Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

45 files changed, 51054 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
new file mode 100644
index 00000000..ce7fc776
--- /dev/null
+++ b/drivers/gpu/drm/i915/Makefile
@@ -0,0 +1,45 @@
+#
+# Makefile for the drm device driver.  This driver provides support for the
+# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
+
+ccflags-y := -Iinclude/drm
+i915-y := i915_drv.o i915_dma.o i915_irq.o \
+	  i915_debugfs.o \
+          i915_suspend.o \
+	  i915_gem.o \
+	  i915_gem_debug.o \
+	  i915_gem_evict.o \
+	  i915_gem_execbuffer.o \
+	  i915_gem_gtt.o \
+	  i915_gem_tiling.o \
+	  i915_trace_points.o \
+	  intel_display.o \
+	  intel_crt.o \
+	  intel_lvds.o \
+	  intel_bios.o \
+	  intel_dp.o \
+	  intel_hdmi.o \
+	  intel_sdvo.o \
+	  intel_modes.o \
+	  intel_panel.o \
+	  intel_i2c.o \
+	  intel_fb.o \
+	  intel_tv.o \
+	  intel_dvo.o \
+	  intel_ringbuffer.o \
+	  intel_overlay.o \
+	  intel_sprite.o \
+	  intel_opregion.o \
+	  dvo_ch7xxx.o \
+	  dvo_ch7017.o \
+	  dvo_ivch.o \
+	  dvo_tfp410.o \
+	  dvo_sil164.o
+
+i915-$(CONFIG_COMPAT)   += i915_ioc32.o
+
+i915-$(CONFIG_ACPI)	+= intel_acpi.o
+
+obj-$(CONFIG_DRM_I915)  += i915.o
+
+CFLAGS_i915_trace_points.o := -I$(src)
diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h
new file mode 100644
index 00000000..8c2ad014
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright © 2006 Eric Anholt
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _INTEL_DVO_H
+#define _INTEL_DVO_H
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "intel_drv.h"
+
+struct intel_dvo_device {
+	const char *name;
+	int type;
+	/* DVOA/B/C output register */
+	u32 dvo_reg;
+	/* GPIO register used for i2c bus to control this device */
+	u32 gpio;
+	int slave_addr;
+
+	const struct intel_dvo_dev_ops *dev_ops;
+	void *dev_priv;
+	struct i2c_adapter *i2c_bus;
+};
+
+struct intel_dvo_dev_ops {
+	/*
+	 * Initialize the device at startup time.
+	 * Returns NULL if the device does not exist.
+	 */
+	bool (*init)(struct intel_dvo_device *dvo,
+		     struct i2c_adapter *i2cbus);
+
+	/*
+	 * Called to allow the output a chance to create properties after the
+	 * RandR objects have been created.
+	 */
+	void (*create_resources)(struct intel_dvo_device *dvo);
+
+	/*
+	 * Turn on/off output or set intermediate power levels if available.
+	 *
+	 * Unsupported intermediate modes drop to the lower power setting.
+	 * If the  mode is DPMSModeOff, the output must be disabled,
+	 * as the DPLL may be disabled afterwards.
+	 */
+	void (*dpms)(struct intel_dvo_device *dvo, int mode);
+
+	/*
+	 * Callback for testing a video mode for a given output.
+	 *
+	 * This function should only check for cases where a mode can't
+	 * be supported on the output specifically, and not represent
+	 * generic CRTC limitations.
+	 *
+	 * \return MODE_OK if the mode is valid, or another MODE_* otherwise.
+	 */
+	int (*mode_valid)(struct intel_dvo_device *dvo,
+			  struct drm_display_mode *mode);
+
+	/*
+	 * Callback to adjust the mode to be set in the CRTC.
+	 *
+	 * This allows an output to adjust the clock or even the entire set of
+	 * timings, which is used for panels with fixed timings or for
+	 * buses with clock limitations.
+	 */
+	bool (*mode_fixup)(struct intel_dvo_device *dvo,
+			   struct drm_display_mode *mode,
+			   struct drm_display_mode *adjusted_mode);
+
+	/*
+	 * Callback for preparing mode changes on an output
+	 */
+	void (*prepare)(struct intel_dvo_device *dvo);
+
+	/*
+	 * Callback for committing mode changes on an output
+	 */
+	void (*commit)(struct intel_dvo_device *dvo);
+
+	/*
+	 * Callback for setting up a video mode after fixups have been made.
+	 *
+	 * This is only called while the output is disabled.  The dpms callback
+	 * must be all that's necessary for the output, to turn the output on
+	 * after this function is called.
+	 */
+	void (*mode_set)(struct intel_dvo_device *dvo,
+			 struct drm_display_mode *mode,
+			 struct drm_display_mode *adjusted_mode);
+
+	/*
+	 * Probe for a connected output, and return detect_status.
+	 */
+	enum drm_connector_status (*detect)(struct intel_dvo_device *dvo);
+
+	/**
+	 * Query the device for the modes it provides.
+	 *
+	 * This function may also update MonInfo, mm_width, and mm_height.
+	 *
+	 * \return singly-linked list of modes or NULL if no modes found.
+	 */
+	struct drm_display_mode *(*get_modes)(struct intel_dvo_device *dvo);
+
+	/**
+	 * Clean up driver-specific bits of the output
+	 */
+	void (*destroy) (struct intel_dvo_device *dvo);
+
+	/**
+	 * Debugging hook to dump device registers to log file
+	 */
+	void (*dump_regs)(struct intel_dvo_device *dvo);
+};
+
+extern struct intel_dvo_dev_ops sil164_ops;
+extern struct intel_dvo_dev_ops ch7xxx_ops;
+extern struct intel_dvo_dev_ops ivch_ops;
+extern struct intel_dvo_dev_ops tfp410_ops;
+extern struct intel_dvo_dev_ops ch7017_ops;
+
+#endif /* _INTEL_DVO_H */
diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c
new file mode 100644
index 00000000..1ca799a1
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo_ch7017.c
@@ -0,0 +1,401 @@
+/*
+ * Copyright © 2006 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#include "dvo.h"
+
+#define CH7017_TV_DISPLAY_MODE		0x00
+#define CH7017_FLICKER_FILTER		0x01
+#define CH7017_VIDEO_BANDWIDTH		0x02
+#define CH7017_TEXT_ENHANCEMENT		0x03
+#define CH7017_START_ACTIVE_VIDEO	0x04
+#define CH7017_HORIZONTAL_POSITION	0x05
+#define CH7017_VERTICAL_POSITION	0x06
+#define CH7017_BLACK_LEVEL		0x07
+#define CH7017_CONTRAST_ENHANCEMENT	0x08
+#define CH7017_TV_PLL			0x09
+#define CH7017_TV_PLL_M			0x0a
+#define CH7017_TV_PLL_N			0x0b
+#define CH7017_SUB_CARRIER_0		0x0c
+#define CH7017_CIV_CONTROL		0x10
+#define CH7017_CIV_0			0x11
+#define CH7017_CHROMA_BOOST		0x14
+#define CH7017_CLOCK_MODE		0x1c
+#define CH7017_INPUT_CLOCK		0x1d
+#define CH7017_GPIO_CONTROL		0x1e
+#define CH7017_INPUT_DATA_FORMAT	0x1f
+#define CH7017_CONNECTION_DETECT	0x20
+#define CH7017_DAC_CONTROL		0x21
+#define CH7017_BUFFERED_CLOCK_OUTPUT	0x22
+#define CH7017_DEFEAT_VSYNC		0x47
+#define CH7017_TEST_PATTERN		0x48
+
+#define CH7017_POWER_MANAGEMENT		0x49
+/** Enables the TV output path. */
+#define CH7017_TV_EN			(1 << 0)
+#define CH7017_DAC0_POWER_DOWN		(1 << 1)
+#define CH7017_DAC1_POWER_DOWN		(1 << 2)
+#define CH7017_DAC2_POWER_DOWN		(1 << 3)
+#define CH7017_DAC3_POWER_DOWN		(1 << 4)
+/** Powers down the TV out block, and DAC0-3 */
+#define CH7017_TV_POWER_DOWN_EN		(1 << 5)
+
+#define CH7017_VERSION_ID		0x4a
+
+#define CH7017_DEVICE_ID		0x4b
+#define CH7017_DEVICE_ID_VALUE		0x1b
+#define CH7018_DEVICE_ID_VALUE		0x1a
+#define CH7019_DEVICE_ID_VALUE		0x19
+
+#define CH7017_XCLK_D2_ADJUST		0x53
+#define CH7017_UP_SCALER_COEFF_0	0x55
+#define CH7017_UP_SCALER_COEFF_1	0x56
+#define CH7017_UP_SCALER_COEFF_2	0x57
+#define CH7017_UP_SCALER_COEFF_3	0x58
+#define CH7017_UP_SCALER_COEFF_4	0x59
+#define CH7017_UP_SCALER_VERTICAL_INC_0	0x5a
+#define CH7017_UP_SCALER_VERTICAL_INC_1	0x5b
+#define CH7017_GPIO_INVERT		0x5c
+#define CH7017_UP_SCALER_HORIZONTAL_INC_0	0x5d
+#define CH7017_UP_SCALER_HORIZONTAL_INC_1	0x5e
+
+#define CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT	0x5f
+/**< Low bits of horizontal active pixel input */
+
+#define CH7017_ACTIVE_INPUT_LINE_OUTPUT	0x60
+/** High bits of horizontal active pixel input */
+#define CH7017_LVDS_HAP_INPUT_MASK	(0x7 << 0)
+/** High bits of vertical active line output */
+#define CH7017_LVDS_VAL_HIGH_MASK	(0x7 << 3)
+
+#define CH7017_VERTICAL_ACTIVE_LINE_OUTPUT	0x61
+/**< Low bits of vertical active line output */
+
+#define CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT	0x62
+/**< Low bits of horizontal active pixel output */
+
+#define CH7017_LVDS_POWER_DOWN		0x63
+/** High bits of horizontal active pixel output */
+#define CH7017_LVDS_HAP_HIGH_MASK	(0x7 << 0)
+/** Enables the LVDS power down state transition */
+#define CH7017_LVDS_POWER_DOWN_EN	(1 << 6)
+/** Enables the LVDS upscaler */
+#define CH7017_LVDS_UPSCALER_EN		(1 << 7)
+#define CH7017_LVDS_POWER_DOWN_DEFAULT_RESERVED 0x08
+
+#define CH7017_LVDS_ENCODING		0x64
+#define CH7017_LVDS_DITHER_2D		(1 << 2)
+#define CH7017_LVDS_DITHER_DIS		(1 << 3)
+#define CH7017_LVDS_DUAL_CHANNEL_EN	(1 << 4)
+#define CH7017_LVDS_24_BIT		(1 << 5)
+
+#define CH7017_LVDS_ENCODING_2		0x65
+
+#define CH7017_LVDS_PLL_CONTROL		0x66
+/** Enables the LVDS panel output path */
+#define CH7017_LVDS_PANEN		(1 << 0)
+/** Enables the LVDS panel backlight */
+#define CH7017_LVDS_BKLEN		(1 << 3)
+
+#define CH7017_POWER_SEQUENCING_T1	0x67
+#define CH7017_POWER_SEQUENCING_T2	0x68
+#define CH7017_POWER_SEQUENCING_T3	0x69
+#define CH7017_POWER_SEQUENCING_T4	0x6a
+#define CH7017_POWER_SEQUENCING_T5	0x6b
+#define CH7017_GPIO_DRIVER_TYPE		0x6c
+#define CH7017_GPIO_DATA		0x6d
+#define CH7017_GPIO_DIRECTION_CONTROL	0x6e
+
+#define CH7017_LVDS_PLL_FEEDBACK_DIV	0x71
+# define CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT 4
+# define CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT 0
+# define CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED 0x80
+
+#define CH7017_LVDS_PLL_VCO_CONTROL	0x72
+# define CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED 0x80
+# define CH7017_LVDS_PLL_VCO_SHIFT	4
+# define CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT 0
+
+#define CH7017_OUTPUTS_ENABLE		0x73
+# define CH7017_CHARGE_PUMP_LOW		0x0
+# define CH7017_CHARGE_PUMP_HIGH	0x3
+# define CH7017_LVDS_CHANNEL_A		(1 << 3)
+# define CH7017_LVDS_CHANNEL_B		(1 << 4)
+# define CH7017_TV_DAC_A		(1 << 5)
+# define CH7017_TV_DAC_B		(1 << 6)
+# define CH7017_DDC_SELECT_DC2		(1 << 7)
+
+#define CH7017_LVDS_OUTPUT_AMPLITUDE	0x74
+#define CH7017_LVDS_PLL_EMI_REDUCTION	0x75
+#define CH7017_LVDS_POWER_DOWN_FLICKER	0x76
+
+#define CH7017_LVDS_CONTROL_2		0x78
+# define CH7017_LOOP_FILTER_SHIFT	5
+# define CH7017_PHASE_DETECTOR_SHIFT	0
+
+#define CH7017_BANG_LIMIT_CONTROL	0x7f
+
+struct ch7017_priv {
+	uint8_t dummy;
+};
+
+static void ch7017_dump_regs(struct intel_dvo_device *dvo);
+static void ch7017_dpms(struct intel_dvo_device *dvo, int mode);
+
+static bool ch7017_read(struct intel_dvo_device *dvo, u8 addr, u8 *val)
+{
+	struct i2c_msg msgs[] = {
+		{
+			.addr = dvo->slave_addr,
+			.flags = 0,
+			.len = 1,
+			.buf = &addr,
+		},
+		{
+			.addr = dvo->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = val,
+		}
+	};
+	return i2c_transfer(dvo->i2c_bus, msgs, 2) == 2;
+}
+
+static bool ch7017_write(struct intel_dvo_device *dvo, u8 addr, u8 val)
+{
+	uint8_t buf[2] = { addr, val };
+	struct i2c_msg msg = {
+		.addr = dvo->slave_addr,
+		.flags = 0,
+		.len = 2,
+		.buf = buf,
+	};
+	return i2c_transfer(dvo->i2c_bus, &msg, 1) == 1;
+}
+
+/** Probes for a CH7017 on the given bus and slave address. */
+static bool ch7017_init(struct intel_dvo_device *dvo,
+			struct i2c_adapter *adapter)
+{
+	struct ch7017_priv *priv;
+	const char *str;
+	u8 val;
+
+	priv = kzalloc(sizeof(struct ch7017_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return false;
+
+	dvo->i2c_bus = adapter;
+	dvo->dev_priv = priv;
+
+	if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val))
+		goto fail;
+
+	switch (val) {
+	case CH7017_DEVICE_ID_VALUE:
+		str = "ch7017";
+		break;
+	case CH7018_DEVICE_ID_VALUE:
+		str = "ch7018";
+		break;
+	case CH7019_DEVICE_ID_VALUE:
+		str = "ch7019";
+		break;
+	default:
+		DRM_DEBUG_KMS("ch701x not detected, got %d: from %s "
+			      "slave %d.\n",
+			      val, adapter->name, dvo->slave_addr);
+		goto fail;
+	}
+
+	DRM_DEBUG_KMS("%s detected on %s, addr %d\n",
+		      str, adapter->name, dvo->slave_addr);
+	return true;
+
+fail:
+	kfree(priv);
+	return false;
+}
+
+static enum drm_connector_status ch7017_detect(struct intel_dvo_device *dvo)
+{
+	return connector_status_connected;
+}
+
+static enum drm_mode_status ch7017_mode_valid(struct intel_dvo_device *dvo,
+					      struct drm_display_mode *mode)
+{
+	if (mode->clock > 160000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void ch7017_mode_set(struct intel_dvo_device *dvo,
+			    struct drm_display_mode *mode,
+			    struct drm_display_mode *adjusted_mode)
+{
+	uint8_t lvds_pll_feedback_div, lvds_pll_vco_control;
+	uint8_t outputs_enable, lvds_control_2, lvds_power_down;
+	uint8_t horizontal_active_pixel_input;
+	uint8_t horizontal_active_pixel_output, vertical_active_line_output;
+	uint8_t active_input_line_output;
+
+	DRM_DEBUG_KMS("Registers before mode setting\n");
+	ch7017_dump_regs(dvo);
+
+	/* LVDS PLL settings from page 75 of 7017-7017ds.pdf*/
+	if (mode->clock < 100000) {
+		outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_LOW;
+		lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED |
+			(2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) |
+			(13 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT);
+		lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED |
+			(2 << CH7017_LVDS_PLL_VCO_SHIFT) |
+			(3 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT);
+		lvds_control_2 = (1 << CH7017_LOOP_FILTER_SHIFT) |
+			(0 << CH7017_PHASE_DETECTOR_SHIFT);
+	} else {
+		outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_HIGH;
+		lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED |
+			(2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) |
+			(3 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT);
+		lvds_pll_feedback_div = 35;
+		lvds_control_2 = (3 << CH7017_LOOP_FILTER_SHIFT) |
+			(0 << CH7017_PHASE_DETECTOR_SHIFT);
+		if (1) { /* XXX: dual channel panel detection.  Assume yes for now. */
+			outputs_enable |= CH7017_LVDS_CHANNEL_B;
+			lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED |
+				(2 << CH7017_LVDS_PLL_VCO_SHIFT) |
+				(13 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT);
+		} else {
+			lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED |
+				(1 << CH7017_LVDS_PLL_VCO_SHIFT) |
+				(13 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT);
+		}
+	}
+
+	horizontal_active_pixel_input = mode->hdisplay & 0x00ff;
+
+	vertical_active_line_output = mode->vdisplay & 0x00ff;
+	horizontal_active_pixel_output = mode->hdisplay & 0x00ff;
+
+	active_input_line_output = ((mode->hdisplay & 0x0700) >> 8) |
+				   (((mode->vdisplay & 0x0700) >> 8) << 3);
+
+	lvds_power_down = CH7017_LVDS_POWER_DOWN_DEFAULT_RESERVED |
+			  (mode->hdisplay & 0x0700) >> 8;
+
+	ch7017_dpms(dvo, DRM_MODE_DPMS_OFF);
+	ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT,
+			horizontal_active_pixel_input);
+	ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT,
+			horizontal_active_pixel_output);
+	ch7017_write(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT,
+			vertical_active_line_output);
+	ch7017_write(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT,
+			active_input_line_output);
+	ch7017_write(dvo, CH7017_LVDS_PLL_VCO_CONTROL, lvds_pll_vco_control);
+	ch7017_write(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, lvds_pll_feedback_div);
+	ch7017_write(dvo, CH7017_LVDS_CONTROL_2, lvds_control_2);
+	ch7017_write(dvo, CH7017_OUTPUTS_ENABLE, outputs_enable);
+
+	/* Turn the LVDS back on with new settings. */
+	ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, lvds_power_down);
+
+	DRM_DEBUG_KMS("Registers after mode setting\n");
+	ch7017_dump_regs(dvo);
+}
+
+/* set the CH7017 power state */
+static void ch7017_dpms(struct intel_dvo_device *dvo, int mode)
+{
+	uint8_t val;
+
+	ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &val);
+
+	/* Turn off TV/VGA, and never turn it on since we don't support it. */
+	ch7017_write(dvo, CH7017_POWER_MANAGEMENT,
+			CH7017_DAC0_POWER_DOWN |
+			CH7017_DAC1_POWER_DOWN |
+			CH7017_DAC2_POWER_DOWN |
+			CH7017_DAC3_POWER_DOWN |
+			CH7017_TV_POWER_DOWN_EN);
+
+	if (mode == DRM_MODE_DPMS_ON) {
+		/* Turn on the LVDS */
+		ch7017_write(dvo, CH7017_LVDS_POWER_DOWN,
+			     val & ~CH7017_LVDS_POWER_DOWN_EN);
+	} else {
+		/* Turn off the LVDS */
+		ch7017_write(dvo, CH7017_LVDS_POWER_DOWN,
+			     val | CH7017_LVDS_POWER_DOWN_EN);
+	}
+
+	/* XXX: Should actually wait for update power status somehow */
+	msleep(20);
+}
+
+static void ch7017_dump_regs(struct intel_dvo_device *dvo)
+{
+	uint8_t val;
+
+#define DUMP(reg)					\
+do {							\
+	ch7017_read(dvo, reg, &val);			\
+	DRM_DEBUG_KMS(#reg ": %02x\n", val);		\
+} while (0)
+
+	DUMP(CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT);
+	DUMP(CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT);
+	DUMP(CH7017_VERTICAL_ACTIVE_LINE_OUTPUT);
+	DUMP(CH7017_ACTIVE_INPUT_LINE_OUTPUT);
+	DUMP(CH7017_LVDS_PLL_VCO_CONTROL);
+	DUMP(CH7017_LVDS_PLL_FEEDBACK_DIV);
+	DUMP(CH7017_LVDS_CONTROL_2);
+	DUMP(CH7017_OUTPUTS_ENABLE);
+	DUMP(CH7017_LVDS_POWER_DOWN);
+}
+
+static void ch7017_destroy(struct intel_dvo_device *dvo)
+{
+	struct ch7017_priv *priv = dvo->dev_priv;
+
+	if (priv) {
+		kfree(priv);
+		dvo->dev_priv = NULL;
+	}
+}
+
+struct intel_dvo_dev_ops ch7017_ops = {
+	.init = ch7017_init,
+	.detect = ch7017_detect,
+	.mode_valid = ch7017_mode_valid,
+	.mode_set = ch7017_mode_set,
+	.dpms = ch7017_dpms,
+	.dump_regs = ch7017_dump_regs,
+	.destroy = ch7017_destroy,
+};
diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c
new file mode 100644
index 00000000..4a036600
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c
@@ -0,0 +1,331 @@
+/**************************************************************************
+
+Copyright © 2006 Dave Airlie
+
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sub license, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice (including the
+next paragraph) shall be included in all copies or substantial portions
+of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+**************************************************************************/
+
+#include "dvo.h"
+
+#define CH7xxx_REG_VID		0x4a
+#define CH7xxx_REG_DID		0x4b
+
+#define CH7011_VID		0x83 /* 7010 as well */
+#define CH7009A_VID		0x84
+#define CH7009B_VID		0x85
+#define CH7301_VID		0x95
+
+#define CH7xxx_VID		0x84
+#define CH7xxx_DID		0x17
+
+#define CH7xxx_NUM_REGS		0x4c
+
+#define CH7xxx_CM		0x1c
+#define CH7xxx_CM_XCM		(1<<0)
+#define CH7xxx_CM_MCP		(1<<2)
+#define CH7xxx_INPUT_CLOCK	0x1d
+#define CH7xxx_GPIO		0x1e
+#define CH7xxx_GPIO_HPIR	(1<<3)
+#define CH7xxx_IDF		0x1f
+
+#define CH7xxx_IDF_HSP		(1<<3)
+#define CH7xxx_IDF_VSP		(1<<4)
+
+#define CH7xxx_CONNECTION_DETECT 0x20
+#define CH7xxx_CDET_DVI		(1<<5)
+
+#define CH7301_DAC_CNTL		0x21
+#define CH7301_HOTPLUG		0x23
+#define CH7xxx_TCTL		0x31
+#define CH7xxx_TVCO		0x32
+#define CH7xxx_TPCP		0x33
+#define CH7xxx_TPD		0x34
+#define CH7xxx_TPVT		0x35
+#define CH7xxx_TLPF		0x36
+#define CH7xxx_TCT		0x37
+#define CH7301_TEST_PATTERN	0x48
+
+#define CH7xxx_PM		0x49
+#define CH7xxx_PM_FPD		(1<<0)
+#define CH7301_PM_DACPD0	(1<<1)
+#define CH7301_PM_DACPD1	(1<<2)
+#define CH7301_PM_DACPD2	(1<<3)
+#define CH7xxx_PM_DVIL		(1<<6)
+#define CH7xxx_PM_DVIP		(1<<7)
+
+#define CH7301_SYNC_POLARITY	0x56
+#define CH7301_SYNC_RGB_YUV	(1<<0)
+#define CH7301_SYNC_POL_DVI	(1<<5)
+
+/** @file
+ * driver for the Chrontel 7xxx DVI chip over DVO.
+ */
+
+static struct ch7xxx_id_struct {
+	uint8_t vid;
+	char *name;
+} ch7xxx_ids[] = {
+	{ CH7011_VID, "CH7011" },
+	{ CH7009A_VID, "CH7009A" },
+	{ CH7009B_VID, "CH7009B" },
+	{ CH7301_VID, "CH7301" },
+};
+
+struct ch7xxx_priv {
+	bool quiet;
+};
+
+static char *ch7xxx_get_id(uint8_t vid)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ch7xxx_ids); i++) {
+		if (ch7xxx_ids[i].vid == vid)
+			return ch7xxx_ids[i].name;
+	}
+
+	return NULL;
+}
+
+/** Reads an 8 bit register */
+static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
+{
+	struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	u8 out_buf[2];
+	u8 in_buf[2];
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = dvo->slave_addr,
+			.flags = 0,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = dvo->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = in_buf,
+		}
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = 0;
+
+	if (i2c_transfer(adapter, msgs, 2) == 2) {
+		*ch = in_buf[0];
+		return true;
+	};
+
+	if (!ch7xxx->quiet) {
+		DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n",
+			  addr, adapter->name, dvo->slave_addr);
+	}
+	return false;
+}
+
+/** Writes an 8 bit register */
+static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
+{
+	struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	uint8_t out_buf[2];
+	struct i2c_msg msg = {
+		.addr = dvo->slave_addr,
+		.flags = 0,
+		.len = 2,
+		.buf = out_buf,
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = ch;
+
+	if (i2c_transfer(adapter, &msg, 1) == 1)
+		return true;
+
+	if (!ch7xxx->quiet) {
+		DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
+			  addr, adapter->name, dvo->slave_addr);
+	}
+
+	return false;
+}
+
+static bool ch7xxx_init(struct intel_dvo_device *dvo,
+			struct i2c_adapter *adapter)
+{
+	/* this will detect the CH7xxx chip on the specified i2c bus */
+	struct ch7xxx_priv *ch7xxx;
+	uint8_t vendor, device;
+	char *name;
+
+	ch7xxx = kzalloc(sizeof(struct ch7xxx_priv), GFP_KERNEL);
+	if (ch7xxx == NULL)
+		return false;
+
+	dvo->i2c_bus = adapter;
+	dvo->dev_priv = ch7xxx;
+	ch7xxx->quiet = true;
+
+	if (!ch7xxx_readb(dvo, CH7xxx_REG_VID, &vendor))
+		goto out;
+
+	name = ch7xxx_get_id(vendor);
+	if (!name) {
+		DRM_DEBUG_KMS("ch7xxx not detected; got 0x%02x from %s "
+				"slave %d.\n",
+			  vendor, adapter->name, dvo->slave_addr);
+		goto out;
+	}
+
+
+	if (!ch7xxx_readb(dvo, CH7xxx_REG_DID, &device))
+		goto out;
+
+	if (device != CH7xxx_DID) {
+		DRM_DEBUG_KMS("ch7xxx not detected; got 0x%02x from %s "
+				"slave %d.\n",
+			  vendor, adapter->name, dvo->slave_addr);
+		goto out;
+	}
+
+	ch7xxx->quiet = false;
+	DRM_DEBUG_KMS("Detected %s chipset, vendor/device ID 0x%02x/0x%02x\n",
+		  name, vendor, device);
+	return true;
+out:
+	kfree(ch7xxx);
+	return false;
+}
+
+static enum drm_connector_status ch7xxx_detect(struct intel_dvo_device *dvo)
+{
+	uint8_t cdet, orig_pm, pm;
+
+	ch7xxx_readb(dvo, CH7xxx_PM, &orig_pm);
+
+	pm = orig_pm;
+	pm &= ~CH7xxx_PM_FPD;
+	pm |= CH7xxx_PM_DVIL | CH7xxx_PM_DVIP;
+
+	ch7xxx_writeb(dvo, CH7xxx_PM, pm);
+
+	ch7xxx_readb(dvo, CH7xxx_CONNECTION_DETECT, &cdet);
+
+	ch7xxx_writeb(dvo, CH7xxx_PM, orig_pm);
+
+	if (cdet & CH7xxx_CDET_DVI)
+		return connector_status_connected;
+	return connector_status_disconnected;
+}
+
+static enum drm_mode_status ch7xxx_mode_valid(struct intel_dvo_device *dvo,
+					      struct drm_display_mode *mode)
+{
+	if (mode->clock > 165000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void ch7xxx_mode_set(struct intel_dvo_device *dvo,
+			    struct drm_display_mode *mode,
+			    struct drm_display_mode *adjusted_mode)
+{
+	uint8_t tvco, tpcp, tpd, tlpf, idf;
+
+	if (mode->clock <= 65000) {
+		tvco = 0x23;
+		tpcp = 0x08;
+		tpd = 0x16;
+		tlpf = 0x60;
+	} else {
+		tvco = 0x2d;
+		tpcp = 0x06;
+		tpd = 0x26;
+		tlpf = 0xa0;
+	}
+
+	ch7xxx_writeb(dvo, CH7xxx_TCTL, 0x00);
+	ch7xxx_writeb(dvo, CH7xxx_TVCO, tvco);
+	ch7xxx_writeb(dvo, CH7xxx_TPCP, tpcp);
+	ch7xxx_writeb(dvo, CH7xxx_TPD, tpd);
+	ch7xxx_writeb(dvo, CH7xxx_TPVT, 0x30);
+	ch7xxx_writeb(dvo, CH7xxx_TLPF, tlpf);
+	ch7xxx_writeb(dvo, CH7xxx_TCT, 0x00);
+
+	ch7xxx_readb(dvo, CH7xxx_IDF, &idf);
+
+	idf &= ~(CH7xxx_IDF_HSP | CH7xxx_IDF_VSP);
+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+		idf |= CH7xxx_IDF_HSP;
+
+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+		idf |= CH7xxx_IDF_HSP;
+
+	ch7xxx_writeb(dvo, CH7xxx_IDF, idf);
+}
+
+/* set the CH7xxx power state */
+static void ch7xxx_dpms(struct intel_dvo_device *dvo, int mode)
+{
+	if (mode == DRM_MODE_DPMS_ON)
+		ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_DVIL | CH7xxx_PM_DVIP);
+	else
+		ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_FPD);
+}
+
+static void ch7xxx_dump_regs(struct intel_dvo_device *dvo)
+{
+	int i;
+
+	for (i = 0; i < CH7xxx_NUM_REGS; i++) {
+		uint8_t val;
+		if ((i % 8) == 0)
+			DRM_LOG_KMS("\n %02X: ", i);
+		ch7xxx_readb(dvo, i, &val);
+		DRM_LOG_KMS("%02X ", val);
+	}
+}
+
+static void ch7xxx_destroy(struct intel_dvo_device *dvo)
+{
+	struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
+
+	if (ch7xxx) {
+		kfree(ch7xxx);
+		dvo->dev_priv = NULL;
+	}
+}
+
+struct intel_dvo_dev_ops ch7xxx_ops = {
+	.init = ch7xxx_init,
+	.detect = ch7xxx_detect,
+	.mode_valid = ch7xxx_mode_valid,
+	.mode_set = ch7xxx_mode_set,
+	.dpms = ch7xxx_dpms,
+	.dump_regs = ch7xxx_dump_regs,
+	.destroy = ch7xxx_destroy,
+};
diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c
new file mode 100644
index 00000000..04f2893d
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo_ivch.c
@@ -0,0 +1,421 @@
+/*
+ * Copyright © 2006 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#include "dvo.h"
+
+/*
+ * register definitions for the i82807aa.
+ *
+ * Documentation on this chipset can be found in datasheet #29069001 at
+ * intel.com.
+ */
+
+/*
+ * VCH Revision & GMBus Base Addr
+ */
+#define VR00		0x00
+# define VR00_BASE_ADDRESS_MASK		0x007f
+
+/*
+ * Functionality Enable
+ */
+#define VR01		0x01
+
+/*
+ * Enable the panel fitter
+ */
+# define VR01_PANEL_FIT_ENABLE		(1 << 3)
+/*
+ * Enables the LCD display.
+ *
+ * This must not be set while VR01_DVO_BYPASS_ENABLE is set.
+ */
+# define VR01_LCD_ENABLE		(1 << 2)
+/** Enables the DVO repeater. */
+# define VR01_DVO_BYPASS_ENABLE		(1 << 1)
+/** Enables the DVO clock */
+# define VR01_DVO_ENABLE		(1 << 0)
+
+/*
+ * LCD Interface Format
+ */
+#define VR10		0x10
+/** Enables LVDS output instead of CMOS */
+# define VR10_LVDS_ENABLE		(1 << 4)
+/** Enables 18-bit LVDS output. */
+# define VR10_INTERFACE_1X18		(0 << 2)
+/** Enables 24-bit LVDS or CMOS output */
+# define VR10_INTERFACE_1X24		(1 << 2)
+/** Enables 2x18-bit LVDS or CMOS output. */
+# define VR10_INTERFACE_2X18		(2 << 2)
+/** Enables 2x24-bit LVDS output */
+# define VR10_INTERFACE_2X24		(3 << 2)
+
+/*
+ * VR20 LCD Horizontal Display Size
+ */
+#define VR20	0x20
+
+/*
+ * LCD Vertical Display Size
+ */
+#define VR21	0x20
+
+/*
+ * Panel power down status
+ */
+#define VR30		0x30
+/** Read only bit indicating that the panel is not in a safe poweroff state. */
+# define VR30_PANEL_ON			(1 << 15)
+
+#define VR40		0x40
+# define VR40_STALL_ENABLE		(1 << 13)
+# define VR40_VERTICAL_INTERP_ENABLE	(1 << 12)
+# define VR40_ENHANCED_PANEL_FITTING	(1 << 11)
+# define VR40_HORIZONTAL_INTERP_ENABLE	(1 << 10)
+# define VR40_AUTO_RATIO_ENABLE		(1 << 9)
+# define VR40_CLOCK_GATING_ENABLE	(1 << 8)
+
+/*
+ * Panel Fitting Vertical Ratio
+ * (((image_height - 1) << 16) / ((panel_height - 1))) >> 2
+ */
+#define VR41		0x41
+
+/*
+ * Panel Fitting Horizontal Ratio
+ * (((image_width - 1) << 16) / ((panel_width - 1))) >> 2
+ */
+#define VR42		0x42
+
+/*
+ * Horizontal Image Size
+ */
+#define VR43		0x43
+
+/* VR80 GPIO 0
+ */
+#define VR80	    0x80
+#define VR81	    0x81
+#define VR82	    0x82
+#define VR83	    0x83
+#define VR84	    0x84
+#define VR85	    0x85
+#define VR86	    0x86
+#define VR87	    0x87
+
+/* VR88 GPIO 8
+ */
+#define VR88	    0x88
+
+/* Graphics BIOS scratch 0
+ */
+#define VR8E	    0x8E
+# define VR8E_PANEL_TYPE_MASK		(0xf << 0)
+# define VR8E_PANEL_INTERFACE_CMOS	(0 << 4)
+# define VR8E_PANEL_INTERFACE_LVDS	(1 << 4)
+# define VR8E_FORCE_DEFAULT_PANEL	(1 << 5)
+
+/* Graphics BIOS scratch 1
+ */
+#define VR8F	    0x8F
+# define VR8F_VCH_PRESENT		(1 << 0)
+# define VR8F_DISPLAY_CONN		(1 << 1)
+# define VR8F_POWER_MASK		(0x3c)
+# define VR8F_POWER_POS			(2)
+
+
+struct ivch_priv {
+	bool quiet;
+
+	uint16_t width, height;
+};
+
+
+static void ivch_dump_regs(struct intel_dvo_device *dvo);
+
+/**
+ * Reads a register on the ivch.
+ *
+ * Each of the 256 registers are 16 bits long.
+ */
+static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	u8 out_buf[1];
+	u8 in_buf[2];
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = dvo->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 0,
+		},
+		{
+			.addr = 0,
+			.flags = I2C_M_NOSTART,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = dvo->slave_addr,
+			.flags = I2C_M_RD | I2C_M_NOSTART,
+			.len = 2,
+			.buf = in_buf,
+		}
+	};
+
+	out_buf[0] = addr;
+
+	if (i2c_transfer(adapter, msgs, 3) == 3) {
+		*data = (in_buf[1] << 8) | in_buf[0];
+		return true;
+	};
+
+	if (!priv->quiet) {
+		DRM_DEBUG_KMS("Unable to read register 0x%02x from "
+				"%s:%02x.\n",
+			  addr, adapter->name, dvo->slave_addr);
+	}
+	return false;
+}
+
+/** Writes a 16-bit register on the ivch */
+static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	u8 out_buf[3];
+	struct i2c_msg msg = {
+		.addr = dvo->slave_addr,
+		.flags = 0,
+		.len = 3,
+		.buf = out_buf,
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = data & 0xff;
+	out_buf[2] = data >> 8;
+
+	if (i2c_transfer(adapter, &msg, 1) == 1)
+		return true;
+
+	if (!priv->quiet) {
+		DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
+			  addr, adapter->name, dvo->slave_addr);
+	}
+
+	return false;
+}
+
+/** Probes the given bus and slave address for an ivch */
+static bool ivch_init(struct intel_dvo_device *dvo,
+		      struct i2c_adapter *adapter)
+{
+	struct ivch_priv *priv;
+	uint16_t temp;
+
+	priv = kzalloc(sizeof(struct ivch_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return false;
+
+	dvo->i2c_bus = adapter;
+	dvo->dev_priv = priv;
+	priv->quiet = true;
+
+	if (!ivch_read(dvo, VR00, &temp))
+		goto out;
+	priv->quiet = false;
+
+	/* Since the identification bits are probably zeroes, which doesn't seem
+	 * very unique, check that the value in the base address field matches
+	 * the address it's responding on.
+	 */
+	if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) {
+		DRM_DEBUG_KMS("ivch detect failed due to address mismatch "
+			  "(%d vs %d)\n",
+			  (temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr);
+		goto out;
+	}
+
+	ivch_read(dvo, VR20, &priv->width);
+	ivch_read(dvo, VR21, &priv->height);
+
+	return true;
+
+out:
+	kfree(priv);
+	return false;
+}
+
+static enum drm_connector_status ivch_detect(struct intel_dvo_device *dvo)
+{
+	return connector_status_connected;
+}
+
+static enum drm_mode_status ivch_mode_valid(struct intel_dvo_device *dvo,
+					    struct drm_display_mode *mode)
+{
+	if (mode->clock > 112000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+/** Sets the power state of the panel connected to the ivch */
+static void ivch_dpms(struct intel_dvo_device *dvo, int mode)
+{
+	int i;
+	uint16_t vr01, vr30, backlight;
+
+	/* Set the new power state of the panel. */
+	if (!ivch_read(dvo, VR01, &vr01))
+		return;
+
+	if (mode == DRM_MODE_DPMS_ON)
+		backlight = 1;
+	else
+		backlight = 0;
+	ivch_write(dvo, VR80, backlight);
+
+	if (mode == DRM_MODE_DPMS_ON)
+		vr01 |= VR01_LCD_ENABLE | VR01_DVO_ENABLE;
+	else
+		vr01 &= ~(VR01_LCD_ENABLE | VR01_DVO_ENABLE);
+
+	ivch_write(dvo, VR01, vr01);
+
+	/* Wait for the panel to make its state transition */
+	for (i = 0; i < 100; i++) {
+		if (!ivch_read(dvo, VR30, &vr30))
+			break;
+
+		if (((vr30 & VR30_PANEL_ON) != 0) == (mode == DRM_MODE_DPMS_ON))
+			break;
+		udelay(1000);
+	}
+	/* wait some more; vch may fail to resync sometimes without this */
+	udelay(16 * 1000);
+}
+
+static void ivch_mode_set(struct intel_dvo_device *dvo,
+			  struct drm_display_mode *mode,
+			  struct drm_display_mode *adjusted_mode)
+{
+	uint16_t vr40 = 0;
+	uint16_t vr01;
+
+	vr01 = 0;
+	vr40 = (VR40_STALL_ENABLE | VR40_VERTICAL_INTERP_ENABLE |
+		VR40_HORIZONTAL_INTERP_ENABLE);
+
+	if (mode->hdisplay != adjusted_mode->hdisplay ||
+	    mode->vdisplay != adjusted_mode->vdisplay) {
+		uint16_t x_ratio, y_ratio;
+
+		vr01 |= VR01_PANEL_FIT_ENABLE;
+		vr40 |= VR40_CLOCK_GATING_ENABLE;
+		x_ratio = (((mode->hdisplay - 1) << 16) /
+			   (adjusted_mode->hdisplay - 1)) >> 2;
+		y_ratio = (((mode->vdisplay - 1) << 16) /
+			   (adjusted_mode->vdisplay - 1)) >> 2;
+		ivch_write(dvo, VR42, x_ratio);
+		ivch_write(dvo, VR41, y_ratio);
+	} else {
+		vr01 &= ~VR01_PANEL_FIT_ENABLE;
+		vr40 &= ~VR40_CLOCK_GATING_ENABLE;
+	}
+	vr40 &= ~VR40_AUTO_RATIO_ENABLE;
+
+	ivch_write(dvo, VR01, vr01);
+	ivch_write(dvo, VR40, vr40);
+
+	ivch_dump_regs(dvo);
+}
+
+static void ivch_dump_regs(struct intel_dvo_device *dvo)
+{
+	uint16_t val;
+
+	ivch_read(dvo, VR00, &val);
+	DRM_LOG_KMS("VR00: 0x%04x\n", val);
+	ivch_read(dvo, VR01, &val);
+	DRM_LOG_KMS("VR01: 0x%04x\n", val);
+	ivch_read(dvo, VR30, &val);
+	DRM_LOG_KMS("VR30: 0x%04x\n", val);
+	ivch_read(dvo, VR40, &val);
+	DRM_LOG_KMS("VR40: 0x%04x\n", val);
+
+	/* GPIO registers */
+	ivch_read(dvo, VR80, &val);
+	DRM_LOG_KMS("VR80: 0x%04x\n", val);
+	ivch_read(dvo, VR81, &val);
+	DRM_LOG_KMS("VR81: 0x%04x\n", val);
+	ivch_read(dvo, VR82, &val);
+	DRM_LOG_KMS("VR82: 0x%04x\n", val);
+	ivch_read(dvo, VR83, &val);
+	DRM_LOG_KMS("VR83: 0x%04x\n", val);
+	ivch_read(dvo, VR84, &val);
+	DRM_LOG_KMS("VR84: 0x%04x\n", val);
+	ivch_read(dvo, VR85, &val);
+	DRM_LOG_KMS("VR85: 0x%04x\n", val);
+	ivch_read(dvo, VR86, &val);
+	DRM_LOG_KMS("VR86: 0x%04x\n", val);
+	ivch_read(dvo, VR87, &val);
+	DRM_LOG_KMS("VR87: 0x%04x\n", val);
+	ivch_read(dvo, VR88, &val);
+	DRM_LOG_KMS("VR88: 0x%04x\n", val);
+
+	/* Scratch register 0 - AIM Panel type */
+	ivch_read(dvo, VR8E, &val);
+	DRM_LOG_KMS("VR8E: 0x%04x\n", val);
+
+	/* Scratch register 1 - Status register */
+	ivch_read(dvo, VR8F, &val);
+	DRM_LOG_KMS("VR8F: 0x%04x\n", val);
+}
+
+static void ivch_destroy(struct intel_dvo_device *dvo)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+
+	if (priv) {
+		kfree(priv);
+		dvo->dev_priv = NULL;
+	}
+}
+
+struct intel_dvo_dev_ops ivch_ops = {
+	.init = ivch_init,
+	.dpms = ivch_dpms,
+	.mode_valid = ivch_mode_valid,
+	.mode_set = ivch_mode_set,
+	.detect = ivch_detect,
+	.dump_regs = ivch_dump_regs,
+	.destroy = ivch_destroy,
+};
diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c
new file mode 100644
index 00000000..a0b13a6f
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo_sil164.c
@@ -0,0 +1,263 @@
+/**************************************************************************
+
+Copyright © 2006 Dave Airlie
+
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sub license, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice (including the
+next paragraph) shall be included in all copies or substantial portions
+of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+**************************************************************************/
+
+#include "dvo.h"
+
+#define SIL164_VID 0x0001
+#define SIL164_DID 0x0006
+
+#define SIL164_VID_LO 0x00
+#define SIL164_VID_HI 0x01
+#define SIL164_DID_LO 0x02
+#define SIL164_DID_HI 0x03
+#define SIL164_REV    0x04
+#define SIL164_RSVD   0x05
+#define SIL164_FREQ_LO 0x06
+#define SIL164_FREQ_HI 0x07
+
+#define SIL164_REG8 0x08
+#define SIL164_8_VEN (1<<5)
+#define SIL164_8_HEN (1<<4)
+#define SIL164_8_DSEL (1<<3)
+#define SIL164_8_BSEL (1<<2)
+#define SIL164_8_EDGE (1<<1)
+#define SIL164_8_PD   (1<<0)
+
+#define SIL164_REG9 0x09
+#define SIL164_9_VLOW (1<<7)
+#define SIL164_9_MSEL_MASK (0x7<<4)
+#define SIL164_9_TSEL (1<<3)
+#define SIL164_9_RSEN (1<<2)
+#define SIL164_9_HTPLG (1<<1)
+#define SIL164_9_MDI (1<<0)
+
+#define SIL164_REGC 0x0c
+
+struct sil164_priv {
+	//I2CDevRec d;
+	bool quiet;
+};
+
+#define SILPTR(d) ((SIL164Ptr)(d->DriverPrivate.ptr))
+
+static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
+{
+	struct sil164_priv *sil = dvo->dev_priv;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	u8 out_buf[2];
+	u8 in_buf[2];
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = dvo->slave_addr,
+			.flags = 0,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = dvo->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = in_buf,
+		}
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = 0;
+
+	if (i2c_transfer(adapter, msgs, 2) == 2) {
+		*ch = in_buf[0];
+		return true;
+	};
+
+	if (!sil->quiet) {
+		DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n",
+			  addr, adapter->name, dvo->slave_addr);
+	}
+	return false;
+}
+
+static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
+{
+	struct sil164_priv *sil = dvo->dev_priv;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	uint8_t out_buf[2];
+	struct i2c_msg msg = {
+		.addr = dvo->slave_addr,
+		.flags = 0,
+		.len = 2,
+		.buf = out_buf,
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = ch;
+
+	if (i2c_transfer(adapter, &msg, 1) == 1)
+		return true;
+
+	if (!sil->quiet) {
+		DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
+			  addr, adapter->name, dvo->slave_addr);
+	}
+
+	return false;
+}
+
+/* Silicon Image 164 driver for chip on i2c bus */
+static bool sil164_init(struct intel_dvo_device *dvo,
+			struct i2c_adapter *adapter)
+{
+	/* this will detect the SIL164 chip on the specified i2c bus */
+	struct sil164_priv *sil;
+	unsigned char ch;
+
+	sil = kzalloc(sizeof(struct sil164_priv), GFP_KERNEL);
+	if (sil == NULL)
+		return false;
+
+	dvo->i2c_bus = adapter;
+	dvo->dev_priv = sil;
+	sil->quiet = true;
+
+	if (!sil164_readb(dvo, SIL164_VID_LO, &ch))
+		goto out;
+
+	if (ch != (SIL164_VID & 0xff)) {
+		DRM_DEBUG_KMS("sil164 not detected got %d: from %s Slave %d.\n",
+			  ch, adapter->name, dvo->slave_addr);
+		goto out;
+	}
+
+	if (!sil164_readb(dvo, SIL164_DID_LO, &ch))
+		goto out;
+
+	if (ch != (SIL164_DID & 0xff)) {
+		DRM_DEBUG_KMS("sil164 not detected got %d: from %s Slave %d.\n",
+			  ch, adapter->name, dvo->slave_addr);
+		goto out;
+	}
+	sil->quiet = false;
+
+	DRM_DEBUG_KMS("init sil164 dvo controller successfully!\n");
+	return true;
+
+out:
+	kfree(sil);
+	return false;
+}
+
+static enum drm_connector_status sil164_detect(struct intel_dvo_device *dvo)
+{
+	uint8_t reg9;
+
+	sil164_readb(dvo, SIL164_REG9, &reg9);
+
+	if (reg9 & SIL164_9_HTPLG)
+		return connector_status_connected;
+	else
+		return connector_status_disconnected;
+}
+
+static enum drm_mode_status sil164_mode_valid(struct intel_dvo_device *dvo,
+					      struct drm_display_mode *mode)
+{
+	return MODE_OK;
+}
+
+static void sil164_mode_set(struct intel_dvo_device *dvo,
+			    struct drm_display_mode *mode,
+			    struct drm_display_mode *adjusted_mode)
+{
+	/* As long as the basics are set up, since we don't have clock
+	 * dependencies in the mode setup, we can just leave the
+	 * registers alone and everything will work fine.
+	 */
+	/* recommended programming sequence from doc */
+	/*sil164_writeb(sil, 0x08, 0x30);
+	  sil164_writeb(sil, 0x09, 0x00);
+	  sil164_writeb(sil, 0x0a, 0x90);
+	  sil164_writeb(sil, 0x0c, 0x89);
+	  sil164_writeb(sil, 0x08, 0x31);*/
+	/* don't do much */
+	return;
+}
+
+/* set the SIL164 power state */
+static void sil164_dpms(struct intel_dvo_device *dvo, int mode)
+{
+	int ret;
+	unsigned char ch;
+
+	ret = sil164_readb(dvo, SIL164_REG8, &ch);
+	if (ret == false)
+		return;
+
+	if (mode == DRM_MODE_DPMS_ON)
+		ch |= SIL164_8_PD;
+	else
+		ch &= ~SIL164_8_PD;
+
+	sil164_writeb(dvo, SIL164_REG8, ch);
+	return;
+}
+
+static void sil164_dump_regs(struct intel_dvo_device *dvo)
+{
+	uint8_t val;
+
+	sil164_readb(dvo, SIL164_FREQ_LO, &val);
+	DRM_LOG_KMS("SIL164_FREQ_LO: 0x%02x\n", val);
+	sil164_readb(dvo, SIL164_FREQ_HI, &val);
+	DRM_LOG_KMS("SIL164_FREQ_HI: 0x%02x\n", val);
+	sil164_readb(dvo, SIL164_REG8, &val);
+	DRM_LOG_KMS("SIL164_REG8: 0x%02x\n", val);
+	sil164_readb(dvo, SIL164_REG9, &val);
+	DRM_LOG_KMS("SIL164_REG9: 0x%02x\n", val);
+	sil164_readb(dvo, SIL164_REGC, &val);
+	DRM_LOG_KMS("SIL164_REGC: 0x%02x\n", val);
+}
+
+static void sil164_destroy(struct intel_dvo_device *dvo)
+{
+	struct sil164_priv *sil = dvo->dev_priv;
+
+	if (sil) {
+		kfree(sil);
+		dvo->dev_priv = NULL;
+	}
+}
+
+struct intel_dvo_dev_ops sil164_ops = {
+	.init = sil164_init,
+	.detect = sil164_detect,
+	.mode_valid = sil164_mode_valid,
+	.mode_set = sil164_mode_set,
+	.dpms = sil164_dpms,
+	.dump_regs = sil164_dump_regs,
+	.destroy = sil164_destroy,
+};
diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c
new file mode 100644
index 00000000..aa2cd3ec
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo_tfp410.c
@@ -0,0 +1,304 @@
+/*
+ * Copyright © 2007 Dave Mueller
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Dave Mueller <dave.mueller@gmx.ch>
+ *
+ */
+
+#include "dvo.h"
+
+/* register definitions according to the TFP410 data sheet */
+#define TFP410_VID		0x014C
+#define TFP410_DID		0x0410
+
+#define TFP410_VID_LO		0x00
+#define TFP410_VID_HI		0x01
+#define TFP410_DID_LO		0x02
+#define TFP410_DID_HI		0x03
+#define TFP410_REV		0x04
+
+#define TFP410_CTL_1		0x08
+#define TFP410_CTL_1_TDIS	(1<<6)
+#define TFP410_CTL_1_VEN	(1<<5)
+#define TFP410_CTL_1_HEN	(1<<4)
+#define TFP410_CTL_1_DSEL	(1<<3)
+#define TFP410_CTL_1_BSEL	(1<<2)
+#define TFP410_CTL_1_EDGE	(1<<1)
+#define TFP410_CTL_1_PD		(1<<0)
+
+#define TFP410_CTL_2		0x09
+#define TFP410_CTL_2_VLOW	(1<<7)
+#define TFP410_CTL_2_MSEL_MASK	(0x7<<4)
+#define TFP410_CTL_2_MSEL	(1<<4)
+#define TFP410_CTL_2_TSEL	(1<<3)
+#define TFP410_CTL_2_RSEN	(1<<2)
+#define TFP410_CTL_2_HTPLG	(1<<1)
+#define TFP410_CTL_2_MDI	(1<<0)
+
+#define TFP410_CTL_3		0x0A
+#define TFP410_CTL_3_DK_MASK	(0x7<<5)
+#define TFP410_CTL_3_DK		(1<<5)
+#define TFP410_CTL_3_DKEN	(1<<4)
+#define TFP410_CTL_3_CTL_MASK	(0x7<<1)
+#define TFP410_CTL_3_CTL	(1<<1)
+
+#define TFP410_USERCFG		0x0B
+
+#define TFP410_DE_DLY		0x32
+
+#define TFP410_DE_CTL		0x33
+#define TFP410_DE_CTL_DEGEN	(1<<6)
+#define TFP410_DE_CTL_VSPOL	(1<<5)
+#define TFP410_DE_CTL_HSPOL	(1<<4)
+#define TFP410_DE_CTL_DEDLY8	(1<<0)
+
+#define TFP410_DE_TOP		0x34
+
+#define TFP410_DE_CNT_LO	0x36
+#define TFP410_DE_CNT_HI	0x37
+
+#define TFP410_DE_LIN_LO	0x38
+#define TFP410_DE_LIN_HI	0x39
+
+#define TFP410_H_RES_LO		0x3A
+#define TFP410_H_RES_HI		0x3B
+
+#define TFP410_V_RES_LO		0x3C
+#define TFP410_V_RES_HI		0x3D
+
+struct tfp410_priv {
+	bool quiet;
+};
+
+static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
+{
+	struct tfp410_priv *tfp = dvo->dev_priv;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	u8 out_buf[2];
+	u8 in_buf[2];
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = dvo->slave_addr,
+			.flags = 0,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = dvo->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = in_buf,
+		}
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = 0;
+
+	if (i2c_transfer(adapter, msgs, 2) == 2) {
+		*ch = in_buf[0];
+		return true;
+	};
+
+	if (!tfp->quiet) {
+		DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n",
+			  addr, adapter->name, dvo->slave_addr);
+	}
+	return false;
+}
+
+static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
+{
+	struct tfp410_priv *tfp = dvo->dev_priv;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	uint8_t out_buf[2];
+	struct i2c_msg msg = {
+		.addr = dvo->slave_addr,
+		.flags = 0,
+		.len = 2,
+		.buf = out_buf,
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = ch;
+
+	if (i2c_transfer(adapter, &msg, 1) == 1)
+		return true;
+
+	if (!tfp->quiet) {
+		DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
+			  addr, adapter->name, dvo->slave_addr);
+	}
+
+	return false;
+}
+
+static int tfp410_getid(struct intel_dvo_device *dvo, int addr)
+{
+	uint8_t ch1, ch2;
+
+	if (tfp410_readb(dvo, addr+0, &ch1) &&
+	    tfp410_readb(dvo, addr+1, &ch2))
+		return ((ch2 << 8) & 0xFF00) | (ch1 & 0x00FF);
+
+	return -1;
+}
+
+/* Ti TFP410 driver for chip on i2c bus */
+static bool tfp410_init(struct intel_dvo_device *dvo,
+			struct i2c_adapter *adapter)
+{
+	/* this will detect the tfp410 chip on the specified i2c bus */
+	struct tfp410_priv *tfp;
+	int id;
+
+	tfp = kzalloc(sizeof(struct tfp410_priv), GFP_KERNEL);
+	if (tfp == NULL)
+		return false;
+
+	dvo->i2c_bus = adapter;
+	dvo->dev_priv = tfp;
+	tfp->quiet = true;
+
+	if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) {
+		DRM_DEBUG_KMS("tfp410 not detected got VID %X: from %s "
+				"Slave %d.\n",
+			  id, adapter->name, dvo->slave_addr);
+		goto out;
+	}
+
+	if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) {
+		DRM_DEBUG_KMS("tfp410 not detected got DID %X: from %s "
+				"Slave %d.\n",
+			  id, adapter->name, dvo->slave_addr);
+		goto out;
+	}
+	tfp->quiet = false;
+	return true;
+out:
+	kfree(tfp);
+	return false;
+}
+
+static enum drm_connector_status tfp410_detect(struct intel_dvo_device *dvo)
+{
+	enum drm_connector_status ret = connector_status_disconnected;
+	uint8_t ctl2;
+
+	if (tfp410_readb(dvo, TFP410_CTL_2, &ctl2)) {
+		if (ctl2 & TFP410_CTL_2_RSEN)
+			ret = connector_status_connected;
+		else
+			ret = connector_status_disconnected;
+	}
+
+	return ret;
+}
+
+static enum drm_mode_status tfp410_mode_valid(struct intel_dvo_device *dvo,
+					      struct drm_display_mode *mode)
+{
+	return MODE_OK;
+}
+
+static void tfp410_mode_set(struct intel_dvo_device *dvo,
+			    struct drm_display_mode *mode,
+			    struct drm_display_mode *adjusted_mode)
+{
+	/* As long as the basics are set up, since we don't have clock dependencies
+	* in the mode setup, we can just leave the registers alone and everything
+	* will work fine.
+	*/
+	/* don't do much */
+	return;
+}
+
+/* set the tfp410 power state */
+static void tfp410_dpms(struct intel_dvo_device *dvo, int mode)
+{
+	uint8_t ctl1;
+
+	if (!tfp410_readb(dvo, TFP410_CTL_1, &ctl1))
+		return;
+
+	if (mode == DRM_MODE_DPMS_ON)
+		ctl1 |= TFP410_CTL_1_PD;
+	else
+		ctl1 &= ~TFP410_CTL_1_PD;
+
+	tfp410_writeb(dvo, TFP410_CTL_1, ctl1);
+}
+
+static void tfp410_dump_regs(struct intel_dvo_device *dvo)
+{
+	uint8_t val, val2;
+
+	tfp410_readb(dvo, TFP410_REV, &val);
+	DRM_LOG_KMS("TFP410_REV: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_CTL_1, &val);
+	DRM_LOG_KMS("TFP410_CTL1: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_CTL_2, &val);
+	DRM_LOG_KMS("TFP410_CTL2: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_CTL_3, &val);
+	DRM_LOG_KMS("TFP410_CTL3: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_USERCFG, &val);
+	DRM_LOG_KMS("TFP410_USERCFG: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_DE_DLY, &val);
+	DRM_LOG_KMS("TFP410_DE_DLY: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_DE_CTL, &val);
+	DRM_LOG_KMS("TFP410_DE_CTL: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_DE_TOP, &val);
+	DRM_LOG_KMS("TFP410_DE_TOP: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_DE_CNT_LO, &val);
+	tfp410_readb(dvo, TFP410_DE_CNT_HI, &val2);
+	DRM_LOG_KMS("TFP410_DE_CNT: 0x%02X%02X\n", val2, val);
+	tfp410_readb(dvo, TFP410_DE_LIN_LO, &val);
+	tfp410_readb(dvo, TFP410_DE_LIN_HI, &val2);
+	DRM_LOG_KMS("TFP410_DE_LIN: 0x%02X%02X\n", val2, val);
+	tfp410_readb(dvo, TFP410_H_RES_LO, &val);
+	tfp410_readb(dvo, TFP410_H_RES_HI, &val2);
+	DRM_LOG_KMS("TFP410_H_RES: 0x%02X%02X\n", val2, val);
+	tfp410_readb(dvo, TFP410_V_RES_LO, &val);
+	tfp410_readb(dvo, TFP410_V_RES_HI, &val2);
+	DRM_LOG_KMS("TFP410_V_RES: 0x%02X%02X\n", val2, val);
+}
+
+static void tfp410_destroy(struct intel_dvo_device *dvo)
+{
+	struct tfp410_priv *tfp = dvo->dev_priv;
+
+	if (tfp) {
+		kfree(tfp);
+		dvo->dev_priv = NULL;
+	}
+}
+
+struct intel_dvo_dev_ops tfp410_ops = {
+	.init = tfp410_init,
+	.detect = tfp410_detect,
+	.mode_valid = tfp410_mode_valid,
+	.mode_set = tfp410_mode_set,
+	.dpms = tfp410_dpms,
+	.dump_regs = tfp410_dump_regs,
+	.destroy = tfp410_destroy,
+};
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
new file mode 100644
index 00000000..e6162a16
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -0,0 +1,1890 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *    Keith Packard <keithp@keithp.com>
+ *
+ */
+
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include "drmP.h"
+#include "drm.h"
+#include "intel_drv.h"
+#include "intel_ringbuffer.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+#define DRM_I915_RING_DEBUG 1
+
+
+#if defined(CONFIG_DEBUG_FS)
+
+enum {
+	ACTIVE_LIST,
+	FLUSHING_LIST,
+	INACTIVE_LIST,
+	PINNED_LIST,
+	DEFERRED_FREE_LIST,
+};
+
+static const char *yesno(int v)
+{
+	return v ? "yes" : "no";
+}
+
+static int i915_capabilities(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	const struct intel_device_info *info = INTEL_INFO(dev);
+
+	seq_printf(m, "gen: %d\n", info->gen);
+	seq_printf(m, "pch: %d\n", INTEL_PCH_TYPE(dev));
+#define B(x) seq_printf(m, #x ": %s\n", yesno(info->x))
+	B(is_mobile);
+	B(is_i85x);
+	B(is_i915g);
+	B(is_i945gm);
+	B(is_g33);
+	B(need_gfx_hws);
+	B(is_g4x);
+	B(is_pineview);
+	B(is_broadwater);
+	B(is_crestline);
+	B(has_fbc);
+	B(has_pipe_cxsr);
+	B(has_hotplug);
+	B(cursor_needs_physical);
+	B(has_overlay);
+	B(overlay_needs_physical);
+	B(supports_tv);
+	B(has_bsd_ring);
+	B(has_blt_ring);
+	B(has_llc);
+#undef B
+
+	return 0;
+}
+
+static const char *get_pin_flag(struct drm_i915_gem_object *obj)
+{
+	if (obj->user_pin_count > 0)
+		return "P";
+	else if (obj->pin_count > 0)
+		return "p";
+	else
+		return " ";
+}
+
+static const char *get_tiling_flag(struct drm_i915_gem_object *obj)
+{
+	switch (obj->tiling_mode) {
+	default:
+	case I915_TILING_NONE: return " ";
+	case I915_TILING_X: return "X";
+	case I915_TILING_Y: return "Y";
+	}
+}
+
+static const char *cache_level_str(int type)
+{
+	switch (type) {
+	case I915_CACHE_NONE: return " uncached";
+	case I915_CACHE_LLC: return " snooped (LLC)";
+	case I915_CACHE_LLC_MLC: return " snooped (LLC+MLC)";
+	default: return "";
+	}
+}
+
+static void
+describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
+{
+	seq_printf(m, "%p: %s%s %8zdKiB %04x %04x %d %d%s%s%s",
+		   &obj->base,
+		   get_pin_flag(obj),
+		   get_tiling_flag(obj),
+		   obj->base.size / 1024,
+		   obj->base.read_domains,
+		   obj->base.write_domain,
+		   obj->last_rendering_seqno,
+		   obj->last_fenced_seqno,
+		   cache_level_str(obj->cache_level),
+		   obj->dirty ? " dirty" : "",
+		   obj->madv == I915_MADV_DONTNEED ? " purgeable" : "");
+	if (obj->base.name)
+		seq_printf(m, " (name: %d)", obj->base.name);
+	if (obj->fence_reg != I915_FENCE_REG_NONE)
+		seq_printf(m, " (fence: %d)", obj->fence_reg);
+	if (obj->gtt_space != NULL)
+		seq_printf(m, " (gtt offset: %08x, size: %08x)",
+			   obj->gtt_offset, (unsigned int)obj->gtt_space->size);
+	if (obj->pin_mappable || obj->fault_mappable) {
+		char s[3], *t = s;
+		if (obj->pin_mappable)
+			*t++ = 'p';
+		if (obj->fault_mappable)
+			*t++ = 'f';
+		*t = '\0';
+		seq_printf(m, " (%s mappable)", s);
+	}
+	if (obj->ring != NULL)
+		seq_printf(m, " (%s)", obj->ring->name);
+}
+
+static int i915_gem_object_list_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	uintptr_t list = (uintptr_t) node->info_ent->data;
+	struct list_head *head;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	size_t total_obj_size, total_gtt_size;
+	int count, ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	switch (list) {
+	case ACTIVE_LIST:
+		seq_printf(m, "Active:\n");
+		head = &dev_priv->mm.active_list;
+		break;
+	case INACTIVE_LIST:
+		seq_printf(m, "Inactive:\n");
+		head = &dev_priv->mm.inactive_list;
+		break;
+	case PINNED_LIST:
+		seq_printf(m, "Pinned:\n");
+		head = &dev_priv->mm.pinned_list;
+		break;
+	case FLUSHING_LIST:
+		seq_printf(m, "Flushing:\n");
+		head = &dev_priv->mm.flushing_list;
+		break;
+	case DEFERRED_FREE_LIST:
+		seq_printf(m, "Deferred free:\n");
+		head = &dev_priv->mm.deferred_free_list;
+		break;
+	default:
+		mutex_unlock(&dev->struct_mutex);
+		return -EINVAL;
+	}
+
+	total_obj_size = total_gtt_size = count = 0;
+	list_for_each_entry(obj, head, mm_list) {
+		seq_printf(m, "   ");
+		describe_obj(m, obj);
+		seq_printf(m, "\n");
+		total_obj_size += obj->base.size;
+		total_gtt_size += obj->gtt_space->size;
+		count++;
+	}
+	mutex_unlock(&dev->struct_mutex);
+
+	seq_printf(m, "Total %d objects, %zu bytes, %zu GTT size\n",
+		   count, total_obj_size, total_gtt_size);
+	return 0;
+}
+
+#define count_objects(list, member) do { \
+	list_for_each_entry(obj, list, member) { \
+		size += obj->gtt_space->size; \
+		++count; \
+		if (obj->map_and_fenceable) { \
+			mappable_size += obj->gtt_space->size; \
+			++mappable_count; \
+		} \
+	} \
+} while (0)
+
+static int i915_gem_object_info(struct seq_file *m, void* data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 count, mappable_count;
+	size_t size, mappable_size;
+	struct drm_i915_gem_object *obj;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	seq_printf(m, "%u objects, %zu bytes\n",
+		   dev_priv->mm.object_count,
+		   dev_priv->mm.object_memory);
+
+	size = count = mappable_size = mappable_count = 0;
+	count_objects(&dev_priv->mm.gtt_list, gtt_list);
+	seq_printf(m, "%u [%u] objects, %zu [%zu] bytes in gtt\n",
+		   count, mappable_count, size, mappable_size);
+
+	size = count = mappable_size = mappable_count = 0;
+	count_objects(&dev_priv->mm.active_list, mm_list);
+	count_objects(&dev_priv->mm.flushing_list, mm_list);
+	seq_printf(m, "  %u [%u] active objects, %zu [%zu] bytes\n",
+		   count, mappable_count, size, mappable_size);
+
+	size = count = mappable_size = mappable_count = 0;
+	count_objects(&dev_priv->mm.pinned_list, mm_list);
+	seq_printf(m, "  %u [%u] pinned objects, %zu [%zu] bytes\n",
+		   count, mappable_count, size, mappable_size);
+
+	size = count = mappable_size = mappable_count = 0;
+	count_objects(&dev_priv->mm.inactive_list, mm_list);
+	seq_printf(m, "  %u [%u] inactive objects, %zu [%zu] bytes\n",
+		   count, mappable_count, size, mappable_size);
+
+	size = count = mappable_size = mappable_count = 0;
+	count_objects(&dev_priv->mm.deferred_free_list, mm_list);
+	seq_printf(m, "  %u [%u] freed objects, %zu [%zu] bytes\n",
+		   count, mappable_count, size, mappable_size);
+
+	size = count = mappable_size = mappable_count = 0;
+	list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) {
+		if (obj->fault_mappable) {
+			size += obj->gtt_space->size;
+			++count;
+		}
+		if (obj->pin_mappable) {
+			mappable_size += obj->gtt_space->size;
+			++mappable_count;
+		}
+	}
+	seq_printf(m, "%u pinned mappable objects, %zu bytes\n",
+		   mappable_count, mappable_size);
+	seq_printf(m, "%u fault mappable objects, %zu bytes\n",
+		   count, size);
+
+	seq_printf(m, "%zu [%zu] gtt total\n",
+		   dev_priv->mm.gtt_total, dev_priv->mm.mappable_gtt_total);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static int i915_gem_gtt_info(struct seq_file *m, void* data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	size_t total_obj_size, total_gtt_size;
+	int count, ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	total_obj_size = total_gtt_size = count = 0;
+	list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) {
+		seq_printf(m, "   ");
+		describe_obj(m, obj);
+		seq_printf(m, "\n");
+		total_obj_size += obj->base.size;
+		total_gtt_size += obj->gtt_space->size;
+		count++;
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	seq_printf(m, "Total %d objects, %zu bytes, %zu GTT size\n",
+		   count, total_obj_size, total_gtt_size);
+
+	return 0;
+}
+
+
+static int i915_gem_pageflip_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	unsigned long flags;
+	struct intel_crtc *crtc;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
+		const char pipe = pipe_name(crtc->pipe);
+		const char plane = plane_name(crtc->plane);
+		struct intel_unpin_work *work;
+
+		spin_lock_irqsave(&dev->event_lock, flags);
+		work = crtc->unpin_work;
+		if (work == NULL) {
+			seq_printf(m, "No flip due on pipe %c (plane %c)\n",
+				   pipe, plane);
+		} else {
+			if (!work->pending) {
+				seq_printf(m, "Flip queued on pipe %c (plane %c)\n",
+					   pipe, plane);
+			} else {
+				seq_printf(m, "Flip pending (waiting for vsync) on pipe %c (plane %c)\n",
+					   pipe, plane);
+			}
+			if (work->enable_stall_check)
+				seq_printf(m, "Stall check enabled, ");
+			else
+				seq_printf(m, "Stall check waiting for page flip ioctl, ");
+			seq_printf(m, "%d prepares\n", work->pending);
+
+			if (work->old_fb_obj) {
+				struct drm_i915_gem_object *obj = work->old_fb_obj;
+				if (obj)
+					seq_printf(m, "Old framebuffer gtt_offset 0x%08x\n", obj->gtt_offset);
+			}
+			if (work->pending_flip_obj) {
+				struct drm_i915_gem_object *obj = work->pending_flip_obj;
+				if (obj)
+					seq_printf(m, "New framebuffer gtt_offset 0x%08x\n", obj->gtt_offset);
+			}
+		}
+		spin_unlock_irqrestore(&dev->event_lock, flags);
+	}
+
+	return 0;
+}
+
+static int i915_gem_request_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_request *gem_request;
+	int ret, count;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	count = 0;
+	if (!list_empty(&dev_priv->ring[RCS].request_list)) {
+		seq_printf(m, "Render requests:\n");
+		list_for_each_entry(gem_request,
+				    &dev_priv->ring[RCS].request_list,
+				    list) {
+			seq_printf(m, "    %d @ %d\n",
+				   gem_request->seqno,
+				   (int) (jiffies - gem_request->emitted_jiffies));
+		}
+		count++;
+	}
+	if (!list_empty(&dev_priv->ring[VCS].request_list)) {
+		seq_printf(m, "BSD requests:\n");
+		list_for_each_entry(gem_request,
+				    &dev_priv->ring[VCS].request_list,
+				    list) {
+			seq_printf(m, "    %d @ %d\n",
+				   gem_request->seqno,
+				   (int) (jiffies - gem_request->emitted_jiffies));
+		}
+		count++;
+	}
+	if (!list_empty(&dev_priv->ring[BCS].request_list)) {
+		seq_printf(m, "BLT requests:\n");
+		list_for_each_entry(gem_request,
+				    &dev_priv->ring[BCS].request_list,
+				    list) {
+			seq_printf(m, "    %d @ %d\n",
+				   gem_request->seqno,
+				   (int) (jiffies - gem_request->emitted_jiffies));
+		}
+		count++;
+	}
+	mutex_unlock(&dev->struct_mutex);
+
+	if (count == 0)
+		seq_printf(m, "No requests\n");
+
+	return 0;
+}
+
+static void i915_ring_seqno_info(struct seq_file *m,
+				 struct intel_ring_buffer *ring)
+{
+	if (ring->get_seqno) {
+		seq_printf(m, "Current sequence (%s): %d\n",
+			   ring->name, ring->get_seqno(ring));
+		seq_printf(m, "Waiter sequence (%s):  %d\n",
+			   ring->name, ring->waiting_seqno);
+		seq_printf(m, "IRQ sequence (%s):     %d\n",
+			   ring->name, ring->irq_seqno);
+	}
+}
+
+static int i915_gem_seqno_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret, i;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < I915_NUM_RINGS; i++)
+		i915_ring_seqno_info(m, &dev_priv->ring[i]);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+
+static int i915_interrupt_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret, i, pipe;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	if (!HAS_PCH_SPLIT(dev)) {
+		seq_printf(m, "Interrupt enable:    %08x\n",
+			   I915_READ(IER));
+		seq_printf(m, "Interrupt identity:  %08x\n",
+			   I915_READ(IIR));
+		seq_printf(m, "Interrupt mask:      %08x\n",
+			   I915_READ(IMR));
+		for_each_pipe(pipe)
+			seq_printf(m, "Pipe %c stat:         %08x\n",
+				   pipe_name(pipe),
+				   I915_READ(PIPESTAT(pipe)));
+	} else {
+		seq_printf(m, "North Display Interrupt enable:		%08x\n",
+			   I915_READ(DEIER));
+		seq_printf(m, "North Display Interrupt identity:	%08x\n",
+			   I915_READ(DEIIR));
+		seq_printf(m, "North Display Interrupt mask:		%08x\n",
+			   I915_READ(DEIMR));
+		seq_printf(m, "South Display Interrupt enable:		%08x\n",
+			   I915_READ(SDEIER));
+		seq_printf(m, "South Display Interrupt identity:	%08x\n",
+			   I915_READ(SDEIIR));
+		seq_printf(m, "South Display Interrupt mask:		%08x\n",
+			   I915_READ(SDEIMR));
+		seq_printf(m, "Graphics Interrupt enable:		%08x\n",
+			   I915_READ(GTIER));
+		seq_printf(m, "Graphics Interrupt identity:		%08x\n",
+			   I915_READ(GTIIR));
+		seq_printf(m, "Graphics Interrupt mask:		%08x\n",
+			   I915_READ(GTIMR));
+	}
+	seq_printf(m, "Interrupts received: %d\n",
+		   atomic_read(&dev_priv->irq_received));
+	for (i = 0; i < I915_NUM_RINGS; i++) {
+		if (IS_GEN6(dev) || IS_GEN7(dev)) {
+			seq_printf(m, "Graphics Interrupt mask (%s):	%08x\n",
+				   dev_priv->ring[i].name,
+				   I915_READ_IMR(&dev_priv->ring[i]));
+		}
+		i915_ring_seqno_info(m, &dev_priv->ring[i]);
+	}
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static int i915_gem_fence_regs_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int i, ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	seq_printf(m, "Reserved fences = %d\n", dev_priv->fence_reg_start);
+	seq_printf(m, "Total fences = %d\n", dev_priv->num_fence_regs);
+	for (i = 0; i < dev_priv->num_fence_regs; i++) {
+		struct drm_i915_gem_object *obj = dev_priv->fence_regs[i].obj;
+
+		seq_printf(m, "Fenced object[%2d] = ", i);
+		if (obj == NULL)
+			seq_printf(m, "unused");
+		else
+			describe_obj(m, obj);
+		seq_printf(m, "\n");
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+}
+
+static int i915_hws_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring;
+	const volatile u32 __iomem *hws;
+	int i;
+
+	ring = &dev_priv->ring[(uintptr_t)node->info_ent->data];
+	hws = (volatile u32 __iomem *)ring->status_page.page_addr;
+	if (hws == NULL)
+		return 0;
+
+	for (i = 0; i < 4096 / sizeof(u32) / 4; i += 4) {
+		seq_printf(m, "0x%08x: 0x%08x 0x%08x 0x%08x 0x%08x\n",
+			   i * 4,
+			   hws[i], hws[i + 1], hws[i + 2], hws[i + 3]);
+	}
+	return 0;
+}
+
+static int i915_ringbuffer_data(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	ring = &dev_priv->ring[(uintptr_t)node->info_ent->data];
+	if (!ring->obj) {
+		seq_printf(m, "No ringbuffer setup\n");
+	} else {
+		const u8 __iomem *virt = ring->virtual_start;
+		uint32_t off;
+
+		for (off = 0; off < ring->size; off += 4) {
+			uint32_t *ptr = (uint32_t *)(virt + off);
+			seq_printf(m, "%08x :  %08x\n", off, *ptr);
+		}
+	}
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static int i915_ringbuffer_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring;
+	int ret;
+
+	ring = &dev_priv->ring[(uintptr_t)node->info_ent->data];
+	if (ring->size == 0)
+		return 0;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	seq_printf(m, "Ring %s:\n", ring->name);
+	seq_printf(m, "  Head :    %08x\n", I915_READ_HEAD(ring) & HEAD_ADDR);
+	seq_printf(m, "  Tail :    %08x\n", I915_READ_TAIL(ring) & TAIL_ADDR);
+	seq_printf(m, "  Size :    %08x\n", ring->size);
+	seq_printf(m, "  Active :  %08x\n", intel_ring_get_active_head(ring));
+	seq_printf(m, "  NOPID :   %08x\n", I915_READ_NOPID(ring));
+	if (IS_GEN6(dev) || IS_GEN7(dev)) {
+		seq_printf(m, "  Sync 0 :   %08x\n", I915_READ_SYNC_0(ring));
+		seq_printf(m, "  Sync 1 :   %08x\n", I915_READ_SYNC_1(ring));
+	}
+	seq_printf(m, "  Control : %08x\n", I915_READ_CTL(ring));
+	seq_printf(m, "  Start :   %08x\n", I915_READ_START(ring));
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static const char *ring_str(int ring)
+{
+	switch (ring) {
+	case RCS: return "render";
+	case VCS: return "bsd";
+	case BCS: return "blt";
+	default: return "";
+	}
+}
+
+static const char *pin_flag(int pinned)
+{
+	if (pinned > 0)
+		return " P";
+	else if (pinned < 0)
+		return " p";
+	else
+		return "";
+}
+
+static const char *tiling_flag(int tiling)
+{
+	switch (tiling) {
+	default:
+	case I915_TILING_NONE: return "";
+	case I915_TILING_X: return " X";
+	case I915_TILING_Y: return " Y";
+	}
+}
+
+static const char *dirty_flag(int dirty)
+{
+	return dirty ? " dirty" : "";
+}
+
+static const char *purgeable_flag(int purgeable)
+{
+	return purgeable ? " purgeable" : "";
+}
+
+static void print_error_buffers(struct seq_file *m,
+				const char *name,
+				struct drm_i915_error_buffer *err,
+				int count)
+{
+	seq_printf(m, "%s [%d]:\n", name, count);
+
+	while (count--) {
+		seq_printf(m, "  %08x %8u %04x %04x %08x%s%s%s%s%s%s%s",
+			   err->gtt_offset,
+			   err->size,
+			   err->read_domains,
+			   err->write_domain,
+			   err->seqno,
+			   pin_flag(err->pinned),
+			   tiling_flag(err->tiling),
+			   dirty_flag(err->dirty),
+			   purgeable_flag(err->purgeable),
+			   err->ring != -1 ? " " : "",
+			   ring_str(err->ring),
+			   cache_level_str(err->cache_level));
+
+		if (err->name)
+			seq_printf(m, " (name: %d)", err->name);
+		if (err->fence_reg != I915_FENCE_REG_NONE)
+			seq_printf(m, " (fence: %d)", err->fence_reg);
+
+		seq_printf(m, "\n");
+		err++;
+	}
+}
+
+static void i915_ring_error_state(struct seq_file *m,
+				  struct drm_device *dev,
+				  struct drm_i915_error_state *error,
+				  unsigned ring)
+{
+	seq_printf(m, "%s command stream:\n", ring_str(ring));
+	seq_printf(m, "  HEAD: 0x%08x\n", error->head[ring]);
+	seq_printf(m, "  TAIL: 0x%08x\n", error->tail[ring]);
+	seq_printf(m, "  ACTHD: 0x%08x\n", error->acthd[ring]);
+	seq_printf(m, "  IPEIR: 0x%08x\n", error->ipeir[ring]);
+	seq_printf(m, "  IPEHR: 0x%08x\n", error->ipehr[ring]);
+	seq_printf(m, "  INSTDONE: 0x%08x\n", error->instdone[ring]);
+	if (ring == RCS && INTEL_INFO(dev)->gen >= 4) {
+		seq_printf(m, "  INSTDONE1: 0x%08x\n", error->instdone1);
+		seq_printf(m, "  BBADDR: 0x%08llx\n", error->bbaddr);
+	}
+	if (INTEL_INFO(dev)->gen >= 4)
+		seq_printf(m, "  INSTPS: 0x%08x\n", error->instps[ring]);
+	seq_printf(m, "  INSTPM: 0x%08x\n", error->instpm[ring]);
+	if (INTEL_INFO(dev)->gen >= 6) {
+		seq_printf(m, "  FADDR: 0x%08x\n", error->faddr[ring]);
+		seq_printf(m, "  FAULT_REG: 0x%08x\n", error->fault_reg[ring]);
+		seq_printf(m, "  SYNC_0: 0x%08x\n",
+			   error->semaphore_mboxes[ring][0]);
+		seq_printf(m, "  SYNC_1: 0x%08x\n",
+			   error->semaphore_mboxes[ring][1]);
+	}
+	seq_printf(m, "  seqno: 0x%08x\n", error->seqno[ring]);
+	seq_printf(m, "  ring->head: 0x%08x\n", error->cpu_ring_head[ring]);
+	seq_printf(m, "  ring->tail: 0x%08x\n", error->cpu_ring_tail[ring]);
+}
+
+static int i915_error_state(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_error_state *error;
+	unsigned long flags;
+	int i, j, page, offset, elt;
+
+	spin_lock_irqsave(&dev_priv->error_lock, flags);
+	if (!dev_priv->first_error) {
+		seq_printf(m, "no error state collected\n");
+		goto out;
+	}
+
+	error = dev_priv->first_error;
+
+	seq_printf(m, "Time: %ld s %ld us\n", error->time.tv_sec,
+		   error->time.tv_usec);
+	seq_printf(m, "PCI ID: 0x%04x\n", dev->pci_device);
+	seq_printf(m, "EIR: 0x%08x\n", error->eir);
+	seq_printf(m, "PGTBL_ER: 0x%08x\n", error->pgtbl_er);
+
+	for (i = 0; i < dev_priv->num_fence_regs; i++)
+		seq_printf(m, "  fence[%d] = %08llx\n", i, error->fence[i]);
+
+	if (INTEL_INFO(dev)->gen >= 6) {
+		seq_printf(m, "ERROR: 0x%08x\n", error->error);
+		seq_printf(m, "DONE_REG: 0x%08x\n", error->done_reg);
+	}
+
+	i915_ring_error_state(m, dev, error, RCS);
+	if (HAS_BLT(dev))
+		i915_ring_error_state(m, dev, error, BCS);
+	if (HAS_BSD(dev))
+		i915_ring_error_state(m, dev, error, VCS);
+
+	if (error->active_bo)
+		print_error_buffers(m, "Active",
+				    error->active_bo,
+				    error->active_bo_count);
+
+	if (error->pinned_bo)
+		print_error_buffers(m, "Pinned",
+				    error->pinned_bo,
+				    error->pinned_bo_count);
+
+	for (i = 0; i < ARRAY_SIZE(error->ring); i++) {
+		struct drm_i915_error_object *obj;
+
+		if ((obj = error->ring[i].batchbuffer)) {
+			seq_printf(m, "%s --- gtt_offset = 0x%08x\n",
+				   dev_priv->ring[i].name,
+				   obj->gtt_offset);
+			offset = 0;
+			for (page = 0; page < obj->page_count; page++) {
+				for (elt = 0; elt < PAGE_SIZE/4; elt++) {
+					seq_printf(m, "%08x :  %08x\n", offset, obj->pages[page][elt]);
+					offset += 4;
+				}
+			}
+		}
+
+		if (error->ring[i].num_requests) {
+			seq_printf(m, "%s --- %d requests\n",
+				   dev_priv->ring[i].name,
+				   error->ring[i].num_requests);
+			for (j = 0; j < error->ring[i].num_requests; j++) {
+				seq_printf(m, "  seqno 0x%08x, emitted %ld, tail 0x%08x\n",
+					   error->ring[i].requests[j].seqno,
+					   error->ring[i].requests[j].jiffies,
+					   error->ring[i].requests[j].tail);
+			}
+		}
+
+		if ((obj = error->ring[i].ringbuffer)) {
+			seq_printf(m, "%s --- ringbuffer = 0x%08x\n",
+				   dev_priv->ring[i].name,
+				   obj->gtt_offset);
+			offset = 0;
+			for (page = 0; page < obj->page_count; page++) {
+				for (elt = 0; elt < PAGE_SIZE/4; elt++) {
+					seq_printf(m, "%08x :  %08x\n",
+						   offset,
+						   obj->pages[page][elt]);
+					offset += 4;
+				}
+			}
+		}
+	}
+
+	if (error->overlay)
+		intel_overlay_print_error_state(m, error->overlay);
+
+	if (error->display)
+		intel_display_print_error_state(m, dev, error->display);
+
+out:
+	spin_unlock_irqrestore(&dev_priv->error_lock, flags);
+
+	return 0;
+}
+
+static int i915_rstdby_delays(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u16 crstanddelay;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	crstanddelay = I915_READ16(CRSTANDVID);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	seq_printf(m, "w/ctx: %d, w/o ctx: %d\n", (crstanddelay >> 8) & 0x3f, (crstanddelay & 0x3f));
+
+	return 0;
+}
+
+static int i915_cur_delayinfo(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	if (IS_GEN5(dev)) {
+		u16 rgvswctl = I915_READ16(MEMSWCTL);
+		u16 rgvstat = I915_READ16(MEMSTAT_ILK);
+
+		seq_printf(m, "Requested P-state: %d\n", (rgvswctl >> 8) & 0xf);
+		seq_printf(m, "Requested VID: %d\n", rgvswctl & 0x3f);
+		seq_printf(m, "Current VID: %d\n", (rgvstat & MEMSTAT_VID_MASK) >>
+			   MEMSTAT_VID_SHIFT);
+		seq_printf(m, "Current P-state: %d\n",
+			   (rgvstat & MEMSTAT_PSTATE_MASK) >> MEMSTAT_PSTATE_SHIFT);
+	} else if (IS_GEN6(dev) || IS_GEN7(dev)) {
+		u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
+		u32 rp_state_limits = I915_READ(GEN6_RP_STATE_LIMITS);
+		u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+		u32 rpstat;
+		u32 rpupei, rpcurup, rpprevup;
+		u32 rpdownei, rpcurdown, rpprevdown;
+		int max_freq;
+
+		/* RPSTAT1 is in the GT power well */
+		ret = mutex_lock_interruptible(&dev->struct_mutex);
+		if (ret)
+			return ret;
+
+		gen6_gt_force_wake_get(dev_priv);
+
+		rpstat = I915_READ(GEN6_RPSTAT1);
+		rpupei = I915_READ(GEN6_RP_CUR_UP_EI);
+		rpcurup = I915_READ(GEN6_RP_CUR_UP);
+		rpprevup = I915_READ(GEN6_RP_PREV_UP);
+		rpdownei = I915_READ(GEN6_RP_CUR_DOWN_EI);
+		rpcurdown = I915_READ(GEN6_RP_CUR_DOWN);
+		rpprevdown = I915_READ(GEN6_RP_PREV_DOWN);
+
+		gen6_gt_force_wake_put(dev_priv);
+		mutex_unlock(&dev->struct_mutex);
+
+		seq_printf(m, "GT_PERF_STATUS: 0x%08x\n", gt_perf_status);
+		seq_printf(m, "RPSTAT1: 0x%08x\n", rpstat);
+		seq_printf(m, "Render p-state ratio: %d\n",
+			   (gt_perf_status & 0xff00) >> 8);
+		seq_printf(m, "Render p-state VID: %d\n",
+			   gt_perf_status & 0xff);
+		seq_printf(m, "Render p-state limit: %d\n",
+			   rp_state_limits & 0xff);
+		seq_printf(m, "CAGF: %dMHz\n", ((rpstat & GEN6_CAGF_MASK) >>
+						GEN6_CAGF_SHIFT) * 50);
+		seq_printf(m, "RP CUR UP EI: %dus\n", rpupei &
+			   GEN6_CURICONT_MASK);
+		seq_printf(m, "RP CUR UP: %dus\n", rpcurup &
+			   GEN6_CURBSYTAVG_MASK);
+		seq_printf(m, "RP PREV UP: %dus\n", rpprevup &
+			   GEN6_CURBSYTAVG_MASK);
+		seq_printf(m, "RP CUR DOWN EI: %dus\n", rpdownei &
+			   GEN6_CURIAVG_MASK);
+		seq_printf(m, "RP CUR DOWN: %dus\n", rpcurdown &
+			   GEN6_CURBSYTAVG_MASK);
+		seq_printf(m, "RP PREV DOWN: %dus\n", rpprevdown &
+			   GEN6_CURBSYTAVG_MASK);
+
+		max_freq = (rp_state_cap & 0xff0000) >> 16;
+		seq_printf(m, "Lowest (RPN) frequency: %dMHz\n",
+			   max_freq * 50);
+
+		max_freq = (rp_state_cap & 0xff00) >> 8;
+		seq_printf(m, "Nominal (RP1) frequency: %dMHz\n",
+			   max_freq * 50);
+
+		max_freq = rp_state_cap & 0xff;
+		seq_printf(m, "Max non-overclocked (RP0) frequency: %dMHz\n",
+			   max_freq * 50);
+	} else {
+		seq_printf(m, "no P-state info available\n");
+	}
+
+	return 0;
+}
+
+static int i915_delayfreq_table(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 delayfreq;
+	int ret, i;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < 16; i++) {
+		delayfreq = I915_READ(PXVFREQ_BASE + i * 4);
+		seq_printf(m, "P%02dVIDFREQ: 0x%08x (VID: %d)\n", i, delayfreq,
+			   (delayfreq & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT);
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static inline int MAP_TO_MV(int map)
+{
+	return 1250 - (map * 25);
+}
+
+static int i915_inttoext_table(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 inttoext;
+	int ret, i;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	for (i = 1; i <= 32; i++) {
+		inttoext = I915_READ(INTTOEXT_BASE_ILK + i * 4);
+		seq_printf(m, "INTTOEXT%02d: 0x%08x\n", i, inttoext);
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static int ironlake_drpc_info(struct seq_file *m)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 rgvmodectl, rstdbyctl;
+	u16 crstandvid;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	rgvmodectl = I915_READ(MEMMODECTL);
+	rstdbyctl = I915_READ(RSTDBYCTL);
+	crstandvid = I915_READ16(CRSTANDVID);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ?
+		   "yes" : "no");
+	seq_printf(m, "Boost freq: %d\n",
+		   (rgvmodectl & MEMMODE_BOOST_FREQ_MASK) >>
+		   MEMMODE_BOOST_FREQ_SHIFT);
+	seq_printf(m, "HW control enabled: %s\n",
+		   rgvmodectl & MEMMODE_HWIDLE_EN ? "yes" : "no");
+	seq_printf(m, "SW control enabled: %s\n",
+		   rgvmodectl & MEMMODE_SWMODE_EN ? "yes" : "no");
+	seq_printf(m, "Gated voltage change: %s\n",
+		   rgvmodectl & MEMMODE_RCLK_GATE ? "yes" : "no");
+	seq_printf(m, "Starting frequency: P%d\n",
+		   (rgvmodectl & MEMMODE_FSTART_MASK) >> MEMMODE_FSTART_SHIFT);
+	seq_printf(m, "Max P-state: P%d\n",
+		   (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT);
+	seq_printf(m, "Min P-state: P%d\n", (rgvmodectl & MEMMODE_FMIN_MASK));
+	seq_printf(m, "RS1 VID: %d\n", (crstandvid & 0x3f));
+	seq_printf(m, "RS2 VID: %d\n", ((crstandvid >> 8) & 0x3f));
+	seq_printf(m, "Render standby enabled: %s\n",
+		   (rstdbyctl & RCX_SW_EXIT) ? "no" : "yes");
+	seq_printf(m, "Current RS state: ");
+	switch (rstdbyctl & RSX_STATUS_MASK) {
+	case RSX_STATUS_ON:
+		seq_printf(m, "on\n");
+		break;
+	case RSX_STATUS_RC1:
+		seq_printf(m, "RC1\n");
+		break;
+	case RSX_STATUS_RC1E:
+		seq_printf(m, "RC1E\n");
+		break;
+	case RSX_STATUS_RS1:
+		seq_printf(m, "RS1\n");
+		break;
+	case RSX_STATUS_RS2:
+		seq_printf(m, "RS2 (RC6)\n");
+		break;
+	case RSX_STATUS_RS3:
+		seq_printf(m, "RC3 (RC6+)\n");
+		break;
+	default:
+		seq_printf(m, "unknown\n");
+		break;
+	}
+
+	return 0;
+}
+
+static int gen6_drpc_info(struct seq_file *m)
+{
+
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 rpmodectl1, gt_core_status, rcctl1;
+	unsigned forcewake_count;
+	int count=0, ret;
+
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	spin_lock_irq(&dev_priv->gt_lock);
+	forcewake_count = dev_priv->forcewake_count;
+	spin_unlock_irq(&dev_priv->gt_lock);
+
+	if (forcewake_count) {
+		seq_printf(m, "RC information inaccurate because somebody "
+			      "holds a forcewake reference \n");
+	} else {
+		/* NB: we cannot use forcewake, else we read the wrong values */
+		while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1))
+			udelay(10);
+		seq_printf(m, "RC information accurate: %s\n", yesno(count < 51));
+	}
+
+	gt_core_status = readl(dev_priv->regs + GEN6_GT_CORE_STATUS);
+	trace_i915_reg_rw(false, GEN6_GT_CORE_STATUS, gt_core_status, 4);
+
+	rpmodectl1 = I915_READ(GEN6_RP_CONTROL);
+	rcctl1 = I915_READ(GEN6_RC_CONTROL);
+	mutex_unlock(&dev->struct_mutex);
+
+	seq_printf(m, "Video Turbo Mode: %s\n",
+		   yesno(rpmodectl1 & GEN6_RP_MEDIA_TURBO));
+	seq_printf(m, "HW control enabled: %s\n",
+		   yesno(rpmodectl1 & GEN6_RP_ENABLE));
+	seq_printf(m, "SW control enabled: %s\n",
+		   yesno((rpmodectl1 & GEN6_RP_MEDIA_MODE_MASK) ==
+			  GEN6_RP_MEDIA_SW_MODE));
+	seq_printf(m, "RC1e Enabled: %s\n",
+		   yesno(rcctl1 & GEN6_RC_CTL_RC1e_ENABLE));
+	seq_printf(m, "RC6 Enabled: %s\n",
+		   yesno(rcctl1 & GEN6_RC_CTL_RC6_ENABLE));
+	seq_printf(m, "Deep RC6 Enabled: %s\n",
+		   yesno(rcctl1 & GEN6_RC_CTL_RC6p_ENABLE));
+	seq_printf(m, "Deepest RC6 Enabled: %s\n",
+		   yesno(rcctl1 & GEN6_RC_CTL_RC6pp_ENABLE));
+	seq_printf(m, "Current RC state: ");
+	switch (gt_core_status & GEN6_RCn_MASK) {
+	case GEN6_RC0:
+		if (gt_core_status & GEN6_CORE_CPD_STATE_MASK)
+			seq_printf(m, "Core Power Down\n");
+		else
+			seq_printf(m, "on\n");
+		break;
+	case GEN6_RC3:
+		seq_printf(m, "RC3\n");
+		break;
+	case GEN6_RC6:
+		seq_printf(m, "RC6\n");
+		break;
+	case GEN6_RC7:
+		seq_printf(m, "RC7\n");
+		break;
+	default:
+		seq_printf(m, "Unknown\n");
+		break;
+	}
+
+	seq_printf(m, "Core Power Down: %s\n",
+		   yesno(gt_core_status & GEN6_CORE_CPD_STATE_MASK));
+	return 0;
+}
+
+static int i915_drpc_info(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+
+	if (IS_GEN6(dev) || IS_GEN7(dev))
+		return gen6_drpc_info(m);
+	else
+		return ironlake_drpc_info(m);
+}
+
+static int i915_fbc_status(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (!I915_HAS_FBC(dev)) {
+		seq_printf(m, "FBC unsupported on this chipset\n");
+		return 0;
+	}
+
+	if (intel_fbc_enabled(dev)) {
+		seq_printf(m, "FBC enabled\n");
+	} else {
+		seq_printf(m, "FBC disabled: ");
+		switch (dev_priv->no_fbc_reason) {
+		case FBC_NO_OUTPUT:
+			seq_printf(m, "no outputs");
+			break;
+		case FBC_STOLEN_TOO_SMALL:
+			seq_printf(m, "not enough stolen memory");
+			break;
+		case FBC_UNSUPPORTED_MODE:
+			seq_printf(m, "mode not supported");
+			break;
+		case FBC_MODE_TOO_LARGE:
+			seq_printf(m, "mode too large");
+			break;
+		case FBC_BAD_PLANE:
+			seq_printf(m, "FBC unsupported on plane");
+			break;
+		case FBC_NOT_TILED:
+			seq_printf(m, "scanout buffer not tiled");
+			break;
+		case FBC_MULTIPLE_PIPES:
+			seq_printf(m, "multiple pipes are enabled");
+			break;
+		case FBC_MODULE_PARAM:
+			seq_printf(m, "disabled per module param (default off)");
+			break;
+		default:
+			seq_printf(m, "unknown reason");
+		}
+		seq_printf(m, "\n");
+	}
+	return 0;
+}
+
+static int i915_sr_status(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	bool sr_enabled = false;
+
+	if (HAS_PCH_SPLIT(dev))
+		sr_enabled = I915_READ(WM1_LP_ILK) & WM1_LP_SR_EN;
+	else if (IS_CRESTLINE(dev) || IS_I945G(dev) || IS_I945GM(dev))
+		sr_enabled = I915_READ(FW_BLC_SELF) & FW_BLC_SELF_EN;
+	else if (IS_I915GM(dev))
+		sr_enabled = I915_READ(INSTPM) & INSTPM_SELF_EN;
+	else if (IS_PINEVIEW(dev))
+		sr_enabled = I915_READ(DSPFW3) & PINEVIEW_SELF_REFRESH_EN;
+
+	seq_printf(m, "self-refresh: %s\n",
+		   sr_enabled ? "enabled" : "disabled");
+
+	return 0;
+}
+
+static int i915_emon_status(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	unsigned long temp, chipset, gfx;
+	int ret;
+
+	if (!IS_GEN5(dev))
+		return -ENODEV;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	temp = i915_mch_val(dev_priv);
+	chipset = i915_chipset_val(dev_priv);
+	gfx = i915_gfx_val(dev_priv);
+	mutex_unlock(&dev->struct_mutex);
+
+	seq_printf(m, "GMCH temp: %ld\n", temp);
+	seq_printf(m, "Chipset power: %ld\n", chipset);
+	seq_printf(m, "GFX power: %ld\n", gfx);
+	seq_printf(m, "Total power: %ld\n", chipset + gfx);
+
+	return 0;
+}
+
+static int i915_ring_freq_table(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+	int gpu_freq, ia_freq;
+
+	if (!(IS_GEN6(dev) || IS_GEN7(dev))) {
+		seq_printf(m, "unsupported on this chipset\n");
+		return 0;
+	}
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	seq_printf(m, "GPU freq (MHz)\tEffective CPU freq (MHz)\n");
+
+	for (gpu_freq = dev_priv->min_delay; gpu_freq <= dev_priv->max_delay;
+	     gpu_freq++) {
+		I915_WRITE(GEN6_PCODE_DATA, gpu_freq);
+		I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY |
+			   GEN6_PCODE_READ_MIN_FREQ_TABLE);
+		if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) &
+			      GEN6_PCODE_READY) == 0, 10)) {
+			DRM_ERROR("pcode read of freq table timed out\n");
+			continue;
+		}
+		ia_freq = I915_READ(GEN6_PCODE_DATA);
+		seq_printf(m, "%d\t\t%d\n", gpu_freq * 50, ia_freq * 100);
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static int i915_gfxec(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	seq_printf(m, "GFXEC: %ld\n", (unsigned long)I915_READ(0x112f4));
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static int i915_opregion(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	if (opregion->header)
+		seq_write(m, opregion->header, OPREGION_SIZE);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static int i915_gem_framebuffer_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_fbdev *ifbdev;
+	struct intel_framebuffer *fb;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->mode_config.mutex);
+	if (ret)
+		return ret;
+
+	ifbdev = dev_priv->fbdev;
+	fb = to_intel_framebuffer(ifbdev->helper.fb);
+
+	seq_printf(m, "fbcon size: %d x %d, depth %d, %d bpp, obj ",
+		   fb->base.width,
+		   fb->base.height,
+		   fb->base.depth,
+		   fb->base.bits_per_pixel);
+	describe_obj(m, fb->obj);
+	seq_printf(m, "\n");
+
+	list_for_each_entry(fb, &dev->mode_config.fb_list, base.head) {
+		if (&fb->base == ifbdev->helper.fb)
+			continue;
+
+		seq_printf(m, "user size: %d x %d, depth %d, %d bpp, obj ",
+			   fb->base.width,
+			   fb->base.height,
+			   fb->base.depth,
+			   fb->base.bits_per_pixel);
+		describe_obj(m, fb->obj);
+		seq_printf(m, "\n");
+	}
+
+	mutex_unlock(&dev->mode_config.mutex);
+
+	return 0;
+}
+
+static int i915_context_status(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->mode_config.mutex);
+	if (ret)
+		return ret;
+
+	if (dev_priv->pwrctx) {
+		seq_printf(m, "power context ");
+		describe_obj(m, dev_priv->pwrctx);
+		seq_printf(m, "\n");
+	}
+
+	if (dev_priv->renderctx) {
+		seq_printf(m, "render context ");
+		describe_obj(m, dev_priv->renderctx);
+		seq_printf(m, "\n");
+	}
+
+	mutex_unlock(&dev->mode_config.mutex);
+
+	return 0;
+}
+
+static int i915_gen6_forcewake_count_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned forcewake_count;
+
+	spin_lock_irq(&dev_priv->gt_lock);
+	forcewake_count = dev_priv->forcewake_count;
+	spin_unlock_irq(&dev_priv->gt_lock);
+
+	seq_printf(m, "forcewake count = %u\n", forcewake_count);
+
+	return 0;
+}
+
+static const char *swizzle_string(unsigned swizzle)
+{
+	switch(swizzle) {
+	case I915_BIT_6_SWIZZLE_NONE:
+		return "none";
+	case I915_BIT_6_SWIZZLE_9:
+		return "bit9";
+	case I915_BIT_6_SWIZZLE_9_10:
+		return "bit9/bit10";
+	case I915_BIT_6_SWIZZLE_9_11:
+		return "bit9/bit11";
+	case I915_BIT_6_SWIZZLE_9_10_11:
+		return "bit9/bit10/bit11";
+	case I915_BIT_6_SWIZZLE_9_17:
+		return "bit9/bit17";
+	case I915_BIT_6_SWIZZLE_9_10_17:
+		return "bit9/bit10/bit17";
+	case I915_BIT_6_SWIZZLE_UNKNOWN:
+		return "unkown";
+	}
+
+	return "bug";
+}
+
+static int i915_swizzle_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	mutex_lock(&dev->struct_mutex);
+	seq_printf(m, "bit6 swizzle for X-tiling = %s\n",
+		   swizzle_string(dev_priv->mm.bit_6_swizzle_x));
+	seq_printf(m, "bit6 swizzle for Y-tiling = %s\n",
+		   swizzle_string(dev_priv->mm.bit_6_swizzle_y));
+
+	if (IS_GEN3(dev) || IS_GEN4(dev)) {
+		seq_printf(m, "DDC = 0x%08x\n",
+			   I915_READ(DCC));
+		seq_printf(m, "C0DRB3 = 0x%04x\n",
+			   I915_READ16(C0DRB3));
+		seq_printf(m, "C1DRB3 = 0x%04x\n",
+			   I915_READ16(C1DRB3));
+	} else if (IS_GEN6(dev) || IS_GEN7(dev)) {
+		seq_printf(m, "MAD_DIMM_C0 = 0x%08x\n",
+			   I915_READ(MAD_DIMM_C0));
+		seq_printf(m, "MAD_DIMM_C1 = 0x%08x\n",
+			   I915_READ(MAD_DIMM_C1));
+		seq_printf(m, "MAD_DIMM_C2 = 0x%08x\n",
+			   I915_READ(MAD_DIMM_C2));
+		seq_printf(m, "TILECTL = 0x%08x\n",
+			   I915_READ(TILECTL));
+		seq_printf(m, "ARB_MODE = 0x%08x\n",
+			   I915_READ(ARB_MODE));
+		seq_printf(m, "DISP_ARB_CTL = 0x%08x\n",
+			   I915_READ(DISP_ARB_CTL));
+	}
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static int i915_ppgtt_info(struct seq_file *m, void *data)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring;
+	int i, ret;
+
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+	if (INTEL_INFO(dev)->gen == 6)
+		seq_printf(m, "GFX_MODE: 0x%08x\n", I915_READ(GFX_MODE));
+
+	for (i = 0; i < I915_NUM_RINGS; i++) {
+		ring = &dev_priv->ring[i];
+
+		seq_printf(m, "%s\n", ring->name);
+		if (INTEL_INFO(dev)->gen == 7)
+			seq_printf(m, "GFX_MODE: 0x%08x\n", I915_READ(RING_MODE_GEN7(ring)));
+		seq_printf(m, "PP_DIR_BASE: 0x%08x\n", I915_READ(RING_PP_DIR_BASE(ring)));
+		seq_printf(m, "PP_DIR_BASE_READ: 0x%08x\n", I915_READ(RING_PP_DIR_BASE_READ(ring)));
+		seq_printf(m, "PP_DIR_DCLV: 0x%08x\n", I915_READ(RING_PP_DIR_DCLV(ring)));
+	}
+	if (dev_priv->mm.aliasing_ppgtt) {
+		struct i915_hw_ppgtt *ppgtt = dev_priv->mm.aliasing_ppgtt;
+
+		seq_printf(m, "aliasing PPGTT:\n");
+		seq_printf(m, "pd gtt offset: 0x%08x\n", ppgtt->pd_offset);
+	}
+	seq_printf(m, "ECOCHK: 0x%08x\n", I915_READ(GAM_ECOCHK));
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static ssize_t
+i915_wedged_read(struct file *filp,
+		 char __user *ubuf,
+		 size_t max,
+		 loff_t *ppos)
+{
+	struct drm_device *dev = filp->private_data;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	char buf[80];
+	int len;
+
+	len = snprintf(buf, sizeof(buf),
+		       "wedged :  %d\n",
+		       atomic_read(&dev_priv->mm.wedged));
+
+	if (len > sizeof(buf))
+		len = sizeof(buf);
+
+	return simple_read_from_buffer(ubuf, max, ppos, buf, len);
+}
+
+static ssize_t
+i915_wedged_write(struct file *filp,
+		  const char __user *ubuf,
+		  size_t cnt,
+		  loff_t *ppos)
+{
+	struct drm_device *dev = filp->private_data;
+	char buf[20];
+	int val = 1;
+
+	if (cnt > 0) {
+		if (cnt > sizeof(buf) - 1)
+			return -EINVAL;
+
+		if (copy_from_user(buf, ubuf, cnt))
+			return -EFAULT;
+		buf[cnt] = 0;
+
+		val = simple_strtoul(buf, NULL, 0);
+	}
+
+	DRM_INFO("Manually setting wedged to %d\n", val);
+	i915_handle_error(dev, val);
+
+	return cnt;
+}
+
+static const struct file_operations i915_wedged_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read = i915_wedged_read,
+	.write = i915_wedged_write,
+	.llseek = default_llseek,
+};
+
+static ssize_t
+i915_max_freq_read(struct file *filp,
+		   char __user *ubuf,
+		   size_t max,
+		   loff_t *ppos)
+{
+	struct drm_device *dev = filp->private_data;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	char buf[80];
+	int len;
+
+	len = snprintf(buf, sizeof(buf),
+		       "max freq: %d\n", dev_priv->max_delay * 50);
+
+	if (len > sizeof(buf))
+		len = sizeof(buf);
+
+	return simple_read_from_buffer(ubuf, max, ppos, buf, len);
+}
+
+static ssize_t
+i915_max_freq_write(struct file *filp,
+		  const char __user *ubuf,
+		  size_t cnt,
+		  loff_t *ppos)
+{
+	struct drm_device *dev = filp->private_data;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	char buf[20];
+	int val = 1;
+
+	if (cnt > 0) {
+		if (cnt > sizeof(buf) - 1)
+			return -EINVAL;
+
+		if (copy_from_user(buf, ubuf, cnt))
+			return -EFAULT;
+		buf[cnt] = 0;
+
+		val = simple_strtoul(buf, NULL, 0);
+	}
+
+	DRM_DEBUG_DRIVER("Manually setting max freq to %d\n", val);
+
+	/*
+	 * Turbo will still be enabled, but won't go above the set value.
+	 */
+	dev_priv->max_delay = val / 50;
+
+	gen6_set_rps(dev, val / 50);
+
+	return cnt;
+}
+
+static const struct file_operations i915_max_freq_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read = i915_max_freq_read,
+	.write = i915_max_freq_write,
+	.llseek = default_llseek,
+};
+
+static ssize_t
+i915_cache_sharing_read(struct file *filp,
+		   char __user *ubuf,
+		   size_t max,
+		   loff_t *ppos)
+{
+	struct drm_device *dev = filp->private_data;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	char buf[80];
+	u32 snpcr;
+	int len;
+
+	mutex_lock(&dev_priv->dev->struct_mutex);
+	snpcr = I915_READ(GEN6_MBCUNIT_SNPCR);
+	mutex_unlock(&dev_priv->dev->struct_mutex);
+
+	len = snprintf(buf, sizeof(buf),
+		       "%d\n", (snpcr & GEN6_MBC_SNPCR_MASK) >>
+		       GEN6_MBC_SNPCR_SHIFT);
+
+	if (len > sizeof(buf))
+		len = sizeof(buf);
+
+	return simple_read_from_buffer(ubuf, max, ppos, buf, len);
+}
+
+static ssize_t
+i915_cache_sharing_write(struct file *filp,
+		  const char __user *ubuf,
+		  size_t cnt,
+		  loff_t *ppos)
+{
+	struct drm_device *dev = filp->private_data;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	char buf[20];
+	u32 snpcr;
+	int val = 1;
+
+	if (cnt > 0) {
+		if (cnt > sizeof(buf) - 1)
+			return -EINVAL;
+
+		if (copy_from_user(buf, ubuf, cnt))
+			return -EFAULT;
+		buf[cnt] = 0;
+
+		val = simple_strtoul(buf, NULL, 0);
+	}
+
+	if (val < 0 || val > 3)
+		return -EINVAL;
+
+	DRM_DEBUG_DRIVER("Manually setting uncore sharing to %d\n", val);
+
+	/* Update the cache sharing policy here as well */
+	snpcr = I915_READ(GEN6_MBCUNIT_SNPCR);
+	snpcr &= ~GEN6_MBC_SNPCR_MASK;
+	snpcr |= (val << GEN6_MBC_SNPCR_SHIFT);
+	I915_WRITE(GEN6_MBCUNIT_SNPCR, snpcr);
+
+	return cnt;
+}
+
+static const struct file_operations i915_cache_sharing_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.read = i915_cache_sharing_read,
+	.write = i915_cache_sharing_write,
+	.llseek = default_llseek,
+};
+
+/* As the drm_debugfs_init() routines are called before dev->dev_private is
+ * allocated we need to hook into the minor for release. */
+static int
+drm_add_fake_info_node(struct drm_minor *minor,
+		       struct dentry *ent,
+		       const void *key)
+{
+	struct drm_info_node *node;
+
+	node = kmalloc(sizeof(struct drm_info_node), GFP_KERNEL);
+	if (node == NULL) {
+		debugfs_remove(ent);
+		return -ENOMEM;
+	}
+
+	node->minor = minor;
+	node->dent = ent;
+	node->info_ent = (void *) key;
+
+	mutex_lock(&minor->debugfs_lock);
+	list_add(&node->list, &minor->debugfs_list);
+	mutex_unlock(&minor->debugfs_lock);
+
+	return 0;
+}
+
+static int i915_forcewake_open(struct inode *inode, struct file *file)
+{
+	struct drm_device *dev = inode->i_private;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	if (INTEL_INFO(dev)->gen < 6)
+		return 0;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+	gen6_gt_force_wake_get(dev_priv);
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+int i915_forcewake_release(struct inode *inode, struct file *file)
+{
+	struct drm_device *dev = inode->i_private;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (INTEL_INFO(dev)->gen < 6)
+		return 0;
+
+	/*
+	 * It's bad that we can potentially hang userspace if struct_mutex gets
+	 * forever stuck.  However, if we cannot acquire this lock it means that
+	 * almost certainly the driver has hung, is not unload-able. Therefore
+	 * hanging here is probably a minor inconvenience not to be seen my
+	 * almost every user.
+	 */
+	mutex_lock(&dev->struct_mutex);
+	gen6_gt_force_wake_put(dev_priv);
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static const struct file_operations i915_forcewake_fops = {
+	.owner = THIS_MODULE,
+	.open = i915_forcewake_open,
+	.release = i915_forcewake_release,
+};
+
+static int i915_forcewake_create(struct dentry *root, struct drm_minor *minor)
+{
+	struct drm_device *dev = minor->dev;
+	struct dentry *ent;
+
+	ent = debugfs_create_file("i915_forcewake_user",
+				  S_IRUSR,
+				  root, dev,
+				  &i915_forcewake_fops);
+	if (IS_ERR(ent))
+		return PTR_ERR(ent);
+
+	return drm_add_fake_info_node(minor, ent, &i915_forcewake_fops);
+}
+
+static int i915_debugfs_create(struct dentry *root,
+			       struct drm_minor *minor,
+			       const char *name,
+			       const struct file_operations *fops)
+{
+	struct drm_device *dev = minor->dev;
+	struct dentry *ent;
+
+	ent = debugfs_create_file(name,
+				  S_IRUGO | S_IWUSR,
+				  root, dev,
+				  fops);
+	if (IS_ERR(ent))
+		return PTR_ERR(ent);
+
+	return drm_add_fake_info_node(minor, ent, fops);
+}
+
+static struct drm_info_list i915_debugfs_list[] = {
+	{"i915_capabilities", i915_capabilities, 0},
+	{"i915_gem_objects", i915_gem_object_info, 0},
+	{"i915_gem_gtt", i915_gem_gtt_info, 0},
+	{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
+	{"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST},
+	{"i915_gem_inactive", i915_gem_object_list_info, 0, (void *) INACTIVE_LIST},
+	{"i915_gem_pinned", i915_gem_object_list_info, 0, (void *) PINNED_LIST},
+	{"i915_gem_deferred_free", i915_gem_object_list_info, 0, (void *) DEFERRED_FREE_LIST},
+	{"i915_gem_pageflip", i915_gem_pageflip_info, 0},
+	{"i915_gem_request", i915_gem_request_info, 0},
+	{"i915_gem_seqno", i915_gem_seqno_info, 0},
+	{"i915_gem_fence_regs", i915_gem_fence_regs_info, 0},
+	{"i915_gem_interrupt", i915_interrupt_info, 0},
+	{"i915_gem_hws", i915_hws_info, 0, (void *)RCS},
+	{"i915_gem_hws_blt", i915_hws_info, 0, (void *)BCS},
+	{"i915_gem_hws_bsd", i915_hws_info, 0, (void *)VCS},
+	{"i915_ringbuffer_data", i915_ringbuffer_data, 0, (void *)RCS},
+	{"i915_ringbuffer_info", i915_ringbuffer_info, 0, (void *)RCS},
+	{"i915_bsd_ringbuffer_data", i915_ringbuffer_data, 0, (void *)VCS},
+	{"i915_bsd_ringbuffer_info", i915_ringbuffer_info, 0, (void *)VCS},
+	{"i915_blt_ringbuffer_data", i915_ringbuffer_data, 0, (void *)BCS},
+	{"i915_blt_ringbuffer_info", i915_ringbuffer_info, 0, (void *)BCS},
+	{"i915_error_state", i915_error_state, 0},
+	{"i915_rstdby_delays", i915_rstdby_delays, 0},
+	{"i915_cur_delayinfo", i915_cur_delayinfo, 0},
+	{"i915_delayfreq_table", i915_delayfreq_table, 0},
+	{"i915_inttoext_table", i915_inttoext_table, 0},
+	{"i915_drpc_info", i915_drpc_info, 0},
+	{"i915_emon_status", i915_emon_status, 0},
+	{"i915_ring_freq_table", i915_ring_freq_table, 0},
+	{"i915_gfxec", i915_gfxec, 0},
+	{"i915_fbc_status", i915_fbc_status, 0},
+	{"i915_sr_status", i915_sr_status, 0},
+	{"i915_opregion", i915_opregion, 0},
+	{"i915_gem_framebuffer", i915_gem_framebuffer_info, 0},
+	{"i915_context_status", i915_context_status, 0},
+	{"i915_gen6_forcewake_count", i915_gen6_forcewake_count_info, 0},
+	{"i915_swizzle_info", i915_swizzle_info, 0},
+	{"i915_ppgtt_info", i915_ppgtt_info, 0},
+};
+#define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)
+
+int i915_debugfs_init(struct drm_minor *minor)
+{
+	int ret;
+
+	ret = i915_debugfs_create(minor->debugfs_root, minor,
+				  "i915_wedged",
+				  &i915_wedged_fops);
+	if (ret)
+		return ret;
+
+	ret = i915_forcewake_create(minor->debugfs_root, minor);
+	if (ret)
+		return ret;
+
+	ret = i915_debugfs_create(minor->debugfs_root, minor,
+				  "i915_max_freq",
+				  &i915_max_freq_fops);
+	if (ret)
+		return ret;
+
+	ret = i915_debugfs_create(minor->debugfs_root, minor,
+				  "i915_cache_sharing",
+				  &i915_cache_sharing_fops);
+	if (ret)
+		return ret;
+
+	return drm_debugfs_create_files(i915_debugfs_list,
+					I915_DEBUGFS_ENTRIES,
+					minor->debugfs_root, minor);
+}
+
+void i915_debugfs_cleanup(struct drm_minor *minor)
+{
+	drm_debugfs_remove_files(i915_debugfs_list,
+				 I915_DEBUGFS_ENTRIES, minor);
+	drm_debugfs_remove_files((struct drm_info_list *) &i915_forcewake_fops,
+				 1, minor);
+	drm_debugfs_remove_files((struct drm_info_list *) &i915_wedged_fops,
+				 1, minor);
+	drm_debugfs_remove_files((struct drm_info_list *) &i915_max_freq_fops,
+				 1, minor);
+	drm_debugfs_remove_files((struct drm_info_list *) &i915_cache_sharing_fops,
+				 1, minor);
+}
+
+#endif /* CONFIG_DEBUG_FS */
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
new file mode 100644
index 00000000..ba60f3c8
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -0,0 +1,2372 @@
+/* i915_dma.c -- DMA support for the I915 -*- linux-c -*-
+ */
+/*
+ * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "i915_trace.h"
+#include "../../../platform/x86/intel_ips.h"
+#include <linux/pci.h>
+#include <linux/vgaarb.h>
+#include <linux/acpi.h>
+#include <linux/pnp.h>
+#include <linux/vga_switcheroo.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <acpi/video.h>
+
+static void i915_write_hws_pga(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 addr;
+
+	addr = dev_priv->status_page_dmah->busaddr;
+	if (INTEL_INFO(dev)->gen >= 4)
+		addr |= (dev_priv->status_page_dmah->busaddr >> 28) & 0xf0;
+	I915_WRITE(HWS_PGA, addr);
+}
+
+/**
+ * Sets up the hardware status page for devices that need a physical address
+ * in the register.
+ */
+static int i915_init_phys_hws(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	/* Program Hardware Status Page */
+	dev_priv->status_page_dmah =
+		drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE);
+
+	if (!dev_priv->status_page_dmah) {
+		DRM_ERROR("Can not allocate hardware status page\n");
+		return -ENOMEM;
+	}
+
+	memset_io((void __force __iomem *)dev_priv->status_page_dmah->vaddr,
+		  0, PAGE_SIZE);
+
+	i915_write_hws_pga(dev);
+
+	DRM_DEBUG_DRIVER("Enabled hardware status page\n");
+	return 0;
+}
+
+/**
+ * Frees the hardware status page, whether it's a physical address or a virtual
+ * address set up by the X Server.
+ */
+static void i915_free_hws(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = LP_RING(dev_priv);
+
+	if (dev_priv->status_page_dmah) {
+		drm_pci_free(dev, dev_priv->status_page_dmah);
+		dev_priv->status_page_dmah = NULL;
+	}
+
+	if (ring->status_page.gfx_addr) {
+		ring->status_page.gfx_addr = 0;
+		drm_core_ioremapfree(&dev_priv->hws_map, dev);
+	}
+
+	/* Need to rewrite hardware status page */
+	I915_WRITE(HWS_PGA, 0x1ffff000);
+}
+
+void i915_kernel_lost_context(struct drm_device * dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_master_private *master_priv;
+	struct intel_ring_buffer *ring = LP_RING(dev_priv);
+
+	/*
+	 * We should never lose context on the ring with modesetting
+	 * as we don't expose it to userspace
+	 */
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return;
+
+	ring->head = I915_READ_HEAD(ring) & HEAD_ADDR;
+	ring->tail = I915_READ_TAIL(ring) & TAIL_ADDR;
+	ring->space = ring->head - (ring->tail + 8);
+	if (ring->space < 0)
+		ring->space += ring->size;
+
+	if (!dev->primary->master)
+		return;
+
+	master_priv = dev->primary->master->driver_priv;
+	if (ring->head == ring->tail && master_priv->sarea_priv)
+		master_priv->sarea_priv->perf_boxes |= I915_BOX_RING_EMPTY;
+}
+
+static int i915_dma_cleanup(struct drm_device * dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int i;
+
+	/* Make sure interrupts are disabled here because the uninstall ioctl
+	 * may not have been called from userspace and after dev_private
+	 * is freed, it's too late.
+	 */
+	if (dev->irq_enabled)
+		drm_irq_uninstall(dev);
+
+	mutex_lock(&dev->struct_mutex);
+	for (i = 0; i < I915_NUM_RINGS; i++)
+		intel_cleanup_ring_buffer(&dev_priv->ring[i]);
+	mutex_unlock(&dev->struct_mutex);
+
+	/* Clear the HWS virtual address at teardown */
+	if (I915_NEED_GFX_HWS(dev))
+		i915_free_hws(dev);
+
+	return 0;
+}
+
+static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
+	int ret;
+
+	master_priv->sarea = drm_getsarea(dev);
+	if (master_priv->sarea) {
+		master_priv->sarea_priv = (drm_i915_sarea_t *)
+			((u8 *)master_priv->sarea->handle + init->sarea_priv_offset);
+	} else {
+		DRM_DEBUG_DRIVER("sarea not found assuming DRI2 userspace\n");
+	}
+
+	if (init->ring_size != 0) {
+		if (LP_RING(dev_priv)->obj != NULL) {
+			i915_dma_cleanup(dev);
+			DRM_ERROR("Client tried to initialize ringbuffer in "
+				  "GEM mode\n");
+			return -EINVAL;
+		}
+
+		ret = intel_render_ring_init_dri(dev,
+						 init->ring_start,
+						 init->ring_size);
+		if (ret) {
+			i915_dma_cleanup(dev);
+			return ret;
+		}
+	}
+
+	dev_priv->cpp = init->cpp;
+	dev_priv->back_offset = init->back_offset;
+	dev_priv->front_offset = init->front_offset;
+	dev_priv->current_page = 0;
+	if (master_priv->sarea_priv)
+		master_priv->sarea_priv->pf_current_page = 0;
+
+	/* Allow hardware batchbuffers unless told otherwise.
+	 */
+	dev_priv->allow_batchbuffer = 1;
+
+	return 0;
+}
+
+static int i915_dma_resume(struct drm_device * dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	struct intel_ring_buffer *ring = LP_RING(dev_priv);
+
+	DRM_DEBUG_DRIVER("%s\n", __func__);
+
+	if (ring->map.handle == NULL) {
+		DRM_ERROR("can not ioremap virtual address for"
+			  " ring buffer\n");
+		return -ENOMEM;
+	}
+
+	/* Program Hardware Status Page */
+	if (!ring->status_page.page_addr) {
+		DRM_ERROR("Can not find hardware status page\n");
+		return -EINVAL;
+	}
+	DRM_DEBUG_DRIVER("hw status page @ %p\n",
+				ring->status_page.page_addr);
+	if (ring->status_page.gfx_addr != 0)
+		intel_ring_setup_status_page(ring);
+	else
+		i915_write_hws_pga(dev);
+
+	DRM_DEBUG_DRIVER("Enabled hardware status page\n");
+
+	return 0;
+}
+
+static int i915_dma_init(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv)
+{
+	drm_i915_init_t *init = data;
+	int retcode = 0;
+
+	switch (init->func) {
+	case I915_INIT_DMA:
+		retcode = i915_initialize(dev, init);
+		break;
+	case I915_CLEANUP_DMA:
+		retcode = i915_dma_cleanup(dev);
+		break;
+	case I915_RESUME_DMA:
+		retcode = i915_dma_resume(dev);
+		break;
+	default:
+		retcode = -EINVAL;
+		break;
+	}
+
+	return retcode;
+}
+
+/* Implement basically the same security restrictions as hardware does
+ * for MI_BATCH_NON_SECURE.  These can be made stricter at any time.
+ *
+ * Most of the calculations below involve calculating the size of a
+ * particular instruction.  It's important to get the size right as
+ * that tells us where the next instruction to check is.  Any illegal
+ * instruction detected will be given a size of zero, which is a
+ * signal to abort the rest of the buffer.
+ */
+static int validate_cmd(int cmd)
+{
+	switch (((cmd >> 29) & 0x7)) {
+	case 0x0:
+		switch ((cmd >> 23) & 0x3f) {
+		case 0x0:
+			return 1;	/* MI_NOOP */
+		case 0x4:
+			return 1;	/* MI_FLUSH */
+		default:
+			return 0;	/* disallow everything else */
+		}
+		break;
+	case 0x1:
+		return 0;	/* reserved */
+	case 0x2:
+		return (cmd & 0xff) + 2;	/* 2d commands */
+	case 0x3:
+		if (((cmd >> 24) & 0x1f) <= 0x18)
+			return 1;
+
+		switch ((cmd >> 24) & 0x1f) {
+		case 0x1c:
+			return 1;
+		case 0x1d:
+			switch ((cmd >> 16) & 0xff) {
+			case 0x3:
+				return (cmd & 0x1f) + 2;
+			case 0x4:
+				return (cmd & 0xf) + 2;
+			default:
+				return (cmd & 0xffff) + 2;
+			}
+		case 0x1e:
+			if (cmd & (1 << 23))
+				return (cmd & 0xffff) + 1;
+			else
+				return 1;
+		case 0x1f:
+			if ((cmd & (1 << 23)) == 0)	/* inline vertices */
+				return (cmd & 0x1ffff) + 2;
+			else if (cmd & (1 << 17))	/* indirect random */
+				if ((cmd & 0xffff) == 0)
+					return 0;	/* unknown length, too hard */
+				else
+					return (((cmd & 0xffff) + 1) / 2) + 1;
+			else
+				return 2;	/* indirect sequential */
+		default:
+			return 0;
+		}
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+static int i915_emit_cmds(struct drm_device * dev, int *buffer, int dwords)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int i, ret;
+
+	if ((dwords+1) * sizeof(int) >= LP_RING(dev_priv)->size - 8)
+		return -EINVAL;
+
+	for (i = 0; i < dwords;) {
+		int sz = validate_cmd(buffer[i]);
+		if (sz == 0 || i + sz > dwords)
+			return -EINVAL;
+		i += sz;
+	}
+
+	ret = BEGIN_LP_RING((dwords+1)&~1);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < dwords; i++)
+		OUT_RING(buffer[i]);
+	if (dwords & 1)
+		OUT_RING(0);
+
+	ADVANCE_LP_RING();
+
+	return 0;
+}
+
+int
+i915_emit_box(struct drm_device *dev,
+	      struct drm_clip_rect *box,
+	      int DR1, int DR4)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	if (box->y2 <= box->y1 || box->x2 <= box->x1 ||
+	    box->y2 <= 0 || box->x2 <= 0) {
+		DRM_ERROR("Bad box %d,%d..%d,%d\n",
+			  box->x1, box->y1, box->x2, box->y2);
+		return -EINVAL;
+	}
+
+	if (INTEL_INFO(dev)->gen >= 4) {
+		ret = BEGIN_LP_RING(4);
+		if (ret)
+			return ret;
+
+		OUT_RING(GFX_OP_DRAWRECT_INFO_I965);
+		OUT_RING((box->x1 & 0xffff) | (box->y1 << 16));
+		OUT_RING(((box->x2 - 1) & 0xffff) | ((box->y2 - 1) << 16));
+		OUT_RING(DR4);
+	} else {
+		ret = BEGIN_LP_RING(6);
+		if (ret)
+			return ret;
+
+		OUT_RING(GFX_OP_DRAWRECT_INFO);
+		OUT_RING(DR1);
+		OUT_RING((box->x1 & 0xffff) | (box->y1 << 16));
+		OUT_RING(((box->x2 - 1) & 0xffff) | ((box->y2 - 1) << 16));
+		OUT_RING(DR4);
+		OUT_RING(0);
+	}
+	ADVANCE_LP_RING();
+
+	return 0;
+}
+
+/* XXX: Emitting the counter should really be moved to part of the IRQ
+ * emit. For now, do it in both places:
+ */
+
+static void i915_emit_breadcrumb(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
+
+	dev_priv->counter++;
+	if (dev_priv->counter > 0x7FFFFFFFUL)
+		dev_priv->counter = 0;
+	if (master_priv->sarea_priv)
+		master_priv->sarea_priv->last_enqueue = dev_priv->counter;
+
+	if (BEGIN_LP_RING(4) == 0) {
+		OUT_RING(MI_STORE_DWORD_INDEX);
+		OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+		OUT_RING(dev_priv->counter);
+		OUT_RING(0);
+		ADVANCE_LP_RING();
+	}
+}
+
+static int i915_dispatch_cmdbuffer(struct drm_device * dev,
+				   drm_i915_cmdbuffer_t *cmd,
+				   struct drm_clip_rect *cliprects,
+				   void *cmdbuf)
+{
+	int nbox = cmd->num_cliprects;
+	int i = 0, count, ret;
+
+	if (cmd->sz & 0x3) {
+		DRM_ERROR("alignment");
+		return -EINVAL;
+	}
+
+	i915_kernel_lost_context(dev);
+
+	count = nbox ? nbox : 1;
+
+	for (i = 0; i < count; i++) {
+		if (i < nbox) {
+			ret = i915_emit_box(dev, &cliprects[i],
+					    cmd->DR1, cmd->DR4);
+			if (ret)
+				return ret;
+		}
+
+		ret = i915_emit_cmds(dev, cmdbuf, cmd->sz / 4);
+		if (ret)
+			return ret;
+	}
+
+	i915_emit_breadcrumb(dev);
+	return 0;
+}
+
+static int i915_dispatch_batchbuffer(struct drm_device * dev,
+				     drm_i915_batchbuffer_t * batch,
+				     struct drm_clip_rect *cliprects)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int nbox = batch->num_cliprects;
+	int i, count, ret;
+
+	if ((batch->start | batch->used) & 0x7) {
+		DRM_ERROR("alignment");
+		return -EINVAL;
+	}
+
+	i915_kernel_lost_context(dev);
+
+	count = nbox ? nbox : 1;
+	for (i = 0; i < count; i++) {
+		if (i < nbox) {
+			ret = i915_emit_box(dev, &cliprects[i],
+					    batch->DR1, batch->DR4);
+			if (ret)
+				return ret;
+		}
+
+		if (!IS_I830(dev) && !IS_845G(dev)) {
+			ret = BEGIN_LP_RING(2);
+			if (ret)
+				return ret;
+
+			if (INTEL_INFO(dev)->gen >= 4) {
+				OUT_RING(MI_BATCH_BUFFER_START | (2 << 6) | MI_BATCH_NON_SECURE_I965);
+				OUT_RING(batch->start);
+			} else {
+				OUT_RING(MI_BATCH_BUFFER_START | (2 << 6));
+				OUT_RING(batch->start | MI_BATCH_NON_SECURE);
+			}
+		} else {
+			ret = BEGIN_LP_RING(4);
+			if (ret)
+				return ret;
+
+			OUT_RING(MI_BATCH_BUFFER);
+			OUT_RING(batch->start | MI_BATCH_NON_SECURE);
+			OUT_RING(batch->start + batch->used - 4);
+			OUT_RING(0);
+		}
+		ADVANCE_LP_RING();
+	}
+
+
+	if (IS_G4X(dev) || IS_GEN5(dev)) {
+		if (BEGIN_LP_RING(2) == 0) {
+			OUT_RING(MI_FLUSH | MI_NO_WRITE_FLUSH | MI_INVALIDATE_ISP);
+			OUT_RING(MI_NOOP);
+			ADVANCE_LP_RING();
+		}
+	}
+
+	i915_emit_breadcrumb(dev);
+	return 0;
+}
+
+static int i915_dispatch_flip(struct drm_device * dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_master_private *master_priv =
+		dev->primary->master->driver_priv;
+	int ret;
+
+	if (!master_priv->sarea_priv)
+		return -EINVAL;
+
+	DRM_DEBUG_DRIVER("%s: page=%d pfCurrentPage=%d\n",
+			  __func__,
+			 dev_priv->current_page,
+			 master_priv->sarea_priv->pf_current_page);
+
+	i915_kernel_lost_context(dev);
+
+	ret = BEGIN_LP_RING(10);
+	if (ret)
+		return ret;
+
+	OUT_RING(MI_FLUSH | MI_READ_FLUSH);
+	OUT_RING(0);
+
+	OUT_RING(CMD_OP_DISPLAYBUFFER_INFO | ASYNC_FLIP);
+	OUT_RING(0);
+	if (dev_priv->current_page == 0) {
+		OUT_RING(dev_priv->back_offset);
+		dev_priv->current_page = 1;
+	} else {
+		OUT_RING(dev_priv->front_offset);
+		dev_priv->current_page = 0;
+	}
+	OUT_RING(0);
+
+	OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_PLANE_A_FLIP);
+	OUT_RING(0);
+
+	ADVANCE_LP_RING();
+
+	master_priv->sarea_priv->last_enqueue = dev_priv->counter++;
+
+	if (BEGIN_LP_RING(4) == 0) {
+		OUT_RING(MI_STORE_DWORD_INDEX);
+		OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+		OUT_RING(dev_priv->counter);
+		OUT_RING(0);
+		ADVANCE_LP_RING();
+	}
+
+	master_priv->sarea_priv->pf_current_page = dev_priv->current_page;
+	return 0;
+}
+
+static int i915_quiescent(struct drm_device *dev)
+{
+	struct intel_ring_buffer *ring = LP_RING(dev->dev_private);
+
+	i915_kernel_lost_context(dev);
+	return intel_wait_ring_idle(ring);
+}
+
+static int i915_flush_ioctl(struct drm_device *dev, void *data,
+			    struct drm_file *file_priv)
+{
+	int ret;
+
+	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
+
+	mutex_lock(&dev->struct_mutex);
+	ret = i915_quiescent(dev);
+	mutex_unlock(&dev->struct_mutex);
+
+	return ret;
+}
+
+static int i915_batchbuffer(struct drm_device *dev, void *data,
+			    struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
+	drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
+	    master_priv->sarea_priv;
+	drm_i915_batchbuffer_t *batch = data;
+	int ret;
+	struct drm_clip_rect *cliprects = NULL;
+
+	if (!dev_priv->allow_batchbuffer) {
+		DRM_ERROR("Batchbuffer ioctl disabled\n");
+		return -EINVAL;
+	}
+
+	DRM_DEBUG_DRIVER("i915 batchbuffer, start %x used %d cliprects %d\n",
+			batch->start, batch->used, batch->num_cliprects);
+
+	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
+
+	if (batch->num_cliprects < 0)
+		return -EINVAL;
+
+	if (batch->num_cliprects) {
+		cliprects = kcalloc(batch->num_cliprects,
+				    sizeof(struct drm_clip_rect),
+				    GFP_KERNEL);
+		if (cliprects == NULL)
+			return -ENOMEM;
+
+		ret = copy_from_user(cliprects, batch->cliprects,
+				     batch->num_cliprects *
+				     sizeof(struct drm_clip_rect));
+		if (ret != 0) {
+			ret = -EFAULT;
+			goto fail_free;
+		}
+	}
+
+	mutex_lock(&dev->struct_mutex);
+	ret = i915_dispatch_batchbuffer(dev, batch, cliprects);
+	mutex_unlock(&dev->struct_mutex);
+
+	if (sarea_priv)
+		sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
+
+fail_free:
+	kfree(cliprects);
+
+	return ret;
+}
+
+static int i915_cmdbuffer(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
+	drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
+	    master_priv->sarea_priv;
+	drm_i915_cmdbuffer_t *cmdbuf = data;
+	struct drm_clip_rect *cliprects = NULL;
+	void *batch_data;
+	int ret;
+
+	DRM_DEBUG_DRIVER("i915 cmdbuffer, buf %p sz %d cliprects %d\n",
+			cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects);
+
+	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
+
+	if (cmdbuf->num_cliprects < 0)
+		return -EINVAL;
+
+	batch_data = kmalloc(cmdbuf->sz, GFP_KERNEL);
+	if (batch_data == NULL)
+		return -ENOMEM;
+
+	ret = copy_from_user(batch_data, cmdbuf->buf, cmdbuf->sz);
+	if (ret != 0) {
+		ret = -EFAULT;
+		goto fail_batch_free;
+	}
+
+	if (cmdbuf->num_cliprects) {
+		cliprects = kcalloc(cmdbuf->num_cliprects,
+				    sizeof(struct drm_clip_rect), GFP_KERNEL);
+		if (cliprects == NULL) {
+			ret = -ENOMEM;
+			goto fail_batch_free;
+		}
+
+		ret = copy_from_user(cliprects, cmdbuf->cliprects,
+				     cmdbuf->num_cliprects *
+				     sizeof(struct drm_clip_rect));
+		if (ret != 0) {
+			ret = -EFAULT;
+			goto fail_clip_free;
+		}
+	}
+
+	mutex_lock(&dev->struct_mutex);
+	ret = i915_dispatch_cmdbuffer(dev, cmdbuf, cliprects, batch_data);
+	mutex_unlock(&dev->struct_mutex);
+	if (ret) {
+		DRM_ERROR("i915_dispatch_cmdbuffer failed\n");
+		goto fail_clip_free;
+	}
+
+	if (sarea_priv)
+		sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
+
+fail_clip_free:
+	kfree(cliprects);
+fail_batch_free:
+	kfree(batch_data);
+
+	return ret;
+}
+
+static int i915_flip_bufs(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv)
+{
+	int ret;
+
+	DRM_DEBUG_DRIVER("%s\n", __func__);
+
+	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
+
+	mutex_lock(&dev->struct_mutex);
+	ret = i915_dispatch_flip(dev);
+	mutex_unlock(&dev->struct_mutex);
+
+	return ret;
+}
+
+static int i915_getparam(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	drm_i915_getparam_t *param = data;
+	int value;
+
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	switch (param->param) {
+	case I915_PARAM_IRQ_ACTIVE:
+		value = dev->pdev->irq ? 1 : 0;
+		break;
+	case I915_PARAM_ALLOW_BATCHBUFFER:
+		value = dev_priv->allow_batchbuffer ? 1 : 0;
+		break;
+	case I915_PARAM_LAST_DISPATCH:
+		value = READ_BREADCRUMB(dev_priv);
+		break;
+	case I915_PARAM_CHIPSET_ID:
+		value = dev->pci_device;
+		break;
+	case I915_PARAM_HAS_GEM:
+		value = dev_priv->has_gem;
+		break;
+	case I915_PARAM_NUM_FENCES_AVAIL:
+		value = dev_priv->num_fence_regs - dev_priv->fence_reg_start;
+		break;
+	case I915_PARAM_HAS_OVERLAY:
+		value = dev_priv->overlay ? 1 : 0;
+		break;
+	case I915_PARAM_HAS_PAGEFLIPPING:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_EXECBUF2:
+		/* depends on GEM */
+		value = dev_priv->has_gem;
+		break;
+	case I915_PARAM_HAS_BSD:
+		value = HAS_BSD(dev);
+		break;
+	case I915_PARAM_HAS_BLT:
+		value = HAS_BLT(dev);
+		break;
+	case I915_PARAM_HAS_RELAXED_FENCING:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_COHERENT_RINGS:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_EXEC_CONSTANTS:
+		value = INTEL_INFO(dev)->gen >= 4;
+		break;
+	case I915_PARAM_HAS_RELAXED_DELTA:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_GEN7_SOL_RESET:
+		value = 1;
+		break;
+	case I915_PARAM_HAS_LLC:
+		value = HAS_LLC(dev);
+		break;
+	default:
+		DRM_DEBUG_DRIVER("Unknown parameter %d\n",
+				 param->param);
+		return -EINVAL;
+	}
+
+	if (DRM_COPY_TO_USER(param->value, &value, sizeof(int))) {
+		DRM_ERROR("DRM_COPY_TO_USER failed\n");
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int i915_setparam(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	drm_i915_setparam_t *param = data;
+
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	switch (param->param) {
+	case I915_SETPARAM_USE_MI_BATCHBUFFER_START:
+		break;
+	case I915_SETPARAM_TEX_LRU_LOG_GRANULARITY:
+		dev_priv->tex_lru_log_granularity = param->value;
+		break;
+	case I915_SETPARAM_ALLOW_BATCHBUFFER:
+		dev_priv->allow_batchbuffer = param->value;
+		break;
+	case I915_SETPARAM_NUM_USED_FENCES:
+		if (param->value > dev_priv->num_fence_regs ||
+		    param->value < 0)
+			return -EINVAL;
+		/* Userspace can use first N regs */
+		dev_priv->fence_reg_start = param->value;
+		break;
+	default:
+		DRM_DEBUG_DRIVER("unknown parameter %d\n",
+					param->param);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int i915_set_status_page(struct drm_device *dev, void *data,
+				struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	drm_i915_hws_addr_t *hws = data;
+	struct intel_ring_buffer *ring = LP_RING(dev_priv);
+
+	if (!I915_NEED_GFX_HWS(dev))
+		return -EINVAL;
+
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		WARN(1, "tried to set status page when mode setting active\n");
+		return 0;
+	}
+
+	DRM_DEBUG_DRIVER("set status page addr 0x%08x\n", (u32)hws->addr);
+
+	ring->status_page.gfx_addr = hws->addr & (0x1ffff<<12);
+
+	dev_priv->hws_map.offset = dev->agp->base + hws->addr;
+	dev_priv->hws_map.size = 4*1024;
+	dev_priv->hws_map.type = 0;
+	dev_priv->hws_map.flags = 0;
+	dev_priv->hws_map.mtrr = 0;
+
+	drm_core_ioremap_wc(&dev_priv->hws_map, dev);
+	if (dev_priv->hws_map.handle == NULL) {
+		i915_dma_cleanup(dev);
+		ring->status_page.gfx_addr = 0;
+		DRM_ERROR("can not ioremap virtual address for"
+				" G33 hw status page\n");
+		return -ENOMEM;
+	}
+	ring->status_page.page_addr =
+		(void __force __iomem *)dev_priv->hws_map.handle;
+	memset_io(ring->status_page.page_addr, 0, PAGE_SIZE);
+	I915_WRITE(HWS_PGA, ring->status_page.gfx_addr);
+
+	DRM_DEBUG_DRIVER("load hws HWS_PGA with gfx mem 0x%x\n",
+			 ring->status_page.gfx_addr);
+	DRM_DEBUG_DRIVER("load hws at %p\n",
+			 ring->status_page.page_addr);
+	return 0;
+}
+
+static int i915_get_bridge_dev(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+	if (!dev_priv->bridge_dev) {
+		DRM_ERROR("bridge device not found\n");
+		return -1;
+	}
+	return 0;
+}
+
+#define MCHBAR_I915 0x44
+#define MCHBAR_I965 0x48
+#define MCHBAR_SIZE (4*4096)
+
+#define DEVEN_REG 0x54
+#define   DEVEN_MCHBAR_EN (1 << 28)
+
+/* Allocate space for the MCH regs if needed, return nonzero on error */
+static int
+intel_alloc_mchbar_resource(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp_lo, temp_hi = 0;
+	u64 mchbar_addr;
+	int ret;
+
+	if (INTEL_INFO(dev)->gen >= 4)
+		pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
+	pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
+	mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
+
+	/* If ACPI doesn't have it, assume we need to allocate it ourselves */
+#ifdef CONFIG_PNP
+	if (mchbar_addr &&
+	    pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE))
+		return 0;
+#endif
+
+	/* Get some space for it */
+	dev_priv->mch_res.name = "i915 MCHBAR";
+	dev_priv->mch_res.flags = IORESOURCE_MEM;
+	ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus,
+				     &dev_priv->mch_res,
+				     MCHBAR_SIZE, MCHBAR_SIZE,
+				     PCIBIOS_MIN_MEM,
+				     0, pcibios_align_resource,
+				     dev_priv->bridge_dev);
+	if (ret) {
+		DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
+		dev_priv->mch_res.start = 0;
+		return ret;
+	}
+
+	if (INTEL_INFO(dev)->gen >= 4)
+		pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
+				       upper_32_bits(dev_priv->mch_res.start));
+
+	pci_write_config_dword(dev_priv->bridge_dev, reg,
+			       lower_32_bits(dev_priv->mch_res.start));
+	return 0;
+}
+
+/* Setup MCHBAR if possible, return true if we should disable it again */
+static void
+intel_setup_mchbar(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp;
+	bool enabled;
+
+	dev_priv->mchbar_need_disable = false;
+
+	if (IS_I915G(dev) || IS_I915GM(dev)) {
+		pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
+		enabled = !!(temp & DEVEN_MCHBAR_EN);
+	} else {
+		pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
+		enabled = temp & 1;
+	}
+
+	/* If it's already enabled, don't have to do anything */
+	if (enabled)
+		return;
+
+	if (intel_alloc_mchbar_resource(dev))
+		return;
+
+	dev_priv->mchbar_need_disable = true;
+
+	/* Space is allocated or reserved, so enable it. */
+	if (IS_I915G(dev) || IS_I915GM(dev)) {
+		pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG,
+				       temp | DEVEN_MCHBAR_EN);
+	} else {
+		pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
+		pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
+	}
+}
+
+static void
+intel_teardown_mchbar(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
+	u32 temp;
+
+	if (dev_priv->mchbar_need_disable) {
+		if (IS_I915G(dev) || IS_I915GM(dev)) {
+			pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
+			temp &= ~DEVEN_MCHBAR_EN;
+			pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, temp);
+		} else {
+			pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
+			temp &= ~1;
+			pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp);
+		}
+	}
+
+	if (dev_priv->mch_res.start)
+		release_resource(&dev_priv->mch_res);
+}
+
+#define PTE_ADDRESS_MASK		0xfffff000
+#define PTE_ADDRESS_MASK_HIGH		0x000000f0 /* i915+ */
+#define PTE_MAPPING_TYPE_UNCACHED	(0 << 1)
+#define PTE_MAPPING_TYPE_DCACHE		(1 << 1) /* i830 only */
+#define PTE_MAPPING_TYPE_CACHED		(3 << 1)
+#define PTE_MAPPING_TYPE_MASK		(3 << 1)
+#define PTE_VALID			(1 << 0)
+
+/**
+ * i915_stolen_to_phys - take an offset into stolen memory and turn it into
+ *                       a physical one
+ * @dev: drm device
+ * @offset: address to translate
+ *
+ * Some chip functions require allocations from stolen space and need the
+ * physical address of the memory in question.
+ */
+static unsigned long i915_stolen_to_phys(struct drm_device *dev, u32 offset)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct pci_dev *pdev = dev_priv->bridge_dev;
+	u32 base;
+
+#if 0
+	/* On the machines I have tested the Graphics Base of Stolen Memory
+	 * is unreliable, so compute the base by subtracting the stolen memory
+	 * from the Top of Low Usable DRAM which is where the BIOS places
+	 * the graphics stolen memory.
+	 */
+	if (INTEL_INFO(dev)->gen > 3 || IS_G33(dev)) {
+		/* top 32bits are reserved = 0 */
+		pci_read_config_dword(pdev, 0xA4, &base);
+	} else {
+		/* XXX presume 8xx is the same as i915 */
+		pci_bus_read_config_dword(pdev->bus, 2, 0x5C, &base);
+	}
+#else
+	if (INTEL_INFO(dev)->gen > 3 || IS_G33(dev)) {
+		u16 val;
+		pci_read_config_word(pdev, 0xb0, &val);
+		base = val >> 4 << 20;
+	} else {
+		u8 val;
+		pci_read_config_byte(pdev, 0x9c, &val);
+		base = val >> 3 << 27;
+	}
+	base -= dev_priv->mm.gtt->stolen_size;
+#endif
+
+	return base + offset;
+}
+
+static void i915_warn_stolen(struct drm_device *dev)
+{
+	DRM_ERROR("not enough stolen space for compressed buffer, disabling\n");
+	DRM_ERROR("hint: you may be able to increase stolen memory size in the BIOS to avoid this\n");
+}
+
+static void i915_setup_compression(struct drm_device *dev, int size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_mm_node *compressed_fb, *uninitialized_var(compressed_llb);
+	unsigned long cfb_base;
+	unsigned long ll_base = 0;
+
+	/* Just in case the BIOS is doing something questionable. */
+	intel_disable_fbc(dev);
+
+	compressed_fb = drm_mm_search_free(&dev_priv->mm.stolen, size, 4096, 0);
+	if (compressed_fb)
+		compressed_fb = drm_mm_get_block(compressed_fb, size, 4096);
+	if (!compressed_fb)
+		goto err;
+
+	cfb_base = i915_stolen_to_phys(dev, compressed_fb->start);
+	if (!cfb_base)
+		goto err_fb;
+
+	if (!(IS_GM45(dev) || HAS_PCH_SPLIT(dev))) {
+		compressed_llb = drm_mm_search_free(&dev_priv->mm.stolen,
+						    4096, 4096, 0);
+		if (compressed_llb)
+			compressed_llb = drm_mm_get_block(compressed_llb,
+							  4096, 4096);
+		if (!compressed_llb)
+			goto err_fb;
+
+		ll_base = i915_stolen_to_phys(dev, compressed_llb->start);
+		if (!ll_base)
+			goto err_llb;
+	}
+
+	dev_priv->cfb_size = size;
+
+	dev_priv->compressed_fb = compressed_fb;
+	if (HAS_PCH_SPLIT(dev))
+		I915_WRITE(ILK_DPFC_CB_BASE, compressed_fb->start);
+	else if (IS_GM45(dev)) {
+		I915_WRITE(DPFC_CB_BASE, compressed_fb->start);
+	} else {
+		I915_WRITE(FBC_CFB_BASE, cfb_base);
+		I915_WRITE(FBC_LL_BASE, ll_base);
+		dev_priv->compressed_llb = compressed_llb;
+	}
+
+	DRM_DEBUG_KMS("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n",
+		      cfb_base, ll_base, size >> 20);
+	return;
+
+err_llb:
+	drm_mm_put_block(compressed_llb);
+err_fb:
+	drm_mm_put_block(compressed_fb);
+err:
+	dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
+	i915_warn_stolen(dev);
+}
+
+static void i915_cleanup_compression(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	drm_mm_put_block(dev_priv->compressed_fb);
+	if (dev_priv->compressed_llb)
+		drm_mm_put_block(dev_priv->compressed_llb);
+}
+
+/* true = enable decode, false = disable decoder */
+static unsigned int i915_vga_set_decode(void *cookie, bool state)
+{
+	struct drm_device *dev = cookie;
+
+	intel_modeset_vga_set_state(dev, state);
+	if (state)
+		return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
+		       VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
+	else
+		return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
+}
+
+static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
+	if (state == VGA_SWITCHEROO_ON) {
+		printk(KERN_INFO "i915: switched on\n");
+		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
+		/* i915 resume handler doesn't set to D0 */
+		pci_set_power_state(dev->pdev, PCI_D0);
+		i915_resume(dev);
+		dev->switch_power_state = DRM_SWITCH_POWER_ON;
+	} else {
+		printk(KERN_ERR "i915: switched off\n");
+		dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
+		i915_suspend(dev, pmm);
+		dev->switch_power_state = DRM_SWITCH_POWER_OFF;
+	}
+}
+
+static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	bool can_switch;
+
+	spin_lock(&dev->count_lock);
+	can_switch = (dev->open_count == 0);
+	spin_unlock(&dev->count_lock);
+	return can_switch;
+}
+
+static bool
+intel_enable_ppgtt(struct drm_device *dev)
+{
+	if (i915_enable_ppgtt >= 0)
+		return i915_enable_ppgtt;
+
+#ifdef CONFIG_INTEL_IOMMU
+	/* Disable ppgtt on SNB if VT-d is on. */
+	if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
+		return false;
+#endif
+
+	return true;
+}
+
+static int i915_load_gem_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long prealloc_size, gtt_size, mappable_size;
+	int ret;
+
+	prealloc_size = dev_priv->mm.gtt->stolen_size;
+	gtt_size = dev_priv->mm.gtt->gtt_total_entries << PAGE_SHIFT;
+	mappable_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
+
+	/* Basic memrange allocator for stolen space */
+	drm_mm_init(&dev_priv->mm.stolen, 0, prealloc_size);
+
+	mutex_lock(&dev->struct_mutex);
+	if (intel_enable_ppgtt(dev) && HAS_ALIASING_PPGTT(dev)) {
+		/* PPGTT pdes are stolen from global gtt ptes, so shrink the
+		 * aperture accordingly when using aliasing ppgtt. */
+		gtt_size -= I915_PPGTT_PD_ENTRIES*PAGE_SIZE;
+		/* For paranoia keep the guard page in between. */
+		gtt_size -= PAGE_SIZE;
+
+		i915_gem_do_init(dev, 0, mappable_size, gtt_size);
+
+		ret = i915_gem_init_aliasing_ppgtt(dev);
+		if (ret) {
+			mutex_unlock(&dev->struct_mutex);
+			return ret;
+		}
+	} else {
+		/* Let GEM Manage all of the aperture.
+		 *
+		 * However, leave one page at the end still bound to the scratch
+		 * page.  There are a number of places where the hardware
+		 * apparently prefetches past the end of the object, and we've
+		 * seen multiple hangs with the GPU head pointer stuck in a
+		 * batchbuffer bound at the last page of the aperture.  One page
+		 * should be enough to keep any prefetching inside of the
+		 * aperture.
+		 */
+		i915_gem_do_init(dev, 0, mappable_size, gtt_size - PAGE_SIZE);
+	}
+
+	ret = i915_gem_init_hw(dev);
+	mutex_unlock(&dev->struct_mutex);
+	if (ret) {
+		i915_gem_cleanup_aliasing_ppgtt(dev);
+		return ret;
+	}
+
+	/* Try to set up FBC with a reasonable compressed buffer size */
+	if (I915_HAS_FBC(dev) && i915_powersave) {
+		int cfb_size;
+
+		/* Leave 1M for line length buffer & misc. */
+
+		/* Try to get a 32M buffer... */
+		if (prealloc_size > (36*1024*1024))
+			cfb_size = 32*1024*1024;
+		else /* fall back to 7/8 of the stolen space */
+			cfb_size = prealloc_size * 7 / 8;
+		i915_setup_compression(dev, cfb_size);
+	}
+
+	/* Allow hardware batchbuffers unless told otherwise. */
+	dev_priv->allow_batchbuffer = 1;
+	return 0;
+}
+
+static int i915_load_modeset_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = intel_parse_bios(dev);
+	if (ret)
+		DRM_INFO("failed to find VBIOS tables\n");
+
+	/* If we have > 1 VGA cards, then we need to arbitrate access
+	 * to the common VGA resources.
+	 *
+	 * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
+	 * then we do not take part in VGA arbitration and the
+	 * vga_client_register() fails with -ENODEV.
+	 */
+	ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
+	if (ret && ret != -ENODEV)
+		goto out;
+
+	intel_register_dsm_handler();
+
+	ret = vga_switcheroo_register_client(dev->pdev,
+					     i915_switcheroo_set_state,
+					     NULL,
+					     i915_switcheroo_can_switch);
+	if (ret)
+		goto cleanup_vga_client;
+
+	/* IIR "flip pending" bit means done if this bit is set */
+	if (IS_GEN3(dev) && (I915_READ(ECOSKPD) & ECO_FLIP_DONE))
+		dev_priv->flip_pending_is_done = true;
+
+	intel_modeset_init(dev);
+
+	ret = i915_load_gem_init(dev);
+	if (ret)
+		goto cleanup_vga_switcheroo;
+
+	intel_modeset_gem_init(dev);
+
+	ret = drm_irq_install(dev);
+	if (ret)
+		goto cleanup_gem;
+
+	/* Always safe in the mode setting case. */
+	/* FIXME: do pre/post-mode set stuff in core KMS code */
+	dev->vblank_disable_allowed = 1;
+
+	ret = intel_fbdev_init(dev);
+	if (ret)
+		goto cleanup_irq;
+
+	drm_kms_helper_poll_init(dev);
+
+	/* We're off and running w/KMS */
+	dev_priv->mm.suspended = 0;
+
+	return 0;
+
+cleanup_irq:
+	drm_irq_uninstall(dev);
+cleanup_gem:
+	mutex_lock(&dev->struct_mutex);
+	i915_gem_cleanup_ringbuffer(dev);
+	mutex_unlock(&dev->struct_mutex);
+	i915_gem_cleanup_aliasing_ppgtt(dev);
+cleanup_vga_switcheroo:
+	vga_switcheroo_unregister_client(dev->pdev);
+cleanup_vga_client:
+	vga_client_register(dev->pdev, NULL, NULL, NULL);
+out:
+	return ret;
+}
+
+int i915_master_create(struct drm_device *dev, struct drm_master *master)
+{
+	struct drm_i915_master_private *master_priv;
+
+	master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL);
+	if (!master_priv)
+		return -ENOMEM;
+
+	master->driver_priv = master_priv;
+	return 0;
+}
+
+void i915_master_destroy(struct drm_device *dev, struct drm_master *master)
+{
+	struct drm_i915_master_private *master_priv = master->driver_priv;
+
+	if (!master_priv)
+		return;
+
+	kfree(master_priv);
+
+	master->driver_priv = NULL;
+}
+
+static void i915_pineview_get_mem_freq(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 tmp;
+
+	tmp = I915_READ(CLKCFG);
+
+	switch (tmp & CLKCFG_FSB_MASK) {
+	case CLKCFG_FSB_533:
+		dev_priv->fsb_freq = 533; /* 133*4 */
+		break;
+	case CLKCFG_FSB_800:
+		dev_priv->fsb_freq = 800; /* 200*4 */
+		break;
+	case CLKCFG_FSB_667:
+		dev_priv->fsb_freq =  667; /* 167*4 */
+		break;
+	case CLKCFG_FSB_400:
+		dev_priv->fsb_freq = 400; /* 100*4 */
+		break;
+	}
+
+	switch (tmp & CLKCFG_MEM_MASK) {
+	case CLKCFG_MEM_533:
+		dev_priv->mem_freq = 533;
+		break;
+	case CLKCFG_MEM_667:
+		dev_priv->mem_freq = 667;
+		break;
+	case CLKCFG_MEM_800:
+		dev_priv->mem_freq = 800;
+		break;
+	}
+
+	/* detect pineview DDR3 setting */
+	tmp = I915_READ(CSHRDDR3CTL);
+	dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0;
+}
+
+static void i915_ironlake_get_mem_freq(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u16 ddrpll, csipll;
+
+	ddrpll = I915_READ16(DDRMPLL1);
+	csipll = I915_READ16(CSIPLL0);
+
+	switch (ddrpll & 0xff) {
+	case 0xc:
+		dev_priv->mem_freq = 800;
+		break;
+	case 0x10:
+		dev_priv->mem_freq = 1066;
+		break;
+	case 0x14:
+		dev_priv->mem_freq = 1333;
+		break;
+	case 0x18:
+		dev_priv->mem_freq = 1600;
+		break;
+	default:
+		DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n",
+				 ddrpll & 0xff);
+		dev_priv->mem_freq = 0;
+		break;
+	}
+
+	dev_priv->r_t = dev_priv->mem_freq;
+
+	switch (csipll & 0x3ff) {
+	case 0x00c:
+		dev_priv->fsb_freq = 3200;
+		break;
+	case 0x00e:
+		dev_priv->fsb_freq = 3733;
+		break;
+	case 0x010:
+		dev_priv->fsb_freq = 4266;
+		break;
+	case 0x012:
+		dev_priv->fsb_freq = 4800;
+		break;
+	case 0x014:
+		dev_priv->fsb_freq = 5333;
+		break;
+	case 0x016:
+		dev_priv->fsb_freq = 5866;
+		break;
+	case 0x018:
+		dev_priv->fsb_freq = 6400;
+		break;
+	default:
+		DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n",
+				 csipll & 0x3ff);
+		dev_priv->fsb_freq = 0;
+		break;
+	}
+
+	if (dev_priv->fsb_freq == 3200) {
+		dev_priv->c_m = 0;
+	} else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) {
+		dev_priv->c_m = 1;
+	} else {
+		dev_priv->c_m = 2;
+	}
+}
+
+static const struct cparams {
+	u16 i;
+	u16 t;
+	u16 m;
+	u16 c;
+} cparams[] = {
+	{ 1, 1333, 301, 28664 },
+	{ 1, 1066, 294, 24460 },
+	{ 1, 800, 294, 25192 },
+	{ 0, 1333, 276, 27605 },
+	{ 0, 1066, 276, 27605 },
+	{ 0, 800, 231, 23784 },
+};
+
+unsigned long i915_chipset_val(struct drm_i915_private *dev_priv)
+{
+	u64 total_count, diff, ret;
+	u32 count1, count2, count3, m = 0, c = 0;
+	unsigned long now = jiffies_to_msecs(jiffies), diff1;
+	int i;
+
+	diff1 = now - dev_priv->last_time1;
+
+	/* Prevent division-by-zero if we are asking too fast.
+	 * Also, we don't get interesting results if we are polling
+	 * faster than once in 10ms, so just return the saved value
+	 * in such cases.
+	 */
+	if (diff1 <= 10)
+		return dev_priv->chipset_power;
+
+	count1 = I915_READ(DMIEC);
+	count2 = I915_READ(DDREC);
+	count3 = I915_READ(CSIEC);
+
+	total_count = count1 + count2 + count3;
+
+	/* FIXME: handle per-counter overflow */
+	if (total_count < dev_priv->last_count1) {
+		diff = ~0UL - dev_priv->last_count1;
+		diff += total_count;
+	} else {
+		diff = total_count - dev_priv->last_count1;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(cparams); i++) {
+		if (cparams[i].i == dev_priv->c_m &&
+		    cparams[i].t == dev_priv->r_t) {
+			m = cparams[i].m;
+			c = cparams[i].c;
+			break;
+		}
+	}
+
+	diff = div_u64(diff, diff1);
+	ret = ((m * diff) + c);
+	ret = div_u64(ret, 10);
+
+	dev_priv->last_count1 = total_count;
+	dev_priv->last_time1 = now;
+
+	dev_priv->chipset_power = ret;
+
+	return ret;
+}
+
+unsigned long i915_mch_val(struct drm_i915_private *dev_priv)
+{
+	unsigned long m, x, b;
+	u32 tsfs;
+
+	tsfs = I915_READ(TSFS);
+
+	m = ((tsfs & TSFS_SLOPE_MASK) >> TSFS_SLOPE_SHIFT);
+	x = I915_READ8(TR1);
+
+	b = tsfs & TSFS_INTR_MASK;
+
+	return ((m * x) / 127) - b;
+}
+
+static u16 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
+{
+	static const struct v_table {
+		u16 vd; /* in .1 mil */
+		u16 vm; /* in .1 mil */
+	} v_table[] = {
+		{ 0, 0, },
+		{ 375, 0, },
+		{ 500, 0, },
+		{ 625, 0, },
+		{ 750, 0, },
+		{ 875, 0, },
+		{ 1000, 0, },
+		{ 1125, 0, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4125, 3000, },
+		{ 4250, 3125, },
+		{ 4375, 3250, },
+		{ 4500, 3375, },
+		{ 4625, 3500, },
+		{ 4750, 3625, },
+		{ 4875, 3750, },
+		{ 5000, 3875, },
+		{ 5125, 4000, },
+		{ 5250, 4125, },
+		{ 5375, 4250, },
+		{ 5500, 4375, },
+		{ 5625, 4500, },
+		{ 5750, 4625, },
+		{ 5875, 4750, },
+		{ 6000, 4875, },
+		{ 6125, 5000, },
+		{ 6250, 5125, },
+		{ 6375, 5250, },
+		{ 6500, 5375, },
+		{ 6625, 5500, },
+		{ 6750, 5625, },
+		{ 6875, 5750, },
+		{ 7000, 5875, },
+		{ 7125, 6000, },
+		{ 7250, 6125, },
+		{ 7375, 6250, },
+		{ 7500, 6375, },
+		{ 7625, 6500, },
+		{ 7750, 6625, },
+		{ 7875, 6750, },
+		{ 8000, 6875, },
+		{ 8125, 7000, },
+		{ 8250, 7125, },
+		{ 8375, 7250, },
+		{ 8500, 7375, },
+		{ 8625, 7500, },
+		{ 8750, 7625, },
+		{ 8875, 7750, },
+		{ 9000, 7875, },
+		{ 9125, 8000, },
+		{ 9250, 8125, },
+		{ 9375, 8250, },
+		{ 9500, 8375, },
+		{ 9625, 8500, },
+		{ 9750, 8625, },
+		{ 9875, 8750, },
+		{ 10000, 8875, },
+		{ 10125, 9000, },
+		{ 10250, 9125, },
+		{ 10375, 9250, },
+		{ 10500, 9375, },
+		{ 10625, 9500, },
+		{ 10750, 9625, },
+		{ 10875, 9750, },
+		{ 11000, 9875, },
+		{ 11125, 10000, },
+		{ 11250, 10125, },
+		{ 11375, 10250, },
+		{ 11500, 10375, },
+		{ 11625, 10500, },
+		{ 11750, 10625, },
+		{ 11875, 10750, },
+		{ 12000, 10875, },
+		{ 12125, 11000, },
+		{ 12250, 11125, },
+		{ 12375, 11250, },
+		{ 12500, 11375, },
+		{ 12625, 11500, },
+		{ 12750, 11625, },
+		{ 12875, 11750, },
+		{ 13000, 11875, },
+		{ 13125, 12000, },
+		{ 13250, 12125, },
+		{ 13375, 12250, },
+		{ 13500, 12375, },
+		{ 13625, 12500, },
+		{ 13750, 12625, },
+		{ 13875, 12750, },
+		{ 14000, 12875, },
+		{ 14125, 13000, },
+		{ 14250, 13125, },
+		{ 14375, 13250, },
+		{ 14500, 13375, },
+		{ 14625, 13500, },
+		{ 14750, 13625, },
+		{ 14875, 13750, },
+		{ 15000, 13875, },
+		{ 15125, 14000, },
+		{ 15250, 14125, },
+		{ 15375, 14250, },
+		{ 15500, 14375, },
+		{ 15625, 14500, },
+		{ 15750, 14625, },
+		{ 15875, 14750, },
+		{ 16000, 14875, },
+		{ 16125, 15000, },
+	};
+	if (dev_priv->info->is_mobile)
+		return v_table[pxvid].vm;
+	else
+		return v_table[pxvid].vd;
+}
+
+void i915_update_gfx_val(struct drm_i915_private *dev_priv)
+{
+	struct timespec now, diff1;
+	u64 diff;
+	unsigned long diffms;
+	u32 count;
+
+	if (dev_priv->info->gen != 5)
+		return;
+
+	getrawmonotonic(&now);
+	diff1 = timespec_sub(now, dev_priv->last_time2);
+
+	/* Don't divide by 0 */
+	diffms = diff1.tv_sec * 1000 + diff1.tv_nsec / 1000000;
+	if (!diffms)
+		return;
+
+	count = I915_READ(GFXEC);
+
+	if (count < dev_priv->last_count2) {
+		diff = ~0UL - dev_priv->last_count2;
+		diff += count;
+	} else {
+		diff = count - dev_priv->last_count2;
+	}
+
+	dev_priv->last_count2 = count;
+	dev_priv->last_time2 = now;
+
+	/* More magic constants... */
+	diff = diff * 1181;
+	diff = div_u64(diff, diffms * 10);
+	dev_priv->gfx_power = diff;
+}
+
+unsigned long i915_gfx_val(struct drm_i915_private *dev_priv)
+{
+	unsigned long t, corr, state1, corr2, state2;
+	u32 pxvid, ext_v;
+
+	pxvid = I915_READ(PXVFREQ_BASE + (dev_priv->cur_delay * 4));
+	pxvid = (pxvid >> 24) & 0x7f;
+	ext_v = pvid_to_extvid(dev_priv, pxvid);
+
+	state1 = ext_v;
+
+	t = i915_mch_val(dev_priv);
+
+	/* Revel in the empirically derived constants */
+
+	/* Correction factor in 1/100000 units */
+	if (t > 80)
+		corr = ((t * 2349) + 135940);
+	else if (t >= 50)
+		corr = ((t * 964) + 29317);
+	else /* < 50 */
+		corr = ((t * 301) + 1004);
+
+	corr = corr * ((150142 * state1) / 10000 - 78642);
+	corr /= 100000;
+	corr2 = (corr * dev_priv->corr);
+
+	state2 = (corr2 * state1) / 10000;
+	state2 /= 100; /* convert to mW */
+
+	i915_update_gfx_val(dev_priv);
+
+	return dev_priv->gfx_power + state2;
+}
+
+/* Global for IPS driver to get at the current i915 device */
+static struct drm_i915_private *i915_mch_dev;
+/*
+ * Lock protecting IPS related data structures
+ *   - i915_mch_dev
+ *   - dev_priv->max_delay
+ *   - dev_priv->min_delay
+ *   - dev_priv->fmax
+ *   - dev_priv->gpu_busy
+ */
+static DEFINE_SPINLOCK(mchdev_lock);
+
+/**
+ * i915_read_mch_val - return value for IPS use
+ *
+ * Calculate and return a value for the IPS driver to use when deciding whether
+ * we have thermal and power headroom to increase CPU or GPU power budget.
+ */
+unsigned long i915_read_mch_val(void)
+{
+	struct drm_i915_private *dev_priv;
+	unsigned long chipset_val, graphics_val, ret = 0;
+
+	spin_lock(&mchdev_lock);
+	if (!i915_mch_dev)
+		goto out_unlock;
+	dev_priv = i915_mch_dev;
+
+	chipset_val = i915_chipset_val(dev_priv);
+	graphics_val = i915_gfx_val(dev_priv);
+
+	ret = chipset_val + graphics_val;
+
+out_unlock:
+	spin_unlock(&mchdev_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i915_read_mch_val);
+
+/**
+ * i915_gpu_raise - raise GPU frequency limit
+ *
+ * Raise the limit; IPS indicates we have thermal headroom.
+ */
+bool i915_gpu_raise(void)
+{
+	struct drm_i915_private *dev_priv;
+	bool ret = true;
+
+	spin_lock(&mchdev_lock);
+	if (!i915_mch_dev) {
+		ret = false;
+		goto out_unlock;
+	}
+	dev_priv = i915_mch_dev;
+
+	if (dev_priv->max_delay > dev_priv->fmax)
+		dev_priv->max_delay--;
+
+out_unlock:
+	spin_unlock(&mchdev_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i915_gpu_raise);
+
+/**
+ * i915_gpu_lower - lower GPU frequency limit
+ *
+ * IPS indicates we're close to a thermal limit, so throttle back the GPU
+ * frequency maximum.
+ */
+bool i915_gpu_lower(void)
+{
+	struct drm_i915_private *dev_priv;
+	bool ret = true;
+
+	spin_lock(&mchdev_lock);
+	if (!i915_mch_dev) {
+		ret = false;
+		goto out_unlock;
+	}
+	dev_priv = i915_mch_dev;
+
+	if (dev_priv->max_delay < dev_priv->min_delay)
+		dev_priv->max_delay++;
+
+out_unlock:
+	spin_unlock(&mchdev_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i915_gpu_lower);
+
+/**
+ * i915_gpu_busy - indicate GPU business to IPS
+ *
+ * Tell the IPS driver whether or not the GPU is busy.
+ */
+bool i915_gpu_busy(void)
+{
+	struct drm_i915_private *dev_priv;
+	bool ret = false;
+
+	spin_lock(&mchdev_lock);
+	if (!i915_mch_dev)
+		goto out_unlock;
+	dev_priv = i915_mch_dev;
+
+	ret = dev_priv->busy;
+
+out_unlock:
+	spin_unlock(&mchdev_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i915_gpu_busy);
+
+/**
+ * i915_gpu_turbo_disable - disable graphics turbo
+ *
+ * Disable graphics turbo by resetting the max frequency and setting the
+ * current frequency to the default.
+ */
+bool i915_gpu_turbo_disable(void)
+{
+	struct drm_i915_private *dev_priv;
+	bool ret = true;
+
+	spin_lock(&mchdev_lock);
+	if (!i915_mch_dev) {
+		ret = false;
+		goto out_unlock;
+	}
+	dev_priv = i915_mch_dev;
+
+	dev_priv->max_delay = dev_priv->fstart;
+
+	if (!ironlake_set_drps(dev_priv->dev, dev_priv->fstart))
+		ret = false;
+
+out_unlock:
+	spin_unlock(&mchdev_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
+
+/**
+ * Tells the intel_ips driver that the i915 driver is now loaded, if
+ * IPS got loaded first.
+ *
+ * This awkward dance is so that neither module has to depend on the
+ * other in order for IPS to do the appropriate communication of
+ * GPU turbo limits to i915.
+ */
+static void
+ips_ping_for_i915_load(void)
+{
+	void (*link)(void);
+
+	link = symbol_get(ips_link_to_i915_driver);
+	if (link) {
+		link();
+		symbol_put(ips_link_to_i915_driver);
+	}
+}
+
+/**
+ * i915_driver_load - setup chip and create an initial config
+ * @dev: DRM device
+ * @flags: startup flags
+ *
+ * The driver load routine has to do several things:
+ *   - drive output discovery via intel_modeset_init()
+ *   - initialize the memory manager
+ *   - allocate initial config memory
+ *   - setup the DRM framebuffer with the allocated memory
+ */
+int i915_driver_load(struct drm_device *dev, unsigned long flags)
+{
+	struct drm_i915_private *dev_priv;
+	int ret = 0, mmio_bar;
+	uint32_t agp_size;
+
+	/* i915 has 4 more counters */
+	dev->counters += 4;
+	dev->types[6] = _DRM_STAT_IRQ;
+	dev->types[7] = _DRM_STAT_PRIMARY;
+	dev->types[8] = _DRM_STAT_SECONDARY;
+	dev->types[9] = _DRM_STAT_DMA;
+
+	dev_priv = kzalloc(sizeof(drm_i915_private_t), GFP_KERNEL);
+	if (dev_priv == NULL)
+		return -ENOMEM;
+
+	dev->dev_private = (void *)dev_priv;
+	dev_priv->dev = dev;
+	dev_priv->info = (struct intel_device_info *) flags;
+
+	if (i915_get_bridge_dev(dev)) {
+		ret = -EIO;
+		goto free_priv;
+	}
+
+	pci_set_master(dev->pdev);
+
+	/* overlay on gen2 is broken and can't address above 1G */
+	if (IS_GEN2(dev))
+		dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
+
+	/* 965GM sometimes incorrectly writes to hardware status page (HWS)
+	 * using 32bit addressing, overwriting memory if HWS is located
+	 * above 4GB.
+	 *
+	 * The documentation also mentions an issue with undefined
+	 * behaviour if any general state is accessed within a page above 4GB,
+	 * which also needs to be handled carefully.
+	 */
+	if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
+		dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
+
+	mmio_bar = IS_GEN2(dev) ? 1 : 0;
+	dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, 0);
+	if (!dev_priv->regs) {
+		DRM_ERROR("failed to map registers\n");
+		ret = -EIO;
+		goto put_bridge;
+	}
+
+	dev_priv->mm.gtt = intel_gtt_get();
+	if (!dev_priv->mm.gtt) {
+		DRM_ERROR("Failed to initialize GTT\n");
+		ret = -ENODEV;
+		goto out_rmmap;
+	}
+
+	agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
+
+	dev_priv->mm.gtt_mapping =
+		io_mapping_create_wc(dev->agp->base, agp_size);
+	if (dev_priv->mm.gtt_mapping == NULL) {
+		ret = -EIO;
+		goto out_rmmap;
+	}
+
+	/* Set up a WC MTRR for non-PAT systems.  This is more common than
+	 * one would think, because the kernel disables PAT on first
+	 * generation Core chips because WC PAT gets overridden by a UC
+	 * MTRR if present.  Even if a UC MTRR isn't present.
+	 */
+	dev_priv->mm.gtt_mtrr = mtrr_add(dev->agp->base,
+					 agp_size,
+					 MTRR_TYPE_WRCOMB, 1);
+	if (dev_priv->mm.gtt_mtrr < 0) {
+		DRM_INFO("MTRR allocation failed.  Graphics "
+			 "performance may suffer.\n");
+	}
+
+	/* The i915 workqueue is primarily used for batched retirement of
+	 * requests (and thus managing bo) once the task has been completed
+	 * by the GPU. i915_gem_retire_requests() is called directly when we
+	 * need high-priority retirement, such as waiting for an explicit
+	 * bo.
+	 *
+	 * It is also used for periodic low-priority events, such as
+	 * idle-timers and recording error state.
+	 *
+	 * All tasks on the workqueue are expected to acquire the dev mutex
+	 * so there is no point in running more than one instance of the
+	 * workqueue at any time: max_active = 1 and NON_REENTRANT.
+	 */
+	dev_priv->wq = alloc_workqueue("i915",
+				       WQ_UNBOUND | WQ_NON_REENTRANT,
+				       1);
+	if (dev_priv->wq == NULL) {
+		DRM_ERROR("Failed to create our workqueue.\n");
+		ret = -ENOMEM;
+		goto out_mtrrfree;
+	}
+
+	/* enable GEM by default */
+	dev_priv->has_gem = 1;
+
+	intel_irq_init(dev);
+
+	/* Try to make sure MCHBAR is enabled before poking at it */
+	intel_setup_mchbar(dev);
+	intel_setup_gmbus(dev);
+	intel_opregion_setup(dev);
+
+	/* Make sure the bios did its job and set up vital registers */
+	intel_setup_bios(dev);
+
+	i915_gem_load(dev);
+
+	/* Init HWS */
+	if (!I915_NEED_GFX_HWS(dev)) {
+		ret = i915_init_phys_hws(dev);
+		if (ret)
+			goto out_gem_unload;
+	}
+
+	if (IS_PINEVIEW(dev))
+		i915_pineview_get_mem_freq(dev);
+	else if (IS_GEN5(dev))
+		i915_ironlake_get_mem_freq(dev);
+
+	/* On the 945G/GM, the chipset reports the MSI capability on the
+	 * integrated graphics even though the support isn't actually there
+	 * according to the published specs.  It doesn't appear to function
+	 * correctly in testing on 945G.
+	 * This may be a side effect of MSI having been made available for PEG
+	 * and the registers being closely associated.
+	 *
+	 * According to chipset errata, on the 965GM, MSI interrupts may
+	 * be lost or delayed, but we use them anyways to avoid
+	 * stuck interrupts on some machines.
+	 */
+	if (!IS_I945G(dev) && !IS_I945GM(dev))
+		pci_enable_msi(dev->pdev);
+
+	spin_lock_init(&dev_priv->gt_lock);
+	spin_lock_init(&dev_priv->irq_lock);
+	spin_lock_init(&dev_priv->error_lock);
+	spin_lock_init(&dev_priv->rps_lock);
+
+	if (IS_IVYBRIDGE(dev))
+		dev_priv->num_pipe = 3;
+	else if (IS_MOBILE(dev) || !IS_GEN2(dev))
+		dev_priv->num_pipe = 2;
+	else
+		dev_priv->num_pipe = 1;
+
+	ret = drm_vblank_init(dev, dev_priv->num_pipe);
+	if (ret)
+		goto out_gem_unload;
+
+	/* Start out suspended */
+	dev_priv->mm.suspended = 1;
+
+	intel_detect_pch(dev);
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		ret = i915_load_modeset_init(dev);
+		if (ret < 0) {
+			DRM_ERROR("failed to init modeset\n");
+			goto out_gem_unload;
+		}
+	}
+
+	/* Must be done after probing outputs */
+	intel_opregion_init(dev);
+	acpi_video_register();
+
+	setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
+		    (unsigned long) dev);
+
+	if (IS_GEN5(dev)) {
+		spin_lock(&mchdev_lock);
+		i915_mch_dev = dev_priv;
+		dev_priv->mchdev_lock = &mchdev_lock;
+		spin_unlock(&mchdev_lock);
+
+		ips_ping_for_i915_load();
+	}
+
+	return 0;
+
+out_gem_unload:
+	if (dev_priv->mm.inactive_shrinker.shrink)
+		unregister_shrinker(&dev_priv->mm.inactive_shrinker);
+
+	if (dev->pdev->msi_enabled)
+		pci_disable_msi(dev->pdev);
+
+	intel_teardown_gmbus(dev);
+	intel_teardown_mchbar(dev);
+	destroy_workqueue(dev_priv->wq);
+out_mtrrfree:
+	if (dev_priv->mm.gtt_mtrr >= 0) {
+		mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
+			 dev->agp->agp_info.aper_size * 1024 * 1024);
+		dev_priv->mm.gtt_mtrr = -1;
+	}
+	io_mapping_free(dev_priv->mm.gtt_mapping);
+out_rmmap:
+	pci_iounmap(dev->pdev, dev_priv->regs);
+put_bridge:
+	pci_dev_put(dev_priv->bridge_dev);
+free_priv:
+	kfree(dev_priv);
+	return ret;
+}
+
+int i915_driver_unload(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	spin_lock(&mchdev_lock);
+	i915_mch_dev = NULL;
+	spin_unlock(&mchdev_lock);
+
+	if (dev_priv->mm.inactive_shrinker.shrink)
+		unregister_shrinker(&dev_priv->mm.inactive_shrinker);
+
+	mutex_lock(&dev->struct_mutex);
+	ret = i915_gpu_idle(dev, true);
+	if (ret)
+		DRM_ERROR("failed to idle hardware: %d\n", ret);
+	mutex_unlock(&dev->struct_mutex);
+
+	/* Cancel the retire work handler, which should be idle now. */
+	cancel_delayed_work_sync(&dev_priv->mm.retire_work);
+
+	io_mapping_free(dev_priv->mm.gtt_mapping);
+	if (dev_priv->mm.gtt_mtrr >= 0) {
+		mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
+			 dev->agp->agp_info.aper_size * 1024 * 1024);
+		dev_priv->mm.gtt_mtrr = -1;
+	}
+
+	acpi_video_unregister();
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		intel_fbdev_fini(dev);
+		intel_modeset_cleanup(dev);
+
+		/*
+		 * free the memory space allocated for the child device
+		 * config parsed from VBT
+		 */
+		if (dev_priv->child_dev && dev_priv->child_dev_num) {
+			kfree(dev_priv->child_dev);
+			dev_priv->child_dev = NULL;
+			dev_priv->child_dev_num = 0;
+		}
+
+		vga_switcheroo_unregister_client(dev->pdev);
+		vga_client_register(dev->pdev, NULL, NULL, NULL);
+	}
+
+	/* Free error state after interrupts are fully disabled. */
+	del_timer_sync(&dev_priv->hangcheck_timer);
+	cancel_work_sync(&dev_priv->error_work);
+	i915_destroy_error_state(dev);
+
+	if (dev->pdev->msi_enabled)
+		pci_disable_msi(dev->pdev);
+
+	intel_opregion_fini(dev);
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		/* Flush any outstanding unpin_work. */
+		flush_workqueue(dev_priv->wq);
+
+		mutex_lock(&dev->struct_mutex);
+		i915_gem_free_all_phys_object(dev);
+		i915_gem_cleanup_ringbuffer(dev);
+		mutex_unlock(&dev->struct_mutex);
+		i915_gem_cleanup_aliasing_ppgtt(dev);
+		if (I915_HAS_FBC(dev) && i915_powersave)
+			i915_cleanup_compression(dev);
+		drm_mm_takedown(&dev_priv->mm.stolen);
+
+		intel_cleanup_overlay(dev);
+
+		if (!I915_NEED_GFX_HWS(dev))
+			i915_free_hws(dev);
+	}
+
+	if (dev_priv->regs != NULL)
+		pci_iounmap(dev->pdev, dev_priv->regs);
+
+	intel_teardown_gmbus(dev);
+	intel_teardown_mchbar(dev);
+
+	destroy_workqueue(dev_priv->wq);
+
+	pci_dev_put(dev_priv->bridge_dev);
+	kfree(dev->dev_private);
+
+	return 0;
+}
+
+int i915_driver_open(struct drm_device *dev, struct drm_file *file)
+{
+	struct drm_i915_file_private *file_priv;
+
+	DRM_DEBUG_DRIVER("\n");
+	file_priv = kmalloc(sizeof(*file_priv), GFP_KERNEL);
+	if (!file_priv)
+		return -ENOMEM;
+
+	file->driver_priv = file_priv;
+
+	spin_lock_init(&file_priv->mm.lock);
+	INIT_LIST_HEAD(&file_priv->mm.request_list);
+
+	return 0;
+}
+
+/**
+ * i915_driver_lastclose - clean up after all DRM clients have exited
+ * @dev: DRM device
+ *
+ * Take care of cleaning up after all DRM clients have exited.  In the
+ * mode setting case, we want to restore the kernel's initial mode (just
+ * in case the last client left us in a bad state).
+ *
+ * Additionally, in the non-mode setting case, we'll tear down the AGP
+ * and DMA structures, since the kernel won't be using them, and clea
+ * up any GEM state.
+ */
+void i915_driver_lastclose(struct drm_device * dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (!dev_priv || drm_core_check_feature(dev, DRIVER_MODESET)) {
+		intel_fb_restore_mode(dev);
+		vga_switcheroo_process_delayed_switch();
+		return;
+	}
+
+	i915_gem_lastclose(dev);
+
+	i915_dma_cleanup(dev);
+}
+
+void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
+{
+	i915_gem_release(dev, file_priv);
+}
+
+void i915_driver_postclose(struct drm_device *dev, struct drm_file *file)
+{
+	struct drm_i915_file_private *file_priv = file->driver_priv;
+
+	kfree(file_priv);
+}
+
+struct drm_ioctl_desc i915_ioctls[] = {
+	DRM_IOCTL_DEF_DRV(I915_INIT, i915_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_FLUSH, i915_flush_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_FLIP, i915_flip_bufs, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, i915_batchbuffer, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, i915_irq_emit, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, i915_irq_wait, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_SETPARAM, i915_setparam, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, i915_cmdbuffer, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP,  drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE,  i915_vblank_pipe_set, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE,  i915_vblank_pipe_get, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, i915_vblank_swap, DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, i915_gem_entervt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, i915_gem_leavevt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
+	DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, intel_sprite_get_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
+};
+
+int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
+
+/**
+ * Determine if the device really is AGP or not.
+ *
+ * All Intel graphics chipsets are treated as AGP, even if they are really
+ * PCI-e.
+ *
+ * \param dev   The device to be tested.
+ *
+ * \returns
+ * A value of 1 is always retured to indictate every i9x5 is AGP.
+ */
+int i915_driver_device_is_agp(struct drm_device * dev)
+{
+	return 1;
+}
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
new file mode 100644
index 00000000..ae8a64f9
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -0,0 +1,1037 @@
+/* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
+ */
+/*
+ *
+ * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include <linux/device.h>
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_drv.h"
+
+#include <linux/console.h>
+#include <linux/module.h>
+#include "drm_crtc_helper.h"
+
+static int i915_modeset __read_mostly = -1;
+module_param_named(modeset, i915_modeset, int, 0400);
+MODULE_PARM_DESC(modeset,
+		"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
+		"1=on, -1=force vga console preference [default])");
+
+unsigned int i915_fbpercrtc __always_unused = 0;
+module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
+
+int i915_panel_ignore_lid __read_mostly = 0;
+module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
+MODULE_PARM_DESC(panel_ignore_lid,
+		"Override lid status (0=autodetect [default], 1=lid open, "
+		"-1=lid closed)");
+
+unsigned int i915_powersave __read_mostly = 1;
+module_param_named(powersave, i915_powersave, int, 0600);
+MODULE_PARM_DESC(powersave,
+		"Enable powersavings, fbc, downclocking, etc. (default: true)");
+
+int i915_semaphores __read_mostly = -1;
+module_param_named(semaphores, i915_semaphores, int, 0600);
+MODULE_PARM_DESC(semaphores,
+		"Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
+
+int i915_enable_rc6 __read_mostly = -1;
+module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
+MODULE_PARM_DESC(i915_enable_rc6,
+		"Enable power-saving render C-state 6. "
+		"Different stages can be selected via bitmask values "
+		"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
+		"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
+		"default: -1 (use per-chip default)");
+
+int i915_enable_fbc __read_mostly = -1;
+module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
+MODULE_PARM_DESC(i915_enable_fbc,
+		"Enable frame buffer compression for power savings "
+		"(default: -1 (use per-chip default))");
+
+unsigned int i915_lvds_downclock __read_mostly = 0;
+module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
+MODULE_PARM_DESC(lvds_downclock,
+		"Use panel (LVDS/eDP) downclocking for power savings "
+		"(default: false)");
+
+int i915_panel_use_ssc __read_mostly = -1;
+module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
+MODULE_PARM_DESC(lvds_use_ssc,
+		"Use Spread Spectrum Clock with panels [LVDS/eDP] "
+		"(default: auto from VBT)");
+
+int i915_vbt_sdvo_panel_type __read_mostly = -1;
+module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
+MODULE_PARM_DESC(vbt_sdvo_panel_type,
+		"Override selection of SDVO panel mode in the VBT "
+		"(default: auto)");
+
+static bool i915_try_reset __read_mostly = true;
+module_param_named(reset, i915_try_reset, bool, 0600);
+MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
+
+bool i915_enable_hangcheck __read_mostly = true;
+module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
+MODULE_PARM_DESC(enable_hangcheck,
+		"Periodically check GPU activity for detecting hangs. "
+		"WARNING: Disabling this can cause system wide hangs. "
+		"(default: true)");
+
+int i915_enable_ppgtt __read_mostly = -1;
+module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0600);
+MODULE_PARM_DESC(i915_enable_ppgtt,
+		"Enable PPGTT (default: true)");
+
+static struct drm_driver driver;
+extern int intel_agp_enabled;
+
+#define INTEL_VGA_DEVICE(id, info) {		\
+	.class = PCI_BASE_CLASS_DISPLAY << 16,	\
+	.class_mask = 0xff0000,			\
+	.vendor = 0x8086,			\
+	.device = id,				\
+	.subvendor = PCI_ANY_ID,		\
+	.subdevice = PCI_ANY_ID,		\
+	.driver_data = (unsigned long) info }
+
+static const struct intel_device_info intel_i830_info = {
+	.gen = 2, .is_mobile = 1, .cursor_needs_physical = 1,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+};
+
+static const struct intel_device_info intel_845g_info = {
+	.gen = 2,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+};
+
+static const struct intel_device_info intel_i85x_info = {
+	.gen = 2, .is_i85x = 1, .is_mobile = 1,
+	.cursor_needs_physical = 1,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+};
+
+static const struct intel_device_info intel_i865g_info = {
+	.gen = 2,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+};
+
+static const struct intel_device_info intel_i915g_info = {
+	.gen = 3, .is_i915g = 1, .cursor_needs_physical = 1,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+};
+static const struct intel_device_info intel_i915gm_info = {
+	.gen = 3, .is_mobile = 1,
+	.cursor_needs_physical = 1,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+	.supports_tv = 1,
+};
+static const struct intel_device_info intel_i945g_info = {
+	.gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+};
+static const struct intel_device_info intel_i945gm_info = {
+	.gen = 3, .is_i945gm = 1, .is_mobile = 1,
+	.has_hotplug = 1, .cursor_needs_physical = 1,
+	.has_overlay = 1, .overlay_needs_physical = 1,
+	.supports_tv = 1,
+};
+
+static const struct intel_device_info intel_i965g_info = {
+	.gen = 4, .is_broadwater = 1,
+	.has_hotplug = 1,
+	.has_overlay = 1,
+};
+
+static const struct intel_device_info intel_i965gm_info = {
+	.gen = 4, .is_crestline = 1,
+	.is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
+	.has_overlay = 1,
+	.supports_tv = 1,
+};
+
+static const struct intel_device_info intel_g33_info = {
+	.gen = 3, .is_g33 = 1,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_overlay = 1,
+};
+
+static const struct intel_device_info intel_g45_info = {
+	.gen = 4, .is_g4x = 1, .need_gfx_hws = 1,
+	.has_pipe_cxsr = 1, .has_hotplug = 1,
+	.has_bsd_ring = 1,
+};
+
+static const struct intel_device_info intel_gm45_info = {
+	.gen = 4, .is_g4x = 1,
+	.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
+	.has_pipe_cxsr = 1, .has_hotplug = 1,
+	.supports_tv = 1,
+	.has_bsd_ring = 1,
+};
+
+static const struct intel_device_info intel_pineview_info = {
+	.gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_overlay = 1,
+};
+
+static const struct intel_device_info intel_ironlake_d_info = {
+	.gen = 5,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_bsd_ring = 1,
+};
+
+static const struct intel_device_info intel_ironlake_m_info = {
+	.gen = 5, .is_mobile = 1,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_fbc = 1,
+	.has_bsd_ring = 1,
+};
+
+static const struct intel_device_info intel_sandybridge_d_info = {
+	.gen = 6,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_bsd_ring = 1,
+	.has_blt_ring = 1,
+	.has_llc = 1,
+};
+
+static const struct intel_device_info intel_sandybridge_m_info = {
+	.gen = 6, .is_mobile = 1,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_fbc = 1,
+	.has_bsd_ring = 1,
+	.has_blt_ring = 1,
+	.has_llc = 1,
+};
+
+static const struct intel_device_info intel_ivybridge_d_info = {
+	.is_ivybridge = 1, .gen = 7,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_bsd_ring = 1,
+	.has_blt_ring = 1,
+	.has_llc = 1,
+};
+
+static const struct intel_device_info intel_ivybridge_m_info = {
+	.is_ivybridge = 1, .gen = 7, .is_mobile = 1,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.has_fbc = 0,	/* FBC is not enabled on Ivybridge mobile yet */
+	.has_bsd_ring = 1,
+	.has_blt_ring = 1,
+	.has_llc = 1,
+};
+
+static const struct pci_device_id pciidlist[] = {		/* aka */
+	INTEL_VGA_DEVICE(0x3577, &intel_i830_info),		/* I830_M */
+	INTEL_VGA_DEVICE(0x2562, &intel_845g_info),		/* 845_G */
+	INTEL_VGA_DEVICE(0x3582, &intel_i85x_info),		/* I855_GM */
+	INTEL_VGA_DEVICE(0x358e, &intel_i85x_info),
+	INTEL_VGA_DEVICE(0x2572, &intel_i865g_info),		/* I865_G */
+	INTEL_VGA_DEVICE(0x2582, &intel_i915g_info),		/* I915_G */
+	INTEL_VGA_DEVICE(0x258a, &intel_i915g_info),		/* E7221_G */
+	INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info),		/* I915_GM */
+	INTEL_VGA_DEVICE(0x2772, &intel_i945g_info),		/* I945_G */
+	INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info),		/* I945_GM */
+	INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info),		/* I945_GME */
+	INTEL_VGA_DEVICE(0x2972, &intel_i965g_info),		/* I946_GZ */
+	INTEL_VGA_DEVICE(0x2982, &intel_i965g_info),		/* G35_G */
+	INTEL_VGA_DEVICE(0x2992, &intel_i965g_info),		/* I965_Q */
+	INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info),		/* I965_G */
+	INTEL_VGA_DEVICE(0x29b2, &intel_g33_info),		/* Q35_G */
+	INTEL_VGA_DEVICE(0x29c2, &intel_g33_info),		/* G33_G */
+	INTEL_VGA_DEVICE(0x29d2, &intel_g33_info),		/* Q33_G */
+	INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info),		/* I965_GM */
+	INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info),		/* I965_GME */
+	INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info),		/* GM45_G */
+	INTEL_VGA_DEVICE(0x2e02, &intel_g45_info),		/* IGD_E_G */
+	INTEL_VGA_DEVICE(0x2e12, &intel_g45_info),		/* Q45_G */
+	INTEL_VGA_DEVICE(0x2e22, &intel_g45_info),		/* G45_G */
+	INTEL_VGA_DEVICE(0x2e32, &intel_g45_info),		/* G41_G */
+	INTEL_VGA_DEVICE(0x2e42, &intel_g45_info),		/* B43_G */
+	INTEL_VGA_DEVICE(0x2e92, &intel_g45_info),		/* B43_G.1 */
+	INTEL_VGA_DEVICE(0xa001, &intel_pineview_info),
+	INTEL_VGA_DEVICE(0xa011, &intel_pineview_info),
+	INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info),
+	INTEL_VGA_DEVICE(0x0046, &intel_ironlake_m_info),
+	INTEL_VGA_DEVICE(0x0102, &intel_sandybridge_d_info),
+	INTEL_VGA_DEVICE(0x0112, &intel_sandybridge_d_info),
+	INTEL_VGA_DEVICE(0x0122, &intel_sandybridge_d_info),
+	INTEL_VGA_DEVICE(0x0106, &intel_sandybridge_m_info),
+	INTEL_VGA_DEVICE(0x0116, &intel_sandybridge_m_info),
+	INTEL_VGA_DEVICE(0x0126, &intel_sandybridge_m_info),
+	INTEL_VGA_DEVICE(0x010A, &intel_sandybridge_d_info),
+	INTEL_VGA_DEVICE(0x0156, &intel_ivybridge_m_info), /* GT1 mobile */
+	INTEL_VGA_DEVICE(0x0166, &intel_ivybridge_m_info), /* GT2 mobile */
+	INTEL_VGA_DEVICE(0x0152, &intel_ivybridge_d_info), /* GT1 desktop */
+	INTEL_VGA_DEVICE(0x0162, &intel_ivybridge_d_info), /* GT2 desktop */
+	INTEL_VGA_DEVICE(0x015a, &intel_ivybridge_d_info), /* GT1 server */
+	INTEL_VGA_DEVICE(0x016a, &intel_ivybridge_d_info), /* GT2 server */
+	{0, 0, 0}
+};
+
+#if defined(CONFIG_DRM_I915_KMS)
+MODULE_DEVICE_TABLE(pci, pciidlist);
+#endif
+
+#define INTEL_PCH_DEVICE_ID_MASK	0xff00
+#define INTEL_PCH_IBX_DEVICE_ID_TYPE	0x3b00
+#define INTEL_PCH_CPT_DEVICE_ID_TYPE	0x1c00
+#define INTEL_PCH_PPT_DEVICE_ID_TYPE	0x1e00
+
+void intel_detect_pch(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct pci_dev *pch;
+
+	/*
+	 * The reason to probe ISA bridge instead of Dev31:Fun0 is to
+	 * make graphics device passthrough work easy for VMM, that only
+	 * need to expose ISA bridge to let driver know the real hardware
+	 * underneath. This is a requirement from virtualization team.
+	 */
+	pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
+	if (pch) {
+		if (pch->vendor == PCI_VENDOR_ID_INTEL) {
+			int id;
+			id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
+
+			if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_IBX;
+				DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
+			} else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_CPT;
+				DRM_DEBUG_KMS("Found CougarPoint PCH\n");
+			} else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
+				/* PantherPoint is CPT compatible */
+				dev_priv->pch_type = PCH_CPT;
+				DRM_DEBUG_KMS("Found PatherPoint PCH\n");
+			}
+		}
+		pci_dev_put(pch);
+	}
+}
+
+void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
+{
+	int count;
+
+	count = 0;
+	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1))
+		udelay(10);
+
+	I915_WRITE_NOTRACE(FORCEWAKE, 1);
+	POSTING_READ(FORCEWAKE);
+
+	count = 0;
+	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1) == 0)
+		udelay(10);
+}
+
+void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
+{
+	int count;
+
+	count = 0;
+	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1))
+		udelay(10);
+
+	I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 1);
+	POSTING_READ(FORCEWAKE_MT);
+
+	count = 0;
+	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1) == 0)
+		udelay(10);
+}
+
+/*
+ * Generally this is called implicitly by the register read function. However,
+ * if some sequence requires the GT to not power down then this function should
+ * be called at the beginning of the sequence followed by a call to
+ * gen6_gt_force_wake_put() at the end of the sequence.
+ */
+void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
+{
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
+	if (dev_priv->forcewake_count++ == 0)
+		dev_priv->display.force_wake_get(dev_priv);
+	spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
+}
+
+static void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv)
+{
+	u32 gtfifodbg;
+	gtfifodbg = I915_READ_NOTRACE(GTFIFODBG);
+	if (WARN(gtfifodbg & GT_FIFO_CPU_ERROR_MASK,
+	     "MMIO read or write has been dropped %x\n", gtfifodbg))
+		I915_WRITE_NOTRACE(GTFIFODBG, GT_FIFO_CPU_ERROR_MASK);
+}
+
+void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
+{
+	I915_WRITE_NOTRACE(FORCEWAKE, 0);
+	/* The below doubles as a POSTING_READ */
+	gen6_gt_check_fifodbg(dev_priv);
+}
+
+void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv)
+{
+	I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 0);
+	/* The below doubles as a POSTING_READ */
+	gen6_gt_check_fifodbg(dev_priv);
+}
+
+/*
+ * see gen6_gt_force_wake_get()
+ */
+void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
+{
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
+	if (--dev_priv->forcewake_count == 0)
+		dev_priv->display.force_wake_put(dev_priv);
+	spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
+}
+
+int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
+{
+	int ret = 0;
+
+	if (dev_priv->gt_fifo_count < GT_FIFO_NUM_RESERVED_ENTRIES) {
+		int loop = 500;
+		u32 fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
+		while (fifo <= GT_FIFO_NUM_RESERVED_ENTRIES && loop--) {
+			udelay(10);
+			fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
+		}
+		if (WARN_ON(loop < 0 && fifo <= GT_FIFO_NUM_RESERVED_ENTRIES))
+			++ret;
+		dev_priv->gt_fifo_count = fifo;
+	}
+	dev_priv->gt_fifo_count--;
+
+	return ret;
+}
+
+static int i915_drm_freeze(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	drm_kms_helper_poll_disable(dev);
+
+	pci_save_state(dev->pdev);
+
+	/* If KMS is active, we do the leavevt stuff here */
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		int error = i915_gem_idle(dev);
+		if (error) {
+			dev_err(&dev->pdev->dev,
+				"GEM idle failed, resume might fail\n");
+			return error;
+		}
+		drm_irq_uninstall(dev);
+	}
+
+	i915_save_state(dev);
+
+	intel_opregion_fini(dev);
+
+	/* Modeset on resume, not lid events */
+	dev_priv->modeset_on_lid = 0;
+
+	console_lock();
+	intel_fbdev_set_suspend(dev, 1);
+	console_unlock();
+
+	return 0;
+}
+
+int i915_suspend(struct drm_device *dev, pm_message_t state)
+{
+	int error;
+
+	if (!dev || !dev->dev_private) {
+		DRM_ERROR("dev: %p\n", dev);
+		DRM_ERROR("DRM not initialized, aborting suspend.\n");
+		return -ENODEV;
+	}
+
+	if (state.event == PM_EVENT_PRETHAW)
+		return 0;
+
+
+	if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
+		return 0;
+
+	error = i915_drm_freeze(dev);
+	if (error)
+		return error;
+
+	if (state.event == PM_EVENT_SUSPEND) {
+		/* Shut down the device */
+		pci_disable_device(dev->pdev);
+		pci_set_power_state(dev->pdev, PCI_D3hot);
+	}
+
+	return 0;
+}
+
+static int i915_drm_thaw(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int error = 0;
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		mutex_lock(&dev->struct_mutex);
+		i915_gem_restore_gtt_mappings(dev);
+		mutex_unlock(&dev->struct_mutex);
+	}
+
+	i915_restore_state(dev);
+	intel_opregion_setup(dev);
+
+	/* KMS EnterVT equivalent */
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		mutex_lock(&dev->struct_mutex);
+		dev_priv->mm.suspended = 0;
+
+		error = i915_gem_init_hw(dev);
+		mutex_unlock(&dev->struct_mutex);
+
+		if (HAS_PCH_SPLIT(dev))
+			ironlake_init_pch_refclk(dev);
+
+		drm_mode_config_reset(dev);
+		drm_irq_install(dev);
+
+		/* Resume the modeset for every activated CRTC */
+		mutex_lock(&dev->mode_config.mutex);
+		drm_helper_resume_force_mode(dev);
+		mutex_unlock(&dev->mode_config.mutex);
+
+		if (IS_IRONLAKE_M(dev))
+			ironlake_enable_rc6(dev);
+	}
+
+	intel_opregion_init(dev);
+
+	dev_priv->modeset_on_lid = 0;
+
+	console_lock();
+	intel_fbdev_set_suspend(dev, 0);
+	console_unlock();
+	return error;
+}
+
+int i915_resume(struct drm_device *dev)
+{
+	int ret;
+
+	if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
+		return 0;
+
+	if (pci_enable_device(dev->pdev))
+		return -EIO;
+
+	pci_set_master(dev->pdev);
+
+	ret = i915_drm_thaw(dev);
+	if (ret)
+		return ret;
+
+	drm_kms_helper_poll_enable(dev);
+	return 0;
+}
+
+static int i8xx_do_reset(struct drm_device *dev, u8 flags)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (IS_I85X(dev))
+		return -ENODEV;
+
+	I915_WRITE(D_STATE, I915_READ(D_STATE) | DSTATE_GFX_RESET_I830);
+	POSTING_READ(D_STATE);
+
+	if (IS_I830(dev) || IS_845G(dev)) {
+		I915_WRITE(DEBUG_RESET_I830,
+			   DEBUG_RESET_DISPLAY |
+			   DEBUG_RESET_RENDER |
+			   DEBUG_RESET_FULL);
+		POSTING_READ(DEBUG_RESET_I830);
+		msleep(1);
+
+		I915_WRITE(DEBUG_RESET_I830, 0);
+		POSTING_READ(DEBUG_RESET_I830);
+	}
+
+	msleep(1);
+
+	I915_WRITE(D_STATE, I915_READ(D_STATE) & ~DSTATE_GFX_RESET_I830);
+	POSTING_READ(D_STATE);
+
+	return 0;
+}
+
+static int i965_reset_complete(struct drm_device *dev)
+{
+	u8 gdrst;
+	pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
+	return gdrst & 0x1;
+}
+
+static int i965_do_reset(struct drm_device *dev, u8 flags)
+{
+	u8 gdrst;
+
+	/*
+	 * Set the domains we want to reset (GRDOM/bits 2 and 3) as
+	 * well as the reset bit (GR/bit 0).  Setting the GR bit
+	 * triggers the reset; when done, the hardware will clear it.
+	 */
+	pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
+	pci_write_config_byte(dev->pdev, I965_GDRST, gdrst | flags | 0x1);
+
+	return wait_for(i965_reset_complete(dev), 500);
+}
+
+static int ironlake_do_reset(struct drm_device *dev, u8 flags)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 gdrst = I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR);
+	I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR, gdrst | flags | 0x1);
+	return wait_for(I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & 0x1, 500);
+}
+
+static int gen6_do_reset(struct drm_device *dev, u8 flags)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int	ret;
+	unsigned long irqflags;
+
+	/* Hold gt_lock across reset to prevent any register access
+	 * with forcewake not set correctly
+	 */
+	spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
+
+	/* Reset the chip */
+
+	/* GEN6_GDRST is not in the gt power well, no need to check
+	 * for fifo space for the write or forcewake the chip for
+	 * the read
+	 */
+	I915_WRITE_NOTRACE(GEN6_GDRST, GEN6_GRDOM_FULL);
+
+	/* Spin waiting for the device to ack the reset request */
+	ret = wait_for((I915_READ_NOTRACE(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500);
+
+	/* If reset with a user forcewake, try to restore, otherwise turn it off */
+	if (dev_priv->forcewake_count)
+		dev_priv->display.force_wake_get(dev_priv);
+	else
+		dev_priv->display.force_wake_put(dev_priv);
+
+	/* Restore fifo count */
+	dev_priv->gt_fifo_count = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
+
+	spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
+	return ret;
+}
+
+/**
+ * i915_reset - reset chip after a hang
+ * @dev: drm device to reset
+ * @flags: reset domains
+ *
+ * Reset the chip.  Useful if a hang is detected. Returns zero on successful
+ * reset or otherwise an error code.
+ *
+ * Procedure is fairly simple:
+ *   - reset the chip using the reset reg
+ *   - re-init context state
+ *   - re-init hardware status page
+ *   - re-init ring buffer
+ *   - re-init interrupt state
+ *   - re-init display
+ */
+int i915_reset(struct drm_device *dev, u8 flags)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	/*
+	 * We really should only reset the display subsystem if we actually
+	 * need to
+	 */
+	bool need_display = true;
+	int ret;
+
+	if (!i915_try_reset)
+		return 0;
+
+	if (!mutex_trylock(&dev->struct_mutex))
+		return -EBUSY;
+
+	i915_gem_reset(dev);
+
+	ret = -ENODEV;
+	if (get_seconds() - dev_priv->last_gpu_reset < 5) {
+		DRM_ERROR("GPU hanging too fast, declaring wedged!\n");
+	} else switch (INTEL_INFO(dev)->gen) {
+	case 7:
+	case 6:
+		ret = gen6_do_reset(dev, flags);
+		break;
+	case 5:
+		ret = ironlake_do_reset(dev, flags);
+		break;
+	case 4:
+		ret = i965_do_reset(dev, flags);
+		break;
+	case 2:
+		ret = i8xx_do_reset(dev, flags);
+		break;
+	}
+	dev_priv->last_gpu_reset = get_seconds();
+	if (ret) {
+		DRM_ERROR("Failed to reset chip.\n");
+		mutex_unlock(&dev->struct_mutex);
+		return ret;
+	}
+
+	/* Ok, now get things going again... */
+
+	/*
+	 * Everything depends on having the GTT running, so we need to start
+	 * there.  Fortunately we don't need to do this unless we reset the
+	 * chip at a PCI level.
+	 *
+	 * Next we need to restore the context, but we don't use those
+	 * yet either...
+	 *
+	 * Ring buffer needs to be re-initialized in the KMS case, or if X
+	 * was running at the time of the reset (i.e. we weren't VT
+	 * switched away).
