Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 310 deletions

diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/mainstone-wm97xx.c b/ANDROID_3.4.5/drivers/input/touchscreen/mainstone-wm97xx.c
deleted file mode 100644
index 7d2b2136..00000000
--- a/ANDROID_3.4.5/drivers/input/touchscreen/mainstone-wm97xx.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * mainstone-wm97xx.c  --  Mainstone Continuous Touch screen driver for
- *                         Wolfson WM97xx AC97 Codecs.
- *
- * Copyright 2004, 2007 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood <lrg@slimlogic.co.uk>
- * Parts Copyright : Ian Molton <spyro@f2s.com>
- *                   Andrew Zabolotny <zap@homelink.ru>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- * Notes:
- *     This is a wm97xx extended touch driver to capture touch
- *     data in a continuous manner on the Intel XScale architecture
- *
- *  Features:
- *       - codecs supported:- WM9705, WM9712, WM9713
- *       - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/wm97xx.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/regs-ac97.h>
-
-#include <asm/mach-types.h>
-
-struct continuous {
-	u16 id;    /* codec id */
-	u8 code;   /* continuous code */
-	u8 reads;  /* number of coord reads per read cycle */
-	u32 speed; /* number of coords per second */
-};
-
-#define WM_READS(sp) ((sp / HZ) + 1)
-
-static const struct continuous cinfo[] = {
-	{WM9705_ID2, 0, WM_READS(94), 94},
-	{WM9705_ID2, 1, WM_READS(188), 188},
-	{WM9705_ID2, 2, WM_READS(375), 375},
-	{WM9705_ID2, 3, WM_READS(750), 750},
-	{WM9712_ID2, 0, WM_READS(94), 94},
-	{WM9712_ID2, 1, WM_READS(188), 188},
-	{WM9712_ID2, 2, WM_READS(375), 375},
-	{WM9712_ID2, 3, WM_READS(750), 750},
-	{WM9713_ID2, 0, WM_READS(94), 94},
-	{WM9713_ID2, 1, WM_READS(120), 120},
-	{WM9713_ID2, 2, WM_READS(154), 154},
-	{WM9713_ID2, 3, WM_READS(188), 188},
-};
-
-/* continuous speed index */
-static int sp_idx;
-static u16 last, tries;
-static int irq;
-
-/*
- * Pen sampling frequency (Hz) in continuous mode.
- */
-static int cont_rate = 200;
-module_param(cont_rate, int, 0);
-MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
-
-/*
- * Pen down detection.
- *
- * This driver can either poll or use an interrupt to indicate a pen down
- * event. If the irq request fails then it will fall back to polling mode.
- */
-static int pen_int;
-module_param(pen_int, int, 0);
-MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
-
-/*
- * Pressure readback.
- *
- * Set to 1 to read back pen down pressure
- */
-static int pressure;
-module_param(pressure, int, 0);
-MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
-
-/*
- * AC97 touch data slot.
- *
- * Touch screen readback data ac97 slot
- */
-static int ac97_touch_slot = 5;
-module_param(ac97_touch_slot, int, 0);
-MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
-
-
-/* flush AC97 slot 5 FIFO on pxa machines */
-#ifdef CONFIG_PXA27x
-static void wm97xx_acc_pen_up(struct wm97xx *wm)
-{
-	schedule_timeout_uninterruptible(1);
-
-	while (MISR & (1 << 2))
-		MODR;
-}
-#else
-static void wm97xx_acc_pen_up(struct wm97xx *wm)
-{
-	unsigned int count;
-
-	schedule_timeout_uninterruptible(1);
-
-	for (count = 0; count < 16; count++)
-		MODR;
-}
-#endif
-
-static int wm97xx_acc_pen_down(struct wm97xx *wm)
-{
-	u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
-	int reads = 0;
-
-	/* When the AC97 queue has been drained we need to allow time
-	 * to buffer up samples otherwise we end up spinning polling
-	 * for samples.  The controller can't have a suitably low
-	 * threshold set to use the notifications it gives.
