Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 4332 insertions, 0 deletions

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
new file mode 100644
index 00000000..00be451a
--- /dev/null
+++ b/drivers/mtd/nand/nand_base.c
@@ -0,0 +1,4332 @@
+/*
+ *  drivers/mtd/nand.c
+ *
+ *  Overview:
+ *   This is the generic MTD driver for NAND flash devices. It should be
+ *   capable of working with almost all NAND chips currently available.
+ *   Basic support for AG-AND chips is provided.
+ *
+ *	Additional technical information is available on
+ *	http://www.linux-mtd.infradead.org/doc/nand.html
+ *
+ *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ *		  2002-2006 Thomas Gleixner (tglx@linutronix.de)
+ *
+ *  Credits:
+ *	David Woodhouse for adding multichip support
+ *
+ *	Aleph One Ltd. and Toby Churchill Ltd. for supporting the
+ *	rework for 2K page size chips
+ *
+ *  TODO:
+ *	Enable cached programming for 2k page size chips
+ *	Check, if mtd->ecctype should be set to MTD_ECC_HW
+ *	if we have HW ECC support.
+ *	The AG-AND chips have nice features for speed improvement,
+ *	which are not supported yet. Read / program 4 pages in one go.
+ *	BBT table is not serialized, has to be fixed
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/nand_bch.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <linux/mtd/partitions.h>
+#include "../../../arch/arm/mach-wmt/wmt_clk.h"
+
+#include "wmt_nand.h"
+#define myDEBUG
+//#undef myDEBUG
+#ifdef myDEBUG
+#define DPRINTK(fmt, args...)   printk("%s: " fmt, __FUNCTION__ , ## args)
+#else
+#define DPRINTK(fmt, args...)
+#endif
+
+//#define DBG_60BIT_ECC
+
+#ifdef NAND_BBT_BCH_ECC
+
+#if(CONFIG_MTD_NAND_PAGE_SIZE == 2048)
+static struct nand_ecclayout wmt_oobinfo_2048_backup = {
+    /* nand flash new structure and BCH ECC oob info */
+	.eccbytes = 40,
+	.eccpos = { 0,  1,  2,  3,  4,  5,  6,  13, 14, 15, 
+                    16, 17, 18, 19, 20, 21, 22, 29, 30, 31,
+                    32, 33, 34, 35, 36, 37, 38, 45, 46, 47,
+                    48, 49, 50, 51, 52, 53, 54, 61, 62, 63},
+        .oobavail = 16,
+	.oobfree = {{9, 4},{25, 4},{41, 4},{57, 4}}
+};
+
+static struct nand_ecclayout wmt_hm_oobinfo_2048_backup = {
+    /*  nand flash old structure and Harming ECC oob info */
+    .eccbytes = 14,
+    .eccpos = { 32, 33, 34, 36, 37, 38, 40, 41, 42, 44, 45, 46, 48, 49},
+    .oobavail = 32,
+    .oobfree = {{0, 32}}
+};
+#else
+
+static struct nand_ecclayout wmt_hm_oobinfo_4096_backup = {
+    /*  nand flash old structure and Harming ECC oob info */
+    .eccbytes = 27,
+    .eccpos = { 64, 65, 66, 68, 69, 70, 72, 73, 74, 76, 77, 78,
+                80, 81, 82, 84, 85, 86, 88, 89, 90, 92, 93, 94,
+                96, 97, 98},
+    .oobavail = 64,
+    .oobfree = {{0, 32}}
+};
+
+static struct nand_ecclayout wmt_oobinfo_4096_backup = {
+    /*  nand flash old structure and Harming ECC oob info */
+    .eccbytes = 80,
+    .eccpos = { 0,  1,  2,  3,  4,  5,  6,  13, 14, 15, 
+                16, 17, 18, 19, 20, 21, 22, 29, 30, 31,
+                32, 33, 34, 35, 36, 37, 38, 45, 46, 47,
+                48, 49, 50, 51, 52, 53, 54, 61, 62, 63},
+             //   64, 65, 66, 67, 68, 69, 70, 77, 78, 79,
+             //   80, 81, 82, 83, 84, 85, 86, 93, 94, 95,
+             //   96, 97, 98, 99, 100,101,102,109,110,111,
+             //   112,113,114,115,116,117,118,125,126,127},
+        .oobavail = 16,
+	.oobfree = {{9, 4},{25, 4},{41, 4},{57, 4}}
+     //	.oobfree = {{9, 4},{25, 4},{41, 4},{57, 4},{73,4},{89,4},{105,4},{121,4}}
+};
+#endif
+
+#endif
+extern struct nand_bbt_descr largepage_flashbased;
+extern int second_chip;
+/* Define default oob placement schemes for large and small page devices */
+static struct nand_ecclayout nand_oob_8 = {
+	.eccbytes = 3,
+	.eccpos = {0, 1, 2},
+	.oobfree = {
+		{.offset = 3,
+		 .length = 2},
+		{.offset = 6,
+		 .length = 2} }
+};
+
+static struct nand_ecclayout nand_oob_16 = {
+	.eccbytes = 6,
+	.eccpos = {0, 1, 2, 3, 6, 7},
+	.oobfree = {
+		{.offset = 8,
+		 . length = 8} }
+};
+
+static struct nand_ecclayout nand_oob_64 = {
+	.eccbytes = 24,
+	.eccpos = {
+		   40, 41, 42, 43, 44, 45, 46, 47,
+		   48, 49, 50, 51, 52, 53, 54, 55,
+		   56, 57, 58, 59, 60, 61, 62, 63},
+	.oobfree = {
+		{.offset = 2,
+		 .length = 38} }
+};
+
+static struct nand_ecclayout nand_oob_128 = {
+	.eccbytes = 48,
+	.eccpos = {
+		   80, 81, 82, 83, 84, 85, 86, 87,
+		   88, 89, 90, 91, 92, 93, 94, 95,
+		   96, 97, 98, 99, 100, 101, 102, 103,
+		   104, 105, 106, 107, 108, 109, 110, 111,
+		   112, 113, 114, 115, 116, 117, 118, 119,
+		   120, 121, 122, 123, 124, 125, 126, 127},
+	.oobfree = {
+		{.offset = 2,
+		 .length = 78} }
+};
+
+static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd,
+			   int new_state);
+
+static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+			     struct mtd_oob_ops *ops);
+
+/*
+ * For devices which display every fart in the system on a separate LED. Is
+ * compiled away when LED support is disabled.
+ */
+//DEFINE_LED_TRIGGER(nand_led_trigger);
+
+static int check_offs_len(struct mtd_info *mtd,
+					loff_t ofs, uint64_t len)
+{
+	struct nand_chip *chip = mtd->priv;
+	int ret = 0;
+
+	/* Start address must align on block boundary */
+	if (ofs & ((1 << chip->phys_erase_shift) - 1)) {
+		pr_debug("%s: unaligned address\n", __func__);
+		ret = -EINVAL;
+	}
+
+	/* Length must align on block boundary */
+	if (len & ((1 << chip->phys_erase_shift) - 1)) {
+		pr_debug("%s: length not block aligned\n", __func__);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+/**
+ * nand_release_device - [GENERIC] release chip
+ * @mtd: MTD device structure
+ *
+ * Deselect, release chip lock and wake up anyone waiting on the device.
+ */
+static void nand_release_device(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	/* De-select the NAND device */
+	chip->select_chip(mtd, -1);
+
+	/* Release the controller and the chip */
+	spin_lock(&chip->controller->lock);
+	chip->controller->active = NULL;
+	chip->state = FL_READY;
+	wake_up(&chip->controller->wq);
+	spin_unlock(&chip->controller->lock);
+  auto_pll_divisor(DEV_NAND, CLK_DISABLE, 0, 0);
+}
+
+/**
+ * nand_read_byte - [DEFAULT] read one byte from the chip
+ * @mtd: MTD device structure
+ *
+ * Default read function for 8bit buswidth
+ */
+static uint8_t nand_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	return readb(chip->IO_ADDR_R);
+}
+
+int wmt_recovery_call(struct notifier_block *nb, unsigned long code, void *_cmd)
+{
+	struct mtd_info *mtd = NULL;
+	struct nand_chip *chip = NULL;
+	mtd = container_of(nb, struct mtd_info, reboot_notifier);
+	chip = (struct nand_chip *)mtd->priv;
+
+	if(chip->cur_chip && (((mtd->id >>24)&0xff) == NAND_MFR_HYNIX)) {
+		nand_get_device(chip, mtd, FL_WRITING);
+		#ifdef RETRY_DEBUG
+		printk("current try times: %d\n", chip->cur_chip->cur_try_times);
+		#endif
+		chip->select_chip(mtd, 0);
+		chip->cur_chip->set_parameter(mtd, READ_RETRY_MODE, DEFAULT_VALUE);
+		//chip->cur_chip->get_parameter(mtd,READ_RETRY_MODE);
+		chip->select_chip(mtd, -1);
+		nand_release_device(mtd);
+	}
+	return NOTIFY_DONE;
+}
+EXPORT_SYMBOL(wmt_recovery_call);
+
+/**
+ * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
+ * @mtd: MTD device structure
+ *
+ * Default read function for 16bit buswidth with endianness conversion.
+ *
+ */
+static uint8_t nand_read_byte16(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R));
+}
+
+/**
+ * nand_read_word - [DEFAULT] read one word from the chip
+ * @mtd: MTD device structure
+ *
+ * Default read function for 16bit buswidth without endianness conversion.
+ */
+static u16 nand_read_word(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	return readw(chip->IO_ADDR_R);
+}
+
+/**
+ * nand_select_chip - [DEFAULT] control CE line
+ * @mtd: MTD device structure
+ * @chipnr: chipnumber to select, -1 for deselect
+ *
+ * Default select function for 1 chip devices.
+ */
+static void nand_select_chip(struct mtd_info *mtd, int chipnr)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	switch (chipnr) {
+	case -1:
+		chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
+		break;
+	case 0:
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+/**
+ * nand_write_buf - [DEFAULT] write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ *
+ * Default write function for 8bit buswidth.
+ */
+static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	int i;
+	struct nand_chip *chip = mtd->priv;
+
+	for (i = 0; i < len; i++)
+		writeb(buf[i], chip->IO_ADDR_W);
+}
+
+/**
+ * nand_read_buf - [DEFAULT] read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ *
+ * Default read function for 8bit buswidth.
+ */
+static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	int i;
+	struct nand_chip *chip = mtd->priv;
+
+	for (i = 0; i < len; i++)
+		buf[i] = readb(chip->IO_ADDR_R);
+}
+
+/**
+ * nand_verify_buf - [DEFAULT] Verify chip data against buffer
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
+ *
+ * Default verify function for 8bit buswidth.
+ */
+static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	int i;
+	struct nand_chip *chip = mtd->priv;
+
+	for (i = 0; i < len; i++)
+		if (buf[i] != readb(chip->IO_ADDR_R))
+			return -EFAULT;
+	return 0;
+}
+
+/**
+ * nand_write_buf16 - [DEFAULT] write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ *
+ * Default write function for 16bit buswidth.
+ */
+static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	int i;
+	struct nand_chip *chip = mtd->priv;
+	u16 *p = (u16 *) buf;
+	len >>= 1;
+
+	for (i = 0; i < len; i++)
+		writew(p[i], chip->IO_ADDR_W);
+
+}
+
+/**
+ * nand_read_buf16 - [DEFAULT] read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ *
+ * Default read function for 16bit buswidth.
+ */
+static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	int i;
+	struct nand_chip *chip = mtd->priv;
+	u16 *p = (u16 *) buf;
+	len >>= 1;
+
+	for (i = 0; i < len; i++)
+		p[i] = readw(chip->IO_ADDR_R);
+}
+
+/**
+ * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
+ * @mtd: MTD device structure
+ * @buf: buffer containing the data to compare
+ * @len: number of bytes to compare
+ *
+ * Default verify function for 16bit buswidth.
+ */
+static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+	int i;
+	struct nand_chip *chip = mtd->priv;
+	u16 *p = (u16 *) buf;
+	len >>= 1;
+
+	for (i = 0; i < len; i++)
+		if (p[i] != readw(chip->IO_ADDR_R))
+			return -EFAULT;
+
+	return 0;
+}
+
+/**
+ * nand_block_bad - [DEFAULT] Read bad block marker from the chip
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
+ *
+ * Check, if the block is bad.
+ */
+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+	int page, chipnr, res = 0, i = 0;
+	struct nand_chip *chip = mtd->priv;
+	u16 bad;
+	int page1 = 0, pagecnt = mtd->pagecnt;
+
+	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+		ofs += mtd->erasesize - mtd->writesize;
+
+  if (mtd->planenum > 1) {//dan_multi
+		page = ((int)(ofs >> chip->page_shift) * mtd->planenum);
+		page1 = page + pagecnt;
+		page &= chip->pagemask;
+		page1 &= chip->pagemask;
+  } else
+		page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+
+	if (getchip) {
+		//chipnr = (int)(ofs >> chip->chip_shift);
+		chipnr = ((int)(ofs >> (10+chip->pagecnt_shift)))/(mtd->pageSizek*mtd->blkcnt);
+
+		nand_get_device(chip, mtd, FL_READING);
+
+		/* Select the NAND device */
+		chip->select_chip(mtd, chipnr);
+	}
+
+	do {
+		if (chip->options & NAND_BUSWIDTH_16) {
+			chip->cmdfunc(mtd, NAND_CMD_READOOB,
+					chip->badblockpos & 0xFE, page);
+			bad = cpu_to_le16(chip->read_word(mtd));
+			if (chip->badblockpos & 0x1)
+				bad >>= 8;
+			/*else
+				bad &= 0xFF;*/ //masked dan_multi
+			if ((bad & 0xFF) != 0xff)//dan_multi
+				res = 1;
+		} else {
+			chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos,	page);
+			//bad = chip->read_byte(mtd);
+      if (chip->read_byte(mtd) != 0xff)
+				res = 1;
+			if (mtd->planenum > 1) {
+				//printk("\n multiplane block bad check! \n");
+				chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page1);
+				if (chip->read_byte(mtd) != 0xff)
+				res = 1;
+			}
+		}
+
+		/*if (likely(chip->badblockbits == 8))
+			res = bad != 0xFF;
+		else
+			res = hweight8(bad) < chip->badblockbits;*/ //masked dan_multi
+		ofs += mtd->writesize;
+		page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+		i++;
+	} while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE));
+
+	if (getchip)
+		nand_release_device(mtd);
+
+	return res;
+}
+
+/**
+ * nand_default_block_markbad - [DEFAULT] mark a block bad
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ *
+ * This is the default implementation, which can be overridden by a hardware
+ * specific driver. We try operations in the following order, according to our
+ * bbt_options (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH):
+ *  (1) erase the affected block, to allow OOB marker to be written cleanly
+ *  (2) update in-memory BBT
+ *  (3) write bad block marker to OOB area of affected block
+ *  (4) update flash-based BBT
+ * Note that we retain the first error encountered in (3) or (4), finish the
+ * procedures, and dump the error in the end.
+*/
+static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs, int type)
+{
+	struct nand_chip *chip = mtd->priv;
+	uint8_t buf[2] = { 0, 0 };
+	int block, res = 0, ret = 0, i = 0, bits;
+	int write_oob = !(chip->bbt_options & NAND_BBT_NO_OOB_BBM);
+
+	if (write_oob) {
+		struct erase_info einfo;
+
+		/* Attempt erase before marking OOB */
+		memset(&einfo, 0, sizeof(einfo));
+		einfo.mtd = mtd;
+		einfo.addr = ofs;
+		//einfo.len = 1 << chip->phys_erase_shift;
+		einfo.len = mtd->erasesize;
+		nand_erase_nand(mtd, &einfo, 0);
+	}
+
+	/* Get block number */
+	//block = (int)(ofs >> chip->bbt_erase_shift);
+	block = (((int)(ofs >> 10))/mtd->pageSizek) >> chip->pagecnt_shift;
+	/* Mark block bad in memory-based BBT */
+	if (chip->bbt) {
+		if (chip->realplanenum) {
+			if (block == (chip->status_plane[0]/mtd->pagecnt && (chip->status_plane[1]&7))) {
+				if ((0xFF&(mtd->id>>24)) == NAND_MFR_TOSHIBA)
+					bits = ((chip->status_plane[1]&2) ? 1 : 0) + ((chip->status_plane[1]&4) ? 4 : 0);//toshiba
+				else
+					bits = ((chip->status_plane[1]&1) ? 1 : 0) + ((chip->status_plane[1]&2) ? 4 : 0);//others
+				chip->bbt[block >> 1] &= (~(0xF << ((block & 0x01) << 2)));//prevent from mark read fail then mark wort out!
