Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 949 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
new file mode 100644
index 00000000..ae2945a5
--- /dev/null
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -0,0 +1,949 @@
+/*
+    Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
+    Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
+    <mdsxyz123@yahoo.com>
+    Copyright (C) 2007 - 2012  Jean Delvare <khali@linux-fr.org>
+    Copyright (C) 2010         Intel Corporation,
+                               David Woodhouse <dwmw2@infradead.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+  Supports the following Intel I/O Controller Hubs (ICH):
+
+                                  I/O                     Block   I2C
+                                  region  SMBus   Block   proc.   block
+  Chip name             PCI ID    size    PEC     buffer  call    read
+  ----------------------------------------------------------------------
+  82801AA  (ICH)        0x2413     16      no      no      no      no
+  82801AB  (ICH0)       0x2423     16      no      no      no      no
+  82801BA  (ICH2)       0x2443     16      no      no      no      no
+  82801CA  (ICH3)       0x2483     32     soft     no      no      no
+  82801DB  (ICH4)       0x24c3     32     hard     yes     no      no
+  82801E   (ICH5)       0x24d3     32     hard     yes     yes     yes
+  6300ESB               0x25a4     32     hard     yes     yes     yes
+  82801F   (ICH6)       0x266a     32     hard     yes     yes     yes
+  6310ESB/6320ESB       0x269b     32     hard     yes     yes     yes
+  82801G   (ICH7)       0x27da     32     hard     yes     yes     yes
+  82801H   (ICH8)       0x283e     32     hard     yes     yes     yes
+  82801I   (ICH9)       0x2930     32     hard     yes     yes     yes
+  EP80579 (Tolapai)     0x5032     32     hard     yes     yes     yes
+  ICH10                 0x3a30     32     hard     yes     yes     yes
+  ICH10                 0x3a60     32     hard     yes     yes     yes
+  5/3400 Series (PCH)   0x3b30     32     hard     yes     yes     yes
+  6 Series (PCH)        0x1c22     32     hard     yes     yes     yes
+  Patsburg (PCH)        0x1d22     32     hard     yes     yes     yes
+  Patsburg (PCH) IDF    0x1d70     32     hard     yes     yes     yes
+  Patsburg (PCH) IDF    0x1d71     32     hard     yes     yes     yes
+  Patsburg (PCH) IDF    0x1d72     32     hard     yes     yes     yes
+  DH89xxCC (PCH)        0x2330     32     hard     yes     yes     yes
+  Panther Point (PCH)   0x1e22     32     hard     yes     yes     yes
+  Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
+
+  Features supported by this driver:
+  Software PEC                     no
+  Hardware PEC                     yes
+  Block buffer                     yes
+  Block process call transaction   no
+  I2C block read transaction       yes  (doesn't use the block buffer)
+  Slave mode                       no
+
+  See the file Documentation/i2c/busses/i2c-i801 for details.
