Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 43 deletions

diff --git a/ANDROID_3.4.5/include/linux/atmel-pwm-bl.h b/ANDROID_3.4.5/include/linux/atmel-pwm-bl.h
deleted file mode 100644
index 0153a478..00000000
--- a/ANDROID_3.4.5/include/linux/atmel-pwm-bl.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2007 Atmel Corporation
- *
- * Driver for the AT32AP700X PS/2 controller (PSIF).
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __INCLUDE_ATMEL_PWM_BL_H
-#define __INCLUDE_ATMEL_PWM_BL_H
-
-/**
- * struct atmel_pwm_bl_platform_data
- * @pwm_channel: which PWM channel in the PWM module to use.
- * @pwm_frequency: PWM frequency to generate, the driver will try to be as
- *	close as the prescaler allows.
- * @pwm_compare_max: value to use in the PWM channel compare register.
- * @pwm_duty_max: maximum duty cycle value, must be less than or equal to
- *	pwm_compare_max.
- * @pwm_duty_min: minimum duty cycle value, must be less than pwm_duty_max.
- * @pwm_active_low: set to one if the low part of the PWM signal increases the
- *	brightness of the backlight.
- * @gpio_on: GPIO line to control the backlight on/off, set to -1 if not used.
- * @on_active_low: set to one if the on/off signal is on when GPIO is low.
- *
- * This struct must be added to the platform device in the board code. It is
- * used by the atmel-pwm-bl driver to setup the GPIO to control on/off and the
- * PWM device.
- */
-struct atmel_pwm_bl_platform_data {
-	unsigned int pwm_channel;
-	unsigned int pwm_frequency;
-	unsigned int pwm_compare_max;
-	unsigned int pwm_duty_max;
-	unsigned int pwm_duty_min;
-	unsigned int pwm_active_low;
-	int gpio_on;
-	unsigned int on_active_low;
-};
-
-#endif /* __INCLUDE_ATMEL_PWM_BL_H */