Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 563 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
new file mode 100644
index 00000000..c14d48dd
--- /dev/null
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -0,0 +1,563 @@
+/*
+    Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+   Supports:
+	Intel PIIX4, 440MX
+	Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
+	ATI IXP200, IXP300, IXP400, SB600, SB700, SB800
+	AMD Hudson-2
+	SMSC Victory66
+
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+
+/* PIIX4 SMBus address offsets */
+#define SMBHSTSTS	(0 + piix4_smba)
+#define SMBHSLVSTS	(1 + piix4_smba)
+#define SMBHSTCNT	(2 + piix4_smba)
+#define SMBHSTCMD	(3 + piix4_smba)
+#define SMBHSTADD	(4 + piix4_smba)
+#define SMBHSTDAT0	(5 + piix4_smba)
+#define SMBHSTDAT1	(6 + piix4_smba)
+#define SMBBLKDAT	(7 + piix4_smba)
+#define SMBSLVCNT	(8 + piix4_smba)
+#define SMBSHDWCMD	(9 + piix4_smba)
+#define SMBSLVEVT	(0xA + piix4_smba)
+#define SMBSLVDAT	(0xC + piix4_smba)
+
+/* count for request_region */
+#define SMBIOSIZE	8
+
+/* PCI Address Constants */
+#define SMBBA		0x090
+#define SMBHSTCFG	0x0D2
+#define SMBSLVC		0x0D3
+#define SMBSHDW1	0x0D4
+#define SMBSHDW2	0x0D5
+#define SMBREV		0x0D6
+
+/* Other settings */
+#define MAX_TIMEOUT	500
+#define  ENABLE_INT9	0
+
+/* PIIX4 constants */
+#define PIIX4_QUICK		0x00
+#define PIIX4_BYTE		0x04
+#define PIIX4_BYTE_DATA		0x08
+#define PIIX4_WORD_DATA		0x0C
+#define PIIX4_BLOCK_DATA	0x14
+
+/* insmod parameters */
+
+/* If force is set to anything different from 0, we forcibly enable the
+   PIIX4. DANGEROUS! */
+static int force;
+module_param (force, int, 0);
+MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
+
+/* If force_addr is set to anything different from 0, we forcibly enable
+   the PIIX4 at the given address. VERY DANGEROUS! */
+static int force_addr;
+module_param (force_addr, int, 0);
+MODULE_PARM_DESC(force_addr,
+		 "Forcibly enable the PIIX4 at the given address. "
+		 "EXTREMELY DANGEROUS!");
+
+static unsigned short piix4_smba;
+static int srvrworks_csb5_delay;
+static struct pci_driver piix4_driver;
+static struct i2c_adapter piix4_adapter;
+
+static struct dmi_system_id __devinitdata piix4_dmi_blacklist[] = {
+	{
+		.ident = "Sapphire AM2RD790",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "SAPPHIRE Inc."),
+			DMI_MATCH(DMI_BOARD_NAME, "PC-AM2RD790"),
+		},
+	},
+	{
+		.ident = "DFI Lanparty UT 790FX",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "DFI Inc."),
+			DMI_MATCH(DMI_BOARD_NAME, "LP UT 790FX"),
+		},
+	},
+	{ }
+};
+
+/* The IBM entry is in a separate table because we only check it
+   on Intel-based systems */
+static struct dmi_system_id __devinitdata piix4_dmi_ibm[] = {
+	{
+		.ident = "IBM",
+		.matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), },
+	},
+	{ },
+};
+
+static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
+				const struct pci_device_id *id)
+{
+	unsigned char temp;
+
+	if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) &&
+	    (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5))
+		srvrworks_csb5_delay = 1;
+
+	/* On some motherboards, it was reported that accessing the SMBus
+	   caused severe hardware problems */
+	if (dmi_check_system(piix4_dmi_blacklist)) {
+		dev_err(&PIIX4_dev->dev,
+			"Accessing the SMBus on this system is unsafe!\n");
+		return -EPERM;
+	}
+
+	/* Don't access SMBus on IBM systems which get corrupted eeproms */
+	if (dmi_check_system(piix4_dmi_ibm) &&
+			PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
+		dev_err(&PIIX4_dev->dev, "IBM system detected; this module "
+			"may corrupt your serial eeprom! Refusing to load "
+			"module!\n");
+		return -EPERM;
+	}
+
+	/* Determine the address of the SMBus areas */
+	if (force_addr) {
+		piix4_smba = force_addr & 0xfff0;
+		force = 0;
+	} else {
+		pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba);
+		piix4_smba &= 0xfff0;
+		if(piix4_smba == 0) {
+			dev_err(&PIIX4_dev->dev, "SMBus base address "
+				"uninitialized - upgrade BIOS or use "
+				"force_addr=0xaddr\n");
+			return -ENODEV;
+		}
+	}
+
+	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
+		return -ENODEV;
+
+	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
+		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
+			piix4_smba);
+		return -EBUSY;
+	}
+
+	pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
+
+	/* If force_addr is set, we program the new address here. Just to make
+	   sure, we disable the PIIX4 first. */
+	if (force_addr) {
+		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe);
+		pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba);
+		pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01);
+		dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to "
+			"new address %04x!\n", piix4_smba);
+	} else if ((temp & 1) == 0) {
+		if (force) {
+			/* This should never need to be done, but has been
+			 * noted that many Dell machines have the SMBus
+			 * interface on the PIIX4 disabled!? NOTE: This assumes
+			 * I/O space and other allocations WERE done by the
+			 * Bios!  Don't complain if your hardware does weird
+			 * things after enabling this. :') Check for Bios
+			 * updates before resorting to this.
