+				sdhcinfo = NULL;
+			break;
+		}
+		prev = sdhc;
+	}
+	if (!sdhc)
+		return;
+
+	drvinfo.detach(sdhc->ch);
+
+	bcmsdh_detach(sdhc->osh, sdhc->sdh);
+
+	/* release SDIO Host Controller info */
+	osh = sdhc->osh;
+	MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
+	osl_detach(osh);
+}
+#endif /* BCMLXSDMMC */
+#endif /* BCMPLATFORM_BUS */
+
+extern int sdio_function_init(void);
+
+extern int sdio_func_reg_notify(void* semaphore);
+extern void sdio_func_unreg_notify(void);
+
+#if defined(BCMLXSDMMC)
+int bcmsdh_reg_sdio_notify(void* semaphore)
+{
+	return sdio_func_reg_notify(semaphore);
+}
+
+void bcmsdh_unreg_sdio_notify(void)
+{
+	sdio_func_unreg_notify();
+}
+#endif /* defined(BCMLXSDMMC) */
+
+int
+bcmsdh_register(bcmsdh_driver_t *driver)
+{
+	int error = 0;
+
+	drvinfo = *driver;
+
+#if defined(BCMPLATFORM_BUS)
+	SDLX_MSG(("%s: Linux Kernel SDIO/MMC Driver\n", __FUNCTION__));
+	error = sdio_function_init();
+	return error;
+#endif /* defined(BCMPLATFORM_BUS) */
+
+#if !defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
+	if (!(error = pci_module_init(&bcmsdh_pci_driver)))
+		return 0;
+#else
+	if (!(error = pci_register_driver(&bcmsdh_pci_driver)))
+		return 0;
+#endif
+
+	SDLX_MSG(("%s: pci_module_init failed 0x%x\n", __FUNCTION__, error));
+#endif /* BCMPLATFORM_BUS */
+
+	return error;
+}
+
+extern void sdio_function_cleanup(void);
+
+void
+bcmsdh_unregister(void)
+{
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
+	if (bcmsdh_pci_driver.node.next)
+#endif
+
+#if defined(BCMLXSDMMC)
+	sdio_function_cleanup();
+#endif /* BCMLXSDMMC */
+
+#if !defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
+	pci_unregister_driver(&bcmsdh_pci_driver);
+#endif /* BCMPLATFORM_BUS */
+}
+
+int bcmsdh_set_drvdata(void * dhdp)
+{
+	SDLX_MSG(("%s: Enter \n", __FUNCTION__));
+
+	dev_set_drvdata(sdhcinfo->dev, dhdp);
+
+	return 0;
+}
+
+#if defined(OOB_INTR_ONLY)
+void bcmsdh_oob_intr_set(bool enable)
+{
+	static bool curstate = 1;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdhcinfo->irq_lock, flags);
+	if (curstate != enable) {
+		if (enable)
+			enable_irq(sdhcinfo->oob_irq);
+		else
+			disable_irq_nosync(sdhcinfo->oob_irq);
+		curstate = enable;
+	}
+	spin_unlock_irqrestore(&sdhcinfo->irq_lock, flags);
+}
+
+static irqreturn_t wlan_oob_irq(int irq, void *dev_id)
+{
+	dhd_pub_t *dhdp;
+
+	dhdp = (dhd_pub_t *)dev_get_drvdata(sdhcinfo->dev);
+
+	bcmsdh_oob_intr_set(0);
+
+	if (dhdp == NULL) {
+		SDLX_MSG(("%s: Out of band GPIO interrupt fired way too early\n",
+			__FUNCTION__));
+		return IRQ_HANDLED;
+	}
+
+	dhdsdio_isr((void *)dhdp->bus);
+
+	return IRQ_HANDLED;
+}
+
+int bcmsdh_register_oob_intr(void * dhdp)
+{
+	int error = 0;
+
+	SDLX_MSG(("%s: Enter \n", __FUNCTION__));
+
+	/* IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL | IORESOURCE_IRQ_SHAREABLE; */
+
+	dev_set_drvdata(sdhcinfo->dev, dhdp);
+
+	if (!sdhcinfo->oob_irq_registered) {
+		SDLX_MSG(("%s: IRQ=%d Type=%X \n", __FUNCTION__,
+			(int)sdhcinfo->oob_irq, (int)sdhcinfo->oob_flags));
+		/* Refer to customer Host IRQ docs about proper irqflags definition */
+		error = request_irq(sdhcinfo->oob_irq, wlan_oob_irq, sdhcinfo->oob_flags,
+			"bcmsdh_sdmmc", NULL);
+		if (error)
+			return -ENODEV;
+
+#if defined(CONFIG_ARCH_RHEA) || defined(CONFIG_ARCH_CAPRI)
+		if (device_may_wakeup(sdhcinfo->dev)) {
+#endif
+			error = enable_irq_wake(sdhcinfo->oob_irq);
