Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 954 insertions, 0 deletions

diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
new file mode 100644
index 00000000..049da67f
--- /dev/null
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -0,0 +1,954 @@
+/*
+ * USB driver for Gigaset 307x directly or using M105 Data.
+ *
+ * Copyright (c) 2001 by Stefan Eilers
+ *                   and Hansjoerg Lipp <hjlipp@web.de>.
+ *
+ * This driver was derived from the USB skeleton driver by
+ * Greg Kroah-Hartman <greg@kroah.com>
+ *
+ * =====================================================================
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation; either version 2 of
+ *	the License, or (at your option) any later version.
+ * =====================================================================
+ */
+
+#include "gigaset.h"
+#include <linux/usb.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+/* Version Information */
+#define DRIVER_AUTHOR "Hansjoerg Lipp <hjlipp@web.de>, Stefan Eilers"
+#define DRIVER_DESC "USB Driver for Gigaset 307x using M105"
+
+/* Module parameters */
+
+static int startmode = SM_ISDN;
+static int cidmode = 1;
+
+module_param(startmode, int, S_IRUGO);
+module_param(cidmode, int, S_IRUGO);
+MODULE_PARM_DESC(startmode, "start in isdn4linux mode");
+MODULE_PARM_DESC(cidmode, "Call-ID mode");
+
+#define GIGASET_MINORS     1
+#define GIGASET_MINOR      8
+#define GIGASET_MODULENAME "usb_gigaset"
+#define GIGASET_DEVNAME    "ttyGU"
+
+/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
+#define IF_WRITEBUF 264
+
+/* Values for the Gigaset M105 Data */
+#define USB_M105_VENDOR_ID	0x0681
+#define USB_M105_PRODUCT_ID	0x0009
+
+/* table of devices that work with this driver */
+static const struct usb_device_id gigaset_table[] = {
+	{ USB_DEVICE(USB_M105_VENDOR_ID, USB_M105_PRODUCT_ID) },
+	{ }					/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, gigaset_table);
+
+/*
+ * Control requests (empty fields: 00)
+ *
+ *       RT|RQ|VALUE|INDEX|LEN  |DATA
+ * In:
+ *       C1 08             01
+ *            Get flags (1 byte). Bits: 0=dtr,1=rts,3-7:?
+ *       C1 0F             ll ll
+ *            Get device information/status (llll: 0x200 and 0x40 seen).
+ *            Real size: I only saw MIN(llll,0x64).
+ *            Contents: seems to be always the same...
+ *              offset 0x00: Length of this structure (0x64) (len: 1,2,3 bytes)
+ *              offset 0x3c: String (16 bit chars): "MCCI USB Serial V2.0"
+ *              rest:        ?
+ * Out:
+ *       41 11
+ *            Initialize/reset device ?
+ *       41 00 xx 00
+ *            ? (xx=00 or 01; 01 on start, 00 on close)
+ *       41 07 vv mm
+ *            Set/clear flags vv=value, mm=mask (see RQ 08)
+ *       41 12 xx
+ *            Used before the following configuration requests are issued
+ *            (with xx=0x0f). I've seen other values<0xf, though.
+ *       41 01 xx xx
+ *            Set baud rate. xxxx=ceil(0x384000/rate)=trunc(0x383fff/rate)+1.
+ *       41 03 ps bb
+ *            Set byte size and parity. p:  0x20=even,0x10=odd,0x00=no parity
+ *                                     [    0x30: m, 0x40: s           ]
+ *                                     [s:  0: 1 stop bit; 1: 1.5; 2: 2]
+ *                                      bb: bits/byte (seen 7 and 8)
+ *       41 13 -- -- -- -- 10 00 ww 00 00 00 xx 00 00 00 yy 00 00 00 zz 00 00 00
+ *            ??
+ *            Initialization: 01, 40, 00, 00
+ *            Open device:    00  40, 00, 00
+ *            yy and zz seem to be equal, either 0x00 or 0x0a
+ *            (ww,xx) pairs seen: (00,00), (00,40), (01,40), (09,80), (19,80)
+ *       41 19 -- -- -- -- 06 00 00 00 00 xx 11 13
+ *            Used after every "configuration sequence" (RQ 12, RQs 01/03/13).