+	 */
+	if (drm_core_check_feature(dev, DRIVER_MODESET) ||
+			!dev_priv->mm.suspended) {
+		dev_priv->mm.suspended = 0;
+
+		i915_gem_init_swizzling(dev);
+
+		dev_priv->ring[RCS].init(&dev_priv->ring[RCS]);
+		if (HAS_BSD(dev))
+		    dev_priv->ring[VCS].init(&dev_priv->ring[VCS]);
+		if (HAS_BLT(dev))
+		    dev_priv->ring[BCS].init(&dev_priv->ring[BCS]);
+
+		i915_gem_init_ppgtt(dev);
+
+		mutex_unlock(&dev->struct_mutex);
+		drm_irq_uninstall(dev);
+		drm_mode_config_reset(dev);
+		drm_irq_install(dev);
+		mutex_lock(&dev->struct_mutex);
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	/*
+	 * Perform a full modeset as on later generations, e.g. Ironlake, we may
+	 * need to retrain the display link and cannot just restore the register
+	 * values.
+	 */
+	if (need_display) {
+		mutex_lock(&dev->mode_config.mutex);
+		drm_helper_resume_force_mode(dev);
+		mutex_unlock(&dev->mode_config.mutex);
+	}
+
+	return 0;
+}
+
+
+static int __devinit
+i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	/* Only bind to function 0 of the device. Early generations
+	 * used function 1 as a placeholder for multi-head. This causes
+	 * us confusion instead, especially on the systems where both
+	 * functions have the same PCI-ID!
+	 */
+	if (PCI_FUNC(pdev->devfn))
+		return -ENODEV;
+
+	return drm_get_pci_dev(pdev, ent, &driver);
+}
+
+static void
+i915_pci_remove(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+
+	drm_put_dev(dev);
+}
+
+static int i915_pm_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+	int error;
+
+	if (!drm_dev || !drm_dev->dev_private) {
+		dev_err(dev, "DRM not initialized, aborting suspend.\n");
+		return -ENODEV;
+	}
+
+	if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
+		return 0;
+
+	error = i915_drm_freeze(drm_dev);
+	if (error)
+		return error;
+
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+static int i915_pm_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+	return i915_resume(drm_dev);
+}
+
+static int i915_pm_freeze(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+	if (!drm_dev || !drm_dev->dev_private) {
+		dev_err(dev, "DRM not initialized, aborting suspend.\n");
+		return -ENODEV;
+	}
+
+	return i915_drm_freeze(drm_dev);
+}
+
+static int i915_pm_thaw(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+	return i915_drm_thaw(drm_dev);
+}
+
+static int i915_pm_poweroff(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+	return i915_drm_freeze(drm_dev);
+}
+
+static const struct dev_pm_ops i915_pm_ops = {
+	.suspend = i915_pm_suspend,
+	.resume = i915_pm_resume,
+	.freeze = i915_pm_freeze,
+	.thaw = i915_pm_thaw,
+	.poweroff = i915_pm_poweroff,
+	.restore = i915_pm_resume,
+};
+
+static struct vm_operations_struct i915_gem_vm_ops = {
+	.fault = i915_gem_fault,
+	.open = drm_gem_vm_open,
+	.close = drm_gem_vm_close,
+};
+
+static const struct file_operations i915_driver_fops = {
+	.owner = THIS_MODULE,
+	.open = drm_open,
+	.release = drm_release,
+	.unlocked_ioctl = drm_ioctl,
+	.mmap = drm_gem_mmap,
+	.poll = drm_poll,
+	.fasync = drm_fasync,
+	.read = drm_read,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = i915_compat_ioctl,
+#endif
+	.llseek = noop_llseek,
+};
+
+static struct drm_driver driver = {
+	/* Don't use MTRRs here; the Xserver or userspace app should
+	 * deal with them for Intel hardware.
+	 */
+	.driver_features =
+	    DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
+	    DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM,
+	.load = i915_driver_load,
+	.unload = i915_driver_unload,
+	.open = i915_driver_open,
+	.lastclose = i915_driver_lastclose,
+	.preclose = i915_driver_preclose,
+	.postclose = i915_driver_postclose,
+
+	/* Used in place of i915_pm_ops for non-DRIVER_MODESET */
+	.suspend = i915_suspend,
+	.resume = i915_resume,
+
+	.device_is_agp = i915_driver_device_is_agp,
+	.reclaim_buffers = drm_core_reclaim_buffers,
+	.master_create = i915_master_create,
+	.master_destroy = i915_master_destroy,
+#if defined(CONFIG_DEBUG_FS)
+	.debugfs_init = i915_debugfs_init,
+	.debugfs_cleanup = i915_debugfs_cleanup,
+#endif
+	.gem_init_object = i915_gem_init_object,
+	.gem_free_object = i915_gem_free_object,
+	.gem_vm_ops = &i915_gem_vm_ops,
+	.dumb_create = i915_gem_dumb_create,
+	.dumb_map_offset = i915_gem_mmap_gtt,
+	.dumb_destroy = i915_gem_dumb_destroy,
+	.ioctls = i915_ioctls,
+	.fops = &i915_driver_fops,
+	.name = DRIVER_NAME,
+	.desc = DRIVER_DESC,
+	.date = DRIVER_DATE,
+	.major = DRIVER_MAJOR,
+	.minor = DRIVER_MINOR,
+	.patchlevel = DRIVER_PATCHLEVEL,
+};
+
+static struct pci_driver i915_pci_driver = {
+	.name = DRIVER_NAME,
+	.id_table = pciidlist,
+	.probe = i915_pci_probe,
+	.remove = i915_pci_remove,
+	.driver.pm = &i915_pm_ops,
+};
+
+static int __init i915_init(void)
+{
+	if (!intel_agp_enabled) {
+		DRM_ERROR("drm/i915 can't work without intel_agp module!\n");
+		return -ENODEV;
+	}
+
+	driver.num_ioctls = i915_max_ioctl;
+
+	/*
+	 * If CONFIG_DRM_I915_KMS is set, default to KMS unless
+	 * explicitly disabled with the module pararmeter.
+	 *
+	 * Otherwise, just follow the parameter (defaulting to off).
+	 *
+	 * Allow optional vga_text_mode_force boot option to override
+	 * the default behavior.
+	 */
+#if defined(CONFIG_DRM_I915_KMS)
+	if (i915_modeset != 0)
+		driver.driver_features |= DRIVER_MODESET;
+#endif
+	if (i915_modeset == 1)
+		driver.driver_features |= DRIVER_MODESET;
+
+#ifdef CONFIG_VGA_CONSOLE
+	if (vgacon_text_force() && i915_modeset == -1)
+		driver.driver_features &= ~DRIVER_MODESET;
+#endif
+
+	if (!(driver.driver_features & DRIVER_MODESET))
+		driver.get_vblank_timestamp = NULL;
+
+	return drm_pci_init(&driver, &i915_pci_driver);
+}
+
+static void __exit i915_exit(void)
+{
+	drm_pci_exit(&driver, &i915_pci_driver);
+}
+
+module_init(i915_init);
+module_exit(i915_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL and additional rights");
+
+#define __i915_read(x, y) \
+u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
+	u##x val = 0; \
+	if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
+		unsigned long irqflags; \
+		spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \
+		if (dev_priv->forcewake_count == 0) \
+			dev_priv->display.force_wake_get(dev_priv); \
+		val = read##y(dev_priv->regs + reg); \
+		if (dev_priv->forcewake_count == 0) \
+			dev_priv->display.force_wake_put(dev_priv); \
+		spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \
+	} else { \
+		val = read##y(dev_priv->regs + reg); \
+	} \
+	trace_i915_reg_rw(false, reg, val, sizeof(val)); \
+	return val; \
+}
+
+__i915_read(8, b)
+__i915_read(16, w)
+__i915_read(32, l)
+__i915_read(64, q)
+#undef __i915_read
+
+#define __i915_write(x, y) \
+void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val) { \
+	u32 __fifo_ret = 0; \
+	trace_i915_reg_rw(true, reg, val, sizeof(val)); \
+	if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
+		__fifo_ret = __gen6_gt_wait_for_fifo(dev_priv); \
+	} \
+	write##y(val, dev_priv->regs + reg); \
+	if (unlikely(__fifo_ret)) { \
+		gen6_gt_check_fifodbg(dev_priv); \
+	} \
+}
+__i915_write(8, b)
+__i915_write(16, w)
+__i915_write(32, l)
+__i915_write(64, q)
+#undef __i915_write
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
new file mode 100644
index 00000000..5fabc6c3
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -0,0 +1,1497 @@
+/* i915_drv.h -- Private header for the I915 driver -*- linux-c -*-
+ */
+/*
+ *
+ * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _I915_DRV_H_
+#define _I915_DRV_H_
+
+#include "i915_reg.h"
+#include "intel_bios.h"
+#include "intel_ringbuffer.h"
+#include <linux/io-mapping.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <drm/intel-gtt.h>
+#include <linux/backlight.h>
+
+/* General customization:
+ */
+
+#define DRIVER_AUTHOR		"Tungsten Graphics, Inc."
+
+#define DRIVER_NAME		"i915"
+#define DRIVER_DESC		"Intel Graphics"
+#define DRIVER_DATE		"20080730"
+
+enum pipe {
+	PIPE_A = 0,
+	PIPE_B,
+	PIPE_C,
+	I915_MAX_PIPES
+};
+#define pipe_name(p) ((p) + 'A')
+
+enum plane {
+	PLANE_A = 0,
+	PLANE_B,
+	PLANE_C,
+};
+#define plane_name(p) ((p) + 'A')
+
+#define I915_GEM_GPU_DOMAINS	(~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+
+#define for_each_pipe(p) for ((p) = 0; (p) < dev_priv->num_pipe; (p)++)
+
+/* Interface history:
+ *
+ * 1.1: Original.
+ * 1.2: Add Power Management
+ * 1.3: Add vblank support
+ * 1.4: Fix cmdbuffer path, add heap destroy
+ * 1.5: Add vblank pipe configuration
+ * 1.6: - New ioctl for scheduling buffer swaps on vertical blank
+ *      - Support vertical blank on secondary display pipe
+ */
+#define DRIVER_MAJOR		1
+#define DRIVER_MINOR		6
+#define DRIVER_PATCHLEVEL	0
+
+#define WATCH_COHERENCY	0
+#define WATCH_LISTS	0
+
+#define I915_GEM_PHYS_CURSOR_0 1
+#define I915_GEM_PHYS_CURSOR_1 2
+#define I915_GEM_PHYS_OVERLAY_REGS 3
+#define I915_MAX_PHYS_OBJECT (I915_GEM_PHYS_OVERLAY_REGS)
+
+struct drm_i915_gem_phys_object {
+	int id;
+	struct page **page_list;
+	drm_dma_handle_t *handle;
+	struct drm_i915_gem_object *cur_obj;
+};
+
+struct mem_block {
+	struct mem_block *next;
+	struct mem_block *prev;
+	int start;
+	int size;
+	struct drm_file *file_priv; /* NULL: free, -1: heap, other: real files */
+};
+
+struct opregion_header;
+struct opregion_acpi;
+struct opregion_swsci;
+struct opregion_asle;
+struct drm_i915_private;
+
+struct intel_opregion {
+	struct opregion_header *header;
+	struct opregion_acpi *acpi;
+	struct opregion_swsci *swsci;
+	struct opregion_asle *asle;
+	void *vbt;
+	u32 __iomem *lid_state;
+};
+#define OPREGION_SIZE            (8*1024)
+
+struct intel_overlay;
+struct intel_overlay_error_state;
+
+struct drm_i915_master_private {
+	drm_local_map_t *sarea;
+	struct _drm_i915_sarea *sarea_priv;
+};
+#define I915_FENCE_REG_NONE -1
+#define I915_MAX_NUM_FENCES 16
+/* 16 fences + sign bit for FENCE_REG_NONE */
+#define I915_MAX_NUM_FENCE_BITS 5
+
+struct drm_i915_fence_reg {
+	struct list_head lru_list;
+	struct drm_i915_gem_object *obj;
+	uint32_t setup_seqno;
+	int pin_count;
+};
+
+struct sdvo_device_mapping {
+	u8 initialized;
+	u8 dvo_port;
+	u8 slave_addr;
+	u8 dvo_wiring;
+	u8 i2c_pin;
+	u8 ddc_pin;
+};
+
+struct intel_display_error_state;
+
+struct drm_i915_error_state {
+	u32 eir;
+	u32 pgtbl_er;
+	u32 pipestat[I915_MAX_PIPES];
+	u32 tail[I915_NUM_RINGS];
+	u32 head[I915_NUM_RINGS];
+	u32 ipeir[I915_NUM_RINGS];
+	u32 ipehr[I915_NUM_RINGS];
+	u32 instdone[I915_NUM_RINGS];
+	u32 acthd[I915_NUM_RINGS];
+	u32 semaphore_mboxes[I915_NUM_RINGS][I915_NUM_RINGS - 1];
+	/* our own tracking of ring head and tail */
+	u32 cpu_ring_head[I915_NUM_RINGS];
+	u32 cpu_ring_tail[I915_NUM_RINGS];
+	u32 error; /* gen6+ */
+	u32 instpm[I915_NUM_RINGS];
+	u32 instps[I915_NUM_RINGS];
+	u32 instdone1;
+	u32 seqno[I915_NUM_RINGS];
+	u64 bbaddr;
+	u32 fault_reg[I915_NUM_RINGS];
+	u32 done_reg;
+	u32 faddr[I915_NUM_RINGS];
+	u64 fence[I915_MAX_NUM_FENCES];
+	struct timeval time;
+	struct drm_i915_error_ring {
+		struct drm_i915_error_object {
+			int page_count;
+			u32 gtt_offset;
+			u32 *pages[0];
+		} *ringbuffer, *batchbuffer;
+		struct drm_i915_error_request {
+			long jiffies;
+			u32 seqno;
+			u32 tail;
+		} *requests;
+		int num_requests;
+	} ring[I915_NUM_RINGS];
+	struct drm_i915_error_buffer {
+		u32 size;
+		u32 name;
+		u32 seqno;
+		u32 gtt_offset;
+		u32 read_domains;
+		u32 write_domain;
+		s32 fence_reg:I915_MAX_NUM_FENCE_BITS;
+		s32 pinned:2;
+		u32 tiling:2;
+		u32 dirty:1;
+		u32 purgeable:1;
+		s32 ring:4;
+		u32 cache_level:2;
+	} *active_bo, *pinned_bo;
+	u32 active_bo_count, pinned_bo_count;
+	struct intel_overlay_error_state *overlay;
+	struct intel_display_error_state *display;
+};
+
+struct drm_i915_display_funcs {
+	void (*dpms)(struct drm_crtc *crtc, int mode);
+	bool (*fbc_enabled)(struct drm_device *dev);
+	void (*enable_fbc)(struct drm_crtc *crtc, unsigned long interval);
+	void (*disable_fbc)(struct drm_device *dev);
+	int (*get_display_clock_speed)(struct drm_device *dev);
+	int (*get_fifo_size)(struct drm_device *dev, int plane);
+	void (*update_wm)(struct drm_device *dev);
+	void (*update_sprite_wm)(struct drm_device *dev, int pipe,
+				 uint32_t sprite_width, int pixel_size);
+	int (*crtc_mode_set)(struct drm_crtc *crtc,
+			     struct drm_display_mode *mode,
+			     struct drm_display_mode *adjusted_mode,
+			     int x, int y,
+			     struct drm_framebuffer *old_fb);
+	void (*write_eld)(struct drm_connector *connector,
+			  struct drm_crtc *crtc);
+	void (*fdi_link_train)(struct drm_crtc *crtc);
+	void (*init_clock_gating)(struct drm_device *dev);
+	void (*init_pch_clock_gating)(struct drm_device *dev);
+	int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc,
+			  struct drm_framebuffer *fb,
+			  struct drm_i915_gem_object *obj);
+	int (*update_plane)(struct drm_crtc *crtc, struct drm_framebuffer *fb,
+			    int x, int y);
+	void (*force_wake_get)(struct drm_i915_private *dev_priv);
+	void (*force_wake_put)(struct drm_i915_private *dev_priv);
+	/* clock updates for mode set */
+	/* cursor updates */
+	/* render clock increase/decrease */
+	/* display clock increase/decrease */
+	/* pll clock increase/decrease */
+};
+
+struct intel_device_info {
+	u8 gen;
+	u8 is_mobile:1;
+	u8 is_i85x:1;
+	u8 is_i915g:1;
+	u8 is_i945gm:1;
+	u8 is_g33:1;
+	u8 need_gfx_hws:1;
+	u8 is_g4x:1;
+	u8 is_pineview:1;
+	u8 is_broadwater:1;
+	u8 is_crestline:1;
+	u8 is_ivybridge:1;
+	u8 has_fbc:1;
+	u8 has_pipe_cxsr:1;
+	u8 has_hotplug:1;
+	u8 cursor_needs_physical:1;
+	u8 has_overlay:1;
+	u8 overlay_needs_physical:1;
+	u8 supports_tv:1;
+	u8 has_bsd_ring:1;
+	u8 has_blt_ring:1;
+	u8 has_llc:1;
+};
+
+#define I915_PPGTT_PD_ENTRIES 512
+#define I915_PPGTT_PT_ENTRIES 1024
+struct i915_hw_ppgtt {
+	unsigned num_pd_entries;
+	struct page **pt_pages;
+	uint32_t pd_offset;
+	dma_addr_t *pt_dma_addr;
+	dma_addr_t scratch_page_dma_addr;
+};
+
+enum no_fbc_reason {
+	FBC_NO_OUTPUT, /* no outputs enabled to compress */
+	FBC_STOLEN_TOO_SMALL, /* not enough space to hold compressed buffers */
+	FBC_UNSUPPORTED_MODE, /* interlace or doublescanned mode */
+	FBC_MODE_TOO_LARGE, /* mode too large for compression */
+	FBC_BAD_PLANE, /* fbc not supported on plane */
+	FBC_NOT_TILED, /* buffer not tiled */
+	FBC_MULTIPLE_PIPES, /* more than one pipe active */
+	FBC_MODULE_PARAM,
+};
+
+enum intel_pch {
+	PCH_IBX,	/* Ibexpeak PCH */
+	PCH_CPT,	/* Cougarpoint PCH */
+};
+
+#define QUIRK_PIPEA_FORCE (1<<0)
+#define QUIRK_LVDS_SSC_DISABLE (1<<1)
+
+struct intel_fbdev;
+struct intel_fbc_work;
+
+struct intel_gmbus {
+	struct i2c_adapter adapter;
+	bool force_bit;
+	bool has_gpio;
+	u32 reg0;
+	u32 gpio_reg;
+	struct i2c_algo_bit_data bit_algo;
+	struct drm_i915_private *dev_priv;
+};
+
+typedef struct drm_i915_private {
+	struct drm_device *dev;
+
+	const struct intel_device_info *info;
+
+	int has_gem;
+	int relative_constants_mode;
+
+	void __iomem *regs;
+	/** gt_fifo_count and the subsequent register write are synchronized
+	 * with dev->struct_mutex. */
+	unsigned gt_fifo_count;
+	/** forcewake_count is protected by gt_lock */
+	unsigned forcewake_count;
+	/** gt_lock is also taken in irq contexts. */
+	struct spinlock gt_lock;
+
+	struct intel_gmbus *gmbus;
+
+	/** gmbus_mutex protects against concurrent usage of the single hw gmbus
+	 * controller on different i2c buses. */
+	struct mutex gmbus_mutex;
+
+	struct pci_dev *bridge_dev;
+	struct intel_ring_buffer ring[I915_NUM_RINGS];
+	uint32_t next_seqno;
+
+	drm_dma_handle_t *status_page_dmah;
+	uint32_t counter;
+	drm_local_map_t hws_map;
+	struct drm_i915_gem_object *pwrctx;
+	struct drm_i915_gem_object *renderctx;
+
+	struct resource mch_res;
+
+	unsigned int cpp;
+	int back_offset;
+	int front_offset;
+	int current_page;
+	int page_flipping;
+
+	atomic_t irq_received;
+
+	/* protects the irq masks */
+	spinlock_t irq_lock;
+	/** Cached value of IMR to avoid reads in updating the bitfield */
+	u32 pipestat[2];
+	u32 irq_mask;
+	u32 gt_irq_mask;
+	u32 pch_irq_mask;
+
+	u32 hotplug_supported_mask;
+	struct work_struct hotplug_work;
+
+	int tex_lru_log_granularity;
+	int allow_batchbuffer;
+	unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
+	int vblank_pipe;
+	int num_pipe;
+
+	/* For hangcheck timer */
+#define DRM_I915_HANGCHECK_PERIOD 1500 /* in ms */
+	struct timer_list hangcheck_timer;
+	int hangcheck_count;
+	uint32_t last_acthd;
+	uint32_t last_acthd_bsd;
+	uint32_t last_acthd_blt;
+	uint32_t last_instdone;
+	uint32_t last_instdone1;
+
+	unsigned long cfb_size;
+	unsigned int cfb_fb;
+	enum plane cfb_plane;
+	int cfb_y;
+	struct intel_fbc_work *fbc_work;
+
+	struct intel_opregion opregion;
+
+	/* overlay */
+	struct intel_overlay *overlay;
+	bool sprite_scaling_enabled;
+
+	/* LVDS info */
+	int backlight_level;  /* restore backlight to this value */
+	bool backlight_enabled;
+	struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */
+	struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */
+
+	/* Feature bits from the VBIOS */
+	unsigned int int_tv_support:1;
+	unsigned int lvds_dither:1;
+	unsigned int lvds_vbt:1;
+	unsigned int int_crt_support:1;
+	unsigned int lvds_use_ssc:1;
+	unsigned int display_clock_mode:1;
+	int lvds_ssc_freq;
+	struct {
+		int rate;
+		int lanes;
+		int preemphasis;
+		int vswing;
+
+		bool initialized;
+		bool support;
+		int bpp;
+		struct edp_power_seq pps;
+	} edp;
+	bool no_aux_handshake;
+
+	struct notifier_block lid_notifier;
+
+	int crt_ddc_pin;
+	struct drm_i915_fence_reg fence_regs[I915_MAX_NUM_FENCES]; /* assume 965 */
+	int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
+	int num_fence_regs; /* 8 on pre-965, 16 otherwise */
+
+	unsigned int fsb_freq, mem_freq, is_ddr3;
+
+	spinlock_t error_lock;
+	struct drm_i915_error_state *first_error;
+	struct work_struct error_work;
+	struct completion error_completion;
+	struct workqueue_struct *wq;
+
+	/* Display functions */
+	struct drm_i915_display_funcs display;
+
+	/* PCH chipset type */
+	enum intel_pch pch_type;
+
+	unsigned long quirks;
+
+	/* Register state */
+	bool modeset_on_lid;
+	u8 saveLBB;
+	u32 saveDSPACNTR;
+	u32 saveDSPBCNTR;
+	u32 saveDSPARB;
+	u32 saveHWS;
+	u32 savePIPEACONF;
+	u32 savePIPEBCONF;
+	u32 savePIPEASRC;
+	u32 savePIPEBSRC;
+	u32 saveFPA0;
+	u32 saveFPA1;
+	u32 saveDPLL_A;
+	u32 saveDPLL_A_MD;
+	u32 saveHTOTAL_A;
+	u32 saveHBLANK_A;
+	u32 saveHSYNC_A;
+	u32 saveVTOTAL_A;
+	u32 saveVBLANK_A;
+	u32 saveVSYNC_A;
+	u32 saveBCLRPAT_A;
+	u32 saveTRANSACONF;
+	u32 saveTRANS_HTOTAL_A;
+	u32 saveTRANS_HBLANK_A;
+	u32 saveTRANS_HSYNC_A;
+	u32 saveTRANS_VTOTAL_A;
+	u32 saveTRANS_VBLANK_A;
+	u32 saveTRANS_VSYNC_A;
+	u32 savePIPEASTAT;
+	u32 saveDSPASTRIDE;
+	u32 saveDSPASIZE;
+	u32 saveDSPAPOS;
+	u32 saveDSPAADDR;
+	u32 saveDSPASURF;
+	u32 saveDSPATILEOFF;
+	u32 savePFIT_PGM_RATIOS;
+	u32 saveBLC_HIST_CTL;
+	u32 saveBLC_PWM_CTL;
+	u32 saveBLC_PWM_CTL2;
+	u32 saveBLC_CPU_PWM_CTL;
+	u32 saveBLC_CPU_PWM_CTL2;
+	u32 saveFPB0;
+	u32 saveFPB1;
+	u32 saveDPLL_B;
+	u32 saveDPLL_B_MD;
+	u32 saveHTOTAL_B;
+	u32 saveHBLANK_B;
+	u32 saveHSYNC_B;
+	u32 saveVTOTAL_B;
+	u32 saveVBLANK_B;
+	u32 saveVSYNC_B;
+	u32 saveBCLRPAT_B;
+	u32 saveTRANSBCONF;
+	u32 saveTRANS_HTOTAL_B;
+	u32 saveTRANS_HBLANK_B;
+	u32 saveTRANS_HSYNC_B;
+	u32 saveTRANS_VTOTAL_B;
+	u32 saveTRANS_VBLANK_B;
+	u32 saveTRANS_VSYNC_B;
+	u32 savePIPEBSTAT;
+	u32 saveDSPBSTRIDE;
+	u32 saveDSPBSIZE;
+	u32 saveDSPBPOS;
+	u32 saveDSPBADDR;
+	u32 saveDSPBSURF;
+	u32 saveDSPBTILEOFF;
+	u32 saveVGA0;
+	u32 saveVGA1;
+	u32 saveVGA_PD;
+	u32 saveVGACNTRL;
+	u32 saveADPA;
+	u32 saveLVDS;
+	u32 savePP_ON_DELAYS;
+	u32 savePP_OFF_DELAYS;
+	u32 saveDVOA;
+	u32 saveDVOB;
+	u32 saveDVOC;
+	u32 savePP_ON;
+	u32 savePP_OFF;
+	u32 savePP_CONTROL;
+	u32 savePP_DIVISOR;
+	u32 savePFIT_CONTROL;
+	u32 save_palette_a[256];
+	u32 save_palette_b[256];
+	u32 saveDPFC_CB_BASE;
+	u32 saveFBC_CFB_BASE;
+	u32 saveFBC_LL_BASE;
+	u32 saveFBC_CONTROL;
+	u32 saveFBC_CONTROL2;
+	u32 saveIER;
+	u32 saveIIR;
+	u32 saveIMR;
+	u32 saveDEIER;
+	u32 saveDEIMR;
+	u32 saveGTIER;
+	u32 saveGTIMR;
+	u32 saveFDI_RXA_IMR;
+	u32 saveFDI_RXB_IMR;
+	u32 saveCACHE_MODE_0;
+	u32 saveMI_ARB_STATE;
+	u32 saveSWF0[16];
+	u32 saveSWF1[16];
+	u32 saveSWF2[3];
+	u8 saveMSR;
+	u8 saveSR[8];
+	u8 saveGR[25];
+	u8 saveAR_INDEX;
+	u8 saveAR[21];
+	u8 saveDACMASK;
+	u8 saveCR[37];
+	uint64_t saveFENCE[I915_MAX_NUM_FENCES];
+	u32 saveCURACNTR;
+	u32 saveCURAPOS;
+	u32 saveCURABASE;
+	u32 saveCURBCNTR;
+	u32 saveCURBPOS;
+	u32 saveCURBBASE;
+	u32 saveCURSIZE;
+	u32 saveDP_B;
+	u32 saveDP_C;
+	u32 saveDP_D;
+	u32 savePIPEA_GMCH_DATA_M;
+	u32 savePIPEB_GMCH_DATA_M;
+	u32 savePIPEA_GMCH_DATA_N;
+	u32 savePIPEB_GMCH_DATA_N;
+	u32 savePIPEA_DP_LINK_M;
+	u32 savePIPEB_DP_LINK_M;
+	u32 savePIPEA_DP_LINK_N;
+	u32 savePIPEB_DP_LINK_N;
+	u32 saveFDI_RXA_CTL;
+	u32 saveFDI_TXA_CTL;
+	u32 saveFDI_RXB_CTL;
+	u32 saveFDI_TXB_CTL;
+	u32 savePFA_CTL_1;
+	u32 savePFB_CTL_1;
+	u32 savePFA_WIN_SZ;
+	u32 savePFB_WIN_SZ;
+	u32 savePFA_WIN_POS;
+	u32 savePFB_WIN_POS;
+	u32 savePCH_DREF_CONTROL;
+	u32 saveDISP_ARB_CTL;
+	u32 savePIPEA_DATA_M1;
+	u32 savePIPEA_DATA_N1;
+	u32 savePIPEA_LINK_M1;
+	u32 savePIPEA_LINK_N1;
+	u32 savePIPEB_DATA_M1;
+	u32 savePIPEB_DATA_N1;
+	u32 savePIPEB_LINK_M1;
+	u32 savePIPEB_LINK_N1;
+	u32 saveMCHBAR_RENDER_STANDBY;
+	u32 savePCH_PORT_HOTPLUG;
+
+	struct {
+		/** Bridge to intel-gtt-ko */
+		const struct intel_gtt *gtt;
+		/** Memory allocator for GTT stolen memory */
+		struct drm_mm stolen;
+		/** Memory allocator for GTT */
+		struct drm_mm gtt_space;
+		/** List of all objects in gtt_space. Used to restore gtt
+		 * mappings on resume */
+		struct list_head gtt_list;
+
+		/** Usable portion of the GTT for GEM */
+		unsigned long gtt_start;
+		unsigned long gtt_mappable_end;
+		unsigned long gtt_end;
+
+		struct io_mapping *gtt_mapping;
+		int gtt_mtrr;
+
+		/** PPGTT used for aliasing the PPGTT with the GTT */
+		struct i915_hw_ppgtt *aliasing_ppgtt;
+
+		struct shrinker inactive_shrinker;
+
+		/**
+		 * List of objects currently involved in rendering.
+		 *
+		 * Includes buffers having the contents of their GPU caches
+		 * flushed, not necessarily primitives.  last_rendering_seqno
+		 * represents when the rendering involved will be completed.
+		 *
+		 * A reference is held on the buffer while on this list.
+		 */
+		struct list_head active_list;
+
+		/**
+		 * List of objects which are not in the ringbuffer but which
+		 * still have a write_domain which needs to be flushed before
+		 * unbinding.
+		 *
+		 * last_rendering_seqno is 0 while an object is in this list.
+		 *
+		 * A reference is held on the buffer while on this list.
+		 */
+		struct list_head flushing_list;
+
+		/**
+		 * LRU list of objects which are not in the ringbuffer and
+		 * are ready to unbind, but are still in the GTT.
+		 *
+		 * last_rendering_seqno is 0 while an object is in this list.
+		 *
+		 * A reference is not held on the buffer while on this list,
+		 * as merely being GTT-bound shouldn't prevent its being
+		 * freed, and we'll pull it off the list in the free path.
+		 */
+		struct list_head inactive_list;
+
+		/**
+		 * LRU list of objects which are not in the ringbuffer but
+		 * are still pinned in the GTT.
+		 */
+		struct list_head pinned_list;
+
+		/** LRU list of objects with fence regs on them. */
+		struct list_head fence_list;
+
+		/**
+		 * List of objects currently pending being freed.
+		 *
+		 * These objects are no longer in use, but due to a signal
+		 * we were prevented from freeing them at the appointed time.
+		 */
+		struct list_head deferred_free_list;
+
+		/**
+		 * We leave the user IRQ off as much as possible,
+		 * but this means that requests will finish and never
+		 * be retired once the system goes idle. Set a timer to
+		 * fire periodically while the ring is running. When it
+		 * fires, go retire requests.
+		 */
+		struct delayed_work retire_work;
+
+		/**
+		 * Are we in a non-interruptible section of code like
+		 * modesetting?
+		 */
+		bool interruptible;
+
+		/**
+		 * Flag if the X Server, and thus DRM, is not currently in
+		 * control of the device.
+		 *
+		 * This is set between LeaveVT and EnterVT.  It needs to be
+		 * replaced with a semaphore.  It also needs to be
+		 * transitioned away from for kernel modesetting.
+		 */
+		int suspended;
+
+		/**
+		 * Flag if the hardware appears to be wedged.
+		 *
+		 * This is set when attempts to idle the device timeout.
+		 * It prevents command submission from occurring and makes
+		 * every pending request fail
+		 */
+		atomic_t wedged;
+
+		/** Bit 6 swizzling required for X tiling */
+		uint32_t bit_6_swizzle_x;
+		/** Bit 6 swizzling required for Y tiling */
+		uint32_t bit_6_swizzle_y;
+
+		/* storage for physical objects */
+		struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT];
+
+		/* accounting, useful for userland debugging */
+		size_t gtt_total;
+		size_t mappable_gtt_total;
+		size_t object_memory;
+		u32 object_count;
+	} mm;
+	struct sdvo_device_mapping sdvo_mappings[2];
+	/* indicate whether the LVDS_BORDER should be enabled or not */
+	unsigned int lvds_border_bits;
+	/* Panel fitter placement and size for Ironlake+ */
+	u32 pch_pf_pos, pch_pf_size;
+
+	struct drm_crtc *plane_to_crtc_mapping[3];
+	struct drm_crtc *pipe_to_crtc_mapping[3];
+	wait_queue_head_t pending_flip_queue;
+	bool flip_pending_is_done;
+
+	/* Reclocking support */
+	bool render_reclock_avail;
+	bool lvds_downclock_avail;
+	/* indicates the reduced downclock for LVDS*/
+	int lvds_downclock;
+	struct work_struct idle_work;
+	struct timer_list idle_timer;
+	bool busy;
+	u16 orig_clock;
+	int child_dev_num;
+	struct child_device_config *child_dev;
+	struct drm_connector *int_lvds_connector;
+	struct drm_connector *int_edp_connector;
+
+	bool mchbar_need_disable;
+
+	struct work_struct rps_work;
+	spinlock_t rps_lock;
+	u32 pm_iir;
+
+	u8 cur_delay;
+	u8 min_delay;
+	u8 max_delay;
+	u8 fmax;
+	u8 fstart;
+
+	u64 last_count1;
+	unsigned long last_time1;
+	unsigned long chipset_power;
+	u64 last_count2;
+	struct timespec last_time2;
+	unsigned long gfx_power;
+	int c_m;
+	int r_t;
+	u8 corr;
+	spinlock_t *mchdev_lock;
+
+	enum no_fbc_reason no_fbc_reason;
+
+	struct drm_mm_node *compressed_fb;
+	struct drm_mm_node *compressed_llb;
+
+	unsigned long last_gpu_reset;
+
+	/* list of fbdev register on this device */
+	struct intel_fbdev *fbdev;
+
+	struct backlight_device *backlight;
+
+	struct drm_property *broadcast_rgb_property;
+	struct drm_property *force_audio_property;
+} drm_i915_private_t;
+
+enum hdmi_force_audio {
+	HDMI_AUDIO_OFF_DVI = -2,	/* no aux data for HDMI-DVI converter */
+	HDMI_AUDIO_OFF,			/* force turn off HDMI audio */
+	HDMI_AUDIO_AUTO,		/* trust EDID */
+	HDMI_AUDIO_ON,			/* force turn on HDMI audio */
+};
+
+enum i915_cache_level {
+	I915_CACHE_NONE,
+	I915_CACHE_LLC,
+	I915_CACHE_LLC_MLC, /* gen6+ */
+};
+
+struct drm_i915_gem_object {
+	struct drm_gem_object base;
+
+	/** Current space allocated to this object in the GTT, if any. */
+	struct drm_mm_node *gtt_space;
+	struct list_head gtt_list;
+
+	/** This object's place on the active/flushing/inactive lists */
+	struct list_head ring_list;
+	struct list_head mm_list;
+	/** This object's place on GPU write list */
+	struct list_head gpu_write_list;
+	/** This object's place in the batchbuffer or on the eviction list */
+	struct list_head exec_list;
+
+	/**
+	 * This is set if the object is on the active or flushing lists
+	 * (has pending rendering), and is not set if it's on inactive (ready
+	 * to be unbound).
+	 */
+	unsigned int active:1;
+
+	/**
+	 * This is set if the object has been written to since last bound
+	 * to the GTT
+	 */
+	unsigned int dirty:1;
+
+	/**
+	 * This is set if the object has been written to since the last
+	 * GPU flush.
+	 */
+	unsigned int pending_gpu_write:1;
+
+	/**
+	 * Fence register bits (if any) for this object.  Will be set
+	 * as needed when mapped into the GTT.
+	 * Protected by dev->struct_mutex.
+	 */
+	signed int fence_reg:I915_MAX_NUM_FENCE_BITS;
+
+	/**
+	 * Advice: are the backing pages purgeable?
+	 */
+	unsigned int madv:2;
+
+	/**
+	 * Current tiling mode for the object.
+	 */
+	unsigned int tiling_mode:2;
+	unsigned int tiling_changed:1;
+
+	/** How many users have pinned this object in GTT space. The following
+	 * users can each hold at most one reference: pwrite/pread, pin_ioctl
+	 * (via user_pin_count), execbuffer (objects are not allowed multiple
+	 * times for the same batchbuffer), and the framebuffer code. When
+	 * switching/pageflipping, the framebuffer code has at most two buffers
+	 * pinned per crtc.
+	 *
+	 * In the worst case this is 1 + 1 + 1 + 2*2 = 7. That would fit into 3
+	 * bits with absolutely no headroom. So use 4 bits. */
+	unsigned int pin_count:4;
+#define DRM_I915_GEM_OBJECT_MAX_PIN_COUNT 0xf
+
+	/**
+	 * Is the object at the current location in the gtt mappable and
+	 * fenceable? Used to avoid costly recalculations.
+	 */
+	unsigned int map_and_fenceable:1;
+
+	/**
+	 * Whether the current gtt mapping needs to be mappable (and isn't just
+	 * mappable by accident). Track pin and fault separate for a more
+	 * accurate mappable working set.
+	 */
+	unsigned int fault_mappable:1;
+	unsigned int pin_mappable:1;
+
+	/*
+	 * Is the GPU currently using a fence to access this buffer,
+	 */
+	unsigned int pending_fenced_gpu_access:1;
+	unsigned int fenced_gpu_access:1;
+
+	unsigned int cache_level:2;
+
+	unsigned int has_aliasing_ppgtt_mapping:1;
+
+	struct page **pages;
+
+	/**
+	 * DMAR support
+	 */
+	struct scatterlist *sg_list;
+	int num_sg;
+
+	/**
+	 * Used for performing relocations during execbuffer insertion.
+	 */
+	struct hlist_node exec_node;
+	unsigned long exec_handle;
+	struct drm_i915_gem_exec_object2 *exec_entry;
+
+	/**
+	 * Current offset of the object in GTT space.
+	 *
+	 * This is the same as gtt_space->start
+	 */
+	uint32_t gtt_offset;
+
+	/** Breadcrumb of last rendering to the buffer. */
+	uint32_t last_rendering_seqno;
+	struct intel_ring_buffer *ring;
+
+	/** Breadcrumb of last fenced GPU access to the buffer. */
+	uint32_t last_fenced_seqno;
+	struct intel_ring_buffer *last_fenced_ring;
+
+	/** Current tiling stride for the object, if it's tiled. */
+	uint32_t stride;
+
+	/** Record of address bit 17 of each page at last unbind. */
+	unsigned long *bit_17;
+
+
+	/**
+	 * If present, while GEM_DOMAIN_CPU is in the read domain this array
+	 * flags which individual pages are valid.
+	 */
+	uint8_t *page_cpu_valid;
+
+	/** User space pin count and filp owning the pin */
+	uint32_t user_pin_count;
+	struct drm_file *pin_filp;
+
+	/** for phy allocated objects */
+	struct drm_i915_gem_phys_object *phys_obj;
+
+	/**
+	 * Number of crtcs where this object is currently the fb, but
+	 * will be page flipped away on the next vblank.  When it
+	 * reaches 0, dev_priv->pending_flip_queue will be woken up.
+	 */
+	atomic_t pending_flip;
+};
+
+#define to_intel_bo(x) container_of(x, struct drm_i915_gem_object, base)
+
+/**
+ * Request queue structure.
+ *
+ * The request queue allows us to note sequence numbers that have been emitted
+ * and may be associated with active buffers to be retired.
+ *
+ * By keeping this list, we can avoid having to do questionable
+ * sequence-number comparisons on buffer last_rendering_seqnos, and associate
+ * an emission time with seqnos for tracking how far ahead of the GPU we are.
+ */
+struct drm_i915_gem_request {
+	/** On Which ring this request was generated */
+	struct intel_ring_buffer *ring;
+
+	/** GEM sequence number associated with this request. */
+	uint32_t seqno;
+
+	/** Postion in the ringbuffer of the end of the request */
+	u32 tail;
+
+	/** Time at which this request was emitted, in jiffies. */
+	unsigned long emitted_jiffies;
+
+	/** global list entry for this request */
+	struct list_head list;
+
+	struct drm_i915_file_private *file_priv;
+	/** file_priv list entry for this request */
+	struct list_head client_list;
+};
+
+struct drm_i915_file_private {
+	struct {
+		struct spinlock lock;
+		struct list_head request_list;
+	} mm;
+};
+
+#define INTEL_INFO(dev)	(((struct drm_i915_private *) (dev)->dev_private)->info)
+
+#define IS_I830(dev)		((dev)->pci_device == 0x3577)
+#define IS_845G(dev)		((dev)->pci_device == 0x2562)
+#define IS_I85X(dev)		(INTEL_INFO(dev)->is_i85x)
+#define IS_I865G(dev)		((dev)->pci_device == 0x2572)
+#define IS_I915G(dev)		(INTEL_INFO(dev)->is_i915g)
+#define IS_I915GM(dev)		((dev)->pci_device == 0x2592)
+#define IS_I945G(dev)		((dev)->pci_device == 0x2772)
+#define IS_I945GM(dev)		(INTEL_INFO(dev)->is_i945gm)
+#define IS_BROADWATER(dev)	(INTEL_INFO(dev)->is_broadwater)
+#define IS_CRESTLINE(dev)	(INTEL_INFO(dev)->is_crestline)
+#define IS_GM45(dev)		((dev)->pci_device == 0x2A42)
+#define IS_G4X(dev)		(INTEL_INFO(dev)->is_g4x)
+#define IS_PINEVIEW_G(dev)	((dev)->pci_device == 0xa001)
+#define IS_PINEVIEW_M(dev)	((dev)->pci_device == 0xa011)
+#define IS_PINEVIEW(dev)	(INTEL_INFO(dev)->is_pineview)
+#define IS_G33(dev)		(INTEL_INFO(dev)->is_g33)
+#define IS_IRONLAKE_D(dev)	((dev)->pci_device == 0x0042)
+#define IS_IRONLAKE_M(dev)	((dev)->pci_device == 0x0046)
+#define IS_IVYBRIDGE(dev)	(INTEL_INFO(dev)->is_ivybridge)
+#define IS_MOBILE(dev)		(INTEL_INFO(dev)->is_mobile)
+
+/*
+ * The genX designation typically refers to the render engine, so render
+ * capability related checks should use IS_GEN, while display and other checks
+ * have their own (e.g. HAS_PCH_SPLIT for ILK+ display, IS_foo for particular
+ * chips, etc.).
+ */
+#define IS_GEN2(dev)	(INTEL_INFO(dev)->gen == 2)
+#define IS_GEN3(dev)	(INTEL_INFO(dev)->gen == 3)
+#define IS_GEN4(dev)	(INTEL_INFO(dev)->gen == 4)
+#define IS_GEN5(dev)	(INTEL_INFO(dev)->gen == 5)
+#define IS_GEN6(dev)	(INTEL_INFO(dev)->gen == 6)
+#define IS_GEN7(dev)	(INTEL_INFO(dev)->gen == 7)
+
+#define HAS_BSD(dev)            (INTEL_INFO(dev)->has_bsd_ring)
+#define HAS_BLT(dev)            (INTEL_INFO(dev)->has_blt_ring)
+#define HAS_LLC(dev)            (INTEL_INFO(dev)->has_llc)
+#define I915_NEED_GFX_HWS(dev)	(INTEL_INFO(dev)->need_gfx_hws)
+
+#define HAS_ALIASING_PPGTT(dev)	(INTEL_INFO(dev)->gen >=6)
+
+#define HAS_OVERLAY(dev)		(INTEL_INFO(dev)->has_overlay)
+#define OVERLAY_NEEDS_PHYSICAL(dev)	(INTEL_INFO(dev)->overlay_needs_physical)
+
+/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
+ * rows, which changed the alignment requirements and fence programming.
+ */
+#define HAS_128_BYTE_Y_TILING(dev) (!IS_GEN2(dev) && !(IS_I915G(dev) || \
+						      IS_I915GM(dev)))
+#define SUPPORTS_DIGITAL_OUTPUTS(dev)	(!IS_GEN2(dev) && !IS_PINEVIEW(dev))
+#define SUPPORTS_INTEGRATED_HDMI(dev)	(IS_G4X(dev) || IS_GEN5(dev))
+#define SUPPORTS_INTEGRATED_DP(dev)	(IS_G4X(dev) || IS_GEN5(dev))
+#define SUPPORTS_EDP(dev)		(IS_IRONLAKE_M(dev))
+#define SUPPORTS_TV(dev)		(INTEL_INFO(dev)->supports_tv)
+#define I915_HAS_HOTPLUG(dev)		 (INTEL_INFO(dev)->has_hotplug)
+/* dsparb controlled by hw only */
+#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
+
+#define HAS_FW_BLC(dev) (INTEL_INFO(dev)->gen > 2)
+#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr)
+#define I915_HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc)
+
+#define HAS_PCH_SPLIT(dev) (IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev))
+#define HAS_PIPE_CONTROL(dev) (INTEL_INFO(dev)->gen >= 5)
+
+#define INTEL_PCH_TYPE(dev) (((struct drm_i915_private *)(dev)->dev_private)->pch_type)
+#define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
+#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
+
+#include "i915_trace.h"
+
+/**
+ * RC6 is a special power stage which allows the GPU to enter an very
+ * low-voltage mode when idle, using down to 0V while at this stage.  This
+ * stage is entered automatically when the GPU is idle when RC6 support is
+ * enabled, and as soon as new workload arises GPU wakes up automatically as well.
+ *
+ * There are different RC6 modes available in Intel GPU, which differentiate
+ * among each other with the latency required to enter and leave RC6 and
+ * voltage consumed by the GPU in different states.
+ *
+ * The combination of the following flags define which states GPU is allowed
+ * to enter, while RC6 is the normal RC6 state, RC6p is the deep RC6, and
+ * RC6pp is deepest RC6. Their support by hardware varies according to the
+ * GPU, BIOS, chipset and platform. RC6 is usually the safest one and the one
+ * which brings the most power savings; deeper states save more power, but
+ * require higher latency to switch to and wake up.
+ */
+#define INTEL_RC6_ENABLE			(1<<0)
+#define INTEL_RC6p_ENABLE			(1<<1)
+#define INTEL_RC6pp_ENABLE			(1<<2)
+
+extern struct drm_ioctl_desc i915_ioctls[];
+extern int i915_max_ioctl;
+extern unsigned int i915_fbpercrtc __always_unused;
+extern int i915_panel_ignore_lid __read_mostly;
+extern unsigned int i915_powersave __read_mostly;
+extern int i915_semaphores __read_mostly;
+extern unsigned int i915_lvds_downclock __read_mostly;
+extern int i915_panel_use_ssc __read_mostly;
+extern int i915_vbt_sdvo_panel_type __read_mostly;
+extern int i915_enable_rc6 __read_mostly;
+extern int i915_enable_fbc __read_mostly;
+extern bool i915_enable_hangcheck __read_mostly;
+extern int i915_enable_ppgtt __read_mostly;
+
+extern int i915_suspend(struct drm_device *dev, pm_message_t state);
+extern int i915_resume(struct drm_device *dev);
+extern int i915_master_create(struct drm_device *dev, struct drm_master *master);
+extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master);
+
+				/* i915_dma.c */
+extern void i915_kernel_lost_context(struct drm_device * dev);
+extern int i915_driver_load(struct drm_device *, unsigned long flags);
+extern int i915_driver_unload(struct drm_device *);
+extern int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv);
+extern void i915_driver_lastclose(struct drm_device * dev);
+extern void i915_driver_preclose(struct drm_device *dev,
+				 struct drm_file *file_priv);
+extern void i915_driver_postclose(struct drm_device *dev,
+				  struct drm_file *file_priv);
+extern int i915_driver_device_is_agp(struct drm_device * dev);
+extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
+			      unsigned long arg);
+extern int i915_emit_box(struct drm_device *dev,
+			 struct drm_clip_rect *box,
+			 int DR1, int DR4);
+extern int i915_reset(struct drm_device *dev, u8 flags);
+extern unsigned long i915_chipset_val(struct drm_i915_private *dev_priv);
+extern unsigned long i915_mch_val(struct drm_i915_private *dev_priv);
+extern unsigned long i915_gfx_val(struct drm_i915_private *dev_priv);
+extern void i915_update_gfx_val(struct drm_i915_private *dev_priv);
+
+
+/* i915_irq.c */
+void i915_hangcheck_elapsed(unsigned long data);
+void i915_handle_error(struct drm_device *dev, bool wedged);
+extern int i915_irq_emit(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+extern int i915_irq_wait(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+
+extern void intel_irq_init(struct drm_device *dev);
+
+extern int i915_vblank_pipe_set(struct drm_device *dev, void *data,
+				struct drm_file *file_priv);
+extern int i915_vblank_pipe_get(struct drm_device *dev, void *data,
+				struct drm_file *file_priv);
+extern int i915_vblank_swap(struct drm_device *dev, void *data,
+			    struct drm_file *file_priv);
+
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+void intel_enable_asle(struct drm_device *dev);
+
+#ifdef CONFIG_DEBUG_FS
+extern void i915_destroy_error_state(struct drm_device *dev);
+#else
+#define i915_destroy_error_state(x)
+#endif
+
+
+/* i915_gem.c */
+int i915_gem_init_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+int i915_gem_create_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv);
+int i915_gem_pread_ioctl(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+int i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv);
+int i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+int i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+int i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
+			      struct drm_file *file_priv);
+int i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
+			     struct drm_file *file_priv);
+int i915_gem_execbuffer(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+int i915_gem_execbuffer2(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+int i915_gem_pin_ioctl(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv);
+int i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+int i915_gem_busy_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+int i915_gem_throttle_ioctl(struct drm_device *dev, void *data,
+			    struct drm_file *file_priv);
+int i915_gem_madvise_ioctl(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv);
+int i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv);
+int i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv);
+int i915_gem_set_tiling(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+int i915_gem_get_tiling(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *file_priv);
+void i915_gem_load(struct drm_device *dev);
+int i915_gem_init_object(struct drm_gem_object *obj);
+int __must_check i915_gem_flush_ring(struct intel_ring_buffer *ring,
+				     uint32_t invalidate_domains,
+				     uint32_t flush_domains);
+struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
+						  size_t size);
+void i915_gem_free_object(struct drm_gem_object *obj);
+int __must_check i915_gem_object_pin(struct drm_i915_gem_object *obj,
+				     uint32_t alignment,
+				     bool map_and_fenceable);
+void i915_gem_object_unpin(struct drm_i915_gem_object *obj);
+int __must_check i915_gem_object_unbind(struct drm_i915_gem_object *obj);
+void i915_gem_release_mmap(struct drm_i915_gem_object *obj);
+void i915_gem_lastclose(struct drm_device *dev);
+
+int __must_check i915_mutex_lock_interruptible(struct drm_device *dev);
+int __must_check i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj);
+void i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
+				    struct intel_ring_buffer *ring,
+				    u32 seqno);
+
+int i915_gem_dumb_create(struct drm_file *file_priv,
+			 struct drm_device *dev,
+			 struct drm_mode_create_dumb *args);
+int i915_gem_mmap_gtt(struct drm_file *file_priv, struct drm_device *dev,
+		      uint32_t handle, uint64_t *offset);
+int i915_gem_dumb_destroy(struct drm_file *file_priv, struct drm_device *dev,
+			  uint32_t handle);
+/**
+ * Returns true if seq1 is later than seq2.
+ */
+static inline bool
+i915_seqno_passed(uint32_t seq1, uint32_t seq2)
+{
+	return (int32_t)(seq1 - seq2) >= 0;
+}
+
+u32 i915_gem_next_request_seqno(struct intel_ring_buffer *ring);
+
+int __must_check i915_gem_object_get_fence(struct drm_i915_gem_object *obj,
+					   struct intel_ring_buffer *pipelined);
+int __must_check i915_gem_object_put_fence(struct drm_i915_gem_object *obj);
+
+static inline void
+i915_gem_object_pin_fence(struct drm_i915_gem_object *obj)
+{
+	if (obj->fence_reg != I915_FENCE_REG_NONE) {
+		struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
+		dev_priv->fence_regs[obj->fence_reg].pin_count++;
+	}
+}
+
+static inline void
+i915_gem_object_unpin_fence(struct drm_i915_gem_object *obj)
+{
+	if (obj->fence_reg != I915_FENCE_REG_NONE) {
+		struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
+		dev_priv->fence_regs[obj->fence_reg].pin_count--;
+	}
+}
+
+void i915_gem_retire_requests(struct drm_device *dev);
+void i915_gem_retire_requests_ring(struct intel_ring_buffer *ring);
+
+void i915_gem_reset(struct drm_device *dev);
+void i915_gem_clflush_object(struct drm_i915_gem_object *obj);
+int __must_check i915_gem_object_set_domain(struct drm_i915_gem_object *obj,
+					    uint32_t read_domains,
+					    uint32_t write_domain);
+int __must_check i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj);
+int __must_check i915_gem_init_hw(struct drm_device *dev);
+void i915_gem_init_swizzling(struct drm_device *dev);
+void i915_gem_init_ppgtt(struct drm_device *dev);
+void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
+void i915_gem_do_init(struct drm_device *dev,
+		      unsigned long start,
+		      unsigned long mappable_end,
+		      unsigned long end);
+int __must_check i915_gpu_idle(struct drm_device *dev, bool do_retire);
+int __must_check i915_gem_idle(struct drm_device *dev);
+int __must_check i915_add_request(struct intel_ring_buffer *ring,
+				  struct drm_file *file,
+				  struct drm_i915_gem_request *request);
+int __must_check i915_wait_request(struct intel_ring_buffer *ring,
+				   uint32_t seqno,
+				   bool do_retire);
+int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
+int __must_check
+i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj,
+				  bool write);
+int __must_check
+i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
+				     u32 alignment,
+				     struct intel_ring_buffer *pipelined);
+int i915_gem_attach_phys_object(struct drm_device *dev,
+				struct drm_i915_gem_object *obj,
+				int id,
+				int align);
+void i915_gem_detach_phys_object(struct drm_device *dev,
+				 struct drm_i915_gem_object *obj);
+void i915_gem_free_all_phys_object(struct drm_device *dev);
+void i915_gem_release(struct drm_device *dev, struct drm_file *file);
+
+uint32_t
+i915_gem_get_unfenced_gtt_alignment(struct drm_device *dev,
+				    uint32_t size,
+				    int tiling_mode);
+
+int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj,
+				    enum i915_cache_level cache_level);
+
+/* i915_gem_gtt.c */
+int __must_check i915_gem_init_aliasing_ppgtt(struct drm_device *dev);
+void i915_gem_cleanup_aliasing_ppgtt(struct drm_device *dev);
+void i915_ppgtt_bind_object(struct i915_hw_ppgtt *ppgtt,
+			    struct drm_i915_gem_object *obj,
+			    enum i915_cache_level cache_level);
+void i915_ppgtt_unbind_object(struct i915_hw_ppgtt *ppgtt,
+			      struct drm_i915_gem_object *obj);
+
+void i915_gem_restore_gtt_mappings(struct drm_device *dev);
+int __must_check i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj);
+void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj,
+				enum i915_cache_level cache_level);
+void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj);
+
+/* i915_gem_evict.c */
+int __must_check i915_gem_evict_something(struct drm_device *dev, int min_size,
+					  unsigned alignment, bool mappable);
+int __must_check i915_gem_evict_everything(struct drm_device *dev,
+					   bool purgeable_only);
+int __must_check i915_gem_evict_inactive(struct drm_device *dev,
+					 bool purgeable_only);
+
+/* i915_gem_tiling.c */
+void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
+void i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj);
+void i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj);
+
+/* i915_gem_debug.c */
+void i915_gem_dump_object(struct drm_i915_gem_object *obj, int len,
+			  const char *where, uint32_t mark);
+#if WATCH_LISTS
+int i915_verify_lists(struct drm_device *dev);
+#else
+#define i915_verify_lists(dev) 0
+#endif
+void i915_gem_object_check_coherency(struct drm_i915_gem_object *obj,
+				     int handle);
+void i915_gem_dump_object(struct drm_i915_gem_object *obj, int len,
+			  const char *where, uint32_t mark);
+
+/* i915_debugfs.c */
+int i915_debugfs_init(struct drm_minor *minor);
+void i915_debugfs_cleanup(struct drm_minor *minor);
+
+/* i915_suspend.c */
+extern int i915_save_state(struct drm_device *dev);
+extern int i915_restore_state(struct drm_device *dev);
+
+/* i915_suspend.c */
+extern int i915_save_state(struct drm_device *dev);
+extern int i915_restore_state(struct drm_device *dev);
+
+/* intel_i2c.c */
+extern int intel_setup_gmbus(struct drm_device *dev);
+extern void intel_teardown_gmbus(struct drm_device *dev);
+extern void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed);
+extern void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit);
+extern inline bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter)
+{
+	return container_of(adapter, struct intel_gmbus, adapter)->force_bit;
+}
+extern void intel_i2c_reset(struct drm_device *dev);
+
+/* intel_opregion.c */
+extern int intel_opregion_setup(struct drm_device *dev);
+#ifdef CONFIG_ACPI
+extern void intel_opregion_init(struct drm_device *dev);
+extern void intel_opregion_fini(struct drm_device *dev);
+extern void intel_opregion_asle_intr(struct drm_device *dev);
+extern void intel_opregion_gse_intr(struct drm_device *dev);
+extern void intel_opregion_enable_asle(struct drm_device *dev);
+#else
+static inline void intel_opregion_init(struct drm_device *dev) { return; }
+static inline void intel_opregion_fini(struct drm_device *dev) { return; }
+static inline void intel_opregion_asle_intr(struct drm_device *dev) { return; }
+static inline void intel_opregion_gse_intr(struct drm_device *dev) { return; }
+static inline void intel_opregion_enable_asle(struct drm_device *dev) { return; }
+#endif
+
+/* intel_acpi.c */
+#ifdef CONFIG_ACPI
+extern void intel_register_dsm_handler(void);
+extern void intel_unregister_dsm_handler(void);
+#else
+static inline void intel_register_dsm_handler(void) { return; }
+static inline void intel_unregister_dsm_handler(void) { return; }
+#endif /* CONFIG_ACPI */
+
+/* modesetting */
+extern void intel_modeset_init(struct drm_device *dev);
+extern void intel_modeset_gem_init(struct drm_device *dev);
+extern void intel_modeset_cleanup(struct drm_device *dev);
+extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state);
+extern bool intel_fbc_enabled(struct drm_device *dev);
+extern void intel_disable_fbc(struct drm_device *dev);
+extern bool ironlake_set_drps(struct drm_device *dev, u8 val);
+extern void ironlake_init_pch_refclk(struct drm_device *dev);
+extern void ironlake_enable_rc6(struct drm_device *dev);
+extern void gen6_set_rps(struct drm_device *dev, u8 val);
+extern void intel_detect_pch(struct drm_device *dev);
+extern int intel_trans_dp_port_sel(struct drm_crtc *crtc);
+
+extern void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv);
+extern void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv);
+extern void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv);
+extern void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv);
+
+/* overlay */
+#ifdef CONFIG_DEBUG_FS
+extern struct intel_overlay_error_state *intel_overlay_capture_error_state(struct drm_device *dev);
+extern void intel_overlay_print_error_state(struct seq_file *m, struct intel_overlay_error_state *error);
+
+extern struct intel_display_error_state *intel_display_capture_error_state(struct drm_device *dev);
+extern void intel_display_print_error_state(struct seq_file *m,
+					    struct drm_device *dev,
+					    struct intel_display_error_state *error);
+#endif
+
+#define LP_RING(d) (&((struct drm_i915_private *)(d))->ring[RCS])
+
+#define BEGIN_LP_RING(n) \
+	intel_ring_begin(LP_RING(dev_priv), (n))
+
+#define OUT_RING(x) \
+	intel_ring_emit(LP_RING(dev_priv), x)
+
+#define ADVANCE_LP_RING() \
+	intel_ring_advance(LP_RING(dev_priv))
+
+/**
+ * Lock test for when it's just for synchronization of ring access.
+ *
+ * In that case, we don't need to do it when GEM is initialized as nobody else
+ * has access to the ring.
+ */
+#define RING_LOCK_TEST_WITH_RETURN(dev, file) do {			\
+	if (LP_RING(dev->dev_private)->obj == NULL)			\
+		LOCK_TEST_WITH_RETURN(dev, file);			\
+} while (0)
+
+/* On SNB platform, before reading ring registers forcewake bit
+ * must be set to prevent GT core from power down and stale values being
+ * returned.
+ */
+void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv);
+void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv);
+int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv);
+
+/* We give fast paths for the really cool registers */
+#define NEEDS_FORCE_WAKE(dev_priv, reg) \
+	(((dev_priv)->info->gen >= 6) && \
+	 ((reg) < 0x40000) &&		 \
+	 ((reg) != FORCEWAKE))
+
+#define __i915_read(x, y) \
+	u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg);
+
+__i915_read(8, b)
+__i915_read(16, w)
+__i915_read(32, l)
+__i915_read(64, q)
+#undef __i915_read
+
+#define __i915_write(x, y) \
+	void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val);
+
+__i915_write(8, b)
+__i915_write(16, w)
+__i915_write(32, l)
+__i915_write(64, q)
+#undef __i915_write
+
+#define I915_READ8(reg)		i915_read8(dev_priv, (reg))
+#define I915_WRITE8(reg, val)	i915_write8(dev_priv, (reg), (val))
+
+#define I915_READ16(reg)	i915_read16(dev_priv, (reg))
+#define I915_WRITE16(reg, val)	i915_write16(dev_priv, (reg), (val))
+#define I915_READ16_NOTRACE(reg)	readw(dev_priv->regs + (reg))
+#define I915_WRITE16_NOTRACE(reg, val)	writew(val, dev_priv->regs + (reg))
+
+#define I915_READ(reg)		i915_read32(dev_priv, (reg))
+#define I915_WRITE(reg, val)	i915_write32(dev_priv, (reg), (val))
+#define I915_READ_NOTRACE(reg)		readl(dev_priv->regs + (reg))
+#define I915_WRITE_NOTRACE(reg, val)	writel(val, dev_priv->regs + (reg))
+
+#define I915_WRITE64(reg, val)	i915_write64(dev_priv, (reg), (val))
+#define I915_READ64(reg)	i915_read64(dev_priv, (reg))
+
+#define POSTING_READ(reg)	(void)I915_READ_NOTRACE(reg)
+#define POSTING_READ16(reg)	(void)I915_READ16_NOTRACE(reg)
+
+
+#endif
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
new file mode 100644
index 00000000..0d1e4b7b
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -0,0 +1,4276 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "i915_trace.h"
+#include "intel_drv.h"
+#include <linux/shmem_fs.h>
+#include <linux/slab.h>
+#include <linux/swap.h>
+#include <linux/pci.h>
+
+static __must_check int i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj);
+static void i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj);
+static void i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj);
+static __must_check int i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj,
+							  bool write);
+static __must_check int i915_gem_object_set_cpu_read_domain_range(struct drm_i915_gem_object *obj,
+								  uint64_t offset,
+								  uint64_t size);
+static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_i915_gem_object *obj);
+static __must_check int i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
+						    unsigned alignment,
+						    bool map_and_fenceable);
+static void i915_gem_clear_fence_reg(struct drm_device *dev,
+				     struct drm_i915_fence_reg *reg);
+static int i915_gem_phys_pwrite(struct drm_device *dev,
+				struct drm_i915_gem_object *obj,
+				struct drm_i915_gem_pwrite *args,
+				struct drm_file *file);
+static void i915_gem_free_object_tail(struct drm_i915_gem_object *obj);
+
+static int i915_gem_inactive_shrink(struct shrinker *shrinker,
+				    struct shrink_control *sc);
+static void i915_gem_object_truncate(struct drm_i915_gem_object *obj);
+
+/* some bookkeeping */
+static void i915_gem_info_add_obj(struct drm_i915_private *dev_priv,
+				  size_t size)
+{
+	dev_priv->mm.object_count++;
+	dev_priv->mm.object_memory += size;
+}
+
+static void i915_gem_info_remove_obj(struct drm_i915_private *dev_priv,
+				     size_t size)
+{
+	dev_priv->mm.object_count--;
+	dev_priv->mm.object_memory -= size;
+}
+
+static int
+i915_gem_wait_for_error(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct completion *x = &dev_priv->error_completion;
+	unsigned long flags;
+	int ret;
+
+	if (!atomic_read(&dev_priv->mm.wedged))
+		return 0;
+
+	ret = wait_for_completion_interruptible(x);
+	if (ret)
+		return ret;
+
+	if (atomic_read(&dev_priv->mm.wedged)) {
+		/* GPU is hung, bump the completion count to account for
+		 * the token we just consumed so that we never hit zero and
+		 * end up waiting upon a subsequent completion event that
+		 * will never happen.
+		 */
+		spin_lock_irqsave(&x->wait.lock, flags);
+		x->done++;
+		spin_unlock_irqrestore(&x->wait.lock, flags);
+	}
+	return 0;
+}
+
+int i915_mutex_lock_interruptible(struct drm_device *dev)
+{
+	int ret;
+
+	ret = i915_gem_wait_for_error(dev);
+	if (ret)
+		return ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	WARN_ON(i915_verify_lists(dev));
+	return 0;
+}
+
+static inline bool
+i915_gem_object_is_inactive(struct drm_i915_gem_object *obj)
+{
+	return obj->gtt_space && !obj->active && obj->pin_count == 0;
+}
+
+void i915_gem_do_init(struct drm_device *dev,
+		      unsigned long start,
+		      unsigned long mappable_end,
+		      unsigned long end)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	drm_mm_init(&dev_priv->mm.gtt_space, start, end - start);
+
+	dev_priv->mm.gtt_start = start;
+	dev_priv->mm.gtt_mappable_end = mappable_end;
+	dev_priv->mm.gtt_end = end;
+	dev_priv->mm.gtt_total = end - start;
+	dev_priv->mm.mappable_gtt_total = min(end, mappable_end) - start;
+
+	/* Take over this portion of the GTT */
+	intel_gtt_clear_range(start / PAGE_SIZE, (end-start) / PAGE_SIZE);
+}
+
+int
+i915_gem_init_ioctl(struct drm_device *dev, void *data,
+		    struct drm_file *file)
+{
+	struct drm_i915_gem_init *args = data;
+
+	if (args->gtt_start >= args->gtt_end ||
+	    (args->gtt_end | args->gtt_start) & (PAGE_SIZE - 1))
+		return -EINVAL;
+
+	mutex_lock(&dev->struct_mutex);
+	i915_gem_do_init(dev, args->gtt_start, args->gtt_end, args->gtt_end);
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+int
+i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
+			    struct drm_file *file)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_get_aperture *args = data;
+	struct drm_i915_gem_object *obj;
+	size_t pinned;
+
+	if (!(dev->driver->driver_features & DRIVER_GEM))
+		return -ENODEV;
+
+	pinned = 0;
+	mutex_lock(&dev->struct_mutex);
+	list_for_each_entry(obj, &dev_priv->mm.pinned_list, mm_list)
+		pinned += obj->gtt_space->size;
+	mutex_unlock(&dev->struct_mutex);
+
+	args->aper_size = dev_priv->mm.gtt_total;
+	args->aper_available_size = args->aper_size - pinned;
+
+	return 0;
+}
+
+static int
+i915_gem_create(struct drm_file *file,
+		struct drm_device *dev,
+		uint64_t size,
+		uint32_t *handle_p)
+{
+	struct drm_i915_gem_object *obj;
+	int ret;
+	u32 handle;
+
+	size = roundup(size, PAGE_SIZE);
+	if (size == 0)
+		return -EINVAL;
+
+	/* Allocate the new object */
+	obj = i915_gem_alloc_object(dev, size);
+	if (obj == NULL)
+		return -ENOMEM;
+
+	ret = drm_gem_handle_create(file, &obj->base, &handle);
+	if (ret) {
+		drm_gem_object_release(&obj->base);
+		i915_gem_info_remove_obj(dev->dev_private, obj->base.size);
+		kfree(obj);
+		return ret;
+	}
+
+	/* drop reference from allocate - handle holds it now */
+	drm_gem_object_unreference(&obj->base);
+	trace_i915_gem_object_create(obj);
+
+	*handle_p = handle;
+	return 0;
+}
+
+int
+i915_gem_dumb_create(struct drm_file *file,
+		     struct drm_device *dev,
+		     struct drm_mode_create_dumb *args)
+{
+	/* have to work out size/pitch and return them */
+	args->pitch = ALIGN(args->width * ((args->bpp + 7) / 8), 64);
+	args->size = args->pitch * args->height;
+	return i915_gem_create(file, dev,
+			       args->size, &args->handle);
+}
+
+int i915_gem_dumb_destroy(struct drm_file *file,
+			  struct drm_device *dev,
+			  uint32_t handle)
+{
+	return drm_gem_handle_delete(file, handle);
+}
+
+/**
+ * Creates a new mm object and returns a handle to it.
+ */
+int
+i915_gem_create_ioctl(struct drm_device *dev, void *data,
+		      struct drm_file *file)
+{
+	struct drm_i915_gem_create *args = data;
+	return i915_gem_create(file, dev,
+			       args->size, &args->handle);
+}
+
+static int i915_gem_object_needs_bit17_swizzle(struct drm_i915_gem_object *obj)
+{
+	drm_i915_private_t *dev_priv = obj->base.dev->dev_private;
+
+	return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
+		obj->tiling_mode != I915_TILING_NONE;
+}
+
+/**
+ * This is the fast shmem pread path, which attempts to copy_from_user directly
+ * from the backing pages of the object to the user's address space.  On a
+ * fault, it fails so we can fall back to i915_gem_shmem_pwrite_slow().
+ */
+static int
+i915_gem_shmem_pread_fast(struct drm_device *dev,
+			  struct drm_i915_gem_object *obj,
+			  struct drm_i915_gem_pread *args,
+			  struct drm_file *file)
+{
+	struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
+	ssize_t remain;
+	loff_t offset;
+	char __user *user_data;
+	int page_offset, page_length;
+
+	user_data = (char __user *) (uintptr_t) args->data_ptr;
+	remain = args->size;
+
+	offset = args->offset;
+
+	while (remain > 0) {
+		struct page *page;
+		char *vaddr;
+		int ret;
+
+		/* Operation in this page
+		 *
+		 * page_offset = offset within page
+		 * page_length = bytes to copy for this page
+		 */
+		page_offset = offset_in_page(offset);
+		page_length = remain;
+		if ((page_offset + remain) > PAGE_SIZE)
+			page_length = PAGE_SIZE - page_offset;
+
+		page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
+		if (IS_ERR(page))
+			return PTR_ERR(page);
+
+		vaddr = kmap_atomic(page);
+		ret = __copy_to_user_inatomic(user_data,
+					      vaddr + page_offset,
+					      page_length);
+		kunmap_atomic(vaddr);
+
+		mark_page_accessed(page);
+		page_cache_release(page);
+		if (ret)
+			return -EFAULT;
+
+		remain -= page_length;
+		user_data += page_length;
+		offset += page_length;
+	}
+
+	return 0;
+}
+
+static inline int
+__copy_to_user_swizzled(char __user *cpu_vaddr,
+			const char *gpu_vaddr, int gpu_offset,
+			int length)
+{
+	int ret, cpu_offset = 0;
+
+	while (length > 0) {
+		int cacheline_end = ALIGN(gpu_offset + 1, 64);
+		int this_length = min(cacheline_end - gpu_offset, length);
+		int swizzled_gpu_offset = gpu_offset ^ 64;
+
+		ret = __copy_to_user(cpu_vaddr + cpu_offset,
+				     gpu_vaddr + swizzled_gpu_offset,
+				     this_length);
+		if (ret)
+			return ret + length;
+
+		cpu_offset += this_length;
+		gpu_offset += this_length;
+		length -= this_length;
+	}
+
+	return 0;
+}
+
+static inline int
+__copy_from_user_swizzled(char __user *gpu_vaddr, int gpu_offset,
+			  const char *cpu_vaddr,
+			  int length)
+{
+	int ret, cpu_offset = 0;
+
+	while (length > 0) {
+		int cacheline_end = ALIGN(gpu_offset + 1, 64);
+		int this_length = min(cacheline_end - gpu_offset, length);
+		int swizzled_gpu_offset = gpu_offset ^ 64;
+
+		ret = __copy_from_user(gpu_vaddr + swizzled_gpu_offset,
+				       cpu_vaddr + cpu_offset,
+				       this_length);
+		if (ret)
+			return ret + length;
+
+		cpu_offset += this_length;
+		gpu_offset += this_length;
+		length -= this_length;
+	}
+
+	return 0;
+}
+
+/**
+ * This is the fallback shmem pread path, which allocates temporary storage
+ * in kernel space to copy_to_user into outside of the struct_mutex, so we
+ * can copy out of the object's backing pages while holding the struct mutex
+ * and not take page faults.
+ */
+static int
+i915_gem_shmem_pread_slow(struct drm_device *dev,
+			  struct drm_i915_gem_object *obj,
+			  struct drm_i915_gem_pread *args,
+			  struct drm_file *file)
+{
+	struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
+	char __user *user_data;
+	ssize_t remain;
+	loff_t offset;
+	int shmem_page_offset, page_length, ret;
+	int obj_do_bit17_swizzling, page_do_bit17_swizzling;
+
+	user_data = (char __user *) (uintptr_t) args->data_ptr;
+	remain = args->size;
+
+	obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
+
+	offset = args->offset;
+
+	mutex_unlock(&dev->struct_mutex);
+
+	while (remain > 0) {
+		struct page *page;
+		char *vaddr;
+
+		/* Operation in this page
+		 *
+		 * shmem_page_offset = offset within page in shmem file
+		 * page_length = bytes to copy for this page
+		 */
+		shmem_page_offset = offset_in_page(offset);
+		page_length = remain;
+		if ((shmem_page_offset + page_length) > PAGE_SIZE)
+			page_length = PAGE_SIZE - shmem_page_offset;
+
+		page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
+		if (IS_ERR(page)) {
+			ret = PTR_ERR(page);
+			goto out;
+		}
+
+		page_do_bit17_swizzling = obj_do_bit17_swizzling &&
+			(page_to_phys(page) & (1 << 17)) != 0;
+
+		vaddr = kmap(page);
+		if (page_do_bit17_swizzling)
+			ret = __copy_to_user_swizzled(user_data,
+						      vaddr, shmem_page_offset,
+						      page_length);
+		else
+			ret = __copy_to_user(user_data,
+					     vaddr + shmem_page_offset,
+					     page_length);
+		kunmap(page);
+
+		mark_page_accessed(page);
+		page_cache_release(page);
+
+		if (ret) {
+			ret = -EFAULT;
+			goto out;
+		}
+
+		remain -= page_length;
+		user_data += page_length;
+		offset += page_length;
+	}
+
+out:
+	mutex_lock(&dev->struct_mutex);
+	/* Fixup: Kill any reinstated backing storage pages */
+	if (obj->madv == __I915_MADV_PURGED)
+		i915_gem_object_truncate(obj);
+
+	return ret;
+}
+
+/**
+ * Reads data from the object referenced by handle.
+ *
+ * On error, the contents of *data are undefined.
+ */
+int
+i915_gem_pread_ioctl(struct drm_device *dev, void *data,
+		     struct drm_file *file)
+{
+	struct drm_i915_gem_pread *args = data;
+	struct drm_i915_gem_object *obj;
+	int ret = 0;
+
+	if (args->size == 0)
+		return 0;
+
+	if (!access_ok(VERIFY_WRITE,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size))
+		return -EFAULT;
+
+	ret = fault_in_pages_writeable((char __user *)(uintptr_t)args->data_ptr,
+				       args->size);
+	if (ret)
+		return -EFAULT;
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		return ret;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
+	if (&obj->base == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	/* Bounds check source.  */
+	if (args->offset > obj->base.size ||
+	    args->size > obj->base.size - args->offset) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	trace_i915_gem_object_pread(obj, args->offset, args->size);
+
+	ret = i915_gem_object_set_cpu_read_domain_range(obj,
+							args->offset,
+							args->size);
+	if (ret)
+		goto out;
+
+	ret = -EFAULT;
+	if (!i915_gem_object_needs_bit17_swizzle(obj))
+		ret = i915_gem_shmem_pread_fast(dev, obj, args, file);
+	if (ret == -EFAULT)
+		ret = i915_gem_shmem_pread_slow(dev, obj, args, file);
+
+out:
+	drm_gem_object_unreference(&obj->base);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+/* This is the fast write path which cannot handle
+ * page faults in the source data
+ */
+
+static inline int
+fast_user_write(struct io_mapping *mapping,
+		loff_t page_base, int page_offset,
+		char __user *user_data,
+		int length)
+{
+	char *vaddr_atomic;
+	unsigned long unwritten;
+
+	vaddr_atomic = io_mapping_map_atomic_wc(mapping, page_base);
+	unwritten = __copy_from_user_inatomic_nocache(vaddr_atomic + page_offset,
+						      user_data, length);
+	io_mapping_unmap_atomic(vaddr_atomic);
+	return unwritten;
+}
+
+/* Here's the write path which can sleep for
+ * page faults
+ */
+
+static inline void
+slow_kernel_write(struct io_mapping *mapping,
+		  loff_t gtt_base, int gtt_offset,
+		  struct page *user_page, int user_offset,
+		  int length)
+{
+	char __iomem *dst_vaddr;
+	char *src_vaddr;
+
+	dst_vaddr = io_mapping_map_wc(mapping, gtt_base);
+	src_vaddr = kmap(user_page);
+
+	memcpy_toio(dst_vaddr + gtt_offset,
+		    src_vaddr + user_offset,
+		    length);
+
+	kunmap(user_page);
+	io_mapping_unmap(dst_vaddr);
+}
+
+/**
+ * This is the fast pwrite path, where we copy the data directly from the
+ * user into the GTT, uncached.
+ */
+static int
+i915_gem_gtt_pwrite_fast(struct drm_device *dev,
+			 struct drm_i915_gem_object *obj,
+			 struct drm_i915_gem_pwrite *args,
+			 struct drm_file *file)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	ssize_t remain;
+	loff_t offset, page_base;
+	char __user *user_data;
+	int page_offset, page_length;
+
+	user_data = (char __user *) (uintptr_t) args->data_ptr;
+	remain = args->size;
+
+	offset = obj->gtt_offset + args->offset;
+
+	while (remain > 0) {
+		/* Operation in this page
+		 *
+		 * page_base = page offset within aperture
+		 * page_offset = offset within page
+		 * page_length = bytes to copy for this page
+		 */
+		page_base = offset & PAGE_MASK;
+		page_offset = offset_in_page(offset);
+		page_length = remain;
+		if ((page_offset + remain) > PAGE_SIZE)
+			page_length = PAGE_SIZE - page_offset;
+
+		/* If we get a fault while copying data, then (presumably) our
+		 * source page isn't available.  Return the error and we'll
+		 * retry in the slow path.
+		 */
+		if (fast_user_write(dev_priv->mm.gtt_mapping, page_base,
+				    page_offset, user_data, page_length))
+			return -EFAULT;
+
+		remain -= page_length;
+		user_data += page_length;
+		offset += page_length;
+	}
+
+	return 0;
+}
+
+/**
+ * This is the fallback GTT pwrite path, which uses get_user_pages to pin
+ * the memory and maps it using kmap_atomic for copying.
+ *
+ * This code resulted in x11perf -rgb10text consuming about 10% more CPU
+ * than using i915_gem_gtt_pwrite_fast on a G45 (32-bit).
+ */
+static int
+i915_gem_gtt_pwrite_slow(struct drm_device *dev,
+			 struct drm_i915_gem_object *obj,
+			 struct drm_i915_gem_pwrite *args,
+			 struct drm_file *file)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	ssize_t remain;
+	loff_t gtt_page_base, offset;
+	loff_t first_data_page, last_data_page, num_pages;
+	loff_t pinned_pages, i;
+	struct page **user_pages;
+	struct mm_struct *mm = current->mm;
+	int gtt_page_offset, data_page_offset, data_page_index, page_length;
+	int ret;
+	uint64_t data_ptr = args->data_ptr;
+
+	remain = args->size;
+
+	/* Pin the user pages containing the data.  We can't fault while
+	 * holding the struct mutex, and all of the pwrite implementations
+	 * want to hold it while dereferencing the user data.
+	 */
+	first_data_page = data_ptr / PAGE_SIZE;
+	last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE;
+	num_pages = last_data_page - first_data_page + 1;
+
+	user_pages = drm_malloc_ab(num_pages, sizeof(struct page *));
+	if (user_pages == NULL)
+		return -ENOMEM;
+
+	mutex_unlock(&dev->struct_mutex);
+	down_read(&mm->mmap_sem);
+	pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr,
+				      num_pages, 0, 0, user_pages, NULL);
+	up_read(&mm->mmap_sem);
+	mutex_lock(&dev->struct_mutex);
+	if (pinned_pages < num_pages) {
+		ret = -EFAULT;
+		goto out_unpin_pages;
+	}
+
+	ret = i915_gem_object_set_to_gtt_domain(obj, true);
+	if (ret)
+		goto out_unpin_pages;
+
+	ret = i915_gem_object_put_fence(obj);
+	if (ret)
+		goto out_unpin_pages;
+
+	offset = obj->gtt_offset + args->offset;
+
+	while (remain > 0) {
+		/* Operation in this page
+		 *
+		 * gtt_page_base = page offset within aperture
+		 * gtt_page_offset = offset within page in aperture
+		 * data_page_index = page number in get_user_pages return
+		 * data_page_offset = offset with data_page_index page.
+		 * page_length = bytes to copy for this page
+		 */
+		gtt_page_base = offset & PAGE_MASK;
+		gtt_page_offset = offset_in_page(offset);
+		data_page_index = data_ptr / PAGE_SIZE - first_data_page;
+		data_page_offset = offset_in_page(data_ptr);
+
+		page_length = remain;
+		if ((gtt_page_offset + page_length) > PAGE_SIZE)
+			page_length = PAGE_SIZE - gtt_page_offset;
+		if ((data_page_offset + page_length) > PAGE_SIZE)
+			page_length = PAGE_SIZE - data_page_offset;
+
+		slow_kernel_write(dev_priv->mm.gtt_mapping,
+				  gtt_page_base, gtt_page_offset,
+				  user_pages[data_page_index],
+				  data_page_offset,
+				  page_length);
+
+		remain -= page_length;
+		offset += page_length;
+		data_ptr += page_length;
+	}
+
+out_unpin_pages:
+	for (i = 0; i < pinned_pages; i++)
+		page_cache_release(user_pages[i]);
+	drm_free_large(user_pages);
+
+	return ret;
+}
+
+/**
+ * This is the fast shmem pwrite path, which attempts to directly
+ * copy_from_user into the kmapped pages backing the object.
+ */
+static int
+i915_gem_shmem_pwrite_fast(struct drm_device *dev,
+			   struct drm_i915_gem_object *obj,
+			   struct drm_i915_gem_pwrite *args,
+			   struct drm_file *file)
+{
+	struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
+	ssize_t remain;
+	loff_t offset;
+	char __user *user_data;
+	int page_offset, page_length;
+
+	user_data = (char __user *) (uintptr_t) args->data_ptr;
+	remain = args->size;
+
+	offset = args->offset;
+	obj->dirty = 1;
+
+	while (remain > 0) {
+		struct page *page;
+		char *vaddr;
+		int ret;
+
+		/* Operation in this page
+		 *
+		 * page_offset = offset within page
+		 * page_length = bytes to copy for this page
+		 */
+		page_offset = offset_in_page(offset);
+		page_length = remain;
+		if ((page_offset + remain) > PAGE_SIZE)
+			page_length = PAGE_SIZE - page_offset;
+
+		page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
+		if (IS_ERR(page))
+			return PTR_ERR(page);
+
+		vaddr = kmap_atomic(page);
+		ret = __copy_from_user_inatomic(vaddr + page_offset,
+						user_data,
+						page_length);
+		kunmap_atomic(vaddr);
+
+		set_page_dirty(page);
+		mark_page_accessed(page);
+		page_cache_release(page);
+
+		/* If we get a fault while copying data, then (presumably) our
+		 * source page isn't available.  Return the error and we'll
+		 * retry in the slow path.
+		 */
+		if (ret)
+			return -EFAULT;
+
+		remain -= page_length;
+		user_data += page_length;
+		offset += page_length;
+	}
+
+	return 0;
+}
+
+/**
+ * This is the fallback shmem pwrite path, which uses get_user_pages to pin
+ * the memory and maps it using kmap_atomic for copying.
+ *
+ * This avoids taking mmap_sem for faulting on the user's address while the
+ * struct_mutex is held.
+ */
+static int
+i915_gem_shmem_pwrite_slow(struct drm_device *dev,
+			   struct drm_i915_gem_object *obj,
+			   struct drm_i915_gem_pwrite *args,
+			   struct drm_file *file)
+{
+	struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
+	ssize_t remain;
+	loff_t offset;
+	char __user *user_data;
+	int shmem_page_offset, page_length, ret;
+	int obj_do_bit17_swizzling, page_do_bit17_swizzling;
+
+	user_data = (char __user *) (uintptr_t) args->data_ptr;
+	remain = args->size;
+
+	obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
+
+	offset = args->offset;
+	obj->dirty = 1;
+
+	mutex_unlock(&dev->struct_mutex);
+
+	while (remain > 0) {
+		struct page *page;
+		char *vaddr;
+
+		/* Operation in this page
+		 *
+		 * shmem_page_offset = offset within page in shmem file
+		 * page_length = bytes to copy for this page
+		 */
+		shmem_page_offset = offset_in_page(offset);
+
+		page_length = remain;
+		if ((shmem_page_offset + page_length) > PAGE_SIZE)
+			page_length = PAGE_SIZE - shmem_page_offset;
+
+		page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
+		if (IS_ERR(page)) {
+			ret = PTR_ERR(page);
+			goto out;
+		}
+
+		page_do_bit17_swizzling = obj_do_bit17_swizzling &&
+			(page_to_phys(page) & (1 << 17)) != 0;
+
+		vaddr = kmap(page);
+		if (page_do_bit17_swizzling)
+			ret = __copy_from_user_swizzled(vaddr, shmem_page_offset,
+							user_data,
+							page_length);
+		else
+			ret = __copy_from_user(vaddr + shmem_page_offset,
+					       user_data,
+					       page_length);
+		kunmap(page);
+
+		set_page_dirty(page);
+		mark_page_accessed(page);
+		page_cache_release(page);
+
+		if (ret) {
+			ret = -EFAULT;
+			goto out;
+		}
+
+		remain -= page_length;
+		user_data += page_length;
+		offset += page_length;
+	}
+
+out:
+	mutex_lock(&dev->struct_mutex);
+	/* Fixup: Kill any reinstated backing storage pages */
+	if (obj->madv == __I915_MADV_PURGED)
+		i915_gem_object_truncate(obj);
+	/* and flush dirty cachelines in case the object isn't in the cpu write
+	 * domain anymore. */
+	if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
+		i915_gem_clflush_object(obj);
+		intel_gtt_chipset_flush();
+	}
+
+	return ret;
+}
+
+/**
+ * Writes data to the object referenced by handle.
+ *
+ * On error, the contents of the buffer that were to be modified are undefined.
+ */
+int
+i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
+		      struct drm_file *file)
+{
+	struct drm_i915_gem_pwrite *args = data;
+	struct drm_i915_gem_object *obj;
+	int ret;
+
+	if (args->size == 0)
+		return 0;
+
+	if (!access_ok(VERIFY_READ,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size))
+		return -EFAULT;
+
+	ret = fault_in_pages_readable((char __user *)(uintptr_t)args->data_ptr,
+				      args->size);
+	if (ret)
+		return -EFAULT;
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		return ret;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
+	if (&obj->base == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	/* Bounds check destination. */
+	if (args->offset > obj->base.size ||
+	    args->size > obj->base.size - args->offset) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	trace_i915_gem_object_pwrite(obj, args->offset, args->size);
+
+	/* We can only do the GTT pwrite on untiled buffers, as otherwise
+	 * it would end up going through the fenced access, and we'll get
+	 * different detiling behavior between reading and writing.
+	 * pread/pwrite currently are reading and writing from the CPU
+	 * perspective, requiring manual detiling by the client.
+	 */
+	if (obj->phys_obj) {
+		ret = i915_gem_phys_pwrite(dev, obj, args, file);
+		goto out;
+	}
+
+	if (obj->gtt_space &&
+	    obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
+		ret = i915_gem_object_pin(obj, 0, true);
+		if (ret)
+			goto out;
+
+		ret = i915_gem_object_set_to_gtt_domain(obj, true);
+		if (ret)
+			goto out_unpin;
+
+		ret = i915_gem_object_put_fence(obj);
+		if (ret)
+			goto out_unpin;
+
+		ret = i915_gem_gtt_pwrite_fast(dev, obj, args, file);
+		if (ret == -EFAULT)
+			ret = i915_gem_gtt_pwrite_slow(dev, obj, args, file);
+
+out_unpin:
+		i915_gem_object_unpin(obj);
+
+		if (ret != -EFAULT)
+			goto out;
+		/* Fall through to the shmfs paths because the gtt paths might
+		 * fail with non-page-backed user pointers (e.g. gtt mappings
+		 * when moving data between textures). */
+	}
+
+	ret = i915_gem_object_set_to_cpu_domain(obj, 1);
+	if (ret)
+		goto out;
+
+	ret = -EFAULT;
+	if (!i915_gem_object_needs_bit17_swizzle(obj))
+		ret = i915_gem_shmem_pwrite_fast(dev, obj, args, file);
+	if (ret == -EFAULT)
+		ret = i915_gem_shmem_pwrite_slow(dev, obj, args, file);
+
+out:
+	drm_gem_object_unreference(&obj->base);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+/**
+ * Called when user space prepares to use an object with the CPU, either
+ * through the mmap ioctl's mapping or a GTT mapping.
+ */
+int
+i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *file)
+{
+	struct drm_i915_gem_set_domain *args = data;
+	struct drm_i915_gem_object *obj;
+	uint32_t read_domains = args->read_domains;
+	uint32_t write_domain = args->write_domain;
+	int ret;
+
+	if (!(dev->driver->driver_features & DRIVER_GEM))
+		return -ENODEV;
+
+	/* Only handle setting domains to types used by the CPU. */
+	if (write_domain & I915_GEM_GPU_DOMAINS)
+		return -EINVAL;
+
+	if (read_domains & I915_GEM_GPU_DOMAINS)
+		return -EINVAL;
+
+	/* Having something in the write domain implies it's in the read
+	 * domain, and only that read domain.  Enforce that in the request.
+	 */
+	if (write_domain != 0 && read_domains != write_domain)
+		return -EINVAL;
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		return ret;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
+	if (&obj->base == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	if (read_domains & I915_GEM_DOMAIN_GTT) {
+		ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
+
+		/* Silently promote "you're not bound, there was nothing to do"
+		 * to success, since the client was just asking us to
+		 * make sure everything was done.
+		 */
+		if (ret == -EINVAL)
+			ret = 0;
+	} else {
+		ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0);
+	}
+
+	drm_gem_object_unreference(&obj->base);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+/**
+ * Called when user space has done writes to this buffer
+ */
+int
+i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
+			 struct drm_file *file)
+{
+	struct drm_i915_gem_sw_finish *args = data;
+	struct drm_i915_gem_object *obj;
+	int ret = 0;
+
+	if (!(dev->driver->driver_features & DRIVER_GEM))
+		return -ENODEV;
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		return ret;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
+	if (&obj->base == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	/* Pinned buffers may be scanout, so flush the cache */
+	if (obj->pin_count)
+		i915_gem_object_flush_cpu_write_domain(obj);
+
+	drm_gem_object_unreference(&obj->base);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+/**
+ * Maps the contents of an object, returning the address it is mapped
+ * into.
+ *
+ * While the mapping holds a reference on the contents of the object, it doesn't
+ * imply a ref on the object itself.
+ */
+int
+i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
+		    struct drm_file *file)
+{
+	struct drm_i915_gem_mmap *args = data;
+	struct drm_gem_object *obj;
+	unsigned long addr;
+
+	if (!(dev->driver->driver_features & DRIVER_GEM))
+		return -ENODEV;
+
+	obj = drm_gem_object_lookup(dev, file, args->handle);
+	if (obj == NULL)
+		return -ENOENT;
+
+	addr = vm_mmap(obj->filp, 0, args->size,
+		       PROT_READ | PROT_WRITE, MAP_SHARED,
+		       args->offset);
+	drm_gem_object_unreference_unlocked(obj);
+	if (IS_ERR((void *)addr))
+		return addr;
+
+	args->addr_ptr = (uint64_t) addr;
+
+	return 0;
+}
+
+/**
+ * i915_gem_fault - fault a page into the GTT
+ * vma: VMA in question
+ * vmf: fault info
+ *
+ * The fault handler is set up by drm_gem_mmap() when a object is GTT mapped
+ * from userspace.  The fault handler takes care of binding the object to
+ * the GTT (if needed), allocating and programming a fence register (again,
+ * only if needed based on whether the old reg is still valid or the object
+ * is tiled) and inserting a new PTE into the faulting process.
+ *
+ * Note that the faulting process may involve evicting existing objects
+ * from the GTT and/or fence registers to make room.  So performance may
+ * suffer if the GTT working set is large or there are few fence registers
+ * left.
+ */
+int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct drm_i915_gem_object *obj = to_intel_bo(vma->vm_private_data);
+	struct drm_device *dev = obj->base.dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	pgoff_t page_offset;
+	unsigned long pfn;
+	int ret = 0;
+	bool write = !!(vmf->flags & FAULT_FLAG_WRITE);
+
+	/* We don't use vmf->pgoff since that has the fake offset */
+	page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start) >>
+		PAGE_SHIFT;
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		goto out;
+
+	trace_i915_gem_object_fault(obj, page_offset, true, write);
+
+	/* Now bind it into the GTT if needed */
+	if (!obj->map_and_fenceable) {
+		ret = i915_gem_object_unbind(obj);
+		if (ret)
+			goto unlock;
+	}
+	if (!obj->gtt_space) {
+		ret = i915_gem_object_bind_to_gtt(obj, 0, true);
+		if (ret)
+			goto unlock;
+
+		ret = i915_gem_object_set_to_gtt_domain(obj, write);
+		if (ret)
+			goto unlock;
+	}
+
+	if (obj->tiling_mode == I915_TILING_NONE)
+		ret = i915_gem_object_put_fence(obj);
+	else
+		ret = i915_gem_object_get_fence(obj, NULL);
+	if (ret)
+		goto unlock;
+
+	if (i915_gem_object_is_inactive(obj))
+		list_move_tail(&obj->mm_list, &dev_priv->mm.inactive_list);
+
+	obj->fault_mappable = true;
+
+	pfn = ((dev->agp->base + obj->gtt_offset) >> PAGE_SHIFT) +
+		page_offset;
+
+	/* Finally, remap it using the new GTT offset */
+	ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+out:
+	switch (ret) {
+	case -EIO:
+	case -EAGAIN:
+		/* Give the error handler a chance to run and move the
+		 * objects off the GPU active list. Next time we service the
+		 * fault, we should be able to transition the page into the
+		 * GTT without touching the GPU (and so avoid further
+		 * EIO/EGAIN). If the GPU is wedged, then there is no issue
+		 * with coherency, just lost writes.
+		 */
+		set_need_resched();
+	case 0:
+	case -ERESTARTSYS:
+	case -EINTR:
+		return VM_FAULT_NOPAGE;
+	case -ENOMEM:
+		return VM_FAULT_OOM;
+	default:
+		return VM_FAULT_SIGBUS;
+	}
+}
+
+/**
+ * i915_gem_release_mmap - remove physical page mappings
+ * @obj: obj in question
+ *
+ * Preserve the reservation of the mmapping with the DRM core code, but
+ * relinquish ownership of the pages back to the system.
+ *
+ * It is vital that we remove the page mapping if we have mapped a tiled
+ * object through the GTT and then lose the fence register due to
+ * resource pressure. Similarly if the object has been moved out of the
+ * aperture, than pages mapped into userspace must be revoked. Removing the
+ * mapping will then trigger a page fault on the next user access, allowing
+ * fixup by i915_gem_fault().
+ */
+void
+i915_gem_release_mmap(struct drm_i915_gem_object *obj)
+{
+	if (!obj->fault_mappable)
+		return;
+
+	if (obj->base.dev->dev_mapping)
+		unmap_mapping_range(obj->base.dev->dev_mapping,
+				    (loff_t)obj->base.map_list.hash.key<<PAGE_SHIFT,
+				    obj->base.size, 1);
+
+	obj->fault_mappable = false;
+}
+
+static uint32_t
+i915_gem_get_gtt_size(struct drm_device *dev, uint32_t size, int tiling_mode)
+{
+	uint32_t gtt_size;
+
+	if (INTEL_INFO(dev)->gen >= 4 ||
+	    tiling_mode == I915_TILING_NONE)
+		return size;
+
+	/* Previous chips need a power-of-two fence region when tiling */
+	if (INTEL_INFO(dev)->gen == 3)
+		gtt_size = 1024*1024;
+	else
+		gtt_size = 512*1024;
+
+	while (gtt_size < size)
+		gtt_size <<= 1;
+
+	return gtt_size;
+}
+
+/**
+ * i915_gem_get_gtt_alignment - return required GTT alignment for an object
+ * @obj: object to check
+ *
+ * Return the required GTT alignment for an object, taking into account
+ * potential fence register mapping.
+ */
+static uint32_t
+i915_gem_get_gtt_alignment(struct drm_device *dev,
+			   uint32_t size,
+			   int tiling_mode)
+{
+	/*
+	 * Minimum alignment is 4k (GTT page size), but might be greater
+	 * if a fence register is needed for the object.
+	 */
+	if (INTEL_INFO(dev)->gen >= 4 ||
+	    tiling_mode == I915_TILING_NONE)
+		return 4096;
+
+	/*
+	 * Previous chips need to be aligned to the size of the smallest
+	 * fence register that can contain the object.
+	 */
+	return i915_gem_get_gtt_size(dev, size, tiling_mode);
+}
+
+/**
+ * i915_gem_get_unfenced_gtt_alignment - return required GTT alignment for an
+ *					 unfenced object
+ * @dev: the device
+ * @size: size of the object
+ * @tiling_mode: tiling mode of the object
+ *
+ * Return the required GTT alignment for an object, only taking into account
+ * unfenced tiled surface requirements.
+ */
+uint32_t
+i915_gem_get_unfenced_gtt_alignment(struct drm_device *dev,
+				    uint32_t size,
+				    int tiling_mode)
+{
+	/*
+	 * Minimum alignment is 4k (GTT page size) for sane hw.
+	 */
+	if (INTEL_INFO(dev)->gen >= 4 || IS_G33(dev) ||
+	    tiling_mode == I915_TILING_NONE)
+		return 4096;
+
+	/* Previous hardware however needs to be aligned to a power-of-two
+	 * tile height. The simplest method for determining this is to reuse
+	 * the power-of-tile object size.
+	 */
+	return i915_gem_get_gtt_size(dev, size, tiling_mode);
+}
+
+int
+i915_gem_mmap_gtt(struct drm_file *file,
+		  struct drm_device *dev,
+		  uint32_t handle,
+		  uint64_t *offset)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	int ret;
+
+	if (!(dev->driver->driver_features & DRIVER_GEM))
+		return -ENODEV;
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		return ret;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
+	if (&obj->base == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	if (obj->base.size > dev_priv->mm.gtt_mappable_end) {
+		ret = -E2BIG;
+		goto out;
+	}
+
+	if (obj->madv != I915_MADV_WILLNEED) {
+		DRM_ERROR("Attempting to mmap a purgeable buffer\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (!obj->base.map_list.map) {
+		ret = drm_gem_create_mmap_offset(&obj->base);
+		if (ret)
+			goto out;
+	}
+
+	*offset = (u64)obj->base.map_list.hash.key << PAGE_SHIFT;
+
+out:
+	drm_gem_object_unreference(&obj->base);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+/**
+ * i915_gem_mmap_gtt_ioctl - prepare an object for GTT mmap'ing
+ * @dev: DRM device
+ * @data: GTT mapping ioctl data
+ * @file: GEM object info
+ *
+ * Simply returns the fake offset to userspace so it can mmap it.
+ * The mmap call will end up in drm_gem_mmap(), which will set things
+ * up so we can get faults in the handler above.
+ *
+ * The fault handler will take care of binding the object into the GTT
+ * (since it may have been evicted to make room for something), allocating
+ * a fence register, and mapping the appropriate aperture address into
+ * userspace.
+ */
+int
+i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file)
+{
+	struct drm_i915_gem_mmap_gtt *args = data;
+
+	if (!(dev->driver->driver_features & DRIVER_GEM))
+		return -ENODEV;
+
+	return i915_gem_mmap_gtt(file, dev, args->handle, &args->offset);
+}
+
+
+static int
+i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj,
+			      gfp_t gfpmask)
+{
+	int page_count, i;
+	struct address_space *mapping;
+	struct inode *inode;
+	struct page *page;
+
+	/* Get the list of pages out of our struct file.  They'll be pinned
+	 * at this point until we release them.
+	 */
+	page_count = obj->base.size / PAGE_SIZE;
+	BUG_ON(obj->pages != NULL);
+	obj->pages = drm_malloc_ab(page_count, sizeof(struct page *));
+	if (obj->pages == NULL)
+		return -ENOMEM;
+
+	inode = obj->base.filp->f_path.dentry->d_inode;
+	mapping = inode->i_mapping;
+	gfpmask |= mapping_gfp_mask(mapping);
+
+	for (i = 0; i < page_count; i++) {
+		page = shmem_read_mapping_page_gfp(mapping, i, gfpmask);
+		if (IS_ERR(page))
+			goto err_pages;
+
+		obj->pages[i] = page;
+	}
+
+	if (i915_gem_object_needs_bit17_swizzle(obj))
+		i915_gem_object_do_bit_17_swizzle(obj);
+
+	return 0;
+
+err_pages:
+	while (i--)
+		page_cache_release(obj->pages[i]);
+
+	drm_free_large(obj->pages);
+	obj->pages = NULL;
+	return PTR_ERR(page);
+}
+
+static void
+i915_gem_object_put_pages_gtt(struct drm_i915_gem_object *obj)
+{
+	int page_count = obj->base.size / PAGE_SIZE;
+	int i;
+
+	BUG_ON(obj->madv == __I915_MADV_PURGED);
+
+	if (i915_gem_object_needs_bit17_swizzle(obj))
+		i915_gem_object_save_bit_17_swizzle(obj);
+
+	if (obj->madv == I915_MADV_DONTNEED)
+		obj->dirty = 0;
+
+	for (i = 0; i < page_count; i++) {
+		if (obj->dirty)
+			set_page_dirty(obj->pages[i]);
+
+		if (obj->madv == I915_MADV_WILLNEED)
+			mark_page_accessed(obj->pages[i]);
+
+		page_cache_release(obj->pages[i]);
+	}
+	obj->dirty = 0;
+
+	drm_free_large(obj->pages);
+	obj->pages = NULL;
+}
+
+void
+i915_gem_object_move_to_active(struct drm_i915_gem_object *obj,
+			       struct intel_ring_buffer *ring,
+			       u32 seqno)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	BUG_ON(ring == NULL);
+	obj->ring = ring;
+
+	/* Add a reference if we're newly entering the active list. */
+	if (!obj->active) {
+		drm_gem_object_reference(&obj->base);
+		obj->active = 1;
+	}
+
+	/* Move from whatever list we were on to the tail of execution. */
+	list_move_tail(&obj->mm_list, &dev_priv->mm.active_list);
+	list_move_tail(&obj->ring_list, &ring->active_list);
+
+	obj->last_rendering_seqno = seqno;
+
+	if (obj->fenced_gpu_access) {
+		obj->last_fenced_seqno = seqno;
+		obj->last_fenced_ring = ring;
+
+		/* Bump MRU to take account of the delayed flush */
+		if (obj->fence_reg != I915_FENCE_REG_NONE) {
+			struct drm_i915_fence_reg *reg;
+
+			reg = &dev_priv->fence_regs[obj->fence_reg];
+			list_move_tail(&reg->lru_list,
+				       &dev_priv->mm.fence_list);
+		}
+	}
+}
+
+static void
+i915_gem_object_move_off_active(struct drm_i915_gem_object *obj)
+{
+	list_del_init(&obj->ring_list);
+	obj->last_rendering_seqno = 0;
+	obj->last_fenced_seqno = 0;
+}
+
+static void
+i915_gem_object_move_to_flushing(struct drm_i915_gem_object *obj)
+{
+	struct drm_device *dev = obj->base.dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	BUG_ON(!obj->active);
+	list_move_tail(&obj->mm_list, &dev_priv->mm.flushing_list);
+
+	i915_gem_object_move_off_active(obj);
+}
+
+static void
+i915_gem_object_move_to_inactive(struct drm_i915_gem_object *obj)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (obj->pin_count != 0)
+		list_move_tail(&obj->mm_list, &dev_priv->mm.pinned_list);
+	else
+		list_move_tail(&obj->mm_list, &dev_priv->mm.inactive_list);
+
+	BUG_ON(!list_empty(&obj->gpu_write_list));
+	BUG_ON(!obj->active);
+	obj->ring = NULL;
+	obj->last_fenced_ring = NULL;
+
+	i915_gem_object_move_off_active(obj);
+	obj->fenced_gpu_access = false;
+
+	obj->active = 0;
+	obj->pending_gpu_write = false;
+	drm_gem_object_unreference(&obj->base);
+
+	WARN_ON(i915_verify_lists(dev));
+}
+
+/* Immediately discard the backing storage */
+static void
+i915_gem_object_truncate(struct drm_i915_gem_object *obj)
+{
+	struct inode *inode;
+
+	/* Our goal here is to return as much of the memory as
+	 * is possible back to the system as we are called from OOM.
+	 * To do this we must instruct the shmfs to drop all of its
+	 * backing pages, *now*.
+	 */
+	inode = obj->base.filp->f_path.dentry->d_inode;
+	shmem_truncate_range(inode, 0, (loff_t)-1);
+
+	obj->madv = __I915_MADV_PURGED;
+}
+
+static inline int
+i915_gem_object_is_purgeable(struct drm_i915_gem_object *obj)
+{
+	return obj->madv == I915_MADV_DONTNEED;
+}
+
+static void
+i915_gem_process_flushing_list(struct intel_ring_buffer *ring,
+			       uint32_t flush_domains)
+{
+	struct drm_i915_gem_object *obj, *next;
+
+	list_for_each_entry_safe(obj, next,
+				 &ring->gpu_write_list,
+				 gpu_write_list) {
+		if (obj->base.write_domain & flush_domains) {
+			uint32_t old_write_domain = obj->base.write_domain;
+
+			obj->base.write_domain = 0;
+			list_del_init(&obj->gpu_write_list);
+			i915_gem_object_move_to_active(obj, ring,
+						       i915_gem_next_request_seqno(ring));
+
+			trace_i915_gem_object_change_domain(obj,
+							    obj->base.read_domains,
+							    old_write_domain);
+		}
+	}
+}
+
+static u32
+i915_gem_get_seqno(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 seqno = dev_priv->next_seqno;
+
+	/* reserve 0 for non-seqno */
+	if (++dev_priv->next_seqno == 0)
+		dev_priv->next_seqno = 1;
+
+	return seqno;
+}
+
+u32
+i915_gem_next_request_seqno(struct intel_ring_buffer *ring)
+{
+	if (ring->outstanding_lazy_request == 0)
+		ring->outstanding_lazy_request = i915_gem_get_seqno(ring->dev);
+
+	return ring->outstanding_lazy_request;
+}
+
+int
+i915_add_request(struct intel_ring_buffer *ring,
+		 struct drm_file *file,
+		 struct drm_i915_gem_request *request)
+{
+	drm_i915_private_t *dev_priv = ring->dev->dev_private;
+	uint32_t seqno;
+	u32 request_ring_position;
+	int was_empty;
+	int ret;
+
+	BUG_ON(request == NULL);
+	seqno = i915_gem_next_request_seqno(ring);
+
+	/* Record the position of the start of the request so that
+	 * should we detect the updated seqno part-way through the
+	 * GPU processing the request, we never over-estimate the
+	 * position of the head.
+	 */
+	request_ring_position = intel_ring_get_tail(ring);
+
+	ret = ring->add_request(ring, &seqno);
+	if (ret)
+	    return ret;
+
+	trace_i915_gem_request_add(ring, seqno);
+
+	request->seqno = seqno;
+	request->ring = ring;
+	request->tail = request_ring_position;
+	request->emitted_jiffies = jiffies;
+	was_empty = list_empty(&ring->request_list);
+	list_add_tail(&request->list, &ring->request_list);
+
+	if (file) {
+		struct drm_i915_file_private *file_priv = file->driver_priv;
+
+		spin_lock(&file_priv->mm.lock);
+		request->file_priv = file_priv;
+		list_add_tail(&request->client_list,
+			      &file_priv->mm.request_list);
+		spin_unlock(&file_priv->mm.lock);
+	}
+
+	ring->outstanding_lazy_request = 0;
+
+	if (!dev_priv->mm.suspended) {
+		if (i915_enable_hangcheck) {
+			mod_timer(&dev_priv->hangcheck_timer,
+				  jiffies +
+				  msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
+		}
+		if (was_empty)
+			queue_delayed_work(dev_priv->wq,
+					   &dev_priv->mm.retire_work, HZ);
+	}
+	return 0;
+}
+
+static inline void
+i915_gem_request_remove_from_client(struct drm_i915_gem_request *request)
+{
+	struct drm_i915_file_private *file_priv = request->file_priv;
+
+	if (!file_priv)
+		return;
+
+	spin_lock(&file_priv->mm.lock);
+	if (request->file_priv) {
+		list_del(&request->client_list);
+		request->file_priv = NULL;
+	}
+	spin_unlock(&file_priv->mm.lock);
+}
+
+static void i915_gem_reset_ring_lists(struct drm_i915_private *dev_priv,
+				      struct intel_ring_buffer *ring)
+{
+	while (!list_empty(&ring->request_list)) {
+		struct drm_i915_gem_request *request;
+
+		request = list_first_entry(&ring->request_list,
+					   struct drm_i915_gem_request,
+					   list);
+
+		list_del(&request->list);
+		i915_gem_request_remove_from_client(request);
+		kfree(request);
+	}
+
+	while (!list_empty(&ring->active_list)) {
+		struct drm_i915_gem_object *obj;
+
+		obj = list_first_entry(&ring->active_list,
+				       struct drm_i915_gem_object,
+				       ring_list);
+
+		obj->base.write_domain = 0;
+		list_del_init(&obj->gpu_write_list);
+		i915_gem_object_move_to_inactive(obj);
+	}
+}
+
+static void i915_gem_reset_fences(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+
+	for (i = 0; i < dev_priv->num_fence_regs; i++) {
+		struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i];
+		struct drm_i915_gem_object *obj = reg->obj;
+
+		if (!obj)
+			continue;
+
+		if (obj->tiling_mode)
+			i915_gem_release_mmap(obj);
+
+		reg->obj->fence_reg = I915_FENCE_REG_NONE;
+		reg->obj->fenced_gpu_access = false;
+		reg->obj->last_fenced_seqno = 0;
+		reg->obj->last_fenced_ring = NULL;
+		i915_gem_clear_fence_reg(dev, reg);
+	}
+}
+
+void i915_gem_reset(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	int i;
+
+	for (i = 0; i < I915_NUM_RINGS; i++)
+		i915_gem_reset_ring_lists(dev_priv, &dev_priv->ring[i]);
+
+	/* Remove anything from the flushing lists. The GPU cache is likely
+	 * to be lost on reset along with the data, so simply move the
+	 * lost bo to the inactive list.
+	 */
+	while (!list_empty(&dev_priv->mm.flushing_list)) {
+		obj = list_first_entry(&dev_priv->mm.flushing_list,
+				      struct drm_i915_gem_object,
+				      mm_list);
+
+		obj->base.write_domain = 0;
+		list_del_init(&obj->gpu_write_list);
+		i915_gem_object_move_to_inactive(obj);
+	}
+
+	/* Move everything out of the GPU domains to ensure we do any
+	 * necessary invalidation upon reuse.
+	 */
+	list_for_each_entry(obj,
+			    &dev_priv->mm.inactive_list,
+			    mm_list)
+	{
+		obj->base.read_domains &= ~I915_GEM_GPU_DOMAINS;
+	}
+
+	/* The fence registers are invalidated so clear them out */
+	i915_gem_reset_fences(dev);
+}
+
+/**
+ * This function clears the request list as sequence numbers are passed.
+ */
+void
+i915_gem_retire_requests_ring(struct intel_ring_buffer *ring)
+{
+	uint32_t seqno;
+	int i;
+
+	if (list_empty(&ring->request_list))
+		return;
+
+	WARN_ON(i915_verify_lists(ring->dev));
+
+	seqno = ring->get_seqno(ring);
+
+	for (i = 0; i < ARRAY_SIZE(ring->sync_seqno); i++)
+		if (seqno >= ring->sync_seqno[i])
+			ring->sync_seqno[i] = 0;
+
+	while (!list_empty(&ring->request_list)) {
+		struct drm_i915_gem_request *request;
+
+		request = list_first_entry(&ring->request_list,
+					   struct drm_i915_gem_request,
+					   list);
+
+		if (!i915_seqno_passed(seqno, request->seqno))
+			break;
+
+		trace_i915_gem_request_retire(ring, request->seqno);
+		/* We know the GPU must have read the request to have
+		 * sent us the seqno + interrupt, so use the position
+		 * of tail of the request to update the last known position
+		 * of the GPU head.
+		 */
+		ring->last_retired_head = request->tail;
+
+		list_del(&request->list);
+		i915_gem_request_remove_from_client(request);
+		kfree(request);
+	}
+
+	/* Move any buffers on the active list that are no longer referenced
+	 * by the ringbuffer to the flushing/inactive lists as appropriate.
+	 */
+	while (!list_empty(&ring->active_list)) {
+		struct drm_i915_gem_object *obj;
+
+		obj = list_first_entry(&ring->active_list,
+				      struct drm_i915_gem_object,
+				      ring_list);
+
+		if (!i915_seqno_passed(seqno, obj->last_rendering_seqno))
+			break;
+
+		if (obj->base.write_domain != 0)
+			i915_gem_object_move_to_flushing(obj);
+		else
+			i915_gem_object_move_to_inactive(obj);
+	}
+
+	if (unlikely(ring->trace_irq_seqno &&
+		     i915_seqno_passed(seqno, ring->trace_irq_seqno))) {
+		ring->irq_put(ring);
+		ring->trace_irq_seqno = 0;
+	}
+
+	WARN_ON(i915_verify_lists(ring->dev));
+}
+
+void
+i915_gem_retire_requests(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int i;
+
+	if (!list_empty(&dev_priv->mm.deferred_free_list)) {
+	    struct drm_i915_gem_object *obj, *next;
+
+	    /* We must be careful that during unbind() we do not
+	     * accidentally infinitely recurse into retire requests.
+	     * Currently:
+	     *   retire -> free -> unbind -> wait -> retire_ring
+	     */
+	    list_for_each_entry_safe(obj, next,
+				     &dev_priv->mm.deferred_free_list,
+				     mm_list)
+		    i915_gem_free_object_tail(obj);
+	}
+
+	for (i = 0; i < I915_NUM_RINGS; i++)
+		i915_gem_retire_requests_ring(&dev_priv->ring[i]);
+}
+
+static void
+i915_gem_retire_work_handler(struct work_struct *work)
+{
+	drm_i915_private_t *dev_priv;
+	struct drm_device *dev;
+	bool idle;
+	int i;
+
+	dev_priv = container_of(work, drm_i915_private_t,
+				mm.retire_work.work);
+	dev = dev_priv->dev;
+
+	/* Come back later if the device is busy... */
+	if (!mutex_trylock(&dev->struct_mutex)) {
+		queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
+		return;
+	}
+
+	i915_gem_retire_requests(dev);
+
+	/* Send a periodic flush down the ring so we don't hold onto GEM
+	 * objects indefinitely.
+	 */
+	idle = true;
+	for (i = 0; i < I915_NUM_RINGS; i++) {
+		struct intel_ring_buffer *ring = &dev_priv->ring[i];
+
+		if (!list_empty(&ring->gpu_write_list)) {
+			struct drm_i915_gem_request *request;
+			int ret;
+
+			ret = i915_gem_flush_ring(ring,
+						  0, I915_GEM_GPU_DOMAINS);
+			request = kzalloc(sizeof(*request), GFP_KERNEL);
+			if (ret || request == NULL ||
+			    i915_add_request(ring, NULL, request))
+			    kfree(request);
+		}
+
+		idle &= list_empty(&ring->request_list);
+	}
+
+	if (!dev_priv->mm.suspended && !idle)
+		queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
+
+	mutex_unlock(&dev->struct_mutex);
+}
+
+/**
+ * Waits for a sequence number to be signaled, and cleans up the
+ * request and object lists appropriately for that event.
+ */
+int
+i915_wait_request(struct intel_ring_buffer *ring,
+		  uint32_t seqno,
+		  bool do_retire)
+{
+	drm_i915_private_t *dev_priv = ring->dev->dev_private;
+	u32 ier;
+	int ret = 0;
+
+	BUG_ON(seqno == 0);
+
+	if (atomic_read(&dev_priv->mm.wedged)) {
+		struct completion *x = &dev_priv->error_completion;
+		bool recovery_complete;
+		unsigned long flags;
+
+		/* Give the error handler a chance to run. */
+		spin_lock_irqsave(&x->wait.lock, flags);
+		recovery_complete = x->done > 0;
+		spin_unlock_irqrestore(&x->wait.lock, flags);
+
+		return recovery_complete ? -EIO : -EAGAIN;
+	}
+
+	if (seqno == ring->outstanding_lazy_request) {
+		struct drm_i915_gem_request *request;
+
+		request = kzalloc(sizeof(*request), GFP_KERNEL);
+		if (request == NULL)
+			return -ENOMEM;
+
+		ret = i915_add_request(ring, NULL, request);
+		if (ret) {
+			kfree(request);
+			return ret;
+		}
+
+		seqno = request->seqno;
+	}
+
+	if (!i915_seqno_passed(ring->get_seqno(ring), seqno)) {
+		if (HAS_PCH_SPLIT(ring->dev))
+			ier = I915_READ(DEIER) | I915_READ(GTIER);
+		else
+			ier = I915_READ(IER);
+		if (!ier) {
+			DRM_ERROR("something (likely vbetool) disabled "
+				  "interrupts, re-enabling\n");
+			ring->dev->driver->irq_preinstall(ring->dev);
+			ring->dev->driver->irq_postinstall(ring->dev);
+		}
+
+		trace_i915_gem_request_wait_begin(ring, seqno);
+
+		ring->waiting_seqno = seqno;
+		if (ring->irq_get(ring)) {
+			if (dev_priv->mm.interruptible)
+				ret = wait_event_interruptible(ring->irq_queue,
+							       i915_seqno_passed(ring->get_seqno(ring), seqno)
+							       || atomic_read(&dev_priv->mm.wedged));
+			else
+				wait_event(ring->irq_queue,
+					   i915_seqno_passed(ring->get_seqno(ring), seqno)
+					   || atomic_read(&dev_priv->mm.wedged));
+
+			ring->irq_put(ring);
+		} else if (wait_for_atomic(i915_seqno_passed(ring->get_seqno(ring),
+							     seqno) ||
+					   atomic_read(&dev_priv->mm.wedged), 3000))
+			ret = -EBUSY;
+		ring->waiting_seqno = 0;
+
+		trace_i915_gem_request_wait_end(ring, seqno);
+	}
+	if (atomic_read(&dev_priv->mm.wedged))
+		ret = -EAGAIN;
+
+	/* Directly dispatch request retiring.  While we have the work queue
+	 * to handle this, the waiter on a request often wants an associated
+	 * buffer to have made it to the inactive list, and we would need
+	 * a separate wait queue to handle that.
+	 */
+	if (ret == 0 && do_retire)
+		i915_gem_retire_requests_ring(ring);
+
+	return ret;
+}
+
+/**
+ * Ensures that all rendering to the object has completed and the object is
+ * safe to unbind from the GTT or access from the CPU.
+ */
+int
+i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj)
+{
+	int ret;
+
+	/* This function only exists to support waiting for existing rendering,
+	 * not for emitting required flushes.
+	 */
+	BUG_ON((obj->base.write_domain & I915_GEM_GPU_DOMAINS) != 0);
+
+	/* If there is rendering queued on the buffer being evicted, wait for
+	 * it.
+	 */
+	if (obj->active) {
+		ret = i915_wait_request(obj->ring, obj->last_rendering_seqno,
+					true);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void i915_gem_object_finish_gtt(struct drm_i915_gem_object *obj)
+{
+	u32 old_write_domain, old_read_domains;
+
+	/* Act a barrier for all accesses through the GTT */
+	mb();
+
+	/* Force a pagefault for domain tracking on next user access */
+	i915_gem_release_mmap(obj);
+
+	if ((obj->base.read_domains & I915_GEM_DOMAIN_GTT) == 0)
+		return;
+
+	old_read_domains = obj->base.read_domains;
+	old_write_domain = obj->base.write_domain;
+
+	obj->base.read_domains &= ~I915_GEM_DOMAIN_GTT;
+	obj->base.write_domain &= ~I915_GEM_DOMAIN_GTT;
+
+	trace_i915_gem_object_change_domain(obj,
+					    old_read_domains,
+					    old_write_domain);
+}
+
+/**
+ * Unbinds an object from the GTT aperture.
+ */
+int
+i915_gem_object_unbind(struct drm_i915_gem_object *obj)
+{
+	drm_i915_private_t *dev_priv = obj->base.dev->dev_private;
+	int ret = 0;
+
+	if (obj->gtt_space == NULL)
+		return 0;
+
+	if (obj->pin_count != 0) {
+		DRM_ERROR("Attempting to unbind pinned buffer\n");
+		return -EINVAL;
+	}
+
+	ret = i915_gem_object_finish_gpu(obj);
+	if (ret == -ERESTARTSYS)
+		return ret;
+	/* Continue on if we fail due to EIO, the GPU is hung so we
+	 * should be safe and we need to cleanup or else we might
+	 * cause memory corruption through use-after-free.
+	 */
+
+	i915_gem_object_finish_gtt(obj);
+
+	/* Move the object to the CPU domain to ensure that
+	 * any possible CPU writes while it's not in the GTT
+	 * are flushed when we go to remap it.
+	 */
+	if (ret == 0)
+		ret = i915_gem_object_set_to_cpu_domain(obj, 1);
+	if (ret == -ERESTARTSYS)
+		return ret;
+	if (ret) {
+		/* In the event of a disaster, abandon all caches and
+		 * hope for the best.
+		 */
+		i915_gem_clflush_object(obj);
+		obj->base.read_domains = obj->base.write_domain = I915_GEM_DOMAIN_CPU;
+	}
+
+	/* release the fence reg _after_ flushing */
+	ret = i915_gem_object_put_fence(obj);
+	if (ret == -ERESTARTSYS)
+		return ret;
+
+	trace_i915_gem_object_unbind(obj);
+
+	i915_gem_gtt_unbind_object(obj);
+	if (obj->has_aliasing_ppgtt_mapping) {
+		i915_ppgtt_unbind_object(dev_priv->mm.aliasing_ppgtt, obj);
+		obj->has_aliasing_ppgtt_mapping = 0;
+	}
+
+	i915_gem_object_put_pages_gtt(obj);
+
+	list_del_init(&obj->gtt_list);
+	list_del_init(&obj->mm_list);
+	/* Avoid an unnecessary call to unbind on rebind. */
+	obj->map_and_fenceable = true;
+
+	drm_mm_put_block(obj->gtt_space);
+	obj->gtt_space = NULL;
+	obj->gtt_offset = 0;
+
+	if (i915_gem_object_is_purgeable(obj))
+		i915_gem_object_truncate(obj);
+
+	return ret;
+}
+
+int
+i915_gem_flush_ring(struct intel_ring_buffer *ring,
+		    uint32_t invalidate_domains,
+		    uint32_t flush_domains)
+{
+	int ret;
+
+	if (((invalidate_domains | flush_domains) & I915_GEM_GPU_DOMAINS) == 0)
+		return 0;
+
+	trace_i915_gem_ring_flush(ring, invalidate_domains, flush_domains);
+
+	ret = ring->flush(ring, invalidate_domains, flush_domains);
+	if (ret)
+		return ret;
+
+	if (flush_domains & I915_GEM_GPU_DOMAINS)
+		i915_gem_process_flushing_list(ring, flush_domains);
+
+	return 0;
+}
+
+static int i915_ring_idle(struct intel_ring_buffer *ring, bool do_retire)
+{
+	int ret;
+
+	if (list_empty(&ring->gpu_write_list) && list_empty(&ring->active_list))
+		return 0;
+
+	if (!list_empty(&ring->gpu_write_list)) {
+		ret = i915_gem_flush_ring(ring,
+				    I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
+		if (ret)
+			return ret;
+	}
+
+	return i915_wait_request(ring, i915_gem_next_request_seqno(ring),
+				 do_retire);
+}
+
+int i915_gpu_idle(struct drm_device *dev, bool do_retire)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret, i;
+
+	/* Flush everything onto the inactive list. */
+	for (i = 0; i < I915_NUM_RINGS; i++) {
+		ret = i915_ring_idle(&dev_priv->ring[i], do_retire);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int sandybridge_write_fence_reg(struct drm_i915_gem_object *obj,
+				       struct intel_ring_buffer *pipelined)
+{
+	struct drm_device *dev = obj->base.dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 size = obj->gtt_space->size;
+	int regnum = obj->fence_reg;
+	uint64_t val;
+
+	val = (uint64_t)((obj->gtt_offset + size - 4096) &
+			 0xfffff000) << 32;
+	val |= obj->gtt_offset & 0xfffff000;
+	val |= (uint64_t)((obj->stride / 128) - 1) <<
+		SANDYBRIDGE_FENCE_PITCH_SHIFT;
+
+	if (obj->tiling_mode == I915_TILING_Y)
+		val |= 1 << I965_FENCE_TILING_Y_SHIFT;
+	val |= I965_FENCE_REG_VALID;
+
+	if (pipelined) {
+		int ret = intel_ring_begin(pipelined, 6);
+		if (ret)
+			return ret;
+
+		intel_ring_emit(pipelined, MI_NOOP);
+		intel_ring_emit(pipelined, MI_LOAD_REGISTER_IMM(2));
+		intel_ring_emit(pipelined, FENCE_REG_SANDYBRIDGE_0 + regnum*8);
+		intel_ring_emit(pipelined, (u32)val);
+		intel_ring_emit(pipelined, FENCE_REG_SANDYBRIDGE_0 + regnum*8 + 4);
+		intel_ring_emit(pipelined, (u32)(val >> 32));
+		intel_ring_advance(pipelined);
+	} else
+		I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + regnum * 8, val);
+
+	return 0;
+}
+
+static int i965_write_fence_reg(struct drm_i915_gem_object *obj,
+				struct intel_ring_buffer *pipelined)
+{
+	struct drm_device *dev = obj->base.dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 size = obj->gtt_space->size;
+	int regnum = obj->fence_reg;
+	uint64_t val;
+
+	val = (uint64_t)((obj->gtt_offset + size - 4096) &
+		    0xfffff000) << 32;
+	val |= obj->gtt_offset & 0xfffff000;
+	val |= ((obj->stride / 128) - 1) << I965_FENCE_PITCH_SHIFT;
+	if (obj->tiling_mode == I915_TILING_Y)
+		val |= 1 << I965_FENCE_TILING_Y_SHIFT;
+	val |= I965_FENCE_REG_VALID;
+
+	if (pipelined) {
+		int ret = intel_ring_begin(pipelined, 6);
+		if (ret)
+			return ret;
+
+		intel_ring_emit(pipelined, MI_NOOP);
+		intel_ring_emit(pipelined, MI_LOAD_REGISTER_IMM(2));
+		intel_ring_emit(pipelined, FENCE_REG_965_0 + regnum*8);
+		intel_ring_emit(pipelined, (u32)val);
+		intel_ring_emit(pipelined, FENCE_REG_965_0 + regnum*8 + 4);
+		intel_ring_emit(pipelined, (u32)(val >> 32));
+		intel_ring_advance(pipelined);
+	} else
+		I915_WRITE64(FENCE_REG_965_0 + regnum * 8, val);
+
+	return 0;
+}
+
+static int i915_write_fence_reg(struct drm_i915_gem_object *obj,
+				struct intel_ring_buffer *pipelined)
+{
+	struct drm_device *dev = obj->base.dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 size = obj->gtt_space->size;
+	u32 fence_reg, val, pitch_val;
+	int tile_width;
+
+	if (WARN((obj->gtt_offset & ~I915_FENCE_START_MASK) ||
+		 (size & -size) != size ||
+		 (obj->gtt_offset & (size - 1)),
+		 "object 0x%08x [fenceable? %d] not 1M or pot-size (0x%08x) aligned\n",
+		 obj->gtt_offset, obj->map_and_fenceable, size))
+		return -EINVAL;
+
+	if (obj->tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))
+		tile_width = 128;
+	else
+		tile_width = 512;
+
+	/* Note: pitch better be a power of two tile widths */
+	pitch_val = obj->stride / tile_width;
+	pitch_val = ffs(pitch_val) - 1;
+
+	val = obj->gtt_offset;
+	if (obj->tiling_mode == I915_TILING_Y)
+		val |= 1 << I830_FENCE_TILING_Y_SHIFT;
+	val |= I915_FENCE_SIZE_BITS(size);
+	val |= pitch_val << I830_FENCE_PITCH_SHIFT;
+	val |= I830_FENCE_REG_VALID;
+
+	fence_reg = obj->fence_reg;
+	if (fence_reg < 8)
+		fence_reg = FENCE_REG_830_0 + fence_reg * 4;
+	else
+		fence_reg = FENCE_REG_945_8 + (fence_reg - 8) * 4;
+
+	if (pipelined) {
+		int ret = intel_ring_begin(pipelined, 4);
+		if (ret)
+			return ret;
+
+		intel_ring_emit(pipelined, MI_NOOP);
+		intel_ring_emit(pipelined, MI_LOAD_REGISTER_IMM(1));
+		intel_ring_emit(pipelined, fence_reg);
+		intel_ring_emit(pipelined, val);
+		intel_ring_advance(pipelined);
+	} else
+		I915_WRITE(fence_reg, val);
+
+	return 0;
+}
+
+static int i830_write_fence_reg(struct drm_i915_gem_object *obj,
+				struct intel_ring_buffer *pipelined)
+{
+	struct drm_device *dev = obj->base.dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 size = obj->gtt_space->size;
+	int regnum = obj->fence_reg;
+	uint32_t val;
+	uint32_t pitch_val;
+
+	if (WARN((obj->gtt_offset & ~I830_FENCE_START_MASK) ||
+		 (size & -size) != size ||
+		 (obj->gtt_offset & (size - 1)),
+		 "object 0x%08x not 512K or pot-size 0x%08x aligned\n",
+		 obj->gtt_offset, size))
+		return -EINVAL;
+
+	pitch_val = obj->stride / 128;
+	pitch_val = ffs(pitch_val) - 1;
+
+	val = obj->gtt_offset;
+	if (obj->tiling_mode == I915_TILING_Y)
+		val |= 1 << I830_FENCE_TILING_Y_SHIFT;
+	val |= I830_FENCE_SIZE_BITS(size);
+	val |= pitch_val << I830_FENCE_PITCH_SHIFT;
+	val |= I830_FENCE_REG_VALID;
+
+	if (pipelined) {
+		int ret = intel_ring_begin(pipelined, 4);
+		if (ret)
+			return ret;
+
+		intel_ring_emit(pipelined, MI_NOOP);
+		intel_ring_emit(pipelined, MI_LOAD_REGISTER_IMM(1));
+		intel_ring_emit(pipelined, FENCE_REG_830_0 + regnum*4);
+		intel_ring_emit(pipelined, val);
+		intel_ring_advance(pipelined);
+	} else
+		I915_WRITE(FENCE_REG_830_0 + regnum * 4, val);
+
+	return 0;
+}
+
+static bool ring_passed_seqno(struct intel_ring_buffer *ring, u32 seqno)
+{
+	return i915_seqno_passed(ring->get_seqno(ring), seqno);
+}
+
+static int
+i915_gem_object_flush_fence(struct drm_i915_gem_object *obj,
+			    struct intel_ring_buffer *pipelined)
+{
+	int ret;
+
+	if (obj->fenced_gpu_access) {
+		if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
+			ret = i915_gem_flush_ring(obj->last_fenced_ring,
+						  0, obj->base.write_domain);
+			if (ret)
+				return ret;
+		}
+
+		obj->fenced_gpu_access = false;
+	}
+
+	if (obj->last_fenced_seqno && pipelined != obj->last_fenced_ring) {
+		if (!ring_passed_seqno(obj->last_fenced_ring,
+				       obj->last_fenced_seqno)) {
+			ret = i915_wait_request(obj->last_fenced_ring,
+						obj->last_fenced_seqno,
+						true);
+			if (ret)
+				return ret;
+		}
+
+		obj->last_fenced_seqno = 0;
+		obj->last_fenced_ring = NULL;
+	}
+
+	/* Ensure that all CPU reads are completed before installing a fence
+	 * and all writes before removing the fence.
+	 */
+	if (obj->base.read_domains & I915_GEM_DOMAIN_GTT)
+		mb();
+
+	return 0;
+}
+
+int
+i915_gem_object_put_fence(struct drm_i915_gem_object *obj)
+{
+	int ret;
+
+	if (obj->tiling_mode)
+		i915_gem_release_mmap(obj);
+
+	ret = i915_gem_object_flush_fence(obj, NULL);
+	if (ret)
+		return ret;
+
+	if (obj->fence_reg != I915_FENCE_REG_NONE) {
+		struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
+
+		WARN_ON(dev_priv->fence_regs[obj->fence_reg].pin_count);
+		i915_gem_clear_fence_reg(obj->base.dev,
+					 &dev_priv->fence_regs[obj->fence_reg]);
+
+		obj->fence_reg = I915_FENCE_REG_NONE;
+	}
+
+	return 0;
+}
+
+static struct drm_i915_fence_reg *
+i915_find_fence_reg(struct drm_device *dev,
+		    struct intel_ring_buffer *pipelined)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_fence_reg *reg, *first, *avail;
+	int i;
+
+	/* First try to find a free reg */
+	avail = NULL;
+	for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
+		reg = &dev_priv->fence_regs[i];
+		if (!reg->obj)
+			return reg;
+
+		if (!reg->pin_count)
+			avail = reg;
+	}
+
+	if (avail == NULL)
+		return NULL;
+
+	/* None available, try to steal one or wait for a user to finish */
+	avail = first = NULL;
+	list_for_each_entry(reg, &dev_priv->mm.fence_list, lru_list) {
+		if (reg->pin_count)
+			continue;
+
+		if (first == NULL)
+			first = reg;
+
+		if (!pipelined ||
+		    !reg->obj->last_fenced_ring ||
+		    reg->obj->last_fenced_ring == pipelined) {
+			avail = reg;
+			break;
+		}
+	}
+
+	if (avail == NULL)
+		avail = first;
+
+	return avail;
+}
+
+/**
+ * i915_gem_object_get_fence - set up a fence reg for an object
+ * @obj: object to map through a fence reg
+ * @pipelined: ring on which to queue the change, or NULL for CPU access
+ * @interruptible: must we wait uninterruptibly for the register to retire?
+ *
+ * When mapping objects through the GTT, userspace wants to be able to write
+ * to them without having to worry about swizzling if the object is tiled.
+ *
+ * This function walks the fence regs looking for a free one for @obj,
+ * stealing one if it can't find any.
+ *
+ * It then sets up the reg based on the object's properties: address, pitch
+ * and tiling format.
+ */
+int
+i915_gem_object_get_fence(struct drm_i915_gem_object *obj,
+			  struct intel_ring_buffer *pipelined)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_fence_reg *reg;
+	int ret;
+
+	/* XXX disable pipelining. There are bugs. Shocking. */
+	pipelined = NULL;
+
+	/* Just update our place in the LRU if our fence is getting reused. */
+	if (obj->fence_reg != I915_FENCE_REG_NONE) {
+		reg = &dev_priv->fence_regs[obj->fence_reg];
+		list_move_tail(&reg->lru_list, &dev_priv->mm.fence_list);
+
+		if (obj->tiling_changed) {
+			ret = i915_gem_object_flush_fence(obj, pipelined);
+			if (ret)
+				return ret;
+
+			if (!obj->fenced_gpu_access && !obj->last_fenced_seqno)
+				pipelined = NULL;
+
+			if (pipelined) {
+				reg->setup_seqno =
+					i915_gem_next_request_seqno(pipelined);
+				obj->last_fenced_seqno = reg->setup_seqno;
+				obj->last_fenced_ring = pipelined;
+			}
+
+			goto update;
+		}
+
+		if (!pipelined) {
+			if (reg->setup_seqno) {
+				if (!ring_passed_seqno(obj->last_fenced_ring,
+						       reg->setup_seqno)) {
+					ret = i915_wait_request(obj->last_fenced_ring,
+								reg->setup_seqno,
+								true);
+					if (ret)
+						return ret;
+				}
+
+				reg->setup_seqno = 0;
+			}
+		} else if (obj->last_fenced_ring &&
+			   obj->last_fenced_ring != pipelined) {
+			ret = i915_gem_object_flush_fence(obj, pipelined);
+			if (ret)
+				return ret;
+		}
+
+		return 0;
+	}
+
+	reg = i915_find_fence_reg(dev, pipelined);
+	if (reg == NULL)
+		return -EDEADLK;
+
+	ret = i915_gem_object_flush_fence(obj, pipelined);
+	if (ret)
+		return ret;
+
+	if (reg->obj) {
+		struct drm_i915_gem_object *old = reg->obj;
+
+		drm_gem_object_reference(&old->base);
+
+		if (old->tiling_mode)
+			i915_gem_release_mmap(old);
+
+		ret = i915_gem_object_flush_fence(old, pipelined);
+		if (ret) {
+			drm_gem_object_unreference(&old->base);
+			return ret;
+		}
+
+		if (old->last_fenced_seqno == 0 && obj->last_fenced_seqno == 0)
+			pipelined = NULL;
+
+		old->fence_reg = I915_FENCE_REG_NONE;
+		old->last_fenced_ring = pipelined;
+		old->last_fenced_seqno =
+			pipelined ? i915_gem_next_request_seqno(pipelined) : 0;
+
+		drm_gem_object_unreference(&old->base);
+	} else if (obj->last_fenced_seqno == 0)
+		pipelined = NULL;
+
+	reg->obj = obj;
+	list_move_tail(&reg->lru_list, &dev_priv->mm.fence_list);
+	obj->fence_reg = reg - dev_priv->fence_regs;
+	obj->last_fenced_ring = pipelined;
+
+	reg->setup_seqno =
+		pipelined ? i915_gem_next_request_seqno(pipelined) : 0;
+	obj->last_fenced_seqno = reg->setup_seqno;
+
+update:
+	obj->tiling_changed = false;
+	switch (INTEL_INFO(dev)->gen) {
+	case 7:
+	case 6:
+		ret = sandybridge_write_fence_reg(obj, pipelined);
+		break;
+	case 5:
+	case 4:
+		ret = i965_write_fence_reg(obj, pipelined);
+		break;
+	case 3:
+		ret = i915_write_fence_reg(obj, pipelined);
+		break;
+	case 2:
+		ret = i830_write_fence_reg(obj, pipelined);
+		break;
+	}
+
+	return ret;
+}
+
+/**
+ * i915_gem_clear_fence_reg - clear out fence register info
+ * @obj: object to clear
+ *
+ * Zeroes out the fence register itself and clears out the associated
+ * data structures in dev_priv and obj.
+ */
+static void
+i915_gem_clear_fence_reg(struct drm_device *dev,
+			 struct drm_i915_fence_reg *reg)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	uint32_t fence_reg = reg - dev_priv->fence_regs;
+
+	switch (INTEL_INFO(dev)->gen) {
+	case 7:
+	case 6:
+		I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + fence_reg*8, 0);
+		break;
+	case 5:
+	case 4:
+		I915_WRITE64(FENCE_REG_965_0 + fence_reg*8, 0);
+		break;
+	case 3:
+		if (fence_reg >= 8)
+			fence_reg = FENCE_REG_945_8 + (fence_reg - 8) * 4;
+		else
+	case 2:
+			fence_reg = FENCE_REG_830_0 + fence_reg * 4;
+
+		I915_WRITE(fence_reg, 0);
+		break;
+	}
+
+	list_del_init(&reg->lru_list);
+	reg->obj = NULL;
+	reg->setup_seqno = 0;
+	reg->pin_count = 0;
+}
+
+/**
+ * Finds free space in the GTT aperture and binds the object there.
+ */
+static int
+i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
+			    unsigned alignment,
+			    bool map_and_fenceable)
+{
+	struct drm_device *dev = obj->base.dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_mm_node *free_space;
+	gfp_t gfpmask = __GFP_NORETRY | __GFP_NOWARN;
+	u32 size, fence_size, fence_alignment, unfenced_alignment;
+	bool mappable, fenceable;
+	int ret;
+
+	if (obj->madv != I915_MADV_WILLNEED) {
+		DRM_ERROR("Attempting to bind a purgeable object\n");
+		return -EINVAL;
+	}
+
+	fence_size = i915_gem_get_gtt_size(dev,
+					   obj->base.size,
+					   obj->tiling_mode);
+	fence_alignment = i915_gem_get_gtt_alignment(dev,
+						     obj->base.size,
+						     obj->tiling_mode);
+	unfenced_alignment =
+		i915_gem_get_unfenced_gtt_alignment(dev,
+						    obj->base.size,
+						    obj->tiling_mode);
+
+	if (alignment == 0)
+		alignment = map_and_fenceable ? fence_alignment :
+						unfenced_alignment;
+	if (map_and_fenceable && alignment & (fence_alignment - 1)) {
+		DRM_ERROR("Invalid object alignment requested %u\n", alignment);
+		return -EINVAL;
+	}
+
+	size = map_and_fenceable ? fence_size : obj->base.size;
+
+	/* If the object is bigger than the entire aperture, reject it early
+	 * before evicting everything in a vain attempt to find space.
+	 */
+	if (obj->base.size >
+	    (map_and_fenceable ? dev_priv->mm.gtt_mappable_end : dev_priv->mm.gtt_total)) {
+		DRM_ERROR("Attempting to bind an object larger than the aperture\n");
+		return -E2BIG;
+	}
+
+ search_free:
+	if (map_and_fenceable)
+		free_space =
+			drm_mm_search_free_in_range(&dev_priv->mm.gtt_space,
+						    size, alignment, 0,
+						    dev_priv->mm.gtt_mappable_end,
+						    0);
+	else
+		free_space = drm_mm_search_free(&dev_priv->mm.gtt_space,
+						size, alignment, 0);
+
+	if (free_space != NULL) {
+		if (map_and_fenceable)
+			obj->gtt_space =
+				drm_mm_get_block_range_generic(free_space,
+							       size, alignment, 0,
+							       dev_priv->mm.gtt_mappable_end,
+							       0);
+		else
+			obj->gtt_space =
+				drm_mm_get_block(free_space, size, alignment);
+	}
+	if (obj->gtt_space == NULL) {
+		/* If the gtt is empty and we're still having trouble
+		 * fitting our object in, we're out of memory.
+		 */
+		ret = i915_gem_evict_something(dev, size, alignment,
+					       map_and_fenceable);
+		if (ret)
+			return ret;
+
+		goto search_free;
+	}
+
+	ret = i915_gem_object_get_pages_gtt(obj, gfpmask);
+	if (ret) {
+		drm_mm_put_block(obj->gtt_space);
+		obj->gtt_space = NULL;
+
+		if (ret == -ENOMEM) {
+			/* first try to reclaim some memory by clearing the GTT */
+			ret = i915_gem_evict_everything(dev, false);
+			if (ret) {
+				/* now try to shrink everyone else */
+				if (gfpmask) {
+					gfpmask = 0;
+					goto search_free;
+				}
+
+				return -ENOMEM;
+			}
+
+			goto search_free;
+		}
+
+		return ret;
+	}
+
+	ret = i915_gem_gtt_bind_object(obj);
+	if (ret) {
+		i915_gem_object_put_pages_gtt(obj);
+		drm_mm_put_block(obj->gtt_space);
+		obj->gtt_space = NULL;
+
+		if (i915_gem_evict_everything(dev, false))
+			return ret;
+
+		goto search_free;
+	}
+
+	list_add_tail(&obj->gtt_list, &dev_priv->mm.gtt_list);
+	list_add_tail(&obj->mm_list, &dev_priv->mm.inactive_list);
+
+	/* Assert that the object is not currently in any GPU domain. As it
+	 * wasn't in the GTT, there shouldn't be any way it could have been in
+	 * a GPU cache
+	 */
+	BUG_ON(obj->base.read_domains & I915_GEM_GPU_DOMAINS);
+	BUG_ON(obj->base.write_domain & I915_GEM_GPU_DOMAINS);
+
+	obj->gtt_offset = obj->gtt_space->start;
+
+	fenceable =
+		obj->gtt_space->size == fence_size &&
+		(obj->gtt_space->start & (fence_alignment - 1)) == 0;
+
+	mappable =
+		obj->gtt_offset + obj->base.size <= dev_priv->mm.gtt_mappable_end;
+
+	obj->map_and_fenceable = mappable && fenceable;
+
+	trace_i915_gem_object_bind(obj, map_and_fenceable);
+	return 0;
+}
+
+void
+i915_gem_clflush_object(struct drm_i915_gem_object *obj)
+{
+	/* If we don't have a page list set up, then we're not pinned
+	 * to GPU, and we can ignore the cache flush because it'll happen
+	 * again at bind time.
+	 */
+	if (obj->pages == NULL)
+		return;
+
+	/* If the GPU is snooping the contents of the CPU cache,
+	 * we do not need to manually clear the CPU cache lines.  However,
+	 * the caches are only snooped when the render cache is
+	 * flushed/invalidated.  As we always have to emit invalidations
+	 * and flushes when moving into and out of the RENDER domain, correct
+	 * snooping behaviour occurs naturally as the result of our domain
+	 * tracking.
+	 */
+	if (obj->cache_level != I915_CACHE_NONE)
+		return;
+
+	trace_i915_gem_object_clflush(obj);
+
+	drm_clflush_pages(obj->pages, obj->base.size / PAGE_SIZE);
+}
+
+/** Flushes any GPU write domain for the object if it's dirty. */
+static int
+i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj)
+{
+	if ((obj->base.write_domain & I915_GEM_GPU_DOMAINS) == 0)
+		return 0;
+
+	/* Queue the GPU write cache flushing we need. */
+	return i915_gem_flush_ring(obj->ring, 0, obj->base.write_domain);
+}
+
+/** Flushes the GTT write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj)
+{
+	uint32_t old_write_domain;
+
+	if (obj->base.write_domain != I915_GEM_DOMAIN_GTT)
+		return;
+
+	/* No actual flushing is required for the GTT write domain.  Writes
+	 * to it immediately go to main memory as far as we know, so there's
+	 * no chipset flush.  It also doesn't land in render cache.
+	 *
+	 * However, we do have to enforce the order so that all writes through
+	 * the GTT land before any writes to the device, such as updates to
+	 * the GATT itself.
+	 */
+	wmb();
+
+	old_write_domain = obj->base.write_domain;
+	obj->base.write_domain = 0;
+
+	trace_i915_gem_object_change_domain(obj,
+					    obj->base.read_domains,
+					    old_write_domain);
+}
+
+/** Flushes the CPU write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj)
+{
+	uint32_t old_write_domain;
+
+	if (obj->base.write_domain != I915_GEM_DOMAIN_CPU)
+		return;
+
+	i915_gem_clflush_object(obj);
+	intel_gtt_chipset_flush();
+	old_write_domain = obj->base.write_domain;
+	obj->base.write_domain = 0;
+
+	trace_i915_gem_object_change_domain(obj,
+					    obj->base.read_domains,
+					    old_write_domain);
+}
+
+/**
+ * Moves a single object to the GTT read, and possibly write domain.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+int
+i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj, bool write)
+{
+	uint32_t old_write_domain, old_read_domains;
+	int ret;
+
+	/* Not valid to be called on unbound objects. */
+	if (obj->gtt_space == NULL)
+		return -EINVAL;
+
+	if (obj->base.write_domain == I915_GEM_DOMAIN_GTT)
+		return 0;
+
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	if (ret)
+		return ret;
+
+	if (obj->pending_gpu_write || write) {
+		ret = i915_gem_object_wait_rendering(obj);
+		if (ret)
+			return ret;
+	}
+
+	i915_gem_object_flush_cpu_write_domain(obj);
+
+	old_write_domain = obj->base.write_domain;
+	old_read_domains = obj->base.read_domains;
+
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
+	 */
+	BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+	obj->base.read_domains |= I915_GEM_DOMAIN_GTT;
+	if (write) {
+		obj->base.read_domains = I915_GEM_DOMAIN_GTT;
+		obj->base.write_domain = I915_GEM_DOMAIN_GTT;
+		obj->dirty = 1;
+	}
+
+	trace_i915_gem_object_change_domain(obj,
+					    old_read_domains,
+					    old_write_domain);
+
+	return 0;
+}
+
+int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj,
+				    enum i915_cache_level cache_level)
+{
+	struct drm_device *dev = obj->base.dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	if (obj->cache_level == cache_level)
+		return 0;
+
+	if (obj->pin_count) {
+		DRM_DEBUG("can not change the cache level of pinned objects\n");
+		return -EBUSY;
+	}
+
+	if (obj->gtt_space) {
+		ret = i915_gem_object_finish_gpu(obj);
+		if (ret)
+			return ret;
+
+		i915_gem_object_finish_gtt(obj);
+
+		/* Before SandyBridge, you could not use tiling or fence
+		 * registers with snooped memory, so relinquish any fences
+		 * currently pointing to our region in the aperture.
+		 */
+		if (INTEL_INFO(obj->base.dev)->gen < 6) {
+			ret = i915_gem_object_put_fence(obj);
+			if (ret)
+				return ret;
+		}
+
+		i915_gem_gtt_rebind_object(obj, cache_level);
+		if (obj->has_aliasing_ppgtt_mapping)
+			i915_ppgtt_bind_object(dev_priv->mm.aliasing_ppgtt,
+					       obj, cache_level);
+	}
+
+	if (cache_level == I915_CACHE_NONE) {
+		u32 old_read_domains, old_write_domain;
+
+		/* If we're coming from LLC cached, then we haven't
+		 * actually been tracking whether the data is in the
+		 * CPU cache or not, since we only allow one bit set
+		 * in obj->write_domain and have been skipping the clflushes.
+		 * Just set it to the CPU cache for now.
+		 */
+		WARN_ON(obj->base.write_domain & ~I915_GEM_DOMAIN_CPU);
+		WARN_ON(obj->base.read_domains & ~I915_GEM_DOMAIN_CPU);
+
+		old_read_domains = obj->base.read_domains;
+		old_write_domain = obj->base.write_domain;
+
+		obj->base.read_domains = I915_GEM_DOMAIN_CPU;
+		obj->base.write_domain = I915_GEM_DOMAIN_CPU;
+
+		trace_i915_gem_object_change_domain(obj,
+						    old_read_domains,
+						    old_write_domain);
+	}
+
+	obj->cache_level = cache_level;
+	return 0;
+}
+
+/*
+ * Prepare buffer for display plane (scanout, cursors, etc).
+ * Can be called from an uninterruptible phase (modesetting) and allows
+ * any flushes to be pipelined (for pageflips).
+ *
+ * For the display plane, we want to be in the GTT but out of any write
+ * domains. So in many ways this looks like set_to_gtt_domain() apart from the
+ * ability to pipeline the waits, pinning and any additional subtleties
+ * that may differentiate the display plane from ordinary buffers.
+ */
+int
+i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
+				     u32 alignment,
+				     struct intel_ring_buffer *pipelined)
+{
+	u32 old_read_domains, old_write_domain;
+	int ret;
+
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	if (ret)
+		return ret;
+
+	if (pipelined != obj->ring) {
+		ret = i915_gem_object_wait_rendering(obj);
+		if (ret == -ERESTARTSYS)
+			return ret;
+	}
+
+	/* The display engine is not coherent with the LLC cache on gen6.  As
+	 * a result, we make sure that the pinning that is about to occur is
+	 * done with uncached PTEs. This is lowest common denominator for all
+	 * chipsets.
+	 *
+	 * However for gen6+, we could do better by using the GFDT bit instead
+	 * of uncaching, which would allow us to flush all the LLC-cached data
+	 * with that bit in the PTE to main memory with just one PIPE_CONTROL.
+	 */
+	ret = i915_gem_object_set_cache_level(obj, I915_CACHE_NONE);
+	if (ret)
+		return ret;
+
+	/* As the user may map the buffer once pinned in the display plane
+	 * (e.g. libkms for the bootup splash), we have to ensure that we
+	 * always use map_and_fenceable for all scanout buffers.
+	 */
+	ret = i915_gem_object_pin(obj, alignment, true);
+	if (ret)
+		return ret;
+
+	i915_gem_object_flush_cpu_write_domain(obj);
+
+	old_write_domain = obj->base.write_domain;
+	old_read_domains = obj->base.read_domains;
+
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
+	 */
+	BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+	obj->base.read_domains |= I915_GEM_DOMAIN_GTT;
+
+	trace_i915_gem_object_change_domain(obj,
+					    old_read_domains,
+					    old_write_domain);
+
+	return 0;
+}
+
+int
+i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj)
+{
+	int ret;
+
+	if ((obj->base.read_domains & I915_GEM_GPU_DOMAINS) == 0)
+		return 0;
+
+	if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
+		ret = i915_gem_flush_ring(obj->ring, 0, obj->base.write_domain);
+		if (ret)
+			return ret;
+	}
+
+	ret = i915_gem_object_wait_rendering(obj);
+	if (ret)
+		return ret;
+
+	/* Ensure that we invalidate the GPU's caches and TLBs. */
+	obj->base.read_domains &= ~I915_GEM_GPU_DOMAINS;
+	return 0;
+}
+
+/**
+ * Moves a single object to the CPU read, and possibly write domain.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write)
+{
+	uint32_t old_write_domain, old_read_domains;
+	int ret;
+
+	if (obj->base.write_domain == I915_GEM_DOMAIN_CPU)
+		return 0;
+
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	if (ret)
+		return ret;
+
+	ret = i915_gem_object_wait_rendering(obj);
+	if (ret)
+		return ret;
+
+	i915_gem_object_flush_gtt_write_domain(obj);
+
+	/* If we have a partially-valid cache of the object in the CPU,
+	 * finish invalidating it and free the per-page flags.
+	 */
+	i915_gem_object_set_to_full_cpu_read_domain(obj);
+
+	old_write_domain = obj->base.write_domain;
+	old_read_domains = obj->base.read_domains;
+
+	/* Flush the CPU cache if it's still invalid. */
+	if ((obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0) {
+		i915_gem_clflush_object(obj);
+
+		obj->base.read_domains |= I915_GEM_DOMAIN_CPU;
+	}
+
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
+	 */
+	BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
+
+	/* If we're writing through the CPU, then the GPU read domains will
+	 * need to be invalidated at next use.
+	 */
+	if (write) {
+		obj->base.read_domains = I915_GEM_DOMAIN_CPU;
+		obj->base.write_domain = I915_GEM_DOMAIN_CPU;
+	}
+
+	trace_i915_gem_object_change_domain(obj,
+					    old_read_domains,
+					    old_write_domain);
+
+	return 0;
+}
+
+/**
+ * Moves the object from a partially CPU read to a full one.
+ *
+ * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(),
+ * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU).
+ */
+static void
+i915_gem_object_set_to_full_cpu_read_domain(struct drm_i915_gem_object *obj)
+{
+	if (!obj->page_cpu_valid)
+		return;
+
+	/* If we're partially in the CPU read domain, finish moving it in.
+	 */
+	if (obj->base.read_domains & I915_GEM_DOMAIN_CPU) {
+		int i;
+
+		for (i = 0; i <= (obj->base.size - 1) / PAGE_SIZE; i++) {
+			if (obj->page_cpu_valid[i])
+				continue;
+			drm_clflush_pages(obj->pages + i, 1);
+		}
+	}
+
+	/* Free the page_cpu_valid mappings which are now stale, whether
+	 * or not we've got I915_GEM_DOMAIN_CPU.
+	 */
+	kfree(obj->page_cpu_valid);
+	obj->page_cpu_valid = NULL;
+}
+
+/**
+ * Set the CPU read domain on a range of the object.
+ *
+ * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's
+ * not entirely valid.  The page_cpu_valid member of the object flags which
+ * pages have been flushed, and will be respected by
+ * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping
+ * of the whole object.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_cpu_read_domain_range(struct drm_i915_gem_object *obj,
+					  uint64_t offset, uint64_t size)
+{
+	uint32_t old_read_domains;
+	int i, ret;
+
+	if (offset == 0 && size == obj->base.size)
+		return i915_gem_object_set_to_cpu_domain(obj, 0);
+
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	if (ret)
+		return ret;
+
+	ret = i915_gem_object_wait_rendering(obj);
+	if (ret)
+		return ret;
+
+	i915_gem_object_flush_gtt_write_domain(obj);
+
+	/* If we're already fully in the CPU read domain, we're done. */
+	if (obj->page_cpu_valid == NULL &&
+	    (obj->base.read_domains & I915_GEM_DOMAIN_CPU) != 0)
+		return 0;
+
+	/* Otherwise, create/clear the per-page CPU read domain flag if we're
+	 * newly adding I915_GEM_DOMAIN_CPU
+	 */
+	if (obj->page_cpu_valid == NULL) {
+		obj->page_cpu_valid = kzalloc(obj->base.size / PAGE_SIZE,
+					      GFP_KERNEL);
+		if (obj->page_cpu_valid == NULL)
+			return -ENOMEM;
+	} else if ((obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0)
+		memset(obj->page_cpu_valid, 0, obj->base.size / PAGE_SIZE);
+
+	/* Flush the cache on any pages that are still invalid from the CPU's
+	 * perspective.
+	 */
+	for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE;
+	     i++) {
+		if (obj->page_cpu_valid[i])
+			continue;
+
+		drm_clflush_pages(obj->pages + i, 1);
+
+		obj->page_cpu_valid[i] = 1;
+	}
+
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
+	 */
+	BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
+
+	old_read_domains = obj->base.read_domains;
+	obj->base.read_domains |= I915_GEM_DOMAIN_CPU;
+
+	trace_i915_gem_object_change_domain(obj,
+					    old_read_domains,
+					    obj->base.write_domain);
+
+	return 0;
+}
+
+/* Throttle our rendering by waiting until the ring has completed our requests
+ * emitted over 20 msec ago.
+ *
+ * Note that if we were to use the current jiffies each time around the loop,
+ * we wouldn't escape the function with any frames outstanding if the time to
+ * render a frame was over 20ms.
+ *
+ * This should get us reasonable parallelism between CPU and GPU but also
+ * relatively low latency when blocking on a particular request to finish.
+ */
+static int
+i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_file_private *file_priv = file->driver_priv;
+	unsigned long recent_enough = jiffies - msecs_to_jiffies(20);
+	struct drm_i915_gem_request *request;
+	struct intel_ring_buffer *ring = NULL;
+	u32 seqno = 0;
+	int ret;
+
+	if (atomic_read(&dev_priv->mm.wedged))
+		return -EIO;
+
+	spin_lock(&file_priv->mm.lock);
+	list_for_each_entry(request, &file_priv->mm.request_list, client_list) {
+		if (time_after_eq(request->emitted_jiffies, recent_enough))
+			break;
+
+		ring = request->ring;
+		seqno = request->seqno;
+	}
+	spin_unlock(&file_priv->mm.lock);
+
+	if (seqno == 0)
+		return 0;
+
+	ret = 0;
+	if (!i915_seqno_passed(ring->get_seqno(ring), seqno)) {
+		/* And wait for the seqno passing without holding any locks and
+		 * causing extra latency for others. This is safe as the irq
+		 * generation is designed to be run atomically and so is
+		 * lockless.
+		 */
+		if (ring->irq_get(ring)) {
+			ret = wait_event_interruptible(ring->irq_queue,
+						       i915_seqno_passed(ring->get_seqno(ring), seqno)
+						       || atomic_read(&dev_priv->mm.wedged));
+			ring->irq_put(ring);
+
+			if (ret == 0 && atomic_read(&dev_priv->mm.wedged))
+				ret = -EIO;
+		} else if (wait_for_atomic(i915_seqno_passed(ring->get_seqno(ring),
+							     seqno) ||
+				    atomic_read(&dev_priv->mm.wedged), 3000)) {
+			ret = -EBUSY;
+		}
+	}
+
+	if (ret == 0)
+		queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, 0);
+
+	return ret;
+}
+
+int
+i915_gem_object_pin(struct drm_i915_gem_object *obj,
+		    uint32_t alignment,
+		    bool map_and_fenceable)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	BUG_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT);
+	WARN_ON(i915_verify_lists(dev));
+
+	if (obj->gtt_space != NULL) {
+		if ((alignment && obj->gtt_offset & (alignment - 1)) ||
+		    (map_and_fenceable && !obj->map_and_fenceable)) {
+			WARN(obj->pin_count,
+			     "bo is already pinned with incorrect alignment:"
+			     " offset=%x, req.alignment=%x, req.map_and_fenceable=%d,"
+			     " obj->map_and_fenceable=%d\n",
+			     obj->gtt_offset, alignment,
+			     map_and_fenceable,
+			     obj->map_and_fenceable);
+			ret = i915_gem_object_unbind(obj);
+			if (ret)
+				return ret;
+		}
+	}
+
+	if (obj->gtt_space == NULL) {
+		ret = i915_gem_object_bind_to_gtt(obj, alignment,
+						  map_and_fenceable);
+		if (ret)
+			return ret;
+	}
+
+	if (obj->pin_count++ == 0) {
+		if (!obj->active)
+			list_move_tail(&obj->mm_list,
+				       &dev_priv->mm.pinned_list);
+	}
+	obj->pin_mappable |= map_and_fenceable;
+
+	WARN_ON(i915_verify_lists(dev));
+	return 0;
+}
+
+void
+i915_gem_object_unpin(struct drm_i915_gem_object *obj)
+{
+	struct drm_device *dev = obj->base.dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	WARN_ON(i915_verify_lists(dev));
+	BUG_ON(obj->pin_count == 0);
+	BUG_ON(obj->gtt_space == NULL);
+
+	if (--obj->pin_count == 0) {
+		if (!obj->active)
+			list_move_tail(&obj->mm_list,
+				       &dev_priv->mm.inactive_list);
+		obj->pin_mappable = false;
+	}
+	WARN_ON(i915_verify_lists(dev));
+}
+
+int
+i915_gem_pin_ioctl(struct drm_device *dev, void *data,
+		   struct drm_file *file)
+{
+	struct drm_i915_gem_pin *args = data;
+	struct drm_i915_gem_object *obj;
+	int ret;
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		return ret;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
+	if (&obj->base == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	if (obj->madv != I915_MADV_WILLNEED) {
+		DRM_ERROR("Attempting to pin a purgeable buffer\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (obj->pin_filp != NULL && obj->pin_filp != file) {
+		DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n",
+			  args->handle);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	obj->user_pin_count++;
+	obj->pin_filp = file;
+	if (obj->user_pin_count == 1) {
+		ret = i915_gem_object_pin(obj, args->alignment, true);
+		if (ret)
+			goto out;
+	}
+
+	/* XXX - flush the CPU caches for pinned objects
+	 * as the X server doesn't manage domains yet
+	 */
+	i915_gem_object_flush_cpu_write_domain(obj);
+	args->offset = obj->gtt_offset;
+out:
+	drm_gem_object_unreference(&obj->base);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+int
+i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
+		     struct drm_file *file)
+{
+	struct drm_i915_gem_pin *args = data;
+	struct drm_i915_gem_object *obj;
+	int ret;
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		return ret;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
+	if (&obj->base == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	if (obj->pin_filp != file) {
+		DRM_ERROR("Not pinned by caller in i915_gem_pin_ioctl(): %d\n",
+			  args->handle);
+		ret = -EINVAL;
+		goto out;
+	}
+	obj->user_pin_count--;
+	if (obj->user_pin_count == 0) {
+		obj->pin_filp = NULL;
+		i915_gem_object_unpin(obj);
+	}
+
+out:
+	drm_gem_object_unreference(&obj->base);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+int
+i915_gem_busy_ioctl(struct drm_device *dev, void *data,
+		    struct drm_file *file)
+{
+	struct drm_i915_gem_busy *args = data;
+	struct drm_i915_gem_object *obj;
+	int ret;
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		return ret;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
+	if (&obj->base == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	/* Count all active objects as busy, even if they are currently not used
+	 * by the gpu. Users of this interface expect objects to eventually
+	 * become non-busy without any further actions, therefore emit any
+	 * necessary flushes here.
+	 */
+	args->busy = obj->active;
+	if (args->busy) {
+		/* Unconditionally flush objects, even when the gpu still uses this
+		 * object. Userspace calling this function indicates that it wants to
+		 * use this buffer rather sooner than later, so issuing the required
+		 * flush earlier is beneficial.
+		 */
+		if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
+			ret = i915_gem_flush_ring(obj->ring,
+						  0, obj->base.write_domain);
+		} else if (obj->ring->outstanding_lazy_request ==
+			   obj->last_rendering_seqno) {
+			struct drm_i915_gem_request *request;
+
+			/* This ring is not being cleared by active usage,
+			 * so emit a request to do so.
+			 */
+			request = kzalloc(sizeof(*request), GFP_KERNEL);
+			if (request) {
+				ret = i915_add_request(obj->ring, NULL, request);
+				if (ret)
+					kfree(request);
+			} else
+				ret = -ENOMEM;
+		}
+
+		/* Update the active list for the hardware's current position.
+		 * Otherwise this only updates on a delayed timer or when irqs
+		 * are actually unmasked, and our working set ends up being
+		 * larger than required.
+		 */
+		i915_gem_retire_requests_ring(obj->ring);
+
+		args->busy = obj->active;
+	}
+
+	drm_gem_object_unreference(&obj->base);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+int
+i915_gem_throttle_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv)
+{
+	return i915_gem_ring_throttle(dev, file_priv);
+}
+
+int
+i915_gem_madvise_ioctl(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv)
+{
+	struct drm_i915_gem_madvise *args = data;
+	struct drm_i915_gem_object *obj;
+	int ret;
+
+	switch (args->madv) {
+	case I915_MADV_DONTNEED:
+	case I915_MADV_WILLNEED:
+	    break;
+	default:
+	    return -EINVAL;
+	}
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		return ret;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file_priv, args->handle));
+	if (&obj->base == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	if (obj->pin_count) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (obj->madv != __I915_MADV_PURGED)
+		obj->madv = args->madv;
+
+	/* if the object is no longer bound, discard its backing storage */
+	if (i915_gem_object_is_purgeable(obj) &&
+	    obj->gtt_space == NULL)
+		i915_gem_object_truncate(obj);
+
+	args->retained = obj->madv != __I915_MADV_PURGED;
+
+out:
+	drm_gem_object_unreference(&obj->base);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
+						  size_t size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	struct address_space *mapping;
+
+	obj = kzalloc(sizeof(*obj), GFP_KERNEL);
+	if (obj == NULL)
+		return NULL;
+
+	if (drm_gem_object_init(dev, &obj->base, size) != 0) {
+		kfree(obj);
+		return NULL;
+	}
+
+	mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
+	mapping_set_gfp_mask(mapping, GFP_HIGHUSER | __GFP_RECLAIMABLE);
+
+	i915_gem_info_add_obj(dev_priv, size);
+
+	obj->base.write_domain = I915_GEM_DOMAIN_CPU;
+	obj->base.read_domains = I915_GEM_DOMAIN_CPU;
+
+	if (HAS_LLC(dev)) {
+		/* On some devices, we can have the GPU use the LLC (the CPU
+		 * cache) for about a 10% performance improvement
+		 * compared to uncached.  Graphics requests other than
+		 * display scanout are coherent with the CPU in
+		 * accessing this cache.  This means in this mode we
+		 * don't need to clflush on the CPU side, and on the
+		 * GPU side we only need to flush internal caches to
+		 * get data visible to the CPU.
+		 *
+		 * However, we maintain the display planes as UC, and so
+		 * need to rebind when first used as such.
+		 */
+		obj->cache_level = I915_CACHE_LLC;
+	} else
+		obj->cache_level = I915_CACHE_NONE;
+
+	obj->base.driver_private = NULL;
+	obj->fence_reg = I915_FENCE_REG_NONE;
+	INIT_LIST_HEAD(&obj->mm_list);
+	INIT_LIST_HEAD(&obj->gtt_list);
+	INIT_LIST_HEAD(&obj->ring_list);
+	INIT_LIST_HEAD(&obj->exec_list);
+	INIT_LIST_HEAD(&obj->gpu_write_list);
+	obj->madv = I915_MADV_WILLNEED;
+	/* Avoid an unnecessary call to unbind on the first bind. */
+	obj->map_and_fenceable = true;
+
+	return obj;
+}
+
+int i915_gem_init_object(struct drm_gem_object *obj)
+{
+	BUG();
+
+	return 0;
+}
+
+static void i915_gem_free_object_tail(struct drm_i915_gem_object *obj)
+{
+	struct drm_device *dev = obj->base.dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = i915_gem_object_unbind(obj);
+	if (ret == -ERESTARTSYS) {
+		list_move(&obj->mm_list,
+			  &dev_priv->mm.deferred_free_list);
+		return;
+	}
+
+	trace_i915_gem_object_destroy(obj);
+
+	if (obj->base.map_list.map)
+		drm_gem_free_mmap_offset(&obj->base);
+
+	drm_gem_object_release(&obj->base);
+	i915_gem_info_remove_obj(dev_priv, obj->base.size);
+
+	kfree(obj->page_cpu_valid);
+	kfree(obj->bit_17);
+	kfree(obj);
+}
+
+void i915_gem_free_object(struct drm_gem_object *gem_obj)
+{
+	struct drm_i915_gem_object *obj = to_intel_bo(gem_obj);
+	struct drm_device *dev = obj->base.dev;
+
+	while (obj->pin_count > 0)
+		i915_gem_object_unpin(obj);
+
+	if (obj->phys_obj)
+		i915_gem_detach_phys_object(dev, obj);
+
+	i915_gem_free_object_tail(obj);
+}
+
+int
+i915_gem_idle(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	mutex_lock(&dev->struct_mutex);
+
+	if (dev_priv->mm.suspended) {
+		mutex_unlock(&dev->struct_mutex);
+		return 0;
+	}
+
+	ret = i915_gpu_idle(dev, true);
+	if (ret) {
+		mutex_unlock(&dev->struct_mutex);
+		return ret;
+	}
+
+	/* Under UMS, be paranoid and evict. */
+	if (!drm_core_check_feature(dev, DRIVER_MODESET)) {
+		ret = i915_gem_evict_inactive(dev, false);
+		if (ret) {
+			mutex_unlock(&dev->struct_mutex);
+			return ret;
+		}
+	}
+
+	i915_gem_reset_fences(dev);
+
+	/* Hack!  Don't let anybody do execbuf while we don't control the chip.
+	 * We need to replace this with a semaphore, or something.
+	 * And not confound mm.suspended!
+	 */
+	dev_priv->mm.suspended = 1;
+	del_timer_sync(&dev_priv->hangcheck_timer);
+
+	i915_kernel_lost_context(dev);
+	i915_gem_cleanup_ringbuffer(dev);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	/* Cancel the retire work handler, which should be idle now. */
+	cancel_delayed_work_sync(&dev_priv->mm.retire_work);
+
+	return 0;
+}
+
+void i915_gem_init_swizzling(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (INTEL_INFO(dev)->gen < 5 ||
+	    dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_NONE)
+		return;
+
+	I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) |
+				 DISP_TILE_SURFACE_SWIZZLING);
+
+	if (IS_GEN5(dev))
+		return;
+
+	I915_WRITE(TILECTL, I915_READ(TILECTL) | TILECTL_SWZCTL);
+	if (IS_GEN6(dev))
+		I915_WRITE(ARB_MODE, ARB_MODE_ENABLE(ARB_MODE_SWIZZLE_SNB));
+	else
+		I915_WRITE(ARB_MODE, ARB_MODE_ENABLE(ARB_MODE_SWIZZLE_IVB));
+}
+
+void i915_gem_init_ppgtt(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	uint32_t pd_offset;
+	struct intel_ring_buffer *ring;
+	struct i915_hw_ppgtt *ppgtt = dev_priv->mm.aliasing_ppgtt;
+	uint32_t __iomem *pd_addr;
+	uint32_t pd_entry;
+	int i;
+
+	if (!dev_priv->mm.aliasing_ppgtt)
+		return;
+
+
+	pd_addr = dev_priv->mm.gtt->gtt + ppgtt->pd_offset/sizeof(uint32_t);
+	for (i = 0; i < ppgtt->num_pd_entries; i++) {
+		dma_addr_t pt_addr;
+
+		if (dev_priv->mm.gtt->needs_dmar)
+			pt_addr = ppgtt->pt_dma_addr[i];
+		else
+			pt_addr = page_to_phys(ppgtt->pt_pages[i]);
+
+		pd_entry = GEN6_PDE_ADDR_ENCODE(pt_addr);
+		pd_entry |= GEN6_PDE_VALID;
+
+		writel(pd_entry, pd_addr + i);
+	}
+	readl(pd_addr);
+
+	pd_offset = ppgtt->pd_offset;
+	pd_offset /= 64; /* in cachelines, */
+	pd_offset <<= 16;
+
+	if (INTEL_INFO(dev)->gen == 6) {
+		uint32_t ecochk = I915_READ(GAM_ECOCHK);
+		I915_WRITE(GAM_ECOCHK, ecochk | ECOCHK_SNB_BIT |
+				       ECOCHK_PPGTT_CACHE64B);
+		I915_WRITE(GFX_MODE, GFX_MODE_ENABLE(GFX_PPGTT_ENABLE));
+	} else if (INTEL_INFO(dev)->gen >= 7) {
+		I915_WRITE(GAM_ECOCHK, ECOCHK_PPGTT_CACHE64B);
+		/* GFX_MODE is per-ring on gen7+ */
+	}
+
+	for (i = 0; i < I915_NUM_RINGS; i++) {
+		ring = &dev_priv->ring[i];
+
+		if (INTEL_INFO(dev)->gen >= 7)
+			I915_WRITE(RING_MODE_GEN7(ring),
+				   GFX_MODE_ENABLE(GFX_PPGTT_ENABLE));
+
+		I915_WRITE(RING_PP_DIR_DCLV(ring), PP_DIR_DCLV_2G);
+		I915_WRITE(RING_PP_DIR_BASE(ring), pd_offset);
+	}
+}
+
+int
+i915_gem_init_hw(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	i915_gem_init_swizzling(dev);
+
+	ret = intel_init_render_ring_buffer(dev);
+	if (ret)
+		return ret;
+
+	if (HAS_BSD(dev)) {
+		ret = intel_init_bsd_ring_buffer(dev);
+		if (ret)
+			goto cleanup_render_ring;
+	}
+
+	if (HAS_BLT(dev)) {
+		ret = intel_init_blt_ring_buffer(dev);
+		if (ret)
+			goto cleanup_bsd_ring;
+	}
+
+	dev_priv->next_seqno = 1;
+
+	i915_gem_init_ppgtt(dev);
+
+	return 0;
+
+cleanup_bsd_ring:
+	intel_cleanup_ring_buffer(&dev_priv->ring[VCS]);
+cleanup_render_ring:
+	intel_cleanup_ring_buffer(&dev_priv->ring[RCS]);
+	return ret;
+}
+
+void
+i915_gem_cleanup_ringbuffer(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int i;
+
+	for (i = 0; i < I915_NUM_RINGS; i++)
+		intel_cleanup_ring_buffer(&dev_priv->ring[i]);
+}
+
+int
+i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret, i;
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return 0;
+
+	if (atomic_read(&dev_priv->mm.wedged)) {
+		DRM_ERROR("Reenabling wedged hardware, good luck\n");
+		atomic_set(&dev_priv->mm.wedged, 0);
+	}
+
+	mutex_lock(&dev->struct_mutex);
+	dev_priv->mm.suspended = 0;
+
+	ret = i915_gem_init_hw(dev);
+	if (ret != 0) {
+		mutex_unlock(&dev->struct_mutex);
+		return ret;
+	}
+
+	BUG_ON(!list_empty(&dev_priv->mm.active_list));
+	BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+	BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
+	for (i = 0; i < I915_NUM_RINGS; i++) {
+		BUG_ON(!list_empty(&dev_priv->ring[i].active_list));
+		BUG_ON(!list_empty(&dev_priv->ring[i].request_list));
+	}
+	mutex_unlock(&dev->struct_mutex);
+
+	ret = drm_irq_install(dev);
+	if (ret)
+		goto cleanup_ringbuffer;
+
+	return 0;
+
+cleanup_ringbuffer:
+	mutex_lock(&dev->struct_mutex);
+	i915_gem_cleanup_ringbuffer(dev);
+	dev_priv->mm.suspended = 1;
+	mutex_unlock(&dev->struct_mutex);
+
+	return ret;
+}
+
+int
+i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv)
+{
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return 0;
+
+	drm_irq_uninstall(dev);
+	return i915_gem_idle(dev);
+}
+
+void
+i915_gem_lastclose(struct drm_device *dev)
+{
+	int ret;
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return;
+
+	ret = i915_gem_idle(dev);
+	if (ret)
+		DRM_ERROR("failed to idle hardware: %d\n", ret);
+}
+
+static void
+init_ring_lists(struct intel_ring_buffer *ring)
+{
+	INIT_LIST_HEAD(&ring->active_list);
+	INIT_LIST_HEAD(&ring->request_list);
+	INIT_LIST_HEAD(&ring->gpu_write_list);
+}
+
+void
+i915_gem_load(struct drm_device *dev)
+{
+	int i;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	INIT_LIST_HEAD(&dev_priv->mm.active_list);
+	INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
+	INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
+	INIT_LIST_HEAD(&dev_priv->mm.pinned_list);
+	INIT_LIST_HEAD(&dev_priv->mm.fence_list);
+	INIT_LIST_HEAD(&dev_priv->mm.deferred_free_list);
+	INIT_LIST_HEAD(&dev_priv->mm.gtt_list);
+	for (i = 0; i < I915_NUM_RINGS; i++)
+		init_ring_lists(&dev_priv->ring[i]);
+	for (i = 0; i < I915_MAX_NUM_FENCES; i++)
+		INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list);
+	INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
+			  i915_gem_retire_work_handler);
+	init_completion(&dev_priv->error_completion);
+
+	/* On GEN3 we really need to make sure the ARB C3 LP bit is set */
+	if (IS_GEN3(dev)) {
+		u32 tmp = I915_READ(MI_ARB_STATE);
+		if (!(tmp & MI_ARB_C3_LP_WRITE_ENABLE)) {
+			/* arb state is a masked write, so set bit + bit in mask */
+			tmp = MI_ARB_C3_LP_WRITE_ENABLE | (MI_ARB_C3_LP_WRITE_ENABLE << MI_ARB_MASK_SHIFT);
+			I915_WRITE(MI_ARB_STATE, tmp);
+		}
+	}
+
+	dev_priv->relative_constants_mode = I915_EXEC_CONSTANTS_REL_GENERAL;
+
+	/* Old X drivers will take 0-2 for front, back, depth buffers */
+	if (!drm_core_check_feature(dev, DRIVER_MODESET))
+		dev_priv->fence_reg_start = 3;
+
+	if (INTEL_INFO(dev)->gen >= 4 || IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+		dev_priv->num_fence_regs = 16;
+	else
+		dev_priv->num_fence_regs = 8;
+
+	/* Initialize fence registers to zero */
+	for (i = 0; i < dev_priv->num_fence_regs; i++) {
+		i915_gem_clear_fence_reg(dev, &dev_priv->fence_regs[i]);
+	}
+
+	i915_gem_detect_bit_6_swizzle(dev);
+	init_waitqueue_head(&dev_priv->pending_flip_queue);
+
+	dev_priv->mm.interruptible = true;
+
+	dev_priv->mm.inactive_shrinker.shrink = i915_gem_inactive_shrink;
+	dev_priv->mm.inactive_shrinker.seeks = DEFAULT_SEEKS;
+	register_shrinker(&dev_priv->mm.inactive_shrinker);
+}
+
+/*
+ * Create a physically contiguous memory object for this object
+ * e.g. for cursor + overlay regs
+ */
+static int i915_gem_init_phys_object(struct drm_device *dev,
+				     int id, int size, int align)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_phys_object *phys_obj;
+	int ret;
+
+	if (dev_priv->mm.phys_objs[id - 1] || !size)
+		return 0;
+
+	phys_obj = kzalloc(sizeof(struct drm_i915_gem_phys_object), GFP_KERNEL);
+	if (!phys_obj)
+		return -ENOMEM;
+
+	phys_obj->id = id;
+
+	phys_obj->handle = drm_pci_alloc(dev, size, align);
+	if (!phys_obj->handle) {
+		ret = -ENOMEM;
+		goto kfree_obj;
+	}
+#ifdef CONFIG_X86
+	set_memory_wc((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE);
+#endif
+
+	dev_priv->mm.phys_objs[id - 1] = phys_obj;
+
+	return 0;
+kfree_obj:
+	kfree(phys_obj);
+	return ret;
+}
+
+static void i915_gem_free_phys_object(struct drm_device *dev, int id)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_phys_object *phys_obj;
+
+	if (!dev_priv->mm.phys_objs[id - 1])
+		return;
+
+	phys_obj = dev_priv->mm.phys_objs[id - 1];
+	if (phys_obj->cur_obj) {
+		i915_gem_detach_phys_object(dev, phys_obj->cur_obj);
+	}
+
+#ifdef CONFIG_X86
+	set_memory_wb((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE);
+#endif
+	drm_pci_free(dev, phys_obj->handle);
+	kfree(phys_obj);
+	dev_priv->mm.phys_objs[id - 1] = NULL;
+}
+
+void i915_gem_free_all_phys_object(struct drm_device *dev)
+{
+	int i;
+
+	for (i = I915_GEM_PHYS_CURSOR_0; i <= I915_MAX_PHYS_OBJECT; i++)
+		i915_gem_free_phys_object(dev, i);
+}
+
+void i915_gem_detach_phys_object(struct drm_device *dev,
+				 struct drm_i915_gem_object *obj)
+{
+	struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
+	char *vaddr;
+	int i;
+	int page_count;
+
+	if (!obj->phys_obj)
+		return;
+	vaddr = obj->phys_obj->handle->vaddr;
+
+	page_count = obj->base.size / PAGE_SIZE;
+	for (i = 0; i < page_count; i++) {
+		struct page *page = shmem_read_mapping_page(mapping, i);
+		if (!IS_ERR(page)) {
+			char *dst = kmap_atomic(page);
+			memcpy(dst, vaddr + i*PAGE_SIZE, PAGE_SIZE);
+			kunmap_atomic(dst);
+
+			drm_clflush_pages(&page, 1);
+
+			set_page_dirty(page);
+			mark_page_accessed(page);
+			page_cache_release(page);
+		}
+	}
+	intel_gtt_chipset_flush();
+
+	obj->phys_obj->cur_obj = NULL;
+	obj->phys_obj = NULL;
+}
+
+int
+i915_gem_attach_phys_object(struct drm_device *dev,
+			    struct drm_i915_gem_object *obj,
+			    int id,
+			    int align)
+{
+	struct address_space *mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret = 0;
+	int page_count;
+	int i;
+
+	if (id > I915_MAX_PHYS_OBJECT)
+		return -EINVAL;
+
+	if (obj->phys_obj) {
+		if (obj->phys_obj->id == id)
+			return 0;
+		i915_gem_detach_phys_object(dev, obj);
+	}
+
+	/* create a new object */
+	if (!dev_priv->mm.phys_objs[id - 1]) {
+		ret = i915_gem_init_phys_object(dev, id,
+						obj->base.size, align);
+		if (ret) {
+			DRM_ERROR("failed to init phys object %d size: %zu\n",
+				  id, obj->base.size);
+			return ret;
+		}
+	}
+
+	/* bind to the object */
+	obj->phys_obj = dev_priv->mm.phys_objs[id - 1];
+	obj->phys_obj->cur_obj = obj;
+
+	page_count = obj->base.size / PAGE_SIZE;
+
+	for (i = 0; i < page_count; i++) {
+		struct page *page;
+		char *dst, *src;
+
+		page = shmem_read_mapping_page(mapping, i);
+		if (IS_ERR(page))
+			return PTR_ERR(page);
+
+		src = kmap_atomic(page);
+		dst = obj->phys_obj->handle->vaddr + (i * PAGE_SIZE);
+		memcpy(dst, src, PAGE_SIZE);
+		kunmap_atomic(src);
+
+		mark_page_accessed(page);
+		page_cache_release(page);
+	}
+
+	return 0;
+}
+
+static int
+i915_gem_phys_pwrite(struct drm_device *dev,
+		     struct drm_i915_gem_object *obj,
+		     struct drm_i915_gem_pwrite *args,
+		     struct drm_file *file_priv)
+{
+	void *vaddr = obj->phys_obj->handle->vaddr + args->offset;
+	char __user *user_data = (char __user *) (uintptr_t) args->data_ptr;
+
+	if (__copy_from_user_inatomic_nocache(vaddr, user_data, args->size)) {
+		unsigned long unwritten;
+
+		/* The physical object once assigned is fixed for the lifetime
+		 * of the obj, so we can safely drop the lock and continue
+		 * to access vaddr.
+		 */
+		mutex_unlock(&dev->struct_mutex);
+		unwritten = copy_from_user(vaddr, user_data, args->size);
+		mutex_lock(&dev->struct_mutex);
+		if (unwritten)
+			return -EFAULT;
+	}
+
+	intel_gtt_chipset_flush();
+	return 0;
+}
+
+void i915_gem_release(struct drm_device *dev, struct drm_file *file)
+{
+	struct drm_i915_file_private *file_priv = file->driver_priv;
+
+	/* Clean up our request list when the client is going away, so that
+	 * later retire_requests won't dereference our soon-to-be-gone
+	 * file_priv.
+	 */
+	spin_lock(&file_priv->mm.lock);
+	while (!list_empty(&file_priv->mm.request_list)) {
+		struct drm_i915_gem_request *request;
+
+		request = list_first_entry(&file_priv->mm.request_list,
+					   struct drm_i915_gem_request,
+					   client_list);
+		list_del(&request->client_list);
+		request->file_priv = NULL;
+	}
+	spin_unlock(&file_priv->mm.lock);
+}
+
+static int
+i915_gpu_is_active(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int lists_empty;
+
+	lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
+		      list_empty(&dev_priv->mm.active_list);
+
+	return !lists_empty;
+}
+
+static int
+i915_gem_inactive_shrink(struct shrinker *shrinker, struct shrink_control *sc)
+{
+	struct drm_i915_private *dev_priv =
+		container_of(shrinker,
+			     struct drm_i915_private,
+			     mm.inactive_shrinker);
+	struct drm_device *dev = dev_priv->dev;
+	struct drm_i915_gem_object *obj, *next;
+	int nr_to_scan = sc->nr_to_scan;
+	int cnt;
+
+	if (!mutex_trylock(&dev->struct_mutex))
+		return 0;
+
+	/* "fast-path" to count number of available objects */
+	if (nr_to_scan == 0) {
+		cnt = 0;
+		list_for_each_entry(obj,
+				    &dev_priv->mm.inactive_list,
+				    mm_list)
+			cnt++;
+		mutex_unlock(&dev->struct_mutex);
+		return cnt / 100 * sysctl_vfs_cache_pressure;
+	}
+
+rescan:
+	/* first scan for clean buffers */
+	i915_gem_retire_requests(dev);
+
+	list_for_each_entry_safe(obj, next,
+				 &dev_priv->mm.inactive_list,
+				 mm_list) {
+		if (i915_gem_object_is_purgeable(obj)) {
+			if (i915_gem_object_unbind(obj) == 0 &&
+			    --nr_to_scan == 0)
+				break;
+		}
+	}
+
+	/* second pass, evict/count anything still on the inactive list */
+	cnt = 0;
+	list_for_each_entry_safe(obj, next,
+				 &dev_priv->mm.inactive_list,
+				 mm_list) {
+		if (nr_to_scan &&
+		    i915_gem_object_unbind(obj) == 0)
+			nr_to_scan--;
+		else
+			cnt++;
+	}
+
+	if (nr_to_scan && i915_gpu_is_active(dev)) {
+		/*
+		 * We are desperate for pages, so as a last resort, wait
+		 * for the GPU to finish and discard whatever we can.
+		 * This has a dramatic impact to reduce the number of
+		 * OOM-killer events whilst running the GPU aggressively.
+		 */
+		if (i915_gpu_idle(dev, true) == 0)
+			goto rescan;
+	}
+	mutex_unlock(&dev->struct_mutex);
+	return cnt / 100 * sysctl_vfs_cache_pressure;
+}
diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c
new file mode 100644
index 00000000..cc93cac2
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_gem_debug.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Keith Packard <keithp@keithp.com>
+ *
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+#if WATCH_LISTS
+int
+i915_verify_lists(struct drm_device *dev)
+{
+	static int warned;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	int err = 0;
+
+	if (warned)
+		return 0;
+
+	list_for_each_entry(obj, &dev_priv->render_ring.active_list, list) {
+		if (obj->base.dev != dev ||
+		    !atomic_read(&obj->base.refcount.refcount)) {
+			DRM_ERROR("freed render active %p\n", obj);
+			err++;
+			break;
+		} else if (!obj->active ||
+			   (obj->base.read_domains & I915_GEM_GPU_DOMAINS) == 0) {
+			DRM_ERROR("invalid render active %p (a %d r %x)\n",
+				  obj,
+				  obj->active,
+				  obj->base.read_domains);
+			err++;
+		} else if (obj->base.write_domain && list_empty(&obj->gpu_write_list)) {
+			DRM_ERROR("invalid render active %p (w %x, gwl %d)\n",
+				  obj,
+				  obj->base.write_domain,
+				  !list_empty(&obj->gpu_write_list));
+			err++;
+		}
+	}
+
+	list_for_each_entry(obj, &dev_priv->mm.flushing_list, list) {
+		if (obj->base.dev != dev ||
+		    !atomic_read(&obj->base.refcount.refcount)) {
+			DRM_ERROR("freed flushing %p\n", obj);
+			err++;
+			break;
+		} else if (!obj->active ||
+			   (obj->base.write_domain & I915_GEM_GPU_DOMAINS) == 0 ||
+			   list_empty(&obj->gpu_write_list)) {
+			DRM_ERROR("invalid flushing %p (a %d w %x gwl %d)\n",
+				  obj,
+				  obj->active,
+				  obj->base.write_domain,
+				  !list_empty(&obj->gpu_write_list));
+			err++;
+		}
+	}
+
+	list_for_each_entry(obj, &dev_priv->mm.gpu_write_list, gpu_write_list) {
+		if (obj->base.dev != dev ||
+		    !atomic_read(&obj->base.refcount.refcount)) {
+			DRM_ERROR("freed gpu write %p\n", obj);
+			err++;
+			break;
+		} else if (!obj->active ||
+			   (obj->base.write_domain & I915_GEM_GPU_DOMAINS) == 0) {
+			DRM_ERROR("invalid gpu write %p (a %d w %x)\n",
+				  obj,
+				  obj->active,
+				  obj->base.write_domain);
+			err++;
+		}
+	}
+
+	list_for_each_entry(obj, &dev_priv->mm.inactive_list, list) {
+		if (obj->base.dev != dev ||
+		    !atomic_read(&obj->base.refcount.refcount)) {
+			DRM_ERROR("freed inactive %p\n", obj);
+			err++;
+			break;
+		} else if (obj->pin_count || obj->active ||
+			   (obj->base.write_domain & I915_GEM_GPU_DOMAINS)) {
+			DRM_ERROR("invalid inactive %p (p %d a %d w %x)\n",
+				  obj,
+				  obj->pin_count, obj->active,
+				  obj->base.write_domain);
+			err++;
+		}
+	}
+
+	list_for_each_entry(obj, &dev_priv->mm.pinned_list, list) {
+		if (obj->base.dev != dev ||
+		    !atomic_read(&obj->base.refcount.refcount)) {
+			DRM_ERROR("freed pinned %p\n", obj);
+			err++;
+			break;
+		} else if (!obj->pin_count || obj->active ||
+			   (obj->base.write_domain & I915_GEM_GPU_DOMAINS)) {
+			DRM_ERROR("invalid pinned %p (p %d a %d w %x)\n",
+				  obj,
+				  obj->pin_count, obj->active,
+				  obj->base.write_domain);
+			err++;
+		}
+	}
+
+	return warned = err;
+}
+#endif /* WATCH_INACTIVE */
+
+#if WATCH_COHERENCY
+void
+i915_gem_object_check_coherency(struct drm_i915_gem_object *obj, int handle)
+{
+	struct drm_device *dev = obj->base.dev;
+	int page;
+	uint32_t *gtt_mapping;
+	uint32_t *backing_map = NULL;
+	int bad_count = 0;
+
+	DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %zdkb):\n",
+		 __func__, obj, obj->gtt_offset, handle,
+		 obj->size / 1024);
+
+	gtt_mapping = ioremap(dev->agp->base + obj->gtt_offset, obj->base.size);
+	if (gtt_mapping == NULL) {
+		DRM_ERROR("failed to map GTT space\n");
+		return;
+	}
+
+	for (page = 0; page < obj->size / PAGE_SIZE; page++) {
+		int i;
+
+		backing_map = kmap_atomic(obj->pages[page]);
+
+		if (backing_map == NULL) {
+			DRM_ERROR("failed to map backing page\n");
+			goto out;
+		}
+
+		for (i = 0; i < PAGE_SIZE / 4; i++) {
+			uint32_t cpuval = backing_map[i];
+			uint32_t gttval = readl(gtt_mapping +
+						page * 1024 + i);
+
+			if (cpuval != gttval) {
+				DRM_INFO("incoherent CPU vs GPU at 0x%08x: "
+					 "0x%08x vs 0x%08x\n",
+					 (int)(obj->gtt_offset +
+					       page * PAGE_SIZE + i * 4),
+					 cpuval, gttval);
+				if (bad_count++ >= 8) {
+					DRM_INFO("...\n");
+					goto out;
+				}
+			}
+		}
+		kunmap_atomic(backing_map);
+		backing_map = NULL;
+	}
+
+ out:
+	if (backing_map != NULL)
+		kunmap_atomic(backing_map);
+	iounmap(gtt_mapping);
+
+	/* give syslog time to catch up */
+	msleep(1);
+
+	/* Directly flush the object, since we just loaded values with the CPU
+	 * from the backing pages and we don't want to disturb the cache
+	 * management that we're trying to observe.
+	 */
+
+	i915_gem_clflush_object(obj);
+}
+#endif
diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c
new file mode 100644
index 00000000..21a82710
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_gem_evict.c
@@ -0,0 +1,207 @@
+/*
+ * Copyright © 2008-2010 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *    Chris Wilson <chris@chris-wilson.co.uuk>
+ *
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drv.h"
+#include "i915_drm.h"
+#include "i915_trace.h"
+
+static bool
+mark_free(struct drm_i915_gem_object *obj, struct list_head *unwind)
+{
+	list_add(&obj->exec_list, unwind);
+	return drm_mm_scan_add_block(obj->gtt_space);
+}
+
+int
+i915_gem_evict_something(struct drm_device *dev, int min_size,
+			 unsigned alignment, bool mappable)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct list_head eviction_list, unwind_list;
+	struct drm_i915_gem_object *obj;
+	int ret = 0;
+
+	trace_i915_gem_evict(dev, min_size, alignment, mappable);
+
+	/*
+	 * The goal is to evict objects and amalgamate space in LRU order.
+	 * The oldest idle objects reside on the inactive list, which is in
+	 * retirement order. The next objects to retire are those on the (per
+	 * ring) active list that do not have an outstanding flush. Once the
+	 * hardware reports completion (the seqno is updated after the
+	 * batchbuffer has been finished) the clean buffer objects would
+	 * be retired to the inactive list. Any dirty objects would be added
+	 * to the tail of the flushing list. So after processing the clean
+	 * active objects we need to emit a MI_FLUSH to retire the flushing
+	 * list, hence the retirement order of the flushing list is in
+	 * advance of the dirty objects on the active lists.
+	 *
+	 * The retirement sequence is thus:
+	 *   1. Inactive objects (already retired)
+	 *   2. Clean active objects
+	 *   3. Flushing list
+	 *   4. Dirty active objects.
+	 *
+	 * On each list, the oldest objects lie at the HEAD with the freshest
+	 * object on the TAIL.
+	 */
+
+	INIT_LIST_HEAD(&unwind_list);
+	if (mappable)
+		drm_mm_init_scan_with_range(&dev_priv->mm.gtt_space, min_size,
+					    alignment, 0,
+					    dev_priv->mm.gtt_mappable_end);
+	else
+		drm_mm_init_scan(&dev_priv->mm.gtt_space, min_size, alignment);
+
+	/* First see if there is a large enough contiguous idle region... */
+	list_for_each_entry(obj, &dev_priv->mm.inactive_list, mm_list) {
+		if (mark_free(obj, &unwind_list))
+			goto found;
+	}
+
+	/* Now merge in the soon-to-be-expired objects... */
+	list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
+		/* Does the object require an outstanding flush? */
+		if (obj->base.write_domain || obj->pin_count)
+			continue;
+
+		if (mark_free(obj, &unwind_list))
+			goto found;
+	}
+
+	/* Finally add anything with a pending flush (in order of retirement) */
+	list_for_each_entry(obj, &dev_priv->mm.flushing_list, mm_list) {
+		if (obj->pin_count)
+			continue;
+
+		if (mark_free(obj, &unwind_list))
+			goto found;
+	}
+	list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
+		if (!obj->base.write_domain || obj->pin_count)
+			continue;
+
+		if (mark_free(obj, &unwind_list))
+			goto found;
+	}
+
+	/* Nothing found, clean up and bail out! */
+	while (!list_empty(&unwind_list)) {
+		obj = list_first_entry(&unwind_list,
+				       struct drm_i915_gem_object,
+				       exec_list);
+
+		ret = drm_mm_scan_remove_block(obj->gtt_space);
+		BUG_ON(ret);
+
+		list_del_init(&obj->exec_list);
+	}
+
+	/* We expect the caller to unpin, evict all and try again, or give up.
+	 * So calling i915_gem_evict_everything() is unnecessary.
+	 */
+	return -ENOSPC;
+
+found:
+	/* drm_mm doesn't allow any other other operations while
+	 * scanning, therefore store to be evicted objects on a
+	 * temporary list. */
+	INIT_LIST_HEAD(&eviction_list);
+	while (!list_empty(&unwind_list)) {
+		obj = list_first_entry(&unwind_list,
+				       struct drm_i915_gem_object,
+				       exec_list);
+		if (drm_mm_scan_remove_block(obj->gtt_space)) {
+			list_move(&obj->exec_list, &eviction_list);
+			drm_gem_object_reference(&obj->base);
+			continue;
+		}
+		list_del_init(&obj->exec_list);
+	}
+
+	/* Unbinding will emit any required flushes */
+	while (!list_empty(&eviction_list)) {
+		obj = list_first_entry(&eviction_list,
+				       struct drm_i915_gem_object,
+				       exec_list);
+		if (ret == 0)
+			ret = i915_gem_object_unbind(obj);
+
+		list_del_init(&obj->exec_list);
+		drm_gem_object_unreference(&obj->base);
+	}
+
+	return ret;
+}
+
+int
+i915_gem_evict_everything(struct drm_device *dev, bool purgeable_only)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+	bool lists_empty;
+
+	lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
+		       list_empty(&dev_priv->mm.flushing_list) &&
+		       list_empty(&dev_priv->mm.active_list));
+	if (lists_empty)
+		return -ENOSPC;
+
+	trace_i915_gem_evict_everything(dev, purgeable_only);
+
+	/* Flush everything (on to the inactive lists) and evict */
+	ret = i915_gpu_idle(dev, true);
+	if (ret)
+		return ret;
+
+	BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+
+	return i915_gem_evict_inactive(dev, purgeable_only);
+}
+
+/** Unbinds all inactive objects. */
+int
+i915_gem_evict_inactive(struct drm_device *dev, bool purgeable_only)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj, *next;
+
+	list_for_each_entry_safe(obj, next,
+				 &dev_priv->mm.inactive_list, mm_list) {
+		if (!purgeable_only || obj->madv != I915_MADV_WILLNEED) {
+			int ret = i915_gem_object_unbind(obj);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
new file mode 100644
index 00000000..de431942
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -0,0 +1,1456 @@
+/*
+ * Copyright © 2008,2010 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *    Chris Wilson <chris@chris-wilson.co.uk>
+ *
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "i915_trace.h"
+#include "intel_drv.h"
+#include <linux/dma_remapping.h>
+
+struct change_domains {
+	uint32_t invalidate_domains;
+	uint32_t flush_domains;
+	uint32_t flush_rings;
+	uint32_t flips;
+};
+
+/*
+ * Set the next domain for the specified object. This
+ * may not actually perform the necessary flushing/invaliding though,
+ * as that may want to be batched with other set_domain operations
+ *
+ * This is (we hope) the only really tricky part of gem. The goal
+ * is fairly simple -- track which caches hold bits of the object
+ * and make sure they remain coherent. A few concrete examples may
+ * help to explain how it works. For shorthand, we use the notation
+ * (read_domains, write_domain), e.g. (CPU, CPU) to indicate the
+ * a pair of read and write domain masks.
+ *
+ * Case 1: the batch buffer
+ *
+ *	1. Allocated
+ *	2. Written by CPU
+ *	3. Mapped to GTT
+ *	4. Read by GPU
+ *	5. Unmapped from GTT
+ *	6. Freed
+ *
+ *	Let's take these a step at a time
+ *
+ *	1. Allocated
+ *		Pages allocated from the kernel may still have
+ *		cache contents, so we set them to (CPU, CPU) always.
+ *	2. Written by CPU (using pwrite)
+ *		The pwrite function calls set_domain (CPU, CPU) and
+ *		this function does nothing (as nothing changes)
+ *	3. Mapped by GTT
+ *		This function asserts that the object is not
+ *		currently in any GPU-based read or write domains
+ *	4. Read by GPU
+ *		i915_gem_execbuffer calls set_domain (COMMAND, 0).
+ *		As write_domain is zero, this function adds in the
+ *		current read domains (CPU+COMMAND, 0).
+ *		flush_domains is set to CPU.
+ *		invalidate_domains is set to COMMAND
+ *		clflush is run to get data out of the CPU caches
+ *		then i915_dev_set_domain calls i915_gem_flush to
+ *		emit an MI_FLUSH and drm_agp_chipset_flush
+ *	5. Unmapped from GTT
+ *		i915_gem_object_unbind calls set_domain (CPU, CPU)
+ *		flush_domains and invalidate_domains end up both zero
+ *		so no flushing/invalidating happens
+ *	6. Freed
+ *		yay, done
+ *
+ * Case 2: The shared render buffer
+ *
+ *	1. Allocated
+ *	2. Mapped to GTT
+ *	3. Read/written by GPU
+ *	4. set_domain to (CPU,CPU)
+ *	5. Read/written by CPU
+ *	6. Read/written by GPU
+ *
+ *	1. Allocated
+ *		Same as last example, (CPU, CPU)
+ *	2. Mapped to GTT
+ *		Nothing changes (assertions find that it is not in the GPU)
+ *	3. Read/written by GPU
+ *		execbuffer calls set_domain (RENDER, RENDER)
+ *		flush_domains gets CPU
+ *		invalidate_domains gets GPU
+ *		clflush (obj)
+ *		MI_FLUSH and drm_agp_chipset_flush
+ *	4. set_domain (CPU, CPU)
+ *		flush_domains gets GPU
+ *		invalidate_domains gets CPU
+ *		wait_rendering (obj) to make sure all drawing is complete.
+ *		This will include an MI_FLUSH to get the data from GPU
+ *		to memory
+ *		clflush (obj) to invalidate the CPU cache
+ *		Another MI_FLUSH in i915_gem_flush (eliminate this somehow?)
+ *	5. Read/written by CPU
+ *		cache lines are loaded and dirtied
+ *	6. Read written by GPU
+ *		Same as last GPU access
+ *
+ * Case 3: The constant buffer
+ *
+ *	1. Allocated
+ *	2. Written by CPU
+ *	3. Read by GPU
+ *	4. Updated (written) by CPU again
+ *	5. Read by GPU
+ *
+ *	1. Allocated
+ *		(CPU, CPU)
+ *	2. Written by CPU
+ *		(CPU, CPU)
+ *	3. Read by GPU
+ *		(CPU+RENDER, 0)
+ *		flush_domains = CPU
+ *		invalidate_domains = RENDER
+ *		clflush (obj)
+ *		MI_FLUSH
+ *		drm_agp_chipset_flush
+ *	4. Updated (written) by CPU again
+ *		(CPU, CPU)
+ *		flush_domains = 0 (no previous write domain)
+ *		invalidate_domains = 0 (no new read domains)
+ *	5. Read by GPU
+ *		(CPU+RENDER, 0)
+ *		flush_domains = CPU
+ *		invalidate_domains = RENDER
+ *		clflush (obj)
+ *		MI_FLUSH
+ *		drm_agp_chipset_flush
+ */
+static void
+i915_gem_object_set_to_gpu_domain(struct drm_i915_gem_object *obj,
+				  struct intel_ring_buffer *ring,
+				  struct change_domains *cd)
+{
+	uint32_t invalidate_domains = 0, flush_domains = 0;
+
+	/*
+	 * If the object isn't moving to a new write domain,
+	 * let the object stay in multiple read domains
+	 */
+	if (obj->base.pending_write_domain == 0)
+		obj->base.pending_read_domains |= obj->base.read_domains;
+
+	/*
+	 * Flush the current write domain if
+	 * the new read domains don't match. Invalidate
+	 * any read domains which differ from the old
+	 * write domain
+	 */
+	if (obj->base.write_domain &&
+	    (((obj->base.write_domain != obj->base.pending_read_domains ||
+	       obj->ring != ring)) ||
+	     (obj->fenced_gpu_access && !obj->pending_fenced_gpu_access))) {
+		flush_domains |= obj->base.write_domain;
+		invalidate_domains |=
+			obj->base.pending_read_domains & ~obj->base.write_domain;
+	}
+	/*
+	 * Invalidate any read caches which may have
+	 * stale data. That is, any new read domains.
+	 */
+	invalidate_domains |= obj->base.pending_read_domains & ~obj->base.read_domains;
+	if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU)
+		i915_gem_clflush_object(obj);
+
+	if (obj->base.pending_write_domain)
+		cd->flips |= atomic_read(&obj->pending_flip);
+
+	/* The actual obj->write_domain will be updated with
+	 * pending_write_domain after we emit the accumulated flush for all
+	 * of our domain changes in execbuffers (which clears objects'
+	 * write_domains).  So if we have a current write domain that we
+	 * aren't changing, set pending_write_domain to that.
+	 */
+	if (flush_domains == 0 && obj->base.pending_write_domain == 0)
+		obj->base.pending_write_domain = obj->base.write_domain;
+
+	cd->invalidate_domains |= invalidate_domains;
+	cd->flush_domains |= flush_domains;
+	if (flush_domains & I915_GEM_GPU_DOMAINS)
+		cd->flush_rings |= intel_ring_flag(obj->ring);
+	if (invalidate_domains & I915_GEM_GPU_DOMAINS)
+		cd->flush_rings |= intel_ring_flag(ring);
+}
+
+struct eb_objects {
+	int and;
+	struct hlist_head buckets[0];
+};
+
+static struct eb_objects *
+eb_create(int size)
+{
+	struct eb_objects *eb;
+	int count = PAGE_SIZE / sizeof(struct hlist_head) / 2;
+	while (count > size)
+		count >>= 1;
+	eb = kzalloc(count*sizeof(struct hlist_head) +
+		     sizeof(struct eb_objects),
+		     GFP_KERNEL);
+	if (eb == NULL)
+		return eb;
+
+	eb->and = count - 1;
+	return eb;
+}
+
+static void
+eb_reset(struct eb_objects *eb)
+{
+	memset(eb->buckets, 0, (eb->and+1)*sizeof(struct hlist_head));
+}
+
+static void
+eb_add_object(struct eb_objects *eb, struct drm_i915_gem_object *obj)
+{
+	hlist_add_head(&obj->exec_node,
+		       &eb->buckets[obj->exec_handle & eb->and]);
+}
+
+static struct drm_i915_gem_object *
+eb_get_object(struct eb_objects *eb, unsigned long handle)
+{
+	struct hlist_head *head;
+	struct hlist_node *node;
+	struct drm_i915_gem_object *obj;
+
+	head = &eb->buckets[handle & eb->and];
+	hlist_for_each(node, head) {
+		obj = hlist_entry(node, struct drm_i915_gem_object, exec_node);
+		if (obj->exec_handle == handle)
+			return obj;
+	}
+
+	return NULL;
+}
+
+static void
+eb_destroy(struct eb_objects *eb)
+{
+	kfree(eb);
+}
+
+static int
+i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
+				   struct eb_objects *eb,
+				   struct drm_i915_gem_relocation_entry *reloc)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_gem_object *target_obj;
+	uint32_t target_offset;
+	int ret = -EINVAL;
+
+	/* we've already hold a reference to all valid objects */
+	target_obj = &eb_get_object(eb, reloc->target_handle)->base;
+	if (unlikely(target_obj == NULL))
+		return -ENOENT;
+
+	target_offset = to_intel_bo(target_obj)->gtt_offset;
+
+	/* The target buffer should have appeared before us in the
+	 * exec_object list, so it should have a GTT space bound by now.
+	 */
+	if (unlikely(target_offset == 0)) {
+		DRM_DEBUG("No GTT space found for object %d\n",
+			  reloc->target_handle);
+		return ret;
+	}
+
+	/* Validate that the target is in a valid r/w GPU domain */
+	if (unlikely(reloc->write_domain & (reloc->write_domain - 1))) {
+		DRM_DEBUG("reloc with multiple write domains: "
+			  "obj %p target %d offset %d "
+			  "read %08x write %08x",
+			  obj, reloc->target_handle,
+			  (int) reloc->offset,
+			  reloc->read_domains,
+			  reloc->write_domain);
+		return ret;
+	}
+	if (unlikely((reloc->write_domain | reloc->read_domains)
+		     & ~I915_GEM_GPU_DOMAINS)) {
+		DRM_DEBUG("reloc with read/write non-GPU domains: "
+			  "obj %p target %d offset %d "
+			  "read %08x write %08x",
+			  obj, reloc->target_handle,
+			  (int) reloc->offset,
+			  reloc->read_domains,
+			  reloc->write_domain);
+		return ret;
+	}
+	if (unlikely(reloc->write_domain && target_obj->pending_write_domain &&
+		     reloc->write_domain != target_obj->pending_write_domain)) {
+		DRM_DEBUG("Write domain conflict: "
+			  "obj %p target %d offset %d "
+			  "new %08x old %08x\n",
+			  obj, reloc->target_handle,
+			  (int) reloc->offset,
+			  reloc->write_domain,
+			  target_obj->pending_write_domain);
+		return ret;
+	}
+
+	target_obj->pending_read_domains |= reloc->read_domains;
+	target_obj->pending_write_domain |= reloc->write_domain;
+
+	/* If the relocation already has the right value in it, no
+	 * more work needs to be done.
