Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 435 deletions

diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-shared.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-shared.h
deleted file mode 100644
index b515d657..00000000
--- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-shared.h
+++ /dev/null
@@ -1,435 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-#ifndef __iwl_shared_h__
-#define __iwl_shared_h__
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/gfp.h>
-#include <net/mac80211.h>
-
-#include "iwl-commands.h"
-#include "iwl-fw.h"
-
-/**
- * DOC: shared area - role and goal
- *
- * The shared area contains all the data exported by the upper layer to the
- * other layers. Since the bus and transport layer shouldn't dereference
- * iwl_priv, all the data needed by the upper layer and the transport / bus
- * layer must be here.
- * The shared area also holds pointer to all the other layers. This allows a
- * layer to call a function from another layer.
- *
- * NOTE: All the layers hold a pointer to the shared area which must be shrd.
- *	A few macros assume that (_m)->shrd points to the shared area no matter
- *	what _m is.
- *
- * gets notifications about enumeration, suspend, resume.
- * For the moment, the bus layer is not a linux kernel module as itself, and
- * the module_init function of the driver must call the bus specific
- * registration functions. These functions are listed at the end of this file.
- * For the moment, there is only one implementation of this interface: PCI-e.
- * This implementation is iwl-pci.c
- */
-
-struct iwl_priv;
-struct iwl_trans;
-struct iwl_sensitivity_ranges;
-struct iwl_trans_ops;
-
-#define DRV_NAME        "iwlwifi"
-#define IWLWIFI_VERSION "in-tree:"
-#define DRV_COPYRIGHT	"Copyright(c) 2003-2012 Intel Corporation"
-#define DRV_AUTHOR     "<ilw@linux.intel.com>"
-
-extern struct iwl_mod_params iwlagn_mod_params;
-
-#define IWL_DISABLE_HT_ALL	BIT(0)
-#define IWL_DISABLE_HT_TXAGG	BIT(1)
-#define IWL_DISABLE_HT_RXAGG	BIT(2)
-
-/**
- * struct iwl_mod_params
- *
- * Holds the module parameters
- *
- * @sw_crypto: using hardware encryption, default = 0
- * @disable_11n: disable 11n capabilities, default = 0,
- *	use IWL_DISABLE_HT_* constants
- * @amsdu_size_8K: enable 8K amsdu size, default = 1
- * @antenna: both antennas (use diversity), default = 0
- * @restart_fw: restart firmware, default = 1
- * @plcp_check: enable plcp health check, default = true
- * @ack_check: disable ack health check, default = false
- * @wd_disable: enable stuck queue check, default = 0
- * @bt_coex_active: enable bt coex, default = true
- * @led_mode: system default, default = 0
- * @no_sleep_autoadjust: disable autoadjust, default = true
- * @power_save: disable power save, default = false
- * @power_level: power level, default = 1
- * @debug_level: levels are IWL_DL_*
- * @ant_coupling: antenna coupling in dB, default = 0
- * @bt_ch_announce: BT channel inhibition, default = enable
- * @wanted_ucode_alternative: ucode alternative to use, default = 1
- * @auto_agg: enable agg. without check, default = true
- */
-struct iwl_mod_params {
-	int sw_crypto;
-	unsigned int disable_11n;
-	int amsdu_size_8K;
-	int antenna;
-	int restart_fw;
-	bool plcp_check;
-	bool ack_check;
-	int  wd_disable;
-	bool bt_coex_active;
-	int led_mode;
-	bool no_sleep_autoadjust;
-	bool power_save;
-	int power_level;
-	u32 debug_level;
-	int ant_coupling;
-	bool bt_ch_announce;
-	int wanted_ucode_alternative;
-	bool auto_agg;
-};
-
-/**
- * struct iwl_hw_params
- *
- * Holds the module parameters
- *
- * @num_ampdu_queues: num of ampdu queues
- * @tx_chains_num: Number of TX chains
- * @rx_chains_num: Number of RX chains
- * @valid_tx_ant: usable antennas for TX
- * @valid_rx_ant: usable antennas for RX
- * @ht40_channel: is 40MHz width possible: BIT(IEEE80211_BAND_XXX)
- * @sku: sku read from EEPROM
- * @rx_page_order: Rx buffer page order
- * @ct_kill_threshold: temperature threshold - in hw dependent unit
- * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit
- *	relevant for 1000, 6000 and up
- * @wd_timeout: TX queues watchdog timeout
- * @struct iwl_sensitivity_ranges: range of sensitivity values
- * @use_rts_for_aggregation: use rts/cts protection for HT traffic
- */
-struct iwl_hw_params {
-	u8  num_ampdu_queues;
-	u8  tx_chains_num;
-	u8  rx_chains_num;
-	u8  valid_tx_ant;
-	u8  valid_rx_ant;
-	u8  ht40_channel;
-	bool use_rts_for_aggregation;
-	u16 sku;
-	u32 rx_page_order;
-	u32 ct_kill_threshold;
-	u32 ct_kill_exit_threshold;
-	unsigned int wd_timeout;
-
-	const struct iwl_sensitivity_ranges *sens;
-};
-
-/*
- * LED mode
- *    IWL_LED_DEFAULT:  use device default
- *    IWL_LED_RF_STATE: turn LED on/off based on RF state
- *			LED ON  = RF ON
- *			LED OFF = RF OFF
- *    IWL_LED_BLINK:    adjust led blink rate based on blink table
- *    IWL_LED_DISABLE:	led disabled
- */
-enum iwl_led_mode {
-	IWL_LED_DEFAULT,
-	IWL_LED_RF_STATE,
-	IWL_LED_BLINK,
-	IWL_LED_DISABLE,
-};
-
-/*
- * @max_ll_items: max number of OTP blocks
- * @shadow_ram_support: shadow support for OTP memory
- * @led_compensation: compensate on the led on/off time per HW according
- *	to the deviation to achieve the desired led frequency.