+*/
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+
+/* I801 SMBus address offsets */
+#define SMBHSTSTS(p)	(0 + (p)->smba)
+#define SMBHSTCNT(p)	(2 + (p)->smba)
+#define SMBHSTCMD(p)	(3 + (p)->smba)
+#define SMBHSTADD(p)	(4 + (p)->smba)
+#define SMBHSTDAT0(p)	(5 + (p)->smba)
+#define SMBHSTDAT1(p)	(6 + (p)->smba)
+#define SMBBLKDAT(p)	(7 + (p)->smba)
+#define SMBPEC(p)	(8 + (p)->smba)		/* ICH3 and later */
+#define SMBAUXSTS(p)	(12 + (p)->smba)	/* ICH4 and later */
+#define SMBAUXCTL(p)	(13 + (p)->smba)	/* ICH4 and later */
+
+/* PCI Address Constants */
+#define SMBBAR		4
+#define SMBHSTCFG	0x040
+
+/* Host configuration bits for SMBHSTCFG */
+#define SMBHSTCFG_HST_EN	1
+#define SMBHSTCFG_SMB_SMI_EN	2
+#define SMBHSTCFG_I2C_EN	4
+
+/* Auxiliary control register bits, ICH4+ only */
+#define SMBAUXCTL_CRC		1
+#define SMBAUXCTL_E32B		2
+
+/* kill bit for SMBHSTCNT */
+#define SMBHSTCNT_KILL		2
+
+/* Other settings */
+#define MAX_RETRIES		400
+#define ENABLE_INT9		0	/* set to 0x01 to enable - untested */
+
+/* I801 command constants */
+#define I801_QUICK		0x00
+#define I801_BYTE		0x04
+#define I801_BYTE_DATA		0x08
+#define I801_WORD_DATA		0x0C
+#define I801_PROC_CALL		0x10	/* unimplemented */
+#define I801_BLOCK_DATA		0x14
+#define I801_I2C_BLOCK_DATA	0x18	/* ICH5 and later */
+#define I801_BLOCK_LAST		0x34
+#define I801_I2C_BLOCK_LAST	0x38	/* ICH5 and later */
+#define I801_START		0x40
+#define I801_PEC_EN		0x80	/* ICH3 and later */
+
+/* I801 Hosts Status register bits */
+#define SMBHSTSTS_BYTE_DONE	0x80
+#define SMBHSTSTS_INUSE_STS	0x40
+#define SMBHSTSTS_SMBALERT_STS	0x20
+#define SMBHSTSTS_FAILED	0x10
+#define SMBHSTSTS_BUS_ERR	0x08
+#define SMBHSTSTS_DEV_ERR	0x04
+#define SMBHSTSTS_INTR		0x02
+#define SMBHSTSTS_HOST_BUSY	0x01
+
+#define STATUS_FLAGS		(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \
+				 SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
+				 SMBHSTSTS_INTR)
+
+/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS	0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS	0x1d22
+/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0	0x1d70
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1	0x1d71
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2	0x1d72
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
+
+struct i801_priv {
+	struct i2c_adapter adapter;
+	unsigned long smba;
+	unsigned char original_hstcfg;
+	struct pci_dev *pci_dev;
+	unsigned int features;
+};
+
+static struct pci_driver i801_driver;
+
+#define FEATURE_SMBUS_PEC	(1 << 0)
+#define FEATURE_BLOCK_BUFFER	(1 << 1)
+#define FEATURE_BLOCK_PROC	(1 << 2)
+#define FEATURE_I2C_BLOCK_READ	(1 << 3)
+/* Not really a feature, but it's convenient to handle it as such */
+#define FEATURE_IDF		(1 << 15)
+
+static const char *i801_feature_names[] = {
+	"SMBus PEC",
+	"Block buffer",
+	"Block process call",
+	"I2C block read",
+};
+
+static unsigned int disable_features;
+module_param(disable_features, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable_features, "Disable selected driver features");
+
+/* Make sure the SMBus host is ready to start transmitting.
