Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 435 insertions, 0 deletions

diff --git a/drivers/media/dvb/dvb-usb/ec168.c b/drivers/media/dvb/dvb-usb/ec168.c
new file mode 100644
index 00000000..b4989ba8
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/ec168.c
@@ -0,0 +1,435 @@
+/*
+ * E3C EC168 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "ec168.h"
+#include "ec100.h"
+#include "mxl5005s.h"
+
+/* debug */
+static int dvb_usb_ec168_debug;
+module_param_named(debug, dvb_usb_ec168_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static struct ec100_config ec168_ec100_config;
+
+static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req)
+{
+	int ret;
+	unsigned int pipe;
+	u8 request, requesttype;
+	u8 *buf;
+
+
+
+	switch (req->cmd) {
+	case DOWNLOAD_FIRMWARE:
+	case GPIO:
+	case WRITE_I2C:
+	case STREAMING_CTRL:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+		request = req->cmd;
+		break;
+	case READ_I2C:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+		request = req->cmd;
+		break;
+	case GET_CONFIG:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+		request = CONFIG;
+		break;
+	case SET_CONFIG:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+		request = CONFIG;
+		break;
+	case WRITE_DEMOD:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+		request = DEMOD_RW;
+		break;
+	case READ_DEMOD:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+		request = DEMOD_RW;
+		break;
+	default:
+		err("unknown command:%02x", req->cmd);
+		ret = -EPERM;
+		goto error;
+	}
+
+	buf = kmalloc(req->size, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
+		/* write */
+		memcpy(buf, req->data, req->size);
+		pipe = usb_sndctrlpipe(udev, 0);
+	} else {
+		/* read */
+		pipe = usb_rcvctrlpipe(udev, 0);
+	}
+
+	msleep(1); /* avoid I2C errors */
+
+	ret = usb_control_msg(udev, pipe, request, requesttype, req->value,
+		req->index, buf, req->size, EC168_USB_TIMEOUT);
+
+	ec168_debug_dump(request, requesttype, req->value, req->index, buf,
+		req->size, deb_xfer);
+
+	if (ret < 0)
+		goto err_dealloc;
+	else
+		ret = 0;
+
+	/* read request, copy returned data to return buf */
+	if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
+		memcpy(req->data, buf, req->size);
+
+	kfree(buf);
+	return ret;
+
+err_dealloc:
+	kfree(buf);
+error:
+	deb_info("%s: failed:%d\n", __func__, ret);
+	return ret;
+}
+
+static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
+{
+	return ec168_rw_udev(d->udev, req);
+}
+
+/* I2C */
+static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+	int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	struct ec168_req req;
+	int i = 0;
+	int ret;
+
+	if (num > 2)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	while (i < num) {
+		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+			if (msg[i].addr == ec168_ec100_config.demod_address) {
+				req.cmd = READ_DEMOD;
+				req.value = 0;
+				req.index = 0xff00 + msg[i].buf[0]; /* reg */
+				req.size = msg[i+1].len; /* bytes to read */
+				req.data = &msg[i+1].buf[0];
+				ret = ec168_ctrl_msg(d, &req);
+				i += 2;
+			} else {
+				err("I2C read not implemented");
+				ret = -ENOSYS;
+				i += 2;
+			}
+		} else {
+			if (msg[i].addr == ec168_ec100_config.demod_address) {
+				req.cmd = WRITE_DEMOD;
+				req.value = msg[i].buf[1]; /* val */
+				req.index = 0xff00 + msg[i].buf[0]; /* reg */
+				req.size = 0;
+				req.data = NULL;
+				ret = ec168_ctrl_msg(d, &req);
+				i += 1;
+			} else {
+				req.cmd = WRITE_I2C;
+				req.value = msg[i].buf[0]; /* val */
+				req.index = 0x0100 + msg[i].addr; /* I2C addr */
+				req.size = msg[i].len-1;
+				req.data = &msg[i].buf[1];
+				ret = ec168_ctrl_msg(d, &req);
+				i += 1;
+			}
+		}
+		if (ret)
+			goto error;
+
+	}
+	ret = i;
+
+error:
+	mutex_unlock(&d->i2c_mutex);
+	return i;
+}
+
+
+static u32 ec168_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm ec168_i2c_algo = {
+	.master_xfer   = ec168_i2c_xfer,
+	.functionality = ec168_i2c_func,
+};
+
+/* Callbacks for DVB USB */
+static struct ec100_config ec168_ec100_config = {
+	.demod_address = 0xff, /* not real address, demod is integrated */
+};
+
+static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	deb_info("%s:\n", __func__);
+	adap->fe_adap[0].fe = dvb_attach(ec100_attach, &ec168_ec100_config,
+		&adap->dev->i2c_adap);
+	if (adap->fe_adap[0].fe == NULL)
+		return -ENODEV;
+
+	return 0;
+}
+
+static struct mxl5005s_config ec168_mxl5003s_config = {
+	.i2c_address     = 0xc6,
+	.if_freq         = IF_FREQ_4570000HZ,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_OFF,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.AgcMasterByte   = 0x00,
+};
+
+static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	deb_info("%s:\n", __func__);
+	return dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