- *	The detail algorithm is described in iwl-led.c
- * @chain_noise_num_beacons: number of beacons used to compute chain noise
- * @adv_thermal_throttle: support advance thermal throttle
- * @support_ct_kill_exit: support ct kill exit condition
- * @support_wimax_coexist: support wimax/wifi co-exist
- * @plcp_delta_threshold: plcp error rate threshold used to trigger
- *	radio tuning when there is a high receiving plcp error rate
- * @chain_noise_scale: default chain noise scale used for gain computation
- * @wd_timeout: TX queues watchdog timeout
- * @max_event_log_size: size of event log buffer size for ucode event logging
- * @shadow_reg_enable: HW shadhow register bit
- * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
- * @no_idle_support: do not support idle mode
- * wd_disable: disable watchdog timer
- */
-struct iwl_base_params {
-	int eeprom_size;
-	int num_of_queues;	/* def: HW dependent */
-	int num_of_ampdu_queues;/* def: HW dependent */
-	/* for iwl_apm_init() */
-	u32 pll_cfg_val;
-
-	const u16 max_ll_items;
-	const bool shadow_ram_support;
-	u16 led_compensation;
-	bool adv_thermal_throttle;
-	bool support_ct_kill_exit;
-	const bool support_wimax_coexist;
-	u8 plcp_delta_threshold;
-	s32 chain_noise_scale;
-	unsigned int wd_timeout;
-	u32 max_event_log_size;
-	const bool shadow_reg_enable;
-	const bool hd_v2;
-	const bool no_idle_support;
-	const bool wd_disable;
-};
-
-/*
- * @advanced_bt_coexist: support advanced bt coexist
- * @bt_init_traffic_load: specify initial bt traffic load
- * @bt_prio_boost: default bt priority boost value
- * @agg_time_limit: maximum number of uSec in aggregation
- * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
- */
-struct iwl_bt_params {
-	bool advanced_bt_coexist;
-	u8 bt_init_traffic_load;
-	u8 bt_prio_boost;
-	u16 agg_time_limit;
-	bool bt_sco_disable;
-	bool bt_session_2;
-};
-/*
- * @use_rts_for_aggregation: use rts/cts protection for HT traffic
- */
-struct iwl_ht_params {
-	const bool ht_greenfield_support; /* if used set to true */
-	bool use_rts_for_aggregation;
-	enum ieee80211_smps_mode smps_mode;
-};
-
-/**
- * struct iwl_cfg
- * @name: Offical name of the device
- * @fw_name_pre: Firmware filename prefix. The api version and extension
- *	(.ucode) will be added to filename before loading from disk. The
- *	filename is constructed as fw_name_pre<api>.ucode.
- * @ucode_api_max: Highest version of uCode API supported by driver.
- * @ucode_api_ok: oldest version of the uCode API that is OK to load
- *	without a warning, for use in transitions
- * @ucode_api_min: Lowest version of uCode API supported by driver.
- * @max_inst_size: The maximal length of the fw inst section
- * @max_data_size: The maximal length of the fw data section
- * @valid_tx_ant: valid transmit antenna
- * @valid_rx_ant: valid receive antenna
- * @eeprom_ver: EEPROM version
- * @eeprom_calib_ver: EEPROM calibration version
- * @lib: pointer to the lib ops
- * @additional_nic_config: additional nic configuration
- * @base_params: pointer to basic parameters
- * @ht_params: point to ht patameters
- * @bt_params: pointer to bt parameters
- * @need_temp_offset_calib: need to perform temperature offset calibration
- * @no_xtal_calib: some devices do not need crystal calibration data,
- *	don't send it to those
- * @scan_rx_antennas: available antenna for scan operation
- * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
- * @adv_pm: advance power management
- * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
- * @internal_wimax_coex: internal wifi/wimax combo device
- * @iq_invert: I/Q inversion
- * @temp_offset_v2: support v2 of temperature offset calibration
- *
- * We enable the driver to be backward compatible wrt API version. The
- * driver specifies which APIs it supports (with @ucode_api_max being the
- * highest and @ucode_api_min the lowest). Firmware will only be loaded if
- * it has a supported API version.