+   Return 0 if it is, -EBUSY if it is not. */
+static int i801_check_pre(struct i801_priv *priv)
+{
+	int status;
+
+	status = inb_p(SMBHSTSTS(priv));
+	if (status & SMBHSTSTS_HOST_BUSY) {
+		dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n");
+		return -EBUSY;
+	}
+
+	status &= STATUS_FLAGS;
+	if (status) {
+		dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n",
+			status);
+		outb_p(status, SMBHSTSTS(priv));
+		status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
+		if (status) {
+			dev_err(&priv->pci_dev->dev,
+				"Failed clearing status flags (%02x)\n",
+				status);
+			return -EBUSY;
+		}
+	}
+
+	return 0;
+}
+
+/* Convert the status register to an error code, and clear it. */
+static int i801_check_post(struct i801_priv *priv, int status, int timeout)
+{
+	int result = 0;
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout) {
+		dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
+		/* try to stop the current command */
+		dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
+		outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
+		       SMBHSTCNT(priv));
+		usleep_range(1000, 2000);
+		outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
+		       SMBHSTCNT(priv));
+
+		/* Check if it worked */
+		status = inb_p(SMBHSTSTS(priv));
+		if ((status & SMBHSTSTS_HOST_BUSY) ||
+		    !(status & SMBHSTSTS_FAILED))
+			dev_err(&priv->pci_dev->dev,
+				"Failed terminating the transaction\n");
+		outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
+		return -ETIMEDOUT;
+	}
+
+	if (status & SMBHSTSTS_FAILED) {
+		result = -EIO;
+		dev_err(&priv->pci_dev->dev, "Transaction failed\n");
+	}
+	if (status & SMBHSTSTS_DEV_ERR) {
+		result = -ENXIO;
+		dev_dbg(&priv->pci_dev->dev, "No response\n");
+	}
+	if (status & SMBHSTSTS_BUS_ERR) {
+		result = -EAGAIN;
+		dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
+	}
+
+	if (result) {
+		/* Clear error flags */
+		outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
+		status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
+		if (status) {
+			dev_warn(&priv->pci_dev->dev, "Failed clearing status "
+				 "flags at end of transaction (%02x)\n",
+				 status);
+		}
+	}
+
+	return result;
+}
+
+static int i801_transaction(struct i801_priv *priv, int xact)
+{
+	int status;
+	int result;
+	int timeout = 0;
+
+	result = i801_check_pre(priv);
+	if (result < 0)
+		return result;
+
+	/* the current contents of SMBHSTCNT can be overwritten, since PEC,
+	 * INTREN, SMBSCMD are passed in xact */
+	outb_p(xact | I801_START, SMBHSTCNT(priv));
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		usleep_range(250, 500);
+		status = inb_p(SMBHSTSTS(priv));
+	} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES));
+
+	result = i801_check_post(priv, status, timeout > MAX_RETRIES);
+	if (result < 0)
+		return result;
+
+	outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+	return 0;
+}
+
+/* wait for INTR bit as advised by Intel */
+static void i801_wait_hwpec(struct i801_priv *priv)
+{
+	int timeout = 0;
+	int status;
+
+	do {
+		usleep_range(250, 500);
+		status = inb_p(SMBHSTSTS(priv));
+	} while ((!(status & SMBHSTSTS_INTR))
+		 && (timeout++ < MAX_RETRIES));
+
+	if (timeout > MAX_RETRIES)
+		dev_dbg(&priv->pci_dev->dev, "PEC Timeout!\n");
+
+	outb_p(status, SMBHSTSTS(priv));
+}
+
+static int i801_block_transaction_by_block(struct i801_priv *priv,
+					   union i2c_smbus_data *data,
+					   char read_write, int hwpec)
+{
+	int i, len;
+	int status;
+
+	inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
+
+	/* Use 32-byte buffer to process this transaction */
+	if (read_write == I2C_SMBUS_WRITE) {
+		len = data->block[0];
+		outb_p(len, SMBHSTDAT0(priv));
+		for (i = 0; i < len; i++)
+			outb_p(data->block[i+1], SMBBLKDAT(priv));
+	}
+
+	status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 |