+ *            xx is usually 0x00 but was 0x7e before starting data transfer
+ *            in unimodem mode. So, this might be an array of characters that
+ *            need special treatment ("commit all bufferd data"?), 11=^Q, 13=^S.
+ *
+ * Unimodem mode: use "modprobe ppp_async flag_time=0" as the device _needs_ two
+ * flags per packet.
+ */
+
+/* functions called if a device of this driver is connected/disconnected */
+static int gigaset_probe(struct usb_interface *interface,
+			 const struct usb_device_id *id);
+static void gigaset_disconnect(struct usb_interface *interface);
+
+/* functions called before/after suspend */
+static int gigaset_suspend(struct usb_interface *intf, pm_message_t message);
+static int gigaset_resume(struct usb_interface *intf);
+static int gigaset_pre_reset(struct usb_interface *intf);
+
+static struct gigaset_driver *driver;
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver gigaset_usb_driver = {
+	.name =		GIGASET_MODULENAME,
+	.probe =	gigaset_probe,
+	.disconnect =	gigaset_disconnect,
+	.id_table =	gigaset_table,
+	.suspend =	gigaset_suspend,
+	.resume =	gigaset_resume,
+	.reset_resume =	gigaset_resume,
+	.pre_reset =	gigaset_pre_reset,
+	.post_reset =	gigaset_resume,
+};
+
+struct usb_cardstate {
+	struct usb_device	*udev;		/* usb device pointer */
+	struct usb_interface	*interface;	/* interface for this device */
+	int			busy;		/* bulk output in progress */
+
+	/* Output buffer */
+	unsigned char		*bulk_out_buffer;
+	int			bulk_out_size;
+	__u8			bulk_out_endpointAddr;
+	struct urb		*bulk_out_urb;
+
+	/* Input buffer */
+	unsigned char		*rcvbuf;
+	int			rcvbuf_size;
+	struct urb		*read_urb;
+	__u8			int_in_endpointAddr;
+
+	char			bchars[6];		/* for request 0x19 */
+};
+
+static inline unsigned tiocm_to_gigaset(unsigned state)
+{
+	return ((state & TIOCM_DTR) ? 1 : 0) | ((state & TIOCM_RTS) ? 2 : 0);
+}
+
+static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
+				  unsigned new_state)
+{
+	struct usb_device *udev = cs->hw.usb->udev;
+	unsigned mask, val;
+	int r;
+
+	mask = tiocm_to_gigaset(old_state ^ new_state);
+	val = tiocm_to_gigaset(new_state);
+
+	gig_dbg(DEBUG_USBREQ, "set flags 0x%02x with mask 0x%02x", val, mask);
+	r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 7, 0x41,
+			    (val & 0xff) | ((mask & 0xff) << 8), 0,
+			    NULL, 0, 2000 /* timeout? */);
+	if (r < 0)
+		return r;
+	return 0;
+}
+
+/*
+ * Set M105 configuration value
+ * using undocumented device commands reverse engineered from USB traces
+ * of the Siemens Windows driver
+ */
+static int set_value(struct cardstate *cs, u8 req, u16 val)
+{
+	struct usb_device *udev = cs->hw.usb->udev;
+	int r, r2;
+
+	gig_dbg(DEBUG_USBREQ, "request %02x (%04x)",
+		(unsigned)req, (unsigned)val);
+	r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x12, 0x41,
+			    0xf /*?*/, 0, NULL, 0, 2000 /*?*/);
+	/* no idea what this does */
+	if (r < 0) {
+		dev_err(&udev->dev, "error %d on request 0x12\n", -r);
+		return r;
+	}
+
+	r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), req, 0x41,
+			    val, 0, NULL, 0, 2000 /*?*/);
+	if (r < 0)
+		dev_err(&udev->dev, "error %d on request 0x%02x\n",
+			-r, (unsigned)req);
+
+	r2 = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
+			     0, 0, cs->hw.usb->bchars, 6, 2000 /*?*/);
+	if (r2 < 0)
+		dev_err(&udev->dev, "error %d on request 0x19\n", -r2);
+
+	return r < 0 ? r : (r2 < 0 ? r2 : 0);
