dirty fix to merging

1 files changed, 1508 insertions, 0 deletions

diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c
new file mode 100644
index 00000000..b4887918
--- /dev/null
+++ b/drivers/media/dvb/frontends/cx24116.c
@@ -0,0 +1,1508 @@
+/*
+    Conexant cx24116/cx24118 - DVBS/S2 Satellite demod/tuner driver
+
+    Copyright (C) 2006-2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2006-2007 Georg Acher
+    Copyright (C) 2007-2008 Darron Broad
+	March 2007
+	    Fixed some bugs.
+	    Added diseqc support.
+	    Added corrected signal strength support.
+	August 2007
+	    Sync with legacy version.
+	    Some clean ups.
+    Copyright (C) 2008 Igor Liplianin
+	September, 9th 2008
+	    Fixed locking on high symbol rates (>30000).
+	    Implement MPEG initialization parameter.
+	January, 17th 2009
+	    Fill set_voltage with actually control voltage code.
+	    Correct set tone to not affect voltage.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/firmware.h>
+
+#include "dvb_frontend.h"
+#include "cx24116.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+#define dprintk(args...) \
+	do { \
+		if (debug) \
+			printk(KERN_INFO "cx24116: " args); \
+	} while (0)
+
+#define CX24116_DEFAULT_FIRMWARE "dvb-fe-cx24116.fw"
+#define CX24116_SEARCH_RANGE_KHZ 5000
+
+/* known registers */
+#define CX24116_REG_COMMAND (0x00)      /* command args 0x00..0x1e */
+#define CX24116_REG_EXECUTE (0x1f)      /* execute command */
+#define CX24116_REG_MAILBOX (0x96)      /* FW or multipurpose mailbox? */
+#define CX24116_REG_RESET   (0x20)      /* reset status > 0     */
+#define CX24116_REG_SIGNAL  (0x9e)      /* signal low           */
+#define CX24116_REG_SSTATUS (0x9d)      /* signal high / status */
+#define CX24116_REG_QUALITY8 (0xa3)
+#define CX24116_REG_QSTATUS (0xbc)
+#define CX24116_REG_QUALITY0 (0xd5)
+#define CX24116_REG_BER0    (0xc9)
+#define CX24116_REG_BER8    (0xc8)
+#define CX24116_REG_BER16   (0xc7)
+#define CX24116_REG_BER24   (0xc6)
+#define CX24116_REG_UCB0    (0xcb)
+#define CX24116_REG_UCB8    (0xca)
+#define CX24116_REG_CLKDIV  (0xf3)
+#define CX24116_REG_RATEDIV (0xf9)
+
+/* configured fec (not tuned) or actual FEC (tuned) 1=1/2 2=2/3 etc */
+#define CX24116_REG_FECSTATUS (0x9c)
+
+/* FECSTATUS bits */
+/* mask to determine configured fec (not tuned) or actual fec (tuned) */
+#define CX24116_FEC_FECMASK   (0x1f)
+
+/* Select DVB-S demodulator, else DVB-S2 */
+#define CX24116_FEC_DVBS      (0x20)
+#define CX24116_FEC_UNKNOWN   (0x40)    /* Unknown/unused */
+
+/* Pilot mode requested when tuning else always reset when tuned */
+#define CX24116_FEC_PILOT     (0x80)
+
+/* arg buffer size */
+#define CX24116_ARGLEN (0x1e)
+
+/* rolloff */
+#define CX24116_ROLLOFF_020 (0x00)
+#define CX24116_ROLLOFF_025 (0x01)
+#define CX24116_ROLLOFF_035 (0x02)
+
+/* pilot bit */
+#define CX24116_PILOT_OFF (0x00)
+#define CX24116_PILOT_ON (0x40)
+
+/* signal status */
+#define CX24116_HAS_SIGNAL   (0x01)
+#define CX24116_HAS_CARRIER  (0x02)
+#define CX24116_HAS_VITERBI  (0x04)
+#define CX24116_HAS_SYNCLOCK (0x08)
+#define CX24116_HAS_UNKNOWN1 (0x10)
+#define CX24116_HAS_UNKNOWN2 (0x20)
+#define CX24116_STATUS_MASK  (0x0f)
+#define CX24116_SIGNAL_MASK  (0xc0)
+
+#define CX24116_DISEQC_TONEOFF   (0)    /* toneburst never sent */
+#define CX24116_DISEQC_TONECACHE (1)    /* toneburst cached     */
+#define CX24116_DISEQC_MESGCACHE (2)    /* message cached       */
+
+/* arg offset for DiSEqC */
+#define CX24116_DISEQC_BURST  (1)
+#define CX24116_DISEQC_ARG2_2 (2)   /* unknown value=2 */
+#define CX24116_DISEQC_ARG3_0 (3)   /* unknown value=0 */
+#define CX24116_DISEQC_ARG4_0 (4)   /* unknown value=0 */
+#define CX24116_DISEQC_MSGLEN (5)
+#define CX24116_DISEQC_MSGOFS (6)
+
+/* DiSEqC burst */
+#define CX24116_DISEQC_MINI_A (0)
+#define CX24116_DISEQC_MINI_B (1)
+
+/* DiSEqC tone burst */
+static int toneburst = 1;
+module_param(toneburst, int, 0644);
+MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, "\
+	"2=MESSAGE CACHE (default:1)");
+
+/* SNR measurements */
+static int esno_snr;
+module_param(esno_snr, int, 0644);
+MODULE_PARM_DESC(esno_snr, "SNR return units, 0=PERCENTAGE 0-100, "\
+	"1=ESNO(db * 10) (default:0)");
+
+enum cmds {
+	CMD_SET_VCO     = 0x10,
+	CMD_TUNEREQUEST = 0x11,
+	CMD_MPEGCONFIG  = 0x13,
+	CMD_TUNERINIT   = 0x14,
+	CMD_BANDWIDTH   = 0x15,
+	CMD_GETAGC      = 0x19,
+	CMD_LNBCONFIG   = 0x20,
+	CMD_LNBSEND     = 0x21, /* Formerly CMD_SEND_DISEQC */
+	CMD_LNBDCLEVEL  = 0x22,
+	CMD_SET_TONE    = 0x23,
+	CMD_UPDFWVERS   = 0x35,
+	CMD_TUNERSLEEP  = 0x36,
+	CMD_AGCCONTROL  = 0x3b, /* Unknown */
+};
+
+/* The Demod/Tuner can't easily provide these, we cache them */
+struct cx24116_tuning {
+	u32 frequency;
+	u32 symbol_rate;
+	fe_spectral_inversion_t inversion;
+	fe_code_rate_t fec;
+
+	fe_delivery_system_t delsys;
+	fe_modulation_t modulation;
+	fe_pilot_t pilot;
+	fe_rolloff_t rolloff;
+
+	/* Demod values */
+	u8 fec_val;
+	u8 fec_mask;
+	u8 inversion_val;
+	u8 pilot_val;
+	u8 rolloff_val;
+};
+
+/* Basic commands that are sent to the firmware */
+struct cx24116_cmd {
+	u8 len;
+	u8 args[CX24116_ARGLEN];
+};
+
+struct cx24116_state {
