Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 1406 insertions, 0 deletions

diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
new file mode 100644
index 00000000..03c28655
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -0,0 +1,1406 @@
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
+ * module registers serial interface that can be used to communicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#include "anysee.h"
+#include "tda1002x.h"
+#include "mt352.h"
+#include "mt352_priv.h"
+#include "zl10353.h"
+#include "tda18212.h"
+#include "cx24116.h"
+#include "stv0900.h"
+#include "stv6110.h"
+#include "isl6423.h"
+#include "cxd2820r.h"
+
+/* debug */
+static int dvb_usb_anysee_debug;
+module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
+static int dvb_usb_anysee_delsys;
+module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644);
+MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)");
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static DEFINE_MUTEX(anysee_usb_mutex);
+
+static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
+	u8 *rbuf, u8 rlen)
+{
+	struct anysee_state *state = d->priv;
+	int act_len, ret, i;
+	u8 buf[64];
+
+	memcpy(&buf[0], sbuf, slen);
+	buf[60] = state->seq++;
+
+	if (mutex_lock_interruptible(&anysee_usb_mutex) < 0)
+		return -EAGAIN;
+
+	deb_xfer(">>> ");
+	debug_dump(buf, slen, deb_xfer);
+
+	/* We need receive one message more after dvb_usb_generic_rw due
+	   to weird transaction flow, which is 1 x send + 2 x receive. */
+	ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0);
+	if (ret)
+		goto error_unlock;
+
+	/* TODO FIXME: dvb_usb_generic_rw() fails rarely with error code -32
+	 * (EPIPE, Broken pipe). Function supports currently msleep() as a
+	 * parameter but I would not like to use it, since according to
+	 * Documentation/timers/timers-howto.txt it should not be used such
+	 * short, under < 20ms, sleeps. Repeating failed message would be
+	 * better choice as not to add unwanted delays...
+	 * Fixing that correctly is one of those or both;
+	 * 1) use repeat if possible
+	 * 2) add suitable delay
+	 */
+
+	/* get answer, retry few times if error returned */
+	for (i = 0; i < 3; i++) {
+		/* receive 2nd answer */
+		ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
+			d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf),
+			&act_len, 2000);
+
+		if (ret) {
+			deb_info("%s: recv bulk message failed: %d",
+					__func__, ret);
+		} else {
+			deb_xfer("<<< ");
+			debug_dump(buf, rlen, deb_xfer);
+
+			if (buf[63] != 0x4f)
+				deb_info("%s: cmd failed\n", __func__);
+
+			break;
+		}
+	}
+
+	if (ret) {
+		/* all retries failed, it is fatal */
+		err("%s: recv bulk message failed: %d", __func__, ret);
+		goto error_unlock;
+	}
+
+	/* read request, copy returned data to return buf */
+	if (rbuf && rlen)
+		memcpy(rbuf, buf, rlen);
+
+error_unlock:
+	mutex_unlock(&anysee_usb_mutex);
+
+	return ret;
+}
+
+static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
+{
+	u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01};
+	int ret;
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1);
+	deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val);
+	return ret;
+}
+
+static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
+{
+	u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val};
+	deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+/* write single register with mask */
+static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
+	u8 mask)
+{
+	int ret;
+	u8 tmp;
+
+	/* no need for read if whole reg is written */
+	if (mask != 0xff) {
+		ret = anysee_read_reg(d, reg, &tmp);
+		if (ret)
+			return ret;
+
+		val &= mask;
+		tmp &= ~mask;
+		val |= tmp;
+	}
+
+	return anysee_write_reg(d, reg, val);
+}
+
+/* read single register with mask */
+static int anysee_rd_reg_mask(struct dvb_usb_device *d, u16 reg, u8 *val,
+	u8 mask)
+{
+	int ret, i;
+	u8 tmp;
+
+	ret = anysee_read_reg(d, reg, &tmp);
+	if (ret)
+		return ret;
+
+	tmp &= mask;
+
+	/* find position of the first bit */
+	for (i = 0; i < 8; i++) {
+		if ((mask >> i) & 0x01)
+			break;
+	}
+	*val = tmp >> i;
+
+	return 0;
+}
+
+static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
+{
+	u8 buf[] = {CMD_GET_HW_INFO};
+	return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3);
+}
+
+static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00};
+	deb_info("%s: onoff:%02x\n", __func__, onoff);
+	return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval)
+{