+				chip->bbt[block >> 1] |= bits << ((block & 0x01) << 2);
+			} else {
+				//printk("markbad block=%d diff last err block=%d\n", block, (chip->status_plane[0]/mtd->pagecnt));
+				bits = 5;
+				if (type == 1)
+					bits = 0xa;
+				chip->bbt[block >> 1] |= bits << ((block & 0x01) << 2);
+			}
+		} else {
+				bits = 1;
+				if (type == 1)
+					bits = 0x2;
+			chip->bbt[block >> 2] &= (~(3 << ((block & 0x03) << 1)));//prevent from mark read fail then mark wort out!
+			chip->bbt[block >> 2] |= bits << ((block & 0x03) << 1);
+		}
+	}
+
+	/* Write bad block marker to OOB */
+	if (write_oob) {
+		struct mtd_oob_ops ops;
+		loff_t wr_ofs = ofs;
+
+		nand_get_device(chip, mtd, FL_WRITING);
+
+		ops.datbuf = NULL;
+		ops.oobbuf = buf;
+		ops.ooboffs = chip->badblockpos;
+		if (chip->options & NAND_BUSWIDTH_16) {
+			ops.ooboffs &= ~0x01;
+			ops.len = ops.ooblen = 2;
+		} else {
+			ops.len = ops.ooblen = 1;
+		}
+		ops.mode = MTD_OPS_PLACE_OOB;
+
+		/* Write to first/last page(s) if necessary */
+		if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+			wr_ofs += mtd->erasesize - mtd->writesize;
+		do {
+			res = nand_do_write_oob(mtd, wr_ofs, &ops);
+			if (!ret)
+				ret = res;
+
+			i++;
+			wr_ofs += mtd->writesize;
+		} while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
+
+		nand_release_device(mtd);
+	}
+
+	/* Update flash-based bad block table */
+	if (chip->bbt_options & NAND_BBT_USE_FLASH) {
+		res = nand_update_bbt(mtd, ofs);
+		if (!ret)
+			ret = res;
+	}
+//printk("markbad blk fin res=%d\n",res);
+	if (!ret)
+		mtd->ecc_stats.badblocks++;
+
+	return ret;
+}
+
+/**
+ * nand_check_wp - [GENERIC] check if the chip is write protected
+ * @mtd: MTD device structure
+ *
+ * Check, if the device is write protected. The function expects, that the
+ * device is already selected.
+ */
+static int nand_check_wp(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	/* Broken xD cards report WP despite being writable */
+	if (chip->options & NAND_BROKEN_XD)
+		return 0;
+
+	/* Check the WP bit */
+	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+	return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1;
+}
+
+/**
+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
+ * @allowbbt: 1, if its allowed to access the bbt area
+ *
+ * Check, if the block is bad. Either by reading the bad block table or
+ * calling of the scan function.
+ */
+static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
+			       int allowbbt, int allow_readfail)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (!chip->bbt)
+		return chip->block_bad(mtd, ofs, getchip);
+
+	/* Return info from the table */
+	if (chip->realplanenum)
+		return nand_isbad_bbt_multi(mtd, ofs, allowbbt, allow_readfail);
+	else
+		return nand_isbad_bbt(mtd, ofs, allowbbt, allow_readfail);
+}
+
+/**
+ * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
+ * @mtd: MTD device structure
+ * @timeo: Timeout
+ *
+ * Helper function for nand_wait_ready used when needing to wait in interrupt
+ * context.
+ */
+static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+	struct nand_chip *chip = mtd->priv;
+	int i;
+
+	/* Wait for the device to get ready */
+	for (i = 0; i < timeo; i++) {
+		if (chip->dev_ready(mtd))
+			break;
+		touch_softlockup_watchdog();
+		mdelay(1);
+	}
+}
+
+/* Wait for the ready pin, after a command. The timeout is caught later. */
+void nand_wait_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	unsigned long timeo = jiffies + 2;
+
+	/* 400ms timeout */
+	if (in_interrupt() || oops_in_progress)
+		return panic_nand_wait_ready(mtd, 400);
+
+//	led_trigger_event(nand_led_trigger, LED_FULL);
+	/* Wait until command is processed or timeout occurs */
+	do {
+		if (chip->dev_ready(mtd))
+			break;
+//		touch_softlockup_watchdog();
+	} while (time_before(jiffies, timeo));
+//	led_trigger_event(nand_led_trigger, LED_OFF);
+}
+EXPORT_SYMBOL_GPL(nand_wait_ready);
+
+/**
+ * nand_command - [DEFAULT] Send command to NAND device
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
+ *
+ * Send command to NAND device. This function is used for small page devices
+ * (256/512 Bytes per page).
+ */
+static void nand_command(struct mtd_info *mtd, unsigned int command,
+			 int column, int page_addr)
+{
+	register struct nand_chip *chip = mtd->priv;
+	int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
+
+	/* Write out the command to the device */
+	if (command == NAND_CMD_SEQIN) {
+		int readcmd;
+
+		if (column >= mtd->writesize) {
+			/* OOB area */
+			column -= mtd->writesize;
+			readcmd = NAND_CMD_READOOB;
+		} else if (column < 256) {
+			/* First 256 bytes --> READ0 */
+			readcmd = NAND_CMD_READ0;
+		} else {
+			column -= 256;
+			readcmd = NAND_CMD_READ1;
+		}
+		chip->cmd_ctrl(mtd, readcmd, ctrl);
+		ctrl &= ~NAND_CTRL_CHANGE;
+	}
+	chip->cmd_ctrl(mtd, command, ctrl);
+
+	/* Address cycle, when necessary */
+	ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
+	/* Serially input address */
+	if (column != -1) {
+		/* Adjust columns for 16 bit buswidth */
+		if (chip->options & NAND_BUSWIDTH_16)
+			column >>= 1;
+		chip->cmd_ctrl(mtd, column, ctrl);
+		ctrl &= ~NAND_CTRL_CHANGE;
+	}
+	if (page_addr != -1) {
+		chip->cmd_ctrl(mtd, page_addr, ctrl);
+		ctrl &= ~NAND_CTRL_CHANGE;
+		chip->cmd_ctrl(mtd, page_addr >> 8, ctrl);
+		/* One more address cycle for devices > 32MiB */
+		if (chip->chipsize > (32 << 20))
+			chip->cmd_ctrl(mtd, page_addr >> 16, ctrl);
+	}
+	chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+	/*
+	 * Program and erase have their own busy handlers status and sequential
+	 * in needs no delay
+	 */
+	switch (command) {
+
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_STATUS:
+		return;
+
+	case NAND_CMD_RESET:
+		if (chip->dev_ready)
+			break;
+		udelay(chip->chip_delay);
+		chip->cmd_ctrl(mtd, NAND_CMD_STATUS,
+			       NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+		chip->cmd_ctrl(mtd,
+			       NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+		while (!(chip->read_byte(mtd) & NAND_STATUS_READY))
+				;
+		return;
+
+		/* This applies to read commands */
+	default:
+		/*
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay
+		 */
+		if (!chip->dev_ready) {
+			udelay(chip->chip_delay);
+			return;
+		}
+	}
+	/*
+	 * Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine.
+	 */
+	ndelay(100);
+
+	nand_wait_ready(mtd);
+}
+
+/**
+ * nand_command_lp - [DEFAULT] Send command to NAND large page device
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
+ *
+ * Send command to NAND device. This is the version for the new large page
+ * devices. We don't have the separate regions as we have in the small page
+ * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
+ */
+static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
+			    int column, int page_addr)
+{
+	register struct nand_chip *chip = mtd->priv;
+
+	/* Emulate NAND_CMD_READOOB */
+	if (command == NAND_CMD_READOOB) {
+		column += mtd->writesize;
+		command = NAND_CMD_READ0;
+	}
+
+	/* Command latch cycle */
+	chip->cmd_ctrl(mtd, command & 0xff,
+		       NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+
+	if (column != -1 || page_addr != -1) {
+		int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE;
+
+		/* Serially input address */
+		if (column != -1) {
+			/* Adjust columns for 16 bit buswidth */
+			if (chip->options & NAND_BUSWIDTH_16)
+				column >>= 1;
+			chip->cmd_ctrl(mtd, column, ctrl);
+			ctrl &= ~NAND_CTRL_CHANGE;
+			chip->cmd_ctrl(mtd, column >> 8, ctrl);
+		}
+		if (page_addr != -1) {
+			chip->cmd_ctrl(mtd, page_addr, ctrl);
+			chip->cmd_ctrl(mtd, page_addr >> 8,
+				       NAND_NCE | NAND_ALE);
+			/* One more address cycle for devices > 128MiB */
+			if (chip->chipsize > (128 << 20))
+				chip->cmd_ctrl(mtd, page_addr >> 16,
+					       NAND_NCE | NAND_ALE);
+		}
+	}
+	chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+	/*
+	 * Program and erase have their own busy handlers status, sequential
+	 * in, and deplete1 need no delay.
+	 */
+	switch (command) {
+
+	case NAND_CMD_CACHEDPROG:
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_RNDIN:
+	case NAND_CMD_STATUS:
+	case NAND_CMD_DEPLETE1:
+		return;
+
+	case NAND_CMD_STATUS_ERROR:
+	case NAND_CMD_STATUS_ERROR0:
+	case NAND_CMD_STATUS_ERROR1:
+	case NAND_CMD_STATUS_ERROR2:
+	case NAND_CMD_STATUS_ERROR3:
+		/* Read error status commands require only a short delay */
+		udelay(chip->chip_delay);
+		return;
+
+	case NAND_CMD_RESET:
+		if (chip->dev_ready)
+			break;
+		udelay(chip->chip_delay);
+		chip->cmd_ctrl(mtd, NAND_CMD_STATUS,
+			       NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+		chip->cmd_ctrl(mtd, NAND_CMD_NONE,
+			       NAND_NCE | NAND_CTRL_CHANGE);
+		while (!(chip->read_byte(mtd) & NAND_STATUS_READY))
+				;
+		return;
+
+	case NAND_CMD_RNDOUT:
+		/* No ready / busy check necessary */
+		chip->cmd_ctrl(mtd, NAND_CMD_RNDOUTSTART,
+			       NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+		chip->cmd_ctrl(mtd, NAND_CMD_NONE,
+			       NAND_NCE | NAND_CTRL_CHANGE);
+		return;
+
+	case NAND_CMD_READ0:
+		chip->cmd_ctrl(mtd, NAND_CMD_READSTART,
+			       NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+		chip->cmd_ctrl(mtd, NAND_CMD_NONE,
+			       NAND_NCE | NAND_CTRL_CHANGE);
+
+		/* This applies to read commands */
+	default:
+		/*
+		 * If we don't have access to the busy pin, we apply the given
+		 * command delay.
+		 */
+		if (!chip->dev_ready) {
+			udelay(chip->chip_delay);
+			return;
+		}
+	}
+
+	/*
+	 * Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine.
+	 */
+	ndelay(100);
+
+	nand_wait_ready(mtd);
+}
+
+/**
+ * panic_nand_get_device - [GENERIC] Get chip for selected access
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
+ *
+ * Used when in panic, no locks are taken.
+ */
+static void panic_nand_get_device(struct nand_chip *chip,
+		      struct mtd_info *mtd, int new_state)
+{
+	/* Hardware controller shared among independent devices */
+	chip->controller->active = chip;
+	chip->state = new_state;
+}
+
+/**
+ * nand_get_device - [GENERIC] Get chip for selected access
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
+ *
+ * Get the device and lock it for exclusive access
+ */
+static int
+nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
+{
+	spinlock_t *lock = &chip->controller->lock;
+	wait_queue_head_t *wq = &chip->controller->wq;
+	DECLARE_WAITQUEUE(wait, current);
+	auto_pll_divisor(DEV_NAND, CLK_ENABLE, 0, 0);
+retry:
+	spin_lock(lock);
+
+	/* Hardware controller shared among independent devices */
+	if (!chip->controller->active)
+		chip->controller->active = chip;
+
+	if (chip->controller->active == chip && chip->state == FL_READY) {
+		chip->state = new_state;
+		spin_unlock(lock);
+		return 0;
+	}
+	if (new_state == FL_PM_SUSPENDED) {
+		if (chip->controller->active->state == FL_PM_SUSPENDED) {
+			chip->state = FL_PM_SUSPENDED;
+			spin_unlock(lock);
+			return 0;
+		}
+	}
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	add_wait_queue(wq, &wait);
+	spin_unlock(lock);
+	schedule();
+	remove_wait_queue(wq, &wait);
+	goto retry;
+}
+
+/**
+ * panic_nand_wait - [GENERIC] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
+ * @timeo: timeout
+ *
+ * Wait for command done. This is a helper function for nand_wait used when
+ * we are in interrupt context. May happen when in panic and trying to write
+ * an oops through mtdoops.
+ */
+static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
+			    unsigned long timeo)
+{
+	int i;
+	for (i = 0; i < timeo; i++) {
+		if (chip->dev_ready) {
+			if (chip->dev_ready(mtd))
+				break;
+		} else {
+			if (chip->read_byte(mtd) & NAND_STATUS_READY)
+				break;
+		}
+		mdelay(1);
+	}
+}
+
+/**
+ * nand_wait - [DEFAULT] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
+ *
+ * Wait for command done. This applies to erase and program only. Erase can
+ * take up to 400ms and program up to 20ms according to general NAND and
+ * SmartMedia specs.
+ */
+static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+
+	unsigned long timeo = jiffies;
+	int status, state = chip->state;
+
+	if (state == FL_ERASING)
+		timeo += (HZ * 400) / 1000;
+	else
+		timeo += (HZ * 20) / 1000;
+
+//	led_trigger_event(nand_led_trigger, LED_FULL);
+
+	/*
+	 * Apply this short delay always to ensure that we do wait tWB in any
+	 * case on any machine.
+	 */
+	ndelay(100);
+
+	if ((state == FL_ERASING || state == FL_WRITING) &&
+	((chip->options & NAND_IS_AND) || chip->realplanenum)) {
+		/*if (state == FL_ERASING)
+			printk("read status multi erase\n");
+		if (state == FL_WRITING)
+			printk("read status multi write\n");*/
+			//printk("read status multi write id=0x%x\n", 0xFF&(mtd->id>>24));
+		if ((0xFF&(mtd->id>>24)) == NAND_MFR_HYNIX || (0xFF&(mtd->id>>24)) == NAND_MFR_MICRON || (0xFF&(mtd->id>>24)) == NAND_MFR_INTEL) {
+			chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+		} else
+			chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
+	} else
+		chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+
+	if (in_interrupt() || oops_in_progress)
+		panic_nand_wait(mtd, chip, timeo);
+	else {
+		while (time_before(jiffies, timeo)) {
+			if (chip->dev_ready) {
+				if (chip->dev_ready(mtd))
+					break;
+			} else {
+				if (chip->read_byte(mtd) & NAND_STATUS_READY)
+					break;
+			}
+			cond_resched();
+		}
+	}
+//	led_trigger_event(nand_led_trigger, LED_OFF);
+
+	status = (int)chip->read_byte(mtd);
+	/*if ((0xFF&(mtd->id>>24)) == 0xAD && chip->realplanenum)
+	while (status&0x1 || !(status&0x40)) {
+			chip->cmdfunc(mtd, 0x75, -1, -1);
+			status = (int)chip->read_byte(mtd);
+			printk("read status 75 multi=%x\n", status);
+			if (status&0x40)
+				break;
+		}*/
+	return status;
+}
+
+/**
+ * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
+ * @invert: when = 0, unlock the range of blocks within the lower and
+ *                    upper boundary address
+ *          when = 1, unlock the range of blocks outside the boundaries
+ *                    of the lower and upper boundary address
+ *
+ * Returs unlock status.
