Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 225 deletions

diff --git a/ANDROID_3.4.5/include/linux/mfd/stmpe.h b/ANDROID_3.4.5/include/linux/mfd/stmpe.h
deleted file mode 100644
index 8516fd1e..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/stmpe.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- */
-
-#ifndef __LINUX_MFD_STMPE_H
-#define __LINUX_MFD_STMPE_H
-
-#include <linux/mutex.h>
-
-struct device;
-
-enum stmpe_block {
-	STMPE_BLOCK_GPIO	= 1 << 0,
-	STMPE_BLOCK_KEYPAD	= 1 << 1,
-	STMPE_BLOCK_TOUCHSCREEN	= 1 << 2,
-	STMPE_BLOCK_ADC		= 1 << 3,
-	STMPE_BLOCK_PWM		= 1 << 4,
-	STMPE_BLOCK_ROTATOR	= 1 << 5,
-};
-
-enum stmpe_partnum {
-	STMPE610,
-	STMPE801,
-	STMPE811,
-	STMPE1601,
-	STMPE2401,
-	STMPE2403,
-	STMPE_NBR_PARTS
-};
-
-/*
- * For registers whose locations differ on variants,  the correct address is
- * obtained by indexing stmpe->regs with one of the following.
- */
-enum {
-	STMPE_IDX_CHIP_ID,
-	STMPE_IDX_ICR_LSB,
-	STMPE_IDX_IER_LSB,
-	STMPE_IDX_ISR_MSB,
-	STMPE_IDX_GPMR_LSB,
-	STMPE_IDX_GPSR_LSB,
-	STMPE_IDX_GPCR_LSB,
-	STMPE_IDX_GPDR_LSB,
-	STMPE_IDX_GPEDR_MSB,
-	STMPE_IDX_GPRER_LSB,
-	STMPE_IDX_GPFER_LSB,
-	STMPE_IDX_GPAFR_U_MSB,
-	STMPE_IDX_IEGPIOR_LSB,
-	STMPE_IDX_ISGPIOR_MSB,
-	STMPE_IDX_MAX,
-};
-
-
-struct stmpe_variant_info;
-struct stmpe_client_info;
-
-/**
- * struct stmpe - STMPE MFD structure
- * @lock: lock protecting I/O operations
- * @irq_lock: IRQ bus lock
- * @dev: device, mostly for dev_dbg()
- * @client: client - i2c or spi
- * @ci: client specific information
- * @partnum: part number
- * @variant: the detected STMPE model number
- * @regs: list of addresses of registers which are at different addresses on
- *	  different variants.  Indexed by one of STMPE_IDX_*.
- * @irq: irq number for stmpe
- * @irq_base: starting IRQ number for internal IRQs
- * @num_gpios: number of gpios, differs for variants
- * @ier: cache of IER registers for bus_lock
- * @oldier: cache of IER registers for bus_lock
- * @pdata: platform data
- */
-struct stmpe {
-	struct mutex lock;
-	struct mutex irq_lock;
-	struct device *dev;
-	void *client;
-	struct stmpe_client_info *ci;
-	enum stmpe_partnum partnum;
-	struct stmpe_variant_info *variant;
-	const u8 *regs;
-
-	int irq;
-	int irq_base;
-	int num_gpios;
-	u8 ier[2];
-	u8 oldier[2];
-	struct stmpe_platform_data *pdata;
-};
-
-extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data);
-extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg);
-extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
-			    u8 *values);
-extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
-			     const u8 *values);
-extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val);
-extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
-			     enum stmpe_block block);
-extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
-extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
-
-struct matrix_keymap_data;
-
-/**
- * struct stmpe_keypad_platform_data - STMPE keypad platform data
- * @keymap_data: key map table and size
- * @debounce_ms: debounce interval, in ms.  Maximum is
- *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
- * @scan_count: number of key scanning cycles to confirm key data.