+				  I801_PEC_EN * hwpec);
+	if (status)
+		return status;
+
+	if (read_write == I2C_SMBUS_READ) {
+		len = inb_p(SMBHSTDAT0(priv));
+		if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+			return -EPROTO;
+
+		data->block[0] = len;
+		for (i = 0; i < len; i++)
+			data->block[i + 1] = inb_p(SMBBLKDAT(priv));
+	}
+	return 0;
+}
+
+static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
+					       union i2c_smbus_data *data,
+					       char read_write, int command,
+					       int hwpec)
+{
+	int i, len;
+	int smbcmd;
+	int status;
+	int result;
+	int timeout;
+
+	result = i801_check_pre(priv);
+	if (result < 0)
+		return result;
+
+	len = data->block[0];
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		outb_p(len, SMBHSTDAT0(priv));
+		outb_p(data->block[1], SMBBLKDAT(priv));
+	}
+
+	for (i = 1; i <= len; i++) {
+		if (i == len && read_write == I2C_SMBUS_READ) {
+			if (command == I2C_SMBUS_I2C_BLOCK_DATA)
+				smbcmd = I801_I2C_BLOCK_LAST;
+			else
+				smbcmd = I801_BLOCK_LAST;
+		} else {
+			if (command == I2C_SMBUS_I2C_BLOCK_DATA
+			 && read_write == I2C_SMBUS_READ)
+				smbcmd = I801_I2C_BLOCK_DATA;
+			else
+				smbcmd = I801_BLOCK_DATA;
+		}
+		outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
+
+		if (i == 1)
+			outb_p(inb(SMBHSTCNT(priv)) | I801_START,
+			       SMBHSTCNT(priv));
+
+		/* We will always wait for a fraction of a second! */
+		timeout = 0;
+		do {
+			usleep_range(250, 500);
+			status = inb_p(SMBHSTSTS(priv));
+		} while ((!(status & SMBHSTSTS_BYTE_DONE))
+			 && (timeout++ < MAX_RETRIES));
+
+		result = i801_check_post(priv, status, timeout > MAX_RETRIES);
+		if (result < 0)
+			return result;
+
+		if (i == 1 && read_write == I2C_SMBUS_READ
+		 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
+			len = inb_p(SMBHSTDAT0(priv));
+			if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+				dev_err(&priv->pci_dev->dev,
+					"Illegal SMBus block read size %d\n",
+					len);
+				/* Recover */
+				while (inb_p(SMBHSTSTS(priv)) &
+				       SMBHSTSTS_HOST_BUSY)
+					outb_p(SMBHSTSTS_BYTE_DONE,
+					       SMBHSTSTS(priv));
+				outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
+				return -EPROTO;
+			}
+			data->block[0] = len;
+		}
+
+		/* Retrieve/store value in SMBBLKDAT */
+		if (read_write == I2C_SMBUS_READ)
+			data->block[i] = inb_p(SMBBLKDAT(priv));
+		if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
+			outb_p(data->block[i+1], SMBBLKDAT(priv));
+
+		/* signals SMBBLKDAT ready */
+		outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
+	}
+
+	return 0;
+}
+
+static int i801_set_block_buffer_mode(struct i801_priv *priv)
+{
+	outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
+	if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
+		return -EIO;
+	return 0;
+}
+
+/* Block transaction function */
+static int i801_block_transaction(struct i801_priv *priv,
+				  union i2c_smbus_data *data, char read_write,
+				  int command, int hwpec)
+{
+	int result = 0;
+	unsigned char hostc;
+
+	if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+		if (read_write == I2C_SMBUS_WRITE) {
+			/* set I2C_EN bit in configuration register */
+			pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
+			pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
+					      hostc | SMBHSTCFG_I2C_EN);
+		} else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
+			dev_err(&priv->pci_dev->dev,
+				"I2C block read is unsupported!\n");
+			return -EOPNOTSUPP;
+		}
+	}
+
+	if (read_write == I2C_SMBUS_WRITE
+	 || command == I2C_SMBUS_I2C_BLOCK_DATA) {
+		if (data->block[0] < 1)
+			data->block[0] = 1;
+		if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			data->block[0] = I2C_SMBUS_BLOCK_MAX;
+	} else {
+		data->block[0] = 32;	/* max for SMBus block reads */
+	}
+
+	/* Experience has shown that the block buffer can only be used for
