Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 1008 deletions

diff --git a/ANDROID_3.4.5/drivers/message/fusion/mptbase.h b/ANDROID_3.4.5/drivers/message/fusion/mptbase.h
deleted file mode 100644
index 76c05bc2..00000000
--- a/ANDROID_3.4.5/drivers/message/fusion/mptbase.h
+++ /dev/null
@@ -1,1008 +0,0 @@
-/*
- *  linux/drivers/message/fusion/mptbase.h
- *      High performance SCSI + LAN / Fibre Channel device drivers.
- *      For use with PCI chip/adapter(s):
- *          LSIFC9xx/LSI409xx Fibre Channel
- *      running LSI Fusion MPT (Message Passing Technology) firmware.
- *
- *  Copyright (c) 1999-2008 LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
- *
- */
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; version 2 of the License.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    NO WARRANTY
-    THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-    CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-    LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-    solely responsible for determining the appropriateness of using and
-    distributing the Program and assumes all risks associated with its
-    exercise of rights under this Agreement, including but not limited to
-    the risks and costs of program errors, damage to or loss of data,
-    programs or equipment, and unavailability or interruption of operations.
-
-    DISCLAIMER OF LIABILITY
-    NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-    DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-    TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-    USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-    HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#ifndef MPTBASE_H_INCLUDED
-#define MPTBASE_H_INCLUDED
-/*{-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/mutex.h>
-
-#include "lsi/mpi_type.h"
-#include "lsi/mpi.h"		/* Fusion MPI(nterface) basic defs */
-#include "lsi/mpi_ioc.h"	/* Fusion MPT IOC(ontroller) defs */
-#include "lsi/mpi_cnfg.h"	/* IOC configuration support */
-#include "lsi/mpi_init.h"	/* SCSI Host (initiator) protocol support */
-#include "lsi/mpi_lan.h"	/* LAN over FC protocol support */
-#include "lsi/mpi_raid.h"	/* Integrated Mirroring support */
-
-#include "lsi/mpi_fc.h"		/* Fibre Channel (lowlevel) support */
-#include "lsi/mpi_targ.h"	/* SCSI/FCP Target protcol support */
-#include "lsi/mpi_tool.h"	/* Tools support */
-#include "lsi/mpi_sas.h"	/* SAS support */
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
-#ifndef MODULEAUTHOR
-#define MODULEAUTHOR	"LSI Corporation"
-#endif
-
-#ifndef COPYRIGHT
-#define COPYRIGHT	"Copyright (c) 1999-2008 " MODULEAUTHOR
-#endif
-
-#define MPT_LINUX_VERSION_COMMON	"3.04.20"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.20"
-#define WHAT_MAGIC_STRING		"@" "(" "#" ")"
-
-#define show_mptmod_ver(s,ver)  \
-	printk(KERN_INFO "%s %s\n", s, ver);
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- *  Fusion MPT(linux) driver configurable stuff...
- */
-#define MPT_MAX_ADAPTERS		18
-#define MPT_MAX_PROTOCOL_DRIVERS	16
-#define MPT_MAX_CALLBACKNAME_LEN	49
-#define MPT_MAX_BUS			1	/* Do not change */
-#define MPT_MAX_FC_DEVICES		255
-#define MPT_MAX_SCSI_DEVICES		16
-#define MPT_LAST_LUN			255
-#define MPT_SENSE_BUFFER_ALLOC		64
-	/* allow for 256 max sense alloc, but only 255 max request */
-#if MPT_SENSE_BUFFER_ALLOC >= 256
-#	undef MPT_SENSE_BUFFER_ALLOC
-#	define MPT_SENSE_BUFFER_ALLOC	256
-#	define MPT_SENSE_BUFFER_SIZE	255
-#else
-#	define MPT_SENSE_BUFFER_SIZE	MPT_SENSE_BUFFER_ALLOC
-#endif
-
-#define MPT_NAME_LENGTH			32
-#define MPT_KOBJ_NAME_LEN		20
-
-#define MPT_PROCFS_MPTBASEDIR		"mpt"
-						/* chg it to "driver/fusion" ? */
-#define MPT_PROCFS_SUMMARY_ALL_NODE		MPT_PROCFS_MPTBASEDIR "/summary"
-#define MPT_PROCFS_SUMMARY_ALL_PATHNAME		"/proc/" MPT_PROCFS_SUMMARY_ALL_NODE
-#define MPT_FW_REV_MAGIC_ID_STRING		"FwRev="
-
-#define  MPT_MAX_REQ_DEPTH		1023
-#define  MPT_DEFAULT_REQ_DEPTH		256
-#define  MPT_MIN_REQ_DEPTH		128
-
-#define  MPT_MAX_REPLY_DEPTH		MPT_MAX_REQ_DEPTH
-#define  MPT_DEFAULT_REPLY_DEPTH	128
-#define  MPT_MIN_REPLY_DEPTH		8
-#define  MPT_MAX_REPLIES_PER_ISR	32
-
-#define  MPT_MAX_FRAME_SIZE		128
-#define  MPT_DEFAULT_FRAME_SIZE		128
-
-#define  MPT_REPLY_FRAME_SIZE		0x50  /* Must be a multiple of 8 */
-
-#define  MPT_SG_REQ_128_SCALE		1
-#define  MPT_SG_REQ_96_SCALE		2
-#define  MPT_SG_REQ_64_SCALE		4
-
-#define	 CAN_SLEEP			1
-#define  NO_SLEEP			0
-
-#define MPT_COALESCING_TIMEOUT		0x10
-
-
-/*
- * SCSI transfer rate defines.
