Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 624 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
new file mode 100644
index 00000000..90b9793f
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -0,0 +1,624 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "drm_edid.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+/* Here's the desired hotplug mode */
+#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 |		\
+			   ADPA_CRT_HOTPLUG_WARMUP_10MS |		\
+			   ADPA_CRT_HOTPLUG_SAMPLE_4S |			\
+			   ADPA_CRT_HOTPLUG_VOLTAGE_50 |		\
+			   ADPA_CRT_HOTPLUG_VOLREF_325MV |		\
+			   ADPA_CRT_HOTPLUG_ENABLE)
+
+struct intel_crt {
+	struct intel_encoder base;
+	bool force_hotplug_required;
+};
+
+static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
+{
+	return container_of(intel_attached_encoder(connector),
+			    struct intel_crt, base);
+}
+
+static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 temp, reg;
+
+	if (HAS_PCH_SPLIT(dev))
+		reg = PCH_ADPA;
+	else
+		reg = ADPA;
+
+	temp = I915_READ(reg);
+	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
+	temp &= ~ADPA_DAC_ENABLE;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		temp |= ADPA_DAC_ENABLE;
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_OFF:
+		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	}
+
+	I915_WRITE(reg, temp);
+}
+
+static int intel_crt_mode_valid(struct drm_connector *connector,
+				struct drm_display_mode *mode)
+{
+	struct drm_device *dev = connector->dev;
+
+	int max_clock = 0;
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	if (mode->clock < 25000)
+		return MODE_CLOCK_LOW;
+
+	if (IS_GEN2(dev))
+		max_clock = 350000;
+	else
+		max_clock = 400000;
+	if (mode->clock > max_clock)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
+				 struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static void intel_crt_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int dpll_md_reg;
+	u32 adpa, dpll_md;
+	u32 adpa_reg;
+
+	dpll_md_reg = DPLL_MD(intel_crtc->pipe);
+
+	if (HAS_PCH_SPLIT(dev))
+		adpa_reg = PCH_ADPA;
+	else
+		adpa_reg = ADPA;
+
+	/*
+	 * Disable separate mode multiplier used when cloning SDVO to CRT
+	 * XXX this needs to be adjusted when we really are cloning
+	 */
+	if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
+		dpll_md = I915_READ(dpll_md_reg);
+		I915_WRITE(dpll_md_reg,
+			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
+	}
+
+	adpa = ADPA_HOTPLUG_BITS;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
+
+	/* For CPT allow 3 pipe config, for others just use A or B */
+	if (HAS_PCH_CPT(dev))
+		adpa |= PORT_TRANS_SEL_CPT(intel_crtc->pipe);
+	else if (intel_crtc->pipe == 0)
+		adpa |= ADPA_PIPE_A_SELECT;
+	else
+		adpa |= ADPA_PIPE_B_SELECT;
+
+	if (!HAS_PCH_SPLIT(dev))
+		I915_WRITE(BCLRPAT(intel_crtc->pipe), 0);
+
+	I915_WRITE(adpa_reg, adpa);
+}
+
+static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 adpa;
+	bool ret;
+
+	/* The first time through, trigger an explicit detection cycle */
+	if (crt->force_hotplug_required) {
+		bool turn_off_dac = HAS_PCH_SPLIT(dev);
+		u32 save_adpa;
+
+		crt->force_hotplug_required = 0;
+
+		save_adpa = adpa = I915_READ(PCH_ADPA);
+		DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
+
+		adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
+		if (turn_off_dac)
+			adpa &= ~ADPA_DAC_ENABLE;
+
+		I915_WRITE(PCH_ADPA, adpa);
+
+		if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
+			     1000))
+			DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
+
+		if (turn_off_dac) {
+			I915_WRITE(PCH_ADPA, save_adpa);
+			POSTING_READ(PCH_ADPA);
+		}
+	}
+
+	/* Check the status to see if both blue and green are on now */
+	adpa = I915_READ(PCH_ADPA);
+	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
+		ret = true;
+	else
+		ret = false;
+	DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
+
+	return ret;
+}
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
+ *
+ * Not for i915G/i915GM
+ *
+ * \return true if CRT is connected.
