Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 897 insertions, 0 deletions

diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
new file mode 100644
index 00000000..410a723b
--- /dev/null
+++ b/drivers/leds/leds-lp5521.c
@@ -0,0 +1,897 @@
+/*
+ * LP5521 LED chip driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/leds-lp5521.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#define LP5521_PROGRAM_LENGTH		32	/* in bytes */
+
+#define LP5521_MAX_LEDS			3	/* Maximum number of LEDs */
+#define LP5521_MAX_ENGINES		3	/* Maximum number of engines */
+
+#define LP5521_ENG_MASK_BASE		0x30	/* 00110000 */
+#define LP5521_ENG_STATUS_MASK		0x07	/* 00000111 */
+
+#define LP5521_CMD_LOAD			0x15	/* 00010101 */
+#define LP5521_CMD_RUN			0x2a	/* 00101010 */
+#define LP5521_CMD_DIRECT		0x3f	/* 00111111 */
+#define LP5521_CMD_DISABLED		0x00	/* 00000000 */
+
+/* Registers */
+#define LP5521_REG_ENABLE		0x00
+#define LP5521_REG_OP_MODE		0x01
+#define LP5521_REG_R_PWM		0x02
+#define LP5521_REG_G_PWM		0x03
+#define LP5521_REG_B_PWM		0x04
+#define LP5521_REG_R_CURRENT		0x05
+#define LP5521_REG_G_CURRENT		0x06
+#define LP5521_REG_B_CURRENT		0x07
+#define LP5521_REG_CONFIG		0x08
+#define LP5521_REG_R_CHANNEL_PC		0x09
+#define LP5521_REG_G_CHANNEL_PC		0x0A
+#define LP5521_REG_B_CHANNEL_PC		0x0B
+#define LP5521_REG_STATUS		0x0C
+#define LP5521_REG_RESET		0x0D
+#define LP5521_REG_GPO			0x0E
+#define LP5521_REG_R_PROG_MEM		0x10
+#define LP5521_REG_G_PROG_MEM		0x30
+#define LP5521_REG_B_PROG_MEM		0x50
+
+#define LP5521_PROG_MEM_BASE		LP5521_REG_R_PROG_MEM
+#define LP5521_PROG_MEM_SIZE		0x20
+
+/* Base register to set LED current */
+#define LP5521_REG_LED_CURRENT_BASE	LP5521_REG_R_CURRENT
+
+/* Base register to set the brightness */
+#define LP5521_REG_LED_PWM_BASE		LP5521_REG_R_PWM
+
+/* Bits in ENABLE register */
+#define LP5521_MASTER_ENABLE		0x40	/* Chip master enable */
+#define LP5521_LOGARITHMIC_PWM		0x80	/* Logarithmic PWM adjustment */
+#define LP5521_EXEC_RUN			0x2A
+#define LP5521_ENABLE_DEFAULT	\
+	(LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM)
+#define LP5521_ENABLE_RUN_PROGRAM	\
+	(LP5521_ENABLE_DEFAULT | LP5521_EXEC_RUN)
+
+/* Status */
+#define LP5521_EXT_CLK_USED		0x08
+
+/* default R channel current register value */
+#define LP5521_REG_R_CURR_DEFAULT	0xAF
+
+/* Pattern Mode */
+#define PATTERN_OFF	0
+
+struct lp5521_engine {
+	int		id;
+	u8		mode;
+	u8		prog_page;
+	u8		engine_mask;
+};
+
+struct lp5521_led {
+	int			id;
+	u8			chan_nr;
+	u8			led_current;
+	u8			max_current;
+	struct led_classdev	cdev;
+	struct work_struct	brightness_work;
+	u8			brightness;
+};
+
+struct lp5521_chip {
+	struct lp5521_platform_data *pdata;
+	struct mutex		lock; /* Serialize control */
+	struct i2c_client	*client;
+	struct lp5521_engine	engines[LP5521_MAX_ENGINES];
+	struct lp5521_led	leds[LP5521_MAX_LEDS];
+	u8			num_channels;
+	u8			num_leds;
+};
+
+static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev)
+{
+	return container_of(cdev, struct lp5521_led, cdev);
+}
+
+static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine)
+{
+	return container_of(engine, struct lp5521_chip,
+			    engines[engine->id - 1]);
+}
+
+static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led)
+{
+	return container_of(led, struct lp5521_chip,
+			    leds[led->id]);
+}
+
+static void lp5521_led_brightness_work(struct work_struct *work);
+
+static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf)
+{
+	s32 ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0)
+		return -EIO;
+
+	*buf = ret;
+	return 0;
+}
+
+static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode)
+{
+	struct lp5521_chip *chip = engine_to_lp5521(engine);
+	struct i2c_client *client = chip->client;
+	int ret;
+	u8 engine_state;
+
+	/* Only transition between RUN and DIRECT mode are handled here */