- */
-#define MPT_ULTRA320			0x08
-#define MPT_ULTRA160			0x09
-#define MPT_ULTRA2			0x0A
-#define MPT_ULTRA			0x0C
-#define MPT_FAST			0x19
-#define MPT_SCSI			0x32
-#define MPT_ASYNC			0xFF
-
-#define MPT_NARROW			0
-#define MPT_WIDE			1
-
-#define C0_1030				0x08
-#define XL_929				0x01
-
-
-/*
- *	Try to keep these at 2^N-1
- */
-#define MPT_FC_CAN_QUEUE	1024
-#define MPT_SCSI_CAN_QUEUE	127
-#define MPT_SAS_CAN_QUEUE	127
-
-/*
- * Set the MAX_SGE value based on user input.
- */
-#ifdef CONFIG_FUSION_MAX_SGE
-#if CONFIG_FUSION_MAX_SGE  < 16
-#define MPT_SCSI_SG_DEPTH	16
-#elif CONFIG_FUSION_MAX_SGE  > 128
-#define MPT_SCSI_SG_DEPTH	128
-#else
-#define MPT_SCSI_SG_DEPTH	CONFIG_FUSION_MAX_SGE
-#endif
-#else
-#define MPT_SCSI_SG_DEPTH	40
-#endif
-
-#ifdef CONFIG_FUSION_MAX_FC_SGE
-#if CONFIG_FUSION_MAX_FC_SGE  < 16
-#define MPT_SCSI_FC_SG_DEPTH	16
-#elif CONFIG_FUSION_MAX_FC_SGE  > 256
-#define MPT_SCSI_FC_SG_DEPTH	256
-#else
-#define MPT_SCSI_FC_SG_DEPTH	CONFIG_FUSION_MAX_FC_SGE
-#endif
-#else
-#define MPT_SCSI_FC_SG_DEPTH	40
-#endif
-
-/* debug print string length used for events and iocstatus */
-# define EVENT_DESCR_STR_SZ             100
-
-#define MPT_POLLING_INTERVAL		1000	/* in milliseconds */
-
-#ifdef __KERNEL__	/* { */
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
-#include <linux/proc_fs.h>
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * Attempt semi-consistent error & warning msgs across
- * MPT drivers.  NOTE: Users of these macro defs must
- * themselves define their own MYNAM.
- */
-#define MYIOC_s_FMT			MYNAM ": %s: "
-#define MYIOC_s_DEBUG_FMT		KERN_DEBUG MYNAM ": %s: "
-#define MYIOC_s_INFO_FMT		KERN_INFO MYNAM ": %s: "
-#define MYIOC_s_NOTE_FMT		KERN_NOTICE MYNAM ": %s: "
-#define MYIOC_s_WARN_FMT		KERN_WARNING MYNAM ": %s: WARNING - "
-#define MYIOC_s_ERR_FMT			KERN_ERR MYNAM ": %s: ERROR - "
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- *  ATTO UL4D associated structures and defines
- */
-#define ATTOFLAG_DISC     0x0001
-#define ATTOFLAG_TAGGED   0x0002
-#define ATTOFLAG_WIDE_ENB 0x0008
-#define ATTOFLAG_ID_ENB   0x0010
-#define ATTOFLAG_LUN_ENB  0x0060
-
-typedef struct _ATTO_DEVICE_INFO
-{
-	u8	Offset;					/* 00h */
-	u8	Period;					/* 01h */
-	u16	ATTOFlags;				/* 02h */
-} ATTO_DEVICE_INFO, MPI_POINTER PTR_ATTO_DEVICE_INFO,
-  ATTODeviceInfo_t, MPI_POINTER pATTODeviceInfo_t;
-
-typedef struct _ATTO_CONFIG_PAGE_SCSI_PORT_2
-{
-	CONFIG_PAGE_HEADER	Header;			/* 00h */
-	u16			PortFlags;		/* 04h */
-	u16			Unused1;		/* 06h */
-	u32			Unused2;		/* 08h */
-	ATTO_DEVICE_INFO	DeviceSettings[16];	/* 0Ch */
-} fATTO_CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_ATTO_CONFIG_PAGE_SCSI_PORT_2,
-  ATTO_SCSIPortPage2_t, MPI_POINTER pATTO_SCSIPortPage2_t;
-
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- *  MPT protocol driver defs...
- */
-typedef enum {
-	MPTBASE_DRIVER,		/* MPT base class */
-	MPTCTL_DRIVER,		/* MPT ioctl class */
-	MPTSPI_DRIVER,		/* MPT SPI host class */
-	MPTFC_DRIVER,		/* MPT FC host class */
-	MPTSAS_DRIVER,		/* MPT SAS host class */
-	MPTLAN_DRIVER,		/* MPT LAN class */
-	MPTSTM_DRIVER,		/* MPT SCSI target mode class */
-	MPTUNKNOWN_DRIVER
-} MPT_DRIVER_CLASS;
-
-struct mpt_pci_driver{
-	int  (*probe) (struct pci_dev *dev, const struct pci_device_id *id);
-	void (*remove) (struct pci_dev *dev);
-};
-
-/*
- *  MPT adapter / port / bus / device info structures...