+	 */
+	if (target_offset == reloc->presumed_offset)
+		return 0;
+
+	/* Check that the relocation address is valid... */
+	if (unlikely(reloc->offset > obj->base.size - 4)) {
+		DRM_DEBUG("Relocation beyond object bounds: "
+			  "obj %p target %d offset %d size %d.\n",
+			  obj, reloc->target_handle,
+			  (int) reloc->offset,
+			  (int) obj->base.size);
+		return ret;
+	}
+	if (unlikely(reloc->offset & 3)) {
+		DRM_DEBUG("Relocation not 4-byte aligned: "
+			  "obj %p target %d offset %d.\n",
+			  obj, reloc->target_handle,
+			  (int) reloc->offset);
+		return ret;
+	}
+
+	reloc->delta += target_offset;
+	if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) {
+		uint32_t page_offset = reloc->offset & ~PAGE_MASK;
+		char *vaddr;
+
+		vaddr = kmap_atomic(obj->pages[reloc->offset >> PAGE_SHIFT]);
+		*(uint32_t *)(vaddr + page_offset) = reloc->delta;
+		kunmap_atomic(vaddr);
+	} else {
+		struct drm_i915_private *dev_priv = dev->dev_private;
+		uint32_t __iomem *reloc_entry;
+		void __iomem *reloc_page;
+
+		/* We can't wait for rendering with pagefaults disabled */
+		if (obj->active && in_atomic())
+			return -EFAULT;
+
+		ret = i915_gem_object_set_to_gtt_domain(obj, 1);
+		if (ret)
+			return ret;
+
+		/* Map the page containing the relocation we're going to perform.  */
+		reloc->offset += obj->gtt_offset;
+		reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
+						      reloc->offset & PAGE_MASK);
+		reloc_entry = (uint32_t __iomem *)
+			(reloc_page + (reloc->offset & ~PAGE_MASK));
+		iowrite32(reloc->delta, reloc_entry);
+		io_mapping_unmap_atomic(reloc_page);
+	}
+
+	/* and update the user's relocation entry */
+	reloc->presumed_offset = target_offset;
+
+	return 0;
+}
+
+static int
+i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj,
+				    struct eb_objects *eb)
+{
+	struct drm_i915_gem_relocation_entry __user *user_relocs;
+	struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
+	int i, ret;
+
+	user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
+	for (i = 0; i < entry->relocation_count; i++) {
+		struct drm_i915_gem_relocation_entry reloc;
+
+		if (__copy_from_user_inatomic(&reloc,
+					      user_relocs+i,
+					      sizeof(reloc)))
+			return -EFAULT;
+
+		ret = i915_gem_execbuffer_relocate_entry(obj, eb, &reloc);
+		if (ret)
+			return ret;
+
+		if (__copy_to_user_inatomic(&user_relocs[i].presumed_offset,
+					    &reloc.presumed_offset,
+					    sizeof(reloc.presumed_offset)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int
+i915_gem_execbuffer_relocate_object_slow(struct drm_i915_gem_object *obj,
+					 struct eb_objects *eb,
+					 struct drm_i915_gem_relocation_entry *relocs)
+{
+	const struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
+	int i, ret;
+
+	for (i = 0; i < entry->relocation_count; i++) {
+		ret = i915_gem_execbuffer_relocate_entry(obj, eb, &relocs[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int
+i915_gem_execbuffer_relocate(struct drm_device *dev,
+			     struct eb_objects *eb,
+			     struct list_head *objects)
+{
+	struct drm_i915_gem_object *obj;
+	int ret = 0;
+
+	/* This is the fast path and we cannot handle a pagefault whilst
+	 * holding the struct mutex lest the user pass in the relocations
+	 * contained within a mmaped bo. For in such a case we, the page
+	 * fault handler would call i915_gem_fault() and we would try to
+	 * acquire the struct mutex again. Obviously this is bad and so
+	 * lockdep complains vehemently.
+	 */
+	pagefault_disable();
+	list_for_each_entry(obj, objects, exec_list) {
+		ret = i915_gem_execbuffer_relocate_object(obj, eb);
+		if (ret)
+			break;
+	}
+	pagefault_enable();
+
+	return ret;
+}
+
+#define  __EXEC_OBJECT_HAS_FENCE (1<<31)
+
+static int
+pin_and_fence_object(struct drm_i915_gem_object *obj,
+		     struct intel_ring_buffer *ring)
+{
+	struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
+	bool has_fenced_gpu_access = INTEL_INFO(ring->dev)->gen < 4;
+	bool need_fence, need_mappable;
+	int ret;
+
+	need_fence =
+		has_fenced_gpu_access &&
+		entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
+		obj->tiling_mode != I915_TILING_NONE;
+	need_mappable =
+		entry->relocation_count ? true : need_fence;
+
+	ret = i915_gem_object_pin(obj, entry->alignment, need_mappable);
+	if (ret)
+		return ret;
+
+	if (has_fenced_gpu_access) {
+		if (entry->flags & EXEC_OBJECT_NEEDS_FENCE) {
+			if (obj->tiling_mode) {
+				ret = i915_gem_object_get_fence(obj, ring);
+				if (ret)
+					goto err_unpin;
+
+				entry->flags |= __EXEC_OBJECT_HAS_FENCE;
+				i915_gem_object_pin_fence(obj);
+			} else {
+				ret = i915_gem_object_put_fence(obj);
+				if (ret)
+					goto err_unpin;
+			}
+			obj->pending_fenced_gpu_access = true;
+		}
+	}
+
+	entry->offset = obj->gtt_offset;
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+	return ret;
+}
+
+static int
+i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring,
+			    struct drm_file *file,
+			    struct list_head *objects)
+{
+	drm_i915_private_t *dev_priv = ring->dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	int ret, retry;
+	bool has_fenced_gpu_access = INTEL_INFO(ring->dev)->gen < 4;
+	struct list_head ordered_objects;
+
+	INIT_LIST_HEAD(&ordered_objects);
+	while (!list_empty(objects)) {
+		struct drm_i915_gem_exec_object2 *entry;
+		bool need_fence, need_mappable;
+
+		obj = list_first_entry(objects,
+				       struct drm_i915_gem_object,
+				       exec_list);
+		entry = obj->exec_entry;
+
+		need_fence =
+			has_fenced_gpu_access &&
+			entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
+			obj->tiling_mode != I915_TILING_NONE;
+		need_mappable =
+			entry->relocation_count ? true : need_fence;
+
+		if (need_mappable)
+			list_move(&obj->exec_list, &ordered_objects);
+		else
+			list_move_tail(&obj->exec_list, &ordered_objects);
+
+		obj->base.pending_read_domains = 0;
+		obj->base.pending_write_domain = 0;
+	}
+	list_splice(&ordered_objects, objects);
+
+	/* Attempt to pin all of the buffers into the GTT.
+	 * This is done in 3 phases:
+	 *
+	 * 1a. Unbind all objects that do not match the GTT constraints for
+	 *     the execbuffer (fenceable, mappable, alignment etc).
+	 * 1b. Increment pin count for already bound objects.
+	 * 2.  Bind new objects.
+	 * 3.  Decrement pin count.
+	 *
+	 * This avoid unnecessary unbinding of later objects in order to makr
+	 * room for the earlier objects *unless* we need to defragment.
+	 */
+	retry = 0;
+	do {
+		ret = 0;
+
+		/* Unbind any ill-fitting objects or pin. */
+		list_for_each_entry(obj, objects, exec_list) {
+			struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
+			bool need_fence, need_mappable;
+
+			if (!obj->gtt_space)
+				continue;
+
+			need_fence =
+				has_fenced_gpu_access &&
+				entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
+				obj->tiling_mode != I915_TILING_NONE;
+			need_mappable =
+				entry->relocation_count ? true : need_fence;
+
+			if ((entry->alignment && obj->gtt_offset & (entry->alignment - 1)) ||
+			    (need_mappable && !obj->map_and_fenceable))
+				ret = i915_gem_object_unbind(obj);
+			else
+				ret = pin_and_fence_object(obj, ring);
+			if (ret)
+				goto err;
+		}
+
+		/* Bind fresh objects */
+		list_for_each_entry(obj, objects, exec_list) {
+			if (obj->gtt_space)
+				continue;
+
+			ret = pin_and_fence_object(obj, ring);
+			if (ret) {
+				int ret_ignore;
+
+				/* This can potentially raise a harmless
+				 * -EINVAL if we failed to bind in the above
+				 * call. It cannot raise -EINTR since we know
+				 * that the bo is freshly bound and so will
+				 * not need to be flushed or waited upon.
+				 */
+				ret_ignore = i915_gem_object_unbind(obj);
+				(void)ret_ignore;
+				WARN_ON(obj->gtt_space);
+				break;
+			}
+		}
+
+		/* Decrement pin count for bound objects */
+		list_for_each_entry(obj, objects, exec_list) {
+			struct drm_i915_gem_exec_object2 *entry;
+
+			if (!obj->gtt_space)
+				continue;
+
+			entry = obj->exec_entry;
+			if (entry->flags & __EXEC_OBJECT_HAS_FENCE) {
+				i915_gem_object_unpin_fence(obj);
+				entry->flags &= ~__EXEC_OBJECT_HAS_FENCE;
+			}
+
+			i915_gem_object_unpin(obj);
+
+			/* ... and ensure ppgtt mapping exist if needed. */
+			if (dev_priv->mm.aliasing_ppgtt && !obj->has_aliasing_ppgtt_mapping) {
+				i915_ppgtt_bind_object(dev_priv->mm.aliasing_ppgtt,
+						       obj, obj->cache_level);
+
+				obj->has_aliasing_ppgtt_mapping = 1;
+			}
+		}
+
+		if (ret != -ENOSPC || retry > 1)
+			return ret;
+
+		/* First attempt, just clear anything that is purgeable.
+		 * Second attempt, clear the entire GTT.
+		 */
+		ret = i915_gem_evict_everything(ring->dev, retry == 0);
+		if (ret)
+			return ret;
+
+		retry++;
+	} while (1);
+
+err:
+	list_for_each_entry_continue_reverse(obj, objects, exec_list) {
+		struct drm_i915_gem_exec_object2 *entry;
+
+		if (!obj->gtt_space)
+			continue;
+
+		entry = obj->exec_entry;
+		if (entry->flags & __EXEC_OBJECT_HAS_FENCE) {
+			i915_gem_object_unpin_fence(obj);
+			entry->flags &= ~__EXEC_OBJECT_HAS_FENCE;
+		}
+
+		i915_gem_object_unpin(obj);
+	}
+
+	return ret;
+}
+
+static int
+i915_gem_execbuffer_relocate_slow(struct drm_device *dev,
+				  struct drm_file *file,
+				  struct intel_ring_buffer *ring,
+				  struct list_head *objects,
+				  struct eb_objects *eb,
+				  struct drm_i915_gem_exec_object2 *exec,
+				  int count)
+{
+	struct drm_i915_gem_relocation_entry *reloc;
+	struct drm_i915_gem_object *obj;
+	int *reloc_offset;
+	int i, total, ret;
+
+	/* We may process another execbuffer during the unlock... */
+	while (!list_empty(objects)) {
+		obj = list_first_entry(objects,
+				       struct drm_i915_gem_object,
+				       exec_list);
+		list_del_init(&obj->exec_list);
+		drm_gem_object_unreference(&obj->base);
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	total = 0;
+	for (i = 0; i < count; i++)
+		total += exec[i].relocation_count;
+
+	reloc_offset = drm_malloc_ab(count, sizeof(*reloc_offset));
+	reloc = drm_malloc_ab(total, sizeof(*reloc));
+	if (reloc == NULL || reloc_offset == NULL) {
+		drm_free_large(reloc);
+		drm_free_large(reloc_offset);
+		mutex_lock(&dev->struct_mutex);
+		return -ENOMEM;
+	}
+
+	total = 0;
+	for (i = 0; i < count; i++) {
+		struct drm_i915_gem_relocation_entry __user *user_relocs;
+
+		user_relocs = (void __user *)(uintptr_t)exec[i].relocs_ptr;
+
+		if (copy_from_user(reloc+total, user_relocs,
+				   exec[i].relocation_count * sizeof(*reloc))) {
+			ret = -EFAULT;
+			mutex_lock(&dev->struct_mutex);
+			goto err;
+		}
+
+		reloc_offset[i] = total;
+		total += exec[i].relocation_count;
+	}
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret) {
+		mutex_lock(&dev->struct_mutex);
+		goto err;
+	}
+
+	/* reacquire the objects */
+	eb_reset(eb);
+	for (i = 0; i < count; i++) {
+		obj = to_intel_bo(drm_gem_object_lookup(dev, file,
+							exec[i].handle));
+		if (&obj->base == NULL) {
+			DRM_DEBUG("Invalid object handle %d at index %d\n",
+				   exec[i].handle, i);
+			ret = -ENOENT;
+			goto err;
+		}
+
+		list_add_tail(&obj->exec_list, objects);
+		obj->exec_handle = exec[i].handle;
+		obj->exec_entry = &exec[i];
+		eb_add_object(eb, obj);
+	}
+
+	ret = i915_gem_execbuffer_reserve(ring, file, objects);
+	if (ret)
+		goto err;
+
+	list_for_each_entry(obj, objects, exec_list) {
+		int offset = obj->exec_entry - exec;
+		ret = i915_gem_execbuffer_relocate_object_slow(obj, eb,
+							       reloc + reloc_offset[offset]);
+		if (ret)
+			goto err;
+	}
+
+	/* Leave the user relocations as are, this is the painfully slow path,
+	 * and we want to avoid the complication of dropping the lock whilst
+	 * having buffers reserved in the aperture and so causing spurious
+	 * ENOSPC for random operations.
+	 */
+
+err:
+	drm_free_large(reloc);
+	drm_free_large(reloc_offset);
+	return ret;
+}
+
+static int
+i915_gem_execbuffer_flush(struct drm_device *dev,
+			  uint32_t invalidate_domains,
+			  uint32_t flush_domains,
+			  uint32_t flush_rings)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int i, ret;
+
+	if (flush_domains & I915_GEM_DOMAIN_CPU)
+		intel_gtt_chipset_flush();
+
+	if (flush_domains & I915_GEM_DOMAIN_GTT)
+		wmb();
+
+	if ((flush_domains | invalidate_domains) & I915_GEM_GPU_DOMAINS) {
+		for (i = 0; i < I915_NUM_RINGS; i++)
+			if (flush_rings & (1 << i)) {
+				ret = i915_gem_flush_ring(&dev_priv->ring[i],
+							  invalidate_domains,
+							  flush_domains);
+				if (ret)
+					return ret;
+			}
+	}
+
+	return 0;
+}
+
+static bool
+intel_enable_semaphores(struct drm_device *dev)
+{
+	if (INTEL_INFO(dev)->gen < 6)
+		return 0;
+
+	if (i915_semaphores >= 0)
+		return i915_semaphores;
+
+	/* Disable semaphores on SNB */
+	if (INTEL_INFO(dev)->gen == 6)
+		return 0;
+
+	return 1;
+}
+
+static int
+i915_gem_execbuffer_sync_rings(struct drm_i915_gem_object *obj,
+			       struct intel_ring_buffer *to)
+{
+	struct intel_ring_buffer *from = obj->ring;
+	u32 seqno;
+	int ret, idx;
+
+	if (from == NULL || to == from)
+		return 0;
+
+	/* XXX gpu semaphores are implicated in various hard hangs on SNB */
+	if (!intel_enable_semaphores(obj->base.dev))
+		return i915_gem_object_wait_rendering(obj);
+
+	idx = intel_ring_sync_index(from, to);
+
+	seqno = obj->last_rendering_seqno;
+	if (seqno <= from->sync_seqno[idx])
+		return 0;
+
+	if (seqno == from->outstanding_lazy_request) {
+		struct drm_i915_gem_request *request;
+
+		request = kzalloc(sizeof(*request), GFP_KERNEL);
+		if (request == NULL)
+			return -ENOMEM;
+
+		ret = i915_add_request(from, NULL, request);
+		if (ret) {
+			kfree(request);
+			return ret;
+		}
+
+		seqno = request->seqno;
+	}
+
+	from->sync_seqno[idx] = seqno;
+
+	return to->sync_to(to, from, seqno - 1);
+}
+
+static int
+i915_gem_execbuffer_wait_for_flips(struct intel_ring_buffer *ring, u32 flips)
+{
+	u32 plane, flip_mask;
+	int ret;
+
+	/* Check for any pending flips. As we only maintain a flip queue depth
+	 * of 1, we can simply insert a WAIT for the next display flip prior
+	 * to executing the batch and avoid stalling the CPU.
+	 */
+
+	for (plane = 0; flips >> plane; plane++) {
+		if (((flips >> plane) & 1) == 0)
+			continue;
+
+		if (plane)
+			flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
+		else
+			flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
+
+		ret = intel_ring_begin(ring, 2);
+		if (ret)
+			return ret;
+
+		intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
+		intel_ring_emit(ring, MI_NOOP);
+		intel_ring_advance(ring);
+	}
+
+	return 0;
+}
+
+
+static int
+i915_gem_execbuffer_move_to_gpu(struct intel_ring_buffer *ring,
+				struct list_head *objects)
+{
+	struct drm_i915_gem_object *obj;
+	struct change_domains cd;
+	int ret;
+
+	memset(&cd, 0, sizeof(cd));
+	list_for_each_entry(obj, objects, exec_list)
+		i915_gem_object_set_to_gpu_domain(obj, ring, &cd);
+
+	if (cd.invalidate_domains | cd.flush_domains) {
+		ret = i915_gem_execbuffer_flush(ring->dev,
+						cd.invalidate_domains,
+						cd.flush_domains,
+						cd.flush_rings);
+		if (ret)
+			return ret;
+	}
+
+	if (cd.flips) {
+		ret = i915_gem_execbuffer_wait_for_flips(ring, cd.flips);
+		if (ret)
+			return ret;
+	}
+
+	list_for_each_entry(obj, objects, exec_list) {
+		ret = i915_gem_execbuffer_sync_rings(obj, ring);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static bool
+i915_gem_check_execbuffer(struct drm_i915_gem_execbuffer2 *exec)
+{
+	return ((exec->batch_start_offset | exec->batch_len) & 0x7) == 0;
+}
+
+static int
+validate_exec_list(struct drm_i915_gem_exec_object2 *exec,
+		   int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		char __user *ptr = (char __user *)(uintptr_t)exec[i].relocs_ptr;
+		int length; /* limited by fault_in_pages_readable() */
+
+		/* First check for malicious input causing overflow */
+		if (exec[i].relocation_count >
+		    INT_MAX / sizeof(struct drm_i915_gem_relocation_entry))
+			return -EINVAL;
+
+		length = exec[i].relocation_count *
+			sizeof(struct drm_i915_gem_relocation_entry);
+		if (!access_ok(VERIFY_READ, ptr, length))
+			return -EFAULT;
+
+		/* we may also need to update the presumed offsets */
+		if (!access_ok(VERIFY_WRITE, ptr, length))
+			return -EFAULT;
+
+		if (fault_in_pages_readable(ptr, length))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static void
+i915_gem_execbuffer_move_to_active(struct list_head *objects,
+				   struct intel_ring_buffer *ring,
+				   u32 seqno)
+{
+	struct drm_i915_gem_object *obj;
+
+	list_for_each_entry(obj, objects, exec_list) {
+		  u32 old_read = obj->base.read_domains;
+		  u32 old_write = obj->base.write_domain;
+
+
+		obj->base.read_domains = obj->base.pending_read_domains;
+		obj->base.write_domain = obj->base.pending_write_domain;
+		obj->fenced_gpu_access = obj->pending_fenced_gpu_access;
+
+		i915_gem_object_move_to_active(obj, ring, seqno);
+		if (obj->base.write_domain) {
+			obj->dirty = 1;
+			obj->pending_gpu_write = true;
+			list_move_tail(&obj->gpu_write_list,
+				       &ring->gpu_write_list);
+			intel_mark_busy(ring->dev, obj);
+		}
+
+		trace_i915_gem_object_change_domain(obj, old_read, old_write);
+	}
+}
+
+static void
+i915_gem_execbuffer_retire_commands(struct drm_device *dev,
+				    struct drm_file *file,
+				    struct intel_ring_buffer *ring)
+{
+	struct drm_i915_gem_request *request;
+	u32 invalidate;
+
+	/*
+	 * Ensure that the commands in the batch buffer are
+	 * finished before the interrupt fires.
+	 *
+	 * The sampler always gets flushed on i965 (sigh).
+	 */
+	invalidate = I915_GEM_DOMAIN_COMMAND;
+	if (INTEL_INFO(dev)->gen >= 4)
+		invalidate |= I915_GEM_DOMAIN_SAMPLER;
+	if (ring->flush(ring, invalidate, 0)) {
+		i915_gem_next_request_seqno(ring);
+		return;
+	}
+
+	/* Add a breadcrumb for the completion of the batch buffer */
+	request = kzalloc(sizeof(*request), GFP_KERNEL);
+	if (request == NULL || i915_add_request(ring, file, request)) {
+		i915_gem_next_request_seqno(ring);
+		kfree(request);
+	}
+}
+
+static int
+i915_reset_gen7_sol_offsets(struct drm_device *dev,
+			    struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret, i;
+
+	if (!IS_GEN7(dev) || ring != &dev_priv->ring[RCS])
+		return 0;
+
+	ret = intel_ring_begin(ring, 4 * 3);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < 4; i++) {
+		intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
+		intel_ring_emit(ring, GEN7_SO_WRITE_OFFSET(i));
+		intel_ring_emit(ring, 0);
+	}
+
+	intel_ring_advance(ring);
+
+	return 0;
+}
+
+static int
+i915_gem_do_execbuffer(struct drm_device *dev, void *data,
+		       struct drm_file *file,
+		       struct drm_i915_gem_execbuffer2 *args,
+		       struct drm_i915_gem_exec_object2 *exec)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct list_head objects;
+	struct eb_objects *eb;
+	struct drm_i915_gem_object *batch_obj;
+	struct drm_clip_rect *cliprects = NULL;
+	struct intel_ring_buffer *ring;
+	u32 exec_start, exec_len;
+	u32 seqno;
+	u32 mask;
+	int ret, mode, i;
+
+	if (!i915_gem_check_execbuffer(args)) {
+		DRM_DEBUG("execbuf with invalid offset/length\n");
+		return -EINVAL;
+	}
+
+	ret = validate_exec_list(exec, args->buffer_count);
+	if (ret)
+		return ret;
+
+	switch (args->flags & I915_EXEC_RING_MASK) {
+	case I915_EXEC_DEFAULT:
+	case I915_EXEC_RENDER:
+		ring = &dev_priv->ring[RCS];
+		break;
+	case I915_EXEC_BSD:
+		if (!HAS_BSD(dev)) {
+			DRM_DEBUG("execbuf with invalid ring (BSD)\n");
+			return -EINVAL;
+		}
+		ring = &dev_priv->ring[VCS];
+		break;
+	case I915_EXEC_BLT:
+		if (!HAS_BLT(dev)) {
+			DRM_DEBUG("execbuf with invalid ring (BLT)\n");
+			return -EINVAL;
+		}
+		ring = &dev_priv->ring[BCS];
+		break;
+	default:
+		DRM_DEBUG("execbuf with unknown ring: %d\n",
+			  (int)(args->flags & I915_EXEC_RING_MASK));
+		return -EINVAL;
+	}
+
+	mode = args->flags & I915_EXEC_CONSTANTS_MASK;
+	mask = I915_EXEC_CONSTANTS_MASK;
+	switch (mode) {
+	case I915_EXEC_CONSTANTS_REL_GENERAL:
+	case I915_EXEC_CONSTANTS_ABSOLUTE:
+	case I915_EXEC_CONSTANTS_REL_SURFACE:
+		if (ring == &dev_priv->ring[RCS] &&
+		    mode != dev_priv->relative_constants_mode) {
+			if (INTEL_INFO(dev)->gen < 4)
+				return -EINVAL;
+
+			if (INTEL_INFO(dev)->gen > 5 &&
+			    mode == I915_EXEC_CONSTANTS_REL_SURFACE)
+				return -EINVAL;
+
+			/* The HW changed the meaning on this bit on gen6 */
+			if (INTEL_INFO(dev)->gen >= 6)
+				mask &= ~I915_EXEC_CONSTANTS_REL_SURFACE;
+		}
+		break;
+	default:
+		DRM_DEBUG("execbuf with unknown constants: %d\n", mode);
+		return -EINVAL;
+	}
+
+	if (args->buffer_count < 1) {
+		DRM_DEBUG("execbuf with %d buffers\n", args->buffer_count);
+		return -EINVAL;
+	}
+
+	if (args->num_cliprects != 0) {
+		if (ring != &dev_priv->ring[RCS]) {
+			DRM_DEBUG("clip rectangles are only valid with the render ring\n");
+			return -EINVAL;
+		}
+
+		if (args->num_cliprects > UINT_MAX / sizeof(*cliprects)) {
+			DRM_DEBUG("execbuf with %u cliprects\n",
+				  args->num_cliprects);
+			return -EINVAL;
+		}
+		cliprects = kmalloc(args->num_cliprects * sizeof(*cliprects),
+				    GFP_KERNEL);
+		if (cliprects == NULL) {
+			ret = -ENOMEM;
+			goto pre_mutex_err;
+		}
+
+		if (copy_from_user(cliprects,
+				     (struct drm_clip_rect __user *)(uintptr_t)
+				     args->cliprects_ptr,
+				     sizeof(*cliprects)*args->num_cliprects)) {
+			ret = -EFAULT;
+			goto pre_mutex_err;
+		}
+	}
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret)
+		goto pre_mutex_err;
+
+	if (dev_priv->mm.suspended) {
+		mutex_unlock(&dev->struct_mutex);
+		ret = -EBUSY;
+		goto pre_mutex_err;
+	}
+
+	eb = eb_create(args->buffer_count);
+	if (eb == NULL) {
+		mutex_unlock(&dev->struct_mutex);
+		ret = -ENOMEM;
+		goto pre_mutex_err;
+	}
+
+	/* Look up object handles */
+	INIT_LIST_HEAD(&objects);
+	for (i = 0; i < args->buffer_count; i++) {
+		struct drm_i915_gem_object *obj;
+
+		obj = to_intel_bo(drm_gem_object_lookup(dev, file,
+							exec[i].handle));
+		if (&obj->base == NULL) {
+			DRM_DEBUG("Invalid object handle %d at index %d\n",
+				   exec[i].handle, i);
+			/* prevent error path from reading uninitialized data */
+			ret = -ENOENT;
+			goto err;
+		}
+
+		if (!list_empty(&obj->exec_list)) {
+			DRM_DEBUG("Object %p [handle %d, index %d] appears more than once in object list\n",
+				   obj, exec[i].handle, i);
+			ret = -EINVAL;
+			goto err;
+		}
+
+		list_add_tail(&obj->exec_list, &objects);
+		obj->exec_handle = exec[i].handle;
+		obj->exec_entry = &exec[i];
+		eb_add_object(eb, obj);
+	}
+
+	/* take note of the batch buffer before we might reorder the lists */
+	batch_obj = list_entry(objects.prev,
+			       struct drm_i915_gem_object,
+			       exec_list);
+
+	/* Move the objects en-masse into the GTT, evicting if necessary. */
+	ret = i915_gem_execbuffer_reserve(ring, file, &objects);
+	if (ret)
+		goto err;
+
+	/* The objects are in their final locations, apply the relocations. */
+	ret = i915_gem_execbuffer_relocate(dev, eb, &objects);
+	if (ret) {
+		if (ret == -EFAULT) {
+			ret = i915_gem_execbuffer_relocate_slow(dev, file, ring,
+								&objects, eb,
+								exec,
+								args->buffer_count);
+			BUG_ON(!mutex_is_locked(&dev->struct_mutex));
+		}
+		if (ret)
+			goto err;
+	}
+
+	/* Set the pending read domains for the batch buffer to COMMAND */
+	if (batch_obj->base.pending_write_domain) {
+		DRM_DEBUG("Attempting to use self-modifying batch buffer\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	batch_obj->base.pending_read_domains |= I915_GEM_DOMAIN_COMMAND;
+
+	ret = i915_gem_execbuffer_move_to_gpu(ring, &objects);
+	if (ret)
+		goto err;
+
+	seqno = i915_gem_next_request_seqno(ring);
+	for (i = 0; i < ARRAY_SIZE(ring->sync_seqno); i++) {
+		if (seqno < ring->sync_seqno[i]) {
+			/* The GPU can not handle its semaphore value wrapping,
+			 * so every billion or so execbuffers, we need to stall
+			 * the GPU in order to reset the counters.
+			 */
+			ret = i915_gpu_idle(dev, true);
+			if (ret)
+				goto err;
+
+			BUG_ON(ring->sync_seqno[i]);
+		}
+	}
+
+	if (ring == &dev_priv->ring[RCS] &&
+	    mode != dev_priv->relative_constants_mode) {
+		ret = intel_ring_begin(ring, 4);
+		if (ret)
+				goto err;
+
+		intel_ring_emit(ring, MI_NOOP);
+		intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
+		intel_ring_emit(ring, INSTPM);
+		intel_ring_emit(ring, mask << 16 | mode);
+		intel_ring_advance(ring);
+
+		dev_priv->relative_constants_mode = mode;
+	}
+
+	if (args->flags & I915_EXEC_GEN7_SOL_RESET) {
+		ret = i915_reset_gen7_sol_offsets(dev, ring);
+		if (ret)
+			goto err;
+	}
+
+	trace_i915_gem_ring_dispatch(ring, seqno);
+
+	exec_start = batch_obj->gtt_offset + args->batch_start_offset;
+	exec_len = args->batch_len;
+	if (cliprects) {
+		for (i = 0; i < args->num_cliprects; i++) {
+			ret = i915_emit_box(dev, &cliprects[i],
+					    args->DR1, args->DR4);
+			if (ret)
+				goto err;
+
+			ret = ring->dispatch_execbuffer(ring,
+							exec_start, exec_len);
+			if (ret)
+				goto err;
+		}
+	} else {
+		ret = ring->dispatch_execbuffer(ring, exec_start, exec_len);
+		if (ret)
+			goto err;
+	}
+
+	i915_gem_execbuffer_move_to_active(&objects, ring, seqno);
+	i915_gem_execbuffer_retire_commands(dev, file, ring);
+
+err:
+	eb_destroy(eb);
+	while (!list_empty(&objects)) {
+		struct drm_i915_gem_object *obj;
+
+		obj = list_first_entry(&objects,
+				       struct drm_i915_gem_object,
+				       exec_list);
+		list_del_init(&obj->exec_list);
+		drm_gem_object_unreference(&obj->base);
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+pre_mutex_err:
+	kfree(cliprects);
+	return ret;
+}
+
+/*
+ * Legacy execbuffer just creates an exec2 list from the original exec object
+ * list array and passes it to the real function.
+ */
+int
+i915_gem_execbuffer(struct drm_device *dev, void *data,
+		    struct drm_file *file)
+{
+	struct drm_i915_gem_execbuffer *args = data;
+	struct drm_i915_gem_execbuffer2 exec2;
+	struct drm_i915_gem_exec_object *exec_list = NULL;
+	struct drm_i915_gem_exec_object2 *exec2_list = NULL;
+	int ret, i;
+
+	if (args->buffer_count < 1) {
+		DRM_DEBUG("execbuf with %d buffers\n", args->buffer_count);
+		return -EINVAL;
+	}
+
+	/* Copy in the exec list from userland */
+	exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count);
+	exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count);
+	if (exec_list == NULL || exec2_list == NULL) {
+		DRM_DEBUG("Failed to allocate exec list for %d buffers\n",
+			  args->buffer_count);
+		drm_free_large(exec_list);
+		drm_free_large(exec2_list);
+		return -ENOMEM;
+	}
+	ret = copy_from_user(exec_list,
+			     (struct drm_i915_relocation_entry __user *)
+			     (uintptr_t) args->buffers_ptr,
+			     sizeof(*exec_list) * args->buffer_count);
+	if (ret != 0) {
+		DRM_DEBUG("copy %d exec entries failed %d\n",
+			  args->buffer_count, ret);
+		drm_free_large(exec_list);
+		drm_free_large(exec2_list);
+		return -EFAULT;
+	}
+
+	for (i = 0; i < args->buffer_count; i++) {
+		exec2_list[i].handle = exec_list[i].handle;
+		exec2_list[i].relocation_count = exec_list[i].relocation_count;
+		exec2_list[i].relocs_ptr = exec_list[i].relocs_ptr;
+		exec2_list[i].alignment = exec_list[i].alignment;
+		exec2_list[i].offset = exec_list[i].offset;
+		if (INTEL_INFO(dev)->gen < 4)
+			exec2_list[i].flags = EXEC_OBJECT_NEEDS_FENCE;
+		else
+			exec2_list[i].flags = 0;
+	}
+
+	exec2.buffers_ptr = args->buffers_ptr;
+	exec2.buffer_count = args->buffer_count;
+	exec2.batch_start_offset = args->batch_start_offset;
+	exec2.batch_len = args->batch_len;
+	exec2.DR1 = args->DR1;
+	exec2.DR4 = args->DR4;
+	exec2.num_cliprects = args->num_cliprects;
+	exec2.cliprects_ptr = args->cliprects_ptr;
+	exec2.flags = I915_EXEC_RENDER;
+
+	ret = i915_gem_do_execbuffer(dev, data, file, &exec2, exec2_list);
+	if (!ret) {
+		/* Copy the new buffer offsets back to the user's exec list. */
+		for (i = 0; i < args->buffer_count; i++)
+			exec_list[i].offset = exec2_list[i].offset;
+		/* ... and back out to userspace */
+		ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+				   (uintptr_t) args->buffers_ptr,
+				   exec_list,
+				   sizeof(*exec_list) * args->buffer_count);
+		if (ret) {
+			ret = -EFAULT;
+			DRM_DEBUG("failed to copy %d exec entries "
+				  "back to user (%d)\n",
+				  args->buffer_count, ret);
+		}
+	}
+
+	drm_free_large(exec_list);
+	drm_free_large(exec2_list);
+	return ret;
+}
+
+int
+i915_gem_execbuffer2(struct drm_device *dev, void *data,
+		     struct drm_file *file)
+{
+	struct drm_i915_gem_execbuffer2 *args = data;
+	struct drm_i915_gem_exec_object2 *exec2_list = NULL;
+	int ret;
+
+	if (args->buffer_count < 1 ||
+	    args->buffer_count > UINT_MAX / sizeof(*exec2_list)) {
+		DRM_DEBUG("execbuf2 with %d buffers\n", args->buffer_count);
+		return -EINVAL;
+	}
+
+	exec2_list = kmalloc(sizeof(*exec2_list)*args->buffer_count,
+			     GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY);
+	if (exec2_list == NULL)
+		exec2_list = drm_malloc_ab(sizeof(*exec2_list),
+					   args->buffer_count);
+	if (exec2_list == NULL) {
+		DRM_DEBUG("Failed to allocate exec list for %d buffers\n",
+			  args->buffer_count);
+		return -ENOMEM;
+	}
+	ret = copy_from_user(exec2_list,
+			     (struct drm_i915_relocation_entry __user *)
+			     (uintptr_t) args->buffers_ptr,
+			     sizeof(*exec2_list) * args->buffer_count);
+	if (ret != 0) {
+		DRM_DEBUG("copy %d exec entries failed %d\n",
+			  args->buffer_count, ret);
+		drm_free_large(exec2_list);
+		return -EFAULT;
+	}
+
+	ret = i915_gem_do_execbuffer(dev, data, file, args, exec2_list);
+	if (!ret) {
+		/* Copy the new buffer offsets back to the user's exec list. */
+		ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+				   (uintptr_t) args->buffers_ptr,
+				   exec2_list,
+				   sizeof(*exec2_list) * args->buffer_count);
+		if (ret) {
+			ret = -EFAULT;
+			DRM_DEBUG("failed to copy %d exec entries "
+				  "back to user (%d)\n",
+				  args->buffer_count, ret);
+		}
+	}
+
+	drm_free_large(exec2_list);
+	return ret;
+}
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
new file mode 100644
index 00000000..a135c61f
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -0,0 +1,421 @@
+/*
+ * Copyright © 2010 Daniel Vetter
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "i915_trace.h"
+#include "intel_drv.h"
+
+/* PPGTT support for Sandybdrige/Gen6 and later */
+static void i915_ppgtt_clear_range(struct i915_hw_ppgtt *ppgtt,
+				   unsigned first_entry,
+				   unsigned num_entries)
+{
+	uint32_t *pt_vaddr;
+	uint32_t scratch_pte;
+	unsigned act_pd = first_entry / I915_PPGTT_PT_ENTRIES;
+	unsigned first_pte = first_entry % I915_PPGTT_PT_ENTRIES;
+	unsigned last_pte, i;
+
+	scratch_pte = GEN6_PTE_ADDR_ENCODE(ppgtt->scratch_page_dma_addr);
+	scratch_pte |= GEN6_PTE_VALID | GEN6_PTE_CACHE_LLC;
+
+	while (num_entries) {
+		last_pte = first_pte + num_entries;
+		if (last_pte > I915_PPGTT_PT_ENTRIES)
+			last_pte = I915_PPGTT_PT_ENTRIES;
+
+		pt_vaddr = kmap_atomic(ppgtt->pt_pages[act_pd]);
+
+		for (i = first_pte; i < last_pte; i++)
+			pt_vaddr[i] = scratch_pte;
+
+		kunmap_atomic(pt_vaddr);
+
+		num_entries -= last_pte - first_pte;
+		first_pte = 0;
+		act_pd++;
+	}
+}
+
+int i915_gem_init_aliasing_ppgtt(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct i915_hw_ppgtt *ppgtt;
+	unsigned first_pd_entry_in_global_pt;
+	int i;
+	int ret = -ENOMEM;
+
+	/* ppgtt PDEs reside in the global gtt pagetable, which has 512*1024
+	 * entries. For aliasing ppgtt support we just steal them at the end for
+	 * now. */
+	first_pd_entry_in_global_pt = 512*1024 - I915_PPGTT_PD_ENTRIES;
+
+	ppgtt = kzalloc(sizeof(*ppgtt), GFP_KERNEL);
+	if (!ppgtt)
+		return ret;
+
+	ppgtt->num_pd_entries = I915_PPGTT_PD_ENTRIES;
+	ppgtt->pt_pages = kzalloc(sizeof(struct page *)*ppgtt->num_pd_entries,
+				  GFP_KERNEL);
+	if (!ppgtt->pt_pages)
+		goto err_ppgtt;
+
+	for (i = 0; i < ppgtt->num_pd_entries; i++) {
+		ppgtt->pt_pages[i] = alloc_page(GFP_KERNEL);
+		if (!ppgtt->pt_pages[i])
+			goto err_pt_alloc;
+	}
+
+	if (dev_priv->mm.gtt->needs_dmar) {
+		ppgtt->pt_dma_addr = kzalloc(sizeof(dma_addr_t)
+						*ppgtt->num_pd_entries,
+					     GFP_KERNEL);
+		if (!ppgtt->pt_dma_addr)
+			goto err_pt_alloc;
+	}
+
+	for (i = 0; i < ppgtt->num_pd_entries; i++) {
+		dma_addr_t pt_addr;
+		if (dev_priv->mm.gtt->needs_dmar) {
+			pt_addr = pci_map_page(dev->pdev, ppgtt->pt_pages[i],
+					       0, 4096,
+					       PCI_DMA_BIDIRECTIONAL);
+
+			if (pci_dma_mapping_error(dev->pdev,
+						  pt_addr)) {
+				ret = -EIO;
+				goto err_pd_pin;
+
+			}
+			ppgtt->pt_dma_addr[i] = pt_addr;
+		} else
+			pt_addr = page_to_phys(ppgtt->pt_pages[i]);
+	}
+
+	ppgtt->scratch_page_dma_addr = dev_priv->mm.gtt->scratch_page_dma;
+
+	i915_ppgtt_clear_range(ppgtt, 0,
+			       ppgtt->num_pd_entries*I915_PPGTT_PT_ENTRIES);
+
+	ppgtt->pd_offset = (first_pd_entry_in_global_pt)*sizeof(uint32_t);
+
+	dev_priv->mm.aliasing_ppgtt = ppgtt;
+
+	return 0;
+
+err_pd_pin:
+	if (ppgtt->pt_dma_addr) {
+		for (i--; i >= 0; i--)
+			pci_unmap_page(dev->pdev, ppgtt->pt_dma_addr[i],
+				       4096, PCI_DMA_BIDIRECTIONAL);
+	}
+err_pt_alloc:
+	kfree(ppgtt->pt_dma_addr);
+	for (i = 0; i < ppgtt->num_pd_entries; i++) {
+		if (ppgtt->pt_pages[i])
+			__free_page(ppgtt->pt_pages[i]);
+	}
+	kfree(ppgtt->pt_pages);
+err_ppgtt:
+	kfree(ppgtt);
+
+	return ret;
+}
+
+void i915_gem_cleanup_aliasing_ppgtt(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct i915_hw_ppgtt *ppgtt = dev_priv->mm.aliasing_ppgtt;
+	int i;
+
+	if (!ppgtt)
+		return;
+
+	if (ppgtt->pt_dma_addr) {
+		for (i = 0; i < ppgtt->num_pd_entries; i++)
+			pci_unmap_page(dev->pdev, ppgtt->pt_dma_addr[i],
+				       4096, PCI_DMA_BIDIRECTIONAL);
+	}
+
+	kfree(ppgtt->pt_dma_addr);
+	for (i = 0; i < ppgtt->num_pd_entries; i++)
+		__free_page(ppgtt->pt_pages[i]);
+	kfree(ppgtt->pt_pages);
+	kfree(ppgtt);
+}
+
+static void i915_ppgtt_insert_sg_entries(struct i915_hw_ppgtt *ppgtt,
+					 struct scatterlist *sg_list,
+					 unsigned sg_len,
+					 unsigned first_entry,
+					 uint32_t pte_flags)
+{
+	uint32_t *pt_vaddr, pte;
+	unsigned act_pd = first_entry / I915_PPGTT_PT_ENTRIES;
+	unsigned first_pte = first_entry % I915_PPGTT_PT_ENTRIES;
+	unsigned i, j, m, segment_len;
+	dma_addr_t page_addr;
+	struct scatterlist *sg;
+
+	/* init sg walking */
+	sg = sg_list;
+	i = 0;
+	segment_len = sg_dma_len(sg) >> PAGE_SHIFT;
+	m = 0;
+
+	while (i < sg_len) {
+		pt_vaddr = kmap_atomic(ppgtt->pt_pages[act_pd]);
+
+		for (j = first_pte; j < I915_PPGTT_PT_ENTRIES; j++) {
+			page_addr = sg_dma_address(sg) + (m << PAGE_SHIFT);
+			pte = GEN6_PTE_ADDR_ENCODE(page_addr);
+			pt_vaddr[j] = pte | pte_flags;
+
+			/* grab the next page */
+			m++;
+			if (m == segment_len) {
+				sg = sg_next(sg);
+				i++;
+				if (i == sg_len)
+					break;
+
+				segment_len = sg_dma_len(sg) >> PAGE_SHIFT;
+				m = 0;
+			}
+		}
+
+		kunmap_atomic(pt_vaddr);
+
+		first_pte = 0;
+		act_pd++;
+	}
+}
+
+static void i915_ppgtt_insert_pages(struct i915_hw_ppgtt *ppgtt,
+				    unsigned first_entry, unsigned num_entries,
+				    struct page **pages, uint32_t pte_flags)
+{
+	uint32_t *pt_vaddr, pte;
+	unsigned act_pd = first_entry / I915_PPGTT_PT_ENTRIES;
+	unsigned first_pte = first_entry % I915_PPGTT_PT_ENTRIES;
+	unsigned last_pte, i;
+	dma_addr_t page_addr;
+
+	while (num_entries) {
+		last_pte = first_pte + num_entries;
+		last_pte = min_t(unsigned, last_pte, I915_PPGTT_PT_ENTRIES);
+
+		pt_vaddr = kmap_atomic(ppgtt->pt_pages[act_pd]);
+
+		for (i = first_pte; i < last_pte; i++) {
+			page_addr = page_to_phys(*pages);
+			pte = GEN6_PTE_ADDR_ENCODE(page_addr);
+			pt_vaddr[i] = pte | pte_flags;
+
+			pages++;
+		}
+
+		kunmap_atomic(pt_vaddr);
+
+		num_entries -= last_pte - first_pte;
+		first_pte = 0;
+		act_pd++;
+	}
+}
+
+void i915_ppgtt_bind_object(struct i915_hw_ppgtt *ppgtt,
+			    struct drm_i915_gem_object *obj,
+			    enum i915_cache_level cache_level)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t pte_flags = GEN6_PTE_VALID;
+
+	switch (cache_level) {
+	case I915_CACHE_LLC_MLC:
+		pte_flags |= GEN6_PTE_CACHE_LLC_MLC;
+		break;
+	case I915_CACHE_LLC:
+		pte_flags |= GEN6_PTE_CACHE_LLC;
+		break;
+	case I915_CACHE_NONE:
+		pte_flags |= GEN6_PTE_UNCACHED;
+		break;
+	default:
+		BUG();
+	}
+
+	if (dev_priv->mm.gtt->needs_dmar) {
+		BUG_ON(!obj->sg_list);
+
+		i915_ppgtt_insert_sg_entries(ppgtt,
+					     obj->sg_list,
+					     obj->num_sg,
+					     obj->gtt_space->start >> PAGE_SHIFT,
+					     pte_flags);
+	} else
+		i915_ppgtt_insert_pages(ppgtt,
+					obj->gtt_space->start >> PAGE_SHIFT,
+					obj->base.size >> PAGE_SHIFT,
+					obj->pages,
+					pte_flags);
+}
+
+void i915_ppgtt_unbind_object(struct i915_hw_ppgtt *ppgtt,
+			      struct drm_i915_gem_object *obj)
+{
+	i915_ppgtt_clear_range(ppgtt,
+			       obj->gtt_space->start >> PAGE_SHIFT,
+			       obj->base.size >> PAGE_SHIFT);
+}
+
+/* XXX kill agp_type! */
+static unsigned int cache_level_to_agp_type(struct drm_device *dev,
+					    enum i915_cache_level cache_level)
+{
+	switch (cache_level) {
+	case I915_CACHE_LLC_MLC:
+		if (INTEL_INFO(dev)->gen >= 6)
+			return AGP_USER_CACHED_MEMORY_LLC_MLC;
+		/* Older chipsets do not have this extra level of CPU
+		 * cacheing, so fallthrough and request the PTE simply
+		 * as cached.
+		 */
+	case I915_CACHE_LLC:
+		return AGP_USER_CACHED_MEMORY;
+	default:
+	case I915_CACHE_NONE:
+		return AGP_USER_MEMORY;
+	}
+}
+
+static bool do_idling(struct drm_i915_private *dev_priv)
+{
+	bool ret = dev_priv->mm.interruptible;
+
+	if (unlikely(dev_priv->mm.gtt->do_idle_maps)) {
+		dev_priv->mm.interruptible = false;
+		if (i915_gpu_idle(dev_priv->dev, false)) {
+			DRM_ERROR("Couldn't idle GPU\n");
+			/* Wait a bit, in hopes it avoids the hang */
+			udelay(10);
+		}
+	}
+
+	return ret;
+}
+
+static void undo_idling(struct drm_i915_private *dev_priv, bool interruptible)
+{
+	if (unlikely(dev_priv->mm.gtt->do_idle_maps))
+		dev_priv->mm.interruptible = interruptible;
+}
+
+void i915_gem_restore_gtt_mappings(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+
+	/* First fill our portion of the GTT with scratch pages */
+	intel_gtt_clear_range(dev_priv->mm.gtt_start / PAGE_SIZE,
+			      (dev_priv->mm.gtt_end - dev_priv->mm.gtt_start) / PAGE_SIZE);
+
+	list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) {
+		i915_gem_clflush_object(obj);
+		i915_gem_gtt_rebind_object(obj, obj->cache_level);
+	}
+
+	intel_gtt_chipset_flush();
+}
+
+int i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned int agp_type = cache_level_to_agp_type(dev, obj->cache_level);
+	int ret;
+
+	if (dev_priv->mm.gtt->needs_dmar) {
+		ret = intel_gtt_map_memory(obj->pages,
+					   obj->base.size >> PAGE_SHIFT,
+					   &obj->sg_list,
+					   &obj->num_sg);
+		if (ret != 0)
+			return ret;
+
+		intel_gtt_insert_sg_entries(obj->sg_list,
+					    obj->num_sg,
+					    obj->gtt_space->start >> PAGE_SHIFT,
+					    agp_type);
+	} else
+		intel_gtt_insert_pages(obj->gtt_space->start >> PAGE_SHIFT,
+				       obj->base.size >> PAGE_SHIFT,
+				       obj->pages,
+				       agp_type);
+
+	return 0;
+}
+
+void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj,
+				enum i915_cache_level cache_level)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned int agp_type = cache_level_to_agp_type(dev, cache_level);
+
+	if (dev_priv->mm.gtt->needs_dmar) {
+		BUG_ON(!obj->sg_list);
+
+		intel_gtt_insert_sg_entries(obj->sg_list,
+					    obj->num_sg,
+					    obj->gtt_space->start >> PAGE_SHIFT,
+					    agp_type);
+	} else
+		intel_gtt_insert_pages(obj->gtt_space->start >> PAGE_SHIFT,
+				       obj->base.size >> PAGE_SHIFT,
+				       obj->pages,
+				       agp_type);
+}
+
+void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	bool interruptible;
+
+	interruptible = do_idling(dev_priv);
+
+	intel_gtt_clear_range(obj->gtt_space->start >> PAGE_SHIFT,
+			      obj->base.size >> PAGE_SHIFT);
+
+	if (obj->sg_list) {
+		intel_gtt_unmap_memory(obj->sg_list, obj->num_sg);
+		obj->sg_list = NULL;
+	}
+
+	undo_idling(dev_priv, interruptible);
+}
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
new file mode 100644
index 00000000..1a930666
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -0,0 +1,499 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#include "linux/string.h"
+#include "linux/bitops.h"
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+/** @file i915_gem_tiling.c
+ *
+ * Support for managing tiling state of buffer objects.
+ *
+ * The idea behind tiling is to increase cache hit rates by rearranging
+ * pixel data so that a group of pixel accesses are in the same cacheline.
+ * Performance improvement from doing this on the back/depth buffer are on
+ * the order of 30%.
+ *
+ * Intel architectures make this somewhat more complicated, though, by
+ * adjustments made to addressing of data when the memory is in interleaved
+ * mode (matched pairs of DIMMS) to improve memory bandwidth.
+ * For interleaved memory, the CPU sends every sequential 64 bytes
+ * to an alternate memory channel so it can get the bandwidth from both.
+ *
+ * The GPU also rearranges its accesses for increased bandwidth to interleaved
+ * memory, and it matches what the CPU does for non-tiled.  However, when tiled
+ * it does it a little differently, since one walks addresses not just in the
+ * X direction but also Y.  So, along with alternating channels when bit
+ * 6 of the address flips, it also alternates when other bits flip --  Bits 9
+ * (every 512 bytes, an X tile scanline) and 10 (every two X tile scanlines)
+ * are common to both the 915 and 965-class hardware.
+ *
+ * The CPU also sometimes XORs in higher bits as well, to improve
+ * bandwidth doing strided access like we do so frequently in graphics.  This
+ * is called "Channel XOR Randomization" in the MCH documentation.  The result
+ * is that the CPU is XORing in either bit 11 or bit 17 to bit 6 of its address
+ * decode.
+ *
+ * All of this bit 6 XORing has an effect on our memory management,
+ * as we need to make sure that the 3d driver can correctly address object
+ * contents.
+ *
+ * If we don't have interleaved memory, all tiling is safe and no swizzling is
+ * required.
+ *
+ * When bit 17 is XORed in, we simply refuse to tile at all.  Bit
+ * 17 is not just a page offset, so as we page an objet out and back in,
+ * individual pages in it will have different bit 17 addresses, resulting in
+ * each 64 bytes being swapped with its neighbor!
+ *
+ * Otherwise, if interleaved, we have to tell the 3d driver what the address
+ * swizzling it needs to do is, since it's writing with the CPU to the pages
+ * (bit 6 and potentially bit 11 XORed in), and the GPU is reading from the
+ * pages (bit 6, 9, and 10 XORed in), resulting in a cumulative bit swizzling
+ * required by the CPU of XORing in bit 6, 9, 10, and potentially 11, in order
+ * to match what the GPU expects.
+ */
+
+/**
+ * Detects bit 6 swizzling of address lookup between IGD access and CPU
+ * access through main memory.
+ */
+void
+i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
+	uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+
+	if (INTEL_INFO(dev)->gen >= 6) {
+		uint32_t dimm_c0, dimm_c1;
+		dimm_c0 = I915_READ(MAD_DIMM_C0);
+		dimm_c1 = I915_READ(MAD_DIMM_C1);
+		dimm_c0 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
+		dimm_c1 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK;
+		/* Enable swizzling when the channels are populated with
+		 * identically sized dimms. We don't need to check the 3rd
+		 * channel because no cpu with gpu attached ships in that
+		 * configuration. Also, swizzling only makes sense for 2
+		 * channels anyway. */
+		if (dimm_c0 == dimm_c1) {
+			swizzle_x = I915_BIT_6_SWIZZLE_9_10;
+			swizzle_y = I915_BIT_6_SWIZZLE_9;
+		} else {
+			swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+			swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+		}
+	} else if (IS_GEN5(dev)) {
+		/* On Ironlake whatever DRAM config, GPU always do
+		 * same swizzling setup.
+		 */
+		swizzle_x = I915_BIT_6_SWIZZLE_9_10;
+		swizzle_y = I915_BIT_6_SWIZZLE_9;
+	} else if (IS_GEN2(dev)) {
+		/* As far as we know, the 865 doesn't have these bit 6
+		 * swizzling issues.
+		 */
+		swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+		swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+	} else if (IS_MOBILE(dev) || (IS_GEN3(dev) && !IS_G33(dev))) {
+		uint32_t dcc;
+
+		/* On 9xx chipsets, channel interleave by the CPU is
+		 * determined by DCC.  For single-channel, neither the CPU
+		 * nor the GPU do swizzling.  For dual channel interleaved,
+		 * the GPU's interleave is bit 9 and 10 for X tiled, and bit
+		 * 9 for Y tiled.  The CPU's interleave is independent, and
+		 * can be based on either bit 11 (haven't seen this yet) or
+		 * bit 17 (common).
+		 */
+		dcc = I915_READ(DCC);
+		switch (dcc & DCC_ADDRESSING_MODE_MASK) {
+		case DCC_ADDRESSING_MODE_SINGLE_CHANNEL:
+		case DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC:
+			swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+			swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+			break;
+		case DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED:
+			if (dcc & DCC_CHANNEL_XOR_DISABLE) {
+				/* This is the base swizzling by the GPU for
+				 * tiled buffers.
+				 */
+				swizzle_x = I915_BIT_6_SWIZZLE_9_10;
+				swizzle_y = I915_BIT_6_SWIZZLE_9;
+			} else if ((dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
+				/* Bit 11 swizzling by the CPU in addition. */
+				swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
+				swizzle_y = I915_BIT_6_SWIZZLE_9_11;
+			} else {
+				/* Bit 17 swizzling by the CPU in addition. */
+				swizzle_x = I915_BIT_6_SWIZZLE_9_10_17;
+				swizzle_y = I915_BIT_6_SWIZZLE_9_17;
+			}
+			break;
+		}
+		if (dcc == 0xffffffff) {
+			DRM_ERROR("Couldn't read from MCHBAR.  "
+				  "Disabling tiling.\n");
+			swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
+			swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+		}
+	} else {
+		/* The 965, G33, and newer, have a very flexible memory
+		 * configuration.  It will enable dual-channel mode
+		 * (interleaving) on as much memory as it can, and the GPU
+		 * will additionally sometimes enable different bit 6
+		 * swizzling for tiled objects from the CPU.
+		 *
+		 * Here's what I found on the G965:
+		 *    slot fill         memory size  swizzling
+		 * 0A   0B   1A   1B    1-ch   2-ch
+		 * 512  0    0    0     512    0     O
+		 * 512  0    512  0     16     1008  X
+		 * 512  0    0    512   16     1008  X
+		 * 0    512  0    512   16     1008  X
+		 * 1024 1024 1024 0     2048   1024  O
+		 *
+		 * We could probably detect this based on either the DRB
+		 * matching, which was the case for the swizzling required in
+		 * the table above, or from the 1-ch value being less than
+		 * the minimum size of a rank.
+		 */
+		if (I915_READ16(C0DRB3) != I915_READ16(C1DRB3)) {
+			swizzle_x = I915_BIT_6_SWIZZLE_NONE;
+			swizzle_y = I915_BIT_6_SWIZZLE_NONE;
+		} else {
+			swizzle_x = I915_BIT_6_SWIZZLE_9_10;
+			swizzle_y = I915_BIT_6_SWIZZLE_9;
+		}
+	}
+
+	dev_priv->mm.bit_6_swizzle_x = swizzle_x;
+	dev_priv->mm.bit_6_swizzle_y = swizzle_y;
+}
+
+/* Check pitch constriants for all chips & tiling formats */
+static bool
+i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
+{
+	int tile_width;
+
+	/* Linear is always fine */
+	if (tiling_mode == I915_TILING_NONE)
+		return true;
+
+	if (IS_GEN2(dev) ||
+	    (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
+		tile_width = 128;
+	else
+		tile_width = 512;
+
+	/* check maximum stride & object size */
+	if (INTEL_INFO(dev)->gen >= 4) {
+		/* i965 stores the end address of the gtt mapping in the fence
+		 * reg, so dont bother to check the size */
+		if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
+			return false;
+	} else {
+		if (stride > 8192)
+			return false;
+
+		if (IS_GEN3(dev)) {
+			if (size > I830_FENCE_MAX_SIZE_VAL << 20)
+				return false;
+		} else {
+			if (size > I830_FENCE_MAX_SIZE_VAL << 19)
+				return false;
+		}
+	}
+
+	/* 965+ just needs multiples of tile width */
+	if (INTEL_INFO(dev)->gen >= 4) {
+		if (stride & (tile_width - 1))
+			return false;
+		return true;
+	}
+
+	/* Pre-965 needs power of two tile widths */
+	if (stride < tile_width)
+		return false;
+
+	if (stride & (stride - 1))
+		return false;
+
+	return true;
+}
+
+/* Is the current GTT allocation valid for the change in tiling? */
+static bool
+i915_gem_object_fence_ok(struct drm_i915_gem_object *obj, int tiling_mode)
+{
+	u32 size;
+
+	if (tiling_mode == I915_TILING_NONE)
+		return true;
+
+	if (INTEL_INFO(obj->base.dev)->gen >= 4)
+		return true;
+
+	if (INTEL_INFO(obj->base.dev)->gen == 3) {
+		if (obj->gtt_offset & ~I915_FENCE_START_MASK)
+			return false;
+	} else {
+		if (obj->gtt_offset & ~I830_FENCE_START_MASK)
+			return false;
+	}
+
+	/*
+	 * Previous chips need to be aligned to the size of the smallest
+	 * fence register that can contain the object.
+	 */
+	if (INTEL_INFO(obj->base.dev)->gen == 3)
+		size = 1024*1024;
+	else
+		size = 512*1024;
+
+	while (size < obj->base.size)
+		size <<= 1;
+
+	if (obj->gtt_space->size != size)
+		return false;
+
+	if (obj->gtt_offset & (size - 1))
+		return false;
+
+	return true;
+}
+
+/**
+ * Sets the tiling mode of an object, returning the required swizzling of
+ * bit 6 of addresses in the object.
+ */
+int
+i915_gem_set_tiling(struct drm_device *dev, void *data,
+		   struct drm_file *file)
+{
+	struct drm_i915_gem_set_tiling *args = data;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	int ret = 0;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
+	if (&obj->base == NULL)
+		return -ENOENT;
+
+	if (!i915_tiling_ok(dev,
+			    args->stride, obj->base.size, args->tiling_mode)) {
+		drm_gem_object_unreference_unlocked(&obj->base);
+		return -EINVAL;
+	}
+
+	if (obj->pin_count) {
+		drm_gem_object_unreference_unlocked(&obj->base);
+		return -EBUSY;
+	}
+
+	if (args->tiling_mode == I915_TILING_NONE) {
+		args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
+		args->stride = 0;
+	} else {
+		if (args->tiling_mode == I915_TILING_X)
+			args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
+		else
+			args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
+
+		/* Hide bit 17 swizzling from the user.  This prevents old Mesa
+		 * from aborting the application on sw fallbacks to bit 17,
+		 * and we use the pread/pwrite bit17 paths to swizzle for it.
+		 * If there was a user that was relying on the swizzle
+		 * information for drm_intel_bo_map()ed reads/writes this would
+		 * break it, but we don't have any of those.
+		 */
+		if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
+			args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
+		if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
+			args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
+
+		/* If we can't handle the swizzling, make it untiled. */
+		if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) {
+			args->tiling_mode = I915_TILING_NONE;
+			args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
+			args->stride = 0;
+		}
+	}
+
+	mutex_lock(&dev->struct_mutex);
+	if (args->tiling_mode != obj->tiling_mode ||
+	    args->stride != obj->stride) {
+		/* We need to rebind the object if its current allocation
+		 * no longer meets the alignment restrictions for its new
+		 * tiling mode. Otherwise we can just leave it alone, but
+		 * need to ensure that any fence register is cleared.
+		 */
+		i915_gem_release_mmap(obj);
+
+		obj->map_and_fenceable =
+			obj->gtt_space == NULL ||
+			(obj->gtt_offset + obj->base.size <= dev_priv->mm.gtt_mappable_end &&
+			 i915_gem_object_fence_ok(obj, args->tiling_mode));
+
+		/* Rebind if we need a change of alignment */
+		if (!obj->map_and_fenceable) {
+			u32 unfenced_alignment =
+				i915_gem_get_unfenced_gtt_alignment(dev,
+								    obj->base.size,
+								    args->tiling_mode);
+			if (obj->gtt_offset & (unfenced_alignment - 1))
+				ret = i915_gem_object_unbind(obj);
+		}
+
+		if (ret == 0) {
+			obj->tiling_changed = true;
+			obj->tiling_mode = args->tiling_mode;
+			obj->stride = args->stride;
+		}
+	}
+	/* we have to maintain this existing ABI... */
+	args->stride = obj->stride;
+	args->tiling_mode = obj->tiling_mode;
+	drm_gem_object_unreference(&obj->base);
+	mutex_unlock(&dev->struct_mutex);
+
+	return ret;
+}
+
+/**
+ * Returns the current tiling mode and required bit 6 swizzling for the object.
+ */
+int
+i915_gem_get_tiling(struct drm_device *dev, void *data,
+		   struct drm_file *file)
+{
+	struct drm_i915_gem_get_tiling *args = data;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
+	if (&obj->base == NULL)
+		return -ENOENT;
+
+	mutex_lock(&dev->struct_mutex);
+
+	args->tiling_mode = obj->tiling_mode;
+	switch (obj->tiling_mode) {
+	case I915_TILING_X:
+		args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
+		break;
+	case I915_TILING_Y:
+		args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
+		break;
+	case I915_TILING_NONE:
+		args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
+		break;
+	default:
+		DRM_ERROR("unknown tiling mode\n");
+	}
+
+	/* Hide bit 17 from the user -- see comment in i915_gem_set_tiling */
+	if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
+		args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
+	if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
+		args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
+
+	drm_gem_object_unreference(&obj->base);
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+/**
+ * Swap every 64 bytes of this page around, to account for it having a new
+ * bit 17 of its physical address and therefore being interpreted differently
+ * by the GPU.
+ */
+static void
+i915_gem_swizzle_page(struct page *page)
+{
+	char temp[64];
+	char *vaddr;
+	int i;
+
+	vaddr = kmap(page);
+
+	for (i = 0; i < PAGE_SIZE; i += 128) {
+		memcpy(temp, &vaddr[i], 64);
+		memcpy(&vaddr[i], &vaddr[i + 64], 64);
+		memcpy(&vaddr[i + 64], temp, 64);
+	}
+
+	kunmap(page);
+}
+
+void
+i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj)
+{
+	int page_count = obj->base.size >> PAGE_SHIFT;
+	int i;
+
+	if (obj->bit_17 == NULL)
+		return;
+
+	for (i = 0; i < page_count; i++) {
+		char new_bit_17 = page_to_phys(obj->pages[i]) >> 17;
+		if ((new_bit_17 & 0x1) !=
+		    (test_bit(i, obj->bit_17) != 0)) {
+			i915_gem_swizzle_page(obj->pages[i]);
+			set_page_dirty(obj->pages[i]);
+		}
+	}
+}
+
+void
+i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj)
+{
+	int page_count = obj->base.size >> PAGE_SHIFT;
+	int i;
+
+	if (obj->bit_17 == NULL) {
+		obj->bit_17 = kmalloc(BITS_TO_LONGS(page_count) *
+					   sizeof(long), GFP_KERNEL);
+		if (obj->bit_17 == NULL) {
+			DRM_ERROR("Failed to allocate memory for bit 17 "
+				  "record\n");
+			return;
+		}
+	}
+
+	for (i = 0; i < page_count; i++) {
+		if (page_to_phys(obj->pages[i]) & (1 << 17))
+			__set_bit(i, obj->bit_17);
+		else
+			__clear_bit(i, obj->bit_17);
+	}
+}
diff --git a/drivers/gpu/drm/i915/i915_ioc32.c b/drivers/gpu/drm/i915/i915_ioc32.c
new file mode 100644
index 00000000..13b02899
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_ioc32.c
@@ -0,0 +1,219 @@
+/**
+ * \file i915_ioc32.c
+ *
+ * 32-bit ioctl compatibility routines for the i915 DRM.
+ *
+ * \author Alan Hourihane <alanh@fairlite.demon.co.uk>
+ *
+ *
+ * Copyright (C) Paul Mackerras 2005
+ * Copyright (C) Alan Hourihane 2005
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+#include <linux/compat.h>
+
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+
+typedef struct _drm_i915_batchbuffer32 {
+	int start;		/* agp offset */
+	int used;		/* nr bytes in use */
+	int DR1;		/* hw flags for GFX_OP_DRAWRECT_INFO */
+	int DR4;		/* window origin for GFX_OP_DRAWRECT_INFO */
+	int num_cliprects;	/* mulitpass with multiple cliprects? */
+	u32 cliprects;		/* pointer to userspace cliprects */
+} drm_i915_batchbuffer32_t;
+
+static int compat_i915_batchbuffer(struct file *file, unsigned int cmd,
+				   unsigned long arg)
+{
+	drm_i915_batchbuffer32_t batchbuffer32;
+	drm_i915_batchbuffer_t __user *batchbuffer;
+
+	if (copy_from_user
+	    (&batchbuffer32, (void __user *)arg, sizeof(batchbuffer32)))
+		return -EFAULT;
+
+	batchbuffer = compat_alloc_user_space(sizeof(*batchbuffer));
+	if (!access_ok(VERIFY_WRITE, batchbuffer, sizeof(*batchbuffer))
+	    || __put_user(batchbuffer32.start, &batchbuffer->start)
+	    || __put_user(batchbuffer32.used, &batchbuffer->used)
+	    || __put_user(batchbuffer32.DR1, &batchbuffer->DR1)
+	    || __put_user(batchbuffer32.DR4, &batchbuffer->DR4)
+	    || __put_user(batchbuffer32.num_cliprects,
+			  &batchbuffer->num_cliprects)
+	    || __put_user((int __user *)(unsigned long)batchbuffer32.cliprects,
+			  &batchbuffer->cliprects))
+		return -EFAULT;
+
+	return drm_ioctl(file, DRM_IOCTL_I915_BATCHBUFFER,
+			 (unsigned long)batchbuffer);
+}
+
+typedef struct _drm_i915_cmdbuffer32 {
+	u32 buf;		/* pointer to userspace command buffer */
+	int sz;			/* nr bytes in buf */
+	int DR1;		/* hw flags for GFX_OP_DRAWRECT_INFO */
+	int DR4;		/* window origin for GFX_OP_DRAWRECT_INFO */
+	int num_cliprects;	/* mulitpass with multiple cliprects? */
+	u32 cliprects;		/* pointer to userspace cliprects */
+} drm_i915_cmdbuffer32_t;
+
+static int compat_i915_cmdbuffer(struct file *file, unsigned int cmd,
+				 unsigned long arg)
+{
+	drm_i915_cmdbuffer32_t cmdbuffer32;
+	drm_i915_cmdbuffer_t __user *cmdbuffer;
+
+	if (copy_from_user
+	    (&cmdbuffer32, (void __user *)arg, sizeof(cmdbuffer32)))
+		return -EFAULT;
+
+	cmdbuffer = compat_alloc_user_space(sizeof(*cmdbuffer));
+	if (!access_ok(VERIFY_WRITE, cmdbuffer, sizeof(*cmdbuffer))
+	    || __put_user((int __user *)(unsigned long)cmdbuffer32.buf,
+			  &cmdbuffer->buf)
+	    || __put_user(cmdbuffer32.sz, &cmdbuffer->sz)
+	    || __put_user(cmdbuffer32.DR1, &cmdbuffer->DR1)
+	    || __put_user(cmdbuffer32.DR4, &cmdbuffer->DR4)
+	    || __put_user(cmdbuffer32.num_cliprects, &cmdbuffer->num_cliprects)
+	    || __put_user((int __user *)(unsigned long)cmdbuffer32.cliprects,
+			  &cmdbuffer->cliprects))
+		return -EFAULT;
+
+	return drm_ioctl(file, DRM_IOCTL_I915_CMDBUFFER,
+			 (unsigned long)cmdbuffer);
+}
+
+typedef struct drm_i915_irq_emit32 {
+	u32 irq_seq;
+} drm_i915_irq_emit32_t;
+
+static int compat_i915_irq_emit(struct file *file, unsigned int cmd,
+				unsigned long arg)
+{
+	drm_i915_irq_emit32_t req32;
+	drm_i915_irq_emit_t __user *request;
+
+	if (copy_from_user(&req32, (void __user *)arg, sizeof(req32)))
+		return -EFAULT;
+
+	request = compat_alloc_user_space(sizeof(*request));
+	if (!access_ok(VERIFY_WRITE, request, sizeof(*request))
+	    || __put_user((int __user *)(unsigned long)req32.irq_seq,
+			  &request->irq_seq))
+		return -EFAULT;
+
+	return drm_ioctl(file, DRM_IOCTL_I915_IRQ_EMIT,
+			 (unsigned long)request);
+}
+typedef struct drm_i915_getparam32 {
+	int param;
+	u32 value;
+} drm_i915_getparam32_t;
+
+static int compat_i915_getparam(struct file *file, unsigned int cmd,
+				unsigned long arg)
+{
+	drm_i915_getparam32_t req32;
+	drm_i915_getparam_t __user *request;
+
+	if (copy_from_user(&req32, (void __user *)arg, sizeof(req32)))
+		return -EFAULT;
+
+	request = compat_alloc_user_space(sizeof(*request));
+	if (!access_ok(VERIFY_WRITE, request, sizeof(*request))
+	    || __put_user(req32.param, &request->param)
+	    || __put_user((void __user *)(unsigned long)req32.value,
+			  &request->value))
+		return -EFAULT;
+
+	return drm_ioctl(file, DRM_IOCTL_I915_GETPARAM,
+			 (unsigned long)request);
+}
+
+typedef struct drm_i915_mem_alloc32 {
+	int region;
+	int alignment;
+	int size;
+	u32 region_offset;	/* offset from start of fb or agp */
+} drm_i915_mem_alloc32_t;
+
+static int compat_i915_alloc(struct file *file, unsigned int cmd,
+			     unsigned long arg)
+{
+	drm_i915_mem_alloc32_t req32;
+	drm_i915_mem_alloc_t __user *request;
+
+	if (copy_from_user(&req32, (void __user *)arg, sizeof(req32)))
+		return -EFAULT;
+
+	request = compat_alloc_user_space(sizeof(*request));
+	if (!access_ok(VERIFY_WRITE, request, sizeof(*request))
+	    || __put_user(req32.region, &request->region)
+	    || __put_user(req32.alignment, &request->alignment)
+	    || __put_user(req32.size, &request->size)
+	    || __put_user((void __user *)(unsigned long)req32.region_offset,
+			  &request->region_offset))
+		return -EFAULT;
+
+	return drm_ioctl(file, DRM_IOCTL_I915_ALLOC,
+			 (unsigned long)request);
+}
+
+drm_ioctl_compat_t *i915_compat_ioctls[] = {
+	[DRM_I915_BATCHBUFFER] = compat_i915_batchbuffer,
+	[DRM_I915_CMDBUFFER] = compat_i915_cmdbuffer,
+	[DRM_I915_GETPARAM] = compat_i915_getparam,
+	[DRM_I915_IRQ_EMIT] = compat_i915_irq_emit,
+	[DRM_I915_ALLOC] = compat_i915_alloc
+};
+
+/**
+ * Called whenever a 32-bit process running under a 64-bit kernel
+ * performs an ioctl on /dev/dri/card<n>.
+ *
+ * \param filp file pointer.
+ * \param cmd command.
+ * \param arg user argument.
+ * \return zero on success or negative number on failure.
+ */
+long i915_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	unsigned int nr = DRM_IOCTL_NR(cmd);
+	drm_ioctl_compat_t *fn = NULL;
+	int ret;
+
+	if (nr < DRM_COMMAND_BASE)
+		return drm_compat_ioctl(filp, cmd, arg);
+
+	if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(i915_compat_ioctls))
+		fn = i915_compat_ioctls[nr - DRM_COMMAND_BASE];
+
+	if (fn != NULL)
+		ret = (*fn) (filp, cmd, arg);
+	else
+		ret = drm_ioctl(filp, cmd, arg);
+
+	return ret;
+}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
new file mode 100644
index 00000000..26c67a78
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -0,0 +1,2169 @@
+/* i915_irq.c -- IRQ support for the I915 -*- linux-c -*-
+ */
+/*
+ * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include <linux/sysrq.h>
+#include <linux/slab.h>
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "i915_trace.h"
+#include "intel_drv.h"
+
+#define MAX_NOPID ((u32)~0)
+
+/**
+ * Interrupts that are always left unmasked.
+ *
+ * Since pipe events are edge-triggered from the PIPESTAT register to IIR,
+ * we leave them always unmasked in IMR and then control enabling them through
+ * PIPESTAT alone.
+ */
+#define I915_INTERRUPT_ENABLE_FIX			\
+	(I915_ASLE_INTERRUPT |				\
+	 I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |		\
+	 I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |		\
+	 I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |	\
+	 I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |	\
+	 I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
+
+/** Interrupts that we mask and unmask at runtime. */
+#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT | I915_BSD_USER_INTERRUPT)
+
+#define I915_PIPE_VBLANK_STATUS	(PIPE_START_VBLANK_INTERRUPT_STATUS |\
+				 PIPE_VBLANK_INTERRUPT_STATUS)
+
+#define I915_PIPE_VBLANK_ENABLE	(PIPE_START_VBLANK_INTERRUPT_ENABLE |\
+				 PIPE_VBLANK_INTERRUPT_ENABLE)
+
+#define DRM_I915_VBLANK_PIPE_ALL	(DRM_I915_VBLANK_PIPE_A | \
+					 DRM_I915_VBLANK_PIPE_B)
+
+/* For display hotplug interrupt */
+static void
+ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	if ((dev_priv->irq_mask & mask) != 0) {
+		dev_priv->irq_mask &= ~mask;
+		I915_WRITE(DEIMR, dev_priv->irq_mask);
+		POSTING_READ(DEIMR);
+	}
+}
+
+static inline void
+ironlake_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	if ((dev_priv->irq_mask & mask) != mask) {
+		dev_priv->irq_mask |= mask;
+		I915_WRITE(DEIMR, dev_priv->irq_mask);
+		POSTING_READ(DEIMR);
+	}
+}
+
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+	if ((dev_priv->pipestat[pipe] & mask) != mask) {
+		u32 reg = PIPESTAT(pipe);
+
+		dev_priv->pipestat[pipe] |= mask;
+		/* Enable the interrupt, clear any pending status */
+		I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
+		POSTING_READ(reg);
+	}
+}
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+	if ((dev_priv->pipestat[pipe] & mask) != 0) {
+		u32 reg = PIPESTAT(pipe);
+
+		dev_priv->pipestat[pipe] &= ~mask;
+		I915_WRITE(reg, dev_priv->pipestat[pipe]);
+		POSTING_READ(reg);
+	}
+}
+
+/**
+ * intel_enable_asle - enable ASLE interrupt for OpRegion
+ */
+void intel_enable_asle(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+
+	if (HAS_PCH_SPLIT(dev))
+		ironlake_enable_display_irq(dev_priv, DE_GSE);
+	else {
+		i915_enable_pipestat(dev_priv, 1,
+				     PIPE_LEGACY_BLC_EVENT_ENABLE);
+		if (INTEL_INFO(dev)->gen >= 4)
+			i915_enable_pipestat(dev_priv, 0,
+					     PIPE_LEGACY_BLC_EVENT_ENABLE);
+	}
+
+	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+}
+
+/**
+ * i915_pipe_enabled - check if a pipe is enabled
+ * @dev: DRM device
+ * @pipe: pipe to check
+ *
+ * Reading certain registers when the pipe is disabled can hang the chip.
+ * Use this routine to make sure the PLL is running and the pipe is active
+ * before reading such registers if unsure.
+ */
+static int
+i915_pipe_enabled(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	return I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE;
+}
+
+/* Called from drm generic code, passed a 'crtc', which
+ * we use as a pipe index
+ */
+static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	unsigned long high_frame;
+	unsigned long low_frame;
+	u32 high1, high2, low;
+
+	if (!i915_pipe_enabled(dev, pipe)) {
+		DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
+				"pipe %c\n", pipe_name(pipe));
+		return 0;
+	}
+
+	high_frame = PIPEFRAME(pipe);
+	low_frame = PIPEFRAMEPIXEL(pipe);
+
+	/*
+	 * High & low register fields aren't synchronized, so make sure
+	 * we get a low value that's stable across two reads of the high
+	 * register.
+	 */
+	do {
+		high1 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
+		low   = I915_READ(low_frame)  & PIPE_FRAME_LOW_MASK;
+		high2 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
+	} while (high1 != high2);
+
+	high1 >>= PIPE_FRAME_HIGH_SHIFT;
+	low >>= PIPE_FRAME_LOW_SHIFT;
+	return (high1 << 8) | low;
+}
+
+static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	int reg = PIPE_FRMCOUNT_GM45(pipe);
+
+	if (!i915_pipe_enabled(dev, pipe)) {
+		DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
+				 "pipe %c\n", pipe_name(pipe));
+		return 0;
+	}
+
+	return I915_READ(reg);
+}
+
+static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
+			     int *vpos, int *hpos)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	u32 vbl = 0, position = 0;
+	int vbl_start, vbl_end, htotal, vtotal;
+	bool in_vbl = true;
+	int ret = 0;
+
+	if (!i915_pipe_enabled(dev, pipe)) {
+		DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
+				 "pipe %c\n", pipe_name(pipe));
+		return 0;
+	}
+
+	/* Get vtotal. */
+	vtotal = 1 + ((I915_READ(VTOTAL(pipe)) >> 16) & 0x1fff);
+
+	if (INTEL_INFO(dev)->gen >= 4) {
+		/* No obvious pixelcount register. Only query vertical
+		 * scanout position from Display scan line register.
+		 */
+		position = I915_READ(PIPEDSL(pipe));
+
+		/* Decode into vertical scanout position. Don't have
+		 * horizontal scanout position.
+		 */
+		*vpos = position & 0x1fff;
+		*hpos = 0;
+	} else {
+		/* Have access to pixelcount since start of frame.
+		 * We can split this into vertical and horizontal
+		 * scanout position.
+		 */
+		position = (I915_READ(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
+
+		htotal = 1 + ((I915_READ(HTOTAL(pipe)) >> 16) & 0x1fff);
+		*vpos = position / htotal;
+		*hpos = position - (*vpos * htotal);
+	}
+
+	/* Query vblank area. */
+	vbl = I915_READ(VBLANK(pipe));
+
+	/* Test position against vblank region. */
+	vbl_start = vbl & 0x1fff;
+	vbl_end = (vbl >> 16) & 0x1fff;
+
+	if ((*vpos < vbl_start) || (*vpos > vbl_end))
+		in_vbl = false;
+
+	/* Inside "upper part" of vblank area? Apply corrective offset: */
+	if (in_vbl && (*vpos >= vbl_start))
+		*vpos = *vpos - vtotal;
+
+	/* Readouts valid? */
+	if (vbl > 0)
+		ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE;
+
+	/* In vblank? */
+	if (in_vbl)
+		ret |= DRM_SCANOUTPOS_INVBL;
+
+	return ret;
+}
+
+static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
+			      int *max_error,
+			      struct timeval *vblank_time,
+			      unsigned flags)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+
+	if (pipe < 0 || pipe >= dev_priv->num_pipe) {
+		DRM_ERROR("Invalid crtc %d\n", pipe);
+		return -EINVAL;
+	}
+
+	/* Get drm_crtc to timestamp: */
+	crtc = intel_get_crtc_for_pipe(dev, pipe);
+	if (crtc == NULL) {
+		DRM_ERROR("Invalid crtc %d\n", pipe);
+		return -EINVAL;
+	}
+
+	if (!crtc->enabled) {
+		DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
+		return -EBUSY;
+	}
+
+	/* Helper routine in DRM core does all the work: */
+	return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error,
+						     vblank_time, flags,
+						     crtc);
+}
+
+/*
+ * Handle hotplug events outside the interrupt handler proper.
+ */
+static void i915_hotplug_work_func(struct work_struct *work)
+{
+	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+						    hotplug_work);
+	struct drm_device *dev = dev_priv->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+
+	mutex_lock(&mode_config->mutex);
+	DRM_DEBUG_KMS("running encoder hotplug functions\n");
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+		if (encoder->hot_plug)
+			encoder->hot_plug(encoder);
+
+	mutex_unlock(&mode_config->mutex);
+
+	/* Just fire off a uevent and let userspace tell us what to do */
+	drm_helper_hpd_irq_event(dev);
+}
+
+static void i915_handle_rps_change(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 busy_up, busy_down, max_avg, min_avg;
+	u8 new_delay = dev_priv->cur_delay;
+
+	I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG);
+	busy_up = I915_READ(RCPREVBSYTUPAVG);
+	busy_down = I915_READ(RCPREVBSYTDNAVG);
+	max_avg = I915_READ(RCBMAXAVG);
+	min_avg = I915_READ(RCBMINAVG);
+
+	/* Handle RCS change request from hw */
+	if (busy_up > max_avg) {
+		if (dev_priv->cur_delay != dev_priv->max_delay)
+			new_delay = dev_priv->cur_delay - 1;
+		if (new_delay < dev_priv->max_delay)
+			new_delay = dev_priv->max_delay;
+	} else if (busy_down < min_avg) {
+		if (dev_priv->cur_delay != dev_priv->min_delay)
+			new_delay = dev_priv->cur_delay + 1;
+		if (new_delay > dev_priv->min_delay)
+			new_delay = dev_priv->min_delay;
+	}
+
+	if (ironlake_set_drps(dev, new_delay))
+		dev_priv->cur_delay = new_delay;
+
+	return;
+}
+
+static void notify_ring(struct drm_device *dev,
+			struct intel_ring_buffer *ring)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 seqno;
+
+	if (ring->obj == NULL)
+		return;
+
+	seqno = ring->get_seqno(ring);
+	trace_i915_gem_request_complete(ring, seqno);
+
+	ring->irq_seqno = seqno;
+	wake_up_all(&ring->irq_queue);
+	if (i915_enable_hangcheck) {
+		dev_priv->hangcheck_count = 0;
+		mod_timer(&dev_priv->hangcheck_timer,
+			  jiffies +
+			  msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
+	}
+}
+
+static void gen6_pm_rps_work(struct work_struct *work)
+{
+	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+						    rps_work);
+	u8 new_delay = dev_priv->cur_delay;
+	u32 pm_iir, pm_imr;
+
+	spin_lock_irq(&dev_priv->rps_lock);
+	pm_iir = dev_priv->pm_iir;
+	dev_priv->pm_iir = 0;
+	pm_imr = I915_READ(GEN6_PMIMR);
+	I915_WRITE(GEN6_PMIMR, 0);
+	spin_unlock_irq(&dev_priv->rps_lock);
+
+	if (!pm_iir)
+		return;
+
+	mutex_lock(&dev_priv->dev->struct_mutex);
+	if (pm_iir & GEN6_PM_RP_UP_THRESHOLD) {
+		if (dev_priv->cur_delay != dev_priv->max_delay)
+			new_delay = dev_priv->cur_delay + 1;
+		if (new_delay > dev_priv->max_delay)
+			new_delay = dev_priv->max_delay;
+	} else if (pm_iir & (GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT)) {
+		gen6_gt_force_wake_get(dev_priv);
+		if (dev_priv->cur_delay != dev_priv->min_delay)
+			new_delay = dev_priv->cur_delay - 1;
+		if (new_delay < dev_priv->min_delay) {
+			new_delay = dev_priv->min_delay;
+			I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
+				   I915_READ(GEN6_RP_INTERRUPT_LIMITS) |
+				   ((new_delay << 16) & 0x3f0000));
+		} else {
+			/* Make sure we continue to get down interrupts
+			 * until we hit the minimum frequency */
+			I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
+				   I915_READ(GEN6_RP_INTERRUPT_LIMITS) & ~0x3f0000);
+		}
+		gen6_gt_force_wake_put(dev_priv);
+	}
+
+	gen6_set_rps(dev_priv->dev, new_delay);
+	dev_priv->cur_delay = new_delay;
+
+	/*
+	 * rps_lock not held here because clearing is non-destructive. There is
+	 * an *extremely* unlikely race with gen6_rps_enable() that is prevented
+	 * by holding struct_mutex for the duration of the write.
+	 */
+	mutex_unlock(&dev_priv->dev->struct_mutex);
+}
+
+static void gen6_queue_rps_work(struct drm_i915_private *dev_priv,
+				u32 pm_iir)
+{
+	unsigned long flags;
+
+	/*
+	 * IIR bits should never already be set because IMR should
+	 * prevent an interrupt from being shown in IIR. The warning
+	 * displays a case where we've unsafely cleared
+	 * dev_priv->pm_iir. Although missing an interrupt of the same
+	 * type is not a problem, it displays a problem in the logic.
+	 *
+	 * The mask bit in IMR is cleared by rps_work.
+	 */
+
+	spin_lock_irqsave(&dev_priv->rps_lock, flags);
+	dev_priv->pm_iir |= pm_iir;
+	I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
+	POSTING_READ(GEN6_PMIMR);
+	spin_unlock_irqrestore(&dev_priv->rps_lock, flags);
+
+	queue_work(dev_priv->wq, &dev_priv->rps_work);
+}
+
+static void pch_irq_handler(struct drm_device *dev, u32 pch_iir)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	int pipe;
+
+	if (pch_iir & SDE_AUDIO_POWER_MASK)
+		DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
+				 (pch_iir & SDE_AUDIO_POWER_MASK) >>
+				 SDE_AUDIO_POWER_SHIFT);
+
+	if (pch_iir & SDE_GMBUS)
+		DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n");
+
+	if (pch_iir & SDE_AUDIO_HDCP_MASK)
+		DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n");
+
+	if (pch_iir & SDE_AUDIO_TRANS_MASK)
+		DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n");
+
+	if (pch_iir & SDE_POISON)
+		DRM_ERROR("PCH poison interrupt\n");
+
+	if (pch_iir & SDE_FDI_MASK)
+		for_each_pipe(pipe)
+			DRM_DEBUG_DRIVER("  pipe %c FDI IIR: 0x%08x\n",
+					 pipe_name(pipe),
+					 I915_READ(FDI_RX_IIR(pipe)));
+
+	if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE))
+		DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n");
+
+	if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR))
+		DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n");
+
+	if (pch_iir & SDE_TRANSB_FIFO_UNDER)
+		DRM_DEBUG_DRIVER("PCH transcoder B underrun interrupt\n");
+	if (pch_iir & SDE_TRANSA_FIFO_UNDER)
+		DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n");
+}
+
+static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)
+{
+	struct drm_device *dev = (struct drm_device *) arg;
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	int ret = IRQ_NONE;
+	u32 de_iir, gt_iir, de_ier, pch_iir, pm_iir;
+	struct drm_i915_master_private *master_priv;
+
+	atomic_inc(&dev_priv->irq_received);
+
+	/* disable master interrupt before clearing iir  */
+	de_ier = I915_READ(DEIER);
+	I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
+	POSTING_READ(DEIER);
+
+	de_iir = I915_READ(DEIIR);
+	gt_iir = I915_READ(GTIIR);
+	pch_iir = I915_READ(SDEIIR);
+	pm_iir = I915_READ(GEN6_PMIIR);
+
+	if (de_iir == 0 && gt_iir == 0 && pch_iir == 0 && pm_iir == 0)
+		goto done;
+
+	ret = IRQ_HANDLED;
+
+	if (dev->primary->master) {
+		master_priv = dev->primary->master->driver_priv;
+		if (master_priv->sarea_priv)
+			master_priv->sarea_priv->last_dispatch =
+				READ_BREADCRUMB(dev_priv);
+	}
+
+	if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY))
+		notify_ring(dev, &dev_priv->ring[RCS]);
+	if (gt_iir & GT_GEN6_BSD_USER_INTERRUPT)
+		notify_ring(dev, &dev_priv->ring[VCS]);
+	if (gt_iir & GT_BLT_USER_INTERRUPT)
+		notify_ring(dev, &dev_priv->ring[BCS]);
+
+	if (de_iir & DE_GSE_IVB)
+		intel_opregion_gse_intr(dev);
+
+	if (de_iir & DE_PLANEA_FLIP_DONE_IVB) {
+		intel_prepare_page_flip(dev, 0);
+		intel_finish_page_flip_plane(dev, 0);
+	}
+
+	if (de_iir & DE_PLANEB_FLIP_DONE_IVB) {
+		intel_prepare_page_flip(dev, 1);
+		intel_finish_page_flip_plane(dev, 1);
+	}
+
+	if (de_iir & DE_PIPEA_VBLANK_IVB)
+		drm_handle_vblank(dev, 0);
+
+	if (de_iir & DE_PIPEB_VBLANK_IVB)
+		drm_handle_vblank(dev, 1);
+
+	/* check event from PCH */
+	if (de_iir & DE_PCH_EVENT_IVB) {
+		if (pch_iir & SDE_HOTPLUG_MASK_CPT)
+			queue_work(dev_priv->wq, &dev_priv->hotplug_work);
+		pch_irq_handler(dev, pch_iir);
+	}
+
+	if (pm_iir & GEN6_PM_DEFERRED_EVENTS)
+		gen6_queue_rps_work(dev_priv, pm_iir);
+
+	/* should clear PCH hotplug event before clear CPU irq */
+	I915_WRITE(SDEIIR, pch_iir);
+	I915_WRITE(GTIIR, gt_iir);
+	I915_WRITE(DEIIR, de_iir);
+	I915_WRITE(GEN6_PMIIR, pm_iir);
+
+done:
+	I915_WRITE(DEIER, de_ier);
+	POSTING_READ(DEIER);
+
+	return ret;
+}
+
+static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
+{
+	struct drm_device *dev = (struct drm_device *) arg;
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	int ret = IRQ_NONE;
+	u32 de_iir, gt_iir, de_ier, pch_iir, pm_iir;
+	u32 hotplug_mask;
+	struct drm_i915_master_private *master_priv;
+	u32 bsd_usr_interrupt = GT_BSD_USER_INTERRUPT;
+
+	atomic_inc(&dev_priv->irq_received);
+
+	if (IS_GEN6(dev))
+		bsd_usr_interrupt = GT_GEN6_BSD_USER_INTERRUPT;
+
+	/* disable master interrupt before clearing iir  */
+	de_ier = I915_READ(DEIER);
+	I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
+	POSTING_READ(DEIER);
+
+	de_iir = I915_READ(DEIIR);
+	gt_iir = I915_READ(GTIIR);
+	pch_iir = I915_READ(SDEIIR);
+	pm_iir = I915_READ(GEN6_PMIIR);
+
+	if (de_iir == 0 && gt_iir == 0 && pch_iir == 0 &&
+	    (!IS_GEN6(dev) || pm_iir == 0))
+		goto done;
+
+	if (HAS_PCH_CPT(dev))
+		hotplug_mask = SDE_HOTPLUG_MASK_CPT;
+	else
+		hotplug_mask = SDE_HOTPLUG_MASK;
+
+	ret = IRQ_HANDLED;
+
+	if (dev->primary->master) {
+		master_priv = dev->primary->master->driver_priv;
+		if (master_priv->sarea_priv)
+			master_priv->sarea_priv->last_dispatch =
+				READ_BREADCRUMB(dev_priv);
+	}
+
+	if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY))
+		notify_ring(dev, &dev_priv->ring[RCS]);
+	if (gt_iir & bsd_usr_interrupt)
+		notify_ring(dev, &dev_priv->ring[VCS]);
+	if (gt_iir & GT_BLT_USER_INTERRUPT)
+		notify_ring(dev, &dev_priv->ring[BCS]);
+
+	if (de_iir & DE_GSE)
+		intel_opregion_gse_intr(dev);
+
+	if (de_iir & DE_PLANEA_FLIP_DONE) {
+		intel_prepare_page_flip(dev, 0);
+		intel_finish_page_flip_plane(dev, 0);
+	}
+
+	if (de_iir & DE_PLANEB_FLIP_DONE) {
+		intel_prepare_page_flip(dev, 1);
+		intel_finish_page_flip_plane(dev, 1);
+	}
+
+	if (de_iir & DE_PIPEA_VBLANK)
+		drm_handle_vblank(dev, 0);
+
+	if (de_iir & DE_PIPEB_VBLANK)
+		drm_handle_vblank(dev, 1);
+
+	/* check event from PCH */
+	if (de_iir & DE_PCH_EVENT) {
+		if (pch_iir & hotplug_mask)
+			queue_work(dev_priv->wq, &dev_priv->hotplug_work);
+		pch_irq_handler(dev, pch_iir);
+	}
+
+	if (de_iir & DE_PCU_EVENT) {
+		I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
+		i915_handle_rps_change(dev);
+	}
+
+	if (IS_GEN6(dev) && pm_iir & GEN6_PM_DEFERRED_EVENTS)
+		gen6_queue_rps_work(dev_priv, pm_iir);
+
+	/* should clear PCH hotplug event before clear CPU irq */
+	I915_WRITE(SDEIIR, pch_iir);
+	I915_WRITE(GTIIR, gt_iir);
+	I915_WRITE(DEIIR, de_iir);
+	I915_WRITE(GEN6_PMIIR, pm_iir);
+
+done:
+	I915_WRITE(DEIER, de_ier);
+	POSTING_READ(DEIER);
+
+	return ret;
+}
+
+/**
+ * i915_error_work_func - do process context error handling work
+ * @work: work struct
+ *
+ * Fire an error uevent so userspace can see that a hang or error
+ * was detected.
+ */
+static void i915_error_work_func(struct work_struct *work)
+{
+	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+						    error_work);
+	struct drm_device *dev = dev_priv->dev;
+	char *error_event[] = { "ERROR=1", NULL };
+	char *reset_event[] = { "RESET=1", NULL };
+	char *reset_done_event[] = { "ERROR=0", NULL };
+
+	kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event);
+
+	if (atomic_read(&dev_priv->mm.wedged)) {
+		DRM_DEBUG_DRIVER("resetting chip\n");
+		kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_event);
+		if (!i915_reset(dev, GRDOM_RENDER)) {
+			atomic_set(&dev_priv->mm.wedged, 0);
+			kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_done_event);
+		}
+		complete_all(&dev_priv->error_completion);
+	}
+}
+
+#ifdef CONFIG_DEBUG_FS
+static struct drm_i915_error_object *
+i915_error_object_create(struct drm_i915_private *dev_priv,
+			 struct drm_i915_gem_object *src)
+{
+	struct drm_i915_error_object *dst;
+	int page, page_count;
+	u32 reloc_offset;
+
+	if (src == NULL || src->pages == NULL)
+		return NULL;
+
+	page_count = src->base.size / PAGE_SIZE;
+
+	dst = kmalloc(sizeof(*dst) + page_count * sizeof(u32 *), GFP_ATOMIC);
+	if (dst == NULL)
+		return NULL;
+
+	reloc_offset = src->gtt_offset;
+	for (page = 0; page < page_count; page++) {
+		unsigned long flags;
+		void *d;
+
+		d = kmalloc(PAGE_SIZE, GFP_ATOMIC);
+		if (d == NULL)
+			goto unwind;
+
+		local_irq_save(flags);
+		if (reloc_offset < dev_priv->mm.gtt_mappable_end) {
+			void __iomem *s;
+
+			/* Simply ignore tiling or any overlapping fence.
+			 * It's part of the error state, and this hopefully
+			 * captures what the GPU read.
+			 */
+
+			s = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
+						     reloc_offset);
+			memcpy_fromio(d, s, PAGE_SIZE);
+			io_mapping_unmap_atomic(s);
+		} else {
+			void *s;
+
+			drm_clflush_pages(&src->pages[page], 1);
+
+			s = kmap_atomic(src->pages[page]);
+			memcpy(d, s, PAGE_SIZE);
+			kunmap_atomic(s);
+
+			drm_clflush_pages(&src->pages[page], 1);
+		}
+		local_irq_restore(flags);
+
+		dst->pages[page] = d;
+
+		reloc_offset += PAGE_SIZE;
+	}
+	dst->page_count = page_count;
+	dst->gtt_offset = src->gtt_offset;
+
+	return dst;
+
+unwind:
+	while (page--)
+		kfree(dst->pages[page]);
+	kfree(dst);
+	return NULL;
+}
+
+static void
+i915_error_object_free(struct drm_i915_error_object *obj)
+{
+	int page;
+
+	if (obj == NULL)
+		return;
+
+	for (page = 0; page < obj->page_count; page++)
+		kfree(obj->pages[page]);
+
+	kfree(obj);
+}
+
+static void
+i915_error_state_free(struct drm_device *dev,
+		      struct drm_i915_error_state *error)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(error->ring); i++) {
+		i915_error_object_free(error->ring[i].batchbuffer);
+		i915_error_object_free(error->ring[i].ringbuffer);
+		kfree(error->ring[i].requests);
+	}
+
+	kfree(error->active_bo);
+	kfree(error->overlay);
+	kfree(error);
+}
+
+static u32 capture_bo_list(struct drm_i915_error_buffer *err,
+			   int count,
+			   struct list_head *head)
+{
+	struct drm_i915_gem_object *obj;
+	int i = 0;
+
+	list_for_each_entry(obj, head, mm_list) {
+		err->size = obj->base.size;
+		err->name = obj->base.name;
+		err->seqno = obj->last_rendering_seqno;
+		err->gtt_offset = obj->gtt_offset;
+		err->read_domains = obj->base.read_domains;
+		err->write_domain = obj->base.write_domain;
+		err->fence_reg = obj->fence_reg;
+		err->pinned = 0;
+		if (obj->pin_count > 0)
+			err->pinned = 1;
+		if (obj->user_pin_count > 0)
+			err->pinned = -1;
+		err->tiling = obj->tiling_mode;
+		err->dirty = obj->dirty;
+		err->purgeable = obj->madv != I915_MADV_WILLNEED;
+		err->ring = obj->ring ? obj->ring->id : -1;
+		err->cache_level = obj->cache_level;
+
+		if (++i == count)
+			break;
+
+		err++;
+	}
+
+	return i;
+}
+
+static void i915_gem_record_fences(struct drm_device *dev,
+				   struct drm_i915_error_state *error)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+
+	/* Fences */
+	switch (INTEL_INFO(dev)->gen) {
+	case 7:
+	case 6:
+		for (i = 0; i < 16; i++)
+			error->fence[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8));
+		break;
+	case 5:
+	case 4:
+		for (i = 0; i < 16; i++)
+			error->fence[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
+		break;
+	case 3:
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				error->fence[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+	case 2:
+		for (i = 0; i < 8; i++)
+			error->fence[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+		break;
+
+	}
+}
+
+static struct drm_i915_error_object *
+i915_error_first_batchbuffer(struct drm_i915_private *dev_priv,
+			     struct intel_ring_buffer *ring)
+{
+	struct drm_i915_gem_object *obj;
+	u32 seqno;
+
+	if (!ring->get_seqno)
+		return NULL;
+
+	seqno = ring->get_seqno(ring);
+	list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
+		if (obj->ring != ring)
+			continue;
+
+		if (i915_seqno_passed(seqno, obj->last_rendering_seqno))
+			continue;
+
+		if ((obj->base.read_domains & I915_GEM_DOMAIN_COMMAND) == 0)
+			continue;
+
+		/* We need to copy these to an anonymous buffer as the simplest
+		 * method to avoid being overwritten by userspace.
+		 */
+		return i915_error_object_create(dev_priv, obj);
+	}
+
+	return NULL;
+}
+
+static void i915_record_ring_state(struct drm_device *dev,
+				   struct drm_i915_error_state *error,
+				   struct intel_ring_buffer *ring)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (INTEL_INFO(dev)->gen >= 6) {
+		error->faddr[ring->id] = I915_READ(RING_DMA_FADD(ring->mmio_base));
+		error->fault_reg[ring->id] = I915_READ(RING_FAULT_REG(ring));
+		error->semaphore_mboxes[ring->id][0]
+			= I915_READ(RING_SYNC_0(ring->mmio_base));
+		error->semaphore_mboxes[ring->id][1]
+			= I915_READ(RING_SYNC_1(ring->mmio_base));
+	}
+
+	if (INTEL_INFO(dev)->gen >= 4) {
+		error->ipeir[ring->id] = I915_READ(RING_IPEIR(ring->mmio_base));
+		error->ipehr[ring->id] = I915_READ(RING_IPEHR(ring->mmio_base));
+		error->instdone[ring->id] = I915_READ(RING_INSTDONE(ring->mmio_base));
+		error->instps[ring->id] = I915_READ(RING_INSTPS(ring->mmio_base));
+		if (ring->id == RCS) {
+			error->instdone1 = I915_READ(INSTDONE1);
+			error->bbaddr = I915_READ64(BB_ADDR);
+		}
+	} else {
+		error->ipeir[ring->id] = I915_READ(IPEIR);
+		error->ipehr[ring->id] = I915_READ(IPEHR);
+		error->instdone[ring->id] = I915_READ(INSTDONE);
+	}
+
+	error->instpm[ring->id] = I915_READ(RING_INSTPM(ring->mmio_base));
+	error->seqno[ring->id] = ring->get_seqno(ring);
+	error->acthd[ring->id] = intel_ring_get_active_head(ring);
+	error->head[ring->id] = I915_READ_HEAD(ring);
+	error->tail[ring->id] = I915_READ_TAIL(ring);
+
+	error->cpu_ring_head[ring->id] = ring->head;
+	error->cpu_ring_tail[ring->id] = ring->tail;
+}
+
+static void i915_gem_record_rings(struct drm_device *dev,
+				  struct drm_i915_error_state *error)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_request *request;
+	int i, count;
+
+	for (i = 0; i < I915_NUM_RINGS; i++) {
+		struct intel_ring_buffer *ring = &dev_priv->ring[i];
+
+		if (ring->obj == NULL)
+			continue;
+
+		i915_record_ring_state(dev, error, ring);
+
+		error->ring[i].batchbuffer =
+			i915_error_first_batchbuffer(dev_priv, ring);
+
+		error->ring[i].ringbuffer =
+			i915_error_object_create(dev_priv, ring->obj);
+
+		count = 0;
+		list_for_each_entry(request, &ring->request_list, list)
+			count++;
+
+		error->ring[i].num_requests = count;
+		error->ring[i].requests =
+			kmalloc(count*sizeof(struct drm_i915_error_request),
+				GFP_ATOMIC);
+		if (error->ring[i].requests == NULL) {
+			error->ring[i].num_requests = 0;
+			continue;
+		}
+
+		count = 0;
+		list_for_each_entry(request, &ring->request_list, list) {
+			struct drm_i915_error_request *erq;
+
+			erq = &error->ring[i].requests[count++];
+			erq->seqno = request->seqno;
+			erq->jiffies = request->emitted_jiffies;
+			erq->tail = request->tail;
+		}
+	}
+}
+
+/**
+ * i915_capture_error_state - capture an error record for later analysis
+ * @dev: drm device
+ *
+ * Should be called when an error is detected (either a hang or an error
+ * interrupt) to capture error state from the time of the error.  Fills
+ * out a structure which becomes available in debugfs for user level tools
+ * to pick up.
+ */
+static void i915_capture_error_state(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	struct drm_i915_error_state *error;
+	unsigned long flags;
+	int i, pipe;
+
+	spin_lock_irqsave(&dev_priv->error_lock, flags);
+	error = dev_priv->first_error;
+	spin_unlock_irqrestore(&dev_priv->error_lock, flags);
+	if (error)
+		return;
+
+	/* Account for pipe specific data like PIPE*STAT */
+	error = kzalloc(sizeof(*error), GFP_ATOMIC);
+	if (!error) {
+		DRM_DEBUG_DRIVER("out of memory, not capturing error state\n");
+		return;
+	}
+
+	DRM_INFO("capturing error event; look for more information in /debug/dri/%d/i915_error_state\n",
+		 dev->primary->index);
+
+	error->eir = I915_READ(EIR);
+	error->pgtbl_er = I915_READ(PGTBL_ER);
+	for_each_pipe(pipe)
+		error->pipestat[pipe] = I915_READ(PIPESTAT(pipe));
+
+	if (INTEL_INFO(dev)->gen >= 6) {
+		error->error = I915_READ(ERROR_GEN6);
+		error->done_reg = I915_READ(DONE_REG);
+	}
+
+	i915_gem_record_fences(dev, error);
+	i915_gem_record_rings(dev, error);
+
+	/* Record buffers on the active and pinned lists. */
+	error->active_bo = NULL;
+	error->pinned_bo = NULL;
+
+	i = 0;
+	list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list)
+		i++;
+	error->active_bo_count = i;
+	list_for_each_entry(obj, &dev_priv->mm.pinned_list, mm_list)
+		i++;
+	error->pinned_bo_count = i - error->active_bo_count;
+
+	error->active_bo = NULL;
+	error->pinned_bo = NULL;
+	if (i) {
+		error->active_bo = kmalloc(sizeof(*error->active_bo)*i,
+					   GFP_ATOMIC);
+		if (error->active_bo)
+			error->pinned_bo =
+				error->active_bo + error->active_bo_count;
+	}
+
+	if (error->active_bo)
+		error->active_bo_count =
+			capture_bo_list(error->active_bo,
+					error->active_bo_count,
+					&dev_priv->mm.active_list);
+
+	if (error->pinned_bo)
+		error->pinned_bo_count =
+			capture_bo_list(error->pinned_bo,
+					error->pinned_bo_count,
+					&dev_priv->mm.pinned_list);
+
+	do_gettimeofday(&error->time);
+
+	error->overlay = intel_overlay_capture_error_state(dev);
+	error->display = intel_display_capture_error_state(dev);
+
+	spin_lock_irqsave(&dev_priv->error_lock, flags);
+	if (dev_priv->first_error == NULL) {
+		dev_priv->first_error = error;
+		error = NULL;
+	}
+	spin_unlock_irqrestore(&dev_priv->error_lock, flags);
+
+	if (error)
+		i915_error_state_free(dev, error);
+}
+
+void i915_destroy_error_state(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_error_state *error;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev_priv->error_lock, flags);
+	error = dev_priv->first_error;
+	dev_priv->first_error = NULL;
+	spin_unlock_irqrestore(&dev_priv->error_lock, flags);
+
+	if (error)
+		i915_error_state_free(dev, error);
+}
+#else
+#define i915_capture_error_state(x)
+#endif
+
+static void i915_report_and_clear_eir(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 eir = I915_READ(EIR);
+	int pipe;
+
+	if (!eir)
+		return;
+
+	printk(KERN_ERR "render error detected, EIR: 0x%08x\n",
+	       eir);
+
+	if (IS_G4X(dev)) {
+		if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) {
+			u32 ipeir = I915_READ(IPEIR_I965);
+
+			printk(KERN_ERR "  IPEIR: 0x%08x\n",
+			       I915_READ(IPEIR_I965));
+			printk(KERN_ERR "  IPEHR: 0x%08x\n",
+			       I915_READ(IPEHR_I965));
+			printk(KERN_ERR "  INSTDONE: 0x%08x\n",
+			       I915_READ(INSTDONE_I965));
+			printk(KERN_ERR "  INSTPS: 0x%08x\n",
+			       I915_READ(INSTPS));
+			printk(KERN_ERR "  INSTDONE1: 0x%08x\n",
+			       I915_READ(INSTDONE1));
+			printk(KERN_ERR "  ACTHD: 0x%08x\n",
+			       I915_READ(ACTHD_I965));
+			I915_WRITE(IPEIR_I965, ipeir);
+			POSTING_READ(IPEIR_I965);
+		}
+		if (eir & GM45_ERROR_PAGE_TABLE) {
+			u32 pgtbl_err = I915_READ(PGTBL_ER);
+			printk(KERN_ERR "page table error\n");
+			printk(KERN_ERR "  PGTBL_ER: 0x%08x\n",
+			       pgtbl_err);
+			I915_WRITE(PGTBL_ER, pgtbl_err);
+			POSTING_READ(PGTBL_ER);
+		}
+	}
+
+	if (!IS_GEN2(dev)) {
+		if (eir & I915_ERROR_PAGE_TABLE) {
+			u32 pgtbl_err = I915_READ(PGTBL_ER);
+			printk(KERN_ERR "page table error\n");
+			printk(KERN_ERR "  PGTBL_ER: 0x%08x\n",
+			       pgtbl_err);
+			I915_WRITE(PGTBL_ER, pgtbl_err);
+			POSTING_READ(PGTBL_ER);
+		}
+	}
+
+	if (eir & I915_ERROR_MEMORY_REFRESH) {
+		printk(KERN_ERR "memory refresh error:\n");
+		for_each_pipe(pipe)
+			printk(KERN_ERR "pipe %c stat: 0x%08x\n",
+			       pipe_name(pipe), I915_READ(PIPESTAT(pipe)));
+		/* pipestat has already been acked */
+	}
+	if (eir & I915_ERROR_INSTRUCTION) {
+		printk(KERN_ERR "instruction error\n");
+		printk(KERN_ERR "  INSTPM: 0x%08x\n",
+		       I915_READ(INSTPM));
+		if (INTEL_INFO(dev)->gen < 4) {
+			u32 ipeir = I915_READ(IPEIR);
+
+			printk(KERN_ERR "  IPEIR: 0x%08x\n",
+			       I915_READ(IPEIR));
+			printk(KERN_ERR "  IPEHR: 0x%08x\n",
+			       I915_READ(IPEHR));
+			printk(KERN_ERR "  INSTDONE: 0x%08x\n",
+			       I915_READ(INSTDONE));
+			printk(KERN_ERR "  ACTHD: 0x%08x\n",
+			       I915_READ(ACTHD));
+			I915_WRITE(IPEIR, ipeir);
+			POSTING_READ(IPEIR);
+		} else {
+			u32 ipeir = I915_READ(IPEIR_I965);
+
+			printk(KERN_ERR "  IPEIR: 0x%08x\n",
+			       I915_READ(IPEIR_I965));
+			printk(KERN_ERR "  IPEHR: 0x%08x\n",
+			       I915_READ(IPEHR_I965));
+			printk(KERN_ERR "  INSTDONE: 0x%08x\n",
+			       I915_READ(INSTDONE_I965));
+			printk(KERN_ERR "  INSTPS: 0x%08x\n",
+			       I915_READ(INSTPS));
+			printk(KERN_ERR "  INSTDONE1: 0x%08x\n",
+			       I915_READ(INSTDONE1));
+			printk(KERN_ERR "  ACTHD: 0x%08x\n",
+			       I915_READ(ACTHD_I965));
+			I915_WRITE(IPEIR_I965, ipeir);
+			POSTING_READ(IPEIR_I965);
+		}
+	}
+
+	I915_WRITE(EIR, eir);
+	POSTING_READ(EIR);
+	eir = I915_READ(EIR);
+	if (eir) {
+		/*
+		 * some errors might have become stuck,
+		 * mask them.
+		 */
+		DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
+		I915_WRITE(EMR, I915_READ(EMR) | eir);
+		I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
+	}
+}
+
+/**
+ * i915_handle_error - handle an error interrupt
+ * @dev: drm device
+ *
+ * Do some basic checking of regsiter state at error interrupt time and
+ * dump it to the syslog.  Also call i915_capture_error_state() to make
+ * sure we get a record and make it available in debugfs.  Fire a uevent
+ * so userspace knows something bad happened (should trigger collection
+ * of a ring dump etc.).
+ */
+void i915_handle_error(struct drm_device *dev, bool wedged)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	i915_capture_error_state(dev);
+	i915_report_and_clear_eir(dev);
+
+	if (wedged) {
+		INIT_COMPLETION(dev_priv->error_completion);
+		atomic_set(&dev_priv->mm.wedged, 1);
+
+		/*
+		 * Wakeup waiting processes so they don't hang
+		 */
+		wake_up_all(&dev_priv->ring[RCS].irq_queue);
+		if (HAS_BSD(dev))
+			wake_up_all(&dev_priv->ring[VCS].irq_queue);
+		if (HAS_BLT(dev))
+			wake_up_all(&dev_priv->ring[BCS].irq_queue);
+	}
+
+	queue_work(dev_priv->wq, &dev_priv->error_work);
+}
+
+static void i915_pageflip_stall_check(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_i915_gem_object *obj;
+	struct intel_unpin_work *work;
+	unsigned long flags;
+	bool stall_detected;
+
+	/* Ignore early vblank irqs */
+	if (intel_crtc == NULL)
+		return;
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	work = intel_crtc->unpin_work;
+
+	if (work == NULL || work->pending || !work->enable_stall_check) {
+		/* Either the pending flip IRQ arrived, or we're too early. Don't check */
+		spin_unlock_irqrestore(&dev->event_lock, flags);
+		return;
+	}
+
+	/* Potential stall - if we see that the flip has happened, assume a missed interrupt */
+	obj = work->pending_flip_obj;
+	if (INTEL_INFO(dev)->gen >= 4) {
+		int dspsurf = DSPSURF(intel_crtc->plane);
+		stall_detected = I915_READ(dspsurf) == obj->gtt_offset;
+	} else {
+		int dspaddr = DSPADDR(intel_crtc->plane);
+		stall_detected = I915_READ(dspaddr) == (obj->gtt_offset +
+							crtc->y * crtc->fb->pitches[0] +
+							crtc->x * crtc->fb->bits_per_pixel/8);
+	}
+
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+
+	if (stall_detected) {
+		DRM_DEBUG_DRIVER("Pageflip stall detected\n");
+		intel_prepare_page_flip(dev, intel_crtc->plane);
+	}
+}
+
+static irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
+{
+	struct drm_device *dev = (struct drm_device *) arg;
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	struct drm_i915_master_private *master_priv;
+	u32 iir, new_iir;
+	u32 pipe_stats[I915_MAX_PIPES];
+	u32 vblank_status;
+	int vblank = 0;
+	unsigned long irqflags;
+	int irq_received;
+	int ret = IRQ_NONE, pipe;
+	bool blc_event = false;
+
+	atomic_inc(&dev_priv->irq_received);
+
+	iir = I915_READ(IIR);
+
+	if (INTEL_INFO(dev)->gen >= 4)
+		vblank_status = PIPE_START_VBLANK_INTERRUPT_STATUS;
+	else
+		vblank_status = PIPE_VBLANK_INTERRUPT_STATUS;
+
+	for (;;) {
+		irq_received = iir != 0;
+
+		/* Can't rely on pipestat interrupt bit in iir as it might
+		 * have been cleared after the pipestat interrupt was received.
+		 * It doesn't set the bit in iir again, but it still produces
+		 * interrupts (for non-MSI).
+		 */
+		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+		if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
+			i915_handle_error(dev, false);
+
+		for_each_pipe(pipe) {
+			int reg = PIPESTAT(pipe);
+			pipe_stats[pipe] = I915_READ(reg);
+
+			/*
+			 * Clear the PIPE*STAT regs before the IIR
+			 */
+			if (pipe_stats[pipe] & 0x8000ffff) {
+				if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
+					DRM_DEBUG_DRIVER("pipe %c underrun\n",
+							 pipe_name(pipe));
+				I915_WRITE(reg, pipe_stats[pipe]);
+				irq_received = 1;
+			}
+		}
+		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+
+		if (!irq_received)
+			break;
+
+		ret = IRQ_HANDLED;
+
+		/* Consume port.  Then clear IIR or we'll miss events */
+		if ((I915_HAS_HOTPLUG(dev)) &&
+		    (iir & I915_DISPLAY_PORT_INTERRUPT)) {
+			u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
+
+			DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
+				  hotplug_status);
+			if (hotplug_status & dev_priv->hotplug_supported_mask)
+				queue_work(dev_priv->wq,
+					   &dev_priv->hotplug_work);
+
+			I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
+			I915_READ(PORT_HOTPLUG_STAT);
+		}
+
+		I915_WRITE(IIR, iir);
+		new_iir = I915_READ(IIR); /* Flush posted writes */
+
+		if (dev->primary->master) {
+			master_priv = dev->primary->master->driver_priv;
+			if (master_priv->sarea_priv)
+				master_priv->sarea_priv->last_dispatch =
+					READ_BREADCRUMB(dev_priv);
+		}
+
+		if (iir & I915_USER_INTERRUPT)
+			notify_ring(dev, &dev_priv->ring[RCS]);
+		if (iir & I915_BSD_USER_INTERRUPT)
+			notify_ring(dev, &dev_priv->ring[VCS]);
+
+		if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT) {
+			intel_prepare_page_flip(dev, 0);
+			if (dev_priv->flip_pending_is_done)
+				intel_finish_page_flip_plane(dev, 0);
+		}
+
+		if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT) {
+			intel_prepare_page_flip(dev, 1);
+			if (dev_priv->flip_pending_is_done)
+				intel_finish_page_flip_plane(dev, 1);
+		}
+
+		for_each_pipe(pipe) {
+			if (pipe_stats[pipe] & vblank_status &&
+			    drm_handle_vblank(dev, pipe)) {
+				vblank++;
+				if (!dev_priv->flip_pending_is_done) {
+					i915_pageflip_stall_check(dev, pipe);
+					intel_finish_page_flip(dev, pipe);
+				}
+			}
+
+			if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
+				blc_event = true;
+		}
+
+
+		if (blc_event || (iir & I915_ASLE_INTERRUPT))
+			intel_opregion_asle_intr(dev);
+
+		/* With MSI, interrupts are only generated when iir
+		 * transitions from zero to nonzero.  If another bit got
+		 * set while we were handling the existing iir bits, then
+		 * we would never get another interrupt.
+		 *
+		 * This is fine on non-MSI as well, as if we hit this path
+		 * we avoid exiting the interrupt handler only to generate
+		 * another one.
+		 *
+		 * Note that for MSI this could cause a stray interrupt report
+		 * if an interrupt landed in the time between writing IIR and
+		 * the posting read.  This should be rare enough to never
+		 * trigger the 99% of 100,000 interrupts test for disabling
+		 * stray interrupts.
+		 */
+		iir = new_iir;
+	}
+
+	return ret;
+}
+
+static int i915_emit_irq(struct drm_device * dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
+
+	i915_kernel_lost_context(dev);
+
+	DRM_DEBUG_DRIVER("\n");
+
+	dev_priv->counter++;
+	if (dev_priv->counter > 0x7FFFFFFFUL)
+		dev_priv->counter = 1;
+	if (master_priv->sarea_priv)
+		master_priv->sarea_priv->last_enqueue = dev_priv->counter;
+
+	if (BEGIN_LP_RING(4) == 0) {
+		OUT_RING(MI_STORE_DWORD_INDEX);
+		OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+		OUT_RING(dev_priv->counter);
+		OUT_RING(MI_USER_INTERRUPT);
+		ADVANCE_LP_RING();
+	}
+
+	return dev_priv->counter;
+}
+
+static int i915_wait_irq(struct drm_device * dev, int irq_nr)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
+	int ret = 0;
+	struct intel_ring_buffer *ring = LP_RING(dev_priv);
+
+	DRM_DEBUG_DRIVER("irq_nr=%d breadcrumb=%d\n", irq_nr,
+		  READ_BREADCRUMB(dev_priv));
+
+	if (READ_BREADCRUMB(dev_priv) >= irq_nr) {
+		if (master_priv->sarea_priv)
+			master_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
+		return 0;
+	}
+
+	if (master_priv->sarea_priv)
+		master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
+
+	if (ring->irq_get(ring)) {
+		DRM_WAIT_ON(ret, ring->irq_queue, 3 * DRM_HZ,
+			    READ_BREADCRUMB(dev_priv) >= irq_nr);
+		ring->irq_put(ring);
+	} else if (wait_for(READ_BREADCRUMB(dev_priv) >= irq_nr, 3000))
+		ret = -EBUSY;
+
+	if (ret == -EBUSY) {
+		DRM_ERROR("EBUSY -- rec: %d emitted: %d\n",
+			  READ_BREADCRUMB(dev_priv), (int)dev_priv->counter);
+	}
+
+	return ret;
+}
+
+/* Needs the lock as it touches the ring.
+ */
+int i915_irq_emit(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	drm_i915_irq_emit_t *emit = data;
+	int result;
+
+	if (!dev_priv || !LP_RING(dev_priv)->virtual_start) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
+
+	mutex_lock(&dev->struct_mutex);
+	result = i915_emit_irq(dev);
+	mutex_unlock(&dev->struct_mutex);
+
+	if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) {
+		DRM_ERROR("copy_to_user\n");
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+/* Doesn't need the hardware lock.
+ */
+int i915_irq_wait(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	drm_i915_irq_wait_t *irqwait = data;
+
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	return i915_wait_irq(dev, irqwait->irq_seq);
+}
+
+/* Called from drm generic code, passed 'crtc' which
+ * we use as a pipe index
+ */
+static int i915_enable_vblank(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	unsigned long irqflags;
+
+	if (!i915_pipe_enabled(dev, pipe))
+		return -EINVAL;
+
+	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	if (INTEL_INFO(dev)->gen >= 4)
+		i915_enable_pipestat(dev_priv, pipe,
+				     PIPE_START_VBLANK_INTERRUPT_ENABLE);
+	else
+		i915_enable_pipestat(dev_priv, pipe,
+				     PIPE_VBLANK_INTERRUPT_ENABLE);
+
+	/* maintain vblank delivery even in deep C-states */
+	if (dev_priv->info->gen == 3)
+		I915_WRITE(INSTPM, INSTPM_AGPBUSY_DIS << 16);
+	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+
+	return 0;
+}
+
+static int ironlake_enable_vblank(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	unsigned long irqflags;
+
+	if (!i915_pipe_enabled(dev, pipe))
+		return -EINVAL;
+
+	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	ironlake_enable_display_irq(dev_priv, (pipe == 0) ?
+				    DE_PIPEA_VBLANK : DE_PIPEB_VBLANK);
+	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+
+	return 0;
+}
+
+static int ivybridge_enable_vblank(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	unsigned long irqflags;
+
+	if (!i915_pipe_enabled(dev, pipe))
+		return -EINVAL;
+
+	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	ironlake_enable_display_irq(dev_priv, (pipe == 0) ?
+				    DE_PIPEA_VBLANK_IVB : DE_PIPEB_VBLANK_IVB);
+	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+
+	return 0;
+}
+
+/* Called from drm generic code, passed 'crtc' which
+ * we use as a pipe index
+ */
+static void i915_disable_vblank(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	if (dev_priv->info->gen == 3)
+		I915_WRITE(INSTPM,
+			   INSTPM_AGPBUSY_DIS << 16 | INSTPM_AGPBUSY_DIS);
+
+	i915_disable_pipestat(dev_priv, pipe,
+			      PIPE_VBLANK_INTERRUPT_ENABLE |
+			      PIPE_START_VBLANK_INTERRUPT_ENABLE);
+	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+}
+
+static void ironlake_disable_vblank(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	ironlake_disable_display_irq(dev_priv, (pipe == 0) ?
+				     DE_PIPEA_VBLANK : DE_PIPEB_VBLANK);
+	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+}
+
+static void ivybridge_disable_vblank(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	ironlake_disable_display_irq(dev_priv, (pipe == 0) ?
+				     DE_PIPEA_VBLANK_IVB : DE_PIPEB_VBLANK_IVB);
+	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+}
+
+/* Set the vblank monitor pipe
+ */
+int i915_vblank_pipe_set(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int i915_vblank_pipe_get(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	drm_i915_vblank_pipe_t *pipe = data;
+
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
+
+	return 0;
+}
+
+/**
+ * Schedule buffer swap at given vertical blank.
+ */
+int i915_vblank_swap(struct drm_device *dev, void *data,
+		     struct drm_file *file_priv)
+{
+	/* The delayed swap mechanism was fundamentally racy, and has been
+	 * removed.  The model was that the client requested a delayed flip/swap
+	 * from the kernel, then waited for vblank before continuing to perform
+	 * rendering.  The problem was that the kernel might wake the client
+	 * up before it dispatched the vblank swap (since the lock has to be
+	 * held while touching the ringbuffer), in which case the client would
+	 * clear and start the next frame before the swap occurred, and
+	 * flicker would occur in addition to likely missing the vblank.
+	 *
+	 * In the absence of this ioctl, userland falls back to a correct path
+	 * of waiting for a vblank, then dispatching the swap on its own.
+	 * Context switching to userland and back is plenty fast enough for
+	 * meeting the requirements of vblank swapping.
+	 */
+	return -EINVAL;
+}
+
+static u32
+ring_last_seqno(struct intel_ring_buffer *ring)
+{
+	return list_entry(ring->request_list.prev,
+			  struct drm_i915_gem_request, list)->seqno;
+}
+
+static bool i915_hangcheck_ring_idle(struct intel_ring_buffer *ring, bool *err)
+{
+	if (list_empty(&ring->request_list) ||
+	    i915_seqno_passed(ring->get_seqno(ring), ring_last_seqno(ring))) {
+		/* Issue a wake-up to catch stuck h/w. */
+		if (ring->waiting_seqno && waitqueue_active(&ring->irq_queue)) {
+			DRM_ERROR("Hangcheck timer elapsed... %s idle [waiting on %d, at %d], missed IRQ?\n",
+				  ring->name,
+				  ring->waiting_seqno,
+				  ring->get_seqno(ring));
+			wake_up_all(&ring->irq_queue);
+			*err = true;
+		}
+		return true;
+	}
+	return false;
+}
+
+static bool kick_ring(struct intel_ring_buffer *ring)
+{
+	struct drm_device *dev = ring->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 tmp = I915_READ_CTL(ring);
+	if (tmp & RING_WAIT) {
+		DRM_ERROR("Kicking stuck wait on %s\n",
+			  ring->name);
+		I915_WRITE_CTL(ring, tmp);
+		return true;
+	}
+	return false;
+}
+
+/**
+ * This is called when the chip hasn't reported back with completed
+ * batchbuffers in a long time. The first time this is called we simply record
+ * ACTHD. If ACTHD hasn't changed by the time the hangcheck timer elapses
+ * again, we assume the chip is wedged and try to fix it.
+ */
+void i915_hangcheck_elapsed(unsigned long data)
+{
+	struct drm_device *dev = (struct drm_device *)data;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	uint32_t acthd, instdone, instdone1, acthd_bsd, acthd_blt;
+	bool err = false;
+
+	if (!i915_enable_hangcheck)
+		return;
+
+	/* If all work is done then ACTHD clearly hasn't advanced. */
+	if (i915_hangcheck_ring_idle(&dev_priv->ring[RCS], &err) &&
+	    i915_hangcheck_ring_idle(&dev_priv->ring[VCS], &err) &&
+	    i915_hangcheck_ring_idle(&dev_priv->ring[BCS], &err)) {
+		dev_priv->hangcheck_count = 0;
+		if (err)
+			goto repeat;
+		return;
+	}
+
+	if (INTEL_INFO(dev)->gen < 4) {
+		instdone = I915_READ(INSTDONE);
+		instdone1 = 0;
+	} else {
+		instdone = I915_READ(INSTDONE_I965);
+		instdone1 = I915_READ(INSTDONE1);
+	}
+	acthd = intel_ring_get_active_head(&dev_priv->ring[RCS]);
+	acthd_bsd = HAS_BSD(dev) ?
+		intel_ring_get_active_head(&dev_priv->ring[VCS]) : 0;
+	acthd_blt = HAS_BLT(dev) ?
+		intel_ring_get_active_head(&dev_priv->ring[BCS]) : 0;
+
+	if (dev_priv->last_acthd == acthd &&
+	    dev_priv->last_acthd_bsd == acthd_bsd &&
+	    dev_priv->last_acthd_blt == acthd_blt &&
+	    dev_priv->last_instdone == instdone &&
+	    dev_priv->last_instdone1 == instdone1) {
+		if (dev_priv->hangcheck_count++ > 1) {
+			DRM_ERROR("Hangcheck timer elapsed... GPU hung\n");
+			i915_handle_error(dev, true);
+
+			if (!IS_GEN2(dev)) {
+				/* Is the chip hanging on a WAIT_FOR_EVENT?
+				 * If so we can simply poke the RB_WAIT bit
+				 * and break the hang. This should work on
+				 * all but the second generation chipsets.
+				 */
+				if (kick_ring(&dev_priv->ring[RCS]))
+					goto repeat;
+
+				if (HAS_BSD(dev) &&
+				    kick_ring(&dev_priv->ring[VCS]))
+					goto repeat;
+
+				if (HAS_BLT(dev) &&
+				    kick_ring(&dev_priv->ring[BCS]))
+					goto repeat;
+			}
+
+			return;
+		}
+	} else {
+		dev_priv->hangcheck_count = 0;
+
+		dev_priv->last_acthd = acthd;
+		dev_priv->last_acthd_bsd = acthd_bsd;
+		dev_priv->last_acthd_blt = acthd_blt;
+		dev_priv->last_instdone = instdone;
+		dev_priv->last_instdone1 = instdone1;
+	}
+
+repeat:
+	/* Reset timer case chip hangs without another request being added */
+	mod_timer(&dev_priv->hangcheck_timer,
+		  jiffies + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
+}
+
+/* drm_dma.h hooks
+*/
+static void ironlake_irq_preinstall(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+
+	atomic_set(&dev_priv->irq_received, 0);
+
+	INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
+	INIT_WORK(&dev_priv->error_work, i915_error_work_func);
+	if (IS_GEN6(dev) || IS_IVYBRIDGE(dev))
+		INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work);
+
+	I915_WRITE(HWSTAM, 0xeffe);
+
+	/* XXX hotplug from PCH */
+
+	I915_WRITE(DEIMR, 0xffffffff);
+	I915_WRITE(DEIER, 0x0);
+	POSTING_READ(DEIER);
+
+	/* and GT */
+	I915_WRITE(GTIMR, 0xffffffff);
+	I915_WRITE(GTIER, 0x0);
+	POSTING_READ(GTIER);
+
+	/* south display irq */
+	I915_WRITE(SDEIMR, 0xffffffff);
+	I915_WRITE(SDEIER, 0x0);
+	POSTING_READ(SDEIER);
+}
+
+/*
+ * Enable digital hotplug on the PCH, and configure the DP short pulse
+ * duration to 2ms (which is the minimum in the Display Port spec)
+ *
+ * This register is the same on all known PCH chips.
+ */
+
+static void ironlake_enable_pch_hotplug(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	u32	hotplug;
+
+	hotplug = I915_READ(PCH_PORT_HOTPLUG);
+	hotplug &= ~(PORTD_PULSE_DURATION_MASK|PORTC_PULSE_DURATION_MASK|PORTB_PULSE_DURATION_MASK);
+	hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms;
+	hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms;
+	hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms;
+	I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
+}
+
+static int ironlake_irq_postinstall(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	/* enable kind of interrupts always enabled */
+	u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
+			   DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
+	u32 render_irqs;
+	u32 hotplug_mask;
+
+	DRM_INIT_WAITQUEUE(&dev_priv->ring[RCS].irq_queue);
+	if (HAS_BSD(dev))
+		DRM_INIT_WAITQUEUE(&dev_priv->ring[VCS].irq_queue);
+	if (HAS_BLT(dev))
+		DRM_INIT_WAITQUEUE(&dev_priv->ring[BCS].irq_queue);
+
+	dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
+	dev_priv->irq_mask = ~display_mask;
+
+	/* should always can generate irq */
+	I915_WRITE(DEIIR, I915_READ(DEIIR));
+	I915_WRITE(DEIMR, dev_priv->irq_mask);
+	I915_WRITE(DEIER, display_mask | DE_PIPEA_VBLANK | DE_PIPEB_VBLANK);
+	POSTING_READ(DEIER);
+
+	dev_priv->gt_irq_mask = ~0;
+
+	I915_WRITE(GTIIR, I915_READ(GTIIR));
+	I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+
+	if (IS_GEN6(dev))
+		render_irqs =
+			GT_USER_INTERRUPT |
+			GT_GEN6_BSD_USER_INTERRUPT |
+			GT_BLT_USER_INTERRUPT;
+	else
+		render_irqs =
+			GT_USER_INTERRUPT |
+			GT_PIPE_NOTIFY |
+			GT_BSD_USER_INTERRUPT;
+	I915_WRITE(GTIER, render_irqs);
+	POSTING_READ(GTIER);
+
+	if (HAS_PCH_CPT(dev)) {
+		hotplug_mask = (SDE_CRT_HOTPLUG_CPT |
+				SDE_PORTB_HOTPLUG_CPT |
+				SDE_PORTC_HOTPLUG_CPT |
+				SDE_PORTD_HOTPLUG_CPT);
+	} else {
+		hotplug_mask = (SDE_CRT_HOTPLUG |
+				SDE_PORTB_HOTPLUG |
+				SDE_PORTC_HOTPLUG |
+				SDE_PORTD_HOTPLUG |
+				SDE_AUX_MASK);
+	}
+
+	dev_priv->pch_irq_mask = ~hotplug_mask;
+
+	I915_WRITE(SDEIIR, I915_READ(SDEIIR));
+	I915_WRITE(SDEIMR, dev_priv->pch_irq_mask);
+	I915_WRITE(SDEIER, hotplug_mask);
+	POSTING_READ(SDEIER);
+
+	ironlake_enable_pch_hotplug(dev);
+
+	if (IS_IRONLAKE_M(dev)) {
+		/* Clear & enable PCU event interrupts */
+		I915_WRITE(DEIIR, DE_PCU_EVENT);
+		I915_WRITE(DEIER, I915_READ(DEIER) | DE_PCU_EVENT);
+		ironlake_enable_display_irq(dev_priv, DE_PCU_EVENT);
+	}
+
+	return 0;
+}
+
+static int ivybridge_irq_postinstall(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	/* enable kind of interrupts always enabled */
+	u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE_IVB |
+		DE_PCH_EVENT_IVB | DE_PLANEA_FLIP_DONE_IVB |
+		DE_PLANEB_FLIP_DONE_IVB;
+	u32 render_irqs;
+	u32 hotplug_mask;
+
+	DRM_INIT_WAITQUEUE(&dev_priv->ring[RCS].irq_queue);
+	if (HAS_BSD(dev))
+		DRM_INIT_WAITQUEUE(&dev_priv->ring[VCS].irq_queue);
+	if (HAS_BLT(dev))
+		DRM_INIT_WAITQUEUE(&dev_priv->ring[BCS].irq_queue);
+
+	dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
+	dev_priv->irq_mask = ~display_mask;
+
+	/* should always can generate irq */
+	I915_WRITE(DEIIR, I915_READ(DEIIR));
+	I915_WRITE(DEIMR, dev_priv->irq_mask);
+	I915_WRITE(DEIER, display_mask | DE_PIPEA_VBLANK_IVB |
+		   DE_PIPEB_VBLANK_IVB);
+	POSTING_READ(DEIER);
+
+	dev_priv->gt_irq_mask = ~0;
+
+	I915_WRITE(GTIIR, I915_READ(GTIIR));
+	I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+
+	render_irqs = GT_USER_INTERRUPT | GT_GEN6_BSD_USER_INTERRUPT |
+		GT_BLT_USER_INTERRUPT;
+	I915_WRITE(GTIER, render_irqs);
+	POSTING_READ(GTIER);
+
+	hotplug_mask = (SDE_CRT_HOTPLUG_CPT |
+			SDE_PORTB_HOTPLUG_CPT |
+			SDE_PORTC_HOTPLUG_CPT |
+			SDE_PORTD_HOTPLUG_CPT);
+	dev_priv->pch_irq_mask = ~hotplug_mask;
+
+	I915_WRITE(SDEIIR, I915_READ(SDEIIR));
+	I915_WRITE(SDEIMR, dev_priv->pch_irq_mask);
+	I915_WRITE(SDEIER, hotplug_mask);
+	POSTING_READ(SDEIER);
+
+	ironlake_enable_pch_hotplug(dev);
+
+	return 0;
+}
+
+static void i915_driver_irq_preinstall(struct drm_device * dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	int pipe;
+
+	atomic_set(&dev_priv->irq_received, 0);
+
+	INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
+	INIT_WORK(&dev_priv->error_work, i915_error_work_func);
+
+	if (I915_HAS_HOTPLUG(dev)) {
+		I915_WRITE(PORT_HOTPLUG_EN, 0);
+		I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
+	}
+
+	I915_WRITE(HWSTAM, 0xeffe);
+	for_each_pipe(pipe)
+		I915_WRITE(PIPESTAT(pipe), 0);
+	I915_WRITE(IMR, 0xffffffff);
+	I915_WRITE(IER, 0x0);
+	POSTING_READ(IER);
+}
+
+/*
+ * Must be called after intel_modeset_init or hotplug interrupts won't be
+ * enabled correctly.
+ */
+static int i915_driver_irq_postinstall(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
+	u32 error_mask;
+
+	dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
+
+	/* Unmask the interrupts that we always want on. */
+	dev_priv->irq_mask = ~I915_INTERRUPT_ENABLE_FIX;
+
+	dev_priv->pipestat[0] = 0;
+	dev_priv->pipestat[1] = 0;
+
+	if (I915_HAS_HOTPLUG(dev)) {
+		/* Enable in IER... */
+		enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
+		/* and unmask in IMR */
+		dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT;
+	}
+
+	/*
+	 * Enable some error detection, note the instruction error mask
+	 * bit is reserved, so we leave it masked.
+	 */
+	if (IS_G4X(dev)) {
+		error_mask = ~(GM45_ERROR_PAGE_TABLE |
+			       GM45_ERROR_MEM_PRIV |
+			       GM45_ERROR_CP_PRIV |
+			       I915_ERROR_MEMORY_REFRESH);
+	} else {
+		error_mask = ~(I915_ERROR_PAGE_TABLE |
+			       I915_ERROR_MEMORY_REFRESH);
+	}
+	I915_WRITE(EMR, error_mask);
+
+	I915_WRITE(IMR, dev_priv->irq_mask);
+	I915_WRITE(IER, enable_mask);
+	POSTING_READ(IER);
+
+	if (I915_HAS_HOTPLUG(dev)) {
+		u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+
+		/* Note HDMI and DP share bits */
+		if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+			hotplug_en |= HDMID_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+			hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+			hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+		if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
+			hotplug_en |= CRT_HOTPLUG_INT_EN;
+
+			/* Programming the CRT detection parameters tends
+			   to generate a spurious hotplug event about three
+			   seconds later.  So just do it once.
+			*/
+			if (IS_G4X(dev))
+				hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+			hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+		}
+
+		/* Ignore TV since it's buggy */
+
+		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+	}
+
+	intel_opregion_enable_asle(dev);
+
+	return 0;
+}
+
+static void ironlake_irq_uninstall(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+
+	if (!dev_priv)
+		return;
+
+	dev_priv->vblank_pipe = 0;
+
+	I915_WRITE(HWSTAM, 0xffffffff);
+
+	I915_WRITE(DEIMR, 0xffffffff);
+	I915_WRITE(DEIER, 0x0);
+	I915_WRITE(DEIIR, I915_READ(DEIIR));
+
+	I915_WRITE(GTIMR, 0xffffffff);
+	I915_WRITE(GTIER, 0x0);
+	I915_WRITE(GTIIR, I915_READ(GTIIR));
+
+	I915_WRITE(SDEIMR, 0xffffffff);
+	I915_WRITE(SDEIER, 0x0);
+	I915_WRITE(SDEIIR, I915_READ(SDEIIR));
+}
+
+static void i915_driver_irq_uninstall(struct drm_device * dev)
+{
+	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+	int pipe;
+
+	if (!dev_priv)
+		return;
+
+	dev_priv->vblank_pipe = 0;
+
+	if (I915_HAS_HOTPLUG(dev)) {
+		I915_WRITE(PORT_HOTPLUG_EN, 0);
+		I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
+	}
+
+	I915_WRITE(HWSTAM, 0xffffffff);
+	for_each_pipe(pipe)
+		I915_WRITE(PIPESTAT(pipe), 0);
+	I915_WRITE(IMR, 0xffffffff);
+	I915_WRITE(IER, 0x0);
+
+	for_each_pipe(pipe)
+		I915_WRITE(PIPESTAT(pipe),
+			   I915_READ(PIPESTAT(pipe)) & 0x8000ffff);
+	I915_WRITE(IIR, I915_READ(IIR));
+}
+
+void intel_irq_init(struct drm_device *dev)
+{
+	dev->driver->get_vblank_counter = i915_get_vblank_counter;
+	dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
+	if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
+		dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
+		dev->driver->get_vblank_counter = gm45_get_vblank_counter;
+	}
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
+	else
+		dev->driver->get_vblank_timestamp = NULL;
+	dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
+
+	if (IS_IVYBRIDGE(dev)) {
+		/* Share pre & uninstall handlers with ILK/SNB */
+		dev->driver->irq_handler = ivybridge_irq_handler;
+		dev->driver->irq_preinstall = ironlake_irq_preinstall;
+		dev->driver->irq_postinstall = ivybridge_irq_postinstall;
+		dev->driver->irq_uninstall = ironlake_irq_uninstall;
+		dev->driver->enable_vblank = ivybridge_enable_vblank;
+		dev->driver->disable_vblank = ivybridge_disable_vblank;
+	} else if (HAS_PCH_SPLIT(dev)) {
+		dev->driver->irq_handler = ironlake_irq_handler;
+		dev->driver->irq_preinstall = ironlake_irq_preinstall;
+		dev->driver->irq_postinstall = ironlake_irq_postinstall;
+		dev->driver->irq_uninstall = ironlake_irq_uninstall;
+		dev->driver->enable_vblank = ironlake_enable_vblank;
+		dev->driver->disable_vblank = ironlake_disable_vblank;
+	} else {
+		dev->driver->irq_preinstall = i915_driver_irq_preinstall;
+		dev->driver->irq_postinstall = i915_driver_irq_postinstall;
+		dev->driver->irq_uninstall = i915_driver_irq_uninstall;
+		dev->driver->irq_handler = i915_driver_irq_handler;
+		dev->driver->enable_vblank = i915_enable_vblank;
+		dev->driver->disable_vblank = i915_disable_vblank;
+	}
+}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
new file mode 100644
index 00000000..29bfd899
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -0,0 +1,3888 @@
+/* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _I915_REG_H_
+#define _I915_REG_H_
+
+#define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a)))
+
+/*
+ * The Bridge device's PCI config space has information about the
+ * fb aperture size and the amount of pre-reserved memory.
+ * This is all handled in the intel-gtt.ko module. i915.ko only
+ * cares about the vga bit for the vga rbiter.
+ */
+#define INTEL_GMCH_CTRL		0x52
+#define INTEL_GMCH_VGA_DISABLE  (1 << 1)
+
+/* PCI config space */
+
+#define HPLLCC	0xc0 /* 855 only */
+#define   GC_CLOCK_CONTROL_MASK		(0xf << 0)
+#define   GC_CLOCK_133_200		(0 << 0)
+#define   GC_CLOCK_100_200		(1 << 0)
+#define   GC_CLOCK_100_133		(2 << 0)
+#define   GC_CLOCK_166_250		(3 << 0)
+#define GCFGC2	0xda
+#define GCFGC	0xf0 /* 915+ only */
+#define   GC_LOW_FREQUENCY_ENABLE	(1 << 7)
+#define   GC_DISPLAY_CLOCK_190_200_MHZ	(0 << 4)
+#define   GC_DISPLAY_CLOCK_333_MHZ	(4 << 4)
+#define   GC_DISPLAY_CLOCK_MASK		(7 << 4)
+#define   GM45_GC_RENDER_CLOCK_MASK	(0xf << 0)
+#define   GM45_GC_RENDER_CLOCK_266_MHZ	(8 << 0)
+#define   GM45_GC_RENDER_CLOCK_320_MHZ	(9 << 0)
+#define   GM45_GC_RENDER_CLOCK_400_MHZ	(0xb << 0)
+#define   GM45_GC_RENDER_CLOCK_533_MHZ	(0xc << 0)
+#define   I965_GC_RENDER_CLOCK_MASK	(0xf << 0)
+#define   I965_GC_RENDER_CLOCK_267_MHZ	(2 << 0)
+#define   I965_GC_RENDER_CLOCK_333_MHZ	(3 << 0)
+#define   I965_GC_RENDER_CLOCK_444_MHZ	(4 << 0)
+#define   I965_GC_RENDER_CLOCK_533_MHZ	(5 << 0)
+#define   I945_GC_RENDER_CLOCK_MASK	(7 << 0)
+#define   I945_GC_RENDER_CLOCK_166_MHZ	(0 << 0)
+#define   I945_GC_RENDER_CLOCK_200_MHZ	(1 << 0)
+#define   I945_GC_RENDER_CLOCK_250_MHZ	(3 << 0)
+#define   I945_GC_RENDER_CLOCK_400_MHZ	(5 << 0)
+#define   I915_GC_RENDER_CLOCK_MASK	(7 << 0)
+#define   I915_GC_RENDER_CLOCK_166_MHZ	(0 << 0)
+#define   I915_GC_RENDER_CLOCK_200_MHZ	(1 << 0)
+#define   I915_GC_RENDER_CLOCK_333_MHZ	(4 << 0)
+#define LBB	0xf4
+
+/* Graphics reset regs */
+#define I965_GDRST 0xc0 /* PCI config register */
+#define ILK_GDSR 0x2ca4 /* MCHBAR offset */
+#define  GRDOM_FULL	(0<<2)
+#define  GRDOM_RENDER	(1<<2)
+#define  GRDOM_MEDIA	(3<<2)
+
+#define GEN6_MBCUNIT_SNPCR	0x900c /* for LLC config */
+#define   GEN6_MBC_SNPCR_SHIFT	21
+#define   GEN6_MBC_SNPCR_MASK	(3<<21)
+#define   GEN6_MBC_SNPCR_MAX	(0<<21)
+#define   GEN6_MBC_SNPCR_MED	(1<<21)
+#define   GEN6_MBC_SNPCR_LOW	(2<<21)
+#define   GEN6_MBC_SNPCR_MIN	(3<<21) /* only 1/16th of the cache is shared */
+
+#define GEN6_MBCTL		0x0907c
+#define   GEN6_MBCTL_ENABLE_BOOT_FETCH	(1 << 4)
+#define   GEN6_MBCTL_CTX_FETCH_NEEDED	(1 << 3)
+#define   GEN6_MBCTL_BME_UPDATE_ENABLE	(1 << 2)
+#define   GEN6_MBCTL_MAE_UPDATE_ENABLE	(1 << 1)
+#define   GEN6_MBCTL_BOOT_FETCH_MECH	(1 << 0)
+
+#define GEN6_GDRST	0x941c
+#define  GEN6_GRDOM_FULL		(1 << 0)
+#define  GEN6_GRDOM_RENDER		(1 << 1)
+#define  GEN6_GRDOM_MEDIA		(1 << 2)
+#define  GEN6_GRDOM_BLT			(1 << 3)
+
+/* PPGTT stuff */
+#define GEN6_GTT_ADDR_ENCODE(addr)	((addr) | (((addr) >> 28) & 0xff0))
+
+#define GEN6_PDE_VALID			(1 << 0)
+#define GEN6_PDE_LARGE_PAGE		(2 << 0) /* use 32kb pages */
+/* gen6+ has bit 11-4 for physical addr bit 39-32 */
+#define GEN6_PDE_ADDR_ENCODE(addr)	GEN6_GTT_ADDR_ENCODE(addr)
+
+#define GEN6_PTE_VALID			(1 << 0)
+#define GEN6_PTE_UNCACHED		(1 << 1)
+#define GEN6_PTE_CACHE_LLC		(2 << 1)
+#define GEN6_PTE_CACHE_LLC_MLC		(3 << 1)
+#define GEN6_PTE_CACHE_BITS		(3 << 1)
+#define GEN6_PTE_GFDT			(1 << 3)
+#define GEN6_PTE_ADDR_ENCODE(addr)	GEN6_GTT_ADDR_ENCODE(addr)
+
+#define RING_PP_DIR_BASE(ring)		((ring)->mmio_base+0x228)
+#define RING_PP_DIR_BASE_READ(ring)	((ring)->mmio_base+0x518)
+#define RING_PP_DIR_DCLV(ring)		((ring)->mmio_base+0x220)
+#define   PP_DIR_DCLV_2G		0xffffffff
+
+#define GAM_ECOCHK			0x4090
+#define   ECOCHK_SNB_BIT		(1<<10)
+#define   ECOCHK_PPGTT_CACHE64B		(0x3<<3)
+#define   ECOCHK_PPGTT_CACHE4B		(0x0<<3)
+
+/* VGA stuff */
+
+#define VGA_ST01_MDA 0x3ba
+#define VGA_ST01_CGA 0x3da
+
+#define VGA_MSR_WRITE 0x3c2
+#define VGA_MSR_READ 0x3cc
+#define   VGA_MSR_MEM_EN (1<<1)
+#define   VGA_MSR_CGA_MODE (1<<0)
+
+#define VGA_SR_INDEX 0x3c4
+#define VGA_SR_DATA 0x3c5
+
+#define VGA_AR_INDEX 0x3c0
+#define   VGA_AR_VID_EN (1<<5)
+#define VGA_AR_DATA_WRITE 0x3c0
+#define VGA_AR_DATA_READ 0x3c1
+
+#define VGA_GR_INDEX 0x3ce
+#define VGA_GR_DATA 0x3cf
+/* GR05 */
+#define   VGA_GR_MEM_READ_MODE_SHIFT 3
+#define     VGA_GR_MEM_READ_MODE_PLANE 1
+/* GR06 */
+#define   VGA_GR_MEM_MODE_MASK 0xc
+#define   VGA_GR_MEM_MODE_SHIFT 2
+#define   VGA_GR_MEM_A0000_AFFFF 0
+#define   VGA_GR_MEM_A0000_BFFFF 1
+#define   VGA_GR_MEM_B0000_B7FFF 2
+#define   VGA_GR_MEM_B0000_BFFFF 3
+
+#define VGA_DACMASK 0x3c6
+#define VGA_DACRX 0x3c7
+#define VGA_DACWX 0x3c8
+#define VGA_DACDATA 0x3c9
+
+#define VGA_CR_INDEX_MDA 0x3b4
+#define VGA_CR_DATA_MDA 0x3b5
+#define VGA_CR_INDEX_CGA 0x3d4
+#define VGA_CR_DATA_CGA 0x3d5
+
+/*
+ * Memory interface instructions used by the kernel
+ */
+#define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags))
+
+#define MI_NOOP			MI_INSTR(0, 0)
+#define MI_USER_INTERRUPT	MI_INSTR(0x02, 0)
+#define MI_WAIT_FOR_EVENT       MI_INSTR(0x03, 0)
+#define   MI_WAIT_FOR_OVERLAY_FLIP	(1<<16)
+#define   MI_WAIT_FOR_PLANE_B_FLIP      (1<<6)
+#define   MI_WAIT_FOR_PLANE_A_FLIP      (1<<2)
+#define   MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1)
+#define MI_FLUSH		MI_INSTR(0x04, 0)
+#define   MI_READ_FLUSH		(1 << 0)
+#define   MI_EXE_FLUSH		(1 << 1)
+#define   MI_NO_WRITE_FLUSH	(1 << 2)
+#define   MI_SCENE_COUNT	(1 << 3) /* just increment scene count */
+#define   MI_END_SCENE		(1 << 4) /* flush binner and incr scene count */
+#define   MI_INVALIDATE_ISP	(1 << 5) /* invalidate indirect state pointers */
+#define MI_BATCH_BUFFER_END	MI_INSTR(0x0a, 0)
+#define MI_SUSPEND_FLUSH	MI_INSTR(0x0b, 0)
+#define   MI_SUSPEND_FLUSH_EN	(1<<0)
+#define MI_REPORT_HEAD		MI_INSTR(0x07, 0)
+#define MI_OVERLAY_FLIP		MI_INSTR(0x11, 0)
+#define   MI_OVERLAY_CONTINUE	(0x0<<21)
+#define   MI_OVERLAY_ON		(0x1<<21)
+#define   MI_OVERLAY_OFF	(0x2<<21)
+#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
+#define MI_DISPLAY_FLIP		MI_INSTR(0x14, 2)
+#define MI_DISPLAY_FLIP_I915	MI_INSTR(0x14, 1)
+#define   MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
+#define MI_SET_CONTEXT		MI_INSTR(0x18, 0)
+#define   MI_MM_SPACE_GTT		(1<<8)
+#define   MI_MM_SPACE_PHYSICAL		(0<<8)
+#define   MI_SAVE_EXT_STATE_EN		(1<<3)
+#define   MI_RESTORE_EXT_STATE_EN	(1<<2)
+#define   MI_FORCE_RESTORE		(1<<1)
+#define   MI_RESTORE_INHIBIT		(1<<0)
+#define MI_STORE_DWORD_IMM	MI_INSTR(0x20, 1)
+#define   MI_MEM_VIRTUAL	(1 << 22) /* 965+ only */
+#define MI_STORE_DWORD_INDEX	MI_INSTR(0x21, 1)
+#define   MI_STORE_DWORD_INDEX_SHIFT 2
+/* Official intel docs are somewhat sloppy concerning MI_LOAD_REGISTER_IMM:
+ * - Always issue a MI_NOOP _before_ the MI_LOAD_REGISTER_IMM - otherwise hw
+ *   simply ignores the register load under certain conditions.
+ * - One can actually load arbitrary many arbitrary registers: Simply issue x
+ *   address/value pairs. Don't overdue it, though, x <= 2^4 must hold!
+ */
+#define MI_LOAD_REGISTER_IMM(x)	MI_INSTR(0x22, 2*x-1)
+#define MI_FLUSH_DW		MI_INSTR(0x26, 1) /* for GEN6 */
+#define   MI_INVALIDATE_TLB	(1<<18)
+#define   MI_INVALIDATE_BSD	(1<<7)
+#define MI_BATCH_BUFFER		MI_INSTR(0x30, 1)
+#define   MI_BATCH_NON_SECURE	(1)
+#define   MI_BATCH_NON_SECURE_I965 (1<<8)
+#define MI_BATCH_BUFFER_START	MI_INSTR(0x31, 0)
+#define MI_SEMAPHORE_MBOX	MI_INSTR(0x16, 1) /* gen6+ */
+#define  MI_SEMAPHORE_GLOBAL_GTT    (1<<22)
+#define  MI_SEMAPHORE_UPDATE	    (1<<21)
+#define  MI_SEMAPHORE_COMPARE	    (1<<20)
+#define  MI_SEMAPHORE_REGISTER	    (1<<18)
+#define  MI_SEMAPHORE_SYNC_RV	    (2<<16)
+#define  MI_SEMAPHORE_SYNC_RB	    (0<<16)
+#define  MI_SEMAPHORE_SYNC_VR	    (0<<16)
+#define  MI_SEMAPHORE_SYNC_VB	    (2<<16)
+#define  MI_SEMAPHORE_SYNC_BR	    (2<<16)
+#define  MI_SEMAPHORE_SYNC_BV	    (0<<16)
+#define  MI_SEMAPHORE_SYNC_INVALID  (1<<0)
+/*
+ * 3D instructions used by the kernel
+ */
+#define GFX_INSTR(opcode, flags) ((0x3 << 29) | ((opcode) << 24) | (flags))
+
+#define GFX_OP_RASTER_RULES    ((0x3<<29)|(0x7<<24))
+#define GFX_OP_SCISSOR         ((0x3<<29)|(0x1c<<24)|(0x10<<19))
+#define   SC_UPDATE_SCISSOR       (0x1<<1)
+#define   SC_ENABLE_MASK          (0x1<<0)
+#define   SC_ENABLE               (0x1<<0)
+#define GFX_OP_LOAD_INDIRECT   ((0x3<<29)|(0x1d<<24)|(0x7<<16))
+#define GFX_OP_SCISSOR_INFO    ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1))
+#define   SCI_YMIN_MASK      (0xffff<<16)
+#define   SCI_XMIN_MASK      (0xffff<<0)
+#define   SCI_YMAX_MASK      (0xffff<<16)
+#define   SCI_XMAX_MASK      (0xffff<<0)
+#define GFX_OP_SCISSOR_ENABLE	 ((0x3<<29)|(0x1c<<24)|(0x10<<19))
+#define GFX_OP_SCISSOR_RECT	 ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1)
+#define GFX_OP_COLOR_FACTOR      ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0)
+#define GFX_OP_STIPPLE           ((0x3<<29)|(0x1d<<24)|(0x83<<16))
+#define GFX_OP_MAP_INFO          ((0x3<<29)|(0x1d<<24)|0x4)
+#define GFX_OP_DESTBUFFER_VARS   ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0)
+#define GFX_OP_DESTBUFFER_INFO	 ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1)
+#define GFX_OP_DRAWRECT_INFO     ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3))
+#define GFX_OP_DRAWRECT_INFO_I965  ((0x7900<<16)|0x2)
+#define SRC_COPY_BLT_CMD                ((2<<29)|(0x43<<22)|4)
+#define XY_SRC_COPY_BLT_CMD		((2<<29)|(0x53<<22)|6)
+#define XY_MONO_SRC_COPY_IMM_BLT	((2<<29)|(0x71<<22)|5)
+#define XY_SRC_COPY_BLT_WRITE_ALPHA	(1<<21)
+#define XY_SRC_COPY_BLT_WRITE_RGB	(1<<20)
+#define   BLT_DEPTH_8			(0<<24)
+#define   BLT_DEPTH_16_565		(1<<24)
+#define   BLT_DEPTH_16_1555		(2<<24)
+#define   BLT_DEPTH_32			(3<<24)
+#define   BLT_ROP_GXCOPY		(0xcc<<16)
+#define XY_SRC_COPY_BLT_SRC_TILED	(1<<15) /* 965+ only */
+#define XY_SRC_COPY_BLT_DST_TILED	(1<<11) /* 965+ only */
+#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2)
+#define   ASYNC_FLIP                (1<<22)
+#define   DISPLAY_PLANE_A           (0<<20)
+#define   DISPLAY_PLANE_B           (1<<20)
+#define GFX_OP_PIPE_CONTROL(len)	((0x3<<29)|(0x3<<27)|(0x2<<24)|(len-2))
+#define   PIPE_CONTROL_CS_STALL				(1<<20)
+#define   PIPE_CONTROL_QW_WRITE				(1<<14)
+#define   PIPE_CONTROL_DEPTH_STALL			(1<<13)
+#define   PIPE_CONTROL_WRITE_FLUSH			(1<<12)
+#define   PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH	(1<<12) /* gen6+ */
+#define   PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE	(1<<11) /* MBZ on Ironlake */
+#define   PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE		(1<<10) /* GM45+ only */
+#define   PIPE_CONTROL_INDIRECT_STATE_DISABLE		(1<<9)
+#define   PIPE_CONTROL_NOTIFY				(1<<8)
+#define   PIPE_CONTROL_VF_CACHE_INVALIDATE		(1<<4)
+#define   PIPE_CONTROL_CONST_CACHE_INVALIDATE		(1<<3)
+#define   PIPE_CONTROL_STATE_CACHE_INVALIDATE		(1<<2)
+#define   PIPE_CONTROL_STALL_AT_SCOREBOARD		(1<<1)
+#define   PIPE_CONTROL_DEPTH_CACHE_FLUSH		(1<<0)
+#define   PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */
+
+
+/*
+ * Reset registers
+ */
+#define DEBUG_RESET_I830		0x6070
+#define  DEBUG_RESET_FULL		(1<<7)
+#define  DEBUG_RESET_RENDER		(1<<8)
+#define  DEBUG_RESET_DISPLAY		(1<<9)
+
+
+/*
+ * Fence registers
+ */
+#define FENCE_REG_830_0			0x2000
+#define FENCE_REG_945_8			0x3000
+#define   I830_FENCE_START_MASK		0x07f80000
+#define   I830_FENCE_TILING_Y_SHIFT	12
+#define   I830_FENCE_SIZE_BITS(size)	((ffs((size) >> 19) - 1) << 8)
+#define   I830_FENCE_PITCH_SHIFT	4
+#define   I830_FENCE_REG_VALID		(1<<0)
+#define   I915_FENCE_MAX_PITCH_VAL	4
+#define   I830_FENCE_MAX_PITCH_VAL	6
+#define   I830_FENCE_MAX_SIZE_VAL	(1<<8)
+
+#define   I915_FENCE_START_MASK		0x0ff00000
+#define   I915_FENCE_SIZE_BITS(size)	((ffs((size) >> 20) - 1) << 8)
+
+#define FENCE_REG_965_0			0x03000
+#define   I965_FENCE_PITCH_SHIFT	2
+#define   I965_FENCE_TILING_Y_SHIFT	1
+#define   I965_FENCE_REG_VALID		(1<<0)
+#define   I965_FENCE_MAX_PITCH_VAL	0x0400
+
+#define FENCE_REG_SANDYBRIDGE_0		0x100000
+#define   SANDYBRIDGE_FENCE_PITCH_SHIFT	32
+
+/* control register for cpu gtt access */
+#define TILECTL				0x101000
+#define   TILECTL_SWZCTL			(1 << 0)
+#define   TILECTL_TLB_PREFETCH_DIS	(1 << 2)
+#define   TILECTL_BACKSNOOP_DIS		(1 << 3)
+
+/*
+ * Instruction and interrupt control regs
+ */
+#define PGTBL_ER	0x02024
+#define RENDER_RING_BASE	0x02000
+#define BSD_RING_BASE		0x04000
+#define GEN6_BSD_RING_BASE	0x12000
+#define BLT_RING_BASE		0x22000
+#define RING_TAIL(base)		((base)+0x30)
+#define RING_HEAD(base)		((base)+0x34)
+#define RING_START(base)	((base)+0x38)
+#define RING_CTL(base)		((base)+0x3c)
+#define RING_SYNC_0(base)	((base)+0x40)
+#define RING_SYNC_1(base)	((base)+0x44)
+#define GEN6_RVSYNC (RING_SYNC_0(RENDER_RING_BASE))
+#define GEN6_RBSYNC (RING_SYNC_1(RENDER_RING_BASE))
+#define GEN6_VRSYNC (RING_SYNC_1(GEN6_BSD_RING_BASE))
+#define GEN6_VBSYNC (RING_SYNC_0(GEN6_BSD_RING_BASE))
+#define GEN6_BRSYNC (RING_SYNC_0(BLT_RING_BASE))
+#define GEN6_BVSYNC (RING_SYNC_1(BLT_RING_BASE))
+#define RING_MAX_IDLE(base)	((base)+0x54)
+#define RING_HWS_PGA(base)	((base)+0x80)
+#define RING_HWS_PGA_GEN6(base)	((base)+0x2080)
+#define ARB_MODE		0x04030
+#define   ARB_MODE_SWIZZLE_SNB	(1<<4)
+#define   ARB_MODE_SWIZZLE_IVB	(1<<5)
+#define   ARB_MODE_ENABLE(x)	GFX_MODE_ENABLE(x)
+#define   ARB_MODE_DISABLE(x)	GFX_MODE_DISABLE(x)
+#define RENDER_HWS_PGA_GEN7	(0x04080)
+#define RING_FAULT_REG(ring)	(0x4094 + 0x100*(ring)->id)
+#define DONE_REG		0x40b0
+#define BSD_HWS_PGA_GEN7	(0x04180)
+#define BLT_HWS_PGA_GEN7	(0x04280)
+#define RING_ACTHD(base)	((base)+0x74)
+#define RING_NOPID(base)	((base)+0x94)
+#define RING_IMR(base)		((base)+0xa8)
+#define   TAIL_ADDR		0x001FFFF8
+#define   HEAD_WRAP_COUNT	0xFFE00000
+#define   HEAD_WRAP_ONE		0x00200000
+#define   HEAD_ADDR		0x001FFFFC
+#define   RING_NR_PAGES		0x001FF000
+#define   RING_REPORT_MASK	0x00000006
+#define   RING_REPORT_64K	0x00000002
+#define   RING_REPORT_128K	0x00000004
+#define   RING_NO_REPORT	0x00000000
+#define   RING_VALID_MASK	0x00000001
+#define   RING_VALID		0x00000001
+#define   RING_INVALID		0x00000000
+#define   RING_WAIT_I8XX	(1<<0) /* gen2, PRBx_HEAD */
+#define   RING_WAIT		(1<<11) /* gen3+, PRBx_CTL */
+#define   RING_WAIT_SEMAPHORE	(1<<10) /* gen6+ */
+#if 0
+#define PRB0_TAIL	0x02030
+#define PRB0_HEAD	0x02034
+#define PRB0_START	0x02038
+#define PRB0_CTL	0x0203c
+#define PRB1_TAIL	0x02040 /* 915+ only */
+#define PRB1_HEAD	0x02044 /* 915+ only */
+#define PRB1_START	0x02048 /* 915+ only */
+#define PRB1_CTL	0x0204c /* 915+ only */
+#endif
+#define IPEIR_I965	0x02064
+#define IPEHR_I965	0x02068
+#define INSTDONE_I965	0x0206c
+#define RING_IPEIR(base)	((base)+0x64)
+#define RING_IPEHR(base)	((base)+0x68)
+#define RING_INSTDONE(base)	((base)+0x6c)
+#define RING_INSTPS(base)	((base)+0x70)
+#define RING_DMA_FADD(base)	((base)+0x78)
+#define RING_INSTPM(base)	((base)+0xc0)
+#define INSTPS		0x02070 /* 965+ only */
+#define INSTDONE1	0x0207c /* 965+ only */
+#define ACTHD_I965	0x02074
+#define HWS_PGA		0x02080
+#define HWS_ADDRESS_MASK	0xfffff000
+#define HWS_START_ADDRESS_SHIFT	4
+#define PWRCTXA		0x2088 /* 965GM+ only */
+#define   PWRCTX_EN	(1<<0)
+#define IPEIR		0x02088
+#define IPEHR		0x0208c
+#define INSTDONE	0x02090
+#define NOPID		0x02094
+#define HWSTAM		0x02098
+
+#define ERROR_GEN6	0x040a0
+
+/* GM45+ chicken bits -- debug workaround bits that may be required
+ * for various sorts of correct behavior.  The top 16 bits of each are
+ * the enables for writing to the corresponding low bit.
+ */
+#define _3D_CHICKEN	0x02084
+#define _3D_CHICKEN2	0x0208c
+/* Disables pipelining of read flushes past the SF-WIZ interface.
+ * Required on all Ironlake steppings according to the B-Spec, but the
+ * particular danger of not doing so is not specified.
+ */
+# define _3D_CHICKEN2_WM_READ_PIPELINED			(1 << 14)
+#define _3D_CHICKEN3	0x02090
+
+#define MI_MODE		0x0209c
+# define VS_TIMER_DISPATCH				(1 << 6)
+# define MI_FLUSH_ENABLE				(1 << 12)
+
+#define GFX_MODE	0x02520
+#define GFX_MODE_GEN7	0x0229c
+#define RING_MODE_GEN7(ring)	((ring)->mmio_base+0x29c)
+#define   GFX_RUN_LIST_ENABLE		(1<<15)
+#define   GFX_TLB_INVALIDATE_ALWAYS	(1<<13)
+#define   GFX_SURFACE_FAULT_ENABLE	(1<<12)
+#define   GFX_REPLAY_MODE		(1<<11)
+#define   GFX_PSMI_GRANULARITY		(1<<10)
+#define   GFX_PPGTT_ENABLE		(1<<9)
+
+#define GFX_MODE_ENABLE(bit) (((bit) << 16) | (bit))
+#define GFX_MODE_DISABLE(bit) (((bit) << 16) | (0))
+
+#define SCPD0		0x0209c /* 915+ only */
+#define IER		0x020a0
+#define IIR		0x020a4
+#define IMR		0x020a8
+#define ISR		0x020ac
+#define   I915_PIPE_CONTROL_NOTIFY_INTERRUPT		(1<<18)
+#define   I915_DISPLAY_PORT_INTERRUPT			(1<<17)
+#define   I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT	(1<<15)
+#define   I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT	(1<<14) /* p-state */
+#define   I915_HWB_OOM_INTERRUPT			(1<<13)
+#define   I915_SYNC_STATUS_INTERRUPT			(1<<12)
+#define   I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT	(1<<11)
+#define   I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT	(1<<10)
+#define   I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT	(1<<9)
+#define   I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT	(1<<8)
+#define   I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT		(1<<7)
+#define   I915_DISPLAY_PIPE_A_EVENT_INTERRUPT		(1<<6)
+#define   I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT		(1<<5)
+#define   I915_DISPLAY_PIPE_B_EVENT_INTERRUPT		(1<<4)
+#define   I915_DEBUG_INTERRUPT				(1<<2)
+#define   I915_USER_INTERRUPT				(1<<1)
+#define   I915_ASLE_INTERRUPT				(1<<0)
+#define   I915_BSD_USER_INTERRUPT                      (1<<25)
+#define EIR		0x020b0
+#define EMR		0x020b4
+#define ESR		0x020b8
+#define   GM45_ERROR_PAGE_TABLE				(1<<5)
+#define   GM45_ERROR_MEM_PRIV				(1<<4)
+#define   I915_ERROR_PAGE_TABLE				(1<<4)
+#define   GM45_ERROR_CP_PRIV				(1<<3)
+#define   I915_ERROR_MEMORY_REFRESH			(1<<1)
+#define   I915_ERROR_INSTRUCTION			(1<<0)
+#define INSTPM	        0x020c0
+#define   INSTPM_SELF_EN (1<<12) /* 915GM only */
+#define   INSTPM_AGPBUSY_DIS (1<<11) /* gen3: when disabled, pending interrupts
+					will not assert AGPBUSY# and will only
+					be delivered when out of C3. */
+#define   INSTPM_FORCE_ORDERING				(1<<7) /* GEN6+ */
+#define ACTHD	        0x020c8
+#define FW_BLC		0x020d8
+#define FW_BLC2		0x020dc
+#define FW_BLC_SELF	0x020e0 /* 915+ only */
+#define   FW_BLC_SELF_EN_MASK      (1<<31)
+#define   FW_BLC_SELF_FIFO_MASK    (1<<16) /* 945 only */
+#define   FW_BLC_SELF_EN           (1<<15) /* 945 only */
+#define MM_BURST_LENGTH     0x00700000
+#define MM_FIFO_WATERMARK   0x0001F000
+#define LM_BURST_LENGTH     0x00000700
+#define LM_FIFO_WATERMARK   0x0000001F
+#define MI_ARB_STATE	0x020e4 /* 915+ only */
+#define   MI_ARB_MASK_SHIFT	  16	/* shift for enable bits */
+
+/* Make render/texture TLB fetches lower priorty than associated data
+ *   fetches. This is not turned on by default
+ */
+#define   MI_ARB_RENDER_TLB_LOW_PRIORITY	(1 << 15)
+
+/* Isoch request wait on GTT enable (Display A/B/C streams).
+ * Make isoch requests stall on the TLB update. May cause
+ * display underruns (test mode only)
+ */
+#define   MI_ARB_ISOCH_WAIT_GTT			(1 << 14)
+
+/* Block grant count for isoch requests when block count is
+ * set to a finite value.
+ */
+#define   MI_ARB_BLOCK_GRANT_MASK		(3 << 12)
+#define   MI_ARB_BLOCK_GRANT_8			(0 << 12)	/* for 3 display planes */
+#define   MI_ARB_BLOCK_GRANT_4			(1 << 12)	/* for 2 display planes */
+#define   MI_ARB_BLOCK_GRANT_2			(2 << 12)	/* for 1 display plane */
+#define   MI_ARB_BLOCK_GRANT_0			(3 << 12)	/* don't use */
+
+/* Enable render writes to complete in C2/C3/C4 power states.
+ * If this isn't enabled, render writes are prevented in low
+ * power states. That seems bad to me.
+ */
+#define   MI_ARB_C3_LP_WRITE_ENABLE		(1 << 11)
+
+/* This acknowledges an async flip immediately instead
+ * of waiting for 2TLB fetches.
+ */
+#define   MI_ARB_ASYNC_FLIP_ACK_IMMEDIATE	(1 << 10)
+
+/* Enables non-sequential data reads through arbiter
+ */
+#define   MI_ARB_DUAL_DATA_PHASE_DISABLE	(1 << 9)
+
+/* Disable FSB snooping of cacheable write cycles from binner/render
+ * command stream
+ */
+#define   MI_ARB_CACHE_SNOOP_DISABLE		(1 << 8)
+
+/* Arbiter time slice for non-isoch streams */
+#define   MI_ARB_TIME_SLICE_MASK		(7 << 5)
+#define   MI_ARB_TIME_SLICE_1			(0 << 5)
+#define   MI_ARB_TIME_SLICE_2			(1 << 5)
+#define   MI_ARB_TIME_SLICE_4			(2 << 5)
+#define   MI_ARB_TIME_SLICE_6			(3 << 5)
+#define   MI_ARB_TIME_SLICE_8			(4 << 5)
+#define   MI_ARB_TIME_SLICE_10			(5 << 5)
+#define   MI_ARB_TIME_SLICE_14			(6 << 5)
+#define   MI_ARB_TIME_SLICE_16			(7 << 5)
+
+/* Low priority grace period page size */
+#define   MI_ARB_LOW_PRIORITY_GRACE_4KB		(0 << 4)	/* default */
+#define   MI_ARB_LOW_PRIORITY_GRACE_8KB		(1 << 4)
+
+/* Disable display A/B trickle feed */
+#define   MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE	(1 << 2)
+
+/* Set display plane priority */
+#define   MI_ARB_DISPLAY_PRIORITY_A_B		(0 << 0)	/* display A > display B */
+#define   MI_ARB_DISPLAY_PRIORITY_B_A		(1 << 0)	/* display B > display A */
+
+#define CACHE_MODE_0	0x02120 /* 915+ only */
+#define   CM0_MASK_SHIFT          16
+#define   CM0_IZ_OPT_DISABLE      (1<<6)
+#define   CM0_ZR_OPT_DISABLE      (1<<5)
+#define	  CM0_STC_EVICT_DISABLE_LRA_SNB	(1<<5)
+#define   CM0_DEPTH_EVICT_DISABLE (1<<4)
+#define   CM0_COLOR_EVICT_DISABLE (1<<3)
+#define   CM0_DEPTH_WRITE_DISABLE (1<<1)
+#define   CM0_RC_OP_FLUSH_DISABLE (1<<0)
+#define BB_ADDR		0x02140 /* 8 bytes */
+#define GFX_FLSH_CNTL	0x02170 /* 915+ only */
+#define ECOSKPD		0x021d0
+#define   ECO_GATING_CX_ONLY	(1<<3)
+#define   ECO_FLIP_DONE		(1<<0)
+
+/* GEN6 interrupt control */
+#define GEN6_RENDER_HWSTAM	0x2098
+#define GEN6_RENDER_IMR		0x20a8
+#define   GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT		(1 << 8)
+#define   GEN6_RENDER_PPGTT_PAGE_FAULT			(1 << 7)
+#define   GEN6_RENDER_TIMEOUT_COUNTER_EXPIRED		(1 << 6)
+#define   GEN6_RENDER_L3_PARITY_ERROR			(1 << 5)
+#define   GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT	(1 << 4)
+#define   GEN6_RENDER_COMMAND_PARSER_MASTER_ERROR	(1 << 3)
+#define   GEN6_RENDER_SYNC_STATUS			(1 << 2)
+#define   GEN6_RENDER_DEBUG_INTERRUPT			(1 << 1)
+#define   GEN6_RENDER_USER_INTERRUPT			(1 << 0)
+
+#define GEN6_BLITTER_HWSTAM	0x22098
+#define GEN6_BLITTER_IMR	0x220a8
+#define   GEN6_BLITTER_MI_FLUSH_DW_NOTIFY_INTERRUPT	(1 << 26)
+#define   GEN6_BLITTER_COMMAND_PARSER_MASTER_ERROR	(1 << 25)
+#define   GEN6_BLITTER_SYNC_STATUS			(1 << 24)
+#define   GEN6_BLITTER_USER_INTERRUPT			(1 << 22)
+
+#define GEN6_BLITTER_ECOSKPD	0x221d0
+#define   GEN6_BLITTER_LOCK_SHIFT			16
+#define   GEN6_BLITTER_FBC_NOTIFY			(1<<3)
+
+#define GEN6_BSD_SLEEP_PSMI_CONTROL	0x12050
+#define   GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK	(1 << 16)
+#define   GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_DISABLE		(1 << 0)
+#define   GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE		0
+#define   GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR			(1 << 3)
+
+#define GEN6_BSD_HWSTAM			0x12098
+#define GEN6_BSD_IMR			0x120a8
+#define   GEN6_BSD_USER_INTERRUPT	(1 << 12)
+
+#define GEN6_BSD_RNCID			0x12198
+
+#define GEN7_FF_THREAD_MODE		0x20a0
+#define   GEN7_FF_SCHED_MASK		0x0077070
+#define   GEN7_FF_TS_SCHED_HS1		(0x5<<16)
+#define   GEN7_FF_TS_SCHED_HS0		(0x3<<16)
+#define   GEN7_FF_TS_SCHED_LOAD_BALANCE	(0x1<<16)
+#define   GEN7_FF_TS_SCHED_HW		(0x0<<16) /* Default */
+#define   GEN7_FF_VS_SCHED_HS1		(0x5<<12)
+#define   GEN7_FF_VS_SCHED_HS0		(0x3<<12)
+#define   GEN7_FF_VS_SCHED_LOAD_BALANCE	(0x1<<12) /* Default */
+#define   GEN7_FF_VS_SCHED_HW		(0x0<<12)
+#define   GEN7_FF_DS_SCHED_HS1		(0x5<<4)
+#define   GEN7_FF_DS_SCHED_HS0		(0x3<<4)
+#define   GEN7_FF_DS_SCHED_LOAD_BALANCE	(0x1<<4)  /* Default */
+#define   GEN7_FF_DS_SCHED_HW		(0x0<<4)
+
+/*
+ * Framebuffer compression (915+ only)
+ */
+
+#define FBC_CFB_BASE		0x03200 /* 4k page aligned */
+#define FBC_LL_BASE		0x03204 /* 4k page aligned */
+#define FBC_CONTROL		0x03208
+#define   FBC_CTL_EN		(1<<31)
+#define   FBC_CTL_PERIODIC	(1<<30)
+#define   FBC_CTL_INTERVAL_SHIFT (16)
+#define   FBC_CTL_UNCOMPRESSIBLE (1<<14)
+#define   FBC_CTL_C3_IDLE	(1<<13)
+#define   FBC_CTL_STRIDE_SHIFT	(5)
+#define   FBC_CTL_FENCENO	(1<<0)
+#define FBC_COMMAND		0x0320c
+#define   FBC_CMD_COMPRESS	(1<<0)
+#define FBC_STATUS		0x03210
+#define   FBC_STAT_COMPRESSING	(1<<31)
+#define   FBC_STAT_COMPRESSED	(1<<30)
+#define   FBC_STAT_MODIFIED	(1<<29)
+#define   FBC_STAT_CURRENT_LINE	(1<<0)
+#define FBC_CONTROL2		0x03214
+#define   FBC_CTL_FENCE_DBL	(0<<4)
+#define   FBC_CTL_IDLE_IMM	(0<<2)
+#define   FBC_CTL_IDLE_FULL	(1<<2)
+#define   FBC_CTL_IDLE_LINE	(2<<2)
+#define   FBC_CTL_IDLE_DEBUG	(3<<2)
+#define   FBC_CTL_CPU_FENCE	(1<<1)
+#define   FBC_CTL_PLANEA	(0<<0)
+#define   FBC_CTL_PLANEB	(1<<0)
+#define FBC_FENCE_OFF		0x0321b
+#define FBC_TAG			0x03300
+
+#define FBC_LL_SIZE		(1536)
+
+/* Framebuffer compression for GM45+ */
+#define DPFC_CB_BASE		0x3200
+#define DPFC_CONTROL		0x3208
+#define   DPFC_CTL_EN		(1<<31)
+#define   DPFC_CTL_PLANEA	(0<<30)
+#define   DPFC_CTL_PLANEB	(1<<30)
+#define   DPFC_CTL_FENCE_EN	(1<<29)
+#define   DPFC_CTL_PERSISTENT_MODE	(1<<25)
+#define   DPFC_SR_EN		(1<<10)
+#define   DPFC_CTL_LIMIT_1X	(0<<6)
+#define   DPFC_CTL_LIMIT_2X	(1<<6)
+#define   DPFC_CTL_LIMIT_4X	(2<<6)
+#define DPFC_RECOMP_CTL		0x320c
+#define   DPFC_RECOMP_STALL_EN	(1<<27)
+#define   DPFC_RECOMP_STALL_WM_SHIFT (16)
+#define   DPFC_RECOMP_STALL_WM_MASK (0x07ff0000)
+#define   DPFC_RECOMP_TIMER_COUNT_SHIFT (0)
+#define   DPFC_RECOMP_TIMER_COUNT_MASK (0x0000003f)
+#define DPFC_STATUS		0x3210
+#define   DPFC_INVAL_SEG_SHIFT  (16)
+#define   DPFC_INVAL_SEG_MASK	(0x07ff0000)
+#define   DPFC_COMP_SEG_SHIFT	(0)
+#define   DPFC_COMP_SEG_MASK	(0x000003ff)
+#define DPFC_STATUS2		0x3214
+#define DPFC_FENCE_YOFF		0x3218
+#define DPFC_CHICKEN		0x3224
+#define   DPFC_HT_MODIFY	(1<<31)
+
+/* Framebuffer compression for Ironlake */
+#define ILK_DPFC_CB_BASE	0x43200
+#define ILK_DPFC_CONTROL	0x43208
+/* The bit 28-8 is reserved */
+#define   DPFC_RESERVED		(0x1FFFFF00)
+#define ILK_DPFC_RECOMP_CTL	0x4320c
+#define ILK_DPFC_STATUS		0x43210
+#define ILK_DPFC_FENCE_YOFF	0x43218
+#define ILK_DPFC_CHICKEN	0x43224
+#define ILK_FBC_RT_BASE		0x2128
+#define   ILK_FBC_RT_VALID	(1<<0)
+
+#define ILK_DISPLAY_CHICKEN1	0x42000
+#define   ILK_FBCQ_DIS		(1<<22)
+#define	  ILK_PABSTRETCH_DIS	(1<<21)
+
+
+/*
+ * Framebuffer compression for Sandybridge
+ *
+ * The following two registers are of type GTTMMADR
+ */
+#define SNB_DPFC_CTL_SA		0x100100
+#define   SNB_CPU_FENCE_ENABLE	(1<<29)
+#define DPFC_CPU_FENCE_OFFSET	0x100104
+
+
+/*
+ * GPIO regs
+ */
+#define GPIOA			0x5010
+#define GPIOB			0x5014
+#define GPIOC			0x5018
+#define GPIOD			0x501c
+#define GPIOE			0x5020
+#define GPIOF			0x5024
+#define GPIOG			0x5028
+#define GPIOH			0x502c
+# define GPIO_CLOCK_DIR_MASK		(1 << 0)
+# define GPIO_CLOCK_DIR_IN		(0 << 1)
+# define GPIO_CLOCK_DIR_OUT		(1 << 1)
+# define GPIO_CLOCK_VAL_MASK		(1 << 2)
+# define GPIO_CLOCK_VAL_OUT		(1 << 3)
+# define GPIO_CLOCK_VAL_IN		(1 << 4)
+# define GPIO_CLOCK_PULLUP_DISABLE	(1 << 5)
+# define GPIO_DATA_DIR_MASK		(1 << 8)
+# define GPIO_DATA_DIR_IN		(0 << 9)
+# define GPIO_DATA_DIR_OUT		(1 << 9)
+# define GPIO_DATA_VAL_MASK		(1 << 10)
+# define GPIO_DATA_VAL_OUT		(1 << 11)
+# define GPIO_DATA_VAL_IN		(1 << 12)
+# define GPIO_DATA_PULLUP_DISABLE	(1 << 13)
+
+#define GMBUS0			0x5100 /* clock/port select */
+#define   GMBUS_RATE_100KHZ	(0<<8)
+#define   GMBUS_RATE_50KHZ	(1<<8)
+#define   GMBUS_RATE_400KHZ	(2<<8) /* reserved on Pineview */
+#define   GMBUS_RATE_1MHZ	(3<<8) /* reserved on Pineview */
+#define   GMBUS_HOLD_EXT	(1<<7) /* 300ns hold time, rsvd on Pineview */
+#define   GMBUS_PORT_DISABLED	0
+#define   GMBUS_PORT_SSC	1
+#define   GMBUS_PORT_VGADDC	2
+#define   GMBUS_PORT_PANEL	3
+#define   GMBUS_PORT_DPC	4 /* HDMIC */
+#define   GMBUS_PORT_DPB	5 /* SDVO, HDMIB */
+				  /* 6 reserved */
+#define   GMBUS_PORT_DPD	7 /* HDMID */
+#define   GMBUS_NUM_PORTS       8
+#define GMBUS1			0x5104 /* command/status */
+#define   GMBUS_SW_CLR_INT	(1<<31)
+#define   GMBUS_SW_RDY		(1<<30)
+#define   GMBUS_ENT		(1<<29) /* enable timeout */
+#define   GMBUS_CYCLE_NONE	(0<<25)
+#define   GMBUS_CYCLE_WAIT	(1<<25)
+#define   GMBUS_CYCLE_INDEX	(2<<25)
+#define   GMBUS_CYCLE_STOP	(4<<25)
+#define   GMBUS_BYTE_COUNT_SHIFT 16
+#define   GMBUS_SLAVE_INDEX_SHIFT 8
+#define   GMBUS_SLAVE_ADDR_SHIFT 1
+#define   GMBUS_SLAVE_READ	(1<<0)
+#define   GMBUS_SLAVE_WRITE	(0<<0)
+#define GMBUS2			0x5108 /* status */
+#define   GMBUS_INUSE		(1<<15)
+#define   GMBUS_HW_WAIT_PHASE	(1<<14)
+#define   GMBUS_STALL_TIMEOUT	(1<<13)
+#define   GMBUS_INT		(1<<12)
+#define   GMBUS_HW_RDY		(1<<11)
+#define   GMBUS_SATOER		(1<<10)
+#define   GMBUS_ACTIVE		(1<<9)
+#define GMBUS3			0x510c /* data buffer bytes 3-0 */
+#define GMBUS4			0x5110 /* interrupt mask (Pineview+) */
+#define   GMBUS_SLAVE_TIMEOUT_EN (1<<4)
+#define   GMBUS_NAK_EN		(1<<3)
+#define   GMBUS_IDLE_EN		(1<<2)
+#define   GMBUS_HW_WAIT_EN	(1<<1)
+#define   GMBUS_HW_RDY_EN	(1<<0)
+#define GMBUS5			0x5120 /* byte index */
+#define   GMBUS_2BYTE_INDEX_EN	(1<<31)
+
+/*
+ * Clock control & power management
+ */
+
+#define VGA0	0x6000
+#define VGA1	0x6004
+#define VGA_PD	0x6010
+#define   VGA0_PD_P2_DIV_4	(1 << 7)
+#define   VGA0_PD_P1_DIV_2	(1 << 5)
+#define   VGA0_PD_P1_SHIFT	0
+#define   VGA0_PD_P1_MASK	(0x1f << 0)
+#define   VGA1_PD_P2_DIV_4	(1 << 15)
+#define   VGA1_PD_P1_DIV_2	(1 << 13)
+#define   VGA1_PD_P1_SHIFT	8
+#define   VGA1_PD_P1_MASK	(0x1f << 8)
+#define _DPLL_A	0x06014
+#define _DPLL_B	0x06018
+#define DPLL(pipe) _PIPE(pipe, _DPLL_A, _DPLL_B)
+#define   DPLL_VCO_ENABLE		(1 << 31)
+#define   DPLL_DVO_HIGH_SPEED		(1 << 30)
+#define   DPLL_SYNCLOCK_ENABLE		(1 << 29)
+#define   DPLL_VGA_MODE_DIS		(1 << 28)
+#define   DPLLB_MODE_DAC_SERIAL		(1 << 26) /* i915 */
+#define   DPLLB_MODE_LVDS		(2 << 26) /* i915 */
+#define   DPLL_MODE_MASK		(3 << 26)
+#define   DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */
+#define   DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */
+#define   DPLLB_LVDS_P2_CLOCK_DIV_14	(0 << 24) /* i915 */
+#define   DPLLB_LVDS_P2_CLOCK_DIV_7	(1 << 24) /* i915 */
+#define   DPLL_P2_CLOCK_DIV_MASK	0x03000000 /* i915 */
+#define   DPLL_FPA01_P1_POST_DIV_MASK	0x00ff0000 /* i915 */
+#define   DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW	0x00ff8000 /* Pineview */
+
+#define SRX_INDEX		0x3c4
+#define SRX_DATA		0x3c5
+#define SR01			1
+#define SR01_SCREEN_OFF		(1<<5)
+
+#define PPCR			0x61204
+#define PPCR_ON			(1<<0)
+
+#define DVOB			0x61140
+#define DVOB_ON			(1<<31)
+#define DVOC			0x61160
+#define DVOC_ON			(1<<31)
+#define LVDS			0x61180
+#define LVDS_ON			(1<<31)
+
+/* Scratch pad debug 0 reg:
+ */
+#define   DPLL_FPA01_P1_POST_DIV_MASK_I830	0x001f0000
+/*
+ * The i830 generation, in LVDS mode, defines P1 as the bit number set within
+ * this field (only one bit may be set).
+ */
+#define   DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS	0x003f0000
+#define   DPLL_FPA01_P1_POST_DIV_SHIFT	16
+#define   DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW 15
+/* i830, required in DVO non-gang */
+#define   PLL_P2_DIVIDE_BY_4		(1 << 23)
+#define   PLL_P1_DIVIDE_BY_TWO		(1 << 21) /* i830 */
+#define   PLL_REF_INPUT_DREFCLK		(0 << 13)
+#define   PLL_REF_INPUT_TVCLKINA	(1 << 13) /* i830 */
+#define   PLL_REF_INPUT_TVCLKINBC	(2 << 13) /* SDVO TVCLKIN */
+#define   PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
+#define   PLL_REF_INPUT_MASK		(3 << 13)
+#define   PLL_LOAD_PULSE_PHASE_SHIFT		9
+/* Ironlake */
+# define PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT     9
+# define PLL_REF_SDVO_HDMI_MULTIPLIER_MASK      (7 << 9)
+# define PLL_REF_SDVO_HDMI_MULTIPLIER(x)	(((x)-1) << 9)
+# define DPLL_FPA1_P1_POST_DIV_SHIFT            0
+# define DPLL_FPA1_P1_POST_DIV_MASK             0xff
+
+/*
+ * Parallel to Serial Load Pulse phase selection.
+ * Selects the phase for the 10X DPLL clock for the PCIe
+ * digital display port. The range is 4 to 13; 10 or more
+ * is just a flip delay. The default is 6
+ */
+#define   PLL_LOAD_PULSE_PHASE_MASK		(0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
+#define   DISPLAY_RATE_SELECT_FPA1		(1 << 8)
+/*
+ * SDVO multiplier for 945G/GM. Not used on 965.
+ */
+#define   SDVO_MULTIPLIER_MASK			0x000000ff
+#define   SDVO_MULTIPLIER_SHIFT_HIRES		4
+#define   SDVO_MULTIPLIER_SHIFT_VGA		0
+#define _DPLL_A_MD 0x0601c /* 965+ only */
+/*
+ * UDI pixel divider, controlling how many pixels are stuffed into a packet.
+ *
+ * Value is pixels minus 1.  Must be set to 1 pixel for SDVO.
+ */
+#define   DPLL_MD_UDI_DIVIDER_MASK		0x3f000000
+#define   DPLL_MD_UDI_DIVIDER_SHIFT		24
+/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
+#define   DPLL_MD_VGA_UDI_DIVIDER_MASK		0x003f0000
+#define   DPLL_MD_VGA_UDI_DIVIDER_SHIFT		16
+/*
+ * SDVO/UDI pixel multiplier.
+ *
+ * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
+ * clock rate is 10 times the DPLL clock.  At low resolution/refresh rate
+ * modes, the bus rate would be below the limits, so SDVO allows for stuffing
+ * dummy bytes in the datastream at an increased clock rate, with both sides of
+ * the link knowing how many bytes are fill.
+ *
+ * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
+ * rate to 130Mhz to get a bus rate of 1.30Ghz.  The DPLL clock rate would be
+ * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
+ * through an SDVO command.
+ *
+ * This register field has values of multiplication factor minus 1, with
+ * a maximum multiplier of 5 for SDVO.
+ */
+#define   DPLL_MD_UDI_MULTIPLIER_MASK		0x00003f00
+#define   DPLL_MD_UDI_MULTIPLIER_SHIFT		8
+/*
+ * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
+ * This best be set to the default value (3) or the CRT won't work. No,
+ * I don't entirely understand what this does...
+ */
+#define   DPLL_MD_VGA_UDI_MULTIPLIER_MASK	0x0000003f
+#define   DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT	0
+#define _DPLL_B_MD 0x06020 /* 965+ only */
+#define DPLL_MD(pipe) _PIPE(pipe, _DPLL_A_MD, _DPLL_B_MD)
+#define _FPA0	0x06040
+#define _FPA1	0x06044
+#define _FPB0	0x06048
+#define _FPB1	0x0604c
+#define FP0(pipe) _PIPE(pipe, _FPA0, _FPB0)
+#define FP1(pipe) _PIPE(pipe, _FPA1, _FPB1)
+#define   FP_N_DIV_MASK		0x003f0000
+#define   FP_N_PINEVIEW_DIV_MASK	0x00ff0000
+#define   FP_N_DIV_SHIFT		16
+#define   FP_M1_DIV_MASK	0x00003f00
+#define   FP_M1_DIV_SHIFT		 8
+#define   FP_M2_DIV_MASK	0x0000003f
+#define   FP_M2_PINEVIEW_DIV_MASK	0x000000ff
+#define   FP_M2_DIV_SHIFT		 0
+#define DPLL_TEST	0x606c
+#define   DPLLB_TEST_SDVO_DIV_1		(0 << 22)
+#define   DPLLB_TEST_SDVO_DIV_2		(1 << 22)
+#define   DPLLB_TEST_SDVO_DIV_4		(2 << 22)
+#define   DPLLB_TEST_SDVO_DIV_MASK	(3 << 22)
+#define   DPLLB_TEST_N_BYPASS		(1 << 19)
+#define   DPLLB_TEST_M_BYPASS		(1 << 18)
+#define   DPLLB_INPUT_BUFFER_ENABLE	(1 << 16)
+#define   DPLLA_TEST_N_BYPASS		(1 << 3)
+#define   DPLLA_TEST_M_BYPASS		(1 << 2)
+#define   DPLLA_INPUT_BUFFER_ENABLE	(1 << 0)
+#define D_STATE		0x6104
+#define  DSTATE_GFX_RESET_I830			(1<<6)
+#define  DSTATE_PLL_D3_OFF			(1<<3)
+#define  DSTATE_GFX_CLOCK_GATING		(1<<1)
+#define  DSTATE_DOT_CLOCK_GATING		(1<<0)
+#define DSPCLK_GATE_D		0x6200
+# define DPUNIT_B_CLOCK_GATE_DISABLE		(1 << 30) /* 965 */
+# define VSUNIT_CLOCK_GATE_DISABLE		(1 << 29) /* 965 */
+# define VRHUNIT_CLOCK_GATE_DISABLE		(1 << 28) /* 965 */
+# define VRDUNIT_CLOCK_GATE_DISABLE		(1 << 27) /* 965 */
+# define AUDUNIT_CLOCK_GATE_DISABLE		(1 << 26) /* 965 */
+# define DPUNIT_A_CLOCK_GATE_DISABLE		(1 << 25) /* 965 */
+# define DPCUNIT_CLOCK_GATE_DISABLE		(1 << 24) /* 965 */
+# define TVRUNIT_CLOCK_GATE_DISABLE		(1 << 23) /* 915-945 */
+# define TVCUNIT_CLOCK_GATE_DISABLE		(1 << 22) /* 915-945 */
+# define TVFUNIT_CLOCK_GATE_DISABLE		(1 << 21) /* 915-945 */
+# define TVEUNIT_CLOCK_GATE_DISABLE		(1 << 20) /* 915-945 */
+# define DVSUNIT_CLOCK_GATE_DISABLE		(1 << 19) /* 915-945 */
+# define DSSUNIT_CLOCK_GATE_DISABLE		(1 << 18) /* 915-945 */
+# define DDBUNIT_CLOCK_GATE_DISABLE		(1 << 17) /* 915-945 */
+# define DPRUNIT_CLOCK_GATE_DISABLE		(1 << 16) /* 915-945 */
+# define DPFUNIT_CLOCK_GATE_DISABLE		(1 << 15) /* 915-945 */
+# define DPBMUNIT_CLOCK_GATE_DISABLE		(1 << 14) /* 915-945 */
+# define DPLSUNIT_CLOCK_GATE_DISABLE		(1 << 13) /* 915-945 */
+# define DPLUNIT_CLOCK_GATE_DISABLE		(1 << 12) /* 915-945 */
+# define DPOUNIT_CLOCK_GATE_DISABLE		(1 << 11)
+# define DPBUNIT_CLOCK_GATE_DISABLE		(1 << 10)
+# define DCUNIT_CLOCK_GATE_DISABLE		(1 << 9)
+# define DPUNIT_CLOCK_GATE_DISABLE		(1 << 8)
+# define VRUNIT_CLOCK_GATE_DISABLE		(1 << 7) /* 915+: reserved */
+# define OVHUNIT_CLOCK_GATE_DISABLE		(1 << 6) /* 830-865 */
+# define DPIOUNIT_CLOCK_GATE_DISABLE		(1 << 6) /* 915-945 */
+# define OVFUNIT_CLOCK_GATE_DISABLE		(1 << 5)
+# define OVBUNIT_CLOCK_GATE_DISABLE		(1 << 4)
+/**
+ * This bit must be set on the 830 to prevent hangs when turning off the
+ * overlay scaler.
+ */
+# define OVRUNIT_CLOCK_GATE_DISABLE		(1 << 3)
+# define OVCUNIT_CLOCK_GATE_DISABLE		(1 << 2)
+# define OVUUNIT_CLOCK_GATE_DISABLE		(1 << 1)
+# define ZVUNIT_CLOCK_GATE_DISABLE		(1 << 0) /* 830 */
+# define OVLUNIT_CLOCK_GATE_DISABLE		(1 << 0) /* 845,865 */
+
+#define RENCLK_GATE_D1		0x6204
+# define BLITTER_CLOCK_GATE_DISABLE		(1 << 13) /* 945GM only */
+# define MPEG_CLOCK_GATE_DISABLE		(1 << 12) /* 945GM only */
+# define PC_FE_CLOCK_GATE_DISABLE		(1 << 11)
+# define PC_BE_CLOCK_GATE_DISABLE		(1 << 10)
+# define WINDOWER_CLOCK_GATE_DISABLE		(1 << 9)
+# define INTERPOLATOR_CLOCK_GATE_DISABLE	(1 << 8)
+# define COLOR_CALCULATOR_CLOCK_GATE_DISABLE	(1 << 7)
+# define MOTION_COMP_CLOCK_GATE_DISABLE		(1 << 6)
+# define MAG_CLOCK_GATE_DISABLE			(1 << 5)
+/** This bit must be unset on 855,865 */
+# define MECI_CLOCK_GATE_DISABLE		(1 << 4)
+# define DCMP_CLOCK_GATE_DISABLE		(1 << 3)
+# define MEC_CLOCK_GATE_DISABLE			(1 << 2)
+# define MECO_CLOCK_GATE_DISABLE		(1 << 1)
+/** This bit must be set on 855,865. */
+# define SV_CLOCK_GATE_DISABLE			(1 << 0)
+# define I915_MPEG_CLOCK_GATE_DISABLE		(1 << 16)
+# define I915_VLD_IP_PR_CLOCK_GATE_DISABLE	(1 << 15)
+# define I915_MOTION_COMP_CLOCK_GATE_DISABLE	(1 << 14)
+# define I915_BD_BF_CLOCK_GATE_DISABLE		(1 << 13)
+# define I915_SF_SE_CLOCK_GATE_DISABLE		(1 << 12)
+# define I915_WM_CLOCK_GATE_DISABLE		(1 << 11)
+# define I915_IZ_CLOCK_GATE_DISABLE		(1 << 10)
+# define I915_PI_CLOCK_GATE_DISABLE		(1 << 9)
+# define I915_DI_CLOCK_GATE_DISABLE		(1 << 8)
+# define I915_SH_SV_CLOCK_GATE_DISABLE		(1 << 7)
+# define I915_PL_DG_QC_FT_CLOCK_GATE_DISABLE	(1 << 6)
+# define I915_SC_CLOCK_GATE_DISABLE		(1 << 5)
+# define I915_FL_CLOCK_GATE_DISABLE		(1 << 4)
+# define I915_DM_CLOCK_GATE_DISABLE		(1 << 3)
+# define I915_PS_CLOCK_GATE_DISABLE		(1 << 2)
+# define I915_CC_CLOCK_GATE_DISABLE		(1 << 1)
+# define I915_BY_CLOCK_GATE_DISABLE		(1 << 0)
+
+# define I965_RCZ_CLOCK_GATE_DISABLE		(1 << 30)
+/** This bit must always be set on 965G/965GM */
+# define I965_RCC_CLOCK_GATE_DISABLE		(1 << 29)
+# define I965_RCPB_CLOCK_GATE_DISABLE		(1 << 28)
+# define I965_DAP_CLOCK_GATE_DISABLE		(1 << 27)
+# define I965_ROC_CLOCK_GATE_DISABLE		(1 << 26)
+# define I965_GW_CLOCK_GATE_DISABLE		(1 << 25)
+# define I965_TD_CLOCK_GATE_DISABLE		(1 << 24)
+/** This bit must always be set on 965G */
+# define I965_ISC_CLOCK_GATE_DISABLE		(1 << 23)
+# define I965_IC_CLOCK_GATE_DISABLE		(1 << 22)
+# define I965_EU_CLOCK_GATE_DISABLE		(1 << 21)
+# define I965_IF_CLOCK_GATE_DISABLE		(1 << 20)
+# define I965_TC_CLOCK_GATE_DISABLE		(1 << 19)
+# define I965_SO_CLOCK_GATE_DISABLE		(1 << 17)
+# define I965_FBC_CLOCK_GATE_DISABLE		(1 << 16)
+# define I965_MARI_CLOCK_GATE_DISABLE		(1 << 15)
+# define I965_MASF_CLOCK_GATE_DISABLE		(1 << 14)
+# define I965_MAWB_CLOCK_GATE_DISABLE		(1 << 13)
+# define I965_EM_CLOCK_GATE_DISABLE		(1 << 12)
+# define I965_UC_CLOCK_GATE_DISABLE		(1 << 11)
+# define I965_SI_CLOCK_GATE_DISABLE		(1 << 6)
+# define I965_MT_CLOCK_GATE_DISABLE		(1 << 5)
+# define I965_PL_CLOCK_GATE_DISABLE		(1 << 4)
+# define I965_DG_CLOCK_GATE_DISABLE		(1 << 3)
+# define I965_QC_CLOCK_GATE_DISABLE		(1 << 2)
+# define I965_FT_CLOCK_GATE_DISABLE		(1 << 1)
+# define I965_DM_CLOCK_GATE_DISABLE		(1 << 0)
+
+#define RENCLK_GATE_D2		0x6208
+#define VF_UNIT_CLOCK_GATE_DISABLE		(1 << 9)
+#define GS_UNIT_CLOCK_GATE_DISABLE		(1 << 7)
+#define CL_UNIT_CLOCK_GATE_DISABLE		(1 << 6)
+#define RAMCLK_GATE_D		0x6210		/* CRL only */
+#define DEUC			0x6214          /* CRL only */
+
+/*
+ * Palette regs
+ */
+
+#define _PALETTE_A		0x0a000
+#define _PALETTE_B		0x0a800
+#define PALETTE(pipe) _PIPE(pipe, _PALETTE_A, _PALETTE_B)
+
+/* MCH MMIO space */
+
+/*
+ * MCHBAR mirror.
+ *
+ * This mirrors the MCHBAR MMIO space whose location is determined by
+ * device 0 function 0's pci config register 0x44 or 0x48 and matches it in
+ * every way.  It is not accessible from the CP register read instructions.