+	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval};
+	deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff)
+{
+	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff};
+	deb_info("%s: onoff:%02x\n", __func__, onoff);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+/* I2C */
+static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+	int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int ret = 0, inc, i = 0;
+	u8 buf[52]; /* 4 + 48 (I2C WR USB command header + I2C WR max) */
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	while (i < num) {
+		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+			if (msg[i].len > 2 || msg[i+1].len > 60) {
+				ret = -EOPNOTSUPP;
+				break;
+			}
+			buf[0] = CMD_I2C_READ;
+			buf[1] = (msg[i].addr << 1) | 0x01;
+			buf[2] = msg[i].buf[0];
+			buf[3] = msg[i].buf[1];
+			buf[4] = msg[i].len-1;
+			buf[5] = msg[i+1].len;
+			ret = anysee_ctrl_msg(d, buf, 6, msg[i+1].buf,
+				msg[i+1].len);
+			inc = 2;
+		} else {
+			if (msg[i].len > 48) {
+				ret = -EOPNOTSUPP;
+				break;
+			}
+			buf[0] = CMD_I2C_WRITE;
+			buf[1] = (msg[i].addr << 1);
+			buf[2] = msg[i].len;
+			buf[3] = 0x01;
+			memcpy(&buf[4], msg[i].buf, msg[i].len);
+			ret = anysee_ctrl_msg(d, buf, 4 + msg[i].len, NULL, 0);
+			inc = 1;
+		}
+		if (ret)
+			break;
+
+		i += inc;
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+
+	return ret ? ret : i;
+}
+
+static u32 anysee_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm anysee_i2c_algo = {
+	.master_xfer   = anysee_master_xfer,
+	.functionality = anysee_i2c_func,
+};
+
+static int anysee_mt352_demod_init(struct dvb_frontend *fe)
+{
+	static u8 clock_config[]   = { CLOCK_CTL,  0x38, 0x28 };
+	static u8 reset[]          = { RESET,      0x80 };
+	static u8 adc_ctl_1_cfg[]  = { ADC_CTL_1,  0x40 };
+	static u8 agc_cfg[]        = { AGC_TARGET, 0x28, 0x20 };
+	static u8 gpp_ctl_cfg[]    = { GPP_CTL,    0x33 };
+	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+	return 0;
+}
+
+/* Callbacks for DVB USB */
+static struct tda10023_config anysee_tda10023_config = {
+	.demod_address = (0x1a >> 1),
+	.invert = 0,
+	.xtal   = 16000000,
+	.pll_m  = 11,
+	.pll_p  = 3,
+	.pll_n  = 1,
+	.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C,
+	.deltaf = 0xfeeb,
+};
+
+static struct mt352_config anysee_mt352_config = {
+	.demod_address = (0x1e >> 1),
+	.demod_init    = anysee_mt352_demod_init,
+};
+
+static struct zl10353_config anysee_zl10353_config = {
+	.demod_address = (0x1e >> 1),
+	.parallel_ts = 1,
+};
+
+static struct zl10353_config anysee_zl10353_tda18212_config2 = {
+	.demod_address = (0x1e >> 1),
+	.parallel_ts = 1,
+	.disable_i2c_gate_ctrl = 1,
+	.no_tuner = 1,
+	.if2 = 41500,
+};
+
+static struct zl10353_config anysee_zl10353_tda18212_config = {
+	.demod_address = (0x18 >> 1),
+	.parallel_ts = 1,
+	.disable_i2c_gate_ctrl = 1,
+	.no_tuner = 1,
+	.if2 = 41500,
+};
+
+static struct tda10023_config anysee_tda10023_tda18212_config = {
+	.demod_address = (0x1a >> 1),
+	.xtal   = 16000000,
+	.pll_m  = 12,
+	.pll_p  = 3,
+	.pll_n  = 1,
+	.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_B,
+	.deltaf = 0xba02,
+};
+
+static struct tda18212_config anysee_tda18212_config = {
+	.i2c_address = (0xc0 >> 1),
+	.if_dvbt_6 = 4150,
+	.if_dvbt_7 = 4150,
+	.if_dvbt_8 = 4150,
+	.if_dvbc = 5000,
+};
+
+static struct tda18212_config anysee_tda18212_config2 = {
+	.i2c_address = 0x60 /* (0xc0 >> 1) */,
+	.if_dvbt_6 = 3550,
+	.if_dvbt_7 = 3700,
+	.if_dvbt_8 = 4150,
+	.if_dvbt2_6 = 3250,
+	.if_dvbt2_7 = 4000,
+	.if_dvbt2_8 = 4000,
+	.if_dvbc = 5000,
+};
+
+static struct cx24116_config anysee_cx24116_config = {
+	.demod_address = (0xaa >> 1),
+	.mpg_clk_pos_pol = 0x00,
+	.i2c_wr_max = 48,
+};
+
+static struct stv0900_config anysee_stv0900_config = {
+	.demod_address = (0xd0 >> 1),
+	.demod_mode = 0,
+	.xtal = 8000000,
+	.clkmode = 3,
+	.diseqc_mode = 2,
+	.tun1_maddress = 0,
+	.tun1_adc = 1, /* 1 Vpp */
+	.path1_mode = 3,
+};
+
+static struct stv6110_config anysee_stv6110_config = {
+	.i2c_address = (0xc0 >> 1),
+	.mclk = 16000000,
+	.clk_div = 1,
+};
+
+static struct isl6423_config anysee_isl6423_config = {
+	.current_max = SEC_CURRENT_800m,
+	.curlim  = SEC_CURRENT_LIM_OFF,
+	.mod_extern = 1,
+	.addr = (0x10 >> 1),
+};
+
+static struct cxd2820r_config anysee_cxd2820r_config = {
+	.i2c_address = 0x6d, /* (0xda >> 1) */
+	.ts_mode = 0x38,
+};
+
+/*
+ * New USB device strings: Mfr=1, Product=2, SerialNumber=0
+ * Manufacturer: AMT.CO.KR
+ *
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
+ * PCB: ?