+	if (mode == LP5521_CMD_LOAD)
+		return 0;
+
+	if (mode == LP5521_CMD_DISABLED)
+		mode = LP5521_CMD_DIRECT;
+
+	ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state);
+	if (ret < 0)
+		return ret;
+
+	/* set mode only for this engine */
+	engine_state &= ~(engine->engine_mask);
+	mode &= engine->engine_mask;
+	engine_state |= mode;
+	return lp5521_write(client, LP5521_REG_OP_MODE, engine_state);
+}
+
+static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
+{
+	struct lp5521_chip *chip = engine_to_lp5521(eng);
+	struct i2c_client *client = chip->client;
+	int ret;
+	int addr;
+	u8 mode;
+
+	/* move current engine to direct mode and remember the state */
+	ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT);
+	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
+	usleep_range(1000, 2000);
+	ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode);
+
+	/* For loading, all the engines to load mode */
+	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
+	usleep_range(1000, 2000);
+	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
+	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
+	usleep_range(1000, 2000);
+
+	addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE;
+	i2c_smbus_write_i2c_block_data(client,
+				addr,
+				LP5521_PROG_MEM_SIZE,
+				pattern);
+
+	ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode);
+	return ret;
+}
+
+static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr)
+{
+	return lp5521_write(chip->client,
+		    LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
+		    curr);
+}
+
+static void lp5521_init_engine(struct lp5521_chip *chip)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+		chip->engines[i].id = i + 1;
+		chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2);
+		chip->engines[i].prog_page = i;
+	}
+}
+
+static int lp5521_configure(struct i2c_client *client)
+{
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	int ret;
+	u8 cfg;
+
+	lp5521_init_engine(chip);
+
+	/* Set all PWMs to direct control mode */
+	ret = lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+
+	cfg = chip->pdata->update_config ?
+		: (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
+	ret |= lp5521_write(client, LP5521_REG_CONFIG, cfg);
+
+	/* Initialize all channels PWM to zero -> leds off */
+	ret |= lp5521_write(client, LP5521_REG_R_PWM, 0);
+	ret |= lp5521_write(client, LP5521_REG_G_PWM, 0);
+	ret |= lp5521_write(client, LP5521_REG_B_PWM, 0);
+
+	/* Set engines are set to run state when OP_MODE enables engines */
+	ret |= lp5521_write(client, LP5521_REG_ENABLE,
+			LP5521_ENABLE_RUN_PROGRAM);
+	/* enable takes 500us. 1 - 2 ms leaves some margin */
+	usleep_range(1000, 2000);
+
+	return ret;
+}
+
+static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf)
+{
+	int ret;
+	u8 status;
+
+	ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	/* Check that ext clock is really in use if requested */
+	if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT)
+		if  ((status & LP5521_EXT_CLK_USED) == 0)
+			return -EIO;
+	return 0;
+}
+
+static void lp5521_set_brightness(struct led_classdev *cdev,
+			     enum led_brightness brightness)
+{
+	struct lp5521_led *led = cdev_to_led(cdev);
+	led->brightness = (u8)brightness;
+	schedule_work(&led->brightness_work);
+}
+
+static void lp5521_led_brightness_work(struct work_struct *work)
+{
+	struct lp5521_led *led = container_of(work,
+					      struct lp5521_led,
+					      brightness_work);
+	struct lp5521_chip *chip = led_to_lp5521(led);
+	struct i2c_client *client = chip->client;
+
+	mutex_lock(&chip->lock);
+	lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr,
+		led->brightness);
+	mutex_unlock(&chip->lock);
+}
+
+/* Detect the chip by setting its ENABLE register and reading it back. */
