Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 350 deletions

diff --git a/ANDROID_3.4.5/include/linux/init.h b/ANDROID_3.4.5/include/linux/init.h
deleted file mode 100644
index 6b951095..00000000
--- a/ANDROID_3.4.5/include/linux/init.h
+++ /dev/null
@@ -1,350 +0,0 @@
-#ifndef _LINUX_INIT_H
-#define _LINUX_INIT_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-/* These macros are used to mark some functions or 
- * initialized data (doesn't apply to uninitialized data)
- * as `initialization' functions. The kernel can take this
- * as hint that the function is used only during the initialization
- * phase and free up used memory resources after
- *
- * Usage:
- * For functions:
- * 
- * You should add __init immediately before the function name, like:
- *
- * static void __init initme(int x, int y)
- * {
- *    extern int z; z = x * y;
- * }
- *
- * If the function has a prototype somewhere, you can also add
- * __init between closing brace of the prototype and semicolon:
- *
- * extern int initialize_foobar_device(int, int, int) __init;
- *
- * For initialized data:
- * You should insert __initdata between the variable name and equal
- * sign followed by value, e.g.:
- *
- * static int init_variable __initdata = 0;
- * static const char linux_logo[] __initconst = { 0x32, 0x36, ... };
- *
- * Don't forget to initialize data not at file scope, i.e. within a function,
- * as gcc otherwise puts the data into the bss section and not into the init
- * section.
- * 
- * Also note, that this data cannot be "const".
- */
-
-/* These are for everybody (although not all archs will actually
-   discard it in modules) */
-#define __init		__section(.init.text) __cold notrace
-#define __initdata	__section(.init.data)
-#define __initconst	__section(.init.rodata)
-#define __exitdata	__section(.exit.data)
-#define __exit_call	__used __section(.exitcall.exit)
-
-/*
- * modpost check for section mismatches during the kernel build.
- * A section mismatch happens when there are references from a
- * code or data section to an init section (both code or data).
- * The init sections are (for most archs) discarded by the kernel
- * when early init has completed so all such references are potential bugs.
- * For exit sections the same issue exists.
- *
- * The following markers are used for the cases where the reference to
- * the *init / *exit section (code or data) is valid and will teach
- * modpost not to issue a warning.  Intended semantics is that a code or
- * data tagged __ref* can reference code or data from init section without
- * producing a warning (of course, no warning does not mean code is
- * correct, so optimally document why the __ref is needed and why it's OK).
- *
- * The markers follow same syntax rules as __init / __initdata.
- */
-#define __ref            __section(.ref.text) noinline
-#define __refdata        __section(.ref.data)
-#define __refconst       __section(.ref.rodata)
-
-/* compatibility defines */
-#define __init_refok     __ref
-#define __initdata_refok __refdata
-#define __exit_refok     __ref
-
-
-#ifdef MODULE
-#define __exitused
-#else
-#define __exitused  __used
-#endif
-
-#define __exit          __section(.exit.text) __exitused __cold notrace
-
-/* Used for HOTPLUG */
-#define __devinit        __section(.devinit.text) __cold notrace
-#define __devinitdata    __section(.devinit.data)
-#define __devinitconst   __section(.devinit.rodata)
-#define __devexit        __section(.devexit.text) __exitused __cold notrace
-#define __devexitdata    __section(.devexit.data)
-#define __devexitconst   __section(.devexit.rodata)
-
-/* Used for HOTPLUG_CPU */
-#define __cpuinit        __section(.cpuinit.text) __cold notrace
-#define __cpuinitdata    __section(.cpuinit.data)
-#define __cpuinitconst   __section(.cpuinit.rodata)
-#define __cpuexit        __section(.cpuexit.text) __exitused __cold notrace
-#define __cpuexitdata    __section(.cpuexit.data)
-#define __cpuexitconst   __section(.cpuexit.rodata)
-
-/* Used for MEMORY_HOTPLUG */
-#define __meminit        __section(.meminit.text) __cold notrace
-#define __meminitdata    __section(.meminit.data)
-#define __meminitconst   __section(.meminit.rodata)
-#define __memexit        __section(.memexit.text) __exitused __cold notrace
-#define __memexitdata    __section(.memexit.data)
-#define __memexitconst   __section(.memexit.rodata)
-
-/* For assembly routines */
-#define __HEAD		.section	".head.text","ax"
-#define __INIT		.section	".init.text","ax"
-#define __FINIT		.previous
-
-#define __INITDATA	.section	".init.data","aw",%progbits
-#define __INITRODATA	.section	".init.rodata","a",%progbits
-#define __FINITDATA	.previous
-
-#define __DEVINIT        .section	".devinit.text", "ax"
-#define __DEVINITDATA    .section	".devinit.data", "aw"
-#define __DEVINITRODATA  .section	".devinit.rodata", "a"
-
-#define __CPUINIT        .section	".cpuinit.text", "ax"
-#define __CPUINITDATA    .section	".cpuinit.data", "aw"
-#define __CPUINITRODATA  .section	".cpuinit.rodata", "a"
-
-#define __MEMINIT        .section	".meminit.text", "ax"
-#define __MEMINITDATA    .section	".meminit.data", "aw"
-#define __MEMINITRODATA  .section	".meminit.rodata", "a"
-
-/* silence warnings when references are OK */
-#define __REF            .section       ".ref.text", "ax"
-#define __REFDATA        .section       ".ref.data", "aw"
-#define __REFCONST       .section       ".ref.rodata", "a"
-
-#ifndef __ASSEMBLY__
-/*
- * Used for initialization calls..