+ * parts: DNOS404ZH102A(MT352, DTT7579(?))
+ *
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)"
+ * PCB: PCB 507T (rev1.61)
+ * parts: DNOS404ZH103A(ZL10353, DTT7579(?))
+ * OEA=0a OEB=00 OEC=00 OED=ff OEE=00
+ * IOA=45 IOB=ff IOC=00 IOD=ff IOE=00
+ *
+ * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
+ * PCB: 507CD (rev1.1)
+ * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01
+ * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
+ * IOA=4f IOB=ff IOC=00 IOD=06 IOE=01
+ * IOD[0] ZL10353 1=enabled
+ * IOA[7] TS 0=enabled
+ * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
+ *
+ * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
+ * PCB: 507DC (rev0.2)
+ * parts: TDA10023, DTOS403IH102B TM, CST56I01
+ * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
+ * IOA=4f IOB=ff IOC=00 IOD=26 IOE=01
+ * IOD[0] TDA10023 1=enabled
+ *
+ * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)"
+ * PCB: 507SI (rev2.1)
+ * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=fe
+ * IOA=4d IOB=ff IOC=00 IOD=26 IOE=01
+ * IOD[0] CX24116 1=enabled
+ *
+ * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
+ * PCB: 507FA (rev0.4)
+ * parts: TDA10023, DTOS403IH102B TM, TDA8024
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
+ * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] tuner 1=enabled
+ *
+ * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
+ * PCB: 507FA (rev1.1)
+ * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
+ * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
+ * DVB-C:
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] tuner 1=enabled
+ * DVB-T:
+ * IOD[0] ZL10353 1=enabled
+ * IOE[0] tuner 0=enabled
+ * tuner is behind ZL10353 I2C-gate
+ *
+ * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
+ * PCB: 508TC (rev0.6)
+ * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[4] TDA18212 1=enabled
+ * DVB-C:
+ * IOD[6] ZL10353 0=disabled
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] IF 1=enabled
+ * DVB-T:
+ * IOD[5] TDA10023 0=disabled
+ * IOD[6] ZL10353 1=enabled
+ * IOE[0] IF 0=enabled
+ *
+ * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)"
+ * PCB: 508S2 (rev0.7)
+ * parts: DNBU10512IST(STV0903, STV6110), ISL6423
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] STV0903 1=enabled
+ *
+ * E7 T2C VID=1c73 PID=861f HW=20 FW=0.1 AMTCI=0.5 "anysee-E7T2C(LP)"
+ * PCB: 508T2C (rev0.3)
+ * parts: DNOQ44QCH106A(CXD2820R, TDA18212), TDA8024
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] CXD2820R 1=enabled
+ *
+ * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)"
+ * PCB: 508PTC (rev0.5)
+ * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[4] TDA18212 1=enabled
+ * DVB-C:
+ * IOD[6] ZL10353 0=disabled
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] IF 1=enabled
+ * DVB-T:
+ * IOD[5] TDA10023 0=disabled
+ * IOD[6] ZL10353 1=enabled
+ * IOE[0] IF 0=enabled
+ *
+ * E7 PS2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)"
+ * PCB: 508PS2 (rev0.4)
+ * parts: DNBU10512IST(STV0903, STV6110), ISL6423
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] STV0903 1=enabled
+ */
+
+
+/* external I2C gate used for DNOD44CDH086A(TDA18212) tuner module */
+static int anysee_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+
+	/* enable / disable tuner access on IOE[4] */
+	return anysee_wr_reg_mask(adap->dev, REG_IOE, (enable << 4), 0x10);
+}
+
+static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct anysee_state *state = adap->dev->priv;
+	int ret;
+
+	deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
+
+	/* no frontend sleep control */
+	if (onoff == 0)
+		return 0;
+
+	switch (state->hw) {
+	case ANYSEE_HW_507FA: /* 15 */
+		/* E30 Combo Plus */
+		/* E30 C Plus */
+
+		if ((fe->id ^ dvb_usb_anysee_delsys) == 0)  {
