dirty fix to merging

1 files changed, 180 insertions, 0 deletions

diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
new file mode 100644
index 00000000..69966ce4
--- /dev/null
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -0,0 +1,180 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
+ * Copyright (C) 2007 emQbit.com.
+ *
+ * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/cpu.h>
+
+#include "generic.h"
+
+
+static void __init ecb_at91init_early(void)
+{
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
+	/* Initialize processor: 18.432 MHz crystal */
+	at91_initialize(18432000);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx & Tx only) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static struct macb_platform_data __initdata ecb_at91eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 0,
+};
+
+static struct at91_usbh_data __initdata ecb_at91usbh_data = {
+	.ports		= 1,
+	.vbus_pin	= {-EINVAL, -EINVAL},
+	.overcurrent_pin= {-EINVAL, -EINVAL},
+};
+
+static struct at91_mmc_data __initdata ecb_at91mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+	.det_pin	= -EINVAL,
+	.wp_pin		= -EINVAL,
+	.vcc_pin	= -EINVAL,
+};
+
+
+#if defined(CONFIG_MTD_DATAFLASH)
+static struct mtd_partition __initdata my_flash0_partitions[] =
+{
+	{	/* 0x8400 */
+		.name	= "Darrell-loader",
+		.offset	= 0,
+		.size	= 12 * 1056,
+	},
+	{
+		.name	= "U-boot",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 110 * 1056,
+	},
+	{	/* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
+		.name	= "UBoot-env",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 8 * 1056,
+	},
+	{	/* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
+		.name	= "Kernel",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 1534 * 1056,
+	},
+	{	/* 190200 - jffs2 root filesystem */
+		.name	= "Filesystem",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,	/* 26 sectors */
+	}
+};
+
+static struct flash_platform_data __initdata my_flash0_platform = {
+	.name		= "Removable flash card",
+	.parts		= my_flash0_partitions,
+	.nr_parts	= ARRAY_SIZE(my_flash0_partitions)
+};
+
+#endif
+
+static struct spi_board_info __initdata ecb_at91spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 10 * 1000 * 1000,
+		.bus_num	= 0,
+#if defined(CONFIG_MTD_DATAFLASH)
+		.platform_data	= &my_flash0_platform,
+#endif
+	},
+	{	/* User accessible spi - cs1 (250KHz) */
+		.modalias	= "spi-cs1",
+		.chip_select	= 1,
+		.max_speed_hz	= 250 * 1000,
+	},
+	{	/* User accessible spi - cs2 (1MHz) */
+		.modalias	= "spi-cs2",
+		.chip_select	= 2,
+		.max_speed_hz	= 1 * 1000 * 1000,
+	},
+	{	/* User accessible spi - cs3 (10MHz) */
+		.modalias	= "spi-cs3",
+		.chip_select	= 3,
+		.max_speed_hz	= 10 * 1000 * 1000,
+	},
+};
+
+static void __init ecb_at91board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+
+	/* Ethernet */
+	at91_add_device_eth(&ecb_at91eth_data);
+
+	/* USB Host */
+	at91_add_device_usbh(&ecb_at91usbh_data);
+
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+
+	/* MMC */
+	at91_add_device_mmc(0, &ecb_at91mmc_data);
+
+	/* SPI */
+	at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
+}
+
+MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
+	/* Maintainer: emQbit.com */
+	.timer		= &at91rm9200_timer,
+	.map_io		= at91_map_io,
+	.init_early	= ecb_at91init_early,
+	.init_irq	= at91_init_irq_default,
+	.init_machine	= ecb_at91board_init,
+MACHINE_END