+ */
+static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
+					uint64_t len, int invert)
+{
+	int ret = 0;
+	int status, page;
+	struct nand_chip *chip = mtd->priv;
+
+	/* Submit address of first page to unlock */
+	page = ofs >> chip->page_shift;
+	chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
+
+	/* Submit address of last page to unlock */
+	page = (ofs + len) >> chip->page_shift;
+	chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1,
+				(page | invert) & chip->pagemask);
+
+	/* Call wait ready function */
+	status = chip->waitfunc(mtd, chip);
+	/* See if device thinks it succeeded */
+	if (status & 0x01) {
+		pr_debug("%s: error status = 0x%08x\n",
+					__func__, status);
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+/**
+ * nand_unlock - [REPLACEABLE] unlocks specified locked blocks
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
+ *
+ * Returns unlock status.
+ */
+int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	int ret = 0;
+	int chipnr;
+	struct nand_chip *chip = mtd->priv;
+
+	pr_debug("%s: start = 0x%012llx, len = %llu\n",
+			__func__, (unsigned long long)ofs, len);
+
+	if (check_offs_len(mtd, ofs, len))
+		ret = -EINVAL;
+
+	/* Align to last block address if size addresses end of the device */
+	if (ofs + len == mtd->size)
+		len -= mtd->erasesize;
+
+	nand_get_device(chip, mtd, FL_UNLOCKING);
+
+	/* Shift to get chip number */
+	//chipnr = ofs >> chip->chip_shift;
+	chipnr = ((int)(ofs >> (10+chip->pagecnt_shift)))/(mtd->pageSizek*mtd->blkcnt);
+
+	chip->select_chip(mtd, chipnr);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd)) {
+		pr_debug("%s: device is write protected!\n",
+					__func__);
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = __nand_unlock(mtd, ofs, len, 0);
+
+out:
+	nand_release_device(mtd);
+
+	return ret;
+}
+EXPORT_SYMBOL(nand_unlock);
+
+/**
+ * nand_lock - [REPLACEABLE] locks all blocks present in the device
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
+ *
+ * This feature is not supported in many NAND parts. 'Micron' NAND parts do
+ * have this feature, but it allows only to lock all blocks, not for specified
+ * range for block. Implementing 'lock' feature by making use of 'unlock', for
+ * now.
+ *
+ * Returns lock status.
+ */
+int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	int ret = 0;
+	int chipnr, status, page;
+	struct nand_chip *chip = mtd->priv;
+
+	pr_debug("%s: start = 0x%012llx, len = %llu\n",
+			__func__, (unsigned long long)ofs, len);
+
+	if (check_offs_len(mtd, ofs, len))
+		ret = -EINVAL;
+
+	nand_get_device(chip, mtd, FL_LOCKING);
+
+	/* Shift to get chip number */
+	//chipnr = ofs >> chip->chip_shift;
+	chipnr = ((int)(ofs >> (10+chip->pagecnt_shift)))/(mtd->pageSizek*mtd->blkcnt);
+
+	chip->select_chip(mtd, chipnr);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd)) {
+		pr_debug("%s: device is write protected!\n",
+					__func__);
+		status = MTD_ERASE_FAILED;
+		ret = -EIO;
+		goto out;
+	}
+
+	/* Submit address of first page to lock */
+	page = ofs >> chip->page_shift;
+	chip->cmdfunc(mtd, NAND_CMD_LOCK, -1, page & chip->pagemask);
+
+	/* Call wait ready function */
+	status = chip->waitfunc(mtd, chip);
+	/* See if device thinks it succeeded */
+	if (status & 0x01) {
+		pr_debug("%s: error status = 0x%08x\n",
+					__func__, status);
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = __nand_unlock(mtd, ofs, len, 0x1);
+
+out:
+	nand_release_device(mtd);
+
+	return ret;
+}
+EXPORT_SYMBOL(nand_lock);
+
+/**
+ * nand_read_page_raw - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
+ *
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
+ */
+static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+			      uint8_t *buf, int page)
+{
+	chip->read_buf(mtd, buf, mtd->writesize);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	return 0;
+}
+
+/**
+ * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
+ *
+ * We need a special oob layout and handling even when OOB isn't used.
+ */
+static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
+					struct nand_chip *chip,
+					uint8_t *buf, int page)
+{
+	int eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	uint8_t *oob = chip->oob_poi;
+	int steps, size;
+
+	for (steps = chip->ecc.steps; steps > 0; steps--) {
+		chip->read_buf(mtd, buf, eccsize);
+		buf += eccsize;
+
+		if (chip->ecc.prepad) {
+			chip->read_buf(mtd, oob, chip->ecc.prepad);
+			oob += chip->ecc.prepad;
+		}
+
+		chip->read_buf(mtd, oob, eccbytes);
+		oob += eccbytes;
+
+		if (chip->ecc.postpad) {
+			chip->read_buf(mtd, oob, chip->ecc.postpad);
+			oob += chip->ecc.postpad;
+		}
+	}
+
+	size = mtd->oobsize - (oob - chip->oob_poi);
+	if (size)
+		chip->read_buf(mtd, oob, size);
+
+	return 0;
+}
+
+/**
+ * nand_read_page_swecc - [REPLACEABLE] software ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
+ */
+static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+				uint8_t *buf, int page)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *p = buf;
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	uint8_t *ecc_code = chip->buffers->ecccode;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+	chip->ecc.read_page_raw(mtd, chip, buf, page);
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+	for (i = 0; i < chip->ecc.total; i++)
+		ecc_code[i] = chip->oob_poi[eccpos[i]];
+
+	eccsteps = chip->ecc.steps;
+	p = buf;
+
+	for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+		int stat;
+
+		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+		if (stat < 0)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+	}
+	return 0;
+}
+
+/**
+ * nand_read_subpage - [REPLACEABLE] software ECC based sub-page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @data_offs: offset of requested data within the page
+ * @readlen: data length
+ * @bufpoi: buffer to store read data
+ */
+static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+			uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+{
+	int start_step, end_step, num_steps;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	uint8_t *p;
+	int data_col_addr, i, gaps = 0;
+	int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
+	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+	int index = 0;
+printk(KERN_NOTICE "r nand_read_subpage -------------------------\n");
+	/* Column address within the page aligned to ECC size (256bytes) */
+	start_step = data_offs / chip->ecc.size;
+	end_step = (data_offs + readlen - 1) / chip->ecc.size;
+	num_steps = end_step - start_step + 1;
+
+	/* Data size aligned to ECC ecc.size */
+	datafrag_len = num_steps * chip->ecc.size;
+	eccfrag_len = num_steps * chip->ecc.bytes;
+
+	data_col_addr = start_step * chip->ecc.size;
+	/* If we read not a page aligned data */
+	if (data_col_addr != 0)
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
+
+	p = bufpoi + data_col_addr;
+	chip->read_buf(mtd, p, datafrag_len);
+
+	/* Calculate ECC */
+	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
+		chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
+
+	/*
+	 * The performance is faster if we position offsets according to
+	 * ecc.pos. Let's make sure that there are no gaps in ECC positions.
+	 */
+	for (i = 0; i < eccfrag_len - 1; i++) {
+		if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
+			eccpos[i + start_step * chip->ecc.bytes + 1]) {
+			gaps = 1;
+			break;
+		}
+	}
+	if (gaps) {
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	} else {
+		/*
+		 * Send the command to read the particular ECC bytes take care
+		 * about buswidth alignment in read_buf.
+		 */
+		index = start_step * chip->ecc.bytes;
+
+		aligned_pos = eccpos[index] & ~(busw - 1);
+		aligned_len = eccfrag_len;
+		if (eccpos[index] & (busw - 1))
+			aligned_len++;
+		if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1))
+			aligned_len++;
+
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+					mtd->writesize + aligned_pos, -1);
+		chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
+	}
+
+	for (i = 0; i < eccfrag_len; i++)
+		chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]];
+
+	p = bufpoi + data_col_addr;
+	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
+		int stat;
+
+		stat = chip->ecc.correct(mtd, p,
+			&chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+		if (stat < 0)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+	}
+	return 0;
+}
+
+/**
+ * nand_read_page_hwecc - [REPLACEABLE] hardware ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
+ *
+ * Not for syndrome calculating ECC controllers which need a special oob layout.
+ */
+static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+				uint8_t *buf, int page)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *p = buf;
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	uint8_t *ecc_code = chip->buffers->ecccode;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+		chip->ecc.hwctl(mtd, NAND_ECC_READ);
+		chip->read_buf(mtd, p, eccsize);
+		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+	}
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	for (i = 0; i < chip->ecc.total; i++)
+		ecc_code[i] = chip->oob_poi[eccpos[i]];
+
+	eccsteps = chip->ecc.steps;
+	p = buf;
+
+	for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+		int stat;
+
+		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+		if (stat < 0)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+	}
+	return 0;
+}
+
+/**
+ * nand_read_page_hwecc_oob_first - [REPLACEABLE] hw ecc, read oob first
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
+ *
+ * Hardware ECC for large page chips, require OOB to be read first. For this
+ * ECC mode, the write_page method is re-used from ECC_HW. These methods
+ * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with
+ * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from
+ * the data area, by overwriting the NAND manufacturer bad block markings.
+ */
+static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+	struct nand_chip *chip, uint8_t *buf, int page)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *p = buf;
+	uint8_t *ecc_code = chip->buffers->ecccode;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+
+	/* Read the OOB area first */
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+	for (i = 0; i < chip->ecc.total; i++)
+		ecc_code[i] = chip->oob_poi[eccpos[i]];
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+		int stat;
+
+		chip->ecc.hwctl(mtd, NAND_ECC_READ);
+		chip->read_buf(mtd, p, eccsize);
+		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+		stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
+		if (stat < 0)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+	}
+	return 0;
+}
+
+/**
+ * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
+ *
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
+ */
+static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+				   uint8_t *buf, int page)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *p = buf;
+	uint8_t *oob = chip->oob_poi;
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+		int stat;
+
+		chip->ecc.hwctl(mtd, NAND_ECC_READ);
+		chip->read_buf(mtd, p, eccsize);
+
+		if (chip->ecc.prepad) {
+			chip->read_buf(mtd, oob, chip->ecc.prepad);
+			oob += chip->ecc.prepad;
+		}
+
+		chip->ecc.hwctl(mtd, NAND_ECC_READSYN);
+		chip->read_buf(mtd, oob, eccbytes);
+		stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+		if (stat < 0)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+
+		oob += eccbytes;
+
+		if (chip->ecc.postpad) {
+			chip->read_buf(mtd, oob, chip->ecc.postpad);
+			oob += chip->ecc.postpad;
+		}
+	}
+
+	/* Calculate remaining oob bytes */
+	i = mtd->oobsize - (oob - chip->oob_poi);
+	if (i)
+		chip->read_buf(mtd, oob, i);
+
+	return 0;
+}
+
+/**
+ * nand_transfer_oob - [INTERN] Transfer oob to client buffer
+ * @chip: nand chip structure
+ * @oob: oob destination address
+ * @ops: oob ops structure
+ * @len: size of oob to transfer
+ */
+static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
+				  struct mtd_oob_ops *ops, size_t len)
+{
+	switch (ops->mode) {
+
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_RAW:
+		memcpy(oob, chip->oob_poi + ops->ooboffs, len);
+		return oob + len;
+
+	case MTD_OPS_AUTO_OOB: {
+		struct nand_oobfree *free = chip->ecc.layout->oobfree;
+		uint32_t boffs = 0, roffs = ops->ooboffs;
+		size_t bytes = 0;
+
+		for (; free->length && len; free++, len -= bytes) {
+			/* Read request not from offset 0? */
+			if (unlikely(roffs)) {
+				if (roffs >= free->length) {
+					roffs -= free->length;
+					continue;
+				}
+				boffs = free->offset + roffs;
+				bytes = min_t(size_t, len,
+					      (free->length - roffs));
+				roffs = 0;
+			} else {
+				bytes = min_t(size_t, len, free->length);
+				boffs = free->offset;
+			}
+			memcpy(oob, chip->oob_poi + boffs, bytes);
+			oob += bytes;
+		}
+		return oob;
+	}
+	default:
+		BUG();
+	}
+	return NULL;
+}
+
+/**
+ * nand_do_read_ops - [INTERN] Read data with ECC
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob ops structure
+ *
+ * Internal function. Called with chip held.
+ */
+static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
+			    struct mtd_oob_ops *ops)
+{
+	int chipnr, page, realpage, col, bytes, aligned;
+	struct nand_chip *chip = mtd->priv;
+	struct mtd_ecc_stats stats;
+	//int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+	int blkcheck = mtd->pagecnt -1;
+	int sndcmd = 1;
+	int ret = 0, nocache = 1;
+	uint32_t readlen = ops->len;
+	uint32_t oobreadlen = ops->ooblen;
+	uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
+		mtd->oobavail : mtd->oobsize;
+
+	uint8_t *bufpoi, *oob, *buf;
+
+	stats = mtd->ecc_stats;
+	mtd->ecc_err_cnt = 0;
+
+	//chipnr = (int)(from >> chip->chip_shift);
+	chipnr = ((int)(from >> (10+chip->pagecnt_shift)))/(mtd->pageSizek*mtd->blkcnt);
+	chip->select_chip(mtd, chipnr);
+	if(chipnr > 0) {
+		second_chip = 1;
+	} else {
+		second_chip = 0;
+	}
+	//realpage = (int)(from >> chip->page_shift);
+	realpage = ((int)(from >> 10))/mtd->pageSizek;
+	page = realpage & chip->pagemask;
+
+	if ((mtd->pageSizek >> (ffs(mtd->pageSizek)-1)) == 1) {
+		col = (int)(from & (mtd->writesize - 1));
+	} else {
+		col = ((int)(from>>10)) % mtd->pageSizek;
+		col = col << 10;
+	}
+	//printk("chip=%d realpage=0x%x page=0x%x mask=0x%x col=0x%x \n",chipnr, realpage, page, chip->pagemask, col);
+
+	buf = ops->datbuf;
+	oob = ops->oobbuf;
+
+	while (1) {
+		nocache = 1;
+		bytes = min(mtd->writesize - col, readlen);
+		aligned = (bytes == mtd->writesize);
+		//if (!aligned || col)
+//printk("readlen=%d byte=%d align=%d col=%d\n", readlen, bytes, aligned, col);
+		/* Is the current page in the buffer? */
+		if (realpage != chip->pagebuf || oob) {
+			bufpoi = aligned ? buf : chip->buffers->databuf;
+
+			if (likely(sndcmd)) {
+				if (!chip->realplanenum) {//dan_multi
+						/*page = (page / pagecnt) * pagecnt + page;//dan_multi 65->129, 129->257
+					else*/
+					if (aligned)
+						nocache = cache_read_data(mtd, chip, page, buf);
+					if (nocache)
+						chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+				}
+				sndcmd = 0;
+			}
+
+			/* Now read the page into the buffer */
+			/*if (unlikely(ops->mode == MTD_OPS_RAW))
+				ret = chip->ecc.read_page_raw(mtd, chip,
+							      bufpoi, page);
+			else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
+				ret = chip->ecc.read_subpage(mtd, chip,
+							col, bytes, bufpoi);
+			else*/
+			/* dannier comment: copy data + oob to bufpoi */
+			if (!chip->realplanenum && nocache == 0)
+				ret = 0;
+			else
+				ret = chip->ecc.read_page(mtd, chip, bufpoi,
+							  page);
+			if (ret < 0) {
+				if (!aligned)
+					/* Invalidate page cache */
+					chip->pagebuf = -1;
+				break;
+			}
+
+			/* Transfer not aligned data */
+			if (!aligned) {
+				if (!NAND_SUBPAGE_READ(chip) && !oob &&
+				    !(mtd->ecc_stats.failed - stats.failed) &&
+				    (ops->mode != MTD_OPS_RAW))
+					chip->pagebuf = realpage;
+				else
+					/* Invalidate page cache */
+					chip->pagebuf = -1;
+				memcpy(buf, chip->buffers->databuf + col, bytes);
+			}
+
+			buf += bytes;
+
+			if (unlikely(oob)) {
+
+				int toread = min(oobreadlen, max_oobsize);
+
+				if (toread) {
+					oob = nand_transfer_oob(chip,
+						oob, ops, toread);
+					oobreadlen -= toread;
+				}
+			}
+
+			if (!(chip->options & NAND_NO_READRDY)) {
+				/*
+				 * Apply delay or wait for ready/busy pin. Do
+				 * this before the AUTOINCR check, so no
+				 * problems arise if a chip which does auto
+				 * increment is marked as NOAUTOINCR by the
+				 * board driver.