+	struct i2c_adapter *i2c;
+	const struct cx24116_config *config;
+
+	struct dvb_frontend frontend;
+
+	struct cx24116_tuning dcur;
+	struct cx24116_tuning dnxt;
+
+	u8 skip_fw_load;
+	u8 burst;
+	struct cx24116_cmd dsec_cmd;
+};
+
+static int cx24116_writereg(struct cx24116_state *state, int reg, int data)
+{
+	u8 buf[] = { reg, data };
+	struct i2c_msg msg = { .addr = state->config->demod_address,
+		.flags = 0, .buf = buf, .len = 2 };
+	int err;
+
+	if (debug > 1)
+		printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n",
+			__func__, reg, data);
+
+	err = i2c_transfer(state->i2c, &msg, 1);
+	if (err != 1) {
+		printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x,"
+			 " value == 0x%02x)\n", __func__, err, reg, data);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+/* Bulk byte writes to a single I2C address, for 32k firmware load */
+static int cx24116_writeregN(struct cx24116_state *state, int reg,
+			     const u8 *data, u16 len)
+{
+	int ret = -EREMOTEIO;
+	struct i2c_msg msg;
+	u8 *buf;
+
+	buf = kmalloc(len + 1, GFP_KERNEL);
+	if (buf == NULL) {
+		printk("Unable to kmalloc\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	*(buf) = reg;
+	memcpy(buf + 1, data, len);
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.buf = buf;
+	msg.len = len + 1;
+
+	if (debug > 1)
+		printk(KERN_INFO "cx24116: %s:  write regN 0x%02x, len = %d\n",
+			__func__, reg, len);
+
+	ret = i2c_transfer(state->i2c, &msg, 1);
+	if (ret != 1) {
+		printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x\n",
+			 __func__, ret, reg);
+		ret = -EREMOTEIO;
+	}
+
+error:
+	kfree(buf);
+
+	return ret;
+}
+
+static int cx24116_readreg(struct cx24116_state *state, u8 reg)
+{
+	int ret;
+	u8 b0[] = { reg };
+	u8 b1[] = { 0 };
+	struct i2c_msg msg[] = {
+		{ .addr = state->config->demod_address, .flags = 0,
+			.buf = b0, .len = 1 },
+		{ .addr = state->config->demod_address, .flags = I2C_M_RD,
+			.buf = b1, .len = 1 }
+	};
+
+	ret = i2c_transfer(state->i2c, msg, 2);
+
+	if (ret != 2) {
+		printk(KERN_ERR "%s: reg=0x%x (error=%d)\n",
+			__func__, reg, ret);
+		return ret;
+	}
+
+	if (debug > 1)
+		printk(KERN_INFO "cx24116: read reg 0x%02x, value 0x%02x\n",
+			reg, b1[0]);
+
+	return b1[0];
+}
+
+static int cx24116_set_inversion(struct cx24116_state *state,
+	fe_spectral_inversion_t inversion)
+{
+	dprintk("%s(%d)\n", __func__, inversion);
+
+	switch (inversion) {
+	case INVERSION_OFF:
+		state->dnxt.inversion_val = 0x00;
+		break;
+	case INVERSION_ON:
+		state->dnxt.inversion_val = 0x04;
+		break;
+	case INVERSION_AUTO:
+		state->dnxt.inversion_val = 0x0C;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	state->dnxt.inversion = inversion;
+
+	return 0;
+}
+
+/*
+ * modfec (modulation and FEC)
+ * ===========================
+ *
+ * MOD          FEC             mask/val    standard
+ * ----         --------        ----------- --------
+ * QPSK         FEC_1_2         0x02 0x02+X DVB-S
+ * QPSK         FEC_2_3         0x04 0x02+X DVB-S
+ * QPSK         FEC_3_4         0x08 0x02+X DVB-S
+ * QPSK         FEC_4_5         0x10 0x02+X DVB-S (?)
+ * QPSK         FEC_5_6         0x20 0x02+X DVB-S
+ * QPSK         FEC_6_7         0x40 0x02+X DVB-S
+ * QPSK         FEC_7_8         0x80 0x02+X DVB-S
+ * QPSK         FEC_8_9         0x01 0x02+X DVB-S (?) (NOT SUPPORTED?)
+ * QPSK         AUTO            0xff 0x02+X DVB-S
+ *
+ * For DVB-S high byte probably represents FEC
+ * and low byte selects the modulator. The high
+ * byte is search range mask. Bit 5 may turn
+ * on DVB-S and remaining bits represent some
+ * kind of calibration (how/what i do not know).
+ *
+ * Eg.(2/3) szap "Zone Horror"
+ *
+ * mask/val = 0x04, 0x20
+ * status 1f | signal c3c0 | snr a333 | ber 00000098 | unc 0 | FE_HAS_LOCK
+ *
+ * mask/val = 0x04, 0x30
+ * status 1f | signal c3c0 | snr a333 | ber 00000000 | unc 0 | FE_HAS_LOCK
+ *
+ * After tuning FECSTATUS contains actual FEC
+ * in use numbered 1 through to 8 for 1/2 .. 2/3 etc
+ *
+ * NBC=NOT/NON BACKWARD COMPATIBLE WITH DVB-S (DVB-S2 only)
+ *
+ * NBC-QPSK     FEC_1_2         0x00, 0x04      DVB-S2
+ * NBC-QPSK     FEC_3_5         0x00, 0x05      DVB-S2
+ * NBC-QPSK     FEC_2_3         0x00, 0x06      DVB-S2
+ * NBC-QPSK     FEC_3_4         0x00, 0x07      DVB-S2
+ * NBC-QPSK     FEC_4_5         0x00, 0x08      DVB-S2
+ * NBC-QPSK     FEC_5_6         0x00, 0x09      DVB-S2
+ * NBC-QPSK     FEC_8_9         0x00, 0x0a      DVB-S2
+ * NBC-QPSK     FEC_9_10        0x00, 0x0b      DVB-S2
+ *
+ * NBC-8PSK     FEC_3_5         0x00, 0x0c      DVB-S2
+ * NBC-8PSK     FEC_2_3         0x00, 0x0d      DVB-S2
+ * NBC-8PSK     FEC_3_4         0x00, 0x0e      DVB-S2
+ * NBC-8PSK     FEC_5_6         0x00, 0x0f      DVB-S2
+ * NBC-8PSK     FEC_8_9         0x00, 0x10      DVB-S2
+ * NBC-8PSK     FEC_9_10        0x00, 0x11      DVB-S2
+ *
+ * For DVB-S2 low bytes selects both modulator
+ * and FEC. High byte is meaningless here. To
+ * set pilot, bit 6 (0x40) is set. When inspecting
+ * FECSTATUS bit 7 (0x80) represents the pilot
+ * selection whilst not tuned. When tuned, actual FEC
+ * in use is found in FECSTATUS as per above. Pilot
+ * value is reset.