+ *
+ */
+#define MCHBAR_MIRROR_BASE	0x10000
+
+#define MCHBAR_MIRROR_BASE_SNB	0x140000
+
+/** 915-945 and GM965 MCH register controlling DRAM channel access */
+#define DCC			0x10200
+#define DCC_ADDRESSING_MODE_SINGLE_CHANNEL		(0 << 0)
+#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC	(1 << 0)
+#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED	(2 << 0)
+#define DCC_ADDRESSING_MODE_MASK			(3 << 0)
+#define DCC_CHANNEL_XOR_DISABLE				(1 << 10)
+#define DCC_CHANNEL_XOR_BIT_17				(1 << 9)
+
+/** Pineview MCH register contains DDR3 setting */
+#define CSHRDDR3CTL            0x101a8
+#define CSHRDDR3CTL_DDR3       (1 << 2)
+
+/** 965 MCH register controlling DRAM channel configuration */
+#define C0DRB3			0x10206
+#define C1DRB3			0x10606
+
+/** snb MCH registers for reading the DRAM channel configuration */
+#define MAD_DIMM_C0			(MCHBAR_MIRROR_BASE_SNB + 0x5004)
+#define MAD_DIMM_C1			(MCHBAR_MIRROR_BASE_SNB + 0x5008)
+#define MAD_DIMM_C2			(MCHBAR_MIRROR_BASE_SNB + 0x500C)
+#define   MAD_DIMM_ECC_MASK		(0x3 << 24)
+#define   MAD_DIMM_ECC_OFF		(0x0 << 24)
+#define   MAD_DIMM_ECC_IO_ON_LOGIC_OFF	(0x1 << 24)
+#define   MAD_DIMM_ECC_IO_OFF_LOGIC_ON	(0x2 << 24)
+#define   MAD_DIMM_ECC_ON		(0x3 << 24)
+#define   MAD_DIMM_ENH_INTERLEAVE	(0x1 << 22)
+#define   MAD_DIMM_RANK_INTERLEAVE	(0x1 << 21)
+#define   MAD_DIMM_B_WIDTH_X16		(0x1 << 20) /* X8 chips if unset */
+#define   MAD_DIMM_A_WIDTH_X16		(0x1 << 19) /* X8 chips if unset */
+#define   MAD_DIMM_B_DUAL_RANK		(0x1 << 18)
+#define   MAD_DIMM_A_DUAL_RANK		(0x1 << 17)
+#define   MAD_DIMM_A_SELECT		(0x1 << 16)
+/* DIMM sizes are in multiples of 256mb. */
+#define   MAD_DIMM_B_SIZE_SHIFT		8
+#define   MAD_DIMM_B_SIZE_MASK		(0xff << MAD_DIMM_B_SIZE_SHIFT)
+#define   MAD_DIMM_A_SIZE_SHIFT		0
+#define   MAD_DIMM_A_SIZE_MASK		(0xff << MAD_DIMM_A_SIZE_SHIFT)
+
+
+/* Clocking configuration register */
+#define CLKCFG			0x10c00
+#define CLKCFG_FSB_400					(5 << 0)	/* hrawclk 100 */
+#define CLKCFG_FSB_533					(1 << 0)	/* hrawclk 133 */
+#define CLKCFG_FSB_667					(3 << 0)	/* hrawclk 166 */
+#define CLKCFG_FSB_800					(2 << 0)	/* hrawclk 200 */
+#define CLKCFG_FSB_1067					(6 << 0)	/* hrawclk 266 */
+#define CLKCFG_FSB_1333					(7 << 0)	/* hrawclk 333 */
+/* Note, below two are guess */
+#define CLKCFG_FSB_1600					(4 << 0)	/* hrawclk 400 */
+#define CLKCFG_FSB_1600_ALT				(0 << 0)	/* hrawclk 400 */
+#define CLKCFG_FSB_MASK					(7 << 0)
+#define CLKCFG_MEM_533					(1 << 4)
+#define CLKCFG_MEM_667					(2 << 4)
+#define CLKCFG_MEM_800					(3 << 4)
+#define CLKCFG_MEM_MASK					(7 << 4)
+
+#define TSC1			0x11001
+#define   TSE			(1<<0)
+#define TR1			0x11006
+#define TSFS			0x11020
+#define   TSFS_SLOPE_MASK	0x0000ff00
+#define   TSFS_SLOPE_SHIFT	8
+#define   TSFS_INTR_MASK	0x000000ff
+
+#define CRSTANDVID		0x11100
+#define PXVFREQ_BASE		0x11110 /* P[0-15]VIDFREQ (0x1114c) (Ironlake) */
+#define   PXVFREQ_PX_MASK	0x7f000000
+#define   PXVFREQ_PX_SHIFT	24
+#define VIDFREQ_BASE		0x11110
+#define VIDFREQ1		0x11110 /* VIDFREQ1-4 (0x1111c) (Cantiga) */
+#define VIDFREQ2		0x11114
+#define VIDFREQ3		0x11118
+#define VIDFREQ4		0x1111c
+#define   VIDFREQ_P0_MASK	0x1f000000
+#define   VIDFREQ_P0_SHIFT	24
+#define   VIDFREQ_P0_CSCLK_MASK	0x00f00000
+#define   VIDFREQ_P0_CSCLK_SHIFT 20
+#define   VIDFREQ_P0_CRCLK_MASK	0x000f0000
+#define   VIDFREQ_P0_CRCLK_SHIFT 16
+#define   VIDFREQ_P1_MASK	0x00001f00
+#define   VIDFREQ_P1_SHIFT	8
+#define   VIDFREQ_P1_CSCLK_MASK	0x000000f0
+#define   VIDFREQ_P1_CSCLK_SHIFT 4
+#define   VIDFREQ_P1_CRCLK_MASK	0x0000000f
+#define INTTOEXT_BASE_ILK	0x11300
+#define INTTOEXT_BASE		0x11120 /* INTTOEXT1-8 (0x1113c) */
+#define   INTTOEXT_MAP3_SHIFT	24
+#define   INTTOEXT_MAP3_MASK	(0x1f << INTTOEXT_MAP3_SHIFT)
+#define   INTTOEXT_MAP2_SHIFT	16
+#define   INTTOEXT_MAP2_MASK	(0x1f << INTTOEXT_MAP2_SHIFT)
+#define   INTTOEXT_MAP1_SHIFT	8
+#define   INTTOEXT_MAP1_MASK	(0x1f << INTTOEXT_MAP1_SHIFT)
+#define   INTTOEXT_MAP0_SHIFT	0
+#define   INTTOEXT_MAP0_MASK	(0x1f << INTTOEXT_MAP0_SHIFT)
+#define MEMSWCTL		0x11170 /* Ironlake only */
+#define   MEMCTL_CMD_MASK	0xe000
+#define   MEMCTL_CMD_SHIFT	13
+#define   MEMCTL_CMD_RCLK_OFF	0
+#define   MEMCTL_CMD_RCLK_ON	1
+#define   MEMCTL_CMD_CHFREQ	2
+#define   MEMCTL_CMD_CHVID	3
+#define   MEMCTL_CMD_VMMOFF	4
+#define   MEMCTL_CMD_VMMON	5
+#define   MEMCTL_CMD_STS	(1<<12) /* write 1 triggers command, clears
+					   when command complete */
+#define   MEMCTL_FREQ_MASK	0x0f00 /* jitter, from 0-15 */
+#define   MEMCTL_FREQ_SHIFT	8
+#define   MEMCTL_SFCAVM		(1<<7)
+#define   MEMCTL_TGT_VID_MASK	0x007f
+#define MEMIHYST		0x1117c
+#define MEMINTREN		0x11180 /* 16 bits */
+#define   MEMINT_RSEXIT_EN	(1<<8)
+#define   MEMINT_CX_SUPR_EN	(1<<7)
+#define   MEMINT_CONT_BUSY_EN	(1<<6)
+#define   MEMINT_AVG_BUSY_EN	(1<<5)
+#define   MEMINT_EVAL_CHG_EN	(1<<4)
+#define   MEMINT_MON_IDLE_EN	(1<<3)
+#define   MEMINT_UP_EVAL_EN	(1<<2)
+#define   MEMINT_DOWN_EVAL_EN	(1<<1)
+#define   MEMINT_SW_CMD_EN	(1<<0)
+#define MEMINTRSTR		0x11182 /* 16 bits */
+#define   MEM_RSEXIT_MASK	0xc000
+#define   MEM_RSEXIT_SHIFT	14
+#define   MEM_CONT_BUSY_MASK	0x3000
+#define   MEM_CONT_BUSY_SHIFT	12
+#define   MEM_AVG_BUSY_MASK	0x0c00
+#define   MEM_AVG_BUSY_SHIFT	10
+#define   MEM_EVAL_CHG_MASK	0x0300
+#define   MEM_EVAL_BUSY_SHIFT	8
+#define   MEM_MON_IDLE_MASK	0x00c0
+#define   MEM_MON_IDLE_SHIFT	6
+#define   MEM_UP_EVAL_MASK	0x0030
+#define   MEM_UP_EVAL_SHIFT	4
+#define   MEM_DOWN_EVAL_MASK	0x000c
+#define   MEM_DOWN_EVAL_SHIFT	2
+#define   MEM_SW_CMD_MASK	0x0003
+#define   MEM_INT_STEER_GFX	0
+#define   MEM_INT_STEER_CMR	1
+#define   MEM_INT_STEER_SMI	2
+#define   MEM_INT_STEER_SCI	3
+#define MEMINTRSTS		0x11184
+#define   MEMINT_RSEXIT		(1<<7)
+#define   MEMINT_CONT_BUSY	(1<<6)
+#define   MEMINT_AVG_BUSY	(1<<5)
+#define   MEMINT_EVAL_CHG	(1<<4)
+#define   MEMINT_MON_IDLE	(1<<3)
+#define   MEMINT_UP_EVAL	(1<<2)
+#define   MEMINT_DOWN_EVAL	(1<<1)
+#define   MEMINT_SW_CMD		(1<<0)
+#define MEMMODECTL		0x11190
+#define   MEMMODE_BOOST_EN	(1<<31)
+#define   MEMMODE_BOOST_FREQ_MASK 0x0f000000 /* jitter for boost, 0-15 */
+#define   MEMMODE_BOOST_FREQ_SHIFT 24
+#define   MEMMODE_IDLE_MODE_MASK 0x00030000
+#define   MEMMODE_IDLE_MODE_SHIFT 16
+#define   MEMMODE_IDLE_MODE_EVAL 0
+#define   MEMMODE_IDLE_MODE_CONT 1
+#define   MEMMODE_HWIDLE_EN	(1<<15)
+#define   MEMMODE_SWMODE_EN	(1<<14)
+#define   MEMMODE_RCLK_GATE	(1<<13)
+#define   MEMMODE_HW_UPDATE	(1<<12)
+#define   MEMMODE_FSTART_MASK	0x00000f00 /* starting jitter, 0-15 */
+#define   MEMMODE_FSTART_SHIFT	8
+#define   MEMMODE_FMAX_MASK	0x000000f0 /* max jitter, 0-15 */
+#define   MEMMODE_FMAX_SHIFT	4
+#define   MEMMODE_FMIN_MASK	0x0000000f /* min jitter, 0-15 */
+#define RCBMAXAVG		0x1119c
+#define MEMSWCTL2		0x1119e /* Cantiga only */
+#define   SWMEMCMD_RENDER_OFF	(0 << 13)
+#define   SWMEMCMD_RENDER_ON	(1 << 13)
+#define   SWMEMCMD_SWFREQ	(2 << 13)
+#define   SWMEMCMD_TARVID	(3 << 13)
+#define   SWMEMCMD_VRM_OFF	(4 << 13)
+#define   SWMEMCMD_VRM_ON	(5 << 13)
+#define   CMDSTS		(1<<12)
+#define   SFCAVM		(1<<11)
+#define   SWFREQ_MASK		0x0380 /* P0-7 */
+#define   SWFREQ_SHIFT		7
+#define   TARVID_MASK		0x001f
+#define MEMSTAT_CTG		0x111a0
+#define RCBMINAVG		0x111a0
+#define RCUPEI			0x111b0
+#define RCDNEI			0x111b4
+#define RSTDBYCTL		0x111b8
+#define   RS1EN			(1<<31)
+#define   RS2EN			(1<<30)
+#define   RS3EN			(1<<29)
+#define   D3RS3EN		(1<<28) /* Display D3 imlies RS3 */
+#define   SWPROMORSX		(1<<27) /* RSx promotion timers ignored */
+#define   RCWAKERW		(1<<26) /* Resetwarn from PCH causes wakeup */
+#define   DPRSLPVREN		(1<<25) /* Fast voltage ramp enable */
+#define   GFXTGHYST		(1<<24) /* Hysteresis to allow trunk gating */
+#define   RCX_SW_EXIT		(1<<23) /* Leave RSx and prevent re-entry */
+#define   RSX_STATUS_MASK	(7<<20)
+#define   RSX_STATUS_ON		(0<<20)
+#define   RSX_STATUS_RC1	(1<<20)
+#define   RSX_STATUS_RC1E	(2<<20)
+#define   RSX_STATUS_RS1	(3<<20)
+#define   RSX_STATUS_RS2	(4<<20) /* aka rc6 */
+#define   RSX_STATUS_RSVD	(5<<20) /* deep rc6 unsupported on ilk */
+#define   RSX_STATUS_RS3	(6<<20) /* rs3 unsupported on ilk */
+#define   RSX_STATUS_RSVD2	(7<<20)
+#define   UWRCRSXE		(1<<19) /* wake counter limit prevents rsx */
+#define   RSCRP			(1<<18) /* rs requests control on rs1/2 reqs */
+#define   JRSC			(1<<17) /* rsx coupled to cpu c-state */
+#define   RS2INC0		(1<<16) /* allow rs2 in cpu c0 */
+#define   RS1CONTSAV_MASK	(3<<14)
+#define   RS1CONTSAV_NO_RS1	(0<<14) /* rs1 doesn't save/restore context */
+#define   RS1CONTSAV_RSVD	(1<<14)
+#define   RS1CONTSAV_SAVE_RS1	(2<<14) /* rs1 saves context */
+#define   RS1CONTSAV_FULL_RS1	(3<<14) /* rs1 saves and restores context */
+#define   NORMSLEXLAT_MASK	(3<<12)
+#define   SLOW_RS123		(0<<12)
+#define   SLOW_RS23		(1<<12)
+#define   SLOW_RS3		(2<<12)
+#define   NORMAL_RS123		(3<<12)
+#define   RCMODE_TIMEOUT	(1<<11) /* 0 is eval interval method */
+#define   IMPROMOEN		(1<<10) /* promo is immediate or delayed until next idle interval (only for timeout method above) */
+#define   RCENTSYNC		(1<<9) /* rs coupled to cpu c-state (3/6/7) */
+#define   STATELOCK		(1<<7) /* locked to rs_cstate if 0 */
+#define   RS_CSTATE_MASK	(3<<4)
+#define   RS_CSTATE_C367_RS1	(0<<4)
+#define   RS_CSTATE_C36_RS1_C7_RS2 (1<<4)
+#define   RS_CSTATE_RSVD	(2<<4)
+#define   RS_CSTATE_C367_RS2	(3<<4)
+#define   REDSAVES		(1<<3) /* no context save if was idle during rs0 */
+#define   REDRESTORES		(1<<2) /* no restore if was idle during rs0 */
+#define VIDCTL			0x111c0
+#define VIDSTS			0x111c8
+#define VIDSTART		0x111cc /* 8 bits */
+#define MEMSTAT_ILK			0x111f8
+#define   MEMSTAT_VID_MASK	0x7f00
+#define   MEMSTAT_VID_SHIFT	8
+#define   MEMSTAT_PSTATE_MASK	0x00f8
+#define   MEMSTAT_PSTATE_SHIFT  3
+#define   MEMSTAT_MON_ACTV	(1<<2)
+#define   MEMSTAT_SRC_CTL_MASK	0x0003
+#define   MEMSTAT_SRC_CTL_CORE	0
+#define   MEMSTAT_SRC_CTL_TRB	1
+#define   MEMSTAT_SRC_CTL_THM	2
+#define   MEMSTAT_SRC_CTL_STDBY 3
+#define RCPREVBSYTUPAVG		0x113b8
+#define RCPREVBSYTDNAVG		0x113bc
+#define PMMISC			0x11214
+#define   MCPPCE_EN		(1<<0) /* enable PM_MSG from PCH->MPC */
+#define SDEW			0x1124c
+#define CSIEW0			0x11250
+#define CSIEW1			0x11254
+#define CSIEW2			0x11258
+#define PEW			0x1125c
+#define DEW			0x11270
+#define MCHAFE			0x112c0
+#define CSIEC			0x112e0
+#define DMIEC			0x112e4
+#define DDREC			0x112e8
+#define PEG0EC			0x112ec
+#define PEG1EC			0x112f0
+#define GFXEC			0x112f4
+#define RPPREVBSYTUPAVG		0x113b8
+#define RPPREVBSYTDNAVG		0x113bc
+#define ECR			0x11600
+#define   ECR_GPFE		(1<<31)
+#define   ECR_IMONE		(1<<30)
+#define   ECR_CAP_MASK		0x0000001f /* Event range, 0-31 */
+#define OGW0			0x11608
+#define OGW1			0x1160c
+#define EG0			0x11610
+#define EG1			0x11614
+#define EG2			0x11618
+#define EG3			0x1161c
+#define EG4			0x11620
+#define EG5			0x11624
+#define EG6			0x11628
+#define EG7			0x1162c
+#define PXW			0x11664
+#define PXWL			0x11680
+#define LCFUSE02		0x116c0
+#define   LCFUSE_HIV_MASK	0x000000ff
+#define CSIPLL0			0x12c10
+#define DDRMPLL1		0X12c20
+#define PEG_BAND_GAP_DATA	0x14d68
+
+#define GEN6_GT_PERF_STATUS	0x145948
+#define GEN6_RP_STATE_LIMITS	0x145994
+#define GEN6_RP_STATE_CAP	0x145998
+
+/*
+ * Logical Context regs
+ */
+#define CCID			0x2180
+#define   CCID_EN		(1<<0)
+/*
+ * Overlay regs
+ */
+
+#define OVADD			0x30000
+#define DOVSTA			0x30008
+#define OC_BUF			(0x3<<20)
+#define OGAMC5			0x30010
+#define OGAMC4			0x30014
+#define OGAMC3			0x30018
+#define OGAMC2			0x3001c
+#define OGAMC1			0x30020
+#define OGAMC0			0x30024
+
+/*
+ * Display engine regs
+ */
+
+/* Pipe A timing regs */
+#define _HTOTAL_A	0x60000
+#define _HBLANK_A	0x60004
+#define _HSYNC_A		0x60008
+#define _VTOTAL_A	0x6000c
+#define _VBLANK_A	0x60010
+#define _VSYNC_A		0x60014
+#define _PIPEASRC	0x6001c
+#define _BCLRPAT_A	0x60020
+#define _VSYNCSHIFT_A	0x60028
+
+/* Pipe B timing regs */
+#define _HTOTAL_B	0x61000
+#define _HBLANK_B	0x61004
+#define _HSYNC_B		0x61008
+#define _VTOTAL_B	0x6100c
+#define _VBLANK_B	0x61010
+#define _VSYNC_B		0x61014
+#define _PIPEBSRC	0x6101c
+#define _BCLRPAT_B	0x61020
+#define _VSYNCSHIFT_B	0x61028
+
+
+#define HTOTAL(pipe) _PIPE(pipe, _HTOTAL_A, _HTOTAL_B)
+#define HBLANK(pipe) _PIPE(pipe, _HBLANK_A, _HBLANK_B)
+#define HSYNC(pipe) _PIPE(pipe, _HSYNC_A, _HSYNC_B)
+#define VTOTAL(pipe) _PIPE(pipe, _VTOTAL_A, _VTOTAL_B)
+#define VBLANK(pipe) _PIPE(pipe, _VBLANK_A, _VBLANK_B)
+#define VSYNC(pipe) _PIPE(pipe, _VSYNC_A, _VSYNC_B)
+#define BCLRPAT(pipe) _PIPE(pipe, _BCLRPAT_A, _BCLRPAT_B)
+#define VSYNCSHIFT(pipe) _PIPE(pipe, _VSYNCSHIFT_A, _VSYNCSHIFT_B)
+
+/* VGA port control */
+#define ADPA			0x61100
+#define   ADPA_DAC_ENABLE	(1<<31)
+#define   ADPA_DAC_DISABLE	0
+#define   ADPA_PIPE_SELECT_MASK	(1<<30)
+#define   ADPA_PIPE_A_SELECT	0
+#define   ADPA_PIPE_B_SELECT	(1<<30)
+#define   ADPA_PIPE_SELECT(pipe) ((pipe) << 30)
+#define   ADPA_USE_VGA_HVPOLARITY (1<<15)
+#define   ADPA_SETS_HVPOLARITY	0
+#define   ADPA_VSYNC_CNTL_DISABLE (1<<11)
+#define   ADPA_VSYNC_CNTL_ENABLE 0
+#define   ADPA_HSYNC_CNTL_DISABLE (1<<10)
+#define   ADPA_HSYNC_CNTL_ENABLE 0
+#define   ADPA_VSYNC_ACTIVE_HIGH (1<<4)
+#define   ADPA_VSYNC_ACTIVE_LOW	0
+#define   ADPA_HSYNC_ACTIVE_HIGH (1<<3)
+#define   ADPA_HSYNC_ACTIVE_LOW	0
+#define   ADPA_DPMS_MASK	(~(3<<10))
+#define   ADPA_DPMS_ON		(0<<10)
+#define   ADPA_DPMS_SUSPEND	(1<<10)
+#define   ADPA_DPMS_STANDBY	(2<<10)
+#define   ADPA_DPMS_OFF		(3<<10)
+
+
+/* Hotplug control (945+ only) */
+#define PORT_HOTPLUG_EN		0x61110
+#define   HDMIB_HOTPLUG_INT_EN			(1 << 29)
+#define   DPB_HOTPLUG_INT_EN			(1 << 29)
+#define   HDMIC_HOTPLUG_INT_EN			(1 << 28)
+#define   DPC_HOTPLUG_INT_EN			(1 << 28)
+#define   HDMID_HOTPLUG_INT_EN			(1 << 27)
+#define   DPD_HOTPLUG_INT_EN			(1 << 27)
+#define   SDVOB_HOTPLUG_INT_EN			(1 << 26)
+#define   SDVOC_HOTPLUG_INT_EN			(1 << 25)
+#define   TV_HOTPLUG_INT_EN			(1 << 18)
+#define   CRT_HOTPLUG_INT_EN			(1 << 9)
+#define   CRT_HOTPLUG_FORCE_DETECT		(1 << 3)
+#define CRT_HOTPLUG_ACTIVATION_PERIOD_32	(0 << 8)
+/* must use period 64 on GM45 according to docs */
+#define CRT_HOTPLUG_ACTIVATION_PERIOD_64	(1 << 8)
+#define CRT_HOTPLUG_DAC_ON_TIME_2M		(0 << 7)
+#define CRT_HOTPLUG_DAC_ON_TIME_4M		(1 << 7)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_40		(0 << 5)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_50		(1 << 5)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_60		(2 << 5)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_70		(3 << 5)
+#define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK	(3 << 5)
+#define CRT_HOTPLUG_DETECT_DELAY_1G		(0 << 4)
+#define CRT_HOTPLUG_DETECT_DELAY_2G		(1 << 4)
+#define CRT_HOTPLUG_DETECT_VOLTAGE_325MV	(0 << 2)
+#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV	(1 << 2)
+
+#define PORT_HOTPLUG_STAT	0x61114
+#define   HDMIB_HOTPLUG_INT_STATUS		(1 << 29)
+#define   DPB_HOTPLUG_INT_STATUS		(1 << 29)
+#define   HDMIC_HOTPLUG_INT_STATUS		(1 << 28)
+#define   DPC_HOTPLUG_INT_STATUS		(1 << 28)
+#define   HDMID_HOTPLUG_INT_STATUS		(1 << 27)
+#define   DPD_HOTPLUG_INT_STATUS		(1 << 27)
+#define   CRT_HOTPLUG_INT_STATUS		(1 << 11)
+#define   TV_HOTPLUG_INT_STATUS			(1 << 10)
+#define   CRT_HOTPLUG_MONITOR_MASK		(3 << 8)
+#define   CRT_HOTPLUG_MONITOR_COLOR		(3 << 8)
+#define   CRT_HOTPLUG_MONITOR_MONO		(2 << 8)
+#define   CRT_HOTPLUG_MONITOR_NONE		(0 << 8)
+#define   SDVOC_HOTPLUG_INT_STATUS		(1 << 7)
+#define   SDVOB_HOTPLUG_INT_STATUS		(1 << 6)
+
+/* SDVO port control */
+#define SDVOB			0x61140
+#define SDVOC			0x61160
+#define   SDVO_ENABLE		(1 << 31)
+#define   SDVO_PIPE_B_SELECT	(1 << 30)
+#define   SDVO_STALL_SELECT	(1 << 29)
+#define   SDVO_INTERRUPT_ENABLE	(1 << 26)
+/**
+ * 915G/GM SDVO pixel multiplier.
+ *
+ * Programmed value is multiplier - 1, up to 5x.
+ *
+ * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+#define   SDVO_PORT_MULTIPLY_MASK	(7 << 23)
+#define   SDVO_PORT_MULTIPLY_SHIFT		23
+#define   SDVO_PHASE_SELECT_MASK	(15 << 19)
+#define   SDVO_PHASE_SELECT_DEFAULT	(6 << 19)
+#define   SDVO_CLOCK_OUTPUT_INVERT	(1 << 18)
+#define   SDVOC_GANG_MODE		(1 << 16)
+#define   SDVO_ENCODING_SDVO		(0x0 << 10)
+#define   SDVO_ENCODING_HDMI		(0x2 << 10)
+/** Requird for HDMI operation */
+#define   SDVO_NULL_PACKETS_DURING_VSYNC (1 << 9)
+#define   SDVO_COLOR_RANGE_16_235	(1 << 8)
+#define   SDVO_BORDER_ENABLE		(1 << 7)
+#define   SDVO_AUDIO_ENABLE		(1 << 6)
+/** New with 965, default is to be set */
+#define   SDVO_VSYNC_ACTIVE_HIGH	(1 << 4)
+/** New with 965, default is to be set */
+#define   SDVO_HSYNC_ACTIVE_HIGH	(1 << 3)
+#define   SDVOB_PCIE_CONCURRENCY	(1 << 3)
+#define   SDVO_DETECTED			(1 << 2)
+/* Bits to be preserved when writing */
+#define   SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14) | (1 << 26))
+#define   SDVOC_PRESERVE_MASK ((1 << 17) | (1 << 26))
+
+/* DVO port control */
+#define DVOA			0x61120
+#define DVOB			0x61140
+#define DVOC			0x61160
+#define   DVO_ENABLE			(1 << 31)
+#define   DVO_PIPE_B_SELECT		(1 << 30)
+#define   DVO_PIPE_STALL_UNUSED		(0 << 28)
+#define   DVO_PIPE_STALL		(1 << 28)
+#define   DVO_PIPE_STALL_TV		(2 << 28)
+#define   DVO_PIPE_STALL_MASK		(3 << 28)
+#define   DVO_USE_VGA_SYNC		(1 << 15)
+#define   DVO_DATA_ORDER_I740		(0 << 14)
+#define   DVO_DATA_ORDER_FP		(1 << 14)
+#define   DVO_VSYNC_DISABLE		(1 << 11)
+#define   DVO_HSYNC_DISABLE		(1 << 10)
+#define   DVO_VSYNC_TRISTATE		(1 << 9)
+#define   DVO_HSYNC_TRISTATE		(1 << 8)
+#define   DVO_BORDER_ENABLE		(1 << 7)
+#define   DVO_DATA_ORDER_GBRG		(1 << 6)
+#define   DVO_DATA_ORDER_RGGB		(0 << 6)
+#define   DVO_DATA_ORDER_GBRG_ERRATA	(0 << 6)
+#define   DVO_DATA_ORDER_RGGB_ERRATA	(1 << 6)
+#define   DVO_VSYNC_ACTIVE_HIGH		(1 << 4)
+#define   DVO_HSYNC_ACTIVE_HIGH		(1 << 3)
+#define   DVO_BLANK_ACTIVE_HIGH		(1 << 2)
+#define   DVO_OUTPUT_CSTATE_PIXELS	(1 << 1)	/* SDG only */
+#define   DVO_OUTPUT_SOURCE_SIZE_PIXELS	(1 << 0)	/* SDG only */
+#define   DVO_PRESERVE_MASK		(0x7<<24)
+#define DVOA_SRCDIM		0x61124
+#define DVOB_SRCDIM		0x61144
+#define DVOC_SRCDIM		0x61164
+#define   DVO_SRCDIM_HORIZONTAL_SHIFT	12
+#define   DVO_SRCDIM_VERTICAL_SHIFT	0
+
+/* LVDS port control */
+#define LVDS			0x61180
+/*
+ * Enables the LVDS port.  This bit must be set before DPLLs are enabled, as
+ * the DPLL semantics change when the LVDS is assigned to that pipe.
+ */
+#define   LVDS_PORT_EN			(1 << 31)
+/* Selects pipe B for LVDS data.  Must be set on pre-965. */
+#define   LVDS_PIPEB_SELECT		(1 << 30)
+#define   LVDS_PIPE_MASK		(1 << 30)
+#define   LVDS_PIPE(pipe)		((pipe) << 30)
+/* LVDS dithering flag on 965/g4x platform */
+#define   LVDS_ENABLE_DITHER		(1 << 25)
+/* LVDS sync polarity flags. Set to invert (i.e. negative) */
+#define   LVDS_VSYNC_POLARITY		(1 << 21)
+#define   LVDS_HSYNC_POLARITY		(1 << 20)
+
+/* Enable border for unscaled (or aspect-scaled) display */
+#define   LVDS_BORDER_ENABLE		(1 << 15)
+/*
+ * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
+ * pixel.
+ */
+#define   LVDS_A0A2_CLKA_POWER_MASK	(3 << 8)
+#define   LVDS_A0A2_CLKA_POWER_DOWN	(0 << 8)
+#define   LVDS_A0A2_CLKA_POWER_UP	(3 << 8)
+/*
+ * Controls the A3 data pair, which contains the additional LSBs for 24 bit
+ * mode.  Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
+ * on.
+ */
+#define   LVDS_A3_POWER_MASK		(3 << 6)
+#define   LVDS_A3_POWER_DOWN		(0 << 6)
+#define   LVDS_A3_POWER_UP		(3 << 6)
+/*
+ * Controls the CLKB pair.  This should only be set when LVDS_B0B3_POWER_UP
+ * is set.
+ */
+#define   LVDS_CLKB_POWER_MASK		(3 << 4)
+#define   LVDS_CLKB_POWER_DOWN		(0 << 4)
+#define   LVDS_CLKB_POWER_UP		(3 << 4)
+/*
+ * Controls the B0-B3 data pairs.  This must be set to match the DPLL p2
+ * setting for whether we are in dual-channel mode.  The B3 pair will
+ * additionally only be powered up when LVDS_A3_POWER_UP is set.
+ */
+#define   LVDS_B0B3_POWER_MASK		(3 << 2)
+#define   LVDS_B0B3_POWER_DOWN		(0 << 2)
+#define   LVDS_B0B3_POWER_UP		(3 << 2)
+
+/* Video Data Island Packet control */
+#define VIDEO_DIP_DATA		0x61178
+#define VIDEO_DIP_CTL		0x61170
+#define   VIDEO_DIP_ENABLE		(1 << 31)
+#define   VIDEO_DIP_PORT_B		(1 << 29)
+#define   VIDEO_DIP_PORT_C		(2 << 29)
+#define   VIDEO_DIP_ENABLE_AVI		(1 << 21)
+#define   VIDEO_DIP_ENABLE_VENDOR	(2 << 21)
+#define   VIDEO_DIP_ENABLE_SPD		(8 << 21)
+#define   VIDEO_DIP_SELECT_AVI		(0 << 19)
+#define   VIDEO_DIP_SELECT_VENDOR	(1 << 19)
+#define   VIDEO_DIP_SELECT_SPD		(3 << 19)
+#define   VIDEO_DIP_SELECT_MASK		(3 << 19)
+#define   VIDEO_DIP_FREQ_ONCE		(0 << 16)
+#define   VIDEO_DIP_FREQ_VSYNC		(1 << 16)
+#define   VIDEO_DIP_FREQ_2VSYNC		(2 << 16)
+
+/* Panel power sequencing */
+#define PP_STATUS	0x61200
+#define   PP_ON		(1 << 31)
+/*
+ * Indicates that all dependencies of the panel are on:
+ *
+ * - PLL enabled
+ * - pipe enabled
+ * - LVDS/DVOB/DVOC on
+ */
+#define   PP_READY		(1 << 30)
+#define   PP_SEQUENCE_NONE	(0 << 28)
+#define   PP_SEQUENCE_POWER_UP	(1 << 28)
+#define   PP_SEQUENCE_POWER_DOWN (2 << 28)
+#define   PP_SEQUENCE_MASK	(3 << 28)
+#define   PP_SEQUENCE_SHIFT	28
+#define   PP_CYCLE_DELAY_ACTIVE	(1 << 27)
+#define   PP_SEQUENCE_STATE_MASK 0x0000000f
+#define   PP_SEQUENCE_STATE_OFF_IDLE	(0x0 << 0)
+#define   PP_SEQUENCE_STATE_OFF_S0_1	(0x1 << 0)
+#define   PP_SEQUENCE_STATE_OFF_S0_2	(0x2 << 0)
+#define   PP_SEQUENCE_STATE_OFF_S0_3	(0x3 << 0)
+#define   PP_SEQUENCE_STATE_ON_IDLE	(0x8 << 0)
+#define   PP_SEQUENCE_STATE_ON_S1_0	(0x9 << 0)
+#define   PP_SEQUENCE_STATE_ON_S1_2	(0xa << 0)
+#define   PP_SEQUENCE_STATE_ON_S1_3	(0xb << 0)
+#define   PP_SEQUENCE_STATE_RESET	(0xf << 0)
+#define PP_CONTROL	0x61204
+#define   POWER_TARGET_ON	(1 << 0)
+#define PP_ON_DELAYS	0x61208
+#define PP_OFF_DELAYS	0x6120c
+#define PP_DIVISOR	0x61210
+
+/* Panel fitting */
+#define PFIT_CONTROL	0x61230
+#define   PFIT_ENABLE		(1 << 31)
+#define   PFIT_PIPE_MASK	(3 << 29)
+#define   PFIT_PIPE_SHIFT	29
+#define   VERT_INTERP_DISABLE	(0 << 10)
+#define   VERT_INTERP_BILINEAR	(1 << 10)
+#define   VERT_INTERP_MASK	(3 << 10)
+#define   VERT_AUTO_SCALE	(1 << 9)
+#define   HORIZ_INTERP_DISABLE	(0 << 6)
+#define   HORIZ_INTERP_BILINEAR	(1 << 6)
+#define   HORIZ_INTERP_MASK	(3 << 6)
+#define   HORIZ_AUTO_SCALE	(1 << 5)
+#define   PANEL_8TO6_DITHER_ENABLE (1 << 3)
+#define   PFIT_FILTER_FUZZY	(0 << 24)
+#define   PFIT_SCALING_AUTO	(0 << 26)
+#define   PFIT_SCALING_PROGRAMMED (1 << 26)
+#define   PFIT_SCALING_PILLAR	(2 << 26)
+#define   PFIT_SCALING_LETTER	(3 << 26)
+#define PFIT_PGM_RATIOS	0x61234
+#define   PFIT_VERT_SCALE_MASK			0xfff00000
+#define   PFIT_HORIZ_SCALE_MASK			0x0000fff0
+/* Pre-965 */
+#define		PFIT_VERT_SCALE_SHIFT		20
+#define		PFIT_VERT_SCALE_MASK		0xfff00000
+#define		PFIT_HORIZ_SCALE_SHIFT		4
+#define		PFIT_HORIZ_SCALE_MASK		0x0000fff0
+/* 965+ */
+#define		PFIT_VERT_SCALE_SHIFT_965	16
+#define		PFIT_VERT_SCALE_MASK_965	0x1fff0000
+#define		PFIT_HORIZ_SCALE_SHIFT_965	0
+#define		PFIT_HORIZ_SCALE_MASK_965	0x00001fff
+
+#define PFIT_AUTO_RATIOS 0x61238
+
+/* Backlight control */
+#define BLC_PWM_CTL		0x61254
+#define   BACKLIGHT_MODULATION_FREQ_SHIFT		(17)
+#define BLC_PWM_CTL2		0x61250 /* 965+ only */
+#define   BLM_COMBINATION_MODE (1 << 30)
+/*
+ * This is the most significant 15 bits of the number of backlight cycles in a
+ * complete cycle of the modulated backlight control.
+ *
+ * The actual value is this field multiplied by two.
+ */
+#define   BACKLIGHT_MODULATION_FREQ_MASK		(0x7fff << 17)
+#define   BLM_LEGACY_MODE				(1 << 16)
+/*
+ * This is the number of cycles out of the backlight modulation cycle for which
+ * the backlight is on.
+ *
+ * This field must be no greater than the number of cycles in the complete
+ * backlight modulation cycle.
+ */
+#define   BACKLIGHT_DUTY_CYCLE_SHIFT		(0)
+#define   BACKLIGHT_DUTY_CYCLE_MASK		(0xffff)
+
+#define BLC_HIST_CTL		0x61260
+
+/* TV port control */
+#define TV_CTL			0x68000
+/** Enables the TV encoder */
+# define TV_ENC_ENABLE			(1 << 31)
+/** Sources the TV encoder input from pipe B instead of A. */
+# define TV_ENC_PIPEB_SELECT		(1 << 30)
+/** Outputs composite video (DAC A only) */
+# define TV_ENC_OUTPUT_COMPOSITE	(0 << 28)
+/** Outputs SVideo video (DAC B/C) */
+# define TV_ENC_OUTPUT_SVIDEO		(1 << 28)
+/** Outputs Component video (DAC A/B/C) */
+# define TV_ENC_OUTPUT_COMPONENT	(2 << 28)
+/** Outputs Composite and SVideo (DAC A/B/C) */
+# define TV_ENC_OUTPUT_SVIDEO_COMPOSITE	(3 << 28)
+# define TV_TRILEVEL_SYNC		(1 << 21)
+/** Enables slow sync generation (945GM only) */
+# define TV_SLOW_SYNC			(1 << 20)
+/** Selects 4x oversampling for 480i and 576p */
+# define TV_OVERSAMPLE_4X		(0 << 18)
+/** Selects 2x oversampling for 720p and 1080i */
+# define TV_OVERSAMPLE_2X		(1 << 18)
+/** Selects no oversampling for 1080p */
+# define TV_OVERSAMPLE_NONE		(2 << 18)
+/** Selects 8x oversampling */
+# define TV_OVERSAMPLE_8X		(3 << 18)
+/** Selects progressive mode rather than interlaced */
+# define TV_PROGRESSIVE			(1 << 17)
+/** Sets the colorburst to PAL mode.  Required for non-M PAL modes. */
+# define TV_PAL_BURST			(1 << 16)
+/** Field for setting delay of Y compared to C */
+# define TV_YC_SKEW_MASK		(7 << 12)
+/** Enables a fix for 480p/576p standard definition modes on the 915GM only */
+# define TV_ENC_SDP_FIX			(1 << 11)
+/**
+ * Enables a fix for the 915GM only.
+ *
+ * Not sure what it does.
+ */
+# define TV_ENC_C0_FIX			(1 << 10)
+/** Bits that must be preserved by software */
+# define TV_CTL_SAVE			((1 << 11) | (3 << 9) | (7 << 6) | 0xf)
+# define TV_FUSE_STATE_MASK		(3 << 4)
+/** Read-only state that reports all features enabled */
+# define TV_FUSE_STATE_ENABLED		(0 << 4)
+/** Read-only state that reports that Macrovision is disabled in hardware*/
+# define TV_FUSE_STATE_NO_MACROVISION	(1 << 4)
+/** Read-only state that reports that TV-out is disabled in hardware. */
+# define TV_FUSE_STATE_DISABLED		(2 << 4)
+/** Normal operation */
+# define TV_TEST_MODE_NORMAL		(0 << 0)
+/** Encoder test pattern 1 - combo pattern */
+# define TV_TEST_MODE_PATTERN_1		(1 << 0)
+/** Encoder test pattern 2 - full screen vertical 75% color bars */
+# define TV_TEST_MODE_PATTERN_2		(2 << 0)
+/** Encoder test pattern 3 - full screen horizontal 75% color bars */
+# define TV_TEST_MODE_PATTERN_3		(3 << 0)
+/** Encoder test pattern 4 - random noise */
+# define TV_TEST_MODE_PATTERN_4		(4 << 0)
+/** Encoder test pattern 5 - linear color ramps */
+# define TV_TEST_MODE_PATTERN_5		(5 << 0)
+/**
+ * This test mode forces the DACs to 50% of full output.
+ *
+ * This is used for load detection in combination with TVDAC_SENSE_MASK
+ */
+# define TV_TEST_MODE_MONITOR_DETECT	(7 << 0)
+# define TV_TEST_MODE_MASK		(7 << 0)
+
+#define TV_DAC			0x68004
+# define TV_DAC_SAVE		0x00ffff00
+/**
+ * Reports that DAC state change logic has reported change (RO).
+ *
+ * This gets cleared when TV_DAC_STATE_EN is cleared
+*/
+# define TVDAC_STATE_CHG		(1 << 31)
+# define TVDAC_SENSE_MASK		(7 << 28)
+/** Reports that DAC A voltage is above the detect threshold */
+# define TVDAC_A_SENSE			(1 << 30)
+/** Reports that DAC B voltage is above the detect threshold */
+# define TVDAC_B_SENSE			(1 << 29)
+/** Reports that DAC C voltage is above the detect threshold */
+# define TVDAC_C_SENSE			(1 << 28)
+/**
+ * Enables DAC state detection logic, for load-based TV detection.
+ *
+ * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set
+ * to off, for load detection to work.
+ */
+# define TVDAC_STATE_CHG_EN		(1 << 27)
+/** Sets the DAC A sense value to high */
+# define TVDAC_A_SENSE_CTL		(1 << 26)
+/** Sets the DAC B sense value to high */
+# define TVDAC_B_SENSE_CTL		(1 << 25)
+/** Sets the DAC C sense value to high */
+# define TVDAC_C_SENSE_CTL		(1 << 24)
+/** Overrides the ENC_ENABLE and DAC voltage levels */
+# define DAC_CTL_OVERRIDE		(1 << 7)
+/** Sets the slew rate.  Must be preserved in software */
+# define ENC_TVDAC_SLEW_FAST		(1 << 6)
+# define DAC_A_1_3_V			(0 << 4)
+# define DAC_A_1_1_V			(1 << 4)
+# define DAC_A_0_7_V			(2 << 4)
+# define DAC_A_MASK			(3 << 4)
+# define DAC_B_1_3_V			(0 << 2)
+# define DAC_B_1_1_V			(1 << 2)
+# define DAC_B_0_7_V			(2 << 2)
+# define DAC_B_MASK			(3 << 2)
+# define DAC_C_1_3_V			(0 << 0)
+# define DAC_C_1_1_V			(1 << 0)
+# define DAC_C_0_7_V			(2 << 0)
+# define DAC_C_MASK			(3 << 0)
+
+/**
+ * CSC coefficients are stored in a floating point format with 9 bits of
+ * mantissa and 2 or 3 bits of exponent.  The exponent is represented as 2**-n,
+ * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with
+ * -1 (0x3) being the only legal negative value.
+ */
+#define TV_CSC_Y		0x68010
+# define TV_RY_MASK			0x07ff0000
+# define TV_RY_SHIFT			16
+# define TV_GY_MASK			0x00000fff
+# define TV_GY_SHIFT			0
+
+#define TV_CSC_Y2		0x68014
+# define TV_BY_MASK			0x07ff0000
+# define TV_BY_SHIFT			16
+/**
+ * Y attenuation for component video.
+ *
+ * Stored in 1.9 fixed point.
+ */
+# define TV_AY_MASK			0x000003ff
+# define TV_AY_SHIFT			0
+
+#define TV_CSC_U		0x68018
+# define TV_RU_MASK			0x07ff0000
+# define TV_RU_SHIFT			16
+# define TV_GU_MASK			0x000007ff
+# define TV_GU_SHIFT			0
+
+#define TV_CSC_U2		0x6801c
+# define TV_BU_MASK			0x07ff0000
+# define TV_BU_SHIFT			16
+/**
+ * U attenuation for component video.
+ *
+ * Stored in 1.9 fixed point.
+ */
+# define TV_AU_MASK			0x000003ff
+# define TV_AU_SHIFT			0
+
+#define TV_CSC_V		0x68020
+# define TV_RV_MASK			0x0fff0000
+# define TV_RV_SHIFT			16
+# define TV_GV_MASK			0x000007ff
+# define TV_GV_SHIFT			0
+
+#define TV_CSC_V2		0x68024
+# define TV_BV_MASK			0x07ff0000
+# define TV_BV_SHIFT			16
+/**
+ * V attenuation for component video.
+ *
+ * Stored in 1.9 fixed point.
+ */
+# define TV_AV_MASK			0x000007ff
+# define TV_AV_SHIFT			0
+
+#define TV_CLR_KNOBS		0x68028
+/** 2s-complement brightness adjustment */
+# define TV_BRIGHTNESS_MASK		0xff000000
+# define TV_BRIGHTNESS_SHIFT		24
+/** Contrast adjustment, as a 2.6 unsigned floating point number */
+# define TV_CONTRAST_MASK		0x00ff0000
+# define TV_CONTRAST_SHIFT		16
+/** Saturation adjustment, as a 2.6 unsigned floating point number */
+# define TV_SATURATION_MASK		0x0000ff00
+# define TV_SATURATION_SHIFT		8
+/** Hue adjustment, as an integer phase angle in degrees */
+# define TV_HUE_MASK			0x000000ff
+# define TV_HUE_SHIFT			0
+
+#define TV_CLR_LEVEL		0x6802c
+/** Controls the DAC level for black */
+# define TV_BLACK_LEVEL_MASK		0x01ff0000
+# define TV_BLACK_LEVEL_SHIFT		16
+/** Controls the DAC level for blanking */
+# define TV_BLANK_LEVEL_MASK		0x000001ff
+# define TV_BLANK_LEVEL_SHIFT		0
+
+#define TV_H_CTL_1		0x68030
+/** Number of pixels in the hsync. */
+# define TV_HSYNC_END_MASK		0x1fff0000
+# define TV_HSYNC_END_SHIFT		16
+/** Total number of pixels minus one in the line (display and blanking). */
+# define TV_HTOTAL_MASK			0x00001fff
+# define TV_HTOTAL_SHIFT		0
+
+#define TV_H_CTL_2		0x68034
+/** Enables the colorburst (needed for non-component color) */
+# define TV_BURST_ENA			(1 << 31)
+/** Offset of the colorburst from the start of hsync, in pixels minus one. */
+# define TV_HBURST_START_SHIFT		16
+# define TV_HBURST_START_MASK		0x1fff0000
+/** Length of the colorburst */
+# define TV_HBURST_LEN_SHIFT		0
+# define TV_HBURST_LEN_MASK		0x0001fff
+
+#define TV_H_CTL_3		0x68038
+/** End of hblank, measured in pixels minus one from start of hsync */
+# define TV_HBLANK_END_SHIFT		16
+# define TV_HBLANK_END_MASK		0x1fff0000
+/** Start of hblank, measured in pixels minus one from start of hsync */
+# define TV_HBLANK_START_SHIFT		0
+# define TV_HBLANK_START_MASK		0x0001fff
+
+#define TV_V_CTL_1		0x6803c
+/** XXX */
+# define TV_NBR_END_SHIFT		16
+# define TV_NBR_END_MASK		0x07ff0000
+/** XXX */
+# define TV_VI_END_F1_SHIFT		8
+# define TV_VI_END_F1_MASK		0x00003f00
+/** XXX */
+# define TV_VI_END_F2_SHIFT		0
+# define TV_VI_END_F2_MASK		0x0000003f
+
+#define TV_V_CTL_2		0x68040
+/** Length of vsync, in half lines */
+# define TV_VSYNC_LEN_MASK		0x07ff0000
+# define TV_VSYNC_LEN_SHIFT		16
+/** Offset of the start of vsync in field 1, measured in one less than the
+ * number of half lines.
+ */
+# define TV_VSYNC_START_F1_MASK		0x00007f00
+# define TV_VSYNC_START_F1_SHIFT	8
+/**
+ * Offset of the start of vsync in field 2, measured in one less than the
+ * number of half lines.
+ */
+# define TV_VSYNC_START_F2_MASK		0x0000007f
+# define TV_VSYNC_START_F2_SHIFT	0
+
+#define TV_V_CTL_3		0x68044
+/** Enables generation of the equalization signal */
+# define TV_EQUAL_ENA			(1 << 31)
+/** Length of vsync, in half lines */
+# define TV_VEQ_LEN_MASK		0x007f0000
+# define TV_VEQ_LEN_SHIFT		16
+/** Offset of the start of equalization in field 1, measured in one less than
+ * the number of half lines.
+ */
+# define TV_VEQ_START_F1_MASK		0x0007f00
+# define TV_VEQ_START_F1_SHIFT		8
+/**
+ * Offset of the start of equalization in field 2, measured in one less than
+ * the number of half lines.
+ */
+# define TV_VEQ_START_F2_MASK		0x000007f
+# define TV_VEQ_START_F2_SHIFT		0
+
+#define TV_V_CTL_4		0x68048
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F1_MASK	0x003f0000
+# define TV_VBURST_START_F1_SHIFT	16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F1_MASK		0x000000ff
+# define TV_VBURST_END_F1_SHIFT		0
+
+#define TV_V_CTL_5		0x6804c
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F2_MASK	0x003f0000
+# define TV_VBURST_START_F2_SHIFT	16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F2_MASK		0x000000ff
+# define TV_VBURST_END_F2_SHIFT		0
+
+#define TV_V_CTL_6		0x68050
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F3_MASK	0x003f0000
+# define TV_VBURST_START_F3_SHIFT	16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F3_MASK		0x000000ff
+# define TV_VBURST_END_F3_SHIFT		0
+
+#define TV_V_CTL_7		0x68054
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F4_MASK	0x003f0000
+# define TV_VBURST_START_F4_SHIFT	16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F4_MASK		0x000000ff
+# define TV_VBURST_END_F4_SHIFT		0
+
+#define TV_SC_CTL_1		0x68060
+/** Turns on the first subcarrier phase generation DDA */
+# define TV_SC_DDA1_EN			(1 << 31)
+/** Turns on the first subcarrier phase generation DDA */
+# define TV_SC_DDA2_EN			(1 << 30)
+/** Turns on the first subcarrier phase generation DDA */
+# define TV_SC_DDA3_EN			(1 << 29)
+/** Sets the subcarrier DDA to reset frequency every other field */
+# define TV_SC_RESET_EVERY_2		(0 << 24)
+/** Sets the subcarrier DDA to reset frequency every fourth field */
+# define TV_SC_RESET_EVERY_4		(1 << 24)
+/** Sets the subcarrier DDA to reset frequency every eighth field */
+# define TV_SC_RESET_EVERY_8		(2 << 24)
+/** Sets the subcarrier DDA to never reset the frequency */
+# define TV_SC_RESET_NEVER		(3 << 24)
+/** Sets the peak amplitude of the colorburst.*/
+# define TV_BURST_LEVEL_MASK		0x00ff0000
+# define TV_BURST_LEVEL_SHIFT		16
+/** Sets the increment of the first subcarrier phase generation DDA */
+# define TV_SCDDA1_INC_MASK		0x00000fff
+# define TV_SCDDA1_INC_SHIFT		0
+
+#define TV_SC_CTL_2		0x68064
+/** Sets the rollover for the second subcarrier phase generation DDA */
+# define TV_SCDDA2_SIZE_MASK		0x7fff0000
+# define TV_SCDDA2_SIZE_SHIFT		16
+/** Sets the increent of the second subcarrier phase generation DDA */
+# define TV_SCDDA2_INC_MASK		0x00007fff
+# define TV_SCDDA2_INC_SHIFT		0
+
+#define TV_SC_CTL_3		0x68068
+/** Sets the rollover for the third subcarrier phase generation DDA */
+# define TV_SCDDA3_SIZE_MASK		0x7fff0000
+# define TV_SCDDA3_SIZE_SHIFT		16
+/** Sets the increent of the third subcarrier phase generation DDA */
+# define TV_SCDDA3_INC_MASK		0x00007fff
+# define TV_SCDDA3_INC_SHIFT		0
+
+#define TV_WIN_POS		0x68070
+/** X coordinate of the display from the start of horizontal active */
+# define TV_XPOS_MASK			0x1fff0000
+# define TV_XPOS_SHIFT			16
+/** Y coordinate of the display from the start of vertical active (NBR) */
+# define TV_YPOS_MASK			0x00000fff
+# define TV_YPOS_SHIFT			0
+
+#define TV_WIN_SIZE		0x68074
+/** Horizontal size of the display window, measured in pixels*/
+# define TV_XSIZE_MASK			0x1fff0000
+# define TV_XSIZE_SHIFT			16
+/**
+ * Vertical size of the display window, measured in pixels.
+ *
+ * Must be even for interlaced modes.
+ */
+# define TV_YSIZE_MASK			0x00000fff
+# define TV_YSIZE_SHIFT			0
+
+#define TV_FILTER_CTL_1		0x68080
+/**
+ * Enables automatic scaling calculation.
+ *
+ * If set, the rest of the registers are ignored, and the calculated values can
+ * be read back from the register.
+ */
+# define TV_AUTO_SCALE			(1 << 31)
+/**
+ * Disables the vertical filter.
+ *
+ * This is required on modes more than 1024 pixels wide */
+# define TV_V_FILTER_BYPASS		(1 << 29)
+/** Enables adaptive vertical filtering */
+# define TV_VADAPT			(1 << 28)
+# define TV_VADAPT_MODE_MASK		(3 << 26)
+/** Selects the least adaptive vertical filtering mode */
+# define TV_VADAPT_MODE_LEAST		(0 << 26)
+/** Selects the moderately adaptive vertical filtering mode */
+# define TV_VADAPT_MODE_MODERATE	(1 << 26)
+/** Selects the most adaptive vertical filtering mode */
+# define TV_VADAPT_MODE_MOST		(3 << 26)
+/**
+ * Sets the horizontal scaling factor.
+ *
+ * This should be the fractional part of the horizontal scaling factor divided
+ * by the oversampling rate.  TV_HSCALE should be less than 1, and set to:
+ *
+ * (src width - 1) / ((oversample * dest width) - 1)
+ */
+# define TV_HSCALE_FRAC_MASK		0x00003fff
+# define TV_HSCALE_FRAC_SHIFT		0
+
+#define TV_FILTER_CTL_2		0x68084
+/**
+ * Sets the integer part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1)
+ */
+# define TV_VSCALE_INT_MASK		0x00038000
+# define TV_VSCALE_INT_SHIFT		15
+/**
+ * Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * \sa TV_VSCALE_INT_MASK
+ */
+# define TV_VSCALE_FRAC_MASK		0x00007fff
+# define TV_VSCALE_FRAC_SHIFT		0
+
+#define TV_FILTER_CTL_3		0x68088
+/**
+ * Sets the integer part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1))
+ *
+ * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
+ */
+# define TV_VSCALE_IP_INT_MASK		0x00038000
+# define TV_VSCALE_IP_INT_SHIFT		15
+/**
+ * Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
+ *
+ * \sa TV_VSCALE_IP_INT_MASK
+ */
+# define TV_VSCALE_IP_FRAC_MASK		0x00007fff
+# define TV_VSCALE_IP_FRAC_SHIFT		0
+
+#define TV_CC_CONTROL		0x68090
+# define TV_CC_ENABLE			(1 << 31)
+/**
+ * Specifies which field to send the CC data in.
+ *
+ * CC data is usually sent in field 0.
+ */
+# define TV_CC_FID_MASK			(1 << 27)
+# define TV_CC_FID_SHIFT		27
+/** Sets the horizontal position of the CC data.  Usually 135. */
+# define TV_CC_HOFF_MASK		0x03ff0000
+# define TV_CC_HOFF_SHIFT		16
+/** Sets the vertical position of the CC data.  Usually 21 */
+# define TV_CC_LINE_MASK		0x0000003f
+# define TV_CC_LINE_SHIFT		0
+
+#define TV_CC_DATA		0x68094
+# define TV_CC_RDY			(1 << 31)
+/** Second word of CC data to be transmitted. */
+# define TV_CC_DATA_2_MASK		0x007f0000
+# define TV_CC_DATA_2_SHIFT		16
+/** First word of CC data to be transmitted. */
+# define TV_CC_DATA_1_MASK		0x0000007f
+# define TV_CC_DATA_1_SHIFT		0
+
+#define TV_H_LUMA_0		0x68100
+#define TV_H_LUMA_59		0x681ec
+#define TV_H_CHROMA_0		0x68200
+#define TV_H_CHROMA_59		0x682ec
+#define TV_V_LUMA_0		0x68300
+#define TV_V_LUMA_42		0x683a8
+#define TV_V_CHROMA_0		0x68400
+#define TV_V_CHROMA_42		0x684a8
+
+/* Display Port */
+#define DP_A				0x64000 /* eDP */
+#define DP_B				0x64100
+#define DP_C				0x64200
+#define DP_D				0x64300
+
+#define   DP_PORT_EN			(1 << 31)
+#define   DP_PIPEB_SELECT		(1 << 30)
+#define   DP_PIPE_MASK			(1 << 30)
+
+/* Link training mode - select a suitable mode for each stage */
+#define   DP_LINK_TRAIN_PAT_1		(0 << 28)
+#define   DP_LINK_TRAIN_PAT_2		(1 << 28)
+#define   DP_LINK_TRAIN_PAT_IDLE	(2 << 28)
+#define   DP_LINK_TRAIN_OFF		(3 << 28)
+#define   DP_LINK_TRAIN_MASK		(3 << 28)
+#define   DP_LINK_TRAIN_SHIFT		28
+
+/* CPT Link training mode */
+#define   DP_LINK_TRAIN_PAT_1_CPT	(0 << 8)
+#define   DP_LINK_TRAIN_PAT_2_CPT	(1 << 8)
+#define   DP_LINK_TRAIN_PAT_IDLE_CPT	(2 << 8)
+#define   DP_LINK_TRAIN_OFF_CPT		(3 << 8)
+#define   DP_LINK_TRAIN_MASK_CPT	(7 << 8)
+#define   DP_LINK_TRAIN_SHIFT_CPT	8
+
+/* Signal voltages. These are mostly controlled by the other end */
+#define   DP_VOLTAGE_0_4		(0 << 25)
+#define   DP_VOLTAGE_0_6		(1 << 25)
+#define   DP_VOLTAGE_0_8		(2 << 25)
+#define   DP_VOLTAGE_1_2		(3 << 25)
+#define   DP_VOLTAGE_MASK		(7 << 25)
+#define   DP_VOLTAGE_SHIFT		25
+
+/* Signal pre-emphasis levels, like voltages, the other end tells us what
+ * they want
+ */
+#define   DP_PRE_EMPHASIS_0		(0 << 22)
+#define   DP_PRE_EMPHASIS_3_5		(1 << 22)
+#define   DP_PRE_EMPHASIS_6		(2 << 22)
+#define   DP_PRE_EMPHASIS_9_5		(3 << 22)
+#define   DP_PRE_EMPHASIS_MASK		(7 << 22)
+#define   DP_PRE_EMPHASIS_SHIFT		22
+
+/* How many wires to use. I guess 3 was too hard */
+#define   DP_PORT_WIDTH_1		(0 << 19)
+#define   DP_PORT_WIDTH_2		(1 << 19)
+#define   DP_PORT_WIDTH_4		(3 << 19)
+#define   DP_PORT_WIDTH_MASK		(7 << 19)
+
+/* Mystic DPCD version 1.1 special mode */
+#define   DP_ENHANCED_FRAMING		(1 << 18)
+
+/* eDP */
+#define   DP_PLL_FREQ_270MHZ		(0 << 16)
+#define   DP_PLL_FREQ_160MHZ		(1 << 16)
+#define   DP_PLL_FREQ_MASK		(3 << 16)
+
+/** locked once port is enabled */
+#define   DP_PORT_REVERSAL		(1 << 15)
+
+/* eDP */
+#define   DP_PLL_ENABLE			(1 << 14)
+
+/** sends the clock on lane 15 of the PEG for debug */
+#define   DP_CLOCK_OUTPUT_ENABLE	(1 << 13)
+
+#define   DP_SCRAMBLING_DISABLE		(1 << 12)
+#define   DP_SCRAMBLING_DISABLE_IRONLAKE	(1 << 7)
+
+/** limit RGB values to avoid confusing TVs */
+#define   DP_COLOR_RANGE_16_235		(1 << 8)
+
+/** Turn on the audio link */
+#define   DP_AUDIO_OUTPUT_ENABLE	(1 << 6)
+
+/** vs and hs sync polarity */
+#define   DP_SYNC_VS_HIGH		(1 << 4)
+#define   DP_SYNC_HS_HIGH		(1 << 3)
+
+/** A fantasy */
+#define   DP_DETECTED			(1 << 2)
+
+/** The aux channel provides a way to talk to the
+ * signal sink for DDC etc. Max packet size supported
+ * is 20 bytes in each direction, hence the 5 fixed
+ * data registers
+ */
+#define DPA_AUX_CH_CTL			0x64010
+#define DPA_AUX_CH_DATA1		0x64014
+#define DPA_AUX_CH_DATA2		0x64018
+#define DPA_AUX_CH_DATA3		0x6401c
+#define DPA_AUX_CH_DATA4		0x64020
+#define DPA_AUX_CH_DATA5		0x64024
+
+#define DPB_AUX_CH_CTL			0x64110
+#define DPB_AUX_CH_DATA1		0x64114
+#define DPB_AUX_CH_DATA2		0x64118
+#define DPB_AUX_CH_DATA3		0x6411c
+#define DPB_AUX_CH_DATA4		0x64120
+#define DPB_AUX_CH_DATA5		0x64124
+
+#define DPC_AUX_CH_CTL			0x64210
+#define DPC_AUX_CH_DATA1		0x64214
+#define DPC_AUX_CH_DATA2		0x64218
+#define DPC_AUX_CH_DATA3		0x6421c
+#define DPC_AUX_CH_DATA4		0x64220
+#define DPC_AUX_CH_DATA5		0x64224
+
+#define DPD_AUX_CH_CTL			0x64310
+#define DPD_AUX_CH_DATA1		0x64314
+#define DPD_AUX_CH_DATA2		0x64318
+#define DPD_AUX_CH_DATA3		0x6431c
+#define DPD_AUX_CH_DATA4		0x64320
+#define DPD_AUX_CH_DATA5		0x64324
+
+#define   DP_AUX_CH_CTL_SEND_BUSY	    (1 << 31)
+#define   DP_AUX_CH_CTL_DONE		    (1 << 30)
+#define   DP_AUX_CH_CTL_INTERRUPT	    (1 << 29)
+#define   DP_AUX_CH_CTL_TIME_OUT_ERROR	    (1 << 28)
+#define   DP_AUX_CH_CTL_TIME_OUT_400us	    (0 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_600us	    (1 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_800us	    (2 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_1600us	    (3 << 26)
+#define   DP_AUX_CH_CTL_TIME_OUT_MASK	    (3 << 26)
+#define   DP_AUX_CH_CTL_RECEIVE_ERROR	    (1 << 25)
+#define   DP_AUX_CH_CTL_MESSAGE_SIZE_MASK    (0x1f << 20)
+#define   DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT   20
+#define   DP_AUX_CH_CTL_PRECHARGE_2US_MASK   (0xf << 16)
+#define   DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT  16
+#define   DP_AUX_CH_CTL_AUX_AKSV_SELECT	    (1 << 15)
+#define   DP_AUX_CH_CTL_MANCHESTER_TEST	    (1 << 14)
+#define   DP_AUX_CH_CTL_SYNC_TEST	    (1 << 13)
+#define   DP_AUX_CH_CTL_DEGLITCH_TEST	    (1 << 12)
+#define   DP_AUX_CH_CTL_PRECHARGE_TEST	    (1 << 11)
+#define   DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK    (0x7ff)
+#define   DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT   0
+
+/*
+ * Computing GMCH M and N values for the Display Port link
+ *
+ * GMCH M/N = dot clock * bytes per pixel / ls_clk * # of lanes
+ *
+ * ls_clk (we assume) is the DP link clock (1.62 or 2.7 GHz)
+ *
+ * The GMCH value is used internally
+ *
+ * bytes_per_pixel is the number of bytes coming out of the plane,
+ * which is after the LUTs, so we want the bytes for our color format.
+ * For our current usage, this is always 3, one byte for R, G and B.
+ */
+#define _PIPEA_GMCH_DATA_M			0x70050
+#define _PIPEB_GMCH_DATA_M			0x71050
+
+/* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */
+#define   PIPE_GMCH_DATA_M_TU_SIZE_MASK		(0x3f << 25)
+#define   PIPE_GMCH_DATA_M_TU_SIZE_SHIFT	25
+
+#define   PIPE_GMCH_DATA_M_MASK			(0xffffff)
+
+#define _PIPEA_GMCH_DATA_N			0x70054
+#define _PIPEB_GMCH_DATA_N			0x71054
+#define   PIPE_GMCH_DATA_N_MASK			(0xffffff)
+
+/*
+ * Computing Link M and N values for the Display Port link
+ *
+ * Link M / N = pixel_clock / ls_clk
+ *
+ * (the DP spec calls pixel_clock the 'strm_clk')
+ *
+ * The Link value is transmitted in the Main Stream
+ * Attributes and VB-ID.
+ */
+
+#define _PIPEA_DP_LINK_M				0x70060
+#define _PIPEB_DP_LINK_M				0x71060
+#define   PIPEA_DP_LINK_M_MASK			(0xffffff)
+
+#define _PIPEA_DP_LINK_N				0x70064
+#define _PIPEB_DP_LINK_N				0x71064
+#define   PIPEA_DP_LINK_N_MASK			(0xffffff)
+
+#define PIPE_GMCH_DATA_M(pipe) _PIPE(pipe, _PIPEA_GMCH_DATA_M, _PIPEB_GMCH_DATA_M)
+#define PIPE_GMCH_DATA_N(pipe) _PIPE(pipe, _PIPEA_GMCH_DATA_N, _PIPEB_GMCH_DATA_N)
+#define PIPE_DP_LINK_M(pipe) _PIPE(pipe, _PIPEA_DP_LINK_M, _PIPEB_DP_LINK_M)
+#define PIPE_DP_LINK_N(pipe) _PIPE(pipe, _PIPEA_DP_LINK_N, _PIPEB_DP_LINK_N)
+
+/* Display & cursor control */
+
+/* Pipe A */
+#define _PIPEADSL		0x70000
+#define   DSL_LINEMASK		0x00000fff
+#define _PIPEACONF		0x70008
+#define   PIPECONF_ENABLE	(1<<31)
+#define   PIPECONF_DISABLE	0
+#define   PIPECONF_DOUBLE_WIDE	(1<<30)
+#define   I965_PIPECONF_ACTIVE	(1<<30)
+#define   PIPECONF_FRAME_START_DELAY_MASK (3<<27)
+#define   PIPECONF_SINGLE_WIDE	0
+#define   PIPECONF_PIPE_UNLOCKED 0
+#define   PIPECONF_PIPE_LOCKED	(1<<25)
+#define   PIPECONF_PALETTE	0
+#define   PIPECONF_GAMMA		(1<<24)
+#define   PIPECONF_FORCE_BORDER	(1<<25)
+#define   PIPECONF_INTERLACE_MASK	(7 << 21)
+/* Note that pre-gen3 does not support interlaced display directly. Panel
+ * fitting must be disabled on pre-ilk for interlaced. */
+#define   PIPECONF_PROGRESSIVE			(0 << 21)
+#define   PIPECONF_INTERLACE_W_SYNC_SHIFT_PANEL	(4 << 21) /* gen4 only */
+#define   PIPECONF_INTERLACE_W_SYNC_SHIFT	(5 << 21) /* gen4 only */
+#define   PIPECONF_INTERLACE_W_FIELD_INDICATION	(6 << 21)
+#define   PIPECONF_INTERLACE_FIELD_0_ONLY	(7 << 21) /* gen3 only */
+/* Ironlake and later have a complete new set of values for interlaced. PFIT
+ * means panel fitter required, PF means progressive fetch, DBL means power
+ * saving pixel doubling. */
+#define   PIPECONF_PFIT_PF_INTERLACED_ILK	(1 << 21)
+#define   PIPECONF_INTERLACED_ILK		(3 << 21)
+#define   PIPECONF_INTERLACED_DBL_ILK		(4 << 21) /* ilk/snb only */
+#define   PIPECONF_PFIT_PF_INTERLACED_DBL_ILK	(5 << 21) /* ilk/snb only */
+#define   PIPECONF_CXSR_DOWNCLOCK	(1<<16)
+#define   PIPECONF_BPP_MASK	(0x000000e0)
+#define   PIPECONF_BPP_8	(0<<5)
+#define   PIPECONF_BPP_10	(1<<5)
+#define   PIPECONF_BPP_6	(2<<5)
+#define   PIPECONF_BPP_12	(3<<5)
+#define   PIPECONF_DITHER_EN	(1<<4)
+#define   PIPECONF_DITHER_TYPE_MASK (0x0000000c)
+#define   PIPECONF_DITHER_TYPE_SP (0<<2)
+#define   PIPECONF_DITHER_TYPE_ST1 (1<<2)
+#define   PIPECONF_DITHER_TYPE_ST2 (2<<2)
+#define   PIPECONF_DITHER_TYPE_TEMP (3<<2)
+#define _PIPEASTAT		0x70024
+#define   PIPE_FIFO_UNDERRUN_STATUS		(1UL<<31)
+#define   PIPE_CRC_ERROR_ENABLE			(1UL<<29)
+#define   PIPE_CRC_DONE_ENABLE			(1UL<<28)
+#define   PIPE_GMBUS_EVENT_ENABLE		(1UL<<27)
+#define   PIPE_HOTPLUG_INTERRUPT_ENABLE		(1UL<<26)
+#define   PIPE_VSYNC_INTERRUPT_ENABLE		(1UL<<25)
+#define   PIPE_DISPLAY_LINE_COMPARE_ENABLE	(1UL<<24)
+#define   PIPE_DPST_EVENT_ENABLE		(1UL<<23)
+#define   PIPE_LEGACY_BLC_EVENT_ENABLE		(1UL<<22)
+#define   PIPE_ODD_FIELD_INTERRUPT_ENABLE	(1UL<<21)
+#define   PIPE_EVEN_FIELD_INTERRUPT_ENABLE	(1UL<<20)
+#define   PIPE_HOTPLUG_TV_INTERRUPT_ENABLE	(1UL<<18) /* pre-965 */
+#define   PIPE_START_VBLANK_INTERRUPT_ENABLE	(1UL<<18) /* 965 or later */
+#define   PIPE_VBLANK_INTERRUPT_ENABLE		(1UL<<17)
+#define   PIPE_OVERLAY_UPDATED_ENABLE		(1UL<<16)
+#define   PIPE_CRC_ERROR_INTERRUPT_STATUS	(1UL<<13)
+#define   PIPE_CRC_DONE_INTERRUPT_STATUS	(1UL<<12)
+#define   PIPE_GMBUS_INTERRUPT_STATUS		(1UL<<11)
+#define   PIPE_HOTPLUG_INTERRUPT_STATUS		(1UL<<10)
+#define   PIPE_VSYNC_INTERRUPT_STATUS		(1UL<<9)
+#define   PIPE_DISPLAY_LINE_COMPARE_STATUS	(1UL<<8)
+#define   PIPE_DPST_EVENT_STATUS		(1UL<<7)
+#define   PIPE_LEGACY_BLC_EVENT_STATUS		(1UL<<6)
+#define   PIPE_ODD_FIELD_INTERRUPT_STATUS	(1UL<<5)
+#define   PIPE_EVEN_FIELD_INTERRUPT_STATUS	(1UL<<4)
+#define   PIPE_HOTPLUG_TV_INTERRUPT_STATUS	(1UL<<2) /* pre-965 */
+#define   PIPE_START_VBLANK_INTERRUPT_STATUS	(1UL<<2) /* 965 or later */
+#define   PIPE_VBLANK_INTERRUPT_STATUS		(1UL<<1)
+#define   PIPE_OVERLAY_UPDATED_STATUS		(1UL<<0)
+#define   PIPE_BPC_MASK				(7 << 5) /* Ironlake */
+#define   PIPE_8BPC				(0 << 5)
+#define   PIPE_10BPC				(1 << 5)
+#define   PIPE_6BPC				(2 << 5)
+#define   PIPE_12BPC				(3 << 5)
+
+#define PIPESRC(pipe) _PIPE(pipe, _PIPEASRC, _PIPEBSRC)
+#define PIPECONF(pipe) _PIPE(pipe, _PIPEACONF, _PIPEBCONF)
+#define PIPEDSL(pipe)  _PIPE(pipe, _PIPEADSL, _PIPEBDSL)
+#define PIPEFRAME(pipe) _PIPE(pipe, _PIPEAFRAMEHIGH, _PIPEBFRAMEHIGH)
+#define PIPEFRAMEPIXEL(pipe)  _PIPE(pipe, _PIPEAFRAMEPIXEL, _PIPEBFRAMEPIXEL)
+#define PIPESTAT(pipe) _PIPE(pipe, _PIPEASTAT, _PIPEBSTAT)
+
+#define DSPARB			0x70030
+#define   DSPARB_CSTART_MASK	(0x7f << 7)
+#define   DSPARB_CSTART_SHIFT	7
+#define   DSPARB_BSTART_MASK	(0x7f)
+#define   DSPARB_BSTART_SHIFT	0
+#define   DSPARB_BEND_SHIFT	9 /* on 855 */
+#define   DSPARB_AEND_SHIFT	0
+
+#define DSPFW1			0x70034
+#define   DSPFW_SR_SHIFT	23
+#define   DSPFW_SR_MASK		(0x1ff<<23)
+#define   DSPFW_CURSORB_SHIFT	16
+#define   DSPFW_CURSORB_MASK	(0x3f<<16)
+#define   DSPFW_PLANEB_SHIFT	8
+#define   DSPFW_PLANEB_MASK	(0x7f<<8)
+#define   DSPFW_PLANEA_MASK	(0x7f)
+#define DSPFW2			0x70038
+#define   DSPFW_CURSORA_MASK	0x00003f00
+#define   DSPFW_CURSORA_SHIFT	8
+#define   DSPFW_PLANEC_MASK	(0x7f)
+#define DSPFW3			0x7003c
+#define   DSPFW_HPLL_SR_EN	(1<<31)
+#define   DSPFW_CURSOR_SR_SHIFT	24
+#define   PINEVIEW_SELF_REFRESH_EN	(1<<30)
+#define   DSPFW_CURSOR_SR_MASK		(0x3f<<24)
+#define   DSPFW_HPLL_CURSOR_SHIFT	16
+#define   DSPFW_HPLL_CURSOR_MASK	(0x3f<<16)
+#define   DSPFW_HPLL_SR_MASK		(0x1ff)
+
+/* FIFO watermark sizes etc */
+#define G4X_FIFO_LINE_SIZE	64
+#define I915_FIFO_LINE_SIZE	64
+#define I830_FIFO_LINE_SIZE	32
+
+#define G4X_FIFO_SIZE		127
+#define I965_FIFO_SIZE		512
+#define I945_FIFO_SIZE		127
+#define I915_FIFO_SIZE		95
+#define I855GM_FIFO_SIZE	127 /* In cachelines */
+#define I830_FIFO_SIZE		95
+
+#define G4X_MAX_WM		0x3f
+#define I915_MAX_WM		0x3f
+
+#define PINEVIEW_DISPLAY_FIFO	512 /* in 64byte unit */
+#define PINEVIEW_FIFO_LINE_SIZE	64
+#define PINEVIEW_MAX_WM		0x1ff
+#define PINEVIEW_DFT_WM		0x3f
+#define PINEVIEW_DFT_HPLLOFF_WM	0
+#define PINEVIEW_GUARD_WM		10
+#define PINEVIEW_CURSOR_FIFO		64
+#define PINEVIEW_CURSOR_MAX_WM	0x3f
+#define PINEVIEW_CURSOR_DFT_WM	0
+#define PINEVIEW_CURSOR_GUARD_WM	5
+
+#define I965_CURSOR_FIFO	64
+#define I965_CURSOR_MAX_WM	32
+#define I965_CURSOR_DFT_WM	8
+
+/* define the Watermark register on Ironlake */
+#define WM0_PIPEA_ILK		0x45100
+#define  WM0_PIPE_PLANE_MASK	(0x7f<<16)
+#define  WM0_PIPE_PLANE_SHIFT	16
+#define  WM0_PIPE_SPRITE_MASK	(0x3f<<8)
+#define  WM0_PIPE_SPRITE_SHIFT	8
+#define  WM0_PIPE_CURSOR_MASK	(0x1f)
+
+#define WM0_PIPEB_ILK		0x45104
+#define WM0_PIPEC_IVB		0x45200
+#define WM1_LP_ILK		0x45108
+#define  WM1_LP_SR_EN		(1<<31)
+#define  WM1_LP_LATENCY_SHIFT	24
+#define  WM1_LP_LATENCY_MASK	(0x7f<<24)
+#define  WM1_LP_FBC_MASK	(0xf<<20)
+#define  WM1_LP_FBC_SHIFT	20
+#define  WM1_LP_SR_MASK		(0x1ff<<8)
+#define  WM1_LP_SR_SHIFT	8
+#define  WM1_LP_CURSOR_MASK	(0x3f)
+#define WM2_LP_ILK		0x4510c
+#define  WM2_LP_EN		(1<<31)
+#define WM3_LP_ILK		0x45110
+#define  WM3_LP_EN		(1<<31)
+#define WM1S_LP_ILK		0x45120
+#define WM2S_LP_IVB		0x45124
+#define WM3S_LP_IVB		0x45128
+#define  WM1S_LP_EN		(1<<31)
+
+/* Memory latency timer register */
+#define MLTR_ILK		0x11222
+#define  MLTR_WM1_SHIFT		0
+#define  MLTR_WM2_SHIFT		8
+/* the unit of memory self-refresh latency time is 0.5us */
+#define  ILK_SRLT_MASK		0x3f
+#define ILK_LATENCY(shift)	(I915_READ(MLTR_ILK) >> (shift) & ILK_SRLT_MASK)
+#define ILK_READ_WM1_LATENCY()	ILK_LATENCY(MLTR_WM1_SHIFT)
+#define ILK_READ_WM2_LATENCY()	ILK_LATENCY(MLTR_WM2_SHIFT)
+
+/* define the fifo size on Ironlake */
+#define ILK_DISPLAY_FIFO	128
+#define ILK_DISPLAY_MAXWM	64
+#define ILK_DISPLAY_DFTWM	8
+#define ILK_CURSOR_FIFO		32
+#define ILK_CURSOR_MAXWM	16
+#define ILK_CURSOR_DFTWM	8
+
+#define ILK_DISPLAY_SR_FIFO	512
+#define ILK_DISPLAY_MAX_SRWM	0x1ff
+#define ILK_DISPLAY_DFT_SRWM	0x3f
+#define ILK_CURSOR_SR_FIFO	64
+#define ILK_CURSOR_MAX_SRWM	0x3f
+#define ILK_CURSOR_DFT_SRWM	8
+
+#define ILK_FIFO_LINE_SIZE	64
+
+/* define the WM info on Sandybridge */
+#define SNB_DISPLAY_FIFO	128
+#define SNB_DISPLAY_MAXWM	0x7f	/* bit 16:22 */
+#define SNB_DISPLAY_DFTWM	8
+#define SNB_CURSOR_FIFO		32
+#define SNB_CURSOR_MAXWM	0x1f	/* bit 4:0 */
+#define SNB_CURSOR_DFTWM	8
+
+#define SNB_DISPLAY_SR_FIFO	512
+#define SNB_DISPLAY_MAX_SRWM	0x1ff	/* bit 16:8 */
+#define SNB_DISPLAY_DFT_SRWM	0x3f
+#define SNB_CURSOR_SR_FIFO	64
+#define SNB_CURSOR_MAX_SRWM	0x3f	/* bit 5:0 */
+#define SNB_CURSOR_DFT_SRWM	8
+
+#define SNB_FBC_MAX_SRWM	0xf	/* bit 23:20 */
+
+#define SNB_FIFO_LINE_SIZE	64
+
+
+/* the address where we get all kinds of latency value */
+#define SSKPD			0x5d10
+#define SSKPD_WM_MASK		0x3f
+#define SSKPD_WM0_SHIFT		0
+#define SSKPD_WM1_SHIFT		8
+#define SSKPD_WM2_SHIFT		16
+#define SSKPD_WM3_SHIFT		24
+
+#define SNB_LATENCY(shift)	(I915_READ(MCHBAR_MIRROR_BASE_SNB + SSKPD) >> (shift) & SSKPD_WM_MASK)
+#define SNB_READ_WM0_LATENCY()		SNB_LATENCY(SSKPD_WM0_SHIFT)
+#define SNB_READ_WM1_LATENCY()		SNB_LATENCY(SSKPD_WM1_SHIFT)
+#define SNB_READ_WM2_LATENCY()		SNB_LATENCY(SSKPD_WM2_SHIFT)
+#define SNB_READ_WM3_LATENCY()		SNB_LATENCY(SSKPD_WM3_SHIFT)
+
+/*
+ * The two pipe frame counter registers are not synchronized, so
+ * reading a stable value is somewhat tricky. The following code
+ * should work:
+ *
+ *  do {
+ *    high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
+ *             PIPE_FRAME_HIGH_SHIFT;
+ *    low1 =  ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >>
+ *             PIPE_FRAME_LOW_SHIFT);
+ *    high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
+ *             PIPE_FRAME_HIGH_SHIFT);
+ *  } while (high1 != high2);
+ *  frame = (high1 << 8) | low1;
+ */
+#define _PIPEAFRAMEHIGH          0x70040
+#define   PIPE_FRAME_HIGH_MASK    0x0000ffff
+#define   PIPE_FRAME_HIGH_SHIFT   0
+#define _PIPEAFRAMEPIXEL         0x70044
+#define   PIPE_FRAME_LOW_MASK     0xff000000
+#define   PIPE_FRAME_LOW_SHIFT    24
+#define   PIPE_PIXEL_MASK         0x00ffffff
+#define   PIPE_PIXEL_SHIFT        0
+/* GM45+ just has to be different */
+#define _PIPEA_FRMCOUNT_GM45	0x70040
+#define _PIPEA_FLIPCOUNT_GM45	0x70044
+#define PIPE_FRMCOUNT_GM45(pipe) _PIPE(pipe, _PIPEA_FRMCOUNT_GM45, _PIPEB_FRMCOUNT_GM45)
+
+/* Cursor A & B regs */
+#define _CURACNTR		0x70080
+/* Old style CUR*CNTR flags (desktop 8xx) */
+#define   CURSOR_ENABLE		0x80000000
+#define   CURSOR_GAMMA_ENABLE	0x40000000
+#define   CURSOR_STRIDE_MASK	0x30000000
+#define   CURSOR_FORMAT_SHIFT	24
+#define   CURSOR_FORMAT_MASK	(0x07 << CURSOR_FORMAT_SHIFT)
+#define   CURSOR_FORMAT_2C	(0x00 << CURSOR_FORMAT_SHIFT)
+#define   CURSOR_FORMAT_3C	(0x01 << CURSOR_FORMAT_SHIFT)
+#define   CURSOR_FORMAT_4C	(0x02 << CURSOR_FORMAT_SHIFT)
+#define   CURSOR_FORMAT_ARGB	(0x04 << CURSOR_FORMAT_SHIFT)
+#define   CURSOR_FORMAT_XRGB	(0x05 << CURSOR_FORMAT_SHIFT)
+/* New style CUR*CNTR flags */
+#define   CURSOR_MODE		0x27
+#define   CURSOR_MODE_DISABLE   0x00
+#define   CURSOR_MODE_64_32B_AX 0x07
+#define   CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
+#define   MCURSOR_PIPE_SELECT	(1 << 28)
+#define   MCURSOR_PIPE_A	0x00
+#define   MCURSOR_PIPE_B	(1 << 28)
+#define   MCURSOR_GAMMA_ENABLE  (1 << 26)
+#define _CURABASE		0x70084
+#define _CURAPOS			0x70088
+#define   CURSOR_POS_MASK       0x007FF
+#define   CURSOR_POS_SIGN       0x8000
+#define   CURSOR_X_SHIFT        0
+#define   CURSOR_Y_SHIFT        16
+#define CURSIZE			0x700a0
+#define _CURBCNTR		0x700c0
+#define _CURBBASE		0x700c4
+#define _CURBPOS			0x700c8
+
+#define _CURBCNTR_IVB		0x71080
+#define _CURBBASE_IVB		0x71084
+#define _CURBPOS_IVB		0x71088
+
+#define CURCNTR(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR)
+#define CURBASE(pipe) _PIPE(pipe, _CURABASE, _CURBBASE)
+#define CURPOS(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS)
+
+#define CURCNTR_IVB(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR_IVB)
+#define CURBASE_IVB(pipe) _PIPE(pipe, _CURABASE, _CURBBASE_IVB)
+#define CURPOS_IVB(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS_IVB)
+
+/* Display A control */
+#define _DSPACNTR                0x70180
+#define   DISPLAY_PLANE_ENABLE			(1<<31)
+#define   DISPLAY_PLANE_DISABLE			0
+#define   DISPPLANE_GAMMA_ENABLE		(1<<30)
+#define   DISPPLANE_GAMMA_DISABLE		0
+#define   DISPPLANE_PIXFORMAT_MASK		(0xf<<26)
+#define   DISPPLANE_8BPP			(0x2<<26)
+#define   DISPPLANE_15_16BPP			(0x4<<26)
+#define   DISPPLANE_16BPP			(0x5<<26)
+#define   DISPPLANE_32BPP_NO_ALPHA		(0x6<<26)
+#define   DISPPLANE_32BPP			(0x7<<26)
+#define   DISPPLANE_32BPP_30BIT_NO_ALPHA	(0xa<<26)
+#define   DISPPLANE_STEREO_ENABLE		(1<<25)
+#define   DISPPLANE_STEREO_DISABLE		0
+#define   DISPPLANE_SEL_PIPE_SHIFT		24
+#define   DISPPLANE_SEL_PIPE_MASK		(3<<DISPPLANE_SEL_PIPE_SHIFT)
+#define   DISPPLANE_SEL_PIPE_A			0
+#define   DISPPLANE_SEL_PIPE_B			(1<<DISPPLANE_SEL_PIPE_SHIFT)
+#define   DISPPLANE_SRC_KEY_ENABLE		(1<<22)
+#define   DISPPLANE_SRC_KEY_DISABLE		0
+#define   DISPPLANE_LINE_DOUBLE			(1<<20)
+#define   DISPPLANE_NO_LINE_DOUBLE		0
+#define   DISPPLANE_STEREO_POLARITY_FIRST	0
+#define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+#define   DISPPLANE_TRICKLE_FEED_DISABLE	(1<<14) /* Ironlake */
+#define   DISPPLANE_TILED			(1<<10)
+#define _DSPAADDR		0x70184
+#define _DSPASTRIDE		0x70188
+#define _DSPAPOS			0x7018C /* reserved */
+#define _DSPASIZE		0x70190
+#define _DSPASURF		0x7019C /* 965+ only */
+#define _DSPATILEOFF		0x701A4 /* 965+ only */
+
+#define DSPCNTR(plane) _PIPE(plane, _DSPACNTR, _DSPBCNTR)
+#define DSPADDR(plane) _PIPE(plane, _DSPAADDR, _DSPBADDR)
+#define DSPSTRIDE(plane) _PIPE(plane, _DSPASTRIDE, _DSPBSTRIDE)
+#define DSPPOS(plane) _PIPE(plane, _DSPAPOS, _DSPBPOS)
+#define DSPSIZE(plane) _PIPE(plane, _DSPASIZE, _DSPBSIZE)
+#define DSPSURF(plane) _PIPE(plane, _DSPASURF, _DSPBSURF)
+#define DSPTILEOFF(plane) _PIPE(plane, _DSPATILEOFF, _DSPBTILEOFF)
+
+/* VBIOS flags */
+#define SWF00			0x71410
+#define SWF01			0x71414
+#define SWF02			0x71418
+#define SWF03			0x7141c
+#define SWF04			0x71420
+#define SWF05			0x71424
+#define SWF06			0x71428
+#define SWF10			0x70410
+#define SWF11			0x70414
+#define SWF14			0x71420
+#define SWF30			0x72414
+#define SWF31			0x72418
+#define SWF32			0x7241c
+
+/* Pipe B */
+#define _PIPEBDSL		0x71000
+#define _PIPEBCONF		0x71008
+#define _PIPEBSTAT		0x71024
+#define _PIPEBFRAMEHIGH		0x71040
+#define _PIPEBFRAMEPIXEL		0x71044
+#define _PIPEB_FRMCOUNT_GM45	0x71040
+#define _PIPEB_FLIPCOUNT_GM45	0x71044
+
+
+/* Display B control */
+#define _DSPBCNTR		0x71180
+#define   DISPPLANE_ALPHA_TRANS_ENABLE		(1<<15)
+#define   DISPPLANE_ALPHA_TRANS_DISABLE		0
+#define   DISPPLANE_SPRITE_ABOVE_DISPLAY	0
+#define   DISPPLANE_SPRITE_ABOVE_OVERLAY	(1)
+#define _DSPBADDR		0x71184
+#define _DSPBSTRIDE		0x71188
+#define _DSPBPOS			0x7118C
+#define _DSPBSIZE		0x71190
+#define _DSPBSURF		0x7119C
+#define _DSPBTILEOFF		0x711A4
+
+/* Sprite A control */
+#define _DVSACNTR		0x72180
+#define   DVS_ENABLE		(1<<31)
+#define   DVS_GAMMA_ENABLE	(1<<30)
+#define   DVS_PIXFORMAT_MASK	(3<<25)
+#define   DVS_FORMAT_YUV422	(0<<25)
+#define   DVS_FORMAT_RGBX101010	(1<<25)
+#define   DVS_FORMAT_RGBX888	(2<<25)
+#define   DVS_FORMAT_RGBX161616	(3<<25)
+#define   DVS_SOURCE_KEY	(1<<22)
+#define   DVS_RGB_ORDER_XBGR	(1<<20)
+#define   DVS_YUV_BYTE_ORDER_MASK (3<<16)
+#define   DVS_YUV_ORDER_YUYV	(0<<16)
+#define   DVS_YUV_ORDER_UYVY	(1<<16)
+#define   DVS_YUV_ORDER_YVYU	(2<<16)
+#define   DVS_YUV_ORDER_VYUY	(3<<16)
+#define   DVS_DEST_KEY		(1<<2)
+#define   DVS_TRICKLE_FEED_DISABLE (1<<14)
+#define   DVS_TILED		(1<<10)
+#define _DVSALINOFF		0x72184
+#define _DVSASTRIDE		0x72188
+#define _DVSAPOS		0x7218c
+#define _DVSASIZE		0x72190
+#define _DVSAKEYVAL		0x72194
+#define _DVSAKEYMSK		0x72198
+#define _DVSASURF		0x7219c
+#define _DVSAKEYMAXVAL		0x721a0
+#define _DVSATILEOFF		0x721a4
+#define _DVSASURFLIVE		0x721ac
+#define _DVSASCALE		0x72204
+#define   DVS_SCALE_ENABLE	(1<<31)
+#define   DVS_FILTER_MASK	(3<<29)
+#define   DVS_FILTER_MEDIUM	(0<<29)
+#define   DVS_FILTER_ENHANCING	(1<<29)
+#define   DVS_FILTER_SOFTENING	(2<<29)
+#define   DVS_VERTICAL_OFFSET_HALF (1<<28) /* must be enabled below */
+#define   DVS_VERTICAL_OFFSET_ENABLE (1<<27)
+#define _DVSAGAMC		0x72300
+
+#define _DVSBCNTR		0x73180
+#define _DVSBLINOFF		0x73184
+#define _DVSBSTRIDE		0x73188
+#define _DVSBPOS		0x7318c
+#define _DVSBSIZE		0x73190
+#define _DVSBKEYVAL		0x73194
+#define _DVSBKEYMSK		0x73198
+#define _DVSBSURF		0x7319c
+#define _DVSBKEYMAXVAL		0x731a0
+#define _DVSBTILEOFF		0x731a4
+#define _DVSBSURFLIVE		0x731ac
+#define _DVSBSCALE		0x73204
+#define _DVSBGAMC		0x73300
+
+#define DVSCNTR(pipe) _PIPE(pipe, _DVSACNTR, _DVSBCNTR)
+#define DVSLINOFF(pipe) _PIPE(pipe, _DVSALINOFF, _DVSBLINOFF)
+#define DVSSTRIDE(pipe) _PIPE(pipe, _DVSASTRIDE, _DVSBSTRIDE)
+#define DVSPOS(pipe) _PIPE(pipe, _DVSAPOS, _DVSBPOS)
+#define DVSSURF(pipe) _PIPE(pipe, _DVSASURF, _DVSBSURF)
+#define DVSKEYMAX(pipe) _PIPE(pipe, _DVSAKEYMAXVAL, _DVSBKEYMAXVAL)
+#define DVSSIZE(pipe) _PIPE(pipe, _DVSASIZE, _DVSBSIZE)
+#define DVSSCALE(pipe) _PIPE(pipe, _DVSASCALE, _DVSBSCALE)
+#define DVSTILEOFF(pipe) _PIPE(pipe, _DVSATILEOFF, _DVSBTILEOFF)
+#define DVSKEYVAL(pipe) _PIPE(pipe, _DVSAKEYVAL, _DVSBKEYVAL)
+#define DVSKEYMSK(pipe) _PIPE(pipe, _DVSAKEYMSK, _DVSBKEYMSK)
+
+#define _SPRA_CTL		0x70280
+#define   SPRITE_ENABLE			(1<<31)
+#define   SPRITE_GAMMA_ENABLE		(1<<30)
+#define   SPRITE_PIXFORMAT_MASK		(7<<25)
+#define   SPRITE_FORMAT_YUV422		(0<<25)
+#define   SPRITE_FORMAT_RGBX101010	(1<<25)
+#define   SPRITE_FORMAT_RGBX888		(2<<25)
+#define   SPRITE_FORMAT_RGBX161616	(3<<25)
+#define   SPRITE_FORMAT_YUV444		(4<<25)
+#define   SPRITE_FORMAT_XR_BGR101010	(5<<25) /* Extended range */
+#define   SPRITE_CSC_ENABLE		(1<<24)
+#define   SPRITE_SOURCE_KEY		(1<<22)
+#define   SPRITE_RGB_ORDER_RGBX		(1<<20) /* only for 888 and 161616 */
+#define   SPRITE_YUV_TO_RGB_CSC_DISABLE	(1<<19)
+#define   SPRITE_YUV_CSC_FORMAT_BT709	(1<<18) /* 0 is BT601 */
+#define   SPRITE_YUV_BYTE_ORDER_MASK	(3<<16)
+#define   SPRITE_YUV_ORDER_YUYV		(0<<16)
+#define   SPRITE_YUV_ORDER_UYVY		(1<<16)
+#define   SPRITE_YUV_ORDER_YVYU		(2<<16)
+#define   SPRITE_YUV_ORDER_VYUY		(3<<16)
+#define   SPRITE_TRICKLE_FEED_DISABLE	(1<<14)
+#define   SPRITE_INT_GAMMA_ENABLE	(1<<13)
+#define   SPRITE_TILED			(1<<10)
+#define   SPRITE_DEST_KEY		(1<<2)
+#define _SPRA_LINOFF		0x70284
+#define _SPRA_STRIDE		0x70288
+#define _SPRA_POS		0x7028c
+#define _SPRA_SIZE		0x70290
+#define _SPRA_KEYVAL		0x70294
+#define _SPRA_KEYMSK		0x70298
+#define _SPRA_SURF		0x7029c
+#define _SPRA_KEYMAX		0x702a0
+#define _SPRA_TILEOFF		0x702a4
+#define _SPRA_SCALE		0x70304
+#define   SPRITE_SCALE_ENABLE	(1<<31)
+#define   SPRITE_FILTER_MASK	(3<<29)
+#define   SPRITE_FILTER_MEDIUM	(0<<29)
+#define   SPRITE_FILTER_ENHANCING	(1<<29)
+#define   SPRITE_FILTER_SOFTENING	(2<<29)
+#define   SPRITE_VERTICAL_OFFSET_HALF	(1<<28) /* must be enabled below */
+#define   SPRITE_VERTICAL_OFFSET_ENABLE	(1<<27)
+#define _SPRA_GAMC		0x70400
+
+#define _SPRB_CTL		0x71280
+#define _SPRB_LINOFF		0x71284
+#define _SPRB_STRIDE		0x71288
+#define _SPRB_POS		0x7128c
+#define _SPRB_SIZE		0x71290
+#define _SPRB_KEYVAL		0x71294
+#define _SPRB_KEYMSK		0x71298
+#define _SPRB_SURF		0x7129c
+#define _SPRB_KEYMAX		0x712a0
+#define _SPRB_TILEOFF		0x712a4
+#define _SPRB_SCALE		0x71304
+#define _SPRB_GAMC		0x71400
+
+#define SPRCTL(pipe) _PIPE(pipe, _SPRA_CTL, _SPRB_CTL)
+#define SPRLINOFF(pipe) _PIPE(pipe, _SPRA_LINOFF, _SPRB_LINOFF)
+#define SPRSTRIDE(pipe) _PIPE(pipe, _SPRA_STRIDE, _SPRB_STRIDE)
+#define SPRPOS(pipe) _PIPE(pipe, _SPRA_POS, _SPRB_POS)
+#define SPRSIZE(pipe) _PIPE(pipe, _SPRA_SIZE, _SPRB_SIZE)
+#define SPRKEYVAL(pipe) _PIPE(pipe, _SPRA_KEYVAL, _SPRB_KEYVAL)
+#define SPRKEYMSK(pipe) _PIPE(pipe, _SPRA_KEYMSK, _SPRB_KEYMSK)
+#define SPRSURF(pipe) _PIPE(pipe, _SPRA_SURF, _SPRB_SURF)
+#define SPRKEYMAX(pipe) _PIPE(pipe, _SPRA_KEYMAX, _SPRB_KEYMAX)
+#define SPRTILEOFF(pipe) _PIPE(pipe, _SPRA_TILEOFF, _SPRB_TILEOFF)
+#define SPRSCALE(pipe) _PIPE(pipe, _SPRA_SCALE, _SPRB_SCALE)
+#define SPRGAMC(pipe) _PIPE(pipe, _SPRA_GAMC, _SPRB_GAMC)
+
+/* VBIOS regs */
+#define VGACNTRL		0x71400
+# define VGA_DISP_DISABLE			(1 << 31)
+# define VGA_2X_MODE				(1 << 30)
+# define VGA_PIPE_B_SELECT			(1 << 29)
+
+/* Ironlake */
+
+#define CPU_VGACNTRL	0x41000
+
+#define DIGITAL_PORT_HOTPLUG_CNTRL      0x44030
+#define  DIGITAL_PORTA_HOTPLUG_ENABLE           (1 << 4)
+#define  DIGITAL_PORTA_SHORT_PULSE_2MS          (0 << 2)
+#define  DIGITAL_PORTA_SHORT_PULSE_4_5MS        (1 << 2)
+#define  DIGITAL_PORTA_SHORT_PULSE_6MS          (2 << 2)
+#define  DIGITAL_PORTA_SHORT_PULSE_100MS        (3 << 2)
+#define  DIGITAL_PORTA_NO_DETECT                (0 << 0)
+#define  DIGITAL_PORTA_LONG_PULSE_DETECT_MASK   (1 << 1)
+#define  DIGITAL_PORTA_SHORT_PULSE_DETECT_MASK  (1 << 0)
+
+/* refresh rate hardware control */
+#define RR_HW_CTL       0x45300
+#define  RR_HW_LOW_POWER_FRAMES_MASK    0xff
+#define  RR_HW_HIGH_POWER_FRAMES_MASK   0xff00
+
+#define FDI_PLL_BIOS_0  0x46000
+#define  FDI_PLL_FB_CLOCK_MASK  0xff
+#define FDI_PLL_BIOS_1  0x46004
+#define FDI_PLL_BIOS_2  0x46008
+#define DISPLAY_PORT_PLL_BIOS_0         0x4600c
+#define DISPLAY_PORT_PLL_BIOS_1         0x46010
+#define DISPLAY_PORT_PLL_BIOS_2         0x46014
+
+#define PCH_DSPCLK_GATE_D	0x42020
+# define DPFCUNIT_CLOCK_GATE_DISABLE		(1 << 9)
+# define DPFCRUNIT_CLOCK_GATE_DISABLE		(1 << 8)
+# define DPFDUNIT_CLOCK_GATE_DISABLE		(1 << 7)
+# define DPARBUNIT_CLOCK_GATE_DISABLE		(1 << 5)
+
+#define PCH_3DCGDIS0		0x46020
+# define MARIUNIT_CLOCK_GATE_DISABLE		(1 << 18)
+# define SVSMUNIT_CLOCK_GATE_DISABLE		(1 << 1)
+
+#define PCH_3DCGDIS1		0x46024
+# define VFMUNIT_CLOCK_GATE_DISABLE		(1 << 11)
+
+#define FDI_PLL_FREQ_CTL        0x46030
+#define  FDI_PLL_FREQ_CHANGE_REQUEST    (1<<24)
+#define  FDI_PLL_FREQ_LOCK_LIMIT_MASK   0xfff00
+#define  FDI_PLL_FREQ_DISABLE_COUNT_LIMIT_MASK  0xff
+
+
+#define _PIPEA_DATA_M1           0x60030
+#define  TU_SIZE(x)             (((x)-1) << 25) /* default size 64 */
+#define  TU_SIZE_MASK           0x7e000000
+#define  PIPE_DATA_M1_OFFSET    0
+#define _PIPEA_DATA_N1           0x60034
+#define  PIPE_DATA_N1_OFFSET    0
+
+#define _PIPEA_DATA_M2           0x60038
+#define  PIPE_DATA_M2_OFFSET    0
+#define _PIPEA_DATA_N2           0x6003c
+#define  PIPE_DATA_N2_OFFSET    0
+
+#define _PIPEA_LINK_M1           0x60040
+#define  PIPE_LINK_M1_OFFSET    0
+#define _PIPEA_LINK_N1           0x60044
+#define  PIPE_LINK_N1_OFFSET    0
+
+#define _PIPEA_LINK_M2           0x60048
+#define  PIPE_LINK_M2_OFFSET    0
+#define _PIPEA_LINK_N2           0x6004c
+#define  PIPE_LINK_N2_OFFSET    0
+
+/* PIPEB timing regs are same start from 0x61000 */
+
+#define _PIPEB_DATA_M1           0x61030
+#define _PIPEB_DATA_N1           0x61034
+
+#define _PIPEB_DATA_M2           0x61038
+#define _PIPEB_DATA_N2           0x6103c
+
+#define _PIPEB_LINK_M1           0x61040
+#define _PIPEB_LINK_N1           0x61044
+
+#define _PIPEB_LINK_M2           0x61048
+#define _PIPEB_LINK_N2           0x6104c
+
+#define PIPE_DATA_M1(pipe) _PIPE(pipe, _PIPEA_DATA_M1, _PIPEB_DATA_M1)
+#define PIPE_DATA_N1(pipe) _PIPE(pipe, _PIPEA_DATA_N1, _PIPEB_DATA_N1)
+#define PIPE_DATA_M2(pipe) _PIPE(pipe, _PIPEA_DATA_M2, _PIPEB_DATA_M2)
+#define PIPE_DATA_N2(pipe) _PIPE(pipe, _PIPEA_DATA_N2, _PIPEB_DATA_N2)
+#define PIPE_LINK_M1(pipe) _PIPE(pipe, _PIPEA_LINK_M1, _PIPEB_LINK_M1)
+#define PIPE_LINK_N1(pipe) _PIPE(pipe, _PIPEA_LINK_N1, _PIPEB_LINK_N1)
+#define PIPE_LINK_M2(pipe) _PIPE(pipe, _PIPEA_LINK_M2, _PIPEB_LINK_M2)
+#define PIPE_LINK_N2(pipe) _PIPE(pipe, _PIPEA_LINK_N2, _PIPEB_LINK_N2)
+
+/* CPU panel fitter */
+/* IVB+ has 3 fitters, 0 is 7x5 capable, the other two only 3x3 */
+#define _PFA_CTL_1               0x68080
+#define _PFB_CTL_1               0x68880
+#define  PF_ENABLE              (1<<31)
+#define  PF_FILTER_MASK		(3<<23)
+#define  PF_FILTER_PROGRAMMED	(0<<23)
+#define  PF_FILTER_MED_3x3	(1<<23)
+#define  PF_FILTER_EDGE_ENHANCE	(2<<23)
+#define  PF_FILTER_EDGE_SOFTEN	(3<<23)
+#define _PFA_WIN_SZ		0x68074
+#define _PFB_WIN_SZ		0x68874
+#define _PFA_WIN_POS		0x68070
+#define _PFB_WIN_POS		0x68870
+#define _PFA_VSCALE		0x68084
+#define _PFB_VSCALE		0x68884
+#define _PFA_HSCALE		0x68090
+#define _PFB_HSCALE		0x68890
+
+#define PF_CTL(pipe)		_PIPE(pipe, _PFA_CTL_1, _PFB_CTL_1)
+#define PF_WIN_SZ(pipe)		_PIPE(pipe, _PFA_WIN_SZ, _PFB_WIN_SZ)
+#define PF_WIN_POS(pipe)	_PIPE(pipe, _PFA_WIN_POS, _PFB_WIN_POS)
+#define PF_VSCALE(pipe)		_PIPE(pipe, _PFA_VSCALE, _PFB_VSCALE)
+#define PF_HSCALE(pipe)		_PIPE(pipe, _PFA_HSCALE, _PFB_HSCALE)
+
+/* legacy palette */
+#define _LGC_PALETTE_A           0x4a000
+#define _LGC_PALETTE_B           0x4a800
+#define LGC_PALETTE(pipe) _PIPE(pipe, _LGC_PALETTE_A, _LGC_PALETTE_B)
+
+/* interrupts */
+#define DE_MASTER_IRQ_CONTROL   (1 << 31)
+#define DE_SPRITEB_FLIP_DONE    (1 << 29)
+#define DE_SPRITEA_FLIP_DONE    (1 << 28)
+#define DE_PLANEB_FLIP_DONE     (1 << 27)
+#define DE_PLANEA_FLIP_DONE     (1 << 26)
+#define DE_PCU_EVENT            (1 << 25)
+#define DE_GTT_FAULT            (1 << 24)
+#define DE_POISON               (1 << 23)
+#define DE_PERFORM_COUNTER      (1 << 22)
+#define DE_PCH_EVENT            (1 << 21)
+#define DE_AUX_CHANNEL_A        (1 << 20)
+#define DE_DP_A_HOTPLUG         (1 << 19)
+#define DE_GSE                  (1 << 18)
+#define DE_PIPEB_VBLANK         (1 << 15)
+#define DE_PIPEB_EVEN_FIELD     (1 << 14)
+#define DE_PIPEB_ODD_FIELD      (1 << 13)
+#define DE_PIPEB_LINE_COMPARE   (1 << 12)
+#define DE_PIPEB_VSYNC          (1 << 11)
+#define DE_PIPEB_FIFO_UNDERRUN  (1 << 8)
+#define DE_PIPEA_VBLANK         (1 << 7)
+#define DE_PIPEA_EVEN_FIELD     (1 << 6)
+#define DE_PIPEA_ODD_FIELD      (1 << 5)
+#define DE_PIPEA_LINE_COMPARE   (1 << 4)
+#define DE_PIPEA_VSYNC          (1 << 3)
+#define DE_PIPEA_FIFO_UNDERRUN  (1 << 0)
+
+/* More Ivybridge lolz */
+#define DE_ERR_DEBUG_IVB		(1<<30)
+#define DE_GSE_IVB			(1<<29)
+#define DE_PCH_EVENT_IVB		(1<<28)
+#define DE_DP_A_HOTPLUG_IVB		(1<<27)
+#define DE_AUX_CHANNEL_A_IVB		(1<<26)
+#define DE_SPRITEB_FLIP_DONE_IVB	(1<<9)
+#define DE_SPRITEA_FLIP_DONE_IVB	(1<<4)
+#define DE_PLANEB_FLIP_DONE_IVB		(1<<8)
+#define DE_PLANEA_FLIP_DONE_IVB		(1<<3)
+#define DE_PIPEB_VBLANK_IVB		(1<<5)
+#define DE_PIPEA_VBLANK_IVB		(1<<0)
+
+#define DEISR   0x44000
+#define DEIMR   0x44004
+#define DEIIR   0x44008
+#define DEIER   0x4400c
+
+/* GT interrupt */
+#define GT_PIPE_NOTIFY		(1 << 4)
+#define GT_SYNC_STATUS          (1 << 2)
+#define GT_USER_INTERRUPT       (1 << 0)
+#define GT_BSD_USER_INTERRUPT   (1 << 5)
+#define GT_GEN6_BSD_USER_INTERRUPT	(1 << 12)
+#define GT_BLT_USER_INTERRUPT	(1 << 22)
+
+#define GTISR   0x44010
+#define GTIMR   0x44014
+#define GTIIR   0x44018
+#define GTIER   0x4401c
+
+#define ILK_DISPLAY_CHICKEN2	0x42004
+/* Required on all Ironlake and Sandybridge according to the B-Spec. */
+#define  ILK_ELPIN_409_SELECT	(1 << 25)
+#define  ILK_DPARB_GATE	(1<<22)
+#define  ILK_VSDPFD_FULL	(1<<21)
+#define ILK_DISPLAY_CHICKEN_FUSES	0x42014
+#define  ILK_INTERNAL_GRAPHICS_DISABLE	(1<<31)
+#define  ILK_INTERNAL_DISPLAY_DISABLE	(1<<30)
+#define  ILK_DISPLAY_DEBUG_DISABLE	(1<<29)
+#define  ILK_HDCP_DISABLE		(1<<25)
+#define  ILK_eDP_A_DISABLE		(1<<24)
+#define  ILK_DESKTOP			(1<<23)
+#define ILK_DSPCLK_GATE		0x42020
+#define  IVB_VRHUNIT_CLK_GATE	(1<<28)
+#define  ILK_DPARB_CLK_GATE	(1<<5)
+#define  ILK_DPFD_CLK_GATE	(1<<7)
+
+/* According to spec this bit 7/8/9 of 0x42020 should be set to enable FBC */
+#define   ILK_CLK_FBC		(1<<7)
+#define   ILK_DPFC_DIS1		(1<<8)
+#define   ILK_DPFC_DIS2		(1<<9)
+
+#define IVB_CHICKEN3	0x4200c
+# define CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE	(1 << 5)
+# define CHICKEN3_DGMG_DONE_FIX_DISABLE		(1 << 2)
+
+#define DISP_ARB_CTL	0x45000
+#define  DISP_TILE_SURFACE_SWIZZLING	(1<<13)
+#define  DISP_FBC_WM_DIS		(1<<15)
+
+/* GEN7 chicken */
+#define GEN7_COMMON_SLICE_CHICKEN1		0x7010
+# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC	((1<<10) | (1<<26))
+
+#define GEN7_L3CNTLREG1				0xB01C
+#define  GEN7_WA_FOR_GEN7_L3_CONTROL			0x3C4FFF8C
+
+#define GEN7_L3_CHICKEN_MODE_REGISTER		0xB030
+#define  GEN7_WA_L3_CHICKEN_MODE				0x20000000
+
+/* WaCatErrorRejectionIssue */
+#define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG		0x9030
+#define  GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB	(1<<11)
+
+/* PCH */
+
+/* south display engine interrupt */
+#define SDE_AUDIO_POWER_D	(1 << 27)
+#define SDE_AUDIO_POWER_C	(1 << 26)
+#define SDE_AUDIO_POWER_B	(1 << 25)
+#define SDE_AUDIO_POWER_SHIFT	(25)
+#define SDE_AUDIO_POWER_MASK	(7 << SDE_AUDIO_POWER_SHIFT)
+#define SDE_GMBUS		(1 << 24)
+#define SDE_AUDIO_HDCP_TRANSB	(1 << 23)
+#define SDE_AUDIO_HDCP_TRANSA	(1 << 22)
+#define SDE_AUDIO_HDCP_MASK	(3 << 22)
+#define SDE_AUDIO_TRANSB	(1 << 21)
+#define SDE_AUDIO_TRANSA	(1 << 20)
+#define SDE_AUDIO_TRANS_MASK	(3 << 20)
+#define SDE_POISON		(1 << 19)
+/* 18 reserved */
+#define SDE_FDI_RXB		(1 << 17)
+#define SDE_FDI_RXA		(1 << 16)
+#define SDE_FDI_MASK		(3 << 16)
+#define SDE_AUXD		(1 << 15)
+#define SDE_AUXC		(1 << 14)
+#define SDE_AUXB		(1 << 13)
+#define SDE_AUX_MASK		(7 << 13)
+/* 12 reserved */
+#define SDE_CRT_HOTPLUG         (1 << 11)
+#define SDE_PORTD_HOTPLUG       (1 << 10)
+#define SDE_PORTC_HOTPLUG       (1 << 9)
+#define SDE_PORTB_HOTPLUG       (1 << 8)
+#define SDE_SDVOB_HOTPLUG       (1 << 6)
+#define SDE_HOTPLUG_MASK	(0xf << 8)
+#define SDE_TRANSB_CRC_DONE	(1 << 5)
+#define SDE_TRANSB_CRC_ERR	(1 << 4)
+#define SDE_TRANSB_FIFO_UNDER	(1 << 3)
+#define SDE_TRANSA_CRC_DONE	(1 << 2)
+#define SDE_TRANSA_CRC_ERR	(1 << 1)
+#define SDE_TRANSA_FIFO_UNDER	(1 << 0)
+#define SDE_TRANS_MASK		(0x3f)
+/* CPT */
+#define SDE_CRT_HOTPLUG_CPT	(1 << 19)
+#define SDE_PORTD_HOTPLUG_CPT	(1 << 23)
+#define SDE_PORTC_HOTPLUG_CPT	(1 << 22)
+#define SDE_PORTB_HOTPLUG_CPT	(1 << 21)
+#define SDE_HOTPLUG_MASK_CPT	(SDE_CRT_HOTPLUG_CPT |		\
+				 SDE_PORTD_HOTPLUG_CPT |	\
+				 SDE_PORTC_HOTPLUG_CPT |	\
+				 SDE_PORTB_HOTPLUG_CPT)
+
+#define SDEISR  0xc4000
+#define SDEIMR  0xc4004
+#define SDEIIR  0xc4008
+#define SDEIER  0xc400c
+
+/* digital port hotplug */
+#define PCH_PORT_HOTPLUG        0xc4030		/* SHOTPLUG_CTL */
+#define PORTD_HOTPLUG_ENABLE            (1 << 20)
+#define PORTD_PULSE_DURATION_2ms        (0)
+#define PORTD_PULSE_DURATION_4_5ms      (1 << 18)
+#define PORTD_PULSE_DURATION_6ms        (2 << 18)
+#define PORTD_PULSE_DURATION_100ms      (3 << 18)
+#define PORTD_PULSE_DURATION_MASK	(3 << 18)
+#define PORTD_HOTPLUG_NO_DETECT         (0)
+#define PORTD_HOTPLUG_SHORT_DETECT      (1 << 16)
+#define PORTD_HOTPLUG_LONG_DETECT       (1 << 17)
+#define PORTC_HOTPLUG_ENABLE            (1 << 12)
+#define PORTC_PULSE_DURATION_2ms        (0)
+#define PORTC_PULSE_DURATION_4_5ms      (1 << 10)
+#define PORTC_PULSE_DURATION_6ms        (2 << 10)
+#define PORTC_PULSE_DURATION_100ms      (3 << 10)
+#define PORTC_PULSE_DURATION_MASK	(3 << 10)
+#define PORTC_HOTPLUG_NO_DETECT         (0)
+#define PORTC_HOTPLUG_SHORT_DETECT      (1 << 8)
+#define PORTC_HOTPLUG_LONG_DETECT       (1 << 9)
+#define PORTB_HOTPLUG_ENABLE            (1 << 4)
+#define PORTB_PULSE_DURATION_2ms        (0)
+#define PORTB_PULSE_DURATION_4_5ms      (1 << 2)
+#define PORTB_PULSE_DURATION_6ms        (2 << 2)
+#define PORTB_PULSE_DURATION_100ms      (3 << 2)
+#define PORTB_PULSE_DURATION_MASK	(3 << 2)
+#define PORTB_HOTPLUG_NO_DETECT         (0)
+#define PORTB_HOTPLUG_SHORT_DETECT      (1 << 0)
+#define PORTB_HOTPLUG_LONG_DETECT       (1 << 1)
+
+#define PCH_GPIOA               0xc5010
+#define PCH_GPIOB               0xc5014
+#define PCH_GPIOC               0xc5018
+#define PCH_GPIOD               0xc501c
+#define PCH_GPIOE               0xc5020
+#define PCH_GPIOF               0xc5024
+
+#define PCH_GMBUS0		0xc5100
+#define PCH_GMBUS1		0xc5104
+#define PCH_GMBUS2		0xc5108
+#define PCH_GMBUS3		0xc510c
+#define PCH_GMBUS4		0xc5110
+#define PCH_GMBUS5		0xc5120
+
+#define _PCH_DPLL_A              0xc6014
+#define _PCH_DPLL_B              0xc6018
+#define PCH_DPLL(pipe) (pipe == 0 ?  _PCH_DPLL_A : _PCH_DPLL_B)
+
+#define _PCH_FPA0                0xc6040
+#define  FP_CB_TUNE		(0x3<<22)
+#define _PCH_FPA1                0xc6044
+#define _PCH_FPB0                0xc6048
+#define _PCH_FPB1                0xc604c
+#define PCH_FP0(pipe) (pipe == 0 ? _PCH_FPA0 : _PCH_FPB0)
+#define PCH_FP1(pipe) (pipe == 0 ? _PCH_FPA1 : _PCH_FPB1)
+
+#define PCH_DPLL_TEST           0xc606c
+
+#define PCH_DREF_CONTROL        0xC6200
+#define  DREF_CONTROL_MASK      0x7fc3
+#define  DREF_CPU_SOURCE_OUTPUT_DISABLE         (0<<13)
+#define  DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD      (2<<13)
+#define  DREF_CPU_SOURCE_OUTPUT_NONSPREAD       (3<<13)
+#define  DREF_CPU_SOURCE_OUTPUT_MASK		(3<<13)
+#define  DREF_SSC_SOURCE_DISABLE                (0<<11)
+#define  DREF_SSC_SOURCE_ENABLE                 (2<<11)
+#define  DREF_SSC_SOURCE_MASK			(3<<11)
+#define  DREF_NONSPREAD_SOURCE_DISABLE          (0<<9)
+#define  DREF_NONSPREAD_CK505_ENABLE		(1<<9)
+#define  DREF_NONSPREAD_SOURCE_ENABLE           (2<<9)
+#define  DREF_NONSPREAD_SOURCE_MASK		(3<<9)
+#define  DREF_SUPERSPREAD_SOURCE_DISABLE        (0<<7)
+#define  DREF_SUPERSPREAD_SOURCE_ENABLE         (2<<7)
+#define  DREF_SUPERSPREAD_SOURCE_MASK		(3<<7)
+#define  DREF_SSC4_DOWNSPREAD                   (0<<6)
+#define  DREF_SSC4_CENTERSPREAD                 (1<<6)
+#define  DREF_SSC1_DISABLE                      (0<<1)
+#define  DREF_SSC1_ENABLE                       (1<<1)
+#define  DREF_SSC4_DISABLE                      (0)
+#define  DREF_SSC4_ENABLE                       (1)
+
+#define PCH_RAWCLK_FREQ         0xc6204
+#define  FDL_TP1_TIMER_SHIFT    12
+#define  FDL_TP1_TIMER_MASK     (3<<12)
+#define  FDL_TP2_TIMER_SHIFT    10
+#define  FDL_TP2_TIMER_MASK     (3<<10)
+#define  RAWCLK_FREQ_MASK       0x3ff
+
+#define PCH_DPLL_TMR_CFG        0xc6208
+
+#define PCH_SSC4_PARMS          0xc6210
+#define PCH_SSC4_AUX_PARMS      0xc6214
+
+#define PCH_DPLL_SEL		0xc7000
+#define  TRANSA_DPLL_ENABLE	(1<<3)
+#define	 TRANSA_DPLLB_SEL	(1<<0)
+#define	 TRANSA_DPLLA_SEL	0
+#define  TRANSB_DPLL_ENABLE	(1<<7)
+#define	 TRANSB_DPLLB_SEL	(1<<4)
+#define	 TRANSB_DPLLA_SEL	(0)
+#define  TRANSC_DPLL_ENABLE	(1<<11)
+#define	 TRANSC_DPLLB_SEL	(1<<8)
+#define	 TRANSC_DPLLA_SEL	(0)
+
+/* transcoder */
+
+#define _TRANS_HTOTAL_A          0xe0000
+#define  TRANS_HTOTAL_SHIFT     16
+#define  TRANS_HACTIVE_SHIFT    0
+#define _TRANS_HBLANK_A          0xe0004
+#define  TRANS_HBLANK_END_SHIFT 16
+#define  TRANS_HBLANK_START_SHIFT 0
+#define _TRANS_HSYNC_A           0xe0008
+#define  TRANS_HSYNC_END_SHIFT  16
+#define  TRANS_HSYNC_START_SHIFT 0
+#define _TRANS_VTOTAL_A          0xe000c
+#define  TRANS_VTOTAL_SHIFT     16
+#define  TRANS_VACTIVE_SHIFT    0
+#define _TRANS_VBLANK_A          0xe0010
+#define  TRANS_VBLANK_END_SHIFT 16
+#define  TRANS_VBLANK_START_SHIFT 0
+#define _TRANS_VSYNC_A           0xe0014
+#define  TRANS_VSYNC_END_SHIFT  16
+#define  TRANS_VSYNC_START_SHIFT 0
+#define _TRANS_VSYNCSHIFT_A	0xe0028
+
+#define _TRANSA_DATA_M1          0xe0030
+#define _TRANSA_DATA_N1          0xe0034
+#define _TRANSA_DATA_M2          0xe0038
+#define _TRANSA_DATA_N2          0xe003c
+#define _TRANSA_DP_LINK_M1       0xe0040
+#define _TRANSA_DP_LINK_N1       0xe0044
+#define _TRANSA_DP_LINK_M2       0xe0048
+#define _TRANSA_DP_LINK_N2       0xe004c
+
+/* Per-transcoder DIP controls */
+
+#define _VIDEO_DIP_CTL_A         0xe0200
+#define _VIDEO_DIP_DATA_A        0xe0208
+#define _VIDEO_DIP_GCP_A         0xe0210
+
+#define _VIDEO_DIP_CTL_B         0xe1200
+#define _VIDEO_DIP_DATA_B        0xe1208
+#define _VIDEO_DIP_GCP_B         0xe1210
+
+#define TVIDEO_DIP_CTL(pipe) _PIPE(pipe, _VIDEO_DIP_CTL_A, _VIDEO_DIP_CTL_B)
+#define TVIDEO_DIP_DATA(pipe) _PIPE(pipe, _VIDEO_DIP_DATA_A, _VIDEO_DIP_DATA_B)
+#define TVIDEO_DIP_GCP(pipe) _PIPE(pipe, _VIDEO_DIP_GCP_A, _VIDEO_DIP_GCP_B)
+
+#define _TRANS_HTOTAL_B          0xe1000
+#define _TRANS_HBLANK_B          0xe1004
+#define _TRANS_HSYNC_B           0xe1008
+#define _TRANS_VTOTAL_B          0xe100c
+#define _TRANS_VBLANK_B          0xe1010
+#define _TRANS_VSYNC_B           0xe1014
+#define _TRANS_VSYNCSHIFT_B	 0xe1028
+
+#define TRANS_HTOTAL(pipe) _PIPE(pipe, _TRANS_HTOTAL_A, _TRANS_HTOTAL_B)
+#define TRANS_HBLANK(pipe) _PIPE(pipe, _TRANS_HBLANK_A, _TRANS_HBLANK_B)
+#define TRANS_HSYNC(pipe) _PIPE(pipe, _TRANS_HSYNC_A, _TRANS_HSYNC_B)
+#define TRANS_VTOTAL(pipe) _PIPE(pipe, _TRANS_VTOTAL_A, _TRANS_VTOTAL_B)
+#define TRANS_VBLANK(pipe) _PIPE(pipe, _TRANS_VBLANK_A, _TRANS_VBLANK_B)
+#define TRANS_VSYNC(pipe) _PIPE(pipe, _TRANS_VSYNC_A, _TRANS_VSYNC_B)
+#define TRANS_VSYNCSHIFT(pipe) _PIPE(pipe, _TRANS_VSYNCSHIFT_A, \
+				     _TRANS_VSYNCSHIFT_B)
+
+#define _TRANSB_DATA_M1          0xe1030
+#define _TRANSB_DATA_N1          0xe1034
+#define _TRANSB_DATA_M2          0xe1038
+#define _TRANSB_DATA_N2          0xe103c
+#define _TRANSB_DP_LINK_M1       0xe1040
+#define _TRANSB_DP_LINK_N1       0xe1044
+#define _TRANSB_DP_LINK_M2       0xe1048
+#define _TRANSB_DP_LINK_N2       0xe104c
+
+#define TRANSDATA_M1(pipe) _PIPE(pipe, _TRANSA_DATA_M1, _TRANSB_DATA_M1)
+#define TRANSDATA_N1(pipe) _PIPE(pipe, _TRANSA_DATA_N1, _TRANSB_DATA_N1)
+#define TRANSDATA_M2(pipe) _PIPE(pipe, _TRANSA_DATA_M2, _TRANSB_DATA_M2)
+#define TRANSDATA_N2(pipe) _PIPE(pipe, _TRANSA_DATA_N2, _TRANSB_DATA_N2)
+#define TRANSDPLINK_M1(pipe) _PIPE(pipe, _TRANSA_DP_LINK_M1, _TRANSB_DP_LINK_M1)
+#define TRANSDPLINK_N1(pipe) _PIPE(pipe, _TRANSA_DP_LINK_N1, _TRANSB_DP_LINK_N1)
+#define TRANSDPLINK_M2(pipe) _PIPE(pipe, _TRANSA_DP_LINK_M2, _TRANSB_DP_LINK_M2)
+#define TRANSDPLINK_N2(pipe) _PIPE(pipe, _TRANSA_DP_LINK_N2, _TRANSB_DP_LINK_N2)
+
+#define _TRANSACONF              0xf0008
+#define _TRANSBCONF              0xf1008
+#define TRANSCONF(plane) _PIPE(plane, _TRANSACONF, _TRANSBCONF)
+#define  TRANS_DISABLE          (0<<31)
+#define  TRANS_ENABLE           (1<<31)
+#define  TRANS_STATE_MASK       (1<<30)
+#define  TRANS_STATE_DISABLE    (0<<30)
+#define  TRANS_STATE_ENABLE     (1<<30)
+#define  TRANS_FSYNC_DELAY_HB1  (0<<27)
+#define  TRANS_FSYNC_DELAY_HB2  (1<<27)
+#define  TRANS_FSYNC_DELAY_HB3  (2<<27)
+#define  TRANS_FSYNC_DELAY_HB4  (3<<27)
+#define  TRANS_DP_AUDIO_ONLY    (1<<26)
+#define  TRANS_DP_VIDEO_AUDIO   (0<<26)
+#define  TRANS_INTERLACE_MASK   (7<<21)
+#define  TRANS_PROGRESSIVE      (0<<21)
+#define  TRANS_INTERLACED       (3<<21)
+#define  TRANS_LEGACY_INTERLACED_ILK (2<<21)
+#define  TRANS_8BPC             (0<<5)
+#define  TRANS_10BPC            (1<<5)
+#define  TRANS_6BPC             (2<<5)
+#define  TRANS_12BPC            (3<<5)
+
+#define _TRANSA_CHICKEN2	 0xf0064
+#define _TRANSB_CHICKEN2	 0xf1064
+#define TRANS_CHICKEN2(pipe) _PIPE(pipe, _TRANSA_CHICKEN2, _TRANSB_CHICKEN2)
+#define   TRANS_AUTOTRAIN_GEN_STALL_DIS	(1<<31)
+
+#define SOUTH_CHICKEN1		0xc2000
+#define  FDIA_PHASE_SYNC_SHIFT_OVR	19
+#define  FDIA_PHASE_SYNC_SHIFT_EN	18
+#define FDI_PHASE_SYNC_OVR(pipe) (1<<(FDIA_PHASE_SYNC_SHIFT_OVR - ((pipe) * 2)))
+#define FDI_PHASE_SYNC_EN(pipe) (1<<(FDIA_PHASE_SYNC_SHIFT_EN - ((pipe) * 2)))
+#define SOUTH_CHICKEN2		0xc2004
+#define  DPLS_EDP_PPS_FIX_DIS	(1<<0)
+
+#define _FDI_RXA_CHICKEN         0xc200c
+#define _FDI_RXB_CHICKEN         0xc2010
+#define  FDI_RX_PHASE_SYNC_POINTER_OVR	(1<<1)
+#define  FDI_RX_PHASE_SYNC_POINTER_EN	(1<<0)
+#define FDI_RX_CHICKEN(pipe) _PIPE(pipe, _FDI_RXA_CHICKEN, _FDI_RXB_CHICKEN)
+
+#define SOUTH_DSPCLK_GATE_D	0xc2020
+#define  PCH_DPLSUNIT_CLOCK_GATE_DISABLE (1<<29)
+
+/* CPU: FDI_TX */
+#define _FDI_TXA_CTL             0x60100
+#define _FDI_TXB_CTL             0x61100
+#define FDI_TX_CTL(pipe) _PIPE(pipe, _FDI_TXA_CTL, _FDI_TXB_CTL)
+#define  FDI_TX_DISABLE         (0<<31)
+#define  FDI_TX_ENABLE          (1<<31)
+#define  FDI_LINK_TRAIN_PATTERN_1       (0<<28)
+#define  FDI_LINK_TRAIN_PATTERN_2       (1<<28)
+#define  FDI_LINK_TRAIN_PATTERN_IDLE    (2<<28)
+#define  FDI_LINK_TRAIN_NONE            (3<<28)
+#define  FDI_LINK_TRAIN_VOLTAGE_0_4V    (0<<25)
+#define  FDI_LINK_TRAIN_VOLTAGE_0_6V    (1<<25)
+#define  FDI_LINK_TRAIN_VOLTAGE_0_8V    (2<<25)
+#define  FDI_LINK_TRAIN_VOLTAGE_1_2V    (3<<25)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_NONE (0<<22)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_1_5X (1<<22)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_2X   (2<<22)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_3X   (3<<22)
+/* ILK always use 400mV 0dB for voltage swing and pre-emphasis level.
+   SNB has different settings. */
+/* SNB A-stepping */
+#define  FDI_LINK_TRAIN_400MV_0DB_SNB_A		(0x38<<22)
+#define  FDI_LINK_TRAIN_400MV_6DB_SNB_A		(0x02<<22)
+#define  FDI_LINK_TRAIN_600MV_3_5DB_SNB_A	(0x01<<22)
+#define  FDI_LINK_TRAIN_800MV_0DB_SNB_A		(0x0<<22)
+/* SNB B-stepping */
+#define  FDI_LINK_TRAIN_400MV_0DB_SNB_B		(0x0<<22)
+#define  FDI_LINK_TRAIN_400MV_6DB_SNB_B		(0x3a<<22)
+#define  FDI_LINK_TRAIN_600MV_3_5DB_SNB_B	(0x39<<22)
+#define  FDI_LINK_TRAIN_800MV_0DB_SNB_B		(0x38<<22)
+#define  FDI_LINK_TRAIN_VOL_EMP_MASK		(0x3f<<22)
+#define  FDI_DP_PORT_WIDTH_X1           (0<<19)
+#define  FDI_DP_PORT_WIDTH_X2           (1<<19)
+#define  FDI_DP_PORT_WIDTH_X3           (2<<19)
+#define  FDI_DP_PORT_WIDTH_X4           (3<<19)
+#define  FDI_TX_ENHANCE_FRAME_ENABLE    (1<<18)
+/* Ironlake: hardwired to 1 */
+#define  FDI_TX_PLL_ENABLE              (1<<14)
+
+/* Ivybridge has different bits for lolz */
+#define  FDI_LINK_TRAIN_PATTERN_1_IVB       (0<<8)
+#define  FDI_LINK_TRAIN_PATTERN_2_IVB       (1<<8)
+#define  FDI_LINK_TRAIN_PATTERN_IDLE_IVB    (2<<8)
+#define  FDI_LINK_TRAIN_NONE_IVB            (3<<8)
+
+/* both Tx and Rx */
+#define  FDI_COMPOSITE_SYNC		(1<<11)
+#define  FDI_LINK_TRAIN_AUTO		(1<<10)
+#define  FDI_SCRAMBLING_ENABLE          (0<<7)
+#define  FDI_SCRAMBLING_DISABLE         (1<<7)
+
+/* FDI_RX, FDI_X is hard-wired to Transcoder_X */
+#define _FDI_RXA_CTL             0xf000c
+#define _FDI_RXB_CTL             0xf100c
+#define FDI_RX_CTL(pipe) _PIPE(pipe, _FDI_RXA_CTL, _FDI_RXB_CTL)
+#define  FDI_RX_ENABLE          (1<<31)
+/* train, dp width same as FDI_TX */
+#define  FDI_FS_ERRC_ENABLE		(1<<27)
+#define  FDI_FE_ERRC_ENABLE		(1<<26)
+#define  FDI_DP_PORT_WIDTH_X8           (7<<19)
+#define  FDI_8BPC                       (0<<16)
+#define  FDI_10BPC                      (1<<16)
+#define  FDI_6BPC                       (2<<16)
+#define  FDI_12BPC                      (3<<16)
+#define  FDI_LINK_REVERSE_OVERWRITE     (1<<15)
+#define  FDI_DMI_LINK_REVERSE_MASK      (1<<14)
+#define  FDI_RX_PLL_ENABLE              (1<<13)
+#define  FDI_FS_ERR_CORRECT_ENABLE      (1<<11)
+#define  FDI_FE_ERR_CORRECT_ENABLE      (1<<10)
+#define  FDI_FS_ERR_REPORT_ENABLE       (1<<9)
+#define  FDI_FE_ERR_REPORT_ENABLE       (1<<8)
+#define  FDI_RX_ENHANCE_FRAME_ENABLE    (1<<6)
+#define  FDI_PCDCLK	                (1<<4)
+/* CPT */
+#define  FDI_AUTO_TRAINING			(1<<10)
+#define  FDI_LINK_TRAIN_PATTERN_1_CPT		(0<<8)
+#define  FDI_LINK_TRAIN_PATTERN_2_CPT		(1<<8)
+#define  FDI_LINK_TRAIN_PATTERN_IDLE_CPT	(2<<8)
+#define  FDI_LINK_TRAIN_NORMAL_CPT		(3<<8)
+#define  FDI_LINK_TRAIN_PATTERN_MASK_CPT	(3<<8)
+
+#define _FDI_RXA_MISC            0xf0010
+#define _FDI_RXB_MISC            0xf1010
+#define _FDI_RXA_TUSIZE1         0xf0030
+#define _FDI_RXA_TUSIZE2         0xf0038
+#define _FDI_RXB_TUSIZE1         0xf1030
+#define _FDI_RXB_TUSIZE2         0xf1038
+#define FDI_RX_MISC(pipe) _PIPE(pipe, _FDI_RXA_MISC, _FDI_RXB_MISC)
+#define FDI_RX_TUSIZE1(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE1, _FDI_RXB_TUSIZE1)
+#define FDI_RX_TUSIZE2(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE2, _FDI_RXB_TUSIZE2)
+
+/* FDI_RX interrupt register format */
+#define FDI_RX_INTER_LANE_ALIGN         (1<<10)
+#define FDI_RX_SYMBOL_LOCK              (1<<9) /* train 2 */
+#define FDI_RX_BIT_LOCK                 (1<<8) /* train 1 */
+#define FDI_RX_TRAIN_PATTERN_2_FAIL     (1<<7)
+#define FDI_RX_FS_CODE_ERR              (1<<6)
+#define FDI_RX_FE_CODE_ERR              (1<<5)
+#define FDI_RX_SYMBOL_ERR_RATE_ABOVE    (1<<4)
+#define FDI_RX_HDCP_LINK_FAIL           (1<<3)
+#define FDI_RX_PIXEL_FIFO_OVERFLOW      (1<<2)
+#define FDI_RX_CROSS_CLOCK_OVERFLOW     (1<<1)
+#define FDI_RX_SYMBOL_QUEUE_OVERFLOW    (1<<0)
+
+#define _FDI_RXA_IIR             0xf0014
+#define _FDI_RXA_IMR             0xf0018
+#define _FDI_RXB_IIR             0xf1014
+#define _FDI_RXB_IMR             0xf1018
+#define FDI_RX_IIR(pipe) _PIPE(pipe, _FDI_RXA_IIR, _FDI_RXB_IIR)
+#define FDI_RX_IMR(pipe) _PIPE(pipe, _FDI_RXA_IMR, _FDI_RXB_IMR)
+
+#define FDI_PLL_CTL_1           0xfe000
+#define FDI_PLL_CTL_2           0xfe004
+
+/* CRT */
+#define PCH_ADPA                0xe1100
+#define  ADPA_TRANS_SELECT_MASK (1<<30)
+#define  ADPA_TRANS_A_SELECT    0
+#define  ADPA_TRANS_B_SELECT    (1<<30)
+#define  ADPA_CRT_HOTPLUG_MASK  0x03ff0000 /* bit 25-16 */
+#define  ADPA_CRT_HOTPLUG_MONITOR_NONE  (0<<24)
+#define  ADPA_CRT_HOTPLUG_MONITOR_MASK  (3<<24)
+#define  ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24)
+#define  ADPA_CRT_HOTPLUG_MONITOR_MONO  (2<<24)
+#define  ADPA_CRT_HOTPLUG_ENABLE        (1<<23)
+#define  ADPA_CRT_HOTPLUG_PERIOD_64     (0<<22)
+#define  ADPA_CRT_HOTPLUG_PERIOD_128    (1<<22)
+#define  ADPA_CRT_HOTPLUG_WARMUP_5MS    (0<<21)
+#define  ADPA_CRT_HOTPLUG_WARMUP_10MS   (1<<21)
+#define  ADPA_CRT_HOTPLUG_SAMPLE_2S     (0<<20)
+#define  ADPA_CRT_HOTPLUG_SAMPLE_4S     (1<<20)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_40    (0<<18)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_50    (1<<18)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_60    (2<<18)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_70    (3<<18)
+#define  ADPA_CRT_HOTPLUG_VOLREF_325MV  (0<<17)
+#define  ADPA_CRT_HOTPLUG_VOLREF_475MV  (1<<17)
+#define  ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
+
+/* or SDVOB */
+#define HDMIB   0xe1140
+#define  PORT_ENABLE    (1 << 31)
+#define  TRANSCODER(pipe)       ((pipe) << 30)
+#define  TRANSCODER_CPT(pipe)   ((pipe) << 29)
+#define  TRANSCODER_MASK        (1 << 30)
+#define  TRANSCODER_MASK_CPT    (3 << 29)
+#define  COLOR_FORMAT_8bpc      (0)
+#define  COLOR_FORMAT_12bpc     (3 << 26)
+#define  SDVOB_HOTPLUG_ENABLE   (1 << 23)
+#define  SDVO_ENCODING          (0)
+#define  TMDS_ENCODING          (2 << 10)
+#define  NULL_PACKET_VSYNC_ENABLE       (1 << 9)
+/* CPT */
+#define  HDMI_MODE_SELECT	(1 << 9)
+#define  DVI_MODE_SELECT	(0)
+#define  SDVOB_BORDER_ENABLE    (1 << 7)
+#define  AUDIO_ENABLE           (1 << 6)
+#define  VSYNC_ACTIVE_HIGH      (1 << 4)
+#define  HSYNC_ACTIVE_HIGH      (1 << 3)
+#define  PORT_DETECTED          (1 << 2)
+
+/* PCH SDVOB multiplex with HDMIB */
+#define PCH_SDVOB	HDMIB
+
+#define HDMIC   0xe1150
+#define HDMID   0xe1160
+
+#define PCH_LVDS	0xe1180
+#define  LVDS_DETECTED	(1 << 1)
+
+#define BLC_PWM_CPU_CTL2	0x48250
+#define  PWM_ENABLE		(1 << 31)
+#define  PWM_PIPE_A		(0 << 29)
+#define  PWM_PIPE_B		(1 << 29)
+#define BLC_PWM_CPU_CTL		0x48254
+
+#define BLC_PWM_PCH_CTL1	0xc8250
+#define  PWM_PCH_ENABLE		(1 << 31)
+#define  PWM_POLARITY_ACTIVE_LOW	(1 << 29)
+#define  PWM_POLARITY_ACTIVE_HIGH	(0 << 29)
+#define  PWM_POLARITY_ACTIVE_LOW2	(1 << 28)
+#define  PWM_POLARITY_ACTIVE_HIGH2	(0 << 28)
+
+#define BLC_PWM_PCH_CTL2	0xc8254
+
+#define PCH_PP_STATUS		0xc7200
+#define PCH_PP_CONTROL		0xc7204
+#define  PANEL_UNLOCK_REGS	(0xabcd << 16)
+#define  PANEL_UNLOCK_MASK	(0xffff << 16)
+#define  EDP_FORCE_VDD		(1 << 3)
+#define  EDP_BLC_ENABLE		(1 << 2)
+#define  PANEL_POWER_RESET	(1 << 1)
+#define  PANEL_POWER_OFF	(0 << 0)
+#define  PANEL_POWER_ON		(1 << 0)
+#define PCH_PP_ON_DELAYS	0xc7208
+#define  PANEL_PORT_SELECT_MASK	(3 << 30)
+#define  PANEL_PORT_SELECT_LVDS	(0 << 30)
+#define  PANEL_PORT_SELECT_DPA	(1 << 30)
+#define  EDP_PANEL		(1 << 30)
+#define  PANEL_PORT_SELECT_DPC	(2 << 30)
+#define  PANEL_PORT_SELECT_DPD	(3 << 30)
+#define  PANEL_POWER_UP_DELAY_MASK	(0x1fff0000)
+#define  PANEL_POWER_UP_DELAY_SHIFT	16
+#define  PANEL_LIGHT_ON_DELAY_MASK	(0x1fff)
+#define  PANEL_LIGHT_ON_DELAY_SHIFT	0
+
+#define PCH_PP_OFF_DELAYS	0xc720c
+#define  PANEL_POWER_DOWN_DELAY_MASK	(0x1fff0000)
+#define  PANEL_POWER_DOWN_DELAY_SHIFT	16
+#define  PANEL_LIGHT_OFF_DELAY_MASK	(0x1fff)
+#define  PANEL_LIGHT_OFF_DELAY_SHIFT	0
+
+#define PCH_PP_DIVISOR		0xc7210
+#define  PP_REFERENCE_DIVIDER_MASK	(0xffffff00)
+#define  PP_REFERENCE_DIVIDER_SHIFT	8
+#define  PANEL_POWER_CYCLE_DELAY_MASK	(0x1f)
+#define  PANEL_POWER_CYCLE_DELAY_SHIFT	0
+
+#define PCH_DP_B		0xe4100
+#define PCH_DPB_AUX_CH_CTL	0xe4110
+#define PCH_DPB_AUX_CH_DATA1	0xe4114
+#define PCH_DPB_AUX_CH_DATA2	0xe4118
+#define PCH_DPB_AUX_CH_DATA3	0xe411c
+#define PCH_DPB_AUX_CH_DATA4	0xe4120
+#define PCH_DPB_AUX_CH_DATA5	0xe4124
+
+#define PCH_DP_C		0xe4200
+#define PCH_DPC_AUX_CH_CTL	0xe4210
+#define PCH_DPC_AUX_CH_DATA1	0xe4214
+#define PCH_DPC_AUX_CH_DATA2	0xe4218
+#define PCH_DPC_AUX_CH_DATA3	0xe421c
+#define PCH_DPC_AUX_CH_DATA4	0xe4220
+#define PCH_DPC_AUX_CH_DATA5	0xe4224
+
+#define PCH_DP_D		0xe4300
+#define PCH_DPD_AUX_CH_CTL	0xe4310
+#define PCH_DPD_AUX_CH_DATA1	0xe4314
+#define PCH_DPD_AUX_CH_DATA2	0xe4318
+#define PCH_DPD_AUX_CH_DATA3	0xe431c
+#define PCH_DPD_AUX_CH_DATA4	0xe4320
+#define PCH_DPD_AUX_CH_DATA5	0xe4324
+
+/* CPT */
+#define  PORT_TRANS_A_SEL_CPT	0
+#define  PORT_TRANS_B_SEL_CPT	(1<<29)
+#define  PORT_TRANS_C_SEL_CPT	(2<<29)
+#define  PORT_TRANS_SEL_MASK	(3<<29)
+#define  PORT_TRANS_SEL_CPT(pipe)	((pipe) << 29)
+
+#define TRANS_DP_CTL_A		0xe0300
+#define TRANS_DP_CTL_B		0xe1300
+#define TRANS_DP_CTL_C		0xe2300
+#define TRANS_DP_CTL(pipe)	(TRANS_DP_CTL_A + (pipe) * 0x01000)
+#define  TRANS_DP_OUTPUT_ENABLE	(1<<31)
+#define  TRANS_DP_PORT_SEL_B	(0<<29)
+#define  TRANS_DP_PORT_SEL_C	(1<<29)
+#define  TRANS_DP_PORT_SEL_D	(2<<29)
+#define  TRANS_DP_PORT_SEL_NONE	(3<<29)
+#define  TRANS_DP_PORT_SEL_MASK	(3<<29)
+#define  TRANS_DP_AUDIO_ONLY	(1<<26)
+#define  TRANS_DP_ENH_FRAMING	(1<<18)
+#define  TRANS_DP_8BPC		(0<<9)
+#define  TRANS_DP_10BPC		(1<<9)
+#define  TRANS_DP_6BPC		(2<<9)
+#define  TRANS_DP_12BPC		(3<<9)
+#define  TRANS_DP_BPC_MASK	(3<<9)
+#define  TRANS_DP_VSYNC_ACTIVE_HIGH	(1<<4)
+#define  TRANS_DP_VSYNC_ACTIVE_LOW	0
+#define  TRANS_DP_HSYNC_ACTIVE_HIGH	(1<<3)
+#define  TRANS_DP_HSYNC_ACTIVE_LOW	0
+#define  TRANS_DP_SYNC_MASK	(3<<3)
+
+/* SNB eDP training params */
+/* SNB A-stepping */
+#define  EDP_LINK_TRAIN_400MV_0DB_SNB_A		(0x38<<22)
+#define  EDP_LINK_TRAIN_400MV_6DB_SNB_A		(0x02<<22)
+#define  EDP_LINK_TRAIN_600MV_3_5DB_SNB_A	(0x01<<22)
+#define  EDP_LINK_TRAIN_800MV_0DB_SNB_A		(0x0<<22)
+/* SNB B-stepping */
+#define  EDP_LINK_TRAIN_400_600MV_0DB_SNB_B	(0x0<<22)
+#define  EDP_LINK_TRAIN_400MV_3_5DB_SNB_B	(0x1<<22)
+#define  EDP_LINK_TRAIN_400_600MV_6DB_SNB_B	(0x3a<<22)
+#define  EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B	(0x39<<22)
+#define  EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B	(0x38<<22)
+#define  EDP_LINK_TRAIN_VOL_EMP_MASK_SNB	(0x3f<<22)
+
+/* IVB */
+#define EDP_LINK_TRAIN_400MV_0DB_IVB		(0x24 <<22)
+#define EDP_LINK_TRAIN_400MV_3_5DB_IVB		(0x2a <<22)
+#define EDP_LINK_TRAIN_400MV_6DB_IVB		(0x2f <<22)
+#define EDP_LINK_TRAIN_600MV_0DB_IVB		(0x30 <<22)
+#define EDP_LINK_TRAIN_600MV_3_5DB_IVB		(0x36 <<22)
+#define EDP_LINK_TRAIN_800MV_0DB_IVB		(0x38 <<22)
+#define EDP_LINK_TRAIN_800MV_3_5DB_IVB		(0x33 <<22)
+
+/* legacy values */
+#define EDP_LINK_TRAIN_500MV_0DB_IVB		(0x00 <<22)
+#define EDP_LINK_TRAIN_1000MV_0DB_IVB		(0x20 <<22)
+#define EDP_LINK_TRAIN_500MV_3_5DB_IVB		(0x02 <<22)
+#define EDP_LINK_TRAIN_1000MV_3_5DB_IVB		(0x22 <<22)
+#define EDP_LINK_TRAIN_1000MV_6DB_IVB		(0x23 <<22)
+
+#define  EDP_LINK_TRAIN_VOL_EMP_MASK_IVB	(0x3f<<22)
+
+#define  FORCEWAKE				0xA18C
+#define  FORCEWAKE_ACK				0x130090
+#define  FORCEWAKE_MT				0xa188 /* multi-threaded */
+#define  FORCEWAKE_MT_ACK			0x130040
+#define  ECOBUS					0xa180
+#define    FORCEWAKE_MT_ENABLE			(1<<5)
+
+#define  GTFIFODBG				0x120000
+#define    GT_FIFO_CPU_ERROR_MASK		7
+#define    GT_FIFO_OVFERR			(1<<2)
+#define    GT_FIFO_IAWRERR			(1<<1)
+#define    GT_FIFO_IARDERR			(1<<0)
+
+#define  GT_FIFO_FREE_ENTRIES			0x120008
+#define    GT_FIFO_NUM_RESERVED_ENTRIES		20
+
+#define GEN6_UCGCTL1				0x9400
+# define GEN6_BLBUNIT_CLOCK_GATE_DISABLE		(1 << 5)
+
+#define GEN6_UCGCTL2				0x9404
+# define GEN6_RCZUNIT_CLOCK_GATE_DISABLE		(1 << 13)
+# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE		(1 << 12)
+# define GEN6_RCCUNIT_CLOCK_GATE_DISABLE		(1 << 11)
+
+#define GEN6_RPNSWREQ				0xA008
+#define   GEN6_TURBO_DISABLE			(1<<31)
+#define   GEN6_FREQUENCY(x)			((x)<<25)
+#define   GEN6_OFFSET(x)			((x)<<19)
+#define   GEN6_AGGRESSIVE_TURBO			(0<<15)
+#define GEN6_RC_VIDEO_FREQ			0xA00C
+#define GEN6_RC_CONTROL				0xA090
+#define   GEN6_RC_CTL_RC6pp_ENABLE		(1<<16)
+#define   GEN6_RC_CTL_RC6p_ENABLE		(1<<17)
+#define   GEN6_RC_CTL_RC6_ENABLE		(1<<18)
+#define   GEN6_RC_CTL_RC1e_ENABLE		(1<<20)
+#define   GEN6_RC_CTL_RC7_ENABLE		(1<<22)
+#define   GEN6_RC_CTL_EI_MODE(x)		((x)<<27)
+#define   GEN6_RC_CTL_HW_ENABLE			(1<<31)
+#define GEN6_RP_DOWN_TIMEOUT			0xA010
+#define GEN6_RP_INTERRUPT_LIMITS		0xA014
+#define GEN6_RPSTAT1				0xA01C
+#define   GEN6_CAGF_SHIFT			8
+#define   GEN6_CAGF_MASK			(0x7f << GEN6_CAGF_SHIFT)
+#define GEN6_RP_CONTROL				0xA024
+#define   GEN6_RP_MEDIA_TURBO			(1<<11)
+#define   GEN6_RP_MEDIA_MODE_MASK		(3<<9)
+#define   GEN6_RP_MEDIA_HW_TURBO_MODE		(3<<9)
+#define   GEN6_RP_MEDIA_HW_NORMAL_MODE		(2<<9)
+#define   GEN6_RP_MEDIA_HW_MODE			(1<<9)
+#define   GEN6_RP_MEDIA_SW_MODE			(0<<9)
+#define   GEN6_RP_MEDIA_IS_GFX			(1<<8)
+#define   GEN6_RP_ENABLE			(1<<7)
+#define   GEN6_RP_UP_IDLE_MIN			(0x1<<3)
+#define   GEN6_RP_UP_BUSY_AVG			(0x2<<3)
+#define   GEN6_RP_UP_BUSY_CONT			(0x4<<3)
+#define   GEN6_RP_DOWN_IDLE_CONT		(0x1<<0)
+#define GEN6_RP_UP_THRESHOLD			0xA02C
+#define GEN6_RP_DOWN_THRESHOLD			0xA030
+#define GEN6_RP_CUR_UP_EI			0xA050
+#define   GEN6_CURICONT_MASK			0xffffff
+#define GEN6_RP_CUR_UP				0xA054
+#define   GEN6_CURBSYTAVG_MASK			0xffffff
+#define GEN6_RP_PREV_UP				0xA058
+#define GEN6_RP_CUR_DOWN_EI			0xA05C
+#define   GEN6_CURIAVG_MASK			0xffffff
+#define GEN6_RP_CUR_DOWN			0xA060
+#define GEN6_RP_PREV_DOWN			0xA064
+#define GEN6_RP_UP_EI				0xA068
+#define GEN6_RP_DOWN_EI				0xA06C
+#define GEN6_RP_IDLE_HYSTERSIS			0xA070
+#define GEN6_RC_STATE				0xA094
+#define GEN6_RC1_WAKE_RATE_LIMIT		0xA098
+#define GEN6_RC6_WAKE_RATE_LIMIT		0xA09C
+#define GEN6_RC6pp_WAKE_RATE_LIMIT		0xA0A0
+#define GEN6_RC_EVALUATION_INTERVAL		0xA0A8
+#define GEN6_RC_IDLE_HYSTERSIS			0xA0AC
+#define GEN6_RC_SLEEP				0xA0B0
+#define GEN6_RC1e_THRESHOLD			0xA0B4
+#define GEN6_RC6_THRESHOLD			0xA0B8
+#define GEN6_RC6p_THRESHOLD			0xA0BC
+#define GEN6_RC6pp_THRESHOLD			0xA0C0
+#define GEN6_PMINTRMSK				0xA168
+
+#define GEN6_PMISR				0x44020
+#define GEN6_PMIMR				0x44024 /* rps_lock */
+#define GEN6_PMIIR				0x44028
+#define GEN6_PMIER				0x4402C
+#define  GEN6_PM_MBOX_EVENT			(1<<25)
+#define  GEN6_PM_THERMAL_EVENT			(1<<24)
+#define  GEN6_PM_RP_DOWN_TIMEOUT		(1<<6)
+#define  GEN6_PM_RP_UP_THRESHOLD		(1<<5)
+#define  GEN6_PM_RP_DOWN_THRESHOLD		(1<<4)
+#define  GEN6_PM_RP_UP_EI_EXPIRED		(1<<2)
+#define  GEN6_PM_RP_DOWN_EI_EXPIRED		(1<<1)
+#define  GEN6_PM_DEFERRED_EVENTS		(GEN6_PM_RP_UP_THRESHOLD | \
+						 GEN6_PM_RP_DOWN_THRESHOLD | \
+						 GEN6_PM_RP_DOWN_TIMEOUT)
+
+#define GEN6_PCODE_MAILBOX			0x138124
+#define   GEN6_PCODE_READY			(1<<31)
+#define   GEN6_READ_OC_PARAMS			0xc
+#define   GEN6_PCODE_WRITE_MIN_FREQ_TABLE	0x8
+#define   GEN6_PCODE_READ_MIN_FREQ_TABLE	0x9
+#define GEN6_PCODE_DATA				0x138128
+#define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
+
+#define GEN6_GT_CORE_STATUS		0x138060
+#define   GEN6_CORE_CPD_STATE_MASK	(7<<4)
+#define   GEN6_RCn_MASK			7
+#define   GEN6_RC0			0
+#define   GEN6_RC3			2
+#define   GEN6_RC6			3
+#define   GEN6_RC7			4
+
+#define G4X_AUD_VID_DID			0x62020
+#define INTEL_AUDIO_DEVCL		0x808629FB
+#define INTEL_AUDIO_DEVBLC		0x80862801
+#define INTEL_AUDIO_DEVCTG		0x80862802
+
+#define G4X_AUD_CNTL_ST			0x620B4
+#define G4X_ELDV_DEVCL_DEVBLC		(1 << 13)
+#define G4X_ELDV_DEVCTG			(1 << 14)
+#define G4X_ELD_ADDR			(0xf << 5)
+#define G4X_ELD_ACK			(1 << 4)
+#define G4X_HDMIW_HDMIEDID		0x6210C
+
+#define IBX_HDMIW_HDMIEDID_A		0xE2050
+#define IBX_AUD_CNTL_ST_A		0xE20B4
+#define IBX_ELD_BUFFER_SIZE		(0x1f << 10)
+#define IBX_ELD_ADDRESS			(0x1f << 5)
+#define IBX_ELD_ACK			(1 << 4)
+#define IBX_AUD_CNTL_ST2		0xE20C0
+#define IBX_ELD_VALIDB			(1 << 0)
+#define IBX_CP_READYB			(1 << 1)
+
+#define CPT_HDMIW_HDMIEDID_A		0xE5050
+#define CPT_AUD_CNTL_ST_A		0xE50B4
+#define CPT_AUD_CNTRL_ST2		0xE50C0
+
+/* These are the 4 32-bit write offset registers for each stream
+ * output buffer.  It determines the offset from the
+ * 3DSTATE_SO_BUFFERs that the next streamed vertex output goes to.
+ */
+#define GEN7_SO_WRITE_OFFSET(n)		(0x5280 + (n) * 4)
+
+#define IBX_AUD_CONFIG_A			0xe2000
+#define CPT_AUD_CONFIG_A			0xe5000
+#define   AUD_CONFIG_N_VALUE_INDEX		(1 << 29)
+#define   AUD_CONFIG_N_PROG_ENABLE		(1 << 28)
+#define   AUD_CONFIG_UPPER_N_SHIFT		20
+#define   AUD_CONFIG_UPPER_N_VALUE		(0xff << 20)
+#define   AUD_CONFIG_LOWER_N_SHIFT		4
+#define   AUD_CONFIG_LOWER_N_VALUE		(0xfff << 4)
+#define   AUD_CONFIG_PIXEL_CLOCK_HDMI_SHIFT	16
+#define   AUD_CONFIG_PIXEL_CLOCK_HDMI		(0xf << 16)
+#define   AUD_CONFIG_DISABLE_NCTS		(1 << 3)
+
+#endif /* _I915_REG_H_ */
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
new file mode 100644
index 00000000..0d13778a
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -0,0 +1,917 @@
+/*
+ *
+ * Copyright 2008 (c) Intel Corporation
+ *   Jesse Barnes <jbarnes@virtuousgeek.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+#include "intel_drv.h"
+#include "i915_reg.h"
+
+static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32	dpll_reg;
+
+	/* On IVB, 3rd pipe shares PLL with another one */
+	if (pipe > 1)
+		return false;
+
+	if (HAS_PCH_SPLIT(dev))
+		dpll_reg = PCH_DPLL(pipe);
+	else
+		dpll_reg = (pipe == PIPE_A) ? _DPLL_A : _DPLL_B;
+
+	return (I915_READ(dpll_reg) & DPLL_VCO_ENABLE);
+}
+
+static void i915_save_palette(struct drm_device *dev, enum pipe pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long reg = (pipe == PIPE_A ? _PALETTE_A : _PALETTE_B);
+	u32 *array;
+	int i;
+
+	if (!i915_pipe_enabled(dev, pipe))
+		return;
+
+	if (HAS_PCH_SPLIT(dev))
+		reg = (pipe == PIPE_A) ? _LGC_PALETTE_A : _LGC_PALETTE_B;
+
+	if (pipe == PIPE_A)
+		array = dev_priv->save_palette_a;
+	else
+		array = dev_priv->save_palette_b;
+
+	for (i = 0; i < 256; i++)
+		array[i] = I915_READ(reg + (i << 2));
+}
+
+static void i915_restore_palette(struct drm_device *dev, enum pipe pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long reg = (pipe == PIPE_A ? _PALETTE_A : _PALETTE_B);
+	u32 *array;
+	int i;
+
+	if (!i915_pipe_enabled(dev, pipe))
+		return;
+
+	if (HAS_PCH_SPLIT(dev))
+		reg = (pipe == PIPE_A) ? _LGC_PALETTE_A : _LGC_PALETTE_B;
+
+	if (pipe == PIPE_A)
+		array = dev_priv->save_palette_a;
+	else
+		array = dev_priv->save_palette_b;
+
+	for (i = 0; i < 256; i++)
+		I915_WRITE(reg + (i << 2), array[i]);
+}
+
+static u8 i915_read_indexed(struct drm_device *dev, u16 index_port, u16 data_port, u8 reg)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_WRITE8(index_port, reg);
+	return I915_READ8(data_port);
+}
+
+static u8 i915_read_ar(struct drm_device *dev, u16 st01, u8 reg, u16 palette_enable)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_READ8(st01);
+	I915_WRITE8(VGA_AR_INDEX, palette_enable | reg);
+	return I915_READ8(VGA_AR_DATA_READ);
+}
+
+static void i915_write_ar(struct drm_device *dev, u16 st01, u8 reg, u8 val, u16 palette_enable)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_READ8(st01);
+	I915_WRITE8(VGA_AR_INDEX, palette_enable | reg);
+	I915_WRITE8(VGA_AR_DATA_WRITE, val);
+}
+
+static void i915_write_indexed(struct drm_device *dev, u16 index_port, u16 data_port, u8 reg, u8 val)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_WRITE8(index_port, reg);
+	I915_WRITE8(data_port, val);
+}
+
+static void i915_save_vga(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+	u16 cr_index, cr_data, st01;
+
+	/* VGA color palette registers */
+	dev_priv->saveDACMASK = I915_READ8(VGA_DACMASK);
+
+	/* MSR bits */
+	dev_priv->saveMSR = I915_READ8(VGA_MSR_READ);
+	if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) {
+		cr_index = VGA_CR_INDEX_CGA;
+		cr_data = VGA_CR_DATA_CGA;
+		st01 = VGA_ST01_CGA;
+	} else {
+		cr_index = VGA_CR_INDEX_MDA;
+		cr_data = VGA_CR_DATA_MDA;
+		st01 = VGA_ST01_MDA;
+	}
+
+	/* CRT controller regs */
+	i915_write_indexed(dev, cr_index, cr_data, 0x11,
+			   i915_read_indexed(dev, cr_index, cr_data, 0x11) &
+			   (~0x80));
+	for (i = 0; i <= 0x24; i++)
+		dev_priv->saveCR[i] =
+			i915_read_indexed(dev, cr_index, cr_data, i);
+	/* Make sure we don't turn off CR group 0 writes */
+	dev_priv->saveCR[0x11] &= ~0x80;
+
+	/* Attribute controller registers */
+	I915_READ8(st01);
+	dev_priv->saveAR_INDEX = I915_READ8(VGA_AR_INDEX);
+	for (i = 0; i <= 0x14; i++)
+		dev_priv->saveAR[i] = i915_read_ar(dev, st01, i, 0);
+	I915_READ8(st01);
+	I915_WRITE8(VGA_AR_INDEX, dev_priv->saveAR_INDEX);
+	I915_READ8(st01);
+
+	/* Graphics controller registers */
+	for (i = 0; i < 9; i++)
+		dev_priv->saveGR[i] =
+			i915_read_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, i);
+
+	dev_priv->saveGR[0x10] =
+		i915_read_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, 0x10);
+	dev_priv->saveGR[0x11] =
+		i915_read_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, 0x11);
+	dev_priv->saveGR[0x18] =
+		i915_read_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, 0x18);
+
+	/* Sequencer registers */
+	for (i = 0; i < 8; i++)
+		dev_priv->saveSR[i] =
+			i915_read_indexed(dev, VGA_SR_INDEX, VGA_SR_DATA, i);
+}
+
+static void i915_restore_vga(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+	u16 cr_index, cr_data, st01;
+
+	/* MSR bits */
+	I915_WRITE8(VGA_MSR_WRITE, dev_priv->saveMSR);
+	if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) {
+		cr_index = VGA_CR_INDEX_CGA;
+		cr_data = VGA_CR_DATA_CGA;
+		st01 = VGA_ST01_CGA;
+	} else {
+		cr_index = VGA_CR_INDEX_MDA;
+		cr_data = VGA_CR_DATA_MDA;
+		st01 = VGA_ST01_MDA;
+	}
+
+	/* Sequencer registers, don't write SR07 */
+	for (i = 0; i < 7; i++)
+		i915_write_indexed(dev, VGA_SR_INDEX, VGA_SR_DATA, i,
+				   dev_priv->saveSR[i]);
+
+	/* CRT controller regs */
+	/* Enable CR group 0 writes */
+	i915_write_indexed(dev, cr_index, cr_data, 0x11, dev_priv->saveCR[0x11]);
+	for (i = 0; i <= 0x24; i++)
+		i915_write_indexed(dev, cr_index, cr_data, i, dev_priv->saveCR[i]);
+
+	/* Graphics controller regs */
+	for (i = 0; i < 9; i++)
+		i915_write_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, i,
+				   dev_priv->saveGR[i]);
+
+	i915_write_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, 0x10,
+			   dev_priv->saveGR[0x10]);
+	i915_write_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, 0x11,
+			   dev_priv->saveGR[0x11]);
+	i915_write_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, 0x18,
+			   dev_priv->saveGR[0x18]);
+
+	/* Attribute controller registers */
+	I915_READ8(st01); /* switch back to index mode */
+	for (i = 0; i <= 0x14; i++)
+		i915_write_ar(dev, st01, i, dev_priv->saveAR[i], 0);
+	I915_READ8(st01); /* switch back to index mode */
+	I915_WRITE8(VGA_AR_INDEX, dev_priv->saveAR_INDEX | 0x20);
+	I915_READ8(st01);
+
+	/* VGA color palette registers */
+	I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
+}
+
+static void i915_save_modeset_reg(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return;
+
+	/* Cursor state */
+	dev_priv->saveCURACNTR = I915_READ(_CURACNTR);
+	dev_priv->saveCURAPOS = I915_READ(_CURAPOS);
+	dev_priv->saveCURABASE = I915_READ(_CURABASE);
+	dev_priv->saveCURBCNTR = I915_READ(_CURBCNTR);
+	dev_priv->saveCURBPOS = I915_READ(_CURBPOS);
+	dev_priv->saveCURBBASE = I915_READ(_CURBBASE);
+	if (IS_GEN2(dev))
+		dev_priv->saveCURSIZE = I915_READ(CURSIZE);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->savePCH_DREF_CONTROL = I915_READ(PCH_DREF_CONTROL);
+		dev_priv->saveDISP_ARB_CTL = I915_READ(DISP_ARB_CTL);
+	}
+
+	/* Pipe & plane A info */
+	dev_priv->savePIPEACONF = I915_READ(_PIPEACONF);
+	dev_priv->savePIPEASRC = I915_READ(_PIPEASRC);
+	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->saveFPA0 = I915_READ(_PCH_FPA0);
+		dev_priv->saveFPA1 = I915_READ(_PCH_FPA1);
+		dev_priv->saveDPLL_A = I915_READ(_PCH_DPLL_A);
+	} else {
+		dev_priv->saveFPA0 = I915_READ(_FPA0);
+		dev_priv->saveFPA1 = I915_READ(_FPA1);
+		dev_priv->saveDPLL_A = I915_READ(_DPLL_A);
+	}
+	if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
+		dev_priv->saveDPLL_A_MD = I915_READ(_DPLL_A_MD);
+	dev_priv->saveHTOTAL_A = I915_READ(_HTOTAL_A);
+	dev_priv->saveHBLANK_A = I915_READ(_HBLANK_A);
+	dev_priv->saveHSYNC_A = I915_READ(_HSYNC_A);
+	dev_priv->saveVTOTAL_A = I915_READ(_VTOTAL_A);
+	dev_priv->saveVBLANK_A = I915_READ(_VBLANK_A);
+	dev_priv->saveVSYNC_A = I915_READ(_VSYNC_A);
+	if (!HAS_PCH_SPLIT(dev))
+		dev_priv->saveBCLRPAT_A = I915_READ(_BCLRPAT_A);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->savePIPEA_DATA_M1 = I915_READ(_PIPEA_DATA_M1);
+		dev_priv->savePIPEA_DATA_N1 = I915_READ(_PIPEA_DATA_N1);
+		dev_priv->savePIPEA_LINK_M1 = I915_READ(_PIPEA_LINK_M1);
+		dev_priv->savePIPEA_LINK_N1 = I915_READ(_PIPEA_LINK_N1);
+
+		dev_priv->saveFDI_TXA_CTL = I915_READ(_FDI_TXA_CTL);
+		dev_priv->saveFDI_RXA_CTL = I915_READ(_FDI_RXA_CTL);
+
+		dev_priv->savePFA_CTL_1 = I915_READ(_PFA_CTL_1);
+		dev_priv->savePFA_WIN_SZ = I915_READ(_PFA_WIN_SZ);
+		dev_priv->savePFA_WIN_POS = I915_READ(_PFA_WIN_POS);
+
+		dev_priv->saveTRANSACONF = I915_READ(_TRANSACONF);
+		dev_priv->saveTRANS_HTOTAL_A = I915_READ(_TRANS_HTOTAL_A);
+		dev_priv->saveTRANS_HBLANK_A = I915_READ(_TRANS_HBLANK_A);
+		dev_priv->saveTRANS_HSYNC_A = I915_READ(_TRANS_HSYNC_A);
+		dev_priv->saveTRANS_VTOTAL_A = I915_READ(_TRANS_VTOTAL_A);
+		dev_priv->saveTRANS_VBLANK_A = I915_READ(_TRANS_VBLANK_A);
+		dev_priv->saveTRANS_VSYNC_A = I915_READ(_TRANS_VSYNC_A);
+	}
+
+	dev_priv->saveDSPACNTR = I915_READ(_DSPACNTR);
+	dev_priv->saveDSPASTRIDE = I915_READ(_DSPASTRIDE);
+	dev_priv->saveDSPASIZE = I915_READ(_DSPASIZE);
+	dev_priv->saveDSPAPOS = I915_READ(_DSPAPOS);
+	dev_priv->saveDSPAADDR = I915_READ(_DSPAADDR);
+	if (INTEL_INFO(dev)->gen >= 4) {
+		dev_priv->saveDSPASURF = I915_READ(_DSPASURF);
+		dev_priv->saveDSPATILEOFF = I915_READ(_DSPATILEOFF);
+	}
+	i915_save_palette(dev, PIPE_A);
+	dev_priv->savePIPEASTAT = I915_READ(_PIPEASTAT);
+
+	/* Pipe & plane B info */
+	dev_priv->savePIPEBCONF = I915_READ(_PIPEBCONF);
+	dev_priv->savePIPEBSRC = I915_READ(_PIPEBSRC);
+	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->saveFPB0 = I915_READ(_PCH_FPB0);
+		dev_priv->saveFPB1 = I915_READ(_PCH_FPB1);
+		dev_priv->saveDPLL_B = I915_READ(_PCH_DPLL_B);
+	} else {
+		dev_priv->saveFPB0 = I915_READ(_FPB0);
+		dev_priv->saveFPB1 = I915_READ(_FPB1);
+		dev_priv->saveDPLL_B = I915_READ(_DPLL_B);
+	}
+	if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
+		dev_priv->saveDPLL_B_MD = I915_READ(_DPLL_B_MD);
+	dev_priv->saveHTOTAL_B = I915_READ(_HTOTAL_B);
+	dev_priv->saveHBLANK_B = I915_READ(_HBLANK_B);
+	dev_priv->saveHSYNC_B = I915_READ(_HSYNC_B);
+	dev_priv->saveVTOTAL_B = I915_READ(_VTOTAL_B);
+	dev_priv->saveVBLANK_B = I915_READ(_VBLANK_B);
+	dev_priv->saveVSYNC_B = I915_READ(_VSYNC_B);
+	if (!HAS_PCH_SPLIT(dev))
+		dev_priv->saveBCLRPAT_B = I915_READ(_BCLRPAT_B);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->savePIPEB_DATA_M1 = I915_READ(_PIPEB_DATA_M1);
+		dev_priv->savePIPEB_DATA_N1 = I915_READ(_PIPEB_DATA_N1);
+		dev_priv->savePIPEB_LINK_M1 = I915_READ(_PIPEB_LINK_M1);
+		dev_priv->savePIPEB_LINK_N1 = I915_READ(_PIPEB_LINK_N1);
+
+		dev_priv->saveFDI_TXB_CTL = I915_READ(_FDI_TXB_CTL);
+		dev_priv->saveFDI_RXB_CTL = I915_READ(_FDI_RXB_CTL);
+
+		dev_priv->savePFB_CTL_1 = I915_READ(_PFB_CTL_1);
+		dev_priv->savePFB_WIN_SZ = I915_READ(_PFB_WIN_SZ);
+		dev_priv->savePFB_WIN_POS = I915_READ(_PFB_WIN_POS);
+
+		dev_priv->saveTRANSBCONF = I915_READ(_TRANSBCONF);
+		dev_priv->saveTRANS_HTOTAL_B = I915_READ(_TRANS_HTOTAL_B);
+		dev_priv->saveTRANS_HBLANK_B = I915_READ(_TRANS_HBLANK_B);
+		dev_priv->saveTRANS_HSYNC_B = I915_READ(_TRANS_HSYNC_B);
+		dev_priv->saveTRANS_VTOTAL_B = I915_READ(_TRANS_VTOTAL_B);
+		dev_priv->saveTRANS_VBLANK_B = I915_READ(_TRANS_VBLANK_B);
+		dev_priv->saveTRANS_VSYNC_B = I915_READ(_TRANS_VSYNC_B);
+	}
+
+	dev_priv->saveDSPBCNTR = I915_READ(_DSPBCNTR);
+	dev_priv->saveDSPBSTRIDE = I915_READ(_DSPBSTRIDE);
+	dev_priv->saveDSPBSIZE = I915_READ(_DSPBSIZE);
+	dev_priv->saveDSPBPOS = I915_READ(_DSPBPOS);
+	dev_priv->saveDSPBADDR = I915_READ(_DSPBADDR);
+	if (INTEL_INFO(dev)->gen >= 4) {
+		dev_priv->saveDSPBSURF = I915_READ(_DSPBSURF);
+		dev_priv->saveDSPBTILEOFF = I915_READ(_DSPBTILEOFF);
+	}
+	i915_save_palette(dev, PIPE_B);
+	dev_priv->savePIPEBSTAT = I915_READ(_PIPEBSTAT);
+
+	/* Fences */
+	switch (INTEL_INFO(dev)->gen) {
+	case 7:
+	case 6:
+		for (i = 0; i < 16; i++)
+			dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8));
+		break;
+	case 5:
+	case 4:
+		for (i = 0; i < 16; i++)
+			dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
+		break;
+	case 3:
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+	case 2:
+		for (i = 0; i < 8; i++)
+			dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+		break;
+	}
+
+	return;
+}
+
+static void i915_restore_modeset_reg(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int dpll_a_reg, fpa0_reg, fpa1_reg;
+	int dpll_b_reg, fpb0_reg, fpb1_reg;
+	int i;
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return;
+
+	/* Fences */
+	switch (INTEL_INFO(dev)->gen) {
+	case 7:
+	case 6:
+		for (i = 0; i < 16; i++)
+			I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + (i * 8), dev_priv->saveFENCE[i]);
+		break;
+	case 5:
+	case 4:
+		for (i = 0; i < 16; i++)
+			I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
+		break;
+	case 3:
+	case 2:
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
+		for (i = 0; i < 8; i++)
+			I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+		break;
+	}
+
+
+	if (HAS_PCH_SPLIT(dev)) {
+		dpll_a_reg = _PCH_DPLL_A;
+		dpll_b_reg = _PCH_DPLL_B;
+		fpa0_reg = _PCH_FPA0;
+		fpb0_reg = _PCH_FPB0;
+		fpa1_reg = _PCH_FPA1;
+		fpb1_reg = _PCH_FPB1;
+	} else {
+		dpll_a_reg = _DPLL_A;
+		dpll_b_reg = _DPLL_B;
+		fpa0_reg = _FPA0;
+		fpb0_reg = _FPB0;
+		fpa1_reg = _FPA1;
+		fpb1_reg = _FPB1;
+	}
+
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(PCH_DREF_CONTROL, dev_priv->savePCH_DREF_CONTROL);
+		I915_WRITE(DISP_ARB_CTL, dev_priv->saveDISP_ARB_CTL);
+	}
+
+	/* Pipe & plane A info */
+	/* Prime the clock */
+	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
+		I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A &
+			   ~DPLL_VCO_ENABLE);
+		POSTING_READ(dpll_a_reg);
+		udelay(150);
+	}
+	I915_WRITE(fpa0_reg, dev_priv->saveFPA0);
+	I915_WRITE(fpa1_reg, dev_priv->saveFPA1);
+	/* Actually enable it */
+	I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A);
+	POSTING_READ(dpll_a_reg);
+	udelay(150);
+	if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(_DPLL_A_MD, dev_priv->saveDPLL_A_MD);
+		POSTING_READ(_DPLL_A_MD);
+	}
+	udelay(150);
+
+	/* Restore mode */
+	I915_WRITE(_HTOTAL_A, dev_priv->saveHTOTAL_A);
+	I915_WRITE(_HBLANK_A, dev_priv->saveHBLANK_A);
+	I915_WRITE(_HSYNC_A, dev_priv->saveHSYNC_A);
+	I915_WRITE(_VTOTAL_A, dev_priv->saveVTOTAL_A);
+	I915_WRITE(_VBLANK_A, dev_priv->saveVBLANK_A);
+	I915_WRITE(_VSYNC_A, dev_priv->saveVSYNC_A);
+	if (!HAS_PCH_SPLIT(dev))
+		I915_WRITE(_BCLRPAT_A, dev_priv->saveBCLRPAT_A);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(_PIPEA_DATA_M1, dev_priv->savePIPEA_DATA_M1);
+		I915_WRITE(_PIPEA_DATA_N1, dev_priv->savePIPEA_DATA_N1);
+		I915_WRITE(_PIPEA_LINK_M1, dev_priv->savePIPEA_LINK_M1);
+		I915_WRITE(_PIPEA_LINK_N1, dev_priv->savePIPEA_LINK_N1);
+
+		I915_WRITE(_FDI_RXA_CTL, dev_priv->saveFDI_RXA_CTL);
+		I915_WRITE(_FDI_TXA_CTL, dev_priv->saveFDI_TXA_CTL);
+
+		I915_WRITE(_PFA_CTL_1, dev_priv->savePFA_CTL_1);
+		I915_WRITE(_PFA_WIN_SZ, dev_priv->savePFA_WIN_SZ);
+		I915_WRITE(_PFA_WIN_POS, dev_priv->savePFA_WIN_POS);
+
+		I915_WRITE(_TRANSACONF, dev_priv->saveTRANSACONF);
+		I915_WRITE(_TRANS_HTOTAL_A, dev_priv->saveTRANS_HTOTAL_A);
+		I915_WRITE(_TRANS_HBLANK_A, dev_priv->saveTRANS_HBLANK_A);
+		I915_WRITE(_TRANS_HSYNC_A, dev_priv->saveTRANS_HSYNC_A);
+		I915_WRITE(_TRANS_VTOTAL_A, dev_priv->saveTRANS_VTOTAL_A);
+		I915_WRITE(_TRANS_VBLANK_A, dev_priv->saveTRANS_VBLANK_A);
+		I915_WRITE(_TRANS_VSYNC_A, dev_priv->saveTRANS_VSYNC_A);
+	}
+
+	/* Restore plane info */
+	I915_WRITE(_DSPASIZE, dev_priv->saveDSPASIZE);
+	I915_WRITE(_DSPAPOS, dev_priv->saveDSPAPOS);
+	I915_WRITE(_PIPEASRC, dev_priv->savePIPEASRC);
+	I915_WRITE(_DSPAADDR, dev_priv->saveDSPAADDR);
+	I915_WRITE(_DSPASTRIDE, dev_priv->saveDSPASTRIDE);
+	if (INTEL_INFO(dev)->gen >= 4) {
+		I915_WRITE(_DSPASURF, dev_priv->saveDSPASURF);
+		I915_WRITE(_DSPATILEOFF, dev_priv->saveDSPATILEOFF);
+	}
+
+	I915_WRITE(_PIPEACONF, dev_priv->savePIPEACONF);
+
+	i915_restore_palette(dev, PIPE_A);
+	/* Enable the plane */
+	I915_WRITE(_DSPACNTR, dev_priv->saveDSPACNTR);
+	I915_WRITE(_DSPAADDR, I915_READ(_DSPAADDR));
+
+	/* Pipe & plane B info */
+	if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) {
+		I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B &
+			   ~DPLL_VCO_ENABLE);
+		POSTING_READ(dpll_b_reg);
+		udelay(150);
+	}
+	I915_WRITE(fpb0_reg, dev_priv->saveFPB0);
+	I915_WRITE(fpb1_reg, dev_priv->saveFPB1);
+	/* Actually enable it */
+	I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B);
+	POSTING_READ(dpll_b_reg);
+	udelay(150);
+	if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(_DPLL_B_MD, dev_priv->saveDPLL_B_MD);
+		POSTING_READ(_DPLL_B_MD);
+	}
+	udelay(150);
+
+	/* Restore mode */
+	I915_WRITE(_HTOTAL_B, dev_priv->saveHTOTAL_B);
+	I915_WRITE(_HBLANK_B, dev_priv->saveHBLANK_B);
+	I915_WRITE(_HSYNC_B, dev_priv->saveHSYNC_B);
+	I915_WRITE(_VTOTAL_B, dev_priv->saveVTOTAL_B);
+	I915_WRITE(_VBLANK_B, dev_priv->saveVBLANK_B);
+	I915_WRITE(_VSYNC_B, dev_priv->saveVSYNC_B);
+	if (!HAS_PCH_SPLIT(dev))
+		I915_WRITE(_BCLRPAT_B, dev_priv->saveBCLRPAT_B);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(_PIPEB_DATA_M1, dev_priv->savePIPEB_DATA_M1);
+		I915_WRITE(_PIPEB_DATA_N1, dev_priv->savePIPEB_DATA_N1);
+		I915_WRITE(_PIPEB_LINK_M1, dev_priv->savePIPEB_LINK_M1);
+		I915_WRITE(_PIPEB_LINK_N1, dev_priv->savePIPEB_LINK_N1);
+
+		I915_WRITE(_FDI_RXB_CTL, dev_priv->saveFDI_RXB_CTL);
+		I915_WRITE(_FDI_TXB_CTL, dev_priv->saveFDI_TXB_CTL);
+
+		I915_WRITE(_PFB_CTL_1, dev_priv->savePFB_CTL_1);
+		I915_WRITE(_PFB_WIN_SZ, dev_priv->savePFB_WIN_SZ);
+		I915_WRITE(_PFB_WIN_POS, dev_priv->savePFB_WIN_POS);
+
+		I915_WRITE(_TRANSBCONF, dev_priv->saveTRANSBCONF);
+		I915_WRITE(_TRANS_HTOTAL_B, dev_priv->saveTRANS_HTOTAL_B);
+		I915_WRITE(_TRANS_HBLANK_B, dev_priv->saveTRANS_HBLANK_B);
+		I915_WRITE(_TRANS_HSYNC_B, dev_priv->saveTRANS_HSYNC_B);
+		I915_WRITE(_TRANS_VTOTAL_B, dev_priv->saveTRANS_VTOTAL_B);
+		I915_WRITE(_TRANS_VBLANK_B, dev_priv->saveTRANS_VBLANK_B);
+		I915_WRITE(_TRANS_VSYNC_B, dev_priv->saveTRANS_VSYNC_B);
+	}
+
+	/* Restore plane info */
+	I915_WRITE(_DSPBSIZE, dev_priv->saveDSPBSIZE);
+	I915_WRITE(_DSPBPOS, dev_priv->saveDSPBPOS);
+	I915_WRITE(_PIPEBSRC, dev_priv->savePIPEBSRC);
+	I915_WRITE(_DSPBADDR, dev_priv->saveDSPBADDR);
+	I915_WRITE(_DSPBSTRIDE, dev_priv->saveDSPBSTRIDE);
+	if (INTEL_INFO(dev)->gen >= 4) {
+		I915_WRITE(_DSPBSURF, dev_priv->saveDSPBSURF);
+		I915_WRITE(_DSPBTILEOFF, dev_priv->saveDSPBTILEOFF);
+	}
+
+	I915_WRITE(_PIPEBCONF, dev_priv->savePIPEBCONF);
+
+	i915_restore_palette(dev, PIPE_B);
+	/* Enable the plane */
+	I915_WRITE(_DSPBCNTR, dev_priv->saveDSPBCNTR);
+	I915_WRITE(_DSPBADDR, I915_READ(_DSPBADDR));
+
+	/* Cursor state */
+	I915_WRITE(_CURAPOS, dev_priv->saveCURAPOS);
+	I915_WRITE(_CURACNTR, dev_priv->saveCURACNTR);
+	I915_WRITE(_CURABASE, dev_priv->saveCURABASE);
+	I915_WRITE(_CURBPOS, dev_priv->saveCURBPOS);
+	I915_WRITE(_CURBCNTR, dev_priv->saveCURBCNTR);
+	I915_WRITE(_CURBBASE, dev_priv->saveCURBBASE);
+	if (IS_GEN2(dev))
+		I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
+
+	return;
+}
+
+static void i915_save_display(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* Display arbitration control */
+	dev_priv->saveDSPARB = I915_READ(DSPARB);
+
+	/* This is only meaningful in non-KMS mode */
+	/* Don't save them in KMS mode */
+	i915_save_modeset_reg(dev);
+
+	/* CRT state */
+	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->saveADPA = I915_READ(PCH_ADPA);
+	} else {
+		dev_priv->saveADPA = I915_READ(ADPA);
+	}
+
+	/* LVDS state */
+	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->savePP_CONTROL = I915_READ(PCH_PP_CONTROL);
+		dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1);
+		dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2);
+		dev_priv->saveBLC_CPU_PWM_CTL = I915_READ(BLC_PWM_CPU_CTL);
+		dev_priv->saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2);
+		dev_priv->saveLVDS = I915_READ(PCH_LVDS);
+	} else {
+		dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
+		dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
+		dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+		dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL);
+		if (INTEL_INFO(dev)->gen >= 4)
+			dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
+		if (IS_MOBILE(dev) && !IS_I830(dev))
+			dev_priv->saveLVDS = I915_READ(LVDS);
+	}
+
+	if (!IS_I830(dev) && !IS_845G(dev) && !HAS_PCH_SPLIT(dev))
+		dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->savePP_ON_DELAYS = I915_READ(PCH_PP_ON_DELAYS);
+		dev_priv->savePP_OFF_DELAYS = I915_READ(PCH_PP_OFF_DELAYS);
+		dev_priv->savePP_DIVISOR = I915_READ(PCH_PP_DIVISOR);
+	} else {
+		dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
+		dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
+		dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
+	}
+
+	/* Display Port state */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		dev_priv->saveDP_B = I915_READ(DP_B);
+		dev_priv->saveDP_C = I915_READ(DP_C);
+		dev_priv->saveDP_D = I915_READ(DP_D);
+		dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(_PIPEA_GMCH_DATA_M);
+		dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(_PIPEB_GMCH_DATA_M);
+		dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(_PIPEA_GMCH_DATA_N);
+		dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(_PIPEB_GMCH_DATA_N);
+		dev_priv->savePIPEA_DP_LINK_M = I915_READ(_PIPEA_DP_LINK_M);
+		dev_priv->savePIPEB_DP_LINK_M = I915_READ(_PIPEB_DP_LINK_M);
+		dev_priv->savePIPEA_DP_LINK_N = I915_READ(_PIPEA_DP_LINK_N);
+		dev_priv->savePIPEB_DP_LINK_N = I915_READ(_PIPEB_DP_LINK_N);
+	}
+	/* FIXME: save TV & SDVO state */
+
+	/* Only save FBC state on the platform that supports FBC */
+	if (I915_HAS_FBC(dev)) {
+		if (HAS_PCH_SPLIT(dev)) {
+			dev_priv->saveDPFC_CB_BASE = I915_READ(ILK_DPFC_CB_BASE);
+		} else if (IS_GM45(dev)) {
+			dev_priv->saveDPFC_CB_BASE = I915_READ(DPFC_CB_BASE);
+		} else {
+			dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
+			dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
+			dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
+			dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
+		}
+	}
+
+	/* VGA state */
+	dev_priv->saveVGA0 = I915_READ(VGA0);
+	dev_priv->saveVGA1 = I915_READ(VGA1);
+	dev_priv->saveVGA_PD = I915_READ(VGA_PD);
+	if (HAS_PCH_SPLIT(dev))
+		dev_priv->saveVGACNTRL = I915_READ(CPU_VGACNTRL);
+	else
+		dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
+
+	i915_save_vga(dev);
+}
+
+static void i915_restore_display(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* Display arbitration */
+	I915_WRITE(DSPARB, dev_priv->saveDSPARB);
+
+	/* Display port ratios (must be done before clock is set) */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		I915_WRITE(_PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
+		I915_WRITE(_PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M);
+		I915_WRITE(_PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N);
+		I915_WRITE(_PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N);
+		I915_WRITE(_PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M);
+		I915_WRITE(_PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M);
+		I915_WRITE(_PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
+		I915_WRITE(_PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
+	}
+
+	/* This is only meaningful in non-KMS mode */
+	/* Don't restore them in KMS mode */
+	i915_restore_modeset_reg(dev);
+
+	/* CRT state */
+	if (HAS_PCH_SPLIT(dev))
+		I915_WRITE(PCH_ADPA, dev_priv->saveADPA);
+	else
+		I915_WRITE(ADPA, dev_priv->saveADPA);
+
+	/* LVDS state */
+	if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
+		I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(PCH_LVDS, dev_priv->saveLVDS);
+	} else if (IS_MOBILE(dev) && !IS_I830(dev))
+		I915_WRITE(LVDS, dev_priv->saveLVDS);
+
+	if (!IS_I830(dev) && !IS_845G(dev) && !HAS_PCH_SPLIT(dev))
+		I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL);
+		I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2);
+		/* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2;
+		 * otherwise we get blank eDP screen after S3 on some machines
+		 */
+		I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2);
+		I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
+		I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
+		I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
+		I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
+		I915_WRITE(PCH_PP_CONTROL, dev_priv->savePP_CONTROL);
+		I915_WRITE(RSTDBYCTL,
+			   dev_priv->saveMCHBAR_RENDER_STANDBY);
+	} else {
+		I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
+		I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
+		I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL);
+		I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
+		I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
+		I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
+		I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+	}
+
+	/* Display Port state */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		I915_WRITE(DP_B, dev_priv->saveDP_B);
+		I915_WRITE(DP_C, dev_priv->saveDP_C);
+		I915_WRITE(DP_D, dev_priv->saveDP_D);
+	}
+	/* FIXME: restore TV & SDVO state */
+
+	/* only restore FBC info on the platform that supports FBC*/
+	intel_disable_fbc(dev);
+	if (I915_HAS_FBC(dev)) {
+		if (HAS_PCH_SPLIT(dev)) {
+			I915_WRITE(ILK_DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE);
+		} else if (IS_GM45(dev)) {
+			I915_WRITE(DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE);
+		} else {
+			I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE);
+			I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE);
+			I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2);
+			I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL);
+		}
+	}
+	/* VGA state */
+	if (HAS_PCH_SPLIT(dev))
+		I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL);
+	else
+		I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
+
+	I915_WRITE(VGA0, dev_priv->saveVGA0);
+	I915_WRITE(VGA1, dev_priv->saveVGA1);
+	I915_WRITE(VGA_PD, dev_priv->saveVGA_PD);
+	POSTING_READ(VGA_PD);
+	udelay(150);
+
+	i915_restore_vga(dev);
+}
+
+int i915_save_state(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+
+	pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+
+	mutex_lock(&dev->struct_mutex);
+
+	/* Hardware status page */
+	dev_priv->saveHWS = I915_READ(HWS_PGA);
+
+	i915_save_display(dev);
+
+	/* Interrupt state */
+	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->saveDEIER = I915_READ(DEIER);
+		dev_priv->saveDEIMR = I915_READ(DEIMR);
+		dev_priv->saveGTIER = I915_READ(GTIER);
+		dev_priv->saveGTIMR = I915_READ(GTIMR);
+		dev_priv->saveFDI_RXA_IMR = I915_READ(_FDI_RXA_IMR);
+		dev_priv->saveFDI_RXB_IMR = I915_READ(_FDI_RXB_IMR);
+		dev_priv->saveMCHBAR_RENDER_STANDBY =
+			I915_READ(RSTDBYCTL);
+		dev_priv->savePCH_PORT_HOTPLUG = I915_READ(PCH_PORT_HOTPLUG);
+	} else {
+		dev_priv->saveIER = I915_READ(IER);
+		dev_priv->saveIMR = I915_READ(IMR);
+	}
+
+	if (IS_IRONLAKE_M(dev))
+		ironlake_disable_drps(dev);
+	if (INTEL_INFO(dev)->gen >= 6)
+		gen6_disable_rps(dev);
+
+	/* Cache mode state */
+	dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0);
+
+	/* Memory Arbitration state */
+	dev_priv->saveMI_ARB_STATE = I915_READ(MI_ARB_STATE);
+
+	/* Scratch space */
+	for (i = 0; i < 16; i++) {
+		dev_priv->saveSWF0[i] = I915_READ(SWF00 + (i << 2));
+		dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2));
+	}
+	for (i = 0; i < 3; i++)
+		dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+int i915_restore_state(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+
+	pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
+
+	mutex_lock(&dev->struct_mutex);
+
+	/* Hardware status page */
+	I915_WRITE(HWS_PGA, dev_priv->saveHWS);
+
+	i915_restore_display(dev);
+
+	/* Interrupt state */
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(DEIER, dev_priv->saveDEIER);
+		I915_WRITE(DEIMR, dev_priv->saveDEIMR);
+		I915_WRITE(GTIER, dev_priv->saveGTIER);
+		I915_WRITE(GTIMR, dev_priv->saveGTIMR);
+		I915_WRITE(_FDI_RXA_IMR, dev_priv->saveFDI_RXA_IMR);
+		I915_WRITE(_FDI_RXB_IMR, dev_priv->saveFDI_RXB_IMR);
+		I915_WRITE(PCH_PORT_HOTPLUG, dev_priv->savePCH_PORT_HOTPLUG);
+	} else {
+		I915_WRITE(IER, dev_priv->saveIER);
+		I915_WRITE(IMR, dev_priv->saveIMR);
+	}
+	mutex_unlock(&dev->struct_mutex);
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		intel_init_clock_gating(dev);
+
+	if (IS_IRONLAKE_M(dev)) {
+		ironlake_enable_drps(dev);
+		intel_init_emon(dev);
+	}
+
+	if (INTEL_INFO(dev)->gen >= 6) {
+		gen6_enable_rps(dev_priv);
+		gen6_update_ring_freq(dev_priv);
+	}
+
+	mutex_lock(&dev->struct_mutex);
+
+	/* Cache mode state */
+	I915_WRITE(CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);
+
+	/* Memory arbitration state */
+	I915_WRITE(MI_ARB_STATE, dev_priv->saveMI_ARB_STATE | 0xffff0000);
+
+	for (i = 0; i < 16; i++) {
+		I915_WRITE(SWF00 + (i << 2), dev_priv->saveSWF0[i]);
+		I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i]);
+	}
+	for (i = 0; i < 3; i++)
+		I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	intel_i2c_reset(dev);
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/i915/i915_trace.h b/drivers/gpu/drm/i915/i915_trace.h
new file mode 100644
index 00000000..dac7bba4
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_trace.h
@@ -0,0 +1,418 @@
+#if !defined(_I915_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _I915_TRACE_H_
+
+#include <linux/stringify.h>
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+#include <drm/drmP.h>
+#include "i915_drv.h"
+#include "intel_ringbuffer.h"
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM i915
+#define TRACE_SYSTEM_STRING __stringify(TRACE_SYSTEM)
+#define TRACE_INCLUDE_FILE i915_trace
+
+/* object tracking */
+
+TRACE_EVENT(i915_gem_object_create,
+	    TP_PROTO(struct drm_i915_gem_object *obj),
+	    TP_ARGS(obj),
+
+	    TP_STRUCT__entry(
+			     __field(struct drm_i915_gem_object *, obj)
+			     __field(u32, size)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->obj = obj;
+			   __entry->size = obj->base.size;
+			   ),
+
+	    TP_printk("obj=%p, size=%u", __entry->obj, __entry->size)
+);
+
+TRACE_EVENT(i915_gem_object_bind,
+	    TP_PROTO(struct drm_i915_gem_object *obj, bool mappable),
+	    TP_ARGS(obj, mappable),
+
+	    TP_STRUCT__entry(
+			     __field(struct drm_i915_gem_object *, obj)
+			     __field(u32, offset)
+			     __field(u32, size)
+			     __field(bool, mappable)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->obj = obj;
+			   __entry->offset = obj->gtt_space->start;
+			   __entry->size = obj->gtt_space->size;
+			   __entry->mappable = mappable;
+			   ),
+
+	    TP_printk("obj=%p, offset=%08x size=%x%s",
+		      __entry->obj, __entry->offset, __entry->size,
+		      __entry->mappable ? ", mappable" : "")
+);
+
+TRACE_EVENT(i915_gem_object_unbind,
+	    TP_PROTO(struct drm_i915_gem_object *obj),
+	    TP_ARGS(obj),
+
+	    TP_STRUCT__entry(
+			     __field(struct drm_i915_gem_object *, obj)
+			     __field(u32, offset)
+			     __field(u32, size)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->obj = obj;
+			   __entry->offset = obj->gtt_space->start;
+			   __entry->size = obj->gtt_space->size;
+			   ),
+
+	    TP_printk("obj=%p, offset=%08x size=%x",
+		      __entry->obj, __entry->offset, __entry->size)
+);
+
+TRACE_EVENT(i915_gem_object_change_domain,
+	    TP_PROTO(struct drm_i915_gem_object *obj, u32 old_read, u32 old_write),
+	    TP_ARGS(obj, old_read, old_write),
+
+	    TP_STRUCT__entry(
+			     __field(struct drm_i915_gem_object *, obj)
+			     __field(u32, read_domains)
+			     __field(u32, write_domain)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->obj = obj;
+			   __entry->read_domains = obj->base.read_domains | (old_read << 16);
+			   __entry->write_domain = obj->base.write_domain | (old_write << 16);
+			   ),
+
+	    TP_printk("obj=%p, read=%02x=>%02x, write=%02x=>%02x",
+		      __entry->obj,
+		      __entry->read_domains >> 16,
+		      __entry->read_domains & 0xffff,
+		      __entry->write_domain >> 16,
+		      __entry->write_domain & 0xffff)
+);
+
+TRACE_EVENT(i915_gem_object_pwrite,
+	    TP_PROTO(struct drm_i915_gem_object *obj, u32 offset, u32 len),
+	    TP_ARGS(obj, offset, len),
+
+	    TP_STRUCT__entry(
+			     __field(struct drm_i915_gem_object *, obj)
+			     __field(u32, offset)
+			     __field(u32, len)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->obj = obj;
+			   __entry->offset = offset;
+			   __entry->len = len;
+			   ),
+
+	    TP_printk("obj=%p, offset=%u, len=%u",
+		      __entry->obj, __entry->offset, __entry->len)
+);
+
+TRACE_EVENT(i915_gem_object_pread,
+	    TP_PROTO(struct drm_i915_gem_object *obj, u32 offset, u32 len),
+	    TP_ARGS(obj, offset, len),
+
+	    TP_STRUCT__entry(
+			     __field(struct drm_i915_gem_object *, obj)
+			     __field(u32, offset)
+			     __field(u32, len)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->obj = obj;
+			   __entry->offset = offset;
+			   __entry->len = len;
+			   ),
+
+	    TP_printk("obj=%p, offset=%u, len=%u",
+		      __entry->obj, __entry->offset, __entry->len)
+);
+
+TRACE_EVENT(i915_gem_object_fault,
+	    TP_PROTO(struct drm_i915_gem_object *obj, u32 index, bool gtt, bool write),
+	    TP_ARGS(obj, index, gtt, write),
+
+	    TP_STRUCT__entry(
+			     __field(struct drm_i915_gem_object *, obj)
+			     __field(u32, index)
+			     __field(bool, gtt)
+			     __field(bool, write)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->obj = obj;
+			   __entry->index = index;
+			   __entry->gtt = gtt;
+			   __entry->write = write;
+			   ),
+
+	    TP_printk("obj=%p, %s index=%u %s",
+		      __entry->obj,
+		      __entry->gtt ? "GTT" : "CPU",
+		      __entry->index,
+		      __entry->write ? ", writable" : "")
+);
+
+DECLARE_EVENT_CLASS(i915_gem_object,
+	    TP_PROTO(struct drm_i915_gem_object *obj),
+	    TP_ARGS(obj),
+
+	    TP_STRUCT__entry(
+			     __field(struct drm_i915_gem_object *, obj)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->obj = obj;
+			   ),
+
+	    TP_printk("obj=%p", __entry->obj)
+);
+
+DEFINE_EVENT(i915_gem_object, i915_gem_object_clflush,
+	     TP_PROTO(struct drm_i915_gem_object *obj),
+	     TP_ARGS(obj)
+);
+
+DEFINE_EVENT(i915_gem_object, i915_gem_object_destroy,
+	    TP_PROTO(struct drm_i915_gem_object *obj),
+	    TP_ARGS(obj)
+);
+
+TRACE_EVENT(i915_gem_evict,
+	    TP_PROTO(struct drm_device *dev, u32 size, u32 align, bool mappable),
+	    TP_ARGS(dev, size, align, mappable),
+
+	    TP_STRUCT__entry(
+			     __field(u32, dev)
+			     __field(u32, size)
+			     __field(u32, align)
+			     __field(bool, mappable)
+			    ),
+
+	    TP_fast_assign(
+			   __entry->dev = dev->primary->index;
+			   __entry->size = size;
+			   __entry->align = align;
+			   __entry->mappable = mappable;
+			  ),
+
+	    TP_printk("dev=%d, size=%d, align=%d %s",
+		      __entry->dev, __entry->size, __entry->align,
+		      __entry->mappable ? ", mappable" : "")
+);
+
+TRACE_EVENT(i915_gem_evict_everything,
+	    TP_PROTO(struct drm_device *dev, bool purgeable),
+	    TP_ARGS(dev, purgeable),
+
+	    TP_STRUCT__entry(
+			     __field(u32, dev)
+			     __field(bool, purgeable)
+			    ),
+
+	    TP_fast_assign(
+			   __entry->dev = dev->primary->index;
+			   __entry->purgeable = purgeable;
+			  ),
+
+	    TP_printk("dev=%d%s",
+		      __entry->dev,
+		      __entry->purgeable ? ", purgeable only" : "")
+);
+
+TRACE_EVENT(i915_gem_ring_dispatch,
+	    TP_PROTO(struct intel_ring_buffer *ring, u32 seqno),
+	    TP_ARGS(ring, seqno),
+
+	    TP_STRUCT__entry(
+			     __field(u32, dev)
+			     __field(u32, ring)
+			     __field(u32, seqno)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->dev = ring->dev->primary->index;
+			   __entry->ring = ring->id;
+			   __entry->seqno = seqno;
+			   i915_trace_irq_get(ring, seqno);
+			   ),
+
+	    TP_printk("dev=%u, ring=%u, seqno=%u",
+		      __entry->dev, __entry->ring, __entry->seqno)
+);
+
+TRACE_EVENT(i915_gem_ring_flush,
+	    TP_PROTO(struct intel_ring_buffer *ring, u32 invalidate, u32 flush),
+	    TP_ARGS(ring, invalidate, flush),
+
+	    TP_STRUCT__entry(
+			     __field(u32, dev)
+			     __field(u32, ring)
+			     __field(u32, invalidate)
+			     __field(u32, flush)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->dev = ring->dev->primary->index;
+			   __entry->ring = ring->id;
+			   __entry->invalidate = invalidate;
+			   __entry->flush = flush;
+			   ),
+
+	    TP_printk("dev=%u, ring=%x, invalidate=%04x, flush=%04x",
+		      __entry->dev, __entry->ring,
+		      __entry->invalidate, __entry->flush)
+);
+
+DECLARE_EVENT_CLASS(i915_gem_request,
+	    TP_PROTO(struct intel_ring_buffer *ring, u32 seqno),
+	    TP_ARGS(ring, seqno),
+
+	    TP_STRUCT__entry(
+			     __field(u32, dev)
+			     __field(u32, ring)
+			     __field(u32, seqno)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->dev = ring->dev->primary->index;
+			   __entry->ring = ring->id;
+			   __entry->seqno = seqno;
+			   ),
+
+	    TP_printk("dev=%u, ring=%u, seqno=%u",
+		      __entry->dev, __entry->ring, __entry->seqno)
+);
+
+DEFINE_EVENT(i915_gem_request, i915_gem_request_add,
+	    TP_PROTO(struct intel_ring_buffer *ring, u32 seqno),
+	    TP_ARGS(ring, seqno)
+);
+
+DEFINE_EVENT(i915_gem_request, i915_gem_request_complete,
+	    TP_PROTO(struct intel_ring_buffer *ring, u32 seqno),
+	    TP_ARGS(ring, seqno)
+);
+
+DEFINE_EVENT(i915_gem_request, i915_gem_request_retire,
+	    TP_PROTO(struct intel_ring_buffer *ring, u32 seqno),
+	    TP_ARGS(ring, seqno)
+);
+
+DEFINE_EVENT(i915_gem_request, i915_gem_request_wait_begin,
+	    TP_PROTO(struct intel_ring_buffer *ring, u32 seqno),
+	    TP_ARGS(ring, seqno)
+);
+
+DEFINE_EVENT(i915_gem_request, i915_gem_request_wait_end,
+	    TP_PROTO(struct intel_ring_buffer *ring, u32 seqno),
+	    TP_ARGS(ring, seqno)
+);
+
+DECLARE_EVENT_CLASS(i915_ring,
+	    TP_PROTO(struct intel_ring_buffer *ring),
+	    TP_ARGS(ring),
+
+	    TP_STRUCT__entry(
+			     __field(u32, dev)
+			     __field(u32, ring)
+			     ),
+
+	    TP_fast_assign(
+			   __entry->dev = ring->dev->primary->index;
+			   __entry->ring = ring->id;
+			   ),
+
+	    TP_printk("dev=%u, ring=%u", __entry->dev, __entry->ring)
+);
+
+DEFINE_EVENT(i915_ring, i915_ring_wait_begin,
+	    TP_PROTO(struct intel_ring_buffer *ring),
+	    TP_ARGS(ring)
+);
+
+DEFINE_EVENT(i915_ring, i915_ring_wait_end,
+	    TP_PROTO(struct intel_ring_buffer *ring),
+	    TP_ARGS(ring)
+);
+
+TRACE_EVENT(i915_flip_request,
+	    TP_PROTO(int plane, struct drm_i915_gem_object *obj),
+
+	    TP_ARGS(plane, obj),
+
+	    TP_STRUCT__entry(
+		    __field(int, plane)
+		    __field(struct drm_i915_gem_object *, obj)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->plane = plane;
+		    __entry->obj = obj;
+		    ),
+
+	    TP_printk("plane=%d, obj=%p", __entry->plane, __entry->obj)
+);
+
+TRACE_EVENT(i915_flip_complete,
+	    TP_PROTO(int plane, struct drm_i915_gem_object *obj),
+
+	    TP_ARGS(plane, obj),
+
+	    TP_STRUCT__entry(
+		    __field(int, plane)
+		    __field(struct drm_i915_gem_object *, obj)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->plane = plane;
+		    __entry->obj = obj;
+		    ),
+
+	    TP_printk("plane=%d, obj=%p", __entry->plane, __entry->obj)
+);
+
+TRACE_EVENT(i915_reg_rw,
+	TP_PROTO(bool write, u32 reg, u64 val, int len),
+
+	TP_ARGS(write, reg, val, len),
+
+	TP_STRUCT__entry(
+		__field(u64, val)
+		__field(u32, reg)
+		__field(u16, write)
+		__field(u16, len)
+		),
+
+	TP_fast_assign(
+		__entry->val = (u64)val;
+		__entry->reg = reg;
+		__entry->write = write;
+		__entry->len = len;
+		),
+
+	TP_printk("%s reg=0x%x, len=%d, val=(0x%x, 0x%x)",
+		__entry->write ? "write" : "read",
+		__entry->reg, __entry->len,
+		(u32)(__entry->val & 0xffffffff),
+		(u32)(__entry->val >> 32))
+);
+
+#endif /* _I915_TRACE_H_ */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#include <trace/define_trace.h>
diff --git a/drivers/gpu/drm/i915/i915_trace_points.c b/drivers/gpu/drm/i915/i915_trace_points.c
new file mode 100644
index 00000000..ead876eb
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_trace_points.c
@@ -0,0 +1,11 @@
+/*
+ * Copyright © 2009 Intel Corporation
+ *
+ * Authors:
+ *    Chris Wilson <chris@chris-wilson.co.uk>
+ */
+
+#include "i915_drv.h"
+
+#define CREATE_TRACE_POINTS
+#include "i915_trace.h"
diff --git a/drivers/gpu/drm/i915/intel_acpi.c b/drivers/gpu/drm/i915/intel_acpi.c
new file mode 100644
index 00000000..bae3edf9
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_acpi.c
@@ -0,0 +1,252 @@
+/*
+ * Intel ACPI functions
+ *
+ * _DSM related code stolen from nouveau_acpi.c.
+ */
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <linux/vga_switcheroo.h>
+#include <acpi/acpi_drivers.h>
+
+#include "drmP.h"
+
+#define INTEL_DSM_REVISION_ID 1 /* For Calpella anyway... */
+
+#define INTEL_DSM_FN_SUPPORTED_FUNCTIONS 0 /* No args */
+#define INTEL_DSM_FN_PLATFORM_MUX_INFO 1 /* No args */
+
+static struct intel_dsm_priv {
+	acpi_handle dhandle;
+} intel_dsm_priv;
+
+static const u8 intel_dsm_guid[] = {
+	0xd3, 0x73, 0xd8, 0x7e,
+	0xd0, 0xc2,
+	0x4f, 0x4e,
+	0xa8, 0x54,
+	0x0f, 0x13, 0x17, 0xb0, 0x1c, 0x2c
+};
+
+static int intel_dsm(acpi_handle handle, int func, int arg)
+{
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_object_list input;
+	union acpi_object params[4];
+	union acpi_object *obj;
+	u32 result;
+	int ret = 0;
+
+	input.count = 4;
+	input.pointer = params;
+	params[0].type = ACPI_TYPE_BUFFER;
+	params[0].buffer.length = sizeof(intel_dsm_guid);
+	params[0].buffer.pointer = (char *)intel_dsm_guid;
+	params[1].type = ACPI_TYPE_INTEGER;
+	params[1].integer.value = INTEL_DSM_REVISION_ID;
+	params[2].type = ACPI_TYPE_INTEGER;
+	params[2].integer.value = func;
+	params[3].type = ACPI_TYPE_INTEGER;
+	params[3].integer.value = arg;
+
+	ret = acpi_evaluate_object(handle, "_DSM", &input, &output);
+	if (ret) {
+		DRM_DEBUG_DRIVER("failed to evaluate _DSM: %d\n", ret);
+		return ret;
+	}
+
+	obj = (union acpi_object *)output.pointer;
+
+	result = 0;
+	switch (obj->type) {
+	case ACPI_TYPE_INTEGER:
+		result = obj->integer.value;
+		break;
+
+	case ACPI_TYPE_BUFFER:
+		if (obj->buffer.length == 4) {
+			result = (obj->buffer.pointer[0] |
+				(obj->buffer.pointer[1] <<  8) |
+				(obj->buffer.pointer[2] << 16) |
+				(obj->buffer.pointer[3] << 24));
+			break;
+		}
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	if (result == 0x80000002)
+		ret = -ENODEV;
+
+	kfree(output.pointer);
+	return ret;
+}
+
+static char *intel_dsm_port_name(u8 id)
+{
+	switch (id) {
+	case 0:
+		return "Reserved";
+	case 1:
+		return "Analog VGA";
+	case 2:
+		return "LVDS";
+	case 3:
+		return "Reserved";
+	case 4:
+		return "HDMI/DVI_B";
+	case 5:
+		return "HDMI/DVI_C";
+	case 6:
+		return "HDMI/DVI_D";
+	case 7:
+		return "DisplayPort_A";
+	case 8:
+		return "DisplayPort_B";
+	case 9:
+		return "DisplayPort_C";
+	case 0xa:
+		return "DisplayPort_D";
+	case 0xb:
+	case 0xc:
+	case 0xd:
+		return "Reserved";
+	case 0xe:
+		return "WiDi";
+	default:
+		return "bad type";
+	}
+}
+
+static char *intel_dsm_mux_type(u8 type)
+{
+	switch (type) {
+	case 0:
+		return "unknown";
+	case 1:
+		return "No MUX, iGPU only";
+	case 2:
+		return "No MUX, dGPU only";
+	case 3:
+		return "MUXed between iGPU and dGPU";
+	default:
+		return "bad type";
+	}
+}
+
+static void intel_dsm_platform_mux_info(void)
+{
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_object_list input;
+	union acpi_object params[4];
+	union acpi_object *pkg;
+	int i, ret;
+
+	input.count = 4;
+	input.pointer = params;
+	params[0].type = ACPI_TYPE_BUFFER;
+	params[0].buffer.length = sizeof(intel_dsm_guid);
+	params[0].buffer.pointer = (char *)intel_dsm_guid;
+	params[1].type = ACPI_TYPE_INTEGER;
+	params[1].integer.value = INTEL_DSM_REVISION_ID;
+	params[2].type = ACPI_TYPE_INTEGER;
+	params[2].integer.value = INTEL_DSM_FN_PLATFORM_MUX_INFO;
+	params[3].type = ACPI_TYPE_INTEGER;
+	params[3].integer.value = 0;
+
+	ret = acpi_evaluate_object(intel_dsm_priv.dhandle, "_DSM", &input,
+				   &output);
+	if (ret) {
+		DRM_DEBUG_DRIVER("failed to evaluate _DSM: %d\n", ret);
+		goto out;
+	}
+
+	pkg = (union acpi_object *)output.pointer;
+
+	if (pkg->type == ACPI_TYPE_PACKAGE) {
+		union acpi_object *connector_count = &pkg->package.elements[0];
+		DRM_DEBUG_DRIVER("MUX info connectors: %lld\n",
+			  (unsigned long long)connector_count->integer.value);
+		for (i = 1; i < pkg->package.count; i++) {
+			union acpi_object *obj = &pkg->package.elements[i];
+			union acpi_object *connector_id =
+				&obj->package.elements[0];
+			union acpi_object *info = &obj->package.elements[1];
+			DRM_DEBUG_DRIVER("Connector id: 0x%016llx\n",
+				  (unsigned long long)connector_id->integer.value);
+			DRM_DEBUG_DRIVER("  port id: %s\n",
+			       intel_dsm_port_name(info->buffer.pointer[0]));
+			DRM_DEBUG_DRIVER("  display mux info: %s\n",
+			       intel_dsm_mux_type(info->buffer.pointer[1]));
+			DRM_DEBUG_DRIVER("  aux/dc mux info: %s\n",
+			       intel_dsm_mux_type(info->buffer.pointer[2]));
+			DRM_DEBUG_DRIVER("  hpd mux info: %s\n",
+			       intel_dsm_mux_type(info->buffer.pointer[3]));
+		}
+	} else {
+		DRM_ERROR("MUX INFO call failed\n");
+	}
+
+out:
+	kfree(output.pointer);
+}
+
+static bool intel_dsm_pci_probe(struct pci_dev *pdev)
+{
+	acpi_handle dhandle, intel_handle;
+	acpi_status status;
+	int ret;
+
+	dhandle = DEVICE_ACPI_HANDLE(&pdev->dev);
+	if (!dhandle)
+		return false;
+
+	status = acpi_get_handle(dhandle, "_DSM", &intel_handle);
+	if (ACPI_FAILURE(status)) {
+		DRM_DEBUG_KMS("no _DSM method for intel device\n");
+		return false;
+	}
+
+	ret = intel_dsm(dhandle, INTEL_DSM_FN_SUPPORTED_FUNCTIONS, 0);
+	if (ret < 0) {
+		DRM_DEBUG_KMS("failed to get supported _DSM functions\n");
+		return false;
+	}
+
+	intel_dsm_priv.dhandle = dhandle;
+
+	intel_dsm_platform_mux_info();
+	return true;
+}
+
+static bool intel_dsm_detect(void)
+{
+	char acpi_method_name[255] = { 0 };
+	struct acpi_buffer buffer = {sizeof(acpi_method_name), acpi_method_name};
+	struct pci_dev *pdev = NULL;
+	bool has_dsm = false;
+	int vga_count = 0;
+
+	while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, pdev)) != NULL) {
+		vga_count++;
+		has_dsm |= intel_dsm_pci_probe(pdev);
+	}
+
+	if (vga_count == 2 && has_dsm) {
+		acpi_get_name(intel_dsm_priv.dhandle, ACPI_FULL_PATHNAME, &buffer);
+		DRM_DEBUG_DRIVER("VGA switcheroo: detected DSM switching method %s handle\n",
+				 acpi_method_name);
+		return true;
+	}
+
+	return false;
+}
+
+void intel_register_dsm_handler(void)
+{
+	if (!intel_dsm_detect())
+		return;
+}
+
+void intel_unregister_dsm_handler(void)
+{
+}
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
new file mode 100644
index 00000000..b48fc2a8
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -0,0 +1,732 @@
+/*
+ * Copyright © 2006 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+#include <linux/dmi.h>
+#include <drm/drm_dp_helper.h>
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_bios.h"
+
+#define	SLAVE_ADDR1	0x70
+#define	SLAVE_ADDR2	0x72
+
+static int panel_type;
+
+static void *
+find_section(struct bdb_header *bdb, int section_id)
+{
+	u8 *base = (u8 *)bdb;
+	int index = 0;
+	u16 total, current_size;
+	u8 current_id;
+
+	/* skip to first section */
+	index += bdb->header_size;
+	total = bdb->bdb_size;
+
+	/* walk the sections looking for section_id */
+	while (index < total) {
+		current_id = *(base + index);
+		index++;
+		current_size = *((u16 *)(base + index));
+		index += 2;
+		if (current_id == section_id)
+			return base + index;
+		index += current_size;
+	}
+
+	return NULL;
+}
+
+static u16
+get_blocksize(void *p)
+{
+	u16 *block_ptr, block_size;
+
+	block_ptr = (u16 *)((char *)p - 2);
+	block_size = *block_ptr;
+	return block_size;
+}
+
+static void
+fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
+			const struct lvds_dvo_timing *dvo_timing)
+{
+	panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
+		dvo_timing->hactive_lo;
+	panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
+		((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
+	panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
+		dvo_timing->hsync_pulse_width;
+	panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
+		((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
+
+	panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
+		dvo_timing->vactive_lo;
+	panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
+		dvo_timing->vsync_off;
+	panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
+		dvo_timing->vsync_pulse_width;
+	panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
+		((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
+	panel_fixed_mode->clock = dvo_timing->clock * 10;
+	panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+
+	if (dvo_timing->hsync_positive)
+		panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC;
+	else
+		panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC;
+
+	if (dvo_timing->vsync_positive)
+		panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC;
+	else
+		panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC;
+
+	/* Some VBTs have bogus h/vtotal values */
+	if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
+		panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
+	if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
+		panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+
+	drm_mode_set_name(panel_fixed_mode);
+}
+
+static bool
+lvds_dvo_timing_equal_size(const struct lvds_dvo_timing *a,
+			   const struct lvds_dvo_timing *b)
+{
+	if (a->hactive_hi != b->hactive_hi ||
+	    a->hactive_lo != b->hactive_lo)
+		return false;
+
+	if (a->hsync_off_hi != b->hsync_off_hi ||
+	    a->hsync_off_lo != b->hsync_off_lo)
+		return false;
+
+	if (a->hsync_pulse_width != b->hsync_pulse_width)
+		return false;
+
+	if (a->hblank_hi != b->hblank_hi ||
+	    a->hblank_lo != b->hblank_lo)
+		return false;
+
+	if (a->vactive_hi != b->vactive_hi ||
+	    a->vactive_lo != b->vactive_lo)
+		return false;
+
+	if (a->vsync_off != b->vsync_off)
+		return false;
+
+	if (a->vsync_pulse_width != b->vsync_pulse_width)
+		return false;
+
+	if (a->vblank_hi != b->vblank_hi ||
+	    a->vblank_lo != b->vblank_lo)
+		return false;
+
+	return true;
+}
+
+static const struct lvds_dvo_timing *
+get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data,
+		    const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs,
+		    int index)
+{
+	/*
+	 * the size of fp_timing varies on the different platform.