- *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
- * @no_autorepeat: disable key autorepeat
- */
-struct stmpe_keypad_platform_data {
-	struct matrix_keymap_data *keymap_data;
-	unsigned int debounce_ms;
-	unsigned int scan_count;
-	bool no_autorepeat;
-};
-
-#define STMPE_GPIO_NOREQ_811_TOUCH	(0xf0)
-
-/**
- * struct stmpe_gpio_platform_data - STMPE GPIO platform data
- * @gpio_base: first gpio number assigned.  A maximum of
- *	       %STMPE_NR_GPIOS GPIOs will be allocated.
- * @norequest_mask: bitmask specifying which GPIOs should _not_ be
- *		    requestable due to different usage (e.g. touch, keypad)
- *		    STMPE_GPIO_NOREQ_* macros can be used here.
- * @setup: board specific setup callback.
- * @remove: board specific remove callback
- */
-struct stmpe_gpio_platform_data {
-	int gpio_base;
-	unsigned norequest_mask;
-	void (*setup)(struct stmpe *stmpe, unsigned gpio_base);
-	void (*remove)(struct stmpe *stmpe, unsigned gpio_base);
-};
-
-/**
- * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
- * data
- * @sample_time: ADC converstion time in number of clock.
- * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
- * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
- * recommended is 4.
- * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
- * @ref_sel: ADC reference source
- * (0 -> internal reference, 1 -> external reference)
- * @adc_freq: ADC Clock speed
- * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
- * @ave_ctrl: Sample average control
- * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
- * @touch_det_delay: Touch detect interrupt delay
- * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
- * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
- * recommended is 3
- * @settling: Panel driver settling time
- * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
- * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
- * recommended is 2
- * @fraction_z: Length of the fractional part in z
- * (fraction_z ([0..7]) = Count of the fractional part)
- * recommended is 7
- * @i_drive: current limit value of the touchscreen drivers
- * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
- *
- * */
-struct stmpe_ts_platform_data {
-       u8 sample_time;
-       u8 mod_12b;
-       u8 ref_sel;
-       u8 adc_freq;
-       u8 ave_ctrl;
-       u8 touch_det_delay;
-       u8 settling;
-       u8 fraction_z;
-       u8 i_drive;
-};
-
-/**
- * struct stmpe_platform_data - STMPE platform data
- * @id: device id to distinguish between multiple STMPEs on the same board
- * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
- * @irq_trigger: IRQ trigger to use for the interrupt to the host
- * @irq_invert_polarity: IRQ line is connected with reversed polarity
- * @autosleep: bool to enable/disable stmpe autosleep
- * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
- * @irq_base: base IRQ number.  %STMPE_NR_IRQS irqs will be used, or
- *	      %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used.
- * @irq_over_gpio: true if gpio is used to get irq
- * @irq_gpio: gpio number over which irq will be requested (significant only if
- *	      irq_over_gpio is true)
- * @gpio: GPIO-specific platform data
- * @keypad: keypad-specific platform data
- * @ts: touchscreen-specific platform data
- */
-struct stmpe_platform_data {
-	int id;
-	unsigned int blocks;
-	int irq_base;
-	unsigned int irq_trigger;
-	bool irq_invert_polarity;
-	bool autosleep;
-	bool irq_over_gpio;
-	int irq_gpio;
-	int autosleep_timeout;
-
-	struct stmpe_gpio_platform_data *gpio;
-	struct stmpe_keypad_platform_data *keypad;
-	struct stmpe_ts_platform_data *ts;
-};
-
-#define STMPE_NR_INTERNAL_IRQS	9
-#define STMPE_INT_GPIO(x)	(STMPE_NR_INTERNAL_IRQS + (x))
-
-#define STMPE_NR_GPIOS		24
-#define STMPE_NR_IRQS		STMPE_INT_GPIO(STMPE_NR_GPIOS)
-
-#endif