+ */
+
+/* A table of modulation, fec and configuration bytes for the demod.
+ * Not all S2 mmodulation schemes are support and not all rates with
+ * a scheme are support. Especially, no auto detect when in S2 mode.
+ */
+static struct cx24116_modfec {
+	fe_delivery_system_t delivery_system;
+	fe_modulation_t modulation;
+	fe_code_rate_t fec;
+	u8 mask;	/* In DVBS mode this is used to autodetect */
+	u8 val;		/* Passed to the firmware to indicate mode selection */
+} CX24116_MODFEC_MODES[] = {
+ /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */
+
+ /*mod   fec       mask  val */
+ { SYS_DVBS, QPSK, FEC_NONE, 0xfe, 0x30 },
+ { SYS_DVBS, QPSK, FEC_1_2,  0x02, 0x2e }, /* 00000010 00101110 */
+ { SYS_DVBS, QPSK, FEC_2_3,  0x04, 0x2f }, /* 00000100 00101111 */
+ { SYS_DVBS, QPSK, FEC_3_4,  0x08, 0x30 }, /* 00001000 00110000 */
+ { SYS_DVBS, QPSK, FEC_4_5,  0xfe, 0x30 }, /* 000?0000 ?        */
+ { SYS_DVBS, QPSK, FEC_5_6,  0x20, 0x31 }, /* 00100000 00110001 */
+ { SYS_DVBS, QPSK, FEC_6_7,  0xfe, 0x30 }, /* 0?000000 ?        */
+ { SYS_DVBS, QPSK, FEC_7_8,  0x80, 0x32 }, /* 10000000 00110010 */
+ { SYS_DVBS, QPSK, FEC_8_9,  0xfe, 0x30 }, /* 0000000? ?        */
+ { SYS_DVBS, QPSK, FEC_AUTO, 0xfe, 0x30 },
+ /* NBC-QPSK */
+ { SYS_DVBS2, QPSK, FEC_1_2,  0x00, 0x04 },
+ { SYS_DVBS2, QPSK, FEC_3_5,  0x00, 0x05 },
+ { SYS_DVBS2, QPSK, FEC_2_3,  0x00, 0x06 },
+ { SYS_DVBS2, QPSK, FEC_3_4,  0x00, 0x07 },
+ { SYS_DVBS2, QPSK, FEC_4_5,  0x00, 0x08 },
+ { SYS_DVBS2, QPSK, FEC_5_6,  0x00, 0x09 },
+ { SYS_DVBS2, QPSK, FEC_8_9,  0x00, 0x0a },
+ { SYS_DVBS2, QPSK, FEC_9_10, 0x00, 0x0b },
+ /* 8PSK */
+ { SYS_DVBS2, PSK_8, FEC_3_5,  0x00, 0x0c },
+ { SYS_DVBS2, PSK_8, FEC_2_3,  0x00, 0x0d },
+ { SYS_DVBS2, PSK_8, FEC_3_4,  0x00, 0x0e },
+ { SYS_DVBS2, PSK_8, FEC_5_6,  0x00, 0x0f },
+ { SYS_DVBS2, PSK_8, FEC_8_9,  0x00, 0x10 },
+ { SYS_DVBS2, PSK_8, FEC_9_10, 0x00, 0x11 },
+ /*
+  * `val' can be found in the FECSTATUS register when tuning.
+  * FECSTATUS will give the actual FEC in use if tuning was successful.
+  */
+};
+
+static int cx24116_lookup_fecmod(struct cx24116_state *state,
+	fe_delivery_system_t d, fe_modulation_t m, fe_code_rate_t f)
+{
+	int i, ret = -EOPNOTSUPP;
+
+	dprintk("%s(0x%02x,0x%02x)\n", __func__, m, f);
+
+	for (i = 0; i < ARRAY_SIZE(CX24116_MODFEC_MODES); i++) {
+		if ((d == CX24116_MODFEC_MODES[i].delivery_system) &&
+			(m == CX24116_MODFEC_MODES[i].modulation) &&
+			(f == CX24116_MODFEC_MODES[i].fec)) {
+				ret = i;
+				break;
+			}
+	}
+
+	return ret;
+}
+
+static int cx24116_set_fec(struct cx24116_state *state,
+	fe_delivery_system_t delsys, fe_modulation_t mod, fe_code_rate_t fec)
+{
+	int ret = 0;
+
+	dprintk("%s(0x%02x,0x%02x)\n", __func__, mod, fec);
+
+	ret = cx24116_lookup_fecmod(state, delsys, mod, fec);
+
+	if (ret < 0)
+		return ret;
+
+	state->dnxt.fec = fec;
+	state->dnxt.fec_val = CX24116_MODFEC_MODES[ret].val;
+	state->dnxt.fec_mask = CX24116_MODFEC_MODES[ret].mask;
+	dprintk("%s() mask/val = 0x%02x/0x%02x\n", __func__,
+		state->dnxt.fec_mask, state->dnxt.fec_val);
+
+	return 0;
+}
+
+static int cx24116_set_symbolrate(struct cx24116_state *state, u32 rate)
+{
+	dprintk("%s(%d)\n", __func__, rate);
+
+	/*  check if symbol rate is within limits */
+	if ((rate > state->frontend.ops.info.symbol_rate_max) ||
+	    (rate < state->frontend.ops.info.symbol_rate_min)) {
+		dprintk("%s() unsupported symbol_rate = %d\n", __func__, rate);
+		return -EOPNOTSUPP;
+	}
+
+	state->dnxt.symbol_rate = rate;
+	dprintk("%s() symbol_rate = %d\n", __func__, rate);
+
+	return 0;
+}
+
+static int cx24116_load_firmware(struct dvb_frontend *fe,
+	const struct firmware *fw);
+
+static int cx24116_firmware_ondemand(struct dvb_frontend *fe)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	const struct firmware *fw;
+	int ret = 0;
+
+	dprintk("%s()\n", __func__);
+
+	if (cx24116_readreg(state, 0x20) > 0) {
+
+		if (state->skip_fw_load)
+			return 0;
+
+		/* Load firmware */
+		/* request the firmware, this will block until loaded */
+		printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n",
+			__func__, CX24116_DEFAULT_FIRMWARE);
+		ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE,
+			state->i2c->dev.parent);
+		printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n",
+			__func__);
+		if (ret) {
+			printk(KERN_ERR "%s: No firmware uploaded "
+				"(timeout or file not found?)\n", __func__);
+			return ret;
+		}
+
+		/* Make sure we don't recurse back through here
+		 * during loading */
+		state->skip_fw_load = 1;
+
+		ret = cx24116_load_firmware(fe, fw);
+		if (ret)
+			printk(KERN_ERR "%s: Writing firmware to device failed\n",
+				__func__);
+
+		release_firmware(fw);
+
+		printk(KERN_INFO "%s: Firmware upload %s\n", __func__,
+			ret == 0 ? "complete" : "failed");
+
+		/* Ensure firmware is always loaded if required */
+		state->skip_fw_load = 0;
+	}
+
+	return ret;
+}
+
+/* Take a basic firmware command structure, format it
+ * and forward it for processing
+ */
+static int cx24116_cmd_execute(struct dvb_frontend *fe, struct cx24116_cmd *cmd)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	int i, ret;
+
+	dprintk("%s()\n", __func__);
+
+	/* Load the firmware if required */
