init android origin source code

1 files changed, 675 insertions, 0 deletions

diff --git a/ANDROID_3.4.5/include/linux/usb/hcd.h b/ANDROID_3.4.5/include/linux/usb/hcd.h
new file mode 100644
index 00000000..5de41570
--- /dev/null
+++ b/ANDROID_3.4.5/include/linux/usb/hcd.h
@@ -0,0 +1,675 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_HCD_H
+#define __USB_CORE_HCD_H
+
+#ifdef __KERNEL__
+
+#include <linux/rwsem.h>
+
+#define MAX_TOPO_LEVEL		6
+
+/* This file contains declarations of usbcore internals that are mostly
+ * used or exposed by Host Controller Drivers.
+ */
+
+/*
+ * USB Packet IDs (PIDs)
+ */
+#define USB_PID_EXT			0xf0	/* USB 2.0 LPM ECN */
+#define USB_PID_OUT			0xe1
+#define USB_PID_ACK			0xd2
+#define USB_PID_DATA0			0xc3
+#define USB_PID_PING			0xb4	/* USB 2.0 */
+#define USB_PID_SOF			0xa5
+#define USB_PID_NYET			0x96	/* USB 2.0 */
+#define USB_PID_DATA2			0x87	/* USB 2.0 */
+#define USB_PID_SPLIT			0x78	/* USB 2.0 */
+#define USB_PID_IN			0x69
+#define USB_PID_NAK			0x5a
+#define USB_PID_DATA1			0x4b
+#define USB_PID_PREAMBLE		0x3c	/* Token mode */
+#define USB_PID_ERR			0x3c	/* USB 2.0: handshake mode */
+#define USB_PID_SETUP			0x2d
+#define USB_PID_STALL			0x1e
+#define USB_PID_MDATA			0x0f	/* USB 2.0 */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * USB Host Controller Driver (usb_hcd) framework
+ *
+ * Since "struct usb_bus" is so thin, you can't share much code in it.
+ * This framework is a layer over that, and should be more sharable.
+ *
+ * @authorized_default: Specifies if new devices are authorized to
+ *                      connect by default or they require explicit
+ *                      user space authorization; this bit is settable
+ *                      through /sys/class/usb_host/X/authorized_default.
+ *                      For the rest is RO, so we don't lock to r/w it.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+struct usb_hcd {
+
+	/*
+	 * housekeeping
+	 */
+	struct usb_bus		self;		/* hcd is-a bus */
+	struct kref		kref;		/* reference counter */
+
+	const char		*product_desc;	/* product/vendor string */
+	int			speed;		/* Speed for this roothub.
+						 * May be different from
+						 * hcd->driver->flags & HCD_MASK
+						 */
+	char			irq_descr[24];	/* driver + bus # */
+
+	struct timer_list	rh_timer;	/* drives root-hub polling */
+	struct urb		*status_urb;	/* the current status urb */
+#ifdef CONFIG_USB_SUSPEND
+	struct work_struct	wakeup_work;	/* for remote wakeup */
+#endif
+
+	/*
+	 * hardware info/state
+	 */
+	const struct hc_driver	*driver;	/* hw-specific hooks */
+
+	/* Flags that need to be manipulated atomically because they can
+	 * change while the host controller is running.  Always use
+	 * set_bit() or clear_bit() to change their values.
+	 */
+	unsigned long		flags;
+#define HCD_FLAG_HW_ACCESSIBLE		0	/* at full power */
+#define HCD_FLAG_POLL_RH		2	/* poll for rh status? */
+#define HCD_FLAG_POLL_PENDING		3	/* status has changed? */
+#define HCD_FLAG_WAKEUP_PENDING		4	/* root hub is resuming? */
+#define HCD_FLAG_RH_RUNNING		5	/* root hub is running? */
+#define HCD_FLAG_DEAD			6	/* controller has died? */
+
+	/* The flags can be tested using these macros; they are likely to
+	 * be slightly faster than test_bit().