+}
+
+/*
+ * set the baud rate on the internal serial adapter
+ * using the undocumented parameter setting command
+ */
+static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
+{
+	u16 val;
+	u32 rate;
+
+	cflag &= CBAUD;
+
+	switch (cflag) {
+	case    B300: rate =     300; break;
+	case    B600: rate =     600; break;
+	case   B1200: rate =    1200; break;
+	case   B2400: rate =    2400; break;
+	case   B4800: rate =    4800; break;
+	case   B9600: rate =    9600; break;
+	case  B19200: rate =   19200; break;
+	case  B38400: rate =   38400; break;
+	case  B57600: rate =   57600; break;
+	case B115200: rate =  115200; break;
+	default:
+		rate =  9600;
+		dev_err(cs->dev, "unsupported baudrate request 0x%x,"
+			" using default of B9600\n", cflag);
+	}
+
+	val = 0x383fff / rate + 1;
+
+	return set_value(cs, 1, val);
+}
+
+/*
+ * set the line format on the internal serial adapter
+ * using the undocumented parameter setting command
+ */
+static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
+{
+	u16 val = 0;
+
+	/* set the parity */
+	if (cflag & PARENB)
+		val |= (cflag & PARODD) ? 0x10 : 0x20;
+
+	/* set the number of data bits */
+	switch (cflag & CSIZE) {
+	case CS5:
+		val |= 5 << 8; break;
+	case CS6:
+		val |= 6 << 8; break;
+	case CS7:
+		val |= 7 << 8; break;
+	case CS8:
+		val |= 8 << 8; break;
+	default:
+		dev_err(cs->dev, "CSIZE was not CS5-CS8, using default of 8\n");
+		val |= 8 << 8;
+		break;
+	}
+
+	/* set the number of stop bits */
+	if (cflag & CSTOPB) {
+		if ((cflag & CSIZE) == CS5)
+			val |= 1; /* 1.5 stop bits */
+		else
+			val |= 2; /* 2 stop bits */
+	}
+
+	return set_value(cs, 3, val);
+}
+
+
+/*============================================================================*/
+static int gigaset_init_bchannel(struct bc_state *bcs)
+{
+	/* nothing to do for M10x */
+	gigaset_bchannel_up(bcs);
+	return 0;
+}
+
+static int gigaset_close_bchannel(struct bc_state *bcs)
+{
+	/* nothing to do for M10x */
+	gigaset_bchannel_down(bcs);
+	return 0;
+}
+
+static int write_modem(struct cardstate *cs);
+static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb);
+
+
+/* Write tasklet handler: Continue sending current skb, or send command, or
+ * start sending an skb from the send queue.
+ */
+static void gigaset_modem_fill(unsigned long data)
+{
+	struct cardstate *cs = (struct cardstate *) data;
+	struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
+	struct cmdbuf_t *cb;
+	int again;
+
+	gig_dbg(DEBUG_OUTPUT, "modem_fill");
+
+	if (cs->hw.usb->busy) {
+		gig_dbg(DEBUG_OUTPUT, "modem_fill: busy");
+		return;
+	}
+
+	do {
+		again = 0;
+		if (!bcs->tx_skb) { /* no skb is being sent */
+			cb = cs->cmdbuf;
+			if (cb) { /* commands to send? */
+				gig_dbg(DEBUG_OUTPUT, "modem_fill: cb");
+				if (send_cb(cs, cb) < 0) {
+					gig_dbg(DEBUG_OUTPUT,
+						"modem_fill: send_cb failed");
+					again = 1; /* no callback will be
+						      called! */
+				}
+			} else { /* skbs to send? */
+				bcs->tx_skb = skb_dequeue(&bcs->squeue);
+				if (bcs->tx_skb)
+					gig_dbg(DEBUG_INTR,
+						"Dequeued skb (Adr: %lx)!",
+						(unsigned long) bcs->tx_skb);
+			}
+		}
+
+		if (bcs->tx_skb) {
+			gig_dbg(DEBUG_OUTPUT, "modem_fill: tx_skb");
+			if (write_modem(cs) < 0) {
+				gig_dbg(DEBUG_OUTPUT,
+					"modem_fill: write_modem failed");
+				again = 1; /* no callback will be called! */
+			}
+		}
+	} while (again);
+}