+	ret = cx24116_firmware_ondemand(fe);
+	if (ret != 0) {
+		printk(KERN_ERR "%s(): Unable initialise the firmware\n",
+			__func__);
+		return ret;
+	}
+
+	/* Write the command */
+	for (i = 0; i < cmd->len ; i++) {
+		dprintk("%s: 0x%02x == 0x%02x\n", __func__, i, cmd->args[i]);
+		cx24116_writereg(state, i, cmd->args[i]);
+	}
+
+	/* Start execution and wait for cmd to terminate */
+	cx24116_writereg(state, CX24116_REG_EXECUTE, 0x01);
+	while (cx24116_readreg(state, CX24116_REG_EXECUTE)) {
+		msleep(10);
+		if (i++ > 64) {
+			/* Avoid looping forever if the firmware does
+				not respond */
+			printk(KERN_WARNING "%s() Firmware not responding\n",
+				__func__);
+			return -EREMOTEIO;
+		}
+	}
+	return 0;
+}
+
+static int cx24116_load_firmware(struct dvb_frontend *fe,
+	const struct firmware *fw)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	struct cx24116_cmd cmd;
+	int i, ret, len, max, remaining;
+	unsigned char vers[4];
+
+	dprintk("%s\n", __func__);
+	dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n",
+			fw->size,
+			fw->data[0],
+			fw->data[1],
+			fw->data[fw->size-2],
+			fw->data[fw->size-1]);
+
+	/* Toggle 88x SRST pin to reset demod */
+	if (state->config->reset_device)
+		state->config->reset_device(fe);
+
+	/* Begin the firmware load process */
+	/* Prepare the demod, load the firmware, cleanup after load */
+
+	/* Init PLL */
+	cx24116_writereg(state, 0xE5, 0x00);
+	cx24116_writereg(state, 0xF1, 0x08);
+	cx24116_writereg(state, 0xF2, 0x13);
+
+	/* Start PLL */
+	cx24116_writereg(state, 0xe0, 0x03);
+	cx24116_writereg(state, 0xe0, 0x00);
+
+	/* Unknown */
+	cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46);
+	cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00);
+
+	/* Unknown */
+	cx24116_writereg(state, 0xF0, 0x03);
+	cx24116_writereg(state, 0xF4, 0x81);
+	cx24116_writereg(state, 0xF5, 0x00);
+	cx24116_writereg(state, 0xF6, 0x00);
+
+	/* Split firmware to the max I2C write len and write.
+	 * Writes whole firmware as one write when i2c_wr_max is set to 0. */
+	if (state->config->i2c_wr_max)
+		max = state->config->i2c_wr_max;
+	else
+		max = INT_MAX; /* enough for 32k firmware */
+
+	for (remaining = fw->size; remaining > 0; remaining -= max - 1) {
+		len = remaining;
+		if (len > max - 1)
+			len = max - 1;
+
+		cx24116_writeregN(state, 0xF7, &fw->data[fw->size - remaining],
+			len);
+	}
+
+	cx24116_writereg(state, 0xF4, 0x10);
+	cx24116_writereg(state, 0xF0, 0x00);
+	cx24116_writereg(state, 0xF8, 0x06);
+
+	/* Firmware CMD 10: VCO config */
+	cmd.args[0x00] = CMD_SET_VCO;
+	cmd.args[0x01] = 0x05;
+	cmd.args[0x02] = 0xdc;
+	cmd.args[0x03] = 0xda;
+	cmd.args[0x04] = 0xae;
+	cmd.args[0x05] = 0xaa;
+	cmd.args[0x06] = 0x04;
+	cmd.args[0x07] = 0x9d;
+	cmd.args[0x08] = 0xfc;
+	cmd.args[0x09] = 0x06;
+	cmd.len = 0x0a;
+	ret = cx24116_cmd_execute(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	cx24116_writereg(state, CX24116_REG_SSTATUS, 0x00);
+
+	/* Firmware CMD 14: Tuner config */
+	cmd.args[0x00] = CMD_TUNERINIT;
+	cmd.args[0x01] = 0x00;
+	cmd.args[0x02] = 0x00;
+	cmd.len = 0x03;
+	ret = cx24116_cmd_execute(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	cx24116_writereg(state, 0xe5, 0x00);
+
+	/* Firmware CMD 13: MPEG config */
+	cmd.args[0x00] = CMD_MPEGCONFIG;
+	cmd.args[0x01] = 0x01;
+	cmd.args[0x02] = 0x75;
+	cmd.args[0x03] = 0x00;
+	if (state->config->mpg_clk_pos_pol)
+		cmd.args[0x04] = state->config->mpg_clk_pos_pol;
+	else
+		cmd.args[0x04] = 0x02;
+	cmd.args[0x05] = 0x00;
+	cmd.len = 0x06;
+	ret = cx24116_cmd_execute(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	/* Firmware CMD 35: Get firmware version */
+	cmd.args[0x00] = CMD_UPDFWVERS;
+	cmd.len = 0x02;
+	for (i = 0; i < 4; i++) {
+		cmd.args[0x01] = i;
+		ret = cx24116_cmd_execute(fe, &cmd);
+		if (ret != 0)
+			return ret;
+		vers[i] = cx24116_readreg(state, CX24116_REG_MAILBOX);
+	}
+	printk(KERN_INFO "%s: FW version %i.%i.%i.%i\n", __func__,
+		vers[0], vers[1], vers[2], vers[3]);
+
+	return 0;
+}
+
+static int cx24116_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+
+	int lock = cx24116_readreg(state, CX24116_REG_SSTATUS) &
+		CX24116_STATUS_MASK;
+
+	dprintk("%s: status = 0x%02x\n", __func__, lock);
+
+	*status = 0;
+
+	if (lock & CX24116_HAS_SIGNAL)
+		*status |= FE_HAS_SIGNAL;
+	if (lock & CX24116_HAS_CARRIER)
+		*status |= FE_HAS_CARRIER;
+	if (lock & CX24116_HAS_VITERBI)
+		*status |= FE_HAS_VITERBI;
+	if (lock & CX24116_HAS_SYNCLOCK)
+		*status |= FE_HAS_SYNC | FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int cx24116_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+
+	dprintk("%s()\n", __func__);
+
+	*ber =  (cx24116_readreg(state, CX24116_REG_BER24) << 24) |
+		(cx24116_readreg(state, CX24116_REG_BER16) << 16) |
+		(cx24116_readreg(state, CX24116_REG_BER8)  << 8)  |
+		 cx24116_readreg(state, CX24116_REG_BER0);
+
+	return 0;
+}
+
+/* TODO Determine function and scale appropriately */
+static int cx24116_read_signal_strength(struct dvb_frontend *fe,
+	u16 *signal_strength)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	struct cx24116_cmd cmd;
+	int ret;
+	u16 sig_reading;
+
+	dprintk("%s()\n", __func__);
+
+	/* Firmware CMD 19: Get AGC */
+	cmd.args[0x00] = CMD_GETAGC;