+	 */
+#define HCD_HW_ACCESSIBLE(hcd)	((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
+#define HCD_POLL_RH(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
+#define HCD_POLL_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
+#define HCD_WAKEUP_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
+#define HCD_RH_RUNNING(hcd)	((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
+#define HCD_DEAD(hcd)		((hcd)->flags & (1U << HCD_FLAG_DEAD))
+
+	/* Flags that get set only during HCD registration or removal. */
+	unsigned		rh_registered:1;/* is root hub registered? */
+	unsigned		rh_pollable:1;	/* may we poll the root hub? */
+	unsigned		msix_enabled:1;	/* driver has MSI-X enabled? */
+
+	/* The next flag is a stopgap, to be removed when all the HCDs
+	 * support the new root-hub polling mechanism. */
+	unsigned		uses_new_polling:1;
+	unsigned		wireless:1;	/* Wireless USB HCD */
+	unsigned		authorized_default:1;
+	unsigned		has_tt:1;	/* Integrated TT in root hub */
+
+	unsigned int		irq;		/* irq allocated */
+	void __iomem		*regs;		/* device memory/io */
+	u64			rsrc_start;	/* memory/io resource start */
+	u64			rsrc_len;	/* memory/io resource length */
+	unsigned		power_budget;	/* in mA, 0 = no limit */
+
+	/* bandwidth_mutex should be taken before adding or removing
+	 * any new bus bandwidth constraints:
+	 *   1. Before adding a configuration for a new device.
+	 *   2. Before removing the configuration to put the device into
+	 *      the addressed state.
+	 *   3. Before selecting a different configuration.
+	 *   4. Before selecting an alternate interface setting.
+	 *
+	 * bandwidth_mutex should be dropped after a successful control message
+	 * to the device, or resetting the bandwidth after a failed attempt.
+	 */
+	struct mutex		*bandwidth_mutex;
+	struct usb_hcd		*shared_hcd;
+	struct usb_hcd		*primary_hcd;
+
+
+#define HCD_BUFFER_POOLS	4
+	struct dma_pool		*pool[HCD_BUFFER_POOLS];
+
+	int			state;
+#	define	__ACTIVE		0x01
+#	define	__SUSPEND		0x04
+#	define	__TRANSIENT		0x80
+
+#	define	HC_STATE_HALT		0
+#	define	HC_STATE_RUNNING	(__ACTIVE)
+#	define	HC_STATE_QUIESCING	(__SUSPEND|__TRANSIENT|__ACTIVE)
+#	define	HC_STATE_RESUMING	(__SUSPEND|__TRANSIENT)
+#	define	HC_STATE_SUSPENDED	(__SUSPEND)
+
+#define	HC_IS_RUNNING(state) ((state) & __ACTIVE)
+#define	HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
+
+	/* more shared queuing code would be good; it should support
+	 * smarter scheduling, handle transaction translators, etc;
+	 * input size of periodic table to an interrupt scheduler.
+	 * (ohci 32, uhci 1024, ehci 256/512/1024).
+	 */
+
+	/* The HC driver's private data is stored at the end of
+	 * this structure.
+	 */
+	unsigned long hcd_priv[0]
+			__attribute__ ((aligned(sizeof(s64))));
+};
+
+/* 2.4 does this a bit differently ... */
+static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
+{
+	return &hcd->self;
+}
+
+static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
+{
+	return container_of(bus, struct usb_hcd, self);
+}
+
+struct hcd_timeout {	/* timeouts we allocate */
+	struct list_head	timeout_list;
+	struct timer_list	timer;
+};
+
+/*-------------------------------------------------------------------------*/
+
+
+struct hc_driver {
+	const char	*description;	/* "ehci-hcd" etc */
+	const char	*product_desc;	/* product/vendor string */
+	size_t		hcd_priv_size;	/* size of private data */
+
+	/* irq handler */
+	irqreturn_t	(*irq) (struct usb_hcd *hcd);
+
+	int	flags;
+#define	HCD_MEMORY	0x0001		/* HC regs use memory (else I/O) */
+#define	HCD_LOCAL_MEM	0x0002		/* HC needs local memory */
+#define	HCD_SHARED	0x0004		/* Two (or more) usb_hcds share HW */
+#define	HCD_USB11	0x0010		/* USB 1.1 */
+#define	HCD_USB2	0x0020		/* USB 2.0 */
+#define	HCD_USB3	0x0040		/* USB 3.0 */
+#define	HCD_MASK	0x0070
+
+	/* called to init HCD and root hub */
+	int	(*reset) (struct usb_hcd *hcd);
+	int	(*start) (struct usb_hcd *hcd);
+
+	/* NOTE:  these suspend/resume calls relate to the HC as
+	 * a whole, not just the root hub; they're for PCI bus glue.