- */
-typedef int (*initcall_t)(void);
-typedef void (*exitcall_t)(void);
-
-extern initcall_t __con_initcall_start[], __con_initcall_end[];
-extern initcall_t __security_initcall_start[], __security_initcall_end[];
-
-/* Used for contructor calls. */
-typedef void (*ctor_fn_t)(void);
-
-/* Defined in init/main.c */
-extern int do_one_initcall(initcall_t fn);
-extern char __initdata boot_command_line[];
-extern char *saved_command_line;
-extern unsigned int reset_devices;
-
-/* used by init/main.c */
-void setup_arch(char **);
-void prepare_namespace(void);
-
-extern void (*late_time_init)(void);
-
-extern bool initcall_debug;
-
-#endif
-  
-#ifndef MODULE
-
-#ifndef __ASSEMBLY__
-
-/* initcalls are now grouped by functionality into separate 
- * subsections. Ordering inside the subsections is determined
- * by link order. 
- * For backwards compatibility, initcall() puts the call in 
- * the device init subsection.
- *
- * The `id' arg to __define_initcall() is needed so that multiple initcalls
- * can point at the same handler without causing duplicate-symbol build errors.
- */
-
-#define __define_initcall(level,fn,id) \
-	static initcall_t __initcall_##fn##id __used \
-	__attribute__((__section__(".initcall" level ".init"))) = fn
-
-/*
- * Early initcalls run before initializing SMP.
- *
- * Only for built-in code, not modules.
- */
-#define early_initcall(fn)		__define_initcall("early",fn,early)
-
-/*
- * A "pure" initcall has no dependencies on anything else, and purely
- * initializes variables that couldn't be statically initialized.
- *
- * This only exists for built-in code, not for modules.
- */
-#define pure_initcall(fn)		__define_initcall("0",fn,0)
-
-#define core_initcall(fn)		__define_initcall("1",fn,1)
-#define core_initcall_sync(fn)		__define_initcall("1s",fn,1s)
-#define postcore_initcall(fn)		__define_initcall("2",fn,2)
-#define postcore_initcall_sync(fn)	__define_initcall("2s",fn,2s)
-#define arch_initcall(fn)		__define_initcall("3",fn,3)
-#define arch_initcall_sync(fn)		__define_initcall("3s",fn,3s)
-#define subsys_initcall(fn)		__define_initcall("4",fn,4)
-#define subsys_initcall_sync(fn)	__define_initcall("4s",fn,4s)
-#define fs_initcall(fn)			__define_initcall("5",fn,5)
-#define fs_initcall_sync(fn)		__define_initcall("5s",fn,5s)
-#define rootfs_initcall(fn)		__define_initcall("rootfs",fn,rootfs)
-#define device_initcall(fn)		__define_initcall("6",fn,6)
-#define device_initcall_sync(fn)	__define_initcall("6s",fn,6s)
-#define late_initcall(fn)		__define_initcall("7",fn,7)
-#define late_initcall_sync(fn)		__define_initcall("7s",fn,7s)
-
-#define __initcall(fn) device_initcall(fn)
-
-#define __exitcall(fn) \
-	static exitcall_t __exitcall_##fn __exit_call = fn
-
-#define console_initcall(fn) \
-	static initcall_t __initcall_##fn \
-	__used __section(.con_initcall.init) = fn
-
-#define security_initcall(fn) \
-	static initcall_t __initcall_##fn \
-	__used __section(.security_initcall.init) = fn
-
-struct obs_kernel_param {
-	const char *str;
-	int (*setup_func)(char *);
-	int early;
-};
-
-/*
- * Only for really core code.  See moduleparam.h for the normal way.