+static int lp5521_detect(struct i2c_client *client)
+{
+	int ret;
+	u8 buf;
+
+	ret = lp5521_write(client, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT);
+	if (ret)
+		return ret;
+	/* enable takes 500us. 1 - 2 ms leaves some margin */
+	usleep_range(1000, 2000);
+	ret = lp5521_read(client, LP5521_REG_ENABLE, &buf);
+	if (ret)
+		return ret;
+	if (buf != LP5521_ENABLE_DEFAULT)
+		return -ENODEV;
+
+	return 0;
+}
+
+/* Set engine mode and create appropriate sysfs attributes, if required. */
+static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode)
+{
+	int ret = 0;
+
+	/* if in that mode already do nothing, except for run */
+	if (mode == engine->mode && mode != LP5521_CMD_RUN)
+		return 0;
+
+	if (mode == LP5521_CMD_RUN) {
+		ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN);
+	} else if (mode == LP5521_CMD_LOAD) {
+		lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED);
+		lp5521_set_engine_mode(engine, LP5521_CMD_LOAD);
+	} else if (mode == LP5521_CMD_DISABLED) {
+		lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED);
+	}
+
+	engine->mode = mode;
+
+	return ret;
+}
+
+static int lp5521_do_store_load(struct lp5521_engine *engine,
+				const char *buf, size_t len)
+{
+	struct lp5521_chip *chip = engine_to_lp5521(engine);
+	struct i2c_client *client = chip->client;
+	int  ret, nrchars, offset = 0, i = 0;
+	char c[3];
+	unsigned cmd;
+	u8 pattern[LP5521_PROGRAM_LENGTH] = {0};
+
+	while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) {
+		/* separate sscanfs because length is working only for %s */
+		ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
+		if (ret != 2)
+			goto fail;
+		ret = sscanf(c, "%2x", &cmd);
+		if (ret != 1)
+			goto fail;
+		pattern[i] = (u8)cmd;
+
+		offset += nrchars;
+		i++;
+	}
+
+	/* Each instruction is 16bit long. Check that length is even */
+	if (i % 2)
+		goto fail;
+
+	mutex_lock(&chip->lock);
+	if (engine->mode == LP5521_CMD_LOAD)
+		ret = lp5521_load_program(engine, pattern);
+	else
+		ret = -EINVAL;
+	mutex_unlock(&chip->lock);
+
+	if (ret) {
+		dev_err(&client->dev, "failed loading pattern\n");
+		return ret;
+	}
+
+	return len;
+fail:
+	dev_err(&client->dev, "wrong pattern format\n");
+	return -EINVAL;
+}
+
+static ssize_t store_engine_load(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	return lp5521_do_store_load(&chip->engines[nr - 1], buf, len);
+}
+
+#define store_load(nr)							\
+static ssize_t store_engine##nr##_load(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t len)	\
+{									\
+	return store_engine_load(dev, attr, buf, len, nr);		\
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t show_engine_mode(struct device *dev,
+				struct device_attribute *attr,
+				char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	switch (chip->engines[nr - 1].mode) {
+	case LP5521_CMD_RUN:
+		return sprintf(buf, "run\n");
+	case LP5521_CMD_LOAD:
+		return sprintf(buf, "load\n");
+	case LP5521_CMD_DISABLED:
+		return sprintf(buf, "disabled\n");
+	default:
+		return sprintf(buf, "disabled\n");
+	}
+}
+
+#define show_mode(nr)							\
+static ssize_t show_engine##nr##_mode(struct device *dev,		\
+				    struct device_attribute *attr,	\
+				    char *buf)				\
+{									\
+	return show_engine_mode(dev, attr, buf, nr);			\
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	struct lp5521_engine *engine = &chip->engines[nr - 1];
+	mutex_lock(&chip->lock);
+
+	if (!strncmp(buf, "run", 3))
+		lp5521_set_mode(engine, LP5521_CMD_RUN);
+	else if (!strncmp(buf, "load", 4))
+		lp5521_set_mode(engine, LP5521_CMD_LOAD);
+	else if (!strncmp(buf, "disabled", 8))
+		lp5521_set_mode(engine, LP5521_CMD_DISABLED);
+
+	mutex_unlock(&chip->lock);
+	return len;
+}
+
+#define store_mode(nr)							\
+static ssize_t store_engine##nr##_mode(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t len)	\