+
+/*
+ * Interrupt Input URB completion routine
+ */
+static void gigaset_read_int_callback(struct urb *urb)
+{
+	struct cardstate *cs = urb->context;
+	struct inbuf_t *inbuf = cs->inbuf;
+	int status = urb->status;
+	int r;
+	unsigned numbytes;
+	unsigned char *src;
+	unsigned long flags;
+
+	if (!status) {
+		numbytes = urb->actual_length;
+
+		if (numbytes) {
+			src = cs->hw.usb->rcvbuf;
+			if (unlikely(*src))
+				dev_warn(cs->dev,
+					 "%s: There was no leading 0, but 0x%02x!\n",
+					 __func__, (unsigned) *src);
+			++src; /* skip leading 0x00 */
+			--numbytes;
+			if (gigaset_fill_inbuf(inbuf, src, numbytes)) {
+				gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
+				gigaset_schedule_event(inbuf->cs);
+			}
+		} else
+			gig_dbg(DEBUG_INTR, "Received zero block length");
+	} else {
+		/* The urb might have been killed. */
+		gig_dbg(DEBUG_ANY, "%s - nonzero status received: %d",
+			__func__, status);
+		if (status == -ENOENT || status == -ESHUTDOWN)
+			/* killed or endpoint shutdown: don't resubmit */
+			return;
+	}
+
+	/* resubmit URB */
+	spin_lock_irqsave(&cs->lock, flags);
+	if (!cs->connected) {
+		spin_unlock_irqrestore(&cs->lock, flags);
+		pr_err("%s: disconnected\n", __func__);
+		return;
+	}
+	r = usb_submit_urb(urb, GFP_ATOMIC);
+	spin_unlock_irqrestore(&cs->lock, flags);
+	if (r)
+		dev_err(cs->dev, "error %d resubmitting URB\n", -r);
+}
+
+
+/* This callback routine is called when data was transmitted to the device. */
+static void gigaset_write_bulk_callback(struct urb *urb)
+{
+	struct cardstate *cs = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	switch (status) {
+	case 0:			/* normal completion */
+		break;
+	case -ENOENT:		/* killed */
+		gig_dbg(DEBUG_ANY, "%s: killed", __func__);
+		cs->hw.usb->busy = 0;
+		return;
+	default:
+		dev_err(cs->dev, "bulk transfer failed (status %d)\n",
+			-status);
+		/* That's all we can do. Communication problems
+		   are handled by timeouts or network protocols. */
+	}
+
+	spin_lock_irqsave(&cs->lock, flags);
+	if (!cs->connected) {
+		pr_err("%s: disconnected\n", __func__);
+	} else {
+		cs->hw.usb->busy = 0;
+		tasklet_schedule(&cs->write_tasklet);
+	}
+	spin_unlock_irqrestore(&cs->lock, flags);
+}
+
+static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb)
+{
+	struct cmdbuf_t *tcb;
+	unsigned long flags;
+	int count;
+	int status = -ENOENT;
+	struct usb_cardstate *ucs = cs->hw.usb;
+
+	do {
+		if (!cb->len) {
+			tcb = cb;
+
+			spin_lock_irqsave(&cs->cmdlock, flags);
+			cs->cmdbytes -= cs->curlen;
+			gig_dbg(DEBUG_OUTPUT, "send_cb: sent %u bytes, %u left",
+				cs->curlen, cs->cmdbytes);
+			cs->cmdbuf = cb = cb->next;
+			if (cb) {
+				cb->prev = NULL;
+				cs->curlen = cb->len;
+			} else {
+				cs->lastcmdbuf = NULL;
+				cs->curlen = 0;
+			}
+			spin_unlock_irqrestore(&cs->cmdlock, flags);
+
+			if (tcb->wake_tasklet)
+				tasklet_schedule(tcb->wake_tasklet);
+			kfree(tcb);
+		}
+		if (cb) {
+			count = min(cb->len, ucs->bulk_out_size);
+			gig_dbg(DEBUG_OUTPUT, "send_cb: send %d bytes", count);
+
+			usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
+					  usb_sndbulkpipe(ucs->udev,
+							  ucs->bulk_out_endpointAddr & 0x0f),
+					  cb->buf + cb->offset, count,
+					  gigaset_write_bulk_callback, cs);
+
+			cb->offset += count;
+			cb->len -= count;
+			ucs->busy = 1;
+
+			spin_lock_irqsave(&cs->lock, flags);
+			status = cs->connected ?