- */
-
-typedef union _MPT_FRAME_TRACKER {
-	struct {
-		struct list_head	list;
-		u32			 arg1;
-		u32			 pad;
-		void			*argp1;
-	} linkage;
-	/*
-	 * NOTE: When request frames are free, on the linkage structure
-	 * contets are valid.  All other values are invalid.
-	 * In particular, do NOT reply on offset [2]
-	 * (in words) being the * message context.
-	 * The message context must be reset (computed via base address
-	 * + an offset) prior to issuing any command.
-	 *
-	 * NOTE2: On non-32-bit systems, where pointers are LARGE,
-	 * using the linkage pointers destroys our sacred MsgContext
-	 * field contents.  But we don't care anymore because these
-	 * are now reset in mpt_put_msg_frame() just prior to sending
-	 * a request off to the IOC.
-	 */
-	struct {
-		u32 __hdr[2];
-		/*
-		 * The following _MUST_ match the location of the
-		 * MsgContext field in the MPT message headers.
-		 */
-		union {
-			u32		 MsgContext;
-			struct {
-				u16	 req_idx;	/* Request index */
-				u8	 cb_idx;	/* callback function index */
-				u8	 rsvd;
-			} fld;
-		} msgctxu;
-	} hwhdr;
-	/*
-	 * Remark: 32 bit identifier:
-	 *  31-24: reserved
-	 *  23-16: call back index
-	 *  15-0 : request index
-	 */
-} MPT_FRAME_TRACKER;
-
-/*
- *  We might want to view/access a frame as:
- *    1) generic request header
- *    2) SCSIIORequest
- *    3) SCSIIOReply
- *    4) MPIDefaultReply
- *    5) frame tracker
- */
-typedef struct _MPT_FRAME_HDR {
-	union {
-		MPIHeader_t		hdr;
-		SCSIIORequest_t		scsireq;
-		SCSIIOReply_t		sreply;
-		ConfigReply_t		configreply;
-		MPIDefaultReply_t	reply;
-		MPT_FRAME_TRACKER	frame;
-	} u;
-} MPT_FRAME_HDR;
-
-#define MPT_REQ_MSGFLAGS_DROPME		0x80
-
-typedef struct _MPT_SGL_HDR {
-	SGESimple32_t	 sge[1];
-} MPT_SGL_HDR;
-
-typedef struct _MPT_SGL64_HDR {
-	SGESimple64_t	 sge[1];
-} MPT_SGL64_HDR;
-
-/*
- *  System interface register set
- */
-
-typedef struct _SYSIF_REGS
-{
-	u32	Doorbell;	/* 00     System<->IOC Doorbell reg  */
-	u32	WriteSequence;	/* 04     Write Sequence register    */
-	u32	Diagnostic;	/* 08     Diagnostic register        */
-	u32	TestBase;	/* 0C     Test Base Address          */
-	u32	DiagRwData;	/* 10     Read Write Data (fw download)   */
-	u32	DiagRwAddress;	/* 14     Read Write Address (fw download)*/
-	u32	Reserved1[6];	/* 18-2F  reserved for future use    */
-	u32	IntStatus;	/* 30     Interrupt Status           */
-	u32	IntMask;	/* 34     Interrupt Mask             */
-	u32	Reserved2[2];	/* 38-3F  reserved for future use    */
-	u32	RequestFifo;	/* 40     Request Post/Free FIFO     */
-	u32	ReplyFifo;	/* 44     Reply   Post/Free FIFO     */
-	u32	RequestHiPriFifo; /* 48   Hi Priority Request FIFO   */
-	u32	Reserved3;	/* 4C-4F  reserved for future use    */
-	u32	HostIndex;	/* 50     Host Index register        */
-	u32	Reserved4[15];	/* 54-8F                             */
-	u32	Fubar;		/* 90     For Fubar usage            */
-	u32	Reserved5[1050];/* 94-10F8                           */
-	u32	Reset_1078;	/* 10FC   Reset 1078                 */
-} SYSIF_REGS;
-
-/*
- * NOTE: Use MPI_{DOORBELL,WRITESEQ,DIAG}_xxx defs in lsi/mpi.h
- * in conjunction with SYSIF_REGS accesses!
- */
-
-
-/*
- *	Dynamic Multi-Pathing specific stuff...
- */
-
-/* VirtTarget negoFlags field */
-#define MPT_TARGET_NO_NEGO_WIDE		0x01
-#define MPT_TARGET_NO_NEGO_SYNC		0x02
-#define MPT_TARGET_NO_NEGO_QAS		0x04
-#define MPT_TAPE_NEGO_IDP     		0x08
-
-/*
- *	VirtDevice - FC LUN device or SCSI target device
- */
-typedef struct _VirtTarget {
-	struct scsi_target	*starget;
-	u8			 tflags;
-	u8			 ioc_id;
-	u8			 id;
-	u8			 channel;
-	u8			 minSyncFactor;	/* 0xFF is async */
-	u8			 maxOffset;	/* 0 if async */
-	u8			 maxWidth;	/* 0 if narrow, 1 if wide */
-	u8			 negoFlags;	/* bit field, see above */
-	u8			 raidVolume;	/* set, if RAID Volume */
-	u8			 type;		/* byte 0 of Inquiry data */
-	u8			 deleted;	/* target in process of being removed */
-	u8			 inDMD;		/* currently in the device
-						   removal delay timer */
-	u32			 num_luns;
-} VirtTarget;
-
-typedef struct _VirtDevice {
-	VirtTarget		*vtarget;
-	u8			 configured_lun;
-	int			 lun;
-} VirtDevice;
-
-/*
- *  Fibre Channel (SCSI) target device and associated defines...