+{									\
+	return store_engine_mode(dev, attr, buf, len, nr);		\
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static ssize_t show_max_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5521_led *led = cdev_to_led(led_cdev);
+
+	return sprintf(buf, "%d\n", led->max_current);
+}
+
+static ssize_t show_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5521_led *led = cdev_to_led(led_cdev);
+
+	return sprintf(buf, "%d\n", led->led_current);
+}
+
+static ssize_t store_current(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t len)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5521_led *led = cdev_to_led(led_cdev);
+	struct lp5521_chip *chip = led_to_lp5521(led);
+	ssize_t ret;
+	unsigned long curr;
+
+	if (kstrtoul(buf, 0, &curr))
+		return -EINVAL;
+
+	if (curr > led->max_current)
+		return -EINVAL;
+
+	mutex_lock(&chip->lock);
+	ret = lp5521_set_led_current(chip, led->id, curr);
+	mutex_unlock(&chip->lock);
+
+	if (ret < 0)
+		return ret;
+
+	led->led_current = (u8)curr;
+
+	return len;
+}
+
+static ssize_t lp5521_selftest(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = lp5521_run_selftest(chip, buf);
+	mutex_unlock(&chip->lock);
+	return sprintf(buf, "%s\n", ret ? "FAIL" : "OK");
+}
+
+static void lp5521_clear_program_memory(struct i2c_client *cl)
+{
+	int i;
+	u8 rgb_mem[] = {
+		LP5521_REG_R_PROG_MEM,
+		LP5521_REG_G_PROG_MEM,
+		LP5521_REG_B_PROG_MEM,
+	};
+
+	for (i = 0; i < ARRAY_SIZE(rgb_mem); i++) {
+		lp5521_write(cl, rgb_mem[i], 0);
+		lp5521_write(cl, rgb_mem[i] + 1, 0);
+	}
+}
+
+static void lp5521_write_program_memory(struct i2c_client *cl,
+				u8 base, u8 *rgb, int size)
+{
+	int i;
+
+	if (!rgb || size <= 0)
+		return;
+
+	for (i = 0; i < size; i++)
+		lp5521_write(cl, base + i, *(rgb + i));
+
+	lp5521_write(cl, base + i, 0);
+	lp5521_write(cl, base + i + 1, 0);
+}
+
+static inline struct lp5521_led_pattern *lp5521_get_pattern
+					(struct lp5521_chip *chip, u8 offset)
+{
+	struct lp5521_led_pattern *ptn;
+	ptn = chip->pdata->patterns + (offset - 1);
+	return ptn;
+}
+
+static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip)
+{
+	struct lp5521_led_pattern *ptn;
+	struct i2c_client *cl = chip->client;
+	int num_patterns = chip->pdata->num_patterns;
+
+	if (mode > num_patterns || !(chip->pdata->patterns))
+		return;
+
+	if (mode == PATTERN_OFF) {
+		lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT);
+		usleep_range(1000, 2000);
+		lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+	} else {
+		ptn = lp5521_get_pattern(chip, mode);
+		if (!ptn)
+			return;
+
+		lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
+		usleep_range(1000, 2000);
+
+		lp5521_clear_program_memory(cl);
+
+		lp5521_write_program_memory(cl, LP5521_REG_R_PROG_MEM,
+					ptn->r, ptn->size_r);
+		lp5521_write_program_memory(cl, LP5521_REG_G_PROG_MEM,
+					ptn->g, ptn->size_g);
+		lp5521_write_program_memory(cl, LP5521_REG_B_PROG_MEM,
+					ptn->b, ptn->size_b);
+
+		lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_RUN);
+		usleep_range(1000, 2000);
+		lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM);
+	}
+}
+
+static ssize_t store_led_pattern(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t len)
+{
+	struct lp5521_chip *chip = i2c_get_clientdata(to_i2c_client(dev));
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 16, &val);
+	if (ret)
+		return ret;
+
+	lp5521_run_led_pattern(val, chip);
+
+	return len;
+}
+
+/* led class device attributes */
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
+
+static struct attribute *lp5521_led_attributes[] = {
+	&dev_attr_led_current.attr,
+	&dev_attr_max_current.attr,
+	NULL,
+};
+
+static struct attribute_group lp5521_led_attribute_group = {
+	.attrs = lp5521_led_attributes
+};
+
+/* device attributes */