+				 */
+				if (!chip->dev_ready)
+					udelay(chip->chip_delay);
+				else
+					nand_wait_ready(mtd);
+			}
+		} else {
+			memcpy(buf, chip->buffers->databuf + col, bytes);
+			buf += bytes;
+		}
+
+		readlen -= bytes;
+
+		if (!readlen)
+			break;
+
+		/* For subsequent reads align to page boundary */
+		col = 0;
+		/* Increment page address */
+		realpage++;
+
+		page = realpage & chip->pagemask;
+		/* Check, if we cross a chip boundary */
+		if (!page) {
+			chipnr++;
+			chip->select_chip(mtd, -1);
+			chip->select_chip(mtd, chipnr);
+		}
+
+		/*
+		 * Check, if the chip supports auto page increment or if we
+		 * have hit a block boundary.
+		 */
+		if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
+			sndcmd = 1;
+	}
+
+	ops->retlen = ops->len - (size_t) readlen;
+	if (oob)
+		ops->oobretlen = ops->ooblen - oobreadlen;
+
+	if (ret)
+		return ret;
+
+	if (mtd->ecc_stats.failed - stats.failed)
+		return -EBADMSG;
+
+	if (mtd->ecc_err_cnt > mtd->ecc_err_level) {
+		return -NEED_REPLACEMENT;
+	}
+
+	return  mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+}
+
+static int nand_block_markbad_wmt(struct mtd_info *mtd, loff_t ofs, int type);
+
+
+/**
+ * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put data
+ *
+ * Get hold of the chip and call nand_do_read.
+ */
+static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
+		     size_t *retlen, uint8_t *buf)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct mtd_oob_ops ops;
+	int ret;
+
+	nand_get_device(chip, mtd, FL_READING);
+	ops.len = len;
+	ops.datbuf = buf;
+	ops.oobbuf = NULL;
+	ops.mode = 0;
+	ret = nand_do_read_ops(mtd, from, &ops);
+	*retlen = ops.retlen;
+	nand_release_device(mtd);
+
+	if (ret == -EBADMSG) {
+		nand_block_markbad_wmt(mtd, from, 1);
+	}
+
+	return ret;
+}
+
+/**
+ * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
+ */
+static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
+			     int page, int sndcmd)
+{
+	if (sndcmd) {
+		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+		sndcmd = 0;
+	}
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	return sndcmd;
+}
+
+/**
+ * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC
+ *			    with syndromes
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ * @sndcmd: flag whether to issue read command or not
+ */
+static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+				  int page, int sndcmd)
+{
+	uint8_t *buf = chip->oob_poi;
+	int length = mtd->oobsize;
+	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+	int eccsize = chip->ecc.size;
+	uint8_t *bufpoi = buf;
+	int i, toread, sndrnd = 0, pos;
+
+	chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page);
+	for (i = 0; i < chip->ecc.steps; i++) {
+		if (sndrnd) {
+			pos = eccsize + i * (eccsize + chunk);
+			if (mtd->writesize > 512)
+				chip->cmdfunc(mtd, NAND_CMD_RNDOUT, pos, -1);
+			else
+				chip->cmdfunc(mtd, NAND_CMD_READ0, pos, page);
+		} else
+			sndrnd = 1;
+		toread = min_t(int, length, chunk);
+		chip->read_buf(mtd, bufpoi, toread);
+		bufpoi += toread;
+		length -= toread;
+	}
+	if (length > 0)
+		chip->read_buf(mtd, bufpoi, length);
+
+	return 1;
+}
+
+/**
+ * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
+ */
+static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
+			      int page)
+{
+	int status = 0;
+	const uint8_t *buf = chip->oob_poi;
+	int length = mtd->oobsize;
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+	chip->write_buf(mtd, buf, length);
+	/* Send command to program the OOB data */
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+	status = chip->waitfunc(mtd, chip);
+
+	return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/**
+ * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC
+ *			     with syndrome - only for large page flash
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
+ */
+static int nand_write_oob_syndrome(struct mtd_info *mtd,
+				   struct nand_chip *chip, int page)
+{
+	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+	int eccsize = chip->ecc.size, length = mtd->oobsize;
+	int i, len, pos, status = 0, sndcmd = 0, steps = chip->ecc.steps;
+	const uint8_t *bufpoi = chip->oob_poi;
+
+	/*
+	 * data-ecc-data-ecc ... ecc-oob
+	 * or
+	 * data-pad-ecc-pad-data-pad .... ecc-pad-oob
+	 */
+	if (!chip->ecc.prepad && !chip->ecc.postpad) {
+		pos = steps * (eccsize + chunk);
+		steps = 0;
+	} else
+		pos = eccsize;
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
+	for (i = 0; i < steps; i++) {
+		if (sndcmd) {
+			if (mtd->writesize <= 512) {
+				uint32_t fill = 0xFFFFFFFF;
+
+				len = eccsize;
+				while (len > 0) {
+					int num = min_t(int, len, 4);
+					chip->write_buf(mtd, (uint8_t *)&fill,
+							num);
+					len -= num;
+				}
+			} else {
+				pos = eccsize + i * (eccsize + chunk);
+				chip->cmdfunc(mtd, NAND_CMD_RNDIN, pos, -1);
+			}
+		} else
+			sndcmd = 1;
+		len = min_t(int, length, chunk);
+		chip->write_buf(mtd, bufpoi, len);
+		bufpoi += len;
+		length -= len;
+	}
+	if (length > 0)
+		chip->write_buf(mtd, bufpoi, length);
+
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+	status = chip->waitfunc(mtd, chip);
+
+	return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+
+/**
+ * nand_do_read_bb_oob - [Intern] NAND read out-of-band
+ * @mtd:	MTD device structure
+ * @from:	offset to read from
+ * @ops:	oob operations description structure
+ *
+ * NAND read out-of-band data from the spare area
+ */
+static int nand_do_read_bb_oob(struct mtd_info *mtd, loff_t from,
+			    struct mtd_oob_ops *ops)
+{
+	int page, realpage, chipnr, sndcmd = 1;
+	struct nand_chip *chip = mtd->priv;
+	struct mtd_ecc_stats stats;
+	int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+	int readlen = ops->ooblen;
+	int len;
+	uint8_t *buf = ops->oobbuf;
+
+	pr_debug("%s: from = 0x%08Lx, len = %i\n",
+			__func__, (unsigned long long)from, readlen);
+
+	stats = mtd->ecc_stats;
+	len = mtd->oobsize;
+
+	if (unlikely(ops->ooboffs >= len)) {
+		pr_debug("%s: attempt to start read outside oob\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	/* Do not allow reads past end of device */
+	if (unlikely(from >= mtd->size ||
+		     ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
+					(from >> chip->page_shift)) * len)) {
+		pr_debug("%s: attempt to read beyond end of device\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	//chipnr = (int)(from >> chip->chip_shift);
+	chipnr = ((int)(from >> (10+chip->pagecnt_shift)))/(mtd->pageSizek*mtd->blkcnt);
+	chip->select_chip(mtd, chipnr);
+
+	/* Shift to get page */
+	//realpage = (int)(from >> chip->page_shift);
+	realpage = ((int)(from >> 10))/mtd->pageSizek;
+	page = realpage & chip->pagemask;
+
+	while(1) {
+		sndcmd = chip->ecc.read_bb_oob(mtd, chip, page, sndcmd);
+
+		len = min(len, readlen);
+		if (((mtd->id>>24)&0xff) == 0x45) {
+			memcpy(buf, chip->oob_poi - mtd->writesize, 1024);
+			len = min((int)mtd->oobsize, readlen);
+		} else
+			buf = nand_transfer_oob(chip, buf, ops, len);
+
+		if (!(chip->options & NAND_NO_READRDY)) {
+			/*
+			 * Apply delay or wait for ready/busy pin. Do this
+			 * before the AUTOINCR check, so no problems arise if a
+			 * chip which does auto increment is marked as
+			 * NOAUTOINCR by the board driver.
+			 */
+			if (!chip->dev_ready)
+				udelay(chip->chip_delay);
+			else
+				nand_wait_ready(mtd);
+		}
+
+		readlen -= len;
+		if (!readlen)
+			break;
+
+		/* Increment page address */
+		realpage++;
+
+		page = realpage & chip->pagemask;
+		/* Check, if we cross a chip boundary */
+		if (!page) {
+			chipnr++;
+			chip->select_chip(mtd, -1);
+			chip->select_chip(mtd, chipnr);
+		}
+
+		/* Check, if the chip supports auto page increment
+		 * or if we have hit a block boundary.
+		 */
+		if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
+			sndcmd = 1;
+	}
+
+	ops->oobretlen = ops->ooblen;
+	
+	if (mtd->ecc_stats.failed - stats.failed)
+		return -EBADMSG;
+
+	return  mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+}
+/**
+ * nand_do_read_oob - [INTERN] NAND read out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operations description structure
+ *
+ * NAND read out-of-band data from the spare area.
+ */
+static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
+			    struct mtd_oob_ops *ops)
+{
+	int page, realpage, chipnr, sndcmd = 1;
+	struct nand_chip *chip = mtd->priv;
+	struct mtd_ecc_stats stats;
+	int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+	int readlen = ops->ooblen;
+	int len;
+	uint8_t *buf = ops->oobbuf, *buf1;
+	
+	mtd->ecc_err_cnt = 0;
+
+	pr_debug("%s: from = 0x%08Lx, len = %i\n",
+			__func__, (unsigned long long)from, readlen);
+
+	stats = mtd->ecc_stats;
+
+	if (ops->mode == MTD_OPS_AUTO_OOB)
+		len = chip->ecc.layout->oobavail;
+	else
+		len = mtd->oobsize;
+
+	if (unlikely(ops->ooboffs >= len)) {
+		pr_debug("%s: attempt to start read outside oob\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	/* Do not allow reads past end of device */
+	if (unlikely(from >= mtd->size ||
+		     ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
+					(from >> chip->page_shift)) * len)) {
+		pr_debug("%s: attempt to read beyond end of device\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	//chipnr = (int)(from >> chip->chip_shift);
+	chipnr = ((int)(from >> (10+chip->pagecnt_shift)))/(mtd->pageSizek*mtd->blkcnt);
+	chip->select_chip(mtd, chipnr);
+
+	/* Shift to get page */
+	//realpage = (int)(from >> chip->page_shift);
+	realpage = ((int)(from >> 10))/mtd->pageSizek;
+	page = realpage & chip->pagemask;
+	if(chipnr > 0) {
+		second_chip = 1;
+	} else {
+		second_chip = 0;
+	}
+	buf1 = buf;
+	while (1) {
+		if (ops->mode == MTD_OPS_RAW)
+			sndcmd = chip->ecc.read_oob_raw(mtd, chip, page, sndcmd);
+		else
+			sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
+
+		len = min(len, readlen);
+		buf = nand_transfer_oob(chip, buf, ops, len);
+
+		if (!(chip->options & NAND_NO_READRDY)) {
+			/*
+			 * Apply delay or wait for ready/busy pin. Do this
+			 * before the AUTOINCR check, so no problems arise if a
+			 * chip which does auto increment is marked as
+			 * NOAUTOINCR by the board driver.
+			 */
+			if (!chip->dev_ready)
+				udelay(chip->chip_delay);
+			else
+				nand_wait_ready(mtd);
+		}
+
+		readlen -= len;
+		if (!readlen)
+			break;
+
+		/* Increment page address */
+		realpage++;
+
+		page = realpage & chip->pagemask;
+		/* Check, if we cross a chip boundary */
+		if (!page) {
+			chipnr++;
+			chip->select_chip(mtd, -1);
+			chip->select_chip(mtd, chipnr);
+		}
+
+		/*
+		 * Check, if the chip supports auto page increment or if we
+		 * have hit a block boundary.
+		 */
+		if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
+			sndcmd = 1;
+	}
+
+	ops->oobretlen = ops->ooblen;
+
+	if (mtd->ecc_stats.failed - stats.failed)
+		return -EBADMSG;
+
+	if (mtd->ecc_err_cnt > mtd->ecc_err_level) {
+		return -NEED_REPLACEMENT;
+	}
+	return  mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+}
+
+/**
+ * nand_read_oob - [MTD Interface] NAND read data and/or out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
+ *
+ * NAND read data and/or out-of-band data.
+ */
+static int nand_read_oob(struct mtd_info *mtd, loff_t from,
+			 struct mtd_oob_ops *ops)
+{
+	struct nand_chip *chip = mtd->priv;
+	int ret = -ENOTSUPP;
+
+	ops->retlen = 0;
+
+	/* Do not allow reads past end of device */
+	if (ops->datbuf && (from + ops->len) > mtd->size) {
+		pr_debug("%s: attempt to read beyond end of device\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	nand_get_device(chip, mtd, FL_READING);
+
+	switch (ops->mode) {
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
+	case MTD_OPS_RAW:
+		break;
+
+	default:
+		goto out;
+	}
+
+	if (!ops->datbuf) {
+		/* DannierChen20101022 : Patch for avoiding yaffs2 read checkpoint signature from a bad block*/
+		if (chip->bbt && nand_block_checkbad(mtd, from, 1, 0xFF, 1)) {
+				memset(ops->oobbuf, 0xff, ops->ooblen);
+				//printk("nand_do_read_oob: memset ops->ooblen=%d Byte\n", ops->ooblen);
+			/* DannierChen20101022 : Patch end */
+		} else {
+			ret = nand_do_read_oob(mtd, from, ops);
+			if (ret == -EBADMSG) {
+				nand_release_device(mtd);
+				nand_block_markbad_wmt(mtd, from, 1);
+				return ret;
+			}
+		}
+	} else {
+    //printk("In nand_read_oob() call nand_do_read_ops():and ops->len is %d\n", ops->len);
+		ret = nand_do_read_ops(mtd, from, ops);
+		if (ret == -EBADMSG) {
+			nand_release_device(mtd);
+			nand_block_markbad_wmt(mtd, from, 1);
+			return ret;
+		}
+	}
+
+ out:
+	nand_release_device(mtd);
+	return ret;
+}
+
+       
+/**
+ * nand_read_bbt_facmk - [MTD Interface] NAND read data and/or out-of-band
+ * @mtd:	MTD device structure
+ * @from:	offset to read from
+ * @ops:	oob operation description structure
+ *
+ * NAND read factory-marked bad block information
+ */
+static int nand_read_bbt_facmk(struct mtd_info *mtd, loff_t from,
+			 struct mtd_oob_ops *ops)
+{
+	struct nand_chip *chip = mtd->priv;
+	int ret = -ENOTSUPP;
+	//printk("enter nand_read_bbt_facmk\n");
+	ops->retlen = 0;
+
+	/* Do not allow reads past end of device */
+	if (ops->datbuf && (from + ops->len) > mtd->size) {
+		pr_debug("%s: attempt to read beyond end of device\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	nand_get_device(chip, mtd, FL_READING);
+
+	switch (ops->mode) {
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
+	case MTD_OPS_RAW:
+		break;
+
+	default:
+		goto out;
+	}
+
+	if (!ops->datbuf) {
+		ret = nand_do_read_bb_oob(mtd, from, ops);
+		//printk("enter nand_read_bbt_facmk nand_do_read_bb_oob yes\n");
+	} else {
+		//printk("enter nand_read_bbt_facmk nand_do_read_ops no\n");
+		ret = nand_do_read_ops(mtd, from, ops);
+	}
+
+out:
+	nand_release_device(mtd);
+	return ret;
+}
+
+
+/**
+ * nand_write_page_raw - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ *
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
+ */
+static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+				const uint8_t *buf)
+{
+	chip->write_buf(mtd, buf, mtd->writesize);
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
+
+/**
+ * nand_write_page_raw_syndrome - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ *
+ * We need a special oob layout and handling even when ECC isn't checked.