+				usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) :
+				-ENODEV;
+			spin_unlock_irqrestore(&cs->lock, flags);
+
+			if (status) {
+				ucs->busy = 0;
+				dev_err(cs->dev,
+					"could not submit urb (error %d)\n",
+					-status);
+				cb->len = 0; /* skip urb => remove cb+wakeup
+						in next loop cycle */
+			}
+		}
+	} while (cb && status); /* next command on error */
+
+	return status;
+}
+
+/* Send command to device. */
+static int gigaset_write_cmd(struct cardstate *cs, struct cmdbuf_t *cb)
+{
+	unsigned long flags;
+
+	gigaset_dbg_buffer(cs->mstate != MS_LOCKED ?
+			   DEBUG_TRANSCMD : DEBUG_LOCKCMD,
+			   "CMD Transmit", cb->len, cb->buf);
+
+	spin_lock_irqsave(&cs->cmdlock, flags);
+	cb->prev = cs->lastcmdbuf;
+	if (cs->lastcmdbuf)
+		cs->lastcmdbuf->next = cb;
+	else {
+		cs->cmdbuf = cb;
+		cs->curlen = cb->len;
+	}
+	cs->cmdbytes += cb->len;
+	cs->lastcmdbuf = cb;
+	spin_unlock_irqrestore(&cs->cmdlock, flags);
+
+	spin_lock_irqsave(&cs->lock, flags);
+	if (cs->connected)
+		tasklet_schedule(&cs->write_tasklet);
+	spin_unlock_irqrestore(&cs->lock, flags);
+	return cb->len;
+}
+
+static int gigaset_write_room(struct cardstate *cs)
+{
+	unsigned bytes;
+
+	bytes = cs->cmdbytes;
+	return bytes < IF_WRITEBUF ? IF_WRITEBUF - bytes : 0;
+}
+
+static int gigaset_chars_in_buffer(struct cardstate *cs)
+{
+	return cs->cmdbytes;
+}
+
+/*
+ * set the break characters on the internal serial adapter
+ * using undocumented device commands reverse engineered from USB traces
+ * of the Siemens Windows driver
+ */
+static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
+{
+	struct usb_device *udev = cs->hw.usb->udev;
+
+	gigaset_dbg_buffer(DEBUG_USBREQ, "brkchars", 6, buf);
+	memcpy(cs->hw.usb->bchars, buf, 6);
+	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
+			       0, 0, &buf, 6, 2000);
+}
+
+static int gigaset_freebcshw(struct bc_state *bcs)
+{
+	/* unused */
+	return 1;
+}
+
+/* Initialize the b-channel structure */
+static int gigaset_initbcshw(struct bc_state *bcs)
+{
+	/* unused */
+	bcs->hw.usb = NULL;
+	return 1;
+}
+
+static void gigaset_reinitbcshw(struct bc_state *bcs)
+{
+	/* nothing to do for M10x */
+}
+
+static void gigaset_freecshw(struct cardstate *cs)
+{
+	tasklet_kill(&cs->write_tasklet);
+	kfree(cs->hw.usb);
+}
+
+static int gigaset_initcshw(struct cardstate *cs)
+{
+	struct usb_cardstate *ucs;
+
+	cs->hw.usb = ucs =
+		kmalloc(sizeof(struct usb_cardstate), GFP_KERNEL);
+	if (!ucs) {
+		pr_err("out of memory\n");
+		return 0;
+	}
+
+	ucs->bchars[0] = 0;
+	ucs->bchars[1] = 0;
+	ucs->bchars[2] = 0;
+	ucs->bchars[3] = 0;
+	ucs->bchars[4] = 0x11;
+	ucs->bchars[5] = 0x13;
+	ucs->bulk_out_buffer = NULL;
+	ucs->bulk_out_urb = NULL;
+	ucs->read_urb = NULL;
+	tasklet_init(&cs->write_tasklet,
+		     gigaset_modem_fill, (unsigned long) cs);
+
+	return 1;
+}
+
+/* Send data from current skb to the device. */
+static int write_modem(struct cardstate *cs)
+{
+	int ret = 0;
+	int count;
+	struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
+	struct usb_cardstate *ucs = cs->hw.usb;