+static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUSR,
+		   show_engine1_mode, store_engine1_mode);
+static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUSR,
+		   show_engine2_mode, store_engine2_mode);
+static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUSR,
+		   show_engine3_mode, store_engine3_mode);
+static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load);
+static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load);
+static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load);
+static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL);
+static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, store_led_pattern);
+
+static struct attribute *lp5521_attributes[] = {
+	&dev_attr_engine1_mode.attr,
+	&dev_attr_engine2_mode.attr,
+	&dev_attr_engine3_mode.attr,
+	&dev_attr_selftest.attr,
+	&dev_attr_engine1_load.attr,
+	&dev_attr_engine2_load.attr,
+	&dev_attr_engine3_load.attr,
+	&dev_attr_led_pattern.attr,
+	NULL
+};
+
+static const struct attribute_group lp5521_group = {
+	.attrs = lp5521_attributes,
+};
+
+static int lp5521_register_sysfs(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	return sysfs_create_group(&dev->kobj, &lp5521_group);
+}
+
+static void lp5521_unregister_sysfs(struct i2c_client *client)
+{
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	struct device *dev = &client->dev;
+	int i;
+
+	sysfs_remove_group(&dev->kobj, &lp5521_group);
+
+	for (i = 0; i < chip->num_leds; i++)
+		sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
+				&lp5521_led_attribute_group);
+}
+
+static int __devinit lp5521_init_led(struct lp5521_led *led,
+				struct i2c_client *client,
+				int chan, struct lp5521_platform_data *pdata)
+{
+	struct device *dev = &client->dev;
+	char name[32];
+	int res;
+
+	if (chan >= LP5521_MAX_LEDS)
+		return -EINVAL;
+
+	if (pdata->led_config[chan].led_current == 0)
+		return 0;
+
+	led->led_current = pdata->led_config[chan].led_current;
+	led->max_current = pdata->led_config[chan].max_current;
+	led->chan_nr = pdata->led_config[chan].chan_nr;
+
+	if (led->chan_nr >= LP5521_MAX_LEDS) {
+		dev_err(dev, "Use channel numbers between 0 and %d\n",
+			LP5521_MAX_LEDS - 1);
+		return -EINVAL;
+	}
+
+	led->cdev.brightness_set = lp5521_set_brightness;
+	if (pdata->led_config[chan].name) {
+		led->cdev.name = pdata->led_config[chan].name;
+	} else {
+		snprintf(name, sizeof(name), "%s:channel%d",
+			pdata->label ?: client->name, chan);
+		led->cdev.name = name;
+	}
+
+	res = led_classdev_register(dev, &led->cdev);
+	if (res < 0) {
+		dev_err(dev, "couldn't register led on channel %d\n", chan);
+		return res;
+	}
+
+	res = sysfs_create_group(&led->cdev.dev->kobj,
+			&lp5521_led_attribute_group);
+	if (res < 0) {
+		dev_err(dev, "couldn't register current attribute\n");
+		led_classdev_unregister(&led->cdev);
+		return res;
+	}
+	return 0;
+}
+
+static int __devinit lp5521_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct lp5521_chip		*chip;
+	struct lp5521_platform_data	*pdata;
+	int ret, i, led;
+	u8 buf;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, chip);
+	chip->client = client;
+
+	pdata = client->dev.platform_data;
+
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data\n");
+		ret = -EINVAL;
+		goto fail1;
+	}
+
+	mutex_init(&chip->lock);
+
+	chip->pdata   = pdata;
+
+	if (pdata->setup_resources) {
+		ret = pdata->setup_resources();
+		if (ret < 0)
+			goto fail1;
+	}
+
+	if (pdata->enable) {
+		pdata->enable(0);
+		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
+		pdata->enable(1);
+		usleep_range(1000, 2000); /* 500us abs min. */
+	}
+
+	lp5521_write(client, LP5521_REG_RESET, 0xff);
+	usleep_range(10000, 20000); /*
+				     * Exact value is not available. 10 - 20ms
+				     * appears to be enough for reset.