+	 * So calculate the DVO timing relative offset in LVDS data
+	 * entry to get the DVO timing entry
+	 */
+
+	int lfp_data_size =
+		lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset -
+		lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset;
+	int dvo_timing_offset =
+		lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset -
+		lvds_lfp_data_ptrs->ptr[0].fp_timing_offset;
+	char *entry = (char *)lvds_lfp_data->data + lfp_data_size * index;
+
+	return (struct lvds_dvo_timing *)(entry + dvo_timing_offset);
+}
+
+/* Try to find integrated panel data */
+static void
+parse_lfp_panel_data(struct drm_i915_private *dev_priv,
+			    struct bdb_header *bdb)
+{
+	const struct bdb_lvds_options *lvds_options;
+	const struct bdb_lvds_lfp_data *lvds_lfp_data;
+	const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
+	const struct lvds_dvo_timing *panel_dvo_timing;
+	struct drm_display_mode *panel_fixed_mode;
+	int i, downclock;
+
+	lvds_options = find_section(bdb, BDB_LVDS_OPTIONS);
+	if (!lvds_options)
+		return;
+
+	dev_priv->lvds_dither = lvds_options->pixel_dither;
+	if (lvds_options->panel_type == 0xff)
+		return;
+
+	panel_type = lvds_options->panel_type;
+
+	lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
+	if (!lvds_lfp_data)
+		return;
+
+	lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
+	if (!lvds_lfp_data_ptrs)
+		return;
+
+	dev_priv->lvds_vbt = 1;
+
+	panel_dvo_timing = get_lvds_dvo_timing(lvds_lfp_data,
+					       lvds_lfp_data_ptrs,
+					       lvds_options->panel_type);
+
+	panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
+	if (!panel_fixed_mode)
+		return;
+
+	fill_detail_timing_data(panel_fixed_mode, panel_dvo_timing);
+
+	dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode;
+
+	DRM_DEBUG_KMS("Found panel mode in BIOS VBT tables:\n");
+	drm_mode_debug_printmodeline(panel_fixed_mode);
+
+	/*
+	 * Iterate over the LVDS panel timing info to find the lowest clock
+	 * for the native resolution.
+	 */
+	downclock = panel_dvo_timing->clock;
+	for (i = 0; i < 16; i++) {
+		const struct lvds_dvo_timing *dvo_timing;
+
+		dvo_timing = get_lvds_dvo_timing(lvds_lfp_data,
+						 lvds_lfp_data_ptrs,
+						 i);
+		if (lvds_dvo_timing_equal_size(dvo_timing, panel_dvo_timing) &&
+		    dvo_timing->clock < downclock)
+			downclock = dvo_timing->clock;
+	}
+
+	if (downclock < panel_dvo_timing->clock && i915_lvds_downclock) {
+		dev_priv->lvds_downclock_avail = 1;
+		dev_priv->lvds_downclock = downclock * 10;
+		DRM_DEBUG_KMS("LVDS downclock is found in VBT. "
+			      "Normal Clock %dKHz, downclock %dKHz\n",
+			      panel_fixed_mode->clock, 10*downclock);
+	}
+}
+
+/* Try to find sdvo panel data */
+static void
+parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
+		      struct bdb_header *bdb)
+{
+	struct lvds_dvo_timing *dvo_timing;
+	struct drm_display_mode *panel_fixed_mode;
+	int index;
+
+	index = i915_vbt_sdvo_panel_type;
+	if (index == -1) {
+		struct bdb_sdvo_lvds_options *sdvo_lvds_options;
+
+		sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS);
+		if (!sdvo_lvds_options)
+			return;
+
+		index = sdvo_lvds_options->panel_type;
+	}
+
+	dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS);
+	if (!dvo_timing)
+		return;
+
+	panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
+	if (!panel_fixed_mode)
+		return;
+
+	fill_detail_timing_data(panel_fixed_mode, dvo_timing + index);
+
+	dev_priv->sdvo_lvds_vbt_mode = panel_fixed_mode;
+
+	DRM_DEBUG_KMS("Found SDVO panel mode in BIOS VBT tables:\n");
+	drm_mode_debug_printmodeline(panel_fixed_mode);
+}
+
+static int intel_bios_ssc_frequency(struct drm_device *dev,
+				    bool alternate)
+{
+	switch (INTEL_INFO(dev)->gen) {
+	case 2:
+		return alternate ? 66 : 48;
+	case 3:
+	case 4:
+		return alternate ? 100 : 96;
+	default:
+		return alternate ? 100 : 120;
+	}
+}
+
+static void
+parse_general_features(struct drm_i915_private *dev_priv,
+		       struct bdb_header *bdb)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct bdb_general_features *general;
+
+	general = find_section(bdb, BDB_GENERAL_FEATURES);
+	if (general) {
+		dev_priv->int_tv_support = general->int_tv_support;
+		dev_priv->int_crt_support = general->int_crt_support;
+		dev_priv->lvds_use_ssc = general->enable_ssc;
+		dev_priv->lvds_ssc_freq =
+			intel_bios_ssc_frequency(dev, general->ssc_freq);
+		dev_priv->display_clock_mode = general->display_clock_mode;
+		DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d\n",
+			      dev_priv->int_tv_support,
+			      dev_priv->int_crt_support,
+			      dev_priv->lvds_use_ssc,
+			      dev_priv->lvds_ssc_freq,
+			      dev_priv->display_clock_mode);
+	}
+}
+
+static void
+parse_general_definitions(struct drm_i915_private *dev_priv,
+			  struct bdb_header *bdb)
+{
+	struct bdb_general_definitions *general;
+
+	general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+	if (general) {
+		u16 block_size = get_blocksize(general);
+		if (block_size >= sizeof(*general)) {
+			int bus_pin = general->crt_ddc_gmbus_pin;
+			DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin);
+			if (bus_pin >= 1 && bus_pin <= 6)
+				dev_priv->crt_ddc_pin = bus_pin;
+		} else {
+			DRM_DEBUG_KMS("BDB_GD too small (%d). Invalid.\n",
+				  block_size);
+		}
+	}
+}
+
+static void
+parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
+			  struct bdb_header *bdb)
+{
+	struct sdvo_device_mapping *p_mapping;
+	struct bdb_general_definitions *p_defs;
+	struct child_device_config *p_child;
+	int i, child_device_num, count;
+	u16	block_size;
+
+	p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+	if (!p_defs) {
+		DRM_DEBUG_KMS("No general definition block is found, unable to construct sdvo mapping.\n");
+		return;
+	}
+	/* judge whether the size of child device meets the requirements.
+	 * If the child device size obtained from general definition block
+	 * is different with sizeof(struct child_device_config), skip the
+	 * parsing of sdvo device info
+	 */
+	if (p_defs->child_dev_size != sizeof(*p_child)) {
+		/* different child dev size . Ignore it */
+		DRM_DEBUG_KMS("different child size is found. Invalid.\n");
+		return;
+	}
+	/* get the block size of general definitions */
+	block_size = get_blocksize(p_defs);
+	/* get the number of child device */
+	child_device_num = (block_size - sizeof(*p_defs)) /
+				sizeof(*p_child);
+	count = 0;
+	for (i = 0; i < child_device_num; i++) {
+		p_child = &(p_defs->devices[i]);
+		if (!p_child->device_type) {
+			/* skip the device block if device type is invalid */
+			continue;
+		}
+		if (p_child->slave_addr != SLAVE_ADDR1 &&
+			p_child->slave_addr != SLAVE_ADDR2) {
+			/*
+			 * If the slave address is neither 0x70 nor 0x72,
+			 * it is not a SDVO device. Skip it.
+			 */
+			continue;
+		}
+		if (p_child->dvo_port != DEVICE_PORT_DVOB &&
+			p_child->dvo_port != DEVICE_PORT_DVOC) {
+			/* skip the incorrect SDVO port */
+			DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n");
+			continue;
+		}
+		DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on"
+				" %s port\n",
+				p_child->slave_addr,
+				(p_child->dvo_port == DEVICE_PORT_DVOB) ?
+					"SDVOB" : "SDVOC");
+		p_mapping = &(dev_priv->sdvo_mappings[p_child->dvo_port - 1]);
+		if (!p_mapping->initialized) {
+			p_mapping->dvo_port = p_child->dvo_port;
+			p_mapping->slave_addr = p_child->slave_addr;
+			p_mapping->dvo_wiring = p_child->dvo_wiring;
+			p_mapping->ddc_pin = p_child->ddc_pin;
+			p_mapping->i2c_pin = p_child->i2c_pin;
+			p_mapping->initialized = 1;
+			DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n",
+				      p_mapping->dvo_port,
+				      p_mapping->slave_addr,
+				      p_mapping->dvo_wiring,
+				      p_mapping->ddc_pin,
+				      p_mapping->i2c_pin);
+		} else {
+			DRM_DEBUG_KMS("Maybe one SDVO port is shared by "
+					 "two SDVO device.\n");
+		}
+		if (p_child->slave2_addr) {
+			/* Maybe this is a SDVO device with multiple inputs */
+			/* And the mapping info is not added */
+			DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this"
+				" is a SDVO device with multiple inputs.\n");
+		}
+		count++;
+	}
+
+	if (!count) {
+		/* No SDVO device info is found */
+		DRM_DEBUG_KMS("No SDVO device info is found in VBT\n");
+	}
+	return;
+}
+
+static void
+parse_driver_features(struct drm_i915_private *dev_priv,
+		       struct bdb_header *bdb)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct bdb_driver_features *driver;
+
+	driver = find_section(bdb, BDB_DRIVER_FEATURES);
+	if (!driver)
+		return;
+
+	if (SUPPORTS_EDP(dev) &&
+	    driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
+		dev_priv->edp.support = 1;
+
+	if (driver->dual_frequency)
+		dev_priv->render_reclock_avail = true;
+}
+
+static void
+parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
+{
+	struct bdb_edp *edp;
+	struct edp_power_seq *edp_pps;
+	struct edp_link_params *edp_link_params;
+
+	edp = find_section(bdb, BDB_EDP);
+	if (!edp) {
+		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support) {
+			DRM_DEBUG_KMS("No eDP BDB found but eDP panel "
+				      "supported, assume %dbpp panel color "
+				      "depth.\n",
+				      dev_priv->edp.bpp);
+		}
+		return;
+	}
+
+	switch ((edp->color_depth >> (panel_type * 2)) & 3) {
+	case EDP_18BPP:
+		dev_priv->edp.bpp = 18;
+		break;
+	case EDP_24BPP:
+		dev_priv->edp.bpp = 24;
+		break;
+	case EDP_30BPP:
+		dev_priv->edp.bpp = 30;
+		break;
+	}
+
+	/* Get the eDP sequencing and link info */
+	edp_pps = &edp->power_seqs[panel_type];
+	edp_link_params = &edp->link_params[panel_type];
+
+	dev_priv->edp.pps = *edp_pps;
+
+	dev_priv->edp.rate = edp_link_params->rate ? DP_LINK_BW_2_7 :
+		DP_LINK_BW_1_62;
+	switch (edp_link_params->lanes) {
+	case 0:
+		dev_priv->edp.lanes = 1;
+		break;
+	case 1:
+		dev_priv->edp.lanes = 2;
+		break;
+	case 3:
+	default:
+		dev_priv->edp.lanes = 4;
+		break;
+	}
+	switch (edp_link_params->preemphasis) {
+	case 0:
+		dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_0;
+		break;
+	case 1:
+		dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_3_5;
+		break;
+	case 2:
+		dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_6;
+		break;
+	case 3:
+		dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_9_5;
+		break;
+	}
+	switch (edp_link_params->vswing) {
+	case 0:
+		dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_400;
+		break;
+	case 1:
+		dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_600;
+		break;
+	case 2:
+		dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_800;
+		break;
+	case 3:
+		dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_1200;
+		break;
+	}
+}
+
+static void
+parse_device_mapping(struct drm_i915_private *dev_priv,
+		       struct bdb_header *bdb)
+{
+	struct bdb_general_definitions *p_defs;
+	struct child_device_config *p_child, *child_dev_ptr;
+	int i, child_device_num, count;
+	u16	block_size;
+
+	p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+	if (!p_defs) {
+		DRM_DEBUG_KMS("No general definition block is found, no devices defined.\n");
+		return;
+	}
+	/* judge whether the size of child device meets the requirements.
+	 * If the child device size obtained from general definition block
+	 * is different with sizeof(struct child_device_config), skip the
+	 * parsing of sdvo device info
+	 */
+	if (p_defs->child_dev_size != sizeof(*p_child)) {
+		/* different child dev size . Ignore it */
+		DRM_DEBUG_KMS("different child size is found. Invalid.\n");
+		return;
+	}
+	/* get the block size of general definitions */
+	block_size = get_blocksize(p_defs);
+	/* get the number of child device */
+	child_device_num = (block_size - sizeof(*p_defs)) /
+				sizeof(*p_child);
+	count = 0;
+	/* get the number of child device that is present */
+	for (i = 0; i < child_device_num; i++) {
+		p_child = &(p_defs->devices[i]);
+		if (!p_child->device_type) {
+			/* skip the device block if device type is invalid */
+			continue;
+		}
+		count++;
+	}
+	if (!count) {
+		DRM_DEBUG_KMS("no child dev is parsed from VBT\n");
+		return;
+	}
+	dev_priv->child_dev = kcalloc(count, sizeof(*p_child), GFP_KERNEL);
+	if (!dev_priv->child_dev) {
+		DRM_DEBUG_KMS("No memory space for child device\n");
+		return;
+	}
+
+	dev_priv->child_dev_num = count;
+	count = 0;
+	for (i = 0; i < child_device_num; i++) {
+		p_child = &(p_defs->devices[i]);
+		if (!p_child->device_type) {
+			/* skip the device block if device type is invalid */
+			continue;
+		}
+		child_dev_ptr = dev_priv->child_dev + count;
+		count++;
+		memcpy((void *)child_dev_ptr, (void *)p_child,
+					sizeof(*p_child));
+	}
+	return;
+}
+
+static void
+init_vbt_defaults(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+
+	dev_priv->crt_ddc_pin = GMBUS_PORT_VGADDC;
+
+	/* LFP panel data */
+	dev_priv->lvds_dither = 1;
+	dev_priv->lvds_vbt = 0;
+
+	/* SDVO panel data */
+	dev_priv->sdvo_lvds_vbt_mode = NULL;
+
+	/* general features */
+	dev_priv->int_tv_support = 1;
+	dev_priv->int_crt_support = 1;
+
+	/* Default to using SSC */
+	dev_priv->lvds_use_ssc = 1;
+	dev_priv->lvds_ssc_freq = intel_bios_ssc_frequency(dev, 1);
+	DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
+
+	/* eDP data */
+	dev_priv->edp.bpp = 18;
+}
+
+static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
+{
+	DRM_DEBUG_KMS("Falling back to manually reading VBT from "
+		      "VBIOS ROM for %s\n",
+		      id->ident);
+	return 1;
+}
+
+static const struct dmi_system_id intel_no_opregion_vbt[] = {
+	{
+		.callback = intel_no_opregion_vbt_callback,
+		.ident = "ThinkCentre A57",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "97027RG"),
+		},
+	},
+	{ }
+};
+
+/**
+ * intel_parse_bios - find VBT and initialize settings from the BIOS
+ * @dev: DRM device
+ *
+ * Loads the Video BIOS and checks that the VBT exists.  Sets scratch registers
+ * to appropriate values.
+ *
+ * Returns 0 on success, nonzero on failure.
+ */
+bool
+intel_parse_bios(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct pci_dev *pdev = dev->pdev;
+	struct bdb_header *bdb = NULL;
+	u8 __iomem *bios = NULL;
+
+	init_vbt_defaults(dev_priv);
+
+	/* XXX Should this validation be moved to intel_opregion.c? */
+	if (!dmi_check_system(intel_no_opregion_vbt) && dev_priv->opregion.vbt) {
+		struct vbt_header *vbt = dev_priv->opregion.vbt;
+		if (memcmp(vbt->signature, "$VBT", 4) == 0) {
+			DRM_DEBUG_KMS("Using VBT from OpRegion: %20s\n",
+					 vbt->signature);
+			bdb = (struct bdb_header *)((char *)vbt + vbt->bdb_offset);
+		} else
+			dev_priv->opregion.vbt = NULL;
+	}
+
+	if (bdb == NULL) {
+		struct vbt_header *vbt = NULL;
+		size_t size;
+		int i;
+
+		bios = pci_map_rom(pdev, &size);
+		if (!bios)
+			return -1;
+
+		/* Scour memory looking for the VBT signature */
+		for (i = 0; i + 4 < size; i++) {
+			if (!memcmp(bios + i, "$VBT", 4)) {
+				vbt = (struct vbt_header *)(bios + i);
+				break;
+			}
+		}
+
+		if (!vbt) {
+			DRM_DEBUG_DRIVER("VBT signature missing\n");
+			pci_unmap_rom(pdev, bios);
+			return -1;
+		}
+
+		bdb = (struct bdb_header *)(bios + i + vbt->bdb_offset);
+	}
+
+	/* Grab useful general definitions */
+	parse_general_features(dev_priv, bdb);
+	parse_general_definitions(dev_priv, bdb);
+	parse_lfp_panel_data(dev_priv, bdb);
+	parse_sdvo_panel_data(dev_priv, bdb);
+	parse_sdvo_device_mapping(dev_priv, bdb);
+	parse_device_mapping(dev_priv, bdb);
+	parse_driver_features(dev_priv, bdb);
+	parse_edp(dev_priv, bdb);
+
+	if (bios)
+		pci_unmap_rom(pdev, bios);
+
+	return 0;
+}
+
+/* Ensure that vital registers have been initialised, even if the BIOS
+ * is absent or just failing to do its job.
+ */
+void intel_setup_bios(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	 /* Set the Panel Power On/Off timings if uninitialized. */
+	if ((I915_READ(PP_ON_DELAYS) == 0) && (I915_READ(PP_OFF_DELAYS) == 0)) {
+		/* Set T2 to 40ms and T5 to 200ms */
+		I915_WRITE(PP_ON_DELAYS, 0x019007d0);
+
+		/* Set T3 to 35ms and Tx to 200ms */
+		I915_WRITE(PP_OFF_DELAYS, 0x015e07d0);
+	}
+}
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
new file mode 100644
index 00000000..dbda6e3b
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -0,0 +1,619 @@
+/*
+ * Copyright © 2006 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#ifndef _I830_BIOS_H_
+#define _I830_BIOS_H_
+
+#include "drmP.h"
+
+struct vbt_header {
+	u8 signature[20];		/**< Always starts with 'VBT$' */
+	u16 version;			/**< decimal */
+	u16 header_size;		/**< in bytes */
+	u16 vbt_size;			/**< in bytes */
+	u8 vbt_checksum;
+	u8 reserved0;
+	u32 bdb_offset;			/**< from beginning of VBT */
+	u32 aim_offset[4];		/**< from beginning of VBT */
+} __attribute__((packed));
+
+struct bdb_header {
+	u8 signature[16];		/**< Always 'BIOS_DATA_BLOCK' */
+	u16 version;			/**< decimal */
+	u16 header_size;		/**< in bytes */
+	u16 bdb_size;			/**< in bytes */
+};
+
+/* strictly speaking, this is a "skip" block, but it has interesting info */
+struct vbios_data {
+	u8 type; /* 0 == desktop, 1 == mobile */
+	u8 relstage;
+	u8 chipset;
+	u8 lvds_present:1;
+	u8 tv_present:1;
+	u8 rsvd2:6; /* finish byte */
+	u8 rsvd3[4];
+	u8 signon[155];
+	u8 copyright[61];
+	u16 code_segment;
+	u8 dos_boot_mode;
+	u8 bandwidth_percent;
+	u8 rsvd4; /* popup memory size */
+	u8 resize_pci_bios;
+	u8 rsvd5; /* is crt already on ddc2 */
+} __attribute__((packed));
+
+/*
+ * There are several types of BIOS data blocks (BDBs), each block has
+ * an ID and size in the first 3 bytes (ID in first, size in next 2).
+ * Known types are listed below.
+ */
+#define BDB_GENERAL_FEATURES	  1
+#define BDB_GENERAL_DEFINITIONS	  2
+#define BDB_OLD_TOGGLE_LIST	  3
+#define BDB_MODE_SUPPORT_LIST	  4
+#define BDB_GENERIC_MODE_TABLE	  5
+#define BDB_EXT_MMIO_REGS	  6
+#define BDB_SWF_IO		  7
+#define BDB_SWF_MMIO		  8
+#define BDB_DOT_CLOCK_TABLE	  9
+#define BDB_MODE_REMOVAL_TABLE	 10
+#define BDB_CHILD_DEVICE_TABLE	 11
+#define BDB_DRIVER_FEATURES	 12
+#define BDB_DRIVER_PERSISTENCE	 13
+#define BDB_EXT_TABLE_PTRS	 14
+#define BDB_DOT_CLOCK_OVERRIDE	 15
+#define BDB_DISPLAY_SELECT	 16
+/* 17 rsvd */
+#define BDB_DRIVER_ROTATION	 18
+#define BDB_DISPLAY_REMOVE	 19
+#define BDB_OEM_CUSTOM		 20
+#define BDB_EFP_LIST		 21 /* workarounds for VGA hsync/vsync */
+#define BDB_SDVO_LVDS_OPTIONS	 22
+#define BDB_SDVO_PANEL_DTDS	 23
+#define BDB_SDVO_LVDS_PNP_IDS	 24
+#define BDB_SDVO_LVDS_POWER_SEQ	 25
+#define BDB_TV_OPTIONS		 26
+#define BDB_EDP			 27
+#define BDB_LVDS_OPTIONS	 40
+#define BDB_LVDS_LFP_DATA_PTRS	 41
+#define BDB_LVDS_LFP_DATA	 42
+#define BDB_LVDS_BACKLIGHT	 43
+#define BDB_LVDS_POWER		 44
+#define BDB_SKIP		254 /* VBIOS private block, ignore */
+
+struct bdb_general_features {
+        /* bits 1 */
+	u8 panel_fitting:2;
+	u8 flexaim:1;
+	u8 msg_enable:1;
+	u8 clear_screen:3;
+	u8 color_flip:1;
+
+        /* bits 2 */
+	u8 download_ext_vbt:1;
+	u8 enable_ssc:1;
+	u8 ssc_freq:1;
+	u8 enable_lfp_on_override:1;
+	u8 disable_ssc_ddt:1;
+	u8 rsvd7:1;
+	u8 display_clock_mode:1;
+	u8 rsvd8:1; /* finish byte */
+
+        /* bits 3 */
+	u8 disable_smooth_vision:1;
+	u8 single_dvi:1;
+	u8 rsvd9:6; /* finish byte */
+
+        /* bits 4 */
+	u8 legacy_monitor_detect;
+
+        /* bits 5 */
+	u8 int_crt_support:1;
+	u8 int_tv_support:1;
+	u8 int_efp_support:1;
+	u8 dp_ssc_enb:1;	/* PCH attached eDP supports SSC */
+	u8 dp_ssc_freq:1;	/* SSC freq for PCH attached eDP */
+	u8 rsvd11:3; /* finish byte */
+} __attribute__((packed));
+
+/* pre-915 */
+#define GPIO_PIN_DVI_LVDS	0x03 /* "DVI/LVDS DDC GPIO pins" */
+#define GPIO_PIN_ADD_I2C	0x05 /* "ADDCARD I2C GPIO pins" */
+#define GPIO_PIN_ADD_DDC	0x04 /* "ADDCARD DDC GPIO pins" */
+#define GPIO_PIN_ADD_DDC_I2C	0x06 /* "ADDCARD DDC/I2C GPIO pins" */
+
+/* Pre 915 */
+#define DEVICE_TYPE_NONE	0x00
+#define DEVICE_TYPE_CRT		0x01
+#define DEVICE_TYPE_TV		0x09
+#define DEVICE_TYPE_EFP		0x12
+#define DEVICE_TYPE_LFP		0x22
+/* On 915+ */
+#define DEVICE_TYPE_CRT_DPMS		0x6001
+#define DEVICE_TYPE_CRT_DPMS_HOTPLUG	0x4001
+#define DEVICE_TYPE_TV_COMPOSITE	0x0209
+#define DEVICE_TYPE_TV_MACROVISION	0x0289
+#define DEVICE_TYPE_TV_RF_COMPOSITE	0x020c
+#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE	0x0609
+#define DEVICE_TYPE_TV_SCART		0x0209
+#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009
+#define DEVICE_TYPE_EFP_HOTPLUG_PWR	0x6012
+#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR	0x6052
+#define DEVICE_TYPE_EFP_DVI_I		0x6053
+#define DEVICE_TYPE_EFP_DVI_D_DUAL	0x6152
+#define DEVICE_TYPE_EFP_DVI_D_HDCP	0x60d2
+#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR	0x6062
+#define DEVICE_TYPE_OPENLDI_DUALPIX	0x6162
+#define DEVICE_TYPE_LFP_PANELLINK	0x5012
+#define DEVICE_TYPE_LFP_CMOS_PWR	0x5042
+#define DEVICE_TYPE_LFP_LVDS_PWR	0x5062
+#define DEVICE_TYPE_LFP_LVDS_DUAL	0x5162
+#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP	0x51e2
+
+#define DEVICE_CFG_NONE		0x00
+#define DEVICE_CFG_12BIT_DVOB	0x01
+#define DEVICE_CFG_12BIT_DVOC	0x02
+#define DEVICE_CFG_24BIT_DVOBC	0x09
+#define DEVICE_CFG_24BIT_DVOCB	0x0a
+#define DEVICE_CFG_DUAL_DVOB	0x11
+#define DEVICE_CFG_DUAL_DVOC	0x12
+#define DEVICE_CFG_DUAL_DVOBC	0x13
+#define DEVICE_CFG_DUAL_LINK_DVOBC	0x19
+#define DEVICE_CFG_DUAL_LINK_DVOCB	0x1a
+
+#define DEVICE_WIRE_NONE	0x00
+#define DEVICE_WIRE_DVOB	0x01
+#define DEVICE_WIRE_DVOC	0x02
+#define DEVICE_WIRE_DVOBC	0x03
+#define DEVICE_WIRE_DVOBB	0x05
+#define DEVICE_WIRE_DVOCC	0x06
+#define DEVICE_WIRE_DVOB_MASTER 0x0d
+#define DEVICE_WIRE_DVOC_MASTER 0x0e
+
+#define DEVICE_PORT_DVOA	0x00 /* none on 845+ */
+#define DEVICE_PORT_DVOB	0x01
+#define DEVICE_PORT_DVOC	0x02
+
+struct child_device_config {
+	u16 handle;
+	u16 device_type;
+	u8  device_id[10]; /* ascii string */
+	u16 addin_offset;
+	u8  dvo_port; /* See Device_PORT_* above */
+	u8  i2c_pin;
+	u8  slave_addr;
+	u8  ddc_pin;
+	u16 edid_ptr;
+	u8  dvo_cfg; /* See DEVICE_CFG_* above */
+	u8  dvo2_port;
+	u8  i2c2_pin;
+	u8  slave2_addr;
+	u8  ddc2_pin;
+	u8  capabilities;
+	u8  dvo_wiring;/* See DEVICE_WIRE_* above */
+	u8  dvo2_wiring;
+	u16 extended_type;
+	u8  dvo_function;
+} __attribute__((packed));
+
+struct bdb_general_definitions {
+	/* DDC GPIO */
+	u8 crt_ddc_gmbus_pin;
+
+	/* DPMS bits */
+	u8 dpms_acpi:1;
+	u8 skip_boot_crt_detect:1;
+	u8 dpms_aim:1;
+	u8 rsvd1:5; /* finish byte */
+
+	/* boot device bits */
+	u8 boot_display[2];
+	u8 child_dev_size;
+
+	/*
+	 * Device info:
+	 * If TV is present, it'll be at devices[0].
+	 * LVDS will be next, either devices[0] or [1], if present.
+	 * On some platforms the number of device is 6. But could be as few as
+	 * 4 if both TV and LVDS are missing.
+	 * And the device num is related with the size of general definition
+	 * block. It is obtained by using the following formula:
+	 * number = (block_size - sizeof(bdb_general_definitions))/
+	 *	     sizeof(child_device_config);
+	 */
+	struct child_device_config devices[0];
+} __attribute__((packed));
+
+struct bdb_lvds_options {
+	u8 panel_type;
+	u8 rsvd1;
+	/* LVDS capabilities, stored in a dword */
+	u8 pfit_mode:2;
+	u8 pfit_text_mode_enhanced:1;
+	u8 pfit_gfx_mode_enhanced:1;
+	u8 pfit_ratio_auto:1;
+	u8 pixel_dither:1;
+	u8 lvds_edid:1;
+	u8 rsvd2:1;
+	u8 rsvd4;
+} __attribute__((packed));
+
+/* LFP pointer table contains entries to the struct below */
+struct bdb_lvds_lfp_data_ptr {
+	u16 fp_timing_offset; /* offsets are from start of bdb */
+	u8 fp_table_size;
+	u16 dvo_timing_offset;
+	u8 dvo_table_size;
+	u16 panel_pnp_id_offset;
+	u8 pnp_table_size;
+} __attribute__((packed));
+
+struct bdb_lvds_lfp_data_ptrs {
+	u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */
+	struct bdb_lvds_lfp_data_ptr ptr[16];
+} __attribute__((packed));
+
+/* LFP data has 3 blocks per entry */
+struct lvds_fp_timing {
+	u16 x_res;
+	u16 y_res;
+	u32 lvds_reg;
+	u32 lvds_reg_val;
+	u32 pp_on_reg;
+	u32 pp_on_reg_val;
+	u32 pp_off_reg;
+	u32 pp_off_reg_val;
+	u32 pp_cycle_reg;
+	u32 pp_cycle_reg_val;
+	u32 pfit_reg;
+	u32 pfit_reg_val;
+	u16 terminator;
+} __attribute__((packed));
+
+struct lvds_dvo_timing {
+	u16 clock;		/**< In 10khz */
+	u8 hactive_lo;
+	u8 hblank_lo;
+	u8 hblank_hi:4;
+	u8 hactive_hi:4;
+	u8 vactive_lo;
+	u8 vblank_lo;
+	u8 vblank_hi:4;
+	u8 vactive_hi:4;
+	u8 hsync_off_lo;
+	u8 hsync_pulse_width;
+	u8 vsync_pulse_width:4;
+	u8 vsync_off:4;
+	u8 rsvd0:6;
+	u8 hsync_off_hi:2;
+	u8 h_image;
+	u8 v_image;
+	u8 max_hv;
+	u8 h_border;
+	u8 v_border;
+	u8 rsvd1:3;
+	u8 digital:2;
+	u8 vsync_positive:1;
+	u8 hsync_positive:1;
+	u8 rsvd2:1;
+} __attribute__((packed));
+
+struct lvds_pnp_id {
+	u16 mfg_name;
+	u16 product_code;
+	u32 serial;
+	u8 mfg_week;
+	u8 mfg_year;
+} __attribute__((packed));
+
+struct bdb_lvds_lfp_data_entry {
+	struct lvds_fp_timing fp_timing;
+	struct lvds_dvo_timing dvo_timing;
+	struct lvds_pnp_id pnp_id;
+} __attribute__((packed));
+
+struct bdb_lvds_lfp_data {
+	struct bdb_lvds_lfp_data_entry data[16];
+} __attribute__((packed));
+
+struct aimdb_header {
+	char signature[16];
+	char oem_device[20];
+	u16 aimdb_version;
+	u16 aimdb_header_size;
+	u16 aimdb_size;
+} __attribute__((packed));
+
+struct aimdb_block {
+	u8 aimdb_id;
+	u16 aimdb_size;
+} __attribute__((packed));
+
+struct vch_panel_data {
+	u16 fp_timing_offset;
+	u8 fp_timing_size;
+	u16 dvo_timing_offset;
+	u8 dvo_timing_size;
+	u16 text_fitting_offset;
+	u8 text_fitting_size;
+	u16 graphics_fitting_offset;
+	u8 graphics_fitting_size;
+} __attribute__((packed));
+
+struct vch_bdb_22 {
+	struct aimdb_block aimdb_block;
+	struct vch_panel_data panels[16];
+} __attribute__((packed));
+
+struct bdb_sdvo_lvds_options {
+	u8 panel_backlight;
+	u8 h40_set_panel_type;
+	u8 panel_type;
+	u8 ssc_clk_freq;
+	u16 als_low_trip;
+	u16 als_high_trip;
+	u8 sclalarcoeff_tab_row_num;
+	u8 sclalarcoeff_tab_row_size;
+	u8 coefficient[8];
+	u8 panel_misc_bits_1;
+	u8 panel_misc_bits_2;
+	u8 panel_misc_bits_3;
+	u8 panel_misc_bits_4;
+} __attribute__((packed));
+
+
+#define BDB_DRIVER_FEATURE_NO_LVDS		0
+#define BDB_DRIVER_FEATURE_INT_LVDS		1
+#define BDB_DRIVER_FEATURE_SDVO_LVDS		2
+#define BDB_DRIVER_FEATURE_EDP			3
+
+struct bdb_driver_features {
+	u8 boot_dev_algorithm:1;
+	u8 block_display_switch:1;
+	u8 allow_display_switch:1;
+	u8 hotplug_dvo:1;
+	u8 dual_view_zoom:1;
+	u8 int15h_hook:1;
+	u8 sprite_in_clone:1;
+	u8 primary_lfp_id:1;
+
+	u16 boot_mode_x;
+	u16 boot_mode_y;
+	u8 boot_mode_bpp;
+	u8 boot_mode_refresh;
+
+	u16 enable_lfp_primary:1;
+	u16 selective_mode_pruning:1;
+	u16 dual_frequency:1;
+	u16 render_clock_freq:1; /* 0: high freq; 1: low freq */
+	u16 nt_clone_support:1;
+	u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */
+	u16 sprite_display_assign:1; /* 0: secondary; 1: primary */
+	u16 cui_aspect_scaling:1;
+	u16 preserve_aspect_ratio:1;
+	u16 sdvo_device_power_down:1;
+	u16 crt_hotplug:1;
+	u16 lvds_config:2;
+	u16 tv_hotplug:1;
+	u16 hdmi_config:2;
+
+	u8 static_display:1;
+	u8 reserved2:7;
+	u16 legacy_crt_max_x;
+	u16 legacy_crt_max_y;
+	u8 legacy_crt_max_refresh;
+
+	u8 hdmi_termination;
+	u8 custom_vbt_version;
+} __attribute__((packed));
+
+#define EDP_18BPP	0
+#define EDP_24BPP	1
+#define EDP_30BPP	2
+#define EDP_RATE_1_62	0
+#define EDP_RATE_2_7	1
+#define EDP_LANE_1	0
+#define EDP_LANE_2	1
+#define EDP_LANE_4	3
+#define EDP_PREEMPHASIS_NONE	0
+#define EDP_PREEMPHASIS_3_5dB	1
+#define EDP_PREEMPHASIS_6dB	2
+#define EDP_PREEMPHASIS_9_5dB	3
+#define EDP_VSWING_0_4V		0
+#define EDP_VSWING_0_6V		1
+#define EDP_VSWING_0_8V		2
+#define EDP_VSWING_1_2V		3
+
+struct edp_power_seq {
+	u16 t1_t3;
+	u16 t8;
+	u16 t9;
+	u16 t10;
+	u16 t11_t12;
+} __attribute__ ((packed));
+
+struct edp_link_params {
+	u8 rate:4;
+	u8 lanes:4;
+	u8 preemphasis:4;
+	u8 vswing:4;
+} __attribute__ ((packed));
+
+struct bdb_edp {
+	struct edp_power_seq power_seqs[16];
+	u32 color_depth;
+	struct edp_link_params link_params[16];
+	u32 sdrrs_msa_timing_delay;
+
+	/* ith bit indicates enabled/disabled for (i+1)th panel */
+	u16 edp_s3d_feature;
+	u16 edp_t3_optimization;
+} __attribute__ ((packed));
+
+void intel_setup_bios(struct drm_device *dev);
+bool intel_parse_bios(struct drm_device *dev);
+
+/*
+ * Driver<->VBIOS interaction occurs through scratch bits in
+ * GR18 & SWF*.
+ */
+
+/* GR18 bits are set on display switch and hotkey events */
+#define GR18_DRIVER_SWITCH_EN	(1<<7) /* 0: VBIOS control, 1: driver control */
+#define GR18_HOTKEY_MASK	0x78 /* See also SWF4 15:0 */
+#define   GR18_HK_NONE		(0x0<<3)
+#define   GR18_HK_LFP_STRETCH	(0x1<<3)
+#define   GR18_HK_TOGGLE_DISP	(0x2<<3)
+#define   GR18_HK_DISP_SWITCH	(0x4<<3) /* see SWF14 15:0 for what to enable */
+#define   GR18_HK_POPUP_DISABLED (0x6<<3)
+#define   GR18_HK_POPUP_ENABLED	(0x7<<3)
+#define   GR18_HK_PFIT		(0x8<<3)
+#define   GR18_HK_APM_CHANGE	(0xa<<3)
+#define   GR18_HK_MULTIPLE	(0xc<<3)
+#define GR18_USER_INT_EN	(1<<2)
+#define GR18_A0000_FLUSH_EN	(1<<1)
+#define GR18_SMM_EN		(1<<0)
+
+/* Set by driver, cleared by VBIOS */
+#define SWF00_YRES_SHIFT	16
+#define SWF00_XRES_SHIFT	0
+#define SWF00_RES_MASK		0xffff
+
+/* Set by VBIOS at boot time and driver at runtime */
+#define SWF01_TV2_FORMAT_SHIFT	8
+#define SWF01_TV1_FORMAT_SHIFT	0
+#define SWF01_TV_FORMAT_MASK	0xffff
+
+#define SWF10_VBIOS_BLC_I2C_EN	(1<<29)
+#define SWF10_GTT_OVERRIDE_EN	(1<<28)
+#define SWF10_LFP_DPMS_OVR	(1<<27) /* override DPMS on display switch */
+#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
+#define   SWF10_OLD_TOGGLE	0x0
+#define   SWF10_TOGGLE_LIST_1	0x1
+#define   SWF10_TOGGLE_LIST_2	0x2
+#define   SWF10_TOGGLE_LIST_3	0x3
+#define   SWF10_TOGGLE_LIST_4	0x4
+#define SWF10_PANNING_EN	(1<<23)
+#define SWF10_DRIVER_LOADED	(1<<22)
+#define SWF10_EXTENDED_DESKTOP	(1<<21)
+#define SWF10_EXCLUSIVE_MODE	(1<<20)
+#define SWF10_OVERLAY_EN	(1<<19)
+#define SWF10_PLANEB_HOLDOFF	(1<<18)
+#define SWF10_PLANEA_HOLDOFF	(1<<17)
+#define SWF10_VGA_HOLDOFF	(1<<16)
+#define SWF10_ACTIVE_DISP_MASK	0xffff
+#define   SWF10_PIPEB_LFP2	(1<<15)
+#define   SWF10_PIPEB_EFP2	(1<<14)
+#define   SWF10_PIPEB_TV2	(1<<13)
+#define   SWF10_PIPEB_CRT2	(1<<12)
+#define   SWF10_PIPEB_LFP	(1<<11)
+#define   SWF10_PIPEB_EFP	(1<<10)
+#define   SWF10_PIPEB_TV	(1<<9)
+#define   SWF10_PIPEB_CRT	(1<<8)
+#define   SWF10_PIPEA_LFP2	(1<<7)
+#define   SWF10_PIPEA_EFP2	(1<<6)
+#define   SWF10_PIPEA_TV2	(1<<5)
+#define   SWF10_PIPEA_CRT2	(1<<4)
+#define   SWF10_PIPEA_LFP	(1<<3)
+#define   SWF10_PIPEA_EFP	(1<<2)
+#define   SWF10_PIPEA_TV	(1<<1)
+#define   SWF10_PIPEA_CRT	(1<<0)
+
+#define SWF11_MEMORY_SIZE_SHIFT	16
+#define SWF11_SV_TEST_EN	(1<<15)
+#define SWF11_IS_AGP		(1<<14)
+#define SWF11_DISPLAY_HOLDOFF	(1<<13)
+#define SWF11_DPMS_REDUCED	(1<<12)
+#define SWF11_IS_VBE_MODE	(1<<11)
+#define SWF11_PIPEB_ACCESS	(1<<10) /* 0 here means pipe a */
+#define SWF11_DPMS_MASK		0x07
+#define   SWF11_DPMS_OFF	(1<<2)
+#define   SWF11_DPMS_SUSPEND	(1<<1)
+#define   SWF11_DPMS_STANDBY	(1<<0)
+#define   SWF11_DPMS_ON		0
+
+#define SWF14_GFX_PFIT_EN	(1<<31)
+#define SWF14_TEXT_PFIT_EN	(1<<30)
+#define SWF14_LID_STATUS_CLOSED	(1<<29) /* 0 here means open */
+#define SWF14_POPUP_EN		(1<<28)
+#define SWF14_DISPLAY_HOLDOFF	(1<<27)
+#define SWF14_DISP_DETECT_EN	(1<<26)
+#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
+#define SWF14_DRIVER_STATUS	(1<<24)
+#define SWF14_OS_TYPE_WIN9X	(1<<23)
+#define SWF14_OS_TYPE_WINNT	(1<<22)
+/* 21:19 rsvd */
+#define SWF14_PM_TYPE_MASK	0x00070000
+#define   SWF14_PM_ACPI_VIDEO	(0x4 << 16)
+#define   SWF14_PM_ACPI		(0x3 << 16)
+#define   SWF14_PM_APM_12	(0x2 << 16)
+#define   SWF14_PM_APM_11	(0x1 << 16)
+#define SWF14_HK_REQUEST_MASK	0x0000ffff /* see GR18 6:3 for event type */
+          /* if GR18 indicates a display switch */
+#define   SWF14_DS_PIPEB_LFP2_EN (1<<15)
+#define   SWF14_DS_PIPEB_EFP2_EN (1<<14)
+#define   SWF14_DS_PIPEB_TV2_EN  (1<<13)
+#define   SWF14_DS_PIPEB_CRT2_EN (1<<12)
+#define   SWF14_DS_PIPEB_LFP_EN  (1<<11)
+#define   SWF14_DS_PIPEB_EFP_EN  (1<<10)
+#define   SWF14_DS_PIPEB_TV_EN   (1<<9)
+#define   SWF14_DS_PIPEB_CRT_EN  (1<<8)
+#define   SWF14_DS_PIPEA_LFP2_EN (1<<7)
+#define   SWF14_DS_PIPEA_EFP2_EN (1<<6)
+#define   SWF14_DS_PIPEA_TV2_EN  (1<<5)
+#define   SWF14_DS_PIPEA_CRT2_EN (1<<4)
+#define   SWF14_DS_PIPEA_LFP_EN  (1<<3)
+#define   SWF14_DS_PIPEA_EFP_EN  (1<<2)
+#define   SWF14_DS_PIPEA_TV_EN   (1<<1)
+#define   SWF14_DS_PIPEA_CRT_EN  (1<<0)
+          /* if GR18 indicates a panel fitting request */
+#define   SWF14_PFIT_EN		(1<<0) /* 0 means disable */
+          /* if GR18 indicates an APM change request */
+#define   SWF14_APM_HIBERNATE	0x4
+#define   SWF14_APM_SUSPEND	0x3
+#define   SWF14_APM_STANDBY	0x1
+#define   SWF14_APM_RESTORE	0x0
+
+/* Add the device class for LFP, TV, HDMI */
+#define	 DEVICE_TYPE_INT_LFP	0x1022
+#define	 DEVICE_TYPE_INT_TV	0x1009
+#define	 DEVICE_TYPE_HDMI	0x60D2
+#define	 DEVICE_TYPE_DP		0x68C6
+#define	 DEVICE_TYPE_eDP	0x78C6
+
+/* define the DVO port for HDMI output type */
+#define		DVO_B		1
+#define		DVO_C		2
+#define		DVO_D		3
+
+/* define the PORT for DP output type */
+#define		PORT_IDPB	7
+#define		PORT_IDPC	8
+#define		PORT_IDPD	9
+
+#endif /* _I830_BIOS_H_ */
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
new file mode 100644
index 00000000..90b9793f
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -0,0 +1,624 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "drm_edid.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+/* Here's the desired hotplug mode */
+#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 |		\
+			   ADPA_CRT_HOTPLUG_WARMUP_10MS |		\
+			   ADPA_CRT_HOTPLUG_SAMPLE_4S |			\
+			   ADPA_CRT_HOTPLUG_VOLTAGE_50 |		\
+			   ADPA_CRT_HOTPLUG_VOLREF_325MV |		\
+			   ADPA_CRT_HOTPLUG_ENABLE)
+
+struct intel_crt {
+	struct intel_encoder base;
+	bool force_hotplug_required;
+};
+
+static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
+{
+	return container_of(intel_attached_encoder(connector),
+			    struct intel_crt, base);
+}
+
+static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 temp, reg;
+
+	if (HAS_PCH_SPLIT(dev))
+		reg = PCH_ADPA;
+	else
+		reg = ADPA;
+
+	temp = I915_READ(reg);
+	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
+	temp &= ~ADPA_DAC_ENABLE;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		temp |= ADPA_DAC_ENABLE;
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_OFF:
+		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	}
+
+	I915_WRITE(reg, temp);
+}
+
+static int intel_crt_mode_valid(struct drm_connector *connector,
+				struct drm_display_mode *mode)
+{
+	struct drm_device *dev = connector->dev;
+
+	int max_clock = 0;
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	if (mode->clock < 25000)
+		return MODE_CLOCK_LOW;
+
+	if (IS_GEN2(dev))
+		max_clock = 350000;
+	else
+		max_clock = 400000;
+	if (mode->clock > max_clock)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
+				 struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static void intel_crt_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int dpll_md_reg;
+	u32 adpa, dpll_md;
+	u32 adpa_reg;
+
+	dpll_md_reg = DPLL_MD(intel_crtc->pipe);
+
+	if (HAS_PCH_SPLIT(dev))
+		adpa_reg = PCH_ADPA;
+	else
+		adpa_reg = ADPA;
+
+	/*
+	 * Disable separate mode multiplier used when cloning SDVO to CRT
+	 * XXX this needs to be adjusted when we really are cloning
+	 */
+	if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
+		dpll_md = I915_READ(dpll_md_reg);
+		I915_WRITE(dpll_md_reg,
+			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
+	}
+
+	adpa = ADPA_HOTPLUG_BITS;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
+
+	/* For CPT allow 3 pipe config, for others just use A or B */
+	if (HAS_PCH_CPT(dev))
+		adpa |= PORT_TRANS_SEL_CPT(intel_crtc->pipe);
+	else if (intel_crtc->pipe == 0)
+		adpa |= ADPA_PIPE_A_SELECT;
+	else
+		adpa |= ADPA_PIPE_B_SELECT;
+
+	if (!HAS_PCH_SPLIT(dev))
+		I915_WRITE(BCLRPAT(intel_crtc->pipe), 0);
+
+	I915_WRITE(adpa_reg, adpa);
+}
+
+static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 adpa;
+	bool ret;
+
+	/* The first time through, trigger an explicit detection cycle */
+	if (crt->force_hotplug_required) {
+		bool turn_off_dac = HAS_PCH_SPLIT(dev);
+		u32 save_adpa;
+
+		crt->force_hotplug_required = 0;
+
+		save_adpa = adpa = I915_READ(PCH_ADPA);
+		DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
+
+		adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
+		if (turn_off_dac)
+			adpa &= ~ADPA_DAC_ENABLE;
+
+		I915_WRITE(PCH_ADPA, adpa);
+
+		if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
+			     1000))
+			DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
+
+		if (turn_off_dac) {
+			I915_WRITE(PCH_ADPA, save_adpa);
+			POSTING_READ(PCH_ADPA);
+		}
+	}
+
+	/* Check the status to see if both blue and green are on now */
+	adpa = I915_READ(PCH_ADPA);
+	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
+		ret = true;
+	else
+		ret = false;
+	DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
+
+	return ret;
+}
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
+ *
+ * Not for i915G/i915GM
+ *
+ * \return true if CRT is connected.
+ * \return false if CRT is disconnected.
+ */
+static bool intel_crt_detect_hotplug(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 hotplug_en, orig, stat;
+	bool ret = false;
+	int i, tries = 0;
+
+	if (HAS_PCH_SPLIT(dev))
+		return intel_ironlake_crt_detect_hotplug(connector);
+
+	/*
+	 * On 4 series desktop, CRT detect sequence need to be done twice
+	 * to get a reliable result.
+	 */
+
+	if (IS_G4X(dev) && !IS_GM45(dev))
+		tries = 2;
+	else
+		tries = 1;
+	hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
+	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
+
+	for (i = 0; i < tries ; i++) {
+		/* turn on the FORCE_DETECT */
+		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+		/* wait for FORCE_DETECT to go off */
+		if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
+			      CRT_HOTPLUG_FORCE_DETECT) == 0,
+			     1000))
+			DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
+	}
+
+	stat = I915_READ(PORT_HOTPLUG_STAT);
+	if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
+		ret = true;
+
+	/* clear the interrupt we just generated, if any */
+	I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
+
+	/* and put the bits back */
+	I915_WRITE(PORT_HOTPLUG_EN, orig);
+
+	return ret;
+}
+
+static bool intel_crt_detect_ddc(struct drm_connector *connector)
+{
+	struct intel_crt *crt = intel_attached_crt(connector);
+	struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
+
+	/* CRT should always be at 0, but check anyway */
+	if (crt->base.type != INTEL_OUTPUT_ANALOG)
+		return false;
+
+	if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
+		struct edid *edid;
+		bool is_digital = false;
+
+		edid = drm_get_edid(connector,
+			&dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+		/*
+		 * This may be a DVI-I connector with a shared DDC
+		 * link between analog and digital outputs, so we
+		 * have to check the EDID input spec of the attached device.
+		 *
+		 * On the other hand, what should we do if it is a broken EDID?
+		 */
+		if (edid != NULL) {
+			is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
+			connector->display_info.raw_edid = NULL;
+			kfree(edid);
+		}
+
+		if (!is_digital) {
+			DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
+			return true;
+		} else {
+			DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
+		}
+	}
+
+	return false;
+}
+
+static enum drm_connector_status
+intel_crt_load_detect(struct intel_crt *crt)
+{
+	struct drm_device *dev = crt->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t pipe = to_intel_crtc(crt->base.base.crtc)->pipe;
+	uint32_t save_bclrpat;
+	uint32_t save_vtotal;
+	uint32_t vtotal, vactive;
+	uint32_t vsample;
+	uint32_t vblank, vblank_start, vblank_end;
+	uint32_t dsl;
+	uint32_t bclrpat_reg;
+	uint32_t vtotal_reg;
+	uint32_t vblank_reg;
+	uint32_t vsync_reg;
+	uint32_t pipeconf_reg;
+	uint32_t pipe_dsl_reg;
+	uint8_t	st00;
+	enum drm_connector_status status;
+
+	DRM_DEBUG_KMS("starting load-detect on CRT\n");
+
+	bclrpat_reg = BCLRPAT(pipe);
+	vtotal_reg = VTOTAL(pipe);
+	vblank_reg = VBLANK(pipe);
+	vsync_reg = VSYNC(pipe);
+	pipeconf_reg = PIPECONF(pipe);
+	pipe_dsl_reg = PIPEDSL(pipe);
+
+	save_bclrpat = I915_READ(bclrpat_reg);
+	save_vtotal = I915_READ(vtotal_reg);
+	vblank = I915_READ(vblank_reg);
+
+	vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
+	vactive = (save_vtotal & 0x7ff) + 1;
+
+	vblank_start = (vblank & 0xfff) + 1;
+	vblank_end = ((vblank >> 16) & 0xfff) + 1;
+
+	/* Set the border color to purple. */
+	I915_WRITE(bclrpat_reg, 0x500050);
+
+	if (!IS_GEN2(dev)) {
+		uint32_t pipeconf = I915_READ(pipeconf_reg);
+		I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
+		POSTING_READ(pipeconf_reg);
+		/* Wait for next Vblank to substitue
+		 * border color for Color info */
+		intel_wait_for_vblank(dev, pipe);
+		st00 = I915_READ8(VGA_MSR_WRITE);
+		status = ((st00 & (1 << 4)) != 0) ?
+			connector_status_connected :
+			connector_status_disconnected;
+
+		I915_WRITE(pipeconf_reg, pipeconf);
+	} else {
+		bool restore_vblank = false;
+		int count, detect;
+
+		/*
+		* If there isn't any border, add some.
+		* Yes, this will flicker
+		*/
+		if (vblank_start <= vactive && vblank_end >= vtotal) {
+			uint32_t vsync = I915_READ(vsync_reg);
+			uint32_t vsync_start = (vsync & 0xffff) + 1;
+
+			vblank_start = vsync_start;
+			I915_WRITE(vblank_reg,
+				   (vblank_start - 1) |
+				   ((vblank_end - 1) << 16));
+			restore_vblank = true;
+		}
+		/* sample in the vertical border, selecting the larger one */
+		if (vblank_start - vactive >= vtotal - vblank_end)
+			vsample = (vblank_start + vactive) >> 1;
+		else
+			vsample = (vtotal + vblank_end) >> 1;
+
+		/*
+		 * Wait for the border to be displayed
+		 */
+		while (I915_READ(pipe_dsl_reg) >= vactive)
+			;
+		while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
+			;
+		/*
+		 * Watch ST00 for an entire scanline
+		 */
+		detect = 0;
+		count = 0;
+		do {
+			count++;
+			/* Read the ST00 VGA status register */
+			st00 = I915_READ8(VGA_MSR_WRITE);
+			if (st00 & (1 << 4))
+				detect++;
+		} while ((I915_READ(pipe_dsl_reg) == dsl));
+
+		/* restore vblank if necessary */
+		if (restore_vblank)
+			I915_WRITE(vblank_reg, vblank);
+		/*
+		 * If more than 3/4 of the scanline detected a monitor,
+		 * then it is assumed to be present. This works even on i830,
+		 * where there isn't any way to force the border color across
+		 * the screen
+		 */
+		status = detect * 4 > count * 3 ?
+			 connector_status_connected :
+			 connector_status_disconnected;
+	}
+
+	/* Restore previous settings */
+	I915_WRITE(bclrpat_reg, save_bclrpat);
+
+	return status;
+}
+
+static enum drm_connector_status
+intel_crt_detect(struct drm_connector *connector, bool force)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
+	enum drm_connector_status status;
+	struct intel_load_detect_pipe tmp;
+
+	if (I915_HAS_HOTPLUG(dev)) {
+		if (intel_crt_detect_hotplug(connector)) {
+			DRM_DEBUG_KMS("CRT detected via hotplug\n");
+			return connector_status_connected;
+		} else {
+			DRM_DEBUG_KMS("CRT not detected via hotplug\n");
+			return connector_status_disconnected;
+		}
+	}
+
+	if (intel_crt_detect_ddc(connector))
+		return connector_status_connected;
+
+	if (!force)
+		return connector->status;
+
+	/* for pre-945g platforms use load detect */
+	if (intel_get_load_detect_pipe(&crt->base, connector, NULL,
+				       &tmp)) {
+		if (intel_crt_detect_ddc(connector))
+			status = connector_status_connected;
+		else
+			status = intel_crt_load_detect(crt);
+		intel_release_load_detect_pipe(&crt->base, connector,
+					       &tmp);
+	} else
+		status = connector_status_unknown;
+
+	return status;
+}
+
+static void intel_crt_destroy(struct drm_connector *connector)
+{
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static int intel_crt_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = intel_ddc_get_modes(connector,
+				 &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+	if (ret || !IS_G4X(dev))
+		return ret;
+
+	/* Try to probe digital port for output in DVI-I -> VGA mode. */
+	return intel_ddc_get_modes(connector,
+				   &dev_priv->gmbus[GMBUS_PORT_DPB].adapter);
+}
+
+static int intel_crt_set_property(struct drm_connector *connector,
+				  struct drm_property *property,
+				  uint64_t value)
+{
+	return 0;
+}
+
+static void intel_crt_reset(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
+
+	if (HAS_PCH_SPLIT(dev))
+		crt->force_hotplug_required = 1;
+}
+
+/*
+ * Routines for controlling stuff on the analog port
+ */
+
+static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = {
+	.dpms = intel_crt_dpms,
+	.mode_fixup = intel_crt_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.commit = intel_encoder_commit,
+	.mode_set = intel_crt_mode_set,
+};
+
+static const struct drm_connector_funcs intel_crt_connector_funcs = {
+	.reset = intel_crt_reset,
+	.dpms = drm_helper_connector_dpms,
+	.detect = intel_crt_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = intel_crt_destroy,
+	.set_property = intel_crt_set_property,
+};
+
+static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
+	.mode_valid = intel_crt_mode_valid,
+	.get_modes = intel_crt_get_modes,
+	.best_encoder = intel_best_encoder,
+};
+
+static const struct drm_encoder_funcs intel_crt_enc_funcs = {
+	.destroy = intel_encoder_destroy,
+};
+
+static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident);
+	return 1;
+}
+
+static const struct dmi_system_id intel_no_crt[] = {
+	{
+		.callback = intel_no_crt_dmi_callback,
+		.ident = "ACER ZGB",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
+		},
+	},
+	{ }
+};
+
+void intel_crt_init(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+	struct intel_crt *crt;
+	struct intel_connector *intel_connector;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* Skip machines without VGA that falsely report hotplug events */
+	if (dmi_check_system(intel_no_crt))
+		return;
+
+	crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
+	if (!crt)
+		return;
+
+	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
+	if (!intel_connector) {
+		kfree(crt);
+		return;
+	}
+
+	connector = &intel_connector->base;
+	drm_connector_init(dev, &intel_connector->base,
+			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
+
+	drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
+			 DRM_MODE_ENCODER_DAC);
+
+	intel_connector_attach_encoder(intel_connector, &crt->base);
+
+	crt->base.type = INTEL_OUTPUT_ANALOG;
+	crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
+				1 << INTEL_ANALOG_CLONE_BIT |
+				1 << INTEL_SDVO_LVDS_CLONE_BIT);
+	crt->base.crtc_mask = (1 << 0) | (1 << 1);
+	if (IS_GEN2(dev))
+		connector->interlace_allowed = 0;
+	else
+		connector->interlace_allowed = 1;
+	connector->doublescan_allowed = 0;
+
+	drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs);
+	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
+
+	drm_sysfs_connector_add(connector);
+
+	if (I915_HAS_HOTPLUG(dev))
+		connector->polled = DRM_CONNECTOR_POLL_HPD;
+	else
+		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+
+	/*
+	 * Configure the automatic hotplug detection stuff
+	 */
+	crt->force_hotplug_required = 0;
+	if (HAS_PCH_SPLIT(dev)) {
+		u32 adpa;
+
+		adpa = I915_READ(PCH_ADPA);
+		adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+		adpa |= ADPA_HOTPLUG_BITS;
+		I915_WRITE(PCH_ADPA, adpa);
+		POSTING_READ(PCH_ADPA);
+
+		DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
+		crt->force_hotplug_required = 1;
+	}
+
+	dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
+}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
new file mode 100644
index 00000000..d4d162f6
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -0,0 +1,9458 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/vgaarb.h>
+#include <drm/drm_edid.h>
+#include "drmP.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "i915_trace.h"
+#include "drm_dp_helper.h"
+#include "drm_crtc_helper.h"
+#include <linux/dma_remapping.h>
+
+#define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
+
+bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
+static void intel_update_watermarks(struct drm_device *dev);
+static void intel_increase_pllclock(struct drm_crtc *crtc);
+static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
+
+typedef struct {
+	/* given values */
+	int n;
+	int m1, m2;
+	int p1, p2;
+	/* derived values */
+	int	dot;
+	int	vco;
+	int	m;
+	int	p;
+} intel_clock_t;
+
+typedef struct {
+	int	min, max;
+} intel_range_t;
+
+typedef struct {
+	int	dot_limit;
+	int	p2_slow, p2_fast;
+} intel_p2_t;
+
+#define INTEL_P2_NUM		      2
+typedef struct intel_limit intel_limit_t;
+struct intel_limit {
+	intel_range_t   dot, vco, n, m, m1, m2, p, p1;
+	intel_p2_t	    p2;
+	bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
+			int, int, intel_clock_t *, intel_clock_t *);
+};
+
+/* FDI */
+#define IRONLAKE_FDI_FREQ		2700000 /* in kHz for mode->clock */
+
+static bool
+intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+		    int target, int refclk, intel_clock_t *match_clock,
+		    intel_clock_t *best_clock);
+static bool
+intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+			int target, int refclk, intel_clock_t *match_clock,
+			intel_clock_t *best_clock);
+
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *match_clock,
+		      intel_clock_t *best_clock);
+static bool
+intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
+			   int target, int refclk, intel_clock_t *match_clock,
+			   intel_clock_t *best_clock);
+
+static inline u32 /* units of 100MHz */
+intel_fdi_link_freq(struct drm_device *dev)
+{
+	if (IS_GEN5(dev)) {
+		struct drm_i915_private *dev_priv = dev->dev_private;
+		return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
+	} else
+		return 27;
+}
+
+static const intel_limit_t intel_limits_i8xx_dvo = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 930000, .max = 1400000 },
+	.n = { .min = 3, .max = 16 },
+	.m = { .min = 96, .max = 140 },
+	.m1 = { .min = 18, .max = 26 },
+	.m2 = { .min = 6, .max = 16 },
+	.p = { .min = 4, .max = 128 },
+	.p1 = { .min = 2, .max = 33 },
+	.p2 = { .dot_limit = 165000,
+		.p2_slow = 4, .p2_fast = 2 },
+	.find_pll = intel_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_i8xx_lvds = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 930000, .max = 1400000 },
+	.n = { .min = 3, .max = 16 },
+	.m = { .min = 96, .max = 140 },
+	.m1 = { .min = 18, .max = 26 },
+	.m2 = { .min = 6, .max = 16 },
+	.p = { .min = 4, .max = 128 },
+	.p1 = { .min = 1, .max = 6 },
+	.p2 = { .dot_limit = 165000,
+		.p2_slow = 14, .p2_fast = 7 },
+	.find_pll = intel_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_i9xx_sdvo = {
+	.dot = { .min = 20000, .max = 400000 },
+	.vco = { .min = 1400000, .max = 2800000 },
+	.n = { .min = 1, .max = 6 },
+	.m = { .min = 70, .max = 120 },
+	.m1 = { .min = 10, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 5, .max = 80 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 200000,
+		.p2_slow = 10, .p2_fast = 5 },
+	.find_pll = intel_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_i9xx_lvds = {
+	.dot = { .min = 20000, .max = 400000 },
+	.vco = { .min = 1400000, .max = 2800000 },
+	.n = { .min = 1, .max = 6 },
+	.m = { .min = 70, .max = 120 },
+	.m1 = { .min = 10, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 7, .max = 98 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 112000,
+		.p2_slow = 14, .p2_fast = 7 },
+	.find_pll = intel_find_best_PLL,
+};
+
+
+static const intel_limit_t intel_limits_g4x_sdvo = {
+	.dot = { .min = 25000, .max = 270000 },
+	.vco = { .min = 1750000, .max = 3500000},
+	.n = { .min = 1, .max = 4 },
+	.m = { .min = 104, .max = 138 },
+	.m1 = { .min = 17, .max = 23 },
+	.m2 = { .min = 5, .max = 11 },
+	.p = { .min = 10, .max = 30 },
+	.p1 = { .min = 1, .max = 3},
+	.p2 = { .dot_limit = 270000,
+		.p2_slow = 10,
+		.p2_fast = 10
+	},
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_g4x_hdmi = {
+	.dot = { .min = 22000, .max = 400000 },
+	.vco = { .min = 1750000, .max = 3500000},
+	.n = { .min = 1, .max = 4 },
+	.m = { .min = 104, .max = 138 },
+	.m1 = { .min = 16, .max = 23 },
+	.m2 = { .min = 5, .max = 11 },
+	.p = { .min = 5, .max = 80 },
+	.p1 = { .min = 1, .max = 8},
+	.p2 = { .dot_limit = 165000,
+		.p2_slow = 10, .p2_fast = 5 },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
+	.dot = { .min = 20000, .max = 115000 },
+	.vco = { .min = 1750000, .max = 3500000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 104, .max = 138 },
+	.m1 = { .min = 17, .max = 23 },
+	.m2 = { .min = 5, .max = 11 },
+	.p = { .min = 28, .max = 112 },
+	.p1 = { .min = 2, .max = 8 },
+	.p2 = { .dot_limit = 0,
+		.p2_slow = 14, .p2_fast = 14
+	},
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
+	.dot = { .min = 80000, .max = 224000 },
+	.vco = { .min = 1750000, .max = 3500000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 104, .max = 138 },
+	.m1 = { .min = 17, .max = 23 },
+	.m2 = { .min = 5, .max = 11 },
+	.p = { .min = 14, .max = 42 },
+	.p1 = { .min = 2, .max = 6 },
+	.p2 = { .dot_limit = 0,
+		.p2_slow = 7, .p2_fast = 7
+	},
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_g4x_display_port = {
+	.dot = { .min = 161670, .max = 227000 },
+	.vco = { .min = 1750000, .max = 3500000},
+	.n = { .min = 1, .max = 2 },
+	.m = { .min = 97, .max = 108 },
+	.m1 = { .min = 0x10, .max = 0x12 },
+	.m2 = { .min = 0x05, .max = 0x06 },
+	.p = { .min = 10, .max = 20 },
+	.p1 = { .min = 1, .max = 2},
+	.p2 = { .dot_limit = 0,
+		.p2_slow = 10, .p2_fast = 10 },
+	.find_pll = intel_find_pll_g4x_dp,
+};
+
+static const intel_limit_t intel_limits_pineview_sdvo = {
+	.dot = { .min = 20000, .max = 400000},
+	.vco = { .min = 1700000, .max = 3500000 },
+	/* Pineview's Ncounter is a ring counter */
+	.n = { .min = 3, .max = 6 },
+	.m = { .min = 2, .max = 256 },
+	/* Pineview only has one combined m divider, which we treat as m2. */
+	.m1 = { .min = 0, .max = 0 },
+	.m2 = { .min = 0, .max = 254 },
+	.p = { .min = 5, .max = 80 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 200000,
+		.p2_slow = 10, .p2_fast = 5 },
+	.find_pll = intel_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_pineview_lvds = {
+	.dot = { .min = 20000, .max = 400000 },
+	.vco = { .min = 1700000, .max = 3500000 },
+	.n = { .min = 3, .max = 6 },
+	.m = { .min = 2, .max = 256 },
+	.m1 = { .min = 0, .max = 0 },
+	.m2 = { .min = 0, .max = 254 },
+	.p = { .min = 7, .max = 112 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 112000,
+		.p2_slow = 14, .p2_fast = 14 },
+	.find_pll = intel_find_best_PLL,
+};
+
+/* Ironlake / Sandybridge
+ *
+ * We calculate clock using (register_value + 2) for N/M1/M2, so here
+ * the range value for them is (actual_value - 2).
+ */
+static const intel_limit_t intel_limits_ironlake_dac = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 5 },
+	.m = { .min = 79, .max = 127 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 5, .max = 80 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 10, .p2_fast = 5 },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_single_lvds = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 79, .max = 118 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 28, .max = 112 },
+	.p1 = { .min = 2, .max = 8 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 14, .p2_fast = 14 },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_dual_lvds = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 79, .max = 127 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 14, .max = 56 },
+	.p1 = { .min = 2, .max = 8 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 7, .p2_fast = 7 },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+/* LVDS 100mhz refclk limits. */
+static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 2 },
+	.m = { .min = 79, .max = 126 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 28, .max = 112 },
+	.p1 = { .min = 2, .max = 8 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 14, .p2_fast = 14 },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 79, .max = 126 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 14, .max = 42 },
+	.p1 = { .min = 2, .max = 6 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 7, .p2_fast = 7 },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_display_port = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000},
+	.n = { .min = 1, .max = 2 },
+	.m = { .min = 81, .max = 90 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 10, .max = 20 },
+	.p1 = { .min = 1, .max = 2},
+	.p2 = { .dot_limit = 0,
+		.p2_slow = 10, .p2_fast = 10 },
+	.find_pll = intel_find_pll_ironlake_dp,
+};
+
+static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
+						int refclk)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	const intel_limit_t *limit;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP) {
+			/* LVDS dual channel */
+			if (refclk == 100000)
+				limit = &intel_limits_ironlake_dual_lvds_100m;
+			else
+				limit = &intel_limits_ironlake_dual_lvds;
+		} else {
+			if (refclk == 100000)
+				limit = &intel_limits_ironlake_single_lvds_100m;
+			else
+				limit = &intel_limits_ironlake_single_lvds;
+		}
+	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+			HAS_eDP)
+		limit = &intel_limits_ironlake_display_port;
+	else
+		limit = &intel_limits_ironlake_dac;
+
+	return limit;
+}
+
+static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	const intel_limit_t *limit;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			/* LVDS with dual channel */
+			limit = &intel_limits_g4x_dual_channel_lvds;
+		else
+			/* LVDS with dual channel */
+			limit = &intel_limits_g4x_single_channel_lvds;
+	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
+		   intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
+		limit = &intel_limits_g4x_hdmi;
+	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
+		limit = &intel_limits_g4x_sdvo;
+	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+		limit = &intel_limits_g4x_display_port;
+	} else /* The option is for other outputs */
+		limit = &intel_limits_i9xx_sdvo;
+
+	return limit;
+}
+
+static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
+{
+	struct drm_device *dev = crtc->dev;
+	const intel_limit_t *limit;
+
+	if (HAS_PCH_SPLIT(dev))
+		limit = intel_ironlake_limit(crtc, refclk);
+	else if (IS_G4X(dev)) {
+		limit = intel_g4x_limit(crtc);
+	} else if (IS_PINEVIEW(dev)) {
+		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+			limit = &intel_limits_pineview_lvds;
+		else
+			limit = &intel_limits_pineview_sdvo;
+	} else if (!IS_GEN2(dev)) {
+		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+			limit = &intel_limits_i9xx_lvds;
+		else
+			limit = &intel_limits_i9xx_sdvo;
+	} else {
+		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+			limit = &intel_limits_i8xx_lvds;
+		else
+			limit = &intel_limits_i8xx_dvo;
+	}
+	return limit;
+}
+
+/* m1 is reserved as 0 in Pineview, n is a ring counter */
+static void pineview_clock(int refclk, intel_clock_t *clock)
+{
+	clock->m = clock->m2 + 2;
+	clock->p = clock->p1 * clock->p2;
+	clock->vco = refclk * clock->m / clock->n;
+	clock->dot = clock->vco / clock->p;
+}
+
+static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
+{
+	if (IS_PINEVIEW(dev)) {
+		pineview_clock(refclk, clock);
+		return;
+	}
+	clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+	clock->p = clock->p1 * clock->p2;
+	clock->vco = refclk * clock->m / (clock->n + 2);
+	clock->dot = clock->vco / clock->p;
+}
+
+/**
+ * Returns whether any output on the specified pipe is of the specified type
+ */
+bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+		if (encoder->base.crtc == crtc && encoder->type == type)
+			return true;
+
+	return false;
+}
+
+#define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
+/**
+ * Returns whether the given set of divisors are valid for a given refclk with
+ * the given connectors.
+ */
+
+static bool intel_PLL_is_valid(struct drm_device *dev,
+			       const intel_limit_t *limit,
+			       const intel_clock_t *clock)
+{
+	if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
+		INTELPllInvalid("p1 out of range\n");
+	if (clock->p   < limit->p.min   || limit->p.max   < clock->p)
+		INTELPllInvalid("p out of range\n");
+	if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
+		INTELPllInvalid("m2 out of range\n");
+	if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
+		INTELPllInvalid("m1 out of range\n");
+	if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
+		INTELPllInvalid("m1 <= m2\n");
+	if (clock->m   < limit->m.min   || limit->m.max   < clock->m)
+		INTELPllInvalid("m out of range\n");
+	if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
+		INTELPllInvalid("n out of range\n");
+	if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+		INTELPllInvalid("vco out of range\n");
+	/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
+	 * connector, etc., rather than just a single range.
+	 */
+	if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+		INTELPllInvalid("dot out of range\n");
+
+	return true;
+}
+
+static bool
+intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+		    int target, int refclk, intel_clock_t *match_clock,
+		    intel_clock_t *best_clock)
+
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	intel_clock_t clock;
+	int err = target;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	    (I915_READ(LVDS)) != 0) {
+		/*
+		 * For LVDS, if the panel is on, just rely on its current
+		 * settings for dual-channel.  We haven't figured out how to
+		 * reliably set up different single/dual channel state, if we
+		 * even can.
+		 */
+		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			clock.p2 = limit->p2.p2_fast;
+		else
+			clock.p2 = limit->p2.p2_slow;
+	} else {
+		if (target < limit->p2.dot_limit)
+			clock.p2 = limit->p2.p2_slow;
+		else
+			clock.p2 = limit->p2.p2_fast;
+	}
+
+	memset(best_clock, 0, sizeof(*best_clock));
+
+	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
+	     clock.m1++) {
+		for (clock.m2 = limit->m2.min;
+		     clock.m2 <= limit->m2.max; clock.m2++) {
+			/* m1 is always 0 in Pineview */
+			if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
+				break;
+			for (clock.n = limit->n.min;
+			     clock.n <= limit->n.max; clock.n++) {
+				for (clock.p1 = limit->p1.min;
+					clock.p1 <= limit->p1.max; clock.p1++) {
+					int this_err;
+
+					intel_clock(dev, refclk, &clock);
+					if (!intel_PLL_is_valid(dev, limit,
+								&clock))
+						continue;
+					if (match_clock &&
+					    clock.p != match_clock->p)
+						continue;
+
+					this_err = abs(clock.dot - target);
+					if (this_err < err) {
+						*best_clock = clock;
+						err = this_err;
+					}
+				}
+			}
+		}
+	}
+
+	return (err != target);
+}
+
+static bool
+intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+			int target, int refclk, intel_clock_t *match_clock,
+			intel_clock_t *best_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	intel_clock_t clock;
+	int max_n;
+	bool found;
+	/* approximately equals target * 0.00585 */
+	int err_most = (target >> 8) + (target >> 9);
+	found = false;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		int lvds_reg;
+
+		if (HAS_PCH_SPLIT(dev))
+			lvds_reg = PCH_LVDS;
+		else
+			lvds_reg = LVDS;
+		if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			clock.p2 = limit->p2.p2_fast;
+		else
+			clock.p2 = limit->p2.p2_slow;
+	} else {
+		if (target < limit->p2.dot_limit)
+			clock.p2 = limit->p2.p2_slow;
+		else
+			clock.p2 = limit->p2.p2_fast;
+	}
+
+	memset(best_clock, 0, sizeof(*best_clock));
+	max_n = limit->n.max;
+	/* based on hardware requirement, prefer smaller n to precision */
+	for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
+		/* based on hardware requirement, prefere larger m1,m2 */
+		for (clock.m1 = limit->m1.max;
+		     clock.m1 >= limit->m1.min; clock.m1--) {
+			for (clock.m2 = limit->m2.max;
+			     clock.m2 >= limit->m2.min; clock.m2--) {
+				for (clock.p1 = limit->p1.max;
+				     clock.p1 >= limit->p1.min; clock.p1--) {
+					int this_err;
+
+					intel_clock(dev, refclk, &clock);
+					if (!intel_PLL_is_valid(dev, limit,
+								&clock))
+						continue;
+					if (match_clock &&
+					    clock.p != match_clock->p)
+						continue;
+
+					this_err = abs(clock.dot - target);
+					if (this_err < err_most) {
+						*best_clock = clock;
+						err_most = this_err;
+						max_n = clock.n;
+						found = true;
+					}
+				}
+			}
+		}
+	}
+	return found;
+}
+
+static bool
+intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+			   int target, int refclk, intel_clock_t *match_clock,
+			   intel_clock_t *best_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	intel_clock_t clock;
+
+	if (target < 200000) {
+		clock.n = 1;
+		clock.p1 = 2;
+		clock.p2 = 10;
+		clock.m1 = 12;
+		clock.m2 = 9;
+	} else {
+		clock.n = 2;
+		clock.p1 = 1;
+		clock.p2 = 10;
+		clock.m1 = 14;
+		clock.m2 = 8;
+	}
+	intel_clock(dev, refclk, &clock);
+	memcpy(best_clock, &clock, sizeof(intel_clock_t));
+	return true;
+}
+
+/* DisplayPort has only two frequencies, 162MHz and 270MHz */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *match_clock,
+		      intel_clock_t *best_clock)
+{
+	intel_clock_t clock;
+	if (target < 200000) {
+		clock.p1 = 2;
+		clock.p2 = 10;
+		clock.n = 2;
+		clock.m1 = 23;
+		clock.m2 = 8;
+	} else {
+		clock.p1 = 1;
+		clock.p2 = 10;
+		clock.n = 1;
+		clock.m1 = 14;
+		clock.m2 = 2;
+	}
+	clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
+	clock.p = (clock.p1 * clock.p2);
+	clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
+	clock.vco = 0;
+	memcpy(best_clock, &clock, sizeof(intel_clock_t));
+	return true;
+}
+
+/**
+ * intel_wait_for_vblank - wait for vblank on a given pipe
+ * @dev: drm device
+ * @pipe: pipe to wait for
+ *
+ * Wait for vblank to occur on a given pipe.  Needed for various bits of
+ * mode setting code.
+ */
+void intel_wait_for_vblank(struct drm_device *dev, int pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pipestat_reg = PIPESTAT(pipe);
+
+	/* Clear existing vblank status. Note this will clear any other
+	 * sticky status fields as well.
+	 *
+	 * This races with i915_driver_irq_handler() with the result
+	 * that either function could miss a vblank event.  Here it is not
+	 * fatal, as we will either wait upon the next vblank interrupt or
+	 * timeout.  Generally speaking intel_wait_for_vblank() is only
+	 * called during modeset at which time the GPU should be idle and
+	 * should *not* be performing page flips and thus not waiting on
+	 * vblanks...
+	 * Currently, the result of us stealing a vblank from the irq
+	 * handler is that a single frame will be skipped during swapbuffers.
+	 */
+	I915_WRITE(pipestat_reg,
+		   I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
+
+	/* Wait for vblank interrupt bit to set */
+	if (wait_for(I915_READ(pipestat_reg) &
+		     PIPE_VBLANK_INTERRUPT_STATUS,
+		     50))
+		DRM_DEBUG_KMS("vblank wait timed out\n");
+}
+
+/*
+ * intel_wait_for_pipe_off - wait for pipe to turn off
+ * @dev: drm device
+ * @pipe: pipe to wait for
+ *
+ * After disabling a pipe, we can't wait for vblank in the usual way,
+ * spinning on the vblank interrupt status bit, since we won't actually
+ * see an interrupt when the pipe is disabled.
+ *
+ * On Gen4 and above:
+ *   wait for the pipe register state bit to turn off
+ *
+ * Otherwise:
+ *   wait for the display line value to settle (it usually
+ *   ends up stopping at the start of the next frame).
+ *
+ */
+void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (INTEL_INFO(dev)->gen >= 4) {
+		int reg = PIPECONF(pipe);
+
+		/* Wait for the Pipe State to go off */
+		if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0,
+			     100))
+			DRM_DEBUG_KMS("pipe_off wait timed out\n");
+	} else {
+		u32 last_line;
+		int reg = PIPEDSL(pipe);
+		unsigned long timeout = jiffies + msecs_to_jiffies(100);
+
+		/* Wait for the display line to settle */
+		do {
+			last_line = I915_READ(reg) & DSL_LINEMASK;
+			mdelay(5);
+		} while (((I915_READ(reg) & DSL_LINEMASK) != last_line) &&
+			 time_after(timeout, jiffies));
+		if (time_after(jiffies, timeout))
+			DRM_DEBUG_KMS("pipe_off wait timed out\n");
+	}
+}
+
+static const char *state_string(bool enabled)
+{
+	return enabled ? "on" : "off";
+}
+
+/* Only for pre-ILK configs */
+static void assert_pll(struct drm_i915_private *dev_priv,
+		       enum pipe pipe, bool state)
+{
+	int reg;
+	u32 val;
+	bool cur_state;
+
+	reg = DPLL(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & DPLL_VCO_ENABLE);
+	WARN(cur_state != state,
+	     "PLL state assertion failure (expected %s, current %s)\n",
+	     state_string(state), state_string(cur_state));
+}
+#define assert_pll_enabled(d, p) assert_pll(d, p, true)
+#define assert_pll_disabled(d, p) assert_pll(d, p, false)
+
+/* For ILK+ */
+static void assert_pch_pll(struct drm_i915_private *dev_priv,
+			   enum pipe pipe, bool state)
+{
+	int reg;
+	u32 val;
+	bool cur_state;
+
+	if (HAS_PCH_CPT(dev_priv->dev)) {
+		u32 pch_dpll;
+
+		pch_dpll = I915_READ(PCH_DPLL_SEL);
+
+		/* Make sure the selected PLL is enabled to the transcoder */
+		WARN(!((pch_dpll >> (4 * pipe)) & 8),
+		     "transcoder %d PLL not enabled\n", pipe);
+
+		/* Convert the transcoder pipe number to a pll pipe number */
+		pipe = (pch_dpll >> (4 * pipe)) & 1;
+	}
+
+	reg = PCH_DPLL(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & DPLL_VCO_ENABLE);
+	WARN(cur_state != state,
+	     "PCH PLL state assertion failure (expected %s, current %s)\n",
+	     state_string(state), state_string(cur_state));
+}
+#define assert_pch_pll_enabled(d, p) assert_pch_pll(d, p, true)
+#define assert_pch_pll_disabled(d, p) assert_pch_pll(d, p, false)
+
+static void assert_fdi_tx(struct drm_i915_private *dev_priv,
+			  enum pipe pipe, bool state)
+{
+	int reg;
+	u32 val;
+	bool cur_state;
+
+	reg = FDI_TX_CTL(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & FDI_TX_ENABLE);
+	WARN(cur_state != state,
+	     "FDI TX state assertion failure (expected %s, current %s)\n",
+	     state_string(state), state_string(cur_state));
+}
+#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
+#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
+
+static void assert_fdi_rx(struct drm_i915_private *dev_priv,
+			  enum pipe pipe, bool state)
+{
+	int reg;
+	u32 val;
+	bool cur_state;
+
+	reg = FDI_RX_CTL(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & FDI_RX_ENABLE);
+	WARN(cur_state != state,
+	     "FDI RX state assertion failure (expected %s, current %s)\n",
+	     state_string(state), state_string(cur_state));
+}
+#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
+#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
+
+static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
+				      enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	/* ILK FDI PLL is always enabled */
+	if (dev_priv->info->gen == 5)
+		return;
+
+	reg = FDI_TX_CTL(pipe);
+	val = I915_READ(reg);
+	WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
+}
+
+static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv,
+				      enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	reg = FDI_RX_CTL(pipe);
+	val = I915_READ(reg);
+	WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n");
+}
+
+static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
+				  enum pipe pipe)
+{
+	int pp_reg, lvds_reg;
+	u32 val;
+	enum pipe panel_pipe = PIPE_A;
+	bool locked = true;
+
+	if (HAS_PCH_SPLIT(dev_priv->dev)) {
+		pp_reg = PCH_PP_CONTROL;
+		lvds_reg = PCH_LVDS;
+	} else {
+		pp_reg = PP_CONTROL;
+		lvds_reg = LVDS;
+	}
+
+	val = I915_READ(pp_reg);
+	if (!(val & PANEL_POWER_ON) ||
+	    ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
+		locked = false;
+
+	if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
+		panel_pipe = PIPE_B;
+
+	WARN(panel_pipe == pipe && locked,
+	     "panel assertion failure, pipe %c regs locked\n",
+	     pipe_name(pipe));
+}
+
+void assert_pipe(struct drm_i915_private *dev_priv,
+		 enum pipe pipe, bool state)
+{
+	int reg;
+	u32 val;
+	bool cur_state;
+
+	/* if we need the pipe A quirk it must be always on */
+	if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
+		state = true;
+
+	reg = PIPECONF(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & PIPECONF_ENABLE);
+	WARN(cur_state != state,
+	     "pipe %c assertion failure (expected %s, current %s)\n",
+	     pipe_name(pipe), state_string(state), state_string(cur_state));
+}
+
+static void assert_plane(struct drm_i915_private *dev_priv,
+			 enum plane plane, bool state)
+{
+	int reg;
+	u32 val;
+	bool cur_state;
+
+	reg = DSPCNTR(plane);
+	val = I915_READ(reg);
+	cur_state = !!(val & DISPLAY_PLANE_ENABLE);
+	WARN(cur_state != state,
+	     "plane %c assertion failure (expected %s, current %s)\n",
+	     plane_name(plane), state_string(state), state_string(cur_state));
+}
+
+#define assert_plane_enabled(d, p) assert_plane(d, p, true)
+#define assert_plane_disabled(d, p) assert_plane(d, p, false)
+
+static void assert_planes_disabled(struct drm_i915_private *dev_priv,
+				   enum pipe pipe)
+{
+	int reg, i;
+	u32 val;
+	int cur_pipe;
+
+	/* Planes are fixed to pipes on ILK+ */
+	if (HAS_PCH_SPLIT(dev_priv->dev)) {
+		reg = DSPCNTR(pipe);
+		val = I915_READ(reg);
+		WARN((val & DISPLAY_PLANE_ENABLE),
+		     "plane %c assertion failure, should be disabled but not\n",
+		     plane_name(pipe));
+		return;
+	}
+
+	/* Need to check both planes against the pipe */
+	for (i = 0; i < 2; i++) {
+		reg = DSPCNTR(i);
+		val = I915_READ(reg);
+		cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
+			DISPPLANE_SEL_PIPE_SHIFT;
+		WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
+		     "plane %c assertion failure, should be off on pipe %c but is still active\n",
+		     plane_name(i), pipe_name(pipe));
+	}
+}
+
+static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
+{
+	u32 val;
+	bool enabled;
+
+	val = I915_READ(PCH_DREF_CONTROL);
+	enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
+			    DREF_SUPERSPREAD_SOURCE_MASK));
+	WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
+}
+
+static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
+				       enum pipe pipe)
+{
+	int reg;
+	u32 val;
+	bool enabled;
+
+	reg = TRANSCONF(pipe);
+	val = I915_READ(reg);
+	enabled = !!(val & TRANS_ENABLE);
+	WARN(enabled,
+	     "transcoder assertion failed, should be off on pipe %c but is still active\n",
+	     pipe_name(pipe));
+}
+
+static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
+			    enum pipe pipe, u32 port_sel, u32 val)
+{
+	if ((val & DP_PORT_EN) == 0)
+		return false;
+
+	if (HAS_PCH_CPT(dev_priv->dev)) {
+		u32	trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
+		u32	trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
+		if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
+			return false;
+	} else {
+		if ((val & DP_PIPE_MASK) != (pipe << 30))
+			return false;
+	}
+	return true;
+}
+
+static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
+			      enum pipe pipe, u32 val)
+{
+	if ((val & PORT_ENABLE) == 0)
+		return false;
+
+	if (HAS_PCH_CPT(dev_priv->dev)) {
+		if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+			return false;
+	} else {
+		if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
+			return false;
+	}
+	return true;
+}
+
+static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
+			      enum pipe pipe, u32 val)
+{
+	if ((val & LVDS_PORT_EN) == 0)
+		return false;
+
+	if (HAS_PCH_CPT(dev_priv->dev)) {
+		if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+			return false;
+	} else {
+		if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
+			return false;
+	}
+	return true;
+}
+
+static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
+			      enum pipe pipe, u32 val)
+{
+	if ((val & ADPA_DAC_ENABLE) == 0)
+		return false;
+	if (HAS_PCH_CPT(dev_priv->dev)) {
+		if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+			return false;
+	} else {
+		if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
+			return false;
+	}
+	return true;
+}
+
+static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
+				   enum pipe pipe, int reg, u32 port_sel)
+{
+	u32 val = I915_READ(reg);
+	WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
+	     "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
+	     reg, pipe_name(pipe));
+}
+
+static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
+				     enum pipe pipe, int reg)
+{
+	u32 val = I915_READ(reg);
+	WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
+	     "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
+	     reg, pipe_name(pipe));
+}
+
+static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
+				      enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
+	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
+	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
+
+	reg = PCH_ADPA;
+	val = I915_READ(reg);
+	WARN(adpa_pipe_enabled(dev_priv, val, pipe),
+	     "PCH VGA enabled on transcoder %c, should be disabled\n",
+	     pipe_name(pipe));
+
+	reg = PCH_LVDS;
+	val = I915_READ(reg);
+	WARN(lvds_pipe_enabled(dev_priv, val, pipe),
+	     "PCH LVDS enabled on transcoder %c, should be disabled\n",
+	     pipe_name(pipe));
+
+	assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB);
+	assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC);
+	assert_pch_hdmi_disabled(dev_priv, pipe, HDMID);
+}
+
+/**
+ * intel_enable_pll - enable a PLL
+ * @dev_priv: i915 private structure
+ * @pipe: pipe PLL to enable
+ *
+ * Enable @pipe's PLL so we can start pumping pixels from a plane.  Check to
+ * make sure the PLL reg is writable first though, since the panel write
+ * protect mechanism may be enabled.
+ *
+ * Note!  This is for pre-ILK only.
+ */
+static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	/* No really, not for ILK+ */
+	BUG_ON(dev_priv->info->gen >= 5);
+
+	/* PLL is protected by panel, make sure we can write it */
+	if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
+		assert_panel_unlocked(dev_priv, pipe);
+
+	reg = DPLL(pipe);
+	val = I915_READ(reg);
+	val |= DPLL_VCO_ENABLE;
+
+	/* We do this three times for luck */
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
+	udelay(150); /* wait for warmup */
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
+	udelay(150); /* wait for warmup */
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
+	udelay(150); /* wait for warmup */
+}
+
+/**
+ * intel_disable_pll - disable a PLL
+ * @dev_priv: i915 private structure
+ * @pipe: pipe PLL to disable
+ *
+ * Disable the PLL for @pipe, making sure the pipe is off first.
+ *
+ * Note!  This is for pre-ILK only.
+ */
+static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	/* Don't disable pipe A or pipe A PLLs if needed */
+	if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+		return;
+
+	/* Make sure the pipe isn't still relying on us */
+	assert_pipe_disabled(dev_priv, pipe);
+
+	reg = DPLL(pipe);
+	val = I915_READ(reg);
+	val &= ~DPLL_VCO_ENABLE;
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
+}
+
+/**
+ * intel_enable_pch_pll - enable PCH PLL
+ * @dev_priv: i915 private structure
+ * @pipe: pipe PLL to enable
+ *
+ * The PCH PLL needs to be enabled before the PCH transcoder, since it
+ * drives the transcoder clock.
+ */
+static void intel_enable_pch_pll(struct drm_i915_private *dev_priv,
+				 enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	if (pipe > 1)
+		return;
+
+	/* PCH only available on ILK+ */
+	BUG_ON(dev_priv->info->gen < 5);
+
+	/* PCH refclock must be enabled first */
+	assert_pch_refclk_enabled(dev_priv);
+
+	reg = PCH_DPLL(pipe);
+	val = I915_READ(reg);
+	val |= DPLL_VCO_ENABLE;
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
+	udelay(200);
+}
+
+static void intel_disable_pch_pll(struct drm_i915_private *dev_priv,
+				  enum pipe pipe)
+{
+	int reg;
+	u32 val, pll_mask = TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL,
+		pll_sel = TRANSC_DPLL_ENABLE;
+
+	if (pipe > 1)
+		return;
+
+	/* PCH only available on ILK+ */
+	BUG_ON(dev_priv->info->gen < 5);
+
+	/* Make sure transcoder isn't still depending on us */
+	assert_transcoder_disabled(dev_priv, pipe);
+
+	if (pipe == 0)
+		pll_sel |= TRANSC_DPLLA_SEL;
+	else if (pipe == 1)
+		pll_sel |= TRANSC_DPLLB_SEL;
+
+
+	if ((I915_READ(PCH_DPLL_SEL) & pll_mask) == pll_sel)
+		return;
+
+	reg = PCH_DPLL(pipe);
+	val = I915_READ(reg);
+	val &= ~DPLL_VCO_ENABLE;
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
+	udelay(200);
+}
+
+static void intel_enable_transcoder(struct drm_i915_private *dev_priv,
+				    enum pipe pipe)
+{
+	int reg;
+	u32 val, pipeconf_val;
+	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+
+	/* PCH only available on ILK+ */
+	BUG_ON(dev_priv->info->gen < 5);
+
+	/* Make sure PCH DPLL is enabled */
+	assert_pch_pll_enabled(dev_priv, pipe);
+
+	/* FDI must be feeding us bits for PCH ports */
+	assert_fdi_tx_enabled(dev_priv, pipe);
+	assert_fdi_rx_enabled(dev_priv, pipe);
+
+	reg = TRANSCONF(pipe);
+	val = I915_READ(reg);
+	pipeconf_val = I915_READ(PIPECONF(pipe));
+
+	if (HAS_PCH_IBX(dev_priv->dev)) {
+		/*
+		 * make the BPC in transcoder be consistent with
+		 * that in pipeconf reg.
+		 */
+		val &= ~PIPE_BPC_MASK;
+		val |= pipeconf_val & PIPE_BPC_MASK;
+	}
+
+	val &= ~TRANS_INTERLACE_MASK;
+	if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
+		if (HAS_PCH_IBX(dev_priv->dev) &&
+		    intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
+			val |= TRANS_LEGACY_INTERLACED_ILK;
+		else
+			val |= TRANS_INTERLACED;
+	else
+		val |= TRANS_PROGRESSIVE;
+
+	I915_WRITE(reg, val | TRANS_ENABLE);
+	if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
+		DRM_ERROR("failed to enable transcoder %d\n", pipe);
+}
+
+static void intel_disable_transcoder(struct drm_i915_private *dev_priv,
+				     enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	/* FDI relies on the transcoder */
+	assert_fdi_tx_disabled(dev_priv, pipe);
+	assert_fdi_rx_disabled(dev_priv, pipe);
+
+	/* Ports must be off as well */
+	assert_pch_ports_disabled(dev_priv, pipe);
+
+	reg = TRANSCONF(pipe);
+	val = I915_READ(reg);
+	val &= ~TRANS_ENABLE;
+	I915_WRITE(reg, val);
+	/* wait for PCH transcoder off, transcoder state */
+	if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
+		DRM_ERROR("failed to disable transcoder %d\n", pipe);
+}
+
+/**
+ * intel_enable_pipe - enable a pipe, asserting requirements
+ * @dev_priv: i915 private structure
+ * @pipe: pipe to enable
+ * @pch_port: on ILK+, is this pipe driving a PCH port or not
+ *
+ * Enable @pipe, making sure that various hardware specific requirements
+ * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
+ *
+ * @pipe should be %PIPE_A or %PIPE_B.
+ *
+ * Will wait until the pipe is actually running (i.e. first vblank) before
+ * returning.
+ */
+static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
+			      bool pch_port)
+{
+	int reg;
+	u32 val;
+
+	/*
+	 * A pipe without a PLL won't actually be able to drive bits from
+	 * a plane.  On ILK+ the pipe PLLs are integrated, so we don't
+	 * need the check.
+	 */
+	if (!HAS_PCH_SPLIT(dev_priv->dev))
+		assert_pll_enabled(dev_priv, pipe);
+	else {
+		if (pch_port) {
+			/* if driving the PCH, we need FDI enabled */
+			assert_fdi_rx_pll_enabled(dev_priv, pipe);
+			assert_fdi_tx_pll_enabled(dev_priv, pipe);
+		}
+		/* FIXME: assert CPU port conditions for SNB+ */
+	}
+
+	reg = PIPECONF(pipe);
+	val = I915_READ(reg);
+	if (val & PIPECONF_ENABLE)
+		return;
+
+	I915_WRITE(reg, val | PIPECONF_ENABLE);
+	intel_wait_for_vblank(dev_priv->dev, pipe);
+}
+
+/**
+ * intel_disable_pipe - disable a pipe, asserting requirements
+ * @dev_priv: i915 private structure
+ * @pipe: pipe to disable
+ *
+ * Disable @pipe, making sure that various hardware specific requirements
+ * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
+ *
+ * @pipe should be %PIPE_A or %PIPE_B.
+ *
+ * Will wait until the pipe has shut down before returning.
+ */
+static void intel_disable_pipe(struct drm_i915_private *dev_priv,
+			       enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	/*
+	 * Make sure planes won't keep trying to pump pixels to us,
+	 * or we might hang the display.
+	 */
+	assert_planes_disabled(dev_priv, pipe);
+
+	/* Don't disable pipe A or pipe A PLLs if needed */
+	if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+		return;
+
+	reg = PIPECONF(pipe);
+	val = I915_READ(reg);
+	if ((val & PIPECONF_ENABLE) == 0)
+		return;
+
+	I915_WRITE(reg, val & ~PIPECONF_ENABLE);
+	intel_wait_for_pipe_off(dev_priv->dev, pipe);
+}
+
+/*
+ * Plane regs are double buffered, going from enabled->disabled needs a
+ * trigger in order to latch.  The display address reg provides this.
+ */
+static void intel_flush_display_plane(struct drm_i915_private *dev_priv,
+				      enum plane plane)
+{
+	I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane)));
+	I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane)));
+}
+
+/**
+ * intel_enable_plane - enable a display plane on a given pipe
+ * @dev_priv: i915 private structure
+ * @plane: plane to enable
+ * @pipe: pipe being fed
+ *
+ * Enable @plane on @pipe, making sure that @pipe is running first.
+ */
+static void intel_enable_plane(struct drm_i915_private *dev_priv,
+			       enum plane plane, enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	/* If the pipe isn't enabled, we can't pump pixels and may hang */
+	assert_pipe_enabled(dev_priv, pipe);
+
+	reg = DSPCNTR(plane);
+	val = I915_READ(reg);
+	if (val & DISPLAY_PLANE_ENABLE)
+		return;
+
+	I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
+	intel_flush_display_plane(dev_priv, plane);
+	intel_wait_for_vblank(dev_priv->dev, pipe);
+}
+
+/**
+ * intel_disable_plane - disable a display plane
+ * @dev_priv: i915 private structure
+ * @plane: plane to disable
+ * @pipe: pipe consuming the data
+ *
+ * Disable @plane; should be an independent operation.
+ */
+static void intel_disable_plane(struct drm_i915_private *dev_priv,
+				enum plane plane, enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	reg = DSPCNTR(plane);
+	val = I915_READ(reg);
+	if ((val & DISPLAY_PLANE_ENABLE) == 0)
+		return;
+
+	I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
+	intel_flush_display_plane(dev_priv, plane);
+	intel_wait_for_vblank(dev_priv->dev, pipe);
+}
+
+static void disable_pch_dp(struct drm_i915_private *dev_priv,
+			   enum pipe pipe, int reg, u32 port_sel)
+{
+	u32 val = I915_READ(reg);
+	if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) {
+		DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe);
+		I915_WRITE(reg, val & ~DP_PORT_EN);
+	}
+}
+
+static void disable_pch_hdmi(struct drm_i915_private *dev_priv,
+			     enum pipe pipe, int reg)
+{
+	u32 val = I915_READ(reg);
+	if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
+		DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
+			      reg, pipe);
+		I915_WRITE(reg, val & ~PORT_ENABLE);
+	}
+}
+
+/* Disable any ports connected to this transcoder */
+static void intel_disable_pch_ports(struct drm_i915_private *dev_priv,
+				    enum pipe pipe)
+{
+	u32 reg, val;
+
+	val = I915_READ(PCH_PP_CONTROL);
+	I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS);
+
+	disable_pch_dp(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
+	disable_pch_dp(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
+	disable_pch_dp(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
+
+	reg = PCH_ADPA;
+	val = I915_READ(reg);
+	if (adpa_pipe_enabled(dev_priv, val, pipe))
+		I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);
+
+	reg = PCH_LVDS;
+	val = I915_READ(reg);
+	if (lvds_pipe_enabled(dev_priv, val, pipe)) {
+		DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
+		I915_WRITE(reg, val & ~LVDS_PORT_EN);
+		POSTING_READ(reg);
+		udelay(100);
+	}
+
+	disable_pch_hdmi(dev_priv, pipe, HDMIB);
+	disable_pch_hdmi(dev_priv, pipe, HDMIC);
+	disable_pch_hdmi(dev_priv, pipe, HDMID);
+}
+
+static void i8xx_disable_fbc(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 fbc_ctl;
+
+	/* Disable compression */
+	fbc_ctl = I915_READ(FBC_CONTROL);
+	if ((fbc_ctl & FBC_CTL_EN) == 0)
+		return;
+
+	fbc_ctl &= ~FBC_CTL_EN;
+	I915_WRITE(FBC_CONTROL, fbc_ctl);
+
+	/* Wait for compressing bit to clear */
+	if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10)) {
+		DRM_DEBUG_KMS("FBC idle timed out\n");
+		return;
+	}
+
+	DRM_DEBUG_KMS("disabled FBC\n");
+}
+
+static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_framebuffer *fb = crtc->fb;
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj = intel_fb->obj;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int cfb_pitch;
+	int plane, i;
+	u32 fbc_ctl, fbc_ctl2;
+
+	cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
+	if (fb->pitches[0] < cfb_pitch)
+		cfb_pitch = fb->pitches[0];
+
+	/* FBC_CTL wants 64B units */
+	cfb_pitch = (cfb_pitch / 64) - 1;
+	plane = intel_crtc->plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;
+
+	/* Clear old tags */
+	for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++)
+		I915_WRITE(FBC_TAG + (i * 4), 0);
+
+	/* Set it up... */
+	fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | FBC_CTL_CPU_FENCE;
+	fbc_ctl2 |= plane;
+	I915_WRITE(FBC_CONTROL2, fbc_ctl2);
+	I915_WRITE(FBC_FENCE_OFF, crtc->y);
+
+	/* enable it... */
+	fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
+	if (IS_I945GM(dev))
+		fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */
+	fbc_ctl |= (cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
+	fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
+	fbc_ctl |= obj->fence_reg;
+	I915_WRITE(FBC_CONTROL, fbc_ctl);
+
+	DRM_DEBUG_KMS("enabled FBC, pitch %d, yoff %d, plane %d, ",
+		      cfb_pitch, crtc->y, intel_crtc->plane);
+}
+
+static bool i8xx_fbc_enabled(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	return I915_READ(FBC_CONTROL) & FBC_CTL_EN;
+}
+
+static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_framebuffer *fb = crtc->fb;
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj = intel_fb->obj;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB;
+	unsigned long stall_watermark = 200;
+	u32 dpfc_ctl;
+
+	dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X;
+	dpfc_ctl |= DPFC_CTL_FENCE_EN | obj->fence_reg;
+	I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY);
+
+	I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
+		   (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
+		   (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
+	I915_WRITE(DPFC_FENCE_YOFF, crtc->y);
+
+	/* enable it... */
+	I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN);
+
+	DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
+}
+
+static void g4x_disable_fbc(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dpfc_ctl;
+
+	/* Disable compression */
+	dpfc_ctl = I915_READ(DPFC_CONTROL);
+	if (dpfc_ctl & DPFC_CTL_EN) {
+		dpfc_ctl &= ~DPFC_CTL_EN;
+		I915_WRITE(DPFC_CONTROL, dpfc_ctl);
+
+		DRM_DEBUG_KMS("disabled FBC\n");
+	}
+}
+
+static bool g4x_fbc_enabled(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
+}
+
+static void sandybridge_blit_fbc_update(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 blt_ecoskpd;
+
+	/* Make sure blitter notifies FBC of writes */
+	gen6_gt_force_wake_get(dev_priv);
+	blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD);
+	blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY <<
+		GEN6_BLITTER_LOCK_SHIFT;
+	I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
+	blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY;
+	I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
+	blt_ecoskpd &= ~(GEN6_BLITTER_FBC_NOTIFY <<
+			 GEN6_BLITTER_LOCK_SHIFT);
+	I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
+	POSTING_READ(GEN6_BLITTER_ECOSKPD);
+	gen6_gt_force_wake_put(dev_priv);
+}
+
+static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_framebuffer *fb = crtc->fb;
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj = intel_fb->obj;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB;
+	unsigned long stall_watermark = 200;
+	u32 dpfc_ctl;
+
+	dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
+	dpfc_ctl &= DPFC_RESERVED;
+	dpfc_ctl |= (plane | DPFC_CTL_LIMIT_1X);
+	/* Set persistent mode for front-buffer rendering, ala X. */
+	dpfc_ctl |= DPFC_CTL_PERSISTENT_MODE;
+	dpfc_ctl |= (DPFC_CTL_FENCE_EN | obj->fence_reg);
+	I915_WRITE(ILK_DPFC_CHICKEN, DPFC_HT_MODIFY);
+
+	I915_WRITE(ILK_DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
+		   (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
+		   (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
+	I915_WRITE(ILK_DPFC_FENCE_YOFF, crtc->y);
+	I915_WRITE(ILK_FBC_RT_BASE, obj->gtt_offset | ILK_FBC_RT_VALID);
+	/* enable it... */
+	I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN);
+
+	if (IS_GEN6(dev)) {
+		I915_WRITE(SNB_DPFC_CTL_SA,
+			   SNB_CPU_FENCE_ENABLE | obj->fence_reg);
+		I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y);
+		sandybridge_blit_fbc_update(dev);
+	}
+
+	DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
+}
+
+static void ironlake_disable_fbc(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dpfc_ctl;
+
+	/* Disable compression */
+	dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
+	if (dpfc_ctl & DPFC_CTL_EN) {
+		dpfc_ctl &= ~DPFC_CTL_EN;
+		I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);
+
+		DRM_DEBUG_KMS("disabled FBC\n");
+	}
+}
+
+static bool ironlake_fbc_enabled(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	return I915_READ(ILK_DPFC_CONTROL) & DPFC_CTL_EN;
+}
+
+bool intel_fbc_enabled(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (!dev_priv->display.fbc_enabled)
+		return false;
+
+	return dev_priv->display.fbc_enabled(dev);
+}
+
+static void intel_fbc_work_fn(struct work_struct *__work)
+{
+	struct intel_fbc_work *work =
+		container_of(to_delayed_work(__work),
+			     struct intel_fbc_work, work);
+	struct drm_device *dev = work->crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	mutex_lock(&dev->struct_mutex);
+	if (work == dev_priv->fbc_work) {
+		/* Double check that we haven't switched fb without cancelling
+		 * the prior work.
+		 */
+		if (work->crtc->fb == work->fb) {
+			dev_priv->display.enable_fbc(work->crtc,
+						     work->interval);
+
+			dev_priv->cfb_plane = to_intel_crtc(work->crtc)->plane;
+			dev_priv->cfb_fb = work->crtc->fb->base.id;
+			dev_priv->cfb_y = work->crtc->y;
+		}
+
+		dev_priv->fbc_work = NULL;
+	}
+	mutex_unlock(&dev->struct_mutex);
+
+	kfree(work);
+}
+
+static void intel_cancel_fbc_work(struct drm_i915_private *dev_priv)
+{
+	if (dev_priv->fbc_work == NULL)
+		return;
+
+	DRM_DEBUG_KMS("cancelling pending FBC enable\n");
+
+	/* Synchronisation is provided by struct_mutex and checking of
+	 * dev_priv->fbc_work, so we can perform the cancellation
+	 * entirely asynchronously.
+	 */
+	if (cancel_delayed_work(&dev_priv->fbc_work->work))
+		/* tasklet was killed before being run, clean up */
+		kfree(dev_priv->fbc_work);
+
+	/* Mark the work as no longer wanted so that if it does
+	 * wake-up (because the work was already running and waiting
+	 * for our mutex), it will discover that is no longer
+	 * necessary to run.
+	 */
+	dev_priv->fbc_work = NULL;
+}
+
+static void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+	struct intel_fbc_work *work;
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (!dev_priv->display.enable_fbc)
+		return;
+
+	intel_cancel_fbc_work(dev_priv);
+
+	work = kzalloc(sizeof *work, GFP_KERNEL);
+	if (work == NULL) {
+		dev_priv->display.enable_fbc(crtc, interval);
+		return;
+	}
+
+	work->crtc = crtc;
+	work->fb = crtc->fb;
+	work->interval = interval;
+	INIT_DELAYED_WORK(&work->work, intel_fbc_work_fn);
+
+	dev_priv->fbc_work = work;
+
+	DRM_DEBUG_KMS("scheduling delayed FBC enable\n");
+
+	/* Delay the actual enabling to let pageflipping cease and the
+	 * display to settle before starting the compression. Note that
+	 * this delay also serves a second purpose: it allows for a
+	 * vblank to pass after disabling the FBC before we attempt
+	 * to modify the control registers.
+	 *
+	 * A more complicated solution would involve tracking vblanks
+	 * following the termination of the page-flipping sequence
+	 * and indeed performing the enable as a co-routine and not
+	 * waiting synchronously upon the vblank.
+	 */
+	schedule_delayed_work(&work->work, msecs_to_jiffies(50));
+}
+
+void intel_disable_fbc(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	intel_cancel_fbc_work(dev_priv);
+
+	if (!dev_priv->display.disable_fbc)
+		return;
+
+	dev_priv->display.disable_fbc(dev);
+	dev_priv->cfb_plane = -1;
+}
+
+/**
+ * intel_update_fbc - enable/disable FBC as needed
+ * @dev: the drm_device
+ *
+ * Set up the framebuffer compression hardware at mode set time.  We
+ * enable it if possible:
+ *   - plane A only (on pre-965)
+ *   - no pixel mulitply/line duplication
+ *   - no alpha buffer discard
+ *   - no dual wide
+ *   - framebuffer <= 2048 in width, 1536 in height
+ *
+ * We can't assume that any compression will take place (worst case),
+ * so the compressed buffer has to be the same size as the uncompressed
+ * one.  It also must reside (along with the line length buffer) in
+ * stolen memory.
+ *
+ * We need to enable/disable FBC on a global basis.
+ */
+static void intel_update_fbc(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = NULL, *tmp_crtc;
+	struct intel_crtc *intel_crtc;
+	struct drm_framebuffer *fb;
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj;
+	int enable_fbc;
+
+	DRM_DEBUG_KMS("\n");
+
+	if (!i915_powersave)
+		return;
+
+	if (!I915_HAS_FBC(dev))
+		return;
+
+	/*
+	 * If FBC is already on, we just have to verify that we can
+	 * keep it that way...
+	 * Need to disable if:
+	 *   - more than one pipe is active
+	 *   - changing FBC params (stride, fence, mode)
+	 *   - new fb is too large to fit in compressed buffer
+	 *   - going to an unsupported config (interlace, pixel multiply, etc.)
+	 */
+	list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
+		if (tmp_crtc->enabled && tmp_crtc->fb) {
+			if (crtc) {
+				DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
+				dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
+				goto out_disable;
+			}
+			crtc = tmp_crtc;
+		}
+	}
+
+	if (!crtc || crtc->fb == NULL) {
+		DRM_DEBUG_KMS("no output, disabling\n");
+		dev_priv->no_fbc_reason = FBC_NO_OUTPUT;
+		goto out_disable;
+	}
+
+	intel_crtc = to_intel_crtc(crtc);
+	fb = crtc->fb;
+	intel_fb = to_intel_framebuffer(fb);
+	obj = intel_fb->obj;
+
+	enable_fbc = i915_enable_fbc;
+	if (enable_fbc < 0) {
+		DRM_DEBUG_KMS("fbc set to per-chip default\n");
+		enable_fbc = 1;
+		if (INTEL_INFO(dev)->gen <= 6)
+			enable_fbc = 0;
+	}
+	if (!enable_fbc) {
+		DRM_DEBUG_KMS("fbc disabled per module param\n");
+		dev_priv->no_fbc_reason = FBC_MODULE_PARAM;
+		goto out_disable;
+	}
+	if (intel_fb->obj->base.size > dev_priv->cfb_size) {
+		DRM_DEBUG_KMS("framebuffer too large, disabling "
+			      "compression\n");
+		dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
+		goto out_disable;
+	}
+	if ((crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) ||
+	    (crtc->mode.flags & DRM_MODE_FLAG_DBLSCAN)) {
+		DRM_DEBUG_KMS("mode incompatible with compression, "
+			      "disabling\n");
+		dev_priv->no_fbc_reason = FBC_UNSUPPORTED_MODE;
+		goto out_disable;
+	}
+	if ((crtc->mode.hdisplay > 2048) ||
+	    (crtc->mode.vdisplay > 1536)) {
+		DRM_DEBUG_KMS("mode too large for compression, disabling\n");
+		dev_priv->no_fbc_reason = FBC_MODE_TOO_LARGE;
+		goto out_disable;
+	}
+	if ((IS_I915GM(dev) || IS_I945GM(dev)) && intel_crtc->plane != 0) {
+		DRM_DEBUG_KMS("plane not 0, disabling compression\n");
+		dev_priv->no_fbc_reason = FBC_BAD_PLANE;
+		goto out_disable;
+	}
+
+	/* The use of a CPU fence is mandatory in order to detect writes
+	 * by the CPU to the scanout and trigger updates to the FBC.
+	 */
+	if (obj->tiling_mode != I915_TILING_X ||
+	    obj->fence_reg == I915_FENCE_REG_NONE) {
+		DRM_DEBUG_KMS("framebuffer not tiled or fenced, disabling compression\n");
+		dev_priv->no_fbc_reason = FBC_NOT_TILED;
+		goto out_disable;
+	}
+
+	/* If the kernel debugger is active, always disable compression */
+	if (in_dbg_master())
+		goto out_disable;
+
+	/* If the scanout has not changed, don't modify the FBC settings.
+	 * Note that we make the fundamental assumption that the fb->obj
+	 * cannot be unpinned (and have its GTT offset and fence revoked)
+	 * without first being decoupled from the scanout and FBC disabled.
+	 */
+	if (dev_priv->cfb_plane == intel_crtc->plane &&
+	    dev_priv->cfb_fb == fb->base.id &&
+	    dev_priv->cfb_y == crtc->y)
+		return;
+
+	if (intel_fbc_enabled(dev)) {
+		/* We update FBC along two paths, after changing fb/crtc
+		 * configuration (modeswitching) and after page-flipping
+		 * finishes. For the latter, we know that not only did
+		 * we disable the FBC at the start of the page-flip
+		 * sequence, but also more than one vblank has passed.
+		 *
+		 * For the former case of modeswitching, it is possible
+		 * to switch between two FBC valid configurations
+		 * instantaneously so we do need to disable the FBC
+		 * before we can modify its control registers. We also
+		 * have to wait for the next vblank for that to take
+		 * effect. However, since we delay enabling FBC we can
+		 * assume that a vblank has passed since disabling and
+		 * that we can safely alter the registers in the deferred
+		 * callback.
+		 *
+		 * In the scenario that we go from a valid to invalid
+		 * and then back to valid FBC configuration we have
+		 * no strict enforcement that a vblank occurred since
+		 * disabling the FBC. However, along all current pipe
+		 * disabling paths we do need to wait for a vblank at
+		 * some point. And we wait before enabling FBC anyway.
+		 */
+		DRM_DEBUG_KMS("disabling active FBC for update\n");
+		intel_disable_fbc(dev);
+	}
+
+	intel_enable_fbc(crtc, 500);
+	return;
+
+out_disable:
+	/* Multiple disables should be harmless */
+	if (intel_fbc_enabled(dev)) {
+		DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
+		intel_disable_fbc(dev);
+	}
+}
+
+int
+intel_pin_and_fence_fb_obj(struct drm_device *dev,
+			   struct drm_i915_gem_object *obj,
+			   struct intel_ring_buffer *pipelined)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 alignment;
+	int ret;
+
+	switch (obj->tiling_mode) {
+	case I915_TILING_NONE:
+		if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
+			alignment = 128 * 1024;
+		else if (INTEL_INFO(dev)->gen >= 4)
+			alignment = 4 * 1024;
+		else
+			alignment = 64 * 1024;
+		break;
+	case I915_TILING_X:
+		/* pin() will align the object as required by fence */
+		alignment = 0;
+		break;
+	case I915_TILING_Y:
+		/* FIXME: Is this true? */
+		DRM_ERROR("Y tiled not allowed for scan out buffers\n");
+		return -EINVAL;
+	default:
+		BUG();
+	}
+
+	dev_priv->mm.interruptible = false;
+	ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
+	if (ret)
+		goto err_interruptible;
+
+	/* Install a fence for tiled scan-out. Pre-i965 always needs a
+	 * fence, whereas 965+ only requires a fence if using
+	 * framebuffer compression.  For simplicity, we always install
+	 * a fence as the cost is not that onerous.
+	 */
+	if (obj->tiling_mode != I915_TILING_NONE) {
+		ret = i915_gem_object_get_fence(obj, pipelined);
+		if (ret)
+			goto err_unpin;
+
+		i915_gem_object_pin_fence(obj);
+	}
+
+	dev_priv->mm.interruptible = true;
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err_interruptible:
+	dev_priv->mm.interruptible = true;
+	return ret;
+}
+
+void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
+{
+	i915_gem_object_unpin_fence(obj);
+	i915_gem_object_unpin(obj);
+}
+
+static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
+			     int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj;
+	int plane = intel_crtc->plane;
+	unsigned long Start, Offset;
+	u32 dspcntr;
+	u32 reg;
+
+	switch (plane) {
+	case 0:
+	case 1:
+		break;
+	default:
+		DRM_ERROR("Can't update plane %d in SAREA\n", plane);
+		return -EINVAL;
+	}
+
+	intel_fb = to_intel_framebuffer(fb);
+	obj = intel_fb->obj;
+
+	reg = DSPCNTR(plane);
+	dspcntr = I915_READ(reg);
+	/* Mask out pixel format bits in case we change it */
+	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+	switch (fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (fb->depth == 15)
+			dspcntr |= DISPPLANE_15_16BPP;
+		else
+			dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 24:
+	case 32:
+		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		break;
+	default:
+		DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
+		return -EINVAL;
+	}
+	if (INTEL_INFO(dev)->gen >= 4) {
+		if (obj->tiling_mode != I915_TILING_NONE)
+			dspcntr |= DISPPLANE_TILED;
+		else
+			dspcntr &= ~DISPPLANE_TILED;
+	}
+
+	I915_WRITE(reg, dspcntr);
+
+	Start = obj->gtt_offset;
+	Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
+
+	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
+		      Start, Offset, x, y, fb->pitches[0]);
+	I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
+	if (INTEL_INFO(dev)->gen >= 4) {
+		I915_WRITE(DSPSURF(plane), Start);
+		I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
+		I915_WRITE(DSPADDR(plane), Offset);
+	} else
+		I915_WRITE(DSPADDR(plane), Start + Offset);
+	POSTING_READ(reg);
+
+	return 0;
+}
+
+static int ironlake_update_plane(struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb, int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj;
+	int plane = intel_crtc->plane;
+	unsigned long Start, Offset;
+	u32 dspcntr;
+	u32 reg;
+
+	switch (plane) {
+	case 0:
+	case 1:
+	case 2:
+		break;
+	default:
+		DRM_ERROR("Can't update plane %d in SAREA\n", plane);
+		return -EINVAL;
+	}
+
+	intel_fb = to_intel_framebuffer(fb);
+	obj = intel_fb->obj;
+
+	reg = DSPCNTR(plane);
+	dspcntr = I915_READ(reg);
+	/* Mask out pixel format bits in case we change it */
+	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+	switch (fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (fb->depth != 16)
+			return -EINVAL;
+
+		dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 24:
+	case 32:
+		if (fb->depth == 24)
+			dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		else if (fb->depth == 30)
+			dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA;
+		else
+			return -EINVAL;
+		break;
+	default:
+		DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	if (obj->tiling_mode != I915_TILING_NONE)
+		dspcntr |= DISPPLANE_TILED;
+	else
+		dspcntr &= ~DISPPLANE_TILED;
+
+	/* must disable */
+	dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
+
+	I915_WRITE(reg, dspcntr);
+
+	Start = obj->gtt_offset;
+	Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
+
+	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
+		      Start, Offset, x, y, fb->pitches[0]);
+	I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
+	I915_WRITE(DSPSURF(plane), Start);
+	I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
+	I915_WRITE(DSPADDR(plane), Offset);
+	POSTING_READ(reg);
+
+	return 0;
+}
+
+/* Assume fb object is pinned & idle & fenced and just update base pointers */
+static int
+intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
+			   int x, int y, enum mode_set_atomic state)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = dev_priv->display.update_plane(crtc, fb, x, y);
+	if (ret)
+		return ret;
+
+	intel_update_fbc(dev);
+	intel_increase_pllclock(crtc);
+
+	return 0;
+}
+
+static int
+intel_finish_fb(struct drm_framebuffer *old_fb)
+{
+	struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
+	struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
+	bool was_interruptible = dev_priv->mm.interruptible;
+	int ret;
+
+	wait_event(dev_priv->pending_flip_queue,
+		   atomic_read(&dev_priv->mm.wedged) ||
+		   atomic_read(&obj->pending_flip) == 0);
+
+	/* Big Hammer, we also need to ensure that any pending
+	 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
+	 * current scanout is retired before unpinning the old
+	 * framebuffer.
+	 *
+	 * This should only fail upon a hung GPU, in which case we
+	 * can safely continue.
+	 */
+	dev_priv->mm.interruptible = false;
+	ret = i915_gem_object_finish_gpu(obj);
+	dev_priv->mm.interruptible = was_interruptible;
+
+	return ret;
+}
+
+static int
+intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
+		    struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_master_private *master_priv;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int ret;
+
+	/* no fb bound */
+	if (!crtc->fb) {
+		DRM_ERROR("No FB bound\n");
+		return 0;
+	}
+
+	switch (intel_crtc->plane) {
+	case 0:
+	case 1:
+		break;
+	case 2:
+		if (IS_IVYBRIDGE(dev))
+			break;
+		/* fall through otherwise */
+	default:
+		DRM_ERROR("no plane for crtc\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&dev->struct_mutex);
+	ret = intel_pin_and_fence_fb_obj(dev,
+					 to_intel_framebuffer(crtc->fb)->obj,
+					 NULL);
+	if (ret != 0) {
+		mutex_unlock(&dev->struct_mutex);
+		DRM_ERROR("pin & fence failed\n");
+		return ret;
+	}
+
+	if (old_fb)
+		intel_finish_fb(old_fb);
+
+	ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
+					 LEAVE_ATOMIC_MODE_SET);
+	if (ret) {
+		intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
+		mutex_unlock(&dev->struct_mutex);
+		DRM_ERROR("failed to update base address\n");
+		return ret;
+	}
+
+	if (old_fb) {
+		intel_wait_for_vblank(dev, intel_crtc->pipe);
+		intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	if (!dev->primary->master)
+		return 0;
+
+	master_priv = dev->primary->master->driver_priv;
+	if (!master_priv->sarea_priv)
+		return 0;
+
+	if (intel_crtc->pipe) {
+		master_priv->sarea_priv->pipeB_x = x;
+		master_priv->sarea_priv->pipeB_y = y;
+	} else {
+		master_priv->sarea_priv->pipeA_x = x;
+		master_priv->sarea_priv->pipeA_y = y;
+	}
+
+	return 0;
+}
+
+static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dpa_ctl;
+
+	DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
+	dpa_ctl = I915_READ(DP_A);
+	dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+	if (clock < 200000) {
+		u32 temp;
+		dpa_ctl |= DP_PLL_FREQ_160MHZ;
+		/* workaround for 160Mhz:
+		   1) program 0x4600c bits 15:0 = 0x8124
+		   2) program 0x46010 bit 0 = 1
+		   3) program 0x46034 bit 24 = 1
+		   4) program 0x64000 bit 14 = 1
+		   */
+		temp = I915_READ(0x4600c);
+		temp &= 0xffff0000;
+		I915_WRITE(0x4600c, temp | 0x8124);
+
+		temp = I915_READ(0x46010);
+		I915_WRITE(0x46010, temp | 1);
+
+		temp = I915_READ(0x46034);
+		I915_WRITE(0x46034, temp | (1 << 24));
+	} else {
+		dpa_ctl |= DP_PLL_FREQ_270MHZ;
+	}
+	I915_WRITE(DP_A, dpa_ctl);
+
+	POSTING_READ(DP_A);
+	udelay(500);
+}
+
+static void intel_fdi_normal_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+	/* enable normal train */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (IS_IVYBRIDGE(dev)) {
+		temp &= ~FDI_LINK_TRAIN_NONE_IVB;
+		temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
+	}
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_NORMAL_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_NONE;
+	}
+	I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
+
+	/* wait one idle pattern time */
+	POSTING_READ(reg);
+	udelay(1000);
+
+	/* IVB wants error correction enabled */
+	if (IS_IVYBRIDGE(dev))
+		I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
+			   FDI_FE_ERRC_ENABLE);
+}
+
+static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 flags = I915_READ(SOUTH_CHICKEN1);
+
+	flags |= FDI_PHASE_SYNC_OVR(pipe);
+	I915_WRITE(SOUTH_CHICKEN1, flags); /* once to unlock... */
+	flags |= FDI_PHASE_SYNC_EN(pipe);
+	I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to enable */
+	POSTING_READ(SOUTH_CHICKEN1);
+}
+
+/* The FDI link training functions for ILK/Ibexpeak. */
+static void ironlake_fdi_link_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	u32 reg, temp, tries;
+
+	/* FDI needs bits from pipe & plane first */
+	assert_pipe_enabled(dev_priv, pipe);
+	assert_plane_enabled(dev_priv, plane);
+
+	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+	   for train result */
+	reg = FDI_RX_IMR(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_RX_SYMBOL_LOCK;
+	temp &= ~FDI_RX_BIT_LOCK;
+	I915_WRITE(reg, temp);
+	I915_READ(reg);
+	udelay(150);
+
+	/* enable CPU FDI TX and PCH FDI RX */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~(7 << 19);
+	temp |= (intel_crtc->fdi_lanes - 1) << 19;
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_1;
+	I915_WRITE(reg, temp | FDI_TX_ENABLE);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_1;
+	I915_WRITE(reg, temp | FDI_RX_ENABLE);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	/* Ironlake workaround, enable clock pointer after FDI enable*/
+	if (HAS_PCH_IBX(dev)) {
+		I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
+		I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
+			   FDI_RX_PHASE_SYNC_POINTER_EN);
+	}
+
+	reg = FDI_RX_IIR(pipe);
+	for (tries = 0; tries < 5; tries++) {
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if ((temp & FDI_RX_BIT_LOCK)) {
+			DRM_DEBUG_KMS("FDI train 1 done.\n");
+			I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+			break;
+		}
+	}
+	if (tries == 5)
+		DRM_ERROR("FDI train 1 fail!\n");
+
+	/* Train 2 */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_2;
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_2;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	reg = FDI_RX_IIR(pipe);
+	for (tries = 0; tries < 5; tries++) {
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if (temp & FDI_RX_SYMBOL_LOCK) {
+			I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+			DRM_DEBUG_KMS("FDI train 2 done.\n");
+			break;
+		}
+	}
+	if (tries == 5)
+		DRM_ERROR("FDI train 2 fail!\n");
+
+	DRM_DEBUG_KMS("FDI train done\n");
+
+}
+
+static const int snb_b_fdi_train_param[] = {
+	FDI_LINK_TRAIN_400MV_0DB_SNB_B,
+	FDI_LINK_TRAIN_400MV_6DB_SNB_B,
+	FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
+	FDI_LINK_TRAIN_800MV_0DB_SNB_B,
+};
+
+/* The FDI link training functions for SNB/Cougarpoint. */
+static void gen6_fdi_link_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp, i;
+
+	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+	   for train result */
+	reg = FDI_RX_IMR(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_RX_SYMBOL_LOCK;
+	temp &= ~FDI_RX_BIT_LOCK;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	/* enable CPU FDI TX and PCH FDI RX */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~(7 << 19);
+	temp |= (intel_crtc->fdi_lanes - 1) << 19;
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_1;
+	temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+	/* SNB-B */
+	temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+	I915_WRITE(reg, temp | FDI_TX_ENABLE);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+	}
+	I915_WRITE(reg, temp | FDI_RX_ENABLE);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	if (HAS_PCH_CPT(dev))
+		cpt_phase_pointer_enable(dev, pipe);
+
+	for (i = 0; i < 4; i++) {
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		temp |= snb_b_fdi_train_param[i];
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		udelay(500);
+
+		reg = FDI_RX_IIR(pipe);
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if (temp & FDI_RX_BIT_LOCK) {
+			I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+			DRM_DEBUG_KMS("FDI train 1 done.\n");
+			break;
+		}
+	}
+	if (i == 4)
+		DRM_ERROR("FDI train 1 fail!\n");
+
+	/* Train 2 */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_2;
+	if (IS_GEN6(dev)) {
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		/* SNB-B */
+		temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+	}
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_2;
+	}
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	for (i = 0; i < 4; i++) {
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		temp |= snb_b_fdi_train_param[i];
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		udelay(500);
+
+		reg = FDI_RX_IIR(pipe);
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if (temp & FDI_RX_SYMBOL_LOCK) {
+			I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+			DRM_DEBUG_KMS("FDI train 2 done.\n");
+			break;
+		}
+	}
+	if (i == 4)
+		DRM_ERROR("FDI train 2 fail!\n");
+
+	DRM_DEBUG_KMS("FDI train done.\n");
+}
+
+/* Manual link training for Ivy Bridge A0 parts */
+static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp, i;
+
+	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+	   for train result */
+	reg = FDI_RX_IMR(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_RX_SYMBOL_LOCK;
+	temp &= ~FDI_RX_BIT_LOCK;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	/* enable CPU FDI TX and PCH FDI RX */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~(7 << 19);
+	temp |= (intel_crtc->fdi_lanes - 1) << 19;
+	temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
+	temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
+	temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+	temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+	temp |= FDI_COMPOSITE_SYNC;
+	I915_WRITE(reg, temp | FDI_TX_ENABLE);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_AUTO;
+	temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+	temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+	temp |= FDI_COMPOSITE_SYNC;
+	I915_WRITE(reg, temp | FDI_RX_ENABLE);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	if (HAS_PCH_CPT(dev))
+		cpt_phase_pointer_enable(dev, pipe);
+
+	for (i = 0; i < 4; i++) {
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		temp |= snb_b_fdi_train_param[i];
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		udelay(500);
+
+		reg = FDI_RX_IIR(pipe);
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if (temp & FDI_RX_BIT_LOCK ||
+		    (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
+			I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+			DRM_DEBUG_KMS("FDI train 1 done.\n");
+			break;
+		}
+	}
+	if (i == 4)
+		DRM_ERROR("FDI train 1 fail!\n");
+
+	/* Train 2 */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE_IVB;
+	temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
+	temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+	temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+	temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	udelay(150);
+
+	for (i = 0; i < 4; i++) {
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		temp |= snb_b_fdi_train_param[i];
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		udelay(500);
+
+		reg = FDI_RX_IIR(pipe);
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if (temp & FDI_RX_SYMBOL_LOCK) {
+			I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+			DRM_DEBUG_KMS("FDI train 2 done.\n");
+			break;
+		}
+	}
+	if (i == 4)
+		DRM_ERROR("FDI train 2 fail!\n");
+
+	DRM_DEBUG_KMS("FDI train done.\n");
+}
+
+static void ironlake_fdi_pll_enable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+	/* Write the TU size bits so error detection works */
+	I915_WRITE(FDI_RX_TUSIZE1(pipe),
+		   I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
+
+	/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~((0x7 << 19) | (0x7 << 16));
+	temp |= (intel_crtc->fdi_lanes - 1) << 19;
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
+
+	POSTING_READ(reg);
+	udelay(200);
+
+	/* Switch from Rawclk to PCDclk */
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp | FDI_PCDCLK);
+
+	POSTING_READ(reg);
+	udelay(200);
+
+	/* Enable CPU FDI TX PLL, always on for Ironlake */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+		I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
+
+		POSTING_READ(reg);
+		udelay(100);
+	}
+}
+
+static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 flags = I915_READ(SOUTH_CHICKEN1);
+
+	flags &= ~(FDI_PHASE_SYNC_EN(pipe));
+	I915_WRITE(SOUTH_CHICKEN1, flags); /* once to disable... */
+	flags &= ~(FDI_PHASE_SYNC_OVR(pipe));
+	I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to lock */
+	POSTING_READ(SOUTH_CHICKEN1);
+}
+static void ironlake_fdi_disable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+	/* disable CPU FDI tx and PCH FDI rx */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
+	POSTING_READ(reg);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~(0x7 << 16);
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
+
+	POSTING_READ(reg);
+	udelay(100);
+
+	/* Ironlake workaround, disable clock pointer after downing FDI */
+	if (HAS_PCH_IBX(dev)) {
+		I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
+		I915_WRITE(FDI_RX_CHICKEN(pipe),
+			   I915_READ(FDI_RX_CHICKEN(pipe) &
+				     ~FDI_RX_PHASE_SYNC_POINTER_EN));
+	} else if (HAS_PCH_CPT(dev)) {
+		cpt_phase_pointer_disable(dev, pipe);
+	}
+
+	/* still set train pattern 1 */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_1;
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+	}
+	/* BPC in FDI rx is consistent with that in PIPECONF */
+	temp &= ~(0x07 << 16);
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	udelay(100);
+}
+
+/*
+ * When we disable a pipe, we need to clear any pending scanline wait events
+ * to avoid hanging the ring, which we assume we are waiting on.
+ */
+static void intel_clear_scanline_wait(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring;
+	u32 tmp;
+
+	if (IS_GEN2(dev))
+		/* Can't break the hang on i8xx */
+		return;
+
+	ring = LP_RING(dev_priv);
+	tmp = I915_READ_CTL(ring);
+	if (tmp & RING_WAIT)
+		I915_WRITE_CTL(ring, tmp);
+}
+
+static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
+{
+	struct drm_i915_gem_object *obj;
+	struct drm_i915_private *dev_priv;
+
+	if (crtc->fb == NULL)
+		return;
+
+	obj = to_intel_framebuffer(crtc->fb)->obj;
+	dev_priv = crtc->dev->dev_private;
+	wait_event(dev_priv->pending_flip_queue,
+		   atomic_read(&obj->pending_flip) == 0);
+}
+
+static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+
+	/*
+	 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
+	 * must be driven by its own crtc; no sharing is possible.
+	 */
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+		if (encoder->base.crtc != crtc)
+			continue;
+
+		switch (encoder->type) {
+		case INTEL_OUTPUT_EDP:
+			if (!intel_encoder_is_pch_edp(&encoder->base))
+				return false;
+			continue;
+		}
+	}
+
+	return true;
+}
+
+/*
+ * Enable PCH resources required for PCH ports:
+ *   - PCH PLLs
+ *   - FDI training & RX/TX
+ *   - update transcoder timings
+ *   - DP transcoding bits
+ *   - transcoder
+ */
+static void ironlake_pch_enable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp, transc_sel;
+
+	/* For PCH output, training FDI link */
+	dev_priv->display.fdi_link_train(crtc);
+
+	intel_enable_pch_pll(dev_priv, pipe);
+
+	if (HAS_PCH_CPT(dev)) {
+		transc_sel = intel_crtc->use_pll_a ? TRANSC_DPLLA_SEL :
+			TRANSC_DPLLB_SEL;
+
+		/* Be sure PCH DPLL SEL is set */
+		temp = I915_READ(PCH_DPLL_SEL);
+		if (pipe == 0) {
+			temp &= ~(TRANSA_DPLLB_SEL);
+			temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
+		} else if (pipe == 1) {
+			temp &= ~(TRANSB_DPLLB_SEL);
+			temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
+		} else if (pipe == 2) {
+			temp &= ~(TRANSC_DPLLB_SEL);
+			temp |= (TRANSC_DPLL_ENABLE | transc_sel);
+		}
+		I915_WRITE(PCH_DPLL_SEL, temp);
+	}
+
+	/* set transcoder timing, panel must allow it */
+	assert_panel_unlocked(dev_priv, pipe);
+	I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
+	I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
+	I915_WRITE(TRANS_HSYNC(pipe),  I915_READ(HSYNC(pipe)));
+
+	I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
+	I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
+	I915_WRITE(TRANS_VSYNC(pipe),  I915_READ(VSYNC(pipe)));
+	I915_WRITE(TRANS_VSYNCSHIFT(pipe),  I915_READ(VSYNCSHIFT(pipe)));
+
+	intel_fdi_normal_train(crtc);
+
+	/* For PCH DP, enable TRANS_DP_CTL */
+	if (HAS_PCH_CPT(dev) &&
+	    (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+	     intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
+		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
+		reg = TRANS_DP_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~(TRANS_DP_PORT_SEL_MASK |
+			  TRANS_DP_SYNC_MASK |
+			  TRANS_DP_BPC_MASK);
+		temp |= (TRANS_DP_OUTPUT_ENABLE |
+			 TRANS_DP_ENH_FRAMING);
+		temp |= bpc << 9; /* same format but at 11:9 */
+
+		if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
+			temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
+		if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
+			temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
+
+		switch (intel_trans_dp_port_sel(crtc)) {
+		case PCH_DP_B:
+			temp |= TRANS_DP_PORT_SEL_B;
+			break;
+		case PCH_DP_C:
+			temp |= TRANS_DP_PORT_SEL_C;
+			break;
+		case PCH_DP_D:
+			temp |= TRANS_DP_PORT_SEL_D;
+			break;
+		default:
+			DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
+			temp |= TRANS_DP_PORT_SEL_B;
+			break;
+		}
+
+		I915_WRITE(reg, temp);
+	}
+
+	intel_enable_transcoder(dev_priv, pipe);
+}
+
+void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int dslreg = PIPEDSL(pipe), tc2reg = TRANS_CHICKEN2(pipe);
+	u32 temp;
+
+	temp = I915_READ(dslreg);
+	udelay(500);
+	if (wait_for(I915_READ(dslreg) != temp, 5)) {
+		/* Without this, mode sets may fail silently on FDI */
+		I915_WRITE(tc2reg, TRANS_AUTOTRAIN_GEN_STALL_DIS);
+		udelay(250);
+		I915_WRITE(tc2reg, 0);
+		if (wait_for(I915_READ(dslreg) != temp, 5))
+			DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
+	}
+}
+
+static void ironlake_crtc_enable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	u32 temp;
+	bool is_pch_port;
+
+	if (intel_crtc->active)
+		return;
+
+	intel_crtc->active = true;
+	intel_update_watermarks(dev);
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		temp = I915_READ(PCH_LVDS);
+		if ((temp & LVDS_PORT_EN) == 0)
+			I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
+	}
+
+	is_pch_port = intel_crtc_driving_pch(crtc);
+
+	if (is_pch_port)
+		ironlake_fdi_pll_enable(crtc);
+	else
+		ironlake_fdi_disable(crtc);
+
+	/* Enable panel fitting for LVDS */
+	if (dev_priv->pch_pf_size &&
+	    (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) {
+		/* Force use of hard-coded filter coefficients
+		 * as some pre-programmed values are broken,
+		 * e.g. x201.
+		 */
+		I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
+		I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
+		I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
+	}
+
+	/*
+	 * On ILK+ LUT must be loaded before the pipe is running but with
+	 * clocks enabled
+	 */
+	intel_crtc_load_lut(crtc);
+
+	intel_enable_pipe(dev_priv, pipe, is_pch_port);
+	intel_enable_plane(dev_priv, plane, pipe);
+
+	if (is_pch_port)
+		ironlake_pch_enable(crtc);
+
+	mutex_lock(&dev->struct_mutex);
+	intel_update_fbc(dev);
+	mutex_unlock(&dev->struct_mutex);
+
+	intel_crtc_update_cursor(crtc, true);
+}
+
+static void ironlake_crtc_disable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	u32 reg, temp;
+
+	if (!intel_crtc->active)
+		return;
+
+	intel_crtc_wait_for_pending_flips(crtc);
+	drm_vblank_off(dev, pipe);
+	intel_crtc_update_cursor(crtc, false);
+
+	intel_disable_plane(dev_priv, plane, pipe);
+
+	if (dev_priv->cfb_plane == plane)
+		intel_disable_fbc(dev);
+
+	intel_disable_pipe(dev_priv, pipe);
+
+	/* Disable PF */
+	I915_WRITE(PF_CTL(pipe), 0);
+	I915_WRITE(PF_WIN_SZ(pipe), 0);
+
+	ironlake_fdi_disable(crtc);
+
+	/* This is a horrible layering violation; we should be doing this in
+	 * the connector/encoder ->prepare instead, but we don't always have
+	 * enough information there about the config to know whether it will
+	 * actually be necessary or just cause undesired flicker.
+	 */
+	intel_disable_pch_ports(dev_priv, pipe);
+
+	intel_disable_transcoder(dev_priv, pipe);
+
+	if (HAS_PCH_CPT(dev)) {
+		/* disable TRANS_DP_CTL */
+		reg = TRANS_DP_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
+		temp |= TRANS_DP_PORT_SEL_NONE;
+		I915_WRITE(reg, temp);
+
+		/* disable DPLL_SEL */
+		temp = I915_READ(PCH_DPLL_SEL);
+		switch (pipe) {
+		case 0:
+			temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
+			break;
+		case 1:
+			temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
+			break;
+		case 2:
+			/* C shares PLL A or B */
+			temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
+			break;
+		default:
+			BUG(); /* wtf */
+		}
+		I915_WRITE(PCH_DPLL_SEL, temp);
+	}
+
+	/* disable PCH DPLL */
+	if (!intel_crtc->no_pll)
+		intel_disable_pch_pll(dev_priv, pipe);
+
+	/* Switch from PCDclk to Rawclk */
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp & ~FDI_PCDCLK);
+
+	/* Disable CPU FDI TX PLL */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
+
+	POSTING_READ(reg);
+	udelay(100);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
+
+	/* Wait for the clocks to turn off. */
+	POSTING_READ(reg);
+	udelay(100);
+
+	intel_crtc->active = false;
+	intel_update_watermarks(dev);
+
+	mutex_lock(&dev->struct_mutex);
+	intel_update_fbc(dev);
+	intel_clear_scanline_wait(dev);
+	mutex_unlock(&dev->struct_mutex);
+}
+
+static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+	 */
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
+		ironlake_crtc_enable(crtc);
+		break;
+
+	case DRM_MODE_DPMS_OFF:
+		DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
+		ironlake_crtc_disable(crtc);
+		break;
+	}
+}
+
+static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
+{
+	if (!enable && intel_crtc->overlay) {
+		struct drm_device *dev = intel_crtc->base.dev;
+		struct drm_i915_private *dev_priv = dev->dev_private;
+
+		mutex_lock(&dev->struct_mutex);
+		dev_priv->mm.interruptible = false;
+		(void) intel_overlay_switch_off(intel_crtc->overlay);
+		dev_priv->mm.interruptible = true;
+		mutex_unlock(&dev->struct_mutex);
+	}
+
+	/* Let userspace switch the overlay on again. In most cases userspace
+	 * has to recompute where to put it anyway.
+	 */
+}
+
+static void i9xx_crtc_enable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+
+	if (intel_crtc->active)
+		return;
+
+	intel_crtc->active = true;
+	intel_update_watermarks(dev);
+
+	intel_enable_pll(dev_priv, pipe);
+	intel_enable_pipe(dev_priv, pipe, false);
+	intel_enable_plane(dev_priv, plane, pipe);
+
+	intel_crtc_load_lut(crtc);
+	intel_update_fbc(dev);
+
+	/* Give the overlay scaler a chance to enable if it's on this pipe */
+	intel_crtc_dpms_overlay(intel_crtc, true);
+	intel_crtc_update_cursor(crtc, true);
+}
+
+static void i9xx_crtc_disable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+
+	if (!intel_crtc->active)
+		return;
+
+	/* Give the overlay scaler a chance to disable if it's on this pipe */
+	intel_crtc_wait_for_pending_flips(crtc);
+	drm_vblank_off(dev, pipe);
+	intel_crtc_dpms_overlay(intel_crtc, false);
+	intel_crtc_update_cursor(crtc, false);
+
+	if (dev_priv->cfb_plane == plane)
+		intel_disable_fbc(dev);
+
+	intel_disable_plane(dev_priv, plane, pipe);
+	intel_disable_pipe(dev_priv, pipe);
+	intel_disable_pll(dev_priv, pipe);
+
+	intel_crtc->active = false;
+	intel_update_fbc(dev);
+	intel_update_watermarks(dev);
+	intel_clear_scanline_wait(dev);
+}
+
+static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+	 */
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		i9xx_crtc_enable(crtc);
+		break;
+	case DRM_MODE_DPMS_OFF:
+		i9xx_crtc_disable(crtc);
+		break;
+	}
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ */
+static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_master_private *master_priv;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	bool enabled;
+
+	if (intel_crtc->dpms_mode == mode)
+		return;
+
+	intel_crtc->dpms_mode = mode;
+
+	dev_priv->display.dpms(crtc, mode);
+
+	if (!dev->primary->master)
+		return;
+
+	master_priv = dev->primary->master->driver_priv;
+	if (!master_priv->sarea_priv)
+		return;
+
+	enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+
+	switch (pipe) {
+	case 0:
+		master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
+		master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
+		break;
+	case 1:
+		master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
+		master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
+		break;
+	default:
+		DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
+		break;
+	}
+}
+
+static void intel_crtc_disable(struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	struct drm_device *dev = crtc->dev;
+
+	/* Flush any pending WAITs before we disable the pipe. Note that
+	 * we need to drop the struct_mutex in order to acquire it again
+	 * during the lowlevel dpms routines around a couple of the
+	 * operations. It does not look trivial nor desirable to move
+	 * that locking higher. So instead we leave a window for the
+	 * submission of further commands on the fb before we can actually
+	 * disable it. This race with userspace exists anyway, and we can
+	 * only rely on the pipe being disabled by userspace after it
+	 * receives the hotplug notification and has flushed any pending
+	 * batches.
+	 */
+	if (crtc->fb) {
+		mutex_lock(&dev->struct_mutex);
+		intel_finish_fb(crtc->fb);
+		mutex_unlock(&dev->struct_mutex);
+	}
+
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+	assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
+	assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
+
+	if (crtc->fb) {
+		mutex_lock(&dev->struct_mutex);
+		intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
+		mutex_unlock(&dev->struct_mutex);
+	}
+}
+
+/* Prepare for a mode set.
+ *
+ * Note we could be a lot smarter here.  We need to figure out which outputs
+ * will be enabled, which disabled (in short, how the config will changes)
+ * and perform the minimum necessary steps to accomplish that, e.g. updating
+ * watermarks, FBC configuration, making sure PLLs are programmed correctly,
+ * panel fitting is in the proper state, etc.
+ */
+static void i9xx_crtc_prepare(struct drm_crtc *crtc)
+{
+	i9xx_crtc_disable(crtc);
+}
+
+static void i9xx_crtc_commit(struct drm_crtc *crtc)
+{
+	i9xx_crtc_enable(crtc);
+}
+
+static void ironlake_crtc_prepare(struct drm_crtc *crtc)
+{
+	ironlake_crtc_disable(crtc);
+}
+
+static void ironlake_crtc_commit(struct drm_crtc *crtc)
+{
+	ironlake_crtc_enable(crtc);
+}
+
+void intel_encoder_prepare(struct drm_encoder *encoder)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+	/* lvds has its own version of prepare see intel_lvds_prepare */
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+void intel_encoder_commit(struct drm_encoder *encoder)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+	struct drm_device *dev = encoder->dev;
+	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+	struct intel_crtc *intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
+
+	/* lvds has its own version of commit see intel_lvds_commit */
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+
+	if (HAS_PCH_CPT(dev))
+		intel_cpt_verify_modeset(dev, intel_crtc->pipe);
+}
+
+void intel_encoder_destroy(struct drm_encoder *encoder)
+{
+	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+
+	drm_encoder_cleanup(encoder);
+	kfree(intel_encoder);
+}
+
+static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = crtc->dev;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		/* FDI link clock is fixed at 2.7G */
+		if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
+			return false;
+	}
+
+	/* All interlaced capable intel hw wants timings in frames. Note though
+	 * that intel_lvds_mode_fixup does some funny tricks with the crtc
+	 * timings, so we need to be careful not to clobber these.*/
+	if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET))
+		drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+	return true;
+}
+
+static int i945_get_display_clock_speed(struct drm_device *dev)
+{
+	return 400000;
+}
+
+static int i915_get_display_clock_speed(struct drm_device *dev)
+{
+	return 333000;
+}
+
+static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
+{
+	return 200000;
+}
+
+static int i915gm_get_display_clock_speed(struct drm_device *dev)
+{
+	u16 gcfgc = 0;
+
+	pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
+
+	if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
+		return 133000;
+	else {
+		switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
+		case GC_DISPLAY_CLOCK_333_MHZ:
+			return 333000;
+		default:
+		case GC_DISPLAY_CLOCK_190_200_MHZ:
+			return 190000;
+		}
+	}
+}
+
+static int i865_get_display_clock_speed(struct drm_device *dev)
+{
+	return 266000;
+}
+
+static int i855_get_display_clock_speed(struct drm_device *dev)
+{
+	u16 hpllcc = 0;
+	/* Assume that the hardware is in the high speed state.  This
+	 * should be the default.
+	 */
+	switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
+	case GC_CLOCK_133_200:
+	case GC_CLOCK_100_200:
+		return 200000;
+	case GC_CLOCK_166_250:
+		return 250000;
+	case GC_CLOCK_100_133:
+		return 133000;
+	}
+
+	/* Shouldn't happen */
+	return 0;
+}
+
+static int i830_get_display_clock_speed(struct drm_device *dev)
+{
+	return 133000;
+}
+
+struct fdi_m_n {
+	u32        tu;
+	u32        gmch_m;
+	u32        gmch_n;
+	u32        link_m;
+	u32        link_n;
+};
+
+static void
+fdi_reduce_ratio(u32 *num, u32 *den)
+{
+	while (*num > 0xffffff || *den > 0xffffff) {
+		*num >>= 1;
+		*den >>= 1;
+	}
+}
+
+static void
+ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
+		     int link_clock, struct fdi_m_n *m_n)
+{
+	m_n->tu = 64; /* default size */
+
+	/* BUG_ON(pixel_clock > INT_MAX / 36); */
+	m_n->gmch_m = bits_per_pixel * pixel_clock;
+	m_n->gmch_n = link_clock * nlanes * 8;
+	fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+
+	m_n->link_m = pixel_clock;
+	m_n->link_n = link_clock;
+	fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
+}
+
+
+struct intel_watermark_params {
+	unsigned long fifo_size;
+	unsigned long max_wm;
+	unsigned long default_wm;
+	unsigned long guard_size;
+	unsigned long cacheline_size;
+};
+
+/* Pineview has different values for various configs */
+static const struct intel_watermark_params pineview_display_wm = {
+	PINEVIEW_DISPLAY_FIFO,
+	PINEVIEW_MAX_WM,
+	PINEVIEW_DFT_WM,
+	PINEVIEW_GUARD_WM,
+	PINEVIEW_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params pineview_display_hplloff_wm = {
+	PINEVIEW_DISPLAY_FIFO,
+	PINEVIEW_MAX_WM,
+	PINEVIEW_DFT_HPLLOFF_WM,
+	PINEVIEW_GUARD_WM,
+	PINEVIEW_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params pineview_cursor_wm = {
+	PINEVIEW_CURSOR_FIFO,
+	PINEVIEW_CURSOR_MAX_WM,
+	PINEVIEW_CURSOR_DFT_WM,
+	PINEVIEW_CURSOR_GUARD_WM,
+	PINEVIEW_FIFO_LINE_SIZE,
+};
+static const struct intel_watermark_params pineview_cursor_hplloff_wm = {
+	PINEVIEW_CURSOR_FIFO,
+	PINEVIEW_CURSOR_MAX_WM,
+	PINEVIEW_CURSOR_DFT_WM,
+	PINEVIEW_CURSOR_GUARD_WM,
+	PINEVIEW_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params g4x_wm_info = {
+	G4X_FIFO_SIZE,
+	G4X_MAX_WM,
+	G4X_MAX_WM,
+	2,
+	G4X_FIFO_LINE_SIZE,
+};
+static const struct intel_watermark_params g4x_cursor_wm_info = {
+	I965_CURSOR_FIFO,
+	I965_CURSOR_MAX_WM,
+	I965_CURSOR_DFT_WM,
+	2,
+	G4X_FIFO_LINE_SIZE,
+};
+static const struct intel_watermark_params i965_cursor_wm_info = {
+	I965_CURSOR_FIFO,
+	I965_CURSOR_MAX_WM,
+	I965_CURSOR_DFT_WM,
+	2,
+	I915_FIFO_LINE_SIZE,
+};
+static const struct intel_watermark_params i945_wm_info = {
+	I945_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	2,
+	I915_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params i915_wm_info = {
+	I915_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	2,
+	I915_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params i855_wm_info = {
+	I855GM_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	2,
+	I830_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params i830_wm_info = {
+	I830_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	2,
+	I830_FIFO_LINE_SIZE
+};
+
+static const struct intel_watermark_params ironlake_display_wm_info = {
+	ILK_DISPLAY_FIFO,
+	ILK_DISPLAY_MAXWM,
+	ILK_DISPLAY_DFTWM,
+	2,
+	ILK_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params ironlake_cursor_wm_info = {
+	ILK_CURSOR_FIFO,
+	ILK_CURSOR_MAXWM,
+	ILK_CURSOR_DFTWM,
+	2,
+	ILK_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params ironlake_display_srwm_info = {
+	ILK_DISPLAY_SR_FIFO,
+	ILK_DISPLAY_MAX_SRWM,
+	ILK_DISPLAY_DFT_SRWM,
+	2,
+	ILK_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params ironlake_cursor_srwm_info = {
+	ILK_CURSOR_SR_FIFO,
+	ILK_CURSOR_MAX_SRWM,
+	ILK_CURSOR_DFT_SRWM,
+	2,
+	ILK_FIFO_LINE_SIZE
+};
+
+static const struct intel_watermark_params sandybridge_display_wm_info = {
+	SNB_DISPLAY_FIFO,
+	SNB_DISPLAY_MAXWM,
+	SNB_DISPLAY_DFTWM,
+	2,
+	SNB_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params sandybridge_cursor_wm_info = {
+	SNB_CURSOR_FIFO,
+	SNB_CURSOR_MAXWM,
+	SNB_CURSOR_DFTWM,
+	2,
+	SNB_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params sandybridge_display_srwm_info = {
+	SNB_DISPLAY_SR_FIFO,
+	SNB_DISPLAY_MAX_SRWM,
+	SNB_DISPLAY_DFT_SRWM,
+	2,
+	SNB_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params sandybridge_cursor_srwm_info = {
+	SNB_CURSOR_SR_FIFO,
+	SNB_CURSOR_MAX_SRWM,
+	SNB_CURSOR_DFT_SRWM,
+	2,
+	SNB_FIFO_LINE_SIZE
+};
+
+
+/**
+ * intel_calculate_wm - calculate watermark level
+ * @clock_in_khz: pixel clock
+ * @wm: chip FIFO params
+ * @pixel_size: display pixel size
+ * @latency_ns: memory latency for the platform
+ *
+ * Calculate the watermark level (the level at which the display plane will
+ * start fetching from memory again).  Each chip has a different display
+ * FIFO size and allocation, so the caller needs to figure that out and pass
+ * in the correct intel_watermark_params structure.
+ *
+ * As the pixel clock runs, the FIFO will be drained at a rate that depends
+ * on the pixel size.  When it reaches the watermark level, it'll start
+ * fetching FIFO line sized based chunks from memory until the FIFO fills
+ * past the watermark point.  If the FIFO drains completely, a FIFO underrun
+ * will occur, and a display engine hang could result.
+ */
+static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
+					const struct intel_watermark_params *wm,
+					int fifo_size,
+					int pixel_size,
+					unsigned long latency_ns)
+{
+	long entries_required, wm_size;
+
+	/*
+	 * Note: we need to make sure we don't overflow for various clock &
+	 * latency values.
+	 * clocks go from a few thousand to several hundred thousand.
+	 * latency is usually a few thousand
+	 */
+	entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
+		1000;
+	entries_required = DIV_ROUND_UP(entries_required, wm->cacheline_size);
+
+	DRM_DEBUG_KMS("FIFO entries required for mode: %ld\n", entries_required);
+
+	wm_size = fifo_size - (entries_required + wm->guard_size);
+
+	DRM_DEBUG_KMS("FIFO watermark level: %ld\n", wm_size);
+
+	/* Don't promote wm_size to unsigned... */
+	if (wm_size > (long)wm->max_wm)
+		wm_size = wm->max_wm;
+	if (wm_size <= 0)
+		wm_size = wm->default_wm;
+	return wm_size;
+}
+
+struct cxsr_latency {
+	int is_desktop;
+	int is_ddr3;
+	unsigned long fsb_freq;
+	unsigned long mem_freq;
+	unsigned long display_sr;
+	unsigned long display_hpll_disable;
+	unsigned long cursor_sr;
+	unsigned long cursor_hpll_disable;
+};
+
+static const struct cxsr_latency cxsr_latency_table[] = {
+	{1, 0, 800, 400, 3382, 33382, 3983, 33983},    /* DDR2-400 SC */
+	{1, 0, 800, 667, 3354, 33354, 3807, 33807},    /* DDR2-667 SC */
+	{1, 0, 800, 800, 3347, 33347, 3763, 33763},    /* DDR2-800 SC */
+	{1, 1, 800, 667, 6420, 36420, 6873, 36873},    /* DDR3-667 SC */
+	{1, 1, 800, 800, 5902, 35902, 6318, 36318},    /* DDR3-800 SC */
+
+	{1, 0, 667, 400, 3400, 33400, 4021, 34021},    /* DDR2-400 SC */
+	{1, 0, 667, 667, 3372, 33372, 3845, 33845},    /* DDR2-667 SC */
+	{1, 0, 667, 800, 3386, 33386, 3822, 33822},    /* DDR2-800 SC */
+	{1, 1, 667, 667, 6438, 36438, 6911, 36911},    /* DDR3-667 SC */
+	{1, 1, 667, 800, 5941, 35941, 6377, 36377},    /* DDR3-800 SC */
+
+	{1, 0, 400, 400, 3472, 33472, 4173, 34173},    /* DDR2-400 SC */
+	{1, 0, 400, 667, 3443, 33443, 3996, 33996},    /* DDR2-667 SC */
+	{1, 0, 400, 800, 3430, 33430, 3946, 33946},    /* DDR2-800 SC */
+	{1, 1, 400, 667, 6509, 36509, 7062, 37062},    /* DDR3-667 SC */
+	{1, 1, 400, 800, 5985, 35985, 6501, 36501},    /* DDR3-800 SC */
+
+	{0, 0, 800, 400, 3438, 33438, 4065, 34065},    /* DDR2-400 SC */
+	{0, 0, 800, 667, 3410, 33410, 3889, 33889},    /* DDR2-667 SC */
+	{0, 0, 800, 800, 3403, 33403, 3845, 33845},    /* DDR2-800 SC */
+	{0, 1, 800, 667, 6476, 36476, 6955, 36955},    /* DDR3-667 SC */
+	{0, 1, 800, 800, 5958, 35958, 6400, 36400},    /* DDR3-800 SC */
+
+	{0, 0, 667, 400, 3456, 33456, 4103, 34106},    /* DDR2-400 SC */
+	{0, 0, 667, 667, 3428, 33428, 3927, 33927},    /* DDR2-667 SC */
+	{0, 0, 667, 800, 3443, 33443, 3905, 33905},    /* DDR2-800 SC */
+	{0, 1, 667, 667, 6494, 36494, 6993, 36993},    /* DDR3-667 SC */
+	{0, 1, 667, 800, 5998, 35998, 6460, 36460},    /* DDR3-800 SC */
+
+	{0, 0, 400, 400, 3528, 33528, 4255, 34255},    /* DDR2-400 SC */
+	{0, 0, 400, 667, 3500, 33500, 4079, 34079},    /* DDR2-667 SC */
+	{0, 0, 400, 800, 3487, 33487, 4029, 34029},    /* DDR2-800 SC */
+	{0, 1, 400, 667, 6566, 36566, 7145, 37145},    /* DDR3-667 SC */
+	{0, 1, 400, 800, 6042, 36042, 6584, 36584},    /* DDR3-800 SC */
+};
+
+static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop,
+							 int is_ddr3,
+							 int fsb,
+							 int mem)
+{
+	const struct cxsr_latency *latency;
+	int i;
+
+	if (fsb == 0 || mem == 0)
+		return NULL;
+
+	for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
+		latency = &cxsr_latency_table[i];
+		if (is_desktop == latency->is_desktop &&
+		    is_ddr3 == latency->is_ddr3 &&
+		    fsb == latency->fsb_freq && mem == latency->mem_freq)
+			return latency;
+	}
+
+	DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
+
+	return NULL;
+}
+
+static void pineview_disable_cxsr(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* deactivate cxsr */
+	I915_WRITE(DSPFW3, I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN);
+}
+
+/*
+ * Latency for FIFO fetches is dependent on several factors:
+ *   - memory configuration (speed, channels)
+ *   - chipset
+ *   - current MCH state
+ * It can be fairly high in some situations, so here we assume a fairly
+ * pessimal value.  It's a tradeoff between extra memory fetches (if we
+ * set this value too high, the FIFO will fetch frequently to stay full)
+ * and power consumption (set it too low to save power and we might see
+ * FIFO underruns and display "flicker").
+ *
+ * A value of 5us seems to be a good balance; safe for very low end
+ * platforms but not overly aggressive on lower latency configs.
+ */
+static const int latency_ns = 5000;
+
+static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dsparb = I915_READ(DSPARB);
+	int size;
+
+	size = dsparb & 0x7f;
+	if (plane)
+		size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size;
+
+	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
+		      plane ? "B" : "A", size);
+
+	return size;
+}
+
+static int i85x_get_fifo_size(struct drm_device *dev, int plane)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dsparb = I915_READ(DSPARB);
+	int size;
+
+	size = dsparb & 0x1ff;
+	if (plane)
+		size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size;
+	size >>= 1; /* Convert to cachelines */
+
+	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
+		      plane ? "B" : "A", size);
+
+	return size;
+}
+
+static int i845_get_fifo_size(struct drm_device *dev, int plane)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dsparb = I915_READ(DSPARB);
+	int size;
+
+	size = dsparb & 0x7f;
+	size >>= 2; /* Convert to cachelines */
+
+	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
+		      plane ? "B" : "A",
+		      size);
+
+	return size;
+}
+
+static int i830_get_fifo_size(struct drm_device *dev, int plane)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dsparb = I915_READ(DSPARB);
+	int size;
+
+	size = dsparb & 0x7f;
+	size >>= 1; /* Convert to cachelines */
+
+	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
+		      plane ? "B" : "A", size);
+
+	return size;
+}
+
+static struct drm_crtc *single_enabled_crtc(struct drm_device *dev)
+{
+	struct drm_crtc *crtc, *enabled = NULL;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (crtc->enabled && crtc->fb) {
+			if (enabled)
+				return NULL;
+			enabled = crtc;
+		}
+	}
+
+	return enabled;
+}
+
+static void pineview_update_wm(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	const struct cxsr_latency *latency;
+	u32 reg;
+	unsigned long wm;
+
+	latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3,
+					 dev_priv->fsb_freq, dev_priv->mem_freq);
+	if (!latency) {
+		DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
+		pineview_disable_cxsr(dev);
+		return;
+	}
+
+	crtc = single_enabled_crtc(dev);
+	if (crtc) {
+		int clock = crtc->mode.clock;
+		int pixel_size = crtc->fb->bits_per_pixel / 8;
+
+		/* Display SR */
+		wm = intel_calculate_wm(clock, &pineview_display_wm,
+					pineview_display_wm.fifo_size,
+					pixel_size, latency->display_sr);
+		reg = I915_READ(DSPFW1);
+		reg &= ~DSPFW_SR_MASK;
+		reg |= wm << DSPFW_SR_SHIFT;
+		I915_WRITE(DSPFW1, reg);
+		DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);
+
+		/* cursor SR */
+		wm = intel_calculate_wm(clock, &pineview_cursor_wm,
+					pineview_display_wm.fifo_size,
+					pixel_size, latency->cursor_sr);
+		reg = I915_READ(DSPFW3);
+		reg &= ~DSPFW_CURSOR_SR_MASK;
+		reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT;
+		I915_WRITE(DSPFW3, reg);
+
+		/* Display HPLL off SR */
+		wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm,
+					pineview_display_hplloff_wm.fifo_size,
+					pixel_size, latency->display_hpll_disable);
+		reg = I915_READ(DSPFW3);
+		reg &= ~DSPFW_HPLL_SR_MASK;
+		reg |= wm & DSPFW_HPLL_SR_MASK;
+		I915_WRITE(DSPFW3, reg);
+
+		/* cursor HPLL off SR */
+		wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm,
+					pineview_display_hplloff_wm.fifo_size,
+					pixel_size, latency->cursor_hpll_disable);
+		reg = I915_READ(DSPFW3);
+		reg &= ~DSPFW_HPLL_CURSOR_MASK;
+		reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT;
+		I915_WRITE(DSPFW3, reg);
+		DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
+
+		/* activate cxsr */
+		I915_WRITE(DSPFW3,
+			   I915_READ(DSPFW3) | PINEVIEW_SELF_REFRESH_EN);
+		DRM_DEBUG_KMS("Self-refresh is enabled\n");
+	} else {
+		pineview_disable_cxsr(dev);
+		DRM_DEBUG_KMS("Self-refresh is disabled\n");
+	}
+}
+
+static bool g4x_compute_wm0(struct drm_device *dev,
+			    int plane,
+			    const struct intel_watermark_params *display,
+			    int display_latency_ns,
+			    const struct intel_watermark_params *cursor,
+			    int cursor_latency_ns,
+			    int *plane_wm,
+			    int *cursor_wm)
+{
+	struct drm_crtc *crtc;
+	int htotal, hdisplay, clock, pixel_size;
+	int line_time_us, line_count;
+	int entries, tlb_miss;
+
+	crtc = intel_get_crtc_for_plane(dev, plane);
+	if (crtc->fb == NULL || !crtc->enabled) {
+		*cursor_wm = cursor->guard_size;
+		*plane_wm = display->guard_size;
+		return false;
+	}
+
+	htotal = crtc->mode.htotal;
+	hdisplay = crtc->mode.hdisplay;
+	clock = crtc->mode.clock;
+	pixel_size = crtc->fb->bits_per_pixel / 8;
+
+	/* Use the small buffer method to calculate plane watermark */
+	entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
+	tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8;
+	if (tlb_miss > 0)
+		entries += tlb_miss;
+	entries = DIV_ROUND_UP(entries, display->cacheline_size);
+	*plane_wm = entries + display->guard_size;
+	if (*plane_wm > (int)display->max_wm)
+		*plane_wm = display->max_wm;
+
+	/* Use the large buffer method to calculate cursor watermark */
+	line_time_us = ((htotal * 1000) / clock);
+	line_count = (cursor_latency_ns / line_time_us + 1000) / 1000;
+	entries = line_count * 64 * pixel_size;
+	tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8;
+	if (tlb_miss > 0)
+		entries += tlb_miss;
+	entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
+	*cursor_wm = entries + cursor->guard_size;
+	if (*cursor_wm > (int)cursor->max_wm)
+		*cursor_wm = (int)cursor->max_wm;
+
+	return true;
+}
+
+/*
+ * Check the wm result.
+ *
+ * If any calculated watermark values is larger than the maximum value that
+ * can be programmed into the associated watermark register, that watermark
+ * must be disabled.
+ */
+static bool g4x_check_srwm(struct drm_device *dev,
+			   int display_wm, int cursor_wm,
+			   const struct intel_watermark_params *display,
+			   const struct intel_watermark_params *cursor)
+{
+	DRM_DEBUG_KMS("SR watermark: display plane %d, cursor %d\n",
+		      display_wm, cursor_wm);
+
+	if (display_wm > display->max_wm) {
+		DRM_DEBUG_KMS("display watermark is too large(%d/%ld), disabling\n",
+			      display_wm, display->max_wm);
+		return false;
+	}
+
+	if (cursor_wm > cursor->max_wm) {
+		DRM_DEBUG_KMS("cursor watermark is too large(%d/%ld), disabling\n",
+			      cursor_wm, cursor->max_wm);
+		return false;
+	}
+
+	if (!(display_wm || cursor_wm)) {
+		DRM_DEBUG_KMS("SR latency is 0, disabling\n");
+		return false;
+	}
+
+	return true;
+}
+
+static bool g4x_compute_srwm(struct drm_device *dev,
+			     int plane,
+			     int latency_ns,
+			     const struct intel_watermark_params *display,
+			     const struct intel_watermark_params *cursor,
+			     int *display_wm, int *cursor_wm)
+{
+	struct drm_crtc *crtc;
+	int hdisplay, htotal, pixel_size, clock;
+	unsigned long line_time_us;
+	int line_count, line_size;
+	int small, large;
+	int entries;
+
+	if (!latency_ns) {
+		*display_wm = *cursor_wm = 0;
+		return false;
+	}
+
+	crtc = intel_get_crtc_for_plane(dev, plane);
+	hdisplay = crtc->mode.hdisplay;
+	htotal = crtc->mode.htotal;
+	clock = crtc->mode.clock;
+	pixel_size = crtc->fb->bits_per_pixel / 8;
+
+	line_time_us = (htotal * 1000) / clock;
+	line_count = (latency_ns / line_time_us + 1000) / 1000;
+	line_size = hdisplay * pixel_size;
+
+	/* Use the minimum of the small and large buffer method for primary */
+	small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
+	large = line_count * line_size;
+
+	entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
+	*display_wm = entries + display->guard_size;
+
+	/* calculate the self-refresh watermark for display cursor */
+	entries = line_count * pixel_size * 64;
+	entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
+	*cursor_wm = entries + cursor->guard_size;
+
+	return g4x_check_srwm(dev,
+			      *display_wm, *cursor_wm,
+			      display, cursor);
+}
+
+#define single_plane_enabled(mask) is_power_of_2(mask)
+
+static void g4x_update_wm(struct drm_device *dev)
+{
+	static const int sr_latency_ns = 12000;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
+	int plane_sr, cursor_sr;
+	unsigned int enabled = 0;
+
+	if (g4x_compute_wm0(dev, 0,
+			    &g4x_wm_info, latency_ns,
+			    &g4x_cursor_wm_info, latency_ns,
+			    &planea_wm, &cursora_wm))
+		enabled |= 1;
+
+	if (g4x_compute_wm0(dev, 1,
+			    &g4x_wm_info, latency_ns,
+			    &g4x_cursor_wm_info, latency_ns,
+			    &planeb_wm, &cursorb_wm))
+		enabled |= 2;
+
+	plane_sr = cursor_sr = 0;
+	if (single_plane_enabled(enabled) &&
+	    g4x_compute_srwm(dev, ffs(enabled) - 1,
+			     sr_latency_ns,
+			     &g4x_wm_info,
+			     &g4x_cursor_wm_info,
+			     &plane_sr, &cursor_sr))
+		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+	else
+		I915_WRITE(FW_BLC_SELF,
+			   I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN);
+
+	DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n",
+		      planea_wm, cursora_wm,
+		      planeb_wm, cursorb_wm,
+		      plane_sr, cursor_sr);
+
+	I915_WRITE(DSPFW1,
+		   (plane_sr << DSPFW_SR_SHIFT) |
+		   (cursorb_wm << DSPFW_CURSORB_SHIFT) |
+		   (planeb_wm << DSPFW_PLANEB_SHIFT) |
+		   planea_wm);
+	I915_WRITE(DSPFW2,
+		   (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
+		   (cursora_wm << DSPFW_CURSORA_SHIFT));
+	/* HPLL off in SR has some issues on G4x... disable it */
+	I915_WRITE(DSPFW3,
+		   (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) |
+		   (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
+}
+
+static void i965_update_wm(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	int srwm = 1;
+	int cursor_sr = 16;
+
+	/* Calc sr entries for one plane configs */
+	crtc = single_enabled_crtc(dev);
+	if (crtc) {
+		/* self-refresh has much higher latency */
+		static const int sr_latency_ns = 12000;
+		int clock = crtc->mode.clock;
+		int htotal = crtc->mode.htotal;
+		int hdisplay = crtc->mode.hdisplay;
+		int pixel_size = crtc->fb->bits_per_pixel / 8;
+		unsigned long line_time_us;
+		int entries;
+
+		line_time_us = ((htotal * 1000) / clock);
+
+		/* Use ns/us then divide to preserve precision */
+		entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
+			pixel_size * hdisplay;
+		entries = DIV_ROUND_UP(entries, I915_FIFO_LINE_SIZE);
+		srwm = I965_FIFO_SIZE - entries;
+		if (srwm < 0)
+			srwm = 1;
+		srwm &= 0x1ff;
+		DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n",
+			      entries, srwm);
+
+		entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
+			pixel_size * 64;
+		entries = DIV_ROUND_UP(entries,
+					  i965_cursor_wm_info.cacheline_size);
+		cursor_sr = i965_cursor_wm_info.fifo_size -
+			(entries + i965_cursor_wm_info.guard_size);
+
+		if (cursor_sr > i965_cursor_wm_info.max_wm)
+			cursor_sr = i965_cursor_wm_info.max_wm;
+
+		DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
+			      "cursor %d\n", srwm, cursor_sr);
+
+		if (IS_CRESTLINE(dev))
+			I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+	} else {
+		/* Turn off self refresh if both pipes are enabled */
+		if (IS_CRESTLINE(dev))
+			I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
+				   & ~FW_BLC_SELF_EN);
+	}
+
+	DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
+		      srwm);
+
+	/* 965 has limitations... */
+	I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) |
+		   (8 << 16) | (8 << 8) | (8 << 0));
+	I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
+	/* update cursor SR watermark */
+	I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
+}
+
+static void i9xx_update_wm(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	const struct intel_watermark_params *wm_info;
+	uint32_t fwater_lo;
+	uint32_t fwater_hi;
+	int cwm, srwm = 1;
+	int fifo_size;
+	int planea_wm, planeb_wm;
+	struct drm_crtc *crtc, *enabled = NULL;
+
+	if (IS_I945GM(dev))
+		wm_info = &i945_wm_info;
+	else if (!IS_GEN2(dev))
+		wm_info = &i915_wm_info;
+	else
+		wm_info = &i855_wm_info;
+
+	fifo_size = dev_priv->display.get_fifo_size(dev, 0);
+	crtc = intel_get_crtc_for_plane(dev, 0);
+	if (crtc->enabled && crtc->fb) {
+		planea_wm = intel_calculate_wm(crtc->mode.clock,
+					       wm_info, fifo_size,
+					       crtc->fb->bits_per_pixel / 8,
+					       latency_ns);
+		enabled = crtc;
+	} else
+		planea_wm = fifo_size - wm_info->guard_size;
+
+	fifo_size = dev_priv->display.get_fifo_size(dev, 1);
+	crtc = intel_get_crtc_for_plane(dev, 1);
+	if (crtc->enabled && crtc->fb) {
+		planeb_wm = intel_calculate_wm(crtc->mode.clock,
+					       wm_info, fifo_size,
+					       crtc->fb->bits_per_pixel / 8,
+					       latency_ns);
+		if (enabled == NULL)
+			enabled = crtc;
+		else
+			enabled = NULL;
+	} else
+		planeb_wm = fifo_size - wm_info->guard_size;
+
+	DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
+
+	/*
+	 * Overlay gets an aggressive default since video jitter is bad.
+	 */
+	cwm = 2;
+
+	/* Play safe and disable self-refresh before adjusting watermarks. */
+	if (IS_I945G(dev) || IS_I945GM(dev))
+		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | 0);
+	else if (IS_I915GM(dev))
+		I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN);
+
+	/* Calc sr entries for one plane configs */
+	if (HAS_FW_BLC(dev) && enabled) {
+		/* self-refresh has much higher latency */
+		static const int sr_latency_ns = 6000;
+		int clock = enabled->mode.clock;
+		int htotal = enabled->mode.htotal;
+		int hdisplay = enabled->mode.hdisplay;
+		int pixel_size = enabled->fb->bits_per_pixel / 8;
+		unsigned long line_time_us;
+		int entries;
+
+		line_time_us = (htotal * 1000) / clock;
+
+		/* Use ns/us then divide to preserve precision */
+		entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
+			pixel_size * hdisplay;
+		entries = DIV_ROUND_UP(entries, wm_info->cacheline_size);
+		DRM_DEBUG_KMS("self-refresh entries: %d\n", entries);
+		srwm = wm_info->fifo_size - entries;
+		if (srwm < 0)
+			srwm = 1;
+
+		if (IS_I945G(dev) || IS_I945GM(dev))
+			I915_WRITE(FW_BLC_SELF,
+				   FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
+		else if (IS_I915GM(dev))
+			I915_WRITE(FW_BLC_SELF, srwm & 0x3f);
+	}
+
+	DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
+		      planea_wm, planeb_wm, cwm, srwm);
+
+	fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
+	fwater_hi = (cwm & 0x1f);
+
+	/* Set request length to 8 cachelines per fetch */
+	fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
+	fwater_hi = fwater_hi | (1 << 8);
+
+	I915_WRITE(FW_BLC, fwater_lo);
+	I915_WRITE(FW_BLC2, fwater_hi);
+
+	if (HAS_FW_BLC(dev)) {
+		if (enabled) {
+			if (IS_I945G(dev) || IS_I945GM(dev))
+				I915_WRITE(FW_BLC_SELF,
+					   FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
+			else if (IS_I915GM(dev))
+				I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN);
+			DRM_DEBUG_KMS("memory self refresh enabled\n");
+		} else
+			DRM_DEBUG_KMS("memory self refresh disabled\n");
+	}
+}
+
+static void i830_update_wm(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	uint32_t fwater_lo;
+	int planea_wm;
+
+	crtc = single_enabled_crtc(dev);
+	if (crtc == NULL)
+		return;
+
+	planea_wm = intel_calculate_wm(crtc->mode.clock, &i830_wm_info,
+				       dev_priv->display.get_fifo_size(dev, 0),
+				       crtc->fb->bits_per_pixel / 8,
+				       latency_ns);
+	fwater_lo = I915_READ(FW_BLC) & ~0xfff;
+	fwater_lo |= (3<<8) | planea_wm;
+
+	DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm);
+
+	I915_WRITE(FW_BLC, fwater_lo);
+}
+
+#define ILK_LP0_PLANE_LATENCY		700
+#define ILK_LP0_CURSOR_LATENCY		1300
+
+/*
+ * Check the wm result.
+ *
+ * If any calculated watermark values is larger than the maximum value that
+ * can be programmed into the associated watermark register, that watermark
+ * must be disabled.
+ */
+static bool ironlake_check_srwm(struct drm_device *dev, int level,
+				int fbc_wm, int display_wm, int cursor_wm,
+				const struct intel_watermark_params *display,
+				const struct intel_watermark_params *cursor)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	DRM_DEBUG_KMS("watermark %d: display plane %d, fbc lines %d,"
+		      " cursor %d\n", level, display_wm, fbc_wm, cursor_wm);
+
+	if (fbc_wm > SNB_FBC_MAX_SRWM) {
+		DRM_DEBUG_KMS("fbc watermark(%d) is too large(%d), disabling wm%d+\n",
+			      fbc_wm, SNB_FBC_MAX_SRWM, level);
+
+		/* fbc has it's own way to disable FBC WM */
+		I915_WRITE(DISP_ARB_CTL,
+			   I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS);
+		return false;
+	}
+
+	if (display_wm > display->max_wm) {
+		DRM_DEBUG_KMS("display watermark(%d) is too large(%d), disabling wm%d+\n",
+			      display_wm, SNB_DISPLAY_MAX_SRWM, level);
+		return false;
+	}
+
+	if (cursor_wm > cursor->max_wm) {
+		DRM_DEBUG_KMS("cursor watermark(%d) is too large(%d), disabling wm%d+\n",
+			      cursor_wm, SNB_CURSOR_MAX_SRWM, level);
+		return false;
+	}
+
+	if (!(fbc_wm || display_wm || cursor_wm)) {
+		DRM_DEBUG_KMS("latency %d is 0, disabling wm%d+\n", level, level);
+		return false;
+	}
+
+	return true;
+}
+
+/*
+ * Compute watermark values of WM[1-3],
+ */
+static bool ironlake_compute_srwm(struct drm_device *dev, int level, int plane,
+				  int latency_ns,
+				  const struct intel_watermark_params *display,
+				  const struct intel_watermark_params *cursor,
+				  int *fbc_wm, int *display_wm, int *cursor_wm)
+{
+	struct drm_crtc *crtc;
+	unsigned long line_time_us;
+	int hdisplay, htotal, pixel_size, clock;
+	int line_count, line_size;
+	int small, large;
+	int entries;
+
+	if (!latency_ns) {
+		*fbc_wm = *display_wm = *cursor_wm = 0;
+		return false;
+	}
+
+	crtc = intel_get_crtc_for_plane(dev, plane);
+	hdisplay = crtc->mode.hdisplay;
+	htotal = crtc->mode.htotal;
+	clock = crtc->mode.clock;
+	pixel_size = crtc->fb->bits_per_pixel / 8;
+
+	line_time_us = (htotal * 1000) / clock;
+	line_count = (latency_ns / line_time_us + 1000) / 1000;
+	line_size = hdisplay * pixel_size;
+
+	/* Use the minimum of the small and large buffer method for primary */
+	small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
+	large = line_count * line_size;
+
+	entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
+	*display_wm = entries + display->guard_size;
+
+	/*
+	 * Spec says:
+	 * FBC WM = ((Final Primary WM * 64) / number of bytes per line) + 2
+	 */
+	*fbc_wm = DIV_ROUND_UP(*display_wm * 64, line_size) + 2;
+
+	/* calculate the self-refresh watermark for display cursor */
+	entries = line_count * pixel_size * 64;
+	entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
+	*cursor_wm = entries + cursor->guard_size;
+
+	return ironlake_check_srwm(dev, level,
+				   *fbc_wm, *display_wm, *cursor_wm,
+				   display, cursor);
+}
+
+static void ironlake_update_wm(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int fbc_wm, plane_wm, cursor_wm;
+	unsigned int enabled;
+
+	enabled = 0;
+	if (g4x_compute_wm0(dev, 0,
+			    &ironlake_display_wm_info,
+			    ILK_LP0_PLANE_LATENCY,
+			    &ironlake_cursor_wm_info,
+			    ILK_LP0_CURSOR_LATENCY,
+			    &plane_wm, &cursor_wm)) {
+		I915_WRITE(WM0_PIPEA_ILK,
+			   (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
+		DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
+			      " plane %d, " "cursor: %d\n",
+			      plane_wm, cursor_wm);
+		enabled |= 1;
+	}
+
+	if (g4x_compute_wm0(dev, 1,
+			    &ironlake_display_wm_info,
+			    ILK_LP0_PLANE_LATENCY,
+			    &ironlake_cursor_wm_info,
+			    ILK_LP0_CURSOR_LATENCY,
+			    &plane_wm, &cursor_wm)) {
+		I915_WRITE(WM0_PIPEB_ILK,
+			   (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
+		DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
+			      " plane %d, cursor: %d\n",
+			      plane_wm, cursor_wm);
+		enabled |= 2;
+	}
+
+	/*
+	 * Calculate and update the self-refresh watermark only when one
+	 * display plane is used.
+	 */
+	I915_WRITE(WM3_LP_ILK, 0);
+	I915_WRITE(WM2_LP_ILK, 0);
+	I915_WRITE(WM1_LP_ILK, 0);
+
+	if (!single_plane_enabled(enabled))
+		return;
+	enabled = ffs(enabled) - 1;
+
+	/* WM1 */
+	if (!ironlake_compute_srwm(dev, 1, enabled,
+				   ILK_READ_WM1_LATENCY() * 500,
+				   &ironlake_display_srwm_info,
+				   &ironlake_cursor_srwm_info,
+				   &fbc_wm, &plane_wm, &cursor_wm))
+		return;
+
+	I915_WRITE(WM1_LP_ILK,
+		   WM1_LP_SR_EN |
+		   (ILK_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+		   (fbc_wm << WM1_LP_FBC_SHIFT) |
+		   (plane_wm << WM1_LP_SR_SHIFT) |
+		   cursor_wm);
+
+	/* WM2 */
+	if (!ironlake_compute_srwm(dev, 2, enabled,
+				   ILK_READ_WM2_LATENCY() * 500,
+				   &ironlake_display_srwm_info,
+				   &ironlake_cursor_srwm_info,
+				   &fbc_wm, &plane_wm, &cursor_wm))
+		return;
+
+	I915_WRITE(WM2_LP_ILK,
+		   WM2_LP_EN |
+		   (ILK_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+		   (fbc_wm << WM1_LP_FBC_SHIFT) |
+		   (plane_wm << WM1_LP_SR_SHIFT) |
+		   cursor_wm);
+
+	/*
+	 * WM3 is unsupported on ILK, probably because we don't have latency
+	 * data for that power state
+	 */
+}
+
+void sandybridge_update_wm(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int latency = SNB_READ_WM0_LATENCY() * 100;	/* In unit 0.1us */
+	u32 val;
+	int fbc_wm, plane_wm, cursor_wm;
+	unsigned int enabled;
+
+	enabled = 0;
+	if (g4x_compute_wm0(dev, 0,
+			    &sandybridge_display_wm_info, latency,
+			    &sandybridge_cursor_wm_info, latency,
+			    &plane_wm, &cursor_wm)) {
+		val = I915_READ(WM0_PIPEA_ILK);
+		val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
+		I915_WRITE(WM0_PIPEA_ILK, val |
+			   ((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
+		DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
+			      " plane %d, " "cursor: %d\n",
+			      plane_wm, cursor_wm);
+		enabled |= 1;
+	}
+
+	if (g4x_compute_wm0(dev, 1,
+			    &sandybridge_display_wm_info, latency,
+			    &sandybridge_cursor_wm_info, latency,
+			    &plane_wm, &cursor_wm)) {
+		val = I915_READ(WM0_PIPEB_ILK);
+		val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
+		I915_WRITE(WM0_PIPEB_ILK, val |
+			   ((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
+		DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
+			      " plane %d, cursor: %d\n",
+			      plane_wm, cursor_wm);
+		enabled |= 2;
+	}
+
+	/* IVB has 3 pipes */
+	if (IS_IVYBRIDGE(dev) &&
+	    g4x_compute_wm0(dev, 2,
+			    &sandybridge_display_wm_info, latency,
+			    &sandybridge_cursor_wm_info, latency,
+			    &plane_wm, &cursor_wm)) {
+		val = I915_READ(WM0_PIPEC_IVB);
+		val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
+		I915_WRITE(WM0_PIPEC_IVB, val |
+			   ((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
+		DRM_DEBUG_KMS("FIFO watermarks For pipe C -"
+			      " plane %d, cursor: %d\n",
+			      plane_wm, cursor_wm);
+		enabled |= 3;
+	}
+
+	/*
+	 * Calculate and update the self-refresh watermark only when one
+	 * display plane is used.
+	 *
+	 * SNB support 3 levels of watermark.
+	 *
+	 * WM1/WM2/WM2 watermarks have to be enabled in the ascending order,
+	 * and disabled in the descending order
+	 *
+	 */
+	I915_WRITE(WM3_LP_ILK, 0);
+	I915_WRITE(WM2_LP_ILK, 0);
+	I915_WRITE(WM1_LP_ILK, 0);
+
+	if (!single_plane_enabled(enabled) ||
+	    dev_priv->sprite_scaling_enabled)
+		return;
+	enabled = ffs(enabled) - 1;
+
+	/* WM1 */
+	if (!ironlake_compute_srwm(dev, 1, enabled,
+				   SNB_READ_WM1_LATENCY() * 500,
+				   &sandybridge_display_srwm_info,
+				   &sandybridge_cursor_srwm_info,
+				   &fbc_wm, &plane_wm, &cursor_wm))
+		return;
+
+	I915_WRITE(WM1_LP_ILK,
+		   WM1_LP_SR_EN |
+		   (SNB_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+		   (fbc_wm << WM1_LP_FBC_SHIFT) |
+		   (plane_wm << WM1_LP_SR_SHIFT) |
+		   cursor_wm);
+
+	/* WM2 */
+	if (!ironlake_compute_srwm(dev, 2, enabled,
+				   SNB_READ_WM2_LATENCY() * 500,
+				   &sandybridge_display_srwm_info,
+				   &sandybridge_cursor_srwm_info,
+				   &fbc_wm, &plane_wm, &cursor_wm))
+		return;
+
+	I915_WRITE(WM2_LP_ILK,
+		   WM2_LP_EN |
+		   (SNB_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+		   (fbc_wm << WM1_LP_FBC_SHIFT) |
+		   (plane_wm << WM1_LP_SR_SHIFT) |
+		   cursor_wm);
+
+	/* WM3 */
+	if (!ironlake_compute_srwm(dev, 3, enabled,
+				   SNB_READ_WM3_LATENCY() * 500,
+				   &sandybridge_display_srwm_info,
+				   &sandybridge_cursor_srwm_info,
+				   &fbc_wm, &plane_wm, &cursor_wm))
+		return;
+
+	I915_WRITE(WM3_LP_ILK,
+		   WM3_LP_EN |
+		   (SNB_READ_WM3_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+		   (fbc_wm << WM1_LP_FBC_SHIFT) |
+		   (plane_wm << WM1_LP_SR_SHIFT) |
+		   cursor_wm);
+}
+
+static bool
+sandybridge_compute_sprite_wm(struct drm_device *dev, int plane,
+			      uint32_t sprite_width, int pixel_size,
+			      const struct intel_watermark_params *display,
+			      int display_latency_ns, int *sprite_wm)
+{
+	struct drm_crtc *crtc;
+	int clock;
+	int entries, tlb_miss;
+
+	crtc = intel_get_crtc_for_plane(dev, plane);
+	if (crtc->fb == NULL || !crtc->enabled) {
+		*sprite_wm = display->guard_size;
+		return false;
+	}
+
+	clock = crtc->mode.clock;
+
+	/* Use the small buffer method to calculate the sprite watermark */
+	entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
+	tlb_miss = display->fifo_size*display->cacheline_size -
+		sprite_width * 8;
+	if (tlb_miss > 0)
+		entries += tlb_miss;
+	entries = DIV_ROUND_UP(entries, display->cacheline_size);
+	*sprite_wm = entries + display->guard_size;
+	if (*sprite_wm > (int)display->max_wm)
+		*sprite_wm = display->max_wm;
+
+	return true;
+}
+
+static bool
+sandybridge_compute_sprite_srwm(struct drm_device *dev, int plane,
+				uint32_t sprite_width, int pixel_size,
+				const struct intel_watermark_params *display,
+				int latency_ns, int *sprite_wm)
+{
+	struct drm_crtc *crtc;
+	unsigned long line_time_us;
+	int clock;
+	int line_count, line_size;
+	int small, large;
+	int entries;
+
+	if (!latency_ns) {
+		*sprite_wm = 0;
+		return false;
+	}
+
+	crtc = intel_get_crtc_for_plane(dev, plane);
+	clock = crtc->mode.clock;
+	if (!clock) {
+		*sprite_wm = 0;
+		return false;
+	}
+
+	line_time_us = (sprite_width * 1000) / clock;
+	if (!line_time_us) {
+		*sprite_wm = 0;
+		return false;
+	}
+
+	line_count = (latency_ns / line_time_us + 1000) / 1000;
+	line_size = sprite_width * pixel_size;
+
+	/* Use the minimum of the small and large buffer method for primary */
+	small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
+	large = line_count * line_size;
+
+	entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
+	*sprite_wm = entries + display->guard_size;
+
+	return *sprite_wm > 0x3ff ? false : true;
+}
+
+static void sandybridge_update_sprite_wm(struct drm_device *dev, int pipe,
+					 uint32_t sprite_width, int pixel_size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int latency = SNB_READ_WM0_LATENCY() * 100;	/* In unit 0.1us */
+	u32 val;
+	int sprite_wm, reg;
+	int ret;
+
+	switch (pipe) {
+	case 0:
+		reg = WM0_PIPEA_ILK;
+		break;
+	case 1:
+		reg = WM0_PIPEB_ILK;
+		break;
+	case 2:
+		reg = WM0_PIPEC_IVB;
+		break;
+	default:
+		return; /* bad pipe */
+	}
+
+	ret = sandybridge_compute_sprite_wm(dev, pipe, sprite_width, pixel_size,
+					    &sandybridge_display_wm_info,
+					    latency, &sprite_wm);
+	if (!ret) {
+		DRM_DEBUG_KMS("failed to compute sprite wm for pipe %d\n",
+			      pipe);
+		return;
+	}
+
+	val = I915_READ(reg);
+	val &= ~WM0_PIPE_SPRITE_MASK;
+	I915_WRITE(reg, val | (sprite_wm << WM0_PIPE_SPRITE_SHIFT));
+	DRM_DEBUG_KMS("sprite watermarks For pipe %d - %d\n", pipe, sprite_wm);
+
+
+	ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
+					      pixel_size,
+					      &sandybridge_display_srwm_info,
+					      SNB_READ_WM1_LATENCY() * 500,
+					      &sprite_wm);
+	if (!ret) {
+		DRM_DEBUG_KMS("failed to compute sprite lp1 wm on pipe %d\n",
+			      pipe);
+		return;
+	}
+	I915_WRITE(WM1S_LP_ILK, sprite_wm);
+
+	/* Only IVB has two more LP watermarks for sprite */
+	if (!IS_IVYBRIDGE(dev))
+		return;
+
+	ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
+					      pixel_size,
+					      &sandybridge_display_srwm_info,
+					      SNB_READ_WM2_LATENCY() * 500,
+					      &sprite_wm);
+	if (!ret) {
+		DRM_DEBUG_KMS("failed to compute sprite lp2 wm on pipe %d\n",
+			      pipe);
+		return;
+	}
+	I915_WRITE(WM2S_LP_IVB, sprite_wm);
+
+	ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
+					      pixel_size,
+					      &sandybridge_display_srwm_info,
+					      SNB_READ_WM3_LATENCY() * 500,
+					      &sprite_wm);
+	if (!ret) {
+		DRM_DEBUG_KMS("failed to compute sprite lp3 wm on pipe %d\n",
+			      pipe);
+		return;
+	}
+	I915_WRITE(WM3S_LP_IVB, sprite_wm);
+}
+
+/**
+ * intel_update_watermarks - update FIFO watermark values based on current modes
+ *
+ * Calculate watermark values for the various WM regs based on current mode
+ * and plane configuration.
+ *
+ * There are several cases to deal with here:
+ *   - normal (i.e. non-self-refresh)
+ *   - self-refresh (SR) mode
+ *   - lines are large relative to FIFO size (buffer can hold up to 2)
+ *   - lines are small relative to FIFO size (buffer can hold more than 2
+ *     lines), so need to account for TLB latency
+ *
+ *   The normal calculation is:
+ *     watermark = dotclock * bytes per pixel * latency
+ *   where latency is platform & configuration dependent (we assume pessimal
+ *   values here).
+ *
+ *   The SR calculation is:
+ *     watermark = (trunc(latency/line time)+1) * surface width *
+ *       bytes per pixel
+ *   where
+ *     line time = htotal / dotclock
+ *     surface width = hdisplay for normal plane and 64 for cursor
+ *   and latency is assumed to be high, as above.
+ *
+ * The final value programmed to the register should always be rounded up,
+ * and include an extra 2 entries to account for clock crossings.
+ *
+ * We don't use the sprite, so we can ignore that.  And on Crestline we have
+ * to set the non-SR watermarks to 8.
+ */
+static void intel_update_watermarks(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->display.update_wm)
+		dev_priv->display.update_wm(dev);
+}
+
+void intel_update_sprite_watermarks(struct drm_device *dev, int pipe,
+				    uint32_t sprite_width, int pixel_size)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->display.update_sprite_wm)
+		dev_priv->display.update_sprite_wm(dev, pipe, sprite_width,
+						   pixel_size);
+}
+
+static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
+{
+	if (i915_panel_use_ssc >= 0)
+		return i915_panel_use_ssc != 0;
+	return dev_priv->lvds_use_ssc
+		&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
+}
+
+/**
+ * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
+ * @crtc: CRTC structure
+ * @mode: requested mode
+ *
+ * A pipe may be connected to one or more outputs.  Based on the depth of the
+ * attached framebuffer, choose a good color depth to use on the pipe.
+ *
+ * If possible, match the pipe depth to the fb depth.  In some cases, this
+ * isn't ideal, because the connected output supports a lesser or restricted
+ * set of depths.  Resolve that here:
+ *    LVDS typically supports only 6bpc, so clamp down in that case
+ *    HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
+ *    Displays may support a restricted set as well, check EDID and clamp as
+ *      appropriate.
+ *    DP may want to dither down to 6bpc to fit larger modes
+ *
+ * RETURNS:
+ * Dithering requirement (i.e. false if display bpc and pipe bpc match,
+ * true if they don't match).
+ */
+static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
+					 unsigned int *pipe_bpp,
+					 struct drm_display_mode *mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	unsigned int display_bpc = UINT_MAX, bpc;
+
+	/* Walk the encoders & connectors on this crtc, get min bpc */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		if (intel_encoder->type == INTEL_OUTPUT_LVDS) {
+			unsigned int lvds_bpc;
+
+			if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) ==
+			    LVDS_A3_POWER_UP)
+				lvds_bpc = 8;
+			else
+				lvds_bpc = 6;
+
+			if (lvds_bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
+				display_bpc = lvds_bpc;
+			}
+			continue;
+		}
+
+		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+			/* Use VBT settings if we have an eDP panel */
+			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+
+			if (edp_bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+				display_bpc = edp_bpc;
+			}
+			continue;
+		}
+
+		/* Not one of the known troublemakers, check the EDID */
+		list_for_each_entry(connector, &dev->mode_config.connector_list,
+				    head) {
+			if (connector->encoder != encoder)
+				continue;
+
+			/* Don't use an invalid EDID bpc value */
+			if (connector->display_info.bpc &&
+			    connector->display_info.bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
+				display_bpc = connector->display_info.bpc;
+			}
+		}
+
+		/*
+		 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
+		 * through, clamp it down.  (Note: >12bpc will be caught below.)
+		 */
+		if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
+			if (display_bpc > 8 && display_bpc < 12) {
+				DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
+				display_bpc = 12;
+			} else {
+				DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
+				display_bpc = 8;
+			}
+		}
+	}
+
+	if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
+		DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
+		display_bpc = 6;
+	}
+
+	/*
+	 * We could just drive the pipe at the highest bpc all the time and
+	 * enable dithering as needed, but that costs bandwidth.  So choose
+	 * the minimum value that expresses the full color range of the fb but
+	 * also stays within the max display bpc discovered above.
+	 */
+
+	switch (crtc->fb->depth) {
+	case 8:
+		bpc = 8; /* since we go through a colormap */
+		break;
+	case 15:
+	case 16:
+		bpc = 6; /* min is 18bpp */
+		break;
+	case 24:
+		bpc = 8;
+		break;
+	case 30:
+		bpc = 10;
+		break;
+	case 48:
+		bpc = 12;
+		break;
+	default:
+		DRM_DEBUG("unsupported depth, assuming 24 bits\n");
+		bpc = min((unsigned int)8, display_bpc);
+		break;
+	}
+
+	display_bpc = min(display_bpc, bpc);
+
+	DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
+		      bpc, display_bpc);
+
+	*pipe_bpp = display_bpc * 3;
+
+	return display_bpc != bpc;
+}
+
+static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int refclk;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	    intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
+		refclk = dev_priv->lvds_ssc_freq * 1000;
+		DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
+			      refclk / 1000);
+	} else if (!IS_GEN2(dev)) {
+		refclk = 96000;
+	} else {
+		refclk = 48000;
+	}
+
+	return refclk;
+}
+
+static void i9xx_adjust_sdvo_tv_clock(struct drm_display_mode *adjusted_mode,
+				      intel_clock_t *clock)
+{
+	/* SDVO TV has fixed PLL values depend on its clock range,
+	   this mirrors vbios setting. */
+	if (adjusted_mode->clock >= 100000
+	    && adjusted_mode->clock < 140500) {
+		clock->p1 = 2;
+		clock->p2 = 10;
+		clock->n = 3;
+		clock->m1 = 16;
+		clock->m2 = 8;
+	} else if (adjusted_mode->clock >= 140500
+		   && adjusted_mode->clock <= 200000) {
+		clock->p1 = 1;
+		clock->p2 = 10;
+		clock->n = 6;
+		clock->m1 = 12;
+		clock->m2 = 8;
+	}
+}
+
+static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
+				     intel_clock_t *clock,
+				     intel_clock_t *reduced_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 fp, fp2 = 0;
+
+	if (IS_PINEVIEW(dev)) {
+		fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
+		if (reduced_clock)
+			fp2 = (1 << reduced_clock->n) << 16 |
+				reduced_clock->m1 << 8 | reduced_clock->m2;
+	} else {
+		fp = clock->n << 16 | clock->m1 << 8 | clock->m2;
+		if (reduced_clock)
+			fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 |
+				reduced_clock->m2;
+	}
+
+	I915_WRITE(FP0(pipe), fp);
+
+	intel_crtc->lowfreq_avail = false;
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	    reduced_clock && i915_powersave) {
+		I915_WRITE(FP1(pipe), fp2);
+		intel_crtc->lowfreq_avail = true;
+	} else {
+		I915_WRITE(FP1(pipe), fp);
+	}
+}
+
+static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
+			      struct drm_display_mode *mode,
+			      struct drm_display_mode *adjusted_mode,
+			      int x, int y,
+			      struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	int refclk, num_connectors = 0;
+	intel_clock_t clock, reduced_clock;
+	u32 dpll, dspcntr, pipeconf, vsyncshift;
+	bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
+	bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+	const intel_limit_t *limit;
+	int ret;
+	u32 temp;
+	u32 lvds_sync = 0;
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+		if (encoder->base.crtc != crtc)
+			continue;
+
+		switch (encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_SDVO:
+		case INTEL_OUTPUT_HDMI:
+			is_sdvo = true;
+			if (encoder->needs_tv_clock)
+				is_tv = true;
+			break;
+		case INTEL_OUTPUT_DVO:
+			is_dvo = true;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = true;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = true;
+			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			is_dp = true;
+			break;
+		}
+
+		num_connectors++;
+	}
+
+	refclk = i9xx_get_refclk(crtc, num_connectors);
+
+	/*
+	 * Returns a set of divisors for the desired target clock with the given
+	 * refclk, or FALSE.  The returned values represent the clock equation:
+	 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+	 */
+	limit = intel_limit(crtc, refclk);
+	ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
+			     &clock);
+	if (!ok) {
+		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	/* Ensure that the cursor is valid for the new mode before changing... */
+	intel_crtc_update_cursor(crtc, true);
+
+	if (is_lvds && dev_priv->lvds_downclock_avail) {
+		/*
+		 * Ensure we match the reduced clock's P to the target clock.
+		 * If the clocks don't match, we can't switch the display clock
+		 * by using the FP0/FP1. In such case we will disable the LVDS
+		 * downclock feature.
+		*/
+		has_reduced_clock = limit->find_pll(limit, crtc,
+						    dev_priv->lvds_downclock,
+						    refclk,
+						    &clock,
+						    &reduced_clock);
+	}
+
+	if (is_sdvo && is_tv)
+		i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
+
+	i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ?
+				 &reduced_clock : NULL);
+
+	dpll = DPLL_VGA_MODE_DIS;
+
+	if (!IS_GEN2(dev)) {
+		if (is_lvds)
+			dpll |= DPLLB_MODE_LVDS;
+		else
+			dpll |= DPLLB_MODE_DAC_SERIAL;
+		if (is_sdvo) {
+			int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+			if (pixel_multiplier > 1) {
+				if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+					dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+			}
+			dpll |= DPLL_DVO_HIGH_SPEED;
+		}
+		if (is_dp)
+			dpll |= DPLL_DVO_HIGH_SPEED;
+
+		/* compute bitmask from p1 value */
+		if (IS_PINEVIEW(dev))
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
+		else {
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+			if (IS_G4X(dev) && has_reduced_clock)
+				dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+		}
+		switch (clock.p2) {
+		case 5:
+			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+			break;
+		case 7:
+			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+			break;
+		case 10:
+			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+			break;
+		case 14:
+			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+			break;
+		}
+		if (INTEL_INFO(dev)->gen >= 4)
+			dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+	} else {
+		if (is_lvds) {
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+		} else {
+			if (clock.p1 == 2)
+				dpll |= PLL_P1_DIVIDE_BY_TWO;
+			else
+				dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+			if (clock.p2 == 4)
+				dpll |= PLL_P2_DIVIDE_BY_4;
+		}
+	}
+
+	if (is_sdvo && is_tv)
+		dpll |= PLL_REF_INPUT_TVCLKINBC;
+	else if (is_tv)
+		/* XXX: just matching BIOS for now */
+		/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
+		dpll |= 3;
+	else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+	else
+		dpll |= PLL_REF_INPUT_DREFCLK;
+
+	/* setup pipeconf */
+	pipeconf = I915_READ(PIPECONF(pipe));
+
+	/* Set up the display plane register */
+	dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+	if (pipe == 0)
+		dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
+	else
+		dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+	if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
+		/* Enable pixel doubling when the dot clock is > 90% of the (display)
+		 * core speed.
+		 *
+		 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
+		 * pipe == 0 check?
+		 */
+		if (mode->clock >
+		    dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
+			pipeconf |= PIPECONF_DOUBLE_WIDE;
+		else
+			pipeconf &= ~PIPECONF_DOUBLE_WIDE;
+	}
+
+	/* default to 8bpc */
+	pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
+	if (is_dp) {
+		if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
+			pipeconf |= PIPECONF_BPP_6 |
+				    PIPECONF_DITHER_EN |
+				    PIPECONF_DITHER_TYPE_SP;
+		}
+	}
+
+	dpll |= DPLL_VCO_ENABLE;
+
+	DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+	drm_mode_debug_printmodeline(mode);
+
+	I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
+
+	POSTING_READ(DPLL(pipe));
+	udelay(150);
+
+	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+	 * This is an exception to the general rule that mode_set doesn't turn
+	 * things on.
+	 */
+	if (is_lvds) {
+		temp = I915_READ(LVDS);
+		temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+		if (pipe == 1) {
+			temp |= LVDS_PIPEB_SELECT;
+		} else {
+			temp &= ~LVDS_PIPEB_SELECT;
+		}
+		/* set the corresponsding LVDS_BORDER bit */
+		temp |= dev_priv->lvds_border_bits;
+		/* Set the B0-B3 data pairs corresponding to whether we're going to
+		 * set the DPLLs for dual-channel mode or not.
+		 */
+		if (clock.p2 == 7)
+			temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+		else
+			temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+		 * appropriately here, but we need to look more thoroughly into how
+		 * panels behave in the two modes.
+		 */
+		/* set the dithering flag on LVDS as needed */
+		if (INTEL_INFO(dev)->gen >= 4) {
+			if (dev_priv->lvds_dither)
+				temp |= LVDS_ENABLE_DITHER;
+			else
+				temp &= ~LVDS_ENABLE_DITHER;
+		}
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+			lvds_sync |= LVDS_HSYNC_POLARITY;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+			lvds_sync |= LVDS_VSYNC_POLARITY;
+		if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
+		    != lvds_sync) {
+			char flags[2] = "-+";
+			DRM_INFO("Changing LVDS panel from "
+				 "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
+				 flags[!(temp & LVDS_HSYNC_POLARITY)],
+				 flags[!(temp & LVDS_VSYNC_POLARITY)],
+				 flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
+				 flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
+			temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+			temp |= lvds_sync;
+		}
+		I915_WRITE(LVDS, temp);
+	}
+
+	if (is_dp) {
+		intel_dp_set_m_n(crtc, mode, adjusted_mode);
+	}
+
+	I915_WRITE(DPLL(pipe), dpll);
+
+	/* Wait for the clocks to stabilize. */
+	POSTING_READ(DPLL(pipe));
+	udelay(150);
+
+	if (INTEL_INFO(dev)->gen >= 4) {
+		temp = 0;
+		if (is_sdvo) {
+			temp = intel_mode_get_pixel_multiplier(adjusted_mode);
+			if (temp > 1)
+				temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+			else
+				temp = 0;
+		}
+		I915_WRITE(DPLL_MD(pipe), temp);
+	} else {
+		/* The pixel multiplier can only be updated once the
+		 * DPLL is enabled and the clocks are stable.
+		 *
+		 * So write it again.
+		 */
+		I915_WRITE(DPLL(pipe), dpll);
+	}
+
+	if (HAS_PIPE_CXSR(dev)) {
+		if (intel_crtc->lowfreq_avail) {
+			DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+			pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+		} else {
+			DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+			pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+		}
+	}
+
+	pipeconf &= ~PIPECONF_INTERLACE_MASK;
+	if (!IS_GEN2(dev) &&
+	    adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
+		/* the chip adds 2 halflines automatically */
+		adjusted_mode->crtc_vtotal -= 1;
+		adjusted_mode->crtc_vblank_end -= 1;
+		vsyncshift = adjusted_mode->crtc_hsync_start
+			     - adjusted_mode->crtc_htotal/2;
+	} else {
+		pipeconf |= PIPECONF_PROGRESSIVE;
+		vsyncshift = 0;
+	}
+
+	if (!IS_GEN3(dev))
+		I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
+
+	I915_WRITE(HTOTAL(pipe),
+		   (adjusted_mode->crtc_hdisplay - 1) |
+		   ((adjusted_mode->crtc_htotal - 1) << 16));
+	I915_WRITE(HBLANK(pipe),
+		   (adjusted_mode->crtc_hblank_start - 1) |
+		   ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	I915_WRITE(HSYNC(pipe),
+		   (adjusted_mode->crtc_hsync_start - 1) |
+		   ((adjusted_mode->crtc_hsync_end - 1) << 16));
+
+	I915_WRITE(VTOTAL(pipe),
+		   (adjusted_mode->crtc_vdisplay - 1) |
+		   ((adjusted_mode->crtc_vtotal - 1) << 16));
+	I915_WRITE(VBLANK(pipe),
+		   (adjusted_mode->crtc_vblank_start - 1) |
+		   ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	I915_WRITE(VSYNC(pipe),
+		   (adjusted_mode->crtc_vsync_start - 1) |
+		   ((adjusted_mode->crtc_vsync_end - 1) << 16));
+
+	/* pipesrc and dspsize control the size that is scaled from,
+	 * which should always be the user's requested size.