+ * \return false if CRT is disconnected.
+ */
+static bool intel_crt_detect_hotplug(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 hotplug_en, orig, stat;
+	bool ret = false;
+	int i, tries = 0;
+
+	if (HAS_PCH_SPLIT(dev))
+		return intel_ironlake_crt_detect_hotplug(connector);
+
+	/*
+	 * On 4 series desktop, CRT detect sequence need to be done twice
+	 * to get a reliable result.
+	 */
+
+	if (IS_G4X(dev) && !IS_GM45(dev))
+		tries = 2;
+	else
+		tries = 1;
+	hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
+	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
+
+	for (i = 0; i < tries ; i++) {
+		/* turn on the FORCE_DETECT */
+		I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+		/* wait for FORCE_DETECT to go off */
+		if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
+			      CRT_HOTPLUG_FORCE_DETECT) == 0,
+			     1000))
+			DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
+	}
+
+	stat = I915_READ(PORT_HOTPLUG_STAT);
+	if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
+		ret = true;
+
+	/* clear the interrupt we just generated, if any */
+	I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
+
+	/* and put the bits back */
+	I915_WRITE(PORT_HOTPLUG_EN, orig);
+
+	return ret;
+}
+
+static bool intel_crt_detect_ddc(struct drm_connector *connector)
+{
+	struct intel_crt *crt = intel_attached_crt(connector);
+	struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
+
+	/* CRT should always be at 0, but check anyway */
+	if (crt->base.type != INTEL_OUTPUT_ANALOG)
+		return false;
+
+	if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
+		struct edid *edid;
+		bool is_digital = false;
+
+		edid = drm_get_edid(connector,
+			&dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+		/*
+		 * This may be a DVI-I connector with a shared DDC
+		 * link between analog and digital outputs, so we
+		 * have to check the EDID input spec of the attached device.
+		 *
+		 * On the other hand, what should we do if it is a broken EDID?
+		 */
+		if (edid != NULL) {
+			is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
+			connector->display_info.raw_edid = NULL;
+			kfree(edid);
+		}
+
+		if (!is_digital) {
+			DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
+			return true;
+		} else {
+			DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
+		}
+	}
+
+	return false;
+}
+
+static enum drm_connector_status
+intel_crt_load_detect(struct intel_crt *crt)
+{
+	struct drm_device *dev = crt->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t pipe = to_intel_crtc(crt->base.base.crtc)->pipe;
+	uint32_t save_bclrpat;
+	uint32_t save_vtotal;
+	uint32_t vtotal, vactive;
+	uint32_t vsample;
+	uint32_t vblank, vblank_start, vblank_end;
+	uint32_t dsl;
+	uint32_t bclrpat_reg;
+	uint32_t vtotal_reg;
+	uint32_t vblank_reg;
+	uint32_t vsync_reg;
+	uint32_t pipeconf_reg;
+	uint32_t pipe_dsl_reg;
+	uint8_t	st00;
+	enum drm_connector_status status;
+
+	DRM_DEBUG_KMS("starting load-detect on CRT\n");
+
+	bclrpat_reg = BCLRPAT(pipe);
+	vtotal_reg = VTOTAL(pipe);
+	vblank_reg = VBLANK(pipe);
+	vsync_reg = VSYNC(pipe);
+	pipeconf_reg = PIPECONF(pipe);
+	pipe_dsl_reg = PIPEDSL(pipe);
+
+	save_bclrpat = I915_READ(bclrpat_reg);
+	save_vtotal = I915_READ(vtotal_reg);
+	vblank = I915_READ(vblank_reg);
+
+	vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
+	vactive = (save_vtotal & 0x7ff) + 1;
+
+	vblank_start = (vblank & 0xfff) + 1;
+	vblank_end = ((vblank >> 16) & 0xfff) + 1;
+
+	/* Set the border color to purple. */
+	I915_WRITE(bclrpat_reg, 0x500050);
+
+	if (!IS_GEN2(dev)) {
+		uint32_t pipeconf = I915_READ(pipeconf_reg);
+		I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
+		POSTING_READ(pipeconf_reg);
+		/* Wait for next Vblank to substitue
+		 * border color for Color info */
+		intel_wait_for_vblank(dev, pipe);
+		st00 = I915_READ8(VGA_MSR_WRITE);
+		status = ((st00 & (1 << 4)) != 0) ?
