Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 2227 insertions, 0 deletions

diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c
new file mode 100644
index 00000000..6d0fb2c8
--- /dev/null
+++ b/drivers/media/video/omap3isp/isppreview.c
@@ -0,0 +1,2227 @@
+/*
+ * isppreview.c
+ *
+ * TI OMAP3 ISP driver - Preview module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+#include "isp.h"
+#include "ispreg.h"
+#include "isppreview.h"
+
+/* Default values in Office Fluorescent Light for RGBtoRGB Blending */
+static struct omap3isp_prev_rgbtorgb flr_rgb2rgb = {
+	{	/* RGB-RGB Matrix */
+		{0x01E2, 0x0F30, 0x0FEE},
+		{0x0F9B, 0x01AC, 0x0FB9},
+		{0x0FE0, 0x0EC0, 0x0260}
+	},	/* RGB Offset */
+	{0x0000, 0x0000, 0x0000}
+};
+
+/* Default values in Office Fluorescent Light for RGB to YUV Conversion*/
+static struct omap3isp_prev_csc flr_prev_csc = {
+	{	/* CSC Coef Matrix */
+		{66, 129, 25},
+		{-38, -75, 112},
+		{112, -94 , -18}
+	},	/* CSC Offset */
+	{0x0, 0x0, 0x0}
+};
+
+/* Default values in Office Fluorescent Light for CFA Gradient*/
+#define FLR_CFA_GRADTHRS_HORZ	0x28
+#define FLR_CFA_GRADTHRS_VERT	0x28
+
+/* Default values in Office Fluorescent Light for Chroma Suppression*/
+#define FLR_CSUP_GAIN		0x0D
+#define FLR_CSUP_THRES		0xEB
+
+/* Default values in Office Fluorescent Light for Noise Filter*/
+#define FLR_NF_STRGTH		0x03
+
+/* Default values for White Balance */
+#define FLR_WBAL_DGAIN		0x100
+#define FLR_WBAL_COEF		0x20
+
+/* Default values in Office Fluorescent Light for Black Adjustment*/
+#define FLR_BLKADJ_BLUE		0x0
+#define FLR_BLKADJ_GREEN	0x0
+#define FLR_BLKADJ_RED		0x0
+
+#define DEF_DETECT_CORRECT_VAL	0xe
+
+/*
+ * Margins and image size limits.
+ *
+ * The preview engine crops several rows and columns internally depending on
+ * which filters are enabled. To avoid format changes when the filters are
+ * enabled or disabled (which would prevent them from being turned on or off
+ * during streaming), the driver assumes all the filters are enabled when
+ * computing sink crop and source format limits.
+ *
+ * If a filter is disabled, additional cropping is automatically added at the
+ * preview engine input by the driver to avoid overflow at line and frame end.
+ * This is completely transparent for applications.
+ *
+ * Median filter		4 pixels
+ * Noise filter,
+ * Faulty pixels correction	4 pixels, 4 lines
+ * CFA filter			4 pixels, 4 lines in Bayer mode
+ *					  2 lines in other modes
+ * Color suppression		2 pixels
+ * or luma enhancement
+ * -------------------------------------------------------------
+ * Maximum total		14 pixels, 8 lines
+ *
+ * The color suppression and luma enhancement filters are applied after bayer to
+ * YUV conversion. They thus can crop one pixel on the left and one pixel on the
+ * right side of the image without changing the color pattern. When both those
+ * filters are disabled, the driver must crop the two pixels on the same side of
+ * the image to avoid changing the bayer pattern. The left margin is thus set to
+ * 8 pixels and the right margin to 6 pixels.
+ */
+
+#define PREV_MARGIN_LEFT	8
+#define PREV_MARGIN_RIGHT	6
+#define PREV_MARGIN_TOP		4
+#define PREV_MARGIN_BOTTOM	4
+
+#define PREV_MIN_IN_WIDTH	64
+#define PREV_MIN_IN_HEIGHT	8
+#define PREV_MAX_IN_HEIGHT	16384
+
+#define PREV_MIN_OUT_WIDTH		0
+#define PREV_MIN_OUT_HEIGHT		0
+#define PREV_MAX_OUT_WIDTH_REV_1	1280
+#define PREV_MAX_OUT_WIDTH_REV_2	3300
+#define PREV_MAX_OUT_WIDTH_REV_15	4096
+
+/*
+ * Coeficient Tables for the submodules in Preview.
+ * Array is initialised with the values from.the tables text file.
+ */
+
+/*
+ * CFA Filter Coefficient Table
+ *
+ */
+static u32 cfa_coef_table[] = {
+#include "cfa_coef_table.h"
+};
+
+/*
+ * Default Gamma Correction Table - All components
+ */
+static u32 gamma_table[] = {
+#include "gamma_table.h"
+};
+
+/*
+ * Noise Filter Threshold table
+ */
+static u32 noise_filter_table[] = {
+#include "noise_filter_table.h"
+};
+
+/*
+ * Luminance Enhancement Table
+ */
+static u32 luma_enhance_table[] = {
+#include "luma_enhance_table.h"
+};
+
+/*
+ * preview_enable_invalaw - Enable/Disable Inverse A-Law module in Preview.
+ * @enable: 1 - Reverse the A-Law done in CCDC.
+ */
+static void
+preview_enable_invalaw(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW);
+}
+
+/*
+ * preview_enable_drkframe_capture - Enable/Disable of the darkframe capture.
+ * @prev -
+ * @enable: 1 - Enable, 0 - Disable
+ *
+ * NOTE: PRV_WSDR_ADDR and PRV_WADD_OFFSET must be set also
+ * The process is applied for each captured frame.
+ */
+static void
+preview_enable_drkframe_capture(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_DRKFCAP);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_DRKFCAP);
+}
+
+/*
+ * preview_enable_drkframe - Enable/Disable of the darkframe subtract.
+ * @enable: 1 - Acquires memory bandwidth since the pixels in each frame is
+ *          subtracted with the pixels in the current frame.
+ *
+ * The process is applied for each captured frame.
+ */
+static void
+preview_enable_drkframe(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_DRKFEN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_DRKFEN);
+}
+
+/*
+ * preview_config_drkf_shadcomp - Configures shift value in shading comp.
+ * @scomp_shtval: 3bit value of shift used in shading compensation.
+ */
+static void
+preview_config_drkf_shadcomp(struct isp_prev_device *prev,
+			     const void *scomp_shtval)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const u32 *shtval = scomp_shtval;
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			ISPPRV_PCR_SCOMP_SFT_MASK,
+			*shtval << ISPPRV_PCR_SCOMP_SFT_SHIFT);
+}
+
+/*
+ * preview_enable_hmed - Enables/Disables of the Horizontal Median Filter.
+ * @enable: 1 - Enables Horizontal Median Filter.
+ */
+static void
+preview_enable_hmed(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_HMEDEN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_HMEDEN);
+}
+
+/*
+ * preview_config_hmed - Configures the Horizontal Median Filter.
+ * @prev_hmed: Structure containing the odd and even distance between the
+ *             pixels in the image along with the filter threshold.
+ */
+static void
+preview_config_hmed(struct isp_prev_device *prev, const void *prev_hmed)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_hmed *hmed = prev_hmed;
+
+	isp_reg_writel(isp, (hmed->odddist == 1 ? 0 : ISPPRV_HMED_ODDDIST) |
+		       (hmed->evendist == 1 ? 0 : ISPPRV_HMED_EVENDIST) |
+		       (hmed->thres << ISPPRV_HMED_THRESHOLD_SHIFT),
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_HMED);
+}
+
+/*
+ * preview_config_noisefilter - Configures the Noise Filter.
+ * @prev_nf: Structure containing the noisefilter table, strength to be used
+ *           for the noise filter and the defect correction enable flag.
+ */
+static void
+preview_config_noisefilter(struct isp_prev_device *prev, const void *prev_nf)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_nf *nf = prev_nf;
+	unsigned int i;
+
+	isp_reg_writel(isp, nf->spread, OMAP3_ISP_IOMEM_PREV, ISPPRV_NF);
+	isp_reg_writel(isp, ISPPRV_NF_TABLE_ADDR,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+	for (i = 0; i < OMAP3ISP_PREV_NF_TBL_SIZE; i++) {
+		isp_reg_writel(isp, nf->table[i],
+			       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
+	}
+}
+
+/*
+ * preview_config_dcor - Configures the defect correction
+ * @prev_dcor: Structure containing the defect correct thresholds
+ */
+static void
+preview_config_dcor(struct isp_prev_device *prev, const void *prev_dcor)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_dcor *dcor = prev_dcor;
+
+	isp_reg_writel(isp, dcor->detect_correct[0],
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR0);
+	isp_reg_writel(isp, dcor->detect_correct[1],
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR1);
+	isp_reg_writel(isp, dcor->detect_correct[2],
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR2);
+	isp_reg_writel(isp, dcor->detect_correct[3],
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR3);
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			ISPPRV_PCR_DCCOUP,
+			dcor->couplet_mode_en ? ISPPRV_PCR_DCCOUP : 0);
+}
+
+/*
+ * preview_config_cfa - Configures the CFA Interpolation parameters.
+ * @prev_cfa: Structure containing the CFA interpolation table, CFA format
+ *            in the image, vertical and horizontal gradient threshold.