+	cmd.len = 0x01;
+	ret = cx24116_cmd_execute(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	sig_reading =
+		(cx24116_readreg(state,
+			CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK) |
+		(cx24116_readreg(state, CX24116_REG_SIGNAL) << 6);
+	*signal_strength = 0 - sig_reading;
+
+	dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n",
+		__func__, sig_reading, *signal_strength);
+
+	return 0;
+}
+
+/* SNR (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */
+static int cx24116_read_snr_pct(struct dvb_frontend *fe, u16 *snr)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	u8 snr_reading;
+	static const u32 snr_tab[] = { /* 10 x Table (rounded up) */
+		0x00000, 0x0199A, 0x03333, 0x04ccD, 0x06667,
+		0x08000, 0x0999A, 0x0b333, 0x0cccD, 0x0e667,
+		0x10000, 0x1199A, 0x13333, 0x14ccD, 0x16667,
+		0x18000 };
+
+	dprintk("%s()\n", __func__);
+
+	snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY0);
+
+	if (snr_reading >= 0xa0 /* 100% */)
+		*snr = 0xffff;
+	else
+		*snr = snr_tab[(snr_reading & 0xf0) >> 4] +
+			(snr_tab[(snr_reading & 0x0f)] >> 4);
+
+	dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__,
+		snr_reading, *snr);
+
+	return 0;
+}
+
+/* The reelbox patches show the value in the registers represents
+ * ESNO, from 0->30db (values 0->300). We provide this value by
+ * default.
+ */
+static int cx24116_read_snr_esno(struct dvb_frontend *fe, u16 *snr)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+
+	dprintk("%s()\n", __func__);
+
+	*snr = cx24116_readreg(state, CX24116_REG_QUALITY8) << 8 |
+		cx24116_readreg(state, CX24116_REG_QUALITY0);
+
+	dprintk("%s: raw 0x%04x\n", __func__, *snr);
+
+	return 0;
+}
+
+static int cx24116_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	if (esno_snr == 1)
+		return cx24116_read_snr_esno(fe, snr);
+	else
+		return cx24116_read_snr_pct(fe, snr);
+}
+
+static int cx24116_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+
+	dprintk("%s()\n", __func__);
+
+	*ucblocks = (cx24116_readreg(state, CX24116_REG_UCB8) << 8) |
+		cx24116_readreg(state, CX24116_REG_UCB0);
+
+	return 0;
+}
+
+/* Overwrite the current tuning params, we are about to tune */
+static void cx24116_clone_params(struct dvb_frontend *fe)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur));
+}
+
+/* Wait for LNB */
+static int cx24116_wait_for_lnb(struct dvb_frontend *fe)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	int i;
+
+	dprintk("%s() qstatus = 0x%02x\n", __func__,
+		cx24116_readreg(state, CX24116_REG_QSTATUS));
+
+	/* Wait for up to 300 ms */
+	for (i = 0; i < 30 ; i++) {
+		if (cx24116_readreg(state, CX24116_REG_QSTATUS) & 0x20)
+			return 0;
+		msleep(10);
+	}
+
+	dprintk("%s(): LNB not ready\n", __func__);
+
+	return -ETIMEDOUT; /* -EBUSY ? */
+}
+
+static int cx24116_set_voltage(struct dvb_frontend *fe,
+	fe_sec_voltage_t voltage)
+{
+	struct cx24116_cmd cmd;
+	int ret;
+
+	dprintk("%s: %s\n", __func__,
+		voltage == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" :
+		voltage == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : "??");
+
+	/* Wait for LNB ready */
+	ret = cx24116_wait_for_lnb(fe);
+	if (ret != 0)
+		return ret;
+
+	/* Wait for voltage/min repeat delay */
+	msleep(100);
+
+	cmd.args[0x00] = CMD_LNBDCLEVEL;
+	cmd.args[0x01] = (voltage == SEC_VOLTAGE_18 ? 0x01 : 0x00);
+	cmd.len = 0x02;
+
+	/* Min delay time before DiSEqC send */
+	msleep(15);
+
+	return cx24116_cmd_execute(fe, &cmd);
+}
+
+static int cx24116_set_tone(struct dvb_frontend *fe,
+	fe_sec_tone_mode_t tone)
+{
+	struct cx24116_cmd cmd;
+	int ret;
+
+	dprintk("%s(%d)\n", __func__, tone);
+	if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) {
+		printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone);
+		return -EINVAL;
+	}
+
+	/* Wait for LNB ready */
+	ret = cx24116_wait_for_lnb(fe);
+	if (ret != 0)
+		return ret;
+
+	/* Min delay time after DiSEqC send */
+	msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */
+
+	/* Now we set the tone */
+	cmd.args[0x00] = CMD_SET_TONE;
+	cmd.args[0x01] = 0x00;
+	cmd.args[0x02] = 0x00;
+
+	switch (tone) {
+	case SEC_TONE_ON:
+		dprintk("%s: setting tone on\n", __func__);
+		cmd.args[0x03] = 0x01;
+		break;
+	case SEC_TONE_OFF:
+		dprintk("%s: setting tone off\n", __func__);
+		cmd.args[0x03] = 0x00;
+		break;
+	}
+	cmd.len = 0x04;
+
+	/* Min delay time before DiSEqC send */
+	msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */
+
+	return cx24116_cmd_execute(fe, &cmd);
+}
+
+/* Initialise DiSEqC */
+static int cx24116_diseqc_init(struct dvb_frontend *fe)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	struct cx24116_cmd cmd;
+	int ret;
+
+	/* Firmware CMD 20: LNB/DiSEqC config */
+	cmd.args[0x00] = CMD_LNBCONFIG;
+	cmd.args[0x01] = 0x00;
+	cmd.args[0x02] = 0x10;
+	cmd.args[0x03] = 0x00;
+	cmd.args[0x04] = 0x8f;
+	cmd.args[0x05] = 0x28;
+	cmd.args[0x06] = (toneburst == CX24116_DISEQC_TONEOFF) ? 0x00 : 0x01;
+	cmd.args[0x07] = 0x01;
+	cmd.len = 0x08;
+	ret = cx24116_cmd_execute(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	/* Prepare a DiSEqC command */
+	state->dsec_cmd.args[0x00] = CMD_LNBSEND;
+
+	/* DiSEqC burst */
+	state->dsec_cmd.args[CX24116_DISEQC_BURST]  = CX24116_DISEQC_MINI_A;