+			connector_status_connected :
+			connector_status_disconnected;
+
+		I915_WRITE(pipeconf_reg, pipeconf);
+	} else {
+		bool restore_vblank = false;
+		int count, detect;
+
+		/*
+		* If there isn't any border, add some.
+		* Yes, this will flicker
+		*/
+		if (vblank_start <= vactive && vblank_end >= vtotal) {
+			uint32_t vsync = I915_READ(vsync_reg);
+			uint32_t vsync_start = (vsync & 0xffff) + 1;
+
+			vblank_start = vsync_start;
+			I915_WRITE(vblank_reg,
+				   (vblank_start - 1) |
+				   ((vblank_end - 1) << 16));
+			restore_vblank = true;
+		}
+		/* sample in the vertical border, selecting the larger one */
+		if (vblank_start - vactive >= vtotal - vblank_end)
+			vsample = (vblank_start + vactive) >> 1;
+		else
+			vsample = (vtotal + vblank_end) >> 1;
+
+		/*
+		 * Wait for the border to be displayed
+		 */
+		while (I915_READ(pipe_dsl_reg) >= vactive)
+			;
+		while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
+			;
+		/*
+		 * Watch ST00 for an entire scanline
+		 */
+		detect = 0;
+		count = 0;
+		do {
+			count++;
+			/* Read the ST00 VGA status register */
+			st00 = I915_READ8(VGA_MSR_WRITE);
+			if (st00 & (1 << 4))
+				detect++;
+		} while ((I915_READ(pipe_dsl_reg) == dsl));
+
+		/* restore vblank if necessary */
+		if (restore_vblank)
+			I915_WRITE(vblank_reg, vblank);
+		/*
+		 * If more than 3/4 of the scanline detected a monitor,
+		 * then it is assumed to be present. This works even on i830,
+		 * where there isn't any way to force the border color across
+		 * the screen
+		 */
+		status = detect * 4 > count * 3 ?
+			 connector_status_connected :
+			 connector_status_disconnected;
+	}
+
+	/* Restore previous settings */
+	I915_WRITE(bclrpat_reg, save_bclrpat);
+
+	return status;
+}
+
+static enum drm_connector_status
+intel_crt_detect(struct drm_connector *connector, bool force)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
+	enum drm_connector_status status;
+	struct intel_load_detect_pipe tmp;
+
+	if (I915_HAS_HOTPLUG(dev)) {
+		if (intel_crt_detect_hotplug(connector)) {
+			DRM_DEBUG_KMS("CRT detected via hotplug\n");
+			return connector_status_connected;
+		} else {
+			DRM_DEBUG_KMS("CRT not detected via hotplug\n");
+			return connector_status_disconnected;
+		}
+	}
+
+	if (intel_crt_detect_ddc(connector))
+		return connector_status_connected;
+
+	if (!force)
+		return connector->status;
+
+	/* for pre-945g platforms use load detect */
+	if (intel_get_load_detect_pipe(&crt->base, connector, NULL,
+				       &tmp)) {
+		if (intel_crt_detect_ddc(connector))
+			status = connector_status_connected;
+		else
+			status = intel_crt_load_detect(crt);
+		intel_release_load_detect_pipe(&crt->base, connector,
+					       &tmp);
+	} else
+		status = connector_status_unknown;
+
+	return status;
+}
+
+static void intel_crt_destroy(struct drm_connector *connector)
+{
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static int intel_crt_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = intel_ddc_get_modes(connector,
+				 &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+	if (ret || !IS_G4X(dev))
+		return ret;
+
+	/* Try to probe digital port for output in DVI-I -> VGA mode. */
+	return intel_ddc_get_modes(connector,
+				   &dev_priv->gmbus[GMBUS_PORT_DPB].adapter);
+}
+
+static int intel_crt_set_property(struct drm_connector *connector,