+ */
+static void
+preview_config_cfa(struct isp_prev_device *prev, const void *prev_cfa)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_cfa *cfa = prev_cfa;
+	unsigned int i;
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			ISPPRV_PCR_CFAFMT_MASK,
+			cfa->format << ISPPRV_PCR_CFAFMT_SHIFT);
+
+	isp_reg_writel(isp,
+		(cfa->gradthrs_vert << ISPPRV_CFA_GRADTH_VER_SHIFT) |
+		(cfa->gradthrs_horz << ISPPRV_CFA_GRADTH_HOR_SHIFT),
+		OMAP3_ISP_IOMEM_PREV, ISPPRV_CFA);
+
+	isp_reg_writel(isp, ISPPRV_CFA_TABLE_ADDR,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+
+	for (i = 0; i < OMAP3ISP_PREV_CFA_TBL_SIZE; i++) {
+		isp_reg_writel(isp, cfa->table[i],
+			       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
+	}
+}
+
+/*
+ * preview_config_gammacorrn - Configures the Gamma Correction table values
+ * @gtable: Structure containing the table for red, blue, green gamma table.
+ */
+static void
+preview_config_gammacorrn(struct isp_prev_device *prev, const void *gtable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_gtables *gt = gtable;
+	unsigned int i;
+
+	isp_reg_writel(isp, ISPPRV_REDGAMMA_TABLE_ADDR,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+	for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
+		isp_reg_writel(isp, gt->red[i], OMAP3_ISP_IOMEM_PREV,
+			       ISPPRV_SET_TBL_DATA);
+
+	isp_reg_writel(isp, ISPPRV_GREENGAMMA_TABLE_ADDR,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+	for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
+		isp_reg_writel(isp, gt->green[i], OMAP3_ISP_IOMEM_PREV,
+			       ISPPRV_SET_TBL_DATA);
+
+	isp_reg_writel(isp, ISPPRV_BLUEGAMMA_TABLE_ADDR,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+	for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
+		isp_reg_writel(isp, gt->blue[i], OMAP3_ISP_IOMEM_PREV,
+			       ISPPRV_SET_TBL_DATA);
+}
+
+/*
+ * preview_config_luma_enhancement - Sets the Luminance Enhancement table.
+ * @ytable: Structure containing the table for Luminance Enhancement table.
+ */
+static void
+preview_config_luma_enhancement(struct isp_prev_device *prev,
+				const void *ytable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_luma *yt = ytable;
+	unsigned int i;
+
+	isp_reg_writel(isp, ISPPRV_YENH_TABLE_ADDR,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+	for (i = 0; i < OMAP3ISP_PREV_YENH_TBL_SIZE; i++) {
+		isp_reg_writel(isp, yt->table[i],
+			       OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
+	}
+}
+
+/*
+ * preview_config_chroma_suppression - Configures the Chroma Suppression.
+ * @csup: Structure containing the threshold value for suppression
+ *        and the hypass filter enable flag.
+ */
+static void
+preview_config_chroma_suppression(struct isp_prev_device *prev,
+				  const void *csup)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_csup *cs = csup;
+
+	isp_reg_writel(isp,
+		       cs->gain | (cs->thres << ISPPRV_CSUP_THRES_SHIFT) |
+		       (cs->hypf_en << ISPPRV_CSUP_HPYF_SHIFT),
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_CSUP);
+}
+
+/*
+ * preview_enable_noisefilter - Enables/Disables the Noise Filter.
+ * @enable: 1 - Enables the Noise Filter.
+ */
+static void
+preview_enable_noisefilter(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_NFEN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_NFEN);
+}
+
+/*
+ * preview_enable_dcor - Enables/Disables the defect correction.
+ * @enable: 1 - Enables the defect correction.
+ */
+static void
+preview_enable_dcor(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_DCOREN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_DCOREN);
+}
+
+/*
+ * preview_enable_cfa - Enable/Disable the CFA Interpolation.
+ * @enable: 1 - Enables the CFA.
+ */
+static void
+preview_enable_cfa(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_CFAEN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_CFAEN);
+}
+
+/*
+ * preview_enable_gammabypass - Enables/Disables the GammaByPass
+ * @enable: 1 - Bypasses Gamma - 10bit input is cropped to 8MSB.
+ *          0 - Goes through Gamma Correction. input and output is 10bit.
+ */
+static void
+preview_enable_gammabypass(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_GAMMA_BYPASS);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_GAMMA_BYPASS);
+}
+
+/*
+ * preview_enable_luma_enhancement - Enables/Disables Luminance Enhancement
+ * @enable: 1 - Enable the Luminance Enhancement.
+ */
+static void
+preview_enable_luma_enhancement(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_YNENHEN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_YNENHEN);
+}
+
+/*
+ * preview_enable_chroma_suppression - Enables/Disables Chrominance Suppr.
+ * @enable: 1 - Enable the Chrominance Suppression.
+ */
+static void
+preview_enable_chroma_suppression(struct isp_prev_device *prev, u8 enable)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	if (enable)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_SUPEN);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_SUPEN);
+}
+
+/*
+ * preview_config_whitebalance - Configures the White Balance parameters.
+ * @prev_wbal: Structure containing the digital gain and white balance
+ *             coefficient.
+ *
+ * Coefficient matrix always with default values.
+ */
+static void
+preview_config_whitebalance(struct isp_prev_device *prev, const void *prev_wbal)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_wbal *wbal = prev_wbal;
+	u32 val;
+
+	isp_reg_writel(isp, wbal->dgain, OMAP3_ISP_IOMEM_PREV, ISPPRV_WB_DGAIN);
+
+	val = wbal->coef0 << ISPPRV_WBGAIN_COEF0_SHIFT;
+	val |= wbal->coef1 << ISPPRV_WBGAIN_COEF1_SHIFT;
+	val |= wbal->coef2 << ISPPRV_WBGAIN_COEF2_SHIFT;
+	val |= wbal->coef3 << ISPPRV_WBGAIN_COEF3_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_WBGAIN);
+
+	isp_reg_writel(isp,
+		       ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_0_SHIFT |
+		       ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_1_SHIFT |
+		       ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_2_SHIFT |
+		       ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_3_SHIFT |
+		       ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_0_SHIFT |
+		       ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_1_SHIFT |
+		       ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_2_SHIFT |
+		       ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_3_SHIFT |
+		       ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_0_SHIFT |
+		       ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_1_SHIFT |
+		       ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_2_SHIFT |
+		       ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_3_SHIFT |
+		       ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_0_SHIFT |
+		       ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_1_SHIFT |
+		       ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_2_SHIFT |
+		       ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_3_SHIFT,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_WBSEL);
+}
+
+/*
+ * preview_config_blkadj - Configures the Black Adjustment parameters.
+ * @prev_blkadj: Structure containing the black adjustment towards red, green,
+ *               blue.
+ */
+static void
+preview_config_blkadj(struct isp_prev_device *prev, const void *prev_blkadj)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_blkadj *blkadj = prev_blkadj;
+
+	isp_reg_writel(isp, (blkadj->blue << ISPPRV_BLKADJOFF_B_SHIFT) |
+		       (blkadj->green << ISPPRV_BLKADJOFF_G_SHIFT) |
+		       (blkadj->red << ISPPRV_BLKADJOFF_R_SHIFT),
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_BLKADJOFF);
+}
+
+/*
+ * preview_config_rgb_blending - Configures the RGB-RGB Blending matrix.
+ * @rgb2rgb: Structure containing the rgb to rgb blending matrix and the rgb
+ *           offset.
+ */
+static void
+preview_config_rgb_blending(struct isp_prev_device *prev, const void *rgb2rgb)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_rgbtorgb *rgbrgb = rgb2rgb;
+	u32 val;
+
+	val = (rgbrgb->matrix[0][0] & 0xfff) << ISPPRV_RGB_MAT1_MTX_RR_SHIFT;
+	val |= (rgbrgb->matrix[0][1] & 0xfff) << ISPPRV_RGB_MAT1_MTX_GR_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT1);
+
+	val = (rgbrgb->matrix[0][2] & 0xfff) << ISPPRV_RGB_MAT2_MTX_BR_SHIFT;
+	val |= (rgbrgb->matrix[1][0] & 0xfff) << ISPPRV_RGB_MAT2_MTX_RG_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT2);
+
+	val = (rgbrgb->matrix[1][1] & 0xfff) << ISPPRV_RGB_MAT3_MTX_GG_SHIFT;
+	val |= (rgbrgb->matrix[1][2] & 0xfff) << ISPPRV_RGB_MAT3_MTX_BG_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT3);
+
+	val = (rgbrgb->matrix[2][0] & 0xfff) << ISPPRV_RGB_MAT4_MTX_RB_SHIFT;
+	val |= (rgbrgb->matrix[2][1] & 0xfff) << ISPPRV_RGB_MAT4_MTX_GB_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT4);
+
+	val = (rgbrgb->matrix[2][2] & 0xfff) << ISPPRV_RGB_MAT5_MTX_BB_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT5);
+
+	val = (rgbrgb->offset[0] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFR_SHIFT;
+	val |= (rgbrgb->offset[1] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFG_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF1);
+
+	val = (rgbrgb->offset[2] & 0x3ff) << ISPPRV_RGB_OFF2_MTX_OFFB_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF2);
+}
+
+/*
+ * Configures the RGB-YCbYCr conversion matrix
+ * @prev_csc: Structure containing the RGB to YCbYCr matrix and the
+ *            YCbCr offset.