+			/* disable DVB-T demod on IOD[0] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
+				0x01);
+			if (ret)
+				goto error;
+
+			/* enable DVB-C demod on IOD[5] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+				0x20);
+			if (ret)
+				goto error;
+
+			/* enable DVB-C tuner on IOE[0] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
+				0x01);
+			if (ret)
+				goto error;
+		} else {
+			/* disable DVB-C demod on IOD[5] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+				0x20);
+			if (ret)
+				goto error;
+
+			/* enable DVB-T demod on IOD[0] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
+				0x01);
+			if (ret)
+				goto error;
+
+			/* enable DVB-T tuner on IOE[0] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
+				0x01);
+			if (ret)
+				goto error;
+		}
+
+		break;
+	case ANYSEE_HW_508TC: /* 18 */
+	case ANYSEE_HW_508PTC: /* 21 */
+		/* E7 TC */
+		/* E7 PTC */
+
+		if ((fe->id ^ dvb_usb_anysee_delsys) == 0)  {
+			/* disable DVB-T demod on IOD[6] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
+				0x40);
+			if (ret)
+				goto error;
+
+			/* enable DVB-C demod on IOD[5] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+				0x20);
+			if (ret)
+				goto error;
+
+			/* enable IF route on IOE[0] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
+				0x01);
+			if (ret)
+				goto error;
+		} else {
+			/* disable DVB-C demod on IOD[5] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+				0x20);
+			if (ret)
+				goto error;
+
+			/* enable DVB-T demod on IOD[6] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
+				0x40);
+			if (ret)
+				goto error;
+
+			/* enable IF route on IOE[0] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
+				0x01);
+			if (ret)
+				goto error;
+		}
+
+		break;
+	default:
+		ret = 0;
+	}
+
+error:
+	return ret;
+}
+
+static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	int ret;
+	struct anysee_state *state = adap->dev->priv;
+	u8 hw_info[3];
+	u8 tmp;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = anysee_tda18212_config.i2c_address,
+			.flags = 0,
+			.len = 1,
+			.buf = "\x00",
+		}, {
+			.addr = anysee_tda18212_config.i2c_address,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = &tmp,
+		}
+	};
+
+	/* detect hardware only once */
+	if (adap->fe_adap[0].fe == NULL) {
+		/* Check which hardware we have.
+		 * We must do this call two times to get reliable values
+		 * (hw/fw bug).
+		 */
+		ret = anysee_get_hw_info(adap->dev, hw_info);
+		if (ret)
+			goto error;
+
+		ret = anysee_get_hw_info(adap->dev, hw_info);
+		if (ret)
+			goto error;
+
+		/* Meaning of these info bytes are guessed. */
+		info("firmware version:%d.%d hardware id:%d",
+			hw_info[1], hw_info[2], hw_info[0]);
+
+		state->hw = hw_info[0];
+	}
+
+	/* set current frondend ID for devices having two frondends */
+	if (adap->fe_adap[0].fe)
+		state->fe_id++;
+
+	switch (state->hw) {
+	case ANYSEE_HW_507T: /* 2 */
+		/* E30 */
+
+		if (state->fe_id)
+			break;
+
+		/* attach demod */
+		adap->fe_adap[0].fe = dvb_attach(mt352_attach,
+			&anysee_mt352_config, &adap->dev->i2c_adap);
+		if (adap->fe_adap[0].fe)
+			break;
+
+		/* attach demod */
+		adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
+			&anysee_zl10353_config, &adap->dev->i2c_adap);
+
+		break;
+	case ANYSEE_HW_507CD: /* 6 */
+		/* E30 Plus */
+
+		if (state->fe_id)
+			break;
+
+		/* enable DVB-T demod on IOD[0] */
+		ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
+		if (ret)
+			goto error;
+
+		/* enable transport stream on IOA[7] */
+		ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (0 << 7), 0x80);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		adap->fe_adap[0].fe = dvb_attach(zl10353_attach,
+			&anysee_zl10353_config, &adap->dev->i2c_adap);
+
+		break;
+	case ANYSEE_HW_507DC: /* 10 */