- *
- * The ideal usage of this infrastructure is to treat a new ucode API
- * release as a new hardware revision.
- */
-struct iwl_cfg {
-	/* params specific to an individual device within a device family */
-	const char *name;
-	const char *fw_name_pre;
-	const unsigned int ucode_api_max;
-	const unsigned int ucode_api_ok;
-	const unsigned int ucode_api_min;
-	const u32 max_data_size;
-	const u32 max_inst_size;
-	u8   valid_tx_ant;
-	u8   valid_rx_ant;
-	u16  eeprom_ver;
-	u16  eeprom_calib_ver;
-	const struct iwl_lib_ops *lib;
-	void (*additional_nic_config)(struct iwl_priv *priv);
-	/* params not likely to change within a device family */
-	const struct iwl_base_params *base_params;
-	/* params likely to change within a device family */
-	const struct iwl_ht_params *ht_params;
-	const struct iwl_bt_params *bt_params;
-	const bool need_temp_offset_calib; /* if used set to true */
-	const bool no_xtal_calib;
-	u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
-	enum iwl_led_mode led_mode;
-	const bool adv_pm;
-	const bool rx_with_siso_diversity;
-	const bool internal_wimax_coex;
-	const bool iq_invert;
-	const bool temp_offset_v2;
-};
-
-/**
- * struct iwl_shared - shared fields for all the layers of the driver
- *
- * @status: STATUS_*
- * @wowlan: are we running wowlan uCode
- * @valid_contexts: microcode/device supports multiple contexts
- * @bus: pointer to the bus layer data
- * @cfg: see struct iwl_cfg
- * @priv: pointer to the upper layer data
- * @trans: pointer to the transport layer data
- * @nic: pointer to the nic data
- * @hw_params: see struct iwl_hw_params
- * @lock: protect general shared data
- * @eeprom: pointer to the eeprom/OTP image
- * @ucode_type: indicator of loaded ucode image
- * @device_pointers: pointers to ucode event tables
- */
-struct iwl_shared {
-	unsigned long status;
-	u8 valid_contexts;
-
-	const struct iwl_cfg *cfg;
-	struct iwl_trans *trans;
-	void *drv;
-	struct iwl_hw_params hw_params;
-	const struct iwl_fw *fw;
-
-	/* eeprom -- this is in the card's little endian byte order */
-	u8 *eeprom;
-
-	/* ucode related variables */
-	enum iwl_ucode_type ucode_type;
-
-	struct {
-		u32 error_event_table;
-		u32 log_event_table;
-	} device_pointers;
-
-};
-
-/*Whatever _m is (iwl_trans, iwl_priv, these macros will work */
-#define cfg(_m)		((_m)->shrd->cfg)
-#define trans(_m)	((_m)->shrd->trans)
-#define hw_params(_m)	((_m)->shrd->hw_params)
-
-static inline bool iwl_have_debug_level(u32 level)
-{
-	return iwlagn_mod_params.debug_level & level;
-}
-
-enum iwl_rxon_context_id {
-	IWL_RXON_CTX_BSS,
-	IWL_RXON_CTX_PAN,
-
-	NUM_IWL_RXON_CTX
-};
-
-int iwlagn_hw_valid_rtc_data_addr(u32 addr);
-const char *get_cmd_string(u8 cmd);
-
-#define IWL_CMD(x) case x: return #x
-
-/*****************************************************
-* DRIVER STATUS FUNCTIONS
-******************************************************/
-#define STATUS_HCMD_ACTIVE	0	/* host command in progress */
-/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
-#define STATUS_INT_ENABLED	2
-#define STATUS_RF_KILL_HW	3
-#define STATUS_CT_KILL		4
-#define STATUS_INIT		5
-#define STATUS_ALIVE		6
-#define STATUS_READY		7
-#define STATUS_TEMPERATURE	8
-#define STATUS_GEO_CONFIGURED	9
-#define STATUS_EXIT_PENDING	10
-#define STATUS_STATISTICS	12
-#define STATUS_SCANNING		13
-#define STATUS_SCAN_ABORTING	14
-#define STATUS_SCAN_HW		15
-#define STATUS_POWER_PMI	16
-#define STATUS_FW_ERROR		17
-#define STATUS_DEVICE_ENABLED	18
-#define STATUS_CHANNEL_SWITCH_PENDING 19
-#define STATUS_SCAN_COMPLETE	20
-
-#endif /* #__iwl_shared_h__ */