+ */
+static void
+preview_config_rgb_to_ycbcr(struct isp_prev_device *prev, const void *prev_csc)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_csc *csc = prev_csc;
+	u32 val;
+
+	val = (csc->matrix[0][0] & 0x3ff) << ISPPRV_CSC0_RY_SHIFT;
+	val |= (csc->matrix[0][1] & 0x3ff) << ISPPRV_CSC0_GY_SHIFT;
+	val |= (csc->matrix[0][2] & 0x3ff) << ISPPRV_CSC0_BY_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC0);
+
+	val = (csc->matrix[1][0] & 0x3ff) << ISPPRV_CSC1_RCB_SHIFT;
+	val |= (csc->matrix[1][1] & 0x3ff) << ISPPRV_CSC1_GCB_SHIFT;
+	val |= (csc->matrix[1][2] & 0x3ff) << ISPPRV_CSC1_BCB_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC1);
+
+	val = (csc->matrix[2][0] & 0x3ff) << ISPPRV_CSC2_RCR_SHIFT;
+	val |= (csc->matrix[2][1] & 0x3ff) << ISPPRV_CSC2_GCR_SHIFT;
+	val |= (csc->matrix[2][2] & 0x3ff) << ISPPRV_CSC2_BCR_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC2);
+
+	val = (csc->offset[0] & 0xff) << ISPPRV_CSC_OFFSET_Y_SHIFT;
+	val |= (csc->offset[1] & 0xff) << ISPPRV_CSC_OFFSET_CB_SHIFT;
+	val |= (csc->offset[2] & 0xff) << ISPPRV_CSC_OFFSET_CR_SHIFT;
+	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC_OFFSET);
+}
+
+/*
+ * preview_update_contrast - Updates the contrast.
+ * @contrast: Pointer to hold the current programmed contrast value.
+ *
+ * Value should be programmed before enabling the module.
+ */
+static void
+preview_update_contrast(struct isp_prev_device *prev, u8 contrast)
+{
+	struct prev_params *params = &prev->params;
+
+	if (params->contrast != (contrast * ISPPRV_CONTRAST_UNITS)) {
+		params->contrast = contrast * ISPPRV_CONTRAST_UNITS;
+		prev->update |= PREV_CONTRAST;
+	}
+}
+
+/*
+ * preview_config_contrast - Configures the Contrast.
+ * @params: Contrast value (u8 pointer, U8Q0 format).
+ *
+ * Value should be programmed before enabling the module.
+ */
+static void
+preview_config_contrast(struct isp_prev_device *prev, const void *params)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT,
+			0xff << ISPPRV_CNT_BRT_CNT_SHIFT,
+			*(u8 *)params << ISPPRV_CNT_BRT_CNT_SHIFT);
+}
+
+/*
+ * preview_update_brightness - Updates the brightness in preview module.
+ * @brightness: Pointer to hold the current programmed brightness value.
+ *
+ */
+static void
+preview_update_brightness(struct isp_prev_device *prev, u8 brightness)
+{
+	struct prev_params *params = &prev->params;
+
+	if (params->brightness != (brightness * ISPPRV_BRIGHT_UNITS)) {
+		params->brightness = brightness * ISPPRV_BRIGHT_UNITS;
+		prev->update |= PREV_BRIGHTNESS;
+	}
+}
+
+/*
+ * preview_config_brightness - Configures the brightness.
+ * @params: Brightness value (u8 pointer, U8Q0 format).
+ */
+static void
+preview_config_brightness(struct isp_prev_device *prev, const void *params)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT,
+			0xff << ISPPRV_CNT_BRT_BRT_SHIFT,
+			*(u8 *)params << ISPPRV_CNT_BRT_BRT_SHIFT);
+}
+
+/*
+ * preview_config_yc_range - Configures the max and min Y and C values.
+ * @yclimit: Structure containing the range of Y and C values.
+ */
+static void
+preview_config_yc_range(struct isp_prev_device *prev, const void *yclimit)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	const struct omap3isp_prev_yclimit *yc = yclimit;
+
+	isp_reg_writel(isp,
+		       yc->maxC << ISPPRV_SETUP_YC_MAXC_SHIFT |
+		       yc->maxY << ISPPRV_SETUP_YC_MAXY_SHIFT |
+		       yc->minC << ISPPRV_SETUP_YC_MINC_SHIFT |
+		       yc->minY << ISPPRV_SETUP_YC_MINY_SHIFT,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_SETUP_YC);
+}
+
+/* preview parameters update structure */
+struct preview_update {
+	int cfg_bit;
+	int feature_bit;
+	void (*config)(struct isp_prev_device *, const void *);
+	void (*enable)(struct isp_prev_device *, u8);
+};
+
+static struct preview_update update_attrs[] = {
+	{OMAP3ISP_PREV_LUMAENH, PREV_LUMA_ENHANCE,
+		preview_config_luma_enhancement,
+		preview_enable_luma_enhancement},
+	{OMAP3ISP_PREV_INVALAW, PREV_INVERSE_ALAW,
+		NULL,
+		preview_enable_invalaw},
+	{OMAP3ISP_PREV_HRZ_MED, PREV_HORZ_MEDIAN_FILTER,
+		preview_config_hmed,
+		preview_enable_hmed},
+	{OMAP3ISP_PREV_CFA, PREV_CFA,
+		preview_config_cfa,
+		preview_enable_cfa},
+	{OMAP3ISP_PREV_CHROMA_SUPP, PREV_CHROMA_SUPPRESS,
+		preview_config_chroma_suppression,
+		preview_enable_chroma_suppression},
+	{OMAP3ISP_PREV_WB, PREV_WB,
+		preview_config_whitebalance,
+		NULL},
+	{OMAP3ISP_PREV_BLKADJ, PREV_BLKADJ,
+		preview_config_blkadj,
+		NULL},
+	{OMAP3ISP_PREV_RGB2RGB, PREV_RGB2RGB,
+		preview_config_rgb_blending,
+		NULL},
+	{OMAP3ISP_PREV_COLOR_CONV, PREV_COLOR_CONV,
+		preview_config_rgb_to_ycbcr,
+		NULL},
+	{OMAP3ISP_PREV_YC_LIMIT, PREV_YCLIMITS,
+		preview_config_yc_range,
+		NULL},
+	{OMAP3ISP_PREV_DEFECT_COR, PREV_DEFECT_COR,
+		preview_config_dcor,
+		preview_enable_dcor},
+	{OMAP3ISP_PREV_GAMMABYPASS, PREV_GAMMA_BYPASS,
+		NULL,
+		preview_enable_gammabypass},
+	{OMAP3ISP_PREV_DRK_FRM_CAPTURE, PREV_DARK_FRAME_CAPTURE,
+		NULL,
+		preview_enable_drkframe_capture},
+	{OMAP3ISP_PREV_DRK_FRM_SUBTRACT, PREV_DARK_FRAME_SUBTRACT,
+		NULL,
+		preview_enable_drkframe},
+	{OMAP3ISP_PREV_LENS_SHADING, PREV_LENS_SHADING,
+		preview_config_drkf_shadcomp,
+		preview_enable_drkframe},
+	{OMAP3ISP_PREV_NF, PREV_NOISE_FILTER,
+		preview_config_noisefilter,
+		preview_enable_noisefilter},
+	{OMAP3ISP_PREV_GAMMA, PREV_GAMMA,
+		preview_config_gammacorrn,
+		NULL},
+	{-1, PREV_CONTRAST,
+		preview_config_contrast,
+		NULL},
+	{-1, PREV_BRIGHTNESS,
+		preview_config_brightness,
+		NULL},
+};
+
+/*
+ * __preview_get_ptrs - helper function which return pointers to members
+ *                         of params and config structures.
+ * @params - pointer to preview_params structure.
+ * @param - return pointer to appropriate structure field.
+ * @configs - pointer to update config structure.
+ * @config - return pointer to appropriate structure field.
+ * @bit - for which feature to return pointers.
+ * Return size of corresponding prev_params member
+ */
+static u32
+__preview_get_ptrs(struct prev_params *params, void **param,
+		   struct omap3isp_prev_update_config *configs,
+		   void __user **config, u32 bit)
+{
+#define CHKARG(cfgs, cfg, field)				\
+	if (cfgs && cfg) {					\
+		*(cfg) = (cfgs)->field;				\
+	}
+
+	switch (bit) {
+	case PREV_HORZ_MEDIAN_FILTER:
+		*param = &params->hmed;
+		CHKARG(configs, config, hmed)
+		return sizeof(params->hmed);
+	case PREV_NOISE_FILTER:
+		*param = &params->nf;
+		CHKARG(configs, config, nf)
+		return sizeof(params->nf);
+		break;
+	case PREV_CFA:
+		*param = &params->cfa;
+		CHKARG(configs, config, cfa)
+		return sizeof(params->cfa);
+	case PREV_LUMA_ENHANCE:
+		*param = &params->luma;
+		CHKARG(configs, config, luma)
+		return sizeof(params->luma);
+	case PREV_CHROMA_SUPPRESS:
+		*param = &params->csup;
+		CHKARG(configs, config, csup)
+		return sizeof(params->csup);
+	case PREV_DEFECT_COR:
+		*param = &params->dcor;
+		CHKARG(configs, config, dcor)
+		return sizeof(params->dcor);
+	case PREV_BLKADJ:
+		*param = &params->blk_adj;
+		CHKARG(configs, config, blkadj)
+		return sizeof(params->blk_adj);
+	case PREV_YCLIMITS:
+		*param = &params->yclimit;
+		CHKARG(configs, config, yclimit)
+		return sizeof(params->yclimit);
+	case PREV_RGB2RGB:
+		*param = &params->rgb2rgb;
+		CHKARG(configs, config, rgb2rgb)
+		return sizeof(params->rgb2rgb);
+	case PREV_COLOR_CONV:
+		*param = &params->rgb2ycbcr;
+		CHKARG(configs, config, csc)
+		return sizeof(params->rgb2ycbcr);
+	case PREV_WB:
+		*param = &params->wbal;
+		CHKARG(configs, config, wbal)
+		return sizeof(params->wbal);
+	case PREV_GAMMA:
+		*param = &params->gamma;
+		CHKARG(configs, config, gamma)
+		return sizeof(params->gamma);
+	case PREV_CONTRAST:
+		*param = &params->contrast;
+		return 0;
+	case PREV_BRIGHTNESS:
+		*param = &params->brightness;
+		return 0;
+	default:
+		*param = NULL;
+		*config = NULL;
+		break;
+	}
+	return 0;
+}
+
+/*
+ * preview_config - Copy and update local structure with userspace preview
+ *                  configuration.