- */
-#define MPT_TARGET_DEFAULT_DV_STATUS	0x00
-#define MPT_TARGET_FLAGS_VALID_NEGO	0x01
-#define MPT_TARGET_FLAGS_VALID_INQUIRY	0x02
-#define MPT_TARGET_FLAGS_Q_YES		0x08
-#define MPT_TARGET_FLAGS_VALID_56	0x10
-#define MPT_TARGET_FLAGS_SAF_TE_ISSUED	0x20
-#define MPT_TARGET_FLAGS_RAID_COMPONENT	0x40
-#define MPT_TARGET_FLAGS_LED_ON		0x80
-
-/*
- *	IOCTL structure and associated defines
- */
-
-#define MPTCTL_RESET_OK			0x01	/* Issue Bus Reset */
-
-#define MPT_MGMT_STATUS_RF_VALID	0x01	/* The Reply Frame is VALID */
-#define MPT_MGMT_STATUS_COMMAND_GOOD	0x02	/* Command Status GOOD */
-#define MPT_MGMT_STATUS_PENDING		0x04	/* command is pending */
-#define MPT_MGMT_STATUS_DID_IOCRESET	0x08	/* IOC Reset occurred
-						   on the current*/
-#define MPT_MGMT_STATUS_SENSE_VALID	0x10	/* valid sense info */
-#define MPT_MGMT_STATUS_TIMER_ACTIVE	0x20	/* obsolete */
-#define MPT_MGMT_STATUS_FREE_MF		0x40	/* free the mf from
-						   complete routine */
-
-#define INITIALIZE_MGMT_STATUS(status) \
-	status = MPT_MGMT_STATUS_PENDING;
-#define CLEAR_MGMT_STATUS(status) \
-	status = 0;
-#define CLEAR_MGMT_PENDING_STATUS(status) \
-	status &= ~MPT_MGMT_STATUS_PENDING;
-#define SET_MGMT_MSG_CONTEXT(msg_context, value) \
-	msg_context = value;
-
-typedef struct _MPT_MGMT {
-	struct mutex		 mutex;
-	struct completion	 done;
-	u8			 reply[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */
-	u8			 sense[MPT_SENSE_BUFFER_ALLOC];
-	u8			 status;	/* current command status */
-	int			 completion_code;
-	u32			 msg_context;
-} MPT_MGMT;
-
-/*
- *  Event Structure and define
- */
-#define MPTCTL_EVENT_LOG_SIZE		(0x000000032)
-typedef struct _mpt_ioctl_events {
-	u32	event;		/* Specified by define above */
-	u32	eventContext;	/* Index or counter */
-	u32	data[2];	/* First 8 bytes of Event Data */
-} MPT_IOCTL_EVENTS;
-
-/*
- * CONFIGPARM status  defines
- */
-#define MPT_CONFIG_GOOD		MPI_IOCSTATUS_SUCCESS
-#define MPT_CONFIG_ERROR	0x002F
-
-/*
- *	Substructure to store SCSI specific configuration page data
- */
-						/* dvStatus defines: */
-#define MPT_SCSICFG_USE_NVRAM		0x01	/* WriteSDP1 using NVRAM */
-#define MPT_SCSICFG_ALL_IDS		0x02	/* WriteSDP1 to all IDS */
-/* #define MPT_SCSICFG_BLK_NEGO		0x10	   WriteSDP1 with WDTR and SDTR disabled */
-
-typedef	struct _SpiCfgData {
-	u32		 PortFlags;
-	int		*nvram;			/* table of device NVRAM values */
-	IOCPage4_t	*pIocPg4;		/* SEP devices addressing */
-	dma_addr_t	 IocPg4_dma;		/* Phys Addr of IOCPage4 data */
-	int		 IocPg4Sz;		/* IOCPage4 size */
-	u8		 minSyncFactor;		/* 0xFF if async */
-	u8		 maxSyncOffset;		/* 0 if async */
-	u8		 maxBusWidth;		/* 0 if narrow, 1 if wide */
-	u8		 busType;		/* SE, LVD, HD */
-	u8		 sdp1version;		/* SDP1 version */
-	u8		 sdp1length;		/* SDP1 length  */
-	u8		 sdp0version;		/* SDP0 version */
-	u8		 sdp0length;		/* SDP0 length  */
-	u8		 dvScheduled;		/* 1 if scheduled */
-	u8		 noQas;			/* Disable QAS for this adapter */
-	u8		 Saf_Te;		/* 1 to force all Processors as
-						 * SAF-TE if Inquiry data length
-						 * is too short to check for SAF-TE
-						 */
-	u8		 bus_reset;		/* 1 to allow bus reset */
-	u8		 rsvd[1];
-}SpiCfgData;
-
-typedef	struct _SasCfgData {
-	u8		 ptClear;		/* 1 to automatically clear the
-						 * persistent table.
-						 * 0 to disable
-						 * automatic clearing.