+#if defined(CONFIG_ARCH_RHEA) || defined(CONFIG_ARCH_CAPRI)
+		}
+#endif
+		if (error)
+			SDLX_MSG(("%s: enable_irq_wake error=%d \n", __FUNCTION__, error));
+		sdhcinfo->oob_irq_registered = TRUE;
+		sdhcinfo->oob_irq_enable_flag = TRUE;
+	}
+
+	return 0;
+}
+
+void bcmsdh_set_irq(int flag)
+{
+	if (sdhcinfo->oob_irq_registered && sdhcinfo->oob_irq_enable_flag != flag) {
+		SDLX_MSG(("%s: Flag = %d\n", __FUNCTION__, flag));
+		sdhcinfo->oob_irq_enable_flag = flag;
+		if (flag) {
+			enable_irq(sdhcinfo->oob_irq);
+#if defined(CONFIG_ARCH_RHEA) || defined(CONFIG_ARCH_CAPRI)
+			if (device_may_wakeup(sdhcinfo->dev))
+#endif
+				enable_irq_wake(sdhcinfo->oob_irq);
+		} else {
+#if defined(CONFIG_ARCH_RHEA) || defined(CONFIG_ARCH_CAPRI)
+			if (device_may_wakeup(sdhcinfo->dev))
+#endif
+				disable_irq_wake(sdhcinfo->oob_irq);
+			disable_irq(sdhcinfo->oob_irq);
+		}
+	}
+}
+
+void bcmsdh_unregister_oob_intr(void)
+{
+	SDLX_MSG(("%s: Enter\n", __FUNCTION__));
+
+	if (sdhcinfo->oob_irq_registered == TRUE) {
+		bcmsdh_set_irq(FALSE);
+		free_irq(sdhcinfo->oob_irq, NULL);
+		sdhcinfo->oob_irq_registered = FALSE;
+	}
+}
+#endif 
+
+#if defined(BCMLXSDMMC)
+void *bcmsdh_get_drvdata(void)
+{
+	if (!sdhcinfo)
+		return NULL;
+	return dev_get_drvdata(sdhcinfo->dev);
+}
+#endif
+
+/* Module parameters specific to each host-controller driver */
+
+extern uint sd_msglevel;	/* Debug message level */
+module_param(sd_msglevel, uint, 0);
+
+extern uint sd_power;	/* 0 = SD Power OFF, 1 = SD Power ON. */
+module_param(sd_power, uint, 0);
+
+extern uint sd_clock;	/* SD Clock Control, 0 = SD Clock OFF, 1 = SD Clock ON */
+module_param(sd_clock, uint, 0);
+
+extern uint sd_divisor;	/* Divisor (-1 means external clock) */
+module_param(sd_divisor, uint, 0);
+
+extern uint sd_sdmode;	/* Default is SD4, 0=SPI, 1=SD1, 2=SD4 */
+module_param(sd_sdmode, uint, 0);
+
+extern uint sd_hiok;	/* Ok to use hi-speed mode */
+module_param(sd_hiok, uint, 0);
+
+extern uint sd_f2_blocksize;
+module_param(sd_f2_blocksize, int, 0);
+
+#ifdef BCMSDIOH_STD
+extern int sd_uhsimode;
+module_param(sd_uhsimode, int, 0);
+#endif
+
+#ifdef BCMSDIOH_TXGLOM
+extern uint sd_txglom;
+module_param(sd_txglom, uint, 0);
+#endif
+
+#ifdef BCMSDH_MODULE
+EXPORT_SYMBOL(bcmsdh_attach);
+EXPORT_SYMBOL(bcmsdh_detach);
+EXPORT_SYMBOL(bcmsdh_intr_query);
+EXPORT_SYMBOL(bcmsdh_intr_enable);
+EXPORT_SYMBOL(bcmsdh_intr_disable);
+EXPORT_SYMBOL(bcmsdh_intr_reg);
+EXPORT_SYMBOL(bcmsdh_intr_dereg);
+
+#if defined(DHD_DEBUG)
+EXPORT_SYMBOL(bcmsdh_intr_pending);
+#endif
+
+EXPORT_SYMBOL(bcmsdh_devremove_reg);
+EXPORT_SYMBOL(bcmsdh_cfg_read);
+EXPORT_SYMBOL(bcmsdh_cfg_write);
+EXPORT_SYMBOL(bcmsdh_cis_read);
+EXPORT_SYMBOL(bcmsdh_reg_read);
+EXPORT_SYMBOL(bcmsdh_reg_write);
+EXPORT_SYMBOL(bcmsdh_regfail);
+EXPORT_SYMBOL(bcmsdh_send_buf);
+EXPORT_SYMBOL(bcmsdh_recv_buf);
+
+EXPORT_SYMBOL(bcmsdh_rwdata);
+EXPORT_SYMBOL(bcmsdh_abort);
+EXPORT_SYMBOL(bcmsdh_query_device);
+EXPORT_SYMBOL(bcmsdh_query_iofnum);
+EXPORT_SYMBOL(bcmsdh_iovar_op);
+EXPORT_SYMBOL(bcmsdh_register);
+EXPORT_SYMBOL(bcmsdh_unregister);
+EXPORT_SYMBOL(bcmsdh_chipmatch);
+EXPORT_SYMBOL(bcmsdh_reset);
+EXPORT_SYMBOL(bcmsdh_waitlockfree);
+
+EXPORT_SYMBOL(bcmsdh_get_dstatus);
+EXPORT_SYMBOL(bcmsdh_cfg_read_word);
+EXPORT_SYMBOL(bcmsdh_cfg_write_word);
+EXPORT_SYMBOL(bcmsdh_cur_sbwad);
+EXPORT_SYMBOL(bcmsdh_chipinfo);
+
+#endif /* BCMSDH_MODULE */