+ * @prev: ISP preview engine
+ * @cfg: Configuration
+ *
+ * Return zero if success or -EFAULT if the configuration can't be copied from
+ * userspace.
+ */
+static int preview_config(struct isp_prev_device *prev,
+			  struct omap3isp_prev_update_config *cfg)
+{
+	struct prev_params *params;
+	struct preview_update *attr;
+	int i, bit, rval = 0;
+
+	params = &prev->params;
+
+	if (prev->state != ISP_PIPELINE_STREAM_STOPPED) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&prev->lock, flags);
+		prev->shadow_update = 1;
+		spin_unlock_irqrestore(&prev->lock, flags);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(update_attrs); i++) {
+		attr = &update_attrs[i];
+		bit = 0;
+
+		if (!(cfg->update & attr->cfg_bit))
+			continue;
+
+		bit = cfg->flag & attr->cfg_bit;
+		if (bit) {
+			void *to = NULL, __user *from = NULL;
+			unsigned long sz = 0;
+
+			sz = __preview_get_ptrs(params, &to, cfg, &from,
+						   bit);
+			if (to && from && sz) {
+				if (copy_from_user(to, from, sz)) {
+					rval = -EFAULT;
+					break;
+				}
+			}
+			params->features |= attr->feature_bit;
+		} else {
+			params->features &= ~attr->feature_bit;
+		}
+
+		prev->update |= attr->feature_bit;
+	}
+
+	prev->shadow_update = 0;
+	return rval;
+}
+
+/*
+ * preview_setup_hw - Setup preview registers and/or internal memory
+ * @prev: pointer to preview private structure
+ * Note: can be called from interrupt context
+ * Return none
+ */
+static void preview_setup_hw(struct isp_prev_device *prev)
+{
+	struct prev_params *params = &prev->params;
+	struct preview_update *attr;
+	int i, bit;
+	void *param_ptr;
+
+	for (i = 0; i < ARRAY_SIZE(update_attrs); i++) {
+		attr = &update_attrs[i];
+
+		if (!(prev->update & attr->feature_bit))
+			continue;
+		bit = params->features & attr->feature_bit;
+		if (bit) {
+			if (attr->config) {
+				__preview_get_ptrs(params, &param_ptr, NULL,
+						      NULL, bit);
+				attr->config(prev, param_ptr);
+			}
+			if (attr->enable)
+				attr->enable(prev, 1);
+		} else
+			if (attr->enable)
+				attr->enable(prev, 0);
+
+		prev->update &= ~attr->feature_bit;
+	}
+}
+
+/*
+ * preview_config_ycpos - Configure byte layout of YUV image.
+ * @mode: Indicates the required byte layout.
+ */
+static void
+preview_config_ycpos(struct isp_prev_device *prev,
+		     enum v4l2_mbus_pixelcode pixelcode)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	enum preview_ycpos_mode mode;
+
+	switch (pixelcode) {
+	case V4L2_MBUS_FMT_YUYV8_1X16:
+		mode = YCPOS_CrYCbY;
+		break;
+	case V4L2_MBUS_FMT_UYVY8_1X16:
+		mode = YCPOS_YCrYCb;
+		break;
+	default:
+		return;
+	}
+
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			ISPPRV_PCR_YCPOS_CrYCbY,
+			mode << ISPPRV_PCR_YCPOS_SHIFT);
+}
+
+/*
+ * preview_config_averager - Enable / disable / configure averager
+ * @average: Average value to be configured.
+ */
+static void preview_config_averager(struct isp_prev_device *prev, u8 average)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	int reg = 0;
+
+	if (prev->params.cfa.format == OMAP3ISP_CFAFMT_BAYER)
+		reg = ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT |
+		      ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT |
+		      average;
+	else if (prev->params.cfa.format == OMAP3ISP_CFAFMT_RGBFOVEON)
+		reg = ISPPRV_AVE_EVENDIST_3 << ISPPRV_AVE_EVENDIST_SHIFT |
+		      ISPPRV_AVE_ODDDIST_3 << ISPPRV_AVE_ODDDIST_SHIFT |
+		      average;
+	isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE);
+}
+
+/*
+ * preview_config_input_size - Configure the input frame size
+ *
+ * The preview engine crops several rows and columns internally depending on
+ * which processing blocks are enabled. The driver assumes all those blocks are
+ * enabled when reporting source pad formats to userspace. If this assumption is
+ * not true, rows and columns must be manually cropped at the preview engine
+ * input to avoid overflows at the end of lines and frames.
+ *
+ * See the explanation at the PREV_MARGIN_* definitions for more details.
+ */
+static void preview_config_input_size(struct isp_prev_device *prev)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	struct prev_params *params = &prev->params;
+	unsigned int sph = prev->crop.left;
+	unsigned int eph = prev->crop.left + prev->crop.width - 1;
+	unsigned int slv = prev->crop.top;
+	unsigned int elv = prev->crop.top + prev->crop.height - 1;
+
+	if (params->features & PREV_CFA) {
+		sph -= 2;
+		eph += 2;
+		slv -= 2;
+		elv += 2;
+	}
+	if (params->features & (PREV_DEFECT_COR | PREV_NOISE_FILTER)) {
+		sph -= 2;
+		eph += 2;
+		slv -= 2;
+		elv += 2;
+	}
+	if (params->features & PREV_HORZ_MEDIAN_FILTER) {
+		sph -= 2;
+		eph += 2;
+	}
+	if (params->features & (PREV_CHROMA_SUPPRESS | PREV_LUMA_ENHANCE))
+		sph -= 2;
+
+	isp_reg_writel(isp, (sph << ISPPRV_HORZ_INFO_SPH_SHIFT) | eph,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO);
+	isp_reg_writel(isp, (slv << ISPPRV_VERT_INFO_SLV_SHIFT) | elv,
+		       OMAP3_ISP_IOMEM_PREV, ISPPRV_VERT_INFO);
+}
+
+/*
+ * preview_config_inlineoffset - Configures the Read address line offset.
+ * @prev: Preview module
+ * @offset: Line offset
+ *
+ * According to the TRM, the line offset must be aligned on a 32 bytes boundary.
+ * However, a hardware bug requires the memory start address to be aligned on a
+ * 64 bytes boundary, so the offset probably should be aligned on 64 bytes as
+ * well.
+ */
+static void
+preview_config_inlineoffset(struct isp_prev_device *prev, u32 offset)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV,
+		       ISPPRV_RADR_OFFSET);
+}
+
+/*
+ * preview_set_inaddr - Sets memory address of input frame.
+ * @addr: 32bit memory address aligned on 32byte boundary.
+ *
+ * Configures the memory address from which the input frame is to be read.
+ */
+static void preview_set_inaddr(struct isp_prev_device *prev, u32 addr)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_RSDR_ADDR);
+}
+
+/*
+ * preview_config_outlineoffset - Configures the Write address line offset.
+ * @offset: Line Offset for the preview output.
+ *
+ * The offset must be a multiple of 32 bytes.
+ */
+static void preview_config_outlineoffset(struct isp_prev_device *prev,
+				    u32 offset)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV,
+		       ISPPRV_WADD_OFFSET);
+}
+
+/*
+ * preview_set_outaddr - Sets the memory address to store output frame
+ * @addr: 32bit memory address aligned on 32byte boundary.
+ *
+ * Configures the memory address to which the output frame is written.
+ */
+static void preview_set_outaddr(struct isp_prev_device *prev, u32 addr)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_WSDR_ADDR);
+}
+
+static void preview_adjust_bandwidth(struct isp_prev_device *prev)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity);
+	struct isp_device *isp = to_isp_device(prev);
+	const struct v4l2_mbus_framefmt *ifmt = &prev->formats[PREV_PAD_SINK];
+	unsigned long l3_ick = pipe->l3_ick;
+	struct v4l2_fract *timeperframe;
+	unsigned int cycles_per_frame;
+	unsigned int requests_per_frame;
+	unsigned int cycles_per_request;
+	unsigned int minimum;
+	unsigned int maximum;
+	unsigned int value;
+
+	if (prev->input != PREVIEW_INPUT_MEMORY) {
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP,
+			    ISPSBL_SDR_REQ_PRV_EXP_MASK);
+		return;
+	}
+
+	/* Compute the minimum number of cycles per request, based on the
+	 * pipeline maximum data rate. This is an absolute lower bound if we
+	 * don't want SBL overflows, so round the value up.