+			 */
+			pci_write_config_byte(PIIX4_dev, SMBHSTCFG,
+					      temp | 1);
+			dev_printk(KERN_NOTICE, &PIIX4_dev->dev,
+				"WARNING: SMBus interface has been "
+				"FORCEFULLY ENABLED!\n");
+		} else {
+			dev_err(&PIIX4_dev->dev,
+				"Host SMBus controller not enabled!\n");
+			release_region(piix4_smba, SMBIOSIZE);
+			piix4_smba = 0;
+			return -ENODEV;
+		}
+	}
+
+	if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2))
+		dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n");
+	else if ((temp & 0x0E) == 0)
+		dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n");
+	else
+		dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration "
+			"(or code out of date)!\n");
+
+	pci_read_config_byte(PIIX4_dev, SMBREV, &temp);
+	dev_info(&PIIX4_dev->dev,
+		 "SMBus Host Controller at 0x%x, revision %d\n",
+		 piix4_smba, temp);
+
+	return 0;
+}
+
+static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev,
+				const struct pci_device_id *id)
+{
+	unsigned short smba_idx = 0xcd6;
+	u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c;
+
+	/* SB800 and later SMBus does not support forcing address */
+	if (force || force_addr) {
+		dev_err(&PIIX4_dev->dev, "SMBus does not support "
+			"forcing address!\n");
+		return -EINVAL;
+	}
+
+	/* Determine the address of the SMBus areas */
+	if (!request_region(smba_idx, 2, "smba_idx")) {
+		dev_err(&PIIX4_dev->dev, "SMBus base address index region "
+			"0x%x already in use!\n", smba_idx);
+		return -EBUSY;
+	}
+	outb_p(smb_en, smba_idx);
+	smba_en_lo = inb_p(smba_idx + 1);
+	outb_p(smb_en + 1, smba_idx);
+	smba_en_hi = inb_p(smba_idx + 1);
+	release_region(smba_idx, 2);
+
+	if ((smba_en_lo & 1) == 0) {
+		dev_err(&PIIX4_dev->dev,
+			"Host SMBus controller not enabled!\n");
+		return -ENODEV;
+	}
+
+	piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
+	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
+		return -ENODEV;
+
+	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
+		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
+			piix4_smba);
+		return -EBUSY;
+	}
+
+	/* Request the SMBus I2C bus config region */
+	if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) {
+		dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region "
+			"0x%x already in use!\n", piix4_smba + i2ccfg_offset);
+		release_region(piix4_smba, SMBIOSIZE);
+		piix4_smba = 0;
+		return -EBUSY;
+	}
+	i2ccfg = inb_p(piix4_smba + i2ccfg_offset);
+	release_region(piix4_smba + i2ccfg_offset, 1);
+
+	if (i2ccfg & 1)
+		dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus.\n");
+	else
+		dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus.\n");
+
+	dev_info(&PIIX4_dev->dev,
+		 "SMBus Host Controller at 0x%x, revision %d\n",
+		 piix4_smba, i2ccfg >> 4);
+
+	return 0;
+}
+
+static int piix4_transaction(void)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&piix4_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
+		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+		inb_p(SMBHSTDAT1));
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+		dev_dbg(&piix4_adapter.dev, "SMBus busy (%02x). "
+			"Resetting...\n", temp);
+		outb_p(temp, SMBHSTSTS);
+		if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+			dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp);
+			return -EBUSY;
+		} else {
+			dev_dbg(&piix4_adapter.dev, "Successful!\n");
+		}
+	}
+
+	/* start the transaction by setting bit 6 */
+	outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+
+	/* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
+	if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */
+		msleep(2);
+	else
+		msleep(1);
+
+	while ((++timeout < MAX_TIMEOUT) &&
+	       ((temp = inb_p(SMBHSTSTS)) & 0x01))
+		msleep(1);
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout == MAX_TIMEOUT) {
+		dev_err(&piix4_adapter.dev, "SMBus Timeout!\n");
+		result = -ETIMEDOUT;
+	}
+
+	if (temp & 0x10) {
+		result = -EIO;
+		dev_err(&piix4_adapter.dev, "Error: Failed bus transaction\n");
+	}
+
+	if (temp & 0x08) {
+		result = -EIO;
+		dev_dbg(&piix4_adapter.dev, "Bus collision! SMBus may be "
+			"locked until next hard reset. (sorry!)\n");
+		/* Clock stops and slave is stuck in mid-transmission */
+	}
+
+	if (temp & 0x04) {
+		result = -ENXIO;
+		dev_dbg(&piix4_adapter.dev, "Error: no response!\n");
+	}
+
+	if (inb_p(SMBHSTSTS) != 0x00)
+		outb_p(inb(SMBHSTSTS), SMBHSTSTS);
+
+	if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
+		dev_err(&piix4_adapter.dev, "Failed reset at end of "
+			"transaction (%02x)\n", temp);