+ */
+static void nand_write_page_raw_syndrome(struct mtd_info *mtd,
+					struct nand_chip *chip,
+					const uint8_t *buf)
+{
+	int eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	uint8_t *oob = chip->oob_poi;
+	int steps, size;
+
+	for (steps = chip->ecc.steps; steps > 0; steps--) {
+		chip->write_buf(mtd, buf, eccsize);
+		buf += eccsize;
+
+		if (chip->ecc.prepad) {
+			chip->write_buf(mtd, oob, chip->ecc.prepad);
+			oob += chip->ecc.prepad;
+		}
+
+		chip->read_buf(mtd, oob, eccbytes);
+		oob += eccbytes;
+
+		if (chip->ecc.postpad) {
+			chip->write_buf(mtd, oob, chip->ecc.postpad);
+			oob += chip->ecc.postpad;
+		}
+	}
+
+	size = mtd->oobsize - (oob - chip->oob_poi);
+	if (size)
+		chip->write_buf(mtd, oob, size);
+}
+/**
+ * nand_write_page_swecc - [REPLACEABLE] software ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ */
+static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+				  const uint8_t *buf)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	const uint8_t *p = buf;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+	/* Software ECC calculation */
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+	for (i = 0; i < chip->ecc.total; i++)
+		chip->oob_poi[eccpos[i]] = ecc_calc[i];
+
+	chip->ecc.write_page_raw(mtd, chip, buf);
+}
+
+/**
+ * nand_write_page_hwecc - [REPLACEABLE] hardware ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ */
+static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+				  const uint8_t *buf)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+	const uint8_t *p = buf;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+		chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+		chip->write_buf(mtd, p, eccsize);
+		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+	}
+
+	for (i = 0; i < chip->ecc.total; i++)
+		chip->oob_poi[eccpos[i]] = ecc_calc[i];
+
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
+
+/**
+ * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ *
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
+ */
+static void nand_write_page_syndrome(struct mtd_info *mtd,
+				    struct nand_chip *chip, const uint8_t *buf)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	const uint8_t *p = buf;
+	uint8_t *oob = chip->oob_poi;
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+
+		chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+		chip->write_buf(mtd, p, eccsize);
+
+		if (chip->ecc.prepad) {
+			chip->write_buf(mtd, oob, chip->ecc.prepad);
+			oob += chip->ecc.prepad;
+		}
+
+		chip->ecc.calculate(mtd, p, oob);
+		chip->write_buf(mtd, oob, eccbytes);
+		oob += eccbytes;
+
+		if (chip->ecc.postpad) {
+			chip->write_buf(mtd, oob, chip->ecc.postpad);
+			oob += chip->ecc.postpad;
+		}
+	}
+
+	/* Calculate remaining oob bytes */
+	i = mtd->oobsize - (oob - chip->oob_poi);
+	if (i)
+		chip->write_buf(mtd, oob, i);
+}
+
+/**
+ * nand_write_page - [REPLACEABLE] write one page
+ * @mtd: MTD device structure
+ * @chip: NAND chip descriptor
+ * @buf: the data to write
+ * @page: page number to write
+ * @cached: cached programming
+ * @raw: use _raw version of write_page
+ */
+static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+			   const uint8_t *buf, int page, int cached, int raw)
+{
+	int status;
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+
+	if (unlikely(raw))
+		chip->ecc.write_page_raw(mtd, chip, buf);
+	else
+		chip->ecc.write_page(mtd, chip, buf);
+
+	/*
+	 * Cached progamming disabled for now. Not sure if it's worth the
+	 * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s).
+	 */
+	cached = 0;
+
+	if (!cached || !(chip->options & NAND_CACHEPRG)) {
+
+		chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+		status = chip->waitfunc(mtd, chip);
+		/*
+		 * See if operation failed and additional status checks are
+		 * available.
+		 */
+		if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+			status = chip->errstat(mtd, chip, FL_WRITING, status,
+					       page);
+
+		if (status & NAND_STATUS_FAIL)
+			return -EIO;
+	} else {
+		chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1);
+		status = chip->waitfunc(mtd, chip);
+	}
+
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+	/* Send command to read back the data */
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+	if (chip->verify_buf(mtd, buf, mtd->writesize))
+		return -EIO;
+#endif
+	return 0;
+}
+
+/**
+ * nand_fill_oob - [INTERN] Transfer client buffer to oob
+ * @mtd: MTD device structure
+ * @oob: oob data buffer
+ * @len: oob data write length
+ * @ops: oob ops structure
+ */
+static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
+			      struct mtd_oob_ops *ops)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	/*
+	 * Initialise to all 0xFF, to avoid the possibility of left over OOB
+	 * data from a previous OOB read.
+	 */
+	memset(chip->oob_poi, 0xff, mtd->oobsize);
+
+	switch (ops->mode) {
+
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_RAW:
+		memcpy(chip->oob_poi + ops->ooboffs, oob, len);
+		return oob + len;
+
+	case MTD_OPS_AUTO_OOB: {
+		struct nand_oobfree *free = chip->ecc.layout->oobfree;
+		uint32_t boffs = 0, woffs = ops->ooboffs;
+		size_t bytes = 0;
+
+		for (; free->length && len; free++, len -= bytes) {
+			/* Write request not from offset 0? */
+			if (unlikely(woffs)) {
+				if (woffs >= free->length) {
+					woffs -= free->length;
+					continue;
+				}
+				boffs = free->offset + woffs;
+				bytes = min_t(size_t, len,
+					      (free->length - woffs));
+				woffs = 0;
+			} else {
+				bytes = min_t(size_t, len, free->length);
+				boffs = free->offset;
+			}
+			memcpy(chip->oob_poi + boffs, oob, bytes);
+			oob += bytes;
+		}
+		return oob;
+	}
+	default:
+		BUG();
+	}
+	return NULL;
+}
+
+#define NOTALIGNED(x)	((x & (chip->subpagesize - 1)) != 0)
+
+/**
+ * nand_do_write_ops - [INTERN] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
+ *
+ * NAND write with ECC.
+ */
+static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
+			     struct mtd_oob_ops *ops)
+{
+	int chipnr, realpage, page, blockmask, column;
+	struct nand_chip *chip = mtd->priv;
+	uint32_t writelen = ops->len;
+
+	uint32_t oobwritelen = ops->ooblen;
+	uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
+				mtd->oobavail : mtd->oobsize;
+
+	uint8_t *oob = ops->oobbuf;
+	uint8_t *buf = ops->datbuf;
+	int ret, subpage;
+
+	ops->retlen = 0;
+	if (!writelen)
+		return 0;
+
+	/* Reject writes, which are not page aligned */
+	if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
+		pr_notice("%s: attempt to write non page aligned data\n",
+			   __func__);
+		return -EINVAL;
+	}
+
+	//column = to & (mtd->writesize - 1);
+	column = ((int)(to>>10)) % mtd->pageSizek;
+	column = column << 10;
+	//subpage = column || (writelen & (mtd->writesize - 1));
+	subpage = column || (writelen < mtd->writesize);
+//printk("column=%d subpage=%d writelen=%d\n", column, subpage, writelen);
+	if (subpage && oob)
+		return -EINVAL;
+
+	//chipnr = (int)(to >> chip->chip_shift);
+	chipnr = ((int)(to >> (10+chip->pagecnt_shift)))/(mtd->pageSizek*mtd->blkcnt);
+	chip->select_chip(mtd, chipnr);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd))
+		return -EIO;
+
+	//realpage = (int)(to >> chip->page_shift);
+	realpage = ((int)(to >> 10))/mtd->pageSizek;
+	page = realpage & chip->pagemask;
+	//blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+	blockmask = (1 << (chip->pagecnt_shift)) - 1;
+
+	if(chipnr > 0) {
+		second_chip = 1;
+	} else {
+		second_chip = 0;
+	}
+	/* Invalidate the page cache, when we write to the cached page */
+	if (to <= (chip->pagebuf << chip->page_shift) &&
+	    (chip->pagebuf << chip->page_shift) < (to + ops->len))
+		chip->pagebuf = -1;
+
+	/* Don't allow multipage oob writes with offset */
+	if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
+		return -EINVAL;
+
+	while (1) {
+		int bytes = mtd->writesize;
+		int cached = writelen > bytes && page != blockmask;
+		uint8_t *wbuf = buf;
+
+		/* Partial page write? */
+		if (unlikely(column || writelen < (mtd->writesize - 1))) {
+			cached = 0;
+			bytes = min_t(int, bytes - column, (int) writelen);
+			chip->pagebuf = -1;
+			memset(chip->buffers->databuf, 0xff, mtd->writesize);
+			memcpy(&chip->buffers->databuf[column], buf, bytes);
+			wbuf = chip->buffers->databuf;
+		}
+
+		if (unlikely(oob)) {
+			size_t len = min(oobwritelen, oobmaxlen);
+			memset(chip->oob_poi, 0xff, mtd->oobsize);  /* edward wan add 20080606  */
+			oob = nand_fill_oob(mtd, oob, len, ops);
+			oobwritelen -= len;
+		} else {
+			/* We still need to erase leftover OOB data */
+			memset(chip->oob_poi, 0xff, mtd->oobsize);
+		}
+
+	//	ret = chip->write_page(mtd, chip, wbuf, page, cached,
+	//			       (ops->mode == MTD_OOB_RAW));
+		ret = chip->write_page(mtd, chip, wbuf, page, cached, ops->mode);
+		if (ret)
+			break;
+
+		writelen -= bytes;
+		if (!writelen)
+			break;
+
+		column = 0;
+		buf += bytes;
+		realpage++;
+
+		page = realpage & chip->pagemask;
+		/* Check, if we cross a chip boundary */
+		if (!page) {
+			chipnr++;
+			chip->select_chip(mtd, -1);
+			chip->select_chip(mtd, chipnr);
+		}
+	}
+
+	ops->retlen = ops->len - writelen;
+	if (unlikely(oob))
+		ops->oobretlen = ops->ooblen;
+	return ret;
+}
+
+/**
+ * panic_nand_write - [MTD Interface] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
+ *
+ * NAND write with ECC. Used when performing writes in interrupt context, this
+ * may for example be called by mtdoops when writing an oops while in panic.
+ */
+static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
+			    size_t *retlen, const uint8_t *buf)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct mtd_oob_ops ops;
+	int ret;
+
+	/* Wait for the device to get ready */
+	panic_nand_wait(mtd, chip, 400);
+
+	/* Grab the device */
+	panic_nand_get_device(chip, mtd, FL_WRITING);
+
+	ops.len = len;
+	ops.datbuf = (uint8_t *)buf;
+	ops.oobbuf = NULL;
+	ops.mode = 0;
+
+	ret = nand_do_write_ops(mtd, to, &ops);
+
+	*retlen = ops.retlen;
+	return ret;
+}
+
+/**
+ * nand_write - [MTD Interface] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
+ *
+ * NAND write with ECC.
+ */
+static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
+			  size_t *retlen, const uint8_t *buf)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct mtd_oob_ops ops;
+	int ret;
+
+	nand_get_device(chip, mtd, FL_WRITING);
+	ops.len = len;
+	ops.datbuf = (uint8_t *)buf;
+	ops.oobbuf = NULL;
+	ops.mode = 0;
+	ret = nand_do_write_ops(mtd, to, &ops);
+	*retlen = ops.retlen;
+	nand_release_device(mtd);
+	return ret;
+}
+
+/**
+ * nand_do_write_oob - [MTD Interface] NAND write out-of-band
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
+ *
+ * NAND write out-of-band.
+ */
+static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+			     struct mtd_oob_ops *ops)
+{
+	int chipnr, page, status, len;
+	struct nand_chip *chip = mtd->priv;
+
+	pr_debug("%s: to = 0x%08x, len = %i\n",
+			 __func__, (unsigned int)to, (int)ops->ooblen);
+
+	if (ops->mode == MTD_OPS_AUTO_OOB)
+		len = chip->ecc.layout->oobavail;
+	else
+		len = mtd->oobsize;
+
+	/* Do not allow write past end of page */
+	if ((ops->ooboffs + ops->ooblen) > len) {
+		pr_debug("%s: attempt to write past end of page\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	if (unlikely(ops->ooboffs >= len)) {
+		pr_debug("%s: attempt to start write outside oob\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	/* Do not allow write past end of device */
+	if (unlikely(to >= mtd->size ||
+		     ops->ooboffs + ops->ooblen >
+			((mtd->size >> chip->page_shift) -
+			 (to >> chip->page_shift)) * len)) {
+		pr_debug("%s: attempt to write beyond end of device\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	//chipnr = (int)(to >> chip->chip_shift);
+	chipnr = ((int)(to >> (10+chip->pagecnt_shift)))/(mtd->pageSizek*mtd->blkcnt);
+	chip->select_chip(mtd, chipnr);
+
+	/* Shift to get page */
+	page = (int)(to >> chip->page_shift);
+
+	/*
+	 * Reset the chip. Some chips (like the Toshiba TC5832DC found in one
+	 * of my DiskOnChip 2000 test units) will clear the whole data page too
+	 * if we don't do this. I have no clue why, but I seem to have 'fixed'
+	 * it in the doc2000 driver in August 1999.  dwmw2.
+	 */
+	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd))
+		return -EROFS;
+
+	/* Invalidate the page cache, if we write to the cached page */
+	if (page == chip->pagebuf)
+		chip->pagebuf = -1;
+
+	nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops);
+
+	if (ops->mode == MTD_OPS_RAW)
+		status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask);
+	else
+		status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
+
+	if (status)
+		return status;
+
+	ops->oobretlen = ops->ooblen;
+
+	return 0;
+}
+
+/**
+ * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
+ */
+static int nand_write_oob(struct mtd_info *mtd, loff_t to,
+			  struct mtd_oob_ops *ops)
+{
+	struct nand_chip *chip = mtd->priv;
+	int ret = -ENOTSUPP;
+
+	ops->retlen = 0;
+
+	/* Do not allow writes past end of device */
+	if (ops->datbuf && (to + ops->len) > mtd->size) {
+		pr_debug("%s: attempt to write beyond end of device\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	nand_get_device(chip, mtd, FL_WRITING);
+
+	switch (ops->mode) {
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
+	case MTD_OPS_RAW:
+		break;
+
+	default:
+		goto out;
+	}
+
+	if (!ops->datbuf)
+		ret = nand_do_write_oob(mtd, to, ops);
+	else
+		ret = nand_do_write_ops(mtd, to, ops);
+
+out:
+	nand_release_device(mtd);
+	return ret;
+}
+
+/**
+ * get_para - [MTD Interface] NAND get retry and eslc information
+ * @mtd:	MTD device structure
+ * @to:		offset to write to
+ * @ops:	oob operation description structure
+ */
+static int get_para(struct mtd_info *mtd, int chipnr)
+{
+	struct nand_chip *chip = mtd->priv;
+	int ret = -ENOTSUPP;
+	
+	nand_get_device(chip, mtd, FL_READING);
+
+	
+	chip->select_chip(mtd, chipnr);
+
+	chip->get_para(mtd, chip);
+
+	chip->select_chip(mtd, -1);
+
+
+	nand_release_device(mtd);
+	return ret;
+}
+/*
+ * single_erase_cmd - [GENERIC] NAND standard block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
+ *
+ * Standard erase command for NAND chips.
+ */
+extern unsigned int par4_ofs;
+extern unsigned int prob_end;
+static void single_erase_cmd(struct mtd_info *mtd, int page)
+{
+	struct nand_chip *chip = mtd->priv;
+	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+	chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+}
+
+/**
+ * multi_erase_cmd - [GENERIC] AND specific block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
+ *
+ * AND multi block erase command function. Erase 4 consecutive blocks.
+ */
+static void multi_erase_cmd(struct mtd_info *mtd, int page)
+{
+	struct nand_chip *chip = mtd->priv;
+	/* Send commands to erase a block */
+	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
+	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
+	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++);
+	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+	chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+}
+
+/**
+ * nand_erase - [MTD Interface] erase block(s)
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ *
+ * Erase one ore more blocks.
+ */
+static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	return nand_erase_nand(mtd, instr, 0);
+}
+
+#define BBT_PAGE_MASK	0xffffff3f
+/**
+ * nand_erase_nand - [INTERN] erase block(s)
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ * @allowbbt: allow erasing the bbt area
+ *
+ * Erase one ore more blocks.