+	 */
+	I915_WRITE(DSPSIZE(plane),
+		   ((mode->vdisplay - 1) << 16) |
+		   (mode->hdisplay - 1));
+	I915_WRITE(DSPPOS(plane), 0);
+	I915_WRITE(PIPESRC(pipe),
+		   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+
+	I915_WRITE(PIPECONF(pipe), pipeconf);
+	POSTING_READ(PIPECONF(pipe));
+	intel_enable_pipe(dev_priv, pipe, false);
+
+	intel_wait_for_vblank(dev, pipe);
+
+	I915_WRITE(DSPCNTR(plane), dspcntr);
+	POSTING_READ(DSPCNTR(plane));
+	intel_enable_plane(dev_priv, plane, pipe);
+
+	ret = intel_pipe_set_base(crtc, x, y, old_fb);
+
+	intel_update_watermarks(dev);
+
+	return ret;
+}
+
+/*
+ * Initialize reference clocks when the driver loads
+ */
+void ironlake_init_pch_refclk(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+	u32 temp;
+	bool has_lvds = false;
+	bool has_cpu_edp = false;
+	bool has_pch_edp = false;
+	bool has_panel = false;
+	bool has_ck505 = false;
+	bool can_ssc = false;
+
+	/* We need to take the global config into account */
+	list_for_each_entry(encoder, &mode_config->encoder_list,
+			    base.head) {
+		switch (encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			has_panel = true;
+			has_lvds = true;
+			break;
+		case INTEL_OUTPUT_EDP:
+			has_panel = true;
+			if (intel_encoder_is_pch_edp(&encoder->base))
+				has_pch_edp = true;
+			else
+				has_cpu_edp = true;
+			break;
+		}
+	}
+
+	if (HAS_PCH_IBX(dev)) {
+		has_ck505 = dev_priv->display_clock_mode;
+		can_ssc = has_ck505;
+	} else {
+		has_ck505 = false;
+		can_ssc = true;
+	}
+
+	DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
+		      has_panel, has_lvds, has_pch_edp, has_cpu_edp,
+		      has_ck505);
+
+	/* Ironlake: try to setup display ref clock before DPLL
+	 * enabling. This is only under driver's control after
+	 * PCH B stepping, previous chipset stepping should be
+	 * ignoring this setting.
+	 */
+	temp = I915_READ(PCH_DREF_CONTROL);
+	/* Always enable nonspread source */
+	temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+
+	if (has_ck505)
+		temp |= DREF_NONSPREAD_CK505_ENABLE;
+	else
+		temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+
+	if (has_panel) {
+		temp &= ~DREF_SSC_SOURCE_MASK;
+		temp |= DREF_SSC_SOURCE_ENABLE;
+
+		/* SSC must be turned on before enabling the CPU output  */
+		if (intel_panel_use_ssc(dev_priv) && can_ssc) {
+			DRM_DEBUG_KMS("Using SSC on panel\n");
+			temp |= DREF_SSC1_ENABLE;
+		} else
+			temp &= ~DREF_SSC1_ENABLE;
+
+		/* Get SSC going before enabling the outputs */
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+		POSTING_READ(PCH_DREF_CONTROL);
+		udelay(200);
+
+		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+		/* Enable CPU source on CPU attached eDP */
+		if (has_cpu_edp) {
+			if (intel_panel_use_ssc(dev_priv) && can_ssc) {
+				DRM_DEBUG_KMS("Using SSC on eDP\n");
+				temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+			}
+			else
+				temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+		} else
+			temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+		POSTING_READ(PCH_DREF_CONTROL);
+		udelay(200);
+	} else {
+		DRM_DEBUG_KMS("Disabling SSC entirely\n");
+
+		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+		/* Turn off CPU output */
+		temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+		POSTING_READ(PCH_DREF_CONTROL);
+		udelay(200);
+
+		/* Turn off the SSC source */
+		temp &= ~DREF_SSC_SOURCE_MASK;
+		temp |= DREF_SSC_SOURCE_DISABLE;
+
+		/* Turn off SSC1 */
+		temp &= ~ DREF_SSC1_ENABLE;
+
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+		POSTING_READ(PCH_DREF_CONTROL);
+		udelay(200);
+	}
+}
+
+static int ironlake_get_refclk(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_encoder *encoder;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *edp_encoder = NULL;
+	int num_connectors = 0;
+	bool is_lvds = false;
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+		if (encoder->base.crtc != crtc)
+			continue;
+
+		switch (encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_EDP:
+			edp_encoder = encoder;
+			break;
+		}
+		num_connectors++;
+	}
+
+	if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
+		DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
+			      dev_priv->lvds_ssc_freq);
+		return dev_priv->lvds_ssc_freq * 1000;
+	}
+
+	return 120000;
+}
+
+static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode,
+				  int x, int y,
+				  struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	int refclk, num_connectors = 0;
+	intel_clock_t clock, reduced_clock;
+	u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
+	bool ok, has_reduced_clock = false, is_sdvo = false;
+	bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+	struct intel_encoder *has_edp_encoder = NULL;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *encoder;
+	const intel_limit_t *limit;
+	int ret;
+	struct fdi_m_n m_n = {0};
+	u32 temp;
+	u32 lvds_sync = 0;
+	int target_clock, pixel_multiplier, lane, link_bw, factor;
+	unsigned int pipe_bpp;
+	bool dither;
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+		if (encoder->base.crtc != crtc)
+			continue;
+
+		switch (encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_SDVO:
+		case INTEL_OUTPUT_HDMI:
+			is_sdvo = true;
+			if (encoder->needs_tv_clock)
+				is_tv = true;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = true;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = true;
+			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			is_dp = true;
+			break;
+		case INTEL_OUTPUT_EDP:
+			has_edp_encoder = encoder;
+			break;
+		}
+
+		num_connectors++;
+	}
+
+	refclk = ironlake_get_refclk(crtc);
+
+	/*
+	 * Returns a set of divisors for the desired target clock with the given
+	 * refclk, or FALSE.  The returned values represent the clock equation:
+	 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+	 */
+	limit = intel_limit(crtc, refclk);
+	ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
+			     &clock);
+	if (!ok) {
+		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	/* Ensure that the cursor is valid for the new mode before changing... */
+	intel_crtc_update_cursor(crtc, true);
+
+	if (is_lvds && dev_priv->lvds_downclock_avail) {
+		/*
+		 * Ensure we match the reduced clock's P to the target clock.
+		 * If the clocks don't match, we can't switch the display clock
+		 * by using the FP0/FP1. In such case we will disable the LVDS
+		 * downclock feature.
+		*/
+		has_reduced_clock = limit->find_pll(limit, crtc,
+						    dev_priv->lvds_downclock,
+						    refclk,
+						    &clock,
+						    &reduced_clock);
+	}
+	/* SDVO TV has fixed PLL values depend on its clock range,
+	   this mirrors vbios setting. */
+	if (is_sdvo && is_tv) {
+		if (adjusted_mode->clock >= 100000
+		    && adjusted_mode->clock < 140500) {
+			clock.p1 = 2;
+			clock.p2 = 10;
+			clock.n = 3;
+			clock.m1 = 16;
+			clock.m2 = 8;
+		} else if (adjusted_mode->clock >= 140500
+			   && adjusted_mode->clock <= 200000) {
+			clock.p1 = 1;
+			clock.p2 = 10;
+			clock.n = 6;
+			clock.m1 = 12;
+			clock.m2 = 8;
+		}
+	}
+
+	/* FDI link */
+	pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+	lane = 0;
+	/* CPU eDP doesn't require FDI link, so just set DP M/N
+	   according to current link config */
+	if (has_edp_encoder &&
+	    !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		target_clock = mode->clock;
+		intel_edp_link_config(has_edp_encoder,
+				      &lane, &link_bw);
+	} else {
+		/* [e]DP over FDI requires target mode clock
+		   instead of link clock */
+		if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
+			target_clock = mode->clock;
+		else
+			target_clock = adjusted_mode->clock;
+
+		/* FDI is a binary signal running at ~2.7GHz, encoding
+		 * each output octet as 10 bits. The actual frequency
+		 * is stored as a divider into a 100MHz clock, and the
+		 * mode pixel clock is stored in units of 1KHz.
+		 * Hence the bw of each lane in terms of the mode signal
+		 * is:
+		 */
+		link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+	}
+
+	/* determine panel color depth */
+	temp = I915_READ(PIPECONF(pipe));
+	temp &= ~PIPE_BPC_MASK;
+	dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode);
+	switch (pipe_bpp) {
+	case 18:
+		temp |= PIPE_6BPC;
+		break;
+	case 24:
+		temp |= PIPE_8BPC;
+		break;
+	case 30:
+		temp |= PIPE_10BPC;
+		break;
+	case 36:
+		temp |= PIPE_12BPC;
+		break;
+	default:
+		WARN(1, "intel_choose_pipe_bpp returned invalid value %d\n",
+			pipe_bpp);
+		temp |= PIPE_8BPC;
+		pipe_bpp = 24;
+		break;
+	}
+
+	intel_crtc->bpp = pipe_bpp;
+	I915_WRITE(PIPECONF(pipe), temp);
+
+	if (!lane) {
+		/*
+		 * Account for spread spectrum to avoid
+		 * oversubscribing the link. Max center spread
+		 * is 2.5%; use 5% for safety's sake.
+		 */
+		u32 bps = target_clock * intel_crtc->bpp * 21 / 20;
+		lane = bps / (link_bw * 8) + 1;
+	}
+
+	intel_crtc->fdi_lanes = lane;
+
+	if (pixel_multiplier > 1)
+		link_bw *= pixel_multiplier;
+	ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
+			     &m_n);
+
+	fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+	if (has_reduced_clock)
+		fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
+			reduced_clock.m2;
+
+	/* Enable autotuning of the PLL clock (if permissible) */
+	factor = 21;
+	if (is_lvds) {
+		if ((intel_panel_use_ssc(dev_priv) &&
+		     dev_priv->lvds_ssc_freq == 100) ||
+		    (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
+			factor = 25;
+	} else if (is_sdvo && is_tv)
+		factor = 20;
+
+	if (clock.m < factor * clock.n)
+		fp |= FP_CB_TUNE;
+
+	dpll = 0;
+
+	if (is_lvds)
+		dpll |= DPLLB_MODE_LVDS;
+	else
+		dpll |= DPLLB_MODE_DAC_SERIAL;
+	if (is_sdvo) {
+		int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+		if (pixel_multiplier > 1) {
+			dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
+		}
+		dpll |= DPLL_DVO_HIGH_SPEED;
+	}
+	if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
+		dpll |= DPLL_DVO_HIGH_SPEED;
+
+	/* compute bitmask from p1 value */
+	dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+	/* also FPA1 */
+	dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+
+	switch (clock.p2) {
+	case 5:
+		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+		break;
+	case 7:
+		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+		break;
+	case 10:
+		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+		break;
+	case 14:
+		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+		break;
+	}
+
+	if (is_sdvo && is_tv)
+		dpll |= PLL_REF_INPUT_TVCLKINBC;
+	else if (is_tv)
+		/* XXX: just matching BIOS for now */
+		/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
+		dpll |= 3;
+	else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+	else
+		dpll |= PLL_REF_INPUT_DREFCLK;
+
+	/* setup pipeconf */
+	pipeconf = I915_READ(PIPECONF(pipe));
+
+	/* Set up the display plane register */
+	dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+	DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
+	drm_mode_debug_printmodeline(mode);
+
+	/* PCH eDP needs FDI, but CPU eDP does not */
+	if (!intel_crtc->no_pll) {
+		if (!has_edp_encoder ||
+		    intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+			I915_WRITE(PCH_FP0(pipe), fp);
+			I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
+
+			POSTING_READ(PCH_DPLL(pipe));
+			udelay(150);
+		}
+	} else {
+		if (dpll == (I915_READ(PCH_DPLL(0)) & 0x7fffffff) &&
+		    fp == I915_READ(PCH_FP0(0))) {
+			intel_crtc->use_pll_a = true;
+			DRM_DEBUG_KMS("using pipe a dpll\n");
+		} else if (dpll == (I915_READ(PCH_DPLL(1)) & 0x7fffffff) &&
+			   fp == I915_READ(PCH_FP0(1))) {
+			intel_crtc->use_pll_a = false;
+			DRM_DEBUG_KMS("using pipe b dpll\n");
+		} else {
+			DRM_DEBUG_KMS("no matching PLL configuration for pipe 2\n");
+			return -EINVAL;
+		}
+	}
+
+	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+	 * This is an exception to the general rule that mode_set doesn't turn
+	 * things on.
+	 */
+	if (is_lvds) {
+		temp = I915_READ(PCH_LVDS);
+		temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+		if (HAS_PCH_CPT(dev)) {
+			temp &= ~PORT_TRANS_SEL_MASK;
+			temp |= PORT_TRANS_SEL_CPT(pipe);
+		} else {
+			if (pipe == 1)
+				temp |= LVDS_PIPEB_SELECT;
+			else
+				temp &= ~LVDS_PIPEB_SELECT;
+		}
+
+		/* set the corresponsding LVDS_BORDER bit */
+		temp |= dev_priv->lvds_border_bits;
+		/* Set the B0-B3 data pairs corresponding to whether we're going to
+		 * set the DPLLs for dual-channel mode or not.
+		 */
+		if (clock.p2 == 7)
+			temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+		else
+			temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+		 * appropriately here, but we need to look more thoroughly into how
+		 * panels behave in the two modes.
+		 */
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+			lvds_sync |= LVDS_HSYNC_POLARITY;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+			lvds_sync |= LVDS_VSYNC_POLARITY;
+		if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
+		    != lvds_sync) {
+			char flags[2] = "-+";
+			DRM_INFO("Changing LVDS panel from "
+				 "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
+				 flags[!(temp & LVDS_HSYNC_POLARITY)],
+				 flags[!(temp & LVDS_VSYNC_POLARITY)],
+				 flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
+				 flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
+			temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+			temp |= lvds_sync;
+		}
+		I915_WRITE(PCH_LVDS, temp);
+	}
+
+	pipeconf &= ~PIPECONF_DITHER_EN;
+	pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
+	if ((is_lvds && dev_priv->lvds_dither) || dither) {
+		pipeconf |= PIPECONF_DITHER_EN;
+		pipeconf |= PIPECONF_DITHER_TYPE_SP;
+	}
+	if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		intel_dp_set_m_n(crtc, mode, adjusted_mode);
+	} else {
+		/* For non-DP output, clear any trans DP clock recovery setting.*/
+		I915_WRITE(TRANSDATA_M1(pipe), 0);
+		I915_WRITE(TRANSDATA_N1(pipe), 0);
+		I915_WRITE(TRANSDPLINK_M1(pipe), 0);
+		I915_WRITE(TRANSDPLINK_N1(pipe), 0);
+	}
+
+	if (!intel_crtc->no_pll &&
+	    (!has_edp_encoder ||
+	     intel_encoder_is_pch_edp(&has_edp_encoder->base))) {
+		I915_WRITE(PCH_DPLL(pipe), dpll);
+
+		/* Wait for the clocks to stabilize. */
+		POSTING_READ(PCH_DPLL(pipe));
+		udelay(150);
+
+		/* The pixel multiplier can only be updated once the
+		 * DPLL is enabled and the clocks are stable.
+		 *
+		 * So write it again.
+		 */
+		I915_WRITE(PCH_DPLL(pipe), dpll);
+	}
+
+	intel_crtc->lowfreq_avail = false;
+	if (!intel_crtc->no_pll) {
+		if (is_lvds && has_reduced_clock && i915_powersave) {
+			I915_WRITE(PCH_FP1(pipe), fp2);
+			intel_crtc->lowfreq_avail = true;
+			if (HAS_PIPE_CXSR(dev)) {
+				DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+				pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+			}
+		} else {
+			I915_WRITE(PCH_FP1(pipe), fp);
+			if (HAS_PIPE_CXSR(dev)) {
+				DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+				pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+			}
+		}
+	}
+
+	pipeconf &= ~PIPECONF_INTERLACE_MASK;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		pipeconf |= PIPECONF_INTERLACED_ILK;
+		/* the chip adds 2 halflines automatically */
+		adjusted_mode->crtc_vtotal -= 1;
+		adjusted_mode->crtc_vblank_end -= 1;
+		I915_WRITE(VSYNCSHIFT(pipe),
+			   adjusted_mode->crtc_hsync_start
+			   - adjusted_mode->crtc_htotal/2);
+	} else {
+		pipeconf |= PIPECONF_PROGRESSIVE;
+		I915_WRITE(VSYNCSHIFT(pipe), 0);
+	}
+
+	I915_WRITE(HTOTAL(pipe),
+		   (adjusted_mode->crtc_hdisplay - 1) |
+		   ((adjusted_mode->crtc_htotal - 1) << 16));
+	I915_WRITE(HBLANK(pipe),
+		   (adjusted_mode->crtc_hblank_start - 1) |
+		   ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	I915_WRITE(HSYNC(pipe),
+		   (adjusted_mode->crtc_hsync_start - 1) |
+		   ((adjusted_mode->crtc_hsync_end - 1) << 16));
+
+	I915_WRITE(VTOTAL(pipe),
+		   (adjusted_mode->crtc_vdisplay - 1) |
+		   ((adjusted_mode->crtc_vtotal - 1) << 16));
+	I915_WRITE(VBLANK(pipe),
+		   (adjusted_mode->crtc_vblank_start - 1) |
+		   ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	I915_WRITE(VSYNC(pipe),
+		   (adjusted_mode->crtc_vsync_start - 1) |
+		   ((adjusted_mode->crtc_vsync_end - 1) << 16));
+
+	/* pipesrc controls the size that is scaled from, which should
+	 * always be the user's requested size.
+	 */
+	I915_WRITE(PIPESRC(pipe),
+		   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+
+	I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
+	I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
+	I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
+	I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
+
+	if (has_edp_encoder &&
+	    !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		ironlake_set_pll_edp(crtc, adjusted_mode->clock);
+	}
+
+	I915_WRITE(PIPECONF(pipe), pipeconf);
+	POSTING_READ(PIPECONF(pipe));
+
+	intel_wait_for_vblank(dev, pipe);
+
+	I915_WRITE(DSPCNTR(plane), dspcntr);
+	POSTING_READ(DSPCNTR(plane));
+
+	ret = intel_pipe_set_base(crtc, x, y, old_fb);
+
+	intel_update_watermarks(dev);
+
+	return ret;
+}
+
+static int intel_crtc_mode_set(struct drm_crtc *crtc,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode,
+			       int x, int y,
+			       struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int ret;
+
+	drm_vblank_pre_modeset(dev, pipe);
+
+	ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
+					      x, y, old_fb);
+	drm_vblank_post_modeset(dev, pipe);
+
+	if (ret)
+		intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
+	else
+		intel_crtc->dpms_mode = DRM_MODE_DPMS_ON;
+
+	return ret;
+}
+
+static bool intel_eld_uptodate(struct drm_connector *connector,
+			       int reg_eldv, uint32_t bits_eldv,
+			       int reg_elda, uint32_t bits_elda,
+			       int reg_edid)
+{
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	uint8_t *eld = connector->eld;
+	uint32_t i;
+
+	i = I915_READ(reg_eldv);
+	i &= bits_eldv;
+
+	if (!eld[0])
+		return !i;
+
+	if (!i)
+		return false;
+
+	i = I915_READ(reg_elda);
+	i &= ~bits_elda;
+	I915_WRITE(reg_elda, i);
+
+	for (i = 0; i < eld[2]; i++)
+		if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
+			return false;
+
+	return true;
+}
+
+static void g4x_write_eld(struct drm_connector *connector,
+			  struct drm_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	uint8_t *eld = connector->eld;
+	uint32_t eldv;
+	uint32_t len;
+	uint32_t i;
+
+	i = I915_READ(G4X_AUD_VID_DID);
+
+	if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
+		eldv = G4X_ELDV_DEVCL_DEVBLC;
+	else
+		eldv = G4X_ELDV_DEVCTG;
+
+	if (intel_eld_uptodate(connector,
+			       G4X_AUD_CNTL_ST, eldv,
+			       G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
+			       G4X_HDMIW_HDMIEDID))
+		return;
+
+	i = I915_READ(G4X_AUD_CNTL_ST);
+	i &= ~(eldv | G4X_ELD_ADDR);
+	len = (i >> 9) & 0x1f;		/* ELD buffer size */
+	I915_WRITE(G4X_AUD_CNTL_ST, i);
+
+	if (!eld[0])
+		return;
+
+	len = min_t(uint8_t, eld[2], len);
+	DRM_DEBUG_DRIVER("ELD size %d\n", len);
+	for (i = 0; i < len; i++)
+		I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
+
+	i = I915_READ(G4X_AUD_CNTL_ST);
+	i |= eldv;
+	I915_WRITE(G4X_AUD_CNTL_ST, i);
+}
+
+static void ironlake_write_eld(struct drm_connector *connector,
+				     struct drm_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	uint8_t *eld = connector->eld;
+	uint32_t eldv;
+	uint32_t i;
+	int len;
+	int hdmiw_hdmiedid;
+	int aud_config;
+	int aud_cntl_st;
+	int aud_cntrl_st2;
+
+	if (HAS_PCH_IBX(connector->dev)) {
+		hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
+		aud_config = IBX_AUD_CONFIG_A;
+		aud_cntl_st = IBX_AUD_CNTL_ST_A;
+		aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
+	} else {
+		hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
+		aud_config = CPT_AUD_CONFIG_A;
+		aud_cntl_st = CPT_AUD_CNTL_ST_A;
+		aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
+	}
+
+	i = to_intel_crtc(crtc)->pipe;
+	hdmiw_hdmiedid += i * 0x100;
+	aud_cntl_st += i * 0x100;
+	aud_config += i * 0x100;
+
+	DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i));
+
+	i = I915_READ(aud_cntl_st);
+	i = (i >> 29) & 0x3;		/* DIP_Port_Select, 0x1 = PortB */
+	if (!i) {
+		DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
+		/* operate blindly on all ports */
+		eldv = IBX_ELD_VALIDB;
+		eldv |= IBX_ELD_VALIDB << 4;
+		eldv |= IBX_ELD_VALIDB << 8;
+	} else {
+		DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
+		eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
+	}
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+		DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
+		eld[5] |= (1 << 2);	/* Conn_Type, 0x1 = DisplayPort */
+		I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
+	} else
+		I915_WRITE(aud_config, 0);
+
+	if (intel_eld_uptodate(connector,
+			       aud_cntrl_st2, eldv,
+			       aud_cntl_st, IBX_ELD_ADDRESS,
+			       hdmiw_hdmiedid))
+		return;
+
+	i = I915_READ(aud_cntrl_st2);
+	i &= ~eldv;
+	I915_WRITE(aud_cntrl_st2, i);
+
+	if (!eld[0])
+		return;
+
+	i = I915_READ(aud_cntl_st);
+	i &= ~IBX_ELD_ADDRESS;
+	I915_WRITE(aud_cntl_st, i);
+
+	len = min_t(uint8_t, eld[2], 21);	/* 84 bytes of hw ELD buffer */
+	DRM_DEBUG_DRIVER("ELD size %d\n", len);
+	for (i = 0; i < len; i++)
+		I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
+
+	i = I915_READ(aud_cntrl_st2);
+	i |= eldv;
+	I915_WRITE(aud_cntrl_st2, i);
+}
+
+void intel_write_eld(struct drm_encoder *encoder,
+		     struct drm_display_mode *mode)
+{
+	struct drm_crtc *crtc = encoder->crtc;
+	struct drm_connector *connector;
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	connector = drm_select_eld(encoder, mode);
+	if (!connector)
+		return;
+
+	DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
+			 connector->base.id,
+			 drm_get_connector_name(connector),
+			 connector->encoder->base.id,
+			 drm_get_encoder_name(connector->encoder));
+
+	connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
+
+	if (dev_priv->display.write_eld)
+		dev_priv->display.write_eld(connector, crtc);
+}
+
+/** Loads the palette/gamma unit for the CRTC with the prepared values */
+void intel_crtc_load_lut(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int palreg = PALETTE(intel_crtc->pipe);
+	int i;
+
+	/* The clocks have to be on to load the palette. */
+	if (!crtc->enabled || !intel_crtc->active)
+		return;
+
+	/* use legacy palette for Ironlake */
+	if (HAS_PCH_SPLIT(dev))
+		palreg = LGC_PALETTE(intel_crtc->pipe);
+
+	for (i = 0; i < 256; i++) {
+		I915_WRITE(palreg + 4 * i,
+			   (intel_crtc->lut_r[i] << 16) |
+			   (intel_crtc->lut_g[i] << 8) |
+			   intel_crtc->lut_b[i]);
+	}
+}
+
+static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	bool visible = base != 0;
+	u32 cntl;
+
+	if (intel_crtc->cursor_visible == visible)
+		return;
+
+	cntl = I915_READ(_CURACNTR);
+	if (visible) {
+		/* On these chipsets we can only modify the base whilst
+		 * the cursor is disabled.
+		 */
+		I915_WRITE(_CURABASE, base);
+
+		cntl &= ~(CURSOR_FORMAT_MASK);
+		/* XXX width must be 64, stride 256 => 0x00 << 28 */
+		cntl |= CURSOR_ENABLE |
+			CURSOR_GAMMA_ENABLE |
+			CURSOR_FORMAT_ARGB;
+	} else
+		cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
+	I915_WRITE(_CURACNTR, cntl);
+
+	intel_crtc->cursor_visible = visible;
+}
+
+static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	bool visible = base != 0;
+
+	if (intel_crtc->cursor_visible != visible) {
+		uint32_t cntl = I915_READ(CURCNTR(pipe));
+		if (base) {
+			cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
+			cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+			cntl |= pipe << 28; /* Connect to correct pipe */
+		} else {
+			cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+			cntl |= CURSOR_MODE_DISABLE;
+		}
+		I915_WRITE(CURCNTR(pipe), cntl);
+
+		intel_crtc->cursor_visible = visible;
+	}
+	/* and commit changes on next vblank */
+	I915_WRITE(CURBASE(pipe), base);
+}
+
+static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	bool visible = base != 0;
+
+	if (intel_crtc->cursor_visible != visible) {
+		uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
+		if (base) {
+			cntl &= ~CURSOR_MODE;
+			cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+		} else {
+			cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+			cntl |= CURSOR_MODE_DISABLE;
+		}
+		I915_WRITE(CURCNTR_IVB(pipe), cntl);
+
+		intel_crtc->cursor_visible = visible;
+	}
+	/* and commit changes on next vblank */
+	I915_WRITE(CURBASE_IVB(pipe), base);
+}
+
+/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
+static void intel_crtc_update_cursor(struct drm_crtc *crtc,
+				     bool on)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int x = intel_crtc->cursor_x;
+	int y = intel_crtc->cursor_y;
+	u32 base, pos;
+	bool visible;
+
+	pos = 0;
+
+	if (on && crtc->enabled && crtc->fb) {
+		base = intel_crtc->cursor_addr;
+		if (x > (int) crtc->fb->width)
+			base = 0;
+
+		if (y > (int) crtc->fb->height)
+			base = 0;
+	} else
+		base = 0;
+
+	if (x < 0) {
+		if (x + intel_crtc->cursor_width < 0)
+			base = 0;
+
+		pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
+		x = -x;
+	}
+	pos |= x << CURSOR_X_SHIFT;
+
+	if (y < 0) {
+		if (y + intel_crtc->cursor_height < 0)
+			base = 0;
+
+		pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
+		y = -y;
+	}
+	pos |= y << CURSOR_Y_SHIFT;
+
+	visible = base != 0;
+	if (!visible && !intel_crtc->cursor_visible)
+		return;
+
+	if (IS_IVYBRIDGE(dev)) {
+		I915_WRITE(CURPOS_IVB(pipe), pos);
+		ivb_update_cursor(crtc, base);
+	} else {
+		I915_WRITE(CURPOS(pipe), pos);
+		if (IS_845G(dev) || IS_I865G(dev))
+			i845_update_cursor(crtc, base);
+		else
+			i9xx_update_cursor(crtc, base);
+	}
+
+	if (visible)
+		intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
+}
+
+static int intel_crtc_cursor_set(struct drm_crtc *crtc,
+				 struct drm_file *file,
+				 uint32_t handle,
+				 uint32_t width, uint32_t height)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_i915_gem_object *obj;
+	uint32_t addr;
+	int ret;
+
+	DRM_DEBUG_KMS("\n");
+
+	/* if we want to turn off the cursor ignore width and height */
+	if (!handle) {
+		DRM_DEBUG_KMS("cursor off\n");
+		addr = 0;
+		obj = NULL;
+		mutex_lock(&dev->struct_mutex);
+		goto finish;
+	}
+
+	/* Currently we only support 64x64 cursors */
+	if (width != 64 || height != 64) {
+		DRM_ERROR("we currently only support 64x64 cursors\n");
+		return -EINVAL;
+	}
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
+	if (&obj->base == NULL)
+		return -ENOENT;
+
+	if (obj->base.size < width * height * 4) {
+		DRM_ERROR("buffer is to small\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	/* we only need to pin inside GTT if cursor is non-phy */
+	mutex_lock(&dev->struct_mutex);
+	if (!dev_priv->info->cursor_needs_physical) {
+		if (obj->tiling_mode) {
+			DRM_ERROR("cursor cannot be tiled\n");
+			ret = -EINVAL;
+			goto fail_locked;
+		}
+
+		ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL);
+		if (ret) {
+			DRM_ERROR("failed to move cursor bo into the GTT\n");
+			goto fail_locked;
+		}
+
+		ret = i915_gem_object_put_fence(obj);
+		if (ret) {
+			DRM_ERROR("failed to release fence for cursor");
+			goto fail_unpin;
+		}
+
+		addr = obj->gtt_offset;
+	} else {
+		int align = IS_I830(dev) ? 16 * 1024 : 256;
+		ret = i915_gem_attach_phys_object(dev, obj,
+						  (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
+						  align);
+		if (ret) {
+			DRM_ERROR("failed to attach phys object\n");
+			goto fail_locked;
+		}
+		addr = obj->phys_obj->handle->busaddr;
+	}
+
+	if (IS_GEN2(dev))
+		I915_WRITE(CURSIZE, (height << 12) | width);
+
+ finish:
+	if (intel_crtc->cursor_bo) {
+		if (dev_priv->info->cursor_needs_physical) {
+			if (intel_crtc->cursor_bo != obj)
+				i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
+		} else
+			i915_gem_object_unpin(intel_crtc->cursor_bo);
+		drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	intel_crtc->cursor_addr = addr;
+	intel_crtc->cursor_bo = obj;
+	intel_crtc->cursor_width = width;
+	intel_crtc->cursor_height = height;
+
+	intel_crtc_update_cursor(crtc, true);
+
+	return 0;
+fail_unpin:
+	i915_gem_object_unpin(obj);
+fail_locked:
+	mutex_unlock(&dev->struct_mutex);
+fail:
+	drm_gem_object_unreference_unlocked(&obj->base);
+	return ret;
+}
+
+static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	intel_crtc->cursor_x = x;
+	intel_crtc->cursor_y = y;
+
+	intel_crtc_update_cursor(crtc, true);
+
+	return 0;
+}
+
+/** Sets the color ramps on behalf of RandR */
+void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+				 u16 blue, int regno)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	intel_crtc->lut_r[regno] = red >> 8;
+	intel_crtc->lut_g[regno] = green >> 8;
+	intel_crtc->lut_b[regno] = blue >> 8;
+}
+
+void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+			     u16 *blue, int regno)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	*red = intel_crtc->lut_r[regno] << 8;
+	*green = intel_crtc->lut_g[regno] << 8;
+	*blue = intel_crtc->lut_b[regno] << 8;
+}
+
+static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
+				 u16 *blue, uint32_t start, uint32_t size)
+{
+	int end = (start + size > 256) ? 256 : start + size, i;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	for (i = start; i < end; i++) {
+		intel_crtc->lut_r[i] = red[i] >> 8;
+		intel_crtc->lut_g[i] = green[i] >> 8;
+		intel_crtc->lut_b[i] = blue[i] >> 8;
+	}
+
+	intel_crtc_load_lut(crtc);
+}
+
+/**
+ * Get a pipe with a simple mode set on it for doing load-based monitor
+ * detection.
+ *
+ * It will be up to the load-detect code to adjust the pipe as appropriate for
+ * its requirements.  The pipe will be connected to no other encoders.
+ *
+ * Currently this code will only succeed if there is a pipe with no encoders
+ * configured for it.  In the future, it could choose to temporarily disable
+ * some outputs to free up a pipe for its use.
+ *
+ * \return crtc, or NULL if no pipes are available.
+ */
+
+/* VESA 640x480x72Hz mode to set on the pipe */
+static struct drm_display_mode load_detect_mode = {
+	DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
+		 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
+};
+
+static struct drm_framebuffer *
+intel_framebuffer_create(struct drm_device *dev,
+			 struct drm_mode_fb_cmd2 *mode_cmd,
+			 struct drm_i915_gem_object *obj)
+{
+	struct intel_framebuffer *intel_fb;
+	int ret;
+
+	intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
+	if (!intel_fb) {
+		drm_gem_object_unreference_unlocked(&obj->base);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
+	if (ret) {
+		drm_gem_object_unreference_unlocked(&obj->base);
+		kfree(intel_fb);
+		return ERR_PTR(ret);
+	}
+
+	return &intel_fb->base;
+}
+
+static u32
+intel_framebuffer_pitch_for_width(int width, int bpp)
+{
+	u32 pitch = DIV_ROUND_UP(width * bpp, 8);
+	return ALIGN(pitch, 64);
+}
+
+static u32
+intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
+{
+	u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
+	return ALIGN(pitch * mode->vdisplay, PAGE_SIZE);
+}
+
+static struct drm_framebuffer *
+intel_framebuffer_create_for_mode(struct drm_device *dev,
+				  struct drm_display_mode *mode,
+				  int depth, int bpp)
+{
+	struct drm_i915_gem_object *obj;
+	struct drm_mode_fb_cmd2 mode_cmd;
+
+	obj = i915_gem_alloc_object(dev,
+				    intel_framebuffer_size_for_mode(mode, bpp));
+	if (obj == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	mode_cmd.width = mode->hdisplay;
+	mode_cmd.height = mode->vdisplay;
+	mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
+								bpp);
+	mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
+
+	return intel_framebuffer_create(dev, &mode_cmd, obj);
+}
+
+static struct drm_framebuffer *
+mode_fits_in_fbdev(struct drm_device *dev,
+		   struct drm_display_mode *mode)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	struct drm_framebuffer *fb;
+
+	if (dev_priv->fbdev == NULL)
+		return NULL;
+
+	obj = dev_priv->fbdev->ifb.obj;
+	if (obj == NULL)
+		return NULL;
+
+	fb = &dev_priv->fbdev->ifb.base;
+	if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
+							       fb->bits_per_pixel))
+		return NULL;
+
+	if (obj->base.size < mode->vdisplay * fb->pitches[0])
+		return NULL;
+
+	return fb;
+}
+
+bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
+				struct drm_connector *connector,
+				struct drm_display_mode *mode,
+				struct intel_load_detect_pipe *old)
+{
+	struct intel_crtc *intel_crtc;
+	struct drm_crtc *possible_crtc;
+	struct drm_encoder *encoder = &intel_encoder->base;
+	struct drm_crtc *crtc = NULL;
+	struct drm_device *dev = encoder->dev;
+	struct drm_framebuffer *old_fb;
+	int i = -1;
+
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
+		      connector->base.id, drm_get_connector_name(connector),
+		      encoder->base.id, drm_get_encoder_name(encoder));
+
+	/*
+	 * Algorithm gets a little messy:
+	 *
+	 *   - if the connector already has an assigned crtc, use it (but make
+	 *     sure it's on first)
+	 *
+	 *   - try to find the first unused crtc that can drive this connector,
+	 *     and use that if we find one
+	 */
+
+	/* See if we already have a CRTC for this connector */
+	if (encoder->crtc) {
+		crtc = encoder->crtc;
+
+		intel_crtc = to_intel_crtc(crtc);
+		old->dpms_mode = intel_crtc->dpms_mode;
+		old->load_detect_temp = false;
+
+		/* Make sure the crtc and connector are running */
+		if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
+			struct drm_encoder_helper_funcs *encoder_funcs;
+			struct drm_crtc_helper_funcs *crtc_funcs;
+
+			crtc_funcs = crtc->helper_private;
+			crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+
+			encoder_funcs = encoder->helper_private;
+			encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+		}
+
+		return true;
+	}
+
+	/* Find an unused one (if possible) */
+	list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
+		i++;
+		if (!(encoder->possible_crtcs & (1 << i)))
+			continue;
+		if (!possible_crtc->enabled) {
+			crtc = possible_crtc;
+			break;
+		}
+	}
+
+	/*
+	 * If we didn't find an unused CRTC, don't use any.
+	 */
+	if (!crtc) {
+		DRM_DEBUG_KMS("no pipe available for load-detect\n");
+		return false;
+	}
+
+	encoder->crtc = crtc;
+	connector->encoder = encoder;
+
+	intel_crtc = to_intel_crtc(crtc);
+	old->dpms_mode = intel_crtc->dpms_mode;
+	old->load_detect_temp = true;
+	old->release_fb = NULL;
+
+	if (!mode)
+		mode = &load_detect_mode;
+
+	old_fb = crtc->fb;
+
+	/* We need a framebuffer large enough to accommodate all accesses
+	 * that the plane may generate whilst we perform load detection.
+	 * We can not rely on the fbcon either being present (we get called
+	 * during its initialisation to detect all boot displays, or it may
+	 * not even exist) or that it is large enough to satisfy the
+	 * requested mode.
+	 */
+	crtc->fb = mode_fits_in_fbdev(dev, mode);
+	if (crtc->fb == NULL) {
+		DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
+		crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
+		old->release_fb = crtc->fb;
+	} else
+		DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
+	if (IS_ERR(crtc->fb)) {
+		DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
+		crtc->fb = old_fb;
+		return false;
+	}
+
+	if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) {
+		DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
+		if (old->release_fb)
+			old->release_fb->funcs->destroy(old->release_fb);
+		crtc->fb = old_fb;
+		return false;
+	}
+
+	/* let the connector get through one full cycle before testing */
+	intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+	return true;
+}
+
+void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
+				    struct drm_connector *connector,
+				    struct intel_load_detect_pipe *old)
+{
+	struct drm_encoder *encoder = &intel_encoder->base;
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
+		      connector->base.id, drm_get_connector_name(connector),
+		      encoder->base.id, drm_get_encoder_name(encoder));
+
+	if (old->load_detect_temp) {
+		connector->encoder = NULL;
+		drm_helper_disable_unused_functions(dev);
+
+		if (old->release_fb)
+			old->release_fb->funcs->destroy(old->release_fb);
+
+		return;
+	}
+
+	/* Switch crtc and encoder back off if necessary */
+	if (old->dpms_mode != DRM_MODE_DPMS_ON) {
+		encoder_funcs->dpms(encoder, old->dpms_mode);
+		crtc_funcs->dpms(crtc, old->dpms_mode);
+	}
+}
+
+/* Returns the clock of the currently programmed mode of the given pipe. */
+static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 dpll = I915_READ(DPLL(pipe));
+	u32 fp;
+	intel_clock_t clock;
+
+	if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+		fp = I915_READ(FP0(pipe));
+	else
+		fp = I915_READ(FP1(pipe));
+
+	clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
+	if (IS_PINEVIEW(dev)) {
+		clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
+		clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
+	} else {
+		clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
+		clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
+	}
+
+	if (!IS_GEN2(dev)) {
+		if (IS_PINEVIEW(dev))
+			clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
+				DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
+		else
+			clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
+			       DPLL_FPA01_P1_POST_DIV_SHIFT);
+
+		switch (dpll & DPLL_MODE_MASK) {
+		case DPLLB_MODE_DAC_SERIAL:
+			clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
+				5 : 10;
+			break;
+		case DPLLB_MODE_LVDS:
+			clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
+				7 : 14;
+			break;
+		default:
+			DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
+				  "mode\n", (int)(dpll & DPLL_MODE_MASK));
+			return 0;
+		}
+
+		/* XXX: Handle the 100Mhz refclk */
+		intel_clock(dev, 96000, &clock);
+	} else {
+		bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
+
+		if (is_lvds) {
+			clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
+				       DPLL_FPA01_P1_POST_DIV_SHIFT);
+			clock.p2 = 14;
+
+			if ((dpll & PLL_REF_INPUT_MASK) ==
+			    PLLB_REF_INPUT_SPREADSPECTRUMIN) {
+				/* XXX: might not be 66MHz */
+				intel_clock(dev, 66000, &clock);
+			} else
+				intel_clock(dev, 48000, &clock);
+		} else {
+			if (dpll & PLL_P1_DIVIDE_BY_TWO)
+				clock.p1 = 2;
+			else {
+				clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
+					    DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
+			}
+			if (dpll & PLL_P2_DIVIDE_BY_4)
+				clock.p2 = 4;
+			else
+				clock.p2 = 2;
+
+			intel_clock(dev, 48000, &clock);
+		}
+	}
+
+	/* XXX: It would be nice to validate the clocks, but we can't reuse
+	 * i830PllIsValid() because it relies on the xf86_config connector
+	 * configuration being accurate, which it isn't necessarily.
+	 */
+
+	return clock.dot;
+}
+
+/** Returns the currently programmed mode of the given pipe. */
+struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
+					     struct drm_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	struct drm_display_mode *mode;
+	int htot = I915_READ(HTOTAL(pipe));
+	int hsync = I915_READ(HSYNC(pipe));
+	int vtot = I915_READ(VTOTAL(pipe));
+	int vsync = I915_READ(VSYNC(pipe));
+
+	mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+	if (!mode)
+		return NULL;
+
+	mode->clock = intel_crtc_clock_get(dev, crtc);
+	mode->hdisplay = (htot & 0xffff) + 1;
+	mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
+	mode->hsync_start = (hsync & 0xffff) + 1;
+	mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
+	mode->vdisplay = (vtot & 0xffff) + 1;
+	mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
+	mode->vsync_start = (vsync & 0xffff) + 1;
+	mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
+
+	drm_mode_set_name(mode);
+	drm_mode_set_crtcinfo(mode, 0);
+
+	return mode;
+}
+
+#define GPU_IDLE_TIMEOUT 500 /* ms */
+
+/* When this timer fires, we've been idle for awhile */
+static void intel_gpu_idle_timer(unsigned long arg)
+{
+	struct drm_device *dev = (struct drm_device *)arg;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (!list_empty(&dev_priv->mm.active_list)) {
+		/* Still processing requests, so just re-arm the timer. */
+		mod_timer(&dev_priv->idle_timer, jiffies +
+			  msecs_to_jiffies(GPU_IDLE_TIMEOUT));
+		return;
+	}
+
+	dev_priv->busy = false;
+	queue_work(dev_priv->wq, &dev_priv->idle_work);
+}
+
+#define CRTC_IDLE_TIMEOUT 1000 /* ms */
+
+static void intel_crtc_idle_timer(unsigned long arg)
+{
+	struct intel_crtc *intel_crtc = (struct intel_crtc *)arg;
+	struct drm_crtc *crtc = &intel_crtc->base;
+	drm_i915_private_t *dev_priv = crtc->dev->dev_private;
+	struct intel_framebuffer *intel_fb;
+
+	intel_fb = to_intel_framebuffer(crtc->fb);
+	if (intel_fb && intel_fb->obj->active) {
+		/* The framebuffer is still being accessed by the GPU. */
+		mod_timer(&intel_crtc->idle_timer, jiffies +
+			  msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
+		return;
+	}
+
+	intel_crtc->busy = false;
+	queue_work(dev_priv->wq, &dev_priv->idle_work);
+}
+
+static void intel_increase_pllclock(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int dpll_reg = DPLL(pipe);
+	int dpll;
+
+	if (HAS_PCH_SPLIT(dev))
+		return;
+
+	if (!dev_priv->lvds_downclock_avail)
+		return;
+
+	dpll = I915_READ(dpll_reg);
+	if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
+		DRM_DEBUG_DRIVER("upclocking LVDS\n");
+
+		assert_panel_unlocked(dev_priv, pipe);
+
+		dpll &= ~DISPLAY_RATE_SELECT_FPA1;
+		I915_WRITE(dpll_reg, dpll);
+		intel_wait_for_vblank(dev, pipe);
+
+		dpll = I915_READ(dpll_reg);
+		if (dpll & DISPLAY_RATE_SELECT_FPA1)
+			DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
+	}
+
+	/* Schedule downclock */
+	mod_timer(&intel_crtc->idle_timer, jiffies +
+		  msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
+}
+
+static void intel_decrease_pllclock(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	if (HAS_PCH_SPLIT(dev))
+		return;
+
+	if (!dev_priv->lvds_downclock_avail)
+		return;
+
+	/*
+	 * Since this is called by a timer, we should never get here in
+	 * the manual case.
+	 */
+	if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
+		int pipe = intel_crtc->pipe;
+		int dpll_reg = DPLL(pipe);
+		u32 dpll;
+
+		DRM_DEBUG_DRIVER("downclocking LVDS\n");
+
+		assert_panel_unlocked(dev_priv, pipe);
+
+		dpll = I915_READ(dpll_reg);
+		dpll |= DISPLAY_RATE_SELECT_FPA1;
+		I915_WRITE(dpll_reg, dpll);
+		intel_wait_for_vblank(dev, pipe);
+		dpll = I915_READ(dpll_reg);
+		if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
+			DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
+	}
+}
+
+/**
+ * intel_idle_update - adjust clocks for idleness
+ * @work: work struct
+ *
+ * Either the GPU or display (or both) went idle.  Check the busy status
+ * here and adjust the CRTC and GPU clocks as necessary.
+ */
+static void intel_idle_update(struct work_struct *work)
+{
+	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+						    idle_work);
+	struct drm_device *dev = dev_priv->dev;
+	struct drm_crtc *crtc;
+	struct intel_crtc *intel_crtc;
+
+	if (!i915_powersave)
+		return;
+
+	mutex_lock(&dev->struct_mutex);
+
+	i915_update_gfx_val(dev_priv);
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		/* Skip inactive CRTCs */
+		if (!crtc->fb)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		if (!intel_crtc->busy)
+			intel_decrease_pllclock(crtc);
+	}
+
+
+	mutex_unlock(&dev->struct_mutex);
+}
+
+/**
+ * intel_mark_busy - mark the GPU and possibly the display busy
+ * @dev: drm device
+ * @obj: object we're operating on
+ *
+ * Callers can use this function to indicate that the GPU is busy processing
+ * commands.  If @obj matches one of the CRTC objects (i.e. it's a scanout
+ * buffer), we'll also mark the display as busy, so we know to increase its
+ * clock frequency.
+ */
+void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = NULL;
+	struct intel_framebuffer *intel_fb;
+	struct intel_crtc *intel_crtc;
+
+	if (!drm_core_check_feature(dev, DRIVER_MODESET))
+		return;
+
+	if (!dev_priv->busy)
+		dev_priv->busy = true;
+	else
+		mod_timer(&dev_priv->idle_timer, jiffies +
+			  msecs_to_jiffies(GPU_IDLE_TIMEOUT));
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (!crtc->fb)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		intel_fb = to_intel_framebuffer(crtc->fb);
+		if (intel_fb->obj == obj) {
+			if (!intel_crtc->busy) {
+				/* Non-busy -> busy, upclock */
+				intel_increase_pllclock(crtc);
+				intel_crtc->busy = true;
+			} else {
+				/* Busy -> busy, put off timer */
+				mod_timer(&intel_crtc->idle_timer, jiffies +
+					  msecs_to_jiffies(CRTC_IDLE_TIMEOUT));
+			}
+		}
+	}
+}
+
+static void intel_crtc_destroy(struct drm_crtc *crtc)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct intel_unpin_work *work;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	work = intel_crtc->unpin_work;
+	intel_crtc->unpin_work = NULL;
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+
+	if (work) {
+		cancel_work_sync(&work->work);
+		kfree(work);
+	}
+
+	drm_crtc_cleanup(crtc);
+
+	kfree(intel_crtc);
+}
+
+static void intel_unpin_work_fn(struct work_struct *__work)
+{
+	struct intel_unpin_work *work =
+		container_of(__work, struct intel_unpin_work, work);
+
+	mutex_lock(&work->dev->struct_mutex);
+	intel_unpin_fb_obj(work->old_fb_obj);
+	drm_gem_object_unreference(&work->pending_flip_obj->base);
+	drm_gem_object_unreference(&work->old_fb_obj->base);
+
+	intel_update_fbc(work->dev);
+	mutex_unlock(&work->dev->struct_mutex);
+	kfree(work);
+}
+
+static void do_intel_finish_page_flip(struct drm_device *dev,
+				      struct drm_crtc *crtc)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_unpin_work *work;
+	struct drm_i915_gem_object *obj;
+	struct drm_pending_vblank_event *e;
+	struct timeval tnow, tvbl;
+	unsigned long flags;
+
+	/* Ignore early vblank irqs */
+	if (intel_crtc == NULL)
+		return;
+
+	do_gettimeofday(&tnow);
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	work = intel_crtc->unpin_work;
+	if (work == NULL || !work->pending) {
+		spin_unlock_irqrestore(&dev->event_lock, flags);
+		return;
+	}
+
+	intel_crtc->unpin_work = NULL;
+
+	if (work->event) {
+		e = work->event;
+		e->event.sequence = drm_vblank_count_and_time(dev, intel_crtc->pipe, &tvbl);
+
+		/* Called before vblank count and timestamps have
+		 * been updated for the vblank interval of flip
+		 * completion? Need to increment vblank count and
+		 * add one videorefresh duration to returned timestamp
+		 * to account for this. We assume this happened if we
+		 * get called over 0.9 frame durations after the last
+		 * timestamped vblank.
+		 *
+		 * This calculation can not be used with vrefresh rates
+		 * below 5Hz (10Hz to be on the safe side) without
+		 * promoting to 64 integers.
+		 */
+		if (10 * (timeval_to_ns(&tnow) - timeval_to_ns(&tvbl)) >
+		    9 * crtc->framedur_ns) {
+			e->event.sequence++;
+			tvbl = ns_to_timeval(timeval_to_ns(&tvbl) +
+					     crtc->framedur_ns);
+		}
+
+		e->event.tv_sec = tvbl.tv_sec;
+		e->event.tv_usec = tvbl.tv_usec;
+
+		list_add_tail(&e->base.link,
+			      &e->base.file_priv->event_list);
+		wake_up_interruptible(&e->base.file_priv->event_wait);
+	}
+
+	drm_vblank_put(dev, intel_crtc->pipe);
+
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+
+	obj = work->old_fb_obj;
+
+	atomic_clear_mask(1 << intel_crtc->plane,
+			  &obj->pending_flip.counter);
+	if (atomic_read(&obj->pending_flip) == 0)
+		wake_up(&dev_priv->pending_flip_queue);
+
+	schedule_work(&work->work);
+
+	trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
+}
+
+void intel_finish_page_flip(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+
+	do_intel_finish_page_flip(dev, crtc);
+}
+
+void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
+
+	do_intel_finish_page_flip(dev, crtc);
+}
+
+void intel_prepare_page_flip(struct drm_device *dev, int plane)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc =
+		to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	if (intel_crtc->unpin_work) {
+		if ((++intel_crtc->unpin_work->pending) > 1)
+			DRM_ERROR("Prepared flip multiple times\n");
+	} else {
+		DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n");
+	}
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+}
+
+static int intel_gen2_queue_flip(struct drm_device *dev,
+				 struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb,
+				 struct drm_i915_gem_object *obj)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	unsigned long offset;
+	u32 flip_mask;
+	int ret;
+
+	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+	if (ret)
+		goto out;
+
+	/* Offset into the new buffer for cases of shared fbs between CRTCs */
+	offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
+
+	ret = BEGIN_LP_RING(6);
+	if (ret)
+		goto out;
+
+	/* Can't queue multiple flips, so wait for the previous
+	 * one to finish before executing the next.
+	 */
+	if (intel_crtc->plane)
+		flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
+	else
+		flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
+	OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
+	OUT_RING(MI_NOOP);
+	OUT_RING(MI_DISPLAY_FLIP |
+		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+	OUT_RING(fb->pitches[0]);
+	OUT_RING(obj->gtt_offset + offset);
+	OUT_RING(0); /* aux display base address, unused */
+	ADVANCE_LP_RING();
+out:
+	return ret;
+}
+
+static int intel_gen3_queue_flip(struct drm_device *dev,
+				 struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb,
+				 struct drm_i915_gem_object *obj)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	unsigned long offset;
+	u32 flip_mask;
+	int ret;
+
+	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+	if (ret)
+		goto out;
+
+	/* Offset into the new buffer for cases of shared fbs between CRTCs */
+	offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
+
+	ret = BEGIN_LP_RING(6);
+	if (ret)
+		goto out;
+
+	if (intel_crtc->plane)
+		flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
+	else
+		flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
+	OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
+	OUT_RING(MI_NOOP);
+	OUT_RING(MI_DISPLAY_FLIP_I915 |
+		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+	OUT_RING(fb->pitches[0]);
+	OUT_RING(obj->gtt_offset + offset);
+	OUT_RING(MI_NOOP);
+
+	ADVANCE_LP_RING();
+out:
+	return ret;
+}
+
+static int intel_gen4_queue_flip(struct drm_device *dev,
+				 struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb,
+				 struct drm_i915_gem_object *obj)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	uint32_t pf, pipesrc;
+	int ret;
+
+	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+	if (ret)
+		goto out;
+
+	ret = BEGIN_LP_RING(4);
+	if (ret)
+		goto out;
+
+	/* i965+ uses the linear or tiled offsets from the
+	 * Display Registers (which do not change across a page-flip)
+	 * so we need only reprogram the base address.
+	 */
+	OUT_RING(MI_DISPLAY_FLIP |
+		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+	OUT_RING(fb->pitches[0]);
+	OUT_RING(obj->gtt_offset | obj->tiling_mode);
+
+	/* XXX Enabling the panel-fitter across page-flip is so far
+	 * untested on non-native modes, so ignore it for now.
+	 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
+	 */
+	pf = 0;
+	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
+	OUT_RING(pf | pipesrc);
+	ADVANCE_LP_RING();
+out:
+	return ret;
+}
+
+static int intel_gen6_queue_flip(struct drm_device *dev,
+				 struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb,
+				 struct drm_i915_gem_object *obj)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	uint32_t pf, pipesrc;
+	int ret;
+
+	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+	if (ret)
+		goto out;
+
+	ret = BEGIN_LP_RING(4);
+	if (ret)
+		goto out;
+
+	OUT_RING(MI_DISPLAY_FLIP |
+		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+	OUT_RING(fb->pitches[0] | obj->tiling_mode);
+	OUT_RING(obj->gtt_offset);
+
+	/* Contrary to the suggestions in the documentation,
+	 * "Enable Panel Fitter" does not seem to be required when page
+	 * flipping with a non-native mode, and worse causes a normal
+	 * modeset to fail.
+	 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
+	 */
+	pf = 0;
+	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
+	OUT_RING(pf | pipesrc);
+	ADVANCE_LP_RING();
+out:
+	return ret;
+}
+
+/*
+ * On gen7 we currently use the blit ring because (in early silicon at least)
+ * the render ring doesn't give us interrpts for page flip completion, which
+ * means clients will hang after the first flip is queued.  Fortunately the
+ * blit ring generates interrupts properly, so use it instead.
+ */
+static int intel_gen7_queue_flip(struct drm_device *dev,
+				 struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb,
+				 struct drm_i915_gem_object *obj)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
+	int ret;
+
+	ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
+	if (ret)
+		goto out;
+
+	ret = intel_ring_begin(ring, 4);
+	if (ret)
+		goto out;
+
+	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
+	intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
+	intel_ring_emit(ring, (obj->gtt_offset));
+	intel_ring_emit(ring, (MI_NOOP));
+	intel_ring_advance(ring);
+out:
+	return ret;
+}
+
+static int intel_default_queue_flip(struct drm_device *dev,
+				    struct drm_crtc *crtc,
+				    struct drm_framebuffer *fb,
+				    struct drm_i915_gem_object *obj)
+{
+	return -ENODEV;
+}
+
+static int intel_crtc_page_flip(struct drm_crtc *crtc,
+				struct drm_framebuffer *fb,
+				struct drm_pending_vblank_event *event)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_unpin_work *work;
+	unsigned long flags;
+	int ret;
+
+	work = kzalloc(sizeof *work, GFP_KERNEL);
+	if (work == NULL)
+		return -ENOMEM;
+
+	work->event = event;
+	work->dev = crtc->dev;
+	intel_fb = to_intel_framebuffer(crtc->fb);
+	work->old_fb_obj = intel_fb->obj;
+	INIT_WORK(&work->work, intel_unpin_work_fn);
+
+	ret = drm_vblank_get(dev, intel_crtc->pipe);
+	if (ret)
+		goto free_work;
+
+	/* We borrow the event spin lock for protecting unpin_work */
+	spin_lock_irqsave(&dev->event_lock, flags);
+	if (intel_crtc->unpin_work) {
+		spin_unlock_irqrestore(&dev->event_lock, flags);
+		kfree(work);
+		drm_vblank_put(dev, intel_crtc->pipe);
+
+		DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
+		return -EBUSY;
+	}
+	intel_crtc->unpin_work = work;
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+
+	intel_fb = to_intel_framebuffer(fb);
+	obj = intel_fb->obj;
+
+	mutex_lock(&dev->struct_mutex);
+
+	/* Reference the objects for the scheduled work. */
+	drm_gem_object_reference(&work->old_fb_obj->base);
+	drm_gem_object_reference(&obj->base);
+
+	crtc->fb = fb;
+
+	work->pending_flip_obj = obj;
+
+	work->enable_stall_check = true;
+
+	/* Block clients from rendering to the new back buffer until
+	 * the flip occurs and the object is no longer visible.
+	 */
+	atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
+
+	ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
+	if (ret)
+		goto cleanup_pending;
+
+	intel_disable_fbc(dev);
+	mutex_unlock(&dev->struct_mutex);
+
+	trace_i915_flip_request(intel_crtc->plane, obj);
+
+	return 0;
+
+cleanup_pending:
+	atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
+	drm_gem_object_unreference(&work->old_fb_obj->base);
+	drm_gem_object_unreference(&obj->base);
+	mutex_unlock(&dev->struct_mutex);
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	intel_crtc->unpin_work = NULL;
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+
+	drm_vblank_put(dev, intel_crtc->pipe);
+free_work:
+	kfree(work);
+
+	return ret;
+}
+
+static void intel_sanitize_modesetting(struct drm_device *dev,
+				       int pipe, int plane)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 reg, val;
+	int i;
+
+	/* Clear any frame start delays used for debugging left by the BIOS */
+	for_each_pipe(i) {
+		reg = PIPECONF(i);
+		I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
+	}
+
+	if (HAS_PCH_SPLIT(dev))
+		return;
+
+	/* Who knows what state these registers were left in by the BIOS or
+	 * grub?
+	 *
+	 * If we leave the registers in a conflicting state (e.g. with the
+	 * display plane reading from the other pipe than the one we intend
+	 * to use) then when we attempt to teardown the active mode, we will
+	 * not disable the pipes and planes in the correct order -- leaving
+	 * a plane reading from a disabled pipe and possibly leading to
+	 * undefined behaviour.
+	 */
+
+	reg = DSPCNTR(plane);
+	val = I915_READ(reg);
+
+	if ((val & DISPLAY_PLANE_ENABLE) == 0)
+		return;
+	if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe)
+		return;
+
+	/* This display plane is active and attached to the other CPU pipe. */
+	pipe = !pipe;
+
+	/* Disable the plane and wait for it to stop reading from the pipe. */
+	intel_disable_plane(dev_priv, plane, pipe);
+	intel_disable_pipe(dev_priv, pipe);
+}
+
+static void intel_crtc_reset(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	/* Reset flags back to the 'unknown' status so that they
+	 * will be correctly set on the initial modeset.
+	 */
+	intel_crtc->dpms_mode = -1;
+
+	/* We need to fix up any BIOS configuration that conflicts with
+	 * our expectations.
+	 */
+	intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
+}
+
+static struct drm_crtc_helper_funcs intel_helper_funcs = {
+	.dpms = intel_crtc_dpms,
+	.mode_fixup = intel_crtc_mode_fixup,
+	.mode_set = intel_crtc_mode_set,
+	.mode_set_base = intel_pipe_set_base,
+	.mode_set_base_atomic = intel_pipe_set_base_atomic,
+	.load_lut = intel_crtc_load_lut,
+	.disable = intel_crtc_disable,
+};
+
+static const struct drm_crtc_funcs intel_crtc_funcs = {
+	.reset = intel_crtc_reset,
+	.cursor_set = intel_crtc_cursor_set,
+	.cursor_move = intel_crtc_cursor_move,
+	.gamma_set = intel_crtc_gamma_set,
+	.set_config = drm_crtc_helper_set_config,
+	.destroy = intel_crtc_destroy,
+	.page_flip = intel_crtc_page_flip,
+};
+
+static void intel_crtc_init(struct drm_device *dev, int pipe)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc;
+	int i;
+
+	intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
+	if (intel_crtc == NULL)
+		return;
+
+	drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
+
+	drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
+	for (i = 0; i < 256; i++) {
+		intel_crtc->lut_r[i] = i;
+		intel_crtc->lut_g[i] = i;
+		intel_crtc->lut_b[i] = i;
+	}
+
+	/* Swap pipes & planes for FBC on pre-965 */
+	intel_crtc->pipe = pipe;
+	intel_crtc->plane = pipe;
+	if (IS_MOBILE(dev) && IS_GEN3(dev)) {
+		DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
+		intel_crtc->plane = !pipe;
+	}
+
+	BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
+	       dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL);
+	dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
+	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
+
+	intel_crtc_reset(&intel_crtc->base);
+	intel_crtc->active = true; /* force the pipe off on setup_init_config */
+	intel_crtc->bpp = 24; /* default for pre-Ironlake */
+
+	if (HAS_PCH_SPLIT(dev)) {
+		if (pipe == 2 && IS_IVYBRIDGE(dev))
+			intel_crtc->no_pll = true;
+		intel_helper_funcs.prepare = ironlake_crtc_prepare;
+		intel_helper_funcs.commit = ironlake_crtc_commit;
+	} else {
+		intel_helper_funcs.prepare = i9xx_crtc_prepare;
+		intel_helper_funcs.commit = i9xx_crtc_commit;
+	}
+
+	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
+
+	intel_crtc->busy = false;
+
+	setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
+		    (unsigned long)intel_crtc);
+}
+
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+				struct drm_file *file)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
+	struct drm_mode_object *drmmode_obj;
+	struct intel_crtc *crtc;
+
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
+			DRM_MODE_OBJECT_CRTC);
+
+	if (!drmmode_obj) {
+		DRM_ERROR("no such CRTC id\n");
+		return -EINVAL;
+	}
+
+	crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
+	pipe_from_crtc_id->pipe = crtc->pipe;
+
+	return 0;
+}
+
+static int intel_encoder_clones(struct drm_device *dev, int type_mask)
+{
+	struct intel_encoder *encoder;
+	int index_mask = 0;
+	int entry = 0;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
+		if (type_mask & encoder->clone_mask)
+			index_mask |= (1 << entry);
+		entry++;
+	}
+
+	return index_mask;
+}
+
+static bool has_edp_a(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (!IS_MOBILE(dev))
+		return false;
+
+	if ((I915_READ(DP_A) & DP_DETECTED) == 0)
+		return false;
+
+	if (IS_GEN5(dev) &&
+	    (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
+		return false;
+
+	return true;
+}
+
+static void intel_setup_outputs(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_encoder *encoder;
+	bool dpd_is_edp = false;
+	bool has_lvds;
+
+	has_lvds = intel_lvds_init(dev);
+	if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
+		/* disable the panel fitter on everything but LVDS */
+		I915_WRITE(PFIT_CONTROL, 0);
+	}
+
+	if (HAS_PCH_SPLIT(dev)) {
+		dpd_is_edp = intel_dpd_is_edp(dev);
+
+		if (has_edp_a(dev))
+			intel_dp_init(dev, DP_A);
+
+		if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
+			intel_dp_init(dev, PCH_DP_D);
+	}
+
+	intel_crt_init(dev);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		int found;
+
+		if (I915_READ(HDMIB) & PORT_DETECTED) {
+			/* PCH SDVOB multiplex with HDMIB */
+			found = intel_sdvo_init(dev, PCH_SDVOB);
+			if (!found)
+				intel_hdmi_init(dev, HDMIB);
+			if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
+				intel_dp_init(dev, PCH_DP_B);
+		}
+
+		if (I915_READ(HDMIC) & PORT_DETECTED)
+			intel_hdmi_init(dev, HDMIC);
+
+		if (I915_READ(HDMID) & PORT_DETECTED)
+			intel_hdmi_init(dev, HDMID);
+
+		if (I915_READ(PCH_DP_C) & DP_DETECTED)
+			intel_dp_init(dev, PCH_DP_C);
+
+		if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
+			intel_dp_init(dev, PCH_DP_D);
+
+	} else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
+		bool found = false;
+
+		if (I915_READ(SDVOB) & SDVO_DETECTED) {
+			DRM_DEBUG_KMS("probing SDVOB\n");
+			found = intel_sdvo_init(dev, SDVOB);
+			if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
+				DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
+				intel_hdmi_init(dev, SDVOB);
+			}
+
+			if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
+				DRM_DEBUG_KMS("probing DP_B\n");
+				intel_dp_init(dev, DP_B);
+			}
+		}
+
+		/* Before G4X SDVOC doesn't have its own detect register */
+
+		if (I915_READ(SDVOB) & SDVO_DETECTED) {
+			DRM_DEBUG_KMS("probing SDVOC\n");
+			found = intel_sdvo_init(dev, SDVOC);
+		}
+
+		if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
+
+			if (SUPPORTS_INTEGRATED_HDMI(dev)) {
+				DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
+				intel_hdmi_init(dev, SDVOC);
+			}
+			if (SUPPORTS_INTEGRATED_DP(dev)) {
+				DRM_DEBUG_KMS("probing DP_C\n");
+				intel_dp_init(dev, DP_C);
+			}
+		}
+
+		if (SUPPORTS_INTEGRATED_DP(dev) &&
+		    (I915_READ(DP_D) & DP_DETECTED)) {
+			DRM_DEBUG_KMS("probing DP_D\n");
+			intel_dp_init(dev, DP_D);
+		}
+	} else if (IS_GEN2(dev))
+		intel_dvo_init(dev);
+
+	if (SUPPORTS_TV(dev))
+		intel_tv_init(dev);
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
+		encoder->base.possible_crtcs = encoder->crtc_mask;
+		encoder->base.possible_clones =
+			intel_encoder_clones(dev, encoder->clone_mask);
+	}
+
+	/* disable all the possible outputs/crtcs before entering KMS mode */
+	drm_helper_disable_unused_functions(dev);
+
+	if (HAS_PCH_SPLIT(dev))
+		ironlake_init_pch_refclk(dev);
+}
+
+static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
+{
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+
+	drm_framebuffer_cleanup(fb);
+	drm_gem_object_unreference_unlocked(&intel_fb->obj->base);
+
+	kfree(intel_fb);
+}
+
+static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
+						struct drm_file *file,
+						unsigned int *handle)
+{
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj = intel_fb->obj;
+
+	return drm_gem_handle_create(file, &obj->base, handle);
+}
+
+static const struct drm_framebuffer_funcs intel_fb_funcs = {
+	.destroy = intel_user_framebuffer_destroy,
+	.create_handle = intel_user_framebuffer_create_handle,
+};
+
+int intel_framebuffer_init(struct drm_device *dev,
+			   struct intel_framebuffer *intel_fb,
+			   struct drm_mode_fb_cmd2 *mode_cmd,
+			   struct drm_i915_gem_object *obj)
+{
+	int ret;
+
+	if (obj->tiling_mode == I915_TILING_Y)
+		return -EINVAL;
+
+	if (mode_cmd->pitches[0] & 63)
+		return -EINVAL;
+
+	switch (mode_cmd->pixel_format) {
+	case DRM_FORMAT_RGB332:
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XRGB2101010:
+	case DRM_FORMAT_ARGB2101010:
+		/* RGB formats are common across chipsets */
+		break;
+	case DRM_FORMAT_YUYV:
+	case DRM_FORMAT_UYVY:
+	case DRM_FORMAT_YVYU:
+	case DRM_FORMAT_VYUY:
+		break;
+	default:
+		DRM_DEBUG_KMS("unsupported pixel format %u\n",
+				mode_cmd->pixel_format);
+		return -EINVAL;
+	}
+
+	ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
+	if (ret) {
+		DRM_ERROR("framebuffer init failed %d\n", ret);
+		return ret;
+	}
+
+	drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
+	intel_fb->obj = obj;
+	return 0;
+}
+
+static struct drm_framebuffer *
+intel_user_framebuffer_create(struct drm_device *dev,
+			      struct drm_file *filp,
+			      struct drm_mode_fb_cmd2 *mode_cmd)
+{
+	struct drm_i915_gem_object *obj;
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
+						mode_cmd->handles[0]));
+	if (&obj->base == NULL)
+		return ERR_PTR(-ENOENT);
+
+	return intel_framebuffer_create(dev, mode_cmd, obj);
+}
+
+static const struct drm_mode_config_funcs intel_mode_funcs = {
+	.fb_create = intel_user_framebuffer_create,
+	.output_poll_changed = intel_fb_output_poll_changed,
+};
+
+static struct drm_i915_gem_object *
+intel_alloc_context_page(struct drm_device *dev)
+{
+	struct drm_i915_gem_object *ctx;
+	int ret;
+
+	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
+	ctx = i915_gem_alloc_object(dev, 4096);
+	if (!ctx) {
+		DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
+		return NULL;
+	}
+
+	ret = i915_gem_object_pin(ctx, 4096, true);
+	if (ret) {
+		DRM_ERROR("failed to pin power context: %d\n", ret);
+		goto err_unref;
+	}
+
+	ret = i915_gem_object_set_to_gtt_domain(ctx, 1);
+	if (ret) {
+		DRM_ERROR("failed to set-domain on power context: %d\n", ret);
+		goto err_unpin;
+	}
+
+	return ctx;
+
+err_unpin:
+	i915_gem_object_unpin(ctx);
+err_unref:
+	drm_gem_object_unreference(&ctx->base);
+	mutex_unlock(&dev->struct_mutex);
+	return NULL;
+}
+
+bool ironlake_set_drps(struct drm_device *dev, u8 val)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u16 rgvswctl;
+
+	rgvswctl = I915_READ16(MEMSWCTL);
+	if (rgvswctl & MEMCTL_CMD_STS) {
+		DRM_DEBUG("gpu busy, RCS change rejected\n");
+		return false; /* still busy with another command */
+	}
+
+	rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
+		(val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
+	I915_WRITE16(MEMSWCTL, rgvswctl);
+	POSTING_READ16(MEMSWCTL);
+
+	rgvswctl |= MEMCTL_CMD_STS;
+	I915_WRITE16(MEMSWCTL, rgvswctl);
+
+	return true;
+}
+
+void ironlake_enable_drps(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 rgvmodectl = I915_READ(MEMMODECTL);
+	u8 fmax, fmin, fstart, vstart;
+
+	/* Enable temp reporting */
+	I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN);
+	I915_WRITE16(TSC1, I915_READ(TSC1) | TSE);
+
+	/* 100ms RC evaluation intervals */
+	I915_WRITE(RCUPEI, 100000);
+	I915_WRITE(RCDNEI, 100000);
+
+	/* Set max/min thresholds to 90ms and 80ms respectively */
+	I915_WRITE(RCBMAXAVG, 90000);
+	I915_WRITE(RCBMINAVG, 80000);
+
+	I915_WRITE(MEMIHYST, 1);
+
+	/* Set up min, max, and cur for interrupt handling */
+	fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
+	fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
+	fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
+		MEMMODE_FSTART_SHIFT;
+
+	vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
+		PXVFREQ_PX_SHIFT;
+
+	dev_priv->fmax = fmax; /* IPS callback will increase this */
+	dev_priv->fstart = fstart;
+
+	dev_priv->max_delay = fstart;
+	dev_priv->min_delay = fmin;
+	dev_priv->cur_delay = fstart;
+
+	DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
+			 fmax, fmin, fstart);
+
+	I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
+
+	/*
+	 * Interrupts will be enabled in ironlake_irq_postinstall
+	 */
+
+	I915_WRITE(VIDSTART, vstart);
+	POSTING_READ(VIDSTART);
+
+	rgvmodectl |= MEMMODE_SWMODE_EN;
+	I915_WRITE(MEMMODECTL, rgvmodectl);
+
+	if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10))
+		DRM_ERROR("stuck trying to change perf mode\n");
+	msleep(1);
+
+	ironlake_set_drps(dev, fstart);
+
+	dev_priv->last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) +
+		I915_READ(0x112e0);
+	dev_priv->last_time1 = jiffies_to_msecs(jiffies);
+	dev_priv->last_count2 = I915_READ(0x112f4);
+	getrawmonotonic(&dev_priv->last_time2);
+}
+
+void ironlake_disable_drps(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u16 rgvswctl = I915_READ16(MEMSWCTL);
+
+	/* Ack interrupts, disable EFC interrupt */
+	I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
+	I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG);
+	I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT);
+	I915_WRITE(DEIIR, DE_PCU_EVENT);
+	I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
+
+	/* Go back to the starting frequency */
+	ironlake_set_drps(dev, dev_priv->fstart);
+	msleep(1);
+	rgvswctl |= MEMCTL_CMD_STS;
+	I915_WRITE(MEMSWCTL, rgvswctl);
+	msleep(1);
+
+}
+
+void gen6_set_rps(struct drm_device *dev, u8 val)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 swreq;
+
+	swreq = (val & 0x3ff) << 25;
+	I915_WRITE(GEN6_RPNSWREQ, swreq);
+}
+
+void gen6_disable_rps(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
+	I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
+	I915_WRITE(GEN6_PMIER, 0);
+	/* Complete PM interrupt masking here doesn't race with the rps work
+	 * item again unmasking PM interrupts because that is using a different
+	 * register (PMIMR) to mask PM interrupts. The only risk is in leaving
+	 * stale bits in PMIIR and PMIMR which gen6_enable_rps will clean up. */
+
+	spin_lock_irq(&dev_priv->rps_lock);
+	dev_priv->pm_iir = 0;
+	spin_unlock_irq(&dev_priv->rps_lock);
+
+	I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR));
+}
+
+static unsigned long intel_pxfreq(u32 vidfreq)
+{
+	unsigned long freq;
+	int div = (vidfreq & 0x3f0000) >> 16;
+	int post = (vidfreq & 0x3000) >> 12;
+	int pre = (vidfreq & 0x7);
+
+	if (!pre)
+		return 0;
+
+	freq = ((div * 133333) / ((1<<post) * pre));
+
+	return freq;
+}
+
+void intel_init_emon(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 lcfuse;
+	u8 pxw[16];
+	int i;
+
+	/* Disable to program */
+	I915_WRITE(ECR, 0);
+	POSTING_READ(ECR);
+
+	/* Program energy weights for various events */
+	I915_WRITE(SDEW, 0x15040d00);
+	I915_WRITE(CSIEW0, 0x007f0000);
+	I915_WRITE(CSIEW1, 0x1e220004);
+	I915_WRITE(CSIEW2, 0x04000004);
+
+	for (i = 0; i < 5; i++)
+		I915_WRITE(PEW + (i * 4), 0);
+	for (i = 0; i < 3; i++)
+		I915_WRITE(DEW + (i * 4), 0);
+
+	/* Program P-state weights to account for frequency power adjustment */
+	for (i = 0; i < 16; i++) {
+		u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4));
+		unsigned long freq = intel_pxfreq(pxvidfreq);
+		unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
+			PXVFREQ_PX_SHIFT;
+		unsigned long val;
+
+		val = vid * vid;
+		val *= (freq / 1000);
+		val *= 255;
+		val /= (127*127*900);
+		if (val > 0xff)
+			DRM_ERROR("bad pxval: %ld\n", val);
+		pxw[i] = val;
+	}
+	/* Render standby states get 0 weight */
+	pxw[14] = 0;
+	pxw[15] = 0;
+
+	for (i = 0; i < 4; i++) {
+		u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
+			(pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
+		I915_WRITE(PXW + (i * 4), val);
+	}
+
+	/* Adjust magic regs to magic values (more experimental results) */
+	I915_WRITE(OGW0, 0);
+	I915_WRITE(OGW1, 0);
+	I915_WRITE(EG0, 0x00007f00);
+	I915_WRITE(EG1, 0x0000000e);
+	I915_WRITE(EG2, 0x000e0000);
+	I915_WRITE(EG3, 0x68000300);
+	I915_WRITE(EG4, 0x42000000);
+	I915_WRITE(EG5, 0x00140031);
+	I915_WRITE(EG6, 0);
+	I915_WRITE(EG7, 0);
+
+	for (i = 0; i < 8; i++)
+		I915_WRITE(PXWL + (i * 4), 0);
+
+	/* Enable PMON + select events */
+	I915_WRITE(ECR, 0x80000019);
+
+	lcfuse = I915_READ(LCFUSE02);
+
+	dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
+}
+
+static int intel_enable_rc6(struct drm_device *dev)
+{
+	/*
+	 * Respect the kernel parameter if it is set
+	 */
+	if (i915_enable_rc6 >= 0)
+		return i915_enable_rc6;
+
+	/*
+	 * Disable RC6 on Ironlake
+	 */
+	if (INTEL_INFO(dev)->gen == 5)
+		return 0;
+
+	/*
+	 * Disable rc6 on Sandybridge
+	 */
+	if (INTEL_INFO(dev)->gen == 6) {
+		DRM_DEBUG_DRIVER("Sandybridge: deep RC6 disabled\n");
+		return INTEL_RC6_ENABLE;
+	}
+	DRM_DEBUG_DRIVER("RC6 and deep RC6 enabled\n");
+	return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE);
+}
+
+void gen6_enable_rps(struct drm_i915_private *dev_priv)
+{
+	u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+	u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
+	u32 pcu_mbox, rc6_mask = 0;
+	u32 gtfifodbg;
+	int cur_freq, min_freq, max_freq;
+	int rc6_mode;
+	int i;
+
+	/* Here begins a magic sequence of register writes to enable
+	 * auto-downclocking.
+	 *
+	 * Perhaps there might be some value in exposing these to
+	 * userspace...
+	 */
+	I915_WRITE(GEN6_RC_STATE, 0);
+	mutex_lock(&dev_priv->dev->struct_mutex);
+
+	/* Clear the DBG now so we don't confuse earlier errors */
+	if ((gtfifodbg = I915_READ(GTFIFODBG))) {
+		DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg);
+		I915_WRITE(GTFIFODBG, gtfifodbg);
+	}
+
+	gen6_gt_force_wake_get(dev_priv);
+
+	/* disable the counters and set deterministic thresholds */
+	I915_WRITE(GEN6_RC_CONTROL, 0);
+
+	I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
+	I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
+	I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
+	I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
+	I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
+
+	for (i = 0; i < I915_NUM_RINGS; i++)
+		I915_WRITE(RING_MAX_IDLE(dev_priv->ring[i].mmio_base), 10);
+
+	I915_WRITE(GEN6_RC_SLEEP, 0);
+	I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
+	I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
+	I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
+	I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
+
+	rc6_mode = intel_enable_rc6(dev_priv->dev);
+	if (rc6_mode & INTEL_RC6_ENABLE)
+		rc6_mask |= GEN6_RC_CTL_RC6_ENABLE;
+
+	if (rc6_mode & INTEL_RC6p_ENABLE)
+		rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE;
+
+	if (rc6_mode & INTEL_RC6pp_ENABLE)
+		rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE;
+
+	DRM_INFO("Enabling RC6 states: RC6 %s, RC6p %s, RC6pp %s\n",
+			(rc6_mode & INTEL_RC6_ENABLE) ? "on" : "off",
+			(rc6_mode & INTEL_RC6p_ENABLE) ? "on" : "off",
+			(rc6_mode & INTEL_RC6pp_ENABLE) ? "on" : "off");
+
+	I915_WRITE(GEN6_RC_CONTROL,
+		   rc6_mask |
+		   GEN6_RC_CTL_EI_MODE(1) |
+		   GEN6_RC_CTL_HW_ENABLE);
+
+	I915_WRITE(GEN6_RPNSWREQ,
+		   GEN6_FREQUENCY(10) |
+		   GEN6_OFFSET(0) |
+		   GEN6_AGGRESSIVE_TURBO);
+	I915_WRITE(GEN6_RC_VIDEO_FREQ,
+		   GEN6_FREQUENCY(12));
+
+	I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
+	I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
+		   18 << 24 |
+		   6 << 16);
+	I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000);
+	I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000);
+	I915_WRITE(GEN6_RP_UP_EI, 100000);
+	I915_WRITE(GEN6_RP_DOWN_EI, 5000000);
+	I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
+	I915_WRITE(GEN6_RP_CONTROL,
+		   GEN6_RP_MEDIA_TURBO |
+		   GEN6_RP_MEDIA_HW_NORMAL_MODE |
+		   GEN6_RP_MEDIA_IS_GFX |
+		   GEN6_RP_ENABLE |
+		   GEN6_RP_UP_BUSY_AVG |
+		   GEN6_RP_DOWN_IDLE_CONT);
+
+	if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
+		     500))
+		DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
+
+	I915_WRITE(GEN6_PCODE_DATA, 0);
+	I915_WRITE(GEN6_PCODE_MAILBOX,
+		   GEN6_PCODE_READY |
+		   GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
+	if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
+		     500))
+		DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
+
+	min_freq = (rp_state_cap & 0xff0000) >> 16;
+	max_freq = rp_state_cap & 0xff;
+	cur_freq = (gt_perf_status & 0xff00) >> 8;
+
+	/* Check for overclock support */
+	if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
+		     500))
+		DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
+	I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_READ_OC_PARAMS);
+	pcu_mbox = I915_READ(GEN6_PCODE_DATA);
+	if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
+		     500))
+		DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
+	if (pcu_mbox & (1<<31)) { /* OC supported */
+		max_freq = pcu_mbox & 0xff;
+		DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 50);
+	}
+
+	/* In units of 100MHz */
+	dev_priv->max_delay = max_freq;
+	dev_priv->min_delay = min_freq;
+	dev_priv->cur_delay = cur_freq;
+
+	/* requires MSI enabled */
+	I915_WRITE(GEN6_PMIER,
+		   GEN6_PM_MBOX_EVENT |
+		   GEN6_PM_THERMAL_EVENT |
+		   GEN6_PM_RP_DOWN_TIMEOUT |
+		   GEN6_PM_RP_UP_THRESHOLD |
+		   GEN6_PM_RP_DOWN_THRESHOLD |
+		   GEN6_PM_RP_UP_EI_EXPIRED |
+		   GEN6_PM_RP_DOWN_EI_EXPIRED);
+	spin_lock_irq(&dev_priv->rps_lock);
+	WARN_ON(dev_priv->pm_iir != 0);
+	I915_WRITE(GEN6_PMIMR, 0);
+	spin_unlock_irq(&dev_priv->rps_lock);
+	/* enable all PM interrupts */
+	I915_WRITE(GEN6_PMINTRMSK, 0);
+
+	gen6_gt_force_wake_put(dev_priv);
+	mutex_unlock(&dev_priv->dev->struct_mutex);
+}
+
+void gen6_update_ring_freq(struct drm_i915_private *dev_priv)
+{
+	int min_freq = 15;
+	int gpu_freq, ia_freq, max_ia_freq;
+	int scaling_factor = 180;
+
+	max_ia_freq = cpufreq_quick_get_max(0);
+	/*
+	 * Default to measured freq if none found, PCU will ensure we don't go
+	 * over
+	 */
+	if (!max_ia_freq)
+		max_ia_freq = tsc_khz;
+
+	/* Convert from kHz to MHz */
+	max_ia_freq /= 1000;
+
+	mutex_lock(&dev_priv->dev->struct_mutex);
+
+	/*
+	 * For each potential GPU frequency, load a ring frequency we'd like
+	 * to use for memory access.  We do this by specifying the IA frequency
+	 * the PCU should use as a reference to determine the ring frequency.
+	 */
+	for (gpu_freq = dev_priv->max_delay; gpu_freq >= dev_priv->min_delay;
+	     gpu_freq--) {
+		int diff = dev_priv->max_delay - gpu_freq;
+
+		/*
+		 * For GPU frequencies less than 750MHz, just use the lowest
+		 * ring freq.
+		 */
+		if (gpu_freq < min_freq)
+			ia_freq = 800;
+		else
+			ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
+		ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
+
+		I915_WRITE(GEN6_PCODE_DATA,
+			   (ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT) |
+			   gpu_freq);
+		I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY |
+			   GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
+		if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) &
+			      GEN6_PCODE_READY) == 0, 10)) {
+			DRM_ERROR("pcode write of freq table timed out\n");
+			continue;
+		}
+	}
+
+	mutex_unlock(&dev_priv->dev->struct_mutex);
+}
+
+static void ironlake_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
+
+	/* Required for FBC */
+	dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE |
+		DPFCRUNIT_CLOCK_GATE_DISABLE |
+		DPFDUNIT_CLOCK_GATE_DISABLE;
+	/* Required for CxSR */
+	dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE;
+
+	I915_WRITE(PCH_3DCGDIS0,
+		   MARIUNIT_CLOCK_GATE_DISABLE |
+		   SVSMUNIT_CLOCK_GATE_DISABLE);
+	I915_WRITE(PCH_3DCGDIS1,
+		   VFMUNIT_CLOCK_GATE_DISABLE);
+
+	I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
+
+	/*
+	 * According to the spec the following bits should be set in
+	 * order to enable memory self-refresh
+	 * The bit 22/21 of 0x42004
+	 * The bit 5 of 0x42020
+	 * The bit 15 of 0x45000
+	 */
+	I915_WRITE(ILK_DISPLAY_CHICKEN2,
+		   (I915_READ(ILK_DISPLAY_CHICKEN2) |
+		    ILK_DPARB_GATE | ILK_VSDPFD_FULL));
+	I915_WRITE(ILK_DSPCLK_GATE,
+		   (I915_READ(ILK_DSPCLK_GATE) |
+		    ILK_DPARB_CLK_GATE));
+	I915_WRITE(DISP_ARB_CTL,
+		   (I915_READ(DISP_ARB_CTL) |
+		    DISP_FBC_WM_DIS));
+	I915_WRITE(WM3_LP_ILK, 0);
+	I915_WRITE(WM2_LP_ILK, 0);
+	I915_WRITE(WM1_LP_ILK, 0);
+
+	/*
+	 * Based on the document from hardware guys the following bits
+	 * should be set unconditionally in order to enable FBC.
+	 * The bit 22 of 0x42000
+	 * The bit 22 of 0x42004
+	 * The bit 7,8,9 of 0x42020.
+	 */
+	if (IS_IRONLAKE_M(dev)) {
+		I915_WRITE(ILK_DISPLAY_CHICKEN1,
+			   I915_READ(ILK_DISPLAY_CHICKEN1) |
+			   ILK_FBCQ_DIS);
+		I915_WRITE(ILK_DISPLAY_CHICKEN2,
+			   I915_READ(ILK_DISPLAY_CHICKEN2) |
+			   ILK_DPARB_GATE);
+		I915_WRITE(ILK_DSPCLK_GATE,
+			   I915_READ(ILK_DSPCLK_GATE) |
+			   ILK_DPFC_DIS1 |
+			   ILK_DPFC_DIS2 |
+			   ILK_CLK_FBC);
+	}
+
+	I915_WRITE(ILK_DISPLAY_CHICKEN2,
+		   I915_READ(ILK_DISPLAY_CHICKEN2) |
+		   ILK_ELPIN_409_SELECT);
+	I915_WRITE(_3D_CHICKEN2,
+		   _3D_CHICKEN2_WM_READ_PIPELINED << 16 |
+		   _3D_CHICKEN2_WM_READ_PIPELINED);
+}
+
+static void gen6_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pipe;
+	uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
+
+	I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
+
+	I915_WRITE(ILK_DISPLAY_CHICKEN2,
+		   I915_READ(ILK_DISPLAY_CHICKEN2) |
+		   ILK_ELPIN_409_SELECT);
+
+	I915_WRITE(WM3_LP_ILK, 0);
+	I915_WRITE(WM2_LP_ILK, 0);
+	I915_WRITE(WM1_LP_ILK, 0);
+
+	I915_WRITE(GEN6_UCGCTL1,
+		   I915_READ(GEN6_UCGCTL1) |
+		   GEN6_BLBUNIT_CLOCK_GATE_DISABLE);
+
+	/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
+	 * gating disable must be set.  Failure to set it results in
+	 * flickering pixels due to Z write ordering failures after
+	 * some amount of runtime in the Mesa "fire" demo, and Unigine
+	 * Sanctuary and Tropics, and apparently anything else with
+	 * alpha test or pixel discard.
+	 *
+	 * According to the spec, bit 11 (RCCUNIT) must also be set,
+	 * but we didn't debug actual testcases to find it out.
+	 */
+	I915_WRITE(GEN6_UCGCTL2,
+		   GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
+		   GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
+
+	/*
+	 * According to the spec the following bits should be
+	 * set in order to enable memory self-refresh and fbc:
+	 * The bit21 and bit22 of 0x42000
+	 * The bit21 and bit22 of 0x42004
+	 * The bit5 and bit7 of 0x42020
+	 * The bit14 of 0x70180
+	 * The bit14 of 0x71180
+	 */
+	I915_WRITE(ILK_DISPLAY_CHICKEN1,
+		   I915_READ(ILK_DISPLAY_CHICKEN1) |
+		   ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS);
+	I915_WRITE(ILK_DISPLAY_CHICKEN2,
+		   I915_READ(ILK_DISPLAY_CHICKEN2) |
+		   ILK_DPARB_GATE | ILK_VSDPFD_FULL);
+	I915_WRITE(ILK_DSPCLK_GATE,
+		   I915_READ(ILK_DSPCLK_GATE) |
+		   ILK_DPARB_CLK_GATE  |
+		   ILK_DPFD_CLK_GATE);
+
+	for_each_pipe(pipe) {
+		I915_WRITE(DSPCNTR(pipe),
+			   I915_READ(DSPCNTR(pipe)) |
+			   DISPPLANE_TRICKLE_FEED_DISABLE);
+		intel_flush_display_plane(dev_priv, pipe);
+	}
+}
+
+static void gen7_setup_fixed_func_scheduler(struct drm_i915_private *dev_priv)
+{
+	uint32_t reg = I915_READ(GEN7_FF_THREAD_MODE);
+
+	reg &= ~GEN7_FF_SCHED_MASK;
+	reg |= GEN7_FF_TS_SCHED_HW;
+	reg |= GEN7_FF_VS_SCHED_HW;
+	reg |= GEN7_FF_DS_SCHED_HW;
+
+	I915_WRITE(GEN7_FF_THREAD_MODE, reg);
+}
+
+static void ivybridge_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pipe;
+	uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
+
+	I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
+
+	I915_WRITE(WM3_LP_ILK, 0);
+	I915_WRITE(WM2_LP_ILK, 0);
+	I915_WRITE(WM1_LP_ILK, 0);
+
+	/* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+	 * This implements the WaDisableRCZUnitClockGating workaround.
+	 */
+	I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
+
+	I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
+
+	I915_WRITE(IVB_CHICKEN3,
+		   CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
+		   CHICKEN3_DGMG_DONE_FIX_DISABLE);
+
+	/* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */
+	I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
+		   GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
+
+	/* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */
+	I915_WRITE(GEN7_L3CNTLREG1,
+			GEN7_WA_FOR_GEN7_L3_CONTROL);
+	I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
+			GEN7_WA_L3_CHICKEN_MODE);
+
+	/* This is required by WaCatErrorRejectionIssue */
+	I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+			I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+			GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
+
+	for_each_pipe(pipe) {
+		I915_WRITE(DSPCNTR(pipe),
+			   I915_READ(DSPCNTR(pipe)) |
+			   DISPPLANE_TRICKLE_FEED_DISABLE);
+		intel_flush_display_plane(dev_priv, pipe);
+	}
+
+	gen7_setup_fixed_func_scheduler(dev_priv);
+}
+
+static void g4x_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dspclk_gate;
+
+	I915_WRITE(RENCLK_GATE_D1, 0);
+	I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
+		   GS_UNIT_CLOCK_GATE_DISABLE |
+		   CL_UNIT_CLOCK_GATE_DISABLE);
+	I915_WRITE(RAMCLK_GATE_D, 0);
+	dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
+		OVRUNIT_CLOCK_GATE_DISABLE |
+		OVCUNIT_CLOCK_GATE_DISABLE;
+	if (IS_GM45(dev))
+		dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
+	I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
+}
+
+static void crestline_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
+	I915_WRITE(RENCLK_GATE_D2, 0);
+	I915_WRITE(DSPCLK_GATE_D, 0);
+	I915_WRITE(RAMCLK_GATE_D, 0);
+	I915_WRITE16(DEUC, 0);
+}
+
+static void broadwater_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
+		   I965_RCC_CLOCK_GATE_DISABLE |
+		   I965_RCPB_CLOCK_GATE_DISABLE |
+		   I965_ISC_CLOCK_GATE_DISABLE |
+		   I965_FBC_CLOCK_GATE_DISABLE);
+	I915_WRITE(RENCLK_GATE_D2, 0);
+}
+
+static void gen3_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dstate = I915_READ(D_STATE);
+
+	dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
+		DSTATE_DOT_CLOCK_GATING;
+	I915_WRITE(D_STATE, dstate);
+}
+
+static void i85x_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
+}
+
+static void i830_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
+}
+
+static void ibx_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/*
+	 * On Ibex Peak and Cougar Point, we need to disable clock
+	 * gating for the panel power sequencer or it will fail to
+	 * start up when no ports are active.
+	 */
+	I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
+}
+
+static void cpt_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pipe;
+
+	/*
+	 * On Ibex Peak and Cougar Point, we need to disable clock
+	 * gating for the panel power sequencer or it will fail to
+	 * start up when no ports are active.
+	 */
+	I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
+	I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
+		   DPLS_EDP_PPS_FIX_DIS);
+	/* Without this, mode sets may fail silently on FDI */
+	for_each_pipe(pipe)
+		I915_WRITE(TRANS_CHICKEN2(pipe), TRANS_AUTOTRAIN_GEN_STALL_DIS);
+}
+
+static void ironlake_teardown_rc6(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->renderctx) {
+		i915_gem_object_unpin(dev_priv->renderctx);
+		drm_gem_object_unreference(&dev_priv->renderctx->base);
+		dev_priv->renderctx = NULL;
+	}
+
+	if (dev_priv->pwrctx) {
+		i915_gem_object_unpin(dev_priv->pwrctx);
+		drm_gem_object_unreference(&dev_priv->pwrctx->base);
+		dev_priv->pwrctx = NULL;
+	}
+}
+
+static void ironlake_disable_rc6(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (I915_READ(PWRCTXA)) {
+		/* Wake the GPU, prevent RC6, then restore RSTDBYCTL */
+		I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT);
+		wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) == RSX_STATUS_ON),
+			 50);
+
+		I915_WRITE(PWRCTXA, 0);
+		POSTING_READ(PWRCTXA);
+
+		I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
+		POSTING_READ(RSTDBYCTL);
+	}
+
+	ironlake_teardown_rc6(dev);
+}
+
+static int ironlake_setup_rc6(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->renderctx == NULL)
+		dev_priv->renderctx = intel_alloc_context_page(dev);
+	if (!dev_priv->renderctx)
+		return -ENOMEM;
+
+	if (dev_priv->pwrctx == NULL)
+		dev_priv->pwrctx = intel_alloc_context_page(dev);
+	if (!dev_priv->pwrctx) {
+		ironlake_teardown_rc6(dev);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+void ironlake_enable_rc6(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	/* rc6 disabled by default due to repeated reports of hanging during
+	 * boot and resume.
+	 */
+	if (!intel_enable_rc6(dev))
+		return;
+
+	mutex_lock(&dev->struct_mutex);
+	ret = ironlake_setup_rc6(dev);
+	if (ret) {
+		mutex_unlock(&dev->struct_mutex);
+		return;
+	}
+
+	/*
+	 * GPU can automatically power down the render unit if given a page
+	 * to save state.
+	 */
+	ret = BEGIN_LP_RING(6);
+	if (ret) {
+		ironlake_teardown_rc6(dev);
+		mutex_unlock(&dev->struct_mutex);
+		return;
+	}
+
+	OUT_RING(MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
+	OUT_RING(MI_SET_CONTEXT);
+	OUT_RING(dev_priv->renderctx->gtt_offset |
+		 MI_MM_SPACE_GTT |
+		 MI_SAVE_EXT_STATE_EN |
+		 MI_RESTORE_EXT_STATE_EN |
+		 MI_RESTORE_INHIBIT);
+	OUT_RING(MI_SUSPEND_FLUSH);
+	OUT_RING(MI_NOOP);
+	OUT_RING(MI_FLUSH);
+	ADVANCE_LP_RING();
+
+	/*
+	 * Wait for the command parser to advance past MI_SET_CONTEXT. The HW
+	 * does an implicit flush, combined with MI_FLUSH above, it should be
+	 * safe to assume that renderctx is valid
+	 */
+	ret = intel_wait_ring_idle(LP_RING(dev_priv));
+	if (ret) {
+		DRM_ERROR("failed to enable ironlake power power savings\n");
+		ironlake_teardown_rc6(dev);
+		mutex_unlock(&dev->struct_mutex);
+		return;
+	}
+
+	I915_WRITE(PWRCTXA, dev_priv->pwrctx->gtt_offset | PWRCTX_EN);
+	I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
+	mutex_unlock(&dev->struct_mutex);
+}
+
+void intel_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->display.init_clock_gating(dev);
+
+	if (dev_priv->display.init_pch_clock_gating)
+		dev_priv->display.init_pch_clock_gating(dev);
+}
+
+/* Set up chip specific display functions */
+static void intel_init_display(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* We always want a DPMS function */
+	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->display.dpms = ironlake_crtc_dpms;
+		dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
+		dev_priv->display.update_plane = ironlake_update_plane;
+	} else {
+		dev_priv->display.dpms = i9xx_crtc_dpms;
+		dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
+		dev_priv->display.update_plane = i9xx_update_plane;
+	}
+
+	if (I915_HAS_FBC(dev)) {
+		if (HAS_PCH_SPLIT(dev)) {
+			dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
+			dev_priv->display.enable_fbc = ironlake_enable_fbc;
+			dev_priv->display.disable_fbc = ironlake_disable_fbc;
+		} else if (IS_GM45(dev)) {
+			dev_priv->display.fbc_enabled = g4x_fbc_enabled;
+			dev_priv->display.enable_fbc = g4x_enable_fbc;
+			dev_priv->display.disable_fbc = g4x_disable_fbc;
+		} else if (IS_CRESTLINE(dev)) {
+			dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
+			dev_priv->display.enable_fbc = i8xx_enable_fbc;
+			dev_priv->display.disable_fbc = i8xx_disable_fbc;
+		}
+		/* 855GM needs testing */
+	}
+
+	/* Returns the core display clock speed */
+	if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
+		dev_priv->display.get_display_clock_speed =
+			i945_get_display_clock_speed;
+	else if (IS_I915G(dev))
+		dev_priv->display.get_display_clock_speed =
+			i915_get_display_clock_speed;
+	else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev))
+		dev_priv->display.get_display_clock_speed =
+			i9xx_misc_get_display_clock_speed;
+	else if (IS_I915GM(dev))
+		dev_priv->display.get_display_clock_speed =
+			i915gm_get_display_clock_speed;
+	else if (IS_I865G(dev))
+		dev_priv->display.get_display_clock_speed =
+			i865_get_display_clock_speed;
+	else if (IS_I85X(dev))
+		dev_priv->display.get_display_clock_speed =
+			i855_get_display_clock_speed;
+	else /* 852, 830 */
+		dev_priv->display.get_display_clock_speed =
+			i830_get_display_clock_speed;
+
+	/* For FIFO watermark updates */
+	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->display.force_wake_get = __gen6_gt_force_wake_get;
+		dev_priv->display.force_wake_put = __gen6_gt_force_wake_put;
+
+		/* IVB configs may use multi-threaded forcewake */
+		if (IS_IVYBRIDGE(dev)) {
+			u32	ecobus;
+
+			/* A small trick here - if the bios hasn't configured MT forcewake,
+			 * and if the device is in RC6, then force_wake_mt_get will not wake
+			 * the device and the ECOBUS read will return zero. Which will be
+			 * (correctly) interpreted by the test below as MT forcewake being
+			 * disabled.
+			 */
+			mutex_lock(&dev->struct_mutex);
+			__gen6_gt_force_wake_mt_get(dev_priv);
+			ecobus = I915_READ_NOTRACE(ECOBUS);
+			__gen6_gt_force_wake_mt_put(dev_priv);
+			mutex_unlock(&dev->struct_mutex);
+
+			if (ecobus & FORCEWAKE_MT_ENABLE) {
+				DRM_DEBUG_KMS("Using MT version of forcewake\n");
+				dev_priv->display.force_wake_get =
+					__gen6_gt_force_wake_mt_get;
+				dev_priv->display.force_wake_put =
+					__gen6_gt_force_wake_mt_put;
+			}
+		}
+
+		if (HAS_PCH_IBX(dev))
+			dev_priv->display.init_pch_clock_gating = ibx_init_clock_gating;
+		else if (HAS_PCH_CPT(dev))
+			dev_priv->display.init_pch_clock_gating = cpt_init_clock_gating;
+
+		if (IS_GEN5(dev)) {
+			if (I915_READ(MLTR_ILK) & ILK_SRLT_MASK)
+				dev_priv->display.update_wm = ironlake_update_wm;
+			else {
+				DRM_DEBUG_KMS("Failed to get proper latency. "
+					      "Disable CxSR\n");
+				dev_priv->display.update_wm = NULL;
+			}
+			dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
+			dev_priv->display.init_clock_gating = ironlake_init_clock_gating;
+			dev_priv->display.write_eld = ironlake_write_eld;
+		} else if (IS_GEN6(dev)) {
+			if (SNB_READ_WM0_LATENCY()) {
+				dev_priv->display.update_wm = sandybridge_update_wm;
+				dev_priv->display.update_sprite_wm = sandybridge_update_sprite_wm;
+			} else {
+				DRM_DEBUG_KMS("Failed to read display plane latency. "
+					      "Disable CxSR\n");
+				dev_priv->display.update_wm = NULL;
+			}
+			dev_priv->display.fdi_link_train = gen6_fdi_link_train;
+			dev_priv->display.init_clock_gating = gen6_init_clock_gating;
+			dev_priv->display.write_eld = ironlake_write_eld;
+		} else if (IS_IVYBRIDGE(dev)) {
+			/* FIXME: detect B0+ stepping and use auto training */
+			dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
+			if (SNB_READ_WM0_LATENCY()) {
+				dev_priv->display.update_wm = sandybridge_update_wm;
+				dev_priv->display.update_sprite_wm = sandybridge_update_sprite_wm;
+			} else {
+				DRM_DEBUG_KMS("Failed to read display plane latency. "
+					      "Disable CxSR\n");
+				dev_priv->display.update_wm = NULL;
+			}
+			dev_priv->display.init_clock_gating = ivybridge_init_clock_gating;
+			dev_priv->display.write_eld = ironlake_write_eld;
+		} else
+			dev_priv->display.update_wm = NULL;
+	} else if (IS_PINEVIEW(dev)) {
+		if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev),
+					    dev_priv->is_ddr3,
+					    dev_priv->fsb_freq,
+					    dev_priv->mem_freq)) {
+			DRM_INFO("failed to find known CxSR latency "
+				 "(found ddr%s fsb freq %d, mem freq %d), "
+				 "disabling CxSR\n",
+				 (dev_priv->is_ddr3 == 1) ? "3" : "2",
+				 dev_priv->fsb_freq, dev_priv->mem_freq);
+			/* Disable CxSR and never update its watermark again */
+			pineview_disable_cxsr(dev);
+			dev_priv->display.update_wm = NULL;
+		} else
+			dev_priv->display.update_wm = pineview_update_wm;
+		dev_priv->display.init_clock_gating = gen3_init_clock_gating;
+	} else if (IS_G4X(dev)) {
+		dev_priv->display.write_eld = g4x_write_eld;
+		dev_priv->display.update_wm = g4x_update_wm;
+		dev_priv->display.init_clock_gating = g4x_init_clock_gating;
+	} else if (IS_GEN4(dev)) {
+		dev_priv->display.update_wm = i965_update_wm;
+		if (IS_CRESTLINE(dev))
+			dev_priv->display.init_clock_gating = crestline_init_clock_gating;
+		else if (IS_BROADWATER(dev))
+			dev_priv->display.init_clock_gating = broadwater_init_clock_gating;
+	} else if (IS_GEN3(dev)) {
+		dev_priv->display.update_wm = i9xx_update_wm;
+		dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
+		dev_priv->display.init_clock_gating = gen3_init_clock_gating;
+	} else if (IS_I865G(dev)) {
+		dev_priv->display.update_wm = i830_update_wm;
+		dev_priv->display.init_clock_gating = i85x_init_clock_gating;
+		dev_priv->display.get_fifo_size = i830_get_fifo_size;
+	} else if (IS_I85X(dev)) {
+		dev_priv->display.update_wm = i9xx_update_wm;
+		dev_priv->display.get_fifo_size = i85x_get_fifo_size;
+		dev_priv->display.init_clock_gating = i85x_init_clock_gating;
+	} else {
+		dev_priv->display.update_wm = i830_update_wm;
+		dev_priv->display.init_clock_gating = i830_init_clock_gating;
+		if (IS_845G(dev))
+			dev_priv->display.get_fifo_size = i845_get_fifo_size;
+		else
+			dev_priv->display.get_fifo_size = i830_get_fifo_size;
+	}
+
+	/* Default just returns -ENODEV to indicate unsupported */
+	dev_priv->display.queue_flip = intel_default_queue_flip;
+
+	switch (INTEL_INFO(dev)->gen) {
+	case 2:
+		dev_priv->display.queue_flip = intel_gen2_queue_flip;
+		break;
+
+	case 3:
+		dev_priv->display.queue_flip = intel_gen3_queue_flip;
+		break;
+
+	case 4:
+	case 5:
+		dev_priv->display.queue_flip = intel_gen4_queue_flip;
+		break;
+
+	case 6:
+		dev_priv->display.queue_flip = intel_gen6_queue_flip;
+		break;
+	case 7:
+		dev_priv->display.queue_flip = intel_gen7_queue_flip;
+		break;
+	}
+}
+
+/*
+ * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
+ * resume, or other times.  This quirk makes sure that's the case for
+ * affected systems.
+ */
+static void quirk_pipea_force(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->quirks |= QUIRK_PIPEA_FORCE;
+	DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
+}
+
+/*
+ * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
+ */
+static void quirk_ssc_force_disable(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
+}
+
+struct intel_quirk {
+	int device;
+	int subsystem_vendor;
+	int subsystem_device;
+	void (*hook)(struct drm_device *dev);
+};
+
+struct intel_quirk intel_quirks[] = {
+	/* HP Mini needs pipe A force quirk (LP: #322104) */
+	{ 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
+
+	/* Thinkpad R31 needs pipe A force quirk */
+	{ 0x3577, 0x1014, 0x0505, quirk_pipea_force },
+	/* Toshiba Protege R-205, S-209 needs pipe A force quirk */
+	{ 0x2592, 0x1179, 0x0001, quirk_pipea_force },
+
+	/* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
+	{ 0x3577,  0x1014, 0x0513, quirk_pipea_force },
+	/* ThinkPad X40 needs pipe A force quirk */
+
+	/* ThinkPad T60 needs pipe A force quirk (bug #16494) */
+	{ 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
+
+	/* 855 & before need to leave pipe A & dpll A up */
+	{ 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+	{ 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+
+	/* Lenovo U160 cannot use SSC on LVDS */
+	{ 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
+
+	/* Sony Vaio Y cannot use SSC on LVDS */
+	{ 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
+};
+
+static void intel_init_quirks(struct drm_device *dev)
+{
+	struct pci_dev *d = dev->pdev;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
+		struct intel_quirk *q = &intel_quirks[i];
+
+		if (d->device == q->device &&
+		    (d->subsystem_vendor == q->subsystem_vendor ||
+		     q->subsystem_vendor == PCI_ANY_ID) &&
+		    (d->subsystem_device == q->subsystem_device ||
+		     q->subsystem_device == PCI_ANY_ID))
+			q->hook(dev);
+	}
+}
+
+/* Disable the VGA plane that we never use */
+static void i915_disable_vga(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u8 sr1;
+	u32 vga_reg;
+
+	if (HAS_PCH_SPLIT(dev))
+		vga_reg = CPU_VGACNTRL;
+	else
+		vga_reg = VGACNTRL;
+
+	vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
+	outb(1, VGA_SR_INDEX);
+	sr1 = inb(VGA_SR_DATA);
+	outb(sr1 | 1<<5, VGA_SR_DATA);
+	vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
+	udelay(300);
+
+	I915_WRITE(vga_reg, VGA_DISP_DISABLE);
+	POSTING_READ(vga_reg);
+}
+
+void intel_modeset_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i, ret;
+
+	drm_mode_config_init(dev);
+
+	dev->mode_config.min_width = 0;
+	dev->mode_config.min_height = 0;
+
+	dev->mode_config.preferred_depth = 24;
+	dev->mode_config.prefer_shadow = 1;
+
+	dev->mode_config.funcs = (void *)&intel_mode_funcs;
+
+	intel_init_quirks(dev);
+
+	intel_init_display(dev);
+
+	if (IS_GEN2(dev)) {
+		dev->mode_config.max_width = 2048;
+		dev->mode_config.max_height = 2048;
+	} else if (IS_GEN3(dev)) {
+		dev->mode_config.max_width = 4096;
+		dev->mode_config.max_height = 4096;
+	} else {
+		dev->mode_config.max_width = 8192;
+		dev->mode_config.max_height = 8192;
+	}
+	dev->mode_config.fb_base = dev->agp->base;
+
+	DRM_DEBUG_KMS("%d display pipe%s available.\n",
+		      dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
+
+	for (i = 0; i < dev_priv->num_pipe; i++) {
+		intel_crtc_init(dev, i);
+		ret = intel_plane_init(dev, i);
+		if (ret)
+			DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret);
+	}
+
+	/* Just disable it once at startup */
+	i915_disable_vga(dev);
+	intel_setup_outputs(dev);
+
+	intel_init_clock_gating(dev);
+
+	if (IS_IRONLAKE_M(dev)) {
+		ironlake_enable_drps(dev);
+		intel_init_emon(dev);
+	}
+
+	if (IS_GEN6(dev) || IS_GEN7(dev)) {
+		gen6_enable_rps(dev_priv);
+		gen6_update_ring_freq(dev_priv);
+	}
+
+	INIT_WORK(&dev_priv->idle_work, intel_idle_update);
+	setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
+		    (unsigned long)dev);
+}
+
+void intel_modeset_gem_init(struct drm_device *dev)
+{
+	if (IS_IRONLAKE_M(dev))
+		ironlake_enable_rc6(dev);
+
+	intel_setup_overlay(dev);
+}
+
+void intel_modeset_cleanup(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	struct intel_crtc *intel_crtc;
+
+	drm_kms_helper_poll_fini(dev);
+	mutex_lock(&dev->struct_mutex);
+
+	intel_unregister_dsm_handler();
+
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		/* Skip inactive CRTCs */
+		if (!crtc->fb)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		intel_increase_pllclock(crtc);
+	}
+
+	intel_disable_fbc(dev);
+
+	if (IS_IRONLAKE_M(dev))
+		ironlake_disable_drps(dev);
+	if (IS_GEN6(dev) || IS_GEN7(dev))
+		gen6_disable_rps(dev);
+
+	if (IS_IRONLAKE_M(dev))
+		ironlake_disable_rc6(dev);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	/* Disable the irq before mode object teardown, for the irq might
+	 * enqueue unpin/hotplug work. */
+	drm_irq_uninstall(dev);
+	cancel_work_sync(&dev_priv->hotplug_work);
+	cancel_work_sync(&dev_priv->rps_work);
+
+	/* flush any delayed tasks or pending work */
+	flush_scheduled_work();
+
+	/* Shut off idle work before the crtcs get freed. */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		intel_crtc = to_intel_crtc(crtc);
+		del_timer_sync(&intel_crtc->idle_timer);
+	}
+	del_timer_sync(&dev_priv->idle_timer);
+	cancel_work_sync(&dev_priv->idle_work);
+
+	drm_mode_config_cleanup(dev);
+}
+
+/*
+ * Return which encoder is currently attached for connector.
+ */
+struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
+{
+	return &intel_attached_encoder(connector)->base;
+}
+
+void intel_connector_attach_encoder(struct intel_connector *connector,
+				    struct intel_encoder *encoder)
+{
+	connector->encoder = encoder;
+	drm_mode_connector_attach_encoder(&connector->base,
+					  &encoder->base);
+}
+
+/*
+ * set vga decode state - true == enable VGA decode
+ */
+int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u16 gmch_ctrl;
+
+	pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl);
+	if (state)
+		gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
+	else
+		gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
+	pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl);
+	return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/seq_file.h>
+
+struct intel_display_error_state {
+	struct intel_cursor_error_state {
+		u32 control;
+		u32 position;
+		u32 base;
+		u32 size;
+	} cursor[2];
+
+	struct intel_pipe_error_state {
+		u32 conf;
+		u32 source;
+
+		u32 htotal;
+		u32 hblank;
+		u32 hsync;
+		u32 vtotal;
+		u32 vblank;
+		u32 vsync;
+	} pipe[2];
+
+	struct intel_plane_error_state {
+		u32 control;
+		u32 stride;
+		u32 size;
+		u32 pos;
+		u32 addr;
+		u32 surface;
+		u32 tile_offset;
+	} plane[2];
+};
+
+struct intel_display_error_state *
+intel_display_capture_error_state(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_display_error_state *error;
+	int i;
+
+	error = kmalloc(sizeof(*error), GFP_ATOMIC);
+	if (error == NULL)
+		return NULL;
+
+	for (i = 0; i < 2; i++) {
+		error->cursor[i].control = I915_READ(CURCNTR(i));
+		error->cursor[i].position = I915_READ(CURPOS(i));
+		error->cursor[i].base = I915_READ(CURBASE(i));
+
+		error->plane[i].control = I915_READ(DSPCNTR(i));
+		error->plane[i].stride = I915_READ(DSPSTRIDE(i));
+		error->plane[i].size = I915_READ(DSPSIZE(i));
+		error->plane[i].pos = I915_READ(DSPPOS(i));
+		error->plane[i].addr = I915_READ(DSPADDR(i));
+		if (INTEL_INFO(dev)->gen >= 4) {
+			error->plane[i].surface = I915_READ(DSPSURF(i));
+			error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
+		}
+
+		error->pipe[i].conf = I915_READ(PIPECONF(i));
+		error->pipe[i].source = I915_READ(PIPESRC(i));
+		error->pipe[i].htotal = I915_READ(HTOTAL(i));
+		error->pipe[i].hblank = I915_READ(HBLANK(i));
+		error->pipe[i].hsync = I915_READ(HSYNC(i));
+		error->pipe[i].vtotal = I915_READ(VTOTAL(i));
+		error->pipe[i].vblank = I915_READ(VBLANK(i));
+		error->pipe[i].vsync = I915_READ(VSYNC(i));
+	}
+
+	return error;
+}
+
+void
+intel_display_print_error_state(struct seq_file *m,
+				struct drm_device *dev,
+				struct intel_display_error_state *error)
+{
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		seq_printf(m, "Pipe [%d]:\n", i);
+		seq_printf(m, "  CONF: %08x\n", error->pipe[i].conf);
+		seq_printf(m, "  SRC: %08x\n", error->pipe[i].source);
+		seq_printf(m, "  HTOTAL: %08x\n", error->pipe[i].htotal);
+		seq_printf(m, "  HBLANK: %08x\n", error->pipe[i].hblank);
+		seq_printf(m, "  HSYNC: %08x\n", error->pipe[i].hsync);
+		seq_printf(m, "  VTOTAL: %08x\n", error->pipe[i].vtotal);
+		seq_printf(m, "  VBLANK: %08x\n", error->pipe[i].vblank);
+		seq_printf(m, "  VSYNC: %08x\n", error->pipe[i].vsync);
+
+		seq_printf(m, "Plane [%d]:\n", i);
+		seq_printf(m, "  CNTR: %08x\n", error->plane[i].control);
+		seq_printf(m, "  STRIDE: %08x\n", error->plane[i].stride);
+		seq_printf(m, "  SIZE: %08x\n", error->plane[i].size);
+		seq_printf(m, "  POS: %08x\n", error->plane[i].pos);
+		seq_printf(m, "  ADDR: %08x\n", error->plane[i].addr);
+		if (INTEL_INFO(dev)->gen >= 4) {
+			seq_printf(m, "  SURF: %08x\n", error->plane[i].surface);
+			seq_printf(m, "  TILEOFF: %08x\n", error->plane[i].tile_offset);
+		}
+
+		seq_printf(m, "Cursor [%d]:\n", i);
+		seq_printf(m, "  CNTR: %08x\n", error->cursor[i].control);
+		seq_printf(m, "  POS: %08x\n", error->cursor[i].position);
+		seq_printf(m, "  BASE: %08x\n", error->cursor[i].base);
+	}
+}
+#endif
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
new file mode 100644
index 00000000..68624218
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -0,0 +1,2566 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Keith Packard <keithp@keithp.com>
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "drm_dp_helper.h"
+
+#define DP_RECEIVER_CAP_SIZE	0xf
+#define DP_LINK_STATUS_SIZE	6
+#define DP_LINK_CHECK_TIMEOUT	(10 * 1000)
+
+#define DP_LINK_CONFIGURATION_SIZE	9
+
+struct intel_dp {
+	struct intel_encoder base;
+	uint32_t output_reg;
+	uint32_t DP;
+	uint8_t  link_configuration[DP_LINK_CONFIGURATION_SIZE];
+	bool has_audio;
+	enum hdmi_force_audio force_audio;
+	uint32_t color_range;
+	int dpms_mode;
+	uint8_t link_bw;
+	uint8_t lane_count;
+	uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
+	struct i2c_adapter adapter;
+	struct i2c_algo_dp_aux_data algo;
+	bool is_pch_edp;
+	uint8_t	train_set[4];
+	int panel_power_up_delay;
+	int panel_power_down_delay;
+	int panel_power_cycle_delay;
+	int backlight_on_delay;
+	int backlight_off_delay;
+	struct drm_display_mode *panel_fixed_mode;  /* for eDP */
+	struct delayed_work panel_vdd_work;
+	bool want_panel_vdd;
+};
+
+/**
+ * is_edp - is the given port attached to an eDP panel (either CPU or PCH)
+ * @intel_dp: DP struct
+ *
+ * If a CPU or PCH DP output is attached to an eDP panel, this function
+ * will return true, and false otherwise.
+ */
+static bool is_edp(struct intel_dp *intel_dp)
+{
+	return intel_dp->base.type == INTEL_OUTPUT_EDP;
+}
+
+/**
+ * is_pch_edp - is the port on the PCH and attached to an eDP panel?
+ * @intel_dp: DP struct
+ *
+ * Returns true if the given DP struct corresponds to a PCH DP port attached
+ * to an eDP panel, false otherwise.  Helpful for determining whether we
+ * may need FDI resources for a given DP output or not.
+ */
+static bool is_pch_edp(struct intel_dp *intel_dp)
+{
+	return intel_dp->is_pch_edp;
+}
+
+/**
+ * is_cpu_edp - is the port on the CPU and attached to an eDP panel?
+ * @intel_dp: DP struct
+ *
+ * Returns true if the given DP struct corresponds to a CPU eDP port.
+ */
+static bool is_cpu_edp(struct intel_dp *intel_dp)
+{
+	return is_edp(intel_dp) && !is_pch_edp(intel_dp);
+}
+
+static struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct intel_dp, base.base);
+}
+
+static struct intel_dp *intel_attached_dp(struct drm_connector *connector)
+{
+	return container_of(intel_attached_encoder(connector),
+			    struct intel_dp, base);
+}
+
+/**
+ * intel_encoder_is_pch_edp - is the given encoder a PCH attached eDP?
+ * @encoder: DRM encoder
+ *
+ * Return true if @encoder corresponds to a PCH attached eDP panel.  Needed
+ * by intel_display.c.
+ */
+bool intel_encoder_is_pch_edp(struct drm_encoder *encoder)
+{
+	struct intel_dp *intel_dp;
+
+	if (!encoder)
+		return false;
+
+	intel_dp = enc_to_intel_dp(encoder);
+
+	return is_pch_edp(intel_dp);
+}
+
+static void intel_dp_start_link_train(struct intel_dp *intel_dp);
+static void intel_dp_complete_link_train(struct intel_dp *intel_dp);
+static void intel_dp_link_down(struct intel_dp *intel_dp);
+
+void
+intel_edp_link_config(struct intel_encoder *intel_encoder,
+		       int *lane_num, int *link_bw)
+{
+	struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base);
+
+	*lane_num = intel_dp->lane_count;
+	if (intel_dp->link_bw == DP_LINK_BW_1_62)
+		*link_bw = 162000;
+	else if (intel_dp->link_bw == DP_LINK_BW_2_7)
+		*link_bw = 270000;
+}
+
+static int
+intel_dp_max_lane_count(struct intel_dp *intel_dp)
+{
+	int max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f;
+	switch (max_lane_count) {
+	case 1: case 2: case 4:
+		break;
+	default:
+		max_lane_count = 4;
+	}
+	return max_lane_count;
+}
+
+static int
+intel_dp_max_link_bw(struct intel_dp *intel_dp)
+{
+	int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE];
+
+	switch (max_link_bw) {
+	case DP_LINK_BW_1_62:
+	case DP_LINK_BW_2_7:
+		break;
+	default:
+		max_link_bw = DP_LINK_BW_1_62;
+		break;
+	}
+	return max_link_bw;
+}
+
+static int
+intel_dp_link_clock(uint8_t link_bw)
+{
+	if (link_bw == DP_LINK_BW_2_7)
+		return 270000;
+	else
+		return 162000;
+}
+
+/*
+ * The units on the numbers in the next two are... bizarre.  Examples will
+ * make it clearer; this one parallels an example in the eDP spec.
+ *
+ * intel_dp_max_data_rate for one lane of 2.7GHz evaluates as:
+ *
+ *     270000 * 1 * 8 / 10 == 216000
+ *
+ * The actual data capacity of that configuration is 2.16Gbit/s, so the
+ * units are decakilobits.  ->clock in a drm_display_mode is in kilohertz -
+ * or equivalently, kilopixels per second - so for 1680x1050R it'd be
+ * 119000.  At 18bpp that's 2142000 kilobits per second.
+ *
+ * Thus the strange-looking division by 10 in intel_dp_link_required, to
+ * get the result in decakilobits instead of kilobits.
+ */
+
+static int
+intel_dp_link_required(int pixel_clock, int bpp)
+{
+	return (pixel_clock * bpp + 9) / 10;
+}
+
+static int
+intel_dp_max_data_rate(int max_link_clock, int max_lanes)
+{
+	return (max_link_clock * max_lanes * 8) / 10;
+}
+
+static bool
+intel_dp_adjust_dithering(struct intel_dp *intel_dp,
+			  struct drm_display_mode *mode,
+			  struct drm_display_mode *adjusted_mode)
+{
+	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
+	int max_lanes = intel_dp_max_lane_count(intel_dp);
+	int max_rate, mode_rate;
+
+	mode_rate = intel_dp_link_required(mode->clock, 24);
+	max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
+
+	if (mode_rate > max_rate) {
+		mode_rate = intel_dp_link_required(mode->clock, 18);
+		if (mode_rate > max_rate)
+			return false;
+
+		if (adjusted_mode)
+			adjusted_mode->private_flags
+				|= INTEL_MODE_DP_FORCE_6BPC;
+
+		return true;
+	}
+
+	return true;
+}
+
+static int
+intel_dp_mode_valid(struct drm_connector *connector,
+		    struct drm_display_mode *mode)
+{
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+
+	if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
+		if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay)
+			return MODE_PANEL;
+
+		if (mode->vdisplay > intel_dp->panel_fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
+	if (!intel_dp_adjust_dithering(intel_dp, mode, NULL))
+		return MODE_CLOCK_HIGH;
+
+	if (mode->clock < 10000)
+		return MODE_CLOCK_LOW;
+
+	return MODE_OK;
+}
+
+static uint32_t
+pack_aux(uint8_t *src, int src_bytes)
+{
+	int	i;
+	uint32_t v = 0;
+
+	if (src_bytes > 4)
+		src_bytes = 4;
+	for (i = 0; i < src_bytes; i++)
+		v |= ((uint32_t) src[i]) << ((3-i) * 8);
+	return v;
+}
+
+static void
+unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
+{
+	int i;
+	if (dst_bytes > 4)
+		dst_bytes = 4;
+	for (i = 0; i < dst_bytes; i++)
+		dst[i] = src >> ((3-i) * 8);
+}
+
+/* hrawclock is 1/4 the FSB frequency */
+static int
+intel_hrawclk(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t clkcfg;
+
+	clkcfg = I915_READ(CLKCFG);
+	switch (clkcfg & CLKCFG_FSB_MASK) {
+	case CLKCFG_FSB_400:
+		return 100;
+	case CLKCFG_FSB_533:
+		return 133;
+	case CLKCFG_FSB_667:
+		return 166;
+	case CLKCFG_FSB_800:
+		return 200;
+	case CLKCFG_FSB_1067:
+		return 266;
+	case CLKCFG_FSB_1333:
+		return 333;
+	/* these two are just a guess; one of them might be right */
+	case CLKCFG_FSB_1600:
+	case CLKCFG_FSB_1600_ALT:
+		return 400;
+	default:
+		return 133;
+	}
+}
+
+static bool ironlake_edp_have_panel_power(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	return (I915_READ(PCH_PP_STATUS) & PP_ON) != 0;
+}
+
+static bool ironlake_edp_have_panel_vdd(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	return (I915_READ(PCH_PP_CONTROL) & EDP_FORCE_VDD) != 0;
+}
+
+static void
+intel_dp_check_edp(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (!is_edp(intel_dp))
+		return;
+	if (!ironlake_edp_have_panel_power(intel_dp) && !ironlake_edp_have_panel_vdd(intel_dp)) {
+		WARN(1, "eDP powered off while attempting aux channel communication.\n");
+		DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n",
+			      I915_READ(PCH_PP_STATUS),
+			      I915_READ(PCH_PP_CONTROL));
+	}
+}
+
+static int
+intel_dp_aux_ch(struct intel_dp *intel_dp,
+		uint8_t *send, int send_bytes,
+		uint8_t *recv, int recv_size)
+{
+	uint32_t output_reg = intel_dp->output_reg;
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t ch_ctl = output_reg + 0x10;
+	uint32_t ch_data = ch_ctl + 4;
+	int i;
+	int recv_bytes;
+	uint32_t status;
+	uint32_t aux_clock_divider;
+	int try, precharge;
+
+	intel_dp_check_edp(intel_dp);
+	/* The clock divider is based off the hrawclk,
+	 * and would like to run at 2MHz. So, take the
+	 * hrawclk value and divide by 2 and use that
+	 *
+	 * Note that PCH attached eDP panels should use a 125MHz input
+	 * clock divider.
+	 */
+	if (is_cpu_edp(intel_dp)) {
+		if (IS_GEN6(dev) || IS_GEN7(dev))
+			aux_clock_divider = 200; /* SNB & IVB eDP input clock at 400Mhz */
+		else
+			aux_clock_divider = 225; /* eDP input clock at 450Mhz */
+	} else if (HAS_PCH_SPLIT(dev))
+		aux_clock_divider = 63; /* IRL input clock fixed at 125Mhz */
+	else
+		aux_clock_divider = intel_hrawclk(dev) / 2;
+
+	if (IS_GEN6(dev))
+		precharge = 3;
+	else
+		precharge = 5;
+
+	/* Try to wait for any previous AUX channel activity */
+	for (try = 0; try < 3; try++) {
+		status = I915_READ(ch_ctl);
+		if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+			break;
+		msleep(1);
+	}
+
+	if (try == 3) {
+		WARN(1, "dp_aux_ch not started status 0x%08x\n",
+		     I915_READ(ch_ctl));
+		return -EBUSY;
+	}
+
+	/* Must try at least 3 times according to DP spec */
+	for (try = 0; try < 5; try++) {
+		/* Load the send data into the aux channel data registers */
+		for (i = 0; i < send_bytes; i += 4)
+			I915_WRITE(ch_data + i,
+				   pack_aux(send + i, send_bytes - i));
+
+		/* Send the command and wait for it to complete */
+		I915_WRITE(ch_ctl,
+			   DP_AUX_CH_CTL_SEND_BUSY |
+			   DP_AUX_CH_CTL_TIME_OUT_400us |
+			   (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+			   (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
+			   (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |
+			   DP_AUX_CH_CTL_DONE |
+			   DP_AUX_CH_CTL_TIME_OUT_ERROR |
+			   DP_AUX_CH_CTL_RECEIVE_ERROR);
+		for (;;) {
+			status = I915_READ(ch_ctl);
+			if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+				break;
+			udelay(100);
+		}
+
+		/* Clear done status and any errors */
+		I915_WRITE(ch_ctl,
+			   status |
+			   DP_AUX_CH_CTL_DONE |
+			   DP_AUX_CH_CTL_TIME_OUT_ERROR |
+			   DP_AUX_CH_CTL_RECEIVE_ERROR);
+
+		if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR |
+			      DP_AUX_CH_CTL_RECEIVE_ERROR))
+			continue;
+		if (status & DP_AUX_CH_CTL_DONE)
+			break;
+	}
+
+	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
+		DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
+		return -EBUSY;
+	}
+
+	/* Check for timeout or receive error.
+	 * Timeouts occur when the sink is not connected
+	 */
+	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
+		DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
+		return -EIO;
+	}
+
+	/* Timeouts occur when the device isn't connected, so they're
+	 * "normal" -- don't fill the kernel log with these */
+	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
+		DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
+		return -ETIMEDOUT;
+	}
+
+	/* Unload any bytes sent back from the other side */
+	recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
+		      DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
+	if (recv_bytes > recv_size)
+		recv_bytes = recv_size;
+
+	for (i = 0; i < recv_bytes; i += 4)
+		unpack_aux(I915_READ(ch_data + i),
+			   recv + i, recv_bytes - i);
+
+	return recv_bytes;
+}
+
+/* Write data to the aux channel in native mode */
+static int
+intel_dp_aux_native_write(struct intel_dp *intel_dp,
+			  uint16_t address, uint8_t *send, int send_bytes)
+{
+	int ret;
+	uint8_t	msg[20];
+	int msg_bytes;
+	uint8_t	ack;
+
+	intel_dp_check_edp(intel_dp);
+	if (send_bytes > 16)
+		return -1;
+	msg[0] = AUX_NATIVE_WRITE << 4;
+	msg[1] = address >> 8;
+	msg[2] = address & 0xff;
+	msg[3] = send_bytes - 1;
+	memcpy(&msg[4], send, send_bytes);
+	msg_bytes = send_bytes + 4;
+	for (;;) {
+		ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes, &ack, 1);
+		if (ret < 0)
+			return ret;
+		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
+			break;
+		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+			udelay(100);
+		else
+			return -EIO;
+	}
+	return send_bytes;
+}
+
+/* Write a single byte to the aux channel in native mode */
+static int
+intel_dp_aux_native_write_1(struct intel_dp *intel_dp,
+			    uint16_t address, uint8_t byte)
+{
+	return intel_dp_aux_native_write(intel_dp, address, &byte, 1);
+}
+
+/* read bytes from a native aux channel */
+static int
+intel_dp_aux_native_read(struct intel_dp *intel_dp,
+			 uint16_t address, uint8_t *recv, int recv_bytes)
+{
+	uint8_t msg[4];
+	int msg_bytes;
+	uint8_t reply[20];
+	int reply_bytes;
+	uint8_t ack;
+	int ret;
+
+	intel_dp_check_edp(intel_dp);
+	msg[0] = AUX_NATIVE_READ << 4;
+	msg[1] = address >> 8;
+	msg[2] = address & 0xff;
+	msg[3] = recv_bytes - 1;
+
+	msg_bytes = 4;
+	reply_bytes = recv_bytes + 1;
+
+	for (;;) {
+		ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes,
+				      reply, reply_bytes);
+		if (ret == 0)
+			return -EPROTO;
+		if (ret < 0)
+			return ret;
+		ack = reply[0];
+		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) {
+			memcpy(recv, reply + 1, ret - 1);
+			return ret - 1;
+		}
+		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+			udelay(100);
+		else
+			return -EIO;
+	}
+}
+
+static int
+intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
+		    uint8_t write_byte, uint8_t *read_byte)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	struct intel_dp *intel_dp = container_of(adapter,
+						struct intel_dp,
+						adapter);
+	uint16_t address = algo_data->address;
+	uint8_t msg[5];
+	uint8_t reply[2];
+	unsigned retry;
+	int msg_bytes;
+	int reply_bytes;
+	int ret;
+
+	intel_dp_check_edp(intel_dp);
+	/* Set up the command byte */
+	if (mode & MODE_I2C_READ)
+		msg[0] = AUX_I2C_READ << 4;
+	else
+		msg[0] = AUX_I2C_WRITE << 4;
+
+	if (!(mode & MODE_I2C_STOP))
+		msg[0] |= AUX_I2C_MOT << 4;
+
+	msg[1] = address >> 8;
+	msg[2] = address;
+
+	switch (mode) {
+	case MODE_I2C_WRITE:
+		msg[3] = 0;
+		msg[4] = write_byte;
+		msg_bytes = 5;
+		reply_bytes = 1;
+		break;
+	case MODE_I2C_READ:
+		msg[3] = 0;
+		msg_bytes = 4;
+		reply_bytes = 2;
+		break;
+	default:
+		msg_bytes = 3;
+		reply_bytes = 1;
+		break;
+	}
+
+	for (retry = 0; retry < 5; retry++) {
+		ret = intel_dp_aux_ch(intel_dp,
+				      msg, msg_bytes,
+				      reply, reply_bytes);
+		if (ret < 0) {
+			DRM_DEBUG_KMS("aux_ch failed %d\n", ret);
+			return ret;
+		}
+
+		switch (reply[0] & AUX_NATIVE_REPLY_MASK) {
+		case AUX_NATIVE_REPLY_ACK:
+			/* I2C-over-AUX Reply field is only valid
+			 * when paired with AUX ACK.
+			 */
+			break;
+		case AUX_NATIVE_REPLY_NACK:
+			DRM_DEBUG_KMS("aux_ch native nack\n");
+			return -EREMOTEIO;
+		case AUX_NATIVE_REPLY_DEFER:
+			udelay(100);
+			continue;
+		default:
+			DRM_ERROR("aux_ch invalid native reply 0x%02x\n",
+				  reply[0]);
+			return -EREMOTEIO;
+		}
+
+		switch (reply[0] & AUX_I2C_REPLY_MASK) {
+		case AUX_I2C_REPLY_ACK:
+			if (mode == MODE_I2C_READ) {
+				*read_byte = reply[1];
+			}
+			return reply_bytes - 1;
+		case AUX_I2C_REPLY_NACK:
+			DRM_DEBUG_KMS("aux_i2c nack\n");
+			return -EREMOTEIO;
+		case AUX_I2C_REPLY_DEFER:
+			DRM_DEBUG_KMS("aux_i2c defer\n");
+			udelay(100);
+			break;
+		default:
+			DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]);
+			return -EREMOTEIO;
+		}
+	}
+
+	DRM_ERROR("too many retries, giving up\n");
+	return -EREMOTEIO;
+}
+
+static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp);
+static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);
+
+static int
+intel_dp_i2c_init(struct intel_dp *intel_dp,
+		  struct intel_connector *intel_connector, const char *name)
+{
+	int	ret;
+
+	DRM_DEBUG_KMS("i2c_init %s\n", name);
+	intel_dp->algo.running = false;
+	intel_dp->algo.address = 0;
+	intel_dp->algo.aux_ch = intel_dp_i2c_aux_ch;
+
+	memset(&intel_dp->adapter, '\0', sizeof(intel_dp->adapter));
+	intel_dp->adapter.owner = THIS_MODULE;
+	intel_dp->adapter.class = I2C_CLASS_DDC;
+	strncpy(intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1);
+	intel_dp->adapter.name[sizeof(intel_dp->adapter.name) - 1] = '\0';
+	intel_dp->adapter.algo_data = &intel_dp->algo;
+	intel_dp->adapter.dev.parent = &intel_connector->base.kdev;
+
+	ironlake_edp_panel_vdd_on(intel_dp);
+	ret = i2c_dp_aux_add_bus(&intel_dp->adapter);
+	ironlake_edp_panel_vdd_off(intel_dp, false);
+	return ret;
+}
+
+static bool
+intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		    struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+	int lane_count, clock;
+	int max_lane_count = intel_dp_max_lane_count(intel_dp);
+	int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
+	int bpp;
+	static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
+
+	if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
+		intel_fixed_panel_mode(intel_dp->panel_fixed_mode, adjusted_mode);
+		intel_pch_panel_fitting(dev, DRM_MODE_SCALE_FULLSCREEN,
+					mode, adjusted_mode);
+		/*
+		 * the mode->clock is used to calculate the Data&Link M/N
+		 * of the pipe. For the eDP the fixed clock should be used.
+		 */
+		mode->clock = intel_dp->panel_fixed_mode->clock;
+	}
+
+	if (!intel_dp_adjust_dithering(intel_dp, mode, adjusted_mode))
+		return false;
+
+	bpp = adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24;
+
+	for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
+		for (clock = 0; clock <= max_clock; clock++) {
+			int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
+
+			if (intel_dp_link_required(mode->clock, bpp)
+					<= link_avail) {
+				intel_dp->link_bw = bws[clock];
+				intel_dp->lane_count = lane_count;
+				adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
+				DRM_DEBUG_KMS("Display port link bw %02x lane "
+						"count %d clock %d\n",
+				       intel_dp->link_bw, intel_dp->lane_count,
+				       adjusted_mode->clock);
+				return true;
+			}
+		}
+	}
+
+	return false;
+}
+
+struct intel_dp_m_n {
+	uint32_t	tu;
+	uint32_t	gmch_m;
+	uint32_t	gmch_n;
+	uint32_t	link_m;
+	uint32_t	link_n;
+};
+
+static void
+intel_reduce_ratio(uint32_t *num, uint32_t *den)
+{
+	while (*num > 0xffffff || *den > 0xffffff) {
+		*num >>= 1;
+		*den >>= 1;
+	}
+}
+
+static void
+intel_dp_compute_m_n(int bpp,
+		     int nlanes,
+		     int pixel_clock,
+		     int link_clock,
+		     struct intel_dp_m_n *m_n)
+{
+	m_n->tu = 64;
+	m_n->gmch_m = (pixel_clock * bpp) >> 3;
+	m_n->gmch_n = link_clock * nlanes;
+	intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+	m_n->link_m = pixel_clock;
+	m_n->link_n = link_clock;
+	intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
+}
+
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+		 struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_encoder *encoder;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int lane_count = 4;
+	struct intel_dp_m_n m_n;
+	int pipe = intel_crtc->pipe;
+
+	/*
+	 * Find the lane count in the intel_encoder private
+	 */
+	list_for_each_entry(encoder, &mode_config->encoder_list, head) {
+		struct intel_dp *intel_dp;
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		intel_dp = enc_to_intel_dp(encoder);
+		if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
+		    intel_dp->base.type == INTEL_OUTPUT_EDP)
+		{
+			lane_count = intel_dp->lane_count;
+			break;
+		}
+	}
+
+	/*
+	 * Compute the GMCH and Link ratios. The '3' here is
+	 * the number of bytes_per_pixel post-LUT, which we always
+	 * set up for 8-bits of R/G/B, or 3 bytes total.
+	 */
+	intel_dp_compute_m_n(intel_crtc->bpp, lane_count,
+			     mode->clock, adjusted_mode->clock, &m_n);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(TRANSDATA_M1(pipe),
+			   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+			   m_n.gmch_m);
+		I915_WRITE(TRANSDATA_N1(pipe), m_n.gmch_n);
+		I915_WRITE(TRANSDPLINK_M1(pipe), m_n.link_m);
+		I915_WRITE(TRANSDPLINK_N1(pipe), m_n.link_n);
+	} else {
+		I915_WRITE(PIPE_GMCH_DATA_M(pipe),
+			   ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+			   m_n.gmch_m);
+		I915_WRITE(PIPE_GMCH_DATA_N(pipe), m_n.gmch_n);
+		I915_WRITE(PIPE_DP_LINK_M(pipe), m_n.link_m);
+		I915_WRITE(PIPE_DP_LINK_N(pipe), m_n.link_n);
+	}
+}
+
+static void ironlake_edp_pll_on(struct drm_encoder *encoder);
+static void ironlake_edp_pll_off(struct drm_encoder *encoder);
+
+static void
+intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		  struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+	struct drm_crtc *crtc = intel_dp->base.base.crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	/* Turn on the eDP PLL if needed */
+	if (is_edp(intel_dp)) {
+		if (!is_pch_edp(intel_dp))
+			ironlake_edp_pll_on(encoder);
+		else
+			ironlake_edp_pll_off(encoder);
+	}
+
+	/*
+	 * There are four kinds of DP registers:
+	 *
+	 * 	IBX PCH
+	 * 	SNB CPU
+	 *	IVB CPU
+	 * 	CPT PCH
+	 *
+	 * IBX PCH and CPU are the same for almost everything,
+	 * except that the CPU DP PLL is configured in this
+	 * register
+	 *
+	 * CPT PCH is quite different, having many bits moved
+	 * to the TRANS_DP_CTL register instead. That
+	 * configuration happens (oddly) in ironlake_pch_enable
+	 */
+
+	/* Preserve the BIOS-computed detected bit. This is
+	 * supposed to be read-only.
+	 */
+	intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED;
+	intel_dp->DP |=  DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
+
+	/* Handle DP bits in common between all three register formats */
+
+	intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
+
+	switch (intel_dp->lane_count) {
+	case 1:
+		intel_dp->DP |= DP_PORT_WIDTH_1;
+		break;
+	case 2:
+		intel_dp->DP |= DP_PORT_WIDTH_2;
+		break;
+	case 4:
+		intel_dp->DP |= DP_PORT_WIDTH_4;
+		break;
+	}
+	if (intel_dp->has_audio) {
+		DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
+				 pipe_name(intel_crtc->pipe));
+		intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
+		intel_write_eld(encoder, adjusted_mode);
+	}
+	memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
+	intel_dp->link_configuration[0] = intel_dp->link_bw;
+	intel_dp->link_configuration[1] = intel_dp->lane_count;
+	intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B;
+	/*
+	 * Check for DPCD version > 1.1 and enhanced framing support
+	 */
+	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
+	    (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
+		intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+	}
+
+	/* Split out the IBX/CPU vs CPT settings */
+
+	if (is_cpu_edp(intel_dp) && IS_GEN7(dev)) {
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+			intel_dp->DP |= DP_SYNC_HS_HIGH;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+			intel_dp->DP |= DP_SYNC_VS_HIGH;
+		intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
+
+		if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
+			intel_dp->DP |= DP_ENHANCED_FRAMING;
+
+		intel_dp->DP |= intel_crtc->pipe << 29;
+
+		/* don't miss out required setting for eDP */
+		intel_dp->DP |= DP_PLL_ENABLE;
+		if (adjusted_mode->clock < 200000)
+			intel_dp->DP |= DP_PLL_FREQ_160MHZ;
+		else
+			intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+	} else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
+		intel_dp->DP |= intel_dp->color_range;
+
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+			intel_dp->DP |= DP_SYNC_HS_HIGH;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+			intel_dp->DP |= DP_SYNC_VS_HIGH;
+		intel_dp->DP |= DP_LINK_TRAIN_OFF;
+
+		if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
+			intel_dp->DP |= DP_ENHANCED_FRAMING;
+
+		if (intel_crtc->pipe == 1)
+			intel_dp->DP |= DP_PIPEB_SELECT;
+
+		if (is_cpu_edp(intel_dp)) {
+			/* don't miss out required setting for eDP */
+			intel_dp->DP |= DP_PLL_ENABLE;
+			if (adjusted_mode->clock < 200000)
+				intel_dp->DP |= DP_PLL_FREQ_160MHZ;
+			else
+				intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+		}
+	} else {
+		intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
+	}
+}
+
+#define IDLE_ON_MASK		(PP_ON | 0 	  | PP_SEQUENCE_MASK | 0                     | PP_SEQUENCE_STATE_MASK)
+#define IDLE_ON_VALUE   	(PP_ON | 0 	  | PP_SEQUENCE_NONE | 0                     | PP_SEQUENCE_STATE_ON_IDLE)
+
+#define IDLE_OFF_MASK		(PP_ON | 0        | PP_SEQUENCE_MASK | 0                     | PP_SEQUENCE_STATE_MASK)
+#define IDLE_OFF_VALUE		(0     | 0        | PP_SEQUENCE_NONE | 0                     | PP_SEQUENCE_STATE_OFF_IDLE)
+
+#define IDLE_CYCLE_MASK		(PP_ON | 0        | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK)
+#define IDLE_CYCLE_VALUE	(0     | 0        | PP_SEQUENCE_NONE | 0                     | PP_SEQUENCE_STATE_OFF_IDLE)
+
+static void ironlake_wait_panel_status(struct intel_dp *intel_dp,
+				       u32 mask,
+				       u32 value)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
+		      mask, value,
+		      I915_READ(PCH_PP_STATUS),
+		      I915_READ(PCH_PP_CONTROL));
+
+	if (_wait_for((I915_READ(PCH_PP_STATUS) & mask) == value, 5000, 10)) {
+		DRM_ERROR("Panel status timeout: status %08x control %08x\n",
+			  I915_READ(PCH_PP_STATUS),
+			  I915_READ(PCH_PP_CONTROL));
+	}
+}
+
+static void ironlake_wait_panel_on(struct intel_dp *intel_dp)
+{
+	DRM_DEBUG_KMS("Wait for panel power on\n");
+	ironlake_wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE);
+}
+
+static void ironlake_wait_panel_off(struct intel_dp *intel_dp)
+{
+	DRM_DEBUG_KMS("Wait for panel power off time\n");
+	ironlake_wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE);
+}
+
+static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp)
+{
+	DRM_DEBUG_KMS("Wait for panel power cycle\n");
+	ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
+}
+
+
+/* Read the current pp_control value, unlocking the register if it
+ * is locked
+ */
+
+static  u32 ironlake_get_pp_control(struct drm_i915_private *dev_priv)
+{
+	u32	control = I915_READ(PCH_PP_CONTROL);
+
+	control &= ~PANEL_UNLOCK_MASK;
+	control |= PANEL_UNLOCK_REGS;
+	return control;
+}
+
+static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp;
+
+	if (!is_edp(intel_dp))
+		return;
+	DRM_DEBUG_KMS("Turn eDP VDD on\n");
+
+	WARN(intel_dp->want_panel_vdd,
+	     "eDP VDD already requested on\n");
+
+	intel_dp->want_panel_vdd = true;
+
+	if (ironlake_edp_have_panel_vdd(intel_dp)) {
+		DRM_DEBUG_KMS("eDP VDD already on\n");
+		return;
+	}
+
+	if (!ironlake_edp_have_panel_power(intel_dp))
+		ironlake_wait_panel_power_cycle(intel_dp);
+
+	pp = ironlake_get_pp_control(dev_priv);
+	pp |= EDP_FORCE_VDD;
+	I915_WRITE(PCH_PP_CONTROL, pp);
+	POSTING_READ(PCH_PP_CONTROL);
+	DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n",
+		      I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL));
+
+	/*
+	 * If the panel wasn't on, delay before accessing aux channel
+	 */
+	if (!ironlake_edp_have_panel_power(intel_dp)) {
+		DRM_DEBUG_KMS("eDP was not running\n");
+		msleep(intel_dp->panel_power_up_delay);
+	}
+}
+
+static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp;
+
+	if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) {
+		pp = ironlake_get_pp_control(dev_priv);
+		pp &= ~EDP_FORCE_VDD;
+		I915_WRITE(PCH_PP_CONTROL, pp);
+		POSTING_READ(PCH_PP_CONTROL);
+
+		/* Make sure sequencer is idle before allowing subsequent activity */
+		DRM_DEBUG_KMS("PCH_PP_STATUS: 0x%08x PCH_PP_CONTROL: 0x%08x\n",
+			      I915_READ(PCH_PP_STATUS), I915_READ(PCH_PP_CONTROL));
+
+		msleep(intel_dp->panel_power_down_delay);
+	}
+}
+
+static void ironlake_panel_vdd_work(struct work_struct *__work)
+{
+	struct intel_dp *intel_dp = container_of(to_delayed_work(__work),
+						 struct intel_dp, panel_vdd_work);
+	struct drm_device *dev = intel_dp->base.base.dev;
+
+	mutex_lock(&dev->mode_config.mutex);
+	ironlake_panel_vdd_off_sync(intel_dp);
+	mutex_unlock(&dev->mode_config.mutex);
+}
+
+static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
+{
+	if (!is_edp(intel_dp))
+		return;
+
+	DRM_DEBUG_KMS("Turn eDP VDD off %d\n", intel_dp->want_panel_vdd);
+	WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on");
+
+	intel_dp->want_panel_vdd = false;
+
+	if (sync) {
+		ironlake_panel_vdd_off_sync(intel_dp);
+	} else {
+		/*
+		 * Queue the timer to fire a long
+		 * time from now (relative to the power down delay)
+		 * to keep the panel power up across a sequence of operations
+		 */
+		schedule_delayed_work(&intel_dp->panel_vdd_work,
+				      msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5));
+	}
+}
+
+static void ironlake_edp_panel_on(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp;
+
+	if (!is_edp(intel_dp))
+		return;
+
+	DRM_DEBUG_KMS("Turn eDP power on\n");
+
+	if (ironlake_edp_have_panel_power(intel_dp)) {
+		DRM_DEBUG_KMS("eDP power already on\n");
+		return;
+	}
+
+	ironlake_wait_panel_power_cycle(intel_dp);
+
+	pp = ironlake_get_pp_control(dev_priv);
+	if (IS_GEN5(dev)) {
+		/* ILK workaround: disable reset around power sequence */
+		pp &= ~PANEL_POWER_RESET;
+		I915_WRITE(PCH_PP_CONTROL, pp);
+		POSTING_READ(PCH_PP_CONTROL);
+	}
+
+	pp |= POWER_TARGET_ON;
+	if (!IS_GEN5(dev))
+		pp |= PANEL_POWER_RESET;
+
+	I915_WRITE(PCH_PP_CONTROL, pp);
+	POSTING_READ(PCH_PP_CONTROL);
+
+	ironlake_wait_panel_on(intel_dp);
+
+	if (IS_GEN5(dev)) {
+		pp |= PANEL_POWER_RESET; /* restore panel reset bit */
+		I915_WRITE(PCH_PP_CONTROL, pp);
+		POSTING_READ(PCH_PP_CONTROL);
+	}
+}
+
+static void ironlake_edp_panel_off(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp;
+
+	if (!is_edp(intel_dp))
+		return;
+
+	DRM_DEBUG_KMS("Turn eDP power off\n");
+
+	WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n");
+
+	pp = ironlake_get_pp_control(dev_priv);
+	pp &= ~(POWER_TARGET_ON | PANEL_POWER_RESET | EDP_BLC_ENABLE);
+	I915_WRITE(PCH_PP_CONTROL, pp);
+	POSTING_READ(PCH_PP_CONTROL);
+
+	ironlake_wait_panel_off(intel_dp);
+}
+
+static void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp;
+
+	if (!is_edp(intel_dp))
+		return;
+
+	DRM_DEBUG_KMS("\n");
+	/*
+	 * If we enable the backlight right away following a panel power
+	 * on, we may see slight flicker as the panel syncs with the eDP
+	 * link.  So delay a bit to make sure the image is solid before
+	 * allowing it to appear.
+	 */
+	msleep(intel_dp->backlight_on_delay);
+	pp = ironlake_get_pp_control(dev_priv);
+	pp |= EDP_BLC_ENABLE;
+	I915_WRITE(PCH_PP_CONTROL, pp);
+	POSTING_READ(PCH_PP_CONTROL);
+}
+
+static void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp;
+
+	if (!is_edp(intel_dp))
+		return;
+
+	DRM_DEBUG_KMS("\n");
+	pp = ironlake_get_pp_control(dev_priv);
+	pp &= ~EDP_BLC_ENABLE;
+	I915_WRITE(PCH_PP_CONTROL, pp);
+	POSTING_READ(PCH_PP_CONTROL);
+	msleep(intel_dp->backlight_off_delay);
+}
+
+static void ironlake_edp_pll_on(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dpa_ctl;
+
+	DRM_DEBUG_KMS("\n");
+	dpa_ctl = I915_READ(DP_A);
+	dpa_ctl |= DP_PLL_ENABLE;
+	I915_WRITE(DP_A, dpa_ctl);
+	POSTING_READ(DP_A);
+	udelay(200);
+}
+
+static void ironlake_edp_pll_off(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dpa_ctl;
+
+	dpa_ctl = I915_READ(DP_A);
+	dpa_ctl &= ~DP_PLL_ENABLE;
+	I915_WRITE(DP_A, dpa_ctl);
+	POSTING_READ(DP_A);
+	udelay(200);
+}
+
+/* If the sink supports it, try to set the power state appropriately */
+static void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
+{
+	int ret, i;
+
+	/* Should have a valid DPCD by this point */
+	if (intel_dp->dpcd[DP_DPCD_REV] < 0x11)
+		return;
+
+	if (mode != DRM_MODE_DPMS_ON) {
+		ret = intel_dp_aux_native_write_1(intel_dp, DP_SET_POWER,
+						  DP_SET_POWER_D3);
+		if (ret != 1)
+			DRM_DEBUG_DRIVER("failed to write sink power state\n");
+	} else {
+		/*
+		 * When turning on, we need to retry for 1ms to give the sink
+		 * time to wake up.
+		 */
+		for (i = 0; i < 3; i++) {
+			ret = intel_dp_aux_native_write_1(intel_dp,
+							  DP_SET_POWER,
+							  DP_SET_POWER_D0);
+			if (ret == 1)
+				break;
+			msleep(1);
+		}
+	}
+}
+
+static void intel_dp_prepare(struct drm_encoder *encoder)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+
+	/* Make sure the panel is off before trying to change the mode. But also
+	 * ensure that we have vdd while we switch off the panel. */
+	ironlake_edp_panel_vdd_on(intel_dp);
+	ironlake_edp_backlight_off(intel_dp);
+	ironlake_edp_panel_off(intel_dp);
+
+	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+	intel_dp_link_down(intel_dp);
+	ironlake_edp_panel_vdd_off(intel_dp, false);
+}
+
+static void intel_dp_commit(struct drm_encoder *encoder)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+	struct drm_device *dev = encoder->dev;
+	struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+
+	ironlake_edp_panel_vdd_on(intel_dp);
+	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+	intel_dp_start_link_train(intel_dp);
+	ironlake_edp_panel_on(intel_dp);
+	ironlake_edp_panel_vdd_off(intel_dp, true);
+	intel_dp_complete_link_train(intel_dp);
+	ironlake_edp_backlight_on(intel_dp);
+
+	intel_dp->dpms_mode = DRM_MODE_DPMS_ON;
+
+	if (HAS_PCH_CPT(dev))
+		intel_cpt_verify_modeset(dev, intel_crtc->pipe);
+}
+
+static void
+intel_dp_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dp_reg = I915_READ(intel_dp->output_reg);
+
+	if (mode != DRM_MODE_DPMS_ON) {
+		/* Switching the panel off requires vdd. */
+		ironlake_edp_panel_vdd_on(intel_dp);
+		ironlake_edp_backlight_off(intel_dp);
+		ironlake_edp_panel_off(intel_dp);
+
+		intel_dp_sink_dpms(intel_dp, mode);
+		intel_dp_link_down(intel_dp);
+		ironlake_edp_panel_vdd_off(intel_dp, false);
+
+		if (is_cpu_edp(intel_dp))
+			ironlake_edp_pll_off(encoder);
+	} else {
+		if (is_cpu_edp(intel_dp))
+			ironlake_edp_pll_on(encoder);
+
+		ironlake_edp_panel_vdd_on(intel_dp);
+		intel_dp_sink_dpms(intel_dp, mode);
+		if (!(dp_reg & DP_PORT_EN)) {
+			intel_dp_start_link_train(intel_dp);
+			ironlake_edp_panel_on(intel_dp);
+			ironlake_edp_panel_vdd_off(intel_dp, true);
+			intel_dp_complete_link_train(intel_dp);
+		} else
+			ironlake_edp_panel_vdd_off(intel_dp, false);
+		ironlake_edp_backlight_on(intel_dp);
+	}
+	intel_dp->dpms_mode = mode;
+}
+
+/*
+ * Native read with retry for link status and receiver capability reads for
+ * cases where the sink may still be asleep.
+ */
+static bool
+intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address,
+			       uint8_t *recv, int recv_bytes)
+{
+	int ret, i;
+
+	/*
+	 * Sinks are *supposed* to come up within 1ms from an off state,
+	 * but we're also supposed to retry 3 times per the spec.
+	 */
+	for (i = 0; i < 3; i++) {
+		ret = intel_dp_aux_native_read(intel_dp, address, recv,
+					       recv_bytes);
+		if (ret == recv_bytes)
+			return true;
+		msleep(1);
+	}
+
+	return false;
+}
+
+/*
+ * Fetch AUX CH registers 0x202 - 0x207 which contain
+ * link status information
+ */
+static bool
+intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
+{
+	return intel_dp_aux_native_read_retry(intel_dp,
+					      DP_LANE0_1_STATUS,
+					      link_status,
+					      DP_LINK_STATUS_SIZE);
+}
+
+static uint8_t
+intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+		     int r)
+{
+	return link_status[r - DP_LANE0_1_STATUS];
+}
+
+static uint8_t
+intel_get_adjust_request_voltage(uint8_t adjust_request[2],
+				 int lane)
+{
+	int	    s = ((lane & 1) ?
+			 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
+			 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
+	uint8_t l = adjust_request[lane>>1];
+
+	return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
+}
+
+static uint8_t
+intel_get_adjust_request_pre_emphasis(uint8_t adjust_request[2],
+				      int lane)
+{
+	int	    s = ((lane & 1) ?
+			 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
+			 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
+	uint8_t l = adjust_request[lane>>1];
+
+	return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
+}
+
+
+#if 0
+static char	*voltage_names[] = {
+	"0.4V", "0.6V", "0.8V", "1.2V"
+};
+static char	*pre_emph_names[] = {
+	"0dB", "3.5dB", "6dB", "9.5dB"
+};
+static char	*link_train_names[] = {
+	"pattern 1", "pattern 2", "idle", "off"
+};
+#endif
+
+/*
+ * These are source-specific values; current Intel hardware supports
+ * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
+ */
+
+static uint8_t
+intel_dp_voltage_max(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+
+	if (IS_GEN7(dev) && is_cpu_edp(intel_dp))
+		return DP_TRAIN_VOLTAGE_SWING_800;
+	else if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+		return DP_TRAIN_VOLTAGE_SWING_1200;
+	else
+		return DP_TRAIN_VOLTAGE_SWING_800;
+}
+
+static uint8_t
+intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+
+	if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+		switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+		case DP_TRAIN_VOLTAGE_SWING_400:
+			return DP_TRAIN_PRE_EMPHASIS_6;
+		case DP_TRAIN_VOLTAGE_SWING_600:
+		case DP_TRAIN_VOLTAGE_SWING_800:
+			return DP_TRAIN_PRE_EMPHASIS_3_5;
+		default:
+			return DP_TRAIN_PRE_EMPHASIS_0;
+		}
+	} else {
+		switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+		case DP_TRAIN_VOLTAGE_SWING_400:
+			return DP_TRAIN_PRE_EMPHASIS_6;
+		case DP_TRAIN_VOLTAGE_SWING_600:
+			return DP_TRAIN_PRE_EMPHASIS_6;
+		case DP_TRAIN_VOLTAGE_SWING_800:
+			return DP_TRAIN_PRE_EMPHASIS_3_5;
+		case DP_TRAIN_VOLTAGE_SWING_1200:
+		default:
+			return DP_TRAIN_PRE_EMPHASIS_0;
+		}
+	}
+}
+
+static void
+intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
+{
+	uint8_t v = 0;
+	uint8_t p = 0;
+	int lane;
+	uint8_t	*adjust_request = link_status + (DP_ADJUST_REQUEST_LANE0_1 - DP_LANE0_1_STATUS);
+	uint8_t voltage_max;
+	uint8_t preemph_max;
+
+	for (lane = 0; lane < intel_dp->lane_count; lane++) {
+		uint8_t this_v = intel_get_adjust_request_voltage(adjust_request, lane);
+		uint8_t this_p = intel_get_adjust_request_pre_emphasis(adjust_request, lane);
+
+		if (this_v > v)
+			v = this_v;
+		if (this_p > p)
+			p = this_p;
+	}
+
+	voltage_max = intel_dp_voltage_max(intel_dp);
+	if (v >= voltage_max)
+		v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
+
+	preemph_max = intel_dp_pre_emphasis_max(intel_dp, v);
+	if (p >= preemph_max)
+		p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+	for (lane = 0; lane < 4; lane++)
+		intel_dp->train_set[lane] = v | p;
+}
+
+static uint32_t
+intel_dp_signal_levels(uint8_t train_set)
+{
+	uint32_t	signal_levels = 0;
+
+	switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
+	case DP_TRAIN_VOLTAGE_SWING_400:
+	default:
+		signal_levels |= DP_VOLTAGE_0_4;
+		break;
+	case DP_TRAIN_VOLTAGE_SWING_600:
+		signal_levels |= DP_VOLTAGE_0_6;
+		break;
+	case DP_TRAIN_VOLTAGE_SWING_800:
+		signal_levels |= DP_VOLTAGE_0_8;
+		break;
+	case DP_TRAIN_VOLTAGE_SWING_1200:
+		signal_levels |= DP_VOLTAGE_1_2;
+		break;
+	}
+	switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
+	case DP_TRAIN_PRE_EMPHASIS_0:
+	default:
+		signal_levels |= DP_PRE_EMPHASIS_0;
+		break;
+	case DP_TRAIN_PRE_EMPHASIS_3_5:
+		signal_levels |= DP_PRE_EMPHASIS_3_5;
+		break;
+	case DP_TRAIN_PRE_EMPHASIS_6:
+		signal_levels |= DP_PRE_EMPHASIS_6;
+		break;
+	case DP_TRAIN_PRE_EMPHASIS_9_5:
+		signal_levels |= DP_PRE_EMPHASIS_9_5;
+		break;
+	}
+	return signal_levels;
+}
+
+/* Gen6's DP voltage swing and pre-emphasis control */
+static uint32_t
+intel_gen6_edp_signal_levels(uint8_t train_set)
+{
+	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
+					 DP_TRAIN_PRE_EMPHASIS_MASK);
+	switch (signal_levels) {
+	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
+	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
+		return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
+		return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
+	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6:
+		return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
+	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
+		return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B;
+	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
+	case DP_TRAIN_VOLTAGE_SWING_1200 | DP_TRAIN_PRE_EMPHASIS_0:
+		return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B;
+	default:
+		DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
+			      "0x%x\n", signal_levels);
+		return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
+	}
+}
+
+/* Gen7's DP voltage swing and pre-emphasis control */
+static uint32_t
+intel_gen7_edp_signal_levels(uint8_t train_set)
+{
+	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
+					 DP_TRAIN_PRE_EMPHASIS_MASK);
+	switch (signal_levels) {
+	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
+		return EDP_LINK_TRAIN_400MV_0DB_IVB;
+	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
+		return EDP_LINK_TRAIN_400MV_3_5DB_IVB;
+	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
+		return EDP_LINK_TRAIN_400MV_6DB_IVB;
+
+	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
+		return EDP_LINK_TRAIN_600MV_0DB_IVB;
+	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
+		return EDP_LINK_TRAIN_600MV_3_5DB_IVB;
+
+	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
+		return EDP_LINK_TRAIN_800MV_0DB_IVB;
+	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
+		return EDP_LINK_TRAIN_800MV_3_5DB_IVB;
+
+	default:
+		DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
+			      "0x%x\n", signal_levels);
+		return EDP_LINK_TRAIN_500MV_0DB_IVB;
+	}
+}
+
+static uint8_t
+intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+		      int lane)
+{
+	int s = (lane & 1) * 4;
+	uint8_t l = link_status[lane>>1];
+
+	return (l >> s) & 0xf;
+}
+
+/* Check for clock recovery is done on all channels */
+static bool
+intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+	int lane;
+	uint8_t lane_status;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = intel_get_lane_status(link_status, lane);
+		if ((lane_status & DP_LANE_CR_DONE) == 0)
+			return false;
+	}
+	return true;
+}
+
+/* Check to see if channel eq is done on all channels */
+#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\
+			 DP_LANE_CHANNEL_EQ_DONE|\
+			 DP_LANE_SYMBOL_LOCKED)
+static bool
+intel_channel_eq_ok(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
+{
+	uint8_t lane_align;
+	uint8_t lane_status;
+	int lane;
+
+	lane_align = intel_dp_link_status(link_status,
+					  DP_LANE_ALIGN_STATUS_UPDATED);
+	if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
+		return false;
+	for (lane = 0; lane < intel_dp->lane_count; lane++) {
+		lane_status = intel_get_lane_status(link_status, lane);
+		if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
+			return false;
+	}
+	return true;
+}
+
+static bool
+intel_dp_set_link_train(struct intel_dp *intel_dp,
+			uint32_t dp_reg_value,
+			uint8_t dp_train_pat)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	I915_WRITE(intel_dp->output_reg, dp_reg_value);
+	POSTING_READ(intel_dp->output_reg);
+
+	intel_dp_aux_native_write_1(intel_dp,
+				    DP_TRAINING_PATTERN_SET,
+				    dp_train_pat);
+
+	ret = intel_dp_aux_native_write(intel_dp,
+					DP_TRAINING_LANE0_SET,
+					intel_dp->train_set,
+					intel_dp->lane_count);
+	if (ret != intel_dp->lane_count)
+		return false;
+
+	return true;
+}
+
+/* Enable corresponding port and start training pattern 1 */
+static void
+intel_dp_start_link_train(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+	int i;
+	uint8_t voltage;
+	bool clock_recovery = false;
+	int voltage_tries, loop_tries;
+	u32 reg;
+	uint32_t DP = intel_dp->DP;
+
+	/*
+	 * On CPT we have to enable the port in training pattern 1, which
+	 * will happen below in intel_dp_set_link_train.  Otherwise, enable
+	 * the port and wait for it to become active.
+	 */
+	if (!HAS_PCH_CPT(dev)) {
+		I915_WRITE(intel_dp->output_reg, intel_dp->DP);
+		POSTING_READ(intel_dp->output_reg);
+		intel_wait_for_vblank(dev, intel_crtc->pipe);
+	}
+
+	/* Write the link configuration data */
+	intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
+				  intel_dp->link_configuration,
+				  DP_LINK_CONFIGURATION_SIZE);
+
+	DP |= DP_PORT_EN;
+
+	if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
+		DP &= ~DP_LINK_TRAIN_MASK_CPT;
+	else
+		DP &= ~DP_LINK_TRAIN_MASK;
+	memset(intel_dp->train_set, 0, 4);
+	voltage = 0xff;
+	voltage_tries = 0;
+	loop_tries = 0;
+	clock_recovery = false;
+	for (;;) {
+		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
+		uint8_t	    link_status[DP_LINK_STATUS_SIZE];
+		uint32_t    signal_levels;
+
+
+		if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
+			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
+		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
+			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
+		} else {
+			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
+			DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels);
+			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+		}
+
+		if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
+			reg = DP | DP_LINK_TRAIN_PAT_1_CPT;
+		else
+			reg = DP | DP_LINK_TRAIN_PAT_1;
+
+		if (!intel_dp_set_link_train(intel_dp, reg,
+					     DP_TRAINING_PATTERN_1 |
+					     DP_LINK_SCRAMBLING_DISABLE))
+			break;
+		/* Set training pattern 1 */
+
+		udelay(100);
+		if (!intel_dp_get_link_status(intel_dp, link_status)) {
+			DRM_ERROR("failed to get link status\n");
+			break;
+		}
+
+		if (intel_clock_recovery_ok(link_status, intel_dp->lane_count)) {
+			DRM_DEBUG_KMS("clock recovery OK\n");
+			clock_recovery = true;
+			break;
+		}
+
+		/* Check to see if we've tried the max voltage */
+		for (i = 0; i < intel_dp->lane_count; i++)
+			if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
+				break;
+		if (i == intel_dp->lane_count) {
+			++loop_tries;
+			if (loop_tries == 5) {
+				DRM_DEBUG_KMS("too many full retries, give up\n");
+				break;
+			}
+			memset(intel_dp->train_set, 0, 4);
+			voltage_tries = 0;
+			continue;
+		}
+
+		/* Check to see if we've tried the same voltage 5 times */
+		if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+			++voltage_tries;
+			if (voltage_tries == 5) {
+				DRM_DEBUG_KMS("too many voltage retries, give up\n");
+				break;
+			}
+		} else
+			voltage_tries = 0;
+		voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+
+		/* Compute new intel_dp->train_set as requested by target */
+		intel_get_adjust_train(intel_dp, link_status);
+	}
+
+	intel_dp->DP = DP;
+}
+
+static void
+intel_dp_complete_link_train(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	bool channel_eq = false;
+	int tries, cr_tries;
+	u32 reg;
+	uint32_t DP = intel_dp->DP;
+
+	/* channel equalization */
+	tries = 0;
+	cr_tries = 0;
+	channel_eq = false;
+	for (;;) {
+		/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
+		uint32_t    signal_levels;
+		uint8_t	    link_status[DP_LINK_STATUS_SIZE];
+
+		if (cr_tries > 5) {
+			DRM_ERROR("failed to train DP, aborting\n");
+			intel_dp_link_down(intel_dp);
+			break;
+		}
+
+		if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
+			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
+		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
+			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
+		} else {
+			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
+			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+		}
+
+		if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
+			reg = DP | DP_LINK_TRAIN_PAT_2_CPT;
+		else
+			reg = DP | DP_LINK_TRAIN_PAT_2;
+
+		/* channel eq pattern */
+		if (!intel_dp_set_link_train(intel_dp, reg,
+					     DP_TRAINING_PATTERN_2 |
+					     DP_LINK_SCRAMBLING_DISABLE))
+			break;
+
+		udelay(400);
+		if (!intel_dp_get_link_status(intel_dp, link_status))
+			break;
+
+		/* Make sure clock is still ok */
+		if (!intel_clock_recovery_ok(link_status, intel_dp->lane_count)) {
+			intel_dp_start_link_train(intel_dp);
+			cr_tries++;
+			continue;
+		}
+
+		if (intel_channel_eq_ok(intel_dp, link_status)) {
+			channel_eq = true;
+			break;
+		}
+
+		/* Try 5 times, then try clock recovery if that fails */
+		if (tries > 5) {
+			intel_dp_link_down(intel_dp);
+			intel_dp_start_link_train(intel_dp);
+			tries = 0;
+			cr_tries++;
+			continue;
+		}
+
+		/* Compute new intel_dp->train_set as requested by target */
+		intel_get_adjust_train(intel_dp, link_status);
+		++tries;
+	}
+
+	if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
+		reg = DP | DP_LINK_TRAIN_OFF_CPT;
+	else
+		reg = DP | DP_LINK_TRAIN_OFF;
+
+	I915_WRITE(intel_dp->output_reg, reg);
+	POSTING_READ(intel_dp->output_reg);
+	intel_dp_aux_native_write_1(intel_dp,
+				    DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
+}
+
+static void
+intel_dp_link_down(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t DP = intel_dp->DP;
+
+	if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)
+		return;
+
+	DRM_DEBUG_KMS("\n");
+
+	if (is_edp(intel_dp)) {
+		DP &= ~DP_PLL_ENABLE;
+		I915_WRITE(intel_dp->output_reg, DP);
+		POSTING_READ(intel_dp->output_reg);
+		udelay(100);
+	}
+
+	if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) {
+		DP &= ~DP_LINK_TRAIN_MASK_CPT;
+		I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT);
+	} else {
+		DP &= ~DP_LINK_TRAIN_MASK;
+		I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE);
+	}
+	POSTING_READ(intel_dp->output_reg);
+
+	msleep(17);
+
+	if (is_edp(intel_dp)) {
+		if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
+			DP |= DP_LINK_TRAIN_OFF_CPT;
+		else
+			DP |= DP_LINK_TRAIN_OFF;
+	}
+
+	if (!HAS_PCH_CPT(dev) &&
+	    I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
+		struct drm_crtc *crtc = intel_dp->base.base.crtc;
+
+		/* Hardware workaround: leaving our transcoder select
+		 * set to transcoder B while it's off will prevent the
+		 * corresponding HDMI output on transcoder A.
+		 *
+		 * Combine this with another hardware workaround:
+		 * transcoder select bit can only be cleared while the
+		 * port is enabled.
+		 */
+		DP &= ~DP_PIPEB_SELECT;
+		I915_WRITE(intel_dp->output_reg, DP);
+
+		/* Changes to enable or select take place the vblank
+		 * after being written.
+		 */
+		if (crtc == NULL) {
+			/* We can arrive here never having been attached
+			 * to a CRTC, for instance, due to inheriting
+			 * random state from the BIOS.
+			 *
+			 * If the pipe is not running, play safe and
+			 * wait for the clocks to stabilise before
+			 * continuing.
+			 */
+			POSTING_READ(intel_dp->output_reg);
+			msleep(50);
+		} else
+			intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe);
+	}
+
+	DP &= ~DP_AUDIO_OUTPUT_ENABLE;
+	I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
+	POSTING_READ(intel_dp->output_reg);
+	msleep(intel_dp->panel_power_down_delay);
+}
+
+static bool
+intel_dp_get_dpcd(struct intel_dp *intel_dp)
+{
+	if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
+					   sizeof(intel_dp->dpcd)) &&
+	    (intel_dp->dpcd[DP_DPCD_REV] != 0)) {
+		return true;
+	}
+
+	return false;
+}
+
+static bool
+intel_dp_get_sink_irq(struct intel_dp *intel_dp, u8 *sink_irq_vector)
+{
+	int ret;
+
+	ret = intel_dp_aux_native_read_retry(intel_dp,
+					     DP_DEVICE_SERVICE_IRQ_VECTOR,
+					     sink_irq_vector, 1);
+	if (!ret)
+		return false;
+
+	return true;
+}
+
+static void
+intel_dp_handle_test_request(struct intel_dp *intel_dp)
+{
+	/* NAK by default */
+	intel_dp_aux_native_write_1(intel_dp, DP_TEST_RESPONSE, DP_TEST_ACK);
+}
+
+/*
+ * According to DP spec
+ * 5.1.2:
+ *  1. Read DPCD
+ *  2. Configure link according to Receiver Capabilities
+ *  3. Use Link Training from 2.5.3.3 and 3.5.1.3
+ *  4. Check link status on receipt of hot-plug interrupt
+ */
+
+static void
+intel_dp_check_link_status(struct intel_dp *intel_dp)
+{
+	u8 sink_irq_vector;
+	u8 link_status[DP_LINK_STATUS_SIZE];
+
+	if (intel_dp->dpms_mode != DRM_MODE_DPMS_ON)
+		return;
+
+	if (!intel_dp->base.base.crtc)
+		return;
+
+	/* Try to read receiver status if the link appears to be up */
+	if (!intel_dp_get_link_status(intel_dp, link_status)) {
+		intel_dp_link_down(intel_dp);
+		return;
+	}
+
+	/* Now read the DPCD to see if it's actually running */
+	if (!intel_dp_get_dpcd(intel_dp)) {
+		intel_dp_link_down(intel_dp);
+		return;
+	}
+
+	/* Try to read the source of the interrupt */
+	if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
+	    intel_dp_get_sink_irq(intel_dp, &sink_irq_vector)) {
+		/* Clear interrupt source */
+		intel_dp_aux_native_write_1(intel_dp,
+					    DP_DEVICE_SERVICE_IRQ_VECTOR,
+					    sink_irq_vector);
+
+		if (sink_irq_vector & DP_AUTOMATED_TEST_REQUEST)
+			intel_dp_handle_test_request(intel_dp);
+		if (sink_irq_vector & (DP_CP_IRQ | DP_SINK_SPECIFIC_IRQ))
+			DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
+	}
+
+	if (!intel_channel_eq_ok(intel_dp, link_status)) {
+		DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
+			      drm_get_encoder_name(&intel_dp->base.base));
+		intel_dp_start_link_train(intel_dp);
+		intel_dp_complete_link_train(intel_dp);
+	}
+}
+
+static enum drm_connector_status
+intel_dp_detect_dpcd(struct intel_dp *intel_dp)
+{
+	if (intel_dp_get_dpcd(intel_dp))
+		return connector_status_connected;
+	return connector_status_disconnected;
+}
+
+static enum drm_connector_status
+ironlake_dp_detect(struct intel_dp *intel_dp)
+{
+	enum drm_connector_status status;
+
+	/* Can't disconnect eDP, but you can close the lid... */
+	if (is_edp(intel_dp)) {
+		status = intel_panel_detect(intel_dp->base.base.dev);
+		if (status == connector_status_unknown)
+			status = connector_status_connected;
+		return status;
+	}
+
+	return intel_dp_detect_dpcd(intel_dp);
+}
+
+static enum drm_connector_status
+g4x_dp_detect(struct intel_dp *intel_dp)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t temp, bit;
+
+	switch (intel_dp->output_reg) {
+	case DP_B:
+		bit = DPB_HOTPLUG_INT_STATUS;
+		break;
+	case DP_C:
+		bit = DPC_HOTPLUG_INT_STATUS;
+		break;
+	case DP_D:
+		bit = DPD_HOTPLUG_INT_STATUS;
+		break;
+	default:
+		return connector_status_unknown;
+	}
+
+	temp = I915_READ(PORT_HOTPLUG_STAT);
+
+	if ((temp & bit) == 0)
+		return connector_status_disconnected;
+
+	return intel_dp_detect_dpcd(intel_dp);
+}
+
+static struct edid *
+intel_dp_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
+{
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct edid	*edid;
+
+	ironlake_edp_panel_vdd_on(intel_dp);
+	edid = drm_get_edid(connector, adapter);
+	ironlake_edp_panel_vdd_off(intel_dp, false);
+	return edid;
+}
+
+static int
+intel_dp_get_edid_modes(struct drm_connector *connector, struct i2c_adapter *adapter)
+{
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	int	ret;
+
+	ironlake_edp_panel_vdd_on(intel_dp);
+	ret = intel_ddc_get_modes(connector, adapter);
+	ironlake_edp_panel_vdd_off(intel_dp, false);
+	return ret;
+}
+
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
+ *
+ * \return true if DP port is connected.
+ * \return false if DP port is disconnected.
+ */
+static enum drm_connector_status
+intel_dp_detect(struct drm_connector *connector, bool force)
+{
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct drm_device *dev = intel_dp->base.base.dev;
+	enum drm_connector_status status;
+	struct edid *edid = NULL;
+
+	intel_dp->has_audio = false;
+
+	if (HAS_PCH_SPLIT(dev))
+		status = ironlake_dp_detect(intel_dp);
+	else
+		status = g4x_dp_detect(intel_dp);
+
+	DRM_DEBUG_KMS("DPCD: %02hx%02hx%02hx%02hx%02hx%02hx%02hx%02hx\n",
+		      intel_dp->dpcd[0], intel_dp->dpcd[1], intel_dp->dpcd[2],
+		      intel_dp->dpcd[3], intel_dp->dpcd[4], intel_dp->dpcd[5],
+		      intel_dp->dpcd[6], intel_dp->dpcd[7]);
+
+	if (status != connector_status_connected)
+		return status;
+
+	if (intel_dp->force_audio != HDMI_AUDIO_AUTO) {
+		intel_dp->has_audio = (intel_dp->force_audio == HDMI_AUDIO_ON);
+	} else {
+		edid = intel_dp_get_edid(connector, &intel_dp->adapter);
+		if (edid) {
+			intel_dp->has_audio = drm_detect_monitor_audio(edid);
+			connector->display_info.raw_edid = NULL;
+			kfree(edid);
+		}
+	}
+
+	return connector_status_connected;
+}
+
+static int intel_dp_get_modes(struct drm_connector *connector)
+{
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct drm_device *dev = intel_dp->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	/* We should parse the EDID data and find out if it has an audio sink
+	 */
+
+	ret = intel_dp_get_edid_modes(connector, &intel_dp->adapter);
+	if (ret) {
+		if (is_edp(intel_dp) && !intel_dp->panel_fixed_mode) {
+			struct drm_display_mode *newmode;
+			list_for_each_entry(newmode, &connector->probed_modes,
+					    head) {
+				if ((newmode->type & DRM_MODE_TYPE_PREFERRED)) {
+					intel_dp->panel_fixed_mode =
+						drm_mode_duplicate(dev, newmode);
+					break;
+				}
+			}
+		}
+		return ret;
+	}
+
+	/* if eDP has no EDID, try to use fixed panel mode from VBT */
+	if (is_edp(intel_dp)) {
+		/* initialize panel mode from VBT if available for eDP */
+		if (intel_dp->panel_fixed_mode == NULL && dev_priv->lfp_lvds_vbt_mode != NULL) {
+			intel_dp->panel_fixed_mode =
+				drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+			if (intel_dp->panel_fixed_mode) {
+				intel_dp->panel_fixed_mode->type |=
+					DRM_MODE_TYPE_PREFERRED;
+			}
+		}
+		if (intel_dp->panel_fixed_mode) {
+			struct drm_display_mode *mode;
+			mode = drm_mode_duplicate(dev, intel_dp->panel_fixed_mode);
+			drm_mode_probed_add(connector, mode);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static bool
+intel_dp_detect_audio(struct drm_connector *connector)
+{
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct edid *edid;
+	bool has_audio = false;
+
+	edid = intel_dp_get_edid(connector, &intel_dp->adapter);
+	if (edid) {
+		has_audio = drm_detect_monitor_audio(edid);
+
+		connector->display_info.raw_edid = NULL;
+		kfree(edid);
+	}
+
+	return has_audio;
+}
+
+static int
+intel_dp_set_property(struct drm_connector *connector,
+		      struct drm_property *property,
+		      uint64_t val)
+{
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	int ret;
+
+	ret = drm_connector_property_set_value(connector, property, val);
+	if (ret)
+		return ret;
+
+	if (property == dev_priv->force_audio_property) {
+		int i = val;
+		bool has_audio;
+
+		if (i == intel_dp->force_audio)
+			return 0;
+
+		intel_dp->force_audio = i;
+
+		if (i == HDMI_AUDIO_AUTO)
+			has_audio = intel_dp_detect_audio(connector);
+		else
+			has_audio = (i == HDMI_AUDIO_ON);
+
+		if (has_audio == intel_dp->has_audio)
+			return 0;
+
+		intel_dp->has_audio = has_audio;
+		goto done;
+	}
+
+	if (property == dev_priv->broadcast_rgb_property) {
+		if (val == !!intel_dp->color_range)
+			return 0;
+
+		intel_dp->color_range = val ? DP_COLOR_RANGE_16_235 : 0;
+		goto done;
+	}
+
+	return -EINVAL;
+
+done:
+	if (intel_dp->base.base.crtc) {
+		struct drm_crtc *crtc = intel_dp->base.base.crtc;
+		drm_crtc_helper_set_mode(crtc, &crtc->mode,
+					 crtc->x, crtc->y,
+					 crtc->fb);
+	}
+
+	return 0;
+}
+
+static void
+intel_dp_destroy(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+
+	if (intel_dpd_is_edp(dev))
+		intel_panel_destroy_backlight(dev);
+
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static void intel_dp_encoder_destroy(struct drm_encoder *encoder)
+{
+	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+	i2c_del_adapter(&intel_dp->adapter);
+	drm_encoder_cleanup(encoder);
+	if (is_edp(intel_dp)) {
+		cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
+		ironlake_panel_vdd_off_sync(intel_dp);
+	}
+	kfree(intel_dp);
+}
+
+static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
+	.dpms = intel_dp_dpms,
+	.mode_fixup = intel_dp_mode_fixup,
+	.prepare = intel_dp_prepare,
+	.mode_set = intel_dp_mode_set,
+	.commit = intel_dp_commit,
+};
+
+static const struct drm_connector_funcs intel_dp_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = intel_dp_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = intel_dp_set_property,
+	.destroy = intel_dp_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
+	.get_modes = intel_dp_get_modes,
+	.mode_valid = intel_dp_mode_valid,
+	.best_encoder = intel_best_encoder,
+};
+
+static const struct drm_encoder_funcs intel_dp_enc_funcs = {
+	.destroy = intel_dp_encoder_destroy,
+};
+
+static void
+intel_dp_hot_plug(struct intel_encoder *intel_encoder)
+{
+	struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base);
+
+	intel_dp_check_link_status(intel_dp);
+}
+
+/* Return which DP Port should be selected for Transcoder DP control */
+int
+intel_trans_dp_port_sel(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_encoder *encoder;
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, head) {
+		struct intel_dp *intel_dp;
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		intel_dp = enc_to_intel_dp(encoder);
+		if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
+		    intel_dp->base.type == INTEL_OUTPUT_EDP)
+			return intel_dp->output_reg;
+	}
+
+	return -1;
+}
+
+/* check the VBT to see whether the eDP is on DP-D port */
+bool intel_dpd_is_edp(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct child_device_config *p_child;
+	int i;
+
+	if (!dev_priv->child_dev_num)
+		return false;
+
+	for (i = 0; i < dev_priv->child_dev_num; i++) {
+		p_child = dev_priv->child_dev + i;
+
+		if (p_child->dvo_port == PORT_IDPD &&
+		    p_child->device_type == DEVICE_TYPE_eDP)
+			return true;
+	}
+	return false;
+}
+
+static void
+intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector)
+{
+	intel_attach_force_audio_property(connector);
+	intel_attach_broadcast_rgb_property(connector);
+}
+
+void
+intel_dp_init(struct drm_device *dev, int output_reg)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_connector *connector;
+	struct intel_dp *intel_dp;
+	struct intel_encoder *intel_encoder;
+	struct intel_connector *intel_connector;
+	const char *name = NULL;
+	int type;
+
+	intel_dp = kzalloc(sizeof(struct intel_dp), GFP_KERNEL);
+	if (!intel_dp)
+		return;
+
+	intel_dp->output_reg = output_reg;
+	intel_dp->dpms_mode = -1;
+
+	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
+	if (!intel_connector) {
+		kfree(intel_dp);
+		return;
+	}
+	intel_encoder = &intel_dp->base;
+
+	if (HAS_PCH_SPLIT(dev) && output_reg == PCH_DP_D)
+		if (intel_dpd_is_edp(dev))
+			intel_dp->is_pch_edp = true;
+
+	if (output_reg == DP_A || is_pch_edp(intel_dp)) {
+		type = DRM_MODE_CONNECTOR_eDP;
+		intel_encoder->type = INTEL_OUTPUT_EDP;
+	} else {
+		type = DRM_MODE_CONNECTOR_DisplayPort;
+		intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
+	}
+
+	connector = &intel_connector->base;
+	drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
+	drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
+
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+	if (output_reg == DP_B || output_reg == PCH_DP_B)
+		intel_encoder->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
+	else if (output_reg == DP_C || output_reg == PCH_DP_C)
+		intel_encoder->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
+	else if (output_reg == DP_D || output_reg == PCH_DP_D)
+		intel_encoder->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
+
+	if (is_edp(intel_dp)) {
+		intel_encoder->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
+		INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
+				  ironlake_panel_vdd_work);
+	}
+
+	intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+	connector->interlace_allowed = true;
+	connector->doublescan_allowed = 0;
+
+	drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs,
+			 DRM_MODE_ENCODER_TMDS);
+	drm_encoder_helper_add(&intel_encoder->base, &intel_dp_helper_funcs);
+
+	intel_connector_attach_encoder(intel_connector, intel_encoder);
+	drm_sysfs_connector_add(connector);
+
+	/* Set up the DDC bus. */
+	switch (output_reg) {
+		case DP_A:
+			name = "DPDDC-A";
+			break;
+		case DP_B:
+		case PCH_DP_B:
+			dev_priv->hotplug_supported_mask |=
+				HDMIB_HOTPLUG_INT_STATUS;
+			name = "DPDDC-B";
+			break;
+		case DP_C:
+		case PCH_DP_C:
+			dev_priv->hotplug_supported_mask |=
+				HDMIC_HOTPLUG_INT_STATUS;
+			name = "DPDDC-C";
+			break;
+		case DP_D:
+		case PCH_DP_D:
+			dev_priv->hotplug_supported_mask |=
+				HDMID_HOTPLUG_INT_STATUS;
+			name = "DPDDC-D";
+			break;
+	}
+
+	/* Cache some DPCD data in the eDP case */
+	if (is_edp(intel_dp)) {
+		bool ret;
+		struct edp_power_seq	cur, vbt;
+		u32 pp_on, pp_off, pp_div;
+
+		pp_on = I915_READ(PCH_PP_ON_DELAYS);
+		pp_off = I915_READ(PCH_PP_OFF_DELAYS);
+		pp_div = I915_READ(PCH_PP_DIVISOR);
+
+		/* Pull timing values out of registers */
+		cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
+			PANEL_POWER_UP_DELAY_SHIFT;
+
+		cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >>
+			PANEL_LIGHT_ON_DELAY_SHIFT;
+
+		cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >>
+			PANEL_LIGHT_OFF_DELAY_SHIFT;
+
+		cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
+			PANEL_POWER_DOWN_DELAY_SHIFT;
+
+		cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
+			       PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000;
+
+		DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
+			      cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12);
+
+		vbt = dev_priv->edp.pps;
+
+		DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
+			      vbt.t1_t3, vbt.t8, vbt.t9, vbt.t10, vbt.t11_t12);
+
+#define get_delay(field)	((max(cur.field, vbt.field) + 9) / 10)
+
+		intel_dp->panel_power_up_delay = get_delay(t1_t3);
+		intel_dp->backlight_on_delay = get_delay(t8);
+		intel_dp->backlight_off_delay = get_delay(t9);
+		intel_dp->panel_power_down_delay = get_delay(t10);
+		intel_dp->panel_power_cycle_delay = get_delay(t11_t12);
+
+		DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n",
+			      intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay,
+			      intel_dp->panel_power_cycle_delay);
+
+		DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
+			      intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
+
+		ironlake_edp_panel_vdd_on(intel_dp);
+		ret = intel_dp_get_dpcd(intel_dp);
+		ironlake_edp_panel_vdd_off(intel_dp, false);
+
+		if (ret) {
+			if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
+				dev_priv->no_aux_handshake =
+					intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
+					DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
+		} else {
+			/* if this fails, presume the device is a ghost */
+			DRM_INFO("failed to retrieve link info, disabling eDP\n");
+			intel_dp_encoder_destroy(&intel_dp->base.base);
+			intel_dp_destroy(&intel_connector->base);
+			return;
+		}
+	}
+
+	intel_dp_i2c_init(intel_dp, intel_connector, name);
+
+	intel_encoder->hot_plug = intel_dp_hot_plug;
+
+	if (is_edp(intel_dp)) {
+		dev_priv->int_edp_connector = connector;
+		intel_panel_setup_backlight(dev);
+	}
+
+	intel_dp_add_properties(intel_dp, connector);
+
+	/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
+	 * 0xd.  Failure to do so will result in spurious interrupts being
+	 * generated on the port when a cable is not attached.
+	 */
+	if (IS_G4X(dev) && !IS_GM45(dev)) {
+		u32 temp = I915_READ(PEG_BAND_GAP_DATA);
+		I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
+	}
+}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
new file mode 100644
index 00000000..715afa15
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -0,0 +1,426 @@
+/*
+ * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
+ * Copyright (c) 2007-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+#ifndef __INTEL_DRV_H__
+#define __INTEL_DRV_H__
+
+#include <linux/i2c.h>
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
+
+#define _wait_for(COND, MS, W) ({ \
+	unsigned long timeout__ = jiffies + msecs_to_jiffies(MS);	\
+	int ret__ = 0;							\
+	while (!(COND)) {						\
+		if (time_after(jiffies, timeout__)) {			\
+			ret__ = -ETIMEDOUT;				\
+			break;						\
+		}							\
+		if (W && drm_can_sleep()) msleep(W);	\
+	}								\
+	ret__;								\
+})
+
+#define wait_for(COND, MS) _wait_for(COND, MS, 1)
+#define wait_for_atomic(COND, MS) _wait_for(COND, MS, 0)
+
+#define KHz(x) (1000*x)
+#define MHz(x) KHz(1000*x)
+
+/*
+ * Display related stuff
+ */
+
+/* store information about an Ixxx DVO */
+/* The i830->i865 use multiple DVOs with multiple i2cs */
+/* the i915, i945 have a single sDVO i2c bus - which is different */
+#define MAX_OUTPUTS 6
+/* maximum connectors per crtcs in the mode set */
+#define INTELFB_CONN_LIMIT 4
+
+#define INTEL_I2C_BUS_DVO 1
+#define INTEL_I2C_BUS_SDVO 2
+
+/* these are outputs from the chip - integrated only
+   external chips are via DVO or SDVO output */
+#define INTEL_OUTPUT_UNUSED 0
+#define INTEL_OUTPUT_ANALOG 1
+#define INTEL_OUTPUT_DVO 2
+#define INTEL_OUTPUT_SDVO 3
+#define INTEL_OUTPUT_LVDS 4
+#define INTEL_OUTPUT_TVOUT 5
+#define INTEL_OUTPUT_HDMI 6
+#define INTEL_OUTPUT_DISPLAYPORT 7
+#define INTEL_OUTPUT_EDP 8
+
+/* Intel Pipe Clone Bit */
+#define INTEL_HDMIB_CLONE_BIT 1
+#define INTEL_HDMIC_CLONE_BIT 2
+#define INTEL_HDMID_CLONE_BIT 3
+#define INTEL_HDMIE_CLONE_BIT 4
+#define INTEL_HDMIF_CLONE_BIT 5
+#define INTEL_SDVO_NON_TV_CLONE_BIT 6
+#define INTEL_SDVO_TV_CLONE_BIT 7
+#define INTEL_SDVO_LVDS_CLONE_BIT 8
+#define INTEL_ANALOG_CLONE_BIT 9
+#define INTEL_TV_CLONE_BIT 10
+#define INTEL_DP_B_CLONE_BIT 11
+#define INTEL_DP_C_CLONE_BIT 12
+#define INTEL_DP_D_CLONE_BIT 13
+#define INTEL_LVDS_CLONE_BIT 14
+#define INTEL_DVO_TMDS_CLONE_BIT 15
+#define INTEL_DVO_LVDS_CLONE_BIT 16
+#define INTEL_EDP_CLONE_BIT 17
+
+#define INTEL_DVO_CHIP_NONE 0
+#define INTEL_DVO_CHIP_LVDS 1
+#define INTEL_DVO_CHIP_TMDS 2
+#define INTEL_DVO_CHIP_TVOUT 4
+
+/* drm_display_mode->private_flags */
+#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
+#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
+#define INTEL_MODE_DP_FORCE_6BPC (0x10)
+/* This flag must be set by the encoder's mode_fixup if it changes the crtc
+ * timings in the mode to prevent the crtc fixup from overwriting them.
+ * Currently only lvds needs that. */
+#define INTEL_MODE_CRTC_TIMINGS_SET (0x20)
+
+static inline void
+intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
+				int multiplier)
+{
+	mode->clock *= multiplier;
+	mode->private_flags |= multiplier;
+}
+
+static inline int
+intel_mode_get_pixel_multiplier(const struct drm_display_mode *mode)
+{
+	return (mode->private_flags & INTEL_MODE_PIXEL_MULTIPLIER_MASK) >> INTEL_MODE_PIXEL_MULTIPLIER_SHIFT;
+}
+
+struct intel_framebuffer {
+	struct drm_framebuffer base;
+	struct drm_i915_gem_object *obj;
+};
+
+struct intel_fbdev {
+	struct drm_fb_helper helper;
+	struct intel_framebuffer ifb;
+	struct list_head fbdev_list;
+	struct drm_display_mode *our_mode;
+};
+
+struct intel_encoder {
+	struct drm_encoder base;
+	int type;
+	bool needs_tv_clock;
+	void (*hot_plug)(struct intel_encoder *);
+	int crtc_mask;
+	int clone_mask;
+};
+
+struct intel_connector {
+	struct drm_connector base;
+	struct intel_encoder *encoder;
+};
+
+struct intel_crtc {
+	struct drm_crtc base;
+	enum pipe pipe;
+	enum plane plane;
+	u8 lut_r[256], lut_g[256], lut_b[256];
+	int dpms_mode;
+	bool active; /* is the crtc on? independent of the dpms mode */
+	bool busy; /* is scanout buffer being updated frequently? */
+	struct timer_list idle_timer;
+	bool lowfreq_avail;
+	struct intel_overlay *overlay;
+	struct intel_unpin_work *unpin_work;
+	int fdi_lanes;
+
+	struct drm_i915_gem_object *cursor_bo;
+	uint32_t cursor_addr;
+	int16_t cursor_x, cursor_y;
+	int16_t cursor_width, cursor_height;
+	bool cursor_visible;
+	unsigned int bpp;
+
+	bool no_pll; /* tertiary pipe for IVB */
+	bool use_pll_a;
+};
+
+struct intel_plane {
+	struct drm_plane base;
+	enum pipe pipe;
+	struct drm_i915_gem_object *obj;
+	bool primary_disabled;
+	int max_downscale;
+	u32 lut_r[1024], lut_g[1024], lut_b[1024];
+	void (*update_plane)(struct drm_plane *plane,
+			     struct drm_framebuffer *fb,
+			     struct drm_i915_gem_object *obj,
+			     int crtc_x, int crtc_y,
+			     unsigned int crtc_w, unsigned int crtc_h,
+			     uint32_t x, uint32_t y,
+			     uint32_t src_w, uint32_t src_h);
+	void (*disable_plane)(struct drm_plane *plane);
+	int (*update_colorkey)(struct drm_plane *plane,
+			       struct drm_intel_sprite_colorkey *key);
+	void (*get_colorkey)(struct drm_plane *plane,
+			     struct drm_intel_sprite_colorkey *key);
+};
+
+#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
+#define to_intel_connector(x) container_of(x, struct intel_connector, base)
+#define to_intel_encoder(x) container_of(x, struct intel_encoder, base)
+#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
+#define to_intel_plane(x) container_of(x, struct intel_plane, base)
+
+#define DIP_HEADER_SIZE	5
+
+#define DIP_TYPE_AVI    0x82
+#define DIP_VERSION_AVI 0x2
+#define DIP_LEN_AVI     13
+
+#define DIP_TYPE_SPD	0x83
+#define DIP_VERSION_SPD	0x1
+#define DIP_LEN_SPD	25
+#define DIP_SPD_UNKNOWN	0
+#define DIP_SPD_DSTB	0x1
+#define DIP_SPD_DVDP	0x2
+#define DIP_SPD_DVHS	0x3
+#define DIP_SPD_HDDVR	0x4
+#define DIP_SPD_DVC	0x5
+#define DIP_SPD_DSC	0x6
+#define DIP_SPD_VCD	0x7
+#define DIP_SPD_GAME	0x8
+#define DIP_SPD_PC	0x9
+#define DIP_SPD_BD	0xa
+#define DIP_SPD_SCD	0xb
+
+struct dip_infoframe {
+	uint8_t type;		/* HB0 */
+	uint8_t ver;		/* HB1 */
+	uint8_t len;		/* HB2 - body len, not including checksum */
+	uint8_t ecc;		/* Header ECC */
+	uint8_t checksum;	/* PB0 */
+	union {
+		struct {
+			/* PB1 - Y 6:5, A 4:4, B 3:2, S 1:0 */
+			uint8_t Y_A_B_S;
+			/* PB2 - C 7:6, M 5:4, R 3:0 */
+			uint8_t C_M_R;
+			/* PB3 - ITC 7:7, EC 6:4, Q 3:2, SC 1:0 */
+			uint8_t ITC_EC_Q_SC;
+			/* PB4 - VIC 6:0 */
+			uint8_t VIC;
+			/* PB5 - PR 3:0 */
+			uint8_t PR;
+			/* PB6 to PB13 */
+			uint16_t top_bar_end;
+			uint16_t bottom_bar_start;
+			uint16_t left_bar_end;
+			uint16_t right_bar_start;
+		} avi;
+		struct {
+			uint8_t vn[8];
+			uint8_t pd[16];
+			uint8_t sdi;
+		} spd;
+		uint8_t payload[27];
+	} __attribute__ ((packed)) body;
+} __attribute__((packed));
+
+static inline struct drm_crtc *
+intel_get_crtc_for_pipe(struct drm_device *dev, int pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	return dev_priv->pipe_to_crtc_mapping[pipe];
+}
+
+static inline struct drm_crtc *
+intel_get_crtc_for_plane(struct drm_device *dev, int plane)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	return dev_priv->plane_to_crtc_mapping[plane];
+}
+
+struct intel_unpin_work {
+	struct work_struct work;
+	struct drm_device *dev;
+	struct drm_i915_gem_object *old_fb_obj;
+	struct drm_i915_gem_object *pending_flip_obj;
+	struct drm_pending_vblank_event *event;
+	int pending;
+	bool enable_stall_check;
+};
+
+struct intel_fbc_work {
+	struct delayed_work work;
+	struct drm_crtc *crtc;
+	struct drm_framebuffer *fb;
+	int interval;
+};
+
+int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);
+extern bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus);
+
+extern void intel_attach_force_audio_property(struct drm_connector *connector);
+extern void intel_attach_broadcast_rgb_property(struct drm_connector *connector);
+
+extern void intel_crt_init(struct drm_device *dev);
+extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
+void intel_dip_infoframe_csum(struct dip_infoframe *avi_if);
+extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
+extern void intel_dvo_init(struct drm_device *dev);
+extern void intel_tv_init(struct drm_device *dev);
+extern void intel_mark_busy(struct drm_device *dev,
+			    struct drm_i915_gem_object *obj);
+extern bool intel_lvds_init(struct drm_device *dev);
+extern void intel_dp_init(struct drm_device *dev, int dp_reg);
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+		 struct drm_display_mode *adjusted_mode);
+extern bool intel_dpd_is_edp(struct drm_device *dev);
+extern void intel_edp_link_config(struct intel_encoder *, int *, int *);
+extern bool intel_encoder_is_pch_edp(struct drm_encoder *encoder);
+extern int intel_plane_init(struct drm_device *dev, enum pipe pipe);
+
+/* intel_panel.c */
+extern void intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
+				   struct drm_display_mode *adjusted_mode);
+extern void intel_pch_panel_fitting(struct drm_device *dev,
+				    int fitting_mode,
+				    struct drm_display_mode *mode,
+				    struct drm_display_mode *adjusted_mode);
+extern u32 intel_panel_get_max_backlight(struct drm_device *dev);
+extern u32 intel_panel_get_backlight(struct drm_device *dev);
+extern void intel_panel_set_backlight(struct drm_device *dev, u32 level);
+extern int intel_panel_setup_backlight(struct drm_device *dev);
+extern void intel_panel_enable_backlight(struct drm_device *dev);
+extern void intel_panel_disable_backlight(struct drm_device *dev);
+extern void intel_panel_destroy_backlight(struct drm_device *dev);
+extern enum drm_connector_status intel_panel_detect(struct drm_device *dev);
+
+extern void intel_crtc_load_lut(struct drm_crtc *crtc);
+extern void intel_encoder_prepare(struct drm_encoder *encoder);
+extern void intel_encoder_commit(struct drm_encoder *encoder);
+extern void intel_encoder_destroy(struct drm_encoder *encoder);
+
+static inline struct intel_encoder *intel_attached_encoder(struct drm_connector *connector)
+{
+	return to_intel_connector(connector)->encoder;
+}
+
+extern void intel_connector_attach_encoder(struct intel_connector *connector,
+					   struct intel_encoder *encoder);
+extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
+
+extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
+						    struct drm_crtc *crtc);
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+				struct drm_file *file_priv);
+extern void intel_wait_for_vblank(struct drm_device *dev, int pipe);
+extern void intel_wait_for_pipe_off(struct drm_device *dev, int pipe);
+
+struct intel_load_detect_pipe {
+	struct drm_framebuffer *release_fb;
+	bool load_detect_temp;
+	int dpms_mode;
+};
+extern bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
+				       struct drm_connector *connector,
+				       struct drm_display_mode *mode,
+				       struct intel_load_detect_pipe *old);
+extern void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
+					   struct drm_connector *connector,
+					   struct intel_load_detect_pipe *old);
+
+extern void intelfb_restore(void);
+extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+				    u16 blue, int regno);
+extern void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+				    u16 *blue, int regno);
+extern void intel_enable_clock_gating(struct drm_device *dev);
+extern void ironlake_enable_drps(struct drm_device *dev);
+extern void ironlake_disable_drps(struct drm_device *dev);
+extern void gen6_enable_rps(struct drm_i915_private *dev_priv);
+extern void gen6_update_ring_freq(struct drm_i915_private *dev_priv);
+extern void gen6_disable_rps(struct drm_device *dev);
+extern void intel_init_emon(struct drm_device *dev);
+
+extern int intel_pin_and_fence_fb_obj(struct drm_device *dev,
+				      struct drm_i915_gem_object *obj,
+				      struct intel_ring_buffer *pipelined);
+extern void intel_unpin_fb_obj(struct drm_i915_gem_object *obj);
+
+extern int intel_framebuffer_init(struct drm_device *dev,
+				  struct intel_framebuffer *ifb,
+				  struct drm_mode_fb_cmd2 *mode_cmd,
+				  struct drm_i915_gem_object *obj);
+extern int intel_fbdev_init(struct drm_device *dev);
+extern void intel_fbdev_fini(struct drm_device *dev);
+extern void intel_fbdev_set_suspend(struct drm_device *dev, int state);
+extern void intel_prepare_page_flip(struct drm_device *dev, int plane);
+extern void intel_finish_page_flip(struct drm_device *dev, int pipe);
+extern void intel_finish_page_flip_plane(struct drm_device *dev, int plane);
+
+extern void intel_setup_overlay(struct drm_device *dev);
+extern void intel_cleanup_overlay(struct drm_device *dev);
+extern int intel_overlay_switch_off(struct intel_overlay *overlay);
+extern int intel_overlay_put_image(struct drm_device *dev, void *data,
+				   struct drm_file *file_priv);
+extern int intel_overlay_attrs(struct drm_device *dev, void *data,
+			       struct drm_file *file_priv);
+
+extern void intel_fb_output_poll_changed(struct drm_device *dev);
+extern void intel_fb_restore_mode(struct drm_device *dev);
+
+extern void assert_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
+			bool state);
+#define assert_pipe_enabled(d, p) assert_pipe(d, p, true)
+#define assert_pipe_disabled(d, p) assert_pipe(d, p, false)
+
+extern void intel_init_clock_gating(struct drm_device *dev);
+extern void intel_write_eld(struct drm_encoder *encoder,
+			    struct drm_display_mode *mode);
+extern void intel_cpt_verify_modeset(struct drm_device *dev, int pipe);
+
+/* For use by IVB LP watermark workaround in intel_sprite.c */
+extern void sandybridge_update_wm(struct drm_device *dev);
+extern void intel_update_sprite_watermarks(struct drm_device *dev, int pipe,
+					   uint32_t sprite_width,
+					   int pixel_size);
+
+extern int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
+				     struct drm_file *file_priv);
+extern int intel_sprite_get_colorkey(struct drm_device *dev, void *data,
+				     struct drm_file *file_priv);
+
+#endif /* __INTEL_DRV_H__ */
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
new file mode 100644
index 00000000..020a7d7f
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -0,0 +1,447 @@
+/*
+ * Copyright 2006 Dave Airlie <airlied@linux.ie>
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "dvo.h"
+
+#define SIL164_ADDR	0x38
+#define CH7xxx_ADDR	0x76
+#define TFP410_ADDR	0x38
+
+static const struct intel_dvo_device intel_dvo_devices[] = {
+	{
+		.type = INTEL_DVO_CHIP_TMDS,
+		.name = "sil164",
+		.dvo_reg = DVOC,
+		.slave_addr = SIL164_ADDR,
+		.dev_ops = &sil164_ops,
+	},
+	{
+		.type = INTEL_DVO_CHIP_TMDS,
+		.name = "ch7xxx",
+		.dvo_reg = DVOC,
+		.slave_addr = CH7xxx_ADDR,
+		.dev_ops = &ch7xxx_ops,
+	},
+	{
+		.type = INTEL_DVO_CHIP_LVDS,
+		.name = "ivch",
+		.dvo_reg = DVOA,
+		.slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */
+		.dev_ops = &ivch_ops,
+	},
+	{
+		.type = INTEL_DVO_CHIP_TMDS,
+		.name = "tfp410",
+		.dvo_reg = DVOC,
+		.slave_addr = TFP410_ADDR,
+		.dev_ops = &tfp410_ops,
+	},
+	{
+		.type = INTEL_DVO_CHIP_LVDS,
+		.name = "ch7017",
+		.dvo_reg = DVOC,
+		.slave_addr = 0x75,
+		.gpio = GMBUS_PORT_DPB,
+		.dev_ops = &ch7017_ops,
+	}
+};
+
+struct intel_dvo {
+	struct intel_encoder base;
+
+	struct intel_dvo_device dev;
+
+	struct drm_display_mode *panel_fixed_mode;
+	bool panel_wants_dither;
+};
+
+static struct intel_dvo *enc_to_intel_dvo(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct intel_dvo, base.base);
+}
+
+static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector)
+{
+	return container_of(intel_attached_encoder(connector),
+			    struct intel_dvo, base);
+}
+
+static void intel_dvo_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
+	u32 dvo_reg = intel_dvo->dev.dvo_reg;
+	u32 temp = I915_READ(dvo_reg);
+
+	if (mode == DRM_MODE_DPMS_ON) {
+		I915_WRITE(dvo_reg, temp | DVO_ENABLE);
+		I915_READ(dvo_reg);
+		intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, mode);
+	} else {
+		intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, mode);
+		I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
+		I915_READ(dvo_reg);
+	}
+}
+
+static int intel_dvo_mode_valid(struct drm_connector *connector,
+				struct drm_display_mode *mode)
+{
+	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
+
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	/* XXX: Validate clock range */
+
+	if (intel_dvo->panel_fixed_mode) {
+		if (mode->hdisplay > intel_dvo->panel_fixed_mode->hdisplay)
+			return MODE_PANEL;
+		if (mode->vdisplay > intel_dvo->panel_fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
+	return intel_dvo->dev.dev_ops->mode_valid(&intel_dvo->dev, mode);
+}
+
+static bool intel_dvo_mode_fixup(struct drm_encoder *encoder,
+				 struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
+
+	/* If we have timings from the BIOS for the panel, put them in
+	 * to the adjusted mode.  The CRTC will be set up for this mode,
+	 * with the panel scaling set up to source from the H/VDisplay
+	 * of the original mode.