+	 */
+	cycles_per_request = div_u64((u64)l3_ick / 2 * 256 + pipe->max_rate - 1,
+				     pipe->max_rate);
+	minimum = DIV_ROUND_UP(cycles_per_request, 32);
+
+	/* Compute the maximum number of cycles per request, based on the
+	 * requested frame rate. This is a soft upper bound to achieve a frame
+	 * rate equal or higher than the requested value, so round the value
+	 * down.
+	 */
+	timeperframe = &pipe->max_timeperframe;
+
+	requests_per_frame = DIV_ROUND_UP(ifmt->width * 2, 256) * ifmt->height;
+	cycles_per_frame = div_u64((u64)l3_ick * timeperframe->numerator,
+				   timeperframe->denominator);
+	cycles_per_request = cycles_per_frame / requests_per_frame;
+
+	maximum = cycles_per_request / 32;
+
+	value = max(minimum, maximum);
+
+	dev_dbg(isp->dev, "%s: cycles per request = %u\n", __func__, value);
+	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP,
+			ISPSBL_SDR_REQ_PRV_EXP_MASK,
+			value << ISPSBL_SDR_REQ_PRV_EXP_SHIFT);
+}
+
+/*
+ * omap3isp_preview_busy - Gets busy state of preview module.
+ */
+int omap3isp_preview_busy(struct isp_prev_device *prev)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	return isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR)
+		& ISPPRV_PCR_BUSY;
+}
+
+/*
+ * omap3isp_preview_restore_context - Restores the values of preview registers
+ */
+void omap3isp_preview_restore_context(struct isp_device *isp)
+{
+	isp->isp_prev.update = PREV_FEATURES_END - 1;
+	preview_setup_hw(&isp->isp_prev);
+}
+
+/*
+ * preview_print_status - Dump preview module registers to the kernel log
+ */
+#define PREV_PRINT_REGISTER(isp, name)\
+	dev_dbg(isp->dev, "###PRV " #name "=0x%08x\n", \
+		isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_##name))
+
+static void preview_print_status(struct isp_prev_device *prev)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	dev_dbg(isp->dev, "-------------Preview Register dump----------\n");
+
+	PREV_PRINT_REGISTER(isp, PCR);
+	PREV_PRINT_REGISTER(isp, HORZ_INFO);
+	PREV_PRINT_REGISTER(isp, VERT_INFO);
+	PREV_PRINT_REGISTER(isp, RSDR_ADDR);
+	PREV_PRINT_REGISTER(isp, RADR_OFFSET);
+	PREV_PRINT_REGISTER(isp, DSDR_ADDR);
+	PREV_PRINT_REGISTER(isp, DRKF_OFFSET);
+	PREV_PRINT_REGISTER(isp, WSDR_ADDR);
+	PREV_PRINT_REGISTER(isp, WADD_OFFSET);
+	PREV_PRINT_REGISTER(isp, AVE);
+	PREV_PRINT_REGISTER(isp, HMED);
+	PREV_PRINT_REGISTER(isp, NF);
+	PREV_PRINT_REGISTER(isp, WB_DGAIN);
+	PREV_PRINT_REGISTER(isp, WBGAIN);
+	PREV_PRINT_REGISTER(isp, WBSEL);
+	PREV_PRINT_REGISTER(isp, CFA);
+	PREV_PRINT_REGISTER(isp, BLKADJOFF);
+	PREV_PRINT_REGISTER(isp, RGB_MAT1);
+	PREV_PRINT_REGISTER(isp, RGB_MAT2);
+	PREV_PRINT_REGISTER(isp, RGB_MAT3);
+	PREV_PRINT_REGISTER(isp, RGB_MAT4);
+	PREV_PRINT_REGISTER(isp, RGB_MAT5);
+	PREV_PRINT_REGISTER(isp, RGB_OFF1);
+	PREV_PRINT_REGISTER(isp, RGB_OFF2);
+	PREV_PRINT_REGISTER(isp, CSC0);
+	PREV_PRINT_REGISTER(isp, CSC1);
+	PREV_PRINT_REGISTER(isp, CSC2);
+	PREV_PRINT_REGISTER(isp, CSC_OFFSET);
+	PREV_PRINT_REGISTER(isp, CNT_BRT);
+	PREV_PRINT_REGISTER(isp, CSUP);
+	PREV_PRINT_REGISTER(isp, SETUP_YC);
+	PREV_PRINT_REGISTER(isp, SET_TBL_ADDR);
+	PREV_PRINT_REGISTER(isp, CDC_THR0);
+	PREV_PRINT_REGISTER(isp, CDC_THR1);
+	PREV_PRINT_REGISTER(isp, CDC_THR2);
+	PREV_PRINT_REGISTER(isp, CDC_THR3);
+
+	dev_dbg(isp->dev, "--------------------------------------------\n");
+}
+
+/*
+ * preview_init_params - init image processing parameters.
+ * @prev: pointer to previewer private structure
+ * return none
+ */
+static void preview_init_params(struct isp_prev_device *prev)
+{
+	struct prev_params *params = &prev->params;
+	int i = 0;
+
+	/* Init values */
+	params->contrast = ISPPRV_CONTRAST_DEF * ISPPRV_CONTRAST_UNITS;
+	params->brightness = ISPPRV_BRIGHT_DEF * ISPPRV_BRIGHT_UNITS;
+	params->cfa.format = OMAP3ISP_CFAFMT_BAYER;
+	memcpy(params->cfa.table, cfa_coef_table,
+	       sizeof(params->cfa.table));
+	params->cfa.gradthrs_horz = FLR_CFA_GRADTHRS_HORZ;
+	params->cfa.gradthrs_vert = FLR_CFA_GRADTHRS_VERT;
+	params->csup.gain = FLR_CSUP_GAIN;
+	params->csup.thres = FLR_CSUP_THRES;
+	params->csup.hypf_en = 0;
+	memcpy(params->luma.table, luma_enhance_table,
+	       sizeof(params->luma.table));
+	params->nf.spread = FLR_NF_STRGTH;
+	memcpy(params->nf.table, noise_filter_table, sizeof(params->nf.table));
+	params->dcor.couplet_mode_en = 1;
+	for (i = 0; i < OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS; i++)
+		params->dcor.detect_correct[i] = DEF_DETECT_CORRECT_VAL;
+	memcpy(params->gamma.blue, gamma_table, sizeof(params->gamma.blue));
+	memcpy(params->gamma.green, gamma_table, sizeof(params->gamma.green));
+	memcpy(params->gamma.red, gamma_table, sizeof(params->gamma.red));
+	params->wbal.dgain = FLR_WBAL_DGAIN;
+	params->wbal.coef0 = FLR_WBAL_COEF;
+	params->wbal.coef1 = FLR_WBAL_COEF;
+	params->wbal.coef2 = FLR_WBAL_COEF;
+	params->wbal.coef3 = FLR_WBAL_COEF;
+	params->blk_adj.red = FLR_BLKADJ_RED;
+	params->blk_adj.green = FLR_BLKADJ_GREEN;
+	params->blk_adj.blue = FLR_BLKADJ_BLUE;
+	params->rgb2rgb = flr_rgb2rgb;
+	params->rgb2ycbcr = flr_prev_csc;
+	params->yclimit.minC = ISPPRV_YC_MIN;
+	params->yclimit.maxC = ISPPRV_YC_MAX;
+	params->yclimit.minY = ISPPRV_YC_MIN;
+	params->yclimit.maxY = ISPPRV_YC_MAX;
+
+	params->features = PREV_CFA | PREV_DEFECT_COR | PREV_NOISE_FILTER
+			 | PREV_GAMMA | PREV_BLKADJ | PREV_YCLIMITS
+			 | PREV_RGB2RGB | PREV_COLOR_CONV | PREV_WB
+			 | PREV_BRIGHTNESS | PREV_CONTRAST;
+
+	prev->update = PREV_FEATURES_END - 1;
+}
+
+/*
+ * preview_max_out_width - Handle previewer hardware ouput limitations
+ * @isp_revision : ISP revision
+ * returns maximum width output for current isp revision
+ */
+static unsigned int preview_max_out_width(struct isp_prev_device *prev)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	switch (isp->revision) {
+	case ISP_REVISION_1_0:
+		return PREV_MAX_OUT_WIDTH_REV_1;
+
+	case ISP_REVISION_2_0:
+	default:
+		return PREV_MAX_OUT_WIDTH_REV_2;
+
+	case ISP_REVISION_15_0:
+		return PREV_MAX_OUT_WIDTH_REV_15;
+	}
+}
+
+static void preview_configure(struct isp_prev_device *prev)
+{
+	struct isp_device *isp = to_isp_device(prev);
+	struct v4l2_mbus_framefmt *format;
+
+	preview_setup_hw(prev);
+
+	if (prev->output & PREVIEW_OUTPUT_MEMORY)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_SDRPORT);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_SDRPORT);
+
+	if (prev->output & PREVIEW_OUTPUT_RESIZER)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_RSZPORT);
+	else
+		isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_RSZPORT);
+
+	/* PREV_PAD_SINK */
+	format = &prev->formats[PREV_PAD_SINK];
+
+	preview_adjust_bandwidth(prev);
+
+	preview_config_input_size(prev);
+
+	if (prev->input == PREVIEW_INPUT_CCDC)
+		preview_config_inlineoffset(prev, 0);
+	else
+		preview_config_inlineoffset(prev,
+				ALIGN(format->width, 0x20) * 2);
+
+	/* PREV_PAD_SOURCE */
+	format = &prev->formats[PREV_PAD_SOURCE];
+
+	if (prev->output & PREVIEW_OUTPUT_MEMORY)
+		preview_config_outlineoffset(prev,
+				ALIGN(format->width, 0x10) * 2);
+
+	preview_config_averager(prev, 0);
+	preview_config_ycpos(prev, format->code);
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt handling
+ */
+
+static void preview_enable_oneshot(struct isp_prev_device *prev)
+{
+	struct isp_device *isp = to_isp_device(prev);
+
+	/* The PCR.SOURCE bit is automatically reset to 0 when the PCR.ENABLE
+	 * bit is set. As the preview engine is used in single-shot mode, we
+	 * need to set PCR.SOURCE before enabling the preview engine.