+
+	/* Unknown */
+	state->dsec_cmd.args[CX24116_DISEQC_ARG2_2] = 0x02;
+	state->dsec_cmd.args[CX24116_DISEQC_ARG3_0] = 0x00;
+	/* Continuation flag? */
+	state->dsec_cmd.args[CX24116_DISEQC_ARG4_0] = 0x00;
+
+	/* DiSEqC message length */
+	state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = 0x00;
+
+	/* Command length */
+	state->dsec_cmd.len = CX24116_DISEQC_MSGOFS;
+
+	return 0;
+}
+
+/* Send DiSEqC message with derived burst (hack) || previous burst */
+static int cx24116_send_diseqc_msg(struct dvb_frontend *fe,
+	struct dvb_diseqc_master_cmd *d)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	int i, ret;
+
+	/* Dump DiSEqC message */
+	if (debug) {
+		printk(KERN_INFO "cx24116: %s(", __func__);
+		for (i = 0 ; i < d->msg_len ;) {
+			printk(KERN_INFO "0x%02x", d->msg[i]);
+			if (++i < d->msg_len)
+				printk(KERN_INFO ", ");
+		}
+		printk(") toneburst=%d\n", toneburst);
+	}
+
+	/* Validate length */
+	if (d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS))
+		return -EINVAL;
+
+	/* DiSEqC message */
+	for (i = 0; i < d->msg_len; i++)
+		state->dsec_cmd.args[CX24116_DISEQC_MSGOFS + i] = d->msg[i];
+
+	/* DiSEqC message length */
+	state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len;
+
+	/* Command length */
+	state->dsec_cmd.len = CX24116_DISEQC_MSGOFS +
+		state->dsec_cmd.args[CX24116_DISEQC_MSGLEN];
+
+	/* DiSEqC toneburst */
+	if (toneburst == CX24116_DISEQC_MESGCACHE)
+		/* Message is cached */
+		return 0;
+
+	else if (toneburst == CX24116_DISEQC_TONEOFF)
+		/* Message is sent without burst */
+		state->dsec_cmd.args[CX24116_DISEQC_BURST] = 0;
+
+	else if (toneburst == CX24116_DISEQC_TONECACHE) {
+		/*
+		 * Message is sent with derived else cached burst
+		 *
+		 * WRITE PORT GROUP COMMAND 38
+		 *
+		 * 0/A/A: E0 10 38 F0..F3
+		 * 1/B/B: E0 10 38 F4..F7
+		 * 2/C/A: E0 10 38 F8..FB
+		 * 3/D/B: E0 10 38 FC..FF
+		 *
+		 * databyte[3]= 8421:8421
+		 *              ABCD:WXYZ
+		 *              CLR :SET
+		 *
+		 *              WX= PORT SELECT 0..3    (X=TONEBURST)
+		 *              Y = VOLTAGE             (0=13V, 1=18V)
+		 *              Z = BAND                (0=LOW, 1=HIGH(22K))
+		 */
+		if (d->msg_len >= 4 && d->msg[2] == 0x38)
+			state->dsec_cmd.args[CX24116_DISEQC_BURST] =
+				((d->msg[3] & 4) >> 2);
+		if (debug)
+			dprintk("%s burst=%d\n", __func__,
+				state->dsec_cmd.args[CX24116_DISEQC_BURST]);
+	}
+
+	/* Wait for LNB ready */
+	ret = cx24116_wait_for_lnb(fe);
+	if (ret != 0)
+		return ret;
+
+	/* Wait for voltage/min repeat delay */
+	msleep(100);
+
+	/* Command */
+	ret = cx24116_cmd_execute(fe, &state->dsec_cmd);
+	if (ret != 0)
+		return ret;
+	/*
+	 * Wait for send
+	 *
+	 * Eutelsat spec:
+	 * >15ms delay          + (XXX determine if FW does this, see set_tone)
+	 *  13.5ms per byte     +
+	 * >15ms delay          +
+	 *  12.5ms burst        +
+	 * >15ms delay            (XXX determine if FW does this, see set_tone)
+	 */
+	msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) +
+		((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60));
+
+	return 0;
+}
+
+/* Send DiSEqC burst */
+static int cx24116_diseqc_send_burst(struct dvb_frontend *fe,
+	fe_sec_mini_cmd_t burst)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	int ret;
+
+	dprintk("%s(%d) toneburst=%d\n", __func__, burst, toneburst);
+
+	/* DiSEqC burst */
+	if (burst == SEC_MINI_A)
+		state->dsec_cmd.args[CX24116_DISEQC_BURST] =
+			CX24116_DISEQC_MINI_A;
+	else if (burst == SEC_MINI_B)
+		state->dsec_cmd.args[CX24116_DISEQC_BURST] =
+			CX24116_DISEQC_MINI_B;
+	else
+		return -EINVAL;
+
+	/* DiSEqC toneburst */
+	if (toneburst != CX24116_DISEQC_MESGCACHE)
+		/* Burst is cached */
+		return 0;
+
+	/* Burst is to be sent with cached message */
+
+	/* Wait for LNB ready */
+	ret = cx24116_wait_for_lnb(fe);
+	if (ret != 0)
+		return ret;
+
+	/* Wait for voltage/min repeat delay */
+	msleep(100);
+
+	/* Command */
+	ret = cx24116_cmd_execute(fe, &state->dsec_cmd);
+	if (ret != 0)
+		return ret;
+
+	/*
+	 * Wait for send
+	 *
+	 * Eutelsat spec:
+	 * >15ms delay          + (XXX determine if FW does this, see set_tone)
+	 *  13.5ms per byte     +
+	 * >15ms delay          +
+	 *  12.5ms burst        +
+	 * >15ms delay            (XXX determine if FW does this, see set_tone)
+	 */
+	msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60);
+
+	return 0;
+}
+
+static void cx24116_release(struct dvb_frontend *fe)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	dprintk("%s\n", __func__);
+	kfree(state);
+}
+
+static struct dvb_frontend_ops cx24116_ops;
+
+struct dvb_frontend *cx24116_attach(const struct cx24116_config *config,
+	struct i2c_adapter *i2c)
+{
+	struct cx24116_state *state = NULL;
+	int ret;
+
+	dprintk("%s\n", __func__);
+
+	/* allocate memory for the internal state */
+	state = kzalloc(sizeof(struct cx24116_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error1;
+
+	state->config = config;
+	state->i2c = i2c;
+
+	/* check if the demod is present */
+	ret = (cx24116_readreg(state, 0xFF) << 8) |
+		cx24116_readreg(state, 0xFE);
+	if (ret != 0x0501) {
+		printk(KERN_INFO "Invalid probe, probably not a CX24116 device\n");
+		goto error2;
+	}