+				     */
+
+	/*
+	 * Make sure that the chip is reset by reading back the r channel
+	 * current reg. This is dummy read is required on some platforms -
+	 * otherwise further access to the R G B channels in the
+	 * LP5521_REG_ENABLE register will not have any effect - strange!
+	 */
+	ret = lp5521_read(client, LP5521_REG_R_CURRENT, &buf);
+	if (buf != LP5521_REG_R_CURR_DEFAULT) {
+		dev_err(&client->dev, "error in resetting chip\n");
+		goto fail2;
+	}
+	usleep_range(10000, 20000);
+
+	ret = lp5521_detect(client);
+
+	if (ret) {
+		dev_err(&client->dev, "Chip not found\n");
+		goto fail2;
+	}
+
+	dev_info(&client->dev, "%s programmable led chip found\n", id->name);
+
+	ret = lp5521_configure(client);
+	if (ret < 0) {
+		dev_err(&client->dev, "error configuring chip\n");
+		goto fail2;
+	}
+
+	/* Initialize leds */
+	chip->num_channels = pdata->num_channels;
+	chip->num_leds = 0;
+	led = 0;
+	for (i = 0; i < pdata->num_channels; i++) {
+		/* Do not initialize channels that are not connected */
+		if (pdata->led_config[i].led_current == 0)
+			continue;
+
+		ret = lp5521_init_led(&chip->leds[led], client, i, pdata);
+		if (ret) {
+			dev_err(&client->dev, "error initializing leds\n");
+			goto fail3;
+		}
+		chip->num_leds++;
+
+		chip->leds[led].id = led;
+		/* Set initial LED current */
+		lp5521_set_led_current(chip, led,
+				chip->leds[led].led_current);
+
+		INIT_WORK(&(chip->leds[led].brightness_work),
+			lp5521_led_brightness_work);
+
+		led++;
+	}
+
+	ret = lp5521_register_sysfs(client);
+	if (ret) {
+		dev_err(&client->dev, "registering sysfs failed\n");
+		goto fail3;
+	}
+	return ret;
+fail3:
+	for (i = 0; i < chip->num_leds; i++) {
+		led_classdev_unregister(&chip->leds[i].cdev);
+		cancel_work_sync(&chip->leds[i].brightness_work);
+	}
+fail2:
+	if (pdata->enable)
+		pdata->enable(0);
+	if (pdata->release_resources)
+		pdata->release_resources();
+fail1:
+	kfree(chip);
+	return ret;
+}
+
+static int __devexit lp5521_remove(struct i2c_client *client)
+{
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	int i;
+
+	lp5521_run_led_pattern(PATTERN_OFF, chip);
+	lp5521_unregister_sysfs(client);
+
+	for (i = 0; i < chip->num_leds; i++) {
+		led_classdev_unregister(&chip->leds[i].cdev);
+		cancel_work_sync(&chip->leds[i].brightness_work);
+	}
+
+	if (chip->pdata->enable)
+		chip->pdata->enable(0);
+	if (chip->pdata->release_resources)
+		chip->pdata->release_resources();
+	kfree(chip);
+	return 0;
+}
+
+static const struct i2c_device_id lp5521_id[] = {
+	{ "lp5521", 0 }, /* Three channel chip */
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lp5521_id);
+
+static struct i2c_driver lp5521_driver = {
+	.driver = {
+		.name	= "lp5521",
+	},
+	.probe		= lp5521_probe,
+	.remove		= __devexit_p(lp5521_remove),
+	.id_table	= lp5521_id,
+};
+
+module_i2c_driver(lp5521_driver);
+
+MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo");
+MODULE_DESCRIPTION("LP5521 LED engine");
+MODULE_LICENSE("GPL v2");