-						 */
-}SasCfgData;
-
-/*
- * Inactive volume link list of raid component data
- * @inactive_list
- */
-struct inactive_raid_component_info {
-	struct 	 list_head list;
-	u8		 volumeID;		/* volume target id */
-	u8		 volumeBus;		/* volume channel */
-	IOC_3_PHYS_DISK	 d;			/* phys disk info */
-};
-
-typedef	struct _RaidCfgData {
-	IOCPage2_t	*pIocPg2;		/* table of Raid Volumes */
-	IOCPage3_t	*pIocPg3;		/* table of physical disks */
-	struct mutex	inactive_list_mutex;
-	struct list_head	inactive_list; /* link list for physical
-						disk that belong in
-						inactive volumes */
-}RaidCfgData;
-
-typedef struct _FcCfgData {
-	/* will ultimately hold fc_port_page0 also */
-	struct {
-		FCPortPage1_t	*data;
-		dma_addr_t	 dma;
-		int		 pg_sz;
-	}			 fc_port_page1[2];
-} FcCfgData;
-
-#define MPT_RPORT_INFO_FLAGS_REGISTERED	0x01	/* rport registered */
-#define MPT_RPORT_INFO_FLAGS_MISSING	0x02	/* missing from DevPage0 scan */
-
-/*
- * data allocated for each fc rport device
- */
-struct mptfc_rport_info
-{
-	struct list_head list;
-	struct fc_rport *rport;
-	struct scsi_target *starget;
-	FCDevicePage0_t pg0;
-	u8		flags;
-};
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
-/*
- * MPT_SCSI_HOST defines - Used by the IOCTL and the SCSI drivers
- * Private to the driver.
- */
-
-#define MPT_HOST_BUS_UNKNOWN		(0xFF)
-#define MPT_HOST_TOO_MANY_TM		(0x05)
-#define MPT_HOST_NVRAM_INVALID		(0xFFFFFFFF)
-#define MPT_HOST_NO_CHAIN		(0xFFFFFFFF)
-#define MPT_NVRAM_MASK_TIMEOUT		(0x000000FF)
-#define MPT_NVRAM_SYNC_MASK		(0x0000FF00)
-#define MPT_NVRAM_SYNC_SHIFT		(8)
-#define MPT_NVRAM_DISCONNECT_ENABLE	(0x00010000)
-#define MPT_NVRAM_ID_SCAN_ENABLE	(0x00020000)
-#define MPT_NVRAM_LUN_SCAN_ENABLE	(0x00040000)
-#define MPT_NVRAM_TAG_QUEUE_ENABLE	(0x00080000)
-#define MPT_NVRAM_WIDE_DISABLE		(0x00100000)
-#define MPT_NVRAM_BOOT_CHOICE		(0x00200000)
-
-typedef enum {
-	FC,
-	SPI,
-	SAS
-} BUS_TYPE;
-
-typedef struct _MPT_SCSI_HOST {
-	struct _MPT_ADAPTER		 *ioc;
-	ushort			  sel_timeout[MPT_MAX_FC_DEVICES];
-	char			  *info_kbuf;
-	long			  last_queue_full;
-	u16			  spi_pending;
-	struct list_head	  target_reset_list;
-} MPT_SCSI_HOST;
-
-typedef void (*MPT_ADD_SGE)(void *pAddr, u32 flagslength, dma_addr_t dma_addr);
-typedef void (*MPT_ADD_CHAIN)(void *pAddr, u8 next, u16 length,
-		dma_addr_t dma_addr);
-typedef void (*MPT_SCHEDULE_TARGET_RESET)(void *ioc);
-typedef void (*MPT_FLUSH_RUNNING_CMDS)(MPT_SCSI_HOST *hd);
-
-/*
- *  Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS
- */
-typedef struct _MPT_ADAPTER
-{
-	int			 id;		/* Unique adapter id N {0,1,2,...} */
-	int			 pci_irq;	/* This irq           */
-	char			 name[MPT_NAME_LENGTH];	/* "iocN"             */
-	char			 prod_name[MPT_NAME_LENGTH];	/* "LSIFC9x9"         */
-#ifdef CONFIG_FUSION_LOGGING
-	/* used in mpt_display_event_info */
-	char			 evStr[EVENT_DESCR_STR_SZ];
-#endif
-	char			 board_name[16];
-	char			 board_assembly[16];
-	char			 board_tracer[16];
-	u16			 nvdata_version_persistent;
-	u16			 nvdata_version_default;
-	int			 debug_level;
-	u8			 io_missing_delay;
-	u16			 device_missing_delay;
-	SYSIF_REGS __iomem	*chip;		/* == c8817000 (mmap) */
-	SYSIF_REGS __iomem	*pio_chip;	/* Programmed IO (downloadboot) */
-	u8			 bus_type;
-	u32			 mem_phys;	/* == f4020000 (mmap) */
-	u32			 pio_mem_phys;	/* Programmed IO (downloadboot) */
-	int			 mem_size;	/* mmap memory size */
-	int			 number_of_buses;
-	int			 devices_per_bus;
-	int			 alloc_total;
-	u32			 last_state;
-	int			 active;
-	u8			*alloc;		/* frames alloc ptr */
-	dma_addr_t		 alloc_dma;
-	u32			 alloc_sz;
-	MPT_FRAME_HDR		*reply_frames;	/* Reply msg frames - rounded up! */
-	u32			 reply_frames_low_dma;
-	int			 reply_depth;	/* Num Allocated reply frames */
-	int			 reply_sz;	/* Reply frame size */
-	int			 num_chain;	/* Number of chain buffers */
-	MPT_ADD_SGE              add_sge;       /* Pointer to add_sge
-						   function */
-	MPT_ADD_CHAIN		 add_chain;	/* Pointer to add_chain
-						   function */
-		/* Pool of buffers for chaining. ReqToChain
-		 * and ChainToChain track index of chain buffers.