+	 */
+	if (prev->input == PREVIEW_INPUT_MEMORY)
+		isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+			    ISPPRV_PCR_SOURCE);
+
+	isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+		    ISPPRV_PCR_EN | ISPPRV_PCR_ONESHOT);
+}
+
+void omap3isp_preview_isr_frame_sync(struct isp_prev_device *prev)
+{
+	/*
+	 * If ISP_VIDEO_DMAQUEUE_QUEUED is set, DMA queue had an underrun
+	 * condition, the module was paused and now we have a buffer queued
+	 * on the output again. Restart the pipeline if running in continuous
+	 * mode.
+	 */
+	if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS &&
+	    prev->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED) {
+		preview_enable_oneshot(prev);
+		isp_video_dmaqueue_flags_clr(&prev->video_out);
+	}
+}
+
+static void preview_isr_buffer(struct isp_prev_device *prev)
+{
+	struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity);
+	struct isp_buffer *buffer;
+	int restart = 0;
+
+	if (prev->input == PREVIEW_INPUT_MEMORY) {
+		buffer = omap3isp_video_buffer_next(&prev->video_in);
+		if (buffer != NULL)
+			preview_set_inaddr(prev, buffer->isp_addr);
+		pipe->state |= ISP_PIPELINE_IDLE_INPUT;
+	}
+
+	if (prev->output & PREVIEW_OUTPUT_MEMORY) {
+		buffer = omap3isp_video_buffer_next(&prev->video_out);
+		if (buffer != NULL) {
+			preview_set_outaddr(prev, buffer->isp_addr);
+			restart = 1;
+		}
+		pipe->state |= ISP_PIPELINE_IDLE_OUTPUT;
+	}
+
+	switch (prev->state) {
+	case ISP_PIPELINE_STREAM_SINGLESHOT:
+		if (isp_pipeline_ready(pipe))
+			omap3isp_pipeline_set_stream(pipe,
+						ISP_PIPELINE_STREAM_SINGLESHOT);
+		break;
+
+	case ISP_PIPELINE_STREAM_CONTINUOUS:
+		/* If an underrun occurs, the video queue operation handler will
+		 * restart the preview engine. Otherwise restart it immediately.
+		 */
+		if (restart)
+			preview_enable_oneshot(prev);
+		break;
+
+	case ISP_PIPELINE_STREAM_STOPPED:
+	default:
+		return;
+	}
+}
+
+/*
+ * omap3isp_preview_isr - ISP preview engine interrupt handler
+ *
+ * Manage the preview engine video buffers and configure shadowed registers.
+ */
+void omap3isp_preview_isr(struct isp_prev_device *prev)
+{
+	unsigned long flags;
+
+	if (omap3isp_module_sync_is_stopping(&prev->wait, &prev->stopping))
+		return;
+
+	spin_lock_irqsave(&prev->lock, flags);
+	if (prev->shadow_update)
+		goto done;
+
+	preview_setup_hw(prev);
+	preview_config_input_size(prev);
+
+done:
+	spin_unlock_irqrestore(&prev->lock, flags);
+
+	if (prev->input == PREVIEW_INPUT_MEMORY ||
+	    prev->output & PREVIEW_OUTPUT_MEMORY)
+		preview_isr_buffer(prev);
+	else if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS)
+		preview_enable_oneshot(prev);
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP video operations
+ */
+
+static int preview_video_queue(struct isp_video *video,
+			       struct isp_buffer *buffer)
+{
+	struct isp_prev_device *prev = &video->isp->isp_prev;
+
+	if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
+		preview_set_inaddr(prev, buffer->isp_addr);
+
+	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		preview_set_outaddr(prev, buffer->isp_addr);
+
+	return 0;
+}
+
+static const struct isp_video_operations preview_video_ops = {
+	.queue = preview_video_queue,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+/*
+ * preview_s_ctrl - Handle set control subdev method
+ * @ctrl: pointer to v4l2 control structure
+ */
+static int preview_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct isp_prev_device *prev =
+		container_of(ctrl->handler, struct isp_prev_device, ctrls);
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		preview_update_brightness(prev, ctrl->val);
+		break;
+	case V4L2_CID_CONTRAST:
+		preview_update_contrast(prev, ctrl->val);
+		break;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops preview_ctrl_ops = {
+	.s_ctrl = preview_s_ctrl,
+};
+
+/*
+ * preview_ioctl - Handle preview module private ioctl's
+ * @prev: pointer to preview context structure
+ * @cmd: configuration command
+ * @arg: configuration argument
+ * return -EINVAL or zero on success
+ */
+static long preview_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+
+	switch (cmd) {
+	case VIDIOC_OMAP3ISP_PRV_CFG:
+		return preview_config(prev, arg);
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+/*
+ * preview_set_stream - Enable/Disable streaming on preview subdev
+ * @sd    : pointer to v4l2 subdev structure
+ * @enable: 1 == Enable, 0 == Disable
+ * return -EINVAL or zero on success
+ */
+static int preview_set_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+	struct isp_video *video_out = &prev->video_out;
+	struct isp_device *isp = to_isp_device(prev);
+	struct device *dev = to_device(prev);
+	unsigned long flags;
+
+	if (prev->state == ISP_PIPELINE_STREAM_STOPPED) {
+		if (enable == ISP_PIPELINE_STREAM_STOPPED)
+			return 0;
+
+		omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_PREVIEW);
+		preview_configure(prev);
+		atomic_set(&prev->stopping, 0);
+		preview_print_status(prev);
+	}
+
+	switch (enable) {
+	case ISP_PIPELINE_STREAM_CONTINUOUS:
+		if (prev->output & PREVIEW_OUTPUT_MEMORY)
+			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
+
+		if (video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED ||
+		    !(prev->output & PREVIEW_OUTPUT_MEMORY))
+			preview_enable_oneshot(prev);
+
+		isp_video_dmaqueue_flags_clr(video_out);
+		break;
+
+	case ISP_PIPELINE_STREAM_SINGLESHOT:
+		if (prev->input == PREVIEW_INPUT_MEMORY)
+			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_READ);
+		if (prev->output & PREVIEW_OUTPUT_MEMORY)
+			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
+
+		preview_enable_oneshot(prev);
+		break;
+
+	case ISP_PIPELINE_STREAM_STOPPED:
+		if (omap3isp_module_sync_idle(&sd->entity, &prev->wait,
+					      &prev->stopping))
+			dev_dbg(dev, "%s: stop timeout.\n", sd->name);
+		spin_lock_irqsave(&prev->lock, flags);
+		omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_READ);
+		omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
+		omap3isp_subclk_disable(isp, OMAP3_ISP_SUBCLK_PREVIEW);
+		spin_unlock_irqrestore(&prev->lock, flags);
+		isp_video_dmaqueue_flags_clr(video_out);
+		break;
+	}
+
+	prev->state = enable;
+	return 0;
+}
+
+static struct v4l2_mbus_framefmt *
+__preview_get_format(struct isp_prev_device *prev, struct v4l2_subdev_fh *fh,
+		     unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_format(fh, pad);
+	else
+		return &prev->formats[pad];
+}
+
+static struct v4l2_rect *
+__preview_get_crop(struct isp_prev_device *prev, struct v4l2_subdev_fh *fh,
+		   enum v4l2_subdev_format_whence which)
+{
+	if (which == V4L2_SUBDEV_FORMAT_TRY)
+		return v4l2_subdev_get_try_crop(fh, PREV_PAD_SINK);
+	else
+		return &prev->crop;
+}
+
+/* previewer format descriptions */
+static const unsigned int preview_input_fmts[] = {
+	V4L2_MBUS_FMT_SGRBG10_1X10,
+	V4L2_MBUS_FMT_SRGGB10_1X10,
+	V4L2_MBUS_FMT_SBGGR10_1X10,
+	V4L2_MBUS_FMT_SGBRG10_1X10,
+};
+
+static const unsigned int preview_output_fmts[] = {
+	V4L2_MBUS_FMT_UYVY8_1X16,
+	V4L2_MBUS_FMT_YUYV8_1X16,
+};
+
+/*
+ * preview_try_format - Validate a format
+ * @prev: ISP preview engine
+ * @fh: V4L2 subdev file handle
+ * @pad: pad number
+ * @fmt: format to be validated
+ * @which: try/active format selector
+ *
+ * Validate and adjust the given format for the given pad based on the preview
+ * engine limits and the format and crop rectangles on other pads.