+	 */
+	if (intel_dvo->panel_fixed_mode != NULL) {
+#define C(x) adjusted_mode->x = intel_dvo->panel_fixed_mode->x
+		C(hdisplay);
+		C(hsync_start);
+		C(hsync_end);
+		C(htotal);
+		C(vdisplay);
+		C(vsync_start);
+		C(vsync_end);
+		C(vtotal);
+		C(clock);
+#undef C
+	}
+
+	if (intel_dvo->dev.dev_ops->mode_fixup)
+		return intel_dvo->dev.dev_ops->mode_fixup(&intel_dvo->dev, mode, adjusted_mode);
+
+	return true;
+}
+
+static void intel_dvo_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
+	int pipe = intel_crtc->pipe;
+	u32 dvo_val;
+	u32 dvo_reg = intel_dvo->dev.dvo_reg, dvo_srcdim_reg;
+	int dpll_reg = DPLL(pipe);
+
+	switch (dvo_reg) {
+	case DVOA:
+	default:
+		dvo_srcdim_reg = DVOA_SRCDIM;
+		break;
+	case DVOB:
+		dvo_srcdim_reg = DVOB_SRCDIM;
+		break;
+	case DVOC:
+		dvo_srcdim_reg = DVOC_SRCDIM;
+		break;
+	}
+
+	intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev, mode, adjusted_mode);
+
+	/* Save the data order, since I don't know what it should be set to. */
+	dvo_val = I915_READ(dvo_reg) &
+		  (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG);
+	dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE |
+		   DVO_BLANK_ACTIVE_HIGH;
+
+	if (pipe == 1)
+		dvo_val |= DVO_PIPE_B_SELECT;
+	dvo_val |= DVO_PIPE_STALL;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		dvo_val |= DVO_HSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
+
+	I915_WRITE(dpll_reg, I915_READ(dpll_reg) | DPLL_DVO_HIGH_SPEED);
+
+	/*I915_WRITE(DVOB_SRCDIM,
+	  (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
+	  (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/
+	I915_WRITE(dvo_srcdim_reg,
+		   (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
+		   (adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));
+	/*I915_WRITE(DVOB, dvo_val);*/
+	I915_WRITE(dvo_reg, dvo_val);
+}
+
+/**
+ * Detect the output connection on our DVO device.
+ *
+ * Unimplemented.
+ */
+static enum drm_connector_status
+intel_dvo_detect(struct drm_connector *connector, bool force)
+{
+	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
+	return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev);
+}
+
+static int intel_dvo_get_modes(struct drm_connector *connector)
+{
+	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+
+	/* We should probably have an i2c driver get_modes function for those
+	 * devices which will have a fixed set of modes determined by the chip
+	 * (TV-out, for example), but for now with just TMDS and LVDS,
+	 * that's not the case.
+	 */
+	intel_ddc_get_modes(connector,
+			    &dev_priv->gmbus[GMBUS_PORT_DPC].adapter);
+	if (!list_empty(&connector->probed_modes))
+		return 1;
+
+	if (intel_dvo->panel_fixed_mode != NULL) {
+		struct drm_display_mode *mode;
+		mode = drm_mode_duplicate(connector->dev, intel_dvo->panel_fixed_mode);
+		if (mode) {
+			drm_mode_probed_add(connector, mode);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static void intel_dvo_destroy(struct drm_connector *connector)
+{
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = {
+	.dpms = intel_dvo_dpms,
+	.mode_fixup = intel_dvo_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.mode_set = intel_dvo_mode_set,
+	.commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_dvo_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = intel_dvo_detect,
+	.destroy = intel_dvo_destroy,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+};
+
+static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = {
+	.mode_valid = intel_dvo_mode_valid,
+	.get_modes = intel_dvo_get_modes,
+	.best_encoder = intel_best_encoder,
+};
+
+static void intel_dvo_enc_destroy(struct drm_encoder *encoder)
+{
+	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
+
+	if (intel_dvo->dev.dev_ops->destroy)
+		intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev);
+
+	kfree(intel_dvo->panel_fixed_mode);
+
+	intel_encoder_destroy(encoder);
+}
+
+static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
+	.destroy = intel_dvo_enc_destroy,
+};
+
+/**
+ * Attempts to get a fixed panel timing for LVDS (currently only the i830).
+ *
+ * Other chips with DVO LVDS will need to extend this to deal with the LVDS
+ * chip being on DVOB/C and having multiple pipes.
+ */
+static struct drm_display_mode *
+intel_dvo_get_current_mode(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
+	uint32_t dvo_val = I915_READ(intel_dvo->dev.dvo_reg);
+	struct drm_display_mode *mode = NULL;
+
+	/* If the DVO port is active, that'll be the LVDS, so we can pull out
+	 * its timings to get how the BIOS set up the panel.
+	 */
+	if (dvo_val & DVO_ENABLE) {
+		struct drm_crtc *crtc;
+		int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;
+
+		crtc = intel_get_crtc_for_pipe(dev, pipe);
+		if (crtc) {
+			mode = intel_crtc_mode_get(dev, crtc);
+			if (mode) {
+				mode->type |= DRM_MODE_TYPE_PREFERRED;
+				if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)
+					mode->flags |= DRM_MODE_FLAG_PHSYNC;
+				if (dvo_val & DVO_VSYNC_ACTIVE_HIGH)
+					mode->flags |= DRM_MODE_FLAG_PVSYNC;
+			}
+		}
+	}
+
+	return mode;
+}
+
+void intel_dvo_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_encoder *intel_encoder;
+	struct intel_dvo *intel_dvo;
+	struct intel_connector *intel_connector;
+	int i;
+	int encoder_type = DRM_MODE_ENCODER_NONE;
+
+	intel_dvo = kzalloc(sizeof(struct intel_dvo), GFP_KERNEL);
+	if (!intel_dvo)
+		return;
+
+	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
+	if (!intel_connector) {
+		kfree(intel_dvo);
+		return;
+	}
+
+	intel_encoder = &intel_dvo->base;
+	drm_encoder_init(dev, &intel_encoder->base,
+			 &intel_dvo_enc_funcs, encoder_type);
+
+	/* Now, try to find a controller */
+	for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
+		struct drm_connector *connector = &intel_connector->base;
+		const struct intel_dvo_device *dvo = &intel_dvo_devices[i];
+		struct i2c_adapter *i2c;
+		int gpio;
+
+		/* Allow the I2C driver info to specify the GPIO to be used in
+		 * special cases, but otherwise default to what's defined
+		 * in the spec.
+		 */
+		if (dvo->gpio != 0)
+			gpio = dvo->gpio;
+		else if (dvo->type == INTEL_DVO_CHIP_LVDS)
+			gpio = GMBUS_PORT_SSC;
+		else
+			gpio = GMBUS_PORT_DPB;
+
+		/* Set up the I2C bus necessary for the chip we're probing.
+		 * It appears that everything is on GPIOE except for panels
+		 * on i830 laptops, which are on GPIOB (DVOA).
+		 */
+		i2c = &dev_priv->gmbus[gpio].adapter;
+
+		intel_dvo->dev = *dvo;
+		if (!dvo->dev_ops->init(&intel_dvo->dev, i2c))
+			continue;
+
+		intel_encoder->type = INTEL_OUTPUT_DVO;
+		intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+		switch (dvo->type) {
+		case INTEL_DVO_CHIP_TMDS:
+			intel_encoder->clone_mask =
+				(1 << INTEL_DVO_TMDS_CLONE_BIT) |
+				(1 << INTEL_ANALOG_CLONE_BIT);
+			drm_connector_init(dev, connector,
+					   &intel_dvo_connector_funcs,
+					   DRM_MODE_CONNECTOR_DVII);
+			encoder_type = DRM_MODE_ENCODER_TMDS;
+			break;
+		case INTEL_DVO_CHIP_LVDS:
+			intel_encoder->clone_mask =
+				(1 << INTEL_DVO_LVDS_CLONE_BIT);
+			drm_connector_init(dev, connector,
+					   &intel_dvo_connector_funcs,
+					   DRM_MODE_CONNECTOR_LVDS);
+			encoder_type = DRM_MODE_ENCODER_LVDS;
+			break;
+		}
+
+		drm_connector_helper_add(connector,
+					 &intel_dvo_connector_helper_funcs);
+		connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+		connector->interlace_allowed = false;
+		connector->doublescan_allowed = false;
+
+		drm_encoder_helper_add(&intel_encoder->base,
+				       &intel_dvo_helper_funcs);
+
+		intel_connector_attach_encoder(intel_connector, intel_encoder);
+		if (dvo->type == INTEL_DVO_CHIP_LVDS) {
+			/* For our LVDS chipsets, we should hopefully be able
+			 * to dig the fixed panel mode out of the BIOS data.
+			 * However, it's in a different format from the BIOS
+			 * data on chipsets with integrated LVDS (stored in AIM
+			 * headers, likely), so for now, just get the current
+			 * mode being output through DVO.
+			 */
+			intel_dvo->panel_fixed_mode =
+				intel_dvo_get_current_mode(connector);
+			intel_dvo->panel_wants_dither = true;
+		}
+
+		drm_sysfs_connector_add(connector);
+		return;
+	}
+
+	drm_encoder_cleanup(&intel_encoder->base);
+	kfree(intel_dvo);
+	kfree(intel_connector);
+}
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
new file mode 100644
index 00000000..6e9ee33f
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -0,0 +1,293 @@
+/*
+ * Copyright © 2007 David Airlie
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *     David Airlie
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/vga_switcheroo.h>
+
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_fb_helper.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+static struct fb_ops intelfb_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var = drm_fb_helper_check_var,
+	.fb_set_par = drm_fb_helper_set_par,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_pan_display = drm_fb_helper_pan_display,
+	.fb_blank = drm_fb_helper_blank,
+	.fb_setcmap = drm_fb_helper_setcmap,
+	.fb_debug_enter = drm_fb_helper_debug_enter,
+	.fb_debug_leave = drm_fb_helper_debug_leave,
+};
+
+static int intelfb_create(struct intel_fbdev *ifbdev,
+			  struct drm_fb_helper_surface_size *sizes)
+{
+	struct drm_device *dev = ifbdev->helper.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct fb_info *info;
+	struct drm_framebuffer *fb;
+	struct drm_mode_fb_cmd2 mode_cmd;
+	struct drm_i915_gem_object *obj;
+	struct device *device = &dev->pdev->dev;
+	int size, ret;
+
+	/* we don't do packed 24bpp */
+	if (sizes->surface_bpp == 24)
+		sizes->surface_bpp = 32;
+
+	mode_cmd.width = sizes->surface_width;
+	mode_cmd.height = sizes->surface_height;
+
+	mode_cmd.pitches[0] = ALIGN(mode_cmd.width * ((sizes->surface_bpp + 7) /
+						      8), 64);
+	mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
+							  sizes->surface_depth);
+
+	size = mode_cmd.pitches[0] * mode_cmd.height;
+	size = ALIGN(size, PAGE_SIZE);
+	obj = i915_gem_alloc_object(dev, size);
+	if (!obj) {
+		DRM_ERROR("failed to allocate framebuffer\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	mutex_lock(&dev->struct_mutex);
+
+	/* Flush everything out, we'll be doing GTT only from now on */
+	ret = intel_pin_and_fence_fb_obj(dev, obj, false);
+	if (ret) {
+		DRM_ERROR("failed to pin fb: %d\n", ret);
+		goto out_unref;
+	}
+
+	info = framebuffer_alloc(0, device);
+	if (!info) {
+		ret = -ENOMEM;
+		goto out_unpin;
+	}
+
+	info->par = ifbdev;
+
+	ret = intel_framebuffer_init(dev, &ifbdev->ifb, &mode_cmd, obj);
+	if (ret)
+		goto out_unpin;
+
+	fb = &ifbdev->ifb.base;
+
+	ifbdev->helper.fb = fb;
+	ifbdev->helper.fbdev = info;
+
+	strcpy(info->fix.id, "inteldrmfb");
+
+	info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT;
+	info->fbops = &intelfb_ops;
+
+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (ret) {
+		ret = -ENOMEM;
+		goto out_unpin;
+	}
+	/* setup aperture base/size for vesafb takeover */
+	info->apertures = alloc_apertures(1);
+	if (!info->apertures) {
+		ret = -ENOMEM;
+		goto out_unpin;
+	}
+	info->apertures->ranges[0].base = dev->mode_config.fb_base;
+	info->apertures->ranges[0].size =
+		dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
+
+	info->fix.smem_start = dev->mode_config.fb_base + obj->gtt_offset;
+	info->fix.smem_len = size;
+
+	info->screen_base = ioremap_wc(dev->agp->base + obj->gtt_offset, size);
+	if (!info->screen_base) {
+		ret = -ENOSPC;
+		goto out_unpin;
+	}
+	info->screen_size = size;
+
+//	memset(info->screen_base, 0, size);
+
+	drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
+	drm_fb_helper_fill_var(info, &ifbdev->helper, sizes->fb_width, sizes->fb_height);
+
+	/* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */
+
+	DRM_DEBUG_KMS("allocated %dx%d fb: 0x%08x, bo %p\n",
+		      fb->width, fb->height,
+		      obj->gtt_offset, obj);
+
+
+	mutex_unlock(&dev->struct_mutex);
+	vga_switcheroo_client_fb_set(dev->pdev, info);
+	return 0;
+
+out_unpin:
+	i915_gem_object_unpin(obj);
+out_unref:
+	drm_gem_object_unreference(&obj->base);
+	mutex_unlock(&dev->struct_mutex);
+out:
+	return ret;
+}
+
+static int intel_fb_find_or_create_single(struct drm_fb_helper *helper,
+					  struct drm_fb_helper_surface_size *sizes)
+{
+	struct intel_fbdev *ifbdev = (struct intel_fbdev *)helper;
+	int new_fb = 0;
+	int ret;
+
+	if (!helper->fb) {
+		ret = intelfb_create(ifbdev, sizes);
+		if (ret)
+			return ret;
+		new_fb = 1;
+	}
+	return new_fb;
+}
+
+static struct drm_fb_helper_funcs intel_fb_helper_funcs = {
+	.gamma_set = intel_crtc_fb_gamma_set,
+	.gamma_get = intel_crtc_fb_gamma_get,
+	.fb_probe = intel_fb_find_or_create_single,
+};
+
+static void intel_fbdev_destroy(struct drm_device *dev,
+				struct intel_fbdev *ifbdev)
+{
+	struct fb_info *info;
+	struct intel_framebuffer *ifb = &ifbdev->ifb;
+
+	if (ifbdev->helper.fbdev) {
+		info = ifbdev->helper.fbdev;
+		unregister_framebuffer(info);
+		iounmap(info->screen_base);
+		if (info->cmap.len)
+			fb_dealloc_cmap(&info->cmap);
+		framebuffer_release(info);
+	}
+
+	drm_fb_helper_fini(&ifbdev->helper);
+
+	drm_framebuffer_cleanup(&ifb->base);
+	if (ifb->obj) {
+		drm_gem_object_unreference_unlocked(&ifb->obj->base);
+		ifb->obj = NULL;
+	}
+}
+
+int intel_fbdev_init(struct drm_device *dev)
+{
+	struct intel_fbdev *ifbdev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	ifbdev = kzalloc(sizeof(struct intel_fbdev), GFP_KERNEL);
+	if (!ifbdev)
+		return -ENOMEM;
+
+	dev_priv->fbdev = ifbdev;
+	ifbdev->helper.funcs = &intel_fb_helper_funcs;
+
+	ret = drm_fb_helper_init(dev, &ifbdev->helper,
+				 dev_priv->num_pipe,
+				 INTELFB_CONN_LIMIT);
+	if (ret) {
+		kfree(ifbdev);
+		return ret;
+	}
+
+	drm_fb_helper_single_add_all_connectors(&ifbdev->helper);
+	drm_fb_helper_initial_config(&ifbdev->helper, 32);
+	return 0;
+}
+
+void intel_fbdev_fini(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	if (!dev_priv->fbdev)
+		return;
+
+	intel_fbdev_destroy(dev, dev_priv->fbdev);
+	kfree(dev_priv->fbdev);
+	dev_priv->fbdev = NULL;
+}
+
+void intel_fbdev_set_suspend(struct drm_device *dev, int state)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	if (!dev_priv->fbdev)
+		return;
+
+	fb_set_suspend(dev_priv->fbdev->helper.fbdev, state);
+}
+
+MODULE_LICENSE("GPL and additional rights");
+
+void intel_fb_output_poll_changed(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	drm_fb_helper_hotplug_event(&dev_priv->fbdev->helper);
+}
+
+void intel_fb_restore_mode(struct drm_device *dev)
+{
+	int ret;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_mode_config *config = &dev->mode_config;
+	struct drm_plane *plane;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	ret = drm_fb_helper_restore_fbdev_mode(&dev_priv->fbdev->helper);
+	if (ret)
+		DRM_DEBUG("failed to restore crtc mode\n");
+
+	/* Be sure to shut off any planes that may be active */
+	list_for_each_entry(plane, &config->plane_list, head)
+		plane->funcs->disable_plane(plane);
+
+	mutex_unlock(&dev->mode_config.mutex);
+}
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
new file mode 100644
index 00000000..2d7f47b5
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -0,0 +1,573 @@
+/*
+ * Copyright 2006 Dave Airlie <airlied@linux.ie>
+ * Copyright © 2006-2009 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *	Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_edid.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+struct intel_hdmi {
+	struct intel_encoder base;
+	u32 sdvox_reg;
+	int ddc_bus;
+	uint32_t color_range;
+	bool has_hdmi_sink;
+	bool has_audio;
+	enum hdmi_force_audio force_audio;
+	void (*write_infoframe)(struct drm_encoder *encoder,
+				struct dip_infoframe *frame);
+};
+
+static struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct intel_hdmi, base.base);
+}
+
+static struct intel_hdmi *intel_attached_hdmi(struct drm_connector *connector)
+{
+	return container_of(intel_attached_encoder(connector),
+			    struct intel_hdmi, base);
+}
+
+void intel_dip_infoframe_csum(struct dip_infoframe *frame)
+{
+	uint8_t *data = (uint8_t *)frame;
+	uint8_t sum = 0;
+	unsigned i;
+
+	frame->checksum = 0;
+	frame->ecc = 0;
+
+	for (i = 0; i < frame->len + DIP_HEADER_SIZE; i++)
+		sum += data[i];
+
+	frame->checksum = 0x100 - sum;
+}
+
+static u32 intel_infoframe_index(struct dip_infoframe *frame)
+{
+	u32 flags = 0;
+
+	switch (frame->type) {
+	case DIP_TYPE_AVI:
+		flags |= VIDEO_DIP_SELECT_AVI;
+		break;
+	case DIP_TYPE_SPD:
+		flags |= VIDEO_DIP_SELECT_SPD;
+		break;
+	default:
+		DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type);
+		break;
+	}
+
+	return flags;
+}
+
+static u32 intel_infoframe_flags(struct dip_infoframe *frame)
+{
+	u32 flags = 0;
+
+	switch (frame->type) {
+	case DIP_TYPE_AVI:
+		flags |= VIDEO_DIP_ENABLE_AVI | VIDEO_DIP_FREQ_VSYNC;
+		break;
+	case DIP_TYPE_SPD:
+		flags |= VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_FREQ_VSYNC;
+		break;
+	default:
+		DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type);
+		break;
+	}
+
+	return flags;
+}
+
+static void i9xx_write_infoframe(struct drm_encoder *encoder,
+				 struct dip_infoframe *frame)
+{
+	uint32_t *data = (uint32_t *)frame;
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	u32 port, flags, val = I915_READ(VIDEO_DIP_CTL);
+	unsigned i, len = DIP_HEADER_SIZE + frame->len;
+
+
+	/* XXX first guess at handling video port, is this corrent? */
+	if (intel_hdmi->sdvox_reg == SDVOB)
+		port = VIDEO_DIP_PORT_B;
+	else if (intel_hdmi->sdvox_reg == SDVOC)
+		port = VIDEO_DIP_PORT_C;
+	else
+		return;
+
+	flags = intel_infoframe_index(frame);
+
+	val &= ~VIDEO_DIP_SELECT_MASK;
+
+	I915_WRITE(VIDEO_DIP_CTL, VIDEO_DIP_ENABLE | val | port | flags);
+
+	for (i = 0; i < len; i += 4) {
+		I915_WRITE(VIDEO_DIP_DATA, *data);
+		data++;
+	}
+
+	flags |= intel_infoframe_flags(frame);
+
+	I915_WRITE(VIDEO_DIP_CTL, VIDEO_DIP_ENABLE | val | port | flags);
+}
+
+static void ironlake_write_infoframe(struct drm_encoder *encoder,
+				     struct dip_infoframe *frame)
+{
+	uint32_t *data = (uint32_t *)frame;
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
+	unsigned i, len = DIP_HEADER_SIZE + frame->len;
+	u32 flags, val = I915_READ(reg);
+
+	intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+	flags = intel_infoframe_index(frame);
+
+	val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
+
+	I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags);
+
+	for (i = 0; i < len; i += 4) {
+		I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
+		data++;
+	}
+
+	flags |= intel_infoframe_flags(frame);
+
+	I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags);
+}
+static void intel_set_infoframe(struct drm_encoder *encoder,
+				struct dip_infoframe *frame)
+{
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+
+	if (!intel_hdmi->has_hdmi_sink)
+		return;
+
+	intel_dip_infoframe_csum(frame);
+	intel_hdmi->write_infoframe(encoder, frame);
+}
+
+static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder)
+{
+	struct dip_infoframe avi_if = {
+		.type = DIP_TYPE_AVI,
+		.ver = DIP_VERSION_AVI,
+		.len = DIP_LEN_AVI,
+	};
+
+	intel_set_infoframe(encoder, &avi_if);
+}
+
+static void intel_hdmi_set_spd_infoframe(struct drm_encoder *encoder)
+{
+	struct dip_infoframe spd_if;
+
+	memset(&spd_if, 0, sizeof(spd_if));
+	spd_if.type = DIP_TYPE_SPD;
+	spd_if.ver = DIP_VERSION_SPD;
+	spd_if.len = DIP_LEN_SPD;
+	strcpy(spd_if.body.spd.vn, "Intel");
+	strcpy(spd_if.body.spd.pd, "Integrated gfx");
+	spd_if.body.spd.sdi = DIP_SPD_PC;
+
+	intel_set_infoframe(encoder, &spd_if);
+}
+
+static void intel_hdmi_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	u32 sdvox;
+
+	sdvox = SDVO_ENCODING_HDMI | SDVO_BORDER_ENABLE;
+	if (!HAS_PCH_SPLIT(dev))
+		sdvox |= intel_hdmi->color_range;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		sdvox |= SDVO_VSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		sdvox |= SDVO_HSYNC_ACTIVE_HIGH;
+
+	if (intel_crtc->bpp > 24)
+		sdvox |= COLOR_FORMAT_12bpc;
+	else
+		sdvox |= COLOR_FORMAT_8bpc;
+
+	/* Required on CPT */
+	if (intel_hdmi->has_hdmi_sink && HAS_PCH_CPT(dev))
+		sdvox |= HDMI_MODE_SELECT;
+
+	if (intel_hdmi->has_audio) {
+		DRM_DEBUG_DRIVER("Enabling HDMI audio on pipe %c\n",
+				 pipe_name(intel_crtc->pipe));
+		sdvox |= SDVO_AUDIO_ENABLE;
+		sdvox |= SDVO_NULL_PACKETS_DURING_VSYNC;
+		intel_write_eld(encoder, adjusted_mode);
+	}
+
+	if (HAS_PCH_CPT(dev))
+		sdvox |= PORT_TRANS_SEL_CPT(intel_crtc->pipe);
+	else if (intel_crtc->pipe == 1)
+		sdvox |= SDVO_PIPE_B_SELECT;
+
+	I915_WRITE(intel_hdmi->sdvox_reg, sdvox);
+	POSTING_READ(intel_hdmi->sdvox_reg);
+
+	intel_hdmi_set_avi_infoframe(encoder);
+	intel_hdmi_set_spd_infoframe(encoder);
+}
+
+static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+	u32 temp;
+	u32 enable_bits = SDVO_ENABLE;
+
+	if (intel_hdmi->has_audio)
+		enable_bits |= SDVO_AUDIO_ENABLE;
+
+	temp = I915_READ(intel_hdmi->sdvox_reg);
+
+	/* HW workaround, need to toggle enable bit off and on for 12bpc, but
+	 * we do this anyway which shows more stable in testing.
+	 */
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(intel_hdmi->sdvox_reg, temp & ~SDVO_ENABLE);
+		POSTING_READ(intel_hdmi->sdvox_reg);
+	}
+
+	if (mode != DRM_MODE_DPMS_ON) {
+		temp &= ~enable_bits;
+	} else {
+		temp |= enable_bits;
+	}
+
+	I915_WRITE(intel_hdmi->sdvox_reg, temp);
+	POSTING_READ(intel_hdmi->sdvox_reg);
+
+	/* HW workaround, need to write this twice for issue that may result
+	 * in first write getting masked.
+	 */
+	if (HAS_PCH_SPLIT(dev)) {
+		I915_WRITE(intel_hdmi->sdvox_reg, temp);
+		POSTING_READ(intel_hdmi->sdvox_reg);
+	}
+}
+
+static int intel_hdmi_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	if (mode->clock > 165000)
+		return MODE_CLOCK_HIGH;
+	if (mode->clock < 20000)
+		return MODE_CLOCK_LOW;
+
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	return MODE_OK;
+}
+
+static bool intel_hdmi_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static enum drm_connector_status
+intel_hdmi_detect(struct drm_connector *connector, bool force)
+{
+	struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	struct edid *edid;
+	enum drm_connector_status status = connector_status_disconnected;
+
+	intel_hdmi->has_hdmi_sink = false;
+	intel_hdmi->has_audio = false;
+	edid = drm_get_edid(connector,
+			    &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
+
+	if (edid) {
+		if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+			status = connector_status_connected;
+			if (intel_hdmi->force_audio != HDMI_AUDIO_OFF_DVI)
+				intel_hdmi->has_hdmi_sink =
+						drm_detect_hdmi_monitor(edid);
+			intel_hdmi->has_audio = drm_detect_monitor_audio(edid);
+		}
+		connector->display_info.raw_edid = NULL;
+		kfree(edid);
+	}
+
+	if (status == connector_status_connected) {
+		if (intel_hdmi->force_audio != HDMI_AUDIO_AUTO)
+			intel_hdmi->has_audio =
+				(intel_hdmi->force_audio == HDMI_AUDIO_ON);
+	}
+
+	return status;
+}
+
+static int intel_hdmi_get_modes(struct drm_connector *connector)
+{
+	struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+
+	/* We should parse the EDID data and find out if it's an HDMI sink so
+	 * we can send audio to it.
+	 */
+
+	return intel_ddc_get_modes(connector,
+				   &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
+}
+
+static bool
+intel_hdmi_detect_audio(struct drm_connector *connector)
+{
+	struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	struct edid *edid;
+	bool has_audio = false;
+
+	edid = drm_get_edid(connector,
+			    &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
+	if (edid) {
+		if (edid->input & DRM_EDID_INPUT_DIGITAL)
+			has_audio = drm_detect_monitor_audio(edid);
+
+		connector->display_info.raw_edid = NULL;
+		kfree(edid);
+	}
+
+	return has_audio;
+}
+
+static int
+intel_hdmi_set_property(struct drm_connector *connector,
+		      struct drm_property *property,
+		      uint64_t val)
+{
+	struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	int ret;
+
+	ret = drm_connector_property_set_value(connector, property, val);
+	if (ret)
+		return ret;
+
+	if (property == dev_priv->force_audio_property) {
+		enum hdmi_force_audio i = val;
+		bool has_audio;
+
+		if (i == intel_hdmi->force_audio)
+			return 0;
+
+		intel_hdmi->force_audio = i;
+
+		if (i == HDMI_AUDIO_AUTO)
+			has_audio = intel_hdmi_detect_audio(connector);
+		else
+			has_audio = (i == HDMI_AUDIO_ON);
+
+		if (i == HDMI_AUDIO_OFF_DVI)
+			intel_hdmi->has_hdmi_sink = 0;
+
+		intel_hdmi->has_audio = has_audio;
+		goto done;
+	}
+
+	if (property == dev_priv->broadcast_rgb_property) {
+		if (val == !!intel_hdmi->color_range)
+			return 0;
+
+		intel_hdmi->color_range = val ? SDVO_COLOR_RANGE_16_235 : 0;
+		goto done;
+	}
+
+	return -EINVAL;
+
+done:
+	if (intel_hdmi->base.base.crtc) {
+		struct drm_crtc *crtc = intel_hdmi->base.base.crtc;
+		drm_crtc_helper_set_mode(crtc, &crtc->mode,
+					 crtc->x, crtc->y,
+					 crtc->fb);
+	}
+
+	return 0;
+}
+
+static void intel_hdmi_destroy(struct drm_connector *connector)
+{
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs = {
+	.dpms = intel_hdmi_dpms,
+	.mode_fixup = intel_hdmi_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.mode_set = intel_hdmi_mode_set,
+	.commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = intel_hdmi_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = intel_hdmi_set_property,
+	.destroy = intel_hdmi_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_hdmi_connector_helper_funcs = {
+	.get_modes = intel_hdmi_get_modes,
+	.mode_valid = intel_hdmi_mode_valid,
+	.best_encoder = intel_best_encoder,
+};
+
+static const struct drm_encoder_funcs intel_hdmi_enc_funcs = {
+	.destroy = intel_encoder_destroy,
+};
+
+static void
+intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *connector)
+{
+	intel_attach_force_audio_property(connector);
+	intel_attach_broadcast_rgb_property(connector);
+}
+
+void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_connector *connector;
+	struct intel_encoder *intel_encoder;
+	struct intel_connector *intel_connector;
+	struct intel_hdmi *intel_hdmi;
+	int i;
+
+	intel_hdmi = kzalloc(sizeof(struct intel_hdmi), GFP_KERNEL);
+	if (!intel_hdmi)
+		return;
+
+	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
+	if (!intel_connector) {
+		kfree(intel_hdmi);
+		return;
+	}
+
+	intel_encoder = &intel_hdmi->base;
+	drm_encoder_init(dev, &intel_encoder->base, &intel_hdmi_enc_funcs,
+			 DRM_MODE_ENCODER_TMDS);
+
+	connector = &intel_connector->base;
+	drm_connector_init(dev, connector, &intel_hdmi_connector_funcs,
+			   DRM_MODE_CONNECTOR_HDMIA);
+	drm_connector_helper_add(connector, &intel_hdmi_connector_helper_funcs);
+
+	intel_encoder->type = INTEL_OUTPUT_HDMI;
+
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
+	connector->interlace_allowed = 1;
+	connector->doublescan_allowed = 0;
+	intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+
+	/* Set up the DDC bus. */
+	if (sdvox_reg == SDVOB) {
+		intel_encoder->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
+		intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
+		dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
+	} else if (sdvox_reg == SDVOC) {
+		intel_encoder->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
+		intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
+		dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
+	} else if (sdvox_reg == HDMIB) {
+		intel_encoder->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
+		intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
+		dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
+	} else if (sdvox_reg == HDMIC) {
+		intel_encoder->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
+		intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
+		dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
+	} else if (sdvox_reg == HDMID) {
+		intel_encoder->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
+		intel_hdmi->ddc_bus = GMBUS_PORT_DPD;
+		dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS;
+	}
+
+	intel_hdmi->sdvox_reg = sdvox_reg;
+
+	if (!HAS_PCH_SPLIT(dev)) {
+		intel_hdmi->write_infoframe = i9xx_write_infoframe;
+		I915_WRITE(VIDEO_DIP_CTL, 0);
+	} else {
+		intel_hdmi->write_infoframe = ironlake_write_infoframe;
+		for_each_pipe(i)
+			I915_WRITE(TVIDEO_DIP_CTL(i), 0);
+	}
+
+	drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs);
+
+	intel_hdmi_add_properties(intel_hdmi, connector);
+
+	intel_connector_attach_encoder(intel_connector, intel_encoder);
+	drm_sysfs_connector_add(connector);
+
+	/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
+	 * 0xd.  Failure to do so will result in spurious interrupts being
+	 * generated on the port when a cable is not attached.
+	 */
+	if (IS_G4X(dev) && !IS_GM45(dev)) {
+		u32 temp = I915_READ(PEG_BAND_GAP_DATA);
+		I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
+	}
+}
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
new file mode 100644
index 00000000..8fdc9570
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -0,0 +1,441 @@
+/*
+ * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
+ * Copyright © 2006-2008,2010 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *	Chris Wilson <chris@chris-wilson.co.uk>
+ */
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/export.h>
+#include "drmP.h"
+#include "drm.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+/* Intel GPIO access functions */
+
+#define I2C_RISEFALL_TIME 10
+
+static inline struct intel_gmbus *
+to_intel_gmbus(struct i2c_adapter *i2c)
+{
+	return container_of(i2c, struct intel_gmbus, adapter);
+}
+
+void
+intel_i2c_reset(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	if (HAS_PCH_SPLIT(dev))
+		I915_WRITE(PCH_GMBUS0, 0);
+	else
+		I915_WRITE(GMBUS0, 0);
+}
+
+static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable)
+{
+	u32 val;
+
+	/* When using bit bashing for I2C, this bit needs to be set to 1 */
+	if (!IS_PINEVIEW(dev_priv->dev))
+		return;
+
+	val = I915_READ(DSPCLK_GATE_D);
+	if (enable)
+		val |= DPCUNIT_CLOCK_GATE_DISABLE;
+	else
+		val &= ~DPCUNIT_CLOCK_GATE_DISABLE;
+	I915_WRITE(DSPCLK_GATE_D, val);
+}
+
+static u32 get_reserved(struct intel_gmbus *bus)
+{
+	struct drm_i915_private *dev_priv = bus->dev_priv;
+	struct drm_device *dev = dev_priv->dev;
+	u32 reserved = 0;
+
+	/* On most chips, these bits must be preserved in software. */
+	if (!IS_I830(dev) && !IS_845G(dev))
+		reserved = I915_READ_NOTRACE(bus->gpio_reg) &
+					     (GPIO_DATA_PULLUP_DISABLE |
+					      GPIO_CLOCK_PULLUP_DISABLE);
+
+	return reserved;
+}
+
+static int get_clock(void *data)
+{
+	struct intel_gmbus *bus = data;
+	struct drm_i915_private *dev_priv = bus->dev_priv;
+	u32 reserved = get_reserved(bus);
+	I915_WRITE_NOTRACE(bus->gpio_reg, reserved | GPIO_CLOCK_DIR_MASK);
+	I915_WRITE_NOTRACE(bus->gpio_reg, reserved);
+	return (I915_READ_NOTRACE(bus->gpio_reg) & GPIO_CLOCK_VAL_IN) != 0;
+}
+
+static int get_data(void *data)
+{
+	struct intel_gmbus *bus = data;
+	struct drm_i915_private *dev_priv = bus->dev_priv;
+	u32 reserved = get_reserved(bus);
+	I915_WRITE_NOTRACE(bus->gpio_reg, reserved | GPIO_DATA_DIR_MASK);
+	I915_WRITE_NOTRACE(bus->gpio_reg, reserved);
+	return (I915_READ_NOTRACE(bus->gpio_reg) & GPIO_DATA_VAL_IN) != 0;
+}
+
+static void set_clock(void *data, int state_high)
+{
+	struct intel_gmbus *bus = data;
+	struct drm_i915_private *dev_priv = bus->dev_priv;
+	u32 reserved = get_reserved(bus);
+	u32 clock_bits;
+
+	if (state_high)
+		clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;
+	else
+		clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |
+			GPIO_CLOCK_VAL_MASK;
+
+	I915_WRITE_NOTRACE(bus->gpio_reg, reserved | clock_bits);
+	POSTING_READ(bus->gpio_reg);
+}
+
+static void set_data(void *data, int state_high)
+{
+	struct intel_gmbus *bus = data;
+	struct drm_i915_private *dev_priv = bus->dev_priv;
+	u32 reserved = get_reserved(bus);
+	u32 data_bits;
+
+	if (state_high)
+		data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
+	else
+		data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |
+			GPIO_DATA_VAL_MASK;
+
+	I915_WRITE_NOTRACE(bus->gpio_reg, reserved | data_bits);
+	POSTING_READ(bus->gpio_reg);
+}
+
+static bool
+intel_gpio_setup(struct intel_gmbus *bus, u32 pin)
+{
+	struct drm_i915_private *dev_priv = bus->dev_priv;
+	static const int map_pin_to_reg[] = {
+		0,
+		GPIOB,
+		GPIOA,
+		GPIOC,
+		GPIOD,
+		GPIOE,
+		0,
+		GPIOF,
+	};
+	struct i2c_algo_bit_data *algo;
+
+	if (pin >= ARRAY_SIZE(map_pin_to_reg) || !map_pin_to_reg[pin])
+		return false;
+
+	algo = &bus->bit_algo;
+
+	bus->gpio_reg = map_pin_to_reg[pin];
+	if (HAS_PCH_SPLIT(dev_priv->dev))
+		bus->gpio_reg += PCH_GPIOA - GPIOA;
+
+	bus->adapter.algo_data = algo;
+	algo->setsda = set_data;
+	algo->setscl = set_clock;
+	algo->getsda = get_data;
+	algo->getscl = get_clock;
+	algo->udelay = I2C_RISEFALL_TIME;
+	algo->timeout = usecs_to_jiffies(2200);
+	algo->data = bus;
+
+	return true;
+}
+
+static int
+intel_i2c_quirk_xfer(struct intel_gmbus *bus,
+		     struct i2c_msg *msgs,
+		     int num)
+{
+	struct drm_i915_private *dev_priv = bus->dev_priv;
+	int ret;
+
+	intel_i2c_reset(dev_priv->dev);
+
+	intel_i2c_quirk_set(dev_priv, true);
+	set_data(bus, 1);
+	set_clock(bus, 1);
+	udelay(I2C_RISEFALL_TIME);
+
+	ret = i2c_bit_algo.master_xfer(&bus->adapter, msgs, num);
+
+	set_data(bus, 1);
+	set_clock(bus, 1);
+	intel_i2c_quirk_set(dev_priv, false);
+
+	return ret;
+}
+
+static int
+gmbus_xfer(struct i2c_adapter *adapter,
+	   struct i2c_msg *msgs,
+	   int num)
+{
+	struct intel_gmbus *bus = container_of(adapter,
+					       struct intel_gmbus,
+					       adapter);
+	struct drm_i915_private *dev_priv = bus->dev_priv;
+	int i, reg_offset, ret;
+
+	mutex_lock(&dev_priv->gmbus_mutex);
+
+	if (bus->force_bit) {
+		ret = intel_i2c_quirk_xfer(bus, msgs, num);
+		goto out;
+	}
+
+	reg_offset = HAS_PCH_SPLIT(dev_priv->dev) ? PCH_GMBUS0 - GMBUS0 : 0;
+
+	I915_WRITE(GMBUS0 + reg_offset, bus->reg0);
+
+	for (i = 0; i < num; i++) {
+		u16 len = msgs[i].len;
+		u8 *buf = msgs[i].buf;
+
+		if (msgs[i].flags & I2C_M_RD) {
+			I915_WRITE(GMBUS1 + reg_offset,
+				   GMBUS_CYCLE_WAIT |
+				   (i + 1 == num ? GMBUS_CYCLE_STOP : 0) |
+				   (len << GMBUS_BYTE_COUNT_SHIFT) |
+				   (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
+				   GMBUS_SLAVE_READ | GMBUS_SW_RDY);
+			POSTING_READ(GMBUS2+reg_offset);
+			do {
+				u32 val, loop = 0;
+
+				if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
+					goto timeout;
+				if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+					goto clear_err;
+
+				val = I915_READ(GMBUS3 + reg_offset);
+				do {
+					*buf++ = val & 0xff;
+					val >>= 8;
+				} while (--len && ++loop < 4);
+			} while (len);
+		} else {
+			u32 val, loop;
+
+			val = loop = 0;
+			do {
+				val |= *buf++ << (8 * loop);
+			} while (--len && ++loop < 4);
+
+			I915_WRITE(GMBUS3 + reg_offset, val);
+			I915_WRITE(GMBUS1 + reg_offset,
+				   GMBUS_CYCLE_WAIT |
+				   (i + 1 == num ? GMBUS_CYCLE_STOP : 0) |
+				   (msgs[i].len << GMBUS_BYTE_COUNT_SHIFT) |
+				   (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
+				   GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
+			POSTING_READ(GMBUS2+reg_offset);
+
+			while (len) {
+				if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
+					goto timeout;
+				if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+					goto clear_err;
+
+				val = loop = 0;
+				do {
+					val |= *buf++ << (8 * loop);
+				} while (--len && ++loop < 4);
+
+				I915_WRITE(GMBUS3 + reg_offset, val);
+				POSTING_READ(GMBUS2+reg_offset);
+			}
+		}
+
+		if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50))
+			goto timeout;
+		if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+			goto clear_err;
+	}
+
+	goto done;
+
+clear_err:
+	/* Toggle the Software Clear Interrupt bit. This has the effect
+	 * of resetting the GMBUS controller and so clearing the
+	 * BUS_ERROR raised by the slave's NAK.
+	 */
+	I915_WRITE(GMBUS1 + reg_offset, GMBUS_SW_CLR_INT);
+	I915_WRITE(GMBUS1 + reg_offset, 0);
+
+done:
+	/* Mark the GMBUS interface as disabled after waiting for idle.
+	 * We will re-enable it at the start of the next xfer,
+	 * till then let it sleep.
+	 */
+	if (wait_for((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0, 10))
+		DRM_INFO("GMBUS timed out waiting for idle\n");
+	I915_WRITE(GMBUS0 + reg_offset, 0);
+	ret = i;
+	goto out;
+
+timeout:
+	DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n",
+		 bus->reg0 & 0xff, bus->adapter.name);
+	I915_WRITE(GMBUS0 + reg_offset, 0);
+
+	/* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */
+	if (!bus->has_gpio) {
+		ret = -EIO;
+	} else {
+		bus->force_bit = true;
+		ret = intel_i2c_quirk_xfer(bus, msgs, num);
+	}
+out:
+	mutex_unlock(&dev_priv->gmbus_mutex);
+	return ret;
+}
+
+static u32 gmbus_func(struct i2c_adapter *adapter)
+{
+	return i2c_bit_algo.functionality(adapter) &
+		(I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+		/* I2C_FUNC_10BIT_ADDR | */
+		I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+		I2C_FUNC_SMBUS_BLOCK_PROC_CALL);
+}
+
+static const struct i2c_algorithm gmbus_algorithm = {
+	.master_xfer	= gmbus_xfer,
+	.functionality	= gmbus_func
+};
+
+/**
+ * intel_gmbus_setup - instantiate all Intel i2c GMBuses
+ * @dev: DRM device
+ */
+int intel_setup_gmbus(struct drm_device *dev)
+{
+	static const char *names[GMBUS_NUM_PORTS] = {
+		"disabled",
+		"ssc",
+		"vga",
+		"panel",
+		"dpc",
+		"dpb",
+		"reserved",
+		"dpd",
+	};
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret, i;
+
+	dev_priv->gmbus = kcalloc(GMBUS_NUM_PORTS, sizeof(struct intel_gmbus),
+				  GFP_KERNEL);
+	if (dev_priv->gmbus == NULL)
+		return -ENOMEM;
+
+	mutex_init(&dev_priv->gmbus_mutex);
+
+	for (i = 0; i < GMBUS_NUM_PORTS; i++) {
+		struct intel_gmbus *bus = &dev_priv->gmbus[i];
+
+		bus->adapter.owner = THIS_MODULE;
+		bus->adapter.class = I2C_CLASS_DDC;
+		snprintf(bus->adapter.name,
+			 sizeof(bus->adapter.name),
+			 "i915 gmbus %s",
+			 names[i]);
+
+		bus->adapter.dev.parent = &dev->pdev->dev;
+		bus->dev_priv = dev_priv;
+
+		bus->adapter.algo = &gmbus_algorithm;
+		ret = i2c_add_adapter(&bus->adapter);
+		if (ret)
+			goto err;
+
+		/* By default use a conservative clock rate */
+		bus->reg0 = i | GMBUS_RATE_100KHZ;
+
+		bus->has_gpio = intel_gpio_setup(bus, i);
+
+		/* XXX force bit banging until GMBUS is fully debugged */
+		if (bus->has_gpio)
+			bus->force_bit = true;
+	}
+
+	intel_i2c_reset(dev_priv->dev);
+
+	return 0;
+
+err:
+	while (--i) {
+		struct intel_gmbus *bus = &dev_priv->gmbus[i];
+		i2c_del_adapter(&bus->adapter);
+	}
+	kfree(dev_priv->gmbus);
+	dev_priv->gmbus = NULL;
+	return ret;
+}
+
+void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed)
+{
+	struct intel_gmbus *bus = to_intel_gmbus(adapter);
+
+	bus->reg0 = (bus->reg0 & ~(0x3 << 8)) | speed;
+}
+
+void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit)
+{
+	struct intel_gmbus *bus = to_intel_gmbus(adapter);
+
+	if (bus->has_gpio)
+		bus->force_bit = force_bit;
+}
+
+void intel_teardown_gmbus(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+
+	if (dev_priv->gmbus == NULL)
+		return;
+
+	for (i = 0; i < GMBUS_NUM_PORTS; i++) {
+		struct intel_gmbus *bus = &dev_priv->gmbus[i];
+		i2c_del_adapter(&bus->adapter);
+	}
+
+	kfree(dev_priv->gmbus);
+	dev_priv->gmbus = NULL;
+}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
new file mode 100644
index 00000000..9fadd643
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -0,0 +1,1128 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *      Dave Airlie <airlied@linux.ie>
+ *      Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <acpi/button.h>
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_edid.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include <linux/acpi.h>
+
+/* Private structure for the integrated LVDS support */
+struct intel_lvds {
+	struct intel_encoder base;
+
+	struct edid *edid;
+
+	int fitting_mode;
+	u32 pfit_control;
+	u32 pfit_pgm_ratios;
+	bool pfit_dirty;
+
+	struct drm_display_mode *fixed_mode;
+};
+
+static struct intel_lvds *to_intel_lvds(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct intel_lvds, base.base);
+}
+
+static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector)
+{
+	return container_of(intel_attached_encoder(connector),
+			    struct intel_lvds, base);
+}
+
+/**
+ * Sets the power state for the panel.
+ */
+static void intel_lvds_enable(struct intel_lvds *intel_lvds)
+{
+	struct drm_device *dev = intel_lvds->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 ctl_reg, lvds_reg, stat_reg;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		ctl_reg = PCH_PP_CONTROL;
+		lvds_reg = PCH_LVDS;
+		stat_reg = PCH_PP_STATUS;
+	} else {
+		ctl_reg = PP_CONTROL;
+		lvds_reg = LVDS;
+		stat_reg = PP_STATUS;
+	}
+
+	I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
+
+	if (intel_lvds->pfit_dirty) {
+		/*
+		 * Enable automatic panel scaling so that non-native modes
+		 * fill the screen.  The panel fitter should only be
+		 * adjusted whilst the pipe is disabled, according to
+		 * register description and PRM.
+		 */
+		DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
+			      intel_lvds->pfit_control,
+			      intel_lvds->pfit_pgm_ratios);
+
+		I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
+		I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
+		intel_lvds->pfit_dirty = false;
+	}
+
+	I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
+	POSTING_READ(lvds_reg);
+	if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000))
+		DRM_ERROR("timed out waiting for panel to power on\n");
+
+	intel_panel_enable_backlight(dev);
+}
+
+static void intel_lvds_disable(struct intel_lvds *intel_lvds)
+{
+	struct drm_device *dev = intel_lvds->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 ctl_reg, lvds_reg, stat_reg;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		ctl_reg = PCH_PP_CONTROL;
+		lvds_reg = PCH_LVDS;
+		stat_reg = PCH_PP_STATUS;
+	} else {
+		ctl_reg = PP_CONTROL;
+		lvds_reg = LVDS;
+		stat_reg = PP_STATUS;
+	}
+
+	intel_panel_disable_backlight(dev);
+
+	I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+	if (wait_for((I915_READ(stat_reg) & PP_ON) == 0, 1000))
+		DRM_ERROR("timed out waiting for panel to power off\n");
+
+	if (intel_lvds->pfit_control) {
+		I915_WRITE(PFIT_CONTROL, 0);
+		intel_lvds->pfit_dirty = true;
+	}
+
+	I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
+	POSTING_READ(lvds_reg);
+}
+
+static void intel_lvds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
+
+	if (mode == DRM_MODE_DPMS_ON)
+		intel_lvds_enable(intel_lvds);
+	else
+		intel_lvds_disable(intel_lvds);
+
+	/* XXX: We never power down the LVDS pairs. */
+}
+
+static int intel_lvds_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	struct intel_lvds *intel_lvds = intel_attached_lvds(connector);
+	struct drm_display_mode *fixed_mode = intel_lvds->fixed_mode;
+
+	if (mode->hdisplay > fixed_mode->hdisplay)
+		return MODE_PANEL;
+	if (mode->vdisplay > fixed_mode->vdisplay)
+		return MODE_PANEL;
+
+	return MODE_OK;
+}
+
+static void
+centre_horizontally(struct drm_display_mode *mode,
+		    int width)
+{
+	u32 border, sync_pos, blank_width, sync_width;
+
+	/* keep the hsync and hblank widths constant */
+	sync_width = mode->crtc_hsync_end - mode->crtc_hsync_start;
+	blank_width = mode->crtc_hblank_end - mode->crtc_hblank_start;
+	sync_pos = (blank_width - sync_width + 1) / 2;
+
+	border = (mode->hdisplay - width + 1) / 2;
+	border += border & 1; /* make the border even */
+
+	mode->crtc_hdisplay = width;
+	mode->crtc_hblank_start = width + border;
+	mode->crtc_hblank_end = mode->crtc_hblank_start + blank_width;
+
+	mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
+	mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
+
+	mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET;
+}
+
+static void
+centre_vertically(struct drm_display_mode *mode,
+		  int height)
+{
+	u32 border, sync_pos, blank_width, sync_width;
+
+	/* keep the vsync and vblank widths constant */
+	sync_width = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	blank_width = mode->crtc_vblank_end - mode->crtc_vblank_start;
+	sync_pos = (blank_width - sync_width + 1) / 2;
+
+	border = (mode->vdisplay - height + 1) / 2;
+
+	mode->crtc_vdisplay = height;
+	mode->crtc_vblank_start = height + border;
+	mode->crtc_vblank_end = mode->crtc_vblank_start + blank_width;
+
+	mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
+	mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
+
+	mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET;
+}
+
+static inline u32 panel_fitter_scaling(u32 source, u32 target)
+{
+	/*
+	 * Floating point operation is not supported. So the FACTOR
+	 * is defined, which can avoid the floating point computation
+	 * when calculating the panel ratio.
+	 */
+#define ACCURACY 12
+#define FACTOR (1 << ACCURACY)
+	u32 ratio = source * FACTOR / target;
+	return (FACTOR * ratio + FACTOR/2) / FACTOR;
+}
+
+static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
+	struct drm_encoder *tmp_encoder;
+	u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
+	int pipe;
+
+	/* Should never happen!! */
+	if (INTEL_INFO(dev)->gen < 4 && intel_crtc->pipe == 0) {
+		DRM_ERROR("Can't support LVDS on pipe A\n");
+		return false;
+	}
+
+	/* Should never happen!! */
+	list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
+		if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
+			DRM_ERROR("Can't enable LVDS and another "
+			       "encoder on the same pipe\n");
+			return false;
+		}
+	}
+
+	/*
+	 * We have timings from the BIOS for the panel, put them in
+	 * to the adjusted mode.  The CRTC will be set up for this mode,
+	 * with the panel scaling set up to source from the H/VDisplay
+	 * of the original mode.
+	 */
+	intel_fixed_panel_mode(intel_lvds->fixed_mode, adjusted_mode);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		intel_pch_panel_fitting(dev, intel_lvds->fitting_mode,
+					mode, adjusted_mode);
+		return true;
+	}
+
+	/* Native modes don't need fitting */
+	if (adjusted_mode->hdisplay == mode->hdisplay &&
+	    adjusted_mode->vdisplay == mode->vdisplay)
+		goto out;
+
+	/* 965+ wants fuzzy fitting */
+	if (INTEL_INFO(dev)->gen >= 4)
+		pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
+				 PFIT_FILTER_FUZZY);
+
+	/*
+	 * Enable automatic panel scaling for non-native modes so that they fill
+	 * the screen.  Should be enabled before the pipe is enabled, according
+	 * to register description and PRM.
+	 * Change the value here to see the borders for debugging
+	 */
+	for_each_pipe(pipe)
+		I915_WRITE(BCLRPAT(pipe), 0);
+
+	drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+	switch (intel_lvds->fitting_mode) {
+	case DRM_MODE_SCALE_CENTER:
+		/*
+		 * For centered modes, we have to calculate border widths &
+		 * heights and modify the values programmed into the CRTC.
+		 */
+		centre_horizontally(adjusted_mode, mode->hdisplay);
+		centre_vertically(adjusted_mode, mode->vdisplay);
+		border = LVDS_BORDER_ENABLE;
+		break;
+
+	case DRM_MODE_SCALE_ASPECT:
+		/* Scale but preserve the aspect ratio */
+		if (INTEL_INFO(dev)->gen >= 4) {
+			u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
+			u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
+
+			/* 965+ is easy, it does everything in hw */
+			if (scaled_width > scaled_height)
+				pfit_control |= PFIT_ENABLE | PFIT_SCALING_PILLAR;
+			else if (scaled_width < scaled_height)
+				pfit_control |= PFIT_ENABLE | PFIT_SCALING_LETTER;
+			else if (adjusted_mode->hdisplay != mode->hdisplay)
+				pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
+		} else {
+			u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
+			u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
+			/*
+			 * For earlier chips we have to calculate the scaling
+			 * ratio by hand and program it into the
+			 * PFIT_PGM_RATIO register
+			 */
+			if (scaled_width > scaled_height) { /* pillar */
+				centre_horizontally(adjusted_mode, scaled_height / mode->vdisplay);
+
+				border = LVDS_BORDER_ENABLE;
+				if (mode->vdisplay != adjusted_mode->vdisplay) {
+					u32 bits = panel_fitter_scaling(mode->vdisplay, adjusted_mode->vdisplay);
+					pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
+							    bits << PFIT_VERT_SCALE_SHIFT);
+					pfit_control |= (PFIT_ENABLE |
+							 VERT_INTERP_BILINEAR |
+							 HORIZ_INTERP_BILINEAR);
+				}
+			} else if (scaled_width < scaled_height) { /* letter */
+				centre_vertically(adjusted_mode, scaled_width / mode->hdisplay);
+
+				border = LVDS_BORDER_ENABLE;
+				if (mode->hdisplay != adjusted_mode->hdisplay) {
+					u32 bits = panel_fitter_scaling(mode->hdisplay, adjusted_mode->hdisplay);
+					pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
+							    bits << PFIT_VERT_SCALE_SHIFT);
+					pfit_control |= (PFIT_ENABLE |
+							 VERT_INTERP_BILINEAR |
+							 HORIZ_INTERP_BILINEAR);
+				}
+			} else
+				/* Aspects match, Let hw scale both directions */
+				pfit_control |= (PFIT_ENABLE |
+						 VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_INTERP_BILINEAR);
+		}
+		break;
+
+	case DRM_MODE_SCALE_FULLSCREEN:
+		/*
+		 * Full scaling, even if it changes the aspect ratio.
+		 * Fortunately this is all done for us in hw.
+		 */
+		if (mode->vdisplay != adjusted_mode->vdisplay ||
+		    mode->hdisplay != adjusted_mode->hdisplay) {
+			pfit_control |= PFIT_ENABLE;
+			if (INTEL_INFO(dev)->gen >= 4)
+				pfit_control |= PFIT_SCALING_AUTO;
+			else
+				pfit_control |= (VERT_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_AUTO_SCALE |
+						 HORIZ_INTERP_BILINEAR);
+		}
+		break;
+
+	default:
+		break;
+	}
+
+out:
+	/* If not enabling scaling, be consistent and always use 0. */
+	if ((pfit_control & PFIT_ENABLE) == 0) {
+		pfit_control = 0;
+		pfit_pgm_ratios = 0;
+	}
+
+	/* Make sure pre-965 set dither correctly */
+	if (INTEL_INFO(dev)->gen < 4 && dev_priv->lvds_dither)
+		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+
+	if (pfit_control != intel_lvds->pfit_control ||
+	    pfit_pgm_ratios != intel_lvds->pfit_pgm_ratios) {
+		intel_lvds->pfit_control = pfit_control;
+		intel_lvds->pfit_pgm_ratios = pfit_pgm_ratios;
+		intel_lvds->pfit_dirty = true;
+	}
+	dev_priv->lvds_border_bits = border;
+
+	/*
+	 * XXX: It would be nice to support lower refresh rates on the
+	 * panels to reduce power consumption, and perhaps match the
+	 * user's requested refresh rate.
+	 */
+
+	return true;
+}
+
+static void intel_lvds_prepare(struct drm_encoder *encoder)
+{
+	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
+
+	/*
+	 * Prior to Ironlake, we must disable the pipe if we want to adjust
+	 * the panel fitter. However at all other times we can just reset
+	 * the registers regardless.
+	 */
+	if (!HAS_PCH_SPLIT(encoder->dev) && intel_lvds->pfit_dirty)
+		intel_lvds_disable(intel_lvds);
+}
+
+static void intel_lvds_commit(struct drm_encoder *encoder)
+{
+	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
+
+	/* Always do a full power on as we do not know what state
+	 * we were left in.
+	 */
+	intel_lvds_enable(intel_lvds);
+}
+
+static void intel_lvds_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	/*
+	 * The LVDS pin pair will already have been turned on in the
+	 * intel_crtc_mode_set since it has a large impact on the DPLL
+	 * settings.
+	 */
+}
+
+/**
+ * Detect the LVDS connection.
+ *
+ * Since LVDS doesn't have hotlug, we use the lid as a proxy.  Open means
+ * connected and closed means disconnected.  We also send hotplug events as
+ * needed, using lid status notification from the input layer.
+ */
+static enum drm_connector_status
+intel_lvds_detect(struct drm_connector *connector, bool force)
+{
+	struct drm_device *dev = connector->dev;
+	enum drm_connector_status status;
+
+	status = intel_panel_detect(dev);
+	if (status != connector_status_unknown)
+		return status;
+
+	return connector_status_connected;
+}
+
+/**
+ * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
+ */
+static int intel_lvds_get_modes(struct drm_connector *connector)
+{
+	struct intel_lvds *intel_lvds = intel_attached_lvds(connector);
+	struct drm_device *dev = connector->dev;
+	struct drm_display_mode *mode;
+
+	if (intel_lvds->edid)
+		return drm_add_edid_modes(connector, intel_lvds->edid);
+
+	mode = drm_mode_duplicate(dev, intel_lvds->fixed_mode);
+	if (mode == NULL)
+		return 0;
+
+	drm_mode_probed_add(connector, mode);
+	return 1;
+}
+
+static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_DEBUG_KMS("Skipping forced modeset for %s\n", id->ident);
+	return 1;
+}
+
+/* The GPU hangs up on these systems if modeset is performed on LID open */
+static const struct dmi_system_id intel_no_modeset_on_lid[] = {
+	{
+		.callback = intel_no_modeset_on_lid_dmi_callback,
+		.ident = "Toshiba Tecra A11",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A11"),
+		},
+	},
+
+	{ }	/* terminating entry */
+};
+
+/*
+ * Lid events. Note the use of 'modeset_on_lid':
+ *  - we set it on lid close, and reset it on open
+ *  - we use it as a "only once" bit (ie we ignore
+ *    duplicate events where it was already properly
+ *    set/reset)
+ *  - the suspend/resume paths will also set it to
+ *    zero, since they restore the mode ("lid open").
+ */
+static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
+			    void *unused)
+{
+	struct drm_i915_private *dev_priv =
+		container_of(nb, struct drm_i915_private, lid_notifier);
+	struct drm_device *dev = dev_priv->dev;
+	struct drm_connector *connector = dev_priv->int_lvds_connector;
+
+	if (dev->switch_power_state != DRM_SWITCH_POWER_ON)
+		return NOTIFY_OK;
+
+	/*
+	 * check and update the status of LVDS connector after receiving
+	 * the LID nofication event.
+	 */
+	if (connector)
+		connector->status = connector->funcs->detect(connector,
+							     false);
+
+	/* Don't force modeset on machines where it causes a GPU lockup */
+	if (dmi_check_system(intel_no_modeset_on_lid))
+		return NOTIFY_OK;
+	if (!acpi_lid_open()) {
+		dev_priv->modeset_on_lid = 1;
+		return NOTIFY_OK;
+	}
+
+	if (!dev_priv->modeset_on_lid)
+		return NOTIFY_OK;
+
+	dev_priv->modeset_on_lid = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+	drm_helper_resume_force_mode(dev);
+	mutex_unlock(&dev->mode_config.mutex);
+
+	return NOTIFY_OK;
+}
+
+/**
+ * intel_lvds_destroy - unregister and free LVDS structures
+ * @connector: connector to free
+ *
+ * Unregister the DDC bus for this connector then free the driver private
+ * structure.
+ */
+static void intel_lvds_destroy(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	intel_panel_destroy_backlight(dev);
+
+	if (dev_priv->lid_notifier.notifier_call)
+		acpi_lid_notifier_unregister(&dev_priv->lid_notifier);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static int intel_lvds_set_property(struct drm_connector *connector,
+				   struct drm_property *property,
+				   uint64_t value)
+{
+	struct intel_lvds *intel_lvds = intel_attached_lvds(connector);
+	struct drm_device *dev = connector->dev;
+
+	if (property == dev->mode_config.scaling_mode_property) {
+		struct drm_crtc *crtc = intel_lvds->base.base.crtc;
+
+		if (value == DRM_MODE_SCALE_NONE) {
+			DRM_DEBUG_KMS("no scaling not supported\n");
+			return -EINVAL;
+		}
+
+		if (intel_lvds->fitting_mode == value) {
+			/* the LVDS scaling property is not changed */
+			return 0;
+		}
+		intel_lvds->fitting_mode = value;
+		if (crtc && crtc->enabled) {
+			/*
+			 * If the CRTC is enabled, the display will be changed
+			 * according to the new panel fitting mode.
+			 */
+			drm_crtc_helper_set_mode(crtc, &crtc->mode,
+				crtc->x, crtc->y, crtc->fb);
+		}
+	}
+
+	return 0;
+}
+
+static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
+	.dpms = intel_lvds_dpms,
+	.mode_fixup = intel_lvds_mode_fixup,
+	.prepare = intel_lvds_prepare,
+	.mode_set = intel_lvds_mode_set,
+	.commit = intel_lvds_commit,
+};
+
+static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
+	.get_modes = intel_lvds_get_modes,
+	.mode_valid = intel_lvds_mode_valid,
+	.best_encoder = intel_best_encoder,
+};
+
+static const struct drm_connector_funcs intel_lvds_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = intel_lvds_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = intel_lvds_set_property,
+	.destroy = intel_lvds_destroy,
+};
+
+static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
+	.destroy = intel_encoder_destroy,
+};
+
+static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_DEBUG_KMS("Skipping LVDS initialization for %s\n", id->ident);
+	return 1;
+}
+
+/* These systems claim to have LVDS, but really don't */
+static const struct dmi_system_id intel_no_lvds[] = {
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Apple Mac Mini (Core series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Apple Mac Mini (Core 2 series)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "MSI IM-945GSE-A",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Dell Studio Hybrid",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Dell OptiPlex FX170",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex FX170"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "AOpen Mini PC",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "AOpen"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "AOpen Mini PC MP915",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+			DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "AOpen i915GMm-HFS",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+			DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+                .ident = "AOpen i45GMx-I",
+                .matches = {
+                        DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+                        DMI_MATCH(DMI_BOARD_NAME, "i45GMx-I"),
+                },
+        },
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Aopen i945GTt-VFA",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Clientron U800",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "U800"),
+		},
+	},
+	{
+                .callback = intel_no_lvds_dmi_callback,
+                .ident = "Clientron E830",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "E830"),
+                },
+        },
+        {
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Asus EeeBox PC EB1007",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Asus AT5NM10T-I",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "AT5NM10T-I"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Hewlett-Packard HP t5740e Thin Client",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP t5740e Thin Client"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Hewlett-Packard t5745",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "hp t5745"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Hewlett-Packard st5747",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "hp st5747"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "MSI Wind Box DC500",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-7469"),
+		},
+	},
+
+	{ }	/* terminating entry */
+};
+
+/**
+ * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
+ * @dev: drm device
+ * @connector: LVDS connector
+ *
+ * Find the reduced downclock for LVDS in EDID.
+ */
+static void intel_find_lvds_downclock(struct drm_device *dev,
+				      struct drm_display_mode *fixed_mode,
+				      struct drm_connector *connector)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_display_mode *scan;
+	int temp_downclock;
+
+	temp_downclock = fixed_mode->clock;
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		/*
+		 * If one mode has the same resolution with the fixed_panel
+		 * mode while they have the different refresh rate, it means
+		 * that the reduced downclock is found for the LVDS. In such
+		 * case we can set the different FPx0/1 to dynamically select
+		 * between low and high frequency.
+		 */
+		if (scan->hdisplay == fixed_mode->hdisplay &&
+		    scan->hsync_start == fixed_mode->hsync_start &&
+		    scan->hsync_end == fixed_mode->hsync_end &&
+		    scan->htotal == fixed_mode->htotal &&
+		    scan->vdisplay == fixed_mode->vdisplay &&
+		    scan->vsync_start == fixed_mode->vsync_start &&
+		    scan->vsync_end == fixed_mode->vsync_end &&
+		    scan->vtotal == fixed_mode->vtotal) {
+			if (scan->clock < temp_downclock) {
+				/*
+				 * The downclock is already found. But we
+				 * expect to find the lower downclock.
+				 */
+				temp_downclock = scan->clock;
+			}
+		}
+	}
+	if (temp_downclock < fixed_mode->clock && i915_lvds_downclock) {
+		/* We found the downclock for LVDS. */
+		dev_priv->lvds_downclock_avail = 1;
+		dev_priv->lvds_downclock = temp_downclock;
+		DRM_DEBUG_KMS("LVDS downclock is found in EDID. "
+			      "Normal clock %dKhz, downclock %dKhz\n",
+			      fixed_mode->clock, temp_downclock);
+	}
+}
+
+/*
+ * Enumerate the child dev array parsed from VBT to check whether
+ * the LVDS is present.
+ * If it is present, return 1.
+ * If it is not present, return false.
+ * If no child dev is parsed from VBT, it assumes that the LVDS is present.
+ */
+static bool lvds_is_present_in_vbt(struct drm_device *dev,
+				   u8 *i2c_pin)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int i;
+
+	if (!dev_priv->child_dev_num)
+		return true;
+
+	for (i = 0; i < dev_priv->child_dev_num; i++) {
+		struct child_device_config *child = dev_priv->child_dev + i;
+
+		/* If the device type is not LFP, continue.
+		 * We have to check both the new identifiers as well as the
+		 * old for compatibility with some BIOSes.
+		 */
+		if (child->device_type != DEVICE_TYPE_INT_LFP &&
+		    child->device_type != DEVICE_TYPE_LFP)
+			continue;
+
+		if (child->i2c_pin)
+		    *i2c_pin = child->i2c_pin;
+
+		/* However, we cannot trust the BIOS writers to populate
+		 * the VBT correctly.  Since LVDS requires additional
+		 * information from AIM blocks, a non-zero addin offset is
+		 * a good indicator that the LVDS is actually present.
+		 */
+		if (child->addin_offset)
+			return true;
+
+		/* But even then some BIOS writers perform some black magic
+		 * and instantiate the device without reference to any
+		 * additional data.  Trust that if the VBT was written into
+		 * the OpRegion then they have validated the LVDS's existence.
+		 */
+		if (dev_priv->opregion.vbt)
+			return true;
+	}
+
+	return false;
+}
+
+static bool intel_lvds_supported(struct drm_device *dev)
+{
+	/* With the introduction of the PCH we gained a dedicated
+	 * LVDS presence pin, use it. */
+	if (HAS_PCH_SPLIT(dev))
+		return true;
+
+	/* Otherwise LVDS was only attached to mobile products,
+	 * except for the inglorious 830gm */
+	return IS_MOBILE(dev) && !IS_I830(dev);
+}
+
+/**
+ * intel_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+bool intel_lvds_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_lvds *intel_lvds;
+	struct intel_encoder *intel_encoder;
+	struct intel_connector *intel_connector;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_display_mode *scan; /* *modes, *bios_mode; */
+	struct drm_crtc *crtc;
+	u32 lvds;
+	int pipe;
+	u8 pin;
+
+	if (!intel_lvds_supported(dev))
+		return false;
+
+	/* Skip init on machines we know falsely report LVDS */
+	if (dmi_check_system(intel_no_lvds))
+		return false;
+
+	pin = GMBUS_PORT_PANEL;
+	if (!lvds_is_present_in_vbt(dev, &pin)) {
+		DRM_DEBUG_KMS("LVDS is not present in VBT\n");
+		return false;
+	}
+
+	if (HAS_PCH_SPLIT(dev)) {
+		if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
+			return false;
+		if (dev_priv->edp.support) {
+			DRM_DEBUG_KMS("disable LVDS for eDP support\n");
+			return false;
+		}
+	}
+
+	intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL);
+	if (!intel_lvds) {
+		return false;
+	}
+
+	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
+	if (!intel_connector) {
+		kfree(intel_lvds);
+		return false;
+	}
+
+	if (!HAS_PCH_SPLIT(dev)) {
+		intel_lvds->pfit_control = I915_READ(PFIT_CONTROL);
+	}
+
+	intel_encoder = &intel_lvds->base;
+	encoder = &intel_encoder->base;
+	connector = &intel_connector->base;
+	drm_connector_init(dev, &intel_connector->base, &intel_lvds_connector_funcs,
+			   DRM_MODE_CONNECTOR_LVDS);
+
+	drm_encoder_init(dev, &intel_encoder->base, &intel_lvds_enc_funcs,
+			 DRM_MODE_ENCODER_LVDS);
+
+	intel_connector_attach_encoder(intel_connector, intel_encoder);
+	intel_encoder->type = INTEL_OUTPUT_LVDS;
+
+	intel_encoder->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
+	if (HAS_PCH_SPLIT(dev))
+		intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+	else
+		intel_encoder->crtc_mask = (1 << 1);
+
+	drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
+	drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	/* create the scaling mode property */
+	drm_mode_create_scaling_mode_property(dev);
+	/*
+	 * the initial panel fitting mode will be FULL_SCREEN.
+	 */
+
+	drm_connector_attach_property(&intel_connector->base,
+				      dev->mode_config.scaling_mode_property,
+				      DRM_MODE_SCALE_ASPECT);
+	intel_lvds->fitting_mode = DRM_MODE_SCALE_ASPECT;
+	/*
+	 * LVDS discovery:
+	 * 1) check for EDID on DDC
+	 * 2) check for VBT data
+	 * 3) check to see if LVDS is already on
+	 *    if none of the above, no panel
+	 * 4) make sure lid is open
+	 *    if closed, act like it's not there for now
+	 */
+
+	/*
+	 * Attempt to get the fixed panel mode from DDC.  Assume that the
+	 * preferred mode is the right one.
+	 */
+	intel_lvds->edid = drm_get_edid(connector,
+					&dev_priv->gmbus[pin].adapter);
+	if (intel_lvds->edid) {
+		if (drm_add_edid_modes(connector,
+				       intel_lvds->edid)) {
+			drm_mode_connector_update_edid_property(connector,
+								intel_lvds->edid);
+		} else {
+			kfree(intel_lvds->edid);
+			intel_lvds->edid = NULL;
+		}
+	}
+	if (!intel_lvds->edid) {
+		/* Didn't get an EDID, so
+		 * Set wide sync ranges so we get all modes
+		 * handed to valid_mode for checking
+		 */
+		connector->display_info.min_vfreq = 0;
+		connector->display_info.max_vfreq = 200;
+		connector->display_info.min_hfreq = 0;
+		connector->display_info.max_hfreq = 200;
+	}
+
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+			intel_lvds->fixed_mode =
+				drm_mode_duplicate(dev, scan);
+			intel_find_lvds_downclock(dev,
+						  intel_lvds->fixed_mode,
+						  connector);
+			goto out;
+		}
+	}
+
+	/* Failed to get EDID, what about VBT? */
+	if (dev_priv->lfp_lvds_vbt_mode) {
+		intel_lvds->fixed_mode =
+			drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+		if (intel_lvds->fixed_mode) {
+			intel_lvds->fixed_mode->type |=
+				DRM_MODE_TYPE_PREFERRED;
+			goto out;
+		}
+	}
+
+	/*
+	 * If we didn't get EDID, try checking if the panel is already turned
+	 * on.  If so, assume that whatever is currently programmed is the
+	 * correct mode.
+	 */
+
+	/* Ironlake: FIXME if still fail, not try pipe mode now */
+	if (HAS_PCH_SPLIT(dev))
+		goto failed;
+
+	lvds = I915_READ(LVDS);
+	pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
+	crtc = intel_get_crtc_for_pipe(dev, pipe);
+
+	if (crtc && (lvds & LVDS_PORT_EN)) {
+		intel_lvds->fixed_mode = intel_crtc_mode_get(dev, crtc);
+		if (intel_lvds->fixed_mode) {
+			intel_lvds->fixed_mode->type |=
+				DRM_MODE_TYPE_PREFERRED;
+			goto out;
+		}
+	}
+
+	/* If we still don't have a mode after all that, give up. */
+	if (!intel_lvds->fixed_mode)
+		goto failed;
+
+out:
+	if (HAS_PCH_SPLIT(dev)) {
+		u32 pwm;
+
+		pipe = (I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT) ? 1 : 0;
+
+		/* make sure PWM is enabled and locked to the LVDS pipe */
+		pwm = I915_READ(BLC_PWM_CPU_CTL2);
+		if (pipe == 0 && (pwm & PWM_PIPE_B))
+			I915_WRITE(BLC_PWM_CPU_CTL2, pwm & ~PWM_ENABLE);
+		if (pipe)
+			pwm |= PWM_PIPE_B;
+		else
+			pwm &= ~PWM_PIPE_B;
+		I915_WRITE(BLC_PWM_CPU_CTL2, pwm | PWM_ENABLE);
+
+		pwm = I915_READ(BLC_PWM_PCH_CTL1);
+		pwm |= PWM_PCH_ENABLE;
+		I915_WRITE(BLC_PWM_PCH_CTL1, pwm);
+		/*
+		 * Unlock registers and just
+		 * leave them unlocked
+		 */
+		I915_WRITE(PCH_PP_CONTROL,
+			   I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
+	} else {
+		/*
+		 * Unlock registers and just
+		 * leave them unlocked
+		 */
+		I915_WRITE(PP_CONTROL,
+			   I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
+	}
+	dev_priv->lid_notifier.notifier_call = intel_lid_notify;
+	if (acpi_lid_notifier_register(&dev_priv->lid_notifier)) {
+		DRM_DEBUG_KMS("lid notifier registration failed\n");
+		dev_priv->lid_notifier.notifier_call = NULL;
+	}
+	/* keep the LVDS connector */
+	dev_priv->int_lvds_connector = connector;
+	drm_sysfs_connector_add(connector);
+
+	intel_panel_setup_backlight(dev);
+
+	return true;
+
+failed:
+	DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
+	drm_connector_cleanup(connector);
+	drm_encoder_cleanup(encoder);
+	kfree(intel_lvds);
+	kfree(intel_connector);
+	return false;
+}
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
new file mode 100644
index 00000000..d1928e79
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -0,0 +1,140 @@
+/*
+ * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (c) 2007, 2010 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <drm/drm_edid.h>
+#include "drmP.h"
+#include "drm_edid.h"
+#include "intel_drv.h"
+#include "i915_drv.h"
+
+/**
+ * intel_ddc_probe
+ *
+ */
+bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus)
+{
+	struct drm_i915_private *dev_priv = intel_encoder->base.dev->dev_private;
+	u8 out_buf[] = { 0x0, 0x0};
+	u8 buf[2];
+	struct i2c_msg msgs[] = {
+		{
+			.addr = DDC_ADDR,
+			.flags = 0,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = DDC_ADDR,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = buf,
+		}
+	};
+
+	return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 2) == 2;
+}
+
+/**
+ * intel_ddc_get_modes - get modelist from monitor
+ * @connector: DRM connector device to use
+ * @adapter: i2c adapter
+ *
+ * Fetch the EDID information from @connector using the DDC bus.
+ */
+int intel_ddc_get_modes(struct drm_connector *connector,
+			struct i2c_adapter *adapter)
+{
+	struct edid *edid;
+	int ret = 0;
+
+	edid = drm_get_edid(connector, adapter);
+	if (edid) {
+		drm_mode_connector_update_edid_property(connector, edid);
+		ret = drm_add_edid_modes(connector, edid);
+		drm_edid_to_eld(connector, edid);
+		connector->display_info.raw_edid = NULL;
+		kfree(edid);
+	}
+
+	return ret;
+}
+
+static const struct drm_prop_enum_list force_audio_names[] = {
+	{ HDMI_AUDIO_OFF_DVI, "force-dvi" },
+	{ HDMI_AUDIO_OFF, "off" },
+	{ HDMI_AUDIO_AUTO, "auto" },
+	{ HDMI_AUDIO_ON, "on" },
+};
+
+void
+intel_attach_force_audio_property(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_property *prop;
+
+	prop = dev_priv->force_audio_property;
+	if (prop == NULL) {
+		prop = drm_property_create_enum(dev, 0,
+					   "audio",
+					   force_audio_names,
+					   ARRAY_SIZE(force_audio_names));
+		if (prop == NULL)
+			return;
+
+		dev_priv->force_audio_property = prop;
+	}
+	drm_connector_attach_property(connector, prop, 0);
+}
+
+static const struct drm_prop_enum_list broadcast_rgb_names[] = {
+	{ 0, "Full" },
+	{ 1, "Limited 16:235" },
+};
+
+void
+intel_attach_broadcast_rgb_property(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_property *prop;
+
+	prop = dev_priv->broadcast_rgb_property;
+	if (prop == NULL) {
+		prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM,
+					   "Broadcast RGB",
+					   broadcast_rgb_names,
+					   ARRAY_SIZE(broadcast_rgb_names));
+		if (prop == NULL)
+			return;
+
+		dev_priv->broadcast_rgb_property = prop;
+	}
+
+	drm_connector_attach_property(connector, prop, 0);
+}
diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
new file mode 100644
index 00000000..289140bc
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -0,0 +1,522 @@
+/*
+ * Copyright 2008 Intel Corporation <hong.liu@intel.com>
+ * Copyright 2008 Red Hat <mjg@redhat.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT.  IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/acpi_io.h>
+#include <acpi/video.h>
+
+#include "drmP.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_drv.h"
+
+#define PCI_ASLE 0xe4
+#define PCI_ASLS 0xfc
+
+#define OPREGION_HEADER_OFFSET 0
+#define OPREGION_ACPI_OFFSET   0x100
+#define   ACPI_CLID 0x01ac /* current lid state indicator */
+#define   ACPI_CDCK 0x01b0 /* current docking state indicator */
+#define OPREGION_SWSCI_OFFSET  0x200
+#define OPREGION_ASLE_OFFSET   0x300
+#define OPREGION_VBT_OFFSET    0x400
+
+#define OPREGION_SIGNATURE "IntelGraphicsMem"
+#define MBOX_ACPI      (1<<0)
+#define MBOX_SWSCI     (1<<1)
+#define MBOX_ASLE      (1<<2)
+
+struct opregion_header {
+	u8 signature[16];
+	u32 size;
+	u32 opregion_ver;
+	u8 bios_ver[32];
+	u8 vbios_ver[16];
+	u8 driver_ver[16];
+	u32 mboxes;
+	u8 reserved[164];
+} __attribute__((packed));
+
+/* OpRegion mailbox #1: public ACPI methods */
+struct opregion_acpi {
+	u32 drdy;       /* driver readiness */
+	u32 csts;       /* notification status */
+	u32 cevt;       /* current event */
+	u8 rsvd1[20];
+	u32 didl[8];    /* supported display devices ID list */
+	u32 cpdl[8];    /* currently presented display list */
+	u32 cadl[8];    /* currently active display list */
+	u32 nadl[8];    /* next active devices list */
+	u32 aslp;       /* ASL sleep time-out */
+	u32 tidx;       /* toggle table index */
+	u32 chpd;       /* current hotplug enable indicator */
+	u32 clid;       /* current lid state*/
+	u32 cdck;       /* current docking state */
+	u32 sxsw;       /* Sx state resume */
+	u32 evts;       /* ASL supported events */
+	u32 cnot;       /* current OS notification */
+	u32 nrdy;       /* driver status */
+	u8 rsvd2[60];
+} __attribute__((packed));
+
+/* OpRegion mailbox #2: SWSCI */
+struct opregion_swsci {
+	u32 scic;       /* SWSCI command|status|data */
+	u32 parm;       /* command parameters */
+	u32 dslp;       /* driver sleep time-out */
+	u8 rsvd[244];
+} __attribute__((packed));
+
+/* OpRegion mailbox #3: ASLE */
+struct opregion_asle {
+	u32 ardy;       /* driver readiness */
+	u32 aslc;       /* ASLE interrupt command */
+	u32 tche;       /* technology enabled indicator */
+	u32 alsi;       /* current ALS illuminance reading */
+	u32 bclp;       /* backlight brightness to set */
+	u32 pfit;       /* panel fitting state */
+	u32 cblv;       /* current brightness level */
+	u16 bclm[20];   /* backlight level duty cycle mapping table */
+	u32 cpfm;       /* current panel fitting mode */
+	u32 epfm;       /* enabled panel fitting modes */
+	u8 plut[74];    /* panel LUT and identifier */
+	u32 pfmb;       /* PWM freq and min brightness */
+	u8 rsvd[102];
+} __attribute__((packed));
+
+/* ASLE irq request bits */
+#define ASLE_SET_ALS_ILLUM     (1 << 0)
+#define ASLE_SET_BACKLIGHT     (1 << 1)
+#define ASLE_SET_PFIT          (1 << 2)
+#define ASLE_SET_PWM_FREQ      (1 << 3)
+#define ASLE_REQ_MSK           0xf
+
+/* response bits of ASLE irq request */
+#define ASLE_ALS_ILLUM_FAILED	(1<<10)
+#define ASLE_BACKLIGHT_FAILED	(1<<12)
+#define ASLE_PFIT_FAILED	(1<<14)
+#define ASLE_PWM_FREQ_FAILED	(1<<16)
+
+/* ASLE backlight brightness to set */
+#define ASLE_BCLP_VALID                (1<<31)
+#define ASLE_BCLP_MSK          (~(1<<31))
+
+/* ASLE panel fitting request */
+#define ASLE_PFIT_VALID         (1<<31)
+#define ASLE_PFIT_CENTER (1<<0)
+#define ASLE_PFIT_STRETCH_TEXT (1<<1)
+#define ASLE_PFIT_STRETCH_GFX (1<<2)
+
+/* PWM frequency and minimum brightness */
+#define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
+#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
+#define ASLE_PFMB_PWM_MASK (0x7ffffe00)
+#define ASLE_PFMB_PWM_VALID (1<<31)
+
+#define ASLE_CBLV_VALID         (1<<31)
+
+#define ACPI_OTHER_OUTPUT (0<<8)
+#define ACPI_VGA_OUTPUT (1<<8)
+#define ACPI_TV_OUTPUT (2<<8)
+#define ACPI_DIGITAL_OUTPUT (3<<8)
+#define ACPI_LVDS_OUTPUT (4<<8)
+
+#ifdef CONFIG_ACPI
+static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct opregion_asle *asle = dev_priv->opregion.asle;
+	u32 max;
+
+	if (!(bclp & ASLE_BCLP_VALID))
+		return ASLE_BACKLIGHT_FAILED;
+
+	bclp &= ASLE_BCLP_MSK;
+	if (bclp > 255)
+		return ASLE_BACKLIGHT_FAILED;
+
+	max = intel_panel_get_max_backlight(dev);
+	intel_panel_set_backlight(dev, bclp * max / 255);
+	asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID;
+
+	return 0;
+}
+
+static u32 asle_set_als_illum(struct drm_device *dev, u32 alsi)
+{
+	/* alsi is the current ALS reading in lux. 0 indicates below sensor
+	   range, 0xffff indicates above sensor range. 1-0xfffe are valid */
+	return 0;
+}
+
+static u32 asle_set_pwm_freq(struct drm_device *dev, u32 pfmb)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	if (pfmb & ASLE_PFMB_PWM_VALID) {
+		u32 blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
+		u32 pwm = pfmb & ASLE_PFMB_PWM_MASK;
+		blc_pwm_ctl &= BACKLIGHT_DUTY_CYCLE_MASK;
+		pwm = pwm >> 9;
+		/* FIXME - what do we do with the PWM? */
+	}
+	return 0;
+}
+
+static u32 asle_set_pfit(struct drm_device *dev, u32 pfit)
+{
+	/* Panel fitting is currently controlled by the X code, so this is a
+	   noop until modesetting support works fully */
+	if (!(pfit & ASLE_PFIT_VALID))
+		return ASLE_PFIT_FAILED;
+	return 0;
+}
+
+void intel_opregion_asle_intr(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct opregion_asle *asle = dev_priv->opregion.asle;
+	u32 asle_stat = 0;
+	u32 asle_req;
+
+	if (!asle)
+		return;
+
+	asle_req = asle->aslc & ASLE_REQ_MSK;
+
+	if (!asle_req) {
+		DRM_DEBUG_DRIVER("non asle set request??\n");
+		return;
+	}
+
+	if (asle_req & ASLE_SET_ALS_ILLUM)
+		asle_stat |= asle_set_als_illum(dev, asle->alsi);
+
+	if (asle_req & ASLE_SET_BACKLIGHT)
+		asle_stat |= asle_set_backlight(dev, asle->bclp);
+
+	if (asle_req & ASLE_SET_PFIT)
+		asle_stat |= asle_set_pfit(dev, asle->pfit);
+
+	if (asle_req & ASLE_SET_PWM_FREQ)
+		asle_stat |= asle_set_pwm_freq(dev, asle->pfmb);
+
+	asle->aslc = asle_stat;
+}
+
+void intel_opregion_gse_intr(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct opregion_asle *asle = dev_priv->opregion.asle;
+	u32 asle_stat = 0;
+	u32 asle_req;
+
+	if (!asle)
+		return;
+
+	asle_req = asle->aslc & ASLE_REQ_MSK;
+
+	if (!asle_req) {
+		DRM_DEBUG_DRIVER("non asle set request??\n");
+		return;
+	}
+
+	if (asle_req & ASLE_SET_ALS_ILLUM) {
+		DRM_DEBUG_DRIVER("Illum is not supported\n");
+		asle_stat |= ASLE_ALS_ILLUM_FAILED;
+	}
+
+	if (asle_req & ASLE_SET_BACKLIGHT)
+		asle_stat |= asle_set_backlight(dev, asle->bclp);
+
+	if (asle_req & ASLE_SET_PFIT) {
+		DRM_DEBUG_DRIVER("Pfit is not supported\n");
+		asle_stat |= ASLE_PFIT_FAILED;
+	}
+
+	if (asle_req & ASLE_SET_PWM_FREQ) {
+		DRM_DEBUG_DRIVER("PWM freq is not supported\n");
+		asle_stat |= ASLE_PWM_FREQ_FAILED;
+	}
+
+	asle->aslc = asle_stat;
+}
+#define ASLE_ALS_EN    (1<<0)
+#define ASLE_BLC_EN    (1<<1)
+#define ASLE_PFIT_EN   (1<<2)
+#define ASLE_PFMB_EN   (1<<3)
+
+void intel_opregion_enable_asle(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct opregion_asle *asle = dev_priv->opregion.asle;
+
+	if (asle) {
+		if (IS_MOBILE(dev))
+			intel_enable_asle(dev);
+
+		asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
+			ASLE_PFMB_EN;
+		asle->ardy = 1;
+	}
+}
+
+#define ACPI_EV_DISPLAY_SWITCH (1<<0)
+#define ACPI_EV_LID            (1<<1)
+#define ACPI_EV_DOCK           (1<<2)
+
+static struct intel_opregion *system_opregion;
+
+static int intel_opregion_video_event(struct notifier_block *nb,
+				      unsigned long val, void *data)
+{
+	/* The only video events relevant to opregion are 0x80. These indicate
+	   either a docking event, lid switch or display switch request. In
+	   Linux, these are handled by the dock, button and video drivers.
+	*/
+
+	struct opregion_acpi *acpi;
+	struct acpi_bus_event *event = data;
+	int ret = NOTIFY_OK;
+
+	if (strcmp(event->device_class, ACPI_VIDEO_CLASS) != 0)
+		return NOTIFY_DONE;
+
+	if (!system_opregion)
+		return NOTIFY_DONE;
+
+	acpi = system_opregion->acpi;
+
+	if (event->type == 0x80 && !(acpi->cevt & 0x1))
+		ret = NOTIFY_BAD;
+
+	acpi->csts = 0;
+
+	return ret;
+}
+
+static struct notifier_block intel_opregion_notifier = {
+	.notifier_call = intel_opregion_video_event,
+};
+
+/*
+ * Initialise the DIDL field in opregion. This passes a list of devices to
+ * the firmware. Values are defined by section B.4.2 of the ACPI specification
+ * (version 3)
+ */
+
+static void intel_didl_outputs(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+	struct drm_connector *connector;
+	acpi_handle handle;
+	struct acpi_device *acpi_dev, *acpi_cdev, *acpi_video_bus = NULL;
+	unsigned long long device_id;
+	acpi_status status;
+	int i = 0;
+
+	handle = DEVICE_ACPI_HANDLE(&dev->pdev->dev);
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev)))
+		return;
+
+	if (acpi_is_video_device(acpi_dev))
+		acpi_video_bus = acpi_dev;
+	else {
+		list_for_each_entry(acpi_cdev, &acpi_dev->children, node) {
+			if (acpi_is_video_device(acpi_cdev)) {
+				acpi_video_bus = acpi_cdev;
+				break;
+			}
+		}
+	}
+
+	if (!acpi_video_bus) {
+		printk(KERN_WARNING "No ACPI video bus found\n");
+		return;
+	}
+
+	list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) {
+		if (i >= 8) {
+			dev_printk(KERN_ERR, &dev->pdev->dev,
+				    "More than 8 outputs detected\n");
+			return;
+		}
+		status =
+			acpi_evaluate_integer(acpi_cdev->handle, "_ADR",
+						NULL, &device_id);
+		if (ACPI_SUCCESS(status)) {
+			if (!device_id)
+				goto blind_set;
+			opregion->acpi->didl[i] = (u32)(device_id & 0x0f0f);
+			i++;
+		}
+	}
+
+end:
+	/* If fewer than 8 outputs, the list must be null terminated */
+	if (i < 8)
+		opregion->acpi->didl[i] = 0;
+	return;
+
+blind_set:
+	i = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		int output_type = ACPI_OTHER_OUTPUT;
+		if (i >= 8) {
+			dev_printk(KERN_ERR, &dev->pdev->dev,
+				    "More than 8 outputs detected\n");
+			return;
+		}
+		switch (connector->connector_type) {
+		case DRM_MODE_CONNECTOR_VGA:
+		case DRM_MODE_CONNECTOR_DVIA:
+			output_type = ACPI_VGA_OUTPUT;
+			break;
+		case DRM_MODE_CONNECTOR_Composite:
+		case DRM_MODE_CONNECTOR_SVIDEO:
+		case DRM_MODE_CONNECTOR_Component:
+		case DRM_MODE_CONNECTOR_9PinDIN:
+			output_type = ACPI_TV_OUTPUT;
+			break;
+		case DRM_MODE_CONNECTOR_DVII:
+		case DRM_MODE_CONNECTOR_DVID:
+		case DRM_MODE_CONNECTOR_DisplayPort:
+		case DRM_MODE_CONNECTOR_HDMIA:
+		case DRM_MODE_CONNECTOR_HDMIB:
+			output_type = ACPI_DIGITAL_OUTPUT;
+			break;
+		case DRM_MODE_CONNECTOR_LVDS:
+			output_type = ACPI_LVDS_OUTPUT;
+			break;
+		}
+		opregion->acpi->didl[i] |= (1<<31) | output_type | i;
+		i++;
+	}
+	goto end;
+}
+
+void intel_opregion_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+
+	if (!opregion->header)
+		return;
+
+	if (opregion->acpi) {
+		if (drm_core_check_feature(dev, DRIVER_MODESET))
+			intel_didl_outputs(dev);
+
+		/* Notify BIOS we are ready to handle ACPI video ext notifs.
+		 * Right now, all the events are handled by the ACPI video module.
+		 * We don't actually need to do anything with them. */
+		opregion->acpi->csts = 0;
+		opregion->acpi->drdy = 1;
+
+		system_opregion = opregion;
+		register_acpi_notifier(&intel_opregion_notifier);
+	}
+
+	if (opregion->asle)
+		intel_opregion_enable_asle(dev);
+}
+
+void intel_opregion_fini(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+
+	if (!opregion->header)
+		return;
+
+	if (opregion->acpi) {
+		opregion->acpi->drdy = 0;
+
+		system_opregion = NULL;
+		unregister_acpi_notifier(&intel_opregion_notifier);
+	}
+
+	/* just clear all opregion memory pointers now */
+	iounmap(opregion->header);
+	opregion->header = NULL;
+	opregion->acpi = NULL;
+	opregion->swsci = NULL;
+	opregion->asle = NULL;
+	opregion->vbt = NULL;
+}
+#endif
+
+int intel_opregion_setup(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+	void *base;
+	u32 asls, mboxes;
+	int err = 0;
+
+	pci_read_config_dword(dev->pdev, PCI_ASLS, &asls);
+	DRM_DEBUG_DRIVER("graphic opregion physical addr: 0x%x\n", asls);
+	if (asls == 0) {
+		DRM_DEBUG_DRIVER("ACPI OpRegion not supported!\n");
+		return -ENOTSUPP;
+	}
+
+	base = acpi_os_ioremap(asls, OPREGION_SIZE);
+	if (!base)
+		return -ENOMEM;
+
+	if (memcmp(base, OPREGION_SIGNATURE, 16)) {
+		DRM_DEBUG_DRIVER("opregion signature mismatch\n");
+		err = -EINVAL;
+		goto err_out;
+	}
+	opregion->header = base;
+	opregion->vbt = base + OPREGION_VBT_OFFSET;
+
+	opregion->lid_state = base + ACPI_CLID;
+
+	mboxes = opregion->header->mboxes;
+	if (mboxes & MBOX_ACPI) {
+		DRM_DEBUG_DRIVER("Public ACPI methods supported\n");
+		opregion->acpi = base + OPREGION_ACPI_OFFSET;
+	}
+
+	if (mboxes & MBOX_SWSCI) {
+		DRM_DEBUG_DRIVER("SWSCI supported\n");
+		opregion->swsci = base + OPREGION_SWSCI_OFFSET;
+	}
+	if (mboxes & MBOX_ASLE) {
+		DRM_DEBUG_DRIVER("ASLE supported\n");
+		opregion->asle = base + OPREGION_ASLE_OFFSET;
+	}
+
+	return 0;
+
+err_out:
+	iounmap(base);
+	return err;
+}
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
new file mode 100644
index 00000000..80b331c3
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -0,0 +1,1613 @@
+/*
+ * Copyright © 2009
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Authors:
+ *    Daniel Vetter <daniel@ffwll.ch>
+ *
+ * Derived from Xorg ddx, xf86-video-intel, src/i830_video.c
+ */
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "i915_reg.h"
+#include "intel_drv.h"
+
+/* Limits for overlay size. According to intel doc, the real limits are:
+ * Y width: 4095, UV width (planar): 2047, Y height: 2047,
+ * UV width (planar): * 1023. But the xorg thinks 2048 for height and width. Use
+ * the mininum of both.  */
+#define IMAGE_MAX_WIDTH		2048
+#define IMAGE_MAX_HEIGHT	2046 /* 2 * 1023 */
+/* on 830 and 845 these large limits result in the card hanging */
+#define IMAGE_MAX_WIDTH_LEGACY	1024
+#define IMAGE_MAX_HEIGHT_LEGACY	1088
+
+/* overlay register definitions */
+/* OCMD register */
+#define OCMD_TILED_SURFACE	(0x1<<19)
+#define OCMD_MIRROR_MASK	(0x3<<17)
+#define OCMD_MIRROR_MODE	(0x3<<17)
+#define OCMD_MIRROR_HORIZONTAL	(0x1<<17)
+#define OCMD_MIRROR_VERTICAL	(0x2<<17)
+#define OCMD_MIRROR_BOTH	(0x3<<17)
+#define OCMD_BYTEORDER_MASK	(0x3<<14) /* zero for YUYV or FOURCC YUY2 */
+#define OCMD_UV_SWAP		(0x1<<14) /* YVYU */
+#define OCMD_Y_SWAP		(0x2<<14) /* UYVY or FOURCC UYVY */
+#define OCMD_Y_AND_UV_SWAP	(0x3<<14) /* VYUY */
+#define OCMD_SOURCE_FORMAT_MASK (0xf<<10)
+#define OCMD_RGB_888		(0x1<<10) /* not in i965 Intel docs */
+#define OCMD_RGB_555		(0x2<<10) /* not in i965 Intel docs */
+#define OCMD_RGB_565		(0x3<<10) /* not in i965 Intel docs */
+#define OCMD_YUV_422_PACKED	(0x8<<10)
+#define OCMD_YUV_411_PACKED	(0x9<<10) /* not in i965 Intel docs */
+#define OCMD_YUV_420_PLANAR	(0xc<<10)
+#define OCMD_YUV_422_PLANAR	(0xd<<10)
+#define OCMD_YUV_410_PLANAR	(0xe<<10) /* also 411 */
+#define OCMD_TVSYNCFLIP_PARITY	(0x1<<9)
+#define OCMD_TVSYNCFLIP_ENABLE	(0x1<<7)
+#define OCMD_BUF_TYPE_MASK	(0x1<<5)
+#define OCMD_BUF_TYPE_FRAME	(0x0<<5)
+#define OCMD_BUF_TYPE_FIELD	(0x1<<5)
+#define OCMD_TEST_MODE		(0x1<<4)
+#define OCMD_BUFFER_SELECT	(0x3<<2)
+#define OCMD_BUFFER0		(0x0<<2)
+#define OCMD_BUFFER1		(0x1<<2)
+#define OCMD_FIELD_SELECT	(0x1<<2)
+#define OCMD_FIELD0		(0x0<<1)
+#define OCMD_FIELD1		(0x1<<1)
+#define OCMD_ENABLE		(0x1<<0)
+
+/* OCONFIG register */
+#define OCONF_PIPE_MASK		(0x1<<18)
+#define OCONF_PIPE_A		(0x0<<18)
+#define OCONF_PIPE_B		(0x1<<18)
+#define OCONF_GAMMA2_ENABLE	(0x1<<16)
+#define OCONF_CSC_MODE_BT601	(0x0<<5)
+#define OCONF_CSC_MODE_BT709	(0x1<<5)
+#define OCONF_CSC_BYPASS	(0x1<<4)
+#define OCONF_CC_OUT_8BIT	(0x1<<3)
+#define OCONF_TEST_MODE		(0x1<<2)
+#define OCONF_THREE_LINE_BUFFER	(0x1<<0)
+#define OCONF_TWO_LINE_BUFFER	(0x0<<0)
+
+/* DCLRKM (dst-key) register */
+#define DST_KEY_ENABLE		(0x1<<31)
+#define CLK_RGB24_MASK		0x0
+#define CLK_RGB16_MASK		0x070307
+#define CLK_RGB15_MASK		0x070707
+#define CLK_RGB8I_MASK		0xffffff
+
+#define RGB16_TO_COLORKEY(c) \
+	(((c & 0xF800) << 8) | ((c & 0x07E0) << 5) | ((c & 0x001F) << 3))
+#define RGB15_TO_COLORKEY(c) \
+	(((c & 0x7c00) << 9) | ((c & 0x03E0) << 6) | ((c & 0x001F) << 3))
+
+/* overlay flip addr flag */
+#define OFC_UPDATE		0x1
+
+/* polyphase filter coefficients */
+#define N_HORIZ_Y_TAPS          5
+#define N_VERT_Y_TAPS           3
+#define N_HORIZ_UV_TAPS         3
+#define N_VERT_UV_TAPS          3
+#define N_PHASES                17
+#define MAX_TAPS                5
+
+/* memory bufferd overlay registers */
+struct overlay_registers {
+	u32 OBUF_0Y;
+	u32 OBUF_1Y;
+	u32 OBUF_0U;
+	u32 OBUF_0V;
+	u32 OBUF_1U;
+	u32 OBUF_1V;
+	u32 OSTRIDE;
+	u32 YRGB_VPH;
+	u32 UV_VPH;
+	u32 HORZ_PH;
+	u32 INIT_PHS;
+	u32 DWINPOS;
+	u32 DWINSZ;
+	u32 SWIDTH;
+	u32 SWIDTHSW;
+	u32 SHEIGHT;
+	u32 YRGBSCALE;
+	u32 UVSCALE;
+	u32 OCLRC0;
+	u32 OCLRC1;
+	u32 DCLRKV;
+	u32 DCLRKM;
+	u32 SCLRKVH;
+	u32 SCLRKVL;
+	u32 SCLRKEN;
+	u32 OCONFIG;
+	u32 OCMD;
+	u32 RESERVED1; /* 0x6C */
+	u32 OSTART_0Y;
+	u32 OSTART_1Y;
+	u32 OSTART_0U;
+	u32 OSTART_0V;
+	u32 OSTART_1U;
+	u32 OSTART_1V;
+	u32 OTILEOFF_0Y;
+	u32 OTILEOFF_1Y;
+	u32 OTILEOFF_0U;
+	u32 OTILEOFF_0V;
+	u32 OTILEOFF_1U;
+	u32 OTILEOFF_1V;
+	u32 FASTHSCALE; /* 0xA0 */
+	u32 UVSCALEV; /* 0xA4 */
+	u32 RESERVEDC[(0x200 - 0xA8) / 4]; /* 0xA8 - 0x1FC */
+	u16 Y_VCOEFS[N_VERT_Y_TAPS * N_PHASES]; /* 0x200 */
+	u16 RESERVEDD[0x100 / 2 - N_VERT_Y_TAPS * N_PHASES];
+	u16 Y_HCOEFS[N_HORIZ_Y_TAPS * N_PHASES]; /* 0x300 */
+	u16 RESERVEDE[0x200 / 2 - N_HORIZ_Y_TAPS * N_PHASES];
+	u16 UV_VCOEFS[N_VERT_UV_TAPS * N_PHASES]; /* 0x500 */
+	u16 RESERVEDF[0x100 / 2 - N_VERT_UV_TAPS * N_PHASES];
+	u16 UV_HCOEFS[N_HORIZ_UV_TAPS * N_PHASES]; /* 0x600 */
+	u16 RESERVEDG[0x100 / 2 - N_HORIZ_UV_TAPS * N_PHASES];
+};
+
+struct intel_overlay {
+	struct drm_device *dev;
+	struct intel_crtc *crtc;
+	struct drm_i915_gem_object *vid_bo;
+	struct drm_i915_gem_object *old_vid_bo;
+	int active;
+	int pfit_active;
+	u32 pfit_vscale_ratio; /* shifted-point number, (1<<12) == 1.0 */
+	u32 color_key;
+	u32 brightness, contrast, saturation;
+	u32 old_xscale, old_yscale;
+	/* register access */
+	u32 flip_addr;
+	struct drm_i915_gem_object *reg_bo;
+	/* flip handling */
+	uint32_t last_flip_req;
+	void (*flip_tail)(struct intel_overlay *);
+};
+
+static struct overlay_registers *
+intel_overlay_map_regs(struct intel_overlay *overlay)
+{
+	drm_i915_private_t *dev_priv = overlay->dev->dev_private;
+	struct overlay_registers *regs;
+
+	if (OVERLAY_NEEDS_PHYSICAL(overlay->dev))
+		regs = overlay->reg_bo->phys_obj->handle->vaddr;
+	else
+		regs = io_mapping_map_wc(dev_priv->mm.gtt_mapping,
+					 overlay->reg_bo->gtt_offset);
+
+	return regs;
+}
+
+static void intel_overlay_unmap_regs(struct intel_overlay *overlay,
+				     struct overlay_registers *regs)
+{
+	if (!OVERLAY_NEEDS_PHYSICAL(overlay->dev))
+		io_mapping_unmap(regs);
+}
+
+static int intel_overlay_do_wait_request(struct intel_overlay *overlay,
+					 struct drm_i915_gem_request *request,
+					 void (*tail)(struct intel_overlay *))
+{
+	struct drm_device *dev = overlay->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	BUG_ON(overlay->last_flip_req);
+	ret = i915_add_request(LP_RING(dev_priv), NULL, request);
+	if (ret) {
+	    kfree(request);
+	    return ret;
+	}
+	overlay->last_flip_req = request->seqno;
+	overlay->flip_tail = tail;
+	ret = i915_wait_request(LP_RING(dev_priv), overlay->last_flip_req,
+				true);
+	if (ret)
+		return ret;
+
+	overlay->last_flip_req = 0;
+	return 0;
+}
+
+/* Workaround for i830 bug where pipe a must be enable to change control regs */
+static int
+i830_activate_pipe_a(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_crtc *crtc;
+	struct drm_crtc_helper_funcs *crtc_funcs;
+	struct drm_display_mode vesa_640x480 = {
+		DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656,
+			 752, 800, 0, 480, 489, 492, 525, 0,
+			 DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC)
+	}, *mode;
+
+	crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[0]);
+	if (crtc->dpms_mode == DRM_MODE_DPMS_ON)
+		return 0;
+
+	/* most i8xx have pipe a forced on, so don't trust dpms mode */
+	if (I915_READ(_PIPEACONF) & PIPECONF_ENABLE)
+		return 0;
+
+	crtc_funcs = crtc->base.helper_private;
+	if (crtc_funcs->dpms == NULL)
+		return 0;
+
+	DRM_DEBUG_DRIVER("Enabling pipe A in order to enable overlay\n");
+
+	mode = drm_mode_duplicate(dev, &vesa_640x480);
+	drm_mode_set_crtcinfo(mode, 0);
+	if (!drm_crtc_helper_set_mode(&crtc->base, mode,
+				       crtc->base.x, crtc->base.y,
+				       crtc->base.fb))
+		return 0;
+
+	crtc_funcs->dpms(&crtc->base, DRM_MODE_DPMS_ON);
+	return 1;
+}
+
+static void
+i830_deactivate_pipe_a(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[0];
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+/* overlay needs to be disable in OCMD reg */
+static int intel_overlay_on(struct intel_overlay *overlay)
+{
+	struct drm_device *dev = overlay->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_gem_request *request;
+	int pipe_a_quirk = 0;
+	int ret;
+
+	BUG_ON(overlay->active);
+	overlay->active = 1;
+
+	if (IS_I830(dev)) {
+		pipe_a_quirk = i830_activate_pipe_a(dev);
+		if (pipe_a_quirk < 0)
+			return pipe_a_quirk;
+	}
+
+	request = kzalloc(sizeof(*request), GFP_KERNEL);
+	if (request == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = BEGIN_LP_RING(4);
+	if (ret) {
+		kfree(request);
+		goto out;
+	}
+
+	OUT_RING(MI_OVERLAY_FLIP | MI_OVERLAY_ON);
+	OUT_RING(overlay->flip_addr | OFC_UPDATE);
+	OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+	OUT_RING(MI_NOOP);
+	ADVANCE_LP_RING();
+
+	ret = intel_overlay_do_wait_request(overlay, request, NULL);
+out:
+	if (pipe_a_quirk)
+		i830_deactivate_pipe_a(dev);
+
+	return ret;
+}
+
+/* overlay needs to be enabled in OCMD reg */
+static int intel_overlay_continue(struct intel_overlay *overlay,
+				  bool load_polyphase_filter)
+{
+	struct drm_device *dev = overlay->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_request *request;
+	u32 flip_addr = overlay->flip_addr;
+	u32 tmp;
+	int ret;
+
+	BUG_ON(!overlay->active);
+
+	request = kzalloc(sizeof(*request), GFP_KERNEL);
+	if (request == NULL)
+		return -ENOMEM;
+
+	if (load_polyphase_filter)
+		flip_addr |= OFC_UPDATE;
+
+	/* check for underruns */
+	tmp = I915_READ(DOVSTA);
+	if (tmp & (1 << 17))
+		DRM_DEBUG("overlay underrun, DOVSTA: %x\n", tmp);
+
+	ret = BEGIN_LP_RING(2);
+	if (ret) {
+		kfree(request);
+		return ret;
+	}
+	OUT_RING(MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE);
+	OUT_RING(flip_addr);
+	ADVANCE_LP_RING();
+
+	ret = i915_add_request(LP_RING(dev_priv), NULL, request);
+	if (ret) {
+		kfree(request);
+		return ret;
+	}
+
+	overlay->last_flip_req = request->seqno;
+	return 0;
+}
+
+static void intel_overlay_release_old_vid_tail(struct intel_overlay *overlay)
+{
+	struct drm_i915_gem_object *obj = overlay->old_vid_bo;
+
+	i915_gem_object_unpin(obj);
+	drm_gem_object_unreference(&obj->base);
+
+	overlay->old_vid_bo = NULL;
+}
+
+static void intel_overlay_off_tail(struct intel_overlay *overlay)
+{
+	struct drm_i915_gem_object *obj = overlay->vid_bo;
+
+	/* never have the overlay hw on without showing a frame */
+	BUG_ON(!overlay->vid_bo);
+
+	i915_gem_object_unpin(obj);
+	drm_gem_object_unreference(&obj->base);
+	overlay->vid_bo = NULL;
+
+	overlay->crtc->overlay = NULL;
+	overlay->crtc = NULL;
+	overlay->active = 0;
+}
+
+/* overlay needs to be disabled in OCMD reg */
+static int intel_overlay_off(struct intel_overlay *overlay)
+{
+	struct drm_device *dev = overlay->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 flip_addr = overlay->flip_addr;
+	struct drm_i915_gem_request *request;
+	int ret;
+
+	BUG_ON(!overlay->active);
+
+	request = kzalloc(sizeof(*request), GFP_KERNEL);
+	if (request == NULL)
+		return -ENOMEM;
+
+	/* According to intel docs the overlay hw may hang (when switching
+	 * off) without loading the filter coeffs. It is however unclear whether
+	 * this applies to the disabling of the overlay or to the switching off
+	 * of the hw. Do it in both cases */
+	flip_addr |= OFC_UPDATE;
+
+	ret = BEGIN_LP_RING(6);
+	if (ret) {
+		kfree(request);
+		return ret;
+	}
+	/* wait for overlay to go idle */
+	OUT_RING(MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE);
+	OUT_RING(flip_addr);
+	OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+	/* turn overlay off */
+	OUT_RING(MI_OVERLAY_FLIP | MI_OVERLAY_OFF);
+	OUT_RING(flip_addr);
+	OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+	ADVANCE_LP_RING();
+
+	return intel_overlay_do_wait_request(overlay, request,
+					     intel_overlay_off_tail);
+}
+
+/* recover from an interruption due to a signal
+ * We have to be careful not to repeat work forever an make forward progess. */
+static int intel_overlay_recover_from_interrupt(struct intel_overlay *overlay)
+{
+	struct drm_device *dev = overlay->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	if (overlay->last_flip_req == 0)
+		return 0;
+
+	ret = i915_wait_request(LP_RING(dev_priv), overlay->last_flip_req,
+				true);
+	if (ret)
+		return ret;
+
+	if (overlay->flip_tail)
+		overlay->flip_tail(overlay);
+
+	overlay->last_flip_req = 0;
+	return 0;
+}
+
+/* Wait for pending overlay flip and release old frame.
+ * Needs to be called before the overlay register are changed
+ * via intel_overlay_(un)map_regs
+ */
+static int intel_overlay_release_old_vid(struct intel_overlay *overlay)
+{
+	struct drm_device *dev = overlay->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	int ret;
+
+	/* Only wait if there is actually an old frame to release to
+	 * guarantee forward progress.
+	 */
+	if (!overlay->old_vid_bo)
+		return 0;
+
+	if (I915_READ(ISR) & I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT) {
+		struct drm_i915_gem_request *request;
+
+		/* synchronous slowpath */
+		request = kzalloc(sizeof(*request), GFP_KERNEL);
+		if (request == NULL)
+			return -ENOMEM;
+
+		ret = BEGIN_LP_RING(2);
+		if (ret) {
+			kfree(request);
+			return ret;
+		}
+
+		OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+		OUT_RING(MI_NOOP);
+		ADVANCE_LP_RING();
+
+		ret = intel_overlay_do_wait_request(overlay, request,
+						    intel_overlay_release_old_vid_tail);
+		if (ret)
+			return ret;
+	}
+
+	intel_overlay_release_old_vid_tail(overlay);
+	return 0;
+}
+
+struct put_image_params {
+	int format;
+	short dst_x;
+	short dst_y;
+	short dst_w;
+	short dst_h;
+	short src_w;
+	short src_scan_h;
+	short src_scan_w;
+	short src_h;
+	short stride_Y;
+	short stride_UV;
+	int offset_Y;
+	int offset_U;
+	int offset_V;
+};
+
+static int packed_depth_bytes(u32 format)
+{
+	switch (format & I915_OVERLAY_DEPTH_MASK) {
+	case I915_OVERLAY_YUV422:
+		return 4;
+	case I915_OVERLAY_YUV411:
+		/* return 6; not implemented */
+	default:
+		return -EINVAL;
+	}
+}
+
+static int packed_width_bytes(u32 format, short width)
+{
+	switch (format & I915_OVERLAY_DEPTH_MASK) {
+	case I915_OVERLAY_YUV422:
+		return width << 1;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int uv_hsubsampling(u32 format)
+{
+	switch (format & I915_OVERLAY_DEPTH_MASK) {
+	case I915_OVERLAY_YUV422:
+	case I915_OVERLAY_YUV420:
+		return 2;
+	case I915_OVERLAY_YUV411:
+	case I915_OVERLAY_YUV410:
+		return 4;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int uv_vsubsampling(u32 format)
+{
+	switch (format & I915_OVERLAY_DEPTH_MASK) {
+	case I915_OVERLAY_YUV420:
+	case I915_OVERLAY_YUV410:
+		return 2;
+	case I915_OVERLAY_YUV422:
+	case I915_OVERLAY_YUV411:
+		return 1;
+	default:
+		return -EINVAL;
+	}
+}
+
+static u32 calc_swidthsw(struct drm_device *dev, u32 offset, u32 width)
+{
+	u32 mask, shift, ret;
+	if (IS_GEN2(dev)) {
+		mask = 0x1f;
+		shift = 5;
+	} else {
+		mask = 0x3f;
+		shift = 6;
+	}
+	ret = ((offset + width + mask) >> shift) - (offset >> shift);
+	if (!IS_GEN2(dev))
+		ret <<= 1;
+	ret -= 1;
+	return ret << 2;
+}
+
+static const u16 y_static_hcoeffs[N_HORIZ_Y_TAPS * N_PHASES] = {
+	0x3000, 0xb4a0, 0x1930, 0x1920, 0xb4a0,
+	0x3000, 0xb500, 0x19d0, 0x1880, 0xb440,
+	0x3000, 0xb540, 0x1a88, 0x2f80, 0xb3e0,
+	0x3000, 0xb580, 0x1b30, 0x2e20, 0xb380,
+	0x3000, 0xb5c0, 0x1bd8, 0x2cc0, 0xb320,
+	0x3020, 0xb5e0, 0x1c60, 0x2b80, 0xb2c0,
+	0x3020, 0xb5e0, 0x1cf8, 0x2a20, 0xb260,
+	0x3020, 0xb5e0, 0x1d80, 0x28e0, 0xb200,
+	0x3020, 0xb5c0, 0x1e08, 0x3f40, 0xb1c0,
+	0x3020, 0xb580, 0x1e78, 0x3ce0, 0xb160,
+	0x3040, 0xb520, 0x1ed8, 0x3aa0, 0xb120,
+	0x3040, 0xb4a0, 0x1f30, 0x3880, 0xb0e0,
+	0x3040, 0xb400, 0x1f78, 0x3680, 0xb0a0,
+	0x3020, 0xb340, 0x1fb8, 0x34a0, 0xb060,
+	0x3020, 0xb240, 0x1fe0, 0x32e0, 0xb040,
+	0x3020, 0xb140, 0x1ff8, 0x3160, 0xb020,
+	0xb000, 0x3000, 0x0800, 0x3000, 0xb000
+};
+
+static const u16 uv_static_hcoeffs[N_HORIZ_UV_TAPS * N_PHASES] = {
+	0x3000, 0x1800, 0x1800, 0xb000, 0x18d0, 0x2e60,
+	0xb000, 0x1990, 0x2ce0, 0xb020, 0x1a68, 0x2b40,
+	0xb040, 0x1b20, 0x29e0, 0xb060, 0x1bd8, 0x2880,
+	0xb080, 0x1c88, 0x3e60, 0xb0a0, 0x1d28, 0x3c00,
+	0xb0c0, 0x1db8, 0x39e0, 0xb0e0, 0x1e40, 0x37e0,
+	0xb100, 0x1eb8, 0x3620, 0xb100, 0x1f18, 0x34a0,
+	0xb100, 0x1f68, 0x3360, 0xb0e0, 0x1fa8, 0x3240,
+	0xb0c0, 0x1fe0, 0x3140, 0xb060, 0x1ff0, 0x30a0,
+	0x3000, 0x0800, 0x3000
+};
+
+static void update_polyphase_filter(struct overlay_registers *regs)
+{
+	memcpy(regs->Y_HCOEFS, y_static_hcoeffs, sizeof(y_static_hcoeffs));
+	memcpy(regs->UV_HCOEFS, uv_static_hcoeffs, sizeof(uv_static_hcoeffs));
+}
+
+static bool update_scaling_factors(struct intel_overlay *overlay,
+				   struct overlay_registers *regs,
+				   struct put_image_params *params)
+{
+	/* fixed point with a 12 bit shift */
+	u32 xscale, yscale, xscale_UV, yscale_UV;
+#define FP_SHIFT 12
+#define FRACT_MASK 0xfff
+	bool scale_changed = false;
+	int uv_hscale = uv_hsubsampling(params->format);
+	int uv_vscale = uv_vsubsampling(params->format);
+
+	if (params->dst_w > 1)
+		xscale = ((params->src_scan_w - 1) << FP_SHIFT)
+			/(params->dst_w);
+	else
+		xscale = 1 << FP_SHIFT;
+
+	if (params->dst_h > 1)
+		yscale = ((params->src_scan_h - 1) << FP_SHIFT)
+			/(params->dst_h);
+	else
+		yscale = 1 << FP_SHIFT;
+
+	/*if (params->format & I915_OVERLAY_YUV_PLANAR) {*/
+	xscale_UV = xscale/uv_hscale;
+	yscale_UV = yscale/uv_vscale;
+	/* make the Y scale to UV scale ratio an exact multiply */
+	xscale = xscale_UV * uv_hscale;
+	yscale = yscale_UV * uv_vscale;
+	/*} else {
+	  xscale_UV = 0;
+	  yscale_UV = 0;
+	  }*/
+
+	if (xscale != overlay->old_xscale || yscale != overlay->old_yscale)
+		scale_changed = true;
+	overlay->old_xscale = xscale;
+	overlay->old_yscale = yscale;
+
+	regs->YRGBSCALE = (((yscale & FRACT_MASK) << 20) |
+			   ((xscale >> FP_SHIFT)  << 16) |
+			   ((xscale & FRACT_MASK) << 3));
+
+	regs->UVSCALE = (((yscale_UV & FRACT_MASK) << 20) |
+			 ((xscale_UV >> FP_SHIFT)  << 16) |
+			 ((xscale_UV & FRACT_MASK) << 3));
+
+	regs->UVSCALEV = ((((yscale    >> FP_SHIFT) << 16) |
+			   ((yscale_UV >> FP_SHIFT) << 0)));
+
+	if (scale_changed)
+		update_polyphase_filter(regs);
+
+	return scale_changed;
+}
+
+static void update_colorkey(struct intel_overlay *overlay,
+			    struct overlay_registers *regs)
+{
+	u32 key = overlay->color_key;
+
+	switch (overlay->crtc->base.fb->bits_per_pixel) {
+	case 8:
+		regs->DCLRKV = 0;
+		regs->DCLRKM = CLK_RGB8I_MASK | DST_KEY_ENABLE;
+		break;
+
+	case 16:
+		if (overlay->crtc->base.fb->depth == 15) {
+			regs->DCLRKV = RGB15_TO_COLORKEY(key);
+			regs->DCLRKM = CLK_RGB15_MASK | DST_KEY_ENABLE;
+		} else {
+			regs->DCLRKV = RGB16_TO_COLORKEY(key);
+			regs->DCLRKM = CLK_RGB16_MASK | DST_KEY_ENABLE;
+		}
+		break;
+
+	case 24:
+	case 32:
+		regs->DCLRKV = key;
+		regs->DCLRKM = CLK_RGB24_MASK | DST_KEY_ENABLE;
+		break;
+	}
+}
+
+static u32 overlay_cmd_reg(struct put_image_params *params)
+{
+	u32 cmd = OCMD_ENABLE | OCMD_BUF_TYPE_FRAME | OCMD_BUFFER0;
+
+	if (params->format & I915_OVERLAY_YUV_PLANAR) {
+		switch (params->format & I915_OVERLAY_DEPTH_MASK) {
+		case I915_OVERLAY_YUV422:
+			cmd |= OCMD_YUV_422_PLANAR;
+			break;
+		case I915_OVERLAY_YUV420:
+			cmd |= OCMD_YUV_420_PLANAR;
+			break;
+		case I915_OVERLAY_YUV411:
+		case I915_OVERLAY_YUV410:
+			cmd |= OCMD_YUV_410_PLANAR;
+			break;
+		}
+	} else { /* YUV packed */
+		switch (params->format & I915_OVERLAY_DEPTH_MASK) {
+		case I915_OVERLAY_YUV422:
+			cmd |= OCMD_YUV_422_PACKED;
+			break;
+		case I915_OVERLAY_YUV411:
+			cmd |= OCMD_YUV_411_PACKED;
+			break;
+		}
+
+		switch (params->format & I915_OVERLAY_SWAP_MASK) {
+		case I915_OVERLAY_NO_SWAP:
+			break;
+		case I915_OVERLAY_UV_SWAP:
+			cmd |= OCMD_UV_SWAP;
+			break;
+		case I915_OVERLAY_Y_SWAP:
+			cmd |= OCMD_Y_SWAP;
+			break;
+		case I915_OVERLAY_Y_AND_UV_SWAP:
+			cmd |= OCMD_Y_AND_UV_SWAP;
+			break;
+		}
+	}
+
+	return cmd;
+}
+
+static int intel_overlay_do_put_image(struct intel_overlay *overlay,
+				      struct drm_i915_gem_object *new_bo,
+				      struct put_image_params *params)
+{
+	int ret, tmp_width;
+	struct overlay_registers *regs;
+	bool scale_changed = false;
+	struct drm_device *dev = overlay->dev;
+
+	BUG_ON(!mutex_is_locked(&dev->struct_mutex));
+	BUG_ON(!mutex_is_locked(&dev->mode_config.mutex));
+	BUG_ON(!overlay);
+
+	ret = intel_overlay_release_old_vid(overlay);
+	if (ret != 0)
+		return ret;
+
+	ret = i915_gem_object_pin_to_display_plane(new_bo, 0, NULL);
+	if (ret != 0)
+		return ret;
+
+	ret = i915_gem_object_put_fence(new_bo);
+	if (ret)
+		goto out_unpin;
+
+	if (!overlay->active) {
+		regs = intel_overlay_map_regs(overlay);
+		if (!regs) {
+			ret = -ENOMEM;
+			goto out_unpin;
+		}
+		regs->OCONFIG = OCONF_CC_OUT_8BIT;
+		if (IS_GEN4(overlay->dev))
+			regs->OCONFIG |= OCONF_CSC_MODE_BT709;
+		regs->OCONFIG |= overlay->crtc->pipe == 0 ?
+			OCONF_PIPE_A : OCONF_PIPE_B;
+		intel_overlay_unmap_regs(overlay, regs);
+
+		ret = intel_overlay_on(overlay);
+		if (ret != 0)
+			goto out_unpin;
+	}
+
+	regs = intel_overlay_map_regs(overlay);
+	if (!regs) {
+		ret = -ENOMEM;
+		goto out_unpin;
+	}
+
+	regs->DWINPOS = (params->dst_y << 16) | params->dst_x;
+	regs->DWINSZ = (params->dst_h << 16) | params->dst_w;
+
+	if (params->format & I915_OVERLAY_YUV_PACKED)
+		tmp_width = packed_width_bytes(params->format, params->src_w);
+	else
+		tmp_width = params->src_w;
+
+	regs->SWIDTH = params->src_w;
+	regs->SWIDTHSW = calc_swidthsw(overlay->dev,
+				       params->offset_Y, tmp_width);
+	regs->SHEIGHT = params->src_h;
+	regs->OBUF_0Y = new_bo->gtt_offset + params->offset_Y;
+	regs->OSTRIDE = params->stride_Y;
+
+	if (params->format & I915_OVERLAY_YUV_PLANAR) {
+		int uv_hscale = uv_hsubsampling(params->format);
+		int uv_vscale = uv_vsubsampling(params->format);
+		u32 tmp_U, tmp_V;
+		regs->SWIDTH |= (params->src_w/uv_hscale) << 16;
+		tmp_U = calc_swidthsw(overlay->dev, params->offset_U,
+				      params->src_w/uv_hscale);
+		tmp_V = calc_swidthsw(overlay->dev, params->offset_V,
+				      params->src_w/uv_hscale);
+		regs->SWIDTHSW |= max_t(u32, tmp_U, tmp_V) << 16;
+		regs->SHEIGHT |= (params->src_h/uv_vscale) << 16;
+		regs->OBUF_0U = new_bo->gtt_offset + params->offset_U;
+		regs->OBUF_0V = new_bo->gtt_offset + params->offset_V;
+		regs->OSTRIDE |= params->stride_UV << 16;
+	}
+
+	scale_changed = update_scaling_factors(overlay, regs, params);
+
+	update_colorkey(overlay, regs);
+
+	regs->OCMD = overlay_cmd_reg(params);
+
+	intel_overlay_unmap_regs(overlay, regs);
+
+	ret = intel_overlay_continue(overlay, scale_changed);
+	if (ret)
+		goto out_unpin;
+
+	overlay->old_vid_bo = overlay->vid_bo;
+	overlay->vid_bo = new_bo;
+
+	return 0;
+
+out_unpin:
+	i915_gem_object_unpin(new_bo);
+	return ret;
+}
+
+int intel_overlay_switch_off(struct intel_overlay *overlay)
+{
+	struct overlay_registers *regs;
+	struct drm_device *dev = overlay->dev;
+	int ret;
+
+	BUG_ON(!mutex_is_locked(&dev->struct_mutex));
+	BUG_ON(!mutex_is_locked(&dev->mode_config.mutex));
+
+	ret = intel_overlay_recover_from_interrupt(overlay);
+	if (ret != 0)
+		return ret;
+
+	if (!overlay->active)
+		return 0;
+
+	ret = intel_overlay_release_old_vid(overlay);
+	if (ret != 0)
+		return ret;
+
+	regs = intel_overlay_map_regs(overlay);
+	regs->OCMD = 0;
+	intel_overlay_unmap_regs(overlay, regs);
+
+	ret = intel_overlay_off(overlay);
+	if (ret != 0)
+		return ret;
+
+	intel_overlay_off_tail(overlay);
+	return 0;
+}
+
+static int check_overlay_possible_on_crtc(struct intel_overlay *overlay,
+					  struct intel_crtc *crtc)
+{
+	drm_i915_private_t *dev_priv = overlay->dev->dev_private;
+
+	if (!crtc->active)
+		return -EINVAL;
+
+	/* can't use the overlay with double wide pipe */
+	if (INTEL_INFO(overlay->dev)->gen < 4 &&
+	    (I915_READ(PIPECONF(crtc->pipe)) & (PIPECONF_DOUBLE_WIDE | PIPECONF_ENABLE)) != PIPECONF_ENABLE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void update_pfit_vscale_ratio(struct intel_overlay *overlay)
+{
+	struct drm_device *dev = overlay->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 pfit_control = I915_READ(PFIT_CONTROL);
+	u32 ratio;
+
+	/* XXX: This is not the same logic as in the xorg driver, but more in
+	 * line with the intel documentation for the i965
+	 */
+	if (INTEL_INFO(dev)->gen >= 4) {
+		/* on i965 use the PGM reg to read out the autoscaler values */
+		ratio = I915_READ(PFIT_PGM_RATIOS) >> PFIT_VERT_SCALE_SHIFT_965;
+	} else {
+		if (pfit_control & VERT_AUTO_SCALE)
+			ratio = I915_READ(PFIT_AUTO_RATIOS);
+		else
+			ratio = I915_READ(PFIT_PGM_RATIOS);
+		ratio >>= PFIT_VERT_SCALE_SHIFT;
+	}
+
+	overlay->pfit_vscale_ratio = ratio;
+}
+
+static int check_overlay_dst(struct intel_overlay *overlay,
+			     struct drm_intel_overlay_put_image *rec)
+{
+	struct drm_display_mode *mode = &overlay->crtc->base.mode;
+
+	if (rec->dst_x < mode->hdisplay &&
+	    rec->dst_x + rec->dst_width <= mode->hdisplay &&
+	    rec->dst_y < mode->vdisplay &&
+	    rec->dst_y + rec->dst_height <= mode->vdisplay)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static int check_overlay_scaling(struct put_image_params *rec)
+{
+	u32 tmp;
+
+	/* downscaling limit is 8.0 */
+	tmp = ((rec->src_scan_h << 16) / rec->dst_h) >> 16;
+	if (tmp > 7)
+		return -EINVAL;
+	tmp = ((rec->src_scan_w << 16) / rec->dst_w) >> 16;
+	if (tmp > 7)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int check_overlay_src(struct drm_device *dev,
+			     struct drm_intel_overlay_put_image *rec,
+			     struct drm_i915_gem_object *new_bo)
+{
+	int uv_hscale = uv_hsubsampling(rec->flags);
+	int uv_vscale = uv_vsubsampling(rec->flags);
+	u32 stride_mask;
+	int depth;
+	u32 tmp;
+
+	/* check src dimensions */
+	if (IS_845G(dev) || IS_I830(dev)) {
+		if (rec->src_height > IMAGE_MAX_HEIGHT_LEGACY ||
+		    rec->src_width  > IMAGE_MAX_WIDTH_LEGACY)
+			return -EINVAL;
+	} else {
+		if (rec->src_height > IMAGE_MAX_HEIGHT ||
+		    rec->src_width  > IMAGE_MAX_WIDTH)
+			return -EINVAL;
+	}
+
+	/* better safe than sorry, use 4 as the maximal subsampling ratio */
+	if (rec->src_height < N_VERT_Y_TAPS*4 ||
+	    rec->src_width  < N_HORIZ_Y_TAPS*4)
+		return -EINVAL;
+
+	/* check alignment constraints */
+	switch (rec->flags & I915_OVERLAY_TYPE_MASK) {
+	case I915_OVERLAY_RGB:
+		/* not implemented */
+		return -EINVAL;
+
+	case I915_OVERLAY_YUV_PACKED:
+		if (uv_vscale != 1)
+			return -EINVAL;
+
+		depth = packed_depth_bytes(rec->flags);
+		if (depth < 0)
+			return depth;
+
+		/* ignore UV planes */
+		rec->stride_UV = 0;
+		rec->offset_U = 0;
+		rec->offset_V = 0;
+		/* check pixel alignment */
+		if (rec->offset_Y % depth)
+			return -EINVAL;
+		break;
+
+	case I915_OVERLAY_YUV_PLANAR:
+		if (uv_vscale < 0 || uv_hscale < 0)
+			return -EINVAL;
+		/* no offset restrictions for planar formats */
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (rec->src_width % uv_hscale)
+		return -EINVAL;
+
+	/* stride checking */
+	if (IS_I830(dev) || IS_845G(dev))
+		stride_mask = 255;
+	else
+		stride_mask = 63;
+
+	if (rec->stride_Y & stride_mask || rec->stride_UV & stride_mask)
+		return -EINVAL;
+	if (IS_GEN4(dev) && rec->stride_Y < 512)
+		return -EINVAL;
+
+	tmp = (rec->flags & I915_OVERLAY_TYPE_MASK) == I915_OVERLAY_YUV_PLANAR ?
+		4096 : 8192;
+	if (rec->stride_Y > tmp || rec->stride_UV > 2*1024)
+		return -EINVAL;
+
+	/* check buffer dimensions */
+	switch (rec->flags & I915_OVERLAY_TYPE_MASK) {
+	case I915_OVERLAY_RGB:
+	case I915_OVERLAY_YUV_PACKED:
+		/* always 4 Y values per depth pixels */
+		if (packed_width_bytes(rec->flags, rec->src_width) > rec->stride_Y)
+			return -EINVAL;
+
+		tmp = rec->stride_Y*rec->src_height;
+		if (rec->offset_Y + tmp > new_bo->base.size)
+			return -EINVAL;
+		break;
+
+	case I915_OVERLAY_YUV_PLANAR:
+		if (rec->src_width > rec->stride_Y)
+			return -EINVAL;
+		if (rec->src_width/uv_hscale > rec->stride_UV)
+			return -EINVAL;
+
+		tmp = rec->stride_Y * rec->src_height;
+		if (rec->offset_Y + tmp > new_bo->base.size)
+			return -EINVAL;
+
+		tmp = rec->stride_UV * (rec->src_height / uv_vscale);
+		if (rec->offset_U + tmp > new_bo->base.size ||
+		    rec->offset_V + tmp > new_bo->base.size)
+			return -EINVAL;
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int intel_panel_fitter_pipe(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32  pfit_control;
+
+	/* i830 doesn't have a panel fitter */
+	if (IS_I830(dev))
+		return -1;
+
+	pfit_control = I915_READ(PFIT_CONTROL);
+
+	/* See if the panel fitter is in use */
+	if ((pfit_control & PFIT_ENABLE) == 0)
+		return -1;
+
+	/* 965 can place panel fitter on either pipe */
+	if (IS_GEN4(dev))
+		return (pfit_control >> 29) & 0x3;
+
+	/* older chips can only use pipe 1 */
+	return 1;
+}
+
+int intel_overlay_put_image(struct drm_device *dev, void *data,
+			    struct drm_file *file_priv)
+{
+	struct drm_intel_overlay_put_image *put_image_rec = data;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_overlay *overlay;
+	struct drm_mode_object *drmmode_obj;
+	struct intel_crtc *crtc;
+	struct drm_i915_gem_object *new_bo;
+	struct put_image_params *params;
+	int ret;
+
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	overlay = dev_priv->overlay;
+	if (!overlay) {
+		DRM_DEBUG("userspace bug: no overlay\n");
+		return -ENODEV;
+	}
+
+	if (!(put_image_rec->flags & I915_OVERLAY_ENABLE)) {
+		mutex_lock(&dev->mode_config.mutex);
+		mutex_lock(&dev->struct_mutex);
+
+		ret = intel_overlay_switch_off(overlay);
+
+		mutex_unlock(&dev->struct_mutex);
+		mutex_unlock(&dev->mode_config.mutex);
+
+		return ret;
+	}
+
+	params = kmalloc(sizeof(struct put_image_params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	drmmode_obj = drm_mode_object_find(dev, put_image_rec->crtc_id,
+					   DRM_MODE_OBJECT_CRTC);
+	if (!drmmode_obj) {
+		ret = -ENOENT;
+		goto out_free;
+	}
+	crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
+
+	new_bo = to_intel_bo(drm_gem_object_lookup(dev, file_priv,
+						   put_image_rec->bo_handle));
+	if (&new_bo->base == NULL) {
+		ret = -ENOENT;
+		goto out_free;
+	}
+
+	mutex_lock(&dev->mode_config.mutex);
+	mutex_lock(&dev->struct_mutex);
+
+	if (new_bo->tiling_mode) {
+		DRM_ERROR("buffer used for overlay image can not be tiled\n");
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	ret = intel_overlay_recover_from_interrupt(overlay);
+	if (ret != 0)
+		goto out_unlock;
+
+	if (overlay->crtc != crtc) {
+		struct drm_display_mode *mode = &crtc->base.mode;
+		ret = intel_overlay_switch_off(overlay);
+		if (ret != 0)
+			goto out_unlock;
+
+		ret = check_overlay_possible_on_crtc(overlay, crtc);
+		if (ret != 0)
+			goto out_unlock;
+
+		overlay->crtc = crtc;
+		crtc->overlay = overlay;
+
+		/* line too wide, i.e. one-line-mode */
+		if (mode->hdisplay > 1024 &&
+		    intel_panel_fitter_pipe(dev) == crtc->pipe) {
+			overlay->pfit_active = 1;
+			update_pfit_vscale_ratio(overlay);
+		} else
+			overlay->pfit_active = 0;
+	}
+
+	ret = check_overlay_dst(overlay, put_image_rec);
+	if (ret != 0)
+		goto out_unlock;
+
+	if (overlay->pfit_active) {
+		params->dst_y = ((((u32)put_image_rec->dst_y) << 12) /
+				 overlay->pfit_vscale_ratio);
+		/* shifting right rounds downwards, so add 1 */
+		params->dst_h = ((((u32)put_image_rec->dst_height) << 12) /
+				 overlay->pfit_vscale_ratio) + 1;
+	} else {
+		params->dst_y = put_image_rec->dst_y;
+		params->dst_h = put_image_rec->dst_height;
+	}
+	params->dst_x = put_image_rec->dst_x;
+	params->dst_w = put_image_rec->dst_width;
+
+	params->src_w = put_image_rec->src_width;
+	params->src_h = put_image_rec->src_height;
+	params->src_scan_w = put_image_rec->src_scan_width;
+	params->src_scan_h = put_image_rec->src_scan_height;
+	if (params->src_scan_h > params->src_h ||
+	    params->src_scan_w > params->src_w) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	ret = check_overlay_src(dev, put_image_rec, new_bo);
+	if (ret != 0)
+		goto out_unlock;
+	params->format = put_image_rec->flags & ~I915_OVERLAY_FLAGS_MASK;
+	params->stride_Y = put_image_rec->stride_Y;
+	params->stride_UV = put_image_rec->stride_UV;
+	params->offset_Y = put_image_rec->offset_Y;
+	params->offset_U = put_image_rec->offset_U;
+	params->offset_V = put_image_rec->offset_V;
+
+	/* Check scaling after src size to prevent a divide-by-zero. */
+	ret = check_overlay_scaling(params);
+	if (ret != 0)
+		goto out_unlock;
+
+	ret = intel_overlay_do_put_image(overlay, new_bo, params);
+	if (ret != 0)
+		goto out_unlock;
+
+	mutex_unlock(&dev->struct_mutex);
+	mutex_unlock(&dev->mode_config.mutex);
+
+	kfree(params);
+
+	return 0;
+
+out_unlock:
+	mutex_unlock(&dev->struct_mutex);
+	mutex_unlock(&dev->mode_config.mutex);
+	drm_gem_object_unreference_unlocked(&new_bo->base);
+out_free:
+	kfree(params);
+
+	return ret;
+}
+
+static void update_reg_attrs(struct intel_overlay *overlay,
+			     struct overlay_registers *regs)
+{
+	regs->OCLRC0 = (overlay->contrast << 18) | (overlay->brightness & 0xff);
+	regs->OCLRC1 = overlay->saturation;
+}
+
+static bool check_gamma_bounds(u32 gamma1, u32 gamma2)
+{
+	int i;
+
+	if (gamma1 & 0xff000000 || gamma2 & 0xff000000)
+		return false;
+
+	for (i = 0; i < 3; i++) {
+		if (((gamma1 >> i*8) & 0xff) >= ((gamma2 >> i*8) & 0xff))
+			return false;
+	}
+
+	return true;
+}
+
+static bool check_gamma5_errata(u32 gamma5)
+{
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		if (((gamma5 >> i*8) & 0xff) == 0x80)
+			return false;
+	}
+
+	return true;
+}
+
+static int check_gamma(struct drm_intel_overlay_attrs *attrs)
+{
+	if (!check_gamma_bounds(0, attrs->gamma0) ||
+	    !check_gamma_bounds(attrs->gamma0, attrs->gamma1) ||
+	    !check_gamma_bounds(attrs->gamma1, attrs->gamma2) ||
+	    !check_gamma_bounds(attrs->gamma2, attrs->gamma3) ||
+	    !check_gamma_bounds(attrs->gamma3, attrs->gamma4) ||
+	    !check_gamma_bounds(attrs->gamma4, attrs->gamma5) ||
+	    !check_gamma_bounds(attrs->gamma5, 0x00ffffff))
+		return -EINVAL;
+
+	if (!check_gamma5_errata(attrs->gamma5))
+		return -EINVAL;
+
+	return 0;
+}
+
+int intel_overlay_attrs(struct drm_device *dev, void *data,
+			struct drm_file *file_priv)
+{
+	struct drm_intel_overlay_attrs *attrs = data;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_overlay *overlay;
+	struct overlay_registers *regs;
+	int ret;
+
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	overlay = dev_priv->overlay;
+	if (!overlay) {
+		DRM_DEBUG("userspace bug: no overlay\n");
+		return -ENODEV;
+	}
+
+	mutex_lock(&dev->mode_config.mutex);
+	mutex_lock(&dev->struct_mutex);
+
+	ret = -EINVAL;
+	if (!(attrs->flags & I915_OVERLAY_UPDATE_ATTRS)) {
+		attrs->color_key  = overlay->color_key;
+		attrs->brightness = overlay->brightness;
+		attrs->contrast   = overlay->contrast;
+		attrs->saturation = overlay->saturation;
+
+		if (!IS_GEN2(dev)) {
+			attrs->gamma0 = I915_READ(OGAMC0);
+			attrs->gamma1 = I915_READ(OGAMC1);
+			attrs->gamma2 = I915_READ(OGAMC2);
+			attrs->gamma3 = I915_READ(OGAMC3);
+			attrs->gamma4 = I915_READ(OGAMC4);
+			attrs->gamma5 = I915_READ(OGAMC5);
+		}
+	} else {
+		if (attrs->brightness < -128 || attrs->brightness > 127)
+			goto out_unlock;
+		if (attrs->contrast > 255)
+			goto out_unlock;
+		if (attrs->saturation > 1023)
+			goto out_unlock;
+
+		overlay->color_key  = attrs->color_key;
+		overlay->brightness = attrs->brightness;
+		overlay->contrast   = attrs->contrast;
+		overlay->saturation = attrs->saturation;
+
+		regs = intel_overlay_map_regs(overlay);
+		if (!regs) {
+			ret = -ENOMEM;
+			goto out_unlock;
+		}
+
+		update_reg_attrs(overlay, regs);
+
+		intel_overlay_unmap_regs(overlay, regs);
+
+		if (attrs->flags & I915_OVERLAY_UPDATE_GAMMA) {
+			if (IS_GEN2(dev))
+				goto out_unlock;
+
+			if (overlay->active) {
+				ret = -EBUSY;
+				goto out_unlock;
+			}
+
+			ret = check_gamma(attrs);
+			if (ret)
+				goto out_unlock;
+
+			I915_WRITE(OGAMC0, attrs->gamma0);
+			I915_WRITE(OGAMC1, attrs->gamma1);
+			I915_WRITE(OGAMC2, attrs->gamma2);
+			I915_WRITE(OGAMC3, attrs->gamma3);
+			I915_WRITE(OGAMC4, attrs->gamma4);
+			I915_WRITE(OGAMC5, attrs->gamma5);
+		}
+	}
+
+	ret = 0;
+out_unlock:
+	mutex_unlock(&dev->struct_mutex);
+	mutex_unlock(&dev->mode_config.mutex);
+
+	return ret;
+}
+
+void intel_setup_overlay(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_overlay *overlay;
+	struct drm_i915_gem_object *reg_bo;
+	struct overlay_registers *regs;
+	int ret;
+
+	if (!HAS_OVERLAY(dev))
+		return;
+
+	overlay = kzalloc(sizeof(struct intel_overlay), GFP_KERNEL);
+	if (!overlay)
+		return;
+
+	mutex_lock(&dev->struct_mutex);
+	if (WARN_ON(dev_priv->overlay))
+		goto out_free;
+
+	overlay->dev = dev;
+
+	reg_bo = i915_gem_alloc_object(dev, PAGE_SIZE);
+	if (!reg_bo)
+		goto out_free;
+	overlay->reg_bo = reg_bo;
+
+	if (OVERLAY_NEEDS_PHYSICAL(dev)) {
+		ret = i915_gem_attach_phys_object(dev, reg_bo,
+						  I915_GEM_PHYS_OVERLAY_REGS,
+						  PAGE_SIZE);
+		if (ret) {
+			DRM_ERROR("failed to attach phys overlay regs\n");
+			goto out_free_bo;
+		}
+		overlay->flip_addr = reg_bo->phys_obj->handle->busaddr;
+	} else {
+		ret = i915_gem_object_pin(reg_bo, PAGE_SIZE, true);
+		if (ret) {
+			DRM_ERROR("failed to pin overlay register bo\n");
+			goto out_free_bo;
+		}
+		overlay->flip_addr = reg_bo->gtt_offset;
+
+		ret = i915_gem_object_set_to_gtt_domain(reg_bo, true);
+		if (ret) {
+			DRM_ERROR("failed to move overlay register bo into the GTT\n");
+			goto out_unpin_bo;
+		}
+	}
+
+	/* init all values */
+	overlay->color_key = 0x0101fe;
+	overlay->brightness = -19;
+	overlay->contrast = 75;
+	overlay->saturation = 146;
+
+	regs = intel_overlay_map_regs(overlay);
+	if (!regs)
+		goto out_unpin_bo;
+
+	memset(regs, 0, sizeof(struct overlay_registers));
+	update_polyphase_filter(regs);
+	update_reg_attrs(overlay, regs);
+
+	intel_overlay_unmap_regs(overlay, regs);
+
+	dev_priv->overlay = overlay;
+	mutex_unlock(&dev->struct_mutex);
+	DRM_INFO("initialized overlay support\n");
+	return;
+
+out_unpin_bo:
+	if (!OVERLAY_NEEDS_PHYSICAL(dev))
+		i915_gem_object_unpin(reg_bo);
+out_free_bo:
+	drm_gem_object_unreference(&reg_bo->base);
+out_free:
+	mutex_unlock(&dev->struct_mutex);
+	kfree(overlay);
+	return;
+}
+
+void intel_cleanup_overlay(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (!dev_priv->overlay)
+		return;
+
+	/* The bo's should be free'd by the generic code already.
+	 * Furthermore modesetting teardown happens beforehand so the
+	 * hardware should be off already */
+	BUG_ON(dev_priv->overlay->active);
+
+	drm_gem_object_unreference_unlocked(&dev_priv->overlay->reg_bo->base);
+	kfree(dev_priv->overlay);
+}
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/seq_file.h>
+
+struct intel_overlay_error_state {
+	struct overlay_registers regs;
+	unsigned long base;
+	u32 dovsta;
+	u32 isr;
+};
+
+static struct overlay_registers *
+intel_overlay_map_regs_atomic(struct intel_overlay *overlay)
+{
+	drm_i915_private_t *dev_priv = overlay->dev->dev_private;
+	struct overlay_registers *regs;
+
+	if (OVERLAY_NEEDS_PHYSICAL(overlay->dev))
+		regs = overlay->reg_bo->phys_obj->handle->vaddr;
+	else
+		regs = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
+						overlay->reg_bo->gtt_offset);
+
+	return regs;
+}
+
+static void intel_overlay_unmap_regs_atomic(struct intel_overlay *overlay,
+					    struct overlay_registers *regs)
+{
+	if (!OVERLAY_NEEDS_PHYSICAL(overlay->dev))
+		io_mapping_unmap_atomic(regs);
+}
+
+
+struct intel_overlay_error_state *
+intel_overlay_capture_error_state(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_overlay *overlay = dev_priv->overlay;
+	struct intel_overlay_error_state *error;
+	struct overlay_registers __iomem *regs;
+
+	if (!overlay || !overlay->active)
+		return NULL;
+
+	error = kmalloc(sizeof(*error), GFP_ATOMIC);
+	if (error == NULL)
+		return NULL;
+
+	error->dovsta = I915_READ(DOVSTA);
+	error->isr = I915_READ(ISR);
+	if (OVERLAY_NEEDS_PHYSICAL(overlay->dev))
+		error->base = (long) overlay->reg_bo->phys_obj->handle->vaddr;
+	else
+		error->base = (long) overlay->reg_bo->gtt_offset;
+
+	regs = intel_overlay_map_regs_atomic(overlay);
+	if (!regs)
+		goto err;
+
+	memcpy_fromio(&error->regs, regs, sizeof(struct overlay_registers));
+	intel_overlay_unmap_regs_atomic(overlay, regs);
+
+	return error;
+
+err:
+	kfree(error);
+	return NULL;
+}
+
+void
+intel_overlay_print_error_state(struct seq_file *m, struct intel_overlay_error_state *error)
+{
+	seq_printf(m, "Overlay, status: 0x%08x, interrupt: 0x%08x\n",
+		   error->dovsta, error->isr);
+	seq_printf(m, "  Register file at 0x%08lx:\n",
+		   error->base);
+
+#define P(x) seq_printf(m, "    " #x ":	0x%08x\n", error->regs.x)
+	P(OBUF_0Y);
+	P(OBUF_1Y);
+	P(OBUF_0U);
+	P(OBUF_0V);
+	P(OBUF_1U);
+	P(OBUF_1V);
+	P(OSTRIDE);
+	P(YRGB_VPH);
+	P(UV_VPH);
+	P(HORZ_PH);
+	P(INIT_PHS);
+	P(DWINPOS);
+	P(DWINSZ);
+	P(SWIDTH);
+	P(SWIDTHSW);
+	P(SHEIGHT);
+	P(YRGBSCALE);
+	P(UVSCALE);
+	P(OCLRC0);
+	P(OCLRC1);
+	P(DCLRKV);
+	P(DCLRKM);
+	P(SCLRKVH);
+	P(SCLRKVL);
+	P(SCLRKEN);
+	P(OCONFIG);
+	P(OCMD);
+	P(OSTART_0Y);
+	P(OSTART_1Y);
+	P(OSTART_0U);
+	P(OSTART_0V);
+	P(OSTART_1U);
+	P(OSTART_1V);
+	P(OTILEOFF_0Y);
+	P(OTILEOFF_1Y);
+	P(OTILEOFF_0U);
+	P(OTILEOFF_0V);
+	P(OTILEOFF_1U);
+	P(OTILEOFF_1V);
+	P(FASTHSCALE);
+	P(UVSCALEV);
+#undef P
+}
+#endif
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
new file mode 100644
index 00000000..48177ec4
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -0,0 +1,379 @@
+/*
+ * Copyright © 2006-2010 Intel Corporation
+ * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *      Dave Airlie <airlied@linux.ie>
+ *      Jesse Barnes <jesse.barnes@intel.com>
+ *      Chris Wilson <chris@chris-wilson.co.uk>
+ */
+
+#include "intel_drv.h"
+
+#define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
+
+void
+intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
+		       struct drm_display_mode *adjusted_mode)
+{
+	adjusted_mode->hdisplay = fixed_mode->hdisplay;
+	adjusted_mode->hsync_start = fixed_mode->hsync_start;
+	adjusted_mode->hsync_end = fixed_mode->hsync_end;
+	adjusted_mode->htotal = fixed_mode->htotal;
+
+	adjusted_mode->vdisplay = fixed_mode->vdisplay;
+	adjusted_mode->vsync_start = fixed_mode->vsync_start;
+	adjusted_mode->vsync_end = fixed_mode->vsync_end;
+	adjusted_mode->vtotal = fixed_mode->vtotal;
+
+	adjusted_mode->clock = fixed_mode->clock;
+}
+
+/* adjusted_mode has been preset to be the panel's fixed mode */
+void
+intel_pch_panel_fitting(struct drm_device *dev,
+			int fitting_mode,
+			struct drm_display_mode *mode,
+			struct drm_display_mode *adjusted_mode)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int x, y, width, height;
+
+	x = y = width = height = 0;
+
+	/* Native modes don't need fitting */
+	if (adjusted_mode->hdisplay == mode->hdisplay &&
+	    adjusted_mode->vdisplay == mode->vdisplay)
+		goto done;
+
+	switch (fitting_mode) {
+	case DRM_MODE_SCALE_CENTER:
+		width = mode->hdisplay;
+		height = mode->vdisplay;
+		x = (adjusted_mode->hdisplay - width + 1)/2;
+		y = (adjusted_mode->vdisplay - height + 1)/2;
+		break;
+
+	case DRM_MODE_SCALE_ASPECT:
+		/* Scale but preserve the aspect ratio */
+		{
+			u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
+			u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
+			if (scaled_width > scaled_height) { /* pillar */
+				width = scaled_height / mode->vdisplay;
+				if (width & 1)
+					width++;
+				x = (adjusted_mode->hdisplay - width + 1) / 2;
+				y = 0;
+				height = adjusted_mode->vdisplay;
+			} else if (scaled_width < scaled_height) { /* letter */
+				height = scaled_width / mode->hdisplay;
+				if (height & 1)
+				    height++;
+				y = (adjusted_mode->vdisplay - height + 1) / 2;
+				x = 0;
+				width = adjusted_mode->hdisplay;
+			} else {
+				x = y = 0;
+				width = adjusted_mode->hdisplay;
+				height = adjusted_mode->vdisplay;
+			}
+		}
+		break;
+
+	default:
+	case DRM_MODE_SCALE_FULLSCREEN:
+		x = y = 0;
+		width = adjusted_mode->hdisplay;
+		height = adjusted_mode->vdisplay;
+		break;
+	}
+
+done:
+	dev_priv->pch_pf_pos = (x << 16) | y;
+	dev_priv->pch_pf_size = (width << 16) | height;
+}
+
+static int is_backlight_combination_mode(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (INTEL_INFO(dev)->gen >= 4)
+		return I915_READ(BLC_PWM_CTL2) & BLM_COMBINATION_MODE;
+
+	if (IS_GEN2(dev))
+		return I915_READ(BLC_PWM_CTL) & BLM_LEGACY_MODE;
+
+	return 0;
+}
+
+static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv)
+{
+	u32 val;
+
+	/* Restore the CTL value if it lost, e.g. GPU reset */
+
+	if (HAS_PCH_SPLIT(dev_priv->dev)) {
+		val = I915_READ(BLC_PWM_PCH_CTL2);
+		if (dev_priv->saveBLC_PWM_CTL2 == 0) {
+			dev_priv->saveBLC_PWM_CTL2 = val;
+		} else if (val == 0) {
+			I915_WRITE(BLC_PWM_PCH_CTL2,
+				   dev_priv->saveBLC_PWM_CTL2);
+			val = dev_priv->saveBLC_PWM_CTL2;
+		}
+	} else {
+		val = I915_READ(BLC_PWM_CTL);
+		if (dev_priv->saveBLC_PWM_CTL == 0) {
+			dev_priv->saveBLC_PWM_CTL = val;
+			dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
+		} else if (val == 0) {
+			I915_WRITE(BLC_PWM_CTL,
+				   dev_priv->saveBLC_PWM_CTL);
+			I915_WRITE(BLC_PWM_CTL2,
+				   dev_priv->saveBLC_PWM_CTL2);
+			val = dev_priv->saveBLC_PWM_CTL;
+		}
+	}
+
+	return val;
+}
+
+u32 intel_panel_get_max_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 max;
+
+	max = i915_read_blc_pwm_ctl(dev_priv);
+	if (max == 0) {
+		/* XXX add code here to query mode clock or hardware clock
+		 * and program max PWM appropriately.
+		 */
+		printk_once(KERN_WARNING "fixme: max PWM is zero.\n");
+		return 1;
+	}
+
+	if (HAS_PCH_SPLIT(dev)) {
+		max >>= 16;
+	} else {
+		if (INTEL_INFO(dev)->gen < 4)
+			max >>= 17;
+		else
+			max >>= 16;
+
+		if (is_backlight_combination_mode(dev))
+			max *= 0xff;
+	}
+
+	DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max);
+	return max;
+}
+
+u32 intel_panel_get_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 val;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		val = I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
+	} else {
+		val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
+		if (INTEL_INFO(dev)->gen < 4)
+			val >>= 1;
+
+		if (is_backlight_combination_mode(dev)) {
+			u8 lbpc;
+
+			pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc);
+			val *= lbpc;
+		}
+	}
+
+	DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
+	return val;
+}
+
+static void intel_pch_panel_set_backlight(struct drm_device *dev, u32 level)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 val = I915_READ(BLC_PWM_CPU_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
+	I915_WRITE(BLC_PWM_CPU_CTL, val | level);
+}
+
+static void intel_panel_actually_set_backlight(struct drm_device *dev, u32 level)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 tmp;
+
+	DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level);
+
+	if (HAS_PCH_SPLIT(dev))
+		return intel_pch_panel_set_backlight(dev, level);
+
+	if (is_backlight_combination_mode(dev)) {
+		u32 max = intel_panel_get_max_backlight(dev);
+		u8 lbpc;
+
+		lbpc = level * 0xfe / max + 1;
+		level /= lbpc;
+		pci_write_config_byte(dev->pdev, PCI_LBPC, lbpc);
+	}
+
+	tmp = I915_READ(BLC_PWM_CTL);
+	if (INTEL_INFO(dev)->gen < 4) 
+		level <<= 1;
+	tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK;
+	I915_WRITE(BLC_PWM_CTL, tmp | level);
+}
+
+void intel_panel_set_backlight(struct drm_device *dev, u32 level)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->backlight_level = level;
+	if (dev_priv->backlight_enabled)
+		intel_panel_actually_set_backlight(dev, level);
+}
+
+void intel_panel_disable_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->backlight_enabled = false;
+	intel_panel_actually_set_backlight(dev, 0);
+}
+
+void intel_panel_enable_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->backlight_level == 0)
+		dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
+
+	dev_priv->backlight_enabled = true;
+	intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
+}
+
+static void intel_panel_init_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->backlight_level = intel_panel_get_backlight(dev);
+	dev_priv->backlight_enabled = dev_priv->backlight_level != 0;
+}
+
+enum drm_connector_status
+intel_panel_detect(struct drm_device *dev)
+{
+#if 0
+	struct drm_i915_private *dev_priv = dev->dev_private;
+#endif
+
+	if (i915_panel_ignore_lid)
+		return i915_panel_ignore_lid > 0 ?
+			connector_status_connected :
+			connector_status_disconnected;
+
+	/* opregion lid state on HP 2540p is wrong at boot up,
+	 * appears to be either the BIOS or Linux ACPI fault */
+#if 0
+	/* Assume that the BIOS does not lie through the OpRegion... */
+	if (dev_priv->opregion.lid_state)
+		return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
+			connector_status_connected :
+			connector_status_disconnected;
+#endif
+
+	return connector_status_unknown;
+}
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+static int intel_panel_update_status(struct backlight_device *bd)
+{
+	struct drm_device *dev = bl_get_data(bd);
+	intel_panel_set_backlight(dev, bd->props.brightness);
+	return 0;
+}
+
+static int intel_panel_get_brightness(struct backlight_device *bd)
+{
+	struct drm_device *dev = bl_get_data(bd);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	return dev_priv->backlight_level;
+}
+
+static const struct backlight_ops intel_panel_bl_ops = {
+	.update_status = intel_panel_update_status,
+	.get_brightness = intel_panel_get_brightness,
+};
+
+int intel_panel_setup_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct backlight_properties props;
+	struct drm_connector *connector;
+
+	intel_panel_init_backlight(dev);
+
+	if (dev_priv->int_lvds_connector)
+		connector = dev_priv->int_lvds_connector;
+	else if (dev_priv->int_edp_connector)
+		connector = dev_priv->int_edp_connector;
+	else
+		return -ENODEV;
+
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = intel_panel_get_max_backlight(dev);
+	dev_priv->backlight =
+		backlight_device_register("intel_backlight",
+					  &connector->kdev, dev,
+					  &intel_panel_bl_ops, &props);
+
+	if (IS_ERR(dev_priv->backlight)) {
+		DRM_ERROR("Failed to register backlight: %ld\n",
+			  PTR_ERR(dev_priv->backlight));
+		dev_priv->backlight = NULL;
+		return -ENODEV;
+	}
+	dev_priv->backlight->props.brightness = intel_panel_get_backlight(dev);
+	return 0;
+}
+
+void intel_panel_destroy_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	if (dev_priv->backlight)
+		backlight_device_unregister(dev_priv->backlight);
+}
+#else
+int intel_panel_setup_backlight(struct drm_device *dev)
+{
+	intel_panel_init_backlight(dev);
+	return 0;
+}
+
+void intel_panel_destroy_backlight(struct drm_device *dev)
+{
+	return;
+}
+#endif
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
new file mode 100644
index 00000000..302d3d54
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -0,0 +1,1583 @@
+/*
+ * Copyright © 2008-2010 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *    Zou Nan hai <nanhai.zou@intel.com>
+ *    Xiang Hai hao<haihao.xiang@intel.com>
+ *
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drv.h"
+#include "i915_drm.h"
+#include "i915_trace.h"
+#include "intel_drv.h"
+
+/*
+ * 965+ support PIPE_CONTROL commands, which provide finer grained control
+ * over cache flushing.
+ */
+struct pipe_control {
+	struct drm_i915_gem_object *obj;
+	volatile u32 *cpu_page;
+	u32 gtt_offset;
+};
+
+static inline int ring_space(struct intel_ring_buffer *ring)
+{
+	int space = (ring->head & HEAD_ADDR) - (ring->tail + 8);
+	if (space < 0)
+		space += ring->size;
+	return space;
+}
+
+static int
+render_ring_flush(struct intel_ring_buffer *ring,
+		  u32	invalidate_domains,
+		  u32	flush_domains)
+{
+	struct drm_device *dev = ring->dev;
+	u32 cmd;
+	int ret;
+
+	/*
+	 * read/write caches:
+	 *
+	 * I915_GEM_DOMAIN_RENDER is always invalidated, but is
+	 * only flushed if MI_NO_WRITE_FLUSH is unset.  On 965, it is
+	 * also flushed at 2d versus 3d pipeline switches.
+	 *
+	 * read-only caches:
+	 *
+	 * I915_GEM_DOMAIN_SAMPLER is flushed on pre-965 if
+	 * MI_READ_FLUSH is set, and is always flushed on 965.
+	 *
+	 * I915_GEM_DOMAIN_COMMAND may not exist?
+	 *
+	 * I915_GEM_DOMAIN_INSTRUCTION, which exists on 965, is
+	 * invalidated when MI_EXE_FLUSH is set.
+	 *
+	 * I915_GEM_DOMAIN_VERTEX, which exists on 965, is
+	 * invalidated with every MI_FLUSH.
+	 *
+	 * TLBs:
+	 *
+	 * On 965, TLBs associated with I915_GEM_DOMAIN_COMMAND
+	 * and I915_GEM_DOMAIN_CPU in are invalidated at PTE write and
+	 * I915_GEM_DOMAIN_RENDER and I915_GEM_DOMAIN_SAMPLER
+	 * are flushed at any MI_FLUSH.
+	 */
+
+	cmd = MI_FLUSH | MI_NO_WRITE_FLUSH;
+	if ((invalidate_domains|flush_domains) &
+	    I915_GEM_DOMAIN_RENDER)
+		cmd &= ~MI_NO_WRITE_FLUSH;
+	if (INTEL_INFO(dev)->gen < 4) {
+		/*
+		 * On the 965, the sampler cache always gets flushed
+		 * and this bit is reserved.
+		 */
+		if (invalidate_domains & I915_GEM_DOMAIN_SAMPLER)
+			cmd |= MI_READ_FLUSH;
+	}
+	if (invalidate_domains & I915_GEM_DOMAIN_INSTRUCTION)
+		cmd |= MI_EXE_FLUSH;
+
+	if (invalidate_domains & I915_GEM_DOMAIN_COMMAND &&
+	    (IS_G4X(dev) || IS_GEN5(dev)))
+		cmd |= MI_INVALIDATE_ISP;
+
+	ret = intel_ring_begin(ring, 2);
+	if (ret)
+		return ret;
+
+	intel_ring_emit(ring, cmd);
+	intel_ring_emit(ring, MI_NOOP);
+	intel_ring_advance(ring);
+
+	return 0;
+}
+
+/**
+ * Emits a PIPE_CONTROL with a non-zero post-sync operation, for
+ * implementing two workarounds on gen6.  From section 1.4.7.1
+ * "PIPE_CONTROL" of the Sandy Bridge PRM volume 2 part 1:
+ *
+ * [DevSNB-C+{W/A}] Before any depth stall flush (including those
+ * produced by non-pipelined state commands), software needs to first
+ * send a PIPE_CONTROL with no bits set except Post-Sync Operation !=
+ * 0.
+ *
+ * [Dev-SNB{W/A}]: Before a PIPE_CONTROL with Write Cache Flush Enable
+ * =1, a PIPE_CONTROL with any non-zero post-sync-op is required.
+ *
+ * And the workaround for these two requires this workaround first:
+ *
+ * [Dev-SNB{W/A}]: Pipe-control with CS-stall bit set must be sent
+ * BEFORE the pipe-control with a post-sync op and no write-cache
+ * flushes.
+ *
+ * And this last workaround is tricky because of the requirements on
+ * that bit.  From section 1.4.7.2.3 "Stall" of the Sandy Bridge PRM
+ * volume 2 part 1:
+ *
+ *     "1 of the following must also be set:
+ *      - Render Target Cache Flush Enable ([12] of DW1)
+ *      - Depth Cache Flush Enable ([0] of DW1)
+ *      - Stall at Pixel Scoreboard ([1] of DW1)
+ *      - Depth Stall ([13] of DW1)
+ *      - Post-Sync Operation ([13] of DW1)
+ *      - Notify Enable ([8] of DW1)"
+ *
+ * The cache flushes require the workaround flush that triggered this
+ * one, so we can't use it.  Depth stall would trigger the same.
+ * Post-sync nonzero is what triggered this second workaround, so we
+ * can't use that one either.  Notify enable is IRQs, which aren't
+ * really our business.  That leaves only stall at scoreboard.
+ */
+static int
+intel_emit_post_sync_nonzero_flush(struct intel_ring_buffer *ring)
+{
+	struct pipe_control *pc = ring->private;
+	u32 scratch_addr = pc->gtt_offset + 128;
+	int ret;
+
+
+	ret = intel_ring_begin(ring, 6);
+	if (ret)
+		return ret;
+
+	intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(5));
+	intel_ring_emit(ring, PIPE_CONTROL_CS_STALL |
+			PIPE_CONTROL_STALL_AT_SCOREBOARD);
+	intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT); /* address */
+	intel_ring_emit(ring, 0); /* low dword */
+	intel_ring_emit(ring, 0); /* high dword */
+	intel_ring_emit(ring, MI_NOOP);
+	intel_ring_advance(ring);
+
+	ret = intel_ring_begin(ring, 6);
+	if (ret)
+		return ret;
+
+	intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(5));
+	intel_ring_emit(ring, PIPE_CONTROL_QW_WRITE);
+	intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT); /* address */
+	intel_ring_emit(ring, 0);
+	intel_ring_emit(ring, 0);
+	intel_ring_emit(ring, MI_NOOP);
+	intel_ring_advance(ring);
+
+	return 0;
+}
+
+static int
+gen6_render_ring_flush(struct intel_ring_buffer *ring,
+                         u32 invalidate_domains, u32 flush_domains)
+{
+	u32 flags = 0;
+	struct pipe_control *pc = ring->private;
+	u32 scratch_addr = pc->gtt_offset + 128;
+	int ret;
+
+	/* Force SNB workarounds for PIPE_CONTROL flushes */
+	intel_emit_post_sync_nonzero_flush(ring);
+
+	/* Just flush everything.  Experiments have shown that reducing the
+	 * number of bits based on the write domains has little performance
+	 * impact.
+	 */
+	flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
+	flags |= PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE;
+	flags |= PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE;
+	flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+	flags |= PIPE_CONTROL_VF_CACHE_INVALIDATE;
+	flags |= PIPE_CONTROL_CONST_CACHE_INVALIDATE;
+	flags |= PIPE_CONTROL_STATE_CACHE_INVALIDATE;
+
+	ret = intel_ring_begin(ring, 6);
+	if (ret)
+		return ret;
+
+	intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(5));
+	intel_ring_emit(ring, flags);
+	intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT);
+	intel_ring_emit(ring, 0); /* lower dword */
+	intel_ring_emit(ring, 0); /* uppwer dword */
+	intel_ring_emit(ring, MI_NOOP);
+	intel_ring_advance(ring);
+
+	return 0;
+}
+
+static void ring_write_tail(struct intel_ring_buffer *ring,
+			    u32 value)
+{
+	drm_i915_private_t *dev_priv = ring->dev->dev_private;
+	I915_WRITE_TAIL(ring, value);
+}
+
+u32 intel_ring_get_active_head(struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = ring->dev->dev_private;
+	u32 acthd_reg = INTEL_INFO(ring->dev)->gen >= 4 ?
+			RING_ACTHD(ring->mmio_base) : ACTHD;
+
+	return I915_READ(acthd_reg);
+}
+
+static int init_ring_common(struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = ring->dev->dev_private;
+	struct drm_i915_gem_object *obj = ring->obj;
+	u32 head;
+
+	/* Stop the ring if it's running. */
+	I915_WRITE_CTL(ring, 0);
+	I915_WRITE_HEAD(ring, 0);
+	ring->write_tail(ring, 0);
+
+	/* Initialize the ring. */
+	I915_WRITE_START(ring, obj->gtt_offset);
+	head = I915_READ_HEAD(ring) & HEAD_ADDR;
+
+	/* G45 ring initialization fails to reset head to zero */
+	if (head != 0) {
+		DRM_DEBUG_KMS("%s head not reset to zero "
+			      "ctl %08x head %08x tail %08x start %08x\n",
+			      ring->name,
+			      I915_READ_CTL(ring),
+			      I915_READ_HEAD(ring),
+			      I915_READ_TAIL(ring),
+			      I915_READ_START(ring));
+
+		I915_WRITE_HEAD(ring, 0);
+
+		if (I915_READ_HEAD(ring) & HEAD_ADDR) {
+			DRM_ERROR("failed to set %s head to zero "
+				  "ctl %08x head %08x tail %08x start %08x\n",
+				  ring->name,
+				  I915_READ_CTL(ring),
+				  I915_READ_HEAD(ring),
+				  I915_READ_TAIL(ring),
+				  I915_READ_START(ring));
+		}
+	}
+
+	I915_WRITE_CTL(ring,
+			((ring->size - PAGE_SIZE) & RING_NR_PAGES)
+			| RING_VALID);
+
+	/* If the head is still not zero, the ring is dead */
+	if ((I915_READ_CTL(ring) & RING_VALID) == 0 ||
+	    I915_READ_START(ring) != obj->gtt_offset ||
+	    (I915_READ_HEAD(ring) & HEAD_ADDR) != 0) {
+		DRM_ERROR("%s initialization failed "
+				"ctl %08x head %08x tail %08x start %08x\n",
+				ring->name,
+				I915_READ_CTL(ring),
+				I915_READ_HEAD(ring),
+				I915_READ_TAIL(ring),
+				I915_READ_START(ring));
+		return -EIO;
+	}
+
+	if (!drm_core_check_feature(ring->dev, DRIVER_MODESET))
+		i915_kernel_lost_context(ring->dev);
+	else {
+		ring->head = I915_READ_HEAD(ring);
+		ring->tail = I915_READ_TAIL(ring) & TAIL_ADDR;
+		ring->space = ring_space(ring);
+		ring->last_retired_head = -1;
+	}
+
+	return 0;
+}
+
+static int
+init_pipe_control(struct intel_ring_buffer *ring)
+{
+	struct pipe_control *pc;
+	struct drm_i915_gem_object *obj;
+	int ret;
+
+	if (ring->private)
+		return 0;
+
+	pc = kmalloc(sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	obj = i915_gem_alloc_object(ring->dev, 4096);
+	if (obj == NULL) {
+		DRM_ERROR("Failed to allocate seqno page\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	i915_gem_object_set_cache_level(obj, I915_CACHE_LLC);
+
+	ret = i915_gem_object_pin(obj, 4096, true);
+	if (ret)
+		goto err_unref;
+
+	pc->gtt_offset = obj->gtt_offset;
+	pc->cpu_page =  kmap(obj->pages[0]);
+	if (pc->cpu_page == NULL)
+		goto err_unpin;
+
+	pc->obj = obj;
+	ring->private = pc;
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err_unref:
+	drm_gem_object_unreference(&obj->base);
+err:
+	kfree(pc);
+	return ret;
+}
+
+static void
+cleanup_pipe_control(struct intel_ring_buffer *ring)
+{
+	struct pipe_control *pc = ring->private;
+	struct drm_i915_gem_object *obj;
+
+	if (!ring->private)
+		return;
+
+	obj = pc->obj;
+	kunmap(obj->pages[0]);
+	i915_gem_object_unpin(obj);
+	drm_gem_object_unreference(&obj->base);
+
+	kfree(pc);
+	ring->private = NULL;
+}
+
+static int init_render_ring(struct intel_ring_buffer *ring)
+{
+	struct drm_device *dev = ring->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret = init_ring_common(ring);
+
+	if (INTEL_INFO(dev)->gen > 3) {
+		int mode = VS_TIMER_DISPATCH << 16 | VS_TIMER_DISPATCH;
+		I915_WRITE(MI_MODE, mode);
+		if (IS_GEN7(dev))
+			I915_WRITE(GFX_MODE_GEN7,
+				   GFX_MODE_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) |
+				   GFX_MODE_ENABLE(GFX_REPLAY_MODE));
+	}
+
+	if (INTEL_INFO(dev)->gen >= 5) {
+		ret = init_pipe_control(ring);
+		if (ret)
+			return ret;
+	}
+
+
+	if (IS_GEN6(dev)) {
+		/* From the Sandybridge PRM, volume 1 part 3, page 24:
+		 * "If this bit is set, STCunit will have LRA as replacement
+		 *  policy. [...] This bit must be reset.  LRA replacement
+		 *  policy is not supported."
+		 */
+		I915_WRITE(CACHE_MODE_0,
+			   CM0_STC_EVICT_DISABLE_LRA_SNB << CM0_MASK_SHIFT);
+	}
+
+	if (INTEL_INFO(dev)->gen >= 6) {
+		I915_WRITE(INSTPM,
+			   INSTPM_FORCE_ORDERING << 16 | INSTPM_FORCE_ORDERING);
+	}
+
+	return ret;
+}
+
+static void render_ring_cleanup(struct intel_ring_buffer *ring)
+{
+	if (!ring->private)
+		return;
+
+	cleanup_pipe_control(ring);
+}
+
+static void
+update_mboxes(struct intel_ring_buffer *ring,
+	    u32 seqno,
+	    u32 mmio_offset)
+{
+	intel_ring_emit(ring, MI_SEMAPHORE_MBOX |
+			      MI_SEMAPHORE_GLOBAL_GTT |
+			      MI_SEMAPHORE_REGISTER |
+			      MI_SEMAPHORE_UPDATE);
+	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, mmio_offset);
+}
+
+/**
+ * gen6_add_request - Update the semaphore mailbox registers
+ * 
+ * @ring - ring that is adding a request
+ * @seqno - return seqno stuck into the ring
+ *
+ * Update the mailbox registers in the *other* rings with the current seqno.
+ * This acts like a signal in the canonical semaphore.
+ */
+static int
+gen6_add_request(struct intel_ring_buffer *ring,
+		 u32 *seqno)
+{
+	u32 mbox1_reg;
+	u32 mbox2_reg;
+	int ret;
+
+	ret = intel_ring_begin(ring, 10);
+	if (ret)
+		return ret;
+
+	mbox1_reg = ring->signal_mbox[0];
+	mbox2_reg = ring->signal_mbox[1];
+
+	*seqno = i915_gem_next_request_seqno(ring);
+
+	update_mboxes(ring, *seqno, mbox1_reg);
+	update_mboxes(ring, *seqno, mbox2_reg);
+	intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
+	intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+	intel_ring_emit(ring, *seqno);
+	intel_ring_emit(ring, MI_USER_INTERRUPT);
+	intel_ring_advance(ring);
+
+	return 0;
+}
+
+/**
+ * intel_ring_sync - sync the waiter to the signaller on seqno
+ *
+ * @waiter - ring that is waiting
+ * @signaller - ring which has, or will signal
+ * @seqno - seqno which the waiter will block on
+ */
+static int
+intel_ring_sync(struct intel_ring_buffer *waiter,
+		struct intel_ring_buffer *signaller,
+		int ring,
+		u32 seqno)
+{
+	int ret;
+	u32 dw1 = MI_SEMAPHORE_MBOX |
+		  MI_SEMAPHORE_COMPARE |
+		  MI_SEMAPHORE_REGISTER;
+
+	ret = intel_ring_begin(waiter, 4);
+	if (ret)
+		return ret;
+
+	intel_ring_emit(waiter, dw1 | signaller->semaphore_register[ring]);
+	intel_ring_emit(waiter, seqno);
+	intel_ring_emit(waiter, 0);
+	intel_ring_emit(waiter, MI_NOOP);
+	intel_ring_advance(waiter);
+
+	return 0;
+}
+
+/* VCS->RCS (RVSYNC) or BCS->RCS (RBSYNC) */
+int
+render_ring_sync_to(struct intel_ring_buffer *waiter,
+		    struct intel_ring_buffer *signaller,
+		    u32 seqno)
+{
+	WARN_ON(signaller->semaphore_register[RCS] == MI_SEMAPHORE_SYNC_INVALID);
+	return intel_ring_sync(waiter,
+			       signaller,
+			       RCS,
+			       seqno);
+}
+
+/* RCS->VCS (VRSYNC) or BCS->VCS (VBSYNC) */
+int
+gen6_bsd_ring_sync_to(struct intel_ring_buffer *waiter,
+		      struct intel_ring_buffer *signaller,
+		      u32 seqno)
+{
+	WARN_ON(signaller->semaphore_register[VCS] == MI_SEMAPHORE_SYNC_INVALID);
+	return intel_ring_sync(waiter,
+			       signaller,
+			       VCS,
+			       seqno);
+}
+
+/* RCS->BCS (BRSYNC) or VCS->BCS (BVSYNC) */
+int
+gen6_blt_ring_sync_to(struct intel_ring_buffer *waiter,
+		      struct intel_ring_buffer *signaller,
+		      u32 seqno)
+{
+	WARN_ON(signaller->semaphore_register[BCS] == MI_SEMAPHORE_SYNC_INVALID);
+	return intel_ring_sync(waiter,
+			       signaller,
+			       BCS,
+			       seqno);
+}
+
+
+
+#define PIPE_CONTROL_FLUSH(ring__, addr__)					\
+do {									\
+	intel_ring_emit(ring__, GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE |		\
+		 PIPE_CONTROL_DEPTH_STALL);				\
+	intel_ring_emit(ring__, (addr__) | PIPE_CONTROL_GLOBAL_GTT);			\
+	intel_ring_emit(ring__, 0);							\
+	intel_ring_emit(ring__, 0);							\
+} while (0)
+
+static int
+pc_render_add_request(struct intel_ring_buffer *ring,
+		      u32 *result)
+{
+	u32 seqno = i915_gem_next_request_seqno(ring);
+	struct pipe_control *pc = ring->private;
+	u32 scratch_addr = pc->gtt_offset + 128;
+	int ret;
+
+	/* For Ironlake, MI_USER_INTERRUPT was deprecated and apparently
+	 * incoherent with writes to memory, i.e. completely fubar,
+	 * so we need to use PIPE_NOTIFY instead.
+	 *
+	 * However, we also need to workaround the qword write
+	 * incoherence by flushing the 6 PIPE_NOTIFY buffers out to
+	 * memory before requesting an interrupt.
+	 */
+	ret = intel_ring_begin(ring, 32);
+	if (ret)
+		return ret;
+
+	intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE |
+			PIPE_CONTROL_WRITE_FLUSH |
+			PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE);
+	intel_ring_emit(ring, pc->gtt_offset | PIPE_CONTROL_GLOBAL_GTT);
+	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, 0);
+	PIPE_CONTROL_FLUSH(ring, scratch_addr);
+	scratch_addr += 128; /* write to separate cachelines */
+	PIPE_CONTROL_FLUSH(ring, scratch_addr);
+	scratch_addr += 128;
+	PIPE_CONTROL_FLUSH(ring, scratch_addr);
+	scratch_addr += 128;
+	PIPE_CONTROL_FLUSH(ring, scratch_addr);
+	scratch_addr += 128;
+	PIPE_CONTROL_FLUSH(ring, scratch_addr);
+	scratch_addr += 128;
+	PIPE_CONTROL_FLUSH(ring, scratch_addr);
+
+	intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE |
+			PIPE_CONTROL_WRITE_FLUSH |
+			PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE |
+			PIPE_CONTROL_NOTIFY);
+	intel_ring_emit(ring, pc->gtt_offset | PIPE_CONTROL_GLOBAL_GTT);
+	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, 0);
+	intel_ring_advance(ring);
+
+	*result = seqno;
+	return 0;
+}
+
+static int
+render_ring_add_request(struct intel_ring_buffer *ring,
+			u32 *result)
+{
+	u32 seqno = i915_gem_next_request_seqno(ring);
+	int ret;
+
+	ret = intel_ring_begin(ring, 4);
+	if (ret)
+		return ret;
+
+	intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
+	intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, MI_USER_INTERRUPT);
+	intel_ring_advance(ring);
+
+	*result = seqno;
+	return 0;
+}
+
+static u32
+gen6_ring_get_seqno(struct intel_ring_buffer *ring)
+{
+	struct drm_device *dev = ring->dev;
+
+	/* Workaround to force correct ordering between irq and seqno writes on
+	 * ivb (and maybe also on snb) by reading from a CS register (like
+	 * ACTHD) before reading the status page. */
+	if (IS_GEN6(dev) || IS_GEN7(dev))
+		intel_ring_get_active_head(ring);
+	return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
+}
+
+static u32
+ring_get_seqno(struct intel_ring_buffer *ring)
+{
+	return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
+}
+
+static u32
+pc_render_get_seqno(struct intel_ring_buffer *ring)
+{
+	struct pipe_control *pc = ring->private;
+	return pc->cpu_page[0];
+}
+
+static void
+ironlake_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	dev_priv->gt_irq_mask &= ~mask;
+	I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+	POSTING_READ(GTIMR);
+}
+
+static void
+ironlake_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	dev_priv->gt_irq_mask |= mask;
+	I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+	POSTING_READ(GTIMR);
+}
+
+static void
+i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	dev_priv->irq_mask &= ~mask;
+	I915_WRITE(IMR, dev_priv->irq_mask);
+	POSTING_READ(IMR);
+}
+
+static void
+i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+	dev_priv->irq_mask |= mask;
+	I915_WRITE(IMR, dev_priv->irq_mask);
+	POSTING_READ(IMR);
+}
+
+static bool
+render_ring_get_irq(struct intel_ring_buffer *ring)
+{
+	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (!dev->irq_enabled)
+		return false;
+
+	spin_lock(&ring->irq_lock);
+	if (ring->irq_refcount++ == 0) {
+		if (HAS_PCH_SPLIT(dev))
+			ironlake_enable_irq(dev_priv,
+					    GT_PIPE_NOTIFY | GT_USER_INTERRUPT);
+		else
+			i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
+	}
+	spin_unlock(&ring->irq_lock);
+
+	return true;
+}
+
+static void
+render_ring_put_irq(struct intel_ring_buffer *ring)
+{
+	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	spin_lock(&ring->irq_lock);
+	if (--ring->irq_refcount == 0) {
+		if (HAS_PCH_SPLIT(dev))
+			ironlake_disable_irq(dev_priv,
+					     GT_USER_INTERRUPT |
+					     GT_PIPE_NOTIFY);
+		else
+			i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
+	}
+	spin_unlock(&ring->irq_lock);
+}
+
+void intel_ring_setup_status_page(struct intel_ring_buffer *ring)
+{
+	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = ring->dev->dev_private;
+	u32 mmio = 0;
+
+	/* The ring status page addresses are no longer next to the rest of
+	 * the ring registers as of gen7.
+	 */
+	if (IS_GEN7(dev)) {
+		switch (ring->id) {
+		case RCS:
+			mmio = RENDER_HWS_PGA_GEN7;
+			break;
+		case BCS:
+			mmio = BLT_HWS_PGA_GEN7;
+			break;
+		case VCS:
+			mmio = BSD_HWS_PGA_GEN7;
+			break;
+		}
+	} else if (IS_GEN6(ring->dev)) {
+		mmio = RING_HWS_PGA_GEN6(ring->mmio_base);
+	} else {
+		mmio = RING_HWS_PGA(ring->mmio_base);
+	}
+
+	I915_WRITE(mmio, (u32)ring->status_page.gfx_addr);
+	POSTING_READ(mmio);
+}
+
+static int
+bsd_ring_flush(struct intel_ring_buffer *ring,
+	       u32     invalidate_domains,
+	       u32     flush_domains)
+{
+	int ret;
+
+	ret = intel_ring_begin(ring, 2);
+	if (ret)
+		return ret;
+
+	intel_ring_emit(ring, MI_FLUSH);
+	intel_ring_emit(ring, MI_NOOP);
+	intel_ring_advance(ring);
+	return 0;
+}
+
+static int
+ring_add_request(struct intel_ring_buffer *ring,
+		 u32 *result)
+{
+	u32 seqno;
+	int ret;
+
+	ret = intel_ring_begin(ring, 4);
+	if (ret)
+		return ret;
+
+	seqno = i915_gem_next_request_seqno(ring);
+
+	intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
+	intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+	intel_ring_emit(ring, seqno);
+	intel_ring_emit(ring, MI_USER_INTERRUPT);
+	intel_ring_advance(ring);
+
+	*result = seqno;
+	return 0;
+}
+
+static bool
+gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
+{
+	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (!dev->irq_enabled)
+	       return false;
+
+	/* It looks like we need to prevent the gt from suspending while waiting
+	 * for an notifiy irq, otherwise irqs seem to get lost on at least the
+	 * blt/bsd rings on ivb. */
+	gen6_gt_force_wake_get(dev_priv);
+
+	spin_lock(&ring->irq_lock);
+	if (ring->irq_refcount++ == 0) {
+		ring->irq_mask &= ~rflag;
+		I915_WRITE_IMR(ring, ring->irq_mask);
+		ironlake_enable_irq(dev_priv, gflag);
+	}
+	spin_unlock(&ring->irq_lock);
+
+	return true;
+}
+
+static void
+gen6_ring_put_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
+{
+	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	spin_lock(&ring->irq_lock);
+	if (--ring->irq_refcount == 0) {
+		ring->irq_mask |= rflag;
+		I915_WRITE_IMR(ring, ring->irq_mask);
+		ironlake_disable_irq(dev_priv, gflag);
+	}
+	spin_unlock(&ring->irq_lock);
+
+	gen6_gt_force_wake_put(dev_priv);
+}
+
+static bool
+bsd_ring_get_irq(struct intel_ring_buffer *ring)
+{
+	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (!dev->irq_enabled)
+		return false;
+
+	spin_lock(&ring->irq_lock);
+	if (ring->irq_refcount++ == 0) {
+		if (IS_G4X(dev))
+			i915_enable_irq(dev_priv, I915_BSD_USER_INTERRUPT);
+		else
+			ironlake_enable_irq(dev_priv, GT_BSD_USER_INTERRUPT);
+	}
+	spin_unlock(&ring->irq_lock);
+
+	return true;
+}
+static void
+bsd_ring_put_irq(struct intel_ring_buffer *ring)
+{
+	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	spin_lock(&ring->irq_lock);
+	if (--ring->irq_refcount == 0) {
+		if (IS_G4X(dev))
+			i915_disable_irq(dev_priv, I915_BSD_USER_INTERRUPT);
+		else
+			ironlake_disable_irq(dev_priv, GT_BSD_USER_INTERRUPT);
+	}
+	spin_unlock(&ring->irq_lock);
+}
+
+static int
+ring_dispatch_execbuffer(struct intel_ring_buffer *ring, u32 offset, u32 length)
+{
+	int ret;
+
+	ret = intel_ring_begin(ring, 2);
+	if (ret)
+		return ret;
+
+	intel_ring_emit(ring,
+			MI_BATCH_BUFFER_START | (2 << 6) |
+			MI_BATCH_NON_SECURE_I965);
+	intel_ring_emit(ring, offset);
+	intel_ring_advance(ring);
+
+	return 0;
+}
+
+static int
+render_ring_dispatch_execbuffer(struct intel_ring_buffer *ring,
+				u32 offset, u32 len)
+{
+	struct drm_device *dev = ring->dev;
+	int ret;
+
+	if (IS_I830(dev) || IS_845G(dev)) {
+		ret = intel_ring_begin(ring, 4);
+		if (ret)
+			return ret;
+
+		intel_ring_emit(ring, MI_BATCH_BUFFER);
+		intel_ring_emit(ring, offset | MI_BATCH_NON_SECURE);
+		intel_ring_emit(ring, offset + len - 8);
+		intel_ring_emit(ring, 0);
+	} else {
+		ret = intel_ring_begin(ring, 2);
+		if (ret)
+			return ret;
+
+		if (INTEL_INFO(dev)->gen >= 4) {
+			intel_ring_emit(ring,
+					MI_BATCH_BUFFER_START | (2 << 6) |
+					MI_BATCH_NON_SECURE_I965);
+			intel_ring_emit(ring, offset);
+		} else {
+			intel_ring_emit(ring,
+					MI_BATCH_BUFFER_START | (2 << 6));
+			intel_ring_emit(ring, offset | MI_BATCH_NON_SECURE);
+		}
+	}
+	intel_ring_advance(ring);
+
+	return 0;
+}
+
+static void cleanup_status_page(struct intel_ring_buffer *ring)
+{
+	drm_i915_private_t *dev_priv = ring->dev->dev_private;
+	struct drm_i915_gem_object *obj;
+
+	obj = ring->status_page.obj;
+	if (obj == NULL)
+		return;
+
+	kunmap(obj->pages[0]);
+	i915_gem_object_unpin(obj);
+	drm_gem_object_unreference(&obj->base);
+	ring->status_page.obj = NULL;
+
+	memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+}
+
+static int init_status_page(struct intel_ring_buffer *ring)
+{
+	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj;
+	int ret;
+
+	obj = i915_gem_alloc_object(dev, 4096);
+	if (obj == NULL) {
+		DRM_ERROR("Failed to allocate status page\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	i915_gem_object_set_cache_level(obj, I915_CACHE_LLC);
+
+	ret = i915_gem_object_pin(obj, 4096, true);
+	if (ret != 0) {
+		goto err_unref;
+	}
+
+	ring->status_page.gfx_addr = obj->gtt_offset;
+	ring->status_page.page_addr = kmap(obj->pages[0]);
+	if (ring->status_page.page_addr == NULL) {
+		memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+		goto err_unpin;
+	}
+	ring->status_page.obj = obj;
+	memset(ring->status_page.page_addr, 0, PAGE_SIZE);
+
+	intel_ring_setup_status_page(ring);
+	DRM_DEBUG_DRIVER("%s hws offset: 0x%08x\n",
+			ring->name, ring->status_page.gfx_addr);
+
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err_unref:
+	drm_gem_object_unreference(&obj->base);
+err:
+	return ret;
+}
+
+int intel_init_ring_buffer(struct drm_device *dev,
+			   struct intel_ring_buffer *ring)
+{
+	struct drm_i915_gem_object *obj;
+	int ret;
+
+	ring->dev = dev;
+	INIT_LIST_HEAD(&ring->active_list);
+	INIT_LIST_HEAD(&ring->request_list);
+	INIT_LIST_HEAD(&ring->gpu_write_list);
+
+	init_waitqueue_head(&ring->irq_queue);
+	spin_lock_init(&ring->irq_lock);
+	ring->irq_mask = ~0;
+
+	if (I915_NEED_GFX_HWS(dev)) {
+		ret = init_status_page(ring);
+		if (ret)
+			return ret;
+	}
+
+	obj = i915_gem_alloc_object(dev, ring->size);
+	if (obj == NULL) {
+		DRM_ERROR("Failed to allocate ringbuffer\n");
+		ret = -ENOMEM;
+		goto err_hws;
+	}
+
+	ring->obj = obj;
+
+	ret = i915_gem_object_pin(obj, PAGE_SIZE, true);
+	if (ret)
+		goto err_unref;
+
+	ret = i915_gem_object_set_to_gtt_domain(obj, true);
+	if (ret)
+		goto err_unpin;
+
+	ring->map.size = ring->size;
+	ring->map.offset = dev->agp->base + obj->gtt_offset;
+	ring->map.type = 0;
+	ring->map.flags = 0;
+	ring->map.mtrr = 0;
+
+	drm_core_ioremap_wc(&ring->map, dev);
+	if (ring->map.handle == NULL) {
+		DRM_ERROR("Failed to map ringbuffer.\n");
+		ret = -EINVAL;
+		goto err_unpin;
+	}
+
+	ring->virtual_start = ring->map.handle;
+	ret = ring->init(ring);
+	if (ret)
+		goto err_unmap;
+
+	/* Workaround an erratum on the i830 which causes a hang if
+	 * the TAIL pointer points to within the last 2 cachelines
+	 * of the buffer.
+	 */
+	ring->effective_size = ring->size;
+	if (IS_I830(ring->dev) || IS_845G(ring->dev))
+		ring->effective_size -= 128;
+
+	return 0;
+
+err_unmap:
+	drm_core_ioremapfree(&ring->map, dev);
+err_unpin:
+	i915_gem_object_unpin(obj);
+err_unref:
+	drm_gem_object_unreference(&obj->base);
+	ring->obj = NULL;
+err_hws:
+	cleanup_status_page(ring);
+	return ret;
+}
+
+void intel_cleanup_ring_buffer(struct intel_ring_buffer *ring)
+{
+	struct drm_i915_private *dev_priv;
+	int ret;
+
+	if (ring->obj == NULL)
+		return;
+
+	/* Disable the ring buffer. The ring must be idle at this point */
+	dev_priv = ring->dev->dev_private;
+	ret = intel_wait_ring_idle(ring);
+	if (ret)
+		DRM_ERROR("failed to quiesce %s whilst cleaning up: %d\n",
+			  ring->name, ret);
+
+	I915_WRITE_CTL(ring, 0);
+
+	drm_core_ioremapfree(&ring->map, ring->dev);
+
+	i915_gem_object_unpin(ring->obj);
+	drm_gem_object_unreference(&ring->obj->base);
+	ring->obj = NULL;
+
+	if (ring->cleanup)
+		ring->cleanup(ring);
+
+	cleanup_status_page(ring);
+}
+
+static int intel_wrap_ring_buffer(struct intel_ring_buffer *ring)
+{
+	unsigned int *virt;
+	int rem = ring->size - ring->tail;
+
+	if (ring->space < rem) {
+		int ret = intel_wait_ring_buffer(ring, rem);
+		if (ret)
+			return ret;
+	}
+
+	virt = (unsigned int *)(ring->virtual_start + ring->tail);
+	rem /= 8;
+	while (rem--) {
+		*virt++ = MI_NOOP;
+		*virt++ = MI_NOOP;
+	}
+
+	ring->tail = 0;
+	ring->space = ring_space(ring);
+
+	return 0;
+}
+
+static int intel_ring_wait_seqno(struct intel_ring_buffer *ring, u32 seqno)
+{
+	struct drm_i915_private *dev_priv = ring->dev->dev_private;
+	bool was_interruptible;
+	int ret;
+
+	/* XXX As we have not yet audited all the paths to check that
+	 * they are ready for ERESTARTSYS from intel_ring_begin, do not
+	 * allow us to be interruptible by a signal.
+	 */
+	was_interruptible = dev_priv->mm.interruptible;
+	dev_priv->mm.interruptible = false;
+
+	ret = i915_wait_request(ring, seqno, true);
+
+	dev_priv->mm.interruptible = was_interruptible;
+
+	return ret;
+}
+
+static int intel_ring_wait_request(struct intel_ring_buffer *ring, int n)
+{
+	struct drm_i915_gem_request *request;
+	u32 seqno = 0;
+	int ret;
+
+	i915_gem_retire_requests_ring(ring);
+
+	if (ring->last_retired_head != -1) {
+		ring->head = ring->last_retired_head;
+		ring->last_retired_head = -1;
+		ring->space = ring_space(ring);
+		if (ring->space >= n)
+			return 0;
+	}
+
+	list_for_each_entry(request, &ring->request_list, list) {
+		int space;
+
+		if (request->tail == -1)
+			continue;
+
+		space = request->tail - (ring->tail + 8);
+		if (space < 0)
+			space += ring->size;
+		if (space >= n) {
+			seqno = request->seqno;
+			break;
+		}
+
+		/* Consume this request in case we need more space than
+		 * is available and so need to prevent a race between
+		 * updating last_retired_head and direct reads of
+		 * I915_RING_HEAD. It also provides a nice sanity check.
+		 */
+		request->tail = -1;
+	}
+
+	if (seqno == 0)
+		return -ENOSPC;
+
+	ret = intel_ring_wait_seqno(ring, seqno);
+	if (ret)
+		return ret;
+
+	if (WARN_ON(ring->last_retired_head == -1))
+		return -ENOSPC;
+
+	ring->head = ring->last_retired_head;
+	ring->last_retired_head = -1;
+	ring->space = ring_space(ring);
+	if (WARN_ON(ring->space < n))
+		return -ENOSPC;
+
+	return 0;
+}
+
+int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n)
+{
+	struct drm_device *dev = ring->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long end;
+	int ret;
+
+	ret = intel_ring_wait_request(ring, n);
+	if (ret != -ENOSPC)
+		return ret;
+
+	trace_i915_ring_wait_begin(ring);
+	if (drm_core_check_feature(dev, DRIVER_GEM))
+		/* With GEM the hangcheck timer should kick us out of the loop,
+		 * leaving it early runs the risk of corrupting GEM state (due
+		 * to running on almost untested codepaths). But on resume
+		 * timers don't work yet, so prevent a complete hang in that
+		 * case by choosing an insanely large timeout. */
+		end = jiffies + 60 * HZ;
+	else
+		end = jiffies + 3 * HZ;
+
+	do {
+		ring->head = I915_READ_HEAD(ring);
+		ring->space = ring_space(ring);
+		if (ring->space >= n) {
+			trace_i915_ring_wait_end(ring);
+			return 0;
+		}
+
+		if (dev->primary->master) {
+			struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
+			if (master_priv->sarea_priv)
+				master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
+		}
+
+		msleep(1);
+		if (atomic_read(&dev_priv->mm.wedged))
+			return -EAGAIN;
+	} while (!time_after(jiffies, end));
+	trace_i915_ring_wait_end(ring);
+	return -EBUSY;
+}
+
+int intel_ring_begin(struct intel_ring_buffer *ring,
+		     int num_dwords)
+{
+	struct drm_i915_private *dev_priv = ring->dev->dev_private;
+	int n = 4*num_dwords;
+	int ret;
+
+	if (unlikely(atomic_read(&dev_priv->mm.wedged)))
+		return -EIO;
+
+	if (unlikely(ring->tail + n > ring->effective_size)) {
+		ret = intel_wrap_ring_buffer(ring);
+		if (unlikely(ret))
+			return ret;
+	}
+
+	if (unlikely(ring->space < n)) {
+		ret = intel_wait_ring_buffer(ring, n);
+		if (unlikely(ret))
+			return ret;
+	}
+
+	ring->space -= n;
+	return 0;
+}
+
+void intel_ring_advance(struct intel_ring_buffer *ring)
+{
+	ring->tail &= ring->size - 1;
+	ring->write_tail(ring, ring->tail);
+}
+
+static const struct intel_ring_buffer render_ring = {
+	.name			= "render ring",
+	.id			= RCS,
+	.mmio_base		= RENDER_RING_BASE,
+	.size			= 32 * PAGE_SIZE,
+	.init			= init_render_ring,
+	.write_tail		= ring_write_tail,
+	.flush			= render_ring_flush,
+	.add_request		= render_ring_add_request,
+	.get_seqno		= ring_get_seqno,
+	.irq_get		= render_ring_get_irq,
+	.irq_put		= render_ring_put_irq,
+	.dispatch_execbuffer	= render_ring_dispatch_execbuffer,
+	.cleanup		= render_ring_cleanup,
+	.sync_to		= render_ring_sync_to,
+	.semaphore_register	= {MI_SEMAPHORE_SYNC_INVALID,
+				   MI_SEMAPHORE_SYNC_RV,
+				   MI_SEMAPHORE_SYNC_RB},
+	.signal_mbox		= {GEN6_VRSYNC, GEN6_BRSYNC},
+};
+
+/* ring buffer for bit-stream decoder */
+
+static const struct intel_ring_buffer bsd_ring = {
+	.name                   = "bsd ring",
+	.id			= VCS,
+	.mmio_base		= BSD_RING_BASE,
+	.size			= 32 * PAGE_SIZE,
+	.init			= init_ring_common,
+	.write_tail		= ring_write_tail,
+	.flush			= bsd_ring_flush,
+	.add_request		= ring_add_request,
+	.get_seqno		= ring_get_seqno,
+	.irq_get		= bsd_ring_get_irq,
+	.irq_put		= bsd_ring_put_irq,
+	.dispatch_execbuffer	= ring_dispatch_execbuffer,
+};
+
+
+static void gen6_bsd_ring_write_tail(struct intel_ring_buffer *ring,
+				     u32 value)
+{
+	drm_i915_private_t *dev_priv = ring->dev->dev_private;
+
+       /* Every tail move must follow the sequence below */
+	I915_WRITE(GEN6_BSD_SLEEP_PSMI_CONTROL,
+		GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK |
+		GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_DISABLE);
+	I915_WRITE(GEN6_BSD_RNCID, 0x0);
+
+	if (wait_for((I915_READ(GEN6_BSD_SLEEP_PSMI_CONTROL) &
+		GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR) == 0,
+		50))
+	DRM_ERROR("timed out waiting for IDLE Indicator\n");
+
+	I915_WRITE_TAIL(ring, value);
+	I915_WRITE(GEN6_BSD_SLEEP_PSMI_CONTROL,
+		GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK |
+		GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE);
+}
+
+static int gen6_ring_flush(struct intel_ring_buffer *ring,
+			   u32 invalidate, u32 flush)
+{
+	uint32_t cmd;
+	int ret;
+
+	ret = intel_ring_begin(ring, 4);
+	if (ret)
+		return ret;
+
+	cmd = MI_FLUSH_DW;
+	if (invalidate & I915_GEM_GPU_DOMAINS)
+		cmd |= MI_INVALIDATE_TLB | MI_INVALIDATE_BSD;
+	intel_ring_emit(ring, cmd);
+	intel_ring_emit(ring, 0);
+	intel_ring_emit(ring, 0);
+	intel_ring_emit(ring, MI_NOOP);
+	intel_ring_advance(ring);
+	return 0;
+}
+
+static int
+gen6_ring_dispatch_execbuffer(struct intel_ring_buffer *ring,
+			      u32 offset, u32 len)
+{
+	int ret;
+
+	ret = intel_ring_begin(ring, 2);
+	if (ret)
+		return ret;
+
+	intel_ring_emit(ring, MI_BATCH_BUFFER_START | MI_BATCH_NON_SECURE_I965);
+	/* bit0-7 is the length on GEN6+ */
+	intel_ring_emit(ring, offset);
+	intel_ring_advance(ring);
+
+	return 0;
+}
+
+static bool
+gen6_render_ring_get_irq(struct intel_ring_buffer *ring)
+{
+	return gen6_ring_get_irq(ring,
+				 GT_USER_INTERRUPT,
+				 GEN6_RENDER_USER_INTERRUPT);
+}
+
+static void
+gen6_render_ring_put_irq(struct intel_ring_buffer *ring)
+{
+	return gen6_ring_put_irq(ring,
+				 GT_USER_INTERRUPT,
+				 GEN6_RENDER_USER_INTERRUPT);
+}
+
+static bool
+gen6_bsd_ring_get_irq(struct intel_ring_buffer *ring)
+{
+	return gen6_ring_get_irq(ring,
+				 GT_GEN6_BSD_USER_INTERRUPT,
+				 GEN6_BSD_USER_INTERRUPT);
+}
+
+static void
+gen6_bsd_ring_put_irq(struct intel_ring_buffer *ring)
+{
+	return gen6_ring_put_irq(ring,
+				 GT_GEN6_BSD_USER_INTERRUPT,
+				 GEN6_BSD_USER_INTERRUPT);
+}
+
+/* ring buffer for Video Codec for Gen6+ */
+static const struct intel_ring_buffer gen6_bsd_ring = {
+	.name			= "gen6 bsd ring",
+	.id			= VCS,
+	.mmio_base		= GEN6_BSD_RING_BASE,
+	.size			= 32 * PAGE_SIZE,
+	.init			= init_ring_common,
+	.write_tail		= gen6_bsd_ring_write_tail,
+	.flush			= gen6_ring_flush,
+	.add_request		= gen6_add_request,
+	.get_seqno		= gen6_ring_get_seqno,
+	.irq_get		= gen6_bsd_ring_get_irq,
+	.irq_put		= gen6_bsd_ring_put_irq,
+	.dispatch_execbuffer	= gen6_ring_dispatch_execbuffer,
+	.sync_to		= gen6_bsd_ring_sync_to,
+	.semaphore_register	= {MI_SEMAPHORE_SYNC_VR,
+				   MI_SEMAPHORE_SYNC_INVALID,
+				   MI_SEMAPHORE_SYNC_VB},
+	.signal_mbox		= {GEN6_RVSYNC, GEN6_BVSYNC},
+};
+
+/* Blitter support (SandyBridge+) */
+
+static bool
+blt_ring_get_irq(struct intel_ring_buffer *ring)
+{
+	return gen6_ring_get_irq(ring,
+				 GT_BLT_USER_INTERRUPT,
+				 GEN6_BLITTER_USER_INTERRUPT);
+}
+
+static void
+blt_ring_put_irq(struct intel_ring_buffer *ring)
+{
+	gen6_ring_put_irq(ring,
+			  GT_BLT_USER_INTERRUPT,
+			  GEN6_BLITTER_USER_INTERRUPT);
+}
+
+static int blt_ring_flush(struct intel_ring_buffer *ring,
+			  u32 invalidate, u32 flush)
+{
+	uint32_t cmd;
+	int ret;
+
+	ret = intel_ring_begin(ring, 4);
+	if (ret)
+		return ret;
+
+	cmd = MI_FLUSH_DW;
+	if (invalidate & I915_GEM_DOMAIN_RENDER)
+		cmd |= MI_INVALIDATE_TLB;
+	intel_ring_emit(ring, cmd);
+	intel_ring_emit(ring, 0);
+	intel_ring_emit(ring, 0);
+	intel_ring_emit(ring, MI_NOOP);
+	intel_ring_advance(ring);
+	return 0;
+}
+
+static const struct intel_ring_buffer gen6_blt_ring = {
+	.name			= "blt ring",
+	.id			= BCS,
+	.mmio_base		= BLT_RING_BASE,
+	.size			= 32 * PAGE_SIZE,
+	.init			= init_ring_common,
+	.write_tail		= ring_write_tail,
+	.flush			= blt_ring_flush,
+	.add_request		= gen6_add_request,
+	.get_seqno		= gen6_ring_get_seqno,
+	.irq_get		= blt_ring_get_irq,
+	.irq_put		= blt_ring_put_irq,
+	.dispatch_execbuffer	= gen6_ring_dispatch_execbuffer,
+	.sync_to		= gen6_blt_ring_sync_to,
+	.semaphore_register	= {MI_SEMAPHORE_SYNC_BR,
+				   MI_SEMAPHORE_SYNC_BV,
+				   MI_SEMAPHORE_SYNC_INVALID},
+	.signal_mbox		= {GEN6_RBSYNC, GEN6_VBSYNC},
+};
+
+int intel_init_render_ring_buffer(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
+
+	*ring = render_ring;
+	if (INTEL_INFO(dev)->gen >= 6) {
+		ring->add_request = gen6_add_request;
+		ring->flush = gen6_render_ring_flush;
+		ring->irq_get = gen6_render_ring_get_irq;
+		ring->irq_put = gen6_render_ring_put_irq;
+		ring->get_seqno = gen6_ring_get_seqno;
+	} else if (IS_GEN5(dev)) {
+		ring->add_request = pc_render_add_request;
+		ring->get_seqno = pc_render_get_seqno;
+	}
+
+	if (!I915_NEED_GFX_HWS(dev)) {
+		ring->status_page.page_addr = dev_priv->status_page_dmah->vaddr;
+		memset(ring->status_page.page_addr, 0, PAGE_SIZE);
+	}
+
+	return intel_init_ring_buffer(dev, ring);
+}
+
+int intel_render_ring_init_dri(struct drm_device *dev, u64 start, u32 size)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
+
+	*ring = render_ring;
+	if (INTEL_INFO(dev)->gen >= 6) {
+		ring->add_request = gen6_add_request;
+		ring->irq_get = gen6_render_ring_get_irq;
+		ring->irq_put = gen6_render_ring_put_irq;
+	} else if (IS_GEN5(dev)) {
+		ring->add_request = pc_render_add_request;
+		ring->get_seqno = pc_render_get_seqno;
+	}
+
+	if (!I915_NEED_GFX_HWS(dev))
+		ring->status_page.page_addr = dev_priv->status_page_dmah->vaddr;
+
+	ring->dev = dev;
+	INIT_LIST_HEAD(&ring->active_list);
+	INIT_LIST_HEAD(&ring->request_list);
+	INIT_LIST_HEAD(&ring->gpu_write_list);
+
+	ring->size = size;
+	ring->effective_size = ring->size;
+	if (IS_I830(ring->dev))
+		ring->effective_size -= 128;
+
+	ring->map.offset = start;
+	ring->map.size = size;
+	ring->map.type = 0;
+	ring->map.flags = 0;
+	ring->map.mtrr = 0;
+
+	drm_core_ioremap_wc(&ring->map, dev);
+	if (ring->map.handle == NULL) {
+		DRM_ERROR("can not ioremap virtual address for"
+			  " ring buffer\n");
+		return -ENOMEM;
+	}
+
+	ring->virtual_start = (void __force __iomem *)ring->map.handle;
+	return 0;
+}
+
+int intel_init_bsd_ring_buffer(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = &dev_priv->ring[VCS];
+
+	if (IS_GEN6(dev) || IS_GEN7(dev))
+		*ring = gen6_bsd_ring;
+	else
+		*ring = bsd_ring;
+
+	return intel_init_ring_buffer(dev, ring);
+}
+
+int intel_init_blt_ring_buffer(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
+
+	*ring = gen6_blt_ring;
+
+	return intel_init_ring_buffer(dev, ring);
+}
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
new file mode 100644
index 00000000..bc0365b8
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -0,0 +1,220 @@
+#ifndef _INTEL_RINGBUFFER_H_
+#define _INTEL_RINGBUFFER_H_
+
+struct  intel_hw_status_page {
+	u32	__iomem	*page_addr;
+	unsigned int	gfx_addr;
+	struct		drm_i915_gem_object *obj;
+};
+
+#define I915_READ_TAIL(ring) I915_READ(RING_TAIL((ring)->mmio_base))
+#define I915_WRITE_TAIL(ring, val) I915_WRITE(RING_TAIL((ring)->mmio_base), val)
+
+#define I915_READ_START(ring) I915_READ(RING_START((ring)->mmio_base))
+#define I915_WRITE_START(ring, val) I915_WRITE(RING_START((ring)->mmio_base), val)
+
+#define I915_READ_HEAD(ring)  I915_READ(RING_HEAD((ring)->mmio_base))
+#define I915_WRITE_HEAD(ring, val) I915_WRITE(RING_HEAD((ring)->mmio_base), val)
+
+#define I915_READ_CTL(ring) I915_READ(RING_CTL((ring)->mmio_base))
+#define I915_WRITE_CTL(ring, val) I915_WRITE(RING_CTL((ring)->mmio_base), val)
+
+#define I915_READ_IMR(ring) I915_READ(RING_IMR((ring)->mmio_base))
+#define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val)
+
+#define I915_READ_NOPID(ring) I915_READ(RING_NOPID((ring)->mmio_base))
+#define I915_READ_SYNC_0(ring) I915_READ(RING_SYNC_0((ring)->mmio_base))
+#define I915_READ_SYNC_1(ring) I915_READ(RING_SYNC_1((ring)->mmio_base))
+
+struct  intel_ring_buffer {
+	const char	*name;
+	enum intel_ring_id {
+		RCS = 0x0,
+		VCS,
+		BCS,
+	} id;
+#define I915_NUM_RINGS 3
+	u32		mmio_base;
+	void		__iomem *virtual_start;
+	struct		drm_device *dev;
+	struct		drm_i915_gem_object *obj;
+
+	u32		head;
+	u32		tail;
+	int		space;
+	int		size;
+	int		effective_size;
+	struct intel_hw_status_page status_page;
+
+	/** We track the position of the requests in the ring buffer, and
+	 * when each is retired we increment last_retired_head as the GPU
+	 * must have finished processing the request and so we know we
+	 * can advance the ringbuffer up to that position.