+ */
+int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
+		    int allowbbt)
+{
+	int page, status, pages_per_block, ret, chipnr;
+	struct nand_chip *chip = mtd->priv;
+	loff_t rewrite_bbt[NAND_MAX_CHIPS] = {0};
+	unsigned int bbt_masked_page = 0xffffffff;
+	loff_t len;
+
+	pr_debug("%s: start = 0x%012llx, len = %llu\n",
+			__func__, (unsigned long long)instr->addr,
+			(unsigned long long)instr->len);
+
+	if (check_offs_len(mtd, instr->addr, instr->len))
+		return -EINVAL;
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device(chip, mtd, FL_ERASING);
+
+	/* Shift to get first page */
+	//page = (int)(instr->addr >> chip->page_shift);
+	page = ((int)(instr->addr >> 10))/mtd->pageSizek;
+	//chipnr = (int)(instr->addr >> chip->chip_shift);
+	chipnr = ((int)(instr->addr >> (10+chip->pagecnt_shift)))/(mtd->pageSizek*mtd->blkcnt);
+
+	if(chipnr > 0)
+		second_chip = 1;
+	else 
+		second_chip = 0;
+
+	if (chip->cur_chip && (chip->cur_chip->nand_id>>24) == NAND_MFR_HYNIX && prob_end == 1) {
+		if (page < par4_ofs && second_chip == 0) {
+			//printk("SKIP Multi erase page 0x%x, par4_ofs 0x%x\n", page, par4_ofs);
+			instr->state = MTD_ERASE_DONE;
+			ret = 0;
+			nand_release_device(mtd);
+			return ret;
+		}
+	}
+
+	/* Calculate pages in each block */
+	//pages_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
+	pages_per_block = 1 << chip->pagecnt_shift;
+
+	/* Select the NAND device */
+	chip->select_chip(mtd, chipnr);
+
+	/* Check, if it is write protected */
+	if (nand_check_wp(mtd)) {
+		pr_debug("%s: device is write protected!\n",
+				__func__);
+		instr->state = MTD_ERASE_FAILED;
+		goto erase_exit;
+	}
+
+	/*
+	 * If BBT requires refresh, set the BBT page mask to see if the BBT
+	 * should be rewritten. Otherwise the mask is set to 0xffffffff which
+	 * can not be matched. This is also done when the bbt is actually
+	 * erased to avoid recursive updates.
+	 */
+	if (chip->options & BBT_AUTO_REFRESH && !allowbbt)
+		bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
+
+	/* Loop through the pages */
+	len = instr->len;
+
+	instr->state = MTD_ERASING;
+
+	while (len) {
+		/* Check if we have a bad block, we do not erase bad blocks! */
+		if(allowbbt != 0xFF) {    /* normal flow */
+		//if (nand_block_checkbad(mtd, ((loff_t) page) <<	chip->page_shift, 0, allowbbt)) {
+		if (nand_block_checkbad(mtd, ((loff_t) (page*mtd->pageSizek)) <<	10, 0, allowbbt, 1)) {
+			pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
+				    __func__, page);
+				printk("nand_erase: attempt to erase a "
+						"bad block at page 0x%08x\n", page);
+			instr->state = MTD_ERASE_FAILED;
+			goto erase_exit;
+		}
+		}
+
+		/*
+		 * Invalidate the page cache, if we erase the block which
+		 * contains the current cached page.
+		 */
+		if (page <= chip->pagebuf && chip->pagebuf <
+		    (page + pages_per_block))
+			chip->pagebuf = -1;
+
+		chip->erase_cmd(mtd, page & chip->pagemask);
+
+		status = chip->waitfunc(mtd, chip);
+
+		if (chip->realplanenum && (status & NAND_STATUS_FAIL)) {
+			/*if (abv != 13479) {
+				status = 0xe3;//0xe5;
+				abv = 13479;
+				printk("erase page=%x error abv=%d\n", page, abv);
+			}*/
+			chip->status_plane[0] = page;
+			chip->status_plane[1] = status;
+			printk("erase blk=%x error status=0x%x\n", page/mtd->pagecnt, status);
+			//while(1);
+		}
+
+		/*
+		 * See if operation failed and additional status checks are
+		 * available
+		 */
+		if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+			status = chip->errstat(mtd, chip, FL_ERASING,
+					       status, page);
+
+		/* See if block erase succeeded */
+		if (status & NAND_STATUS_FAIL) {
+			pr_debug("%s: failed erase, page 0x%08x\n",
+					__func__, page);
+			printk( "nand_erase: "
+					"Failed erase, page 0x%08x ", page);
+			if(allowbbt == 0xFF) {
+				//len -= (1 << chip->phys_erase_shift);
+				len -= mtd->erasesize;
+				page += pages_per_block;
+				printk( "continue next\n");
+				continue;
+			} else
+				printk( "\n");
+
+			instr->state = MTD_ERASE_FAILED;
+			instr->fail_addr =
+				//((loff_t)page << chip->page_shift);
+				((loff_t)(page*mtd->pageSizek)) <<	10;
+			printk("nand_erase: goto erase_exit\n");
+			goto erase_exit;
+		}
+
+		/*
+		 * If BBT requires refresh, set the BBT rewrite flag to the
+		 * page being erased.
+		 */
+		if (bbt_masked_page != 0xffffffff &&
+		    (page & BBT_PAGE_MASK) == bbt_masked_page)
+			    rewrite_bbt[chipnr] =
+					//((loff_t)page << chip->page_shift);
+					((loff_t)(page*mtd->pageSizek)) <<	10;
+
+		/* Increment page address and decrement length */
+		//len -= (1 << chip->phys_erase_shift);
+		len -= mtd->erasesize;
+		page += pages_per_block;
+		if (len)
+printk("-----------------------------------er%d=blk=%d len=%llu\n",page,page/256, (unsigned long long)len);
+		/* Check, if we cross a chip boundary */
+		if (len && !(page & chip->pagemask)) {
+			chipnr++;
+			chip->select_chip(mtd, -1);
+			chip->select_chip(mtd, chipnr);
+
+			/*
+			 * If BBT requires refresh and BBT-PERCHIP, set the BBT
+			 * page mask to see if this BBT should be rewritten.
+			 */
+			if (bbt_masked_page != 0xffffffff &&
+			    (chip->bbt_td->options & NAND_BBT_PERCHIP))
+				bbt_masked_page = chip->bbt_td->pages[chipnr] &
+					BBT_PAGE_MASK;
+		}
+	}
+	instr->state = MTD_ERASE_DONE;
+
+erase_exit:
+
+	ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
+
+	/* Deselect and wake up anyone waiting on the device */
+	nand_release_device(mtd);
+
+	/* Do call back function */
+	if (!ret)
+		mtd_erase_callback(instr);
+
+	/*
+	 * If BBT requires refresh and erase was successful, rewrite any
+	 * selected bad block tables.
+	 */
+	if (bbt_masked_page == 0xffffffff || ret)
+		return ret;
+
+	for (chipnr = 0; chipnr < chip->numchips; chipnr++) {
+		if (!rewrite_bbt[chipnr])
+			continue;
+		/* Update the BBT for chip */
+		pr_debug("%s: nand_update_bbt (%d:0x%0llx 0x%0x)\n",
+				__func__, chipnr, rewrite_bbt[chipnr],
+				chip->bbt_td->pages[chipnr]);
+		printk( "nand_erase_nand: nand_update_bbt "
+				"(%d:0x%0llx 0x%0x) page=%x\n", chipnr, rewrite_bbt[chipnr],
+				chip->bbt_td->pages[chipnr], page);
+		nand_update_bbt(mtd, rewrite_bbt[chipnr]);
+	}
+
+	/* Return more or less happy */
+	return ret;
+}
+
+/**
+ * nand_sync - [MTD Interface] sync
+ * @mtd: MTD device structure
+ *
+ * Sync is actually a wait for chip ready function.
+ */
+static void nand_sync(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	pr_debug("%s: called\n", __func__);
+
+	/* Grab the lock and see if the device is available */
+	nand_get_device(chip, mtd, FL_SYNCING);
+	/* Release it and go back */
+	nand_release_device(mtd);
+}
+
+/**
+ * nand_block_isbad - [MTD Interface] Check if block at offset is bad
+ * @mtd: MTD device structure
+ * @offs: offset relative to mtd start
+ */
+static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
+{
+	return nand_block_checkbad(mtd, offs, 1, 0, 1);
+}
+
+static int nand_block_isbad_wmt(struct mtd_info *mtd, loff_t offs)
+{
+	return nand_block_checkbad(mtd, offs, 1, 0, 0);
+}
+
+/**
+ * nand_block_markbad_wmt - [MTD Interface] Mark block at the given offset as bad
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
+ * @type: worn out or reserved(unrecoveryable error occurs).
+ */
+static int nand_block_markbad_wmt(struct mtd_info *mtd, loff_t ofs, int type)
+{
+	struct nand_chip *chip = mtd->priv;
+	int ret;
+
+	ret = nand_block_isbad_wmt(mtd, ofs);
+	if (ret) {
+		/* If it was bad already, return success and do nothing */
+		if (ret > 0)
+			return 0;
+		return ret;
+	}
+
+	return chip->block_markbad(mtd, ofs, type);
+}
+
+
+/**
+ * nand_block_markbad - [MTD Interface] Mark block at the given offset as bad
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
+ */
+static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+	struct nand_chip *chip = mtd->priv;
+	int ret;
+
+	ret = nand_block_isbad(mtd, ofs);
+	if (ret) {
+		/* If it was bad already, return success and do nothing */
+		if (ret > 0)
+			return 0;
+		return ret;
+	}
+
+	return chip->block_markbad(mtd, ofs, 0);
+}
+
+/**
+ * nand_suspend - [MTD Interface] Suspend the NAND flash
+ * @mtd: MTD device structure
+ */
+static int nand_suspend(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	return nand_get_device(chip, mtd, FL_PM_SUSPENDED);
+}
+
+/**
+ * nand_resume - [MTD Interface] Resume the NAND flash
+ * @mtd: MTD device structure
+ */
+static void nand_resume(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (chip->state == FL_PM_SUSPENDED)
+		nand_release_device(mtd);
+	else
+		pr_err("called for a chip which is not in suspended state\n");
+}
+
+/* Set default functions */
+static void nand_set_defaults(struct nand_chip *chip, int busw)
+{
+	/* check for proper chip_delay setup, set 20us if not */
+	if (!chip->chip_delay)
+		chip->chip_delay = 20;
+
+	/* check, if a user supplied command function given */
+	if (chip->cmdfunc == NULL)
+		chip->cmdfunc = nand_command;
+
+	/* check, if a user supplied wait function given */
+	if (chip->waitfunc == NULL)
+		chip->waitfunc = nand_wait;
+
+	if (!chip->select_chip)
+		chip->select_chip = nand_select_chip;
+	if (!chip->read_byte)
+		chip->read_byte = busw ? nand_read_byte16 : nand_read_byte;
+	if (!chip->read_word)
+		chip->read_word = nand_read_word;
+	if (!chip->block_bad)
+		chip->block_bad = nand_block_bad;
+	if (!chip->block_markbad)
+		chip->block_markbad = nand_default_block_markbad;
+	if (!chip->write_buf)
+		chip->write_buf = busw ? nand_write_buf16 : nand_write_buf;
+	if (!chip->read_buf)
+		chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
+	if (!chip->verify_buf)
+		chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
+	if (!chip->scan_bbt)
+		chip->scan_bbt = nand_default_bbt;
+
+	if (!chip->controller) {
+		chip->controller = &chip->hwcontrol;
+		spin_lock_init(&chip->controller->lock);
+		init_waitqueue_head(&chip->controller->wq);
+	}
+
+}
+#if 0
+
+/* Sanitize ONFI strings so we can safely print them */
+static void sanitize_string(uint8_t *s, size_t len)
+{
+	ssize_t i;
+
+	/* Null terminate */
+	s[len - 1] = 0;
+
+	/* Remove non printable chars */
+	for (i = 0; i < len - 1; i++) {
+		if (s[i] < ' ' || s[i] > 127)
+			s[i] = '?';
+	}
+
+	/* Remove trailing spaces */
+	strim(s);
+}
+
+static u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
+{
+	int i;
+	while (len--) {
+		crc ^= *p++ << 8;
+		for (i = 0; i < 8; i++)
+			crc = (crc << 1) ^ ((crc & 0x8000) ? 0x8005 : 0);
+	}
+
+	return crc;
+}
+#endif
+static int shift_bit(uint64_t value)
+{
+	int i = 0;
+	while (!(value & 1)) {
+		value >>= 1;
+		i++;
+		if (i == 63)
+			break;
+	}
+	/* return the number count of "zero" bit */
+	return i;
+}
+#if 0
+/*
+ * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
+ */
+static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
+					int *busw)
+{
+	struct nand_onfi_params *p = &chip->onfi_params;
+	int i;
+	int val;
+
+	/* Try ONFI for unknown chip or LP */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
+	if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
+		chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
+		return 0;
+
+	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
+	for (i = 0; i < 3; i++) {
+		chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
+		if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
+				le16_to_cpu(p->crc)) {
+			pr_info("ONFI param page %d valid\n", i);
+			break;
+		}
+	}
+
+	if (i == 3)
+		return 0;
+
+	/* Check version */
+	val = le16_to_cpu(p->revision);
+	if (val & (1 << 5))
+		chip->onfi_version = 23;
+	else if (val & (1 << 4))
+		chip->onfi_version = 22;
+	else if (val & (1 << 3))
+		chip->onfi_version = 21;
+	else if (val & (1 << 2))
+		chip->onfi_version = 20;
+	else if (val & (1 << 1))
+		chip->onfi_version = 10;
+	else
+		chip->onfi_version = 0;
+
+	if (!chip->onfi_version) {
+		pr_info("%s: unsupported ONFI version: %d\n", __func__, val);
+		return 0;
+	}
+
+	sanitize_string(p->manufacturer, sizeof(p->manufacturer));
+	sanitize_string(p->model, sizeof(p->model));
+	if (!mtd->name)
+		mtd->name = p->model;
+	mtd->writesize = le32_to_cpu(p->byte_per_page);
+	mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
+	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+	chip->chipsize = le32_to_cpu(p->blocks_per_lun);
+	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+	*busw = 0;
+	if (le16_to_cpu(p->features) & 1)
+		*busw = NAND_BUSWIDTH_16;
+
+	chip->options &= ~NAND_CHIPOPTIONS_MSK;
+	chip->options |= (NAND_NO_READRDY |
+			NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK;
+
+	pr_info("ONFI flash detected\n");
+	return 1;
+}
+
+/*
+ * Get the flash and manufacturer id and lookup if the type is supported.
+ */
+static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
+						  struct nand_chip *chip,
+						  int busw,
+						  int *maf_id, int *dev_id,
+						  struct nand_flash_dev *type)
+{
+	int i, maf_idx;
+	u8 id_data[8];
+	int ret;
+
+	/* Select the device */
+	chip->select_chip(mtd, 0);
+
+	/*
+	 * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
+	 * after power-up.
+	 */
+	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+	/* Send the command for reading device ID */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+	/* Read manufacturer and device IDs */
+	*maf_id = chip->read_byte(mtd);
+	*dev_id = chip->read_byte(mtd);
+
+	/*
+	 * Try again to make sure, as some systems the bus-hold or other
+	 * interface concerns can cause random data which looks like a
+	 * possibly credible NAND flash to appear. If the two results do
+	 * not match, ignore the device completely.