+	 */
+	/* called after suspending the hub, before entering D3 etc */
+	int	(*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
+
+	/* called after entering D0 (etc), before resuming the hub */
+	int	(*pci_resume)(struct usb_hcd *hcd, bool hibernated);
+
+	/* cleanly make HCD stop writing memory and doing I/O */
+	void	(*stop) (struct usb_hcd *hcd);
+
+	/* shutdown HCD */
+	void	(*shutdown) (struct usb_hcd *hcd);
+
+	/* return current frame number */
+	int	(*get_frame_number) (struct usb_hcd *hcd);
+
+	/* manage i/o requests, device state */
+	int	(*urb_enqueue)(struct usb_hcd *hcd,
+				struct urb *urb, gfp_t mem_flags);
+	int	(*urb_dequeue)(struct usb_hcd *hcd,
+				struct urb *urb, int status);
+
+	/*
+	 * (optional) these hooks allow an HCD to override the default DMA
+	 * mapping and unmapping routines.  In general, they shouldn't be
+	 * necessary unless the host controller has special DMA requirements,
+	 * such as alignment contraints.  If these are not specified, the
+	 * general usb_hcd_(un)?map_urb_for_dma functions will be used instead
+	 * (and it may be a good idea to call these functions in your HCD
+	 * implementation)
+	 */
+	int	(*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
+				   gfp_t mem_flags);
+	void    (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
+
+	/* hw synch, freeing endpoint resources that urb_dequeue can't */
+	void	(*endpoint_disable)(struct usb_hcd *hcd,
+			struct usb_host_endpoint *ep);
+
+	/* (optional) reset any endpoint state such as sequence number
+	   and current window */
+	void	(*endpoint_reset)(struct usb_hcd *hcd,
+			struct usb_host_endpoint *ep);
+
+	/* root hub support */
+	int	(*hub_status_data) (struct usb_hcd *hcd, char *buf);
+	int	(*hub_control) (struct usb_hcd *hcd,
+				u16 typeReq, u16 wValue, u16 wIndex,
+				char *buf, u16 wLength);
+	int	(*bus_suspend)(struct usb_hcd *);
+	int	(*bus_resume)(struct usb_hcd *);
+	int	(*start_port_reset)(struct usb_hcd *, unsigned port_num);
+
+		/* force handover of high-speed port to full-speed companion */
+	void	(*relinquish_port)(struct usb_hcd *, int);
+		/* has a port been handed over to a companion? */
+	int	(*port_handed_over)(struct usb_hcd *, int);
+
+		/* CLEAR_TT_BUFFER completion callback */
+	void	(*clear_tt_buffer_complete)(struct usb_hcd *,
+				struct usb_host_endpoint *);
+
+	/* xHCI specific functions */
+		/* Called by usb_alloc_dev to alloc HC device structures */
+	int	(*alloc_dev)(struct usb_hcd *, struct usb_device *);
+		/* Called by usb_disconnect to free HC device structures */
+	void	(*free_dev)(struct usb_hcd *, struct usb_device *);
+	/* Change a group of bulk endpoints to support multiple stream IDs */
+	int	(*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags);
+	/* Reverts a group of bulk endpoints back to not using stream IDs.
+	 * Can fail if we run out of memory.
+	 */
+	int	(*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags);
+
+	/* Bandwidth computation functions */
+	/* Note that add_endpoint() can only be called once per endpoint before
+	 * check_bandwidth() or reset_bandwidth() must be called.