+	   SMBus (not I2C) block transactions, even though the datasheet
+	   doesn't mention this limitation. */
+	if ((priv->features & FEATURE_BLOCK_BUFFER)
+	 && command != I2C_SMBUS_I2C_BLOCK_DATA
+	 && i801_set_block_buffer_mode(priv) == 0)
+		result = i801_block_transaction_by_block(priv, data,
+							 read_write, hwpec);
+	else
+		result = i801_block_transaction_byte_by_byte(priv, data,
+							     read_write,
+							     command, hwpec);
+
+	if (result == 0 && hwpec)
+		i801_wait_hwpec(priv);
+
+	if (command == I2C_SMBUS_I2C_BLOCK_DATA
+	 && read_write == I2C_SMBUS_WRITE) {
+		/* restore saved configuration register value */
+		pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
+	}
+	return result;
+}
+
+/* Return negative errno on error. */
+static s32 i801_access(struct i2c_adapter *adap, u16 addr,
+		       unsigned short flags, char read_write, u8 command,
+		       int size, union i2c_smbus_data *data)
+{
+	int hwpec;
+	int block = 0;
+	int ret, xact = 0;
+	struct i801_priv *priv = i2c_get_adapdata(adap);
+
+	hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
+		&& size != I2C_SMBUS_QUICK
+		&& size != I2C_SMBUS_I2C_BLOCK_DATA;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		xact = I801_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMBHSTCMD(priv));
+		xact = I801_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		outb_p(command, SMBHSTCMD(priv));
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(data->byte, SMBHSTDAT0(priv));
+		xact = I801_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		outb_p(command, SMBHSTCMD(priv));
+		if (read_write == I2C_SMBUS_WRITE) {
+			outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+			outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+		}
+		xact = I801_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMBHSTADD(priv));
+		outb_p(command, SMBHSTCMD(priv));
+		block = 1;
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		/* NB: page 240 of ICH5 datasheet shows that the R/#W
+		 * bit should be cleared here, even when reading */
+		outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+		if (read_write == I2C_SMBUS_READ) {
+			/* NB: page 240 of ICH5 datasheet also shows
+			 * that DATA1 is the cmd field when reading */
+			outb_p(command, SMBHSTDAT1(priv));
+		} else
+			outb_p(command, SMBHSTCMD(priv));
+		block = 1;
+		break;
+	default:
+		dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
+			size);
+		return -EOPNOTSUPP;
+	}
+
+	if (hwpec)	/* enable/disable hardware PEC */
+		outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
+	else
+		outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
+		       SMBAUXCTL(priv));
+
+	if (block)
+		ret = i801_block_transaction(priv, data, read_write, size,
+					     hwpec);
+	else
+		ret = i801_transaction(priv, xact | ENABLE_INT9);
+
+	/* Some BIOSes don't like it when PEC is enabled at reboot or resume
+	   time, so we forcibly disable it after every transaction. Turn off
+	   E32B for the same reason. */
+	if (hwpec || block)
+		outb_p(inb_p(SMBAUXCTL(priv)) &
+		       ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+	if (block)
+		return ret;
+	if (ret)
+		return ret;
+	if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
+		return 0;
+
+	switch (xact & 0x7f) {
+	case I801_BYTE:	/* Result put in SMBHSTDAT0 */
+	case I801_BYTE_DATA:
+		data->byte = inb_p(SMBHSTDAT0(priv));
+		break;
+	case I801_WORD_DATA:
+		data->word = inb_p(SMBHSTDAT0(priv)) +
+			     (inb_p(SMBHSTDAT1(priv)) << 8);
+		break;
+	}
+	return 0;
+}
+
+
+static u32 i801_func(struct i2c_adapter *adapter)
+{
+	struct i801_priv *priv = i2c_get_adapdata(adapter);
+
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
+	       ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
+	       ((priv->features & FEATURE_I2C_BLOCK_READ) ?