+	 */
+
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+	for (i = 0; i < 2; i++)
+		id_data[i] = chip->read_byte(mtd);
+
+	if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
+		pr_info("%s: second ID read did not match "
+			"%02x,%02x against %02x,%02x\n", __func__,
+			*maf_id, *dev_id, id_data[0], id_data[1]);
+		return ERR_PTR(-ENODEV);
+	}
+
+	if (!type)
+		type = nand_flash_ids;
+
+	for (; type->name != NULL; type++)
+		if (*dev_id == type->id)
+			break;
+
+	chip->onfi_version = 0;
+	if (!type->name || !type->pagesize) {
+		/* Check is chip is ONFI compliant */
+		ret = nand_flash_detect_onfi(mtd, chip, &busw);
+		if (ret)
+			goto ident_done;
+	}
+
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+	/* Read entire ID string */
+
+	for (i = 0; i < 8; i++)
+		id_data[i] = chip->read_byte(mtd);
+
+	if (!type->name)
+		return ERR_PTR(-ENODEV);
+
+	if (!mtd->name)
+		mtd->name = type->name;
+
+	chip->chipsize = (uint64_t)type->chipsize << 20;
+
+	if (!type->pagesize && chip->init_size) {
+		/* Set the pagesize, oobsize, erasesize by the driver */
+		busw = chip->init_size(mtd, chip, id_data);
+	} else if (!type->pagesize) {
+		int extid;
+		/* The 3rd id byte holds MLC / multichip data */
+		chip->cellinfo = id_data[2];
+		/* The 4th id byte is the important one */
+		extid = id_data[3];
+
+		/*
+		 * Field definitions are in the following datasheets:
+		 * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
+		 * New style   (6 byte ID): Samsung K9GBG08U0M (p.40)
+		 *
+		 * Check for wraparound + Samsung ID + nonzero 6th byte
+		 * to decide what to do.
+		 */
+		if (id_data[0] == id_data[6] && id_data[1] == id_data[7] &&
+				id_data[0] == NAND_MFR_SAMSUNG &&
+				(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+				id_data[5] != 0x00) {
+			/* Calc pagesize */
+			mtd->writesize = 2048 << (extid & 0x03);
+			extid >>= 2;
+			/* Calc oobsize */
+			switch (extid & 0x03) {
+			case 1:
+				mtd->oobsize = 128;
+				break;
+			case 2:
+				mtd->oobsize = 218;
+				break;
+			case 3:
+				mtd->oobsize = 400;
+				break;
+			default:
+				mtd->oobsize = 436;
+				break;
+			}
+			extid >>= 2;
+			/* Calc blocksize */
+			mtd->erasesize = (128 * 1024) <<
+				(((extid >> 1) & 0x04) | (extid & 0x03));
+			busw = 0;
+		} else {
+			/* Calc pagesize */
+			mtd->writesize = 1024 << (extid & 0x03);
+			extid >>= 2;
+			/* Calc oobsize */
+			mtd->oobsize = (8 << (extid & 0x01)) *
+				(mtd->writesize >> 9);
+			extid >>= 2;
+			/* Calc blocksize. Blocksize is multiples of 64KiB */
+			mtd->erasesize = (64 * 1024) << (extid & 0x03);
+			extid >>= 2;
+			/* Get buswidth information */
+			busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+		}
+	} else {
+		/*
+		 * Old devices have chip data hardcoded in the device id table.
+		 */
+		mtd->erasesize = type->erasesize;
+		mtd->writesize = type->pagesize;
+		mtd->oobsize = mtd->writesize / 32;
+		busw = type->options & NAND_BUSWIDTH_16;
+
+		/*
+		 * Check for Spansion/AMD ID + repeating 5th, 6th byte since
+		 * some Spansion chips have erasesize that conflicts with size
+		 * listed in nand_ids table.
+		 * Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39)
+		 */
+		if (*maf_id == NAND_MFR_AMD && id_data[4] != 0x00 &&
+				id_data[5] == 0x00 && id_data[6] == 0x00 &&
+				id_data[7] == 0x00 && mtd->writesize == 512) {
+			mtd->erasesize = 128 * 1024;
+			mtd->erasesize <<= ((id_data[3] & 0x03) << 1);
+		}
+	}
+	/* Get chip options, preserve non chip based options */
+	chip->options &= ~NAND_CHIPOPTIONS_MSK;
+	chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
+
+	/*
+	 * Check if chip is not a Samsung device. Do not clear the
+	 * options for chips which do not have an extended id.
+	 */
+	if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
+		chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+ident_done:
+
+	/*
+	 * Set chip as a default. Board drivers can override it, if necessary.
+	 */
+	chip->options |= NAND_NO_AUTOINCR;
+
+	/* Try to identify manufacturer */
+	for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
+		if (nand_manuf_ids[maf_idx].id == *maf_id)
+			break;
+	}
+
+	/*
+	 * Check, if buswidth is correct. Hardware drivers should set
+	 * chip correct!
+	 */
+	if (busw != (chip->options & NAND_BUSWIDTH_16)) {
+		pr_info("NAND device: Manufacturer ID:"
+			" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
+			*dev_id, nand_manuf_ids[maf_idx].name, mtd->name);
+		pr_warn("NAND bus width %d instead %d bit\n",
+			   (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
+			   busw ? 16 : 8);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* Calculate the address shift from the page size */
+	chip->page_shift = ffs(mtd->writesize) - 1;
+	/* Convert chipsize to number of pages per chip -1 */
+	chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+
+	chip->bbt_erase_shift = chip->phys_erase_shift =
+		ffs(mtd->erasesize) - 1;
+	if (chip->chipsize & 0xffffffff)
+		chip->chip_shift = ffs((unsigned)chip->chipsize) - 1;
+	else {
+		chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32));
+		chip->chip_shift += 32 - 1;
+	}
+
+	chip->badblockbits = 8;
+
+	/* Set the bad block position */
+	if (mtd->writesize > 512 || (busw & NAND_BUSWIDTH_16))
+		chip->badblockpos = NAND_LARGE_BADBLOCK_POS;
+	else
+		chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
+
+	/*
+	 * Bad block marker is stored in the last page of each block
+	 * on Samsung and Hynix MLC devices; stored in first two pages
+	 * of each block on Micron devices with 2KiB pages and on
+	 * SLC Samsung, Hynix, Toshiba, AMD/Spansion, and Macronix.
+	 * All others scan only the first page.
+	 */
+	if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+			(*maf_id == NAND_MFR_SAMSUNG ||
+			 *maf_id == NAND_MFR_HYNIX))
+		chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
+	else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+				(*maf_id == NAND_MFR_SAMSUNG ||
+				 *maf_id == NAND_MFR_HYNIX ||
+				 *maf_id == NAND_MFR_TOSHIBA ||
+				 *maf_id == NAND_MFR_AMD ||
+				 *maf_id == NAND_MFR_MACRONIX)) ||
+			(mtd->writesize == 2048 &&
+			 *maf_id == NAND_MFR_MICRON))
+		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+
+	/* Check for AND chips with 4 page planes */
+	if (chip->options & NAND_4PAGE_ARRAY)
+		chip->erase_cmd = multi_erase_cmd;
+	else
+		chip->erase_cmd = single_erase_cmd;
+
+	/* Do not replace user supplied command function! */
+	if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
+		chip->cmdfunc = nand_command_lp;
+
+	pr_info("NAND device: Manufacturer ID:"
+		" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
+		nand_manuf_ids[maf_idx].name,
+		chip->onfi_version ? chip->onfi_params.model : type->name);
+
+	return type;
+}
+#endif
+/*
+ * Get the flash and manufacturer id and lookup if the type is supported
+ */
+static struct WMT_nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
+						  struct nand_chip *chip,
+						  int busw, int *maf_id)
+{
+	struct WMT_nand_flash_dev *type = NULL, type_env;
+	int i, dev_id, maf_idx, ret = 0, varlen = 10;
+	unsigned int id = 0, id_5th = 0, id1, flash_bank;
+	char varval[10];
+
+	/* Select the device */
+	chip->select_chip(mtd, 0);
+
+	/*  reset test: edwardwan add for debug 20071229  start*/
+	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+	/*  reset test: edwardwan add for debug 20071229  end*/
+
+	/* Send the command for reading device ID */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+	/* Read manufacturer and device IDs */
+	*maf_id = chip->read_byte(mtd);
+	for (i = 0; i < 3; i++) {
+		dev_id = chip->read_byte(mtd);
+		id += ((unsigned char)dev_id) <<((2-i)*8);
+	}
+	for (i = 0; i < 4; i++) {
+		dev_id = chip->read_byte(mtd);
+		id_5th += ((unsigned char)dev_id) <<((3-i)*8);
+	}
+	printk("nand chip device id = 0x%x 0x%x\n", id, id_5th);
+	#ifdef NAND_DEBUG
+	printk("nand chip device maf_id is %x, and dev_id is %x\n",*maf_id,dev_id);
+	#endif
+	id1 = (unsigned int)id + ((*maf_id)<<24);
+
+
+	/* Lookup the flash id */
+	/*for (i = 0; nand_flash_ids[i].name != NULL; i++) {
+		if (dev_id == nand_flash_ids[i].id) {*/
+	for (i = 0; WMT_nand_flash_ids[i].dwFlashID != 0; i++) {
+		if (((unsigned int)id + ((*maf_id)<<24)) == WMT_nand_flash_ids[i].dwFlashID) {
+			if (WMT_nand_flash_ids[i].dwFlashID == 0x98D79432)
+				if (id_5th != WMT_nand_flash_ids[i].dwFlashID2)
+					continue;
+			if (WMT_nand_flash_ids[i].dwFlashID == 0x98DE8493)
+				if (id_5th != WMT_nand_flash_ids[i].dwFlashID2)
+					continue;
+			type =  &WMT_nand_flash_ids[i];
+			//printk("find nand chip device id\n");
+			break;
+		}
+	}
+	#ifdef CONFIG_MTD_NAND_WMT
+	ret = get_flash_info_from_env(id1, id_5th, &type_env);
+
+	if (!ret) {
+		if (type)
+			printk(KERN_WARNING "Both table and env have flash id info, use env info first\n");
+		type = &type_env;
+	}
+	#endif
+
+	if (!type) {
+		return ERR_PTR(-ENODEV);
+	}
+	if (!mtd->name)
+		/*mtd->name = type->name;*/
+		mtd->name = "WMT.nand";
+
+	if (wmt_getsyspara("wmt.nand.ecc", varval, &varlen) == 0) {
+		varlen = simple_strtoul(varval, NULL, 10);
+		#ifdef DBG_60BIT_ECC
+		printk("wmt_nand_ecc=%s len=%d\n", varval, varlen);
+		printk("val=%s len=%d\n", varval, varlen);
+		#endif
+		flash_bank = type->dwPageSize >> 10;
+		if ((type->dwFlashID == 0x2C64444B && type->dwFlashID2 == 0xA9000000)
+		|| (type->dwFlashID == 0xADDE94EB && type->dwFlashID2 == 0x74440000)) {
+			if (varlen > type->dwECCBitNum) {
+				type->dwPageSize = type->dwPageSize - 2048;
+				type->dwBlockSize = (type->dwBlockSize/flash_bank)*(flash_bank-2);
+				type->dwECCBitNum = varlen;
+			}
+		}
+		#ifdef DBG_60BIT_ECC
+		printk("blksize=0x%x pagesize=0x%x ecc=%d\n", type->dwBlockSize, type->dwPageSize, type->dwECCBitNum);
+		#endif
+	}
+
+	/*chip->chipsize = type->chipsize << 20;*/
+	chip->chipsize = (uint64_t)type->dwBlockCount * (uint64_t)type->dwBlockSize;
+	if (((PLANE2_READ|PLANE2_PROG|PLANE2_ERASE) & type->dwSpeedUpCmd)
+	== (PLANE2_READ|PLANE2_PROG|PLANE2_ERASE)) {
+		chip->realplanenum = 1;
+		printk("\n ****realplanenum**** is %d",chip->realplanenum);
+	} else
+		chip->realplanenum = 0;
+
+	/* get all information from table */
+	mtd->blkcnt = type->dwBlockCount;
+	chip->cellinfo = type->dwNandType << 2;
+	mtd->realwritesize = mtd->writesize = type->dwPageSize;
+	mtd->realoobsize = mtd->oobsize = type->dwSpareSize;
+	mtd->realerasesize = mtd->erasesize = type->dwBlockSize;
+	if (chip->realplanenum) {//dan_multi
+		mtd->planenum = 2;
+		mtd->writesize *= 2;
+		mtd->erasesize *= 2;
+		mtd->oobsize *= 2;
+		mtd->blkcnt >>= 1;
+	} else
+		mtd->planenum = 1;
+	mtd->dwECCBitNum = type->dwECCBitNum;
+	mtd->ecc_err_level = 20;
+	if (mtd->dwECCBitNum >= 40)
+		mtd->ecc_err_level = mtd->dwECCBitNum - 10;
+	
+	mtd->dwRetry = type->dwRetry;
+	mtd->dwRdmz = type->dwRdmz;
+	mtd->id = type->dwFlashID;
+	mtd->id2 = type->dwFlashID2;
+	if (((mtd->id>>24)&0xFF) == NAND_MFR_TOSHIBA && type->dwDDR == 2)
+		mtd->dwDDR = type->dwDDR;
+	else
+		mtd->dwDDR = 0;
+	mtd->pageSizek = mtd->writesize >> 10;
+	mtd->pagecnt = mtd->erasesize/mtd->writesize;
+	mtd->spec_clk = type->dwRWTimming;
+	mtd->spec_tadl = type->dwTadl;
+	
+	busw = type->dwDataWidth ? NAND_BUSWIDTH_16 : 0;
+	chip->page_offset[0] = type->dwBI0Position;
+	chip->page_offset[1] = type->dwBI1Position;
+
+	/* Try to identify manufacturer */
+	for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
+		if (nand_manuf_ids[maf_idx].id == *maf_id)
+			break;
+	}
+
+	/*
+	 * Check, if buswidth is correct. Hardware drivers should set
+	 * chip correct !
+	 */
+	if (busw != (chip->options & NAND_BUSWIDTH_16)) {
+		printk(KERN_INFO "NAND device: Manufacturer ID:"
+				" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id,
+				/*dev_id, nand_manuf_ids[maf_idx].name, mtd->name);*/
+				id, nand_manuf_ids[maf_idx].name, mtd->name);
+		printk(KERN_WARNING "NAND bus width %d instead %d bit\n",
+				(chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
+				busw ? 16 : 8);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* Calculate the address shift from the page size */
+	chip->page_shift = ffs(mtd->writesize) - 1;
+	chip->pagecnt_shift = ffs(mtd->pagecnt) - 1;
+	//printk("------------------page_shift=%d pgcnt_shift=%d\n", chip->page_shift, chip->pagecnt_shift);
+	/* Convert chipsize to number of pages per chip -1. */
+	//chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+	chip->pagemask = (mtd->blkcnt*mtd->pagecnt) - 1;
+
+	chip->bbt_erase_shift = chip->phys_erase_shift =
+		ffs(mtd->erasesize) - 1;
+	if (chip->chipsize > 0x80000000)
+		chip->chip_shift = shift_bit(chip->chipsize);
+	else
+		chip->chip_shift = ffs(chip->chipsize) - 1;
+		//chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)) + 32 - 1;
+
+	chip->badblockbits = 8;
+	/* Set the bad block position */
+	chip->badblockpos = mtd->writesize > 512 ?
+		NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
+
+	/* Get chip options, preserve non chip based options */
+	chip->options &= ~NAND_CHIPOPTIONS_MSK;
+	chip->options |= type->options & NAND_CHIPOPTIONS_MSK;
+
+	/*
+	 * Set chip as a default. Board drivers can override it, if necessary
+	 */
+	chip->options |= NAND_NO_AUTOINCR;
+
+	/* Check if chip is a not a samsung device. Do not clear the
+	 * options for chips which are not having an extended id.
+	 */
+	/*if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)*//* Dannier:to support new table*/
+	if (*maf_id != NAND_MFR_SAMSUNG && type->dwPageSize > 512)
+		chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+
+	chip->options |= NAND_BBT_SCAN2NDPAGE;
+	/* Check for AND chips with 4 page planes */
+	if (!chip->realplanenum) {//dan_multi
+		if (chip->options & NAND_4PAGE_ARRAY)
+			chip->erase_cmd = multi_erase_cmd;
+		else
+			chip->erase_cmd = single_erase_cmd;
+	}
+
+	/* Do not replace user supplied command function ! */
+	if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
+		chip->cmdfunc = nand_command_lp;
+
+	printk(KERN_INFO "NAND device: Manufacturer ID:"
+			" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, id,
+			nand_manuf_ids[maf_idx].name, type->ProductName);
+
+#ifdef CONFIG_MTD_NAND_WMT
+	set_partition_size(mtd);
+	wmt_init_nfc(mtd, mtd->spec_clk, mtd->spec_tadl, busw);
+	set_ecc_info(mtd);
+	ret = alloc_write_cache(mtd);
+	if (ret)
+		return 0;
+	ret = alloc_rdmz_buffer(mtd);
+	if (ret)
+		return 0;
+#endif
+
+	return type;
+}
+
+/**
+ * nand_scan_ident - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
+ * @table: alternative NAND ID table
+ *
+ * This is the first phase of the normal nand_scan() function. It reads the
+ * flash ID and sets up MTD fields accordingly.