+	 * drop_endpoint() can only be called once per endpoint also.
+	 * A call to xhci_drop_endpoint() followed by a call to
+	 * xhci_add_endpoint() will add the endpoint to the schedule with
+	 * possibly new parameters denoted by a different endpoint descriptor
+	 * in usb_host_endpoint.  A call to xhci_add_endpoint() followed by a
+	 * call to xhci_drop_endpoint() is not allowed.
+	 */
+		/* Allocate endpoint resources and add them to a new schedule */
+	int	(*add_endpoint)(struct usb_hcd *, struct usb_device *,
+				struct usb_host_endpoint *);
+		/* Drop an endpoint from a new schedule */
+	int	(*drop_endpoint)(struct usb_hcd *, struct usb_device *,
+				 struct usb_host_endpoint *);
+		/* Check that a new hardware configuration, set using
+		 * endpoint_enable and endpoint_disable, does not exceed bus
+		 * bandwidth.  This must be called before any set configuration
+		 * or set interface requests are sent to the device.
+		 */
+	int	(*check_bandwidth)(struct usb_hcd *, struct usb_device *);
+		/* Reset the device schedule to the last known good schedule,
+		 * which was set from a previous successful call to
+		 * check_bandwidth().  This reverts any add_endpoint() and
+		 * drop_endpoint() calls since that last successful call.
+		 * Used for when a check_bandwidth() call fails due to resource
+		 * or bandwidth constraints.
+		 */
+	void	(*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
+		/* Returns the hardware-chosen device address */
+	int	(*address_device)(struct usb_hcd *, struct usb_device *udev);
+		/* Notifies the HCD after a hub descriptor is fetched.
+		 * Will block.
+		 */
+	int	(*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
+			struct usb_tt *tt, gfp_t mem_flags);
+	int	(*reset_device)(struct usb_hcd *, struct usb_device *);
+		/* Notifies the HCD after a device is connected and its
+		 * address is set
+		 */
+	int	(*update_device)(struct usb_hcd *, struct usb_device *);
+	int	(*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
+};
+
+extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
+extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+		int status);
+extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
+
+extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
+extern int usb_hcd_unlink_urb(struct urb *urb, int status);
+extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
+		int status);
+extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+		gfp_t mem_flags);
+extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
+extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
+extern void usb_hcd_flush_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep);
+extern void usb_hcd_disable_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep);
+extern void usb_hcd_reset_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep);
+extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
+extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
+		struct usb_host_config *new_config,
+		struct usb_host_interface *old_alt,
+		struct usb_host_interface *new_alt);
+extern int usb_hcd_get_frame_number(struct usb_device *udev);
+
+extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
+		struct device *dev, const char *bus_name);
+extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
+		struct device *dev, const char *bus_name,
+		struct usb_hcd *shared_hcd);
+extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
+extern void usb_put_hcd(struct usb_hcd *hcd);
+extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
+extern int usb_add_hcd(struct usb_hcd *hcd,
+		unsigned int irqnum, unsigned long irqflags);
+extern void usb_remove_hcd(struct usb_hcd *hcd);
+
+struct platform_device;
+extern void usb_hcd_platform_shutdown(struct platform_device *dev);
+
+#ifdef CONFIG_PCI
+struct pci_dev;
+struct pci_device_id;
+extern int usb_hcd_pci_probe(struct pci_dev *dev,
+				const struct pci_device_id *id);
+extern void usb_hcd_pci_remove(struct pci_dev *dev);
+extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
+
+#ifdef CONFIG_PM_SLEEP
+extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
+#endif
+#endif /* CONFIG_PCI */
+
+/* pci-ish (pdev null is ok) buffer alloc/mapping support */
+int hcd_buffer_create(struct usb_hcd *hcd);
+void hcd_buffer_destroy(struct usb_hcd *hcd);
+
+void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
+	gfp_t mem_flags, dma_addr_t *dma);
+void hcd_buffer_free(struct usb_bus *bus, size_t size,
+	void *addr, dma_addr_t dma);
+
+/* generic bus glue, needed for host controllers that don't use PCI */
+extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
+
+extern void usb_hc_died(struct usb_hcd *hcd);
+extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
+extern void usb_wakeup_notification(struct usb_device *hdev,
+		unsigned int portnum);
+
+/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+		((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+		 ((bit) << (ep)))
+
+/* -------------------------------------------------------------------------- */
+
+/* Enumeration is only for the hub driver, or HCD virtual root hubs */
+extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
+					struct usb_bus *, unsigned port);
+extern int usb_new_device(struct usb_device *dev);
+extern void usb_disconnect(struct usb_device **);
+
+extern int usb_get_configuration(struct usb_device *dev);
+extern void usb_destroy_configuration(struct usb_device *dev);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * HCD Root Hub support
+ */
+
+#include <linux/usb/ch11.h>
+
+/*
+ * As of USB 2.0, full/low speed devices are segregated into trees.
+ * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
+ * The other type grows from high speed hubs when they connect to
+ * full/low speed devices using "Transaction Translators" (TTs).
+ *
+ * TTs should only be known to the hub driver, and high speed bus
+ * drivers (only EHCI for now).  They affect periodic scheduling and
+ * sometimes control/bulk error recovery.
+ */
+
+struct usb_device;
+
+struct usb_tt {
+	struct usb_device	*hub;	/* upstream highspeed hub */
+	int			multi;	/* true means one TT per port */
+	unsigned		think_time;	/* think time in ns */
+
+	/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
+	spinlock_t		lock;
+	struct list_head	clear_list;	/* of usb_tt_clear */
+	struct work_struct	clear_work;
+};
+
+struct usb_tt_clear {
+	struct list_head	clear_list;
+	unsigned		tt;
+	u16			devinfo;
+	struct usb_hcd		*hcd;
+	struct usb_host_endpoint	*ep;
+};
+
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
+extern void usb_ep0_reinit(struct usb_device *);
+
+/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
+#define DeviceRequest \
+	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
+#define DeviceOutRequest \
+	((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
+
+#define InterfaceRequest \
+	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+
+#define EndpointRequest \
+	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+#define EndpointOutRequest \
+	((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+
+/* class requests from the USB 2.0 hub spec, table 11-15 */
+/* GetBusState and SetHubDescriptor are optional, omitted */
+#define ClearHubFeature		(0x2000 | USB_REQ_CLEAR_FEATURE)
+#define ClearPortFeature	(0x2300 | USB_REQ_CLEAR_FEATURE)
+#define GetHubDescriptor	(0xa000 | USB_REQ_GET_DESCRIPTOR)
+#define GetHubStatus		(0xa000 | USB_REQ_GET_STATUS)
+#define GetPortStatus		(0xa300 | USB_REQ_GET_STATUS)
+#define SetHubFeature		(0x2000 | USB_REQ_SET_FEATURE)
+#define SetPortFeature		(0x2300 | USB_REQ_SET_FEATURE)
+
+
+/*-------------------------------------------------------------------------*/
+
+/* class requests from USB 3.0 hub spec, table 10-5 */
+#define SetHubDepth		(0x3000 | HUB_SET_DEPTH)
+#define GetPortErrorCount	(0x8000 | HUB_GET_PORT_ERR_COUNT)
+
+/*
+ * Generic bandwidth allocation constants/support
+ */
+#define FRAME_TIME_USECS	1000L
+#define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
+		/* Trying not to use worst-case bit-stuffing
+		 * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
+		/* bytecount = data payload byte count */
+
+#define NS_TO_US(ns)	((ns + 500L) / 1000L)
+			/* convert & round nanoseconds to microseconds */
+
+
+/*
+ * Full/low speed bandwidth allocation constants/support.