+	unsigned long flags;
+
+	gig_dbg(DEBUG_OUTPUT, "len: %d...", bcs->tx_skb->len);
+
+	if (!bcs->tx_skb->len) {
+		dev_kfree_skb_any(bcs->tx_skb);
+		bcs->tx_skb = NULL;
+		return -EINVAL;
+	}
+
+	/* Copy data to bulk out buffer and transmit data */
+	count = min(bcs->tx_skb->len, (unsigned) ucs->bulk_out_size);
+	skb_copy_from_linear_data(bcs->tx_skb, ucs->bulk_out_buffer, count);
+	skb_pull(bcs->tx_skb, count);
+	ucs->busy = 1;
+	gig_dbg(DEBUG_OUTPUT, "write_modem: send %d bytes", count);
+
+	spin_lock_irqsave(&cs->lock, flags);
+	if (cs->connected) {
+		usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
+				  usb_sndbulkpipe(ucs->udev,
+						  ucs->bulk_out_endpointAddr &
+						  0x0f),
+				  ucs->bulk_out_buffer, count,
+				  gigaset_write_bulk_callback, cs);
+		ret = usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC);
+	} else {
+		ret = -ENODEV;
+	}
+	spin_unlock_irqrestore(&cs->lock, flags);
+
+	if (ret) {
+		dev_err(cs->dev, "could not submit urb (error %d)\n", -ret);
+		ucs->busy = 0;
+	}
+
+	if (!bcs->tx_skb->len) {
+		/* skb sent completely */
+		gigaset_skb_sent(bcs, bcs->tx_skb);
+
+		gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!",
+			(unsigned long) bcs->tx_skb);
+		dev_kfree_skb_any(bcs->tx_skb);
+		bcs->tx_skb = NULL;
+	}
+
+	return ret;
+}
+
+static int gigaset_probe(struct usb_interface *interface,
+			 const struct usb_device_id *id)
+{
+	int retval;
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_host_interface *hostif = interface->cur_altsetting;
+	struct cardstate *cs = NULL;
+	struct usb_cardstate *ucs = NULL;
+	struct usb_endpoint_descriptor *endpoint;
+	int buffer_size;
+
+	gig_dbg(DEBUG_ANY, "%s: Check if device matches ...", __func__);
+
+	/* See if the device offered us matches what we can accept */
+	if ((le16_to_cpu(udev->descriptor.idVendor)  != USB_M105_VENDOR_ID) ||
+	    (le16_to_cpu(udev->descriptor.idProduct) != USB_M105_PRODUCT_ID)) {
+		gig_dbg(DEBUG_ANY, "device ID (0x%x, 0x%x) not for me - skip",
+			le16_to_cpu(udev->descriptor.idVendor),
+			le16_to_cpu(udev->descriptor.idProduct));
+		return -ENODEV;
+	}
+	if (hostif->desc.bInterfaceNumber != 0) {
+		gig_dbg(DEBUG_ANY, "interface %d not for me - skip",
+			hostif->desc.bInterfaceNumber);
+		return -ENODEV;
+	}
+	if (hostif->desc.bAlternateSetting != 0) {
+		dev_notice(&udev->dev, "unsupported altsetting %d - skip",
+			   hostif->desc.bAlternateSetting);
+		return -ENODEV;
+	}
+	if (hostif->desc.bInterfaceClass != 255) {
+		dev_notice(&udev->dev, "unsupported interface class %d - skip",
+			   hostif->desc.bInterfaceClass);
+		return -ENODEV;
+	}
+
+	dev_info(&udev->dev, "%s: Device matched ... !\n", __func__);
+
+	/* allocate memory for our device state and initialize it */
+	cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
+	if (!cs)
+		return -ENODEV;
+	ucs = cs->hw.usb;
+
+	/* save off device structure ptrs for later use */
+	usb_get_dev(udev);
+	ucs->udev = udev;
+	ucs->interface = interface;
+	cs->dev = &interface->dev;
+
+	/* save address of controller structure */
+	usb_set_intfdata(interface, cs);