+		I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.smbus_xfer	= i801_access,
+	.functionality	= i801_func,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EP80579_1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, i801_ids);
+
+#if defined CONFIG_X86 && defined CONFIG_DMI
+static unsigned char apanel_addr;
+
+/* Scan the system ROM for the signature "FJKEYINF" */
+static __init const void __iomem *bios_signature(const void __iomem *bios)
+{
+	ssize_t offset;
+	const unsigned char signature[] = "FJKEYINF";
+
+	for (offset = 0; offset < 0x10000; offset += 0x10) {
+		if (check_signature(bios + offset, signature,
+				    sizeof(signature)-1))
+			return bios + offset;
+	}
+	return NULL;
+}
+
+static void __init input_apanel_init(void)
+{
+	void __iomem *bios;
+	const void __iomem *p;
+
+	bios = ioremap(0xF0000, 0x10000); /* Can't fail */
+	p = bios_signature(bios);
+	if (p) {
+		/* just use the first address */
+		apanel_addr = readb(p + 8 + 3) >> 1;
+	}
+	iounmap(bios);
+}
+
+struct dmi_onboard_device_info {
+	const char *name;
+	u8 type;
+	unsigned short i2c_addr;
+	const char *i2c_type;
+};
+
+static struct dmi_onboard_device_info __devinitdata dmi_devices[] = {
+	{ "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
+	{ "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
+	{ "Hades",  DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
+};
+
+static void __devinit dmi_check_onboard_device(u8 type, const char *name,
+					       struct i2c_adapter *adap)
+{
+	int i;
+	struct i2c_board_info info;
+
+	for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
+		/* & ~0x80, ignore enabled/disabled bit */
+		if ((type & ~0x80) != dmi_devices[i].type)
+			continue;
+		if (strcasecmp(name, dmi_devices[i].name))
+			continue;
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		info.addr = dmi_devices[i].i2c_addr;
+		strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
+		i2c_new_device(adap, &info);
+		break;
+	}
+}
+
+/* We use our own function to check for onboard devices instead of
+   dmi_find_device() as some buggy BIOS's have the devices we are interested
+   in marked as disabled */
+static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm,
+						void *adap)
+{
+	int i, count;
+
+	if (dm->type != 10)
+		return;
+
+	count = (dm->length - sizeof(struct dmi_header)) / 2;
+	for (i = 0; i < count; i++) {
+		const u8 *d = (char *)(dm + 1) + (i * 2);
+		const char *name = ((char *) dm) + dm->length;
+		u8 type = d[0];
+		u8 s = d[1];
+
+		if (!s)
+			continue;
+		s--;
+		while (s > 0 && name[0]) {
+			name += strlen(name) + 1;
+			s--;
+		}
+		if (name[0] == 0) /* Bogus string reference */
+			continue;
+
+		dmi_check_onboard_device(type, name, adap);
+	}
+}
+
+/* Register optional slaves */
+static void __devinit i801_probe_optional_slaves(struct i801_priv *priv)
+{
+	/* Only register slaves on main SMBus channel */
+	if (priv->features & FEATURE_IDF)
+		return;
+
+	if (apanel_addr) {
+		struct i2c_board_info info;
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		info.addr = apanel_addr;
+		strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
+		i2c_new_device(&priv->adapter, &info);
+	}
+
+	if (dmi_name_in_vendors("FUJITSU"))
+		dmi_walk(dmi_check_onboard_devices, &priv->adapter);
+}
+#else
+static void __init input_apanel_init(void) {}
+static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {}
+#endif	/* CONFIG_X86 && CONFIG_DMI */
+
+static int __devinit i801_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
+{
+	unsigned char temp;
+	int err, i;
+	struct i801_priv *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	i2c_set_adapdata(&priv->adapter, priv);
+	priv->adapter.owner = THIS_MODULE;
+	priv->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+	priv->adapter.algo = &smbus_algorithm;
+
+	priv->pci_dev = dev;
+	switch (dev->device) {
+	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
+	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
+	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
+		priv->features |= FEATURE_IDF;
+		/* fall through */
+	default:
+		priv->features |= FEATURE_I2C_BLOCK_READ;
+		/* fall through */