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &cx24116_ops,
+		sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+
+error2: kfree(state);
+error1: return NULL;
+}
+EXPORT_SYMBOL(cx24116_attach);
+
+/*
+ * Initialise or wake up device
+ *
+ * Power config will reset and load initial firmware if required
+ */
+static int cx24116_initfe(struct dvb_frontend *fe)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	struct cx24116_cmd cmd;
+	int ret;
+
+	dprintk("%s()\n", __func__);
+
+	/* Power on */
+	cx24116_writereg(state, 0xe0, 0);
+	cx24116_writereg(state, 0xe1, 0);
+	cx24116_writereg(state, 0xea, 0);
+
+	/* Firmware CMD 36: Power config */
+	cmd.args[0x00] = CMD_TUNERSLEEP;
+	cmd.args[0x01] = 0;
+	cmd.len = 0x02;
+	ret = cx24116_cmd_execute(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	ret = cx24116_diseqc_init(fe);
+	if (ret != 0)
+		return ret;
+
+	/* HVR-4000 needs this */
+	return cx24116_set_voltage(fe, SEC_VOLTAGE_13);
+}
+
+/*
+ * Put device to sleep
+ */
+static int cx24116_sleep(struct dvb_frontend *fe)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	struct cx24116_cmd cmd;
+	int ret;
+
+	dprintk("%s()\n", __func__);
+
+	/* Firmware CMD 36: Power config */
+	cmd.args[0x00] = CMD_TUNERSLEEP;
+	cmd.args[0x01] = 1;
+	cmd.len = 0x02;
+	ret = cx24116_cmd_execute(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	/* Power off (Shutdown clocks) */
+	cx24116_writereg(state, 0xea, 0xff);
+	cx24116_writereg(state, 0xe1, 1);
+	cx24116_writereg(state, 0xe0, 1);
+
+	return 0;
+}
+
+/* dvb-core told us to tune, the tv property cache will be complete,
+ * it's safe for is to pull values and use them for tuning purposes.
+ */
+static int cx24116_set_frontend(struct dvb_frontend *fe)
+{
+	struct cx24116_state *state = fe->demodulator_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct cx24116_cmd cmd;
+	fe_status_t tunerstat;
+	int i, status, ret, retune = 1;
+
+	dprintk("%s()\n", __func__);
+
+	switch (c->delivery_system) {
+	case SYS_DVBS:
+		dprintk("%s: DVB-S delivery system selected\n", __func__);
+
+		/* Only QPSK is supported for DVB-S */
+		if (c->modulation != QPSK) {
+			dprintk("%s: unsupported modulation selected (%d)\n",
+				__func__, c->modulation);
+			return -EOPNOTSUPP;
+		}
+
+		/* Pilot doesn't exist in DVB-S, turn bit off */
+		state->dnxt.pilot_val = CX24116_PILOT_OFF;
+
+		/* DVB-S only supports 0.35 */
+		if (c->rolloff != ROLLOFF_35) {
+			dprintk("%s: unsupported rolloff selected (%d)\n",
+				__func__, c->rolloff);
+			return -EOPNOTSUPP;
+		}
+		state->dnxt.rolloff_val = CX24116_ROLLOFF_035;
+		break;
+
+	case SYS_DVBS2:
+		dprintk("%s: DVB-S2 delivery system selected\n", __func__);
+
+		/*
+		 * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2,
+		 * but not hardware auto detection
+		 */
+		if (c->modulation != PSK_8 && c->modulation != QPSK) {
+			dprintk("%s: unsupported modulation selected (%d)\n",
+				__func__, c->modulation);
+			return -EOPNOTSUPP;
+		}
+
+		switch (c->pilot) {
+		case PILOT_AUTO:	/* Not supported but emulated */
+			state->dnxt.pilot_val = (c->modulation == QPSK)
+				? CX24116_PILOT_OFF : CX24116_PILOT_ON;
+			retune++;
+			break;
+		case PILOT_OFF:
+			state->dnxt.pilot_val = CX24116_PILOT_OFF;
+			break;
+		case PILOT_ON:
+			state->dnxt.pilot_val = CX24116_PILOT_ON;
+			break;
+		default:
+			dprintk("%s: unsupported pilot mode selected (%d)\n",
+				__func__, c->pilot);
+			return -EOPNOTSUPP;
+		}
+
+		switch (c->rolloff) {
+		case ROLLOFF_20:
+			state->dnxt.rolloff_val = CX24116_ROLLOFF_020;
+			break;
+		case ROLLOFF_25:
+			state->dnxt.rolloff_val = CX24116_ROLLOFF_025;
+			break;
+		case ROLLOFF_35:
+			state->dnxt.rolloff_val = CX24116_ROLLOFF_035;
+			break;
+		case ROLLOFF_AUTO:	/* Rolloff must be explicit */
+		default:
+			dprintk("%s: unsupported rolloff selected (%d)\n",
+				__func__, c->rolloff);
+			return -EOPNOTSUPP;
+		}
+		break;
+
+	default:
+		dprintk("%s: unsupported delivery system selected (%d)\n",
+			__func__, c->delivery_system);
+		return -EOPNOTSUPP;
+	}
+	state->dnxt.delsys = c->delivery_system;
+	state->dnxt.modulation = c->modulation;
+	state->dnxt.frequency = c->frequency;
+	state->dnxt.pilot = c->pilot;
+	state->dnxt.rolloff = c->rolloff;
+
+	ret = cx24116_set_inversion(state, c->inversion);
+	if (ret !=  0)
+		return ret;
+
+	/* FEC_NONE/AUTO for DVB-S2 is not supported and detected here */
+	ret = cx24116_set_fec(state, c->delivery_system, c->modulation, c->fec_inner);
+	if (ret !=  0)
+		return ret;
+
+	ret = cx24116_set_symbolrate(state, c->symbol_rate);
+	if (ret !=  0)
+		return ret;
+
+	/* discard the 'current' tuning parameters and prepare to tune */
+	cx24116_clone_params(fe);
+
+	dprintk("%s:   delsys      = %d\n", __func__, state->dcur.delsys);
+	dprintk("%s:   modulation  = %d\n", __func__, state->dcur.modulation);
+	dprintk("%s:   frequency   = %d\n", __func__, state->dcur.frequency);
+	dprintk("%s:   pilot       = %d (val = 0x%02x)\n", __func__,
+		state->dcur.pilot, state->dcur.pilot_val);
+	dprintk("%s:   retune      = %d\n", __func__, retune);
+	dprintk("%s:   rolloff     = %d (val = 0x%02x)\n", __func__,
+		state->dcur.rolloff, state->dcur.rolloff_val);