+
+	endpoint = &hostif->endpoint[0].desc;
+
+	buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+	ucs->bulk_out_size = buffer_size;
+	ucs->bulk_out_endpointAddr = endpoint->bEndpointAddress;
+	ucs->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
+	if (!ucs->bulk_out_buffer) {
+		dev_err(cs->dev, "Couldn't allocate bulk_out_buffer\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	ucs->bulk_out_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!ucs->bulk_out_urb) {
+		dev_err(cs->dev, "Couldn't allocate bulk_out_urb\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	endpoint = &hostif->endpoint[1].desc;
+
+	ucs->busy = 0;
+
+	ucs->read_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!ucs->read_urb) {
+		dev_err(cs->dev, "No free urbs available\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+	buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+	ucs->rcvbuf_size = buffer_size;
+	ucs->int_in_endpointAddr = endpoint->bEndpointAddress;
+	ucs->rcvbuf = kmalloc(buffer_size, GFP_KERNEL);
+	if (!ucs->rcvbuf) {
+		dev_err(cs->dev, "Couldn't allocate rcvbuf\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+	/* Fill the interrupt urb and send it to the core */
+	usb_fill_int_urb(ucs->read_urb, udev,
+			 usb_rcvintpipe(udev,
+					endpoint->bEndpointAddress & 0x0f),
+			 ucs->rcvbuf, buffer_size,
+			 gigaset_read_int_callback,
+			 cs, endpoint->bInterval);
+
+	retval = usb_submit_urb(ucs->read_urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(cs->dev, "Could not submit URB (error %d)\n", -retval);
+		goto error;
+	}
+
+	/* tell common part that the device is ready */
+	if (startmode == SM_LOCKED)
+		cs->mstate = MS_LOCKED;
+
+	if (!gigaset_start(cs)) {
+		tasklet_kill(&cs->write_tasklet);
+		retval = -ENODEV;
+		goto error;
+	}
+	return 0;
+
+error:
+	usb_kill_urb(ucs->read_urb);
+	kfree(ucs->bulk_out_buffer);
+	usb_free_urb(ucs->bulk_out_urb);
+	kfree(ucs->rcvbuf);
+	usb_free_urb(ucs->read_urb);
+	usb_set_intfdata(interface, NULL);
+	ucs->read_urb = ucs->bulk_out_urb = NULL;
+	ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
+	usb_put_dev(ucs->udev);
+	ucs->udev = NULL;
+	ucs->interface = NULL;
+	gigaset_freecs(cs);
+	return retval;
+}
+
+static void gigaset_disconnect(struct usb_interface *interface)
+{
+	struct cardstate *cs;
+	struct usb_cardstate *ucs;
+
+	cs = usb_get_intfdata(interface);
+	ucs = cs->hw.usb;
+
+	dev_info(cs->dev, "disconnecting Gigaset USB adapter\n");
+
+	usb_kill_urb(ucs->read_urb);
+
+	gigaset_stop(cs);
+
+	usb_set_intfdata(interface, NULL);
+	tasklet_kill(&cs->write_tasklet);
+
+	usb_kill_urb(ucs->bulk_out_urb);
+
+	kfree(ucs->bulk_out_buffer);
+	usb_free_urb(ucs->bulk_out_urb);
+	kfree(ucs->rcvbuf);
+	usb_free_urb(ucs->read_urb);
+	ucs->read_urb = ucs->bulk_out_urb = NULL;
+	ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
+
+	usb_put_dev(ucs->udev);
+	ucs->interface = NULL;
+	ucs->udev = NULL;
+	cs->dev = NULL;
+	gigaset_freecs(cs);
+}
+
+/* gigaset_suspend
+ * This function is called before the USB connection is suspended or reset.
