init android origin source code

1 files changed, 225 insertions, 0 deletions

diff --git a/ANDROID_3.4.5/drivers/cpufreq/Kconfig b/ANDROID_3.4.5/drivers/cpufreq/Kconfig
new file mode 100644
index 00000000..57f96ebb
--- /dev/null
+++ b/ANDROID_3.4.5/drivers/cpufreq/Kconfig
@@ -0,0 +1,225 @@
+menu "CPU Frequency scaling"
+
+config CPU_FREQ
+	bool "CPU Frequency scaling"
+	help
+	  CPU Frequency scaling allows you to change the clock speed of 
+	  CPUs on the fly. This is a nice method to save power, because 
+	  the lower the CPU clock speed, the less power the CPU consumes.
+
+	  Note that this driver doesn't automatically change the CPU
+	  clock speed, you need to either enable a dynamic cpufreq governor
+	  (see below) after boot, or use a userspace tool.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+if CPU_FREQ
+
+config CPU_FREQ_TABLE
+	tristate
+
+config CPU_FREQ_STAT
+	tristate "CPU frequency translation statistics"
+	select CPU_FREQ_TABLE
+	default y
+	help
+	  This driver exports CPU frequency statistics information through sysfs
+	  file system.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_stats.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_STAT_DETAILS
+	bool "CPU frequency translation statistics details"
+	depends on CPU_FREQ_STAT
+	help
+	  This will show detail CPU frequency translation table in sysfs file
+	  system.
+
+	  If in doubt, say N.
+
+choice
+	prompt "Default CPUFreq governor"
+	default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110
+	default CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+	help
+	  This option sets which CPUFreq governor shall be loaded at
+	  startup. If in doubt, select 'performance'.
+
+config CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+	bool "performance"
+	select CPU_FREQ_GOV_PERFORMANCE
+	help
+	  Use the CPUFreq governor 'performance' as default. This sets
+	  the frequency statically to the highest frequency supported by
+	  the CPU.
+
+config CPU_FREQ_DEFAULT_GOV_POWERSAVE
+	bool "powersave"
+	depends on EXPERT
+	select CPU_FREQ_GOV_POWERSAVE
+	help
+	  Use the CPUFreq governor 'powersave' as default. This sets
+	  the frequency statically to the lowest frequency supported by
+	  the CPU.
+
+config CPU_FREQ_DEFAULT_GOV_USERSPACE
+	bool "userspace"
+	select CPU_FREQ_GOV_USERSPACE
+	help
+	  Use the CPUFreq governor 'userspace' as default. This allows
+	  you to set the CPU frequency manually or when a userspace 
+	  program shall be able to set the CPU dynamically without having
+	  to enable the userspace governor manually.
+
+config CPU_FREQ_DEFAULT_GOV_ONDEMAND
+	bool "ondemand"
+	select CPU_FREQ_GOV_ONDEMAND
+	select CPU_FREQ_GOV_PERFORMANCE
+	help
+	  Use the CPUFreq governor 'ondemand' as default. This allows
+	  you to get a full dynamic frequency capable system by simply
+	  loading your cpufreq low-level hardware driver.
+	  Be aware that not all cpufreq drivers support the ondemand
+	  governor. If unsure have a look at the help section of the
+	  driver. Fallback governor will be the performance governor.
+
+config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
+	bool "conservative"
+	select CPU_FREQ_GOV_CONSERVATIVE
+	select CPU_FREQ_GOV_PERFORMANCE
+	help
+	  Use the CPUFreq governor 'conservative' as default. This allows
+	  you to get a full dynamic frequency capable system by simply
+	  loading your cpufreq low-level hardware driver.
+	  Be aware that not all cpufreq drivers support the conservative
+	  governor. If unsure have a look at the help section of the
+	  driver. Fallback governor will be the performance governor.
+
+config CPU_FREQ_DEFAULT_GOV_INTERACTIVE
+	bool "interactive"
+	select CPU_FREQ_GOV_INTERACTIVE
+	help
+	  Use the CPUFreq governor 'interactive' as default. This allows
+	  you to get a full dynamic cpu frequency capable system by simply
+	  loading your cpufreq low-level hardware driver, using the
+	  'interactive' governor for latency-sensitive workloads.
+
+endchoice
+
+config CPU_FREQ_GOV_PERFORMANCE
+	tristate "'performance' governor"
+	help
+	  This cpufreq governor sets the frequency statically to the
+	  highest available CPU frequency.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_performance.
+
+	  If in doubt, say Y.
+
+config CPU_FREQ_GOV_POWERSAVE
+	tristate "'powersave' governor"
+	help
+	  This cpufreq governor sets the frequency statically to the
+	  lowest available CPU frequency.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_powersave.
+
+	  If in doubt, say Y.
+
+config CPU_FREQ_GOV_USERSPACE
+	tristate "'userspace' governor for userspace frequency scaling"
+	help
+	  Enable this cpufreq governor when you either want to set the
+	  CPU frequency manually or when a userspace program shall
+	  be able to set the CPU dynamically, like on LART 
+	  <http://www.lartmaker.nl/>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_userspace.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say Y.
+
+config CPU_FREQ_GOV_ONDEMAND
+	tristate "'ondemand' cpufreq policy governor"
+	select CPU_FREQ_TABLE
+	help
+	  'ondemand' - This driver adds a dynamic cpufreq policy governor.
+	  The governor does a periodic polling and 
+	  changes frequency based on the CPU utilization.
+	  The support for this governor depends on CPU capability to
+	  do fast frequency switching (i.e, very low latency frequency
+	  transitions). 
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_ondemand.
+
+	  For details, take a look at linux/Documentation/cpu-freq.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_GOV_INTERACTIVE
+	tristate "'interactive' cpufreq policy governor"
+	help
+	  'interactive' - This driver adds a dynamic cpufreq policy governor
+	  designed for latency-sensitive workloads.
+
+	  This governor attempts to reduce the latency of clock
+	  increases so that the system is more responsive to
+	  interactive workloads.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_interactive.
+
+	  For details, take a look at linux/Documentation/cpu-freq.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_GOV_CONSERVATIVE
+	tristate "'conservative' cpufreq governor"
+	depends on CPU_FREQ
+	help
+	  'conservative' - this driver is rather similar to the 'ondemand'
+	  governor both in its source code and its purpose, the difference is
+	  its optimisation for better suitability in a battery powered
+	  environment.  The frequency is gracefully increased and decreased
+	  rather than jumping to 100% when speed is required.
+
+	  If you have a desktop machine then you should really be considering
+	  the 'ondemand' governor instead, however if you are using a laptop,
+	  PDA or even an AMD64 based computer (due to the unacceptable
+	  step-by-step latency issues between the minimum and maximum frequency
+	  transitions in the CPU) you will probably want to use this governor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpufreq_conservative.
+
+	  For details, take a look at linux/Documentation/cpu-freq.
+
+	  If in doubt, say N.
+
+menu "x86 CPU frequency scaling drivers"
+depends on X86
+source "drivers/cpufreq/Kconfig.x86"
+endmenu
+
+menu "ARM CPU frequency scaling drivers"
+depends on ARM
+source "drivers/cpufreq/Kconfig.arm"
+endmenu
+
+menu "PowerPC CPU frequency scaling drivers"
+depends on PPC32 || PPC64
+source "drivers/cpufreq/Kconfig.powerpc"
+endmenu
+
+endif
+endmenu