+		&ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
+}
+
+static int ec168_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
+	deb_info("%s: onoff:%d\n", __func__, onoff);
+	if (onoff)
+		req.index = 0x0102;
+	return ec168_ctrl_msg(adap->dev, &req);
+}
+
+static int ec168_download_firmware(struct usb_device *udev,
+	const struct firmware *fw)
+{
+	int i, len, packets, remainder, ret;
+	u16 addr = 0x0000; /* firmware start address */
+	struct ec168_req req = {DOWNLOAD_FIRMWARE, 0, 0, 0, NULL};
+	deb_info("%s:\n", __func__);
+
+	#define FW_PACKET_MAX_DATA  2048
+	packets = fw->size / FW_PACKET_MAX_DATA;
+	remainder = fw->size % FW_PACKET_MAX_DATA;
+	len = FW_PACKET_MAX_DATA;
+	for (i = 0; i <= packets; i++) {
+		if (i == packets)  /* set size of the last packet */
+			len = remainder;
+
+		req.size = len;
+		req.data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA);
+		req.index = addr;
+		addr += FW_PACKET_MAX_DATA;
+
+		ret = ec168_rw_udev(udev, &req);
+		if (ret) {
+			err("firmware download failed:%d packet:%d", ret, i);
+			goto error;
+		}
+	}
+	req.size = 0;
+
+	/* set "warm"? */
+	req.cmd = SET_CONFIG;
+	req.value = 0;
+	req.index = 0x0001;
+	ret = ec168_rw_udev(udev, &req);
+	if (ret)
+		goto error;
+
+	/* really needed - no idea what does */
+	req.cmd = GPIO;
+	req.value = 0;
+	req.index = 0x0206;
+	ret = ec168_rw_udev(udev, &req);
+	if (ret)
+		goto error;
+
+	/* activate tuner I2C? */
+	req.cmd = WRITE_I2C;
+	req.value = 0;
+	req.index = 0x00c6;
+	ret = ec168_rw_udev(udev, &req);
+	if (ret)
+		goto error;
+
+	return ret;
+error:
+	deb_info("%s: failed:%d\n", __func__, ret);
+	return ret;
+}
+
+static int ec168_identify_state(struct usb_device *udev,
+	struct dvb_usb_device_properties *props,
+	struct dvb_usb_device_description **desc, int *cold)
+{
+	int ret;
+	u8 reply;
+	struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
+	deb_info("%s:\n", __func__);
+
+	ret = ec168_rw_udev(udev, &req);
+	if (ret)
+		goto error;
+
+	deb_info("%s: reply:%02x\n", __func__, reply);
+
+	if (reply == 0x01)
+		*cold = 0;
+	else
+		*cold = 1;
+
+	return ret;
+error:
+	deb_info("%s: failed:%d\n", __func__, ret);
+	return ret;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties ec168_properties;
+
+static int ec168_probe(struct usb_interface *intf,
+	const struct usb_device_id *id)
+{
+	int ret;
+	deb_info("%s: interface:%d\n", __func__,
+		intf->cur_altsetting->desc.bInterfaceNumber);
+
+	ret = dvb_usb_device_init(intf, &ec168_properties, THIS_MODULE, NULL,
+		adapter_nr);
+	if (ret)
+		goto error;
+
+	return ret;
+error:
+	deb_info("%s: failed:%d\n", __func__, ret);
+	return ret;
+}
+
+#define E3C_EC168_1689                          0
+#define E3C_EC168_FFFA                          1
+#define E3C_EC168_FFFB                          2
+#define E3C_EC168_1001                          3
+#define E3C_EC168_1002                          4
+
+static struct usb_device_id ec168_id[] = {
+	[E3C_EC168_1689] =
+		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168)},
+	[E3C_EC168_FFFA] =
+		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2)},
+	[E3C_EC168_FFFB] =
+		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3)},
+	[E3C_EC168_1001] =
+		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4)},
+	[E3C_EC168_1002] =
+		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5)},
+	{} /* terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ec168_id);
+
+static struct dvb_usb_device_properties ec168_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl = DEVICE_SPECIFIC,
+	.download_firmware = ec168_download_firmware,
+	.firmware = "dvb-usb-ec168.fw",
+	.no_reconnect = 1,
+
+	.size_of_priv = 0,
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+		.num_frontends = 1,
+		.fe = {{
+			.streaming_ctrl   = ec168_streaming_ctrl,
+			.frontend_attach  = ec168_ec100_frontend_attach,
+			.tuner_attach     = ec168_mxl5003s_tuner_attach,
+			.stream = {
+				.type = USB_BULK,
+				.count = 6,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = (32*512),
+					}
+				}
+			},
+		}},
+		}
+	},
+
+	.identify_state = ec168_identify_state,
+
+	.i2c_algo = &ec168_i2c_algo,
+
+	.num_device_descs = 1,
+	.devices = {
+		{
+			.name = "E3C EC168 DVB-T USB2.0 reference design",
+			.cold_ids = {
+				&ec168_id[E3C_EC168_1689],
+				&ec168_id[E3C_EC168_FFFA],
+				&ec168_id[E3C_EC168_FFFB],
+				&ec168_id[E3C_EC168_1001],
+				&ec168_id[E3C_EC168_1002],
+				NULL},
+			.warm_ids = {NULL},
+		},
+	}
+};
+
+static struct usb_driver ec168_driver = {
+	.name       = "dvb_usb_ec168",
+	.probe      = ec168_probe,
+	.disconnect = dvb_usb_device_exit,
+	.id_table   = ec168_id,
+};
+
+module_usb_driver(ec168_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("E3C EC168 DVB-T USB2.0 driver");
+MODULE_LICENSE("GPL");