+ */
+static int gigaset_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct cardstate *cs = usb_get_intfdata(intf);
+
+	/* stop activity */
+	cs->connected = 0;	/* prevent rescheduling */
+	usb_kill_urb(cs->hw.usb->read_urb);
+	tasklet_kill(&cs->write_tasklet);
+	usb_kill_urb(cs->hw.usb->bulk_out_urb);
+
+	gig_dbg(DEBUG_SUSPEND, "suspend complete");
+	return 0;
+}
+
+/* gigaset_resume
+ * This function is called after the USB connection has been resumed or reset.
+ */
+static int gigaset_resume(struct usb_interface *intf)
+{
+	struct cardstate *cs = usb_get_intfdata(intf);
+	int rc;
+
+	/* resubmit interrupt URB */
+	cs->connected = 1;
+	rc = usb_submit_urb(cs->hw.usb->read_urb, GFP_KERNEL);
+	if (rc) {
+		dev_err(cs->dev, "Could not submit read URB (error %d)\n", -rc);
+		return rc;
+	}
+
+	gig_dbg(DEBUG_SUSPEND, "resume complete");
+	return 0;
+}
+
+/* gigaset_pre_reset
+ * This function is called before the USB connection is reset.
+ */
+static int gigaset_pre_reset(struct usb_interface *intf)
+{
+	/* same as suspend */
+	return gigaset_suspend(intf, PMSG_ON);
+}
+
+static const struct gigaset_ops ops = {
+	gigaset_write_cmd,
+	gigaset_write_room,
+	gigaset_chars_in_buffer,
+	gigaset_brkchars,
+	gigaset_init_bchannel,
+	gigaset_close_bchannel,
+	gigaset_initbcshw,
+	gigaset_freebcshw,
+	gigaset_reinitbcshw,
+	gigaset_initcshw,
+	gigaset_freecshw,
+	gigaset_set_modem_ctrl,
+	gigaset_baud_rate,
+	gigaset_set_line_ctrl,
+	gigaset_m10x_send_skb,
+	gigaset_m10x_input,
+};
+
+/*
+ * This function is called while kernel-module is loaded
+ */
+static int __init usb_gigaset_init(void)
+{
+	int result;
+
+	/* allocate memory for our driver state and initialize it */
+	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
+				    GIGASET_MODULENAME, GIGASET_DEVNAME,
+				    &ops, THIS_MODULE);
+	if (driver == NULL)
+		goto error;
+
+	/* register this driver with the USB subsystem */
+	result = usb_register(&gigaset_usb_driver);
+	if (result < 0) {
+		pr_err("error %d registering USB driver\n", -result);
+		goto error;
+	}
+
+	pr_info(DRIVER_DESC "\n");
+	return 0;
+
+error:
+	if (driver)
+		gigaset_freedriver(driver);
+	driver = NULL;
+	return -1;
+}
+
+/*
+ * This function is called while unloading the kernel-module
+ */
+static void __exit usb_gigaset_exit(void)
+{
+	int i;
+
+	gigaset_blockdriver(driver); /* => probe will fail
+				      * => no gigaset_start any more
+				      */
+
+	/* stop all connected devices */
+	for (i = 0; i < driver->minors; i++)
+		gigaset_shutdown(driver->cs + i);
+
+	/* from now on, no isdn callback should be possible */
+
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&gigaset_usb_driver);
+	/* this will call the disconnect-callback */
+	/* from now on, no disconnect/probe callback should be running */
+
+	gigaset_freedriver(driver);
+	driver = NULL;
+}
+
+
+module_init(usb_gigaset_init);
+module_exit(usb_gigaset_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+MODULE_LICENSE("GPL");