+		/* E30 C Plus */
+
+		if (state->fe_id)
+			break;
+
+		/* enable DVB-C demod on IOD[0] */
+		ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		adap->fe_adap[0].fe = dvb_attach(tda10023_attach,
+			&anysee_tda10023_config, &adap->dev->i2c_adap, 0x48);
+
+		break;
+	case ANYSEE_HW_507SI: /* 11 */
+		/* E30 S2 Plus */
+
+		if (state->fe_id)
+			break;
+
+		/* enable DVB-S/S2 demod on IOD[0] */
+		ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		adap->fe_adap[0].fe = dvb_attach(cx24116_attach,
+			&anysee_cx24116_config, &adap->dev->i2c_adap);
+
+		break;
+	case ANYSEE_HW_507FA: /* 15 */
+		/* E30 Combo Plus */
+		/* E30 C Plus */
+
+		/* enable tuner on IOE[4] */
+		ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10);
+		if (ret)
+			goto error;
+
+		/* probe TDA18212 */
+		tmp = 0;
+		ret = i2c_transfer(&adap->dev->i2c_adap, msg, 2);
+		if (ret == 2 && tmp == 0xc7)
+			deb_info("%s: TDA18212 found\n", __func__);
+		else
+			tmp = 0;
+
+		/* disable tuner on IOE[4] */
+		ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 4), 0x10);
+		if (ret)
+			goto error;
+
+		if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0)  {
+			/* disable DVB-T demod on IOD[0] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
+				0x01);
+			if (ret)
+				goto error;
+
+			/* enable DVB-C demod on IOD[5] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+				0x20);
+			if (ret)
+				goto error;
+
+			/* attach demod */
+			if (tmp == 0xc7) {
+				/* TDA18212 config */
+				adap->fe_adap[state->fe_id].fe = dvb_attach(
+					tda10023_attach,
+					&anysee_tda10023_tda18212_config,
+					&adap->dev->i2c_adap, 0x48);
+			} else {
+				/* PLL config */
+				adap->fe_adap[state->fe_id].fe = dvb_attach(
+					tda10023_attach,
+					&anysee_tda10023_config,
+					&adap->dev->i2c_adap, 0x48);
+			}
+		} else {
+			/* disable DVB-C demod on IOD[5] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+				0x20);
+			if (ret)
+				goto error;
+
+			/* enable DVB-T demod on IOD[0] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
+				0x01);
+			if (ret)
+				goto error;
+
+			/* attach demod */
+			if (tmp == 0xc7) {
+				/* TDA18212 config */
+				adap->fe_adap[state->fe_id].fe = dvb_attach(
+					zl10353_attach,
+					&anysee_zl10353_tda18212_config2,
+					&adap->dev->i2c_adap);
+			} else {
+				/* PLL config */
+				adap->fe_adap[state->fe_id].fe = dvb_attach(
+					zl10353_attach,
+					&anysee_zl10353_config,
+					&adap->dev->i2c_adap);
+			}
+		}
+
+		/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+		if (tmp == 0xc7) {
+			if (adap->fe_adap[state->fe_id].fe)
+				adap->fe_adap[state->fe_id].fe->ops.i2c_gate_ctrl =
+					anysee_i2c_gate_ctrl;
+		}
+
+		break;
+	case ANYSEE_HW_508TC: /* 18 */
+	case ANYSEE_HW_508PTC: /* 21 */
+		/* E7 TC */
+		/* E7 PTC */
+
+		if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0)  {
+			/* disable DVB-T demod on IOD[6] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
+				0x40);
+			if (ret)
+				goto error;
+
+			/* enable DVB-C demod on IOD[5] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+				0x20);
+			if (ret)
+				goto error;
+
+			/* attach demod */
+			adap->fe_adap[state->fe_id].fe =
+				dvb_attach(tda10023_attach,
+				&anysee_tda10023_tda18212_config,
+				&adap->dev->i2c_adap, 0x48);
+		} else {
+			/* disable DVB-C demod on IOD[5] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+				0x20);
+			if (ret)
+				goto error;
+
+			/* enable DVB-T demod on IOD[6] */
+			ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
+				0x40);
+			if (ret)
+				goto error;
+
+			/* attach demod */
+			adap->fe_adap[state->fe_id].fe =
+				dvb_attach(zl10353_attach,
+				&anysee_zl10353_tda18212_config,
+				&adap->dev->i2c_adap);
+		}
+