+ *
+ * The mtd->owner field must be set to the module of the caller.
+ */
+int nand_scan_ident(struct mtd_info *mtd, int maxchips,
+		    struct nand_flash_dev *table)
+{
+	int i = 1, busw, nand_maf_id/*, nand_dev_id*/;
+	struct nand_chip *chip = mtd->priv;
+	struct WMT_nand_flash_dev *type;
+
+	/* Get buswidth to select the correct functions */
+	busw = chip->options & NAND_BUSWIDTH_16;
+	/* Set the default functions */
+	nand_set_defaults(chip, busw);
+
+	/* Read the flash type */
+	type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id);
+	//type = nand_get_flash_type(mtd, chip, busw,
+				//&nand_maf_id, &nand_dev_id, table);
+
+	if (IS_ERR(type)) {
+		if (!(chip->options & NAND_SCAN_SILENT_NODEV))
+			pr_warn("No NAND device found\n");
+		chip->select_chip(mtd, -1);
+		return PTR_ERR(type);
+	}
+
+	/* Check for a chip array */
+	for (i = 1; i < maxchips; i++) {
+		chip->select_chip(mtd, i);
+		/* See comment in nand_get_flash_type for reset */
+		chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+		/* Send the command for reading device ID */
+		chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+		/* Read manufacturer and device IDs */
+		if (nand_maf_id != chip->read_byte(mtd) ||
+		    /*nand_dev_id != chip->read_byte(mtd))*/
+		    ((type->dwFlashID>>16)&0xFF) != chip->read_byte(mtd))
+			break;
+	}
+	if (i > 1)
+		pr_info("%d NAND chips detected\n", i);
+
+	/* Store the number of chips and calc total size for mtd */
+	chip->numchips = i;
+	mtd->size = i * chip->chipsize;
+
+	return 0;
+}
+EXPORT_SYMBOL(nand_scan_ident);
+
+
+/**
+ * nand_scan_tail - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ *
+ * This is the second phase of the normal nand_scan() function. It fills out
+ * all the uninitialized function pointers with the defaults and scans for a
+ * bad block table if appropriate.
+ */
+int nand_scan_tail(struct mtd_info *mtd)
+{
+	int i;
+	struct nand_chip *chip = mtd->priv;
+
+	/* New bad blocks should be marked in OOB, flash-based BBT, or both */
+	BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
+			!(chip->bbt_options & NAND_BBT_USE_FLASH));
+
+	if (!(chip->options & NAND_OWN_BUFFERS))
+		chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
+	if (!chip->buffers)
+		return -ENOMEM;
+
+	/* Set the internal oob buffer location, just after the page data */
+	chip->oob_poi = chip->buffers->databuf + mtd->writesize;
+
+	/*
+	 * If no default placement scheme is given, select an appropriate one.
+	 */
+	if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) {
+		switch (mtd->oobsize) {
+		case 8:
+			chip->ecc.layout = &nand_oob_8;
+			break;
+		case 16:
+			chip->ecc.layout = &nand_oob_16;
+			break;
+		case 64:
+			chip->ecc.layout = &nand_oob_64;
+			break;
+		case 128:
+			chip->ecc.layout = &nand_oob_128;
+			break;
+		default:
+			pr_warn("No oob scheme defined for oobsize %d\n",
+				   mtd->oobsize);
+			BUG();
+		}
+	}
+
+	if (!chip->write_page)
+		chip->write_page = nand_write_page;
+
+	/*
+	 * Check ECC mode, default to software if 3byte/512byte hardware ECC is
+	 * selected and we have 256 byte pagesize fallback to software ECC
+	 */
+
+	switch (chip->ecc.mode) {
+	case NAND_ECC_HW_OOB_FIRST:
+		/* Similar to NAND_ECC_HW, but a separate read_page handle */
+		if (!chip->ecc.calculate || !chip->ecc.correct ||
+		     !chip->ecc.hwctl) {
+			pr_warn("No ECC functions supplied; "
+				   "hardware ECC not possible\n");
+			BUG();
+		}
+		if (!chip->ecc.read_page)
+			chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+
+	case NAND_ECC_HW:
+		/* Use standard hwecc read page function? */
+		if (!chip->ecc.read_page)
+			chip->ecc.read_page = nand_read_page_hwecc;
+		if (!chip->ecc.write_page)
+			chip->ecc.write_page = nand_write_page_hwecc;
+		if (!chip->ecc.read_page_raw)
+			chip->ecc.read_page_raw = nand_read_page_raw;
+		if (!chip->ecc.write_page_raw)
+			chip->ecc.write_page_raw = nand_write_page_raw;
+		if (!chip->ecc.read_oob)
+			chip->ecc.read_oob = nand_read_oob_std;
+		if (!chip->ecc.write_oob)
+			chip->ecc.write_oob = nand_write_oob_std;
+
+	case NAND_ECC_HW_SYNDROME:
+		if ((!chip->ecc.calculate || !chip->ecc.correct ||
+		     !chip->ecc.hwctl) &&
+		    (!chip->ecc.read_page ||
+		     chip->ecc.read_page == nand_read_page_hwecc ||
+		     !chip->ecc.write_page ||
+		     chip->ecc.write_page == nand_write_page_hwecc)) {
+			pr_warn("No ECC functions supplied; "
+				   "hardware ECC not possible\n");
+			BUG();
+		}
+		/* Use standard syndrome read/write page function? */
+		if (!chip->ecc.read_page)
+			chip->ecc.read_page = nand_read_page_syndrome;
+		if (!chip->ecc.write_page)
+			chip->ecc.write_page = nand_write_page_syndrome;
+		if (!chip->ecc.read_page_raw)
+			chip->ecc.read_page_raw = nand_read_page_raw_syndrome;
+		if (!chip->ecc.write_page_raw)
+			chip->ecc.write_page_raw = nand_write_page_raw_syndrome;
+		if (!chip->ecc.read_oob)
+			chip->ecc.read_oob = nand_read_oob_syndrome;
+		if (!chip->ecc.write_oob)
+			chip->ecc.write_oob = nand_write_oob_syndrome;
+
+		if (mtd->writesize >= chip->ecc.size)
+			break;
+		pr_warn("%d byte HW ECC not possible on "
+			   "%d byte page size, fallback to SW ECC\n",
+			   chip->ecc.size, mtd->writesize);
+		chip->ecc.mode = NAND_ECC_SOFT;
+
+	case NAND_ECC_SOFT:
+		chip->ecc.calculate = nand_calculate_ecc;
+		chip->ecc.correct = nand_correct_data;
+		chip->ecc.read_page = nand_read_page_swecc;
+		chip->ecc.read_subpage = nand_read_subpage;
+		chip->ecc.write_page = nand_write_page_swecc;
+		chip->ecc.read_page_raw = nand_read_page_raw;
+		chip->ecc.write_page_raw = nand_write_page_raw;
+		chip->ecc.read_oob = nand_read_oob_std;
+		chip->ecc.write_oob = nand_write_oob_std;
+		if (!chip->ecc.size)
+			chip->ecc.size = 256;
+		chip->ecc.bytes = 3;
+		chip->ecc.strength = 1;
+		break;
+
+	case NAND_ECC_SOFT_BCH:
+		if (!mtd_nand_has_bch()) {
+			pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
+			BUG();
+		}
+		chip->ecc.calculate = nand_bch_calculate_ecc;
+		chip->ecc.correct = nand_bch_correct_data;
+		chip->ecc.read_page = nand_read_page_swecc;
+		chip->ecc.read_subpage = nand_read_subpage;
+		chip->ecc.write_page = nand_write_page_swecc;
+		chip->ecc.read_page_raw = nand_read_page_raw;
+		chip->ecc.write_page_raw = nand_write_page_raw;
+		chip->ecc.read_oob = nand_read_oob_std;
+		chip->ecc.write_oob = nand_write_oob_std;
+		/*
+		 * Board driver should supply ecc.size and ecc.bytes values to
+		 * select how many bits are correctable; see nand_bch_init()
+		 * for details. Otherwise, default to 4 bits for large page
+		 * devices.
+		 */
+		if (!chip->ecc.size && (mtd->oobsize >= 64)) {
+			chip->ecc.size = 512;
+			chip->ecc.bytes = 7;
+		}
+		chip->ecc.priv = nand_bch_init(mtd,
+					       chip->ecc.size,
+					       chip->ecc.bytes,
+					       &chip->ecc.layout);
+		if (!chip->ecc.priv) {
+			pr_warn("BCH ECC initialization failed!\n");
+			BUG();
+		}
+		chip->ecc.strength =
+			chip->ecc.bytes*8 / fls(8*chip->ecc.size);
+		break;
+
+	case NAND_ECC_NONE:
+		pr_warn("NAND_ECC_NONE selected by board driver. "
+			   "This is not recommended!\n");
+		chip->ecc.read_page = nand_read_page_raw;
+		chip->ecc.write_page = nand_write_page_raw;
+		chip->ecc.read_oob = nand_read_oob_std;
+		chip->ecc.read_page_raw = nand_read_page_raw;
+		chip->ecc.write_page_raw = nand_write_page_raw;
+		chip->ecc.write_oob = nand_write_oob_std;
+		chip->ecc.size = mtd->writesize;
+		chip->ecc.bytes = 0;
+		chip->ecc.strength = 0;
+		break;
+
+	default:
+		pr_warn("Invalid NAND_ECC_MODE %d\n", chip->ecc.mode);
+		BUG();
+	}
+
+	/* For many systems, the standard OOB write also works for raw */
+	if (!chip->ecc.read_oob_raw)
+		chip->ecc.read_oob_raw = chip->ecc.read_oob;
+	if (!chip->ecc.write_oob_raw)
+		chip->ecc.write_oob_raw = chip->ecc.write_oob;
+
+	/*
+	 * The number of bytes available for a client to place data into
+	 * the out of band area.
+	 */
+	chip->ecc.layout->oobavail = 0;
+	for (i = 0; chip->ecc.layout->oobfree[i].length
+			&& i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++)
+		chip->ecc.layout->oobavail +=
+			chip->ecc.layout->oobfree[i].length;
+	mtd->oobavail = chip->ecc.layout->oobavail;
+
+	/*
+	 * Set the number of read / write steps for one page depending on ECC
+	 * mode.
+	 */
+	chip->ecc.steps = mtd->writesize / chip->ecc.size;
+	if (chip->ecc.steps * chip->ecc.size != mtd->writesize) {
+		pr_warn("Invalid ECC parameters\n");
+		BUG();
+	}
+	chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
+
+	/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
+	if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
+	    !(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
+		switch (chip->ecc.steps) {
+		case 2:
+			mtd->subpage_sft = 1;
+			break;
+		case 4:
+		case 8:
+		case 16:
+			mtd->subpage_sft = 2;
+			break;
+		}
+	}
+	//chip->subpagesize = mtd->writesize >> mtd->subpage_sft;
+	if (mtd->dwECCBitNum >= 24)
+		chip->subpagesize = 1024;
+	else
+		chip->subpagesize = 512;
+
+	/* Initialize state */
+	chip->state = FL_READY;
+
+	/* De-select the device */
+	chip->select_chip(mtd, -1);
+
+	/* Invalidate the pagebuffer reference */
+	chip->pagebuf = -1;
+
+	/* Fill in remaining MTD driver data */
+	mtd->type = MTD_NANDFLASH;
+	mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
+						MTD_CAP_NANDFLASH;
+	mtd->_erase = nand_erase;
+	mtd->_point = NULL;
+	mtd->_unpoint = NULL;
+	mtd->_read = nand_read;
+	mtd->_write = nand_write;
+	mtd->_panic_write = panic_nand_write;
+	mtd->_read_oob = nand_read_oob;
+	mtd->_write_oob = nand_write_oob;
+	mtd->_sync = nand_sync;
+	mtd->_lock = NULL;
+	mtd->_unlock = NULL;
+	mtd->_suspend = nand_suspend;
+	mtd->_resume = nand_resume;
+	mtd->_block_isbad = nand_block_isbad;
+	mtd->_block_markbad = nand_block_markbad;
+	mtd->writebufsize = mtd->writesize;
+	mtd->get_para = get_para;
+
+	/* propagate ecc info to mtd_info */
+	mtd->ecclayout = chip->ecc.layout;
+	mtd->ecc_strength = chip->ecc.strength * chip->ecc.steps;
+
+  /* edwardwan add support 4 bits BCH ECC  */
+	mtd->read_bbinfo_facmk = nand_read_bbt_facmk;
+	/* Check, if we should skip the bad block table scan */
+	if (chip->options & NAND_SKIP_BBTSCAN)
+		return 0;
+
+	/* Build bad block table */
+	return chip->scan_bbt(mtd);
+}
+EXPORT_SYMBOL(nand_scan_tail);
+
+/*
+ * is_module_text_address() isn't exported, and it's mostly a pointless
+ * test if this is a module _anyway_ -- they'd have to try _really_ hard
+ * to call us from in-kernel code if the core NAND support is modular.
+ */
+#ifdef MODULE
+#define caller_is_module() (1)
+#else
+#define caller_is_module() \
+	is_module_text_address((unsigned long)__builtin_return_address(0))
+#endif
+
+/**
+ * nand_scan - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
+ *
+ * This fills out all the uninitialized function pointers with the defaults.
+ * The flash ID is read and the mtd/chip structures are filled with the
+ * appropriate values. The mtd->owner field must be set to the module of the
+ * caller.
+ */
+int nand_scan(struct mtd_info *mtd, int maxchips)
+{
+	int ret;
+	unsigned int ret1;
+
+	/* Many callers got this wrong, so check for it for a while... */
+	/*if (!mtd->owner && caller_is_module()) {
+		pr_crit("%s called with NULL mtd->owner!\n", __func__);
+		BUG();
+	}*/
+	ret1 = *(volatile unsigned long *)PMCEU_ADDR;
+	if (!(ret1&0x0010000))
+		printk(KERN_NOTICE "1 pmc_nand: 0x%x\n", ret1);
+	auto_pll_divisor(DEV_NAND, CLK_ENABLE, 0, 0);
+	ret1 = *(volatile unsigned long *)PMCEU_ADDR;
+	if (!(ret1&0x0010000))
+		printk(KERN_NOTICE "2 pmc_nand: 0x%x\n", ret1);
+	ret = nand_scan_ident(mtd, maxchips, NULL);
+	if (!ret)
+		ret = nand_scan_tail(mtd);
+	auto_pll_divisor(DEV_NAND, CLK_DISABLE, 0, 0);
+	ret1 = *(volatile unsigned long *)PMCEU_ADDR;
+	if (ret1&0x0010000)
+	printk(KERN_NOTICE "3 pmc_nand: 0x%x\n", ret1);
+	return ret;
+}
+EXPORT_SYMBOL(nand_scan);
+
+/**
+ * nand_release - [NAND Interface] Free resources held by the NAND device
+ * @mtd: MTD device structure
+ */
+void nand_release(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (chip->ecc.mode == NAND_ECC_SOFT_BCH)
+		nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
+
+	mtd_device_unregister(mtd);
+
+	/* Free bad block table memory */
+	kfree(chip->bbt);
+	if (!(chip->options & NAND_OWN_BUFFERS))
+		kfree(chip->buffers);
+
+	/* Free bad block descriptor memory */
+	if (chip->badblock_pattern && chip->badblock_pattern->options
+			& NAND_BBT_DYNAMICSTRUCT)
+		kfree(chip->badblock_pattern);
+}
+EXPORT_SYMBOL_GPL(nand_release);
+
+static int __init nand_base_init(void)
+{
+//	led_trigger_register_simple("nand-disk", &nand_led_trigger);
+	return 0;
+}
+
+static void __exit nand_base_exit(void)
+{
+//	led_trigger_unregister_simple(nand_led_trigger);
+}
+
+module_init(nand_base_init);
+module_exit(nand_base_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>");
+MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION("Generic NAND flash driver code");