+ */
+static void preview_try_format(struct isp_prev_device *prev,
+			       struct v4l2_subdev_fh *fh, unsigned int pad,
+			       struct v4l2_mbus_framefmt *fmt,
+			       enum v4l2_subdev_format_whence which)
+{
+	enum v4l2_mbus_pixelcode pixelcode;
+	struct v4l2_rect *crop;
+	unsigned int i;
+
+	switch (pad) {
+	case PREV_PAD_SINK:
+		/* When reading data from the CCDC, the input size has already
+		 * been mangled by the CCDC output pad so it can be accepted
+		 * as-is.
+		 *
+		 * When reading data from memory, clamp the requested width and
+		 * height. The TRM doesn't specify a minimum input height, make
+		 * sure we got enough lines to enable the noise filter and color
+		 * filter array interpolation.
+		 */
+		if (prev->input == PREVIEW_INPUT_MEMORY) {
+			fmt->width = clamp_t(u32, fmt->width, PREV_MIN_IN_WIDTH,
+					     preview_max_out_width(prev));
+			fmt->height = clamp_t(u32, fmt->height,
+					      PREV_MIN_IN_HEIGHT,
+					      PREV_MAX_IN_HEIGHT);
+		}
+
+		fmt->colorspace = V4L2_COLORSPACE_SRGB;
+
+		for (i = 0; i < ARRAY_SIZE(preview_input_fmts); i++) {
+			if (fmt->code == preview_input_fmts[i])
+				break;
+		}
+
+		/* If not found, use SGRBG10 as default */
+		if (i >= ARRAY_SIZE(preview_input_fmts))
+			fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10;
+		break;
+
+	case PREV_PAD_SOURCE:
+		pixelcode = fmt->code;
+		*fmt = *__preview_get_format(prev, fh, PREV_PAD_SINK, which);
+
+		switch (pixelcode) {
+		case V4L2_MBUS_FMT_YUYV8_1X16:
+		case V4L2_MBUS_FMT_UYVY8_1X16:
+			fmt->code = pixelcode;
+			break;
+
+		default:
+			fmt->code = V4L2_MBUS_FMT_YUYV8_1X16;
+			break;
+		}
+
+		/* The preview module output size is configurable through the
+		 * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). This
+		 * is not supported yet, hardcode the output size to the crop
+		 * rectangle size.
+		 */
+		crop = __preview_get_crop(prev, fh, which);
+		fmt->width = crop->width;
+		fmt->height = crop->height;
+
+		fmt->colorspace = V4L2_COLORSPACE_JPEG;
+		break;
+	}
+
+	fmt->field = V4L2_FIELD_NONE;
+}
+
+/*
+ * preview_try_crop - Validate a crop rectangle
+ * @prev: ISP preview engine
+ * @sink: format on the sink pad
+ * @crop: crop rectangle to be validated
+ *
+ * The preview engine crops lines and columns for its internal operation,
+ * depending on which filters are enabled. Enforce minimum crop margins to
+ * handle that transparently for userspace.
+ *
+ * See the explanation at the PREV_MARGIN_* definitions for more details.
+ */
+static void preview_try_crop(struct isp_prev_device *prev,
+			     const struct v4l2_mbus_framefmt *sink,
+			     struct v4l2_rect *crop)
+{
+	unsigned int left = PREV_MARGIN_LEFT;
+	unsigned int right = sink->width - PREV_MARGIN_RIGHT;
+	unsigned int top = PREV_MARGIN_TOP;
+	unsigned int bottom = sink->height - PREV_MARGIN_BOTTOM;
+
+	/* When processing data on-the-fly from the CCDC, at least 2 pixels must
+	 * be cropped from the left and right sides of the image. As we don't
+	 * know which filters will be enabled, increase the left and right
+	 * margins by two.
+	 */
+	if (prev->input == PREVIEW_INPUT_CCDC) {
+		left += 2;
+		right -= 2;
+	}
+
+	/* Restrict left/top to even values to keep the Bayer pattern. */
+	crop->left &= ~1;
+	crop->top &= ~1;
+
+	crop->left = clamp_t(u32, crop->left, left, right - PREV_MIN_OUT_WIDTH);
+	crop->top = clamp_t(u32, crop->top, top, bottom - PREV_MIN_OUT_HEIGHT);
+	crop->width = clamp_t(u32, crop->width, PREV_MIN_OUT_WIDTH,
+			      right - crop->left);
+	crop->height = clamp_t(u32, crop->height, PREV_MIN_OUT_HEIGHT,
+			       bottom - crop->top);
+}
+
+/*
+ * preview_enum_mbus_code - Handle pixel format enumeration
+ * @sd     : pointer to v4l2 subdev structure
+ * @fh     : V4L2 subdev file handle
+ * @code   : pointer to v4l2_subdev_mbus_code_enum structure
+ * return -EINVAL or zero on success
+ */
+static int preview_enum_mbus_code(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_fh *fh,
+				  struct v4l2_subdev_mbus_code_enum *code)
+{
+	switch (code->pad) {
+	case PREV_PAD_SINK:
+		if (code->index >= ARRAY_SIZE(preview_input_fmts))
+			return -EINVAL;
+
+		code->code = preview_input_fmts[code->index];
+		break;
+	case PREV_PAD_SOURCE:
+		if (code->index >= ARRAY_SIZE(preview_output_fmts))
+			return -EINVAL;
+
+		code->code = preview_output_fmts[code->index];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int preview_enum_frame_size(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_fh *fh,
+				   struct v4l2_subdev_frame_size_enum *fse)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt format;
+
+	if (fse->index != 0)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = 1;
+	format.height = 1;
+	preview_try_format(prev, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->min_width = format.width;
+	fse->min_height = format.height;
+
+	if (format.code != fse->code)
+		return -EINVAL;
+
+	format.code = fse->code;
+	format.width = -1;
+	format.height = -1;
+	preview_try_format(prev, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+	fse->max_width = format.width;
+	fse->max_height = format.height;
+
+	return 0;
+}
+
+/*
+ * preview_get_crop - Retrieve the crop rectangle on a pad
+ * @sd: ISP preview V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ * @crop: crop rectangle
+ *
+ * Return 0 on success or a negative error code otherwise.
+ */
+static int preview_get_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			    struct v4l2_subdev_crop *crop)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+
+	/* Cropping is only supported on the sink pad. */
+	if (crop->pad != PREV_PAD_SINK)
+		return -EINVAL;
+
+	crop->rect = *__preview_get_crop(prev, fh, crop->which);
+	return 0;
+}
+
+/*
+ * preview_set_crop - Retrieve the crop rectangle on a pad
+ * @sd: ISP preview V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ * @crop: crop rectangle
+ *
+ * Return 0 on success or a negative error code otherwise.
+ */
+static int preview_set_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			    struct v4l2_subdev_crop *crop)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	/* Cropping is only supported on the sink pad. */
+	if (crop->pad != PREV_PAD_SINK)
+		return -EINVAL;
+
+	/* The crop rectangle can't be changed while streaming. */
+	if (prev->state != ISP_PIPELINE_STREAM_STOPPED)
+		return -EBUSY;
+
+	format = __preview_get_format(prev, fh, PREV_PAD_SINK, crop->which);
+	preview_try_crop(prev, format, &crop->rect);
+	*__preview_get_crop(prev, fh, crop->which) = crop->rect;
+
+	/* Update the source format. */
+	format = __preview_get_format(prev, fh, PREV_PAD_SOURCE, crop->which);
+	preview_try_format(prev, fh, PREV_PAD_SOURCE, format, crop->which);
+
+	return 0;
+}
+
+/*
+ * preview_get_format - Handle get format by pads subdev method
+ * @sd : pointer to v4l2 subdev structure
+ * @fh : V4L2 subdev file handle
+ * @fmt: pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on success
+ */
+static int preview_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_format *fmt)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+
+	format = __preview_get_format(prev, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	fmt->format = *format;
+	return 0;
+}
+
+/*
+ * preview_set_format - Handle set format by pads subdev method
+ * @sd : pointer to v4l2 subdev structure
+ * @fh : V4L2 subdev file handle
+ * @fmt: pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on success
+ */
+static int preview_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_format *fmt)
+{
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+	struct v4l2_mbus_framefmt *format;
+	struct v4l2_rect *crop;
+
+	format = __preview_get_format(prev, fh, fmt->pad, fmt->which);
+	if (format == NULL)
+		return -EINVAL;
+
+	preview_try_format(prev, fh, fmt->pad, &fmt->format, fmt->which);
+	*format = fmt->format;
+
+	/* Propagate the format from sink to source */
+	if (fmt->pad == PREV_PAD_SINK) {
+		/* Reset the crop rectangle. */
+		crop = __preview_get_crop(prev, fh, fmt->which);
+		crop->left = 0;
+		crop->top = 0;
+		crop->width = fmt->format.width;
+		crop->height = fmt->format.height;
+
+		preview_try_crop(prev, &fmt->format, crop);
+
+		/* Update the source format. */
+		format = __preview_get_format(prev, fh, PREV_PAD_SOURCE,
+					      fmt->which);
+		preview_try_format(prev, fh, PREV_PAD_SOURCE, format,
+				   fmt->which);
+	}
+
+	return 0;
+}
+
+/*
+ * preview_init_formats - Initialize formats on all pads
+ * @sd: ISP preview V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values. If fh is not NULL, try
+ * formats are initialized on the file handle. Otherwise active formats are
+ * initialized on the device.
