Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 154 deletions

diff --git a/ANDROID_3.4.5/drivers/input/mouse/trackpoint.h b/ANDROID_3.4.5/drivers/input/mouse/trackpoint.h
deleted file mode 100644
index e558a709..00000000
--- a/ANDROID_3.4.5/drivers/input/mouse/trackpoint.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * IBM TrackPoint PS/2 mouse driver
- *
- * Stephen Evanchik <evanchsa@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifndef _TRACKPOINT_H
-#define _TRACKPOINT_H
-
-/*
- * These constants are from the TrackPoint System
- * Engineering documentation Version 4 from IBM Watson
- * research:
- *	http://wwwcssrv.almaden.ibm.com/trackpoint/download.html
- */
-
-#define TP_COMMAND		0xE2	/* Commands start with this */
-
-#define TP_READ_ID		0xE1	/* Sent for device identification */
-#define TP_MAGIC_IDENT		0x01	/* Sent after a TP_READ_ID followed */
-					/* by the firmware ID */
-
-
-/*
- * Commands
- */
-#define TP_RECALIB		0x51	/* Recalibrate */
-#define TP_POWER_DOWN		0x44	/* Can only be undone through HW reset */
-#define TP_EXT_DEV		0x21	/* Determines if external device is connected (RO) */
-#define TP_EXT_BTN		0x4B	/* Read extended button status */
-#define TP_POR			0x7F	/* Execute Power on Reset */
-#define TP_POR_RESULTS		0x25	/* Read Power on Self test results */
-#define TP_DISABLE_EXT		0x40	/* Disable external pointing device */
-#define TP_ENABLE_EXT		0x41	/* Enable external pointing device */
-
-/*
- * Mode manipulation
- */
-#define TP_SET_SOFT_TRANS	0x4E	/* Set mode */
-#define TP_CANCEL_SOFT_TRANS	0xB9	/* Cancel mode */
-#define TP_SET_HARD_TRANS	0x45	/* Mode can only be set */
-
-
-/*
- * Register oriented commands/properties
- */
-#define TP_WRITE_MEM		0x81
-#define TP_READ_MEM		0x80	/* Not used in this implementation */
-
-/*
-* RAM Locations for properties
- */
-#define TP_SENS			0x4A	/* Sensitivity */
-#define TP_MB			0x4C	/* Read Middle Button Status (RO) */
-#define TP_INERTIA		0x4D	/* Negative Inertia */
-#define TP_SPEED		0x60	/* Speed of TP Cursor */
-#define TP_REACH		0x57	/* Backup for Z-axis press */
-#define TP_DRAGHYS		0x58	/* Drag Hysteresis */
-					/* (how hard it is to drag */
-					/* with Z-axis pressed) */
-
-#define TP_MINDRAG		0x59	/* Minimum amount of force needed */
-					/* to trigger dragging */
-
-#define TP_THRESH		0x5C	/* Minimum value for a Z-axis press */
-#define TP_UP_THRESH		0x5A	/* Used to generate a 'click' on Z-axis */
-#define TP_Z_TIME		0x5E	/* How sharp of a press */
-#define TP_JENKS_CURV		0x5D	/* Minimum curvature for double click */
-
-/*
- * Toggling Flag bits
- */
-#define TP_TOGGLE		0x47	/* Toggle command */
-
-#define TP_TOGGLE_MB		0x23	/* Disable/Enable Middle Button */
-#define TP_MASK_MB			0x01
-#define TP_TOGGLE_EXT_DEV	0x23	/* Disable external device */
-#define TP_MASK_EXT_DEV			0x02
-#define TP_TOGGLE_DRIFT		0x23	/* Drift Correction */
-#define TP_MASK_DRIFT			0x80
-#define TP_TOGGLE_BURST		0x28	/* Burst Mode */
-#define TP_MASK_BURST			0x80
-#define TP_TOGGLE_PTSON		0x2C	/* Press to Select */
-#define TP_MASK_PTSON			0x01
-#define TP_TOGGLE_HARD_TRANS	0x2C	/* Alternate method to set Hard Transparency */
-#define TP_MASK_HARD_TRANS		0x80
-#define TP_TOGGLE_TWOHAND	0x2D	/* Two handed */
-#define TP_MASK_TWOHAND			0x01
-#define TP_TOGGLE_STICKY_TWO	0x2D	/* Sticky two handed */
-#define TP_MASK_STICKY_TWO		0x04
-#define TP_TOGGLE_SKIPBACK	0x2D	/* Suppress movement after drag release */
-#define TP_MASK_SKIPBACK		0x08
-#define TP_TOGGLE_SOURCE_TAG	0x20	/* Bit 3 of the first packet will be set to
-					   to the origin of the packet (external or TP) */
-#define TP_MASK_SOURCE_TAG		0x80
-#define TP_TOGGLE_EXT_TAG	0x22	/* Bit 3 of the first packet coming from the
-					   external device will be forced to 1 */
-#define TP_MASK_EXT_TAG			0x04
-
-
-/* Power on Self Test Results */
-#define TP_POR_SUCCESS		0x3B
-
-/*
- * Default power on values
- */
-#define TP_DEF_SENS		0x80
-#define TP_DEF_INERTIA		0x06
-#define TP_DEF_SPEED		0x61
-#define TP_DEF_REACH		0x0A
-
-#define TP_DEF_DRAGHYS		0xFF
-#define TP_DEF_MINDRAG		0x14
-
-#define TP_DEF_THRESH		0x08
-#define TP_DEF_UP_THRESH	0xFF
-#define TP_DEF_Z_TIME		0x26
-#define TP_DEF_JENKS_CURV	0x87
-
-/* Toggles */
-#define TP_DEF_MB		0x00
-#define TP_DEF_PTSON		0x00
-#define TP_DEF_SKIPBACK		0x00
-#define TP_DEF_EXT_DEV		0x00	/* 0 means enabled */
-
-#define MAKE_PS2_CMD(params, results, cmd) ((params<<12) | (results<<8) | (cmd))
-
-struct trackpoint_data
-{
-	unsigned char sensitivity, speed, inertia, reach;
-	unsigned char draghys, mindrag;
-	unsigned char thresh, upthresh;
-	unsigned char ztime, jenks;
-
-	unsigned char press_to_select;
-	unsigned char skipback;
-
-	unsigned char ext_dev;
-};
-
-#ifdef CONFIG_MOUSE_PS2_TRACKPOINT
-int trackpoint_detect(struct psmouse *psmouse, bool set_properties);
-#else
-inline int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
-{
-	return -ENOSYS;
-}
-#endif /* CONFIG_MOUSE_PS2_TRACKPOINT */
-
-#endif /* _TRACKPOINT_H */