+	 *
+	 * last_retired_head is set to -1 after the value is consumed so
+	 * we can detect new retirements.
+	 */
+	u32		last_retired_head;
+
+	spinlock_t	irq_lock;
+	u32		irq_refcount;
+	u32		irq_mask;
+	u32		irq_seqno;		/* last seq seem at irq time */
+	u32		trace_irq_seqno;
+	u32		waiting_seqno;
+	u32		sync_seqno[I915_NUM_RINGS-1];
+	bool __must_check (*irq_get)(struct intel_ring_buffer *ring);
+	void		(*irq_put)(struct intel_ring_buffer *ring);
+
+	int		(*init)(struct intel_ring_buffer *ring);
+
+	void		(*write_tail)(struct intel_ring_buffer *ring,
+				      u32 value);
+	int __must_check (*flush)(struct intel_ring_buffer *ring,
+				  u32	invalidate_domains,
+				  u32	flush_domains);
+	int		(*add_request)(struct intel_ring_buffer *ring,
+				       u32 *seqno);
+	u32		(*get_seqno)(struct intel_ring_buffer *ring);
+	int		(*dispatch_execbuffer)(struct intel_ring_buffer *ring,
+					       u32 offset, u32 length);
+	void		(*cleanup)(struct intel_ring_buffer *ring);
+	int		(*sync_to)(struct intel_ring_buffer *ring,
+				   struct intel_ring_buffer *to,
+				   u32 seqno);
+
+	u32		semaphore_register[3]; /*our mbox written by others */
+	u32		signal_mbox[2]; /* mboxes this ring signals to */
+	/**
+	 * List of objects currently involved in rendering from the
+	 * ringbuffer.
+	 *
+	 * Includes buffers having the contents of their GPU caches
+	 * flushed, not necessarily primitives.  last_rendering_seqno
+	 * represents when the rendering involved will be completed.
+	 *
+	 * A reference is held on the buffer while on this list.
+	 */
+	struct list_head active_list;
+
+	/**
+	 * List of breadcrumbs associated with GPU requests currently
+	 * outstanding.
+	 */
+	struct list_head request_list;
+
+	/**
+	 * List of objects currently pending a GPU write flush.
+	 *
+	 * All elements on this list will belong to either the
+	 * active_list or flushing_list, last_rendering_seqno can
+	 * be used to differentiate between the two elements.
+	 */
+	struct list_head gpu_write_list;
+
+	/**
+	 * Do we have some not yet emitted requests outstanding?
+	 */
+	u32 outstanding_lazy_request;
+
+	wait_queue_head_t irq_queue;
+	drm_local_map_t map;
+
+	void *private;
+};
+
+static inline unsigned
+intel_ring_flag(struct intel_ring_buffer *ring)
+{
+	return 1 << ring->id;
+}
+
+static inline u32
+intel_ring_sync_index(struct intel_ring_buffer *ring,
+		      struct intel_ring_buffer *other)
+{
+	int idx;
+
+	/*
+	 * cs -> 0 = vcs, 1 = bcs
+	 * vcs -> 0 = bcs, 1 = cs,
+	 * bcs -> 0 = cs, 1 = vcs.
+	 */
+
+	idx = (other - ring) - 1;
+	if (idx < 0)
+		idx += I915_NUM_RINGS;
+
+	return idx;
+}
+
+static inline u32
+intel_read_status_page(struct intel_ring_buffer *ring,
+		       int reg)
+{
+	return ioread32(ring->status_page.page_addr + reg);
+}
+
+/**
+ * Reads a dword out of the status page, which is written to from the command
+ * queue by automatic updates, MI_REPORT_HEAD, MI_STORE_DATA_INDEX, or
+ * MI_STORE_DATA_IMM.
+ *
+ * The following dwords have a reserved meaning:
+ * 0x00: ISR copy, updated when an ISR bit not set in the HWSTAM changes.
+ * 0x04: ring 0 head pointer
+ * 0x05: ring 1 head pointer (915-class)
+ * 0x06: ring 2 head pointer (915-class)
+ * 0x10-0x1b: Context status DWords (GM45)
+ * 0x1f: Last written status offset. (GM45)
+ *
+ * The area from dword 0x20 to 0x3ff is available for driver usage.
+ */
+#define READ_HWSP(dev_priv, reg) intel_read_status_page(LP_RING(dev_priv), reg)
+#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, I915_BREADCRUMB_INDEX)
+#define I915_GEM_HWS_INDEX		0x20
+#define I915_BREADCRUMB_INDEX		0x21
+
+void intel_cleanup_ring_buffer(struct intel_ring_buffer *ring);
+
+int __must_check intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n);
+static inline int intel_wait_ring_idle(struct intel_ring_buffer *ring)
+{
+	return intel_wait_ring_buffer(ring, ring->size - 8);
+}
+
+int __must_check intel_ring_begin(struct intel_ring_buffer *ring, int n);
+
+static inline void intel_ring_emit(struct intel_ring_buffer *ring,
+				   u32 data)
+{
+	iowrite32(data, ring->virtual_start + ring->tail);
+	ring->tail += 4;
+}
+
+void intel_ring_advance(struct intel_ring_buffer *ring);
+
+u32 intel_ring_get_seqno(struct intel_ring_buffer *ring);
+
+int intel_init_render_ring_buffer(struct drm_device *dev);
+int intel_init_bsd_ring_buffer(struct drm_device *dev);
+int intel_init_blt_ring_buffer(struct drm_device *dev);
+
+u32 intel_ring_get_active_head(struct intel_ring_buffer *ring);
+void intel_ring_setup_status_page(struct intel_ring_buffer *ring);
+
+static inline u32 intel_ring_get_tail(struct intel_ring_buffer *ring)
+{
+	return ring->tail;
+}
+
+static inline void i915_trace_irq_get(struct intel_ring_buffer *ring, u32 seqno)
+{
+	if (ring->trace_irq_seqno == 0 && ring->irq_get(ring))
+		ring->trace_irq_seqno = seqno;
+}
+
+/* DRI warts */
+int intel_render_ring_init_dri(struct drm_device *dev, u64 start, u32 size);
+
+#endif /* _INTEL_RINGBUFFER_H_ */
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
new file mode 100644
index 00000000..eea58c6c
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -0,0 +1,2593 @@
+/*
+ * Copyright 2006 Dave Airlie <airlied@linux.ie>
+ * Copyright © 2006-2007 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_edid.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_sdvo_regs.h"
+
+#define SDVO_TMDS_MASK (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)
+#define SDVO_RGB_MASK  (SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1)
+#define SDVO_LVDS_MASK (SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1)
+#define SDVO_TV_MASK   (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_SVID0)
+
+#define SDVO_OUTPUT_MASK (SDVO_TMDS_MASK | SDVO_RGB_MASK | SDVO_LVDS_MASK |\
+			SDVO_TV_MASK)
+
+#define IS_TV(c)	(c->output_flag & SDVO_TV_MASK)
+#define IS_TMDS(c)	(c->output_flag & SDVO_TMDS_MASK)
+#define IS_LVDS(c)	(c->output_flag & SDVO_LVDS_MASK)
+#define IS_TV_OR_LVDS(c) (c->output_flag & (SDVO_TV_MASK | SDVO_LVDS_MASK))
+#define IS_DIGITAL(c) (c->output_flag & (SDVO_TMDS_MASK | SDVO_LVDS_MASK))
+
+
+static const char *tv_format_names[] = {
+	"NTSC_M"   , "NTSC_J"  , "NTSC_443",
+	"PAL_B"    , "PAL_D"   , "PAL_G"   ,
+	"PAL_H"    , "PAL_I"   , "PAL_M"   ,
+	"PAL_N"    , "PAL_NC"  , "PAL_60"  ,
+	"SECAM_B"  , "SECAM_D" , "SECAM_G" ,
+	"SECAM_K"  , "SECAM_K1", "SECAM_L" ,
+	"SECAM_60"
+};
+
+#define TV_FORMAT_NUM  (sizeof(tv_format_names) / sizeof(*tv_format_names))
+
+struct intel_sdvo {
+	struct intel_encoder base;
+
+	struct i2c_adapter *i2c;
+	u8 slave_addr;
+
+	struct i2c_adapter ddc;
+
+	/* Register for the SDVO device: SDVOB or SDVOC */
+	int sdvo_reg;
+
+	/* Active outputs controlled by this SDVO output */
+	uint16_t controlled_output;
+
+	/*
+	 * Capabilities of the SDVO device returned by
+	 * i830_sdvo_get_capabilities()
+	 */
+	struct intel_sdvo_caps caps;
+
+	/* Pixel clock limitations reported by the SDVO device, in kHz */
+	int pixel_clock_min, pixel_clock_max;
+
+	/*
+	* For multiple function SDVO device,
+	* this is for current attached outputs.
+	*/
+	uint16_t attached_output;
+
+	/*
+	 * Hotplug activation bits for this device
+	 */
+	uint8_t hotplug_active[2];
+
+	/**
+	 * This is used to select the color range of RBG outputs in HDMI mode.
+	 * It is only valid when using TMDS encoding and 8 bit per color mode.
+	 */
+	uint32_t color_range;
+
+	/**
+	 * This is set if we're going to treat the device as TV-out.
+	 *
+	 * While we have these nice friendly flags for output types that ought
+	 * to decide this for us, the S-Video output on our HDMI+S-Video card
+	 * shows up as RGB1 (VGA).
+	 */
+	bool is_tv;
+
+	/* This is for current tv format name */
+	int tv_format_index;
+
+	/**
+	 * This is set if we treat the device as HDMI, instead of DVI.
+	 */
+	bool is_hdmi;
+	bool has_hdmi_monitor;
+	bool has_hdmi_audio;
+
+	/**
+	 * This is set if we detect output of sdvo device as LVDS and
+	 * have a valid fixed mode to use with the panel.
+	 */
+	bool is_lvds;
+
+	/**
+	 * This is sdvo fixed pannel mode pointer
+	 */
+	struct drm_display_mode *sdvo_lvds_fixed_mode;
+
+	/* DDC bus used by this SDVO encoder */
+	uint8_t ddc_bus;
+
+	/* Input timings for adjusted_mode */
+	struct intel_sdvo_dtd input_dtd;
+};
+
+struct intel_sdvo_connector {
+	struct intel_connector base;
+
+	/* Mark the type of connector */
+	uint16_t output_flag;
+
+	enum hdmi_force_audio force_audio;
+
+	/* This contains all current supported TV format */
+	u8 tv_format_supported[TV_FORMAT_NUM];
+	int   format_supported_num;
+	struct drm_property *tv_format;
+
+	/* add the property for the SDVO-TV */
+	struct drm_property *left;
+	struct drm_property *right;
+	struct drm_property *top;
+	struct drm_property *bottom;
+	struct drm_property *hpos;
+	struct drm_property *vpos;
+	struct drm_property *contrast;
+	struct drm_property *saturation;
+	struct drm_property *hue;
+	struct drm_property *sharpness;
+	struct drm_property *flicker_filter;
+	struct drm_property *flicker_filter_adaptive;
+	struct drm_property *flicker_filter_2d;
+	struct drm_property *tv_chroma_filter;
+	struct drm_property *tv_luma_filter;
+	struct drm_property *dot_crawl;
+
+	/* add the property for the SDVO-TV/LVDS */
+	struct drm_property *brightness;
+
+	/* Add variable to record current setting for the above property */
+	u32	left_margin, right_margin, top_margin, bottom_margin;
+
+	/* this is to get the range of margin.*/
+	u32	max_hscan,  max_vscan;
+	u32	max_hpos, cur_hpos;
+	u32	max_vpos, cur_vpos;
+	u32	cur_brightness, max_brightness;
+	u32	cur_contrast,	max_contrast;
+	u32	cur_saturation, max_saturation;
+	u32	cur_hue,	max_hue;
+	u32	cur_sharpness,	max_sharpness;
+	u32	cur_flicker_filter,		max_flicker_filter;
+	u32	cur_flicker_filter_adaptive,	max_flicker_filter_adaptive;
+	u32	cur_flicker_filter_2d,		max_flicker_filter_2d;
+	u32	cur_tv_chroma_filter,	max_tv_chroma_filter;
+	u32	cur_tv_luma_filter,	max_tv_luma_filter;
+	u32	cur_dot_crawl,	max_dot_crawl;
+};
+
+static struct intel_sdvo *to_intel_sdvo(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct intel_sdvo, base.base);
+}
+
+static struct intel_sdvo *intel_attached_sdvo(struct drm_connector *connector)
+{
+	return container_of(intel_attached_encoder(connector),
+			    struct intel_sdvo, base);
+}
+
+static struct intel_sdvo_connector *to_intel_sdvo_connector(struct drm_connector *connector)
+{
+	return container_of(to_intel_connector(connector), struct intel_sdvo_connector, base);
+}
+
+static bool
+intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags);
+static bool
+intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
+			      struct intel_sdvo_connector *intel_sdvo_connector,
+			      int type);
+static bool
+intel_sdvo_create_enhance_property(struct intel_sdvo *intel_sdvo,
+				   struct intel_sdvo_connector *intel_sdvo_connector);
+
+/**
+ * Writes the SDVOB or SDVOC with the given value, but always writes both
+ * SDVOB and SDVOC to work around apparent hardware issues (according to
+ * comments in the BIOS).
+ */
+static void intel_sdvo_write_sdvox(struct intel_sdvo *intel_sdvo, u32 val)
+{
+	struct drm_device *dev = intel_sdvo->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 bval = val, cval = val;
+	int i;
+
+	if (intel_sdvo->sdvo_reg == PCH_SDVOB) {
+		I915_WRITE(intel_sdvo->sdvo_reg, val);
+		I915_READ(intel_sdvo->sdvo_reg);
+		return;
+	}
+
+	if (intel_sdvo->sdvo_reg == SDVOB) {
+		cval = I915_READ(SDVOC);
+	} else {
+		bval = I915_READ(SDVOB);
+	}
+	/*
+	 * Write the registers twice for luck. Sometimes,
+	 * writing them only once doesn't appear to 'stick'.
+	 * The BIOS does this too. Yay, magic
+	 */
+	for (i = 0; i < 2; i++)
+	{
+		I915_WRITE(SDVOB, bval);
+		I915_READ(SDVOB);
+		I915_WRITE(SDVOC, cval);
+		I915_READ(SDVOC);
+	}
+}
+
+static bool intel_sdvo_read_byte(struct intel_sdvo *intel_sdvo, u8 addr, u8 *ch)
+{
+	struct i2c_msg msgs[] = {
+		{
+			.addr = intel_sdvo->slave_addr,
+			.flags = 0,
+			.len = 1,
+			.buf = &addr,
+		},
+		{
+			.addr = intel_sdvo->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = ch,
+		}
+	};
+	int ret;
+
+	if ((ret = i2c_transfer(intel_sdvo->i2c, msgs, 2)) == 2)
+		return true;
+
+	DRM_DEBUG_KMS("i2c transfer returned %d\n", ret);
+	return false;
+}
+
+#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}
+/** Mapping of command numbers to names, for debug output */
+static const struct _sdvo_cmd_name {
+	u8 cmd;
+	const char *name;
+} sdvo_cmd_names[] = {
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_POWER_STATES),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POWER_STATE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODER_POWER_STATE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DISPLAY_POWER_STATE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS),
+
+	/* Add the op code for SDVO enhancements */
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HPOS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HPOS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HPOS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_VPOS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_VPOS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_VPOS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SATURATION),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SATURATION),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SATURATION),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HUE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HUE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HUE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_CONTRAST),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CONTRAST),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTRAST),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_BRIGHTNESS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_BRIGHTNESS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_BRIGHTNESS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_H),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_H),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_H),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_V),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_V),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_V),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_ADAPTIVE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_2D),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_2D),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_2D),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SHARPNESS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SHARPNESS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SHARPNESS),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DOT_CRAWL),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DOT_CRAWL),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_CHROMA_FILTER),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_CHROMA_FILTER),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_CHROMA_FILTER),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_LUMA_FILTER),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_LUMA_FILTER),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_LUMA_FILTER),
+
+	/* HDMI op code */
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPP_ENCODE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ENCODE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_PIXEL_REPLI),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PIXEL_REPLI),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY_CAP),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_COLORIMETRY),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_AUDIO_STAT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_STAT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INDEX),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_INDEX),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INFO),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_AV_SPLIT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_AV_SPLIT),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_TXRATE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_TXRATE),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_DATA),
+	SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA),
+};
+
+#define IS_SDVOB(reg)	(reg == SDVOB || reg == PCH_SDVOB)
+#define SDVO_NAME(svdo) (IS_SDVOB((svdo)->sdvo_reg) ? "SDVOB" : "SDVOC")
+
+static void intel_sdvo_debug_write(struct intel_sdvo *intel_sdvo, u8 cmd,
+				   const void *args, int args_len)
+{
+	int i;
+
+	DRM_DEBUG_KMS("%s: W: %02X ",
+				SDVO_NAME(intel_sdvo), cmd);
+	for (i = 0; i < args_len; i++)
+		DRM_LOG_KMS("%02X ", ((u8 *)args)[i]);
+	for (; i < 8; i++)
+		DRM_LOG_KMS("   ");
+	for (i = 0; i < ARRAY_SIZE(sdvo_cmd_names); i++) {
+		if (cmd == sdvo_cmd_names[i].cmd) {
+			DRM_LOG_KMS("(%s)", sdvo_cmd_names[i].name);
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(sdvo_cmd_names))
+		DRM_LOG_KMS("(%02X)", cmd);
+	DRM_LOG_KMS("\n");
+}
+
+static const char *cmd_status_names[] = {
+	"Power on",
+	"Success",
+	"Not supported",
+	"Invalid arg",
+	"Pending",
+	"Target not specified",
+	"Scaling not supported"
+};
+
+static bool intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd,
+				 const void *args, int args_len)
+{
+	u8 buf[args_len*2 + 2], status;
+	struct i2c_msg msgs[args_len + 3];
+	int i, ret;
+
+	intel_sdvo_debug_write(intel_sdvo, cmd, args, args_len);
+
+	for (i = 0; i < args_len; i++) {
+		msgs[i].addr = intel_sdvo->slave_addr;
+		msgs[i].flags = 0;
+		msgs[i].len = 2;
+		msgs[i].buf = buf + 2 *i;
+		buf[2*i + 0] = SDVO_I2C_ARG_0 - i;
+		buf[2*i + 1] = ((u8*)args)[i];
+	}
+	msgs[i].addr = intel_sdvo->slave_addr;
+	msgs[i].flags = 0;
+	msgs[i].len = 2;
+	msgs[i].buf = buf + 2*i;
+	buf[2*i + 0] = SDVO_I2C_OPCODE;
+	buf[2*i + 1] = cmd;
+
+	/* the following two are to read the response */
+	status = SDVO_I2C_CMD_STATUS;
+	msgs[i+1].addr = intel_sdvo->slave_addr;
+	msgs[i+1].flags = 0;
+	msgs[i+1].len = 1;
+	msgs[i+1].buf = &status;
+
+	msgs[i+2].addr = intel_sdvo->slave_addr;
+	msgs[i+2].flags = I2C_M_RD;
+	msgs[i+2].len = 1;
+	msgs[i+2].buf = &status;
+
+	ret = i2c_transfer(intel_sdvo->i2c, msgs, i+3);
+	if (ret < 0) {
+		DRM_DEBUG_KMS("I2c transfer returned %d\n", ret);
+		return false;
+	}
+	if (ret != i+3) {
+		/* failure in I2C transfer */
+		DRM_DEBUG_KMS("I2c transfer returned %d/%d\n", ret, i+3);
+		return false;
+	}
+
+	return true;
+}
+
+static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo,
+				     void *response, int response_len)
+{
+	u8 retry = 5;
+	u8 status;
+	int i;
+
+	DRM_DEBUG_KMS("%s: R: ", SDVO_NAME(intel_sdvo));
+
+	/*
+	 * The documentation states that all commands will be
+	 * processed within 15µs, and that we need only poll
+	 * the status byte a maximum of 3 times in order for the
+	 * command to be complete.
+	 *
+	 * Check 5 times in case the hardware failed to read the docs.
+	 */
+	if (!intel_sdvo_read_byte(intel_sdvo,
+				  SDVO_I2C_CMD_STATUS,
+				  &status))
+		goto log_fail;
+
+	while (status == SDVO_CMD_STATUS_PENDING && retry--) {
+		udelay(15);
+		if (!intel_sdvo_read_byte(intel_sdvo,
+					  SDVO_I2C_CMD_STATUS,
+					  &status))
+			goto log_fail;
+	}
+
+	if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP)
+		DRM_LOG_KMS("(%s)", cmd_status_names[status]);
+	else
+		DRM_LOG_KMS("(??? %d)", status);
+
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		goto log_fail;
+
+	/* Read the command response */
+	for (i = 0; i < response_len; i++) {
+		if (!intel_sdvo_read_byte(intel_sdvo,
+					  SDVO_I2C_RETURN_0 + i,
+					  &((u8 *)response)[i]))
+			goto log_fail;
+		DRM_LOG_KMS(" %02X", ((u8 *)response)[i]);
+	}
+	DRM_LOG_KMS("\n");
+	return true;
+
+log_fail:
+	DRM_LOG_KMS("... failed\n");
+	return false;
+}
+
+static int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode)
+{
+	if (mode->clock >= 100000)
+		return 1;
+	else if (mode->clock >= 50000)
+		return 2;
+	else
+		return 4;
+}
+
+static bool intel_sdvo_set_control_bus_switch(struct intel_sdvo *intel_sdvo,
+					      u8 ddc_bus)
+{
+	/* This must be the immediately preceding write before the i2c xfer */
+	return intel_sdvo_write_cmd(intel_sdvo,
+				    SDVO_CMD_SET_CONTROL_BUS_SWITCH,
+				    &ddc_bus, 1);
+}
+
+static bool intel_sdvo_set_value(struct intel_sdvo *intel_sdvo, u8 cmd, const void *data, int len)
+{
+	if (!intel_sdvo_write_cmd(intel_sdvo, cmd, data, len))
+		return false;
+
+	return intel_sdvo_read_response(intel_sdvo, NULL, 0);
+}
+
+static bool
+intel_sdvo_get_value(struct intel_sdvo *intel_sdvo, u8 cmd, void *value, int len)
+{
+	if (!intel_sdvo_write_cmd(intel_sdvo, cmd, NULL, 0))
+		return false;
+
+	return intel_sdvo_read_response(intel_sdvo, value, len);
+}
+
+static bool intel_sdvo_set_target_input(struct intel_sdvo *intel_sdvo)
+{
+	struct intel_sdvo_set_target_input_args targets = {0};
+	return intel_sdvo_set_value(intel_sdvo,
+				    SDVO_CMD_SET_TARGET_INPUT,
+				    &targets, sizeof(targets));
+}
+
+/**
+ * Return whether each input is trained.
+ *
+ * This function is making an assumption about the layout of the response,
+ * which should be checked against the docs.
+ */
+static bool intel_sdvo_get_trained_inputs(struct intel_sdvo *intel_sdvo, bool *input_1, bool *input_2)
+{
+	struct intel_sdvo_get_trained_inputs_response response;
+
+	BUILD_BUG_ON(sizeof(response) != 1);
+	if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_TRAINED_INPUTS,
+				  &response, sizeof(response)))
+		return false;
+
+	*input_1 = response.input0_trained;
+	*input_2 = response.input1_trained;
+	return true;
+}
+
+static bool intel_sdvo_set_active_outputs(struct intel_sdvo *intel_sdvo,
+					  u16 outputs)
+{
+	return intel_sdvo_set_value(intel_sdvo,
+				    SDVO_CMD_SET_ACTIVE_OUTPUTS,
+				    &outputs, sizeof(outputs));
+}
+
+static bool intel_sdvo_set_encoder_power_state(struct intel_sdvo *intel_sdvo,
+					       int mode)
+{
+	u8 state = SDVO_ENCODER_STATE_ON;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		state = SDVO_ENCODER_STATE_ON;
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+		state = SDVO_ENCODER_STATE_STANDBY;
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		state = SDVO_ENCODER_STATE_SUSPEND;
+		break;
+	case DRM_MODE_DPMS_OFF:
+		state = SDVO_ENCODER_STATE_OFF;
+		break;
+	}
+
+	return intel_sdvo_set_value(intel_sdvo,
+				    SDVO_CMD_SET_ENCODER_POWER_STATE, &state, sizeof(state));
+}
+
+static bool intel_sdvo_get_input_pixel_clock_range(struct intel_sdvo *intel_sdvo,
+						   int *clock_min,
+						   int *clock_max)
+{
+	struct intel_sdvo_pixel_clock_range clocks;
+
+	BUILD_BUG_ON(sizeof(clocks) != 4);
+	if (!intel_sdvo_get_value(intel_sdvo,
+				  SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE,
+				  &clocks, sizeof(clocks)))
+		return false;
+
+	/* Convert the values from units of 10 kHz to kHz. */
+	*clock_min = clocks.min * 10;
+	*clock_max = clocks.max * 10;
+	return true;
+}
+
+static bool intel_sdvo_set_target_output(struct intel_sdvo *intel_sdvo,
+					 u16 outputs)
+{
+	return intel_sdvo_set_value(intel_sdvo,
+				    SDVO_CMD_SET_TARGET_OUTPUT,
+				    &outputs, sizeof(outputs));
+}
+
+static bool intel_sdvo_set_timing(struct intel_sdvo *intel_sdvo, u8 cmd,
+				  struct intel_sdvo_dtd *dtd)
+{
+	return intel_sdvo_set_value(intel_sdvo, cmd, &dtd->part1, sizeof(dtd->part1)) &&
+		intel_sdvo_set_value(intel_sdvo, cmd + 1, &dtd->part2, sizeof(dtd->part2));
+}
+
+static bool intel_sdvo_set_input_timing(struct intel_sdvo *intel_sdvo,
+					 struct intel_sdvo_dtd *dtd)
+{
+	return intel_sdvo_set_timing(intel_sdvo,
+				     SDVO_CMD_SET_INPUT_TIMINGS_PART1, dtd);
+}
+
+static bool intel_sdvo_set_output_timing(struct intel_sdvo *intel_sdvo,
+					 struct intel_sdvo_dtd *dtd)
+{
+	return intel_sdvo_set_timing(intel_sdvo,
+				     SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd);
+}
+
+static bool
+intel_sdvo_create_preferred_input_timing(struct intel_sdvo *intel_sdvo,
+					 uint16_t clock,
+					 uint16_t width,
+					 uint16_t height)
+{
+	struct intel_sdvo_preferred_input_timing_args args;
+
+	memset(&args, 0, sizeof(args));
+	args.clock = clock;
+	args.width = width;
+	args.height = height;
+	args.interlace = 0;
+
+	if (intel_sdvo->is_lvds &&
+	   (intel_sdvo->sdvo_lvds_fixed_mode->hdisplay != width ||
+	    intel_sdvo->sdvo_lvds_fixed_mode->vdisplay != height))
+		args.scaled = 1;
+
+	return intel_sdvo_set_value(intel_sdvo,
+				    SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING,
+				    &args, sizeof(args));
+}
+
+static bool intel_sdvo_get_preferred_input_timing(struct intel_sdvo *intel_sdvo,
+						  struct intel_sdvo_dtd *dtd)
+{
+	BUILD_BUG_ON(sizeof(dtd->part1) != 8);
+	BUILD_BUG_ON(sizeof(dtd->part2) != 8);
+	return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1,
+				    &dtd->part1, sizeof(dtd->part1)) &&
+		intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2,
+				     &dtd->part2, sizeof(dtd->part2));
+}
+
+static bool intel_sdvo_set_clock_rate_mult(struct intel_sdvo *intel_sdvo, u8 val)
+{
+	return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_CLOCK_RATE_MULT, &val, 1);
+}
+
+static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd,
+					 const struct drm_display_mode *mode)
+{
+	uint16_t width, height;
+	uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len;
+	uint16_t h_sync_offset, v_sync_offset;
+	int mode_clock;
+
+	width = mode->crtc_hdisplay;
+	height = mode->crtc_vdisplay;
+
+	/* do some mode translations */
+	h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start;
+	h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
+
+	v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start;
+	v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
+
+	h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start;
+	v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start;
+
+	mode_clock = mode->clock;
+	mode_clock /= intel_mode_get_pixel_multiplier(mode) ?: 1;
+	mode_clock /= 10;
+	dtd->part1.clock = mode_clock;
+
+	dtd->part1.h_active = width & 0xff;
+	dtd->part1.h_blank = h_blank_len & 0xff;
+	dtd->part1.h_high = (((width >> 8) & 0xf) << 4) |
+		((h_blank_len >> 8) & 0xf);
+	dtd->part1.v_active = height & 0xff;
+	dtd->part1.v_blank = v_blank_len & 0xff;
+	dtd->part1.v_high = (((height >> 8) & 0xf) << 4) |
+		((v_blank_len >> 8) & 0xf);
+
+	dtd->part2.h_sync_off = h_sync_offset & 0xff;
+	dtd->part2.h_sync_width = h_sync_len & 0xff;
+	dtd->part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 |
+		(v_sync_len & 0xf);
+	dtd->part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) |
+		((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) |
+		((v_sync_len & 0x30) >> 4);
+
+	dtd->part2.dtd_flags = 0x18;
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		dtd->part2.dtd_flags |= DTD_FLAG_INTERLACE;
+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+		dtd->part2.dtd_flags |= DTD_FLAG_HSYNC_POSITIVE;
+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+		dtd->part2.dtd_flags |= DTD_FLAG_VSYNC_POSITIVE;
+
+	dtd->part2.sdvo_flags = 0;
+	dtd->part2.v_sync_off_high = v_sync_offset & 0xc0;
+	dtd->part2.reserved = 0;
+}
+
+static void intel_sdvo_get_mode_from_dtd(struct drm_display_mode * mode,
+					 const struct intel_sdvo_dtd *dtd)
+{
+	mode->hdisplay = dtd->part1.h_active;
+	mode->hdisplay += ((dtd->part1.h_high >> 4) & 0x0f) << 8;
+	mode->hsync_start = mode->hdisplay + dtd->part2.h_sync_off;
+	mode->hsync_start += (dtd->part2.sync_off_width_high & 0xc0) << 2;
+	mode->hsync_end = mode->hsync_start + dtd->part2.h_sync_width;
+	mode->hsync_end += (dtd->part2.sync_off_width_high & 0x30) << 4;
+	mode->htotal = mode->hdisplay + dtd->part1.h_blank;
+	mode->htotal += (dtd->part1.h_high & 0xf) << 8;
+
+	mode->vdisplay = dtd->part1.v_active;
+	mode->vdisplay += ((dtd->part1.v_high >> 4) & 0x0f) << 8;
+	mode->vsync_start = mode->vdisplay;
+	mode->vsync_start += (dtd->part2.v_sync_off_width >> 4) & 0xf;
+	mode->vsync_start += (dtd->part2.sync_off_width_high & 0x0c) << 2;
+	mode->vsync_start += dtd->part2.v_sync_off_high & 0xc0;
+	mode->vsync_end = mode->vsync_start +
+		(dtd->part2.v_sync_off_width & 0xf);
+	mode->vsync_end += (dtd->part2.sync_off_width_high & 0x3) << 4;
+	mode->vtotal = mode->vdisplay + dtd->part1.v_blank;
+	mode->vtotal += (dtd->part1.v_high & 0xf) << 8;
+
+	mode->clock = dtd->part1.clock * 10;
+
+	mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+	if (dtd->part2.dtd_flags & DTD_FLAG_INTERLACE)
+		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+	if (dtd->part2.dtd_flags & DTD_FLAG_HSYNC_POSITIVE)
+		mode->flags |= DRM_MODE_FLAG_PHSYNC;
+	if (dtd->part2.dtd_flags & DTD_FLAG_VSYNC_POSITIVE)
+		mode->flags |= DRM_MODE_FLAG_PVSYNC;
+}
+
+static bool intel_sdvo_check_supp_encode(struct intel_sdvo *intel_sdvo)
+{
+	struct intel_sdvo_encode encode;
+
+	BUILD_BUG_ON(sizeof(encode) != 2);
+	return intel_sdvo_get_value(intel_sdvo,
+				  SDVO_CMD_GET_SUPP_ENCODE,
+				  &encode, sizeof(encode));
+}
+
+static bool intel_sdvo_set_encode(struct intel_sdvo *intel_sdvo,
+				  uint8_t mode)
+{
+	return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_ENCODE, &mode, 1);
+}
+
+static bool intel_sdvo_set_colorimetry(struct intel_sdvo *intel_sdvo,
+				       uint8_t mode)
+{
+	return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_COLORIMETRY, &mode, 1);
+}
+
+#if 0
+static void intel_sdvo_dump_hdmi_buf(struct intel_sdvo *intel_sdvo)
+{
+	int i, j;
+	uint8_t set_buf_index[2];
+	uint8_t av_split;
+	uint8_t buf_size;
+	uint8_t buf[48];
+	uint8_t *pos;
+
+	intel_sdvo_get_value(encoder, SDVO_CMD_GET_HBUF_AV_SPLIT, &av_split, 1);
+
+	for (i = 0; i <= av_split; i++) {
+		set_buf_index[0] = i; set_buf_index[1] = 0;
+		intel_sdvo_write_cmd(encoder, SDVO_CMD_SET_HBUF_INDEX,
+				     set_buf_index, 2);
+		intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_INFO, NULL, 0);
+		intel_sdvo_read_response(encoder, &buf_size, 1);
+
+		pos = buf;
+		for (j = 0; j <= buf_size; j += 8) {
+			intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_DATA,
+					     NULL, 0);
+			intel_sdvo_read_response(encoder, pos, 8);
+			pos += 8;
+		}
+	}
+}
+#endif
+
+static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo)
+{
+	struct dip_infoframe avi_if = {
+		.type = DIP_TYPE_AVI,
+		.ver = DIP_VERSION_AVI,
+		.len = DIP_LEN_AVI,
+	};
+	uint8_t tx_rate = SDVO_HBUF_TX_VSYNC;
+	uint8_t set_buf_index[2] = { 1, 0 };
+	uint64_t *data = (uint64_t *)&avi_if;
+	unsigned i;
+
+	intel_dip_infoframe_csum(&avi_if);
+
+	if (!intel_sdvo_set_value(intel_sdvo,
+				  SDVO_CMD_SET_HBUF_INDEX,
+				  set_buf_index, 2))
+		return false;
+
+	for (i = 0; i < sizeof(avi_if); i += 8) {
+		if (!intel_sdvo_set_value(intel_sdvo,
+					  SDVO_CMD_SET_HBUF_DATA,
+					  data, 8))
+			return false;
+		data++;
+	}
+
+	return intel_sdvo_set_value(intel_sdvo,
+				    SDVO_CMD_SET_HBUF_TXRATE,
+				    &tx_rate, 1);
+}
+
+static bool intel_sdvo_set_tv_format(struct intel_sdvo *intel_sdvo)
+{
+	struct intel_sdvo_tv_format format;
+	uint32_t format_map;
+
+	format_map = 1 << intel_sdvo->tv_format_index;
+	memset(&format, 0, sizeof(format));
+	memcpy(&format, &format_map, min(sizeof(format), sizeof(format_map)));
+
+	BUILD_BUG_ON(sizeof(format) != 6);
+	return intel_sdvo_set_value(intel_sdvo,
+				    SDVO_CMD_SET_TV_FORMAT,
+				    &format, sizeof(format));
+}
+
+static bool
+intel_sdvo_set_output_timings_from_mode(struct intel_sdvo *intel_sdvo,
+					struct drm_display_mode *mode)
+{
+	struct intel_sdvo_dtd output_dtd;
+
+	if (!intel_sdvo_set_target_output(intel_sdvo,
+					  intel_sdvo->attached_output))
+		return false;
+
+	intel_sdvo_get_dtd_from_mode(&output_dtd, mode);
+	if (!intel_sdvo_set_output_timing(intel_sdvo, &output_dtd))
+		return false;
+
+	return true;
+}
+
+static bool
+intel_sdvo_set_input_timings_for_mode(struct intel_sdvo *intel_sdvo,
+					struct drm_display_mode *mode,
+					struct drm_display_mode *adjusted_mode)
+{
+	/* Reset the input timing to the screen. Assume always input 0. */
+	if (!intel_sdvo_set_target_input(intel_sdvo))
+		return false;
+
+	if (!intel_sdvo_create_preferred_input_timing(intel_sdvo,
+						      mode->clock / 10,
+						      mode->hdisplay,
+						      mode->vdisplay))
+		return false;
+
+	if (!intel_sdvo_get_preferred_input_timing(intel_sdvo,
+						   &intel_sdvo->input_dtd))
+		return false;
+
+	intel_sdvo_get_mode_from_dtd(adjusted_mode, &intel_sdvo->input_dtd);
+
+	return true;
+}
+
+static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
+	int multiplier;
+
+	/* We need to construct preferred input timings based on our
+	 * output timings.  To do that, we have to set the output
+	 * timings, even though this isn't really the right place in
+	 * the sequence to do it. Oh well.
+	 */
+	if (intel_sdvo->is_tv) {
+		if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo, mode))
+			return false;
+
+		(void) intel_sdvo_set_input_timings_for_mode(intel_sdvo,
+							     mode,
+							     adjusted_mode);
+	} else if (intel_sdvo->is_lvds) {
+		if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo,
+							     intel_sdvo->sdvo_lvds_fixed_mode))
+			return false;
+
+		(void) intel_sdvo_set_input_timings_for_mode(intel_sdvo,
+							     mode,
+							     adjusted_mode);
+	}
+
+	/* Make the CRTC code factor in the SDVO pixel multiplier.  The
+	 * SDVO device will factor out the multiplier during mode_set.
+	 */
+	multiplier = intel_sdvo_get_pixel_multiplier(adjusted_mode);
+	intel_mode_set_pixel_multiplier(adjusted_mode, multiplier);
+
+	return true;
+}
+
+static void intel_sdvo_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
+	u32 sdvox;
+	struct intel_sdvo_in_out_map in_out;
+	struct intel_sdvo_dtd input_dtd, output_dtd;
+	int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+	int rate;
+
+	if (!mode)
+		return;
+
+	/* First, set the input mapping for the first input to our controlled
+	 * output. This is only correct if we're a single-input device, in
+	 * which case the first input is the output from the appropriate SDVO
+	 * channel on the motherboard.  In a two-input device, the first input
+	 * will be SDVOB and the second SDVOC.
+	 */
+	in_out.in0 = intel_sdvo->attached_output;
+	in_out.in1 = 0;
+
+	intel_sdvo_set_value(intel_sdvo,
+			     SDVO_CMD_SET_IN_OUT_MAP,
+			     &in_out, sizeof(in_out));
+
+	/* Set the output timings to the screen */
+	if (!intel_sdvo_set_target_output(intel_sdvo,
+					  intel_sdvo->attached_output))
+		return;
+
+	/* lvds has a special fixed output timing. */
+	if (intel_sdvo->is_lvds)
+		intel_sdvo_get_dtd_from_mode(&output_dtd,
+					     intel_sdvo->sdvo_lvds_fixed_mode);
+	else
+		intel_sdvo_get_dtd_from_mode(&output_dtd, mode);
+	(void) intel_sdvo_set_output_timing(intel_sdvo, &output_dtd);
+
+	/* Set the input timing to the screen. Assume always input 0. */
+	if (!intel_sdvo_set_target_input(intel_sdvo))
+		return;
+
+	if (intel_sdvo->has_hdmi_monitor) {
+		intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_HDMI);
+		intel_sdvo_set_colorimetry(intel_sdvo,
+					   SDVO_COLORIMETRY_RGB256);
+		intel_sdvo_set_avi_infoframe(intel_sdvo);
+	} else
+		intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_DVI);
+
+	if (intel_sdvo->is_tv &&
+	    !intel_sdvo_set_tv_format(intel_sdvo))
+		return;
+
+	/* We have tried to get input timing in mode_fixup, and filled into
+	 * adjusted_mode.
+	 */
+	intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
+	(void) intel_sdvo_set_input_timing(intel_sdvo, &input_dtd);
+
+	switch (pixel_multiplier) {
+	default:
+	case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
+	case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
+	case 4: rate = SDVO_CLOCK_RATE_MULT_4X; break;
+	}
+	if (!intel_sdvo_set_clock_rate_mult(intel_sdvo, rate))
+		return;
+
+	/* Set the SDVO control regs. */
+	if (INTEL_INFO(dev)->gen >= 4) {
+		/* The real mode polarity is set by the SDVO commands, using
+		 * struct intel_sdvo_dtd. */
+		sdvox = SDVO_VSYNC_ACTIVE_HIGH | SDVO_HSYNC_ACTIVE_HIGH;
+		if (intel_sdvo->is_hdmi)
+			sdvox |= intel_sdvo->color_range;
+		if (INTEL_INFO(dev)->gen < 5)
+			sdvox |= SDVO_BORDER_ENABLE;
+	} else {
+		sdvox = I915_READ(intel_sdvo->sdvo_reg);
+		switch (intel_sdvo->sdvo_reg) {
+		case SDVOB:
+			sdvox &= SDVOB_PRESERVE_MASK;
+			break;
+		case SDVOC:
+			sdvox &= SDVOC_PRESERVE_MASK;
+			break;
+		}
+		sdvox |= (9 << 19) | SDVO_BORDER_ENABLE;
+	}
+
+	if (INTEL_PCH_TYPE(dev) >= PCH_CPT)
+		sdvox |= TRANSCODER_CPT(intel_crtc->pipe);
+	else
+		sdvox |= TRANSCODER(intel_crtc->pipe);
+
+	if (intel_sdvo->has_hdmi_audio)
+		sdvox |= SDVO_AUDIO_ENABLE;
+
+	if (INTEL_INFO(dev)->gen >= 4) {
+		/* done in crtc_mode_set as the dpll_md reg must be written early */
+	} else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
+		/* done in crtc_mode_set as it lives inside the dpll register */
+	} else {
+		sdvox |= (pixel_multiplier - 1) << SDVO_PORT_MULTIPLY_SHIFT;
+	}
+
+	if (input_dtd.part2.sdvo_flags & SDVO_NEED_TO_STALL &&
+	    INTEL_INFO(dev)->gen < 5)
+		sdvox |= SDVO_STALL_SELECT;
+	intel_sdvo_write_sdvox(intel_sdvo, sdvox);
+}
+
+static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+	u32 temp;
+
+	if (mode != DRM_MODE_DPMS_ON) {
+		intel_sdvo_set_active_outputs(intel_sdvo, 0);
+		if (0)
+			intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
+
+		if (mode == DRM_MODE_DPMS_OFF) {
+			temp = I915_READ(intel_sdvo->sdvo_reg);
+			if ((temp & SDVO_ENABLE) != 0) {
+				intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE);
+			}
+		}
+	} else {
+		bool input1, input2;
+		int i;
+		u8 status;
+
+		temp = I915_READ(intel_sdvo->sdvo_reg);
+		if ((temp & SDVO_ENABLE) == 0)
+			intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE);
+		for (i = 0; i < 2; i++)
+			intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+		status = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2);
+		/* Warn if the device reported failure to sync.
+		 * A lot of SDVO devices fail to notify of sync, but it's
+		 * a given it the status is a success, we succeeded.
+		 */
+		if (status == SDVO_CMD_STATUS_SUCCESS && !input1) {
+			DRM_DEBUG_KMS("First %s output reported failure to "
+					"sync\n", SDVO_NAME(intel_sdvo));
+		}
+
+		if (0)
+			intel_sdvo_set_encoder_power_state(intel_sdvo, mode);
+		intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
+	}
+	return;
+}
+
+static int intel_sdvo_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
+
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	if (intel_sdvo->pixel_clock_min > mode->clock)
+		return MODE_CLOCK_LOW;
+
+	if (intel_sdvo->pixel_clock_max < mode->clock)
+		return MODE_CLOCK_HIGH;
+
+	if (intel_sdvo->is_lvds) {
+		if (mode->hdisplay > intel_sdvo->sdvo_lvds_fixed_mode->hdisplay)
+			return MODE_PANEL;
+
+		if (mode->vdisplay > intel_sdvo->sdvo_lvds_fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
+	return MODE_OK;
+}
+
+static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct intel_sdvo_caps *caps)
+{
+	BUILD_BUG_ON(sizeof(*caps) != 8);
+	if (!intel_sdvo_get_value(intel_sdvo,
+				  SDVO_CMD_GET_DEVICE_CAPS,
+				  caps, sizeof(*caps)))
+		return false;
+
+	DRM_DEBUG_KMS("SDVO capabilities:\n"
+		      "  vendor_id: %d\n"
+		      "  device_id: %d\n"
+		      "  device_rev_id: %d\n"
+		      "  sdvo_version_major: %d\n"
+		      "  sdvo_version_minor: %d\n"
+		      "  sdvo_inputs_mask: %d\n"
+		      "  smooth_scaling: %d\n"
+		      "  sharp_scaling: %d\n"
+		      "  up_scaling: %d\n"
+		      "  down_scaling: %d\n"
+		      "  stall_support: %d\n"
+		      "  output_flags: %d\n",
+		      caps->vendor_id,
+		      caps->device_id,
+		      caps->device_rev_id,
+		      caps->sdvo_version_major,
+		      caps->sdvo_version_minor,
+		      caps->sdvo_inputs_mask,
+		      caps->smooth_scaling,
+		      caps->sharp_scaling,
+		      caps->up_scaling,
+		      caps->down_scaling,
+		      caps->stall_support,
+		      caps->output_flags);
+
+	return true;
+}
+
+static int intel_sdvo_supports_hotplug(struct intel_sdvo *intel_sdvo)
+{
+	struct drm_device *dev = intel_sdvo->base.base.dev;
+	u8 response[2];
+
+	/* HW Erratum: SDVO Hotplug is broken on all i945G chips, there's noise
+	 * on the line. */
+	if (IS_I945G(dev) || IS_I945GM(dev))
+		return false;
+
+	return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
+				    &response, 2) && response[0];
+}
+
+static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder)
+{
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
+
+	intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &intel_sdvo->hotplug_active, 2);
+}
+
+static bool
+intel_sdvo_multifunc_encoder(struct intel_sdvo *intel_sdvo)
+{
+	/* Is there more than one type of output? */
+	return hweight16(intel_sdvo->caps.output_flags) > 1;
+}
+
+static struct edid *
+intel_sdvo_get_edid(struct drm_connector *connector)
+{
+	struct intel_sdvo *sdvo = intel_attached_sdvo(connector);
+	return drm_get_edid(connector, &sdvo->ddc);
+}
+
+/* Mac mini hack -- use the same DDC as the analog connector */
+static struct edid *
+intel_sdvo_get_analog_edid(struct drm_connector *connector)
+{
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+
+	return drm_get_edid(connector,
+			    &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+}
+
+enum drm_connector_status
+intel_sdvo_tmds_sink_detect(struct drm_connector *connector)
+{
+	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
+	enum drm_connector_status status;
+	struct edid *edid;
+
+	edid = intel_sdvo_get_edid(connector);
+
+	if (edid == NULL && intel_sdvo_multifunc_encoder(intel_sdvo)) {
+		u8 ddc, saved_ddc = intel_sdvo->ddc_bus;
+
+		/*
+		 * Don't use the 1 as the argument of DDC bus switch to get
+		 * the EDID. It is used for SDVO SPD ROM.
+		 */
+		for (ddc = intel_sdvo->ddc_bus >> 1; ddc > 1; ddc >>= 1) {
+			intel_sdvo->ddc_bus = ddc;
+			edid = intel_sdvo_get_edid(connector);
+			if (edid)
+				break;
+		}
+		/*
+		 * If we found the EDID on the other bus,
+		 * assume that is the correct DDC bus.
+		 */
+		if (edid == NULL)
+			intel_sdvo->ddc_bus = saved_ddc;
+	}
+
+	/*
+	 * When there is no edid and no monitor is connected with VGA
+	 * port, try to use the CRT ddc to read the EDID for DVI-connector.
+	 */
+	if (edid == NULL)
+		edid = intel_sdvo_get_analog_edid(connector);
+
+	status = connector_status_unknown;
+	if (edid != NULL) {
+		/* DDC bus is shared, match EDID to connector type */
+		if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+			status = connector_status_connected;
+			if (intel_sdvo->is_hdmi) {
+				intel_sdvo->has_hdmi_monitor = drm_detect_hdmi_monitor(edid);
+				intel_sdvo->has_hdmi_audio = drm_detect_monitor_audio(edid);
+			}
+		} else
+			status = connector_status_disconnected;
+		connector->display_info.raw_edid = NULL;
+		kfree(edid);
+	}
+
+	if (status == connector_status_connected) {
+		struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
+		if (intel_sdvo_connector->force_audio != HDMI_AUDIO_AUTO)
+			intel_sdvo->has_hdmi_audio = (intel_sdvo_connector->force_audio == HDMI_AUDIO_ON);
+	}
+
+	return status;
+}
+
+static bool
+intel_sdvo_connector_matches_edid(struct intel_sdvo_connector *sdvo,
+				  struct edid *edid)
+{
+	bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL);
+	bool connector_is_digital = !!IS_DIGITAL(sdvo);
+
+	DRM_DEBUG_KMS("connector_is_digital? %d, monitor_is_digital? %d\n",
+		      connector_is_digital, monitor_is_digital);
+	return connector_is_digital == monitor_is_digital;
+}
+
+static enum drm_connector_status
+intel_sdvo_detect(struct drm_connector *connector, bool force)
+{
+	uint16_t response;
+	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
+	struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
+	enum drm_connector_status ret;
+
+	if (!intel_sdvo_write_cmd(intel_sdvo,
+				  SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0))
+		return connector_status_unknown;
+
+	/* add 30ms delay when the output type might be TV */
+	if (intel_sdvo->caps.output_flags &
+	    (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_CVBS0))
+		mdelay(30);
+
+	if (!intel_sdvo_read_response(intel_sdvo, &response, 2))
+		return connector_status_unknown;
+
+	DRM_DEBUG_KMS("SDVO response %d %d [%x]\n",
+		      response & 0xff, response >> 8,
+		      intel_sdvo_connector->output_flag);
+
+	if (response == 0)
+		return connector_status_disconnected;
+
+	intel_sdvo->attached_output = response;
+
+	intel_sdvo->has_hdmi_monitor = false;
+	intel_sdvo->has_hdmi_audio = false;
+
+	if ((intel_sdvo_connector->output_flag & response) == 0)
+		ret = connector_status_disconnected;
+	else if (IS_TMDS(intel_sdvo_connector))
+		ret = intel_sdvo_tmds_sink_detect(connector);
+	else {
+		struct edid *edid;
+
+		/* if we have an edid check it matches the connection */
+		edid = intel_sdvo_get_edid(connector);
+		if (edid == NULL)
+			edid = intel_sdvo_get_analog_edid(connector);
+		if (edid != NULL) {
+			if (intel_sdvo_connector_matches_edid(intel_sdvo_connector,
+							      edid))
+				ret = connector_status_connected;
+			else
+				ret = connector_status_disconnected;
+
+			connector->display_info.raw_edid = NULL;
+			kfree(edid);
+		} else
+			ret = connector_status_connected;
+	}
+
+	/* May update encoder flag for like clock for SDVO TV, etc.*/
+	if (ret == connector_status_connected) {
+		intel_sdvo->is_tv = false;
+		intel_sdvo->is_lvds = false;
+		intel_sdvo->base.needs_tv_clock = false;
+
+		if (response & SDVO_TV_MASK) {
+			intel_sdvo->is_tv = true;
+			intel_sdvo->base.needs_tv_clock = true;
+		}
+		if (response & SDVO_LVDS_MASK)
+			intel_sdvo->is_lvds = intel_sdvo->sdvo_lvds_fixed_mode != NULL;
+	}
+
+	return ret;
+}
+
+static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
+{
+	struct edid *edid;
+
+	/* set the bus switch and get the modes */
+	edid = intel_sdvo_get_edid(connector);
+
+	/*
+	 * Mac mini hack.  On this device, the DVI-I connector shares one DDC
+	 * link between analog and digital outputs. So, if the regular SDVO
+	 * DDC fails, check to see if the analog output is disconnected, in
+	 * which case we'll look there for the digital DDC data.
+	 */
+	if (edid == NULL)
+		edid = intel_sdvo_get_analog_edid(connector);
+
+	if (edid != NULL) {
+		if (intel_sdvo_connector_matches_edid(to_intel_sdvo_connector(connector),
+						      edid)) {
+			drm_mode_connector_update_edid_property(connector, edid);
+			drm_add_edid_modes(connector, edid);
+		}
+
+		connector->display_info.raw_edid = NULL;
+		kfree(edid);
+	}
+}
+
+/*
+ * Set of SDVO TV modes.
+ * Note!  This is in reply order (see loop in get_tv_modes).
+ * XXX: all 60Hz refresh?
+ */
+static const struct drm_display_mode sdvo_tv_modes[] = {
+	{ DRM_MODE("320x200", DRM_MODE_TYPE_DRIVER, 5815, 320, 321, 384,
+		   416, 0, 200, 201, 232, 233, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("320x240", DRM_MODE_TYPE_DRIVER, 6814, 320, 321, 384,
+		   416, 0, 240, 241, 272, 273, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("400x300", DRM_MODE_TYPE_DRIVER, 9910, 400, 401, 464,
+		   496, 0, 300, 301, 332, 333, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 16913, 640, 641, 704,
+		   736, 0, 350, 351, 382, 383, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 19121, 640, 641, 704,
+		   736, 0, 400, 401, 432, 433, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 22654, 640, 641, 704,
+		   736, 0, 480, 481, 512, 513, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("704x480", DRM_MODE_TYPE_DRIVER, 24624, 704, 705, 768,
+		   800, 0, 480, 481, 512, 513, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("704x576", DRM_MODE_TYPE_DRIVER, 29232, 704, 705, 768,
+		   800, 0, 576, 577, 608, 609, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("720x350", DRM_MODE_TYPE_DRIVER, 18751, 720, 721, 784,
+		   816, 0, 350, 351, 382, 383, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 21199, 720, 721, 784,
+		   816, 0, 400, 401, 432, 433, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 25116, 720, 721, 784,
+		   816, 0, 480, 481, 512, 513, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("720x540", DRM_MODE_TYPE_DRIVER, 28054, 720, 721, 784,
+		   816, 0, 540, 541, 572, 573, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 29816, 720, 721, 784,
+		   816, 0, 576, 577, 608, 609, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("768x576", DRM_MODE_TYPE_DRIVER, 31570, 768, 769, 832,
+		   864, 0, 576, 577, 608, 609, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 34030, 800, 801, 864,
+		   896, 0, 600, 601, 632, 633, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 36581, 832, 833, 896,
+		   928, 0, 624, 625, 656, 657, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("920x766", DRM_MODE_TYPE_DRIVER, 48707, 920, 921, 984,
+		   1016, 0, 766, 767, 798, 799, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 53827, 1024, 1025, 1088,
+		   1120, 0, 768, 769, 800, 801, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+	{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 87265, 1280, 1281, 1344,
+		   1376, 0, 1024, 1025, 1056, 1057, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
+};
+
+static void intel_sdvo_get_tv_modes(struct drm_connector *connector)
+{
+	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
+	struct intel_sdvo_sdtv_resolution_request tv_res;
+	uint32_t reply = 0, format_map = 0;
+	int i;
+
+	/* Read the list of supported input resolutions for the selected TV
+	 * format.
+	 */
+	format_map = 1 << intel_sdvo->tv_format_index;
+	memcpy(&tv_res, &format_map,
+	       min(sizeof(format_map), sizeof(struct intel_sdvo_sdtv_resolution_request)));
+
+	if (!intel_sdvo_set_target_output(intel_sdvo, intel_sdvo->attached_output))
+		return;
+
+	BUILD_BUG_ON(sizeof(tv_res) != 3);
+	if (!intel_sdvo_write_cmd(intel_sdvo,
+				  SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT,
+				  &tv_res, sizeof(tv_res)))
+		return;
+	if (!intel_sdvo_read_response(intel_sdvo, &reply, 3))
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(sdvo_tv_modes); i++)
+		if (reply & (1 << i)) {
+			struct drm_display_mode *nmode;
+			nmode = drm_mode_duplicate(connector->dev,
+						   &sdvo_tv_modes[i]);
+			if (nmode)
+				drm_mode_probed_add(connector, nmode);
+		}
+}
+
+static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
+{
+	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	struct drm_display_mode *newmode;
+
+	/*
+	 * Attempt to get the mode list from DDC.
+	 * Assume that the preferred modes are
+	 * arranged in priority order.
+	 */
+	intel_ddc_get_modes(connector, intel_sdvo->i2c);
+	if (list_empty(&connector->probed_modes) == false)
+		goto end;
+
+	/* Fetch modes from VBT */
+	if (dev_priv->sdvo_lvds_vbt_mode != NULL) {
+		newmode = drm_mode_duplicate(connector->dev,
+					     dev_priv->sdvo_lvds_vbt_mode);
+		if (newmode != NULL) {
+			/* Guarantee the mode is preferred */
+			newmode->type = (DRM_MODE_TYPE_PREFERRED |
+					 DRM_MODE_TYPE_DRIVER);
+			drm_mode_probed_add(connector, newmode);
+		}
+	}
+
+end:
+	list_for_each_entry(newmode, &connector->probed_modes, head) {
+		if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
+			intel_sdvo->sdvo_lvds_fixed_mode =
+				drm_mode_duplicate(connector->dev, newmode);
+
+			drm_mode_set_crtcinfo(intel_sdvo->sdvo_lvds_fixed_mode,
+					      0);
+
+			intel_sdvo->is_lvds = true;
+			break;
+		}
+	}
+
+}
+
+static int intel_sdvo_get_modes(struct drm_connector *connector)
+{
+	struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
+
+	if (IS_TV(intel_sdvo_connector))
+		intel_sdvo_get_tv_modes(connector);
+	else if (IS_LVDS(intel_sdvo_connector))
+		intel_sdvo_get_lvds_modes(connector);
+	else
+		intel_sdvo_get_ddc_modes(connector);
+
+	return !list_empty(&connector->probed_modes);
+}
+
+static void
+intel_sdvo_destroy_enhance_property(struct drm_connector *connector)
+{
+	struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
+	struct drm_device *dev = connector->dev;
+
+	if (intel_sdvo_connector->left)
+		drm_property_destroy(dev, intel_sdvo_connector->left);
+	if (intel_sdvo_connector->right)
+		drm_property_destroy(dev, intel_sdvo_connector->right);
+	if (intel_sdvo_connector->top)
+		drm_property_destroy(dev, intel_sdvo_connector->top);
+	if (intel_sdvo_connector->bottom)
+		drm_property_destroy(dev, intel_sdvo_connector->bottom);
+	if (intel_sdvo_connector->hpos)
+		drm_property_destroy(dev, intel_sdvo_connector->hpos);
+	if (intel_sdvo_connector->vpos)
+		drm_property_destroy(dev, intel_sdvo_connector->vpos);
+	if (intel_sdvo_connector->saturation)
+		drm_property_destroy(dev, intel_sdvo_connector->saturation);
+	if (intel_sdvo_connector->contrast)
+		drm_property_destroy(dev, intel_sdvo_connector->contrast);
+	if (intel_sdvo_connector->hue)
+		drm_property_destroy(dev, intel_sdvo_connector->hue);
+	if (intel_sdvo_connector->sharpness)
+		drm_property_destroy(dev, intel_sdvo_connector->sharpness);
+	if (intel_sdvo_connector->flicker_filter)
+		drm_property_destroy(dev, intel_sdvo_connector->flicker_filter);
+	if (intel_sdvo_connector->flicker_filter_2d)
+		drm_property_destroy(dev, intel_sdvo_connector->flicker_filter_2d);
+	if (intel_sdvo_connector->flicker_filter_adaptive)
+		drm_property_destroy(dev, intel_sdvo_connector->flicker_filter_adaptive);
+	if (intel_sdvo_connector->tv_luma_filter)
+		drm_property_destroy(dev, intel_sdvo_connector->tv_luma_filter);
+	if (intel_sdvo_connector->tv_chroma_filter)
+		drm_property_destroy(dev, intel_sdvo_connector->tv_chroma_filter);
+	if (intel_sdvo_connector->dot_crawl)
+		drm_property_destroy(dev, intel_sdvo_connector->dot_crawl);
+	if (intel_sdvo_connector->brightness)
+		drm_property_destroy(dev, intel_sdvo_connector->brightness);
+}
+
+static void intel_sdvo_destroy(struct drm_connector *connector)
+{
+	struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
+
+	if (intel_sdvo_connector->tv_format)
+		drm_property_destroy(connector->dev,
+				     intel_sdvo_connector->tv_format);
+
+	intel_sdvo_destroy_enhance_property(connector);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static bool intel_sdvo_detect_hdmi_audio(struct drm_connector *connector)
+{
+	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
+	struct edid *edid;
+	bool has_audio = false;
+
+	if (!intel_sdvo->is_hdmi)
+		return false;
+
+	edid = intel_sdvo_get_edid(connector);
+	if (edid != NULL && edid->input & DRM_EDID_INPUT_DIGITAL)
+		has_audio = drm_detect_monitor_audio(edid);
+
+	return has_audio;
+}
+
+static int
+intel_sdvo_set_property(struct drm_connector *connector,
+			struct drm_property *property,
+			uint64_t val)
+{
+	struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
+	struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	uint16_t temp_value;
+	uint8_t cmd;
+	int ret;
+
+	ret = drm_connector_property_set_value(connector, property, val);
+	if (ret)
+		return ret;
+
+	if (property == dev_priv->force_audio_property) {
+		int i = val;
+		bool has_audio;
+
+		if (i == intel_sdvo_connector->force_audio)
+			return 0;
+
+		intel_sdvo_connector->force_audio = i;
+
+		if (i == HDMI_AUDIO_AUTO)
+			has_audio = intel_sdvo_detect_hdmi_audio(connector);
+		else
+			has_audio = (i == HDMI_AUDIO_ON);
+
+		if (has_audio == intel_sdvo->has_hdmi_audio)
+			return 0;
+
+		intel_sdvo->has_hdmi_audio = has_audio;
+		goto done;
+	}
+
+	if (property == dev_priv->broadcast_rgb_property) {
+		if (val == !!intel_sdvo->color_range)
+			return 0;
+
+		intel_sdvo->color_range = val ? SDVO_COLOR_RANGE_16_235 : 0;
+		goto done;
+	}
+
+#define CHECK_PROPERTY(name, NAME) \
+	if (intel_sdvo_connector->name == property) { \
+		if (intel_sdvo_connector->cur_##name == temp_value) return 0; \
+		if (intel_sdvo_connector->max_##name < temp_value) return -EINVAL; \
+		cmd = SDVO_CMD_SET_##NAME; \
+		intel_sdvo_connector->cur_##name = temp_value; \
+		goto set_value; \
+	}
+
+	if (property == intel_sdvo_connector->tv_format) {
+		if (val >= TV_FORMAT_NUM)
+			return -EINVAL;
+
+		if (intel_sdvo->tv_format_index ==
+		    intel_sdvo_connector->tv_format_supported[val])
+			return 0;
+
+		intel_sdvo->tv_format_index = intel_sdvo_connector->tv_format_supported[val];
+		goto done;
+	} else if (IS_TV_OR_LVDS(intel_sdvo_connector)) {
+		temp_value = val;
+		if (intel_sdvo_connector->left == property) {
+			drm_connector_property_set_value(connector,
+							 intel_sdvo_connector->right, val);
+			if (intel_sdvo_connector->left_margin == temp_value)
+				return 0;
+
+			intel_sdvo_connector->left_margin = temp_value;
+			intel_sdvo_connector->right_margin = temp_value;
+			temp_value = intel_sdvo_connector->max_hscan -
+				intel_sdvo_connector->left_margin;
+			cmd = SDVO_CMD_SET_OVERSCAN_H;
+			goto set_value;
+		} else if (intel_sdvo_connector->right == property) {
+			drm_connector_property_set_value(connector,
+							 intel_sdvo_connector->left, val);
+			if (intel_sdvo_connector->right_margin == temp_value)
+				return 0;
+
+			intel_sdvo_connector->left_margin = temp_value;
+			intel_sdvo_connector->right_margin = temp_value;
+			temp_value = intel_sdvo_connector->max_hscan -
+				intel_sdvo_connector->left_margin;
+			cmd = SDVO_CMD_SET_OVERSCAN_H;
+			goto set_value;
+		} else if (intel_sdvo_connector->top == property) {
+			drm_connector_property_set_value(connector,
+							 intel_sdvo_connector->bottom, val);
+			if (intel_sdvo_connector->top_margin == temp_value)
+				return 0;
+
+			intel_sdvo_connector->top_margin = temp_value;
+			intel_sdvo_connector->bottom_margin = temp_value;
+			temp_value = intel_sdvo_connector->max_vscan -
+				intel_sdvo_connector->top_margin;
+			cmd = SDVO_CMD_SET_OVERSCAN_V;
+			goto set_value;
+		} else if (intel_sdvo_connector->bottom == property) {
+			drm_connector_property_set_value(connector,
+							 intel_sdvo_connector->top, val);
+			if (intel_sdvo_connector->bottom_margin == temp_value)
+				return 0;
+
+			intel_sdvo_connector->top_margin = temp_value;
+			intel_sdvo_connector->bottom_margin = temp_value;
+			temp_value = intel_sdvo_connector->max_vscan -
+				intel_sdvo_connector->top_margin;
+			cmd = SDVO_CMD_SET_OVERSCAN_V;
+			goto set_value;
+		}
+		CHECK_PROPERTY(hpos, HPOS)
+		CHECK_PROPERTY(vpos, VPOS)
+		CHECK_PROPERTY(saturation, SATURATION)
+		CHECK_PROPERTY(contrast, CONTRAST)
+		CHECK_PROPERTY(hue, HUE)
+		CHECK_PROPERTY(brightness, BRIGHTNESS)
+		CHECK_PROPERTY(sharpness, SHARPNESS)
+		CHECK_PROPERTY(flicker_filter, FLICKER_FILTER)
+		CHECK_PROPERTY(flicker_filter_2d, FLICKER_FILTER_2D)
+		CHECK_PROPERTY(flicker_filter_adaptive, FLICKER_FILTER_ADAPTIVE)
+		CHECK_PROPERTY(tv_chroma_filter, TV_CHROMA_FILTER)
+		CHECK_PROPERTY(tv_luma_filter, TV_LUMA_FILTER)
+		CHECK_PROPERTY(dot_crawl, DOT_CRAWL)
+	}
+
+	return -EINVAL; /* unknown property */
+
+set_value:
+	if (!intel_sdvo_set_value(intel_sdvo, cmd, &temp_value, 2))
+		return -EIO;
+
+
+done:
+	if (intel_sdvo->base.base.crtc) {
+		struct drm_crtc *crtc = intel_sdvo->base.base.crtc;
+		drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x,
+					 crtc->y, crtc->fb);
+	}
+
+	return 0;
+#undef CHECK_PROPERTY
+}
+
+static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
+	.dpms = intel_sdvo_dpms,
+	.mode_fixup = intel_sdvo_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.mode_set = intel_sdvo_mode_set,
+	.commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = intel_sdvo_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = intel_sdvo_set_property,
+	.destroy = intel_sdvo_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_sdvo_connector_helper_funcs = {
+	.get_modes = intel_sdvo_get_modes,
+	.mode_valid = intel_sdvo_mode_valid,
+	.best_encoder = intel_best_encoder,
+};
+
+static void intel_sdvo_enc_destroy(struct drm_encoder *encoder)
+{
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder);
+
+	if (intel_sdvo->sdvo_lvds_fixed_mode != NULL)
+		drm_mode_destroy(encoder->dev,
+				 intel_sdvo->sdvo_lvds_fixed_mode);
+
+	i2c_del_adapter(&intel_sdvo->ddc);
+	intel_encoder_destroy(encoder);
+}
+
+static const struct drm_encoder_funcs intel_sdvo_enc_funcs = {
+	.destroy = intel_sdvo_enc_destroy,
+};
+
+static void
+intel_sdvo_guess_ddc_bus(struct intel_sdvo *sdvo)
+{
+	uint16_t mask = 0;
+	unsigned int num_bits;
+
+	/* Make a mask of outputs less than or equal to our own priority in the
+	 * list.
+	 */
+	switch (sdvo->controlled_output) {
+	case SDVO_OUTPUT_LVDS1:
+		mask |= SDVO_OUTPUT_LVDS1;
+	case SDVO_OUTPUT_LVDS0:
+		mask |= SDVO_OUTPUT_LVDS0;
+	case SDVO_OUTPUT_TMDS1:
+		mask |= SDVO_OUTPUT_TMDS1;
+	case SDVO_OUTPUT_TMDS0:
+		mask |= SDVO_OUTPUT_TMDS0;
+	case SDVO_OUTPUT_RGB1:
+		mask |= SDVO_OUTPUT_RGB1;
+	case SDVO_OUTPUT_RGB0:
+		mask |= SDVO_OUTPUT_RGB0;
+		break;
+	}
+
+	/* Count bits to find what number we are in the priority list. */
+	mask &= sdvo->caps.output_flags;
+	num_bits = hweight16(mask);
+	/* If more than 3 outputs, default to DDC bus 3 for now. */
+	if (num_bits > 3)
+		num_bits = 3;
+
+	/* Corresponds to SDVO_CONTROL_BUS_DDCx */
+	sdvo->ddc_bus = 1 << num_bits;
+}
+
+/**
+ * Choose the appropriate DDC bus for control bus switch command for this
+ * SDVO output based on the controlled output.
+ *
+ * DDC bus number assignment is in a priority order of RGB outputs, then TMDS
+ * outputs, then LVDS outputs.
+ */
+static void
+intel_sdvo_select_ddc_bus(struct drm_i915_private *dev_priv,
+			  struct intel_sdvo *sdvo, u32 reg)
+{
+	struct sdvo_device_mapping *mapping;
+
+	if (IS_SDVOB(reg))
+		mapping = &(dev_priv->sdvo_mappings[0]);
+	else
+		mapping = &(dev_priv->sdvo_mappings[1]);
+
+	if (mapping->initialized)
+		sdvo->ddc_bus = 1 << ((mapping->ddc_pin & 0xf0) >> 4);
+	else
+		intel_sdvo_guess_ddc_bus(sdvo);
+}
+
+static void
+intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv,
+			  struct intel_sdvo *sdvo, u32 reg)
+{
+	struct sdvo_device_mapping *mapping;
+	u8 pin;
+
+	if (IS_SDVOB(reg))
+		mapping = &dev_priv->sdvo_mappings[0];
+	else
+		mapping = &dev_priv->sdvo_mappings[1];
+
+	pin = GMBUS_PORT_DPB;
+	if (mapping->initialized)
+		pin = mapping->i2c_pin;
+
+	if (pin < GMBUS_NUM_PORTS) {
+		sdvo->i2c = &dev_priv->gmbus[pin].adapter;
+		intel_gmbus_set_speed(sdvo->i2c, GMBUS_RATE_1MHZ);
+		intel_gmbus_force_bit(sdvo->i2c, true);
+	} else {
+		sdvo->i2c = &dev_priv->gmbus[GMBUS_PORT_DPB].adapter;
+	}
+}
+
+static bool
+intel_sdvo_is_hdmi_connector(struct intel_sdvo *intel_sdvo, int device)
+{
+	return intel_sdvo_check_supp_encode(intel_sdvo);
+}
+
+static u8
+intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct sdvo_device_mapping *my_mapping, *other_mapping;
+
+	if (IS_SDVOB(sdvo_reg)) {
+		my_mapping = &dev_priv->sdvo_mappings[0];
+		other_mapping = &dev_priv->sdvo_mappings[1];
+	} else {
+		my_mapping = &dev_priv->sdvo_mappings[1];
+		other_mapping = &dev_priv->sdvo_mappings[0];
+	}
+
+	/* If the BIOS described our SDVO device, take advantage of it. */
+	if (my_mapping->slave_addr)
+		return my_mapping->slave_addr;
+
+	/* If the BIOS only described a different SDVO device, use the
+	 * address that it isn't using.
+	 */
+	if (other_mapping->slave_addr) {
+		if (other_mapping->slave_addr == 0x70)
+			return 0x72;
+		else
+			return 0x70;
+	}
+
+	/* No SDVO device info is found for another DVO port,
+	 * so use mapping assumption we had before BIOS parsing.
+	 */
+	if (IS_SDVOB(sdvo_reg))
+		return 0x70;
+	else
+		return 0x72;
+}
+
+static void
+intel_sdvo_connector_init(struct intel_sdvo_connector *connector,
+			  struct intel_sdvo *encoder)
+{
+	drm_connector_init(encoder->base.base.dev,
+			   &connector->base.base,
+			   &intel_sdvo_connector_funcs,
+			   connector->base.base.connector_type);
+
+	drm_connector_helper_add(&connector->base.base,
+				 &intel_sdvo_connector_helper_funcs);
+
+	connector->base.base.interlace_allowed = 1;
+	connector->base.base.doublescan_allowed = 0;
+	connector->base.base.display_info.subpixel_order = SubPixelHorizontalRGB;
+
+	intel_connector_attach_encoder(&connector->base, &encoder->base);
+	drm_sysfs_connector_add(&connector->base.base);
+}
+
+static void
+intel_sdvo_add_hdmi_properties(struct intel_sdvo_connector *connector)
+{
+	struct drm_device *dev = connector->base.base.dev;
+
+	intel_attach_force_audio_property(&connector->base.base);
+	if (INTEL_INFO(dev)->gen >= 4 && IS_MOBILE(dev))
+		intel_attach_broadcast_rgb_property(&connector->base.base);
+}
+
+static bool
+intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
+{
+	struct drm_encoder *encoder = &intel_sdvo->base.base;
+	struct drm_connector *connector;
+	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+	struct intel_connector *intel_connector;
+	struct intel_sdvo_connector *intel_sdvo_connector;
+
+	intel_sdvo_connector = kzalloc(sizeof(struct intel_sdvo_connector), GFP_KERNEL);
+	if (!intel_sdvo_connector)
+		return false;
+
+	if (device == 0) {
+		intel_sdvo->controlled_output |= SDVO_OUTPUT_TMDS0;
+		intel_sdvo_connector->output_flag = SDVO_OUTPUT_TMDS0;
+	} else if (device == 1) {
+		intel_sdvo->controlled_output |= SDVO_OUTPUT_TMDS1;
+		intel_sdvo_connector->output_flag = SDVO_OUTPUT_TMDS1;
+	}
+
+	intel_connector = &intel_sdvo_connector->base;
+	connector = &intel_connector->base;
+	if (intel_sdvo_supports_hotplug(intel_sdvo) & (1 << device)) {
+		connector->polled = DRM_CONNECTOR_POLL_HPD;
+		intel_sdvo->hotplug_active[0] |= 1 << device;
+		/* Some SDVO devices have one-shot hotplug interrupts.
+		 * Ensure that they get re-enabled when an interrupt happens.
+		 */
+		intel_encoder->hot_plug = intel_sdvo_enable_hotplug;
+		intel_sdvo_enable_hotplug(intel_encoder);
+	}
+	else
+		connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
+	encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
+	connector->connector_type = DRM_MODE_CONNECTOR_DVID;
+
+	if (intel_sdvo_is_hdmi_connector(intel_sdvo, device)) {
+		connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+		intel_sdvo->is_hdmi = true;
+	}
+	intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+				       (1 << INTEL_ANALOG_CLONE_BIT));
+
+	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
+	if (intel_sdvo->is_hdmi)
+		intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
+
+	return true;
+}
+
+static bool
+intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type)
+{
+	struct drm_encoder *encoder = &intel_sdvo->base.base;
+	struct drm_connector *connector;
+	struct intel_connector *intel_connector;
+	struct intel_sdvo_connector *intel_sdvo_connector;
+
+	intel_sdvo_connector = kzalloc(sizeof(struct intel_sdvo_connector), GFP_KERNEL);
+	if (!intel_sdvo_connector)
+		return false;
+
+	intel_connector = &intel_sdvo_connector->base;
+	connector = &intel_connector->base;
+	encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
+	connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
+
+	intel_sdvo->controlled_output |= type;
+	intel_sdvo_connector->output_flag = type;
+
+	intel_sdvo->is_tv = true;
+	intel_sdvo->base.needs_tv_clock = true;
+	intel_sdvo->base.clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
+
+	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
+
+	if (!intel_sdvo_tv_create_property(intel_sdvo, intel_sdvo_connector, type))
+		goto err;
+
+	if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector))
+		goto err;
+
+	return true;
+
+err:
+	intel_sdvo_destroy(connector);
+	return false;
+}
+
+static bool
+intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device)
+{
+	struct drm_encoder *encoder = &intel_sdvo->base.base;
+	struct drm_connector *connector;
+	struct intel_connector *intel_connector;
+	struct intel_sdvo_connector *intel_sdvo_connector;
+
+	intel_sdvo_connector = kzalloc(sizeof(struct intel_sdvo_connector), GFP_KERNEL);
+	if (!intel_sdvo_connector)
+		return false;
+
+	intel_connector = &intel_sdvo_connector->base;
+	connector = &intel_connector->base;
+	connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+	encoder->encoder_type = DRM_MODE_ENCODER_DAC;
+	connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+
+	if (device == 0) {
+		intel_sdvo->controlled_output |= SDVO_OUTPUT_RGB0;
+		intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB0;
+	} else if (device == 1) {
+		intel_sdvo->controlled_output |= SDVO_OUTPUT_RGB1;
+		intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB1;
+	}
+
+	intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+				       (1 << INTEL_ANALOG_CLONE_BIT));
+
+	intel_sdvo_connector_init(intel_sdvo_connector,
+				  intel_sdvo);
+	return true;
+}
+
+static bool
+intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device)
+{
+	struct drm_encoder *encoder = &intel_sdvo->base.base;
+	struct drm_connector *connector;
+	struct intel_connector *intel_connector;
+	struct intel_sdvo_connector *intel_sdvo_connector;
+
+	intel_sdvo_connector = kzalloc(sizeof(struct intel_sdvo_connector), GFP_KERNEL);
+	if (!intel_sdvo_connector)
+		return false;
+
+	intel_connector = &intel_sdvo_connector->base;
+	connector = &intel_connector->base;
+	encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
+	connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
+
+	if (device == 0) {
+		intel_sdvo->controlled_output |= SDVO_OUTPUT_LVDS0;
+		intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS0;
+	} else if (device == 1) {
+		intel_sdvo->controlled_output |= SDVO_OUTPUT_LVDS1;
+		intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1;
+	}
+
+	intel_sdvo->base.clone_mask = ((1 << INTEL_ANALOG_CLONE_BIT) |
+				       (1 << INTEL_SDVO_LVDS_CLONE_BIT));
+
+	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
+	if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector))
+		goto err;
+
+	return true;
+
+err:
+	intel_sdvo_destroy(connector);
+	return false;
+}
+
+static bool
+intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags)
+{
+	intel_sdvo->is_tv = false;
+	intel_sdvo->base.needs_tv_clock = false;
+	intel_sdvo->is_lvds = false;
+
+	/* SDVO requires XXX1 function may not exist unless it has XXX0 function.*/
+
+	if (flags & SDVO_OUTPUT_TMDS0)
+		if (!intel_sdvo_dvi_init(intel_sdvo, 0))
+			return false;
+
+	if ((flags & SDVO_TMDS_MASK) == SDVO_TMDS_MASK)
+		if (!intel_sdvo_dvi_init(intel_sdvo, 1))
+			return false;
+
+	/* TV has no XXX1 function block */
+	if (flags & SDVO_OUTPUT_SVID0)
+		if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_SVID0))
+			return false;
+
+	if (flags & SDVO_OUTPUT_CVBS0)
+		if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_CVBS0))
+			return false;
+
+	if (flags & SDVO_OUTPUT_RGB0)
+		if (!intel_sdvo_analog_init(intel_sdvo, 0))
+			return false;
+
+	if ((flags & SDVO_RGB_MASK) == SDVO_RGB_MASK)
+		if (!intel_sdvo_analog_init(intel_sdvo, 1))
+			return false;
+
+	if (flags & SDVO_OUTPUT_LVDS0)
+		if (!intel_sdvo_lvds_init(intel_sdvo, 0))
+			return false;
+
+	if ((flags & SDVO_LVDS_MASK) == SDVO_LVDS_MASK)
+		if (!intel_sdvo_lvds_init(intel_sdvo, 1))
+			return false;
+
+	if ((flags & SDVO_OUTPUT_MASK) == 0) {
+		unsigned char bytes[2];
+
+		intel_sdvo->controlled_output = 0;
+		memcpy(bytes, &intel_sdvo->caps.output_flags, 2);
+		DRM_DEBUG_KMS("%s: Unknown SDVO output type (0x%02x%02x)\n",
+			      SDVO_NAME(intel_sdvo),
+			      bytes[0], bytes[1]);
+		return false;
+	}
+	intel_sdvo->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+
+	return true;
+}
+
+static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
+					  struct intel_sdvo_connector *intel_sdvo_connector,
+					  int type)
+{
+	struct drm_device *dev = intel_sdvo->base.base.dev;
+	struct intel_sdvo_tv_format format;
+	uint32_t format_map, i;
+
+	if (!intel_sdvo_set_target_output(intel_sdvo, type))
+		return false;
+
+	BUILD_BUG_ON(sizeof(format) != 6);
+	if (!intel_sdvo_get_value(intel_sdvo,
+				  SDVO_CMD_GET_SUPPORTED_TV_FORMATS,
+				  &format, sizeof(format)))
+		return false;
+
+	memcpy(&format_map, &format, min(sizeof(format_map), sizeof(format)));
+
+	if (format_map == 0)
+		return false;
+
+	intel_sdvo_connector->format_supported_num = 0;
+	for (i = 0 ; i < TV_FORMAT_NUM; i++)
+		if (format_map & (1 << i))
+			intel_sdvo_connector->tv_format_supported[intel_sdvo_connector->format_supported_num++] = i;
+
+
+	intel_sdvo_connector->tv_format =
+			drm_property_create(dev, DRM_MODE_PROP_ENUM,
+					    "mode", intel_sdvo_connector->format_supported_num);
+	if (!intel_sdvo_connector->tv_format)
+		return false;
+
+	for (i = 0; i < intel_sdvo_connector->format_supported_num; i++)
+		drm_property_add_enum(
+				intel_sdvo_connector->tv_format, i,
+				i, tv_format_names[intel_sdvo_connector->tv_format_supported[i]]);
+
+	intel_sdvo->tv_format_index = intel_sdvo_connector->tv_format_supported[0];
+	drm_connector_attach_property(&intel_sdvo_connector->base.base,
+				      intel_sdvo_connector->tv_format, 0);
+	return true;
+
+}
+
+#define ENHANCEMENT(name, NAME) do { \
+	if (enhancements.name) { \
+		if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_MAX_##NAME, &data_value, 4) || \
+		    !intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_##NAME, &response, 2)) \
+			return false; \
+		intel_sdvo_connector->max_##name = data_value[0]; \
+		intel_sdvo_connector->cur_##name = response; \
+		intel_sdvo_connector->name = \
+			drm_property_create_range(dev, 0, #name, 0, data_value[0]); \
+		if (!intel_sdvo_connector->name) return false; \
+		drm_connector_attach_property(connector, \
+					      intel_sdvo_connector->name, \
+					      intel_sdvo_connector->cur_##name); \
+		DRM_DEBUG_KMS(#name ": max %d, default %d, current %d\n", \
+			      data_value[0], data_value[1], response); \
+	} \
+} while (0)
+
+static bool
+intel_sdvo_create_enhance_property_tv(struct intel_sdvo *intel_sdvo,
+				      struct intel_sdvo_connector *intel_sdvo_connector,
+				      struct intel_sdvo_enhancements_reply enhancements)
+{
+	struct drm_device *dev = intel_sdvo->base.base.dev;
+	struct drm_connector *connector = &intel_sdvo_connector->base.base;
+	uint16_t response, data_value[2];
+
+	/* when horizontal overscan is supported, Add the left/right  property */
+	if (enhancements.overscan_h) {
+		if (!intel_sdvo_get_value(intel_sdvo,
+					  SDVO_CMD_GET_MAX_OVERSCAN_H,
+					  &data_value, 4))
+			return false;
+
+		if (!intel_sdvo_get_value(intel_sdvo,
+					  SDVO_CMD_GET_OVERSCAN_H,
+					  &response, 2))
+			return false;
+
+		intel_sdvo_connector->max_hscan = data_value[0];
+		intel_sdvo_connector->left_margin = data_value[0] - response;
+		intel_sdvo_connector->right_margin = intel_sdvo_connector->left_margin;
+		intel_sdvo_connector->left =
+			drm_property_create_range(dev, 0, "left_margin", 0, data_value[0]);
+		if (!intel_sdvo_connector->left)
+			return false;
+
+		drm_connector_attach_property(connector,
+					      intel_sdvo_connector->left,
+					      intel_sdvo_connector->left_margin);
+
+		intel_sdvo_connector->right =
+			drm_property_create_range(dev, 0, "right_margin", 0, data_value[0]);
+		if (!intel_sdvo_connector->right)
+			return false;
+
+		drm_connector_attach_property(connector,
+					      intel_sdvo_connector->right,
+					      intel_sdvo_connector->right_margin);
+		DRM_DEBUG_KMS("h_overscan: max %d, "
+			      "default %d, current %d\n",
+			      data_value[0], data_value[1], response);
+	}
+
+	if (enhancements.overscan_v) {
+		if (!intel_sdvo_get_value(intel_sdvo,
+					  SDVO_CMD_GET_MAX_OVERSCAN_V,
+					  &data_value, 4))
+			return false;
+
+		if (!intel_sdvo_get_value(intel_sdvo,
+					  SDVO_CMD_GET_OVERSCAN_V,
+					  &response, 2))
+			return false;
+
+		intel_sdvo_connector->max_vscan = data_value[0];
+		intel_sdvo_connector->top_margin = data_value[0] - response;
+		intel_sdvo_connector->bottom_margin = intel_sdvo_connector->top_margin;
+		intel_sdvo_connector->top =
+			drm_property_create_range(dev, 0,
+					    "top_margin", 0, data_value[0]);
+		if (!intel_sdvo_connector->top)
+			return false;
+
+		drm_connector_attach_property(connector,
+					      intel_sdvo_connector->top,
+					      intel_sdvo_connector->top_margin);
+
+		intel_sdvo_connector->bottom =
+			drm_property_create_range(dev, 0,
+					    "bottom_margin", 0, data_value[0]);
+		if (!intel_sdvo_connector->bottom)
+			return false;
+
+		drm_connector_attach_property(connector,
+					      intel_sdvo_connector->bottom,
+					      intel_sdvo_connector->bottom_margin);
+		DRM_DEBUG_KMS("v_overscan: max %d, "
+			      "default %d, current %d\n",
+			      data_value[0], data_value[1], response);
+	}
+
+	ENHANCEMENT(hpos, HPOS);
+	ENHANCEMENT(vpos, VPOS);
+	ENHANCEMENT(saturation, SATURATION);
+	ENHANCEMENT(contrast, CONTRAST);
+	ENHANCEMENT(hue, HUE);
+	ENHANCEMENT(sharpness, SHARPNESS);
+	ENHANCEMENT(brightness, BRIGHTNESS);
+	ENHANCEMENT(flicker_filter, FLICKER_FILTER);
+	ENHANCEMENT(flicker_filter_adaptive, FLICKER_FILTER_ADAPTIVE);
+	ENHANCEMENT(flicker_filter_2d, FLICKER_FILTER_2D);
+	ENHANCEMENT(tv_chroma_filter, TV_CHROMA_FILTER);
+	ENHANCEMENT(tv_luma_filter, TV_LUMA_FILTER);
+
+	if (enhancements.dot_crawl) {
+		if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_DOT_CRAWL, &response, 2))
+			return false;
+
+		intel_sdvo_connector->max_dot_crawl = 1;
+		intel_sdvo_connector->cur_dot_crawl = response & 0x1;
+		intel_sdvo_connector->dot_crawl =
+			drm_property_create_range(dev, 0, "dot_crawl", 0, 1);
+		if (!intel_sdvo_connector->dot_crawl)
+			return false;
+
+		drm_connector_attach_property(connector,
+					      intel_sdvo_connector->dot_crawl,
+					      intel_sdvo_connector->cur_dot_crawl);
+		DRM_DEBUG_KMS("dot crawl: current %d\n", response);
+	}
+
+	return true;
+}
+
+static bool
+intel_sdvo_create_enhance_property_lvds(struct intel_sdvo *intel_sdvo,
+					struct intel_sdvo_connector *intel_sdvo_connector,
+					struct intel_sdvo_enhancements_reply enhancements)
+{
+	struct drm_device *dev = intel_sdvo->base.base.dev;
+	struct drm_connector *connector = &intel_sdvo_connector->base.base;
+	uint16_t response, data_value[2];
+
+	ENHANCEMENT(brightness, BRIGHTNESS);
+
+	return true;
+}
+#undef ENHANCEMENT
+
+static bool intel_sdvo_create_enhance_property(struct intel_sdvo *intel_sdvo,
+					       struct intel_sdvo_connector *intel_sdvo_connector)
+{
+	union {
+		struct intel_sdvo_enhancements_reply reply;
+		uint16_t response;
+	} enhancements;
+
+	BUILD_BUG_ON(sizeof(enhancements) != 2);
+
+	enhancements.response = 0;
+	intel_sdvo_get_value(intel_sdvo,
+			     SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS,
+			     &enhancements, sizeof(enhancements));
+	if (enhancements.response == 0) {
+		DRM_DEBUG_KMS("No enhancement is supported\n");
+		return true;
+	}
+
+	if (IS_TV(intel_sdvo_connector))
+		return intel_sdvo_create_enhance_property_tv(intel_sdvo, intel_sdvo_connector, enhancements.reply);
+	else if (IS_LVDS(intel_sdvo_connector))
+		return intel_sdvo_create_enhance_property_lvds(intel_sdvo, intel_sdvo_connector, enhancements.reply);
+	else
+		return true;
+}
+
+static int intel_sdvo_ddc_proxy_xfer(struct i2c_adapter *adapter,
+				     struct i2c_msg *msgs,
+				     int num)
+{
+	struct intel_sdvo *sdvo = adapter->algo_data;
+
+	if (!intel_sdvo_set_control_bus_switch(sdvo, sdvo->ddc_bus))
+		return -EIO;
+
+	return sdvo->i2c->algo->master_xfer(sdvo->i2c, msgs, num);
+}
+
+static u32 intel_sdvo_ddc_proxy_func(struct i2c_adapter *adapter)
+{
+	struct intel_sdvo *sdvo = adapter->algo_data;
+	return sdvo->i2c->algo->functionality(sdvo->i2c);
+}
+
+static const struct i2c_algorithm intel_sdvo_ddc_proxy = {
+	.master_xfer	= intel_sdvo_ddc_proxy_xfer,
+	.functionality	= intel_sdvo_ddc_proxy_func
+};
+
+static bool
+intel_sdvo_init_ddc_proxy(struct intel_sdvo *sdvo,
+			  struct drm_device *dev)
+{
+	sdvo->ddc.owner = THIS_MODULE;
+	sdvo->ddc.class = I2C_CLASS_DDC;
+	snprintf(sdvo->ddc.name, I2C_NAME_SIZE, "SDVO DDC proxy");
+	sdvo->ddc.dev.parent = &dev->pdev->dev;
+	sdvo->ddc.algo_data = sdvo;
+	sdvo->ddc.algo = &intel_sdvo_ddc_proxy;
+
+	return i2c_add_adapter(&sdvo->ddc) == 0;
+}
+
+bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_encoder *intel_encoder;
+	struct intel_sdvo *intel_sdvo;
+	int i;
+
+	intel_sdvo = kzalloc(sizeof(struct intel_sdvo), GFP_KERNEL);
+	if (!intel_sdvo)
+		return false;
+
+	intel_sdvo->sdvo_reg = sdvo_reg;
+	intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(dev, sdvo_reg) >> 1;
+	intel_sdvo_select_i2c_bus(dev_priv, intel_sdvo, sdvo_reg);
+	if (!intel_sdvo_init_ddc_proxy(intel_sdvo, dev)) {
+		kfree(intel_sdvo);
+		return false;
+	}
+
+	/* encoder type will be decided later */
+	intel_encoder = &intel_sdvo->base;
+	intel_encoder->type = INTEL_OUTPUT_SDVO;
+	drm_encoder_init(dev, &intel_encoder->base, &intel_sdvo_enc_funcs, 0);
+
+	/* Read the regs to test if we can talk to the device */
+	for (i = 0; i < 0x40; i++) {
+		u8 byte;
+
+		if (!intel_sdvo_read_byte(intel_sdvo, i, &byte)) {
+			DRM_DEBUG_KMS("No SDVO device found on SDVO%c\n",
+				      IS_SDVOB(sdvo_reg) ? 'B' : 'C');
+			goto err;
+		}
+	}
+
+	if (IS_SDVOB(sdvo_reg))
+		dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
+	else
+		dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
+
+	drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
+
+	/* In default case sdvo lvds is false */
+	if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
+		goto err;
+
+	/* Set up hotplug command - note paranoia about contents of reply.
+	 * We assume that the hardware is in a sane state, and only touch
+	 * the bits we think we understand.
+	 */
+	intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
+			     &intel_sdvo->hotplug_active, 2);
+	intel_sdvo->hotplug_active[0] &= ~0x3;
+
+	if (intel_sdvo_output_setup(intel_sdvo,
+				    intel_sdvo->caps.output_flags) != true) {
+		DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
+			      IS_SDVOB(sdvo_reg) ? 'B' : 'C');
+		goto err;
+	}
+
+	intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
+
+	/* Set the input timing to the screen. Assume always input 0. */
+	if (!intel_sdvo_set_target_input(intel_sdvo))
+		goto err;
+
+	if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo,
+						    &intel_sdvo->pixel_clock_min,
+						    &intel_sdvo->pixel_clock_max))
+		goto err;
+
+	DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, "
+			"clock range %dMHz - %dMHz, "
+			"input 1: %c, input 2: %c, "
+			"output 1: %c, output 2: %c\n",
+			SDVO_NAME(intel_sdvo),
+			intel_sdvo->caps.vendor_id, intel_sdvo->caps.device_id,
+			intel_sdvo->caps.device_rev_id,
+			intel_sdvo->pixel_clock_min / 1000,
+			intel_sdvo->pixel_clock_max / 1000,
+			(intel_sdvo->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N',
+			(intel_sdvo->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N',
+			/* check currently supported outputs */
+			intel_sdvo->caps.output_flags &
+			(SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N',
+			intel_sdvo->caps.output_flags &
+			(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
+	return true;
+
+err:
+	drm_encoder_cleanup(&intel_encoder->base);
+	i2c_del_adapter(&intel_sdvo->ddc);
+	kfree(intel_sdvo);
+
+	return false;
+}
diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h
new file mode 100644
index 00000000..9d030142
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h
@@ -0,0 +1,728 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+/**
+ * @file SDVO command definitions and structures.
+ */
+
+#define SDVO_OUTPUT_FIRST   (0)
+#define SDVO_OUTPUT_TMDS0   (1 << 0)
+#define SDVO_OUTPUT_RGB0    (1 << 1)
+#define SDVO_OUTPUT_CVBS0   (1 << 2)
+#define SDVO_OUTPUT_SVID0   (1 << 3)
+#define SDVO_OUTPUT_YPRPB0  (1 << 4)
+#define SDVO_OUTPUT_SCART0  (1 << 5)
+#define SDVO_OUTPUT_LVDS0   (1 << 6)
+#define SDVO_OUTPUT_TMDS1   (1 << 8)
+#define SDVO_OUTPUT_RGB1    (1 << 9)
+#define SDVO_OUTPUT_CVBS1   (1 << 10)
+#define SDVO_OUTPUT_SVID1   (1 << 11)
+#define SDVO_OUTPUT_YPRPB1  (1 << 12)
+#define SDVO_OUTPUT_SCART1  (1 << 13)
+#define SDVO_OUTPUT_LVDS1   (1 << 14)
+#define SDVO_OUTPUT_LAST    (14)
+
+struct intel_sdvo_caps {
+	u8 vendor_id;
+	u8 device_id;
+	u8 device_rev_id;
+	u8 sdvo_version_major;
+	u8 sdvo_version_minor;
+	unsigned int sdvo_inputs_mask:2;
+	unsigned int smooth_scaling:1;
+	unsigned int sharp_scaling:1;
+	unsigned int up_scaling:1;
+	unsigned int down_scaling:1;
+	unsigned int stall_support:1;
+	unsigned int pad:1;
+	u16 output_flags;
+} __attribute__((packed));
+
+/* Note: SDVO detailed timing flags match EDID misc flags. */
+#define DTD_FLAG_HSYNC_POSITIVE (1 << 1)
+#define DTD_FLAG_VSYNC_POSITIVE (1 << 2)
+#define DTD_FLAG_INTERLACE	(1 << 7)
+
+/** This matches the EDID DTD structure, more or less */
+struct intel_sdvo_dtd {
+	struct {
+		u16 clock;	/**< pixel clock, in 10kHz units */
+		u8 h_active;	/**< lower 8 bits (pixels) */
+		u8 h_blank;	/**< lower 8 bits (pixels) */
+		u8 h_high;	/**< upper 4 bits each h_active, h_blank */
+		u8 v_active;	/**< lower 8 bits (lines) */
+		u8 v_blank;	/**< lower 8 bits (lines) */
+		u8 v_high;	/**< upper 4 bits each v_active, v_blank */
+	} part1;
+
+	struct {
+		u8 h_sync_off;	/**< lower 8 bits, from hblank start */
+		u8 h_sync_width;	/**< lower 8 bits (pixels) */
+		/** lower 4 bits each vsync offset, vsync width */
+		u8 v_sync_off_width;
+		/**
+		* 2 high bits of hsync offset, 2 high bits of hsync width,
+		* bits 4-5 of vsync offset, and 2 high bits of vsync width.
+		*/
+		u8 sync_off_width_high;
+		u8 dtd_flags;
+		u8 sdvo_flags;
+		/** bits 6-7 of vsync offset at bits 6-7 */
+		u8 v_sync_off_high;
+		u8 reserved;
+	} part2;
+} __attribute__((packed));
+
+struct intel_sdvo_pixel_clock_range {
+	u16 min;	/**< pixel clock, in 10kHz units */
+	u16 max;	/**< pixel clock, in 10kHz units */
+} __attribute__((packed));
+
+struct intel_sdvo_preferred_input_timing_args {
+	u16 clock;
+	u16 width;
+	u16 height;
+	u8	interlace:1;
+	u8	scaled:1;
+	u8	pad:6;
+} __attribute__((packed));
+
+/* I2C registers for SDVO */
+#define SDVO_I2C_ARG_0				0x07
+#define SDVO_I2C_ARG_1				0x06
+#define SDVO_I2C_ARG_2				0x05
+#define SDVO_I2C_ARG_3				0x04
+#define SDVO_I2C_ARG_4				0x03
+#define SDVO_I2C_ARG_5				0x02
+#define SDVO_I2C_ARG_6				0x01
+#define SDVO_I2C_ARG_7				0x00
+#define SDVO_I2C_OPCODE				0x08
+#define SDVO_I2C_CMD_STATUS			0x09
+#define SDVO_I2C_RETURN_0			0x0a
+#define SDVO_I2C_RETURN_1			0x0b
+#define SDVO_I2C_RETURN_2			0x0c
+#define SDVO_I2C_RETURN_3			0x0d
+#define SDVO_I2C_RETURN_4			0x0e
+#define SDVO_I2C_RETURN_5			0x0f
+#define SDVO_I2C_RETURN_6			0x10
+#define SDVO_I2C_RETURN_7			0x11
+#define SDVO_I2C_VENDOR_BEGIN			0x20
+
+/* Status results */
+#define SDVO_CMD_STATUS_POWER_ON		0x0
+#define SDVO_CMD_STATUS_SUCCESS			0x1
+#define SDVO_CMD_STATUS_NOTSUPP			0x2
+#define SDVO_CMD_STATUS_INVALID_ARG		0x3
+#define SDVO_CMD_STATUS_PENDING			0x4
+#define SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED	0x5
+#define SDVO_CMD_STATUS_SCALING_NOT_SUPP	0x6
+
+/* SDVO commands, argument/result registers */
+
+#define SDVO_CMD_RESET					0x01
+
+/** Returns a struct intel_sdvo_caps */
+#define SDVO_CMD_GET_DEVICE_CAPS			0x02
+
+#define SDVO_CMD_GET_FIRMWARE_REV			0x86
+# define SDVO_DEVICE_FIRMWARE_MINOR			SDVO_I2C_RETURN_0
+# define SDVO_DEVICE_FIRMWARE_MAJOR			SDVO_I2C_RETURN_1
+# define SDVO_DEVICE_FIRMWARE_PATCH			SDVO_I2C_RETURN_2
+
+/**
+ * Reports which inputs are trained (managed to sync).
+ *
+ * Devices must have trained within 2 vsyncs of a mode change.
+ */
+#define SDVO_CMD_GET_TRAINED_INPUTS			0x03
+struct intel_sdvo_get_trained_inputs_response {
+	unsigned int input0_trained:1;
+	unsigned int input1_trained:1;
+	unsigned int pad:6;
+} __attribute__((packed));
+
+/** Returns a struct intel_sdvo_output_flags of active outputs. */
+#define SDVO_CMD_GET_ACTIVE_OUTPUTS			0x04
+
+/**
+ * Sets the current set of active outputs.
+ *
+ * Takes a struct intel_sdvo_output_flags.  Must be preceded by a SET_IN_OUT_MAP
+ * on multi-output devices.
+ */
+#define SDVO_CMD_SET_ACTIVE_OUTPUTS			0x05
+
+/**
+ * Returns the current mapping of SDVO inputs to outputs on the device.
+ *
+ * Returns two struct intel_sdvo_output_flags structures.
+ */
+#define SDVO_CMD_GET_IN_OUT_MAP				0x06
+struct intel_sdvo_in_out_map {
+	u16 in0, in1;
+};
+
+/**
+ * Sets the current mapping of SDVO inputs to outputs on the device.
+ *
+ * Takes two struct i380_sdvo_output_flags structures.
+ */
+#define SDVO_CMD_SET_IN_OUT_MAP				0x07
+
+/**
+ * Returns a struct intel_sdvo_output_flags of attached displays.
+ */
+#define SDVO_CMD_GET_ATTACHED_DISPLAYS			0x0b
+
+/**
+ * Returns a struct intel_sdvo_ouptut_flags of displays supporting hot plugging.
+ */
+#define SDVO_CMD_GET_HOT_PLUG_SUPPORT			0x0c
+
+/**
+ * Takes a struct intel_sdvo_output_flags.
+ */
+#define SDVO_CMD_SET_ACTIVE_HOT_PLUG			0x0d
+
+/**
+ * Returns a struct intel_sdvo_output_flags of displays with hot plug
+ * interrupts enabled.
+ */
+#define SDVO_CMD_GET_ACTIVE_HOT_PLUG			0x0e
+
+#define SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE		0x0f
+struct intel_sdvo_get_interrupt_event_source_response {
+	u16 interrupt_status;
+	unsigned int ambient_light_interrupt:1;
+	unsigned int hdmi_audio_encrypt_change:1;
+	unsigned int pad:6;
+} __attribute__((packed));
+
+/**
+ * Selects which input is affected by future input commands.
+ *
+ * Commands affected include SET_INPUT_TIMINGS_PART[12],
+ * GET_INPUT_TIMINGS_PART[12], GET_PREFERRED_INPUT_TIMINGS_PART[12],
+ * GET_INPUT_PIXEL_CLOCK_RANGE, and CREATE_PREFERRED_INPUT_TIMINGS.
+ */
+#define SDVO_CMD_SET_TARGET_INPUT			0x10
+struct intel_sdvo_set_target_input_args {
+	unsigned int target_1:1;
+	unsigned int pad:7;
+} __attribute__((packed));
+
+/**
+ * Takes a struct intel_sdvo_output_flags of which outputs are targeted by
+ * future output commands.
+ *
+ * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12],
+ * GET_OUTPUT_TIMINGS_PART[12], and GET_OUTPUT_PIXEL_CLOCK_RANGE.
+ */
+#define SDVO_CMD_SET_TARGET_OUTPUT			0x11
+
+#define SDVO_CMD_GET_INPUT_TIMINGS_PART1		0x12
+#define SDVO_CMD_GET_INPUT_TIMINGS_PART2		0x13
+#define SDVO_CMD_SET_INPUT_TIMINGS_PART1		0x14
+#define SDVO_CMD_SET_INPUT_TIMINGS_PART2		0x15
+#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART1		0x16
+#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART2		0x17
+#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART1		0x18
+#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART2		0x19
+/* Part 1 */
+# define SDVO_DTD_CLOCK_LOW				SDVO_I2C_ARG_0
+# define SDVO_DTD_CLOCK_HIGH				SDVO_I2C_ARG_1
+# define SDVO_DTD_H_ACTIVE				SDVO_I2C_ARG_2
+# define SDVO_DTD_H_BLANK				SDVO_I2C_ARG_3
+# define SDVO_DTD_H_HIGH				SDVO_I2C_ARG_4
+# define SDVO_DTD_V_ACTIVE				SDVO_I2C_ARG_5
+# define SDVO_DTD_V_BLANK				SDVO_I2C_ARG_6
+# define SDVO_DTD_V_HIGH				SDVO_I2C_ARG_7
+/* Part 2 */
+# define SDVO_DTD_HSYNC_OFF				SDVO_I2C_ARG_0
+# define SDVO_DTD_HSYNC_WIDTH				SDVO_I2C_ARG_1
+# define SDVO_DTD_VSYNC_OFF_WIDTH			SDVO_I2C_ARG_2
+# define SDVO_DTD_SYNC_OFF_WIDTH_HIGH			SDVO_I2C_ARG_3
+# define SDVO_DTD_DTD_FLAGS				SDVO_I2C_ARG_4
+# define SDVO_DTD_DTD_FLAG_INTERLACED				(1 << 7)
+# define SDVO_DTD_DTD_FLAG_STEREO_MASK				(3 << 5)
+# define SDVO_DTD_DTD_FLAG_INPUT_MASK				(3 << 3)
+# define SDVO_DTD_DTD_FLAG_SYNC_MASK				(3 << 1)
+# define SDVO_DTD_SDVO_FLAS				SDVO_I2C_ARG_5
+# define SDVO_DTD_SDVO_FLAG_STALL				(1 << 7)
+# define SDVO_DTD_SDVO_FLAG_CENTERED				(0 << 6)
+# define SDVO_DTD_SDVO_FLAG_UPPER_LEFT				(1 << 6)
+# define SDVO_DTD_SDVO_FLAG_SCALING_MASK			(3 << 4)
+# define SDVO_DTD_SDVO_FLAG_SCALING_NONE			(0 << 4)
+# define SDVO_DTD_SDVO_FLAG_SCALING_SHARP			(1 << 4)
+# define SDVO_DTD_SDVO_FLAG_SCALING_SMOOTH			(2 << 4)
+# define SDVO_DTD_VSYNC_OFF_HIGH			SDVO_I2C_ARG_6
+
+/**
+ * Generates a DTD based on the given width, height, and flags.
+ *
+ * This will be supported by any device supporting scaling or interlaced
+ * modes.
+ */
+#define SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING		0x1a
+# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_LOW		SDVO_I2C_ARG_0
+# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_HIGH		SDVO_I2C_ARG_1
+# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_LOW		SDVO_I2C_ARG_2
+# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_HIGH		SDVO_I2C_ARG_3
+# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_LOW		SDVO_I2C_ARG_4
+# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_HIGH	SDVO_I2C_ARG_5
+# define SDVO_PREFERRED_INPUT_TIMING_FLAGS		SDVO_I2C_ARG_6
+# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_INTERLACED		(1 << 0)
+# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_SCALED		(1 << 1)
+
+#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1	0x1b
+#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2	0x1c
+
+/** Returns a struct intel_sdvo_pixel_clock_range */
+#define SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE		0x1d
+/** Returns a struct intel_sdvo_pixel_clock_range */
+#define SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE		0x1e
+
+/** Returns a byte bitfield containing SDVO_CLOCK_RATE_MULT_* flags */
+#define SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS		0x1f
+
+/** Returns a byte containing a SDVO_CLOCK_RATE_MULT_* flag */
+#define SDVO_CMD_GET_CLOCK_RATE_MULT			0x20
+/** Takes a byte containing a SDVO_CLOCK_RATE_MULT_* flag */
+#define SDVO_CMD_SET_CLOCK_RATE_MULT			0x21
+# define SDVO_CLOCK_RATE_MULT_1X				(1 << 0)
+# define SDVO_CLOCK_RATE_MULT_2X				(1 << 1)
+# define SDVO_CLOCK_RATE_MULT_4X				(1 << 3)
+
+#define SDVO_CMD_GET_SUPPORTED_TV_FORMATS		0x27
+/** 6 bytes of bit flags for TV formats shared by all TV format functions */
+struct intel_sdvo_tv_format {
+	unsigned int ntsc_m:1;
+	unsigned int ntsc_j:1;
+	unsigned int ntsc_443:1;
+	unsigned int pal_b:1;
+	unsigned int pal_d:1;
+	unsigned int pal_g:1;
+	unsigned int pal_h:1;
+	unsigned int pal_i:1;
+
+	unsigned int pal_m:1;
+	unsigned int pal_n:1;
+	unsigned int pal_nc:1;
+	unsigned int pal_60:1;
+	unsigned int secam_b:1;
+	unsigned int secam_d:1;
+	unsigned int secam_g:1;
+	unsigned int secam_k:1;
+
+	unsigned int secam_k1:1;
+	unsigned int secam_l:1;
+	unsigned int secam_60:1;
+	unsigned int hdtv_std_smpte_240m_1080i_59:1;
+	unsigned int hdtv_std_smpte_240m_1080i_60:1;
+	unsigned int hdtv_std_smpte_260m_1080i_59:1;
+	unsigned int hdtv_std_smpte_260m_1080i_60:1;
+	unsigned int hdtv_std_smpte_274m_1080i_50:1;
+
+	unsigned int hdtv_std_smpte_274m_1080i_59:1;
+	unsigned int hdtv_std_smpte_274m_1080i_60:1;
+	unsigned int hdtv_std_smpte_274m_1080p_23:1;
+	unsigned int hdtv_std_smpte_274m_1080p_24:1;
+	unsigned int hdtv_std_smpte_274m_1080p_25:1;
+	unsigned int hdtv_std_smpte_274m_1080p_29:1;
+	unsigned int hdtv_std_smpte_274m_1080p_30:1;
+	unsigned int hdtv_std_smpte_274m_1080p_50:1;
+
+	unsigned int hdtv_std_smpte_274m_1080p_59:1;
+	unsigned int hdtv_std_smpte_274m_1080p_60:1;
+	unsigned int hdtv_std_smpte_295m_1080i_50:1;
+	unsigned int hdtv_std_smpte_295m_1080p_50:1;
+	unsigned int hdtv_std_smpte_296m_720p_59:1;
+	unsigned int hdtv_std_smpte_296m_720p_60:1;
+	unsigned int hdtv_std_smpte_296m_720p_50:1;
+	unsigned int hdtv_std_smpte_293m_480p_59:1;
+
+	unsigned int hdtv_std_smpte_170m_480i_59:1;
+	unsigned int hdtv_std_iturbt601_576i_50:1;
+	unsigned int hdtv_std_iturbt601_576p_50:1;
+	unsigned int hdtv_std_eia_7702a_480i_60:1;
+	unsigned int hdtv_std_eia_7702a_480p_60:1;
+	unsigned int pad:3;
+} __attribute__((packed));
+
+#define SDVO_CMD_GET_TV_FORMAT				0x28
+
+#define SDVO_CMD_SET_TV_FORMAT				0x29
+
+/** Returns the resolutiosn that can be used with the given TV format */
+#define SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT		0x83
+struct intel_sdvo_sdtv_resolution_request {
+	unsigned int ntsc_m:1;
+	unsigned int ntsc_j:1;
+	unsigned int ntsc_443:1;
+	unsigned int pal_b:1;
+	unsigned int pal_d:1;
+	unsigned int pal_g:1;
+	unsigned int pal_h:1;
+	unsigned int pal_i:1;
+
+	unsigned int pal_m:1;
+	unsigned int pal_n:1;
+	unsigned int pal_nc:1;
+	unsigned int pal_60:1;
+	unsigned int secam_b:1;
+	unsigned int secam_d:1;
+	unsigned int secam_g:1;
+	unsigned int secam_k:1;
+
+	unsigned int secam_k1:1;
+	unsigned int secam_l:1;
+	unsigned int secam_60:1;
+	unsigned int pad:5;
+} __attribute__((packed));
+
+struct intel_sdvo_sdtv_resolution_reply {
+	unsigned int res_320x200:1;
+	unsigned int res_320x240:1;
+	unsigned int res_400x300:1;
+	unsigned int res_640x350:1;
+	unsigned int res_640x400:1;
+	unsigned int res_640x480:1;
+	unsigned int res_704x480:1;
+	unsigned int res_704x576:1;
+
+	unsigned int res_720x350:1;
+	unsigned int res_720x400:1;
+	unsigned int res_720x480:1;
+	unsigned int res_720x540:1;
+	unsigned int res_720x576:1;
+	unsigned int res_768x576:1;
+	unsigned int res_800x600:1;
+	unsigned int res_832x624:1;
+
+	unsigned int res_920x766:1;
+	unsigned int res_1024x768:1;
+	unsigned int res_1280x1024:1;
+	unsigned int pad:5;
+} __attribute__((packed));
+
+/* Get supported resolution with squire pixel aspect ratio that can be
+   scaled for the requested HDTV format */
+#define SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT		0x85
+
+struct intel_sdvo_hdtv_resolution_request {
+	unsigned int hdtv_std_smpte_240m_1080i_59:1;
+	unsigned int hdtv_std_smpte_240m_1080i_60:1;
+	unsigned int hdtv_std_smpte_260m_1080i_59:1;
+	unsigned int hdtv_std_smpte_260m_1080i_60:1;
+	unsigned int hdtv_std_smpte_274m_1080i_50:1;
+	unsigned int hdtv_std_smpte_274m_1080i_59:1;
+	unsigned int hdtv_std_smpte_274m_1080i_60:1;
+	unsigned int hdtv_std_smpte_274m_1080p_23:1;
+
+	unsigned int hdtv_std_smpte_274m_1080p_24:1;
+	unsigned int hdtv_std_smpte_274m_1080p_25:1;
+	unsigned int hdtv_std_smpte_274m_1080p_29:1;
+	unsigned int hdtv_std_smpte_274m_1080p_30:1;
+	unsigned int hdtv_std_smpte_274m_1080p_50:1;
+	unsigned int hdtv_std_smpte_274m_1080p_59:1;
+	unsigned int hdtv_std_smpte_274m_1080p_60:1;
+	unsigned int hdtv_std_smpte_295m_1080i_50:1;
+
+	unsigned int hdtv_std_smpte_295m_1080p_50:1;
+	unsigned int hdtv_std_smpte_296m_720p_59:1;
+	unsigned int hdtv_std_smpte_296m_720p_60:1;
+	unsigned int hdtv_std_smpte_296m_720p_50:1;
+	unsigned int hdtv_std_smpte_293m_480p_59:1;
+	unsigned int hdtv_std_smpte_170m_480i_59:1;
+	unsigned int hdtv_std_iturbt601_576i_50:1;
+	unsigned int hdtv_std_iturbt601_576p_50:1;
+
+	unsigned int hdtv_std_eia_7702a_480i_60:1;
+	unsigned int hdtv_std_eia_7702a_480p_60:1;
+	unsigned int pad:6;
+} __attribute__((packed));
+
+struct intel_sdvo_hdtv_resolution_reply {
+	unsigned int res_640x480:1;
+	unsigned int res_800x600:1;
+	unsigned int res_1024x768:1;
+	unsigned int res_1280x960:1;
+	unsigned int res_1400x1050:1;
+	unsigned int res_1600x1200:1;
+	unsigned int res_1920x1440:1;
+	unsigned int res_2048x1536:1;
+
+	unsigned int res_2560x1920:1;
+	unsigned int res_3200x2400:1;
+	unsigned int res_3840x2880:1;
+	unsigned int pad1:5;
+
+	unsigned int res_848x480:1;
+	unsigned int res_1064x600:1;
+	unsigned int res_1280x720:1;
+	unsigned int res_1360x768:1;
+	unsigned int res_1704x960:1;
+	unsigned int res_1864x1050:1;
+	unsigned int res_1920x1080:1;
+	unsigned int res_2128x1200:1;
+
+	unsigned int res_2560x1400:1;
+	unsigned int res_2728x1536:1;
+	unsigned int res_3408x1920:1;
+	unsigned int res_4264x2400:1;
+	unsigned int res_5120x2880:1;
+	unsigned int pad2:3;
+
+	unsigned int res_768x480:1;
+	unsigned int res_960x600:1;
+	unsigned int res_1152x720:1;
+	unsigned int res_1124x768:1;
+	unsigned int res_1536x960:1;
+	unsigned int res_1680x1050:1;
+	unsigned int res_1728x1080:1;
+	unsigned int res_1920x1200:1;
+
+	unsigned int res_2304x1440:1;
+	unsigned int res_2456x1536:1;
+	unsigned int res_3072x1920:1;
+	unsigned int res_3840x2400:1;
+	unsigned int res_4608x2880:1;
+	unsigned int pad3:3;
+
+	unsigned int res_1280x1024:1;
+	unsigned int pad4:7;
+
+	unsigned int res_1280x768:1;
+	unsigned int pad5:7;
+} __attribute__((packed));
+
+/* Get supported power state returns info for encoder and monitor, rely on
+   last SetTargetInput and SetTargetOutput calls */
+#define SDVO_CMD_GET_SUPPORTED_POWER_STATES		0x2a
+/* Get power state returns info for encoder and monitor, rely on last
+   SetTargetInput and SetTargetOutput calls */
+#define SDVO_CMD_GET_POWER_STATE			0x2b
+#define SDVO_CMD_GET_ENCODER_POWER_STATE		0x2b
+#define SDVO_CMD_SET_ENCODER_POWER_STATE		0x2c
+# define SDVO_ENCODER_STATE_ON					(1 << 0)
+# define SDVO_ENCODER_STATE_STANDBY				(1 << 1)
+# define SDVO_ENCODER_STATE_SUSPEND				(1 << 2)
+# define SDVO_ENCODER_STATE_OFF					(1 << 3)
+# define SDVO_MONITOR_STATE_ON					(1 << 4)
+# define SDVO_MONITOR_STATE_STANDBY				(1 << 5)
+# define SDVO_MONITOR_STATE_SUSPEND				(1 << 6)
+# define SDVO_MONITOR_STATE_OFF					(1 << 7)
+
+#define SDVO_CMD_GET_MAX_PANEL_POWER_SEQUENCING		0x2d
+#define SDVO_CMD_GET_PANEL_POWER_SEQUENCING		0x2e
+#define SDVO_CMD_SET_PANEL_POWER_SEQUENCING		0x2f
+/**
+ * The panel power sequencing parameters are in units of milliseconds.
+ * The high fields are bits 8:9 of the 10-bit values.
+ */
+struct sdvo_panel_power_sequencing {
+	u8 t0;
+	u8 t1;
+	u8 t2;
+	u8 t3;
+	u8 t4;
+
+	unsigned int t0_high:2;
+	unsigned int t1_high:2;
+	unsigned int t2_high:2;
+	unsigned int t3_high:2;
+
+	unsigned int t4_high:2;
+	unsigned int pad:6;
+} __attribute__((packed));
+
+#define SDVO_CMD_GET_MAX_BACKLIGHT_LEVEL		0x30
+struct sdvo_max_backlight_reply {
+	u8 max_value;
+	u8 default_value;
+} __attribute__((packed));
+
+#define SDVO_CMD_GET_BACKLIGHT_LEVEL			0x31
+#define SDVO_CMD_SET_BACKLIGHT_LEVEL			0x32
+
+#define SDVO_CMD_GET_AMBIENT_LIGHT			0x33
+struct sdvo_get_ambient_light_reply {
+	u16 trip_low;
+	u16 trip_high;
+	u16 value;
+} __attribute__((packed));
+#define SDVO_CMD_SET_AMBIENT_LIGHT			0x34
+struct sdvo_set_ambient_light_reply {
+	u16 trip_low;
+	u16 trip_high;
+	unsigned int enable:1;
+	unsigned int pad:7;
+} __attribute__((packed));
+
+/* Set display power state */
+#define SDVO_CMD_SET_DISPLAY_POWER_STATE		0x7d
+# define SDVO_DISPLAY_STATE_ON				(1 << 0)
+# define SDVO_DISPLAY_STATE_STANDBY			(1 << 1)
+# define SDVO_DISPLAY_STATE_SUSPEND			(1 << 2)
+# define SDVO_DISPLAY_STATE_OFF				(1 << 3)
+
+#define SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS		0x84
+struct intel_sdvo_enhancements_reply {
+	unsigned int flicker_filter:1;
+	unsigned int flicker_filter_adaptive:1;
+	unsigned int flicker_filter_2d:1;
+	unsigned int saturation:1;
+	unsigned int hue:1;
+	unsigned int brightness:1;
+	unsigned int contrast:1;
+	unsigned int overscan_h:1;
+
+	unsigned int overscan_v:1;
+	unsigned int hpos:1;
+	unsigned int vpos:1;
+	unsigned int sharpness:1;
+	unsigned int dot_crawl:1;
+	unsigned int dither:1;
+	unsigned int tv_chroma_filter:1;
+	unsigned int tv_luma_filter:1;
+} __attribute__((packed));
+
+/* Picture enhancement limits below are dependent on the current TV format,
+ * and thus need to be queried and set after it.
+ */
+#define SDVO_CMD_GET_MAX_FLICKER_FILTER			0x4d
+#define SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE	0x7b
+#define SDVO_CMD_GET_MAX_FLICKER_FILTER_2D		0x52
+#define SDVO_CMD_GET_MAX_SATURATION			0x55
+#define SDVO_CMD_GET_MAX_HUE				0x58
+#define SDVO_CMD_GET_MAX_BRIGHTNESS			0x5b
+#define SDVO_CMD_GET_MAX_CONTRAST			0x5e
+#define SDVO_CMD_GET_MAX_OVERSCAN_H			0x61
+#define SDVO_CMD_GET_MAX_OVERSCAN_V			0x64
+#define SDVO_CMD_GET_MAX_HPOS				0x67
+#define SDVO_CMD_GET_MAX_VPOS				0x6a
+#define SDVO_CMD_GET_MAX_SHARPNESS			0x6d
+#define SDVO_CMD_GET_MAX_TV_CHROMA_FILTER		0x74
+#define SDVO_CMD_GET_MAX_TV_LUMA_FILTER			0x77
+struct intel_sdvo_enhancement_limits_reply {
+	u16 max_value;
+	u16 default_value;
+} __attribute__((packed));
+
+#define SDVO_CMD_GET_LVDS_PANEL_INFORMATION		0x7f
+#define SDVO_CMD_SET_LVDS_PANEL_INFORMATION		0x80
+# define SDVO_LVDS_COLOR_DEPTH_18			(0 << 0)
+# define SDVO_LVDS_COLOR_DEPTH_24			(1 << 0)
+# define SDVO_LVDS_CONNECTOR_SPWG			(0 << 2)
+# define SDVO_LVDS_CONNECTOR_OPENLDI			(1 << 2)
+# define SDVO_LVDS_SINGLE_CHANNEL			(0 << 4)
+# define SDVO_LVDS_DUAL_CHANNEL				(1 << 4)
+
+#define SDVO_CMD_GET_FLICKER_FILTER			0x4e
+#define SDVO_CMD_SET_FLICKER_FILTER			0x4f
+#define SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE		0x50
+#define SDVO_CMD_SET_FLICKER_FILTER_ADAPTIVE		0x51
+#define SDVO_CMD_GET_FLICKER_FILTER_2D			0x53
+#define SDVO_CMD_SET_FLICKER_FILTER_2D			0x54
+#define SDVO_CMD_GET_SATURATION				0x56
+#define SDVO_CMD_SET_SATURATION				0x57
+#define SDVO_CMD_GET_HUE				0x59
+#define SDVO_CMD_SET_HUE				0x5a
+#define SDVO_CMD_GET_BRIGHTNESS				0x5c
+#define SDVO_CMD_SET_BRIGHTNESS				0x5d
+#define SDVO_CMD_GET_CONTRAST				0x5f
+#define SDVO_CMD_SET_CONTRAST				0x60
+#define SDVO_CMD_GET_OVERSCAN_H				0x62
+#define SDVO_CMD_SET_OVERSCAN_H				0x63
+#define SDVO_CMD_GET_OVERSCAN_V				0x65
+#define SDVO_CMD_SET_OVERSCAN_V				0x66
+#define SDVO_CMD_GET_HPOS				0x68
+#define SDVO_CMD_SET_HPOS				0x69
+#define SDVO_CMD_GET_VPOS				0x6b
+#define SDVO_CMD_SET_VPOS				0x6c
+#define SDVO_CMD_GET_SHARPNESS				0x6e
+#define SDVO_CMD_SET_SHARPNESS				0x6f
+#define SDVO_CMD_GET_TV_CHROMA_FILTER			0x75
+#define SDVO_CMD_SET_TV_CHROMA_FILTER			0x76
+#define SDVO_CMD_GET_TV_LUMA_FILTER			0x78
+#define SDVO_CMD_SET_TV_LUMA_FILTER			0x79
+struct intel_sdvo_enhancements_arg {
+	u16 value;
+} __attribute__((packed));
+
+#define SDVO_CMD_GET_DOT_CRAWL				0x70
+#define SDVO_CMD_SET_DOT_CRAWL				0x71
+# define SDVO_DOT_CRAWL_ON					(1 << 0)
+# define SDVO_DOT_CRAWL_DEFAULT_ON				(1 << 1)
+
+#define SDVO_CMD_GET_DITHER				0x72
+#define SDVO_CMD_SET_DITHER				0x73
+# define SDVO_DITHER_ON						(1 << 0)
+# define SDVO_DITHER_DEFAULT_ON					(1 << 1)
+
+#define SDVO_CMD_SET_CONTROL_BUS_SWITCH			0x7a
+# define SDVO_CONTROL_BUS_PROM				(1 << 0)
+# define SDVO_CONTROL_BUS_DDC1				(1 << 1)
+# define SDVO_CONTROL_BUS_DDC2				(1 << 2)
+# define SDVO_CONTROL_BUS_DDC3				(1 << 3)
+
+/* HDMI op codes */
+#define SDVO_CMD_GET_SUPP_ENCODE	0x9d
+#define SDVO_CMD_GET_ENCODE		0x9e
+#define SDVO_CMD_SET_ENCODE		0x9f
+  #define SDVO_ENCODE_DVI	0x0
+  #define SDVO_ENCODE_HDMI	0x1
+#define SDVO_CMD_SET_PIXEL_REPLI	0x8b
+#define SDVO_CMD_GET_PIXEL_REPLI	0x8c
+#define SDVO_CMD_GET_COLORIMETRY_CAP	0x8d
+#define SDVO_CMD_SET_COLORIMETRY	0x8e
+  #define SDVO_COLORIMETRY_RGB256   0x0
+  #define SDVO_COLORIMETRY_RGB220   0x1
+  #define SDVO_COLORIMETRY_YCrCb422 0x3
+  #define SDVO_COLORIMETRY_YCrCb444 0x4
+#define SDVO_CMD_GET_COLORIMETRY	0x8f
+#define SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER 0x90
+#define SDVO_CMD_SET_AUDIO_STAT		0x91
+#define SDVO_CMD_GET_AUDIO_STAT		0x92
+#define SDVO_CMD_SET_HBUF_INDEX		0x93
+#define SDVO_CMD_GET_HBUF_INDEX		0x94
+#define SDVO_CMD_GET_HBUF_INFO		0x95
+#define SDVO_CMD_SET_HBUF_AV_SPLIT	0x96
+#define SDVO_CMD_GET_HBUF_AV_SPLIT	0x97
+#define SDVO_CMD_SET_HBUF_DATA		0x98
+#define SDVO_CMD_GET_HBUF_DATA		0x99
+#define SDVO_CMD_SET_HBUF_TXRATE	0x9a
+#define SDVO_CMD_GET_HBUF_TXRATE	0x9b
+  #define SDVO_HBUF_TX_DISABLED	(0 << 6)
+  #define SDVO_HBUF_TX_ONCE	(2 << 6)
+  #define SDVO_HBUF_TX_VSYNC	(3 << 6)
+#define SDVO_CMD_GET_AUDIO_TX_INFO	0x9c
+#define SDVO_NEED_TO_STALL  (1 << 7)
+
+struct intel_sdvo_encode {
+	u8 dvi_rev;
+	u8 hdmi_rev;
+} __attribute__ ((packed));
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
new file mode 100644
index 00000000..e90dfb62
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -0,0 +1,666 @@
+/*
+ * Copyright © 2011 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Authors:
+ *   Jesse Barnes <jbarnes@virtuousgeek.org>
+ *
+ * New plane/sprite handling.
+ *
+ * The older chips had a separate interface for programming plane related
+ * registers; newer ones are much simpler and we can use the new DRM plane
+ * support.
+ */
+#include "drmP.h"
+#include "drm_crtc.h"
+#include "drm_fourcc.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+static void
+ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb,
+		 struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
+		 unsigned int crtc_w, unsigned int crtc_h,
+		 uint32_t x, uint32_t y,
+		 uint32_t src_w, uint32_t src_h)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	int pipe = intel_plane->pipe;
+	u32 sprctl, sprscale = 0;
+	int pixel_size;
+
+	sprctl = I915_READ(SPRCTL(pipe));
+
+	/* Mask out pixel format bits in case we change it */
+	sprctl &= ~SPRITE_PIXFORMAT_MASK;
+	sprctl &= ~SPRITE_RGB_ORDER_RGBX;
+	sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
+
+	switch (fb->pixel_format) {
+	case DRM_FORMAT_XBGR8888:
+		sprctl |= SPRITE_FORMAT_RGBX888;
+		pixel_size = 4;
+		break;
+	case DRM_FORMAT_XRGB8888:
+		sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX;
+		pixel_size = 4;
+		break;
+	case DRM_FORMAT_YUYV:
+		sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YUYV;
+		pixel_size = 2;
+		break;
+	case DRM_FORMAT_YVYU:
+		sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YVYU;
+		pixel_size = 2;
+		break;
+	case DRM_FORMAT_UYVY:
+		sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_UYVY;
+		pixel_size = 2;
+		break;
+	case DRM_FORMAT_VYUY:
+		sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_VYUY;
+		pixel_size = 2;
+		break;
+	default:
+		DRM_DEBUG_DRIVER("bad pixel format, assuming RGBX888\n");
+		sprctl |= DVS_FORMAT_RGBX888;
+		pixel_size = 4;
+		break;
+	}
+
+	if (obj->tiling_mode != I915_TILING_NONE)
+		sprctl |= SPRITE_TILED;
+
+	/* must disable */
+	sprctl |= SPRITE_TRICKLE_FEED_DISABLE;
+	sprctl |= SPRITE_ENABLE;
+
+	/* Sizes are 0 based */
+	src_w--;
+	src_h--;
+	crtc_w--;
+	crtc_h--;
+
+	intel_update_sprite_watermarks(dev, pipe, crtc_w, pixel_size);
+
+	/*
+	 * IVB workaround: must disable low power watermarks for at least
+	 * one frame before enabling scaling.  LP watermarks can be re-enabled
+	 * when scaling is disabled.
+	 */
+	if (crtc_w != src_w || crtc_h != src_h) {
+		dev_priv->sprite_scaling_enabled = true;
+		sandybridge_update_wm(dev);
+		intel_wait_for_vblank(dev, pipe);
+		sprscale = SPRITE_SCALE_ENABLE | (src_w << 16) | src_h;
+	} else {
+		dev_priv->sprite_scaling_enabled = false;
+		/* potentially re-enable LP watermarks */
+		sandybridge_update_wm(dev);
+	}
+
+	I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
+	I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
+	if (obj->tiling_mode != I915_TILING_NONE) {
+		I915_WRITE(SPRTILEOFF(pipe), (y << 16) | x);
+	} else {
+		unsigned long offset;
+
+		offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
+		I915_WRITE(SPRLINOFF(pipe), offset);
+	}
+	I915_WRITE(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
+	I915_WRITE(SPRSCALE(pipe), sprscale);
+	I915_WRITE(SPRCTL(pipe), sprctl);
+	I915_WRITE(SPRSURF(pipe), obj->gtt_offset);
+	POSTING_READ(SPRSURF(pipe));
+}
+
+static void
+ivb_disable_plane(struct drm_plane *plane)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	int pipe = intel_plane->pipe;
+
+	I915_WRITE(SPRCTL(pipe), I915_READ(SPRCTL(pipe)) & ~SPRITE_ENABLE);
+	/* Can't leave the scaler enabled... */
+	I915_WRITE(SPRSCALE(pipe), 0);
+	/* Activate double buffered register update */
+	I915_WRITE(SPRSURF(pipe), 0);
+	POSTING_READ(SPRSURF(pipe));
+}
+
+static int
+ivb_update_colorkey(struct drm_plane *plane,
+		    struct drm_intel_sprite_colorkey *key)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane;
+	u32 sprctl;
+	int ret = 0;
+
+	intel_plane = to_intel_plane(plane);
+
+	I915_WRITE(SPRKEYVAL(intel_plane->pipe), key->min_value);
+	I915_WRITE(SPRKEYMAX(intel_plane->pipe), key->max_value);
+	I915_WRITE(SPRKEYMSK(intel_plane->pipe), key->channel_mask);
+
+	sprctl = I915_READ(SPRCTL(intel_plane->pipe));
+	sprctl &= ~(SPRITE_SOURCE_KEY | SPRITE_DEST_KEY);
+	if (key->flags & I915_SET_COLORKEY_DESTINATION)
+		sprctl |= SPRITE_DEST_KEY;
+	else if (key->flags & I915_SET_COLORKEY_SOURCE)
+		sprctl |= SPRITE_SOURCE_KEY;
+	I915_WRITE(SPRCTL(intel_plane->pipe), sprctl);
+
+	POSTING_READ(SPRKEYMSK(intel_plane->pipe));
+
+	return ret;
+}
+
+static void
+ivb_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane;
+	u32 sprctl;
+
+	intel_plane = to_intel_plane(plane);
+
+	key->min_value = I915_READ(SPRKEYVAL(intel_plane->pipe));
+	key->max_value = I915_READ(SPRKEYMAX(intel_plane->pipe));
+	key->channel_mask = I915_READ(SPRKEYMSK(intel_plane->pipe));
+	key->flags = 0;
+
+	sprctl = I915_READ(SPRCTL(intel_plane->pipe));
+
+	if (sprctl & SPRITE_DEST_KEY)
+		key->flags = I915_SET_COLORKEY_DESTINATION;
+	else if (sprctl & SPRITE_SOURCE_KEY)
+		key->flags = I915_SET_COLORKEY_SOURCE;
+	else
+		key->flags = I915_SET_COLORKEY_NONE;
+}
+
+static void
+snb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb,
+		 struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
+		 unsigned int crtc_w, unsigned int crtc_h,
+		 uint32_t x, uint32_t y,
+		 uint32_t src_w, uint32_t src_h)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	int pipe = intel_plane->pipe, pixel_size;
+	u32 dvscntr, dvsscale = 0;
+
+	dvscntr = I915_READ(DVSCNTR(pipe));
+
+	/* Mask out pixel format bits in case we change it */
+	dvscntr &= ~DVS_PIXFORMAT_MASK;
+	dvscntr &= ~DVS_RGB_ORDER_XBGR;
+	dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
+
+	switch (fb->pixel_format) {
+	case DRM_FORMAT_XBGR8888:
+		dvscntr |= DVS_FORMAT_RGBX888 | DVS_RGB_ORDER_XBGR;
+		pixel_size = 4;
+		break;
+	case DRM_FORMAT_XRGB8888:
+		dvscntr |= DVS_FORMAT_RGBX888;
+		pixel_size = 4;
+		break;
+	case DRM_FORMAT_YUYV:
+		dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YUYV;
+		pixel_size = 2;
+		break;
+	case DRM_FORMAT_YVYU:
+		dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YVYU;
+		pixel_size = 2;
+		break;
+	case DRM_FORMAT_UYVY:
+		dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_UYVY;
+		pixel_size = 2;
+		break;
+	case DRM_FORMAT_VYUY:
+		dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_VYUY;
+		pixel_size = 2;
+		break;
+	default:
+		DRM_DEBUG_DRIVER("bad pixel format, assuming RGBX888\n");
+		dvscntr |= DVS_FORMAT_RGBX888;
+		pixel_size = 4;
+		break;
+	}
+
+	if (obj->tiling_mode != I915_TILING_NONE)
+		dvscntr |= DVS_TILED;
+
+	/* must disable */
+	dvscntr |= DVS_TRICKLE_FEED_DISABLE;
+	dvscntr |= DVS_ENABLE;
+
+	/* Sizes are 0 based */
+	src_w--;
+	src_h--;
+	crtc_w--;
+	crtc_h--;
+
+	intel_update_sprite_watermarks(dev, pipe, crtc_w, pixel_size);
+
+	if (crtc_w != src_w || crtc_h != src_h)
+		dvsscale = DVS_SCALE_ENABLE | (src_w << 16) | src_h;
+
+	I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
+	I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
+	if (obj->tiling_mode != I915_TILING_NONE) {
+		I915_WRITE(DVSTILEOFF(pipe), (y << 16) | x);
+	} else {
+		unsigned long offset;
+
+		offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
+		I915_WRITE(DVSLINOFF(pipe), offset);
+	}
+	I915_WRITE(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
+	I915_WRITE(DVSSCALE(pipe), dvsscale);
+	I915_WRITE(DVSCNTR(pipe), dvscntr);
+	I915_WRITE(DVSSURF(pipe), obj->gtt_offset);
+	POSTING_READ(DVSSURF(pipe));
+}
+
+static void
+snb_disable_plane(struct drm_plane *plane)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	int pipe = intel_plane->pipe;
+
+	I915_WRITE(DVSCNTR(pipe), I915_READ(DVSCNTR(pipe)) & ~DVS_ENABLE);
+	/* Disable the scaler */
+	I915_WRITE(DVSSCALE(pipe), 0);
+	/* Flush double buffered register updates */
+	I915_WRITE(DVSSURF(pipe), 0);
+	POSTING_READ(DVSSURF(pipe));
+}
+
+static void
+intel_enable_primary(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int reg = DSPCNTR(intel_crtc->plane);
+
+	I915_WRITE(reg, I915_READ(reg) | DISPLAY_PLANE_ENABLE);
+}
+
+static void
+intel_disable_primary(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int reg = DSPCNTR(intel_crtc->plane);
+
+	I915_WRITE(reg, I915_READ(reg) & ~DISPLAY_PLANE_ENABLE);
+}
+
+static int
+snb_update_colorkey(struct drm_plane *plane,
+		    struct drm_intel_sprite_colorkey *key)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane;
+	u32 dvscntr;
+	int ret = 0;
+
+	intel_plane = to_intel_plane(plane);
+
+	I915_WRITE(DVSKEYVAL(intel_plane->pipe), key->min_value);
+	I915_WRITE(DVSKEYMAX(intel_plane->pipe), key->max_value);
+	I915_WRITE(DVSKEYMSK(intel_plane->pipe), key->channel_mask);
+
+	dvscntr = I915_READ(DVSCNTR(intel_plane->pipe));
+	dvscntr &= ~(DVS_SOURCE_KEY | DVS_DEST_KEY);
+	if (key->flags & I915_SET_COLORKEY_DESTINATION)
+		dvscntr |= DVS_DEST_KEY;
+	else if (key->flags & I915_SET_COLORKEY_SOURCE)
+		dvscntr |= DVS_SOURCE_KEY;
+	I915_WRITE(DVSCNTR(intel_plane->pipe), dvscntr);
+
+	POSTING_READ(DVSKEYMSK(intel_plane->pipe));
+
+	return ret;
+}
+
+static void
+snb_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane;
+	u32 dvscntr;
+
+	intel_plane = to_intel_plane(plane);
+
+	key->min_value = I915_READ(DVSKEYVAL(intel_plane->pipe));
+	key->max_value = I915_READ(DVSKEYMAX(intel_plane->pipe));
+	key->channel_mask = I915_READ(DVSKEYMSK(intel_plane->pipe));
+	key->flags = 0;
+
+	dvscntr = I915_READ(DVSCNTR(intel_plane->pipe));
+
+	if (dvscntr & DVS_DEST_KEY)
+		key->flags = I915_SET_COLORKEY_DESTINATION;
+	else if (dvscntr & DVS_SOURCE_KEY)
+		key->flags = I915_SET_COLORKEY_SOURCE;
+	else
+		key->flags = I915_SET_COLORKEY_NONE;
+}
+
+static int
+intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
+		   struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+		   unsigned int crtc_w, unsigned int crtc_h,
+		   uint32_t src_x, uint32_t src_y,
+		   uint32_t src_w, uint32_t src_h)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj, *old_obj;
+	int pipe = intel_plane->pipe;
+	int ret = 0;
+	int x = src_x >> 16, y = src_y >> 16;
+	int primary_w = crtc->mode.hdisplay, primary_h = crtc->mode.vdisplay;
+	bool disable_primary = false;
+
+	intel_fb = to_intel_framebuffer(fb);
+	obj = intel_fb->obj;
+
+	old_obj = intel_plane->obj;
+
+	src_w = src_w >> 16;
+	src_h = src_h >> 16;
+
+	/* Pipe must be running... */
+	if (!(I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE))
+		return -EINVAL;
+
+	if (crtc_x >= primary_w || crtc_y >= primary_h)
+		return -EINVAL;
+
+	/* Don't modify another pipe's plane */
+	if (intel_plane->pipe != intel_crtc->pipe)
+		return -EINVAL;
+
+	/*
+	 * Clamp the width & height into the visible area.  Note we don't
+	 * try to scale the source if part of the visible region is offscreen.
+	 * The caller must handle that by adjusting source offset and size.
+	 */
+	if ((crtc_x < 0) && ((crtc_x + crtc_w) > 0)) {
+		crtc_w += crtc_x;
+		crtc_x = 0;
+	}
+	if ((crtc_x + crtc_w) <= 0) /* Nothing to display */
+		goto out;
+	if ((crtc_x + crtc_w) > primary_w)
+		crtc_w = primary_w - crtc_x;
+
+	if ((crtc_y < 0) && ((crtc_y + crtc_h) > 0)) {
+		crtc_h += crtc_y;
+		crtc_y = 0;
+	}
+	if ((crtc_y + crtc_h) <= 0) /* Nothing to display */
+		goto out;
+	if (crtc_y + crtc_h > primary_h)
+		crtc_h = primary_h - crtc_y;
+
+	if (!crtc_w || !crtc_h) /* Again, nothing to display */
+		goto out;
+
+	/*
+	 * We can take a larger source and scale it down, but
+	 * only so much...  16x is the max on SNB.
+	 */
+	if (((src_w * src_h) / (crtc_w * crtc_h)) > intel_plane->max_downscale)
+		return -EINVAL;
+
+	/*
+	 * If the sprite is completely covering the primary plane,
+	 * we can disable the primary and save power.
+	 */
+	if ((crtc_x == 0) && (crtc_y == 0) &&
+	    (crtc_w == primary_w) && (crtc_h == primary_h))
+		disable_primary = true;
+
+	mutex_lock(&dev->struct_mutex);
+
+	ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
+	if (ret)
+		goto out_unlock;
+
+	intel_plane->obj = obj;
+
+	/*
+	 * Be sure to re-enable the primary before the sprite is no longer
+	 * covering it fully.
+	 */
+	if (!disable_primary && intel_plane->primary_disabled) {
+		intel_enable_primary(crtc);
+		intel_plane->primary_disabled = false;
+	}
+
+	intel_plane->update_plane(plane, fb, obj, crtc_x, crtc_y,
+				  crtc_w, crtc_h, x, y, src_w, src_h);
+
+	if (disable_primary) {
+		intel_disable_primary(crtc);
+		intel_plane->primary_disabled = true;
+	}
+
+	/* Unpin old obj after new one is active to avoid ugliness */
+	if (old_obj) {
+		/*
+		 * It's fairly common to simply update the position of
+		 * an existing object.  In that case, we don't need to
+		 * wait for vblank to avoid ugliness, we only need to
+		 * do the pin & ref bookkeeping.
+		 */
+		if (old_obj != obj) {
+			mutex_unlock(&dev->struct_mutex);
+			intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe);
+			mutex_lock(&dev->struct_mutex);
+		}
+		intel_unpin_fb_obj(old_obj);
+	}
+
+out_unlock:
+	mutex_unlock(&dev->struct_mutex);
+out:
+	return ret;
+}
+
+static int
+intel_disable_plane(struct drm_plane *plane)
+{
+	struct drm_device *dev = plane->dev;
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	int ret = 0;
+
+	if (intel_plane->primary_disabled) {
+		intel_enable_primary(plane->crtc);
+		intel_plane->primary_disabled = false;
+	}
+
+	intel_plane->disable_plane(plane);
+
+	if (!intel_plane->obj)
+		goto out;
+
+	mutex_lock(&dev->struct_mutex);
+	intel_unpin_fb_obj(intel_plane->obj);
+	intel_plane->obj = NULL;
+	mutex_unlock(&dev->struct_mutex);
+out:
+
+	return ret;
+}
+
+static void intel_destroy_plane(struct drm_plane *plane)
+{
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	intel_disable_plane(plane);
+	drm_plane_cleanup(plane);
+	kfree(intel_plane);
+}
+
+int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
+			      struct drm_file *file_priv)
+{
+	struct drm_intel_sprite_colorkey *set = data;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_mode_object *obj;
+	struct drm_plane *plane;
+	struct intel_plane *intel_plane;
+	int ret = 0;
+
+	if (!dev_priv)
+		return -EINVAL;
+
+	/* Make sure we don't try to enable both src & dest simultaneously */
+	if ((set->flags & (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE)) == (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE))
+		return -EINVAL;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	obj = drm_mode_object_find(dev, set->plane_id, DRM_MODE_OBJECT_PLANE);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	plane = obj_to_plane(obj);
+	intel_plane = to_intel_plane(plane);
+	ret = intel_plane->update_colorkey(plane, set);
+
+out_unlock:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+int intel_sprite_get_colorkey(struct drm_device *dev, void *data,
+			      struct drm_file *file_priv)
+{
+	struct drm_intel_sprite_colorkey *get = data;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_mode_object *obj;
+	struct drm_plane *plane;
+	struct intel_plane *intel_plane;
+	int ret = 0;
+
+	if (!dev_priv)
+		return -EINVAL;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	obj = drm_mode_object_find(dev, get->plane_id, DRM_MODE_OBJECT_PLANE);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	plane = obj_to_plane(obj);
+	intel_plane = to_intel_plane(plane);
+	intel_plane->get_colorkey(plane, get);
+
+out_unlock:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+static const struct drm_plane_funcs intel_plane_funcs = {
+	.update_plane = intel_update_plane,
+	.disable_plane = intel_disable_plane,
+	.destroy = intel_destroy_plane,
+};
+
+static uint32_t snb_plane_formats[] = {
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+};
+
+int
+intel_plane_init(struct drm_device *dev, enum pipe pipe)
+{
+	struct intel_plane *intel_plane;
+	unsigned long possible_crtcs;
+	int ret;
+
+	if (!(IS_GEN6(dev) || IS_GEN7(dev)))
+		return -ENODEV;
+
+	intel_plane = kzalloc(sizeof(struct intel_plane), GFP_KERNEL);
+	if (!intel_plane)
+		return -ENOMEM;
+
+	if (IS_GEN6(dev)) {
+		intel_plane->max_downscale = 16;
+		intel_plane->update_plane = snb_update_plane;
+		intel_plane->disable_plane = snb_disable_plane;
+		intel_plane->update_colorkey = snb_update_colorkey;
+		intel_plane->get_colorkey = snb_get_colorkey;
+	} else if (IS_GEN7(dev)) {
+		intel_plane->max_downscale = 2;
+		intel_plane->update_plane = ivb_update_plane;
+		intel_plane->disable_plane = ivb_disable_plane;
+		intel_plane->update_colorkey = ivb_update_colorkey;
+		intel_plane->get_colorkey = ivb_get_colorkey;
+	}
+
+	intel_plane->pipe = pipe;
+	possible_crtcs = (1 << pipe);
+	ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs,
+			     &intel_plane_funcs, snb_plane_formats,
+			     ARRAY_SIZE(snb_plane_formats), false);
+	if (ret)
+		kfree(intel_plane);
+
+	return ret;
+}
+
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
new file mode 100644
index 00000000..c82b1d4f
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -0,0 +1,1662 @@
+/*
+ * Copyright © 2006-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+/** @file
+ * Integrated TV-out support for the 915GM and 945GM.
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_edid.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+enum tv_margin {
+	TV_MARGIN_LEFT, TV_MARGIN_TOP,
+	TV_MARGIN_RIGHT, TV_MARGIN_BOTTOM
+};
+
+/** Private structure for the integrated TV support */
+struct intel_tv {
+	struct intel_encoder base;
+
+	int type;
+	const char *tv_format;
+	int margin[4];
+	u32 save_TV_H_CTL_1;
+	u32 save_TV_H_CTL_2;
+	u32 save_TV_H_CTL_3;
+	u32 save_TV_V_CTL_1;
+	u32 save_TV_V_CTL_2;
+	u32 save_TV_V_CTL_3;
+	u32 save_TV_V_CTL_4;
+	u32 save_TV_V_CTL_5;
+	u32 save_TV_V_CTL_6;
+	u32 save_TV_V_CTL_7;
+	u32 save_TV_SC_CTL_1, save_TV_SC_CTL_2, save_TV_SC_CTL_3;
+
+	u32 save_TV_CSC_Y;
+	u32 save_TV_CSC_Y2;
+	u32 save_TV_CSC_U;
+	u32 save_TV_CSC_U2;
+	u32 save_TV_CSC_V;
+	u32 save_TV_CSC_V2;
+	u32 save_TV_CLR_KNOBS;
+	u32 save_TV_CLR_LEVEL;
+	u32 save_TV_WIN_POS;
+	u32 save_TV_WIN_SIZE;
+	u32 save_TV_FILTER_CTL_1;
+	u32 save_TV_FILTER_CTL_2;
+	u32 save_TV_FILTER_CTL_3;
+
+	u32 save_TV_H_LUMA[60];
+	u32 save_TV_H_CHROMA[60];
+	u32 save_TV_V_LUMA[43];
+	u32 save_TV_V_CHROMA[43];
+
+	u32 save_TV_DAC;
+	u32 save_TV_CTL;
+};
+
+struct video_levels {
+	int blank, black, burst;
+};
+
+struct color_conversion {
+	u16 ry, gy, by, ay;
+	u16 ru, gu, bu, au;
+	u16 rv, gv, bv, av;
+};
+
+static const u32 filter_table[] = {
+	0xB1403000, 0x2E203500, 0x35002E20, 0x3000B140,
+	0x35A0B160, 0x2DC02E80, 0xB1403480, 0xB1603000,
+	0x2EA03640, 0x34002D80, 0x3000B120, 0x36E0B160,
+	0x2D202EF0, 0xB1203380, 0xB1603000, 0x2F303780,
+	0x33002CC0, 0x3000B100, 0x3820B160, 0x2C802F50,
+	0xB10032A0, 0xB1603000, 0x2F9038C0, 0x32202C20,
+	0x3000B0E0, 0x3980B160, 0x2BC02FC0, 0xB0E031C0,
+	0xB1603000, 0x2FF03A20, 0x31602B60, 0xB020B0C0,
+	0x3AE0B160, 0x2B001810, 0xB0C03120, 0xB140B020,
+	0x18283BA0, 0x30C02A80, 0xB020B0A0, 0x3C60B140,
+	0x2A201838, 0xB0A03080, 0xB120B020, 0x18383D20,
+	0x304029C0, 0xB040B080, 0x3DE0B100, 0x29601848,
+	0xB0803000, 0xB100B040, 0x18483EC0, 0xB0402900,
+	0xB040B060, 0x3F80B0C0, 0x28801858, 0xB060B080,
+	0xB0A0B060, 0x18602820, 0xB0A02820, 0x0000B060,
+	0xB1403000, 0x2E203500, 0x35002E20, 0x3000B140,
+	0x35A0B160, 0x2DC02E80, 0xB1403480, 0xB1603000,
+	0x2EA03640, 0x34002D80, 0x3000B120, 0x36E0B160,
+	0x2D202EF0, 0xB1203380, 0xB1603000, 0x2F303780,
+	0x33002CC0, 0x3000B100, 0x3820B160, 0x2C802F50,
+	0xB10032A0, 0xB1603000, 0x2F9038C0, 0x32202C20,
+	0x3000B0E0, 0x3980B160, 0x2BC02FC0, 0xB0E031C0,
+	0xB1603000, 0x2FF03A20, 0x31602B60, 0xB020B0C0,
+	0x3AE0B160, 0x2B001810, 0xB0C03120, 0xB140B020,
+	0x18283BA0, 0x30C02A80, 0xB020B0A0, 0x3C60B140,
+	0x2A201838, 0xB0A03080, 0xB120B020, 0x18383D20,
+	0x304029C0, 0xB040B080, 0x3DE0B100, 0x29601848,
+	0xB0803000, 0xB100B040, 0x18483EC0, 0xB0402900,
+	0xB040B060, 0x3F80B0C0, 0x28801858, 0xB060B080,
+	0xB0A0B060, 0x18602820, 0xB0A02820, 0x0000B060,
+	0x36403000, 0x2D002CC0, 0x30003640, 0x2D0036C0,
+	0x35C02CC0, 0x37403000, 0x2C802D40, 0x30003540,
+	0x2D8037C0, 0x34C02C40, 0x38403000, 0x2BC02E00,
+	0x30003440, 0x2E2038C0, 0x34002B80, 0x39803000,
+	0x2B402E40, 0x30003380, 0x2E603A00, 0x33402B00,
+	0x3A803040, 0x2A802EA0, 0x30403300, 0x2EC03B40,
+	0x32802A40, 0x3C003040, 0x2A002EC0, 0x30803240,
+	0x2EC03C80, 0x320029C0, 0x3D403080, 0x29402F00,
+	0x308031C0, 0x2F203DC0, 0x31802900, 0x3E8030C0,
+	0x28802F40, 0x30C03140, 0x2F203F40, 0x31402840,
+	0x28003100, 0x28002F00, 0x00003100, 0x36403000,
+	0x2D002CC0, 0x30003640, 0x2D0036C0,
+	0x35C02CC0, 0x37403000, 0x2C802D40, 0x30003540,
+	0x2D8037C0, 0x34C02C40, 0x38403000, 0x2BC02E00,
+	0x30003440, 0x2E2038C0, 0x34002B80, 0x39803000,
+	0x2B402E40, 0x30003380, 0x2E603A00, 0x33402B00,
+	0x3A803040, 0x2A802EA0, 0x30403300, 0x2EC03B40,
+	0x32802A40, 0x3C003040, 0x2A002EC0, 0x30803240,
+	0x2EC03C80, 0x320029C0, 0x3D403080, 0x29402F00,
+	0x308031C0, 0x2F203DC0, 0x31802900, 0x3E8030C0,
+	0x28802F40, 0x30C03140, 0x2F203F40, 0x31402840,
+	0x28003100, 0x28002F00, 0x00003100,
+};
+
+/*
+ * Color conversion values have 3 separate fixed point formats:
+ *
+ * 10 bit fields (ay, au)
+ *   1.9 fixed point (b.bbbbbbbbb)
+ * 11 bit fields (ry, by, ru, gu, gv)
+ *   exp.mantissa (ee.mmmmmmmmm)
+ *   ee = 00 = 10^-1 (0.mmmmmmmmm)
+ *   ee = 01 = 10^-2 (0.0mmmmmmmmm)
+ *   ee = 10 = 10^-3 (0.00mmmmmmmmm)
+ *   ee = 11 = 10^-4 (0.000mmmmmmmmm)
+ * 12 bit fields (gy, rv, bu)
+ *   exp.mantissa (eee.mmmmmmmmm)
+ *   eee = 000 = 10^-1 (0.mmmmmmmmm)
+ *   eee = 001 = 10^-2 (0.0mmmmmmmmm)
+ *   eee = 010 = 10^-3 (0.00mmmmmmmmm)
+ *   eee = 011 = 10^-4 (0.000mmmmmmmmm)
+ *   eee = 100 = reserved
+ *   eee = 101 = reserved
+ *   eee = 110 = reserved
+ *   eee = 111 = 10^0 (m.mmmmmmmm) (only usable for 1.0 representation)
+ *
+ * Saturation and contrast are 8 bits, with their own representation:
+ * 8 bit field (saturation, contrast)
+ *   exp.mantissa (ee.mmmmmm)
+ *   ee = 00 = 10^-1 (0.mmmmmm)
+ *   ee = 01 = 10^0 (m.mmmmm)
+ *   ee = 10 = 10^1 (mm.mmmm)
+ *   ee = 11 = 10^2 (mmm.mmm)
+ *
+ * Simple conversion function:
+ *
+ * static u32
+ * float_to_csc_11(float f)
+ * {
+ *     u32 exp;
+ *     u32 mant;
+ *     u32 ret;
+ *
+ *     if (f < 0)
+ *         f = -f;
+ *
+ *     if (f >= 1) {
+ *         exp = 0x7;
+ *	   mant = 1 << 8;
+ *     } else {
+ *         for (exp = 0; exp < 3 && f < 0.5; exp++)
+ *	   f *= 2.0;
+ *         mant = (f * (1 << 9) + 0.5);
+ *         if (mant >= (1 << 9))
+ *             mant = (1 << 9) - 1;
+ *     }
+ *     ret = (exp << 9) | mant;
+ *     return ret;
+ * }
+ */
+
+/*
+ * Behold, magic numbers!  If we plant them they might grow a big
+ * s-video cable to the sky... or something.
+ *
+ * Pre-converted to appropriate hex value.
+ */
+
+/*
+ * PAL & NTSC values for composite & s-video connections
+ */
+static const struct color_conversion ntsc_m_csc_composite = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104,
+	.ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0200,
+	.rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0200,
+};
+
+static const struct video_levels ntsc_m_levels_composite = {
+	.blank = 225, .black = 267, .burst = 113,
+};
+
+static const struct color_conversion ntsc_m_csc_svideo = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0133,
+	.ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0200,
+	.rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0200,
+};
+
+static const struct video_levels ntsc_m_levels_svideo = {
+	.blank = 266, .black = 316, .burst = 133,
+};
+
+static const struct color_conversion ntsc_j_csc_composite = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0119,
+	.ru = 0x074c, .gu = 0x0546, .bu = 0x05ec, .au = 0x0200,
+	.rv = 0x035a, .gv = 0x0322, .bv = 0x06e1, .av = 0x0200,
+};
+
+static const struct video_levels ntsc_j_levels_composite = {
+	.blank = 225, .black = 225, .burst = 113,
+};
+
+static const struct color_conversion ntsc_j_csc_svideo = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x014c,
+	.ru = 0x0788, .gu = 0x0581, .bu = 0x0322, .au = 0x0200,
+	.rv = 0x0399, .gv = 0x0356, .bv = 0x070a, .av = 0x0200,
+};
+
+static const struct video_levels ntsc_j_levels_svideo = {
+	.blank = 266, .black = 266, .burst = 133,
+};
+
+static const struct color_conversion pal_csc_composite = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0113,
+	.ru = 0x0745, .gu = 0x053f, .bu = 0x05e1, .au = 0x0200,
+	.rv = 0x0353, .gv = 0x031c, .bv = 0x06dc, .av = 0x0200,
+};
+
+static const struct video_levels pal_levels_composite = {
+	.blank = 237, .black = 237, .burst = 118,
+};
+
+static const struct color_conversion pal_csc_svideo = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0145,
+	.ru = 0x0780, .gu = 0x0579, .bu = 0x031c, .au = 0x0200,
+	.rv = 0x0390, .gv = 0x034f, .bv = 0x0705, .av = 0x0200,
+};
+
+static const struct video_levels pal_levels_svideo = {
+	.blank = 280, .black = 280, .burst = 139,
+};
+
+static const struct color_conversion pal_m_csc_composite = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104,
+	.ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0200,
+	.rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0200,
+};
+
+static const struct video_levels pal_m_levels_composite = {
+	.blank = 225, .black = 267, .burst = 113,
+};
+
+static const struct color_conversion pal_m_csc_svideo = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0133,
+	.ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0200,
+	.rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0200,
+};
+
+static const struct video_levels pal_m_levels_svideo = {
+	.blank = 266, .black = 316, .burst = 133,
+};
+
+static const struct color_conversion pal_n_csc_composite = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104,
+	.ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0200,
+	.rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0200,
+};
+
+static const struct video_levels pal_n_levels_composite = {
+	.blank = 225, .black = 267, .burst = 118,
+};
+
+static const struct color_conversion pal_n_csc_svideo = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0133,
+	.ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0200,
+	.rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0200,
+};
+
+static const struct video_levels pal_n_levels_svideo = {
+	.blank = 266, .black = 316, .burst = 139,
+};
+
+/*
+ * Component connections
+ */
+static const struct color_conversion sdtv_csc_yprpb = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0145,
+	.ru = 0x0559, .gu = 0x0353, .bu = 0x0100, .au = 0x0200,
+	.rv = 0x0100, .gv = 0x03ad, .bv = 0x074d, .av = 0x0200,
+};
+
+static const struct color_conversion sdtv_csc_rgb = {
+	.ry = 0x0000, .gy = 0x0f00, .by = 0x0000, .ay = 0x0166,
+	.ru = 0x0000, .gu = 0x0000, .bu = 0x0f00, .au = 0x0166,
+	.rv = 0x0f00, .gv = 0x0000, .bv = 0x0000, .av = 0x0166,
+};
+
+static const struct color_conversion hdtv_csc_yprpb = {
+	.ry = 0x05b3, .gy = 0x016e, .by = 0x0728, .ay = 0x0145,
+	.ru = 0x07d5, .gu = 0x038b, .bu = 0x0100, .au = 0x0200,
+	.rv = 0x0100, .gv = 0x03d1, .bv = 0x06bc, .av = 0x0200,
+};
+
+static const struct color_conversion hdtv_csc_rgb = {
+	.ry = 0x0000, .gy = 0x0f00, .by = 0x0000, .ay = 0x0166,
+	.ru = 0x0000, .gu = 0x0000, .bu = 0x0f00, .au = 0x0166,
+	.rv = 0x0f00, .gv = 0x0000, .bv = 0x0000, .av = 0x0166,
+};
+
+static const struct video_levels component_levels = {
+	.blank = 279, .black = 279, .burst = 0,
+};
+
+
+struct tv_mode {
+	const char *name;
+	int clock;
+	int refresh; /* in millihertz (for precision) */
+	u32 oversample;
+	int hsync_end, hblank_start, hblank_end, htotal;
+	bool progressive, trilevel_sync, component_only;
+	int vsync_start_f1, vsync_start_f2, vsync_len;
+	bool veq_ena;
+	int veq_start_f1, veq_start_f2, veq_len;
+	int vi_end_f1, vi_end_f2, nbr_end;
+	bool burst_ena;
+	int hburst_start, hburst_len;
+	int vburst_start_f1, vburst_end_f1;
+	int vburst_start_f2, vburst_end_f2;
+	int vburst_start_f3, vburst_end_f3;
+	int vburst_start_f4, vburst_end_f4;
+	/*
+	 * subcarrier programming
+	 */
+	int dda2_size, dda3_size, dda1_inc, dda2_inc, dda3_inc;
+	u32 sc_reset;
+	bool pal_burst;
+	/*
+	 * blank/black levels
+	 */
+	const struct video_levels *composite_levels, *svideo_levels;
+	const struct color_conversion *composite_color, *svideo_color;
+	const u32 *filter_table;
+	int max_srcw;
+};
+
+
+/*
+ * Sub carrier DDA
+ *
+ *  I think this works as follows:
+ *
+ *  subcarrier freq = pixel_clock * (dda1_inc + dda2_inc / dda2_size) / 4096
+ *
+ * Presumably, when dda3 is added in, it gets to adjust the dda2_inc value
+ *
+ * So,
+ *  dda1_ideal = subcarrier/pixel * 4096
+ *  dda1_inc = floor (dda1_ideal)
+ *  dda2 = dda1_ideal - dda1_inc
+ *
+ *  then pick a ratio for dda2 that gives the closest approximation. If
+ *  you can't get close enough, you can play with dda3 as well. This
+ *  seems likely to happen when dda2 is small as the jumps would be larger
+ *
+ * To invert this,
+ *
+ *  pixel_clock = subcarrier * 4096 / (dda1_inc + dda2_inc / dda2_size)
+ *
+ * The constants below were all computed using a 107.520MHz clock
+ */
+
+/**
+ * Register programming values for TV modes.
+ *
+ * These values account for -1s required.
+ */
+
+static const struct tv_mode tv_modes[] = {
+	{
+		.name		= "NTSC-M",
+		.clock		= 108000,
+		.refresh	= 59940,
+		.oversample	= TV_OVERSAMPLE_8X,
+		.component_only = 0,
+		/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */
+
+		.hsync_end	= 64,		    .hblank_end		= 124,
+		.hblank_start	= 836,		    .htotal		= 857,
+
+		.progressive	= false,	    .trilevel_sync = false,
+
+		.vsync_start_f1	= 6,		    .vsync_start_f2	= 7,
+		.vsync_len	= 6,
+
+		.veq_ena	= true,		    .veq_start_f1	= 0,
+		.veq_start_f2	= 1,		    .veq_len		= 18,
+
+		.vi_end_f1	= 20,		    .vi_end_f2		= 21,
+		.nbr_end	= 240,
+
+		.burst_ena	= true,
+		.hburst_start	= 72,		    .hburst_len		= 34,
+		.vburst_start_f1 = 9,		    .vburst_end_f1	= 240,
+		.vburst_start_f2 = 10,		    .vburst_end_f2	= 240,
+		.vburst_start_f3 = 9,		    .vburst_end_f3	= 240,
+		.vburst_start_f4 = 10,		    .vburst_end_f4	= 240,
+
+		/* desired 3.5800000 actual 3.5800000 clock 107.52 */
+		.dda1_inc	=    135,
+		.dda2_inc	=  20800,	    .dda2_size		=  27456,
+		.dda3_inc	=      0,	    .dda3_size		=      0,
+		.sc_reset	= TV_SC_RESET_EVERY_4,
+		.pal_burst	= false,
+
+		.composite_levels = &ntsc_m_levels_composite,
+		.composite_color = &ntsc_m_csc_composite,
+		.svideo_levels  = &ntsc_m_levels_svideo,
+		.svideo_color = &ntsc_m_csc_svideo,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name		= "NTSC-443",
+		.clock		= 108000,
+		.refresh	= 59940,
+		.oversample	= TV_OVERSAMPLE_8X,
+		.component_only = 0,
+		/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 4.43MHz */
+		.hsync_end	= 64,		    .hblank_end		= 124,
+		.hblank_start	= 836,		    .htotal		= 857,
+
+		.progressive	= false,	    .trilevel_sync = false,
+
+		.vsync_start_f1 = 6,		    .vsync_start_f2	= 7,
+		.vsync_len	= 6,
+
+		.veq_ena	= true,		    .veq_start_f1	= 0,
+		.veq_start_f2	= 1,		    .veq_len		= 18,
+
+		.vi_end_f1	= 20,		    .vi_end_f2		= 21,
+		.nbr_end	= 240,
+
+		.burst_ena	= true,
+		.hburst_start	= 72,		    .hburst_len		= 34,
+		.vburst_start_f1 = 9,		    .vburst_end_f1	= 240,
+		.vburst_start_f2 = 10,		    .vburst_end_f2	= 240,
+		.vburst_start_f3 = 9,		    .vburst_end_f3	= 240,
+		.vburst_start_f4 = 10,		    .vburst_end_f4	= 240,
+
+		/* desired 4.4336180 actual 4.4336180 clock 107.52 */
+		.dda1_inc       =    168,
+		.dda2_inc       =   4093,       .dda2_size      =  27456,
+		.dda3_inc       =    310,       .dda3_size      =    525,
+		.sc_reset   = TV_SC_RESET_NEVER,
+		.pal_burst  = false,
+
+		.composite_levels = &ntsc_m_levels_composite,
+		.composite_color = &ntsc_m_csc_composite,
+		.svideo_levels  = &ntsc_m_levels_svideo,
+		.svideo_color = &ntsc_m_csc_svideo,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name		= "NTSC-J",
+		.clock		= 108000,
+		.refresh	= 59940,
+		.oversample	= TV_OVERSAMPLE_8X,
+		.component_only = 0,
+
+		/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */
+		.hsync_end	= 64,		    .hblank_end		= 124,
+		.hblank_start = 836,	    .htotal		= 857,
+
+		.progressive	= false,    .trilevel_sync = false,
+
+		.vsync_start_f1	= 6,	    .vsync_start_f2	= 7,
+		.vsync_len	= 6,
+
+		.veq_ena      = true,	    .veq_start_f1	= 0,
+		.veq_start_f2 = 1,	    .veq_len		= 18,
+
+		.vi_end_f1	= 20,		    .vi_end_f2		= 21,
+		.nbr_end	= 240,
+
+		.burst_ena	= true,
+		.hburst_start	= 72,		    .hburst_len		= 34,
+		.vburst_start_f1 = 9,		    .vburst_end_f1	= 240,
+		.vburst_start_f2 = 10,		    .vburst_end_f2	= 240,
+		.vburst_start_f3 = 9,		    .vburst_end_f3	= 240,
+		.vburst_start_f4 = 10,		    .vburst_end_f4	= 240,
+
+		/* desired 3.5800000 actual 3.5800000 clock 107.52 */
+		.dda1_inc	=    135,
+		.dda2_inc	=  20800,	    .dda2_size		=  27456,
+		.dda3_inc	=      0,	    .dda3_size		=      0,
+		.sc_reset	= TV_SC_RESET_EVERY_4,
+		.pal_burst	= false,
+
+		.composite_levels = &ntsc_j_levels_composite,
+		.composite_color = &ntsc_j_csc_composite,
+		.svideo_levels  = &ntsc_j_levels_svideo,
+		.svideo_color = &ntsc_j_csc_svideo,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name		= "PAL-M",
+		.clock		= 108000,
+		.refresh	= 59940,
+		.oversample	= TV_OVERSAMPLE_8X,
+		.component_only = 0,
+
+		/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */
+		.hsync_end	= 64,		  .hblank_end		= 124,
+		.hblank_start = 836,	  .htotal		= 857,
+
+		.progressive	= false,	    .trilevel_sync = false,
+
+		.vsync_start_f1	= 6,		    .vsync_start_f2	= 7,
+		.vsync_len	= 6,
+
+		.veq_ena	= true,		    .veq_start_f1	= 0,
+		.veq_start_f2	= 1,		    .veq_len		= 18,
+
+		.vi_end_f1	= 20,		    .vi_end_f2		= 21,
+		.nbr_end	= 240,
+
+		.burst_ena	= true,
+		.hburst_start	= 72,		    .hburst_len		= 34,
+		.vburst_start_f1 = 9,		    .vburst_end_f1	= 240,
+		.vburst_start_f2 = 10,		    .vburst_end_f2	= 240,
+		.vburst_start_f3 = 9,		    .vburst_end_f3	= 240,
+		.vburst_start_f4 = 10,		    .vburst_end_f4	= 240,
+
+		/* desired 3.5800000 actual 3.5800000 clock 107.52 */
+		.dda1_inc	=    135,
+		.dda2_inc	=  16704,	    .dda2_size		=  27456,
+		.dda3_inc	=      0,	    .dda3_size		=      0,
+		.sc_reset	= TV_SC_RESET_EVERY_8,
+		.pal_burst  = true,
+
+		.composite_levels = &pal_m_levels_composite,
+		.composite_color = &pal_m_csc_composite,
+		.svideo_levels  = &pal_m_levels_svideo,
+		.svideo_color = &pal_m_csc_svideo,
+
+		.filter_table = filter_table,
+	},
+	{
+		/* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */
+		.name	    = "PAL-N",
+		.clock		= 108000,
+		.refresh	= 50000,
+		.oversample	= TV_OVERSAMPLE_8X,
+		.component_only = 0,
+
+		.hsync_end	= 64,		    .hblank_end		= 128,
+		.hblank_start = 844,	    .htotal		= 863,
+
+		.progressive  = false,    .trilevel_sync = false,
+
+
+		.vsync_start_f1	= 6,	   .vsync_start_f2	= 7,
+		.vsync_len	= 6,
+
+		.veq_ena	= true,		    .veq_start_f1	= 0,
+		.veq_start_f2	= 1,		    .veq_len		= 18,
+
+		.vi_end_f1	= 24,		    .vi_end_f2		= 25,
+		.nbr_end	= 286,
+
+		.burst_ena	= true,
+		.hburst_start = 73,	    .hburst_len		= 34,
+		.vburst_start_f1 = 8,	    .vburst_end_f1	= 285,
+		.vburst_start_f2 = 8,	    .vburst_end_f2	= 286,
+		.vburst_start_f3 = 9,	    .vburst_end_f3	= 286,
+		.vburst_start_f4 = 9,	    .vburst_end_f4	= 285,
+
+
+		/* desired 4.4336180 actual 4.4336180 clock 107.52 */
+		.dda1_inc       =    135,
+		.dda2_inc       =  23578,       .dda2_size      =  27648,
+		.dda3_inc       =    134,       .dda3_size      =    625,
+		.sc_reset   = TV_SC_RESET_EVERY_8,
+		.pal_burst  = true,
+
+		.composite_levels = &pal_n_levels_composite,
+		.composite_color = &pal_n_csc_composite,
+		.svideo_levels  = &pal_n_levels_svideo,
+		.svideo_color = &pal_n_csc_svideo,
+
+		.filter_table = filter_table,
+	},
+	{
+		/* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */
+		.name	    = "PAL",
+		.clock		= 108000,
+		.refresh	= 50000,
+		.oversample	= TV_OVERSAMPLE_8X,
+		.component_only = 0,
+
+		.hsync_end	= 64,		    .hblank_end		= 142,
+		.hblank_start	= 844,	    .htotal		= 863,
+
+		.progressive	= false,    .trilevel_sync = false,
+
+		.vsync_start_f1	= 5,	    .vsync_start_f2	= 6,
+		.vsync_len	= 5,
+
+		.veq_ena	= true,	    .veq_start_f1	= 0,
+		.veq_start_f2	= 1,	    .veq_len		= 15,
+
+		.vi_end_f1	= 24,		    .vi_end_f2		= 25,
+		.nbr_end	= 286,
+
+		.burst_ena	= true,
+		.hburst_start	= 73,		    .hburst_len		= 32,
+		.vburst_start_f1 = 8,		    .vburst_end_f1	= 285,
+		.vburst_start_f2 = 8,		    .vburst_end_f2	= 286,
+		.vburst_start_f3 = 9,		    .vburst_end_f3	= 286,
+		.vburst_start_f4 = 9,		    .vburst_end_f4	= 285,
+
+		/* desired 4.4336180 actual 4.4336180 clock 107.52 */
+		.dda1_inc       =    168,
+		.dda2_inc       =   4122,       .dda2_size      =  27648,
+		.dda3_inc       =     67,       .dda3_size      =    625,
+		.sc_reset   = TV_SC_RESET_EVERY_8,
+		.pal_burst  = true,
+
+		.composite_levels = &pal_levels_composite,
+		.composite_color = &pal_csc_composite,
+		.svideo_levels  = &pal_levels_svideo,
+		.svideo_color = &pal_csc_svideo,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "480p",
+		.clock		= 107520,
+		.refresh	= 59940,
+		.oversample     = TV_OVERSAMPLE_4X,
+		.component_only = 1,
+
+		.hsync_end      = 64,               .hblank_end         = 122,
+		.hblank_start   = 842,              .htotal             = 857,
+
+		.progressive    = true,		    .trilevel_sync = false,
+
+		.vsync_start_f1 = 12,               .vsync_start_f2     = 12,
+		.vsync_len      = 12,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 44,               .vi_end_f2          = 44,
+		.nbr_end        = 479,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "576p",
+		.clock		= 107520,
+		.refresh	= 50000,
+		.oversample     = TV_OVERSAMPLE_4X,
+		.component_only = 1,
+
+		.hsync_end      = 64,               .hblank_end         = 139,
+		.hblank_start   = 859,              .htotal             = 863,
+
+		.progressive    = true,		    .trilevel_sync = false,
+
+		.vsync_start_f1 = 10,               .vsync_start_f2     = 10,
+		.vsync_len      = 10,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 48,               .vi_end_f2          = 48,
+		.nbr_end        = 575,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "720p@60Hz",
+		.clock		= 148800,
+		.refresh	= 60000,
+		.oversample     = TV_OVERSAMPLE_2X,
+		.component_only = 1,
+
+		.hsync_end      = 80,               .hblank_end         = 300,
+		.hblank_start   = 1580,             .htotal             = 1649,
+
+		.progressive	= true,		    .trilevel_sync = true,
+
+		.vsync_start_f1 = 10,               .vsync_start_f2     = 10,
+		.vsync_len      = 10,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 29,               .vi_end_f2          = 29,
+		.nbr_end        = 719,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "720p@50Hz",
+		.clock		= 148800,
+		.refresh	= 50000,
+		.oversample     = TV_OVERSAMPLE_2X,
+		.component_only = 1,
+
+		.hsync_end      = 80,               .hblank_end         = 300,
+		.hblank_start   = 1580,             .htotal             = 1979,
+
+		.progressive	= true,		    .trilevel_sync = true,
+
+		.vsync_start_f1 = 10,               .vsync_start_f2     = 10,
+		.vsync_len      = 10,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 29,               .vi_end_f2          = 29,
+		.nbr_end        = 719,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+		.max_srcw = 800
+	},
+	{
+		.name       = "1080i@50Hz",
+		.clock		= 148800,
+		.refresh	= 50000,
+		.oversample     = TV_OVERSAMPLE_2X,
+		.component_only = 1,
+
+		.hsync_end      = 88,               .hblank_end         = 235,
+		.hblank_start   = 2155,             .htotal             = 2639,
+
+		.progressive	= false,	  .trilevel_sync = true,
+
+		.vsync_start_f1 = 4,              .vsync_start_f2     = 5,
+		.vsync_len      = 10,
+
+		.veq_ena	= true,	    .veq_start_f1	= 4,
+		.veq_start_f2   = 4,	    .veq_len		= 10,
+
+
+		.vi_end_f1      = 21,           .vi_end_f2          = 22,
+		.nbr_end        = 539,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "1080i@60Hz",
+		.clock		= 148800,
+		.refresh	= 60000,
+		.oversample     = TV_OVERSAMPLE_2X,
+		.component_only = 1,
+
+		.hsync_end      = 88,               .hblank_end         = 235,
+		.hblank_start   = 2155,             .htotal             = 2199,
+
+		.progressive	= false,	    .trilevel_sync = true,
+
+		.vsync_start_f1 = 4,               .vsync_start_f2     = 5,
+		.vsync_len      = 10,
+
+		.veq_ena	= true,		    .veq_start_f1	= 4,
+		.veq_start_f2	= 4,		    .veq_len		= 10,
+
+
+		.vi_end_f1      = 21,               .vi_end_f2          = 22,
+		.nbr_end        = 539,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+};
+
+static struct intel_tv *enc_to_intel_tv(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct intel_tv, base.base);
+}
+
+static struct intel_tv *intel_attached_tv(struct drm_connector *connector)
+{
+	return container_of(intel_attached_encoder(connector),
+			    struct intel_tv,
+			    base);
+}
+
+static void
+intel_tv_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		I915_WRITE(TV_CTL, I915_READ(TV_CTL) | TV_ENC_ENABLE);
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		I915_WRITE(TV_CTL, I915_READ(TV_CTL) & ~TV_ENC_ENABLE);
+		break;
+	}
+}
+
+static const struct tv_mode *
+intel_tv_mode_lookup(const char *tv_format)
+{
+	int i;
+
+	for (i = 0; i < sizeof(tv_modes) / sizeof(tv_modes[0]); i++) {
+		const struct tv_mode *tv_mode = &tv_modes[i];
+
+		if (!strcmp(tv_format, tv_mode->name))
+			return tv_mode;
+	}
+	return NULL;
+}
+
+static const struct tv_mode *
+intel_tv_mode_find(struct intel_tv *intel_tv)
+{
+	return intel_tv_mode_lookup(intel_tv->tv_format);
+}
+
+static enum drm_mode_status
+intel_tv_mode_valid(struct drm_connector *connector,
+		    struct drm_display_mode *mode)
+{
+	struct intel_tv *intel_tv = intel_attached_tv(connector);
+	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
+
+	/* Ensure TV refresh is close to desired refresh */
+	if (tv_mode && abs(tv_mode->refresh - drm_mode_vrefresh(mode) * 1000)
+				< 1000)
+		return MODE_OK;
+
+	return MODE_CLOCK_RANGE;
+}
+
+
+static bool
+intel_tv_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		    struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_mode_config *drm_config = &dev->mode_config;
+	struct intel_tv *intel_tv = enc_to_intel_tv(encoder);
+	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
+	struct drm_encoder *other_encoder;
+
+	if (!tv_mode)
+		return false;
+
+	/* FIXME: lock encoder list */
+	list_for_each_entry(other_encoder, &drm_config->encoder_list, head) {
+		if (other_encoder != encoder &&
+		    other_encoder->crtc == encoder->crtc)
+			return false;
+	}
+
+	adjusted_mode->clock = tv_mode->clock;
+	return true;
+}
+
+static void
+intel_tv_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		  struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_tv *intel_tv = enc_to_intel_tv(encoder);
+	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
+	u32 tv_ctl;
+	u32 hctl1, hctl2, hctl3;
+	u32 vctl1, vctl2, vctl3, vctl4, vctl5, vctl6, vctl7;
+	u32 scctl1, scctl2, scctl3;
+	int i, j;
+	const struct video_levels *video_levels;
+	const struct color_conversion *color_conversion;
+	bool burst_ena;
+	int pipe = intel_crtc->pipe;
+
+	if (!tv_mode)
+		return;	/* can't happen (mode_prepare prevents this) */
+
+	tv_ctl = I915_READ(TV_CTL);
+	tv_ctl &= TV_CTL_SAVE;
+
+	switch (intel_tv->type) {
+	default:
+	case DRM_MODE_CONNECTOR_Unknown:
+	case DRM_MODE_CONNECTOR_Composite:
+		tv_ctl |= TV_ENC_OUTPUT_COMPOSITE;
+		video_levels = tv_mode->composite_levels;
+		color_conversion = tv_mode->composite_color;
+		burst_ena = tv_mode->burst_ena;
+		break;
+	case DRM_MODE_CONNECTOR_Component:
+		tv_ctl |= TV_ENC_OUTPUT_COMPONENT;
+		video_levels = &component_levels;
+		if (tv_mode->burst_ena)
+			color_conversion = &sdtv_csc_yprpb;
+		else
+			color_conversion = &hdtv_csc_yprpb;
+		burst_ena = false;
+		break;
+	case DRM_MODE_CONNECTOR_SVIDEO:
+		tv_ctl |= TV_ENC_OUTPUT_SVIDEO;
+		video_levels = tv_mode->svideo_levels;
+		color_conversion = tv_mode->svideo_color;
+		burst_ena = tv_mode->burst_ena;
+		break;
+	}
+	hctl1 = (tv_mode->hsync_end << TV_HSYNC_END_SHIFT) |
+		(tv_mode->htotal << TV_HTOTAL_SHIFT);
+
+	hctl2 = (tv_mode->hburst_start << 16) |
+		(tv_mode->hburst_len << TV_HBURST_LEN_SHIFT);
+
+	if (burst_ena)
+		hctl2 |= TV_BURST_ENA;
+
+	hctl3 = (tv_mode->hblank_start << TV_HBLANK_START_SHIFT) |
+		(tv_mode->hblank_end << TV_HBLANK_END_SHIFT);
+
+	vctl1 = (tv_mode->nbr_end << TV_NBR_END_SHIFT) |
+		(tv_mode->vi_end_f1 << TV_VI_END_F1_SHIFT) |
+		(tv_mode->vi_end_f2 << TV_VI_END_F2_SHIFT);
+
+	vctl2 = (tv_mode->vsync_len << TV_VSYNC_LEN_SHIFT) |
+		(tv_mode->vsync_start_f1 << TV_VSYNC_START_F1_SHIFT) |
+		(tv_mode->vsync_start_f2 << TV_VSYNC_START_F2_SHIFT);
+
+	vctl3 = (tv_mode->veq_len << TV_VEQ_LEN_SHIFT) |
+		(tv_mode->veq_start_f1 << TV_VEQ_START_F1_SHIFT) |
+		(tv_mode->veq_start_f2 << TV_VEQ_START_F2_SHIFT);
+
+	if (tv_mode->veq_ena)
+		vctl3 |= TV_EQUAL_ENA;
+
+	vctl4 = (tv_mode->vburst_start_f1 << TV_VBURST_START_F1_SHIFT) |
+		(tv_mode->vburst_end_f1 << TV_VBURST_END_F1_SHIFT);
+
+	vctl5 = (tv_mode->vburst_start_f2 << TV_VBURST_START_F2_SHIFT) |
+		(tv_mode->vburst_end_f2 << TV_VBURST_END_F2_SHIFT);
+
+	vctl6 = (tv_mode->vburst_start_f3 << TV_VBURST_START_F3_SHIFT) |
+		(tv_mode->vburst_end_f3 << TV_VBURST_END_F3_SHIFT);
+
+	vctl7 = (tv_mode->vburst_start_f4 << TV_VBURST_START_F4_SHIFT) |
+		(tv_mode->vburst_end_f4 << TV_VBURST_END_F4_SHIFT);
+
+	if (intel_crtc->pipe == 1)
+		tv_ctl |= TV_ENC_PIPEB_SELECT;
+	tv_ctl |= tv_mode->oversample;
+
+	if (tv_mode->progressive)
+		tv_ctl |= TV_PROGRESSIVE;
+	if (tv_mode->trilevel_sync)
+		tv_ctl |= TV_TRILEVEL_SYNC;
+	if (tv_mode->pal_burst)
+		tv_ctl |= TV_PAL_BURST;
+
+	scctl1 = 0;
+	if (tv_mode->dda1_inc)
+		scctl1 |= TV_SC_DDA1_EN;
+	if (tv_mode->dda2_inc)
+		scctl1 |= TV_SC_DDA2_EN;
+	if (tv_mode->dda3_inc)
+		scctl1 |= TV_SC_DDA3_EN;
+	scctl1 |= tv_mode->sc_reset;
+	if (video_levels)
+		scctl1 |= video_levels->burst << TV_BURST_LEVEL_SHIFT;
+	scctl1 |= tv_mode->dda1_inc << TV_SCDDA1_INC_SHIFT;
+
+	scctl2 = tv_mode->dda2_size << TV_SCDDA2_SIZE_SHIFT |
+		tv_mode->dda2_inc << TV_SCDDA2_INC_SHIFT;
+
+	scctl3 = tv_mode->dda3_size << TV_SCDDA3_SIZE_SHIFT |
+		tv_mode->dda3_inc << TV_SCDDA3_INC_SHIFT;
+
+	/* Enable two fixes for the chips that need them. */
+	if (dev->pci_device < 0x2772)
+		tv_ctl |= TV_ENC_C0_FIX | TV_ENC_SDP_FIX;
+
+	I915_WRITE(TV_H_CTL_1, hctl1);
+	I915_WRITE(TV_H_CTL_2, hctl2);
+	I915_WRITE(TV_H_CTL_3, hctl3);
+	I915_WRITE(TV_V_CTL_1, vctl1);
+	I915_WRITE(TV_V_CTL_2, vctl2);
+	I915_WRITE(TV_V_CTL_3, vctl3);
+	I915_WRITE(TV_V_CTL_4, vctl4);
+	I915_WRITE(TV_V_CTL_5, vctl5);
+	I915_WRITE(TV_V_CTL_6, vctl6);
+	I915_WRITE(TV_V_CTL_7, vctl7);
+	I915_WRITE(TV_SC_CTL_1, scctl1);
+	I915_WRITE(TV_SC_CTL_2, scctl2);
+	I915_WRITE(TV_SC_CTL_3, scctl3);
+
+	if (color_conversion) {
+		I915_WRITE(TV_CSC_Y, (color_conversion->ry << 16) |
+			   color_conversion->gy);
+		I915_WRITE(TV_CSC_Y2, (color_conversion->by << 16) |
+			   color_conversion->ay);
+		I915_WRITE(TV_CSC_U, (color_conversion->ru << 16) |
+			   color_conversion->gu);
+		I915_WRITE(TV_CSC_U2, (color_conversion->bu << 16) |
+			   color_conversion->au);
+		I915_WRITE(TV_CSC_V, (color_conversion->rv << 16) |
+			   color_conversion->gv);
+		I915_WRITE(TV_CSC_V2, (color_conversion->bv << 16) |
+			   color_conversion->av);
+	}
+
+	if (INTEL_INFO(dev)->gen >= 4)
+		I915_WRITE(TV_CLR_KNOBS, 0x00404000);
+	else
+		I915_WRITE(TV_CLR_KNOBS, 0x00606000);
+
+	if (video_levels)
+		I915_WRITE(TV_CLR_LEVEL,
+			   ((video_levels->black << TV_BLACK_LEVEL_SHIFT) |
+			    (video_levels->blank << TV_BLANK_LEVEL_SHIFT)));
+	{
+		int pipeconf_reg = PIPECONF(pipe);
+		int dspcntr_reg = DSPCNTR(intel_crtc->plane);
+		int pipeconf = I915_READ(pipeconf_reg);
+		int dspcntr = I915_READ(dspcntr_reg);
+		int dspbase_reg = DSPADDR(intel_crtc->plane);
+		int xpos = 0x0, ypos = 0x0;
+		unsigned int xsize, ysize;
+		/* Pipe must be off here */
+		I915_WRITE(dspcntr_reg, dspcntr & ~DISPLAY_PLANE_ENABLE);
+		/* Flush the plane changes */
+		I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+
+		/* Wait for vblank for the disable to take effect */
+		if (IS_GEN2(dev))
+			intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+		I915_WRITE(pipeconf_reg, pipeconf & ~PIPECONF_ENABLE);
+		/* Wait for vblank for the disable to take effect. */
+		intel_wait_for_pipe_off(dev, intel_crtc->pipe);
+
+		/* Filter ctl must be set before TV_WIN_SIZE */
+		I915_WRITE(TV_FILTER_CTL_1, TV_AUTO_SCALE);
+		xsize = tv_mode->hblank_start - tv_mode->hblank_end;
+		if (tv_mode->progressive)
+			ysize = tv_mode->nbr_end + 1;
+		else
+			ysize = 2*tv_mode->nbr_end + 1;
+
+		xpos += intel_tv->margin[TV_MARGIN_LEFT];
+		ypos += intel_tv->margin[TV_MARGIN_TOP];
+		xsize -= (intel_tv->margin[TV_MARGIN_LEFT] +
+			  intel_tv->margin[TV_MARGIN_RIGHT]);
+		ysize -= (intel_tv->margin[TV_MARGIN_TOP] +
+			  intel_tv->margin[TV_MARGIN_BOTTOM]);
+		I915_WRITE(TV_WIN_POS, (xpos<<16)|ypos);
+		I915_WRITE(TV_WIN_SIZE, (xsize<<16)|ysize);
+
+		I915_WRITE(pipeconf_reg, pipeconf);
+		I915_WRITE(dspcntr_reg, dspcntr);
+		/* Flush the plane changes */
+		I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+	}
+
+	j = 0;
+	for (i = 0; i < 60; i++)
+		I915_WRITE(TV_H_LUMA_0 + (i<<2), tv_mode->filter_table[j++]);
+	for (i = 0; i < 60; i++)
+		I915_WRITE(TV_H_CHROMA_0 + (i<<2), tv_mode->filter_table[j++]);
+	for (i = 0; i < 43; i++)
+		I915_WRITE(TV_V_LUMA_0 + (i<<2), tv_mode->filter_table[j++]);
+	for (i = 0; i < 43; i++)
+		I915_WRITE(TV_V_CHROMA_0 + (i<<2), tv_mode->filter_table[j++]);
+	I915_WRITE(TV_DAC, I915_READ(TV_DAC) & TV_DAC_SAVE);
+	I915_WRITE(TV_CTL, tv_ctl);
+}
+
+static const struct drm_display_mode reported_modes[] = {
+	{
+		.name = "NTSC 480i",
+		.clock = 107520,
+		.hdisplay = 1280,
+		.hsync_start = 1368,
+		.hsync_end = 1496,
+		.htotal = 1712,
+
+		.vdisplay = 1024,
+		.vsync_start = 1027,
+		.vsync_end = 1034,
+		.vtotal = 1104,
+		.type = DRM_MODE_TYPE_DRIVER,
+	},
+};
+
+/**
+ * Detects TV presence by checking for load.
+ *
+ * Requires that the current pipe's DPLL is active.
+
+ * \return true if TV is connected.
+ * \return false if TV is disconnected.
+ */
+static int
+intel_tv_detect_type(struct intel_tv *intel_tv,
+		      struct drm_connector *connector)
+{
+	struct drm_encoder *encoder = &intel_tv->base.base;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long irqflags;
+	u32 tv_ctl, save_tv_ctl;
+	u32 tv_dac, save_tv_dac;
+	int type;
+
+	/* Disable TV interrupts around load detect or we'll recurse */
+	if (connector->polled & DRM_CONNECTOR_POLL_HPD) {
+		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+		i915_disable_pipestat(dev_priv, 0,
+				      PIPE_HOTPLUG_INTERRUPT_ENABLE |
+				      PIPE_HOTPLUG_TV_INTERRUPT_ENABLE);
+		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	}
+
+	save_tv_dac = tv_dac = I915_READ(TV_DAC);
+	save_tv_ctl = tv_ctl = I915_READ(TV_CTL);
+
+	/* Poll for TV detection */
+	tv_ctl &= ~(TV_ENC_ENABLE | TV_TEST_MODE_MASK);
+	tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
+	if (intel_crtc->pipe == 1)
+		tv_ctl |= TV_ENC_PIPEB_SELECT;
+	else
+		tv_ctl &= ~TV_ENC_PIPEB_SELECT;
+
+	tv_dac &= ~(TVDAC_SENSE_MASK | DAC_A_MASK | DAC_B_MASK | DAC_C_MASK);
+	tv_dac |= (TVDAC_STATE_CHG_EN |
+		   TVDAC_A_SENSE_CTL |
+		   TVDAC_B_SENSE_CTL |
+		   TVDAC_C_SENSE_CTL |
+		   DAC_CTL_OVERRIDE |
+		   DAC_A_0_7_V |
+		   DAC_B_0_7_V |
+		   DAC_C_0_7_V);
+
+	I915_WRITE(TV_CTL, tv_ctl);
+	I915_WRITE(TV_DAC, tv_dac);
+	POSTING_READ(TV_DAC);
+
+	intel_wait_for_vblank(intel_tv->base.base.dev,
+			      to_intel_crtc(intel_tv->base.base.crtc)->pipe);
+
+	type = -1;
+	tv_dac = I915_READ(TV_DAC);
+	DRM_DEBUG_KMS("TV detected: %x, %x\n", tv_ctl, tv_dac);
+	/*
+	 *  A B C
+	 *  0 1 1 Composite
+	 *  1 0 X svideo
+	 *  0 0 0 Component
+	 */
+	if ((tv_dac & TVDAC_SENSE_MASK) == (TVDAC_B_SENSE | TVDAC_C_SENSE)) {
+		DRM_DEBUG_KMS("Detected Composite TV connection\n");
+		type = DRM_MODE_CONNECTOR_Composite;
+	} else if ((tv_dac & (TVDAC_A_SENSE|TVDAC_B_SENSE)) == TVDAC_A_SENSE) {
+		DRM_DEBUG_KMS("Detected S-Video TV connection\n");
+		type = DRM_MODE_CONNECTOR_SVIDEO;
+	} else if ((tv_dac & TVDAC_SENSE_MASK) == 0) {
+		DRM_DEBUG_KMS("Detected Component TV connection\n");
+		type = DRM_MODE_CONNECTOR_Component;
+	} else {
+		DRM_DEBUG_KMS("Unrecognised TV connection\n");
+		type = -1;
+	}
+
+	I915_WRITE(TV_DAC, save_tv_dac & ~TVDAC_STATE_CHG_EN);
+	I915_WRITE(TV_CTL, save_tv_ctl);
+	POSTING_READ(TV_CTL);
+
+	/* For unknown reasons the hw barfs if we don't do this vblank wait. */
+	intel_wait_for_vblank(intel_tv->base.base.dev,
+			      to_intel_crtc(intel_tv->base.base.crtc)->pipe);
+
+	/* Restore interrupt config */
+	if (connector->polled & DRM_CONNECTOR_POLL_HPD) {
+		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+		i915_enable_pipestat(dev_priv, 0,
+				     PIPE_HOTPLUG_INTERRUPT_ENABLE |
+				     PIPE_HOTPLUG_TV_INTERRUPT_ENABLE);
+		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	}
+
+	return type;
+}
+
+/*
+ * Here we set accurate tv format according to connector type
+ * i.e Component TV should not be assigned by NTSC or PAL
+ */
+static void intel_tv_find_better_format(struct drm_connector *connector)
+{
+	struct intel_tv *intel_tv = intel_attached_tv(connector);
+	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
+	int i;
+
+	if ((intel_tv->type == DRM_MODE_CONNECTOR_Component) ==
+		tv_mode->component_only)
+		return;
+
+
+	for (i = 0; i < sizeof(tv_modes) / sizeof(*tv_modes); i++) {
+		tv_mode = tv_modes + i;
+
+		if ((intel_tv->type == DRM_MODE_CONNECTOR_Component) ==
+			tv_mode->component_only)
+			break;
+	}
+
+	intel_tv->tv_format = tv_mode->name;
+	drm_connector_property_set_value(connector,
+		connector->dev->mode_config.tv_mode_property, i);
+}
+
+/**
+ * Detect the TV connection.
+ *
+ * Currently this always returns CONNECTOR_STATUS_UNKNOWN, as we need to be sure
+ * we have a pipe programmed in order to probe the TV.
+ */
+static enum drm_connector_status
+intel_tv_detect(struct drm_connector *connector, bool force)
+{
+	struct drm_display_mode mode;
+	struct intel_tv *intel_tv = intel_attached_tv(connector);
+	int type;
+
+	mode = reported_modes[0];
+	drm_mode_set_crtcinfo(&mode, 0);
+
+	if (intel_tv->base.base.crtc && intel_tv->base.base.crtc->enabled) {
+		type = intel_tv_detect_type(intel_tv, connector);
+	} else if (force) {
+		struct intel_load_detect_pipe tmp;
+
+		if (intel_get_load_detect_pipe(&intel_tv->base, connector,
+					       &mode, &tmp)) {
+			type = intel_tv_detect_type(intel_tv, connector);
+			intel_release_load_detect_pipe(&intel_tv->base,
+						       connector,
+						       &tmp);
+		} else
+			return connector_status_unknown;
+	} else
+		return connector->status;
+
+	if (type < 0)
+		return connector_status_disconnected;
+
+	intel_tv->type = type;
+	intel_tv_find_better_format(connector);
+
+	return connector_status_connected;
+}
+
+static const struct input_res {
+	const char *name;
+	int w, h;
+} input_res_table[] = {
+	{"640x480", 640, 480},
+	{"800x600", 800, 600},
+	{"1024x768", 1024, 768},
+	{"1280x1024", 1280, 1024},
+	{"848x480", 848, 480},
+	{"1280x720", 1280, 720},
+	{"1920x1080", 1920, 1080},
+};
+
+/*
+ * Chose preferred mode  according to line number of TV format
+ */
+static void
+intel_tv_chose_preferred_modes(struct drm_connector *connector,
+			       struct drm_display_mode *mode_ptr)
+{
+	struct intel_tv *intel_tv = intel_attached_tv(connector);
+	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
+
+	if (tv_mode->nbr_end < 480 && mode_ptr->vdisplay == 480)
+		mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+	else if (tv_mode->nbr_end > 480) {
+		if (tv_mode->progressive == true && tv_mode->nbr_end < 720) {
+			if (mode_ptr->vdisplay == 720)
+				mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+		} else if (mode_ptr->vdisplay == 1080)
+				mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
+	}
+}
+
+/**
+ * Stub get_modes function.
+ *
+ * This should probably return a set of fixed modes, unless we can figure out
+ * how to probe modes off of TV connections.
+ */
+
+static int
+intel_tv_get_modes(struct drm_connector *connector)
+{
+	struct drm_display_mode *mode_ptr;
+	struct intel_tv *intel_tv = intel_attached_tv(connector);
+	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv);
+	int j, count = 0;
+	u64 tmp;
+
+	for (j = 0; j < ARRAY_SIZE(input_res_table);
+	     j++) {
+		const struct input_res *input = &input_res_table[j];
+		unsigned int hactive_s = input->w;
+		unsigned int vactive_s = input->h;
+
+		if (tv_mode->max_srcw && input->w > tv_mode->max_srcw)
+			continue;
+
+		if (input->w > 1024 && (!tv_mode->progressive
+					&& !tv_mode->component_only))
+			continue;
+
+		mode_ptr = drm_mode_create(connector->dev);
+		if (!mode_ptr)
+			continue;
+		strncpy(mode_ptr->name, input->name, DRM_DISPLAY_MODE_LEN);
+
+		mode_ptr->hdisplay = hactive_s;
+		mode_ptr->hsync_start = hactive_s + 1;
+		mode_ptr->hsync_end = hactive_s + 64;
+		if (mode_ptr->hsync_end <= mode_ptr->hsync_start)
+			mode_ptr->hsync_end = mode_ptr->hsync_start + 1;
+		mode_ptr->htotal = hactive_s + 96;
+
+		mode_ptr->vdisplay = vactive_s;
+		mode_ptr->vsync_start = vactive_s + 1;
+		mode_ptr->vsync_end = vactive_s + 32;
+		if (mode_ptr->vsync_end <= mode_ptr->vsync_start)
+			mode_ptr->vsync_end = mode_ptr->vsync_start  + 1;
+		mode_ptr->vtotal = vactive_s + 33;
+
+		tmp = (u64) tv_mode->refresh * mode_ptr->vtotal;
+		tmp *= mode_ptr->htotal;
+		tmp = div_u64(tmp, 1000000);
+		mode_ptr->clock = (int) tmp;
+
+		mode_ptr->type = DRM_MODE_TYPE_DRIVER;
+		intel_tv_chose_preferred_modes(connector, mode_ptr);
+		drm_mode_probed_add(connector, mode_ptr);
+		count++;
+	}
+
+	return count;
+}
+
+static void
+intel_tv_destroy(struct drm_connector *connector)
+{
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+
+static int
+intel_tv_set_property(struct drm_connector *connector, struct drm_property *property,
+		      uint64_t val)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_tv *intel_tv = intel_attached_tv(connector);
+	struct drm_crtc *crtc = intel_tv->base.base.crtc;
+	int ret = 0;
+	bool changed = false;
+
+	ret = drm_connector_property_set_value(connector, property, val);
+	if (ret < 0)
+		goto out;
+
+	if (property == dev->mode_config.tv_left_margin_property &&
+		intel_tv->margin[TV_MARGIN_LEFT] != val) {
+		intel_tv->margin[TV_MARGIN_LEFT] = val;
+		changed = true;
+	} else if (property == dev->mode_config.tv_right_margin_property &&
+		intel_tv->margin[TV_MARGIN_RIGHT] != val) {
+		intel_tv->margin[TV_MARGIN_RIGHT] = val;
+		changed = true;
+	} else if (property == dev->mode_config.tv_top_margin_property &&
+		intel_tv->margin[TV_MARGIN_TOP] != val) {
+		intel_tv->margin[TV_MARGIN_TOP] = val;
+		changed = true;
+	} else if (property == dev->mode_config.tv_bottom_margin_property &&
+		intel_tv->margin[TV_MARGIN_BOTTOM] != val) {
+		intel_tv->margin[TV_MARGIN_BOTTOM] = val;
+		changed = true;
+	} else if (property == dev->mode_config.tv_mode_property) {
+		if (val >= ARRAY_SIZE(tv_modes)) {
+			ret = -EINVAL;
+			goto out;
+		}
+		if (!strcmp(intel_tv->tv_format, tv_modes[val].name))
+			goto out;
+
+		intel_tv->tv_format = tv_modes[val].name;
+		changed = true;
+	} else {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (changed && crtc)
+		drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x,
+				crtc->y, crtc->fb);
+out:
+	return ret;
+}
+
+static const struct drm_encoder_helper_funcs intel_tv_helper_funcs = {
+	.dpms = intel_tv_dpms,
+	.mode_fixup = intel_tv_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.mode_set = intel_tv_mode_set,
+	.commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_tv_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = intel_tv_detect,
+	.destroy = intel_tv_destroy,
+	.set_property = intel_tv_set_property,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+};
+
+static const struct drm_connector_helper_funcs intel_tv_connector_helper_funcs = {
+	.mode_valid = intel_tv_mode_valid,
+	.get_modes = intel_tv_get_modes,
+	.best_encoder = intel_best_encoder,
+};
+
+static const struct drm_encoder_funcs intel_tv_enc_funcs = {
+	.destroy = intel_encoder_destroy,
+};
+
+/*
+ * Enumerate the child dev array parsed from VBT to check whether
+ * the integrated TV is present.
+ * If it is present, return 1.
+ * If it is not present, return false.
+ * If no child dev is parsed from VBT, it assumes that the TV is present.
+ */
+static int tv_is_present_in_vbt(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct child_device_config *p_child;
+	int i, ret;
+
+	if (!dev_priv->child_dev_num)
+		return 1;
+
+	ret = 0;
+	for (i = 0; i < dev_priv->child_dev_num; i++) {
+		p_child = dev_priv->child_dev + i;
+		/*
+		 * If the device type is not TV, continue.
+		 */
+		if (p_child->device_type != DEVICE_TYPE_INT_TV &&
+			p_child->device_type != DEVICE_TYPE_TV)
+			continue;
+		/* Only when the addin_offset is non-zero, it is regarded
+		 * as present.
+		 */
+		if (p_child->addin_offset) {
+			ret = 1;
+			break;
+		}
+	}
+	return ret;
+}
+
+void
+intel_tv_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_connector *connector;
+	struct intel_tv *intel_tv;
+	struct intel_encoder *intel_encoder;
+	struct intel_connector *intel_connector;
+	u32 tv_dac_on, tv_dac_off, save_tv_dac;
+	char *tv_format_names[ARRAY_SIZE(tv_modes)];
+	int i, initial_mode = 0;
+
+	if ((I915_READ(TV_CTL) & TV_FUSE_STATE_MASK) == TV_FUSE_STATE_DISABLED)
+		return;
+
+	if (!tv_is_present_in_vbt(dev)) {
+		DRM_DEBUG_KMS("Integrated TV is not present.\n");
+		return;
+	}
+	/* Even if we have an encoder we may not have a connector */
+	if (!dev_priv->int_tv_support)
+		return;
+
+	/*
+	 * Sanity check the TV output by checking to see if the
+	 * DAC register holds a value
+	 */
+	save_tv_dac = I915_READ(TV_DAC);
+
+	I915_WRITE(TV_DAC, save_tv_dac | TVDAC_STATE_CHG_EN);
+	tv_dac_on = I915_READ(TV_DAC);
+
+	I915_WRITE(TV_DAC, save_tv_dac & ~TVDAC_STATE_CHG_EN);
+	tv_dac_off = I915_READ(TV_DAC);
+
+	I915_WRITE(TV_DAC, save_tv_dac);
+
+	/*
+	 * If the register does not hold the state change enable
+	 * bit, (either as a 0 or a 1), assume it doesn't really
+	 * exist
+	 */
+	if ((tv_dac_on & TVDAC_STATE_CHG_EN) == 0 ||
+	    (tv_dac_off & TVDAC_STATE_CHG_EN) != 0)
+		return;
+
+	intel_tv = kzalloc(sizeof(struct intel_tv), GFP_KERNEL);
+	if (!intel_tv) {
+		return;
+	}
+
+	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
+	if (!intel_connector) {
+		kfree(intel_tv);
+		return;
+	}
+
+	intel_encoder = &intel_tv->base;
+	connector = &intel_connector->base;
+
+	/* The documentation, for the older chipsets at least, recommend
+	 * using a polling method rather than hotplug detection for TVs.
+	 * This is because in order to perform the hotplug detection, the PLLs
+	 * for the TV must be kept alive increasing power drain and starving
+	 * bandwidth from other encoders. Notably for instance, it causes
+	 * pipe underruns on Crestline when this encoder is supposedly idle.
+	 *
+	 * More recent chipsets favour HDMI rather than integrated S-Video.
+	 */
+	connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+
+	drm_connector_init(dev, connector, &intel_tv_connector_funcs,
+			   DRM_MODE_CONNECTOR_SVIDEO);
+
+	drm_encoder_init(dev, &intel_encoder->base, &intel_tv_enc_funcs,
+			 DRM_MODE_ENCODER_TVDAC);
+
+	intel_connector_attach_encoder(intel_connector, intel_encoder);
+	intel_encoder->type = INTEL_OUTPUT_TVOUT;
+	intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+	intel_encoder->clone_mask = (1 << INTEL_TV_CLONE_BIT);
+	intel_encoder->base.possible_crtcs = ((1 << 0) | (1 << 1));
+	intel_encoder->base.possible_clones = (1 << INTEL_OUTPUT_TVOUT);
+	intel_tv->type = DRM_MODE_CONNECTOR_Unknown;
+
+	/* BIOS margin values */
+	intel_tv->margin[TV_MARGIN_LEFT] = 54;
+	intel_tv->margin[TV_MARGIN_TOP] = 36;
+	intel_tv->margin[TV_MARGIN_RIGHT] = 46;
+	intel_tv->margin[TV_MARGIN_BOTTOM] = 37;
+
+	intel_tv->tv_format = tv_modes[initial_mode].name;
+
+	drm_encoder_helper_add(&intel_encoder->base, &intel_tv_helper_funcs);
+	drm_connector_helper_add(connector, &intel_tv_connector_helper_funcs);
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	/* Create TV properties then attach current values */
+	for (i = 0; i < ARRAY_SIZE(tv_modes); i++)
+		tv_format_names[i] = (char *)tv_modes[i].name;
+	drm_mode_create_tv_properties(dev,
+				      ARRAY_SIZE(tv_modes),
+				      tv_format_names);
+
+	drm_connector_attach_property(connector, dev->mode_config.tv_mode_property,
+				   initial_mode);
+	drm_connector_attach_property(connector,
+				   dev->mode_config.tv_left_margin_property,
+				   intel_tv->margin[TV_MARGIN_LEFT]);
+	drm_connector_attach_property(connector,
+				   dev->mode_config.tv_top_margin_property,
+				   intel_tv->margin[TV_MARGIN_TOP]);
+	drm_connector_attach_property(connector,
+				   dev->mode_config.tv_right_margin_property,
+				   intel_tv->margin[TV_MARGIN_RIGHT]);
+	drm_connector_attach_property(connector,
+				   dev->mode_config.tv_bottom_margin_property,
+				   intel_tv->margin[TV_MARGIN_BOTTOM]);
+	drm_sysfs_connector_add(connector);
+}