+		/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+		if (adap->fe_adap[state->fe_id].fe)
+			adap->fe_adap[state->fe_id].fe->ops.i2c_gate_ctrl =
+				anysee_i2c_gate_ctrl;
+
+		state->has_ci = true;
+
+		break;
+	case ANYSEE_HW_508S2: /* 19 */
+	case ANYSEE_HW_508PS2: /* 22 */
+		/* E7 S2 */
+		/* E7 PS2 */
+
+		if (state->fe_id)
+			break;
+
+		/* enable DVB-S/S2 demod on IOE[5] */
+		ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		adap->fe_adap[0].fe = dvb_attach(stv0900_attach,
+			&anysee_stv0900_config, &adap->dev->i2c_adap, 0);
+
+		state->has_ci = true;
+
+		break;
+	case ANYSEE_HW_508T2C: /* 20 */
+		/* E7 T2C */
+
+		if (state->fe_id)
+			break;
+
+		/* enable DVB-T/T2/C demod on IOE[5] */
+		ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		adap->fe_adap[state->fe_id].fe = dvb_attach(cxd2820r_attach,
+				&anysee_cxd2820r_config, &adap->dev->i2c_adap);
+
+		state->has_ci = true;
+
+		break;
+	}
+
+	if (!adap->fe_adap[0].fe) {
+		/* we have no frontend :-( */
+		ret = -ENODEV;
+		err("Unsupported Anysee version. " \
+			"Please report the <linux-media@vger.kernel.org>.");
+	}
+error:
+	return ret;
+}
+
+static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct anysee_state *state = adap->dev->priv;
+	struct dvb_frontend *fe;
+	int ret;
+	deb_info("%s: fe=%d\n", __func__, state->fe_id);
+
+	switch (state->hw) {
+	case ANYSEE_HW_507T: /* 2 */
+		/* E30 */
+
+		/* attach tuner */
+		fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe,
+			(0xc2 >> 1), NULL, DVB_PLL_THOMSON_DTT7579);
+
+		break;
+	case ANYSEE_HW_507CD: /* 6 */
+		/* E30 Plus */
+
+		/* attach tuner */
+		fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe,
+			(0xc2 >> 1), &adap->dev->i2c_adap,
+			DVB_PLL_THOMSON_DTT7579);
+
+		break;
+	case ANYSEE_HW_507DC: /* 10 */
+		/* E30 C Plus */
+
+		/* attach tuner */
+		fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe,
+			(0xc0 >> 1), &adap->dev->i2c_adap,
+			DVB_PLL_SAMSUNG_DTOS403IH102A);
+
+		break;
+	case ANYSEE_HW_507SI: /* 11 */
+		/* E30 S2 Plus */
+
+		/* attach LNB controller */
+		fe = dvb_attach(isl6423_attach, adap->fe_adap[0].fe,
+			&adap->dev->i2c_adap, &anysee_isl6423_config);
+
+		break;
+	case ANYSEE_HW_507FA: /* 15 */
+		/* E30 Combo Plus */
+		/* E30 C Plus */
+
+		/* Try first attach TDA18212 silicon tuner on IOE[4], if that
+		 * fails attach old simple PLL. */
+
+		/* attach tuner */
+		fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
+			&adap->dev->i2c_adap, &anysee_tda18212_config);
+		if (fe)
+			break;
+
+		/* attach tuner */
+		fe = dvb_attach(dvb_pll_attach, adap->fe_adap[state->fe_id].fe,
+			(0xc0 >> 1), &adap->dev->i2c_adap,
+			DVB_PLL_SAMSUNG_DTOS403IH102A);
+
+		break;
+	case ANYSEE_HW_508TC: /* 18 */
+	case ANYSEE_HW_508PTC: /* 21 */
+		/* E7 TC */
+		/* E7 PTC */
+
+		/* attach tuner */
+		fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
+			&adap->dev->i2c_adap, &anysee_tda18212_config);
+
+		break;
+	case ANYSEE_HW_508S2: /* 19 */
+	case ANYSEE_HW_508PS2: /* 22 */
+		/* E7 S2 */
+		/* E7 PS2 */
+
+		/* attach tuner */
+		fe = dvb_attach(stv6110_attach, adap->fe_adap[0].fe,
+			&anysee_stv6110_config, &adap->dev->i2c_adap);
+
+		if (fe) {
+			/* attach LNB controller */
+			fe = dvb_attach(isl6423_attach, adap->fe_adap[0].fe,
+				&adap->dev->i2c_adap, &anysee_isl6423_config);
+		}
+
+		break;
+
+	case ANYSEE_HW_508T2C: /* 20 */
+		/* E7 T2C */
+
+		/* attach tuner */
+		fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe,
+			&adap->dev->i2c_adap, &anysee_tda18212_config2);
+
+		break;
+	default:
+		fe = NULL;
+	}
+
+	if (fe)
+		ret = 0;
+	else
+		ret = -ENODEV;
+
+	return ret;
+}
+
+static int anysee_rc_query(struct dvb_usb_device *d)
+{
+	u8 buf[] = {CMD_GET_IR_CODE};
+	u8 ircode[2];
+	int ret;
+
+	/* Remote controller is basic NEC using address byte 0x08.