-	 */
-	schedule_timeout_uninterruptible(1);
-
-	if (tries > 5) {
-		tries = 0;
-		return RC_PENUP;
-	}
-
-	x = MODR;
-	if (x == last) {
-		tries++;
-		return RC_AGAIN;
-	}
-	last = x;
-	do {
-		if (reads)
-			x = MODR;
-		y = MODR;
-		if (pressure)
-			p = MODR;
-
-		dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n",
-			x, y, p);
-
-		/* are samples valid */
-		if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X ||
-		    (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y ||
-		    (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES)
-			goto up;
-
-		/* coordinate is good */
-		tries = 0;
-		input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
-		input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
-		input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
-		input_report_key(wm->input_dev, BTN_TOUCH, (p != 0));
-		input_sync(wm->input_dev);
-		reads++;
-	} while (reads < cinfo[sp_idx].reads);
-up:
-	return RC_PENDOWN | RC_AGAIN;
-}
-
-static int wm97xx_acc_startup(struct wm97xx *wm)
-{
-	int idx = 0, ret = 0;
-
-	/* check we have a codec */
-	if (wm->ac97 == NULL)
-		return -ENODEV;
-
-	/* Go you big red fire engine */
-	for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
-		if (wm->id != cinfo[idx].id)
-			continue;
-		sp_idx = idx;
-		if (cont_rate <= cinfo[idx].speed)
-			break;
-	}
-	wm->acc_rate = cinfo[sp_idx].code;
-	wm->acc_slot = ac97_touch_slot;
-	dev_info(wm->dev,
-		 "mainstone accelerated touchscreen driver, %d samples/sec\n",
-		 cinfo[sp_idx].speed);
-
-	/* IRQ driven touchscreen is used on Palm hardware */
-	if (machine_is_palmt5() || machine_is_palmtx() || machine_is_palmld()) {
-		pen_int = 1;
-		irq = 27;
-		/* There is some obscure mutant of WM9712 interbred with WM9713
-		 * used on Palm HW */
-		wm->variant = WM97xx_WM1613;
-	} else if (machine_is_mainstone() && pen_int)
-		irq = 4;
-
-	if (irq) {
-		ret = gpio_request(irq, "Touchscreen IRQ");
-		if (ret)
-			goto out;
-
-		ret = gpio_direction_input(irq);
-		if (ret) {
-			gpio_free(irq);
-			goto out;
-		}
-
-		wm->pen_irq = gpio_to_irq(irq);
-		irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
-	} else /* pen irq not supported */
-		pen_int = 0;
-
-	/* codec specific irq config */
-	if (pen_int) {
-		switch (wm->id) {
-		case WM9705_ID2:
-			break;
-		case WM9712_ID2:
-		case WM9713_ID2:
-			/* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
-			wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
-					   WM97XX_GPIO_POL_HIGH,
-					   WM97XX_GPIO_STICKY,
-					   WM97XX_GPIO_WAKE);
-			wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
-					   WM97XX_GPIO_POL_HIGH,
-					   WM97XX_GPIO_NOTSTICKY,
-					   WM97XX_GPIO_NOWAKE);
-			break;
-		default:
-			dev_err(wm->dev,
-				"pen down irq not supported on this device\n");
-			pen_int = 0;
-			break;
-		}
-	}
-
-out:
-	return ret;
-}
-
-static void wm97xx_acc_shutdown(struct wm97xx *wm)
-{
-	/* codec specific deconfig */
-	if (pen_int) {
-		if (irq)
-			gpio_free(irq);
-		wm->pen_irq = 0;
-	}
-}
-
-static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
-{
-	if (enable)
-		enable_irq(wm->pen_irq);
-	else
-		disable_irq_nosync(wm->pen_irq);
-}
-
-static struct wm97xx_mach_ops mainstone_mach_ops = {
-	.acc_enabled = 1,
-	.acc_pen_up = wm97xx_acc_pen_up,
-	.acc_pen_down = wm97xx_acc_pen_down,
-	.acc_startup = wm97xx_acc_startup,
-	.acc_shutdown = wm97xx_acc_shutdown,
-	.irq_enable = wm97xx_irq_enable,
-	.irq_gpio = WM97XX_GPIO_2,
-};
-
-static int mainstone_wm97xx_probe(struct platform_device *pdev)
-{
-	struct wm97xx *wm = platform_get_drvdata(pdev);
-
-	return wm97xx_register_mach_ops(wm, &mainstone_mach_ops);
-}
-
-static int mainstone_wm97xx_remove(struct platform_device *pdev)
-{
-	struct wm97xx *wm = platform_get_drvdata(pdev);
-
-	wm97xx_unregister_mach_ops(wm);
-	return 0;
-}
-
-static struct platform_driver mainstone_wm97xx_driver = {
-	.probe = mainstone_wm97xx_probe,
-	.remove = mainstone_wm97xx_remove,
-	.driver = {
-		.name = "wm97xx-touch",
-	},
-};
-module_platform_driver(mainstone_wm97xx_driver);
-
-/* Module information */
-MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
-MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone");
-MODULE_LICENSE("GPL");