-		 * ChainBuffer (DMA) virt/phys addresses.
-		 * FreeChainQ (lock) locking mechanisms.
-		 */
-	int			*ReqToChain;
-	int			*RequestNB;
-	int			*ChainToChain;
-	u8			*ChainBuffer;
-	dma_addr_t		 ChainBufferDMA;
-	struct list_head	 FreeChainQ;
-	spinlock_t		 FreeChainQlock;
-		/* We (host driver) get to manage our own RequestQueue! */
-	dma_addr_t		 req_frames_dma;
-	MPT_FRAME_HDR		*req_frames;	/* Request msg frames - rounded up! */
-	u32			 req_frames_low_dma;
-	int			 req_depth;	/* Number of request frames */
-	int			 req_sz;	/* Request frame size (bytes) */
-	spinlock_t		 FreeQlock;
-	struct list_head	 FreeQ;
-		/* Pool of SCSI sense buffers for commands coming from
-		 * the SCSI mid-layer.  We have one 256 byte sense buffer
-		 * for each REQ entry.
-		 */
-	u8			*sense_buf_pool;
-	dma_addr_t		 sense_buf_pool_dma;
-	u32			 sense_buf_low_dma;
-	u8			*HostPageBuffer; /* SAS - host page buffer support */
-	u32			HostPageBuffer_sz;
-	dma_addr_t		HostPageBuffer_dma;
-	int			 mtrr_reg;
-	struct pci_dev		*pcidev;	/* struct pci_dev pointer */
-	int			bars;		/* bitmask of BAR's that must be configured */
-	int			msi_enable;
-	u8			__iomem *memmap;	/* mmap address */
-	struct Scsi_Host	*sh;		/* Scsi Host pointer */
-	SpiCfgData		spi_data;	/* Scsi config. data */
-	RaidCfgData		raid_data;	/* Raid config. data */
-	SasCfgData		sas_data;	/* Sas config. data */
-	FcCfgData		fc_data;	/* Fc config. data */
-	struct proc_dir_entry	*ioc_dentry;
-	struct _MPT_ADAPTER	*alt_ioc;	/* ptr to 929 bound adapter port */
-	u32			 biosVersion;	/* BIOS version from IO Unit Page 2 */
-	int			 eventTypes;	/* Event logging parameters */
-	int			 eventContext;	/* Next event context */
-	int			 eventLogSize;	/* Max number of cached events */
-	struct _mpt_ioctl_events *events;	/* pointer to event log */
-	u8			*cached_fw;	/* Pointer to FW */
-	dma_addr_t	 	cached_fw_dma;
-	int			 hs_reply_idx;
-#ifndef MFCNT
-	u32			 pad0;
-#else
-	u32			 mfcnt;
-#endif
-	u32			 NB_for_64_byte_frame;
-	u32			 hs_req[MPT_MAX_FRAME_SIZE/sizeof(u32)];
-	u16			 hs_reply[MPT_MAX_FRAME_SIZE/sizeof(u16)];
-	IOCFactsReply_t		 facts;
-	PortFactsReply_t	 pfacts[2];
-	FCPortPage0_t		 fc_port_page0[2];
-	LANPage0_t		 lan_cnfg_page0;
-	LANPage1_t		 lan_cnfg_page1;
-
-	u8			 ir_firmware; /* =1 if IR firmware detected */
-	/*
-	 * Description: errata_flag_1064
-	 * If a PCIX read occurs within 1 or 2 cycles after the chip receives
-	 * a split completion for a read data, an internal address pointer incorrectly
-	 * increments by 32 bytes
-	 */
-	int			 errata_flag_1064;
-	int			 aen_event_read_flag; /* flag to indicate event log was read*/
-	u8			 FirstWhoInit;
-	u8			 upload_fw;	/* If set, do a fw upload */
-	u8			 NBShiftFactor;  /* NB Shift Factor based on Block Size (Facts)  */
-	u8			 pad1[4];
-	u8			 DoneCtx;
-	u8			 TaskCtx;
-	u8			 InternalCtx;
-	struct list_head	 list;
-	struct net_device	*netdev;
-	struct list_head	 sas_topology;
-	struct mutex		 sas_topology_mutex;
-
-	struct workqueue_struct	*fw_event_q;
-	struct list_head	 fw_event_list;
-	spinlock_t		 fw_event_lock;
-	u8			 fw_events_off; /* if '1', then ignore events */
-	char 			 fw_event_q_name[MPT_KOBJ_NAME_LEN];
-
-	struct mutex		 sas_discovery_mutex;
-	u8			 sas_discovery_runtime;
-	u8			 sas_discovery_ignore_events;
-
-	/* port_info object for the host */
-	struct mptsas_portinfo	*hba_port_info;
-	u64			 hba_port_sas_addr;
-	u16			 hba_port_num_phy;
-	struct list_head	 sas_device_info_list;
-	struct mutex		 sas_device_info_mutex;
-	u8			 old_sas_discovery_protocal;
-	u8			 sas_discovery_quiesce_io;
-	int			 sas_index; /* index refrencing */
-	MPT_MGMT		 sas_mgmt;
-	MPT_MGMT		 mptbase_cmds; /* for sending config pages */
-	MPT_MGMT		 internal_cmds;
-	MPT_MGMT		 taskmgmt_cmds;
-	MPT_MGMT		 ioctl_cmds;
-	spinlock_t		 taskmgmt_lock; /* diagnostic reset lock */
-	int			 taskmgmt_in_progress;
-	u8			 taskmgmt_quiesce_io;