+ */
+#define BW_HOST_DELAY	1000L		/* nanoseconds */
+#define BW_HUB_LS_SETUP	333L		/* nanoseconds */
+			/* 4 full-speed bit times (est.) */
+
+#define FRAME_TIME_BITS			12000L	/* frame = 1 millisecond */
+#define FRAME_TIME_MAX_BITS_ALLOC	(90L * FRAME_TIME_BITS / 100L)
+#define FRAME_TIME_MAX_USECS_ALLOC	(90L * FRAME_TIME_USECS / 100L)
+
+/*
+ * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
+ * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
+ * to preallocate bandwidth)
+ */
+#define USB2_HOST_DELAY	5	/* nsec, guess */
+#define HS_NSECS(bytes) (((55 * 8 * 2083) \
+	+ (2083UL * (3 + BitTime(bytes))))/1000 \
+	+ USB2_HOST_DELAY)
+#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
+	+ (2083UL * (3 + BitTime(bytes))))/1000 \
+	+ USB2_HOST_DELAY)
+#define HS_USECS(bytes)		NS_TO_US(HS_NSECS(bytes))
+#define HS_USECS_ISO(bytes)	NS_TO_US(HS_NSECS_ISO(bytes))
+
+extern long usb_calc_bus_time(int speed, int is_input,
+			int isoc, int bytecount);
+
+/*-------------------------------------------------------------------------*/
+
+extern void usb_set_device_state(struct usb_device *udev,
+		enum usb_device_state new_state);
+
+/*-------------------------------------------------------------------------*/
+
+/* exported only within usbcore */
+
+extern struct list_head usb_bus_list;
+extern struct mutex usb_bus_list_lock;
+extern wait_queue_head_t usb_kill_urb_queue;
+
+extern int usb_find_interface_driver(struct usb_device *dev,
+	struct usb_interface *interface);
+
+#define usb_endpoint_out(ep_dir)	(!((ep_dir) & USB_DIR_IN))
+
+#ifdef CONFIG_PM
+extern void usb_root_hub_lost_power(struct usb_device *rhdev);
+extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
+extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_USB_SUSPEND
+extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
+#else
+static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
+{
+	return;
+}
+#endif /* CONFIG_USB_SUSPEND */
+
+
+/*
+ * USB device fs stuff
+ */
+
+#ifdef CONFIG_USB_DEVICEFS
+
+/*
+ * these are expected to be called from the USB core/hub thread
+ * with the kernel lock held
+ */
+extern void usbfs_update_special(void);
+extern int usbfs_init(void);
+extern void usbfs_cleanup(void);
+
+#else /* CONFIG_USB_DEVICEFS */
+
+static inline void usbfs_update_special(void) {}
+static inline int usbfs_init(void) { return 0; }
+static inline void usbfs_cleanup(void) { }
+
+#endif /* CONFIG_USB_DEVICEFS */
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+
+struct usb_mon_operations {
+	void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
+	void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
+	void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
+	/* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
+};
+
+extern struct usb_mon_operations *mon_ops;
+
+static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
+{
+	if (bus->monitored)
+		(*mon_ops->urb_submit)(bus, urb);
+}
+
+static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
+    int error)
+{
+	if (bus->monitored)
+		(*mon_ops->urb_submit_error)(bus, urb, error);
+}
+
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+		int status)
+{
+	if (bus->monitored)
+		(*mon_ops->urb_complete)(bus, urb, status);
+}
+
+int usb_mon_register(struct usb_mon_operations *ops);
+void usb_mon_deregister(void);
+
+#else
+
+static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
+static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
+    int error) {}
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+		int status) {}
+
+#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
+
+/*-------------------------------------------------------------------------*/
+
+/* random stuff */
+
+#define	RUN_CONTEXT (in_irq() ? "in_irq" \
+		: (in_interrupt() ? "in_interrupt" : "can sleep"))
+
+
+/* This rwsem is for use only by the hub driver and ehci-hcd.
+ * Nobody else should touch it.
+ */
+extern struct rw_semaphore ehci_cf_port_reset_rwsem;
+
+/* Keep track of which host controller drivers are loaded */
+#define USB_UHCI_LOADED		0
+#define USB_OHCI_LOADED		1
+#define USB_EHCI_LOADED		2
+extern unsigned long usb_hcds_loaded;
+
+#endif /* __KERNEL__ */
+
+#endif /* __USB_CORE_HCD_H */