+	case PCI_DEVICE_ID_INTEL_82801DB_3:
+		priv->features |= FEATURE_SMBUS_PEC;
+		priv->features |= FEATURE_BLOCK_BUFFER;
+		/* fall through */
+	case PCI_DEVICE_ID_INTEL_82801CA_3:
+	case PCI_DEVICE_ID_INTEL_82801BA_2:
+	case PCI_DEVICE_ID_INTEL_82801AB_3:
+	case PCI_DEVICE_ID_INTEL_82801AA_3:
+		break;
+	}
+
+	/* Disable features on user request */
+	for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
+		if (priv->features & disable_features & (1 << i))
+			dev_notice(&dev->dev, "%s disabled by user\n",
+				   i801_feature_names[i]);
+	}
+	priv->features &= ~disable_features;
+
+	err = pci_enable_device(dev);
+	if (err) {
+		dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
+			err);
+		goto exit;
+	}
+
+	/* Determine the address of the SMBus area */
+	priv->smba = pci_resource_start(dev, SMBBAR);
+	if (!priv->smba) {
+		dev_err(&dev->dev, "SMBus base address uninitialized, "
+			"upgrade BIOS\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+	err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
+	if (err) {
+		err = -ENODEV;
+		goto exit;
+	}
+
+	err = pci_request_region(dev, SMBBAR, i801_driver.name);
+	if (err) {
+		dev_err(&dev->dev, "Failed to request SMBus region "
+			"0x%lx-0x%Lx\n", priv->smba,
+			(unsigned long long)pci_resource_end(dev, SMBBAR));
+		goto exit;
+	}
+
+	pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
+	priv->original_hstcfg = temp;
+	temp &= ~SMBHSTCFG_I2C_EN;	/* SMBus timing */
+	if (!(temp & SMBHSTCFG_HST_EN)) {
+		dev_info(&dev->dev, "Enabling SMBus device\n");
+		temp |= SMBHSTCFG_HST_EN;
+	}
+	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
+
+	if (temp & SMBHSTCFG_SMB_SMI_EN)
+		dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
+	else
+		dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");
+
+	/* Clear special mode bits */
+	if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
+		outb_p(inb_p(SMBAUXCTL(priv)) &
+		       ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+
+	/* set up the sysfs linkage to our parent device */
+	priv->adapter.dev.parent = &dev->dev;
+
+	/* Retry up to 3 times on lost arbitration */
+	priv->adapter.retries = 3;
+
+	snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+		"SMBus I801 adapter at %04lx", priv->smba);
+	err = i2c_add_adapter(&priv->adapter);
+	if (err) {
+		dev_err(&dev->dev, "Failed to add SMBus adapter\n");
+		goto exit_release;
+	}
+
+	i801_probe_optional_slaves(priv);
+
+	pci_set_drvdata(dev, priv);
+	return 0;
+
+exit_release:
+	pci_release_region(dev, SMBBAR);
+exit:
+	kfree(priv);
+	return err;
+}
+
+static void __devexit i801_remove(struct pci_dev *dev)
+{
+	struct i801_priv *priv = pci_get_drvdata(dev);
+
+	i2c_del_adapter(&priv->adapter);
+	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+	pci_release_region(dev, SMBBAR);
+	pci_set_drvdata(dev, NULL);
+	kfree(priv);
+	/*
+	 * do not call pci_disable_device(dev) since it can cause hard hangs on
+	 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
+	 */
+}
+
+#ifdef CONFIG_PM
+static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
+{
+	struct i801_priv *priv = pci_get_drvdata(dev);
+
+	pci_save_state(dev);
+	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+	pci_set_power_state(dev, pci_choose_state(dev, mesg));
+	return 0;
+}
+
+static int i801_resume(struct pci_dev *dev)
+{
+	pci_set_power_state(dev, PCI_D0);
+	pci_restore_state(dev);
+	return pci_enable_device(dev);
+}
+#else
+#define i801_suspend NULL
+#define i801_resume NULL
+#endif
+
+static struct pci_driver i801_driver = {
+	.name		= "i801_smbus",
+	.id_table	= i801_ids,
+	.probe		= i801_probe,
+	.remove		= __devexit_p(i801_remove),
+	.suspend	= i801_suspend,
+	.resume		= i801_resume,
+};
+
+static int __init i2c_i801_init(void)
+{
+	if (dmi_name_in_vendors("FUJITSU"))
+		input_apanel_init();
+	return pci_register_driver(&i801_driver);
+}
+
+static void __exit i2c_i801_exit(void)
+{
+	pci_unregister_driver(&i801_driver);
+}
+
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, "
+	      "Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("I801 SMBus driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_i801_init);
+module_exit(i2c_i801_exit);