-	u8			 ioc_reset_in_progress;
-	u8			 reset_status;
-	u8			 wait_on_reset_completion;
-	MPT_SCHEDULE_TARGET_RESET schedule_target_reset;
-	MPT_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
-	struct work_struct	 sas_persist_task;
-
-	struct work_struct	 fc_setup_reset_work;
-	struct list_head	 fc_rports;
-	struct work_struct	 fc_lsc_work;
-	u8			 fc_link_speed[2];
-	spinlock_t		 fc_rescan_work_lock;
-	struct work_struct	 fc_rescan_work;
-	char			 fc_rescan_work_q_name[MPT_KOBJ_NAME_LEN];
-	struct workqueue_struct *fc_rescan_work_q;
-
-	/* driver forced bus resets count */
-	unsigned long		  hard_resets;
-	/* fw/external bus resets count */
-	unsigned long		  soft_resets;
-	/* cmd timeouts */
-	unsigned long		  timeouts;
-
-	struct scsi_cmnd	**ScsiLookup;
-	spinlock_t		  scsi_lookup_lock;
-	u64			dma_mask;
-	u32			  broadcast_aen_busy;
-	char			 reset_work_q_name[MPT_KOBJ_NAME_LEN];
-	struct workqueue_struct *reset_work_q;
-	struct delayed_work	 fault_reset_work;
-
-	u8			sg_addr_size;
-	u8			in_rescan;
-	u8			SGE_size;
-
-} MPT_ADAPTER;
-
-/*
- *  New return value convention:
- *    1 = Ok to free associated request frame
- *    0 = not Ok ...
- */
-typedef int (*MPT_CALLBACK)(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
-typedef int (*MPT_EVHANDLER)(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply);
-typedef int (*MPT_RESETHANDLER)(MPT_ADAPTER *ioc, int reset_phase);
-/* reset_phase defs */
-#define MPT_IOC_PRE_RESET		0
-#define MPT_IOC_POST_RESET		1
-#define MPT_IOC_SETUP_RESET		2
-
-/*
- * Invent MPT host event (super-set of MPI Events)
- * Fitted to 1030's 64-byte [max] request frame size
- */
-typedef struct _MPT_HOST_EVENT {
-	EventNotificationReply_t	 MpiEvent;	/* 8 32-bit words! */
-	u32				 pad[6];
-	void				*next;
-} MPT_HOST_EVENT;
-
-#define MPT_HOSTEVENT_IOC_BRINGUP	0x91
-#define MPT_HOSTEVENT_IOC_RECOVER	0x92
-
-/* Define the generic types based on the size
- * of the dma_addr_t type.
- */
-typedef struct _mpt_sge {
-	u32		FlagsLength;
-	dma_addr_t	Address;
-} MptSge_t;
-
-
-#define mpt_msg_flags(ioc) \
-	(ioc->sg_addr_size == sizeof(u64)) ?		\
-	MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : 		\
-	MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32
-
-#define MPT_SGE_FLAGS_64_BIT_ADDRESSING \
-	(MPI_SGE_FLAGS_64_BIT_ADDRESSING << MPI_SGE_FLAGS_SHIFT)
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- *  Funky (private) macros...
- */
-#include "mptdebug.h"
-
-#define MPT_INDEX_2_MFPTR(ioc,idx) \
-	(MPT_FRAME_HDR*)( (u8*)(ioc)->req_frames + (ioc)->req_sz * (idx) )
-
-#define MFPTR_2_MPT_INDEX(ioc,mf) \
-	(int)( ((u8*)mf - (u8*)(ioc)->req_frames) / (ioc)->req_sz )
-
-#define MPT_INDEX_2_RFPTR(ioc,idx) \
-	(MPT_FRAME_HDR*)( (u8*)(ioc)->reply_frames + (ioc)->req_sz * (idx) )
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
-#define SCSI_STD_SENSE_BYTES    18
-#define SCSI_STD_INQUIRY_BYTES  36
-#define SCSI_MAX_INQUIRY_BYTES  96
-
-/*
- * MPT_SCSI_HOST defines - Used by the IOCTL and the SCSI drivers
- * Private to the driver.
- */
-/* LOCAL structure and fields used when processing
- * internally generated commands. These include:
- * bus scan, dv and config requests.
- */
-typedef struct _MPT_LOCAL_REPLY {
-	ConfigPageHeader_t header;
-	int	completion;
-	u8	sense[SCSI_STD_SENSE_BYTES];
-	u8	scsiStatus;
-	u8	skip;
-	u32	pad;
-} MPT_LOCAL_REPLY;
-
-
-/* The TM_STATE variable is used to provide strict single threading of TM
- * requests as well as communicate TM error conditions.
- */
-#define TM_STATE_NONE          (0)
-#define	TM_STATE_IN_PROGRESS   (1)
-#define	TM_STATE_ERROR	       (2)
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- *	More Dynamic Multi-Pathing stuff...
- */
-
-/* Forward decl, a strange C thing, to prevent gcc compiler warnings */
-struct scsi_cmnd;
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * Generic structure passed to the base mpt_config function.