+	   Anysee device RC query returns only two bytes, status and code,
+	   address byte is dropped. Also it does not return any value for
+	   NEC RCs having address byte other than 0x08. Due to that, we
+	   cannot use that device as standard NEC receiver.
+	   It could be possible make hack which reads whole code directly
+	   from device memory... */
+
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), ircode, sizeof(ircode));
+	if (ret)
+		return ret;
+
+	if (ircode[0]) {
+		deb_rc("%s: key pressed %02x\n", __func__, ircode[1]);
+		rc_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0);
+	}
+
+	return 0;
+}
+
+static int anysee_ci_read_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
+	int addr)
+{
+	struct dvb_usb_device *d = ci->data;
+	int ret;
+	u8 buf[] = {CMD_CI, 0x02, 0x40 | addr >> 8, addr & 0xff, 0x00, 1};
+	u8 val;
+
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1);
+	if (ret)
+		return ret;
+
+	return val;
+}
+
+static int anysee_ci_write_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
+	int addr, u8 val)
+{
+	struct dvb_usb_device *d = ci->data;
+	int ret;
+	u8 buf[] = {CMD_CI, 0x03, 0x40 | addr >> 8, addr & 0xff, 0x00, 1, val};
+
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int anysee_ci_read_cam_control(struct dvb_ca_en50221 *ci, int slot,
+	u8 addr)
+{
+	struct dvb_usb_device *d = ci->data;
+	int ret;
+	u8 buf[] = {CMD_CI, 0x04, 0x40, addr, 0x00, 1};
+	u8 val;
+
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1);
+	if (ret)
+		return ret;
+
+	return val;
+}
+
+static int anysee_ci_write_cam_control(struct dvb_ca_en50221 *ci, int slot,
+	u8 addr, u8 val)
+{
+	struct dvb_usb_device *d = ci->data;
+	int ret;
+	u8 buf[] = {CMD_CI, 0x05, 0x40, addr, 0x00, 1, val};
+
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int anysee_ci_slot_reset(struct dvb_ca_en50221 *ci, int slot)
+{
+	struct dvb_usb_device *d = ci->data;
+	int ret;
+	struct anysee_state *state = d->priv;
+
+	state->ci_cam_ready = jiffies + msecs_to_jiffies(1000);
+
+	ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
+	if (ret)
+		return ret;
+
+	msleep(300);
+
+	ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int anysee_ci_slot_shutdown(struct dvb_ca_en50221 *ci, int slot)
+{
+	struct dvb_usb_device *d = ci->data;
+	int ret;
+
+	ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
+	if (ret)
+		return ret;
+
+	msleep(30);
+
+	ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int anysee_ci_slot_ts_enable(struct dvb_ca_en50221 *ci, int slot)
+{
+	struct dvb_usb_device *d = ci->data;
+	int ret;
+
+	ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 1), 0x02);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int anysee_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot,
+	int open)
+{
+	struct dvb_usb_device *d = ci->data;
+	struct anysee_state *state = d->priv;
+	int ret;
+	u8 tmp;
+
+	ret = anysee_rd_reg_mask(d, REG_IOC, &tmp, 0x40);
+	if (ret)
+		return ret;
+
+	if (tmp == 0) {
+		ret = DVB_CA_EN50221_POLL_CAM_PRESENT;
+		if (time_after(jiffies, state->ci_cam_ready))
+			ret |= DVB_CA_EN50221_POLL_CAM_READY;
+	}
+
+	return ret;
+}
+
+static int anysee_ci_init(struct dvb_usb_device *d)
+{
+	struct anysee_state *state = d->priv;
+	int ret;
+
+	state->ci.owner               = THIS_MODULE;
+	state->ci.read_attribute_mem  = anysee_ci_read_attribute_mem;
+	state->ci.write_attribute_mem = anysee_ci_write_attribute_mem;
+	state->ci.read_cam_control    = anysee_ci_read_cam_control;
+	state->ci.write_cam_control   = anysee_ci_write_cam_control;
+	state->ci.slot_reset          = anysee_ci_slot_reset;
+	state->ci.slot_shutdown       = anysee_ci_slot_shutdown;
+	state->ci.slot_ts_enable      = anysee_ci_slot_ts_enable;
+	state->ci.poll_slot_status    = anysee_ci_poll_slot_status;
+	state->ci.data                = d;
+
+	ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
+	if (ret)
+		return ret;
+
+	ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 2)|(0 << 1)|(0 << 0), 0x07);
+	if (ret)
+		return ret;
+
+	ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 2)|(1 << 1)|(1 << 0), 0x07);
+	if (ret)
+		return ret;
+
+	ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void anysee_ci_release(struct dvb_usb_device *d)
+{
+	struct anysee_state *state = d->priv;
+
+	/* detach CI */
+	if (state->has_ci)
+		dvb_ca_en50221_release(&state->ci);
+
+	return;
+}
+
+static int anysee_init(struct dvb_usb_device *d)
+{
+	struct anysee_state *state = d->priv;
+	int ret;
+
+	/* LED light */
+	ret = anysee_led_ctrl(d, 0x01, 0x03);
+	if (ret)
+		return ret;
+
+	/* enable IR */
+	ret = anysee_ir_ctrl(d, 1);
+	if (ret)
+		return ret;
+
+	/* attach CI */
+	if (state->has_ci) {
+		ret = anysee_ci_init(d);
+		if (ret) {
+			state->has_ci = false;
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties anysee_properties;
+
+static int anysee_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct dvb_usb_device *d;
+	struct usb_host_interface *alt;
+	int ret;
+
+	/* There is one interface with two alternate settings.