+				  struct drm_property *property,
+				  uint64_t value)
+{
+	return 0;
+}
+
+static void intel_crt_reset(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
+
+	if (HAS_PCH_SPLIT(dev))
+		crt->force_hotplug_required = 1;
+}
+
+/*
+ * Routines for controlling stuff on the analog port
+ */
+
+static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = {
+	.dpms = intel_crt_dpms,
+	.mode_fixup = intel_crt_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.commit = intel_encoder_commit,
+	.mode_set = intel_crt_mode_set,
+};
+
+static const struct drm_connector_funcs intel_crt_connector_funcs = {
+	.reset = intel_crt_reset,
+	.dpms = drm_helper_connector_dpms,
+	.detect = intel_crt_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = intel_crt_destroy,
+	.set_property = intel_crt_set_property,
+};
+
+static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
+	.mode_valid = intel_crt_mode_valid,
+	.get_modes = intel_crt_get_modes,
+	.best_encoder = intel_best_encoder,
+};
+
+static const struct drm_encoder_funcs intel_crt_enc_funcs = {
+	.destroy = intel_encoder_destroy,
+};
+
+static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident);
+	return 1;
+}
+
+static const struct dmi_system_id intel_no_crt[] = {
+	{
+		.callback = intel_no_crt_dmi_callback,
+		.ident = "ACER ZGB",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
+		},
+	},
+	{ }
+};
+
+void intel_crt_init(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+	struct intel_crt *crt;
+	struct intel_connector *intel_connector;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* Skip machines without VGA that falsely report hotplug events */
+	if (dmi_check_system(intel_no_crt))
+		return;
+
+	crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
+	if (!crt)
+		return;
+
+	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
+	if (!intel_connector) {
+		kfree(crt);
+		return;
+	}
+
+	connector = &intel_connector->base;
+	drm_connector_init(dev, &intel_connector->base,
+			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
+
+	drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
+			 DRM_MODE_ENCODER_DAC);
+
+	intel_connector_attach_encoder(intel_connector, &crt->base);
+
+	crt->base.type = INTEL_OUTPUT_ANALOG;
+	crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
+				1 << INTEL_ANALOG_CLONE_BIT |
+				1 << INTEL_SDVO_LVDS_CLONE_BIT);
+	crt->base.crtc_mask = (1 << 0) | (1 << 1);
+	if (IS_GEN2(dev))
+		connector->interlace_allowed = 0;
+	else
+		connector->interlace_allowed = 1;
+	connector->doublescan_allowed = 0;
+
+	drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs);
+	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
+
+	drm_sysfs_connector_add(connector);
+
+	if (I915_HAS_HOTPLUG(dev))
+		connector->polled = DRM_CONNECTOR_POLL_HPD;
+	else
+		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+
+	/*
+	 * Configure the automatic hotplug detection stuff
+	 */
+	crt->force_hotplug_required = 0;
+	if (HAS_PCH_SPLIT(dev)) {
+		u32 adpa;
+
+		adpa = I915_READ(PCH_ADPA);
+		adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+		adpa |= ADPA_HOTPLUG_BITS;
+		I915_WRITE(PCH_ADPA, adpa);
+		POSTING_READ(PCH_ADPA);
+
+		DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
+		crt->force_hotplug_required = 1;
+	}
+
+	dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
+}