- */
-typedef struct _x_config_parms {
-	union {
-		ConfigExtendedPageHeader_t	*ehdr;
-		ConfigPageHeader_t	*hdr;
-	} cfghdr;
-	dma_addr_t		 physAddr;
-	u32			 pageAddr;	/* properly formatted */
-	u16			 status;
-	u8			 action;
-	u8			 dir;
-	u8			 timeout;	/* seconds */
-} CONFIGPARMS;
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- *  Public entry points...
- */
-extern int	 mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id);
-extern void	 mpt_detach(struct pci_dev *pdev);
-#ifdef CONFIG_PM
-extern int	 mpt_suspend(struct pci_dev *pdev, pm_message_t state);
-extern int	 mpt_resume(struct pci_dev *pdev);
-#endif
-extern u8	 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass,
-		char *func_name);
-extern void	 mpt_deregister(u8 cb_idx);
-extern int	 mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc);
-extern void	 mpt_event_deregister(u8 cb_idx);
-extern int	 mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func);
-extern void	 mpt_reset_deregister(u8 cb_idx);
-extern int	 mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx);
-extern void	 mpt_device_driver_deregister(u8 cb_idx);
-extern MPT_FRAME_HDR	*mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc);
-extern void	 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
-extern void	 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
-extern void	 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
-
-extern int	 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag);
-extern int	 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp);
-extern u32	 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked);
-extern void	 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan);
-extern int	 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
-extern int	 mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
-extern int	 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
-extern int	 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size);
-extern void	 mpt_free_fw_memory(MPT_ADAPTER *ioc);
-extern int	 mpt_findImVolumes(MPT_ADAPTER *ioc);
-extern int	 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
-extern int	 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk);
-extern int	mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
-		pRaidPhysDiskPage1_t phys_disk);
-extern int	mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc,
-		u8 phys_disk_num);
-extern int	 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc);
-extern void	 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc);
-extern void     mpt_halt_firmware(MPT_ADAPTER *ioc);
-
-
-/*
- *  Public data decl's...
- */
-extern struct list_head	  ioc_list;
-extern int mpt_fwfault_debug;
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-#endif		/* } __KERNEL__ */
-
-#ifdef CONFIG_64BIT
-#define CAST_U32_TO_PTR(x)	((void *)(u64)x)
-#define CAST_PTR_TO_U32(x)	((u32)(u64)x)
-#else
-#define CAST_U32_TO_PTR(x)	((void *)x)
-#define CAST_PTR_TO_U32(x)	((u32)x)
-#endif
-
-#define MPT_PROTOCOL_FLAGS_c_c_c_c(pflags) \
-	((pflags) & MPI_PORTFACTS_PROTOCOL_INITIATOR)	? 'I' : 'i',	\
-	((pflags) & MPI_PORTFACTS_PROTOCOL_TARGET)	? 'T' : 't',	\
-	((pflags) & MPI_PORTFACTS_PROTOCOL_LAN)		? 'L' : 'l',	\
-	((pflags) & MPI_PORTFACTS_PROTOCOL_LOGBUSADDR)	? 'B' : 'b'
-
-/*
- *  Shifted SGE Defines - Use in SGE with FlagsLength member.
- *  Otherwise, use MPI_xxx defines (refer to "lsi/mpi.h" header).
- *  Defaults: 32 bit SGE, SYSTEM_ADDRESS if direction bit is 0, read
- */
-#define MPT_TRANSFER_IOC_TO_HOST		(0x00000000)
-#define MPT_TRANSFER_HOST_TO_IOC		(0x04000000)
-#define MPT_SGE_FLAGS_LAST_ELEMENT		(0x80000000)
-#define MPT_SGE_FLAGS_END_OF_BUFFER		(0x40000000)
-#define MPT_SGE_FLAGS_LOCAL_ADDRESS		(0x08000000)
-#define MPT_SGE_FLAGS_DIRECTION			(0x04000000)
-#define MPT_SGE_FLAGS_END_OF_LIST		(0x01000000)
-
-#define MPT_SGE_FLAGS_TRANSACTION_ELEMENT	(0x00000000)
-#define MPT_SGE_FLAGS_SIMPLE_ELEMENT		(0x10000000)
-#define MPT_SGE_FLAGS_CHAIN_ELEMENT		(0x30000000)
-#define MPT_SGE_FLAGS_ELEMENT_MASK		(0x30000000)
-
-#define MPT_SGE_FLAGS_SSIMPLE_READ \
-	(MPT_SGE_FLAGS_LAST_ELEMENT |	\
-	 MPT_SGE_FLAGS_END_OF_BUFFER |	\
-	 MPT_SGE_FLAGS_END_OF_LIST |	\
-	 MPT_SGE_FLAGS_SIMPLE_ELEMENT |	\
-	 MPT_TRANSFER_IOC_TO_HOST)
-#define MPT_SGE_FLAGS_SSIMPLE_WRITE \
-	(MPT_SGE_FLAGS_LAST_ELEMENT |	\
-	 MPT_SGE_FLAGS_END_OF_BUFFER |	\
-	 MPT_SGE_FLAGS_END_OF_LIST |	\
-	 MPT_SGE_FLAGS_SIMPLE_ELEMENT |	\
-	 MPT_TRANSFER_HOST_TO_IOC)
-
-/*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-#endif
-