+ */
+static int preview_init_formats(struct v4l2_subdev *sd,
+				struct v4l2_subdev_fh *fh)
+{
+	struct v4l2_subdev_format format;
+
+	memset(&format, 0, sizeof(format));
+	format.pad = PREV_PAD_SINK;
+	format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10;
+	format.format.width = 4096;
+	format.format.height = 4096;
+	preview_set_format(sd, fh, &format);
+
+	return 0;
+}
+
+/* subdev core operations */
+static const struct v4l2_subdev_core_ops preview_v4l2_core_ops = {
+	.ioctl = preview_ioctl,
+};
+
+/* subdev video operations */
+static const struct v4l2_subdev_video_ops preview_v4l2_video_ops = {
+	.s_stream = preview_set_stream,
+};
+
+/* subdev pad operations */
+static const struct v4l2_subdev_pad_ops preview_v4l2_pad_ops = {
+	.enum_mbus_code = preview_enum_mbus_code,
+	.enum_frame_size = preview_enum_frame_size,
+	.get_fmt = preview_get_format,
+	.set_fmt = preview_set_format,
+	.get_crop = preview_get_crop,
+	.set_crop = preview_set_crop,
+};
+
+/* subdev operations */
+static const struct v4l2_subdev_ops preview_v4l2_ops = {
+	.core = &preview_v4l2_core_ops,
+	.video = &preview_v4l2_video_ops,
+	.pad = &preview_v4l2_pad_ops,
+};
+
+/* subdev internal operations */
+static const struct v4l2_subdev_internal_ops preview_v4l2_internal_ops = {
+	.open = preview_init_formats,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media entity operations
+ */
+
+/*
+ * preview_link_setup - Setup previewer connections.
+ * @entity : Pointer to media entity structure
+ * @local  : Pointer to local pad array
+ * @remote : Pointer to remote pad array
+ * @flags  : Link flags
+ * return -EINVAL or zero on success
+ */
+static int preview_link_setup(struct media_entity *entity,
+			      const struct media_pad *local,
+			      const struct media_pad *remote, u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+
+	switch (local->index | media_entity_type(remote->entity)) {
+	case PREV_PAD_SINK | MEDIA_ENT_T_DEVNODE:
+		/* read from memory */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (prev->input == PREVIEW_INPUT_CCDC)
+				return -EBUSY;
+			prev->input = PREVIEW_INPUT_MEMORY;
+		} else {
+			if (prev->input == PREVIEW_INPUT_MEMORY)
+				prev->input = PREVIEW_INPUT_NONE;
+		}
+		break;
+
+	case PREV_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV:
+		/* read from ccdc */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (prev->input == PREVIEW_INPUT_MEMORY)
+				return -EBUSY;
+			prev->input = PREVIEW_INPUT_CCDC;
+		} else {
+			if (prev->input == PREVIEW_INPUT_CCDC)
+				prev->input = PREVIEW_INPUT_NONE;
+		}
+		break;
+
+	/*
+	 * The ISP core doesn't support pipelines with multiple video outputs.
+	 * Revisit this when it will be implemented, and return -EBUSY for now.
+	 */
+
+	case PREV_PAD_SOURCE | MEDIA_ENT_T_DEVNODE:
+		/* write to memory */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (prev->output & ~PREVIEW_OUTPUT_MEMORY)
+				return -EBUSY;
+			prev->output |= PREVIEW_OUTPUT_MEMORY;
+		} else {
+			prev->output &= ~PREVIEW_OUTPUT_MEMORY;
+		}
+		break;
+
+	case PREV_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV:
+		/* write to resizer */
+		if (flags & MEDIA_LNK_FL_ENABLED) {
+			if (prev->output & ~PREVIEW_OUTPUT_RESIZER)
+				return -EBUSY;
+			prev->output |= PREVIEW_OUTPUT_RESIZER;
+		} else {
+			prev->output &= ~PREVIEW_OUTPUT_RESIZER;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* media operations */
+static const struct media_entity_operations preview_media_ops = {
+	.link_setup = preview_link_setup,
+};
+
+void omap3isp_preview_unregister_entities(struct isp_prev_device *prev)
+{
+	v4l2_device_unregister_subdev(&prev->subdev);
+	omap3isp_video_unregister(&prev->video_in);
+	omap3isp_video_unregister(&prev->video_out);
+}
+
+int omap3isp_preview_register_entities(struct isp_prev_device *prev,
+	struct v4l2_device *vdev)
+{
+	int ret;
+
+	/* Register the subdev and video nodes. */
+	ret = v4l2_device_register_subdev(vdev, &prev->subdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&prev->video_in, vdev);
+	if (ret < 0)
+		goto error;
+
+	ret = omap3isp_video_register(&prev->video_out, vdev);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	omap3isp_preview_unregister_entities(prev);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP previewer initialisation and cleanup
+ */
+
+/*
+ * preview_init_entities - Initialize subdev and media entity.
+ * @prev : Pointer to preview structure
+ * return -ENOMEM or zero on success
+ */
+static int preview_init_entities(struct isp_prev_device *prev)
+{
+	struct v4l2_subdev *sd = &prev->subdev;
+	struct media_pad *pads = prev->pads;
+	struct media_entity *me = &sd->entity;
+	int ret;
+
+	prev->input = PREVIEW_INPUT_NONE;
+
+	v4l2_subdev_init(sd, &preview_v4l2_ops);
+	sd->internal_ops = &preview_v4l2_internal_ops;
+	strlcpy(sd->name, "OMAP3 ISP preview", sizeof(sd->name));
+	sd->grp_id = 1 << 16;	/* group ID for isp subdevs */
+	v4l2_set_subdevdata(sd, prev);
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	v4l2_ctrl_handler_init(&prev->ctrls, 2);
+	v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_BRIGHTNESS,
+			  ISPPRV_BRIGHT_LOW, ISPPRV_BRIGHT_HIGH,
+			  ISPPRV_BRIGHT_STEP, ISPPRV_BRIGHT_DEF);
+	v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_CONTRAST,
+			  ISPPRV_CONTRAST_LOW, ISPPRV_CONTRAST_HIGH,
+			  ISPPRV_CONTRAST_STEP, ISPPRV_CONTRAST_DEF);
+	v4l2_ctrl_handler_setup(&prev->ctrls);
+	sd->ctrl_handler = &prev->ctrls;
+
+	pads[PREV_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+	pads[PREV_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+
+	me->ops = &preview_media_ops;
+	ret = media_entity_init(me, PREV_PADS_NUM, pads, 0);
+	if (ret < 0)
+		return ret;
+
+	preview_init_formats(sd, NULL);
+
+	/* According to the OMAP34xx TRM, video buffers need to be aligned on a
+	 * 32 bytes boundary. However, an undocumented hardware bug requires a
+	 * 64 bytes boundary at the preview engine input.
+	 */
+	prev->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	prev->video_in.ops = &preview_video_ops;
+	prev->video_in.isp = to_isp_device(prev);
+	prev->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3;
+	prev->video_in.bpl_alignment = 64;
+	prev->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	prev->video_out.ops = &preview_video_ops;
+	prev->video_out.isp = to_isp_device(prev);
+	prev->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3;
+	prev->video_out.bpl_alignment = 32;
+
+	ret = omap3isp_video_init(&prev->video_in, "preview");
+	if (ret < 0)
+		goto error_video_in;
+
+	ret = omap3isp_video_init(&prev->video_out, "preview");
+	if (ret < 0)
+		goto error_video_out;
+
+	/* Connect the video nodes to the previewer subdev. */
+	ret = media_entity_create_link(&prev->video_in.video.entity, 0,
+			&prev->subdev.entity, PREV_PAD_SINK, 0);
+	if (ret < 0)
+		goto error_link;
+
+	ret = media_entity_create_link(&prev->subdev.entity, PREV_PAD_SOURCE,
+			&prev->video_out.video.entity, 0, 0);
+	if (ret < 0)
+		goto error_link;
+
+	return 0;
+
+error_link:
+	omap3isp_video_cleanup(&prev->video_out);
+error_video_out:
+	omap3isp_video_cleanup(&prev->video_in);
+error_video_in:
+	media_entity_cleanup(&prev->subdev.entity);
+	return ret;
+}
+
+/*
+ * isp_preview_init - Previewer initialization.
+ * @dev : Pointer to ISP device
+ * return -ENOMEM or zero on success
+ */
+int omap3isp_preview_init(struct isp_device *isp)
+{
+	struct isp_prev_device *prev = &isp->isp_prev;
+
+	spin_lock_init(&prev->lock);
+	init_waitqueue_head(&prev->wait);
+	preview_init_params(prev);
+
+	return preview_init_entities(prev);
+}
+
+void omap3isp_preview_cleanup(struct isp_device *isp)
+{
+	struct isp_prev_device *prev = &isp->isp_prev;
+
+	v4l2_ctrl_handler_free(&prev->ctrls);
+	omap3isp_video_cleanup(&prev->video_in);
+	omap3isp_video_cleanup(&prev->video_out);
+	media_entity_cleanup(&prev->subdev.entity);
+}