+	   Alternate setting 0 is for bulk transfer.
+	   Alternate setting 1 is for isochronous transfer.
+	   We use bulk transfer (alternate setting 0). */
+	if (intf->num_altsetting < 1)
+		return -ENODEV;
+
+	/*
+	 * Anysee is always warm (its USB-bridge, Cypress FX2, uploads
+	 * firmware from eeprom).  If dvb_usb_device_init() succeeds that
+	 * means d is a valid pointer.
+	 */
+	ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d,
+		adapter_nr);
+	if (ret)
+		return ret;
+
+	alt = usb_altnum_to_altsetting(intf, 0);
+	if (alt == NULL) {
+		deb_info("%s: no alt found!\n", __func__);
+		return -ENODEV;
+	}
+
+	ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
+		alt->desc.bAlternateSetting);
+	if (ret)
+		return ret;
+
+	return anysee_init(d);
+}
+
+static void anysee_disconnect(struct usb_interface *intf)
+{
+	struct dvb_usb_device *d = usb_get_intfdata(intf);
+
+	anysee_ci_release(d);
+	dvb_usb_device_exit(intf);
+
+	return;
+}
+
+static struct usb_device_id anysee_table[] = {
+	{ USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) },
+	{ USB_DEVICE(USB_VID_AMT,     USB_PID_ANYSEE) },
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, anysee_table);
+
+static struct dvb_usb_device_properties anysee_properties = {
+	.caps             = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl         = DEVICE_SPECIFIC,
+
+	.size_of_priv     = sizeof(struct anysee_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+		.num_frontends    = 2,
+		.frontend_ctrl    = anysee_frontend_ctrl,
+		.fe = { {
+			.streaming_ctrl   = anysee_streaming_ctrl,
+			.frontend_attach  = anysee_frontend_attach,
+			.tuner_attach     = anysee_tuner_attach,
+			.stream = {
+				.type = USB_BULK,
+				.count = 8,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = (16*512),
+					}
+				}
+			},
+		}, {
+			.streaming_ctrl   = anysee_streaming_ctrl,
+			.frontend_attach  = anysee_frontend_attach,
+			.tuner_attach     = anysee_tuner_attach,
+			.stream = {
+				.type = USB_BULK,
+				.count = 8,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = (16*512),
+					}
+				}
+			},
+		} },
+		}
+	},
+
+	.rc.core = {
+		.rc_codes         = RC_MAP_ANYSEE,
+		.protocol         = RC_TYPE_OTHER,
+		.module_name      = "anysee",
+		.rc_query         = anysee_rc_query,
+		.rc_interval      = 250,  /* windows driver uses 500ms */
+	},
+
+	.i2c_algo         = &anysee_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 1,
+
+	.num_device_descs = 1,
+	.devices = {
+		{
+			.name = "Anysee DVB USB2.0",
+			.cold_ids = {NULL},
+			.warm_ids = {&anysee_table[0],
+				     &anysee_table[1], NULL},
+		},
+	}
+};
+
+static struct usb_driver anysee_driver = {
+	.name       = "dvb_usb_anysee",
+	.probe      = anysee_probe,
+	.disconnect = anysee_disconnect,
+	.id_table   = anysee_table,
+};
+
+module_usb_driver(anysee_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0");
+MODULE_LICENSE("GPL");