+	dprintk("%s:   symbol_rate = %d\n", __func__, state->dcur.symbol_rate);
+	dprintk("%s:   FEC         = %d (mask/val = 0x%02x/0x%02x)\n", __func__,
+		state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val);
+	dprintk("%s:   Inversion   = %d (val = 0x%02x)\n", __func__,
+		state->dcur.inversion, state->dcur.inversion_val);
+
+	/* This is also done in advise/acquire on HVR4000 but not on LITE */
+	if (state->config->set_ts_params)
+		state->config->set_ts_params(fe, 0);
+
+	/* Set/Reset B/W */
+	cmd.args[0x00] = CMD_BANDWIDTH;
+	cmd.args[0x01] = 0x01;
+	cmd.len = 0x02;
+	ret = cx24116_cmd_execute(fe, &cmd);
+	if (ret != 0)
+		return ret;
+
+	/* Prepare a tune request */
+	cmd.args[0x00] = CMD_TUNEREQUEST;
+
+	/* Frequency */
+	cmd.args[0x01] = (state->dcur.frequency & 0xff0000) >> 16;
+	cmd.args[0x02] = (state->dcur.frequency & 0x00ff00) >> 8;
+	cmd.args[0x03] = (state->dcur.frequency & 0x0000ff);
+
+	/* Symbol Rate */
+	cmd.args[0x04] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8;
+	cmd.args[0x05] = ((state->dcur.symbol_rate / 1000) & 0x00ff);
+
+	/* Automatic Inversion */
+	cmd.args[0x06] = state->dcur.inversion_val;
+
+	/* Modulation / FEC / Pilot */
+	cmd.args[0x07] = state->dcur.fec_val | state->dcur.pilot_val;
+
+	cmd.args[0x08] = CX24116_SEARCH_RANGE_KHZ >> 8;
+	cmd.args[0x09] = CX24116_SEARCH_RANGE_KHZ & 0xff;
+	cmd.args[0x0a] = 0x00;
+	cmd.args[0x0b] = 0x00;
+	cmd.args[0x0c] = state->dcur.rolloff_val;
+	cmd.args[0x0d] = state->dcur.fec_mask;
+
+	if (state->dcur.symbol_rate > 30000000) {
+		cmd.args[0x0e] = 0x04;
+		cmd.args[0x0f] = 0x00;
+		cmd.args[0x10] = 0x01;
+		cmd.args[0x11] = 0x77;
+		cmd.args[0x12] = 0x36;
+		cx24116_writereg(state, CX24116_REG_CLKDIV, 0x44);
+		cx24116_writereg(state, CX24116_REG_RATEDIV, 0x01);
+	} else {
+		cmd.args[0x0e] = 0x06;
+		cmd.args[0x0f] = 0x00;
+		cmd.args[0x10] = 0x00;
+		cmd.args[0x11] = 0xFA;
+		cmd.args[0x12] = 0x24;
+		cx24116_writereg(state, CX24116_REG_CLKDIV, 0x46);
+		cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00);
+	}
+
+	cmd.len = 0x13;
+
+	/* We need to support pilot and non-pilot tuning in the
+	 * driver automatically. This is a workaround for because
+	 * the demod does not support autodetect.
+	 */
+	do {
+		/* Reset status register */
+		status = cx24116_readreg(state, CX24116_REG_SSTATUS)
+			& CX24116_SIGNAL_MASK;
+		cx24116_writereg(state, CX24116_REG_SSTATUS, status);
+
+		/* Tune */
+		ret = cx24116_cmd_execute(fe, &cmd);
+		if (ret != 0)
+			break;
+
+		/*
+		 * Wait for up to 500 ms before retrying
+		 *
+		 * If we are able to tune then generally it occurs within 100ms.
+		 * If it takes longer, try a different toneburst setting.
+		 */
+		for (i = 0; i < 50 ; i++) {
+			cx24116_read_status(fe, &tunerstat);
+			status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC);
+			if (status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) {
+				dprintk("%s: Tuned\n", __func__);
+				goto tuned;
+			}
+			msleep(10);
+		}
+
+		dprintk("%s: Not tuned\n", __func__);
+
+		/* Toggle pilot bit when in auto-pilot */
+		if (state->dcur.pilot == PILOT_AUTO)
+			cmd.args[0x07] ^= CX24116_PILOT_ON;
+	} while (--retune);
+
+tuned:  /* Set/Reset B/W */
+	cmd.args[0x00] = CMD_BANDWIDTH;
+	cmd.args[0x01] = 0x00;
+	cmd.len = 0x02;
+	return cx24116_cmd_execute(fe, &cmd);
+}
+
+static int cx24116_tune(struct dvb_frontend *fe, bool re_tune,
+	unsigned int mode_flags, unsigned int *delay, fe_status_t *status)
+{
+	/*
+	 * It is safe to discard "params" here, as the DVB core will sync
+	 * fe->dtv_property_cache with fepriv->parameters_in, where the
+	 * DVBv3 params are stored. The only practical usage for it indicate
+	 * that re-tuning is needed, e. g. (fepriv->state & FESTATE_RETUNE) is
+	 * true.
+	 */
+
+	*delay = HZ / 5;
+	if (re_tune) {
+		int ret = cx24116_set_frontend(fe);
+		if (ret)
+			return ret;
+	}
+	return cx24116_read_status(fe, status);
+}
+
+static int cx24116_get_algo(struct dvb_frontend *fe)
+{
+	return DVBFE_ALGO_HW;
+}
+
+static struct dvb_frontend_ops cx24116_ops = {
+	.delsys = { SYS_DVBS, SYS_DVBS2 },
+	.info = {
+		.name = "Conexant CX24116/CX24118",
+		.frequency_min = 950000,
+		.frequency_max = 2150000,
+		.frequency_stepsize = 1011, /* kHz for QPSK frontends */
+		.frequency_tolerance = 5000,
+		.symbol_rate_min = 1000000,
+		.symbol_rate_max = 45000000,
+		.caps = FE_CAN_INVERSION_AUTO |
+			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+			FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_2G_MODULATION |
+			FE_CAN_QPSK | FE_CAN_RECOVER
+	},
+
+	.release = cx24116_release,
+
+	.init = cx24116_initfe,
+	.sleep = cx24116_sleep,
+	.read_status = cx24116_read_status,
+	.read_ber = cx24116_read_ber,
+	.read_signal_strength = cx24116_read_signal_strength,
+	.read_snr = cx24116_read_snr,
+	.read_ucblocks = cx24116_read_ucblocks,
+	.set_tone = cx24116_set_tone,
+	.set_voltage = cx24116_set_voltage,
+	.diseqc_send_master_cmd = cx24116_send_diseqc_msg,
+	.diseqc_send_burst = cx24116_diseqc_send_burst,
+	.get_frontend_algo = cx24116_get_algo,
+	.tune = cx24116_tune,
+
+	.set_frontend = cx24116_set_frontend,
+};
+
+MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware");
+MODULE_AUTHOR("Steven Toth");
+MODULE_LICENSE("GPL");
+