- *
- * Force the alignment so the compiler doesn't space elements of the
- * obs_kernel_param "array" too far apart in .init.setup.
- */
-#define __setup_param(str, unique_id, fn, early)			\
-	static const char __setup_str_##unique_id[] __initconst	\
-		__aligned(1) = str; \
-	static struct obs_kernel_param __setup_##unique_id	\
-		__used __section(.init.setup)			\
-		__attribute__((aligned((sizeof(long)))))	\
-		= { __setup_str_##unique_id, fn, early }
-
-#define __setup(str, fn)					\
-	__setup_param(str, fn, fn, 0)
-
-/* NOTE: fn is as per module_param, not __setup!  Emits warning if fn
- * returns non-zero. */
-#define early_param(str, fn)					\
-	__setup_param(str, fn, fn, 1)
-
-/* Relies on boot_command_line being set */
-void __init parse_early_param(void);
-void __init parse_early_options(char *cmdline);
-#endif /* __ASSEMBLY__ */
-
-/**
- * module_init() - driver initialization entry point
- * @x: function to be run at kernel boot time or module insertion
- * 
- * module_init() will either be called during do_initcalls() (if
- * builtin) or at module insertion time (if a module).  There can only
- * be one per module.
- */
-#define module_init(x)	__initcall(x);
-
-/**
- * module_exit() - driver exit entry point
- * @x: function to be run when driver is removed
- * 
- * module_exit() will wrap the driver clean-up code
- * with cleanup_module() when used with rmmod when
- * the driver is a module.  If the driver is statically
- * compiled into the kernel, module_exit() has no effect.
- * There can only be one per module.
- */
-#define module_exit(x)	__exitcall(x);
-
-#else /* MODULE */
-
-/* Don't use these in modules, but some people do... */
-#define early_initcall(fn)		module_init(fn)
-#define core_initcall(fn)		module_init(fn)
-#define postcore_initcall(fn)		module_init(fn)
-#define arch_initcall(fn)		module_init(fn)
-#define subsys_initcall(fn)		module_init(fn)
-#define fs_initcall(fn)			module_init(fn)
-#define device_initcall(fn)		module_init(fn)
-#define late_initcall(fn)		module_init(fn)
-
-#define security_initcall(fn)		module_init(fn)
-
-/* Each module must use one module_init(). */
-#define module_init(initfn)					\
-	static inline initcall_t __inittest(void)		\
-	{ return initfn; }					\
-	int init_module(void) __attribute__((alias(#initfn)));
-
-/* This is only required if you want to be unloadable. */
-#define module_exit(exitfn)					\
-	static inline exitcall_t __exittest(void)		\
-	{ return exitfn; }					\
-	void cleanup_module(void) __attribute__((alias(#exitfn)));
-
-#define __setup_param(str, unique_id, fn)	/* nothing */
-#define __setup(str, func) 			/* nothing */
-#endif
-
-/* Data marked not to be saved by software suspend */
-#define __nosavedata __section(.data..nosave)
-
-/* This means "can be init if no module support, otherwise module load
-   may call it." */
-#ifdef CONFIG_MODULES
-#define __init_or_module
-#define __initdata_or_module
-#define __initconst_or_module
-#define __INIT_OR_MODULE	.text
-#define __INITDATA_OR_MODULE	.data
-#define __INITRODATA_OR_MODULE	.section ".rodata","a",%progbits
-#else
-#define __init_or_module __init
-#define __initdata_or_module __initdata
-#define __initconst_or_module __initconst
-#define __INIT_OR_MODULE __INIT
-#define __INITDATA_OR_MODULE __INITDATA
-#define __INITRODATA_OR_MODULE __INITRODATA
-#endif /*CONFIG_MODULES*/
-
-/* Functions marked as __devexit may be discarded at kernel link time, depending
-   on config options.  Newer versions of binutils detect references from
-   retained sections to discarded sections and flag an error.  Pointers to
-   __devexit functions must use __devexit_p(function_name), the wrapper will
-   insert either the function_name or NULL, depending on the config options.
- */
-#if defined(MODULE) || defined(CONFIG_HOTPLUG)
-#define __devexit_p(x) x
-#else
-#define __devexit_p(x) NULL
-#endif
-
-#ifdef MODULE
-#define __exit_p(x) x
-#else
-#define __exit_p(x) NULL
-#endif
-
-#endif /* _LINUX_INIT_H */