+	}
+	dev_dbg(&piix4_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
+		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
+		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+		inb_p(SMBHSTDAT1));
+	return result;
+}
+
+/* Return negative errno on error. */
+static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
+		 unsigned short flags, char read_write,
+		 u8 command, int size, union i2c_smbus_data * data)
+{
+	int i, len;
+	int status;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		outb_p((addr << 1) | read_write,
+		       SMBHSTADD);
+		size = PIIX4_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p((addr << 1) | read_write,
+		       SMBHSTADD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD);
+		size = PIIX4_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p((addr << 1) | read_write,
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0);
+		size = PIIX4_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p((addr << 1) | read_write,
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0);
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+		}
+		size = PIIX4_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p((addr << 1) | read_write,
+		       SMBHSTADD);
+		outb_p(command, SMBHSTCMD);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+				return -EINVAL;
+			outb_p(len, SMBHSTDAT0);
+			i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i], SMBBLKDAT);
+		}
+		size = PIIX4_BLOCK_DATA;
+		break;
+	default:
+		dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+
+	status = piix4_transaction();
+	if (status)
+		return status;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK))
+		return 0;
+
+
+	switch (size) {
+	case PIIX4_BYTE:
+	case PIIX4_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0);
+		break;
+	case PIIX4_WORD_DATA:
+		data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
+		break;
+	case PIIX4_BLOCK_DATA:
+		data->block[0] = inb_p(SMBHSTDAT0);
+		if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			return -EPROTO;
+		i = inb_p(SMBHSTCNT);	/* Reset SMBBLKDAT */
+		for (i = 1; i <= data->block[0]; i++)
+			data->block[i] = inb_p(SMBBLKDAT);
+		break;
+	}
+	return 0;
+}
+
+static u32 piix4_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= piix4_access,
+	.functionality	= piix4_func,
+};
+
+static struct i2c_adapter piix4_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &smbus_algorithm,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+		     PCI_DEVICE_ID_SERVERWORKS_OSB4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+		     PCI_DEVICE_ID_SERVERWORKS_CSB5) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+		     PCI_DEVICE_ID_SERVERWORKS_CSB6) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+		     PCI_DEVICE_ID_SERVERWORKS_HT1000SB) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
+		     PCI_DEVICE_ID_SERVERWORKS_HT1100LD) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, piix4_ids);
+
+static int __devinit piix4_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
+{
+	int retval;
+
+	if ((dev->vendor == PCI_VENDOR_ID_ATI &&
+	     dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
+	     dev->revision >= 0x40) ||
+	    dev->vendor == PCI_VENDOR_ID_AMD)
+		/* base address location etc changed in SB800 */
+		retval = piix4_setup_sb800(dev, id);
+	else
+		retval = piix4_setup(dev, id);
+
+	if (retval)
+		return retval;
+
+	/* set up the sysfs linkage to our parent device */
+	piix4_adapter.dev.parent = &dev->dev;
+
+	snprintf(piix4_adapter.name, sizeof(piix4_adapter.name),
+		"SMBus PIIX4 adapter at %04x", piix4_smba);
+
+	if ((retval = i2c_add_adapter(&piix4_adapter))) {
+		dev_err(&dev->dev, "Couldn't register adapter!\n");
+		release_region(piix4_smba, SMBIOSIZE);
+		piix4_smba = 0;
+	}
+
+	return retval;
+}
+
+static void __devexit piix4_remove(struct pci_dev *dev)
+{
+	if (piix4_smba) {
+		i2c_del_adapter(&piix4_adapter);
+		release_region(piix4_smba, SMBIOSIZE);
+		piix4_smba = 0;
+	}
+}
+
+static struct pci_driver piix4_driver = {
+	.name		= "piix4_smbus",
+	.id_table	= piix4_ids,
+	.probe		= piix4_probe,
+	.remove		= __devexit_p(piix4_remove),
+};
+
+static int __init i2c_piix4_init(void)
+{
+	return pci_register_driver(&piix4_driver);
+}
+
+static void __exit i2c_piix4_exit(void)
+{
+	pci_unregister_driver(&piix4_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
+		"Philip Edelbrock <phil@netroedge.com>");
+MODULE_DESCRIPTION("PIIX4 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_piix4_init);
+module_exit(i2c_piix4_exit);